SVN-Revision: 35753

SVN-Revision: 35750

SVN-Revision: 35749

The NO_IRQ symbol is not used by the amba core since
upstream commit:

  dfb85185bda373a70409c70c2632b02fb0f8f449
  AMBA: get rid of last two uses of NO_IRQ

  This gets rid of the last two users of NO_IRQ in AMBA primecell
  drivers.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35748

The amba core throws a warning if -1 is used as an
irq value since upstream commit:

  2eac58d5026e4ec8b17ff8b62877fea9e1d2f1b3
  ARM: amba: make use of -1 IRQs warn

  Make the core warn about the use of -1 (NO_IRQ)

Cange the value of the unused IRQs to zero for the
UART devices to get rid of the warning.

Based on #12729.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35747

SVN-Revision: 35745

SVN-Revision: 35744

SVN-Revision: 35743

Signed-off-by: Geoff Levand <geoff@infradead.org>

SVN-Revision: 35741

	- all uci rules are boxed in custom chains now, so a firewall stop leaves user rules intact
	- properly handle selective ipv4 or ipv6 only firewall start/stop/restart actions
	- support ip ranges (e.g. option src_ip '!192.168.1.1-192.168.1.100' -> -m iprange ! --src-range 192.168.1.1-192.168.1.100')
	- support time options (e.g. option weekdays 'Mon Tue Sat' -> -m time --weekdays 1,2,6')

SVN-Revision: 35738

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35737

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35736

Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35735

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35734

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35733

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35732

Use the same MAC addresses as the original firmware.

Based on a patch from #10421.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Tested-by: Gabor Varga <vargagab@gmail.com>

SVN-Revision: 35730

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35729

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35728

This builds and boots.

Because of the function pointer indirection (e.g. mtd_info's read
function pointer is assigned to spiflash_read), it is difficult for me
to understand where the calls are coming from (could be anywhere,
conditionally pointing at spiflash versions), so I punted and used the
renamed function pointers (_erase, _read, _write).  If someone knows
better what to do, please fix.

Cleaned up other sundry kernel tracking issues like get_phy_id and
__devinit,etc.

[juhosg: don't switch to that yet]

Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35727

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35726

Fix sysupgrade for tag-version 7 and 8.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 35724

Setting this bit stops BCM53125 (bgmac actually) from receiving any
packets. This bit is cleared conditionally in b53_switch_reset and it
seems the same is done in bcmrobo.c which never sets that bit again.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 35723

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 35722

Makes warnings/errors visible when building with V=w/V=1.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35721

Makes warnings/errors visible when building with V=w/V=1.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35720

Makes warnings/errors visible when building with V=w/V=1.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35719

Makes warnings/errors visible when building with V=w/V=1.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35718

Makes warnings/errors visible when building with V=w/V=1.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35717

Makes warnings/errors visible when building with V=w/V=1.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35716

Makes warnings/errors visible when building with V=w/V=1.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35715

Makes warnings/errors visible when building with V=w/V=1.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35714

Makes warnings/errors visible when building with V=w/V=1.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35713

To prevent accidential resets ask for confirmation (and default to n).

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35712

Multiple drivers were missing their DRIVER_11N_SUPPORT despite
supporting 11N capable cards.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35711

They either work around missing implementations in uClibc 0.9.30 and
earlier and add already present functionality.

Closes #11210, #11211.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35710

Based on a patch from Oliver Metz.

Closes #10735.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35709

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35708

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35707

PTP for gianfar can be built as a module. Create a package for it.

[juhosg: remove the mp85xx specific patch]

Patchwork: http://patchwork.openwrt.org/patch/3344/


Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35706