- May 23, 2015
-
-
John Crispin authored
There are already ifx_pcie_bios_{map_irq,plat_dev_init} hooks defined in ifxmips_pcie.c. Instead of defining a new hook we simply re-use the existing ones (this is basically what the lantiq BSP code does). Signed-off-by:Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 45718
-
John Crispin authored
The PCIe bus seems to require a hack/workaround when PCI is enabled as well. Unfortunately this is guarded by an CONFIG_IFX_PCI ifdef, which is only defined in lantiq's BSP code. The config symbol for the upstream lantiq PCI driver is CONFIG_PCI_LANTIQ. Signed-off-by: -
Hauke Mehrtens authored
There is also a OHCI controller, activate it for USB 1.1 support. This should close #19601. Signed-off-by:Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 45716
-
- May 22, 2015
-
-
Jonas Gorski authored
3.18.13 introduced a bunch of new errata, enable them to be on the safe side. Signed-off-by:Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45715
-
Jonas Gorski authored
Signed-off-by: -
Florian Fainelli authored
Simply disable the build of the "doc" and "tests" directories to speed up the build and avoid the potential for errors coming from external tools being used (e.g: source-highlight installed on a non-standard location). Signed-off-by:Florian Fainelli <florian@openwrt.org> SVN-Revision: 45713
-
Jonas Gorski authored
If the first resolveip call will fail, peeraddr will be now empty, and the subsequent resolveip call will try to resolve an empty string. Fix this by storing the result in a temporary variable. Signed-off-by:
-
- May 21, 2015
-
-
Jonas Gorski authored
Changelogs: * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.12 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.13 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.14 Build tested on brcm63xx and ipq806x, runtested on brcm63xx. Signed-off-by:
-
Jonas Gorski authored
3.18.12 backported 61ada528dea028331e99e8ceaed87c683ad25de2 ("sched/wait: Provide infrastructure to deal with nested blocking") from 3.19, causing the following error on load: [ 13.588000] compat: exports duplicate symbol woken_wake_function (owned by kernel) Fix this by guarding it with a check for 3.18.11 or earlier instead of 3.19. Signed-off-by: -
Jonas Gorski authored
Add it to the appropriate places so the power led properly works and ethernet is properly configured for failsafe. Signed-off-by: -
Jonas Gorski authored
This patch adds support for the Huawei HG655b. Nothing much special in this router, it's just another BCM6368 with a Ralink RT3062 wifi chip and the calibration data embedded in the main flash chip at offset 0x7c0000. There is also configuration data used by the OEM firmware before the cal_data partition, this area is protected by the board_data partition in this patch. Signed-off-by:
Daniel Gonzalez <dgcbueu@gmail.com> Signed-off-by:
-
Steven Barth authored
Signed-off-by:Steven Barth <steven@midlink.org> SVN-Revision: 45707
-
- May 20, 2015
-
-
Steven Barth authored
Commit 5168c9a5702648eb690d32ec821647aca80aeba9 introduced a regression during patch application on the 4.0 kernel. Some of the patched content doesn't match the actual code, therefore leading to the following error: Applying patch generic/667-ipv6-Fixed-source-specific-default-route-handling.patch patching file net/ipv6/ip6_output.c Hunk #1 FAILED at 886. 1 out of 1 hunk FAILED -- rejects in file net/ipv6/ip6_output.c patching file net/ipv6/route.c Hunk #1 succeeded at 2247 (offset 2 lines). Patch generic/667-ipv6-Fixed-source-specific-default-route-handling.patch does not apply (enforce with -f) This change just adapts the actual patch to fix what is in kernel 4.0 and make it apply cleanly. Signed-off-by:Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 45705
-
- May 19, 2015
-
-
Imre Kaloz authored
Signed-off-by:Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 45704
-
Hauke Mehrtens authored
Fedora 22 includes gcc5 by default build leads to error: include/linux/compiler-gcc.h:114:30: fatal error: linux/compiler-gcc5.h: No such file or directory backport upstream patch: "Add linux/compiler-gcc5.h to fix builds with gcc5" id: 478b02f1a7043b673565075ea5016376f3293b23 Issue was reported at https://forum.openwrt.org/viewtopic.php?id=56853 & replicated in a VM created, flashed and tested ar71xx image successfully as test Signed-off-by:
Dirk Neukirchen <dirkneukirchen@web.de> Signed-off-by:
-
Jonas Gorski authored
Instead of stripping everything after the first dot, strip everything after the last dot. This fixes pre-/postrm actions for packages with a dot in their name, like libusb-1.0. Fixes #19668. Signed-off-by: -
Steven Barth authored
Signed-off-by: -
Steven Barth authored
Signed-off-by: -
Steven Barth authored
Signed-off-by:
-
- May 17, 2015
-
-
Jo-Philipp Wich authored
Signed-off-by:Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 45695
-
Rafał Miłecki authored
Signed-off-by:Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45694
-
Steven Barth authored
Bump dnsmasq to v2.73rc8 Important - fixes remotely exploitable buffer overflow introduced in all v2.73 test/release candidates. Signed-off-by:Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk> SVN-Revision: 45693
-
- May 16, 2015
-
-
Rafał Miłecki authored
This device seems to have switch port 7 connected to the CPU: vlan1ports=1 2 3 5 7* vlan2ports=0 7u it should be handled by eth1 and NVRAM seems to confirm that (no et0macaddr entry, existing et1macaddr & et1phyaddr entries). One of the remaining ports (4/8?) may be connected to the Quantenna SoC. Original firmware boot log contains following messages: (0x00,0x5d)Port 5 States Override: 0xfb (0x00,0x5f)Port 7 States Override: 0xfb (0x00,0x0e)Port 8 States Override: 0x0a (why does it force port 5 state?!) Signed-off-by: -
Rafał Miłecki authored
Signed-off-by: -
Rafał Miłecki authored
Signed-off-by:Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 45690
-
Steven Barth authored
Signed-off-by: -
Steven Barth authored
Signed-off-by:
-
- May 13, 2015
-
-
Rafał Miłecki authored
Signed-off-by: -
Rafał Miłecki authored
Signed-off-by: -
Rafał Miłecki authored
Signed-off-by: -
Rafał Miłecki authored
Signed-off-by: -
Rafał Miłecki authored
Signed-off-by: -
Rafał Miłecki authored
It has 3 Ethernet interfaces, each of them connected to separated switch port. Default NVRAM uses switch port 8 as CPU which is connected to the 3rd interface (eth2). Signed-off-by: -
Rafał Miłecki authored
Signed-off-by: -
Steven Barth authored
Signed-off-by: -
Rafał Miłecki authored
Signed-off-by: -
Rafał Miłecki authored
Signed-off-by:
-
- May 12, 2015
-
-
Rafał Miłecki authored
This chipset has at least 8 usable ports, e.g. Netgear R8000 has ports 5, 7 and 8 connected to Ethernet interfaces: vlan1ports=0 1 2 3 5 7 8* vlan2ports=4 8u Port 6 seems to be always disabled. Signed-off-by:
-
- May 11, 2015
-
-
Steven Barth authored
Signed-off-by: -
Felix Fietkau authored
Signed-off-by:Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45674
-
