diff --git a/target/linux/imx6/patches-3.10/0030-PCI-imx6-remove-outbound-io-mem-ATU-region-mapping.patch b/target/linux/imx6/patches-3.10/0030-PCI-imx6-remove-outbound-io-mem-ATU-region-mapping.patch
new file mode 100644
index 0000000000000000000000000000000000000000..bc9ad3c7a756ac2dcb644f740ef82ce744ed4947
--- /dev/null
+++ b/target/linux/imx6/patches-3.10/0030-PCI-imx6-remove-outbound-io-mem-ATU-region-mapping.patch
@@ -0,0 +1,106 @@
+From 93d2b52fe73294d59bbce3a6d4da031647b1f3b2 Mon Sep 17 00:00:00 2001
+From: Tim Harvey <tharvey@gateworks.com>
+Date: Tue, 22 Oct 2013 15:56:40 -0700
+Subject: [PATCH] PCI: imx6: remove outbound io/mem ATU region mapping
+
+The IMX6 iATU is used for address translation between the AXI bus
+address space and PCI address space. This is used for type0 and type1
+config cycles but is not necessary for outbound io/mem regions.
+
+This patch removes the calls that inappropriately re-configures the ATU
+viewport for outbound memory and IO after config cycles and removes them
+altogether as they are not necessary.
+
+This resolves issues with PCI devices behind switches and has been tested with
+a Gige device behind a PLX PEX860x switch.
+
+Signed-off-by: Tim Harvey <tharvey@gateworks.com>
+---
+ drivers/pci/host/pcie-designware.c | 41 +++---------------------------------
+ 1 file changed, 3 insertions(+), 38 deletions(-)
+
+--- a/drivers/pci/host/pcie-designware.c
++++ b/drivers/pci/host/pcie-designware.c
+@@ -43,7 +43,6 @@
+ #define PCIE_ATU_VIEWPORT 0x900
+ #define PCIE_ATU_REGION_INBOUND (0x1 << 31)
+ #define PCIE_ATU_REGION_OUTBOUND (0x0 << 31)
+-#define PCIE_ATU_REGION_INDEX1 (0x1 << 0)
+ #define PCIE_ATU_REGION_INDEX0 (0x0 << 0)
+ #define PCIE_ATU_CR1 0x904
+ #define PCIE_ATU_TYPE_MEM (0x0 << 0)
+@@ -264,8 +263,8 @@ static void dw_pcie_prog_viewport_cfg0(s
+
+ static void dw_pcie_prog_viewport_cfg1(struct pcie_port *pp, u32 busdev)
+ {
+- /* Program viewport 1 : OUTBOUND : CFG1 */
+- dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1,
++ /* Program viewport 0 : OUTBOUND : CFG1 */
++ dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0,
+ PCIE_ATU_VIEWPORT);
+ dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_CFG1, PCIE_ATU_CR1);
+ dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
+@@ -275,38 +274,8 @@ static void dw_pcie_prog_viewport_cfg1(s
+ PCIE_ATU_LIMIT);
+ dw_pcie_writel_rc(pp, busdev, PCIE_ATU_LOWER_TARGET);
+ dw_pcie_writel_rc(pp, 0, PCIE_ATU_UPPER_TARGET);
+-}
+-
+-static void dw_pcie_prog_viewport_mem_outbound(struct pcie_port *pp)
+-{
+- /* Program viewport 0 : OUTBOUND : MEM */
+- dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0,
+- PCIE_ATU_VIEWPORT);
+- dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_MEM, PCIE_ATU_CR1);
+- dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
