From bc67bd229555f708717cd7647429f64b4c563a52 Mon Sep 17 00:00:00 2001
From: John Crispin <john@openwrt.org>
Date: Thu, 7 Aug 2014 14:41:19 +0000
Subject: [PATCH] ralink: add 3.14 support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42040
---
target/linux/ramips/mt7620a/config-3.14 | 184 +
target/linux/ramips/mt7620n/config-3.14 | 176 +
target/linux/ramips/mt7621/config-3.14 | 237 +
...001-MIPS-ralink-add-verbose-pmu-info.patch | 64 +
...a-helper-for-reading-the-ECO-version.patch | 27 +
...3-MIPS-ralink-add-rt_sysc_m32-helper.patch | 31 +
...-ralink-adds-a-bootrom-dumper-module.patch | 83 +
...IPS-ralink-add-illegal-access-driver.patch | 123 +
...nk-add-missing-clk_set_rate-to-clk.c.patch | 32 +
...-MIPS-ralink-add-support-for-MT7620n.patch | 73 +
...-ralink-allow-manual-memory-override.patch | 50 +
...link-define-the-wmac-clock-on-mt7620.patch | 25 +
...link-define-the-wmac-clock-on-rt3883.patch | 25 +
...11-MIPS-ralink-add-rt2880-wmac-clock.patch | 34 +
.../0012-MIPS-ralink-add-MT7621-support.patch | 751 +
...013-MIPS-ralink-add-MT7621-defconfig.patch | 217 +
...0014-MIPS-ralink-add-MT7621-dts-file.patch | 311 +
...015-MIPS-ralink-cleanup-early_printk.patch | 84 +
...6-MIPS-ralink-add-MT7621-pcie-driver.patch | 830 +
...e-to-enable-disable-the-cevt-r4k-irq.patch | 85 +
...S-ralink-workaround-DTB-memory-issue.patch | 29 +
...pseudo-pwm-led-trigger-based-on-time.patch | 306 +
.../0020-MIPS-ralink-update-dts-files.patch | 638 +
...IPS-ralink-add-cpu-frequency-scaling.patch | 100 +
...-the-commandline-from-the-devicetree.patch | 26 +
...20-fix-usb-issue-during-frequency-sc.patch | 57 +
...ralink-add-mt7628an-devicetree-files.patch | 292 +
...w-loading-irq-registers-from-the-dev.patch | 80 +
...026-MIPS-ralink-add-mt7628an-support.patch | 405 +
...027-serial-ralink-adds-mt7620-serial.patch | 28 +
...e-core-has-a-size-of-0x100-and-not-0.patch | 27 +
...ow-au1x00-and-rt288x-to-load-from-OF.patch | 32 +
...30-pinctrl-ralink-add-pinctrl-driver.patch | 1429 +
...031-PCI-MIPS-adds-rt2880-pci-support.patch | 329 +
...32-PCI-MIPS-adds-mt7620a-pcie-driver.patch | 409 +
.../0033-NET-multi-phy-support.patch | 60 +
.../0034-NET-add-of_get_mac_address_mtd.patch | 83 +
...-MIPS-add-ralink-SoC-ethernet-driver.patch | 5128 ++++
.../0036-NET-add-mt7621-ethernet-driver.patch | 6134 ++++
.../0037-USB-phy-add-ralink-SoC-driver.patch | 240 +
.../0038-USB-add-OHCI-EHCI-OF-binding.patch | 191 +
.../patches-3.14/0039-USB-adds-dwc_otg.patch | 24581 ++++++++++++++++
.../0040-USB-add-mt7621-xhci-support.patch | 5848 ++++
...x-cfi-cmdset-0002-erase-status-check.patch | 34 +
...mtd-cfi-cmdset-0002-force-word-write.patch | 75 +
...43-mtd-ralink-add-mt7620-nand-driver.patch | 2421 ++
...44-mtd-add-chunked-read-io-to-m25p80.patch | 166 +
.../0045-mtd-add-mt7621-nand-support.patch | 4455 +++
...DT-Add-documentation-for-gpio-ralink.patch | 65 +
...alink-add-gpio-driver-for-ralink-SoC.patch | 433 +
...IO-ralink-add-mt7621-gpio-controller.patch | 240 +
...-DT-Add-documentation-for-spi-rt2880.patch | 50 +
...SPI-ralink-add-Ralink-SoC-spi-driver.patch | 486 +
...1-SPI-MIPS-ralink-add-mt7621-support.patch | 351 +
...0052-i2c-MIPS-adds-ralink-I2C-driver.patch | 358 +
...IPS-ralink-add-sdhci-for-mt7620a-SoC.patch | 3446 +++
...054-DMA-ralink-add-rt2880-dma-engine.patch | 676 +
.../0055-asoc-add-mt7620-support.patch | 734 +
.../0056-watchdog-add-MT7621-support.patch | 237 +
...0057-uvc-add-iPassion-iP2970-support.patch | 257 +
.../0100-mtd-split-remove-padding.patch | 13 +
.../0101-mtd-add-rtn56u-support.patch | 28 +
.../patches-3.14/0103-MIPS-OWRTDTB.patch | 52 +
target/linux/ramips/rt288x/config-3.14 | 167 +
target/linux/ramips/rt305x/config-3.14 | 171 +
target/linux/ramips/rt3883/config-3.14 | 183 +
66 files changed, 64992 insertions(+)
create mode 100644 target/linux/ramips/mt7620a/config-3.14
create mode 100644 target/linux/ramips/mt7620n/config-3.14
create mode 100644 target/linux/ramips/mt7621/config-3.14
create mode 100644 target/linux/ramips/patches-3.14/0001-MIPS-ralink-add-verbose-pmu-info.patch
create mode 100644 target/linux/ramips/patches-3.14/0002-MIPS-ralink-add-a-helper-for-reading-the-ECO-version.patch
create mode 100644 target/linux/ramips/patches-3.14/0003-MIPS-ralink-add-rt_sysc_m32-helper.patch
create mode 100644 target/linux/ramips/patches-3.14/0004-MIPS-ralink-adds-a-bootrom-dumper-module.patch
create mode 100644 target/linux/ramips/patches-3.14/0005-MIPS-ralink-add-illegal-access-driver.patch
create mode 100644 target/linux/ramips/patches-3.14/0006-MIPS-ralink-add-missing-clk_set_rate-to-clk.c.patch
create mode 100644 target/linux/ramips/patches-3.14/0007-MIPS-ralink-add-support-for-MT7620n.patch
create mode 100644 target/linux/ramips/patches-3.14/0008-MIPS-ralink-allow-manual-memory-override.patch
create mode 100644 target/linux/ramips/patches-3.14/0009-MIPS-ralink-define-the-wmac-clock-on-mt7620.patch
create mode 100644 target/linux/ramips/patches-3.14/0010-MIPS-ralink-define-the-wmac-clock-on-rt3883.patch
create mode 100644 target/linux/ramips/patches-3.14/0011-MIPS-ralink-add-rt2880-wmac-clock.patch
create mode 100644 target/linux/ramips/patches-3.14/0012-MIPS-ralink-add-MT7621-support.patch
create mode 100644 target/linux/ramips/patches-3.14/0013-MIPS-ralink-add-MT7621-defconfig.patch
create mode 100644 target/linux/ramips/patches-3.14/0014-MIPS-ralink-add-MT7621-dts-file.patch
create mode 100644 target/linux/ramips/patches-3.14/0015-MIPS-ralink-cleanup-early_printk.patch
create mode 100644 target/linux/ramips/patches-3.14/0016-MIPS-ralink-add-MT7621-pcie-driver.patch
create mode 100644 target/linux/ramips/patches-3.14/0017-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch
create mode 100644 target/linux/ramips/patches-3.14/0018-MIPS-ralink-workaround-DTB-memory-issue.patch
create mode 100644 target/linux/ramips/patches-3.14/0019-MIPS-ralink-add-pseudo-pwm-led-trigger-based-on-time.patch
create mode 100644 target/linux/ramips/patches-3.14/0020-MIPS-ralink-update-dts-files.patch
create mode 100644 target/linux/ramips/patches-3.14/0021-MIPS-ralink-add-cpu-frequency-scaling.patch
create mode 100644 target/linux/ramips/patches-3.14/0022-MIPS-ralink-copy-the-commandline-from-the-devicetree.patch
create mode 100644 target/linux/ramips/patches-3.14/0023-MIPS-ralink-mt7620-fix-usb-issue-during-frequency-sc.patch
create mode 100644 target/linux/ramips/patches-3.14/0024-MIPS-ralink-add-mt7628an-devicetree-files.patch
create mode 100644 target/linux/ramips/patches-3.14/0025-MIPS-ralink-allow-loading-irq-registers-from-the-dev.patch
create mode 100644 target/linux/ramips/patches-3.14/0026-MIPS-ralink-add-mt7628an-support.patch
create mode 100644 target/linux/ramips/patches-3.14/0027-serial-ralink-adds-mt7620-serial.patch
create mode 100644 target/linux/ramips/patches-3.14/0028-serial-ralink-the-core-has-a-size-of-0x100-and-not-0.patch
create mode 100644 target/linux/ramips/patches-3.14/0029-serial-of-allow-au1x00-and-rt288x-to-load-from-OF.patch
create mode 100644 target/linux/ramips/patches-3.14/0030-pinctrl-ralink-add-pinctrl-driver.patch
create mode 100644 target/linux/ramips/patches-3.14/0031-PCI-MIPS-adds-rt2880-pci-support.patch
create mode 100644 target/linux/ramips/patches-3.14/0032-PCI-MIPS-adds-mt7620a-pcie-driver.patch
create mode 100644 target/linux/ramips/patches-3.14/0033-NET-multi-phy-support.patch
create mode 100644 target/linux/ramips/patches-3.14/0034-NET-add-of_get_mac_address_mtd.patch
create mode 100644 target/linux/ramips/patches-3.14/0035-NET-MIPS-add-ralink-SoC-ethernet-driver.patch
create mode 100644 target/linux/ramips/patches-3.14/0036-NET-add-mt7621-ethernet-driver.patch
create mode 100644 target/linux/ramips/patches-3.14/0037-USB-phy-add-ralink-SoC-driver.patch
create mode 100644 target/linux/ramips/patches-3.14/0038-USB-add-OHCI-EHCI-OF-binding.patch
create mode 100644 target/linux/ramips/patches-3.14/0039-USB-adds-dwc_otg.patch
create mode 100644 target/linux/ramips/patches-3.14/0040-USB-add-mt7621-xhci-support.patch
create mode 100644 target/linux/ramips/patches-3.14/0041-mtd-fix-cfi-cmdset-0002-erase-status-check.patch
create mode 100644 target/linux/ramips/patches-3.14/0042-mtd-cfi-cmdset-0002-force-word-write.patch
create mode 100644 target/linux/ramips/patches-3.14/0043-mtd-ralink-add-mt7620-nand-driver.patch
create mode 100644 target/linux/ramips/patches-3.14/0044-mtd-add-chunked-read-io-to-m25p80.patch
create mode 100644 target/linux/ramips/patches-3.14/0045-mtd-add-mt7621-nand-support.patch
create mode 100644 target/linux/ramips/patches-3.14/0046-DT-Add-documentation-for-gpio-ralink.patch
create mode 100644 target/linux/ramips/patches-3.14/0047-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch
create mode 100644 target/linux/ramips/patches-3.14/0048-GPIO-ralink-add-mt7621-gpio-controller.patch
create mode 100644 target/linux/ramips/patches-3.14/0049-DT-Add-documentation-for-spi-rt2880.patch
create mode 100644 target/linux/ramips/patches-3.14/0050-SPI-ralink-add-Ralink-SoC-spi-driver.patch
create mode 100644 target/linux/ramips/patches-3.14/0051-SPI-MIPS-ralink-add-mt7621-support.patch
create mode 100644 target/linux/ramips/patches-3.14/0052-i2c-MIPS-adds-ralink-I2C-driver.patch
create mode 100644 target/linux/ramips/patches-3.14/0053-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch
create mode 100644 target/linux/ramips/patches-3.14/0054-DMA-ralink-add-rt2880-dma-engine.patch
create mode 100644 target/linux/ramips/patches-3.14/0055-asoc-add-mt7620-support.patch
create mode 100644 target/linux/ramips/patches-3.14/0056-watchdog-add-MT7621-support.patch
create mode 100644 target/linux/ramips/patches-3.14/0057-uvc-add-iPassion-iP2970-support.patch
create mode 100644 target/linux/ramips/patches-3.14/0100-mtd-split-remove-padding.patch
create mode 100644 target/linux/ramips/patches-3.14/0101-mtd-add-rtn56u-support.patch
create mode 100644 target/linux/ramips/patches-3.14/0103-MIPS-OWRTDTB.patch
create mode 100644 target/linux/ramips/rt288x/config-3.14
create mode 100644 target/linux/ramips/rt305x/config-3.14
create mode 100644 target/linux/ramips/rt3883/config-3.14
diff --git a/target/linux/ramips/mt7620a/config-3.14 b/target/linux/ramips/mt7620a/config-3.14
new file mode 100644
index 0000000000..1ec82aebee
--- /dev/null
+++ b/target/linux/ramips/mt7620a/config-3.14
@@ -0,0 +1,184 @@
