If core packages are overridden, CONFIG_OVERRIDE_PKGS is set
based on the scan order of packages, which eventually causes
that config value to be modified on each build and with
that causes the build process to warn for configuration
being out of sync.

This commit changes the CONFIG_OVERRIDE_PKGS to be sorted
and prevents that false warning.

Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>

In dc929174 there was introduced login.sh wrapper which allows
configuration of console passwords via UCI system ttylogin config
option.

Signed-off-by: Petr Štetiar <ynezz@true.cz>

Switch to xz compression instead of using bz2.
Saves about 20% of total size (ar71xx)

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>

Update libreadline to 7.0

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>

Update libconfig to 1.5

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>

Updates e2fsprogs to 1.43.3

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>

Updates LibreSSL to 2.5.0 and switches from main site to mirrors as primary source.

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>

Update libnftnl to 1.0.6

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>

Updates lldpd to 0.9.5

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>

Switch to xz tarball, there's no point pulling two different tarballs of the same source code (tools/libtool uses xz).

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>

Update to 3.3

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>

Update to 3.2.28
Remove patch as its in upstream

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>

* Update to 1.0.4
* Remove patch as it's upstreamed

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>

* Updates to 0.7
* Switches tarball to xz

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>

Updates to 6.29

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>

Switch to xz tarball
Update USB ID-database to snapshot 2016-07-21

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>

remove the "Error fixing up TRX header" message which is misleading.

Signed-off-by: John Crispin <john@phrozen.org>

This patch adds support for the Airtight C-60.

SOC:	Atheros AR9344 rev 2 (CPU:560.000MHz)
RAM:	128 MiB
NOR:	MX25L3205D 4MiB
NAND:	ST Micro NAND 32MiB 3,3V 8-bit
SW-NET:	AR8327N (2 Ports)
WLAN1:	Dual-Band AR9340 Rev:2 (built-in SoC)
WLAN2:	Dual-Band AR9300 Rev:4 PCIe Chip

The switch is setup for an accesspoint:
	LAN1: (gigabit) is the wan-port.
	LAN2: (fast ethernet) is bridged with the br-lan.

Flashing Guide (via initramfs):
  1. Connect a PC to the serial port of the C-60.
     power up the C-60.

     Enter u-boot command prompt:
     #> nand erase
     #> setenv bootcmd "bootm 0x9f060000"
     #> saveenv
     #> setenv ipaddr 192.168.1.1
     #> setenv netmask 255.255.255.0
     #> setenv serverip 192.168.1.100
     #> setenv bootfile lede-ar71xx-nand-c-60-initramfs-kernel.bin
     #> tftpboot
     #> bootm

  2. Wait for the C-60 to boot LEDE.
     On the root prompt. Enter:
     # ubiformat /dev/mtd4
     # ubiattach -p /dev/mtd4

  3. After that copy the sysupgrade.tar onto the router and run:
     # sysupgrade sysupgrade.tar

     to flash the image.

Special thanks to Chris Blake <chrisrblake93@gmail.com>. He provided
a C-60 unit and he helped with debugging the switch, LEDs and platfrom
support.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>

The commit "generic: ar8216: add sanity check to ar8216_probe"
(774da6c7) stated that PHY IDs
should be checked at address 0-4. However, the PHY 4 was
never check by the loop. This patch extends the check to be
similar to the Atheors SDK. It tries all 4 ports and skips
unconnected PHYs if necessary. If it cannot find any familiar
PHYs, it will prevent the phy driver from initializing.

This patch is necessary for the C-60. It doesn't have a
PHY at port 3, so this caused the check in ar8xxx_is_possible
to fail. As a result, the ethernet ports on the C-60 didn't
work.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>

Signed-off-by: Henryk Heisig <hyniu@o2.pl>

Signed-off-by: Henryk Heisig <hyniu@o2.pl>

The WBMR boards are the only ones in the whole tree selecting the wpad
and hostapd-utils package by default.

