This required us to both download the Foundation emulator but also build
a boot wrapper. QEMU is now fully usable and is a much better
replacement.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Add an alternative nslookup applet implementation which is compatible with
musl libc wrt. name server selection and which supports a number of additional
features such as query type selection.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

MMC requires IOMEM support, which UML doesn't have.

Fixes mac80211 build, as mwifiex-sdio depends on MMC support.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

Commit f4e312dd adds libnetlink to
staging dir but did not add the header files libgenl.h and ll_map.h
which define functions belonging to libnetlink lib

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

Similar to odhcpd, allow using ISC DHCPd instead of dnsmasq.
Disable DHCP and/or DHCP6 in case ISC DHCP is present and
enabled.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

Now that the wireless LEDs are added via platform leds this patch isn't
required any longer.

Signed-off-by: Mathias Kresin <dev@kresin.me>

Instead of renaming the default wireless led attached to the wireless
chip, add a new led using the platform leds with the phy0tpt trigger
set in userspace.

When switching ar71xx to device tree, the same can be done by using the
build in GPIO controller and without adding new bindings.

Drop the now unused platform code.

Signed-off-by: Mathias Kresin <dev@kresin.me>

Don't setup the default led pin if the ath9k GPIO controller is used
via device tree to prevent collision. In case any of the pins exposed
by the ath9k is used, the phyNtpt trigger needs to be set in userspace.

Signed-off-by: Mathias Kresin <dev@kresin.me>

In case that the atheros device tree binding is used, enable access to
the GPIO chip only if the gpio-controller device tree parameter is used
for the ath9k node.

Signed-off-by: Mathias Kresin <dev@kresin.me>

Unset the default LED gpio pin if the same gpio pin is used by a LED
defined via platform LED. This prevents that the default led trigger
gets assigned to this LED and the GPIO value gets changed on
wifi up/down in case the led is not used for signaling the wifi state.

Signed-off-by: Mathias Kresin <dev@kresin.me>

With the fritz-tools a userspace parser for the Tiny Flash File System
is available and makes the tffs2 kernel patches obsolete.

Signed-off-by: Mathias Kresin <dev@kresin.me>

Split the fritz-tools into subpackages. fritz_tffs_read is usefull for
all Fritz boards where fritz-cal_extract is only required for the
Fritz 4040 at the moment.

Rename the tffs related binary to the more catchy name fritz_tffs and
move the whole package to utilities since the package doesn't really
provide a firmware file.

Make the fritz-tools available for all targets and build them shared.
The tffs is used by avm on lantiq and ar71xx as well.

Tested-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Mathias Kresin <dev@kresin.me>

Fix the list order instead of adjusting the controller scan order.
Revert the former required changes to the lantiq PCIe driver.

Signed-off-by: Mathias Kresin <dev@kresin.me>

Extend the mdadm package to allow to explicitely configure arrays as
well as device list entries.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

Update to latest Git in order to import the following fixes:

1d0263b check_data_file_clashes_change: remove duplicated offline root in paths
a00a6a9 buildReplaces: do not add duplicated replacees
9fbedd8 opkg: compare-versions doesn't need any state
45b54f6 opkg_cmd: fix segmentation fault in opkg_compare_versions_cmd()
93de62b opkg_cmd: fix return of opkg compare-versions
51275a8 pkg_src_list_push: remove unused function
947d3d4 pkg_src_list_pop: remove unused function
980cfb2 str_list_push: remove unused function
52c31c1 str_list_prev: remove unused function
7d24212 str_list_last: remove unused function
48142a3 conffile_list_pop: remove unused function
46c5de5 pkg_dest_list_push: remove unused functions
368bb62 nv_pair_list_prev: remove unused function
2985c00 nv_pair_list_last: remove unused function
f5082ac conffile_list_pop: remove unused function
89bf8b9 conffile_list_push: remove unused function
23d31fb active_list_sort: remove unused function
7fe45f2 active_list_add_depend: remove unused function
86b584d pkg_dependence_satisfied: remove unused function
816d330 Fix typo in pkg_hash_fetch_best_installation_candidate.
07f3b02 set_flags_from_control: remove function