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAS_RESET_CONTROLLER=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_AT803X_PHY=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_CEVT_R4K=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLKEVT_RT3352=y
+CONFIG_CLKSRC_MMIO=y
+CONFIG_CLKSRC_OF=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+CONFIG_CPU_GENERIC_DUMP_TLB=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_MIPS32=y
+# CONFIG_CPU_MIPS32_R1 is not set
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_CPU_R4K_CACHE_TLB=y
+CONFIG_CPU_R4K_FPU=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CSRC_R4K=y
+CONFIG_DEBUG_PINCTRL=y
+CONFIG_DMA_NONCOHERENT=y
+# CONFIG_DTB_MT7620A_EVAL is not set
+CONFIG_DTB_RT_NONE=y
+CONFIG_DTC=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_EARLY_PRINTK_8250 is not set
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_NET_UTILS=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_DEVRES=y
+CONFIG_GPIO_RALINK=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_KVM=y
+CONFIG_HAVE_MACH_CLKDEV=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=m
+CONFIG_HZ_PERIODIC=y
+CONFIG_ICPLUS_PHY=y
+CONFIG_IMAGE_CMDLINE_HACK=y
+CONFIG_INET_LRO=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_CPU=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_INTC=y
+CONFIG_IRQ_WORK=y
+CONFIG_MDIO_BOARDINFO=y
+CONFIG_MIPS=y
+# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+# CONFIG_MIPS_MACHINE is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_O32_FP64_SUPPORT is not set
+# CONFIG_MLX5_CORE is not set
+CONFIG_MODULES_USE_ELF_REL=y
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND_MT7620=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_SPLIT_FIRMWARE=y
+CONFIG_MTD_UIMAGE_SPLIT=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_RALINK=y
+CONFIG_NET_RALINK_GSW_MT7620=y
+CONFIG_NET_RALINK_MDIO=y
+CONFIG_NET_RX_BUSY_POLL=y
+CONFIG_NLS=m
+CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_MTD=y
+CONFIG_OF_NET=y
+CONFIG_OF_PCI=y
+CONFIG_OF_PCI_IRQ=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYLIB=y
+# CONFIG_PINCONF is not set
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_RT2880=y
+# CONFIG_PINCTRL_SINGLE is not set
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_RALINK=y
+CONFIG_RALINK_USBPHY=y
+CONFIG_RALINK_WDT=y
+CONFIG_RA_NAT_NONE=y
+# CONFIG_RCU_STALL_COMMON is not set
+CONFIG_RESET_CONTROLLER=y
+# CONFIG_SCSI_DMA is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RT288X=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_SOC_MT7620=y
+# CONFIG_SOC_MT7621 is not set
+# CONFIG_SOC_RT288X is not set
+# CONFIG_SOC_RT305X is not set
+# CONFIG_SOC_RT3883 is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_RT2880=y
+CONFIG_SWCONFIG=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_USB=m
+CONFIG_USB_COMMON=m
+# CONFIG_USB_EHCI_HCD is not set
+CONFIG_USB_PHY=y
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_UHCI_HCD is not set
+CONFIG_USE_OF=y
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_ZBUD is not set
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/ramips/mt7620n/config-3.14 b/target/linux/ramips/mt7620n/config-3.14
new file mode 100644
index 0000000000..db95ddf264
--- /dev/null
+++ b/target/linux/ramips/mt7620n/config-3.14
@@ -0,0 +1,176 @@
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAS_RESET_CONTROLLER=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_CEVT_R4K=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLKEVT_RT3352=y
+CONFIG_CLKSRC_MMIO=y
+CONFIG_CLKSRC_OF=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+CONFIG_CPU_GENERIC_DUMP_TLB=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_MIPS32=y
+# CONFIG_CPU_MIPS32_R1 is not set
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_CPU_R4K_CACHE_TLB=y
+CONFIG_CPU_R4K_FPU=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CSRC_R4K=y
+CONFIG_DEBUG_PINCTRL=y
+CONFIG_DMA_NONCOHERENT=y
+# CONFIG_DTB_MT7620A_EVAL is not set
+CONFIG_DTB_RT_NONE=y
+CONFIG_DTC=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_EARLY_PRINTK_8250 is not set
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_NET_UTILS=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_DEVRES=y
+CONFIG_GPIO_RALINK=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_KVM=y
+CONFIG_HAVE_MACH_CLKDEV=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=m
+CONFIG_HZ_PERIODIC=y
+CONFIG_IMAGE_CMDLINE_HACK=y
+CONFIG_INET_LRO=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_CPU=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_INTC=y
+CONFIG_IRQ_WORK=y
+CONFIG_MDIO_BOARDINFO=y
+CONFIG_MIPS=y
+# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+# CONFIG_MIPS_MACHINE is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_O32_FP64_SUPPORT is not set
+CONFIG_MODULES_USE_ELF_REL=y
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_M25P80=y
+# CONFIG_MTD_NAND_MT7620 is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_SPLIT_FIRMWARE=y
+CONFIG_MTD_UIMAGE_SPLIT=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_RALINK=y
+CONFIG_NET_RALINK_GSW_MT7620=y
+CONFIG_NET_RALINK_MDIO=y
+CONFIG_NET_RX_BUSY_POLL=y
+CONFIG_NLS=m
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_MTD=y
+CONFIG_OF_NET=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+# CONFIG_PCI is not set
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYLIB=y
+# CONFIG_PINCONF is not set
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_RT2880=y
+# CONFIG_PINCTRL_SINGLE is not set
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_RALINK=y
+CONFIG_RALINK_USBPHY=y
+CONFIG_RALINK_WDT=y
+CONFIG_RA_NAT_NONE=y
+# CONFIG_RCU_STALL_COMMON is not set
+CONFIG_RESET_CONTROLLER=y
+# CONFIG_SCSI_DMA is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RT288X=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_SOC_MT7620=y
+# CONFIG_SOC_MT7621 is not set
+# CONFIG_SOC_RT288X is not set
+# CONFIG_SOC_RT305X is not set
+# CONFIG_SOC_RT3883 is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_RT2880=y
+CONFIG_SWCONFIG=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_USB=m
+CONFIG_USB_COMMON=m
+# CONFIG_USB_EHCI_HCD is not set
+CONFIG_USB_PHY=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USE_OF=y
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_ZBUD is not set
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/ramips/mt7621/config-3.14 b/target/linux/ramips/mt7621/config-3.14
new file mode 100644
index 0000000000..cb00c5149d
--- /dev/null
+++ b/target/linux/ramips/mt7621/config-3.14
@@ -0,0 +1,237 @@
+# CONFIG_32B_DESC is not set
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAS_RESET_CONTROLLER=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_BOARD_SCACHE=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_CEVT_GIC is not set
+CONFIG_CEVT_R4K=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+CONFIG_CPU_GENERIC_DUMP_TLB=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_MIPS32=y
+# CONFIG_CPU_MIPS32_R1 is not set
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_CPU_MIPSR2_IRQ_EI=y
+CONFIG_CPU_MIPSR2_IRQ_VI=y
+CONFIG_CPU_R4K_CACHE_TLB=y
+CONFIG_CPU_R4K_FPU=y
+CONFIG_CPU_RMAP=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CSRC_R4K=y
+CONFIG_DEBUG_PINCTRL=y
+CONFIG_DMA_NONCOHERENT=y
+# CONFIG_DTB_MT7621_EVAL is not set
+CONFIG_DTB_RT_NONE=y
+CONFIG_DTC=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_EARLY_PRINTK_8250 is not set
+CONFIG_ESW_DOUBLE_VLAN_TAG=y
+# CONFIG_GE1_MII_AN is not set
+# CONFIG_GE1_MII_FORCE_100 is not set
+# CONFIG_GE1_RGMII_AN is not set
+CONFIG_GE1_RGMII_FORCE_1000=y
+# CONFIG_GE1_RGMII_NONE is not set
+# CONFIG_GE1_RVMII_FORCE_100 is not set
+# CONFIG_GE1_TRGMII_FORCE_1200 is not set
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_NET_UTILS=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_DEVRES=y
+# CONFIG_GPIO_MT7621 is not set
+CONFIG_GPIO_SYSFS=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_KVM=y
+CONFIG_HAVE_MACH_CLKDEV=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=m
+CONFIG_HZ_PERIODIC=y
+CONFIG_IMAGE_CMDLINE_HACK=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_CPU=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_GIC=y
+CONFIG_IRQ_WORK=y
+# CONFIG_LAN_WAN_SUPPORT is not set
+CONFIG_MDIO_BOARDINFO=y
+CONFIG_MIPS=y
+CONFIG_MIPS_CMP=y
+CONFIG_MIPS_CPU_SCACHE=y
+# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=6
+CONFIG_MIPS_L1_CACHE_SHIFT_6=y
+# CONFIG_MIPS_MACHINE is not set
+CONFIG_MIPS_MT=y
+# CONFIG_MIPS_MT_DISABLED is not set
+CONFIG_MIPS_MT_FPAFF=y
+CONFIG_MIPS_MT_SMP=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_O32_FP64_SUPPORT is not set
+CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y
+# CONFIG_MIPS_VPE_LOADER is not set
+# CONFIG_MLX5_CORE is not set
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_MT7621_ASIC=y
+# CONFIG_MT7621_WDT is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_SPLIT_FIRMWARE=y
+CONFIG_MTD_UIMAGE_SPLIT=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NET_FLOW_LIMIT=y
+# CONFIG_NET_RALINK is not set
+CONFIG_NET_RX_BUSY_POLL=y
+CONFIG_NLS=m
+CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
+CONFIG_NR_CPUS=4
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_MTD=y
+CONFIG_OF_NET=y
+CONFIG_OF_PCI=y
+CONFIG_OF_PCI_IRQ=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PCI=y
+CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PDMA_NEW=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYLIB=y
+# CONFIG_PINCONF is not set
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_RT2880=y
+# CONFIG_PINCTRL_SINGLE is not set
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_RAETH=y
+CONFIG_RAETH_CHECKSUM_OFFLOAD=y
+# CONFIG_RAETH_GMAC2 is not set
+# CONFIG_RAETH_HW_VLAN_RX is not set
+# CONFIG_RAETH_HW_VLAN_TX is not set
+# CONFIG_RAETH_LRO is not set
+# CONFIG_RAETH_NAPI is not set
+# CONFIG_RAETH_QDMA is not set
+CONFIG_RAETH_SCATTER_GATHER_RX_DMA=y
+# CONFIG_RAETH_SKB_RECYCLE_2K is not set
+# CONFIG_RAETH_SPECIAL_TAG is not set
+# CONFIG_RAETH_TSO is not set
+CONFIG_RALINK=y
+CONFIG_RALINK_MT7621=y
+CONFIG_RALINK_USBPHY=y
+# CONFIG_RALINK_WDT is not set
+CONFIG_RA_NAT_NONE=y
+# CONFIG_RA_NETWORK_TASKLET_BH is not set
+CONFIG_RA_NETWORK_WORKQUEUE_BH=y
+CONFIG_RCU_STALL_COMMON=y
