Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

- use default host install and clean.
- backport compatibility patch for OS X and LEDE (avoids having to force iconv
for OS X).
- use default HOST_BUILD_DIR.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Fixes a regression in commit 8f24ee63:
"uqmi: Add proper IPv6 support"

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Commit 8f24ee63 ("uqmi: Add proper IPv6 support") changed the code
to fetch the IPv4 address via QMI by default instead of using DHCP to
make it consistent with the IPv6 codepath.
This breaks on at least some Sierra Wireless cards, where data exchanges
fail to work until the host has fetched a DHCP lease.
Leave v6 as it is, but always use DHCP for v4.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Florian Beier <beier.florian@gmail.com>
[Matthias Schiffer: fix factory image, improve commit message]
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

The D-Link DIR-869 A1 doesn't accept images with the jffs2 marker added
after the checksummed range, so we need to include it in the checksum and
fix it on first boot.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

Use relocation loader instead of lzma loader.

Tested on D-Link DIR-869 A1.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

Split seama-factory and seama-sysupgrade into smaller pieces (similar to
the ramips code) to make the image generation more flexible.

Also use standard pad-offset instead of adding a block of zeros at the
beginning of the image that is later cut off again. Standard pad-rootfs can
be used as the seal header doesn't contain an image size or checksum.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

Adjust the check for gcp (GNU copy command) to rule out false positives
with "Goffi's CoPier" a python copy command.

Fixes FS#218.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

In case the adsl/vdsl service is disabled intentional, the output is
cluttered with the following message multiple times if the status of
the dsl line is queried:

  killall: vdsl_cpe_control: no process killed

If the dsl line status is queried by LuCI, the logfile is spammed with
the message.

Fix the issue by using killall in quite mode. In quite mode killall
still returns a non-zero value if the to be killed process can not be
found so that existing logic based on the return value still works.

Signed-off-by: Mathias Kresin <dev@kresin.me>

nf_tproxy_core was removed during 3.12 development with kernel commit
fd158d79d33d3c8b693e3e2d8c0e3068d529c2dc. The code was moved
to xt_TPROXY.c.

Fixes FS#212

Signed-off-by: Mathias Kresin <dev@kresin.me>

TP-Link uses a different region coding mechanism for IL firmware for the Archer
C7 v2. Instead of of setting the region, they set a different TPLINK_HWREV.

Signed-off-by: Amir Rachum <amir@rachum.com>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Adds the latest patches from Jes Sorensen for rtl8xxxu, which improve
rtl8732bu, rtl8192eu and rtl8188eu support.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Refresh patches for all targets that support kernel 4.4.
compile/run-tested on brcm2708/bcm2710 only.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Due to the introduced double whitespace the default package selection
isn't applied. This leads to errors like a not working networking
because of a missing swconfig binary.

Fixes FS#208.

Signed-off-by: Mathias Kresin <dev@kresin.me>

diffconfig show packages selected as dependencies of
TARGET_PER_DEVICE_ROOTFS as individual selected.

Signed-off-by: Mathias Kresin <dev@kresin.me>

Since XZ is needed to bootstrap building ccache we must not depend on it,
so remove the dependency on ccache to avoid circular dependencies.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

Since XZ is required to bootstrap ccache we must not use the ccache compiler
wrapper to avoid circular dependencies.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

Make all tools except tar (which is required to bootstrap xz-utils) and XZ
itself depend on XZ, in order to be able to handle .tar.xz downloads.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

The "tar" utility is required to bootstrap XZ which is required to handle
.tar.xz archives, therfore revert to using the bz2 archive.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

In order to build XZ itself we cannot assume that XZ support is available,
so fetch the bz2 archive variant of its sources instead.

Also drop the FreeBSD portability patch and apply it at prepare time using
sed, to avoid a dependency on GNU patch which in turn depends on XZ support.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

* Change git packages to xz
* Update mirror checksums in packages where they are used
* Change a few source tarballs to xz if available upstream
* Remove unused lines in packages we're touching, requested by jow- and blogic
* We're relying more on xz-utils so add official mirror as primary source, master site as secondary.
* Add SHA256 checksums to multiple git tarball packages

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>

Quote resolveip hostname argument to avoid bad shell injections.
While at it fix pattern match logic in case multiple IPv6 addresses
are returned for a hostname as they're seperated by newline by
resolveip and not a white space

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

We build XZ as part of tools/, so no need to require it to be available
on the host system.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

Removes the bootloader from the images section as its now in packages/boot
with the others.

Signed-off-by: Ben Whitten <ben.whitten@gmail.com>

Adds u-boot for the at91 platform and a couple of boards.
The build honours COPTS to benefit from fortify source et al.

Signed-off-by: Ben Whitten <ben.whitten@gmail.com>

Now that the uhttpd init script can generate certificates using openssl as
well, update the section name and related comment to be more generic.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>

Package/*/install was using a different PATH than all other steps like
Build/Install, which was confusing and easily led to mistakes.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

Having a different PATH in Host/Install than in other steps like Host/Build
is confusing and easily leads to mistakes. Setting all of Host/Exports
makes host builds match target builds (Build/Install is part of
$(STAMP_BUILT), which has Build/Exports set).

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

It seems the intention was to add both $(STAGING_DIR_HOST)/... and
$(STAGING_DIR)/host/... instead of passing $(STAGING_DIR_HOST) twice. This
makes the definition match HOST_CPPFLAGS and HOST_LDFLAGS.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

Using HOST_BUILD_PREFIX instead of STAGING_DIR_HOST will make the argument
work as expected from packages.

Nothing changes for tools, for which HOST_BUILD_PREFIX and STAGING_DIR_HOST
are equivalent.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

Avoids build failures when the nl80211 driver is disabled

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Revert the rename of unrelated device tree nodes. Rename the missed
leds of the Speedport W 504V Typ A.

Signed-off-by: Mathias Kresin <dev@kresin.me>