Skip to content
Snippets Groups Projects
Select Git revision
0 results
Search by author
  • Any Author
0 authors
  1. May 25, 2017
    • Kenneth Johansson's avatar
      sysupgrade: run only one instance at a time. · e96a9a9a
      Kenneth Johansson authored 
      
Things do not work well if running multiple instances of
upgrade at the same time.

Signed-off-by: default avatarKenneth Johansson <kenneth.johansson@inteno.se>
      e96a9a9a
    • Florian Fainelli's avatar
      include: Determine MODULES_DIR correctly for external/git kernels · 8e0e0e7d
      Florian Fainelli authored 
      
When using external or git cloned kernels, any kind of modifications
will alter KERNELRELEASE. LEDE still tries to stage modules in
lib/modules/$(LINUX_UNAME_VERSION) and LINUX_UNAME_VERSION is based on
KERNEL_PATCHVER (indirectly) so this does not work, and we lose all
kinds of automatic modules loading.

To remedy that, just cat $(LINUX_DIR)/include/config/kernel.release
which is late enough the kernel has prepared this file, and is correctly
tracking changes done throughout the kernel.

Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      8e0e0e7d
    • Florian Fainelli's avatar
      include: Do not alter KERNELRELEASE for external/git kernels · b6746a6f
      Florian Fainelli authored 
      
In case we use external and/or git cloned kernels, let the kernel
determine the appropriate KERNELRELEASE. We cannot used
LINUX_UNAME_VERSION because that one gets determined at a later time,
when the kernel is already built proper.

Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      b6746a6f
    • Florian Fainelli's avatar
      Revert "kernel: prevent addition of scm marker to localversion" · d0a63407
      Florian Fainelli authored 
      
This reverts commit 0df2c656 since it
gets in the way of identifying properly which kernel we are running.
This is particularly important if LEDE is using external kernels/git
cloned kernels. We want to make sure we only load modules from that
specific kernel.

Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      d0a63407
    • Roman Spychała's avatar
      kernel: add kmod-usb-net-pl package · 855f2ae4
      Roman Spychała authored 
      
Kernel support for Prolific PL-2301/2302/25A1 based cables

Signed-off-by: default avatarRoman Spychała <roed@onet.eu>
      855f2ae4
    • René Mayrhofer's avatar
      Make GBit switch work on RB2011 · e457d222
      René Mayrhofer authored 
      This change is required to make the GBit switch work on my Mikrotik Routerboard RB2011UiAS-RM, and I assume that the other RB2011 variants are exactly the same in terms of the switch. I have tested the board without and with the patch and confirm that the GBit ports are not supported at all (i.e. no communication works) with the current version in trunk and that everything works with the patch applied. The test box has been running for a few days with the patch applied, and does not show any performance problems in a test setting. I have not used it with LEDE in production so far, but with a previous turnk version of OpenWRT for many years - with the same patch applied. I therefore have good indication that it is stable.

For the record, the switch chip on my test box is identified as
	switch0: Atheros AR8327 rev. 4 switch registered on ag71xx-mdio.0

The value 0x6f000000 has been taken from the table at https://wiki.openwrt.org/toh/mikrotik/rb2011uias with the previous discussion thread still online at https://lists.openwrt.org/pipermail/openwrt-devel/2014-December/029949.html.
One definite improvement from the older OpenWRT trunk version I have been running in production and current LEDE trunk is that the SFP interface can be kept in the default configuration without excessive kernel messages about it constantly going up and down. I have not yet tested an actual SFP module, though.

Performance seems to be reasonable. Routing between two GBit ports on that switch separated by different VLANs with the default firewall ruleset (and one additional rule two allow traffic between the VLANs), but without NAT, iperf3 results are:
	[ ID] Interval           Transfer     Bandwidth       Retr
	[  4]   0.00-10.00  sec   508 MBytes   426 Mbits/sec  102             sender
	[  4]   0.00-10.00  sec   506 MBytes   425 Mbits/sec                  receiver
With a connection going through NAT (also 2 ports on the same GBit switch, same ruleset, but NAT active), routing performance drops to around 250 MBit/s.
(Note that RouterOS achieves beyond 900 MBit/s on the same hardware with the default rule set and the FastTrack rule active even for NAT, see https://wiki.mikrotik.com/index.php?title=Manual:IP/Fasttrack and http://www.mikrotik.com/download/share/FastTrack.pdf

).