+CONFIG_RESET_CONTROLLER=y
+CONFIG_RFS_ACCEL=y
+CONFIG_RPS=y
+CONFIG_RT_3052_ESW=y
+CONFIG_SCHED_SMT=y
+# CONFIG_SCSI_DMA is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_SLUB_CPU_PARTIAL=y
+CONFIG_SMP=y
+CONFIG_SMP_UP=y
+# CONFIG_SOC_MT7620 is not set
+CONFIG_SOC_MT7621=y
+# CONFIG_SOC_RT288X is not set
+# CONFIG_SOC_RT305X is not set
+# CONFIG_SOC_RT3883 is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_RT2880=y
+CONFIG_STOP_MACHINE=y
+CONFIG_SWCONFIG=y
+CONFIG_SYNC_R4K=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_MIPS_CMP=y
+CONFIG_SYS_SUPPORTS_MULTITHREADING=y
+CONFIG_SYS_SUPPORTS_SCHED_SMT=y
+CONFIG_SYS_SUPPORTS_SMP=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TREE_RCU=y
+CONFIG_USB=m
+CONFIG_USB_COMMON=m
+# CONFIG_USB_EHCI_HCD is not set
+CONFIG_USB_MT7621_XHCI_PLATFORM=y
+CONFIG_USB_PHY=y
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_UHCI_HCD is not set
+CONFIG_USB_XHCI_HCD=m
+CONFIG_USB_XHCI_PLATFORM=y
+CONFIG_USE_OF=y
+CONFIG_WAN_AT_P0=y
+# CONFIG_WAN_AT_P4 is not set
+CONFIG_WATCHDOG_CORE=y
+CONFIG_WEAK_ORDERING=y
+CONFIG_XPS=y
+# CONFIG_ZBUD is not set
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/ramips/patches-3.14/0001-MIPS-ralink-add-verbose-pmu-info.patch b/target/linux/ramips/patches-3.14/0001-MIPS-ralink-add-verbose-pmu-info.patch
new file mode 100644
index 0000000000..51094d59b2
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0001-MIPS-ralink-add-verbose-pmu-info.patch
@@ -0,0 +1,64 @@
+From 453850d315070678245f61202ae343153589e5a6 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 27 Jul 2014 09:16:50 +0100
+Subject: [PATCH 01/57] MIPS: ralink: add verbose pmu info
+
+Print the PMU and LDO settings on boot.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/mt7620.c | 26 ++++++++++++++++++++++++++
+ 1 file changed, 26 insertions(+)
+
+diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
+index a3ad56c..5846817 100644
+--- a/arch/mips/ralink/mt7620.c
++++ b/arch/mips/ralink/mt7620.c
+@@ -20,6 +20,22 @@
+
+ #include "common.h"
+
++/* analog */
++#define PMU0_CFG 0x88
++#define PMU_SW_SET BIT(28)
++#define A_DCDC_EN BIT(24)
++#define A_SSC_PERI BIT(19)
++#define A_SSC_GEN BIT(18)
++#define A_SSC_M 0x3
++#define A_SSC_S 16
++#define A_DLY_M 0x7
++#define A_DLY_S 8
++#define A_VTUNE_M 0xff
++
++/* digital */
++#define PMU1_CFG 0x8C
++#define DIG_SW_SEL BIT(25)
++
+ /* does the board have sdram or ddram */
+ static int dram_type;
+
+@@ -339,6 +355,8 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
+ u32 n1;
+ u32 rev;
+ u32 cfg0;
++ u32 pmu0;
++ u32 pmu1;
+
+ n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
+ n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
+@@ -386,4 +404,12 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
+ BUG();
+ }
+ soc_info->mem_base = MT7620_DRAM_BASE;
++
++ pmu0 = __raw_readl(sysc + PMU0_CFG);
++ pmu1 = __raw_readl(sysc + PMU1_CFG);
++
++ pr_info("Analog PMU set to %s control\n",
++ (pmu0 & PMU_SW_SET) ? ("sw") : ("hw"));
++ pr_info("Digital PMU set to %s control\n",
++ (pmu1 & DIG_SW_SEL) ? ("sw") : ("hw"));
+ }
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0002-MIPS-ralink-add-a-helper-for-reading-the-ECO-version.patch b/target/linux/ramips/patches-3.14/0002-MIPS-ralink-add-a-helper-for-reading-the-ECO-version.patch
new file mode 100644
index 0000000000..92155d4f3a
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0002-MIPS-ralink-add-a-helper-for-reading-the-ECO-version.patch
@@ -0,0 +1,27 @@
+From 1751f28d4779df83cc793c9d7ff75485c0ceaa23 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 16 Mar 2014 04:53:02 +0000
+Subject: [PATCH 02/57] MIPS: ralink: add a helper for reading the ECO version
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/include/asm/mach-ralink/mt7620.h | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+diff --git a/arch/mips/include/asm/mach-ralink/mt7620.h b/arch/mips/include/asm/mach-ralink/mt7620.h
+index 6f9b24f..7ff9290 100644
+--- a/arch/mips/include/asm/mach-ralink/mt7620.h
++++ b/arch/mips/include/asm/mach-ralink/mt7620.h
+@@ -105,4 +105,9 @@
+ #define MT7620_GPIO_MODE_EPHY BIT(15)
+ #define MT7620_GPIO_MODE_WDT BIT(22)
+
++static inline int mt7620_get_eco(void)
++{
++ return rt_sysc_r32(SYSC_REG_CHIP_REV) & CHIP_REV_ECO_MASK;
++}
++
+ #endif
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0003-MIPS-ralink-add-rt_sysc_m32-helper.patch b/target/linux/ramips/patches-3.14/0003-MIPS-ralink-add-rt_sysc_m32-helper.patch
new file mode 100644
index 0000000000..e254ac0cf8
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0003-MIPS-ralink-add-rt_sysc_m32-helper.patch
@@ -0,0 +1,31 @@
+From 0f0f041cd6a05eb865e391155d3299bb55ff00e3 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 19 May 2013 00:42:23 +0200
+Subject: [PATCH 03/57] MIPS: ralink: add rt_sysc_m32 helper
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/include/asm/mach-ralink/ralink_regs.h | 7 +++++++
+ 1 file changed, 7 insertions(+)
+
+diff --git a/arch/mips/include/asm/mach-ralink/ralink_regs.h b/arch/mips/include/asm/mach-ralink/ralink_regs.h
+index 5a508f9..bd93014 100644
+--- a/arch/mips/include/asm/mach-ralink/ralink_regs.h
++++ b/arch/mips/include/asm/mach-ralink/ralink_regs.h
+@@ -26,6 +26,13 @@ static inline u32 rt_sysc_r32(unsigned reg)
+ return __raw_readl(rt_sysc_membase + reg);
+ }
+
++static inline void rt_sysc_m32(u32 clr, u32 set, unsigned reg)
++{
++ u32 val = rt_sysc_r32(reg) & ~clr;
++
++ __raw_writel(val | set, rt_sysc_membase + reg);
++}
++
+ static inline void rt_memc_w32(u32 val, unsigned reg)
+ {
+ __raw_writel(val, rt_memc_membase + reg);
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0004-MIPS-ralink-adds-a-bootrom-dumper-module.patch b/target/linux/ramips/patches-3.14/0004-MIPS-ralink-adds-a-bootrom-dumper-module.patch
new file mode 100644
index 0000000000..88e0f52ef9
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0004-MIPS-ralink-adds-a-bootrom-dumper-module.patch
@@ -0,0 +1,83 @@
+From af03898c74172ab16d610f3eeaa65f66401eb7db Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 21 May 2013 15:50:31 +0200
+Subject: [PATCH 04/57] MIPS: ralink: adds a bootrom dumper module
+
+This patch adds a trivial driver that allows userland to extract the bootrom of
+a SoC via debugfs.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/Makefile | 2 ++
+ arch/mips/ralink/bootrom.c | 48 ++++++++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 50 insertions(+)
+ create mode 100644 arch/mips/ralink/bootrom.c
+
+diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
+index 98ae349..584a8d9 100644
+--- a/arch/mips/ralink/Makefile
++++ b/arch/mips/ralink/Makefile
+@@ -17,4 +17,6 @@ obj-$(CONFIG_SOC_MT7620) += mt7620.o
+
+ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+
++obj-$(CONFIG_DEBUG_FS) += bootrom.o
++
+ obj-y += dts/
+diff --git a/arch/mips/ralink/bootrom.c b/arch/mips/ralink/bootrom.c
+new file mode 100644
+index 0000000..f926f6f
+--- /dev/null
++++ b/arch/mips/ralink/bootrom.c
+@@ -0,0 +1,48 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/debugfs.h>
++#include <linux/seq_file.h>
++
++#define BOOTROM_OFFSET 0x10118000
++#define BOOTROM_SIZE 0x8000
++
++static void __iomem *membase = (void __iomem*) KSEG1ADDR(BOOTROM_OFFSET);
++
++static int bootrom_show(struct seq_file *s, void *unused)
++{
++ seq_write(s, membase, BOOTROM_SIZE);
++
++ return 0;
++}
++
++static int bootrom_open(struct inode *inode, struct file *file)
++{
++ return single_open(file, bootrom_show, NULL);
++}
++
++static const struct file_operations bootrom_file_ops = {
++ .open = bootrom_open,
++ .read = seq_read,
++ .llseek = seq_lseek,
++ .release = single_release,
++};
++
++static int bootrom_setup(void)
++{
++ if (!debugfs_create_file("bootrom", 0444,
++ NULL, NULL, &bootrom_file_ops)) {
++ pr_err("Failed to create bootrom debugfs file\n");
++
++ return -EINVAL;
++ }
++
++ return 0;
++}
++
++postcore_initcall(bootrom_setup);
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0005-MIPS-ralink-add-illegal-access-driver.patch b/target/linux/ramips/patches-3.14/0005-MIPS-ralink-add-illegal-access-driver.patch
new file mode 100644
index 0000000000..5c8414a7b6
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0005-MIPS-ralink-add-illegal-access-driver.patch
@@ -0,0 +1,123 @@
+From 60999174904c731e55992a4087999bbd4e5f2051 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 16 May 2013 23:28:23 +0200
+Subject: [PATCH 05/57] MIPS: ralink: add illegal access driver
+
+these SoCs have a special irq that fires upon an illegal memmory access.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/Makefile | 2 +
+ arch/mips/ralink/ill_acc.c | 87 ++++++++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 89 insertions(+)
+ create mode 100644 arch/mips/ralink/ill_acc.c
+
+diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
+index 584a8d9..fc57c16 100644
+--- a/arch/mips/ralink/Makefile
++++ b/arch/mips/ralink/Makefile
+@@ -10,6 +10,8 @@ obj-y := prom.o of.o reset.o clk.o irq.o timer.o
+
+ obj-$(CONFIG_CLKEVT_RT3352) += cevt-rt3352.o
+
++obj-$(CONFIG_RALINK_ILL_ACC) += ill_acc.o
++
+ obj-$(CONFIG_SOC_RT288X) += rt288x.o
+ obj-$(CONFIG_SOC_RT305X) += rt305x.o
+ obj-$(CONFIG_SOC_RT3883) += rt3883.o
+diff --git a/arch/mips/ralink/ill_acc.c b/arch/mips/ralink/ill_acc.c
+new file mode 100644
+index 0000000..4a3f696
+--- /dev/null
++++ b/arch/mips/ralink/ill_acc.c
+@@ -0,0 +1,87 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/interrupt.h>
++#include <linux/of_platform.h>
++#include <linux/of_irq.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#define REG_ILL_ACC_ADDR 0x10
++#define REG_ILL_ACC_TYPE 0x14
++
++#define ILL_INT_STATUS BIT(31)
++#define ILL_ACC_WRITE BIT(30)
++#define ILL_ACC_LEN_M 0xff
++#define ILL_ACC_OFF_M 0xf
++#define ILL_ACC_OFF_S 16
++#define ILL_ACC_ID_M 0x7
++#define ILL_ACC_ID_S 8
++
++#define DRV_NAME "ill_acc"
++
++static const char *ill_acc_ids[] = {
++ "cpu", "dma", "ppe", "pdma rx","pdma tx", "pci/e", "wmac", "usb",
++};
++
++static irqreturn_t ill_acc_irq_handler(int irq, void *_priv)
++{
++ struct device *dev = (struct device *) _priv;
++ u32 addr = rt_memc_r32(REG_ILL_ACC_ADDR);
++ u32 type = rt_memc_r32(REG_ILL_ACC_TYPE);
++
++ dev_err(dev, "illegal %s access from %s - addr:0x%08x offset:%d len:%d\n",
