Introduce a new location STAGING_DIR_IMAGE which is intended to be used by
bootloader iamges and similar image-related artifacts.

This directory is guaranteed to be persistent across kernel upgrades which
might involve a removal of KERNEL_BUILD_DIR and is guranteed to be bundled
with the image builder.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

This symbol is required when symbol SOC_IMX6 is also specified

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>

This key got moved to generic in commit:
7480d330

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

This adds support for the PCB LEDs and Reset Button found on the PC
Engines APU2/APU3 embedded boards.

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

This is only required for non-DT platforms

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Updates to openvpn.init were included in early OpenVPN 2.4 patch
series, but got lost along the way and were never merged.

Signed-off-by: Magnus Kroken <mkroken@gmail.com>

Bump kernel to 4.4.44. Compile-tested on ar71xx, ramips/mt7621 and x86/64.

.44 has been run-tested on the 17.01 branch here on ar71xx and mt7621.

Signed-off-by: Stijn Segers <francesco.borromini@inventati.org>

It got disabled in commit 4454a3fb
but works nicely these days.

Tested on cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>

HTB and TBF are the basic traffic shapers used by sqm-scripts. Moving
these into kmod-sched-core enables sqm-scripts to downgrade its
dependency from kmod-sched to kmod-sched-core, potentially making it
useful on devices with smaller flash sizes.

This adds around 30k to the size of kmod-sched-core (20k for sch_htb.ko
and 10k for sch_tbf.ko).

Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>

This adds support for the SuperIO chip nct5104d found on the PC Engines
APU boards, which allows for a handful of additional ports, such as 2x
additional UART pinouts, enabling an external watchdog (no driver for
this functionality yet), and 16 GPIO pins. More info can be found at
https://pcengines.ch/ht_gpio.htm



Thanks to @feckert for helping package this.

Cc: Florian Eckert <Eckert.Florian@googlemail.com>

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>

The following changes enables GPIO sysfs as well as the LEDS_GPIO option
within the kernel. This is required to enable LEDs over a GPIO
interface.

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>

1. Reuse functions defined in `image-commands.mk`
2. Rename fakeroot image

Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>

Move it append-file to image-commands.mk so that it can used by other
targets as well.

Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>

Enable the green feature for the board by default.

Signed-off-by: Tobias Wolf <github-NTEO@vplace.de>

The GPL licensed source code of Belkin contains an ASIC based "Green
Feature". This change adds support for this Green Feature that can be
activated with an DTS option or swconfig.

Signed-off-by: Tobias Wolf <github-NTEO@vplace.de>

Before this change only port 4 of F5D8235 V1 worked at 1000Mpbs.

Comparing the current driver with the GPL_BELKIN_F5D8235-4_v1000
v1.01.24 sources showed that additional steps are required to set-up
the rlt8366s switch correctly.

Signed-off-by: Tobias Wolf <github-NTEO@vplace.de>

This change provides the possibility to define per-device initvals in
the DTS file for a rlt8366s switch.

Signed-off-by: Tobias Wolf <github-NTEO@vplace.de>

All LEDs on this board are green.

Fixes: FS#409

Signed-off-by: Mathias Kresin <dev@kresin.me>

c4f9ace odhcpd: decrease default log level to LOG_INFO
a6eadd7 odhcpd: rework IPv6 interface address dump
44965f1 odhcpd: extra syslog tracing

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

650758b interface-ip: route proto config support (FS#170)

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

The name will appear in shell prompt and LuCI page title.  Uppercase
letters seem to be more vigorous

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

It seems module aliases are actually essential info.  E.g. other modules
may call xt_request_find_match(NFPROTO_IPV{4,6}, "hashlimit", 1) and the
kernel will request user mode modprobe helper for ipt_hashlimit and
ip6t_hashlimit respectively which are aliases of xt_hashlimit.ko

Compile-tested for armvirt, there is nearly no size impact.

