The most significant change from the previous version is the trimming of
the 300-ip_tiny.patch to lib/utils.c where a section previously patched
had vanished.  That section of the patch was removed.

Built and lightly tested on ar71xx against uClibc and musl.

Signed-off-by: Russell Senior <russell@personaltelco.net>

SVN-Revision: 45512

Profile definitions need to be checked and fixed before this patch can
be applied again.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45511

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45510

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45509

cmake.mk: enable -Bsymbolic-functions by default for linking shared libs, slightly improves performance and compression

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45508

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45507

Refresh patches to remove the trailing whitespaces caused by an old
diffutils version on osx.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45506

This should rather be done by passing appropriate platform_data/OF, but
should suffice for now.

Fixes e.g. GbE ports on BCM963268BU_P300.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45505

At least the third rgmii port is available on 63169, so assume all are
available. Simplifies cpu vs. variant handling.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45504

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45503

- Fix profile name.
- Rremove whitespace on board patch.
- Refresh patches.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45499

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45498

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45497

base-files: make the generic sysinfo script run earlier to allow the mount_root script to pick up the board name

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45496

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45495

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45494

fixes dbclient login into OpenSSH 6.8p1
error: "Bad hostkey signature"

reported on irc, replicated with Arch Linux

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 45493

Hostapd's control file location was changed in 2013, and that has apparently
broken the wps button hotplug script in cases where there are multiple radios
and wps is possibly configured also for the second radio. The current wps
button hotplug script always handles only the first radio.

https://dev.openwrt.org/browser/trunk/package/network/services/hostapd/files/wps-hotplug.sh

The reason is that the button hotplug script seeks directories like
/var/run/hostapd*, as the hostapd-phy0.conf files were earlier in
per-interface subdirectories.

Currently the *.conf files are directly in /var/run and the control sockets
are in /var/run/hostapd, but there is no subdirectory for each radio.

root@OpenWrt:/# ls /var/run/hostapd*
/var/run/hostapd-phy0.conf  /var/run/hostapd-phy1.conf

/var/run/hostapd:
wlan0  wlan1

The hotplug script was attempted to be fixed after the hostapd change by
r38986 in Dec2013, but that change only unbroke the script for the first
radio, but left it broken for multiple radios.
https://dev.openwrt.org/changeset/38986/



The script fails to find subdirectories with [ -d "$dir" ], and passes just
the only found directory /var/run/hostapd, leading into activating only the
first radio, as hostapd_cli defaults to first socket found inthe passed
directory:
root@OpenWrt:/# hostapd_cli -?
...
usage: hostapd_cli [-p<path>] [-i<ifname>] [-hvB] [-a<path>] \
                    [-G<ping interval>] [command..]
...
    -p<path>     path to find control sockets (default: /var/run/hostapd)
...
    -i<ifname>   Interface to listen on (default: first interface found in the
                 socket path)

Below is a run with the default script and with my proposed solution.

Default script (with logging added):
==================================
root@OpenWrt:/# cat /etc/rc.button/wps
#!/bin/sh

if [ "$ACTION" = "pressed" -a "$BUTTON" = "wps" ]; then
         for dir in /var/run/hostapd*; do
                 [ -d "$dir" ] || continue
                 logger "WPS activated for: $dir"
                 hostapd_cli -p "$dir" wps_pbc
         done
fi

 >>>> WPS BUTTON PRESSED <<<<<

root@OpenWrt:/# hostapd_cli -p /var/run/hostapd -i wlan0 wps_get_status
PBC Status: Active
Last WPS result: None
root@OpenWrt:/# hostapd_cli -p /var/run/hostapd -i wlan1 wps_get_status
PBC Status: Timed-out
Last WPS result: None
root@OpenWrt:/# logread | grep WPS
Tue Apr 14 18:38:50 2015 user.notice root: WPS activated for: /var/run/hostapd

wlan0 got WPS activated, while wlan1 remained inactive.

I have modified the script to search for sockets instead of directories and
to use the "-i" option with hostapd_cli, and now the script properly
activates wps for both radios. As "-i" needs the interface name instead of
the full path, the script first changes dir to /var/run/hostapd to get simply
the interface names.

Modified script (with logging):
===============================
root@OpenWrt:/# cat /etc/rc.button/wps
#!/bin/sh

if [ "$ACTION" = "pressed" -a "$BUTTON" = "wps" ]; then
         cd /var/run/hostapd
         for dir in *; do
                 [ -S "$socket" ] || continue
                 logger "WPS activated for: $socket"
                 hostapd_cli -i "$socket" wps_pbc
         done
fi

 >>>> WPS BUTTON PRESSED <<<<<

root@OpenWrt:/# hostapd_cli -p /var/run/hostapd -i wlan0 wps_get_status
PBC Status: Active
Last WPS result: None
root@OpenWrt:/# hostapd_cli -p /var/run/hostapd -i wlan1 wps_get_status
PBC Status: Active
Last WPS result: None
root@OpenWrt:/# logread | grep WPS
Tue Apr 14 18:53:06 2015 user.notice root: WPS activated for: wlan0
Tue Apr 14 18:53:06 2015 user.notice root: WPS activated for: wlan1

Both radios got their WPS activated properly.

I am not sure if my solution is optimal, but it seems to work. WPS button is
maybe not that often used functionality, but it might be fixed in any case.
Routers with multiple radios are common now, so the bug is maybe more
prominent than earlier.

The modified script has been in a slightly different format in my community
build since r42420 in September 2014.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>

SVN-Revision: 45492

The new building code included the rootfs twice when building tplink initramfs images.
To make it more readable move initramfs into an own build step
Build/mktplinkfw-initramfs.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 45491

There are 2 images missing: TLWR2543 TLWR1043V2 which have special properties

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 45490

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 45489

The new image size is verified by a running tplink device and checked
against mktplinkfw source code.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 45488

The last line of procd.sh has a reference to procd_add_interface_reload. procd_add_interface_reload
doesn't seem to exist. I've removed the reference of it to minimize confusion.

Signed-off-by: Eric Schultz <eschultz@prplfoundation.org>

SVN-Revision: 45487

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45486

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45483

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45482

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45481

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45480

Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 45479

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45478

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45477

Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 45476

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45475

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45474

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45473

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45472

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45471

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45470

The mips74k subtarget of brcm47xx configures gcc to compile for mips32r2;
however, the generated kernel config for 3.14 and later kernels ends up
with CPU_MIPS32_R1 and CPU_MIPSR1 selected.  The generated kernel config
for the 3.10 kernel (Barrier Breaker) properly selected CPU_MIPS32_R2 and
CPU_MIPSR2.  Modify the default kernel config for mips74k to explicitly
select CPU_MIPS32_R2 and CPU_MIPSR2.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
Tested-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45469

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45468