Skip to content
Snippets Groups Projects
  • Alberto Bursi's avatar
    4383c13a
    kirkwood: add ZyXEL NSA325 device · 4383c13a
    Alberto Bursi authored
    
    This patch add ZyXEL NSA325 2-Bay Media Server
    
    The ZyXEL NSA325 device is a Kirkwood based NAS:
    
    - SoC: Marvell 88F6702 1600Mhz
    - SDRAM memory: 512MB DDR2 400Mhz
    - Gigabit ethernet: Marvell Alaska
    - Flash memory: 128MB
    - 1 Power button
    - 1 Power LED (blue)
    - 5 Status LED (green/red)
    - 1 Copy/Sync button
    - 1 Reset button
    - 2 SATA II ports (internal)
    - 2 USB 2.0 ports (back)
    - 1 USB 3.0 port (front)
    - Fan (fixed speed)
    - hardware watchdog in a mcu
    
    Basically a bigger, more powerful version of NSA310,
    installation is the same as they share the same flash layout.
    
    A notable difference is that there is a hardware watchdog
    in a mcu on the board, which is disabled by default in the LEDE u-boot.
    The watchdog is also disabled with a GPIO activation through
    raw register change when kwbooting or it would reset the board before
    the new uboot was transferred.
    
    Signed-off-by: default avatarAlberto Bursi <alberto.bursi@outlook.it>
    Signed-off-by: Felix Fietkau <nbd@nbd.name> [remove dead code]
    4383c13a
    History
    kirkwood: add ZyXEL NSA325 device
    Alberto Bursi authored
    
    This patch add ZyXEL NSA325 2-Bay Media Server
    
    The ZyXEL NSA325 device is a Kirkwood based NAS:
    
    - SoC: Marvell 88F6702 1600Mhz
    - SDRAM memory: 512MB DDR2 400Mhz
    - Gigabit ethernet: Marvell Alaska
    - Flash memory: 128MB
    - 1 Power button
    - 1 Power LED (blue)
    - 5 Status LED (green/red)
    - 1 Copy/Sync button
    - 1 Reset button
    - 2 SATA II ports (internal)
    - 2 USB 2.0 ports (back)
    - 1 USB 3.0 port (front)
    - Fan (fixed speed)
    - hardware watchdog in a mcu
    
    Basically a bigger, more powerful version of NSA310,
    installation is the same as they share the same flash layout.
    
    A notable difference is that there is a hardware watchdog
    in a mcu on the board, which is disabled by default in the LEDE u-boot.
    The watchdog is also disabled with a GPIO activation through
    raw register change when kwbooting or it would reset the board before
    the new uboot was transferred.
    
    Signed-off-by: default avatarAlberto Bursi <alberto.bursi@outlook.it>
    Signed-off-by: Felix Fietkau <nbd@nbd.name> [remove dead code]