Before

    -rw-r--r-- 1 yousong yousong     304 Jan 10 17:37 config.seed
    -rw-r--r-- 1 yousong yousong    1634 Jan 11 11:07 lede-armvirt-default.manifest
    -rw-r--r-- 1 yousong yousong 1533647 Jan 11 11:07 lede-armvirt-default-rootfs.tar.gz
    -rw-r--r-- 1 yousong yousong 1802711 Jan 11 11:07 lede-armvirt-root.ext4.gz
    -rw-r--r-- 1 yousong yousong 1544597 Jan 11 11:07 lede-armvirt-rootfs.cpio.gz
    -rw-r--r-- 1 yousong yousong 1174984 Jan 11 11:07 lede-armvirt-root.squashfs.gz
    -rwxr-xr-x 1 yousong yousong 1654712 Jan 11 11:07 lede-armvirt-zImage
    -rwxr-xr-x 1 yousong yousong 2738296 Jan 11 11:07 lede-armvirt-zImage-initramfs
    drwxr-xr-x 2 yousong yousong    4096 Jan 10 17:35 packages
    -rw-r--r-- 1 yousong yousong     739 Jan 10 17:37 sha256sums

After

    -rw-r--r-- 1 yousong yousong     304 Jan 10 17:37 config.seed
    -rw-r--r-- 1 yousong yousong    1634 Jan 11 11:10 lede-armvirt-default.manifest
    -rw-r--r-- 1 yousong yousong 1533646 Jan 11 11:10 lede-armvirt-default-rootfs.tar.gz
    -rw-r--r-- 1 yousong yousong 1802711 Jan 11 11:10 lede-armvirt-root.ext4.gz
    -rw-r--r-- 1 yousong yousong 1544593 Jan 11 11:10 lede-armvirt-rootfs.cpio.gz
    -rw-r--r-- 1 yousong yousong 1174984 Jan 11 11:10 lede-armvirt-root.squashfs.gz
    -rwxr-xr-x 1 yousong yousong 1654736 Jan 11 11:10 lede-armvirt-zImage
    -rwxr-xr-x 1 yousong yousong 2738144 Jan 11 11:10 lede-armvirt-zImage-initramfs
    drwxr-xr-x 2 yousong yousong    4096 Jan 10 17:35 packages
    -rw-r--r-- 1 yousong yousong     739 Jan 10 17:37 sha256sums

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

Update ubox to latest Git head in order to import the following fixes:

14839f0 kmodloader: make insert_module() idempotent
6e3c6dc kmodloader: add module alias awareness
9371411 kmodloader: fix out-of-bound access when parsing .modinfo
a62c946 kmodloader: modprobe: skip possible command line arguments
46a4b5f kmodloader: log to kmsg when loading directories of modules
eacc426 kmodloader: remove redundant glob wildcard char
8488bb5 ubox: Initialize conditionally uninitialized variable
db070f1 ubox: Fix some memory leaks
acc48b5 kmodloader: Fix typo in error message

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

This is how other Linux distributions are doing and kernel
modprobe_path[] of request_module() also has a default value of
/sbin/modprobe

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

A given signal-name is now converted to the corresonding number. In general
it's good style to use names (readability) and it's more portable: signal
numbers can be architecture-dependent, so we are more safe giving names.

A real world example is signal 10, which is BUS on ramips and USR1 on PPC.

All users of 'procd_send_signal' must change their code to reflect this.

Signed-off-by: Bastian Bittorf <bb@npl.de>

When relying on x.509 certs for auth and / or encryption of traffic you can't
use package openvpn-nossl.
Just have your package depend on openvpn-crypto to have SSL-encryption and
X.509-support enabled in OpenVPN. If encryption / X.509 is not a must, use
virtual packge openvpn, which is provided by all OpenVPN-variants.

Signed-off-by: Sven Roederer <devel-sven@geroedel.de>

Signed-off-by: Etienne Haarsma <bladeoner112@gmail.com>

Export gpio usb to allow power management of USB port.

Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>

ZyXEL web-flasher requires squashfs to be aligned to 64kb.

Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>

Export gpio usb to allow power management of USB port.

Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>

0f58977 init: fix /tmp permissions on zram

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

Add 'mpu' minimum length packet size parameter for scheduling/bandwidth
accounting.

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>

Add 'mpu' minimum packet length for scheduling/bandwidth accounting
purposes.

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>

ramips/rt288x WLI-TX4-AG300N was missing support for its 100Mbit switch which
should be included by default.

Signed-off-by: Yo Abe <abe.geel@gmail.com>
[Jo-Philipp Wich: picked from OpenWrt PR#359, rewrap commit msg, fix Sob]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>

Signed-off-by: Steven Honson <steven@honson.id.au>

ap_setup_locked is named wps_ap_setup_locked in uci for consistency with other
wps related uci options.

Signed-off-by: Steven Honson <steven@honson.id.au>