From ecba34a3eed3dc747b5e2588dc138dee178ebed2 Mon Sep 17 00:00:00 2001
From: Imre Kaloz <kaloz@openwrt.org>
Date: Mon, 11 Aug 2014 11:44:51 +0000
Subject: [PATCH] add support for the NC-LINK SMART-300
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 42130
---
target/linux/ar71xx/base-files/etc/diag.sh | 3 +
.../base-files/etc/uci-defaults/01_leds | 9 ++
.../base-files/etc/uci-defaults/02_network | 1 +
target/linux/ar71xx/base-files/lib/ar71xx.sh | 6 +
.../lib/preinit/05_set_preinit_iface_ar71xx | 1 +
.../ar71xx/base-files/lib/upgrade/platform.sh | 1 +
target/linux/ar71xx/config-3.10 | 1 +
target/linux/ar71xx/config-3.14 | 1 +
.../files/arch/mips/ath79/mach-smart-300.c | 135 ++++++++++++++++++
.../linux/ar71xx/generic/profiles/nclink.mk | 15 ++
target/linux/ar71xx/image/Makefile | 2 +
...725-MIPS-ath79-add-smart-300-support.patch | 38 +++++
...725-MIPS-ath79-add-smart-300-support.patch | 38 +++++
13 files changed, 251 insertions(+)
create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-smart-300.c
create mode 100644 target/linux/ar71xx/generic/profiles/nclink.mk
create mode 100644 target/linux/ar71xx/patches-3.10/725-MIPS-ath79-add-smart-300-support.patch
create mode 100644 target/linux/ar71xx/patches-3.14/725-MIPS-ath79-add-smart-300-support.patch
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 2984777d9d..1864b11a27 100755
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -160,6 +160,9 @@ get_status_led() {
rw2458n)
status_led="rw2458n:green:d3"
;;
+ smart-300)
+ status_led="nc-link:green:system"
+ ;;
oolite)
status_led="oolite:red:system"
;;
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
index a93b5faeed..d104f40786 100755
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
@@ -190,6 +190,15 @@ om5p)
ucidef_set_led_netdev "port2" "port2" "om5p:blue:lan" "eth1"
;;
+smart-300)
+ ucidef_set_led_netdev "wan" "WAN" "nc-link:green:wan" "eth0"
+ ucidef_set_led_switch "lan1" "LAN1" "nc-link:green:lan1" "switch0" "0x04"
+ ucidef_set_led_switch "lan2" "LAN2" "nc-link:green:lan2" "switch0" "0x08"
+ ucidef_set_led_switch "lan3" "LAN3" "nc-link:green:lan3" "switch0" "0x10"
+ ucidef_set_led_switch "lan4" "LAN4" "nc-link:green:lan4" "switch0" "0x02"
+ ucidef_set_led_wlan "wlan" "WLAN" "nc-link:green:wlan" "phy0tpt"
+ ;;
+
tew-712br)
ucidef_set_led_netdev "wan" "WAN" "trendnet:green:wan" "eth1"
ucidef_set_led_switch "lan1" "LAN1" "trendnet:green:lan1" "switch0" "0x02"
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
index c9ee86769a..3b4b330be4 100755
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
@@ -199,6 +199,7 @@ tl-wr941nd)
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
;;
+smart-300 | \
tl-mr3420-v2 |\
tl-wr841n-v8 |\
tl-wr842n-v2 |\
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index a067604df9..80a607c2dd 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -211,6 +211,9 @@ tplink_board_detect() {
"453000"*)
model="MERCURY MW4530R"
;;
+ "934100"*)
+ model="NC-LINK SMART-300"
+ ;;
*)
hwver=""
;;
@@ -514,6 +517,9 @@ ar71xx_board_detect() {
*RW2458N)
name="rw2458n"
;;
+ *"SMART-300")
+ name="smart-300"
+ ;;
*TEW-632BRP)
name="tew-632brp"
;;
diff --git a/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx b/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx
