Signed-off-by: Felix Fietkau <nbd@nbd.name>

-mXXX option is deprecated already in arc-2016.03 toolchain
and removed completely starting from arc-2016.09.

Direct replacement is -mcpu=XXX which is already supported by
arc-2016.03 used today in Lede.

With that change we'll be ready for ARC toolchain update still
keeping everything working with current tools.

Signed-off-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Cc: John Crispin <john@phrozen.org>

Signed-off-by: John Crispin <john@phrozen.org>

the function prototype has changed, make the new stub consistent with this
change.

Signed-off-by: John Crispin <john@phrozen.org>

The only HMACs currently available use MD5 and SHA1, both of which have known
weaknesses. We already compile in the SHA256 code since we use Curve25519
by default, so there's no significant size penalty to enabling this.

Signed-off-by: Joseph C. Sible <josephcsible@users.noreply.github.com>

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>

Adds preliminary kernel 4.9 support for this target.

- Refreshed/Updated all patches

Added 3 new patches:
- 093 --> Add virtual PCI MMIO mapping
- 230 --> Remove deprecated code
- 240 --> Rework AT24 eeprom code to use the new NVMEM API

Compiled & tested on cns3xxx (gw2388)

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

fixes build error due to missing kernel config options

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Use 0xx prefix for accepted patches.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

Add support for the Observa Telecom VH4032N router.

This is another BCM6368 router, 128 MB RAM, 32MB flash and 3 USB
host ports.

The wifi chip is an onboard Broadcom BCM43222.

Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
[jonas.gorski: use gpio-hog instead of abusing ephy-reset]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

8df4253 ndp: harden netlink event socket error handling
b02f3e6 ndp: close proc file descriptor also during error handling
8a615ad npd: rework IPv6 relay logic (FS#396)
0129f79 config: restore interface defaults when cleaning interface

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

Allows parallelizing compile steps that might be necessary during install

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Passing -iremap argument separately causes problems with projects that
use scons and its ParseFlags function. Consider this SConscript
example:

    env = Environment()
    d = env.ParseFlags("-iremap one:two")

ParseFlags will interpret one:two as a file name and the returned dict
d will contain only "-iremap". When the -iremap is passed to the
compiler without an argument, compilation obviously fails.

Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>

Remove CONFIG_VLAN_8021Q overrides for two targets
These features are built into the kernel image for all targets

Signed-off-by: Felix Fietkau <nbd@nbd.name>

If the staging dir was deleted, the build needs to recompile some files.
This change speeds up this corner case significantly

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Etienne Haarsma <bladeoner112@gmail.com>

Probe the switch through DT instead of a platform device. This fixes
probe, as GPIO offsets are now properly accounted for.

Fixes the following issue:

[    0.802953] 8021q: 802.1Q VLAN Support v1.8
[    0.810518] rtl8366_smi: gpio_request failed for 18, err=-517

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

BCM6362 and BCM3380 seem to share the same PRID. Disable serial output
for them until we can find a way to tell them apart reliably.

Fixes: 8f3cfe4b ("brcm63xx: lzma-loader: add BCM3380 support")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

This patch adds support for the ADB P.DG AV4202N aka Pirelli PRG AV4202N.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

Setup the GPIO_MODE register bits for used internal switch port leds.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

Make sure we do a proper reset of the phy, if the phy reset is defined.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

Add support for mapping some GPIO lines to IRQs. GPIO to IRQ mappings
were found out through experimentation, helped by having the GPIO as
output still toggling the IRQ input.

Based-on: http://patchwork.ozlabs.org/patch/660534/


Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

Setting the clear bit for an interrupt seems to cause interrupts to be
deasserted again immediately. So unset the bit for BCM6318 to allow
subsequent interrupts to still work.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Ensure that the <package>.provides files are always created

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Fixes buildbot errors on running make target/install or
toolchain/install

Signed-off-by: Felix Fietkau <nbd@nbd.name>

When calling erase() on a containers derived from __base_associative
(e.g. multimap) and providing a pair of iterators a segfault will
occur.

Example code to reproduce:

	typedef std::multimap<int, int> testmap;
	testmap t;
	t.insert(std::pair<int, int>(1, 1));
	t.insert(std::pair<int, int>(2, 1));
	t.insert(std::pair<int, int>(3, 1));
	t.erase(t.begin(), t.end());

Signed-off-by: Ben Kelly <ben@benjii.net>

Goflexhome/net use uImage, and to boot an uImage the u-boot
must use bootm command, not bootz.

Fixes the "i cannot boot LEDE with this u-boot" issue that I
found out myself with my goflexnet.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>

all patches for CONFIG_SYS_GENERIC_BOARD are obsolete for
uboot 2016 sources.

Run-tested with the uboot of goflexnet, also the md5sum of
all other uboots is the same with or without these patches.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>

Update to 3.1.6

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>

* Update to 1.43.4
* Use xz tarball which saves about 2Mbyte in size

Changelog: http://e2fsprogs.sourceforge.net/e2fsprogs-release.html#1.43.4



Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [use @KERNEL instead of hardcoded URL]

Signed-off-by: Felix Fietkau <nbd@nbd.name>

* Update to 1.43.4
* Refresh patches
* xz tarball which saves about 2M in size

Changelog: http://e2fsprogs.sourceforge.net/e2fsprogs-release.html#1.43.4



Tested by Etienne Haarsma (ar71xx), Daniel Engberg (kirkwood)

Signed-off-by: Etienne Haarsma <bladeoner112@gmail.com>
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [use @KERNEL instead of harcoded URL]

Default CONSOLE value for ar71xx target is "ttyS0,115200", so there
is no need to specify the same value in device profiles.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

This commit reverts 42f3c1fe ("arc770: fix broken upstream change")
and simultaneously adds back-ported fix from Linus' tree:
a524c218bc94 ("ARC: [arcompact] brown paper bag bug in unaligned
access delay slot fixup").

Note mentioned patch will appear in stable trees soon as well so
IMHO there's not much sense in adding this separate patch in lede/master branch.
As well as we will get rid of it here in 17.01 once we bump 4.4 kernel here
later down the line.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Felix Fietkau <nbd@nbd.name>
Cc: John Crispin <john@phrozen.org>
Cc: Jo-Philipp Wich <jo@mein.io>

cdc3dab ujail: fix signal forwarding

Signed-off-by: John Crispin <john@phrozen.org>

mtdsplit_lzma requires that the rootfs be aligned to a block boundary.
Pad the kernel partition to make this so.

Signed-off-by: Claudio Leite <leitec@gmail.com>