Introduce support for a new [0-9]u@netdev syntax to ucidev_add_switch() to let
board.d network files request default network switch configurations which do
not use tagged CPU ports.

This commit itself has no effect on generated configurations at the moment
since we still emit untagged configurations by default but it allows boards to
opt-out from default tagged configs in case we start emitting tagged settings
by default.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

This helper allows using usbport trigger directly. It requires usbport
compatible syntax and supports specifying multiple USB ports, e.g.:
ucidef_set_led_usbport "usb" "USB" "devicename:colour:function" "usb1-port1" "usb2-port1"

This adds a proper object to the board.json, e.g.
"usb": {
	"name": "USB",
	"type": "usbport",
	"sysfs": "devicename:colour:function",
	"ports": [
		"usb1-port1",
		"usb2-port1"
	]
}
and supports translating it into uci section.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

Allow passing a filename to change the location of the generated
board.json.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Add support for handling port_state LEDs as used by ADM5120.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

base-files: add function ucidef_set_interface_raw to enable default configuration on interfaces other than lan and wan.

Signed-off-by: Micke Prag <micke.prag@telldus.se>

SVN-Revision: 48976

We are now shipping a DSL firmware, do not set it by default to some
file name.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48941

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 48806

This patch adds extra parameter to switch LED trigger initialization
functions.  New functionality maintains backward compatibility, so
calling functions without setting new speed_mask parameter works
as expected.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>

SVN-Revision: 48776

oneshot and timer have the same configuration options, just a different
trigger name.

Signed-off-by: Karl Palsson <karlp@etactica.com>

SVN-Revision: 48770

Remove usage of dd, as per request from Yousong Zhou.
<https://lists.openwrt.org/pipermail/openwrt-devel/2015-December/037743.html

>

Signed-off-by: Chris R Blake <chrisrblake93@gmail.com>

SVN-Revision: 47949

The MR18 stores the ath9k eeprom values on the NAND.
This patch makes it possible to retrieve the images
from there.

Signed-off-by: Chris R Blake <chrisrblake93@gmail.com>

SVN-Revision: 47948

Replace former uci-defaults.sh implementation with the uci-defaults-new.sh one
and update all users accordingly.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47867

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47762

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47752

This adds support for specifying the dsl modem, atm bridge configs and setting
the pppoe protocol for wan.

These additions are required to port the Lantiq target to board.d.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47750

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47744

Some boards, e.g. the Sheeva Plug, require the lan interface to be set
to DHCP instead of a static address, therfore support that.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47732

Add ucidef_set_led_timer() and handling for it to config_generate.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47731

Add ucidef_set_led_ide() to define "ide-disk" triggered leds.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47729

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47728

This changes uci-defaults-new.sh, config_generate and all relevant board.d
files in order combine ucidef_add_switch() and ucidef_add_switch_ports() into
a single function.

Also removes now superfluous enable and reset arguments.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47721

Out of 69 switch definitions, only 3 pass something different than "1" as
values for reset and enable, with one of those three being invalid.

This change ...

 * removes the reset and enable arguments from ucidef_add_switch()
 * unconditionally writes reset:1 and enable:1 to JSON
 * converts the three users of nonstandard values to ucidef_add_switch_attr()

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47720

Remove support for now unused ucidef_add_switch_vlan(), move port->vlan and
vlan->interfaces conversion to uci-defaults-new.sh and massively simplify
config_generate.

This change prepares the following upcoming steps:

 * Eliminate use of ucidef_set_interface_lan_wan() for switch only devices
 * Merge ucidef_add_switch() with ucidef_add_switch_ports()

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47719

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47679

Properly quote variables in ucidef_set_interface_lan() and
ucidef_set_interface_lan(), otherwise interfaces with multiple devices
are not properly written into the configuration.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47673

Add ucidef_set_board_id() and ucidef_set_model_name() procedures to store
model information in the board.json file.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47671

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47660

The only user was the hg255d board and config_generate did not even emit
proper uci for it.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47658

Remove extra nesting of rssi leds in the led object and move rssi monitor
declaration to its own object.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47655

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47652

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47645

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47644

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47643

Add further helper functions to uci-defaults-new.sh for easier declarations
of complex switch layouts.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47638

Even though there are not many users left within the OpenWrt tree it seems
this function broke during the kernel 3.18 transition.

Fix it by providing a workdir as required by overlayfs.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 47015

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46794

Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>

SVN-Revision: 46341

Internal GPIO pins are used for PoE passthrough setups in multi-port
routers. This patch implemnets control over this hardware feature for
Ubiquiti Nanostations and TP-Link CPE510.

Signed-off-by: Lars Kruse <lists@sumpfralle.de>

SVN-Revision: 46271

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 44446