+- dw_pcie_writel_rc(pp, pp->mem_base, PCIE_ATU_LOWER_BASE);
+- dw_pcie_writel_rc(pp, (pp->mem_base >> 32), PCIE_ATU_UPPER_BASE);
+- dw_pcie_writel_rc(pp, pp->mem_base + pp->config.mem_size - 1,
+- PCIE_ATU_LIMIT);
+- dw_pcie_writel_rc(pp, pp->config.mem_bus_addr, PCIE_ATU_LOWER_TARGET);
+- dw_pcie_writel_rc(pp, upper_32_bits(pp->config.mem_bus_addr),
+- PCIE_ATU_UPPER_TARGET);
+-}
+-
+-static void dw_pcie_prog_viewport_io_outbound(struct pcie_port *pp)
+-{
+- /* Program viewport 1 : OUTBOUND : IO */
+- dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1,
+- PCIE_ATU_VIEWPORT);
+- dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_IO, PCIE_ATU_CR1);
++ dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_CFG1, PCIE_ATU_CR1);
+ dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
+- dw_pcie_writel_rc(pp, pp->io_base, PCIE_ATU_LOWER_BASE);
+- dw_pcie_writel_rc(pp, (pp->io_base >> 32), PCIE_ATU_UPPER_BASE);
+- dw_pcie_writel_rc(pp, pp->io_base + pp->config.io_size - 1,
+- PCIE_ATU_LIMIT);
+- dw_pcie_writel_rc(pp, pp->config.io_bus_addr, PCIE_ATU_LOWER_TARGET);
+- dw_pcie_writel_rc(pp, upper_32_bits(pp->config.io_bus_addr),
+- PCIE_ATU_UPPER_TARGET);
+ }
+
+ static int dw_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus,
+@@ -322,11 +291,9 @@ static int dw_pcie_rd_other_conf(struct
+ if (bus->parent->number == pp->root_bus_nr) {
+ dw_pcie_prog_viewport_cfg0(pp, busdev);
+ ret = cfg_read(pp->va_cfg0_base + address, where, size, val);
+- dw_pcie_prog_viewport_mem_outbound(pp);
+ } else {
+ dw_pcie_prog_viewport_cfg1(pp, busdev);
+ ret = cfg_read(pp->va_cfg1_base + address, where, size, val);
+- dw_pcie_prog_viewport_io_outbound(pp);
+ }
+
+ return ret;
+@@ -345,11 +312,9 @@ static int dw_pcie_wr_other_conf(struct
+ if (bus->parent->number == pp->root_bus_nr) {
+ dw_pcie_prog_viewport_cfg0(pp, busdev);
+ ret = cfg_write(pp->va_cfg0_base + address, where, size, val);
+- dw_pcie_prog_viewport_mem_outbound(pp);
+ } else {
+ dw_pcie_prog_viewport_cfg1(pp, busdev);
+ ret = cfg_write(pp->va_cfg1_base + address, where, size, val);
+- dw_pcie_prog_viewport_io_outbound(pp);
+ }
+
+ return ret;
diff --git a/target/linux/imx6/patches-3.10/0031-PCI-imx6-init-must-be-early.patch b/target/linux/imx6/patches-3.10/0031-PCI-imx6-init-must-be-early.patch
new file mode 100644
index 0000000000000000000000000000000000000000..0546d9c8fa6f35a5c8fe69aa43dacdc5702e5259
--- /dev/null
+++ b/target/linux/imx6/patches-3.10/0031-PCI-imx6-init-must-be-early.patch
@@ -0,0 +1,24 @@
+From 8c8c877d8490c9d51210ee9e90d5f4d740f115c9 Mon Sep 17 00:00:00 2001
+From: Tim Harvey <tharvey@gateworks.com>
+Date: Thu, 17 Oct 2013 15:55:47 -0700
+Subject: [PATCH 3/5] PCI: imx6: init must be early
+
+If driver init is not early the pcie port driver gets initalized
+first and interrupts are not configured for the imx6 pcie driver.