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

* adds MT7530 DSA support
* backport latest ethernet driver
* add PMIC leds
* add auxadc support
* add efuse support
* add thermal sensor support
* add irq affinity support for ethernet

still todo
* DSA multi cpu support

Signed-off-by: John Crispin <john@phrozen.org>

Support for the nct6775/6776 hwmon chips, and other compatibles
in the family as well as the Intel on-chip thermal sensors.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

The HOSTCFLAGS override only works on newer u-boot versions

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Fixes errors during the image builder run

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Fixes: 0b24850e ("busybox: don't install NTP scripts if NTP isn't configured")
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Keeping it in base-files was resulting in adding it to the base-files
package. This file is meant to be included manually for initramfs
images only.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

Cuts build time on Mac OS X in half by avoiding repeated $(shell) calls
from the build system

Signed-off-by: Felix Fietkau <nbd@nbd.name>

If someone creates a target and indicates a CPU_TYPE, but there's
no corresponding support for that CPU_TYPE's flags in include/target.mk
then that should probably be indicated rather than silently ignored.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

update the qca988x firmware to firmware-5.bin_10.2.4-1.0-00029.
According to LEDE Forum, the new firmware supports mesh mode.
Also, it seems to have several improvements.

Signed-off-by: Changmin Jang <ckdalsdk12@gmail.com>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

asm/* includes are not safe for the host build

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Fixes issues with 802.11s

Signed-off-by: Felix Fietkau <nbd@nbd.name>

There are currently several supported TP-Link devices without specified
version number in image name and/or DEVICE_TITLE (e.g. WBS210, WBS510,
TL-WR810N, TL-WA7510N, TL-WPA8630), but vendor website shows that there
are already more than one version of them on the market.

For devices like Archer C5, which second version is based on a total
different platform, missing version number in DEVICE_TITLE (used in
menuconfig) might be misleading for users.

To make it less confusing for users and easier to maintain in future,
include version number in image name and DEVICE_TITLE for all TP-Link
devices, even if there is only one version of device at the moment.

Also, keep DEVICE_TITLE in same format for all TP-Link devices.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Acked-by: John Crispin <john@phrozen.org>

Kernel/hardware support for this board has been implemented since
Chaos Calmer. This set of patches is to get the board identified in
userland. This will allow support for things like sysupgrade,
configuring initial LED state, configuring initial switch state, etc.

Signed-off-by: Ron Angeles <ronangeles@gmail.com>

This router has the same hardware as TP-LINK TL-WR841N/ND v11 (same FCC
ID, same TFTP image name...).

If the stock firmware web interface doesn't accept LEDE factory image,
it can be flashed via the U-Boot TFTP recovery mode, by long-pressing
the reset button after power on.

The TFTP image name is wr841nv11_tp_recovery.bin (yes, v11, not v12).

Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>

Fix fw3 warnings in dhcp script in case fw3 is not enabled

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

Normal packages don't rely on the feed configuration variables for the
build step

Signed-off-by: Felix Fietkau <nbd@nbd.name>

On the more sophisticated (i.e. deeper FIFO) serial controllers,
flow-control might be needed to avoid dropping output.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

Couple of important upstream patches (slated for 2.0.15) that
are necessary for kexec to run on MUSL and on x86 hardware.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

If you're using Chrony or NTPD you don't want the busybox NTP server
as well.  Make it's installation truly conditional.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [simplify]

Intel(R) 82576 is an adapter which supports SR-IOV. Thus the host can
assign Virtual Functions (VFs) to different VMs by the PCI-E Passthrough
(e.g. VFIO for KVM), to gain different advantages (performance, VF to VF
communications, host kernel offload, etc.).

The driver of the passthroughed VFs is the igbvf (igb is NOT
compatible).

This is essential for VM guests, to enable them to utilize this feature.

Signed-off-by: Ye Tao <tydus@hongo.wide.ad.jp>

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

The patch is missing a trailing new line

Signed-off-by: John Crispin <john@phrozen.org>

3d9f406 rework IPv6 dns address selection (FS#635)
bc6c3ac ndp: keep an exact copy of IPv6 interface addresses
6eb1e01 ndp: code cleanup
eea7d03 rework IPv6 address dump logic
24d21c7 ndp: add syslog debug tracing

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>