Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

Funnel the required LDFLAGS environment through HOST_CONFIGURE_CMD for now
as the HOST_CONFIGURE_VARS semantics are completely broken.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

LibreSSL's libcrypto.so has an indirect dependency to librt for clock_gettime()
on Linux.

Use pkg-config to portably discover the required linker flags.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

LibreSSL's libcrypto.so has an indirect dependency to librt for clock_gettime()
on Linux.

Use pkg-config to portably discover the required linker flags.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

Ensure that pkg-config is available before building libressl as we're going
to need it for setting proper link flags in utilities requiring libcrypto.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Useful for having a more consistent build environment and finding API
issues faster

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Updates GMP to 6.1.2

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>

Update xz to 5.2.3

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

graphite is disabled by default and it's not worth carrying ppl and
cloog for supporting this feature on the old gcc 4.8, which is only used
for ARC

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Also use default defintions for PKG_SOURCE_SUBDIR, PKG_SOURCE

Signed-off-by: Felix Fietkau <nbd@nbd.name>

CPU: MT7620N 580MHz
Flash: 8MB
RAM: 64MB
build-in modem 3G/4G
four ethernet port 10/100Mbps

Signed-off-by: Henryk Heisig <hyniu@o2.pl>

Signed-off-by: Radek Dostál <rd@radekdostal.com>
[Jo-Philipp Wich: use .support_trail member]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>

The firmware image that is used in TP-Link RE450 (and some more devices from
the RE series) is tplink-safeloader.
In the kernel partition, the kernel is compressed in a regular tp-link
firmware that is just used for booting. Since it is only used for compressing
and booting, only four fields are filled in the header:
Vendor, version, kernel load address and kernel entry point.
mktplinkfw-kernel is a simpler version of mktpolinkfw that generate such
images. It also specifies the hardware id (as it is in the product info
section), so when doing a sysupgrade - the existing code will check for
hardware compatibility.

Signed-off-by: Tal Keren <kooolk@gmail.com>
[rd@radekdostal.com: add build target to .../image/tp-link.mk]
Signed-off-by: Radek Dostál <rd@radekdostal.com>

The TL-WR1043ND v4 uses a kernel image with a mktplinkfw header inside the
os-image partition of a tplink-safeloader image.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

In order to make it easier to add new boards in the future, refactor the code
to describe the image layouts of supported boards in a struct array and alter
the image generation routines to figure out the sysupgrade partitions
automatically.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

Restructure the code a bit to allow for omitting vendor data when generating
factory images.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

Force root/root as names for uid0/gid0 instead of using the system
names. This helps make packed download tarballs more reproducible

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

This is intended to be used for a wide array of package sanity checks.

The first check that is implemented is for the hash of downloaded files.
It checks:
  - Missing hash
  - Use of SHA256 instead of MD5
  - dl/<file> hash not matching hash in makefile
  - deprecated MD5SUM variable

The deprecated MD5SUM variable check is skipped for feeds/ until OpenWrt
is updated as well

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Replace *MD5SUM with *HASH, replace MD5 hashes with SHA256

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Based on OpenWrt PR#250

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

Adds support for new EU and US variants; removes a few strings that were
never actually used and have been removed from the stock firmwares.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Sadly, LibreSSL claims to be OpenSSL v2.0.0 while not providing the new
interfaces introduced with OpenSSL v1.1.x, so extend the pre-OpenSSL 1.1.x
compat checks to consider LibreSSL as well.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

libressl sets OPENSSL_VERSION_NUMBER to 0x20000000L, which breaks API
checks based on it.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

The OpenSSL 1.1.x version series undergone some major API changes which made
the RSA structure opaque and deprecated a number of methods, so add some
conditional compat code to make the u-boot source build again.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

Our current implementation is pretty old and uses some pre-standard/old
ANSI C style that triggers warnings like:
warning: call to function 'MD5_Init' without a real prototype [-Wunprototyped-calls]

This is caused by declarations specified in a following way:
src/md5.h:60:6: note: 'MD5_Init' was declared here
 void MD5_Init ();

Having these warnings makes it harded to notice real problems. We could
try hiding them but it makes more sense to just use a cleaner code.
Another tiny gain from this switch is slightly reduced binary size, on
x86_64 tplink-safeloader's size 48104 became 48003.

The new code is public domain, uses "heavily cut-down BSD license".

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

Earlier compilers such as GCC 4 do not like anynomous unions, make it a named
union "u", and update the code where relevant.

Fixes FS#298
Fixes: a72e1692 ("firmware-utils: Add support for the Cisco Meraki MX60/MX60W")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Release notes at
https://cmake.org/cmake/help/v3.7/release/3.7.html



Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>

User-visible changes since 0.64 are as follows:

  - Translation fixes
  - Project settings have priority
  - Reject binary files in patches
  - Fix a race condition in diff_file
  - Performance: Optimizations to the setup command
  - Performance: Optimizations to the bash completion script
  - Test suite: Improve the edit test case
  - Test suite: Make the symlink test more robust
  - Test suite: Test backup failure
  - Test suite: Test the header command with hard links
  - diff: Report diff failures
  - edit: Fix a corner case bug
  - mail: Fix the help text
  - push: Fix the synopsis
  - refresh: Do not remove symlinks
  - refresh: Break links to read-only patch files
  - refresh: Always preserve modification time
  - setup: Report failed look-ups in inspect-wrapper
  - quilt.el: Fix quilt-editable when patches are stored in subdirs
  - bash_completion: Handle spaces in file names
  - bash_completion: Update the list of commands
  - bash_completion: Add new command options
  - bash_completion: Fix handling of mail, new, push options
  - guards: Simplify the help text
  - guards: Include the file name also in the "Not found" case
  - guards: Add support for an external filelist in --check mode
  - guards: Report which config file has problem in --check mode
  - guards: Documentation update
  - guards: Clarify a user message

Note to packagers: the Makefile was modified to take configure's
--sysconfdir into account as other projects do. As a result, setting
--prefix=/usr will no longer put the configuration files under /etc.
You now need to explicitly pass --sysconfdir=/etc. If you don't,
configuration files will go under /usr/etc, which is not what you want.
This is somewhat less intuitive, but also more consistent with what
other projects are doing.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>

RELEASE 2.5.1 - Mon, 03 Nov 2016 13:37:42 -0400
    - Add scons-configure-cache.py to packaging. It was omitted
    - Use memoization to optimize PATH evaluation across
      all dependencies per node.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>

This patch adds header support for the Cisco Meraki MX60/MX60W, which
are a part of the apm821xx target. Some structure changes were needed
due to the fact this device uses U-Boot (unlike other devices in
mkmerakifw.c) which uses a different header structure to define the load
offsets for the image.

A thanks to Christian for helping implement this properly.

Cc: Christian Lamparter <chunkeey@gmail.com>

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>