remove DIST and add EXTRAVERSION, discussed with mbm. fixed dirclean target for linksys-stuff

SVN-Revision: 279

openwrt/Makefile

@@ -128,11 +128,11 @@ source: $(TARGETS_SOURCE)
 #############################################################
 clean: 
 	rm -rf $(TARGET_DIR) $(IMAGE).*
-	$(MAKE) $(DIST)-image-clean
+	$(MAKE) openwrt-image-clean
 
 dirclean: $(TARGETS_DIRCLEAN)
 	rm -rf $(TARGET_DIR) $(IMAGE).*
-	$(MAKE) $(DIST)-image-clean
+	$(MAKE) openwrt-image-dirclean
 
 distclean: clean
 	rm -rf $(DL_DIR) $(BUILD_DIR) $(TOOL_BUILD_DIR) 

openwrt/package/config/mconf.c

@@ -705,6 +705,7 @@ int main(int ac, char **av)
 		conf_write(NULL);
 		printf("\n\n"
 			"*** End of Buildroot configuration.\n"
+			"*** After changing root fs, use make linux-dirclean.\n"
 			"*** Check the top-level Makefile for additional configuration options.\n\n");
 	} else
 		printf("\n\nYour Buildroot configuration changes were NOT saved.\n\n");

openwrt/package/openwrt/openwrt.mk

@@ -62,7 +62,7 @@ linksys-nvram-clean:
 	-$(MAKE) -C $(LINKSYS_NVRAM_BUILD_DIR) clean
 
 linksys-nvram-dirclean:
-	rm -rf $(LINKSYS_NVRAM_BUILD_DIR)
+	rm -rf $(LINKSYS_NVRAM_DIR)
 
 # wlconf tool extracted from linksys firmware GPL sourcetree
 # WRT54GS_3_37_2_1109_US
@@ -94,7 +94,7 @@ linksys-wlconf-clean:
 	-$(MAKE) -C $(LINKSYS_WLCONF_BUILD_DIR) clean
 
 linksys-wlconf-dirclean:
-	rm -rf $(LINKSYS_WLCONF_BUILD_DIR)
+	rm -rf $(LINKSYS_WLCONF_DIR)
 
 # mtd tool
 OPENWRT_MTD_SOURCE=package/openwrt/mtd.c
@@ -144,5 +144,9 @@ openwrt-addpattern: $(OPENWRT_ADDPATTERN_TARGET)
 openwrt-addpattern-clean: 
 	rm $(OPENWRT_ADDPATTERN_TARGET)
 
-openwrt:	linksys-shared linksys-nvram linksys-wlconf openwrt-mtd openwrt-trx openwrt-addpattern
+linksys:	linksys-shared linksys-nvram linksys-wlconf
+
+openwrt:	linksys openwrt-mtd openwrt-trx openwrt-addpattern openwrt-jffs2root
+
+openwrt-dirclean: linksys-shared-dirclean linksys-nvram-dirclean linksys-wlconf-dirclean
 

openwrt/target/Makefile.in

 # Default target skeleton stuff, may be overridden
-DIST=openwrt
+EXTRAVERSION=
 TARGET_SKELETON=target/default/skel.tar.gz
 TARGET_SKEL_DIR=target/default/target_skeleton
 
@@ -10,16 +10,20 @@ JFFS2FLAGS+=-a 131072
 endif
 
 
-$(DIST)-linux.trx: openwrt-trx
-	PATH=$(TARGET_PATH) trx -o $(DIST)-linux.trx $(LINUX_DIR)/$(LINUX_BINLOC) $(JFFS2FLAGS) $(IMAGE).$(ROOTFS)
+openwrt-linux.trx: openwrt-trx
+	PATH=$(TARGET_PATH) trx -o openwrt-linux$(EXTRAVERSION).trx \
+	 $(LINUX_DIR)/$(LINUX_BINLOC) $(JFFS2FLAGS) $(IMAGE).$(ROOTFS)
 
-$(DIST)-gs-code.bin: openwrt-addpattern $(DIST)-linux.trx
-	PATH=$(TARGET_PATH) addpattern -2 -i  $(DIST)-linux.trx -o $(DIST)-gs-code.bin -g
+openwrt-gs-code.bin: openwrt-addpattern openwrt-linux.trx
+	PATH=$(TARGET_PATH) addpattern -2 -i  openwrt-linux$(EXTRAVERSION).trx \
+	-o openwrt-gs-code$(EXTRAVERSION).bin -g
 
-$(DIST)-g-code.bin: $(DIST)-gs-code.bin
-	sed -e "1s,^W54S,W54G," < $(DIST)-gs-code.bin > $(DIST)-g-code.bin
+openwrt-g-code.bin: openwrt-gs-code.bin
+	sed -e "1s,^W54S,W54G," < openwrt-gs-code$(EXTRAVERSION).bin > openwrt-g-code$(EXTRAVERSION).bin
 
-openwrt-image:	openwrt $(DIST)-g-code.bin
+openwrt-image:	openwrt openwrt-g-code.bin
 
-$(DIST)-image-clean:
-	@-rm $(DIST)-* 2>/dev/null
+openwrt-image-clean: 
+	@-rm openwrt-* 2>/dev/null
+
+openwrt-image-dirclean: openwrt-dirclean