++ (type & ILL_ACC_WRITE) ? ("write") : ("read"),
++ ill_acc_ids[(type >> ILL_ACC_ID_S) & ILL_ACC_ID_M],
++ addr, (type >> ILL_ACC_OFF_S) & ILL_ACC_OFF_M,
++ type & ILL_ACC_LEN_M);
++
++ rt_memc_w32(REG_ILL_ACC_TYPE, REG_ILL_ACC_TYPE);
++
++ return IRQ_HANDLED;
++}
++
++static int __init ill_acc_of_setup(void)
++{
++ struct platform_device *pdev;
++ struct device_node *np;
++ int irq;
++
++ /* somehow this driver breaks on RT5350 */
++ if (of_machine_is_compatible("ralink,rt5350-soc"))
++ return -EINVAL;
++
++ np = of_find_compatible_node(NULL, NULL, "ralink,rt3050-memc");
++ if (!np)
++ return -EINVAL;
++
++ pdev = of_find_device_by_node(np);
++ if (!pdev) {
++ pr_err("%s: failed to lookup pdev\n", np->name);
++ return -EINVAL;
++ }
++
++ irq = irq_of_parse_and_map(np, 0);
++ if (!irq) {
++ dev_err(&pdev->dev, "failed to get irq\n");
++ return -EINVAL;
++ }
++
++ if (request_irq(irq, ill_acc_irq_handler, 0, "ill_acc", &pdev->dev)) {
++ dev_err(&pdev->dev, "failed to request irq\n");
++ return -EINVAL;
++ }
++
++ rt_memc_w32(ILL_INT_STATUS, REG_ILL_ACC_TYPE);
++
++ dev_info(&pdev->dev, "irq registered\n");
++
++ return 0;
++}
++
++arch_initcall(ill_acc_of_setup);
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0006-MIPS-ralink-add-missing-clk_set_rate-to-clk.c.patch b/target/linux/ramips/patches-3.14/0006-MIPS-ralink-add-missing-clk_set_rate-to-clk.c.patch
new file mode 100644
index 0000000000..280f1074c4
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0006-MIPS-ralink-add-missing-clk_set_rate-to-clk.c.patch
@@ -0,0 +1,32 @@
+From 979ad9f0324ad8fa5eb4a00b57d9feb061aa3200 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 16 Mar 2014 04:38:07 +0000
+Subject: [PATCH 06/57] MIPS: ralink: add missing clk_set_rate() to clk.c
+
+This function was missing causing allmod to fail.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/clk.c | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+diff --git a/arch/mips/ralink/clk.c b/arch/mips/ralink/clk.c
+index 5d0983d..feb5a9b 100644
+--- a/arch/mips/ralink/clk.c
++++ b/arch/mips/ralink/clk.c
+@@ -56,6 +56,12 @@ unsigned long clk_get_rate(struct clk *clk)
+ }
+ EXPORT_SYMBOL_GPL(clk_get_rate);
+
++int clk_set_rate(struct clk *clk, unsigned long rate)
++{
++ return -1;
++}
++EXPORT_SYMBOL_GPL(clk_set_rate);
++
+ void __init plat_time_init(void)
+ {
+ struct clk *clk;
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0007-MIPS-ralink-add-support-for-MT7620n.patch b/target/linux/ramips/patches-3.14/0007-MIPS-ralink-add-support-for-MT7620n.patch
new file mode 100644
index 0000000000..3606acbfed
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0007-MIPS-ralink-add-support-for-MT7620n.patch
@@ -0,0 +1,73 @@
+From efc0f99cebcab21dbabcc634b9dbb963bbbbcab8 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 27 Jul 2014 09:23:36 +0100
+Subject: [PATCH 07/57] MIPS: ralink: add support for MT7620n
+
+This is the small version of MT7620a.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/include/asm/mach-ralink/mt7620.h | 7 ++-----
+ arch/mips/ralink/mt7620.c | 19 ++++++++++++-------
+ 2 files changed, 14 insertions(+), 12 deletions(-)
+
+diff --git a/arch/mips/include/asm/mach-ralink/mt7620.h b/arch/mips/include/asm/mach-ralink/mt7620.h
+index 7ff9290..27b2fa9 100644
+--- a/arch/mips/include/asm/mach-ralink/mt7620.h
++++ b/arch/mips/include/asm/mach-ralink/mt7620.h
+@@ -25,11 +25,8 @@
+ #define SYSC_REG_CPLL_CONFIG0 0x54
+ #define SYSC_REG_CPLL_CONFIG1 0x58
+
+-#define MT7620N_CHIP_NAME0 0x33365452
+-#define MT7620N_CHIP_NAME1 0x20203235
+-
+-#define MT7620A_CHIP_NAME0 0x3637544d
+-#define MT7620A_CHIP_NAME1 0x20203032
++#define MT7620_CHIP_NAME0 0x3637544d
++#define MT7620_CHIP_NAME1 0x20203032
+
+ #define SYSCFG0_XTAL_FREQ_SEL BIT(6)
+
+diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
+index 5846817..4fdee17 100644
+--- a/arch/mips/ralink/mt7620.c
++++ b/arch/mips/ralink/mt7620.c
+@@ -357,22 +357,27 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
+ u32 cfg0;
+ u32 pmu0;
+ u32 pmu1;
++ u32 bga;
+
+ n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
+ n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
++ rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
++ bga = (rev >> CHIP_REV_PKG_SHIFT) & CHIP_REV_PKG_MASK;
+
+- if (n0 == MT7620N_CHIP_NAME0 && n1 == MT7620N_CHIP_NAME1) {
+- name = "MT7620N";
+- soc_info->compatible = "ralink,mt7620n-soc";
+- } else if (n0 == MT7620A_CHIP_NAME0 && n1 == MT7620A_CHIP_NAME1) {
++ if (n0 != MT7620_CHIP_NAME0 || n1 != MT7620_CHIP_NAME1)
++ panic("mt7620: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
++
++ if (bga) {
+ name = "MT7620A";
+ soc_info->compatible = "ralink,mt7620a-soc";
+ } else {
+- panic("mt7620: unknown SoC, n0:%08x n1:%08x", n0, n1);
++ name = "MT7620N";
++ soc_info->compatible = "ralink,mt7620n-soc";
++#ifdef CONFIG_PCI
++ panic("mt7620n is only supported for non pci kernels");
++#endif
+ }
+
+- rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
+-
+ snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
+ "Ralink %s ver:%u eco:%u",
+ name,
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0008-MIPS-ralink-allow-manual-memory-override.patch b/target/linux/ramips/patches-3.14/0008-MIPS-ralink-allow-manual-memory-override.patch
new file mode 100644
index 0000000000..bbbe7aa860
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0008-MIPS-ralink-allow-manual-memory-override.patch
@@ -0,0 +1,50 @@
+From 071e97587a291d3a5bbd614a425f46b7f90310aa Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 16 Mar 2014 04:40:48 +0000
+Subject: [PATCH 08/57] MIPS: ralink: allow manual memory override
+
+RT5350 relies on the bootloader setting up the memc correctly.
+On sme boards the setup is incorrect leading to 32 MB being available but only 16 being recognized. Allow these boards to manually override the memory range
+.
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/of.c | 16 +++++++++++++++-
+ 1 file changed, 15 insertions(+), 1 deletion(-)
+
+diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
+index eccc552..1b81e8f 100644
+--- a/arch/mips/ralink/of.c
++++ b/arch/mips/ralink/of.c
+@@ -78,6 +78,17 @@ void __init device_tree_init(void)
+ free_bootmem(base, size);
+ }
+
++static int memory_dtb;
++
++static int __init early_init_dt_find_memory(unsigned long node, const char *uname,
++ int depth, void *data)
++{
++ if (depth == 1 && !strcmp(uname, "memory@0"))
++ memory_dtb = 1;
++
++ return 0;
++}
++
+ void __init plat_mem_setup(void)
+ {
+ set_io_port_base(KSEG1);
+@@ -88,7 +99,10 @@ void __init plat_mem_setup(void)
+ */
+ __dt_setup_arch(&__dtb_start);
+
+- if (soc_info.mem_size)
++ of_scan_flat_dt(early_init_dt_find_memory, NULL);
++ if (memory_dtb)
++ of_scan_flat_dt(early_init_dt_scan_memory, NULL);
++ else if (soc_info.mem_size)
+ add_memory_region(soc_info.mem_base, soc_info.mem_size * SZ_1M,
+ BOOT_MEM_RAM);
+ else
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0009-MIPS-ralink-define-the-wmac-clock-on-mt7620.patch b/target/linux/ramips/patches-3.14/0009-MIPS-ralink-define-the-wmac-clock-on-mt7620.patch
new file mode 100644
index 0000000000..17ba702fdd
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0009-MIPS-ralink-define-the-wmac-clock-on-mt7620.patch
@@ -0,0 +1,25 @@
+From 1cb19fe02c830e278b91498edea09fbda37c4a21 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 27 Jul 2014 10:13:43 +0100
+Subject: [PATCH 09/57] MIPS: ralink: define the wmac clock on mt7620
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/mt7620.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
+index 4fdee17..c883973 100644
+--- a/arch/mips/ralink/mt7620.c
++++ b/arch/mips/ralink/mt7620.c
+@@ -336,6 +336,7 @@ void __init ralink_clk_init(void)
+ ralink_clk_add("10000500.uart", periph_rate);
+ ralink_clk_add("10000b00.spi", sys_rate);
+ ralink_clk_add("10000c00.uartlite", periph_rate);
++ ralink_clk_add("10180000.wmac", xtal_rate);
+ }
+
+ void __init ralink_of_remap(void)
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0010-MIPS-ralink-define-the-wmac-clock-on-rt3883.patch b/target/linux/ramips/patches-3.14/0010-MIPS-ralink-define-the-wmac-clock-on-rt3883.patch
new file mode 100644
index 0000000000..551bd2a8eb
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0010-MIPS-ralink-define-the-wmac-clock-on-rt3883.patch
@@ -0,0 +1,25 @@
+From 1f17cf131fc2ae7fa2651dbe6a622dd125939718 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 27 Jul 2014 10:14:30 +0100
+Subject: [PATCH 10/57] MIPS: ralink: define the wmac clock on rt3883
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/rt3883.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/arch/mips/ralink/rt3883.c b/arch/mips/ralink/rt3883.c
+index b474ac2..58b5b9f 100644
+--- a/arch/mips/ralink/rt3883.c
++++ b/arch/mips/ralink/rt3883.c
+@@ -204,6 +204,7 @@ void __init ralink_clk_init(void)
+ ralink_clk_add("10000b00.spi", sys_rate);
+ ralink_clk_add("10000c00.uartlite", 40000000);
+ ralink_clk_add("10100000.ethernet", sys_rate);
++ ralink_clk_add("10180000.wmac", 40000000);
+ }
+
+ void __init ralink_of_remap(void)
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0011-MIPS-ralink-add-rt2880-wmac-clock.patch b/target/linux/ramips/patches-3.14/0011-MIPS-ralink-add-rt2880-wmac-clock.patch
new file mode 100644
index 0000000000..fd8c28a7f7
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0011-MIPS-ralink-add-rt2880-wmac-clock.patch
@@ -0,0 +1,34 @@
+From bf4f5250117cd65a78903b8ce302499806416ed1 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 4 Aug 2014 09:52:22 +0200
+Subject: [PATCH 11/57] MIPS: ralink: add rt2880 wmac clock
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/rt288x.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+diff --git a/arch/mips/ralink/rt288x.c b/arch/mips/ralink/rt288x.c
+index f87de1a..90e8934 100644
+--- a/arch/mips/ralink/rt288x.c
++++ b/arch/mips/ralink/rt288x.c
+@@ -76,7 +76,7 @@ struct ralink_pinmux rt_gpio_pinmux = {
+
+ void __init ralink_clk_init(void)
+ {
+- unsigned long cpu_rate;
++ unsigned long cpu_rate, wmac_rate = 40000000;
+ u32 t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG);
+ t = ((t >> SYSTEM_CONFIG_CPUCLK_SHIFT) & SYSTEM_CONFIG_CPUCLK_MASK);
+
+@@ -101,6 +101,7 @@ void __init ralink_clk_init(void)
+ ralink_clk_add("300500.uart", cpu_rate / 2);
