Skip to content
Snippets Groups Projects
Select Git revision
  • master default protected
  • v17.01.1
  • v17.01.0
  • v17.01.0-rc2
  • v17.01.0-rc1
  • reboot
6 results
Search by author
  • Any Author
  • Johannes Rudolph Johannes Rudolph PowerPan
1 author
  1. Jan 26, 2017
  3. Jan 25, 2017
  5. Jan 24, 2017
    • Rafał Miłecki's avatar
      brcm47xx: backport arch patch with Luxul devices support · 1a83d4d3
      Rafał Miłecki authored 
      
Signed-off-by: default avatarRafał Miłecki <rafal@milecki.pl>
      1a83d4d3
    • Florian Fainelli's avatar
      package-ipkg: Do not fail build without base-files · 25e2cf39
      Florian Fainelli authored 
      
If the base-files package is not selected, we will fail executing the
very first postinst script:

make[3]: Leaving directory `/local/users/fainelli/openwrt/trunk'
cp -fpR
/local/users/fainelli/openwrt/trunk/build_dir/target-arm_xscale_musl-1.1.15_eabi/root-orion
/local/users/fainelli/openwrt/trunk/build_dir/target-arm_xscale_musl-1.1.15_eabi/root.orig-orion
./usr/lib/opkg/info/busybox.postinst: line 3:
/local/users/fainelli/openwrt/trunk/build_dir/target-arm_xscale_musl-1.1.15_eabi/root-orion/lib/functions.sh:
No such file or directory
./usr/lib/opkg/info/busybox.postinst: line 4: default_postinst: command
not found
postinst script ./usr/lib/opkg/info/busybox.postinst has failed with
exit code 127
make[2]: *** [package/install] Error 1

Check for the existence of lib/functions.sh, and if it does not exist,
just bail out gracefully.

Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      25e2cf39
    • Matthias Schiffer's avatar
      base-files: fix user creation on sysupgrade with few opkg control files · 86ccaf4c
      Matthias Schiffer authored 
      
If only a single opkg control file exists (which can happen with
CONFIG_CLEAN_IPKG), grep would not print the file name by default. Instead
of forcing it using -H, we just switch to -l (print only file names) and
get rid of the cut.

Add -s to suppress an error message when no control files exist.

Signed-off-by: default avatarMatthias Schiffer <mschiffer@universe-factory.net>
      86ccaf4c
    • Matthias Schiffer's avatar
      include/rootfs.mk: keep Require-User lines with CONFIG_CLEAN_IPKG · 7e1fc09c
      Matthias Schiffer authored 
      
Require-User is handled by /etc/uci-defaults/13_fix_group_user on first
boot, so we need to keep these when removing all opkg data with
CONFIG_CLEAN_IPKG.

Signed-off-by: default avatarMatthias Schiffer <mschiffer@universe-factory.net>
      7e1fc09c
    • Rafał Miłecki's avatar
      mac80211: brcmfmac: don't use uninitialize mem for country codes · 4376e694
      Rafał Miłecki authored 
      
There was a bug in brcmfmac patch that could result in treating random
memory as source of country codes.

Signed-off-by: default avatarRafał Miłecki <rafal@milecki.pl>
      4376e694
    • Felix Fietkau's avatar
      Add back the commit "ath9k: Add airtime fairness scheduler" · 6b013019
      Felix Fietkau authored 
      
This reverts commit c296ba83.
According to several reports, the issues with the airtime fairness
changes are gone in current versions.
It's time to re-apply the patch now.

Signed-off-by: default avatarFelix Fietkau <nbd@nbd.name>
      6b013019
    • Alberto Bursi's avatar
      kirkwood: add ZyXEL NSA310b · 94676dd9
      Alberto Bursi authored 
      The ZyXEL NSA310 device is a Kirkwood based NAS:

- SoC: Marvell 88F6702 1200Mhz
- SDRAM memory: 256MB DDR2 400Mhz
- Gigabit ethernet: Realtek (over pcie)
- Flash memory: 128MB
- 1 Power button
- 1 Power LED (blue)
- 5 Status LED (green/red)
- 1 Copy/Sync button
- 1 Reset button
- 2 SATA II port (1 internal and 1 external)
- 2 USB 2.0 ports (1 front and 1 back)
- Smart fan

The stock u-boot cannot read ubi so it should be replaced with the
LEDE/OpenWRT's u-boot or with a u-boot from here
https://github.com/mibodhi/u-boot-kirkwood



This device's boot ROM supports "kwboot" tool
(in mainline u-boot, built automatically if CONFIG_KIRKWOOD is declared)
that sends an uboot image to the board over serial connection, it is very easy to unbrick.

The stock bootloader can use usb and read from FAT filesystems,
so the installation process is simple, place the uboot file on a USB flashdrive
formatted as FAT (here it is "openwrt-kirkwood-nsa310.bin", then connect TTL
to the board and write the following commands in the bootloader console:

usb reset
fatload usb 0 0x1000000 openwrt-kirkwood-nsa310.bin
nand write 0x1000000 0x00000 0x100000
reset

Now you are rebooting in the new u-boot, write this in its console to install the firmware:

usb reset
fatload usb 0 0x2000000 lede-kirkwood-nsa310b-squashfs-factory.bin
nand erase.part ubi
nand write 0x2000000 ubi 0x600000

If your firmware file is bigger than 6 MiBs you should write its size in hex
instead of 0x600000 above, or remove that number entirely (it will take a while in this case).

If you are using another uboot that can read ubi, set mtdparts like this

mtdparts=mtdparts=orion_nand:0x00c0000(uboot),0x80000(uboot_env),0x7ec0000(ubi)

And set your bootcmd to be like this

bootcmd=run setenv bootargs; ubi part ubi; ubi read 0x800000 kernel; bootm 0x800000

Then you can install the firmware as described above.

After you installed (or configured) the u-boot for booting the firmware,
write the device's mac address in the ethaddr u-boot env.
The MAC address is usually on a sticker under the device (one of the two codes is the serial),
it should begin with "107BEF" as it is assigned to ZyXEL.

write in the u-boot console (use your MAC address instead of the example)

setenv ethaddr 10:7B:EF:00:00:00
saveenv

to save the mac address in the u-boot.

Signed-off-by: default avatarAlberto Bursi <alberto.bursi@outlook.it>
      94676dd9
    • Alberto Bursi's avatar
      uboot-envtools: add nsa310b envs · 55ecceb8
      Alberto Bursi authored 
      
accessing the u-boot's envs on this device is required to read the mac address.
These are the envs of the new u-boot, not of the stock one.

Signed-off-by: default avatarAlberto Bursi <alberto.bursi@outlook.it>
      55ecceb8
    • Hans Geiblinger's avatar
      mvebu: set fan_ctrl.sh only on mamba · a43c503e
      Hans Geiblinger authored 
      Signed-off-by: Hans Geiblinger <cybrnook2002yahoo.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [cleanup]
      a43c503e