+
+Signed-off-by: Tim Harvey <tharvey@gateworks.com>
+---
+ drivers/pci/host/pci-imx6.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/pci/host/pci-imx6.c
++++ b/drivers/pci/host/pci-imx6.c
+@@ -568,7 +568,7 @@ static int __init imx6_pcie_init(void)
+ {
+ return platform_driver_probe(&imx6_pcie_driver, imx6_pcie_probe);
+ }
+-module_init(imx6_pcie_init);
++fs_initcall(imx6_pcie_init);
+
+ MODULE_AUTHOR("Sean Cross <xobs@kosagi.com>");
+ MODULE_DESCRIPTION("Freescale i.MX6 PCIe host controller driver");
diff --git a/target/linux/imx6/patches-3.10/0032-PCI-imx6-fix-imprecise-abort-handler.patch b/target/linux/imx6/patches-3.10/0032-PCI-imx6-fix-imprecise-abort-handler.patch
new file mode 100644
index 0000000000000000000000000000000000000000..5cef4114f4c7db8cb928d6a96c67f6f1a65b52f9
--- /dev/null
+++ b/target/linux/imx6/patches-3.10/0032-PCI-imx6-fix-imprecise-abort-handler.patch
@@ -0,0 +1,36 @@
+From 8590081d5328fe59d4f72aaadafb47fb91d8dc7c Mon Sep 17 00:00:00 2001
+From: Tim Harvey <tharvey@gateworks.com>
+Date: Thu, 17 Oct 2013 15:52:16 -0700
+Subject: [PATCH] PCI: imx6: fix imprecise abort handler
+
+An imprecise abort is triggered when a port behind a switch is accessed
+and no device is present. At enumeration, imprecise aborts are not enabled
+thus this ends up getting deferred until the kernel has completed init. At
+that point we must not adjust PC - the handler must do nothing, but a handler
+must exist.
+
+This fixes random crashes that occur right after freeing init.
+This is against linux-pci/host-imx6.
+
+Acked-by: Marek Vasut <marex@denx.de>
+Tested-by: Marek Vasut <marex@denx.de>
+Signed-off-by: Tim Harvey <tharvey@gateworks.com>
+---
+ drivers/pci/host/pci-imx6.c | 6 ------
+ 1 file changed, 6 deletions(-)
+
+--- a/drivers/pci/host/pci-imx6.c
++++ b/drivers/pci/host/pci-imx6.c
+@@ -200,12 +200,6 @@ static int pcie_phy_write(void __iomem *
+ static int imx6q_pcie_abort_handler(unsigned long addr,
+ unsigned int fsr, struct pt_regs *regs)
+ {
+- /*
+- * If it was an imprecise abort, then we need to correct the
+- * return address to be _after_ the instruction.
+- */
+- if (fsr & (1 << 10))
+- regs->ARM_pc += 4;
+ return 0;
+ }
+
diff --git a/target/linux/imx6/patches-3.10/0033-PCI-imx6-increase-link-startup.patch b/target/linux/imx6/patches-3.10/0033-PCI-imx6-increase-link-startup.patch
new file mode 100644
index 0000000000000000000000000000000000000000..a94a16690851bdfc24884194a3975b8dbf2edeba
--- /dev/null
+++ b/target/linux/imx6/patches-3.10/0033-PCI-imx6-increase-link-startup.patch
@@ -0,0 +1,24 @@
+From 11e8d0ed8cc3b415767961555efc2885791a9391 Mon Sep 17 00:00:00 2001
+From: Tim Harvey <tharvey@gateworks.com>
+Date: Thu, 17 Oct 2013 15:57:28 -0700
+Subject: [PATCH 4/5] PCI: imx6: increase link startup
+
+An increase link startup delay is required when certain PCI switches are
+attached to the root complex.