+ ralink_clk_add("300c00.uartlite", cpu_rate / 2);
+ ralink_clk_add("400000.ethernet", cpu_rate / 2);
++ ralink_clk_add("480000.wmac", wmac_rate);
+ }
+
+ void __init ralink_of_remap(void)
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0012-MIPS-ralink-add-MT7621-support.patch b/target/linux/ramips/patches-3.14/0012-MIPS-ralink-add-MT7621-support.patch
new file mode 100644
index 0000000000..ef077e1ed0
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0012-MIPS-ralink-add-MT7621-support.patch
@@ -0,0 +1,751 @@
+From c8c69923236f2f3f184ddcc7eb41c113b5cc3223 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 27 Jul 2014 10:57:40 +0100
+Subject: [PATCH 12/57] MIPS: ralink: add MT7621 support
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/include/asm/gic.h | 4 +
+ arch/mips/include/asm/mach-ralink/irq.h | 9 +
+ arch/mips/include/asm/mach-ralink/mt7621.h | 39 ++++
+ arch/mips/kernel/vmlinux.lds.S | 1 +
+ arch/mips/ralink/Kconfig | 18 ++
+ arch/mips/ralink/Makefile | 7 +-
+ arch/mips/ralink/Platform | 5 +
+ arch/mips/ralink/irq-gic.c | 271 ++++++++++++++++++++++++++++
+ arch/mips/ralink/malta-amon.c | 81 +++++++++
+ arch/mips/ralink/mt7621.c | 183 +++++++++++++++++++
+ 10 files changed, 617 insertions(+), 1 deletion(-)
+ create mode 100644 arch/mips/include/asm/mach-ralink/irq.h
+ create mode 100644 arch/mips/include/asm/mach-ralink/mt7621.h
+ create mode 100644 arch/mips/ralink/irq-gic.c
+ create mode 100644 arch/mips/ralink/malta-amon.c
+ create mode 100644 arch/mips/ralink/mt7621.c
+
+diff --git a/arch/mips/include/asm/gic.h b/arch/mips/include/asm/gic.h
+index b2e3e93..29fba50 100644
+--- a/arch/mips/include/asm/gic.h
++++ b/arch/mips/include/asm/gic.h
+@@ -19,7 +19,11 @@
+ #define GIC_TRIG_EDGE 1
+ #define GIC_TRIG_LEVEL 0
+
++#define GIC_NUM_INTRS 64
++
++#ifndef GIC_NUM_INTRS
+ #define GIC_NUM_INTRS (24 + NR_CPUS * 2)
++#endif
+
+ #define MSK(n) ((1 << (n)) - 1)
+ #define REG32(addr) (*(volatile unsigned int *) (addr))
+diff --git a/arch/mips/include/asm/mach-ralink/irq.h b/arch/mips/include/asm/mach-ralink/irq.h
+new file mode 100644
+index 0000000..4321865
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ralink/irq.h
+@@ -0,0 +1,9 @@
++#ifndef __ASM_MACH_RALINK_IRQ_H
++#define __ASM_MACH_RALINK_IRQ_H
++
++#define GIC_NUM_INTRS 64
++#define NR_IRQS 256
++
++#include_next <irq.h>
++
++#endif
+diff --git a/arch/mips/include/asm/mach-ralink/mt7621.h b/arch/mips/include/asm/mach-ralink/mt7621.h
+new file mode 100644
+index 0000000..21c8dc2
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ralink/mt7621.h
+@@ -0,0 +1,39 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * Parts of this file are based on Ralink's 2.6.21 BSP
++ *
++ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
++ */
++
++#ifndef _MT7621_REGS_H_
++#define _MT7621_REGS_H_
++
++#define MT7621_SYSC_BASE 0x1E000000
++
++#define SYSC_REG_CHIP_NAME0 0x00
++#define SYSC_REG_CHIP_NAME1 0x04
++#define SYSC_REG_CHIP_REV 0x0c
++#define SYSC_REG_SYSTEM_CONFIG0 0x10
++#define SYSC_REG_SYSTEM_CONFIG1 0x14
++
++#define CHIP_REV_PKG_MASK 0x1
++#define CHIP_REV_PKG_SHIFT 16
++#define CHIP_REV_VER_MASK 0xf
++#define CHIP_REV_VER_SHIFT 8
++#define CHIP_REV_ECO_MASK 0xf
++
++#define MT7621_DRAM_BASE 0x0
++#define MT7621_DDR2_SIZE_MIN 32
++#define MT7621_DDR2_SIZE_MAX 256
++
++#define MT7621_CHIP_NAME0 0x3637544D
++#define MT7621_CHIP_NAME1 0x20203132
++
++#define MIPS_GIC_IRQ_BASE (MIPS_CPU_IRQ_BASE + 8)
++
++#endif
+diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
+index 3b46f7c..fa925b7 100644
+--- a/arch/mips/kernel/vmlinux.lds.S
++++ b/arch/mips/kernel/vmlinux.lds.S
+@@ -51,6 +51,7 @@ SECTIONS
+ /* read-only */
+ _text = .; /* Text and read-only data */
+ .text : {
++ /*. = . + 0x8000; */
+ TEXT_TEXT
+ SCHED_TEXT
+ LOCK_TEXT
+diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
+index 1bfd1c1..6a04360 100644
+--- a/arch/mips/ralink/Kconfig
++++ b/arch/mips/ralink/Kconfig
+@@ -7,6 +7,11 @@ config CLKEVT_RT3352
+ select CLKSRC_OF
+ select CLKSRC_MMIO
+
++config IRQ_INTC
++ bool
++ default y
++ depends on !SOC_MT7621
++
+ choice
+ prompt "Ralink SoC selection"
+ default SOC_RT305X
+@@ -34,6 +39,15 @@ choice
+ select USB_ARCH_HAS_OHCI
+ select USB_ARCH_HAS_EHCI
+
++ config SOC_MT7621
++ bool "MT7621"
++ select MIPS_CPU_SCACHE
++ select SYS_SUPPORTS_MULTITHREADING
++ select SYS_SUPPORTS_SMP
++ select SYS_SUPPORTS_MIPS_CMP
++ select IRQ_GIC
++ select HW_HAS_PCI
++
+ endchoice
+
+ choice
+@@ -61,6 +75,10 @@ choice
+ bool "MT7620A eval kit"
+ depends on SOC_MT7620
+
++ config DTB_MT7621_EVAL
++ bool "MT7621 eval kit"
++ depends on SOC_MT7621
++
+ endchoice
+
+ endif
+diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
+index fc57c16..ad18cdf 100644
+--- a/arch/mips/ralink/Makefile
++++ b/arch/mips/ralink/Makefile
+@@ -6,16 +6,21 @@
+ # Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
+ # Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+
+-obj-y := prom.o of.o reset.o clk.o irq.o timer.o
++obj-y := prom.o of.o reset.o clk.o timer.o
+
+ obj-$(CONFIG_CLKEVT_RT3352) += cevt-rt3352.o
+
+ obj-$(CONFIG_RALINK_ILL_ACC) += ill_acc.o
+
++obj-$(CONFIG_IRQ_INTC) += irq.o
++obj-$(CONFIG_IRQ_GIC) += irq-gic.o
++obj-$(CONFIG_MIPS_MT_SMP) += malta-amon.o
++
+ obj-$(CONFIG_SOC_RT288X) += rt288x.o
+ obj-$(CONFIG_SOC_RT305X) += rt305x.o
+ obj-$(CONFIG_SOC_RT3883) += rt3883.o
+ obj-$(CONFIG_SOC_MT7620) += mt7620.o
++obj-$(CONFIG_SOC_MT7621) += mt7621.o
+
+ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+
+diff --git a/arch/mips/ralink/Platform b/arch/mips/ralink/Platform
+index 6d9c8c4..6095fcc 100644
+--- a/arch/mips/ralink/Platform
++++ b/arch/mips/ralink/Platform
+@@ -27,3 +27,8 @@ cflags-$(CONFIG_SOC_RT3883) += -I$(srctree)/arch/mips/include/asm/mach-ralink/rt
+ #
+ load-$(CONFIG_SOC_MT7620) += 0xffffffff80000000
+ cflags-$(CONFIG_SOC_MT7620) += -I$(srctree)/arch/mips/include/asm/mach-ralink/mt7620
++
++# Ralink MT7621
++#
++load-$(CONFIG_SOC_MT7621) += 0xffffffff80001000
++cflags-$(CONFIG_SOC_MT7621) += -I$(srctree)/arch/mips/include/asm/mach-ralink/mt7621
+diff --git a/arch/mips/ralink/irq-gic.c b/arch/mips/ralink/irq-gic.c
+new file mode 100644
+index 0000000..0122d42
+--- /dev/null
++++ b/arch/mips/ralink/irq-gic.c
+@@ -0,0 +1,271 @@
++#include <linux/init.h>
++#include <linux/sched.h>
++#include <linux/slab.h>
++#include <linux/interrupt.h>
++#include <linux/kernel_stat.h>
++#include <linux/hardirq.h>
++#include <linux/preempt.h>
++#include <linux/irqdomain.h>
++#include <linux/of_platform.h>
++#include <linux/of_address.h>
++#include <linux/of_irq.h>
++
++#include <asm/irq_cpu.h>
++#include <asm/mipsregs.h>
++
++#include <asm/irq.h>
++#include <asm/setup.h>
++
++#include <asm/gic.h>
++#include <asm/gcmpregs.h>
++
++#include <asm/mach-ralink/mt7621.h>
++
++unsigned long _gcmp_base;
++static int gic_resched_int_base = 56;
++static int gic_call_int_base = 60;
++static struct irq_chip *irq_gic;
++static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS];
++
++#if defined(CONFIG_MIPS_MT_SMP)
++static int gic_resched_int_base;
++static int gic_call_int_base;
++
++#define GIC_RESCHED_INT(cpu) (gic_resched_int_base+(cpu))
++#define GIC_CALL_INT(cpu) (gic_call_int_base+(cpu))
++
++static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id)
++{
++ scheduler_ipi();
++
++ return IRQ_HANDLED;
++}
++
++static irqreturn_t
++ipi_call_interrupt(int irq, void *dev_id)
++{
++ smp_call_function_interrupt();
++
++ return IRQ_HANDLED;
++}
++
++static struct irqaction irq_resched = {
++ .handler = ipi_resched_interrupt,
++ .flags = IRQF_DISABLED|IRQF_PERCPU,
++ .name = "ipi resched"
++};
++
++static struct irqaction irq_call = {
++ .handler = ipi_call_interrupt,
++ .flags = IRQF_DISABLED|IRQF_PERCPU,
++ .name = "ipi call"
++};
++
++#endif
++
++static void __init
++gic_fill_map(void)
++{
++ int i;
++
++ for (i = 0; i < ARRAY_SIZE(gic_intr_map); i++) {
++ gic_intr_map[i].cpunum = 0;
++ gic_intr_map[i].pin = GIC_CPU_INT0;
++ gic_intr_map[i].polarity = GIC_POL_POS;
++ gic_intr_map[i].trigtype = GIC_TRIG_LEVEL;
++ gic_intr_map[i].flags = GIC_FLAG_IPI;
++ }
++
++#if defined(CONFIG_MIPS_MT_SMP)
++ {
++ int cpu;
++
++ gic_call_int_base = ARRAY_SIZE(gic_intr_map) - nr_cpu_ids;
++ gic_resched_int_base = gic_call_int_base - nr_cpu_ids;
++
++ i = gic_resched_int_base;
++
++ for (cpu = 0; cpu < nr_cpu_ids; cpu++) {
++ gic_intr_map[i + cpu].cpunum = cpu;
++ gic_intr_map[i + cpu].pin = GIC_CPU_INT1;
++ gic_intr_map[i + cpu].trigtype = GIC_TRIG_EDGE;
++
++ gic_intr_map[i + cpu + nr_cpu_ids].cpunum = cpu;
++ gic_intr_map[i + cpu + nr_cpu_ids].pin = GIC_CPU_INT2;
++ gic_intr_map[i + cpu + nr_cpu_ids].trigtype = GIC_TRIG_EDGE;
++ }
++ }
++#endif
++}
++
++void
++gic_irq_ack(struct irq_data *d)
++{
++ int irq = (d->irq - gic_irq_base);
++
++ GIC_CLR_INTR_MASK(irq);
++
++ if (gic_irq_flags[irq] & GIC_TRIG_EDGE)
++ GICWRITE(GIC_REG(SHARED, GIC_SH_WEDGE), irq);
++}
++
++void
++gic_finish_irq(struct irq_data *d)
++{
++ GIC_SET_INTR_MASK(d->irq - gic_irq_base);
++}
++
++void __init
++gic_platform_init(int irqs, struct irq_chip *irq_controller)
++{
++ irq_gic = irq_controller;
++}
++
++static void
++gic_irqdispatch(void)
++{
++ unsigned int irq = gic_get_int();
++
++ if (likely(irq < GIC_NUM_INTRS))
++ do_IRQ(MIPS_GIC_IRQ_BASE + irq);
++ else {
++ pr_err("Spurious GIC Interrupt!\n");
++ spurious_interrupt();
++ }
++
++}
++
++static void
++vi_timer_irqdispatch(void)
++{
++ do_IRQ(cp0_compare_irq);
++}
++
++#if defined(CONFIG_MIPS_MT_SMP)
++unsigned int
++plat_ipi_call_int_xlate(unsigned int cpu)
++{
++ return GIC_CALL_INT(cpu);
++}
++
++unsigned int
++plat_ipi_resched_int_xlate(unsigned int cpu)
++{
++ return GIC_RESCHED_INT(cpu);
++}
++#endif
++
++asmlinkage void
++plat_irq_dispatch(void)
++{
++ unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
++
++ if (unlikely(!pending)) {
++ pr_err("Spurious CP0 Interrupt!\n");
++ spurious_interrupt();
++ } else {
++ if (pending & CAUSEF_IP7)
++ do_IRQ(cp0_compare_irq);
++
++ if (pending & (CAUSEF_IP4 | CAUSEF_IP3 | CAUSEF_IP2))
++ gic_irqdispatch();
++ }
++}
++
++unsigned int __cpuinit
++get_c0_compare_int(void)
++{
++ return CP0_LEGACY_COMPARE_IRQ;
++}
++
++static int
++gic_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
++{
++ irq_set_chip_and_handler(irq, irq_gic,
++#if defined(CONFIG_MIPS_MT_SMP)
++ (hw >= gic_resched_int_base) ?