index 10651fccd4..a9a8794c77 100644
--- a/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx
+++ b/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx
@@ -27,6 +27,7 @@ set_preinit_iface() {
rb-450g |\
routerstation |\
routerstation-pro |\
+ smart-300 |\
tl-mr3420-v2 |\
tl-wdr4900-v2 |\
tl-wr1043nd-v2 |\
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index ced42ed044..b5b28736bc 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -257,6 +257,7 @@ platform_check_image() {
el-mini | \
gl-inet | \
oolite | \
+ smart-300 | \
tl-mr10u | \
tl-mr11u | \
tl-mr13u | \
diff --git a/target/linux/ar71xx/config-3.10 b/target/linux/ar71xx/config-3.10
index 8e33176aad..9a8378a0cb 100644
--- a/target/linux/ar71xx/config-3.10
+++ b/target/linux/ar71xx/config-3.10
@@ -79,6 +79,7 @@ CONFIG_ATH79_MACH_PB92=y
# CONFIG_ATH79_MACH_RB95X is not set
# CONFIG_ATH79_MACH_RBSXTLITE is not set
CONFIG_ATH79_MACH_RW2458N=y
+CONFIG_ATH79_MACH_SMART_300=y
CONFIG_ATH79_MACH_TEW_632BRP=y
CONFIG_ATH79_MACH_TEW_673GRU=y
CONFIG_ATH79_MACH_TEW_712BR=y
diff --git a/target/linux/ar71xx/config-3.14 b/target/linux/ar71xx/config-3.14
index 82f2af74bb..c642913cda 100644
--- a/target/linux/ar71xx/config-3.14
+++ b/target/linux/ar71xx/config-3.14
@@ -80,6 +80,7 @@ CONFIG_ATH79_MACH_PB92=y
# CONFIG_ATH79_MACH_RB95X is not set
# CONFIG_ATH79_MACH_RBSXTLITE is not set
CONFIG_ATH79_MACH_RW2458N=y
+CONFIG_ATH79_MACH_SMART_300=y
CONFIG_ATH79_MACH_TEW_632BRP=y
CONFIG_ATH79_MACH_TEW_673GRU=y
CONFIG_ATH79_MACH_TEW_712BR=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-smart-300.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-smart-300.c
new file mode 100644
index 0000000000..2520e960d3
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-smart-300.c
@@ -0,0 +1,135 @@
+/*
+ * NC-LINK SMART-300 board support
+ *
+ * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2014 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/ag71xx_platform.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define SMART_300_GPIO_LED_WLAN 13
+#define SMART_300_GPIO_LED_WAN 18
+#define SMART_300_GPIO_LED_LAN4 19
+#define SMART_300_GPIO_LED_LAN3 12
+#define SMART_300_GPIO_LED_LAN2 21
+#define SMART_300_GPIO_LED_LAN1 20
+#define SMART_300_GPIO_LED_SYSTEM 15
+#define SMART_300_GPIO_LED_POWER 14
+
+#define SMART_300_GPIO_BTN_RESET 17
+#define SMART_300_GPIO_SW_RFKILL 16
+
+#define SMART_300_KEYS_POLL_INTERVAL 20 /* msecs */
+#define SMART_300_KEYS_DEBOUNCE_INTERVAL (3 * SMART_300_KEYS_POLL_INTERVAL)
+
+#define SMART_300_GPIO_MASK 0x007fffff
+
+static const char *smart_300_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data smart_300_flash_data = {
+ .part_probes = smart_300_part_probes,
+};
+
+static struct gpio_led smart_300_leds_gpio[] __initdata = {
+ {
+ .name = "nc-link:green:lan1",
+ .gpio = SMART_300_GPIO_LED_LAN1,
+ .active_low = 1,
+ }, {
+ .name = "nc-link:green:lan2",
+ .gpio = SMART_300_GPIO_LED_LAN2,
+ .active_low = 1,
+ }, {
+ .name = "nc-link:green:lan3",
+ .gpio = SMART_300_GPIO_LED_LAN3,
+ .active_low = 1,
+ }, {
+ .name = "nc-link:green:lan4",
+ .gpio = SMART_300_GPIO_LED_LAN4,
+ .active_low = 1,
+ }, {
+ .name = "nc-link:green:system",
