Instead of only using tagged CPU port configurations when more than one VLAN
is present on the switch, always emit tagged configurations unless a board
explicitely opts out of this behaviour by using the previously introduced
[0-9]u@netdev syntax.

Emitting default tagged configurations has the following benefits:

 - Relation of switch vlans to netdevs is easier to understand, especially
   for multi-cpu-port switches

 - Adding additional VLANs (e.g. to break out a LAN port for other purposes)
   becomes easier as users are not forced to change the existing untagged
   VLAN to tagged and the existing ifname notation from ethX to ethX.Y
   anymore, drastly reducing the likelyhood of soft-bricks.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

In order to prepare support for generating tagged switch configurations by
default, explicitely request untagged configs for boards which do not already
request tagging to retain default behaviour.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

Use silent make invocations for sub-makes like build_image or checksum to
avoid bloating the IB output with non-status info.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

3317c86 dhcpv6-ia: apply lease delete based on assignment bound state
df50429 odhcpd: properly handle netlink messages (FS#388)
83d72cf odhcpd: fix coding style

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

This backports upstream commit 62e13097c46c ("net: phy: broadcom: rehook
BCM54612E specific init")

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Fixes firmware crash in rare cases and a bug
ath10k_pci 0001:01:00.0: received unexpected tx_fetch_ind event: in
push mode
for those who kept experiencing it after previous firmware update.

Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>

Uses upstream code to parse DT supported band/frequency information.
Update existing .dts files to the new format and remove unnecessary
overrides.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

These devices don't have a secondary wifi chip

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

And, update support for 9880 chipsets.  The new firmware
fixes a regression with EAPOL 4/4 packets added in
a recent commit.

It also fixes a case where the firmware would improperly try
to use STBC when configured for 1x1 (as 9887 always is).

Signed-off-by: Ben Greear <greearb@candelatech.com>

The driver had a bug when calculating the rateset.  This resolves
that and allows full VHT mcs rates on 2x2 hardware.

Signed-off-by: Ben Greear <greearb@candelatech.com>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

The short git hash suffix printed by getver.sh is taken from the
latest local commit, change this to use the hash from latest
upstream commit if available. This is considered the intended
behavior based on commit message a642a11f,
introducing getver.sh.

Signed-off-by: Magnus Kroken <mkroken@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

We override default Ethernet interface with eth0 which often uses random
MAC due to missing proper NVRAM entry. Fix this by manually assigning
MAC in the config.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

Remove gcc testsuite, ada and libjava (if not selected)

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Since the main stamp file depends on the _check stampfile, the _check
stampfile needs to be created on the first run as well.

Fixes spurious rebuilds with CONFIG_AUTOREBUILD=y

Signed-off-by: Felix Fietkau <nbd@nbd.name>

All mvebu boards have three USB LEDs. The first one is used for the
USB1 port.

There are two LEDs related to the second USB port. The top (bar) LED
gets bright in case any USB device is connected to the second USB port.

If the connected device is an USB 3 (SuperSpeed) device, the small dot
LED bellow the "bar" LED gets also bright.

While at it, use a name for the USB LEDs that matches the names printed
on the case.

Fixes: FS#423, FS#425

Signed-off-by: Kabuli Chana <newtownbuild@gmail.com>
Signed-off-by: Mathias Kresin <dev@kresin.me>

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

This is a pure rename without any changes. It makes maintaining bgmac
simpler and will hopefully make adding new kernel a bit easier.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

Fixes DFS detection false positive issues

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

Some debugging/error messages are printed using wpa_printf and this
change allows finally reading them out of the syslog.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

This will allow starting hostapd with the new -s parameter and finally
read all (error) messages from the syslog.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

This needs to be refined and reworked before we can safely leave it
enabled by default

Signed-off-by: Felix Fietkau <nbd@nbd.name>

- fixes unaligned acccesses, causing DNS parsing issues on ARMv5
- fixes service timeout handling

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Avoid treating error pages as successfully downloaded content

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Buffalo WCR-1166DS is a small wireless router with

 - MT7628AN + MT7612E
 - 64MiB DDR2 SDRAM
 - 16MiB SPI flash
 - 2T2R 11ac/a/b/g/n Wi-Fi
 - 2x 10/100M ethernet switch
 - 8x programmable LED
 - 3x button
 - UART pad on PCB (J2: 3.3V, GND, TX, RX)

factory image can be installed via stock web UI.

due to the "dual image" function in the bootloader, the second half of
the SPI flash ("firmware2" partition) cannot be used as a part of the
file system.

Signed-off-by: FUKAUMI Naoki <naobsd@gmail.com>

only factory images for DHP-EU and DHP2-JP (fw ver. 2.x) are built.

this will not work for DHP-JP/AP/TW (fw ver. 1.x) because they use
different buffalo_csum() formula.

Signed-off-by: FUKAUMI Naoki <naobsd@gmail.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

some of Buffalo DHP series use slightly different trx magic, buffalo-enc,
buffalo-tag, and factory image begin with 'bgn'.

this patch adds support for building those images.

Signed-off-by: FUKAUMI Naoki <naobsd@gmail.com>