++ handle_percpu_irq :
++#endif
++ handle_level_irq);
++
++ return 0;
++}
++
++static const struct irq_domain_ops irq_domain_ops = {
++ .xlate = irq_domain_xlate_onecell,
++ .map = gic_map,
++};
++
++static int __init
++of_gic_init(struct device_node *node,
++ struct device_node *parent)
++{
++ struct irq_domain *domain;
++ struct resource gcmp = { 0 }, gic = { 0 };
++ unsigned int gic_rev;
++ int i;
++
++ if (of_address_to_resource(node, 0, &gic))
++ panic("Failed to get gic memory range");
++ if (request_mem_region(gic.start, resource_size(&gic),
++ gic.name) < 0)
++ panic("Failed to request gic memory");
++ if (of_address_to_resource(node, 2, &gcmp))
++ panic("Failed to get gic memory range");
++ if (request_mem_region(gcmp.start, resource_size(&gcmp),
++ gcmp.name) < 0)
++ panic("Failed to request gcmp memory");
++
++ _gcmp_base = (unsigned long) ioremap_nocache(gcmp.start, resource_size(&gcmp));
++ if (!_gcmp_base)
++ panic("Failed to remap gcmp memory\n");
++
++ if ((GCMPGCB(GCMPB) & GCMP_GCB_GCMPB_GCMPBASE_MSK) != gcmp.start)
++ panic("Failed to find gcmp core\n");
++
++ /* tell the gcmp where to find the gic */
++ GCMPGCB(GICBA) = gic.start | GCMP_GCB_GICBA_EN_MSK;
++ gic_present = 1;
++ if (cpu_has_vint) {
++ set_vi_handler(2, gic_irqdispatch);
++ set_vi_handler(3, gic_irqdispatch);
++ set_vi_handler(4, gic_irqdispatch);
++ set_vi_handler(7, vi_timer_irqdispatch);
++ }
++
++ gic_fill_map();
++
++ gic_init(gic.start, resource_size(&gic), gic_intr_map,
++ ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE);
++
++ GICREAD(GIC_REG(SHARED, GIC_SH_REVISIONID), gic_rev);
++ pr_info("gic: revision %d.%d\n", (gic_rev >> 8) & 0xff, gic_rev & 0xff);
++
++ domain = irq_domain_add_legacy(node, GIC_NUM_INTRS, MIPS_GIC_IRQ_BASE,
++ 0, &irq_domain_ops, NULL);
++ if (!domain)
++ panic("Failed to add irqdomain");
++
++#if defined(CONFIG_MIPS_MT_SMP)
++ for (i = 0; i < nr_cpu_ids; i++) {
++ setup_irq(MIPS_GIC_IRQ_BASE + GIC_RESCHED_INT(i), &irq_resched);
++ setup_irq(MIPS_GIC_IRQ_BASE + GIC_CALL_INT(i), &irq_call);
++ }
++#endif
++
++ change_c0_status(ST0_IM, STATUSF_IP7 | STATUSF_IP4 | STATUSF_IP3 |
++ STATUSF_IP2);
++ return 0;
++}
++
++static struct of_device_id __initdata of_irq_ids[] = {
++ { .compatible = "mti,cpu-interrupt-controller", .data = mips_cpu_intc_init },
++ { .compatible = "ralink,mt7621-gic", .data = of_gic_init },
++ {},
++};
++
++void __init
++arch_init_irq(void)
++{
++ of_irq_init(of_irq_ids);
++}
+diff --git a/arch/mips/ralink/malta-amon.c b/arch/mips/ralink/malta-amon.c
+new file mode 100644
+index 0000000..1e47844
+--- /dev/null
++++ b/arch/mips/ralink/malta-amon.c
+@@ -0,0 +1,81 @@
++/*
++ * Copyright (C) 2007 MIPS Technologies, Inc.
++ * All rights reserved.
++
++ * This program is free software; you can distribute it and/or modify it
++ * under the terms of the GNU General Public License (Version 2) as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++ *
++ * Arbitrary Monitor interface
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/smp.h>
++
++#include <asm/addrspace.h>
++#include <asm/mips-boards/launch.h>
++#include <asm/mipsmtregs.h>
++
++int amon_cpu_avail(int cpu)
++{
++ struct cpulaunch *launch = (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH);
++
++ if (cpu < 0 || cpu >= NCPULAUNCH) {
++ pr_debug("avail: cpu%d is out of range\n", cpu);
++ return 0;
++ }
++
++ launch += cpu;
++ if (!(launch->flags & LAUNCH_FREADY)) {
++ pr_debug("avail: cpu%d is not ready\n", cpu);
++ return 0;
++ }
++ if (launch->flags & (LAUNCH_FGO|LAUNCH_FGONE)) {
++ pr_debug("avail: too late.. cpu%d is already gone\n", cpu);
++ return 0;
++ }
++
++ return 1;
++}
++
++void amon_cpu_start(int cpu,
++ unsigned long pc, unsigned long sp,
++ unsigned long gp, unsigned long a0)
++{
++ volatile struct cpulaunch *launch =
++ (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH);
++
++ if (!amon_cpu_avail(cpu))
++ return;
++ if (cpu == smp_processor_id()) {
++ pr_debug("launch: I am cpu%d!\n", cpu);
++ return;
++ }
++ launch += cpu;
++
++ pr_debug("launch: starting cpu%d\n", cpu);
++
++ launch->pc = pc;
++ launch->gp = gp;
++ launch->sp = sp;
++ launch->a0 = a0;
++
++ smp_wmb(); /* Target must see parameters before go */
++ launch->flags |= LAUNCH_FGO;
++ smp_wmb(); /* Target must see go before we poll */
++
++ while ((launch->flags & LAUNCH_FGONE) == 0)
++ ;
++ smp_rmb(); /* Target will be updating flags soon */
++ pr_debug("launch: cpu%d gone!\n", cpu);
++}
+diff --git a/arch/mips/ralink/mt7621.c b/arch/mips/ralink/mt7621.c
+new file mode 100644
+index 0000000..2aac87c
+--- /dev/null
++++ b/arch/mips/ralink/mt7621.c
+@@ -0,0 +1,183 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * Parts of this file are based on Ralink's 2.6.21 BSP
++ *
++ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <asm/gcmpregs.h>
++
++#include <asm/mipsregs.h>
++#include <asm/smp-ops.h>
++#include <asm/mach-ralink/ralink_regs.h>
++#include <asm/mach-ralink/mt7621.h>
++
++#include <pinmux.h>
++
++#include "common.h"
++
++#define SYSC_REG_SYSCFG 0x10
++#define SYSC_REG_CPLL_CLKCFG0 0x2c
++#define SYSC_REG_CUR_CLK_STS 0x44
++#define CPU_CLK_SEL (BIT(30) | BIT(31))
++
++#define MT7621_GPIO_MODE_UART1 1
++#define MT7621_GPIO_MODE_I2C 2
++#define MT7621_GPIO_MODE_UART2 3
++#define MT7621_GPIO_MODE_UART3 5
++#define MT7621_GPIO_MODE_JTAG 7
++#define MT7621_GPIO_MODE_WDT_MASK 0x3
++#define MT7621_GPIO_MODE_WDT_SHIFT 8
++#define MT7621_GPIO_MODE_WDT_GPIO 1
++#define MT7621_GPIO_MODE_PCIE_RST 0
++#define MT7621_GPIO_MODE_PCIE_REF 2
++#define MT7621_GPIO_MODE_PCIE_MASK 0x3
++#define MT7621_GPIO_MODE_PCIE_SHIFT 10
++#define MT7621_GPIO_MODE_PCIE_GPIO 1
++#define MT7621_GPIO_MODE_MDIO 12
++#define MT7621_GPIO_MODE_RGMII1 14
++#define MT7621_GPIO_MODE_RGMII2 15
++#define MT7621_GPIO_MODE_SPI_MASK 0x3
++#define MT7621_GPIO_MODE_SPI_SHIFT 16
++#define MT7621_GPIO_MODE_SPI_GPIO 1
++#define MT7621_GPIO_MODE_SDHCI_MASK 0x3
++#define MT7621_GPIO_MODE_SDHCI_SHIFT 18
++#define MT7621_GPIO_MODE_SDHCI_GPIO 1
++
++static struct rt2880_pmx_func uart1_grp[] = { FUNC("uart1", 0, 1, 2) };
++static struct rt2880_pmx_func i2c_grp[] = { FUNC("i2c", 0, 3, 2) };
++static struct rt2880_pmx_func uart3_grp[] = { FUNC("uart3", 0, 5, 4) };
++static struct rt2880_pmx_func uart2_grp[] = { FUNC("uart2", 0, 9, 4) };
++static struct rt2880_pmx_func jtag_grp[] = { FUNC("jtag", 0, 13, 5) };
++static struct rt2880_pmx_func wdt_grp[] = {
++ FUNC("wdt rst", 0, 18, 1),
++ FUNC("wdt refclk", 2, 18, 1),
++};
++static struct rt2880_pmx_func pcie_rst_grp[] = {
++ FUNC("pcie rst", MT7621_GPIO_MODE_PCIE_RST, 19, 1),
++ FUNC("pcie refclk", MT7621_GPIO_MODE_PCIE_REF, 19, 1)
++};
++static struct rt2880_pmx_func mdio_grp[] = { FUNC("mdio", 0, 20, 2) };
++static struct rt2880_pmx_func rgmii2_grp[] = { FUNC("rgmii2", 0, 22, 12) };
++static struct rt2880_pmx_func spi_grp[] = {
++ FUNC("spi", 0, 34, 7),
++ FUNC("nand", 2, 34, 8),
++};
++static struct rt2880_pmx_func sdhci_grp[] = {
++ FUNC("sdhci", 0, 41, 8),
++ FUNC("nand", 2, 41, 8),
++};
++static struct rt2880_pmx_func rgmii1_grp[] = { FUNC("rgmii1", 0, 49, 12) };
++
++static struct rt2880_pmx_group mt7621_pinmux_data[] = {
++ GRP("uart1", uart1_grp, 1, MT7621_GPIO_MODE_UART1),
++ GRP("i2c", i2c_grp, 1, MT7621_GPIO_MODE_I2C),
++ GRP("uart3", uart2_grp, 1, MT7621_GPIO_MODE_UART2),
++ GRP("uart2", uart3_grp, 1, MT7621_GPIO_MODE_UART3),
++ GRP("jtag", jtag_grp, 1, MT7621_GPIO_MODE_JTAG),
++ GRP_G("wdt", wdt_grp, MT7621_GPIO_MODE_WDT_MASK,
++ MT7621_GPIO_MODE_WDT_GPIO, MT7621_GPIO_MODE_WDT_SHIFT),
++ GRP_G("pcie", pcie_rst_grp, MT7621_GPIO_MODE_PCIE_MASK,
++ MT7621_GPIO_MODE_PCIE_GPIO, MT7621_GPIO_MODE_PCIE_SHIFT),
++ GRP("mdio", mdio_grp, 1, MT7621_GPIO_MODE_MDIO),
++ GRP("rgmii2", rgmii2_grp, 1, MT7621_GPIO_MODE_RGMII2),
++ GRP_G("spi", spi_grp, MT7621_GPIO_MODE_SPI_MASK,
++ MT7621_GPIO_MODE_SPI_GPIO, MT7621_GPIO_MODE_SPI_SHIFT),
++ GRP_G("sdhci", sdhci_grp, MT7621_GPIO_MODE_SDHCI_MASK,
++ MT7621_GPIO_MODE_SDHCI_GPIO, MT7621_GPIO_MODE_SDHCI_SHIFT),
++ GRP("rgmii1", rgmii1_grp, 1, MT7621_GPIO_MODE_RGMII1),
++ { 0 }
++};
++
++void __init ralink_clk_init(void)
++{
++ int cpu_fdiv = 0;
++ int cpu_ffrac = 0;
++ int fbdiv = 0;
++ u32 clk_sts, syscfg;
++ u8 clk_sel = 0, xtal_mode;
++ u32 cpu_clk;
++
++ if ((rt_sysc_r32(SYSC_REG_CPLL_CLKCFG0) & CPU_CLK_SEL) != 0)
++ clk_sel = 1;
++
++ switch (clk_sel) {
++ case 0:
++ clk_sts = rt_sysc_r32(SYSC_REG_CUR_CLK_STS);
++ cpu_fdiv = ((clk_sts >> 8) & 0x1F);
++ cpu_ffrac = (clk_sts & 0x1F);
++ cpu_clk = (500 * cpu_ffrac / cpu_fdiv) * 1000 * 1000;
++ break;
++
++ case 1:
++ fbdiv = ((rt_sysc_r32(0x648) >> 4) & 0x7F) + 1;
++ syscfg = rt_sysc_r32(SYSC_REG_SYSCFG);
++ xtal_mode = (syscfg >> 6) & 0x7;
++ if(xtal_mode >= 6) { //25Mhz Xtal
++ cpu_clk = 25 * fbdiv * 1000 * 1000;
++ } else if(xtal_mode >=3) { //40Mhz Xtal
++ cpu_clk = 40 * fbdiv * 1000 * 1000;
++ } else { // 20Mhz Xtal
++ cpu_clk = 20 * fbdiv * 1000 * 1000;
++ }
++ break;
++ }
++ cpu_clk = 880000000;
++ ralink_clk_add("cpu", cpu_clk);
++ ralink_clk_add("1e000b00.spi", 50000000);
++ ralink_clk_add("1e000c00.uartlite", 50000000);
++ ralink_clk_add("1e000d00.uart", 50000000);
++}
++
++void __init ralink_of_remap(void)
++{
++ rt_sysc_membase = plat_of_remap_node("mtk,mt7621-sysc");
++ rt_memc_membase = plat_of_remap_node("mtk,mt7621-memc");
++
++ if (!rt_sysc_membase || !rt_memc_membase)
++ panic("Failed to remap core resources");
++}
++
++void prom_soc_init(struct ralink_soc_info *soc_info)
++{
++ void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7621_SYSC_BASE);
++ unsigned char *name = NULL;
++ u32 n0;
++ u32 n1;
++ u32 rev;
++
++ n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
++ n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
++
++ if (n0 == MT7621_CHIP_NAME0 && n1 == MT7621_CHIP_NAME1) {
++ name = "MT7621";