+ .gpio = SMART_300_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ }, {
+ .name = "nc-link:green:wan",
+ .gpio = SMART_300_GPIO_LED_WAN,
+ .active_low = 1,
+ }, {
+ .name = "nc-link:green:wlan",
+ .gpio = SMART_300_GPIO_LED_WLAN,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button smart_300_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = SMART_300_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = SMART_300_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+static void __init smart_300_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(smart_300_leds_gpio),
+ smart_300_leds_gpio);
+
+ ath79_register_gpio_keys_polled(1, SMART_300_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(smart_300_gpio_keys),
+ smart_300_gpio_keys);
+
+ ath79_register_m25p80(&smart_300_flash_data);
+
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE);
+
+ ath79_register_mdio(1, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, -1);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
+
+ /* GMAC0 is connected to the PHY0 of the internal switch */
+ ath79_switch_data.phy4_mii_en = 1;
+ ath79_switch_data.phy_poll_mask = BIT(4);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = BIT(4);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
+ ath79_register_eth(0);
+
+ /* GMAC1 is connected to the internal switch */
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_register_eth(1);
+
+ ath79_register_wmac(ee, mac);
+
+ gpio_request(SMART_300_GPIO_LED_POWER, "power");
+ gpio_direction_output(SMART_300_GPIO_LED_POWER, GPIOF_OUT_INIT_LOW);
+}
+
+MIPS_MACHINE(ATH79_MACH_SMART_300, "SMART-300", "NC-LINK SMART-300",
+ smart_300_setup);
diff --git a/target/linux/ar71xx/generic/profiles/nclink.mk b/target/linux/ar71xx/generic/profiles/nclink.mk
new file mode 100644
index 0000000000..04eb9ec5c0
--- /dev/null
+++ b/target/linux/ar71xx/generic/profiles/nclink.mk
@@ -0,0 +1,15 @@
+#
+# Copyright (C) 2014 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/SMART-300
+ NAME:=NC-LINK SMART-300
+endef
+
+define Profile/SMART-300/Description
+ Package set optimized for the NC-LINK SMART-300.
+endef
+$(eval $(call Profile,SMART-300))
diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
index 0acc73f1ac..ec69b0ba18 100644
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -1203,6 +1203,8 @@ $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWDR4310V1,tl-wdr4310-v1,TL-WDR4
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWDR4900V2,tl-wdr4900-v2,TL-WDR4900-v2,ttyS0,115200,0x49000002,1,8Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,MW4530RV1,mw4530r-v1,TL-WDR4300,ttyS0,115200,0x45300001,1,8Mlzma))
+$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,SMART-300,smart-300,SMART-300,ttyS0,115200,0x93410001,1,8Mlzma))
+
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,OOLITE,oolite,GS-OOLITE,ttyATH0,115200,0x3C000101,1,16Mlzma))
$(eval $(call SingleProfile,UAPPRO,64k,UAPPRO,ubnt-uap-pro,UAP-PRO,ttyS0,115200,BZ,BZ,ar934x))
diff --git a/target/linux/ar71xx/patches-3.10/725-MIPS-ath79-add-smart-300-support.patch b/target/linux/ar71xx/patches-3.10/725-MIPS-ath79-add-smart-300-support.patch
new file mode 100644
