Skip to content
Snippets Groups Projects
  • Andrew Yong's avatar
    3f31029b
    ramips: add support for VoCore2 · 3f31029b
    Andrew Yong authored
    
    This patch adds support for the VoCore VoCore2 and its complementary
    "ultimate" dock.
    
    Specifications:
    - SoC: MediaTek MT7628AN (580MHz, ramips)
    - RAM: 128MB DDR2 166MHz
    - Storage: 16MB NOR SPI flash onboard + microSD slot on dock
    - Wireless: Built into MT7628AN (mt76) with 1T1R firmware on VoCore2
                boards with onboard 1x chip antenna
    - Ethernet: 1x100M (port0) on dock, 1x100M (port2) on PCB header
    - Dock hardware:
      - USB 2.0 socket
      - MicroSD socket
      - 100Mbps Ethernet x1
      - 3.5mm headphone jack (TRRS) connected to Everest Semi ES8388 I2S
        DAC/ADC (support WIP)
      - Micro USB for power and console (UART2)
    
    Initial installation:
    - VoCore2 comes preinstalled with a fork of OpenWrt CC and AP on
      SSID "VoCore2"
    - Connect to VoCore2 by Ethernet or Wi-Fi
    - `ssh root@192.168.1.1` (password is "vocore")
    - scp/wget/etc. LEDE sysupgrade.bin to VoCore2
    - `sysupgrade -n <your image>.bin` (don't keep old config, as the
      original firmware uses Ralink SDK Wi-Fi drivers and not
      mt76+mac80211)
    - after sysupgrade completes, Wi-Fi will be disabled by default so use
      Ethernet or the micro USB console to configure Wi-Fi again
    
    Signed-off-by: default avatarAndrew Yong <me@ndoo.sg>
    3f31029b
    History
    ramips: add support for VoCore2
    Andrew Yong authored
    
    This patch adds support for the VoCore VoCore2 and its complementary
    "ultimate" dock.
    
    Specifications:
    - SoC: MediaTek MT7628AN (580MHz, ramips)
    - RAM: 128MB DDR2 166MHz
    - Storage: 16MB NOR SPI flash onboard + microSD slot on dock
    - Wireless: Built into MT7628AN (mt76) with 1T1R firmware on VoCore2
                boards with onboard 1x chip antenna
    - Ethernet: 1x100M (port0) on dock, 1x100M (port2) on PCB header
    - Dock hardware:
      - USB 2.0 socket
      - MicroSD socket
      - 100Mbps Ethernet x1
      - 3.5mm headphone jack (TRRS) connected to Everest Semi ES8388 I2S
        DAC/ADC (support WIP)
      - Micro USB for power and console (UART2)
    
    Initial installation:
    - VoCore2 comes preinstalled with a fork of OpenWrt CC and AP on
      SSID "VoCore2"
    - Connect to VoCore2 by Ethernet or Wi-Fi
    - `ssh root@192.168.1.1` (password is "vocore")
    - scp/wget/etc. LEDE sysupgrade.bin to VoCore2
    - `sysupgrade -n <your image>.bin` (don't keep old config, as the
      original firmware uses Ralink SDK Wi-Fi drivers and not
      mt76+mac80211)
    - after sysupgrade completes, Wi-Fi will be disabled by default so use
      Ethernet or the micro USB console to configure Wi-Fi again
    
    Signed-off-by: default avatarAndrew Yong <me@ndoo.sg>