++ soc_info->compatible = "mtk,mt7621-soc";
++ } else {
++ panic("mt7621: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
++ }
++
++ rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
++
++ snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
++ "Mediatek %s ver:%u eco:%u",
++ name,
++ (rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK,
++ (rev & CHIP_REV_ECO_MASK));
++
++ soc_info->mem_size_min = MT7621_DDR2_SIZE_MIN;
++ soc_info->mem_size_max = MT7621_DDR2_SIZE_MAX;
++ soc_info->mem_base = MT7621_DRAM_BASE;
++
++ rt2880_pinmux_data = mt7621_pinmux_data;
++
++ if (register_cmp_smp_ops())
++ panic("failed to register_vsmp_smp_ops()");
++}
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0013-MIPS-ralink-add-MT7621-defconfig.patch b/target/linux/ramips/patches-3.14/0013-MIPS-ralink-add-MT7621-defconfig.patch
new file mode 100644
index 0000000000..831f2a7730
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0013-MIPS-ralink-add-MT7621-defconfig.patch
@@ -0,0 +1,217 @@
+From 8f92eac5ace0f834ec069b4bb8e9ad38f162de0e Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 27 Jan 2014 13:12:41 +0000
+Subject: [PATCH 13/57] MIPS: ralink: add MT7621 defconfig
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/configs/mt7621_defconfig | 197 ++++++++++++++++++++++++++++++++++++
+ 1 file changed, 197 insertions(+)
+ create mode 100644 arch/mips/configs/mt7621_defconfig
+
+diff --git a/arch/mips/configs/mt7621_defconfig b/arch/mips/configs/mt7621_defconfig
+new file mode 100644
+index 0000000..7719471
+--- /dev/null
++++ b/arch/mips/configs/mt7621_defconfig
+@@ -0,0 +1,197 @@
++# CONFIG_LOCALVERSION_AUTO is not set
++CONFIG_SYSVIPC=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_RCU_FANOUT=32
++CONFIG_UIDGID_STRICT_TYPE_CHECKS=y
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE="/openwrt/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/root-ramips /openwrt/trunk/target/linux/generic/image/initramfs-base-files.txt"
++CONFIG_INITRAMFS_ROOT_UID=1000
++CONFIG_INITRAMFS_ROOT_GID=1000
++# CONFIG_RD_GZIP is not set
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++# CONFIG_AIO is not set
++CONFIG_EMBEDDED=y
++# CONFIG_VM_EVENT_COUNTERS is not set
++# CONFIG_SLUB_DEBUG is not set
++# CONFIG_COMPAT_BRK is not set
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_BLK_DEV_BSG is not set
++CONFIG_PARTITION_ADVANCED=y
++# CONFIG_IOSCHED_CFQ is not set
++CONFIG_SMP=y
++CONFIG_NR_CPUS=4
++CONFIG_SCHED_SMT=y
++# CONFIG_COMPACTION is not set
++# CONFIG_CROSS_MEMORY_ATTACH is not set
++# CONFIG_SECCOMP is not set
++CONFIG_HZ_100=y
++CONFIG_CMDLINE_BOOL=y
++CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
++# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++CONFIG_IP_ADVANCED_ROUTER=y
++CONFIG_IP_MULTIPLE_TABLES=y
++CONFIG_IP_ROUTE_MULTIPATH=y
++CONFIG_IP_ROUTE_VERBOSE=y
++CONFIG_IP_MROUTE=y
++CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
++CONFIG_ARPD=y
++CONFIG_SYN_COOKIES=y
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++CONFIG_TCP_CONG_ADVANCED=y
++# CONFIG_TCP_CONG_BIC is not set
++# CONFIG_TCP_CONG_WESTWOOD is not set
++# CONFIG_TCP_CONG_HTCP is not set
++CONFIG_IPV6_PRIVACY=y
++# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET6_XFRM_MODE_BEET is not set
++# CONFIG_IPV6_SIT is not set
++CONFIG_IPV6_MULTIPLE_TABLES=y
++CONFIG_IPV6_SUBTREES=y
++CONFIG_IPV6_MROUTE=y
++CONFIG_NETFILTER=y
++# CONFIG_BRIDGE_NETFILTER is not set
++CONFIG_NF_CONNTRACK=m
++CONFIG_NF_CONNTRACK_FTP=m
++CONFIG_NF_CONNTRACK_IRC=m
++CONFIG_NETFILTER_XT_MARK=m
++CONFIG_NETFILTER_XT_TARGET_LOG=m
++CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
++CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
++CONFIG_NETFILTER_XT_MATCH_COMMENT=m
++CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
++CONFIG_NETFILTER_XT_MATCH_LIMIT=m
++CONFIG_NETFILTER_XT_MATCH_MAC=m
++CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
++CONFIG_NETFILTER_XT_MATCH_STATE=m
++CONFIG_NETFILTER_XT_MATCH_TIME=m
++CONFIG_NF_CONNTRACK_IPV4=m
++# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
++CONFIG_IP_NF_IPTABLES=m
++CONFIG_IP_NF_FILTER=m
++CONFIG_IP_NF_TARGET_REJECT=m
++CONFIG_NF_NAT_IPV4=m
++CONFIG_IP_NF_TARGET_MASQUERADE=m
++CONFIG_IP_NF_TARGET_REDIRECT=m
++CONFIG_IP_NF_MANGLE=m
++CONFIG_IP_NF_RAW=m
++CONFIG_NF_CONNTRACK_IPV6=m
++CONFIG_IP6_NF_IPTABLES=m
++CONFIG_IP6_NF_MATCH_AH=m
++CONFIG_IP6_NF_MATCH_EUI64=m
++CONFIG_IP6_NF_MATCH_FRAG=m
++CONFIG_IP6_NF_MATCH_OPTS=m
++CONFIG_IP6_NF_MATCH_IPV6HEADER=m
++CONFIG_IP6_NF_MATCH_MH=m
++CONFIG_IP6_NF_MATCH_RT=m
++CONFIG_IP6_NF_FILTER=m
++CONFIG_IP6_NF_TARGET_REJECT=m
++CONFIG_IP6_NF_MANGLE=m
++CONFIG_IP6_NF_RAW=m
++CONFIG_BRIDGE=m
++# CONFIG_BRIDGE_IGMP_SNOOPING is not set
++CONFIG_VLAN_8021Q=y
++CONFIG_NET_SCHED=y
++CONFIG_NET_SCH_FQ_CODEL=y
++CONFIG_HAMRADIO=y
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++# CONFIG_FIRMWARE_IN_KERNEL is not set
++CONFIG_MTD=y
++CONFIG_MTD_CMDLINE_PARTS=y
++CONFIG_MTD_BLOCK=y
++CONFIG_MTD_CFI=y
++CONFIG_MTD_CFI_AMDSTD=y
++CONFIG_MTD_COMPLEX_MAPPINGS=y
++CONFIG_MTD_PHYSMAP=y
++CONFIG_MTD_M25P80=y
++CONFIG_EEPROM_93CX6=m
++CONFIG_SCSI=y
++CONFIG_BLK_DEV_SD=y
++CONFIG_NETDEVICES=y
++# CONFIG_NET_PACKET_ENGINE is not set
++# CONFIG_NET_VENDOR_WIZNET is not set
++CONFIG_PHYLIB=y
++CONFIG_SWCONFIG=y
++CONFIG_PPP=m
++CONFIG_PPP_FILTER=y
++CONFIG_PPP_MULTILINK=y
++CONFIG_PPPOE=m
++CONFIG_PPP_ASYNC=m
++CONFIG_ISDN=y
++# CONFIG_INPUT is not set
++# CONFIG_SERIO is not set
++# CONFIG_VT is not set
++# CONFIG_LEGACY_PTYS is not set
++# CONFIG_DEVKMEM is not set
++CONFIG_SERIAL_8250=y
++# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
++CONFIG_SERIAL_8250_CONSOLE=y
++# CONFIG_SERIAL_8250_PCI is not set
++CONFIG_SERIAL_8250_RUNTIME_UARTS=2
++CONFIG_SPI=y
++CONFIG_GPIOLIB=y
++CONFIG_GPIO_SYSFS=y
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++CONFIG_WATCHDOG_CORE=y
++# CONFIG_VGA_ARB is not set
++CONFIG_USB=y
++CONFIG_USB_XHCI_HCD=y
++CONFIG_USB_XHCI_PLATFORM=y
++CONFIG_USB_MT7621_XHCI_PLATFORM=y
++CONFIG_USB_STORAGE=y
++CONFIG_USB_PHY=y
++CONFIG_NEW_LEDS=y
++CONFIG_LEDS_CLASS=y
++CONFIG_LEDS_GPIO=m
++CONFIG_LEDS_TRIGGERS=y
++CONFIG_LEDS_TRIGGER_TIMER=y
++CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
++CONFIG_STAGING=y
++CONFIG_USB_DWC2=m
++# CONFIG_IOMMU_SUPPORT is not set
++CONFIG_RESET_CONTROLLER=y
++# CONFIG_FIRMWARE_MEMMAP is not set
++# CONFIG_DNOTIFY is not set
++# CONFIG_PROC_PAGE_MONITOR is not set
++CONFIG_TMPFS=y
++CONFIG_TMPFS_XATTR=y
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_SUMMARY=y
++CONFIG_JFFS2_FS_XATTR=y
++# CONFIG_JFFS2_FS_POSIX_ACL is not set
++# CONFIG_JFFS2_FS_SECURITY is not set
++CONFIG_JFFS2_COMPRESSION_OPTIONS=y
++# CONFIG_JFFS2_ZLIB is not set
++CONFIG_SQUASHFS=y
++# CONFIG_SQUASHFS_ZLIB is not set
++CONFIG_SQUASHFS_XZ=y
++CONFIG_PRINTK_TIME=y
++# CONFIG_ENABLE_MUST_CHECK is not set
++CONFIG_FRAME_WARN=1024
++CONFIG_MAGIC_SYSRQ=y
++CONFIG_STRIP_ASM_SYMS=y
++# CONFIG_UNUSED_SYMBOLS is not set
++CONFIG_DEBUG_FS=y
++# CONFIG_SCHED_DEBUG is not set
++CONFIG_DEBUG_INFO=y
++CONFIG_DEBUG_INFO_REDUCED=y
++CONFIG_RCU_CPU_STALL_TIMEOUT=60
++# CONFIG_FTRACE is not set
++CONFIG_CRYPTO_ARC4=m
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
++# CONFIG_VIRTUALIZATION is not set
++CONFIG_CRC_ITU_T=m
++CONFIG_CRC32_SARWATE=y
++# CONFIG_XZ_DEC_X86 is not set
++CONFIG_AVERAGE=y
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0014-MIPS-ralink-add-MT7621-dts-file.patch b/target/linux/ramips/patches-3.14/0014-MIPS-ralink-add-MT7621-dts-file.patch
new file mode 100644
index 0000000000..460a33c893
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0014-MIPS-ralink-add-MT7621-dts-file.patch
@@ -0,0 +1,311 @@
+From 34e2a5ededc6140f311b3b3c88edf4e18e88126a Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 24 Jan 2014 17:01:22 +0100
+Subject: [PATCH 14/57] MIPS: ralink: add MT7621 dts file
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/dts/Makefile | 1 +
+ arch/mips/ralink/dts/mt7621.dtsi | 257 ++++++++++++++++++++++++++++++++++
+ arch/mips/ralink/dts/mt7621_eval.dts | 16 +++
+ 3 files changed, 274 insertions(+)
+ create mode 100644 arch/mips/ralink/dts/mt7621.dtsi
+ create mode 100644 arch/mips/ralink/dts/mt7621_eval.dts
+
+diff --git a/arch/mips/ralink/dts/Makefile b/arch/mips/ralink/dts/Makefile
+index 18194fa..9742c73 100644
+--- a/arch/mips/ralink/dts/Makefile
++++ b/arch/mips/ralink/dts/Makefile
+@@ -2,3 +2,4 @@ obj-$(CONFIG_DTB_RT2880_EVAL) := rt2880_eval.dtb.o
+ obj-$(CONFIG_DTB_RT305X_EVAL) := rt3052_eval.dtb.o
+ obj-$(CONFIG_DTB_RT3883_EVAL) := rt3883_eval.dtb.o
+ obj-$(CONFIG_DTB_MT7620A_EVAL) := mt7620a_eval.dtb.o
++obj-$(CONFIG_DTB_MT7621_EVAL) := mt7621_eval.dtb.o
+diff --git a/arch/mips/ralink/dts/mt7621.dtsi b/arch/mips/ralink/dts/mt7621.dtsi
+new file mode 100644
+index 0000000..6db2c57
+--- /dev/null
++++ b/arch/mips/ralink/dts/mt7621.dtsi
+@@ -0,0 +1,257 @@
++/ {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ compatible = "ralink,mtk7620a-soc";
++
++ cpus {
++ cpu@0 {
++ compatible = "mips,mips24KEc";
++ };
++ };
++
++ cpuintc: cpuintc@0 {
++ #address-cells = <0>;
++ #interrupt-cells = <1>;
++ interrupt-controller;
++ compatible = "mti,cpu-interrupt-controller";
++ };
++
++ palmbus@1E000000 {
++ compatible = "palmbus";
++ reg = <0x1E000000 0x100000>;
++ ranges = <0x0 0x1E000000 0x0FFFFF>;
++
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ sysc@0 {
++ compatible = "mtk,mt7621-sysc";
++ reg = <0x0 0x100>;
++ };
++
++ wdt@100 {
++ compatible = "mtk,mt7621-wdt";
++ reg = <0x100 0x100>;
++ };
++
++ gpio@600 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ compatible = "mtk,mt7621-gpio";
++ reg = <0x600 0x100>;
++
++ gpio0: bank@0 {
++ reg = <0>;
++ compatible = "mtk,mt7621-gpio-bank";
++ gpio-controller;
++ #gpio-cells = <2>;
++ };
++
++ gpio1: bank@1 {
++ reg = <1>;