index 0000000000..a96b2a4315
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/725-MIPS-ath79-add-smart-300-support.patch
@@ -0,0 +1,38 @@
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -103,6 +103,7 @@ enum ath79_mach_type {
+ ATH79_MACH_RB_SXTLITE2ND, /* Mikrotik RouterBOARD SXT Lite 2nD */
+ ATH79_MACH_RB_SXTLITE5ND, /* Mikrotik RouterBOARD SXT Lite 5nD */
+ ATH79_MACH_RW2458N, /* Redwave RW2458N */
++ ATH79_MACH_SMART_300, /* NC-LINK SMART-300 */
+ ATH79_MACH_TEW_632BRP, /* TRENDnet TEW-632BRP */
+ ATH79_MACH_TEW_673GRU, /* TRENDnet TEW-673GRU */
+ ATH79_MACH_TEW_712BR, /* TRENDnet TEW-712BR */
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -518,6 +518,15 @@ config ATH79_MACH_RBSXTLITE
+ select ATH79_DEV_WMAC
+ select ATH79_ROUTERBOOT
+
++config ATH79_MACH_SMART_300
++ bool "NC-LINK SMART-300 board support"
++ select SOC_AR934X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_WMAC
++
+ config ATH79_MACH_WNDAP360
+ bool "NETGEAR WNDAP360 board support"
+ select SOC_AR71XX
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -92,6 +92,7 @@ obj-$(CONFIG_ATH79_MACH_RB95X) += mach-
+ obj-$(CONFIG_ATH79_MACH_RB2011) += mach-rb2011.o
+ obj-$(CONFIG_ATH79_MACH_RBSXTLITE) += mach-rbsxtlite.o
+ obj-$(CONFIG_ATH79_MACH_RW2458N) += mach-rw2458n.o
++obj-$(CONFIG_ATH79_MACH_SMART_300) += mach-smart-300.o
+ obj-$(CONFIG_ATH79_MACH_TEW_632BRP) += mach-tew-632brp.o
+ obj-$(CONFIG_ATH79_MACH_TEW_673GRU) += mach-tew-673gru.o
+ obj-$(CONFIG_ATH79_MACH_TEW_712BR) += mach-tew-712br.o
diff --git a/target/linux/ar71xx/patches-3.14/725-MIPS-ath79-add-smart-300-support.patch b/target/linux/ar71xx/patches-3.14/725-MIPS-ath79-add-smart-300-support.patch
new file mode 100644
index 0000000000..a96b2a4315
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.14/725-MIPS-ath79-add-smart-300-support.patch
@@ -0,0 +1,38 @@
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -103,6 +103,7 @@ enum ath79_mach_type {
+ ATH79_MACH_RB_SXTLITE2ND, /* Mikrotik RouterBOARD SXT Lite 2nD */
+ ATH79_MACH_RB_SXTLITE5ND, /* Mikrotik RouterBOARD SXT Lite 5nD */
+ ATH79_MACH_RW2458N, /* Redwave RW2458N */
++ ATH79_MACH_SMART_300, /* NC-LINK SMART-300 */
+ ATH79_MACH_TEW_632BRP, /* TRENDnet TEW-632BRP */
+ ATH79_MACH_TEW_673GRU, /* TRENDnet TEW-673GRU */
+ ATH79_MACH_TEW_712BR, /* TRENDnet TEW-712BR */
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -518,6 +518,15 @@ config ATH79_MACH_RBSXTLITE
+ select ATH79_DEV_WMAC
+ select ATH79_ROUTERBOOT
+
++config ATH79_MACH_SMART_300
++ bool "NC-LINK SMART-300 board support"
++ select SOC_AR934X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_WMAC
++
+ config ATH79_MACH_WNDAP360
+ bool "NETGEAR WNDAP360 board support"
+ select SOC_AR71XX
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -92,6 +92,7 @@ obj-$(CONFIG_ATH79_MACH_RB95X) += mach-
+ obj-$(CONFIG_ATH79_MACH_RB2011) += mach-rb2011.o
+ obj-$(CONFIG_ATH79_MACH_RBSXTLITE) += mach-rbsxtlite.o
+ obj-$(CONFIG_ATH79_MACH_RW2458N) += mach-rw2458n.o
++obj-$(CONFIG_ATH79_MACH_SMART_300) += mach-smart-300.o
+ obj-$(CONFIG_ATH79_MACH_TEW_632BRP) += mach-tew-632brp.o
+ obj-$(CONFIG_ATH79_MACH_TEW_673GRU) += mach-tew-673gru.o
+ obj-$(CONFIG_ATH79_MACH_TEW_712BR) += mach-tew-712br.o
--
GitLab