A lot of packages (especially those using libtool) depend on sed being
available. xz fails on an incremental build pretty early if it's not
there.

Clean up handling if essential core tools (patch, tar, xz), build them
in parallel and make them depend on sed

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

--force-compr was added by the xz compression patch, which is gone now.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

--force-compr was added by the xz compression patch, which is gone now.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

The old polarssl 1.3 branch is EOL since end of 2016, and the package
for it will be removed soon.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

The old polarssl 1.3 branch is EOL since end of 2016, and the package
for it will be removed soon.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

It has been unused, and less useful than squashfs for cases where flash
space usage matters.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Add option keep_ra_dnslifetime which will preserve the received
lifetime for RDNSS and DNSSL RA records and not overwrite it
by the RA router lifetime as specified in RFC6106.
This allows to accept RDNNS records from RAs that don't announce
a default route by setting router lifetime to 0 in the RAs.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

It is safe and required by some software, e.g. shadowsocks

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Ensure that BIN_DIR exists when the diffconfig target needs it.
Otherwise 'make diffconfig' fails after 'make clean'

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>

Fixes build error

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

ef3c563 dhcpv6-ia: filter out prefixes having invalid length
16cd87e dhcpv6-ia: fix dereference after freeing assignment
d6b0c99 dhcpv6-ia: log only IPv6 addresses which are effectively
assigned to a DHCPv6 client
08a9367 config: respect ignore uci option

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

Support for such old gcc version is not needed.

This reverts commit 2694d43b.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

* Fix bug in deflate_stored() for zero-length input
* Fix bug in gzwrite.c that produced corrupt gzip files

Signed-off-by: Magnus Kroken <mkroken@gmail.com>

It is no longer used for upgrading

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Disable block2mtd support

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

Now that we generate images with metadata attached, require it in order
to prevent accidentally flashing the wrong image to a board.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

They were added for debugging and I forgot to remove them.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

I missed 3 boards in this commit:
commit d8dde8c5
Author: Hauke Mehrtens <hauke@hauke-m.de>
Date:   Wed Jan 4 21:53:22 2017 +0100

    lantiq: fix console print

Add bootargs parameters for ARV4525PW, ARV7506PW11 and ARV8539PW22
again.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Refresh patches on all 4.4 supported platforms.
Compile & run tested: lantiq/xrx200

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

This property allows specifying extra limits for wireless device in DT.
For a full documentation see upstream commit b330b25eaabd ("dt-bindings:
document common IEEE 802.11 frequency limit property").

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

Add support for the integrated AC97 sound device on motherboards
with AMD CS5535/CS5536 chipsets.
Tested on Wyse Winterm S30.

Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

It is used on NAND devices in case hotplug is too slow

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Vladimir Zahradnik <vladimir.zahradnik@gmail.com>

The boot loader of many boards provides a kernel boot argument with a
broken console parameter to the kernel. This will be taken before the
stdout-path defined in device tree and the serial will not work on this
board. Multiple boards are affected by this problem, so revert this
patch for all boards. Later we can remove the boot arguments from the
device tree again, after the individual board was checked to work.

This partly reverts this commit:
commit 4995c648
Author: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Date:   Sun Dec 11 21:55:00 2016 +0100

    lantiq: specify console using stdout-path instead of cmdline argument

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

'add_local_hostname' previous implementation may drop some addresses.
Soft addition of IP6 addresses may not cause a reload or restart event.
dnsmasq '--interface-name' robustly applies DNS to all addresses per
interface (except fe80::/10).

Change UCI 'add_local_hostname' to expand during each interface assignement
during add_dhcp().
Assign '<iface>.<host>.<domain>' as true name (reflexive A, AAAA, and PTR).
Assign '<host>.<domain>' and '<host>' as convinience aliases (no PTR, not
technically CNAME).
This is accomplished with the '--interface-name' order, first is PTR.
We could also assign each <ip4/6>.<iface>.<host>.<domain> to the respective
dual stack on the interface.
That seemed excessive so it was skipped (/4 or /6 suffix to the interface).
Add UCI 'add_wan_hostname' similar to 'add_local_hostname' function for
external WAN.

WAN IP4 are less often named by the ISP and rarely WAN IP6 due to complexity.
For logs, LuCI connection graph, and other uses assigning a WAN name is desired.
'add_local_hostname' only applies with DHCP and 'add_wam_hostname' only applies
without DHCP. Common residential users will want to set both options TRUE.
Businesses will probably have global DNS, static IP, and 'add_wan_hostname' FALSE.

Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>

Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>

The devices are mostly identical to the CPE210/510, but use external
antennas.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

Funnel the required LDFLAGS environment through HOST_CONFIGURE_CMD for now
as the HOST_CONFIGURE_VARS semantics are completely broken.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

This reverts commit 8395b63aac616f72fd835c59240fc2a4a6b28106.

Various host builds currently rely on the broken behaviour of
HOST_CONFIGURE_VARS so roll back to the previous state.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

LibreSSL's libcrypto.so has an indirect dependency to librt for clock_gettime()
on Linux.

Use pkg-config to portably discover the required linker flags.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>