+
+Signed-off-by: Tim Harvey <tharvey@gateworks.com>
+---
+ drivers/pci/host/pci-imx6.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/pci/host/pci-imx6.c
++++ b/drivers/pci/host/pci-imx6.c
+@@ -318,7 +318,7 @@ static void imx6_pcie_host_init(struct p
+ while (!dw_pcie_link_up(pp)) {
+ usleep_range(100, 1000);
+ count++;
+- if (count >= 10) {
++ if (count >= 200) {
+ dev_err(pp->dev, "phy link never came up\n");
+ dev_dbg(pp->dev,
+ "DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n",
diff --git a/target/linux/imx6/patches-3.10/0034-PCI-imx6-swizzle-interrupts.patch b/target/linux/imx6/patches-3.10/0034-PCI-imx6-swizzle-interrupts.patch
new file mode 100644
index 0000000000000000000000000000000000000000..425ba8a41ec98bdca477c710b830f09872671037
--- /dev/null
+++ b/target/linux/imx6/patches-3.10/0034-PCI-imx6-swizzle-interrupts.patch
@@ -0,0 +1,28 @@
+From 73a0e49b562da9b06e487fb8e051075543495be5 Mon Sep 17 00:00:00 2001
+From: Tim Harvey <tharvey@gateworks.com>
+Date: Thu, 17 Oct 2013 15:50:48 -0700
+Subject: [PATCH 1/5] PCI: imx6: swizzle interrupts
+
+
+Signed-off-by: Tim Harvey <tharvey@gateworks.com>
+---
+ drivers/pci/host/pcie-designware.c | 8 +++++++-
+ 1 file changed, 7 insertions(+), 1 deletion(-)
+
+--- a/drivers/pci/host/pcie-designware.c
++++ b/drivers/pci/host/pcie-designware.c
+@@ -676,7 +676,13 @@ int dw_pcie_map_irq(const struct pci_dev
+ {
+ struct pcie_port *pp = sys_to_pcie(dev->bus->sysdata);
+
+- return pp->irq;
++ switch (pin) {
++ case 1: return pp->irq;
++ case 2: return pp->irq - 1;
++ case 3: return pp->irq - 2;
++ case 4: return pp->irq - 3;
++ default: return -1;
++ }
+ }
+
+ static void dw_pcie_add_bus(struct pci_bus *bus)
diff --git a/target/linux/imx6/patches-3.10/010-pcie-backport-fixes.patch b/target/linux/imx6/patches-3.10/010-pcie-backport-fixes.patch
index 2aea7084c7238c40f92180e701e0b7e4fb230909..cb26ec83d463abe8d9e0347e0e272b57e12c0f99 100644
--- a/target/linux/imx6/patches-3.10/010-pcie-backport-fixes.patch
+++ b/target/linux/imx6/patches-3.10/010-pcie-backport-fixes.patch
@@ -26,3 +26,20 @@
+
+# PCI host controller drivers
+obj-y += host/
+--- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt
++++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
+@@ -208,10 +208,10 @@ clocks and IDs.
+ pll4_post_div 193
+ pll5_post_div 194
+ pll5_video_div 195
+- lvds1_sel 204
+- lvds2_sel 205
+- lvds1_gate 206
+- lvds2_gate 207
++ lvds1_sel 196
++ lvds2_sel 197
++ lvds1_gate 198
++ lvds2_gate 199
+
+ Examples:
+
diff --git a/target/linux/imx6/patches-3.10/011-pci-tweaks.patch b/target/linux/imx6/patches-3.10/011-pci-tweaks.patch
deleted file mode 100644
index eda007eb6d3b4b4d2b0d6c053ab0c6daa34ba0d4..0000000000000000000000000000000000000000
--- a/target/linux/imx6/patches-3.10/011-pci-tweaks.patch
+++ /dev/null
@@ -1,24 +0,0 @@
---- a/drivers/pci/host/pci-imx6.c
-+++ b/drivers/pci/host/pci-imx6.c
-@@ -200,12 +200,6 @@ static int pcie_phy_write(void __iomem *
- static int imx6q_pcie_abort_handler(unsigned long addr,
- unsigned int fsr, struct pt_regs *regs)
- {
-- /*
-- * If it was an imprecise abort, then we need to correct the
-- * return address to be _after_ the instruction.
-- */
-- if (fsr & (1 << 10))
-- regs->ARM_pc += 4;
- return 0;
- }
-
-@@ -322,7 +316,7 @@ static void imx6_pcie_host_init(struct p
- IMX6Q_GPR12_PCIE_CTL_2, 1 << 10);
-
- while (!dw_pcie_link_up(pp)) {
-- usleep_range(100, 1000);
-+ usleep_range(2000, 3000);
- count++;
- if (count >= 10) {
- dev_err(pp->dev, "phy link never came up\n");