This causes problem when a FQDN is configured in /etc/config/system. The
domain name will appear twice in reverse DNS.

Next to that, there seems to be a bug in dnsmasq. From the manual page:

--interface-name=<name>,<interface>[/4|/6]
Return  a  DNS  record  associating  the  name  with  the primary address
on the given interface. This flag specifies an A or AAAA record for the
given name in the same way as an /etc/hosts line, except that the address
is not constant, but taken from the given interface. The interface may be
followed by "/4" or "/6" to specify  that  only  IPv4  or  IPv6 addresses
of the interface should be used. If the interface is down, not configured
or non-existent, an empty record is returned. The matching PTR record is
also created, mapping the interface address to the name. More than one name
may be associated with an interface address by repeating the flag; in that
case the first instance is used for  the  reverse address-to-name mapping.

It does not just create an A/AAAA record for the primary address, it creates
one for all addresses. And what is worse, it seems to actually resolve to the
non-primary address first. This is quite annoying when you use floating IP
addresses (e.g. VRRP), because when the floating IP is on the other device,
SSH failes due to incorrect entry in the known hosts file.

I know that this is not a common setup, but it would be nice if there was an
option to restore the previous behaviour, rather than just forcing this new
feature on everybody.

Reported-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

Delete the map-t device when tearing down the map-t interface; as such
there's no conflict when the map-t interface comes up again when trying
to add the map-t device as the map-t device was still present
(Can not add: device 'map-wan6_4' already exists!).

Only call ifdown in teardown for map-e and lw6o4 map interfaces types
in order to suppress the trace "wan6_4 (6652): Interface wan6_4_ not found"

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

This reverts the following commits:
fbe522d1
278ad007
863888e4
96daf635
cfd83555

This seems to trigger some mconf bugs when built with all feeds
packages, so I will try to find a less intrusive solution before the
release.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Conditional dependencies use the '(!cond) || dep' syntax, whereas
conditional select uses 'dep if cond'.
Add an extra check to suppress emitting a conditional if an equal
conditional select already exists.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

One replaces our local patch and another is just for keeping driver in
sync (license change).

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

The hardware queue scheduling is apparently configured with fixed
priorities, which creates a nasty fairness issue where traffic from one
CPU can starve traffic from all other CPUs.

Work around this issue by forcing all tx packets to go through one CPU,
until this issue is fixed properly.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Fixes issues where the second-stage u-boot already uses UBI.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Useful for providing images that work for multiple devices

Signed-off-by: Felix Fietkau <nbd@nbd.name>

They seem to fail in tests using UBI, and are not used by yaffs2

Signed-off-by: Felix Fietkau <nbd@nbd.name>

The only target still referencing it is omap24xx, and it is marked as
broken.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Commit af79fdbe changed the code to use tx_nbits for dual SPI tx
transfers, however the SPI stack only allows this when the device mode
includes the relevant bit as well

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Accept SPI_TX_DUAL in device mode to fix the CPLD driver

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Improves automatic channel section support.

Tested on AC (mamba) and ACM (rango).

Signed-off-by: Kabuli Chana <newtownBuild@gmail.com>
[Jo-Philipp Wich: reword commit message]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

V2 using helper function was sent for upstream kernel

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

wpa_supplicant allows only SAE as the key management
type for mesh mode. The recent key_mgmt rework unconditionally
added WPA-PSK - this breaks interface bringup and wpa_s
throws this error message:

Line 10: key_mgmt for mesh network should be open or SAE
Line 10: failed to parse network block.
Failed to read or parse configuration '/var/run/wpa_supplicant-wlan0.conf

Fix this by making sure that only SAE is used for mesh.

Signed-off-by: Sujith Manoharan <m.sujith@gmail.com>

The gettext-full host build might pick up iconv-stub host build  headers
during the build, leading to stray linker errors with unresolved references
to libiconv_open(), libiconv() and libiconv_close().

Since we're not needing iconv support on the host, pass the appropriate
cache variables to configure to prevent detection and linking of iconv.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

Patch cmakes cmcurl component to unconditionally link librt when we discover
a clock_gettime() symbol in -lrt.

This is required to sucessfully link LibreSSL's libcrypto which might or
might not reqauire librt.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

Since linker argument order is significant on modern host compilers, pass
the required libcrypto libraries through the HOST_LOADLIBES variable in
order to ensure proper order of the final linker command line.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

Fixes link errors for host packages like ruby like the following:

/usr/bin/ld: .../staging_dir/host/lib/libcrypto.a(libcrypto_la-md5_dgst.o):
relocation R_X86_64_PC32 against symbol `memcpy@@GLIBC_2.14' can not be used when making a shared object; recompile with -fPIC

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

Cleanup to prepare for changing STAGING_DIR_HOSTPKG. The actual change of
STAGING_DIR_HOSTPKG (i.e., moving the host packages back into a common, not
target-specific directory) will be done after the first LEDE release, but
the cleanup will also be useful for projects like Gluon.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

They prepare brcmfmac for using wiphy_read_of_freq_limits.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

Just 6 patches were using 80*, 81*, 82* and 84* prefixes.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

The removal of the ".+Package" pattern in scan.mk also caused the build
system to skip over Makefiles defining only kmods. Adjust the grep pattern
to consider packages with "call KernelPackage" signatures as well.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

Signed-off-by: John Crispin <john@phrozen.org>

This code was marked as incompatible to Linux 4.4 well over a year ago
and nobody cared, and now it's breaking builds.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>