- Feb 16, 2014
-
-
Luka Perkov authored
Signed-off-by:Luka Perkov <luka@openwrt.org> SVN-Revision: 39598
-
Steven Barth authored
SVN-Revision: 39597
-
Luka Perkov authored
The dockstar doesn't have any sata ports. Signed-off-by:Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 39596
-
Luka Perkov authored
Signed-off-by: -
Luka Perkov authored
Signed-off-by:
-
- Feb 15, 2014
-
-
Luka Perkov authored
The board is optimized for ubi(fs) and boots OpenWrt without changes to uboot environment if OpenWrt's uboot package is used. In order to flash the image run following commands in uboot shell: nand erase 0x200000 0xfe00000 ubi part root ; ubi remove rootfs ; ubi create rootfs tftpboot 0x800000 openwrt-kirkwood-dockstar-rootfs.ubifs ; ubi write 0x800000 rootfs ${filesize} ; reset Signed-off-by: -
Luka Perkov authored
The board is optimized for ubi(fs) and boots OpenWrt without changes to uboot environment if OpenWrt's uboot package is used. In order to flash the image run following commands in uboot shell: nand erase 0x200000 0xfe00000 ubi part root ; ubi remove rootfs ; ubi create rootfs tftpboot 0x800000 openwrt-kirkwood-ib62x0-rootfs.ubifs ; ubi write 0x800000 rootfs ${filesize} ; reset Signed-off-by: -
Luka Perkov authored
Previous patch was pushed due to false user report. While at it fix alphabetic ordering. The board is optimized for ubi(fs) and boots OpenWrt without changes to uboot environment if OpenWrt's uboot package is used. In order to flash the image run following commands in uboot shell: nand erase 0x200000 0x1fe00000 ubi part root ; ubi remove rootfs ; ubi create rootfs tftpboot 0x800000 openwrt-kirkwood-iconnect-rootfs.ubifs ; ubi write 0x800000 rootfs ${filesize} ; reset Signed-off-by: -
Luka Perkov authored
Tested on: * Cloud Engines Pogoplug E02 * RaidSonic ICY BOX IB-NAS62x0 * Iomega Iconnect Some users are avoiding to replace their bootloader, because of that add support for second stage u-boot image. Having ubifs capable bootloader is required in order to boot current OpenWrt trunk. Sample ib62x0 commands for running second stage bootloader: tftpboot 0x800000 uboot-kirkwood-ib62x0_second_stage/openwrt-kirkwood-ib62x0_second_stage-u-boot.img bootm 0x800000 Sample ib62x0 commands for flashing second stage bootloader: tftpboot 0x800000 uboot-kirkwood-ib62x0_second_stage/openwrt-kirkwood-ib62x0_second_stage-u-boot.img nand erase 0x100000 0x100000 ; nand write 0x800000 0x100000 0x${filesize} nand read 0x800000 0x100000 0x100000 ; bootm 0x800000 While at it include parallel build support, use alphabetic order of the boards and introduce common OpenWrt configuration. Signed-off-by: -
Luka Perkov authored
Signed-off-by:Antonios Vamporakis <ant@area128.com> SVN-Revision: 39589
-
Luka Perkov authored
Signed-off-by: -
Luka Perkov authored
Some ARV4510PW units seem to have unstable PCI due to missing pull-up resistors. This patch makes sure that the GPIO lines are driven properly. Signed-off-by:Matti Laakso <malaakso@elisanet.fi> SVN-Revision: 39587
-
- Feb 14, 2014
-
-
Steven Barth authored
6in4 historically allowed an ip6addr without a mask however the newly introduced source-routing segfaulted in this scenario (#14958 + #14858). Fixes include: "Fix ubus route src mask printing" and "Disable netlink auto ack" (thanks to Hans Dedecker) SVN-Revision: 39586
-
Imre Kaloz authored
Signed-off-by:Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 39584
-
- Feb 13, 2014
-
-
Jo-Philipp Wich authored
The mtdpartsize macro triggers shell errors on various Linux distributions when the partname argument $(1) does not appear within the partmap $(2). Change the sed pattern to only emit anything if a successful substitution occured and only evaluate the arithmetic expression if something was printed by the sed program. Signed-off-by:Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 39583