Remove the wps uci-default script as well, there is no obvious reason
why the wps config need to be set only for this board.

Signed-off-by: Mathias Kresin <dev@kresin.me>

Fix the typo in the gpio-keys-polled compatible string.

Signed-off-by: Mathias Kresin <dev@kresin.me>

All of the touched boards don't have an ethernet port. Allow to use the
wps button on these boards to enable the wireless radio after boot.

The force enabled wireless for the DCH-M225 is removed. It is reckless
to bring up an unencrypted wireless network by default these days.

Using the wps button to bring up the radio seam to me the better
approach.

Signed-off-by: Mathias Kresin <dev@kresin.me>

Use the edimax uImage splitter instead of the fixed size rootfs
partition.

Signed-off-by: Mathias Kresin <dev@kresin.me>

Images installed via TFTP recovery or the Edimax webinterface of the
3g-6200n(l) are writting with the edimax header to flash.

Use only one image type for these boards. The migration to the
factory only images need to be done via TFTP recovery.

Use the same start address for the 3g-6200n(l) factory images as the
stock firmware images.

Thanks to Jan Dostrasil for reporting all the issues of the 3g-6200nl
and the patient testing of all changes.

Signed-off-by: Mathias Kresin <dev@kresin.me>

According to the author the code was added to in preparation for adding
support for a new board. The patch for the board was never send and the
code never really tested.

The edimax header starting with the edimax magic is put in front of the
uImage header. There is no special uImage header used. Means, default
magic and the type field is set to kernel as usual.

Signed-off-by: Mathias Kresin <dev@kresin.me>

edimax parser fix

The return value of the find_header function need to be added to the
uimage_size, otherwise mtd_find_rootfs_from() might search for a rootfs
within a custom header and fails.

Signed-off-by: Mathias Kresin <dev@kresin.me>

Assign the reset functionality to the wps/reset buttons. Use the wlan
switch of the 6200n to enable/disable wlan.

Add the internet led of the 6200nl and use the led for boot status
indication

Signed-off-by: Mathias Kresin <dev@kresin.me>

With 3a9752bb and later changes to
ramips_set_preinit_iface() the default vlan config applied during
preinit was changed. These changes were made without updating the
default network config to ensure that vlan interfaces used for lan/wan
are still configured.

Fix the issue by using the default all LAN portmap and disabling not
connected switch ports using portdisable device tree parameter.

Signed-off-by: Mathias Kresin <dev@kresin.me>

With de510265 the explicit tagging of
the CPU port was removed. This leads to a not working default network
config, with vlans enabled but disabled CPU tagging, for boards where
all switch ports are having the same role.

In case the ports are having different roles set, tagging is is set
implicit for the CPU port by ucidef_add_switch().

Signed-off-by: Mathias Kresin <dev@kresin.me>

Don't set the lan/wan interface when using ucidef_add_switch. This
results into a wan interface albeit all ports a annotated as lan ports.

ucidef_add_switch takes care of setting the correct lan/wan interface
according to the annotation of the ports.

Signed-off-by: Mathias Kresin <dev@kresin.me>

luci using ustream-mbedtls is extremely slow vs ustream-polarssl.
polarssl alias mbedtls v1 is configured to use NIST prime speed
optimisation, so no longer disable the default optimisation for
mbedtls v2.

Compile & run tested: Archer C7v2

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
[Jo-Philipp Wich: refresh patch to use common format]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>

- unify configs of host/target
- disable stuff to decrease build time
- disable interactive gettextize: see
http://lists.busybox.net/pipermail/buildroot/2014-April/093394.html



Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

0.19.8.1 gettext-full uses "archive-version" of 0.19.8
to replace makros, leading to breakage of PKG_FIXUP:=gettext-version

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

COPYING is not present in $(LINUX_DIR) on imagebuilder and prevents a
successful image creation.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Updates binutils to 2.27

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>

Add binutils 2.27 to toolchain

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [refresh patches]