Introduce a new variable OUTPUT_DIR which refers to the parent bin/ directory
without the architecture specific component.

Also construct the BIN_DIR variable based on OUTPUT_DIR now and add both target
and subtarget components to it to prevent different subtargets from
overwriting each others files in bin/.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

Add a new string symbol "CONFIG_TARGET_SUBTARGET" which contains the name of
the chosen subtarget or "generic" if there are no subtargets available.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

As usual these patches were extracted from the raspberry pi repo:
https://github.com/raspberrypi/linux/commits/rpi-4.4.y



Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

This update also adds individual download of firmware files instead of fetching
every file on the repository (10-MiB vs 100+MiB).
Also copy Linux license from kernel directory instead of using the rpi-firmware
one.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Define a new alias (@GITHUB) for downloading raw files from github repos.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

The settimeofday() syscall wrapper provided by musl filters out the timezone
argument, breaking the ability to set the kernel timezone through the function.

Adjust busybox patch to issue the syscall directly in order to circumvent the
problem.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

Let DHCP client send a release when it exists so the DHCP server is
informed the IP address is released and allowing to clean up IP/mac
state info in intermediate devices.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

Update to latest HEAD in order to not clobber symlinks in /etc/config on
uci commit.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

Update to latest HEAD in order to remove the faulty "prelocal" ip rule leading
to unexpected policy rule precedence.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

Signed-off-by: John Crispin <blogic@openwrt.org>

Signed-off-by: John Crispin <blogic@openwrt.org>

https://wiki.openwrt.org/toh/omylink/omy-g1

http://www.omylink.com/



Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

SVN-Revision: 49258

Signed-off-by: Jason Wu <jason.wu.misc@gmail.com>

SVN-Revision: 49257

Tested-by: Joe Zhang <jz21082@gmail.com>
Signed-off-by: Jason Wu <jason.wu.misc@gmail.com>

SVN-Revision: 49256

This is not required as long as CONFIG_TARGET_INIT_CMD is correctly
configured.

Signed-off-by: Jason Wu <jason.wu.misc@gmail.com>

SVN-Revision: 49255

The dwc2 USB driver now works on Lantiq ar9, but the
default is still ltq-hcd-ar9. This patch switches to
dwc2 by default.

v2: all ar9 boards (v1 was just for BTHOMEHUBV3A and WBMR)

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 49254

The only way to access the u-boot console on the BTHOMEHUBV3A
is by soldering a serial console onto some really tiny pads.

To enable installation without soldering it would be helpful
to be able to modify the uboot environment from within
the ramdisk image used as part of the installation process.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 49253

Running dnsmasq in a dedicated user/group allows matching its outgoing
traffic more easily using iptables' owner match.
Add UID/GID to the package metadata and append the user/group
parameters to the init script.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 49252

Enable access to GPIO on Atheros wireless chip AR9280.
Support for 9280 is added to existing 9285/9287 subsystem
because these 3 chips differ only in number of GPIO pins.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>

SVN-Revision: 49251

Remove read-only flag on two partitions on BTHOMEHUBV3A:
  uboot-config - otherwise fw_setenv command cannot be used.
  ath9k-cal    - so that ath9k calibration data can be copied
                 to the partition on a newly installed board.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 49250

Fixes some DMA issues with this platform. Because this isn't currently accepted,
and can potentially disrupt other platforms (as read in commit log), I will
leave this cns3xxx specific.

Original Patch: https://patchwork.ozlabs.org/patch/600024/



Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 49249

Fix is required to properly set pci config bits.
Original Patch: https://patchwork.ozlabs.org/patch/596170/



Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 49248

https://wiki.openwrt.org/toh/netgear/wndr3700



wndr3700v5 uses the single-core dual thread MediaTek MT7621S SoC.

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

SVN-Revision: 49247

Change mirror to Github (Gentoo repo) and drop the gzip compression.
Worst case there's about 4kbyte increase in size but most images ends up
beign somewhere between 4-100kbyte smaller due to the lzma compression.

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>

SVN-Revision: 49246

This patch adds support for the TP-Link TL-WR740N v6 into OpenWrt trunk. Hardware wise, it's very similar to the TL-WR841N v10. See the forum thread [1]. Credit goes to the user 'traveler' who did the legwork and tested builds.

Also thanks to Matthias Schiffer for clarifying the DEVICE_PROFILE settings.

Signed-off by: Stijn Segers <francesco.borromini@inventati.org>

[1]: https://forum.openwrt.org/viewtopic.php?pid=318704

SVN-Revision: 49245

Dynamic allocation of label can be simplified.
Also add error handling to deal with failed memory allocation.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 49244

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 49243

Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
Acked-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 49242

LZMA compress the kernel without dictionary, otherwise brnboot fails to
uncompress the kernel.

The filesystem parameter of mkbrncmdline was dropped since the used
filesystem isn't exported in the kernel build step and at least in my
tests everything works without the parameter. If the parameter is
required for some reason, the static keyword "squashfs" can be used.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 49241

Required to compress kernels in a brnboot compatible way.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 49240

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 49239

Tested with VGV7510KW22NOR.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 49238

Set the kernel entry address to the same value as it is used for the old
image build build process.

Fixes boot of uImages on VGV7510KW22NOR and others.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 49237

Generate fw_env.config for BTHOMEHUBV3A.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 49236

MZK-EX300NP is MT7620A based wifi repeater.
Built-in power supply.
64MiB RAM, 8MiB SPI Flash, non Wired Ethernet.

Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com>

SVN-Revision: 49235

CS-QR10 is MT7620A based IP Camera.

the camera and sound does not work with kernel 4.4.
 - camera chip is sn9c291.
 - sound chip is wm8960.

Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com>

SVN-Revision: 49234