Summarizing, I strongly recommend to apply this patch in trunk, so that the GBit switch chip rev. 4 can be supported upstream in the next LEDE release (hopefully soon).

Signed-off-by: default avatarRené Mayrhofer <rene@mayrhofer.eu.org>
      e457d222
    • Matthias Fritzsche's avatar
      ar71xx: change image version for ubiquiti devices · a4e63e26
      Matthias Fritzsche authored 
      
changes the image version from hardcoded OpenWrt to
$VERSION_DIST. AirOS shows a notification with the image version
during a firmware upgrade.

fixes #582

Signed-off-by: default avatarMatthias Fritzsche <txt.file@txtfile.eu>
      a4e63e26
  3. May 24, 2017
  5. May 23, 2017
  7. May 22, 2017
    • Hans Dedecker's avatar
      dnsmasq: bump to 2.77rc5 · 43cc3998
      Hans Dedecker authored 
      
Some small tweaks and improvements :

9828ab1 Fix compiler warning.
f77700a Fix compiler warning.
0fbd980 Fix compiler warning.
43cdf1c Remove automatic IDN support when building i18n.
ff19b1a Fix &/&& confusion.
2aaea18 Add .gitattributes to substitute VERSION on export.

Signed-off-by: default avatarHans Dedecker <dedeckeh@gmail.com>
      43cc3998
    • Hans Dedecker's avatar
      6rd: add 6rd specific settings as nested json object · c0a9a733
      Hans Dedecker authored 
      
Add 6rd specific settings prefix, relay-prefix as a nested data json object

Signed-off-by: default avatarHans Dedecker <dedeckeh@gmail.com>
      c0a9a733
    • Hans Dedecker's avatar
      netifd: update to git HEAD version · 5f2408db
      Hans Dedecker authored 
      
7573880 system-linux: parse 6rd specific settings as nested json data object
a063705 system-linux: remove redundant check for strtoul() return value
e6ebe0b build: disable unknown warning option error in clang
08d8f47 interface: add new "ifup-failed" hotplug event
20a1bac bridge: reset primary only after marking the member not present
6b9c267 build: suppress format truncation warnings to avoid errors with gcc7

Signed-off-by: default avatarHans Dedecker <dedeckeh@gmail.com>
      5f2408db
    • Rafał Miłecki's avatar
      umdns: update to the version 2017-05-22 · aaabf47e
      Rafał Miłecki authored 
      
This includes following changes:
0e8b948 Support specifying instance name in JSON file
49fdb9f Support PTR queries for a specific service
26ce7dc Allow filtering with instance name in service_reply
920c62a Store instance name in the struct service
ff09d9a Rename service_name function to the service_instance_name
64f78f1 Rename mdns_hostname variable to the umdns_host_label

Previous package update pulled commit 70c66fbbcde86 ("Fix sending
replies to PTR questions") which introduced a regression which this
update fixes.

Signed-off-by: default avatarRafał Miłecki <rafal@milecki.pl>
      aaabf47e
    • Felix Fietkau's avatar
      fstools: update to the latest version · 65a3dc27
      Felix Fietkau authored 
      
88d48d5 libfstools: silence mkfs.{ext4,f2fs}
a19f2b3 build: disable the format-truncation warning error to fix gcc 7 build errors
633a8d0 libfstools: fix multiple volume_identify usages with the same volume
c43ae11 fstools: use -Wno-format-truncation instead of -Wno-error=format-truncation

Signed-off-by: default avatarFelix Fietkau <nbd@nbd.name>
      65a3dc27
    • Yousong Zhou's avatar
      libunwind: update to 1.2 · 5d48dc11
      Yousong Zhou authored 
      
Addresses CVE-2015-3239: Off-by-one error in the dwarf_to_unw_regnum
function in include/dwarf_i.h in libunwind 1.1 allows local users to
have unspecified impact via invalid dwarf opcodes.

Upstream stable-v1.2 fixed the missing unwind_i.h issue but no new
tarball is released yet

Signed-off-by: default avatarYousong Zhou <yszhou4tech@gmail.com>
      5d48dc11
  9. May 21, 2017
  11. May 20, 2017
  13. May 19, 2017
  15. May 18, 2017
  17. May 16, 2017