-
Imre Kaloz authored
Signed-off-by: -
Imre Kaloz authored
Signed-off-by: -
Imre Kaloz authored
Signed-off-by:
-
- Feb 12, 2014
-
-
Imre Kaloz authored
Signed-off-by: -
Imre Kaloz authored
Signed-off-by: -
Imre Kaloz authored
Signed-off-by: -
Imre Kaloz authored
Signed-off-by: -
Steven Barth authored
SVN-Revision: 39575
-
Luka Perkov authored
Signed-off-by: -
Luka Perkov authored
Signed-off-by:
-
- Feb 11, 2014
-
-
Felix Fietkau authored
Signed-off-by:Felix Fietkau <nbd@openwrt.org> SVN-Revision: 39572
-
Felix Fietkau authored
Signed-off-by: -
Felix Fietkau authored
Signed-off-by: -
Luka Perkov authored
Signed-off-by:Seif Mazareeb <seif.mazareeb@gmail.com> SVN-Revision: 39569
-
Luka Perkov authored
This Armada XP GP board from Marvell comes with: * 2GB DDR3 DIMM * 1GB NAND flash (8-bit interface) * 16MB NOR flash (16-bot interrface) * 16MB SPI flash * SDIO module * 3 PCIe * 1 SATA link * 2 USB EHCI * 1 internal SSD * 4 Ethernet Gigabit * 1 RS232 port over USB Signed-off-by: -
Luka Perkov authored
The config-3.10 doesn't specify the configuration of the backported PCI features, and the Marvell EBU Device Bus Controller, this will prevent a clean compile. This patch enables these features to archive a clean compile without having to specify the state of these configuration after starting to compile. Signed-off-by: -
Luka Perkov authored
This is a backport of the patches accepted to the Linux mainline related to mvebu SoC (Armada XP and Armada 370) between Linux v3.12, and Linux v3.13. This work mainly covers: * Finishes work for sharing the pxa nand driver(drivers/mtd/nand/pxa3xx_nand.c) between the PXA family, and the Armada family. * timer initialization update, and access function for the Armada family. * Generic IRQ handling backporting. * Some bug fixes. Signed-off-by: -
Luka Perkov authored
This is a backport of the patches accepted to the Linux mainline related to mvebu SoC (Armada XP and Armada 370) between Linux v3.11, and Linux v3.12. This work mainly covers: * Ground work for sharing the pxa nand driver(drivers/mtd/nand/pxa3xx_nand.c) between the PXA family,and the Armada family. * Further updates to the mvebu MBus. * Work and ground work for enabling MSI on the Armada family. * some phy / mdio bus initialization related work. * Device tree binding documentation update. Signed-off-by: -
Luka Perkov authored
This is a backport of the patches accepted to the Linux mainline related to mvebu SoC (Armada XP and Armada 370) between Linux v3.10, and Linux v3.11. This work mainly covers: * Enabling USB storage, and PCI to mvebu_defconfig. * Add support for NOR flash. * Some PCI device tree related updates, and bus parsing. * Adding Armada XP & 370 PCI driver, and update some clock gating specifics. * Introduce Marvell EBU Device Bus driver. * Enaling USB in the armada*.dts. * Enabling, and updating the mvebu-mbus. * Some SATA and Ethernet related fixes. Signed-off-by:
-
- Feb 10, 2014
-
-
Hauke Mehrtens authored
phy-generic.ko was renamed and moved from kernel version to version. kernel <= 3.9: nop-usb-xceiv.ko kernel >= 3.10 && <= 3.11: phy-nop.ko kernel >= 3.12: phy-generic.ko Signed-off-by:Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 39563
-
Hauke Mehrtens authored
smsc95xx.ko depends on crc16.ko on kernel >= 3.8 There was an additional kmod-usb-net-smsc95xx definition in the mxs target code which conflicted with the one in the common area. Signed-off-by: -
Imre Kaloz authored
Signed-off-by: -
Imre Kaloz authored
Signed-off-by: -
Imre Kaloz authored
Signed-off-by: -
Imre Kaloz authored
Signed-off-by:
-