++ compatible = "mtk,mt7621-gpio-bank";
++ gpio-controller;
++ #gpio-cells = <2>;
++ };
++
++ gpio2: bank@2 {
++ reg = <2>;
++ compatible = "mtk,mt7621-gpio-bank";
++ gpio-controller;
++ #gpio-cells = <2>;
++ };
++ };
++
++ memc@5000 {
++ compatible = "mtk,mt7621-memc";
++ reg = <0x300 0x100>;
++ };
++
++ uartlite@c00 {
++ compatible = "ns16550a";
++ reg = <0xc00 0x100>;
++
++ interrupt-parent = <&gic>;
++ interrupts = <26>;
++
++ reg-shift = <2>;
++ reg-io-width = <4>;
++ no-loopback-test;
++ };
++
++ uart@d00 {
++ compatible = "ns16550a";
++ reg = <0xd00 0x100>;
++
++ interrupt-parent = <&gic>;
++ interrupts = <27>;
++
++ fifo-size = <16>;
++ reg-shift = <2>;
++ reg-io-width = <4>;
++ no-loopback-test;
++ };
++
++ spi@b00 {
++ status = "okay";
++
++ compatible = "ralink,mt7621-spi";
++ reg = <0xb00 0x100>;
++
++ resets = <&rstctrl 18>;
++ reset-names = "spi";
++
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++/* pinctrl-names = "default";
++ pinctrl-0 = <&spi_pins>;*/
++
++ m25p80@0 {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ compatible = "en25q64";
++ reg = <0 0>;
++ linux,modalias = "m25p80", "en25q64";
++ spi-max-frequency = <10000000>;
++
++ m25p,chunked-io;
++
++ partition@0 {
++ label = "u-boot";
++ reg = <0x0 0x30000>;
++ read-only;
++ };
++
++ partition@30000 {
++ label = "u-boot-env";
++ reg = <0x30000 0x10000>;
++ read-only;
++ };
++
++ factory: partition@40000 {
++ label = "factory";
++ reg = <0x40000 0x10000>;
++ read-only;
++ };
++
++ partition@50000 {
++ label = "firmware";
++ reg = <0x50000 0x7a0000>;
++ };
++
++ partition@7f0000 {
++ label = "test";
++ reg = <0x7f0000 0x10000>;
++ };
++ };
++ };
++ };
++
++ rstctrl: rstctrl {
++ compatible = "ralink,rt2880-reset";
++ #reset-cells = <1>;
++ };
++
++ sdhci@1E130000 {
++ compatible = "ralink,mt7620a-sdhci";
++ reg = <0x1E130000 4000>;
++
++ interrupt-parent = <&gic>;
++ interrupts = <20>;
++ };
++
++ xhci@1E1C0000 {
++ compatible = "xhci-platform";
++ reg = <0x1E1C0000 4000>;
++
++ interrupt-parent = <&gic>;
++ interrupts = <22>;
++ };
++
++ gic: gic@1fbc0000 {
++ #address-cells = <0>;
++ #interrupt-cells = <1>;
++ interrupt-controller;
++ compatible = "ralink,mt7621-gic";
++ reg = < 0x1fbc0000 0x80 /* gic */
++ 0x1fbf0000 0x8000 /* cpc */
++ 0x1fbf8000 0x8000 /* gpmc */
++ >;
++ };
++
++ nand@1e003000 {
++ compatible = "mtk,mt7621-nand";
++ bank-width = <2>;
++ reg = <0x1e003000 0x800
++ 0x1e003800 0x800>;
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ partition@0 {
++ label = "uboot";
++ reg = <0x00000 0x80000>; /* 64 KB */
++ };
++ partition@80000 {
++ label = "uboot_env";
++ reg = <0x80000 0x80000>; /* 64 KB */
++ };
++ partition@100000 {
++ label = "factory";
++ reg = <0x100000 0x40000>;
++ };
++ partition@140000 {
++ label = "rootfs";
++ reg = <0x140000 0xec0000>;
++ };
++ };
++
++ ethernet@1e100000 {
++ compatible = "ralink,mt7621-eth";
++ reg = <0x1e100000 10000>;
++
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ ralink,port-map = "llllw";
++
++ interrupt-parent = <&gic>;
++ interrupts = <3>;
++
++/* resets = <&rstctrl 21 &rstctrl 23>;
++ reset-names = "fe", "esw";
++
++ port@4 {
++ compatible = "ralink,mt7620a-gsw-port", "ralink,eth-port";
++ reg = <4>;
++
++ status = "disabled";
++ };
++
++ port@5 {
++ compatible = "ralink,mt7620a-gsw-port", "ralink,eth-port";
++ reg = <5>;
++
++ status = "disabled";
++ };
++*/
++ mdio-bus {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ phy1f: ethernet-phy@1f {
++ reg = <0x1f>;
++ phy-mode = "rgmii";
++
++/* interrupt-parent = <&gic>;
++ interrupts = <23>;
++*/ };
++ };
++ };
++
++ gsw@1e110000 {
++ compatible = "ralink,mt7620a-gsw";
++ reg = <0x1e110000 8000>;
++ };
++};
+diff --git a/arch/mips/ralink/dts/mt7621_eval.dts b/arch/mips/ralink/dts/mt7621_eval.dts
+new file mode 100644
+index 0000000..834f59c
+--- /dev/null
++++ b/arch/mips/ralink/dts/mt7621_eval.dts
+@@ -0,0 +1,16 @@
++/dts-v1/;
++
++/include/ "mt7621.dtsi"
++
++/ {
++ compatible = "ralink,mt7621-eval-board", "ralink,mt7621-soc";
++ model = "Ralink MT7621 evaluation board";
++
++ memory@0 {
++ reg = <0x0 0x2000000>;
++ };
++
++ chosen {
++ bootargs = "console=ttyS0,57600";
++ };
++};
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0015-MIPS-ralink-cleanup-early_printk.patch b/target/linux/ramips/patches-3.14/0015-MIPS-ralink-cleanup-early_printk.patch
new file mode 100644
index 0000000000..a874c4aeb6
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0015-MIPS-ralink-cleanup-early_printk.patch
@@ -0,0 +1,84 @@
+From e410b0069ee7c318a5b556f39b8b16814330a208 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 24 Jan 2014 17:01:17 +0100
+Subject: [PATCH 15/57] MIPS: ralink: cleanup early_printk
+
+Add support for the new MT7621/8 SoC and kill ifdefs.
+Cleanup some whitespace error while we are at it.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/early_printk.c | 45 ++++++++++++++++++++++++++-------------
+ 1 file changed, 30 insertions(+), 15 deletions(-)
+
+diff --git a/arch/mips/ralink/early_printk.c b/arch/mips/ralink/early_printk.c
+index b46d041..255d695 100644
+--- a/arch/mips/ralink/early_printk.c
++++ b/arch/mips/ralink/early_printk.c
+@@ -12,21 +12,24 @@
+ #include <asm/addrspace.h>
+
+ #ifdef CONFIG_SOC_RT288X
+-#define EARLY_UART_BASE 0x300c00
++#define EARLY_UART_BASE 0x300c00
++#define CHIPID_BASE 0x300004
++#elif defined(CONFIG_SOC_MT7621)
++#define EARLY_UART_BASE 0x1E000c00
++#define CHIPID_BASE 0x1E000004
+ #else
+-#define EARLY_UART_BASE 0x10000c00
++#define EARLY_UART_BASE 0x10000c00
++#define CHIPID_BASE 0x10000004
+ #endif
+
+-#define UART_REG_RX 0x00
+-#define UART_REG_TX 0x04
+-#define UART_REG_IER 0x08
+-#define UART_REG_IIR 0x0c
+-#define UART_REG_FCR 0x10
+-#define UART_REG_LCR 0x14
+-#define UART_REG_MCR 0x18
+-#define UART_REG_LSR 0x1c
++#define MT7628_CHIP_NAME1 0x20203832
++
++#define UART_REG_TX 0x04
++#define UART_REG_LSR 0x14
++#define UART_REG_LSR_RT2880 0x1c
+
+ static __iomem void *uart_membase = (__iomem void *) KSEG1ADDR(EARLY_UART_BASE);
++static __iomem void *chipid_membase = (__iomem void *) KSEG1ADDR(CHIPID_BASE);
+
+ static inline void uart_w32(u32 val, unsigned reg)
+ {
+@@ -38,11 +41,23 @@ static inline u32 uart_r32(unsigned reg)
+ return __raw_readl(uart_membase + reg);
+ }
+
++static inline int soc_is_mt7628(void)
++{
++ return IS_ENABLED(CONFIG_SOC_MT7620) &&
++ (__raw_readl(chipid_membase) == MT7628_CHIP_NAME1);
++}
++
+ void prom_putchar(unsigned char ch)
+ {
+- while ((uart_r32(UART_REG_LSR) & UART_LSR_THRE) == 0)
+- ;
+- uart_w32(ch, UART_REG_TX);
+- while ((uart_r32(UART_REG_LSR) & UART_LSR_THRE) == 0)
+- ;
++ if (IS_ENABLED(CONFIG_SOC_MT7621) || soc_is_mt7628()) {
++ uart_w32(ch, UART_TX);
++ while ((uart_r32(UART_REG_LSR) & UART_LSR_THRE) == 0)
++ ;
++ } else {
++ while ((uart_r32(UART_REG_LSR_RT2880) & UART_LSR_THRE) == 0)
++ ;
++ uart_w32(ch, UART_REG_TX);
++ while ((uart_r32(UART_REG_LSR_RT2880) & UART_LSR_THRE) == 0)
++ ;
++ }
+ }
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0016-MIPS-ralink-add-MT7621-pcie-driver.patch b/target/linux/ramips/patches-3.14/0016-MIPS-ralink-add-MT7621-pcie-driver.patch
new file mode 100644
index 0000000000..7b73575215
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0016-MIPS-ralink-add-MT7621-pcie-driver.patch
@@ -0,0 +1,830 @@
+From 95d7eb13a864ef666cea7f0e86349e86d80d28ce Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 16 Mar 2014 05:22:39 +0000
+Subject: [PATCH 16/57] MIPS: ralink: add MT7621 pcie driver
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/pci/Makefile | 1 +
+ arch/mips/pci/pci-mt7621.c | 797 ++++++++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 798 insertions(+)
+ create mode 100644 arch/mips/pci/pci-mt7621.c
+
+diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
+index 137f2a6..d054bc8 100644
+--- a/arch/mips/pci/Makefile
++++ b/arch/mips/pci/Makefile
+@@ -41,6 +41,7 @@ obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1480.o pci-bcm1480ht.o
+ obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o
+ obj-$(CONFIG_LANTIQ) += fixup-lantiq.o
+ obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o
++obj-$(CONFIG_SOC_MT7621) += pci-mt7621.o
+ obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o
+ obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
+ obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o
+diff --git a/arch/mips/pci/pci-mt7621.c b/arch/mips/pci/pci-mt7621.c
+new file mode 100644
+index 0000000..0b58fce
+--- /dev/null
++++ b/arch/mips/pci/pci-mt7621.c
+@@ -0,0 +1,797 @@
++/**************************************************************************
++ *
++ * BRIEF MODULE DESCRIPTION
++ * PCI init for Ralink RT2880 solution
++ *
++ * Copyright 2007 Ralink Inc. (bruce_chang@ralinktech.com.tw)
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 675 Mass Ave, Cambridge, MA 02139, USA.
++ *
++ *
++ **************************************************************************
++ * May 2007 Bruce Chang
++ * Initial Release
++ *
++ * May 2009 Bruce Chang
++ * support RT2880/RT3883 PCIe
++ *
++ * May 2011 Bruce Chang
++ * support RT6855/MT7620 PCIe
++ *
++ **************************************************************************
++ */
++
++#include <linux/types.h>
++#include <linux/pci.h>
++#include <linux/kernel.h>
++#include <linux/slab.h>
++#include <linux/version.h>
++#include <asm/pci.h>
++#include <asm/io.h>
++//#include <asm/mach-ralink/eureka_ep430.h>
++#include <linux/init.h>
++#include <linux/mod_devicetable.h>
++#include <linux/delay.h>
++//#include <asm/rt2880/surfboardint.h>
++
++#include <ralink_regs.h>
++
++extern void pcie_phy_init(void);
++extern void chk_phy_pll(void);
++
++/*
++ * These functions and structures provide the BIOS scan and mapping of the PCI
++ * devices.
++ */
++
++#define CONFIG_PCIE_PORT0
++#define CONFIG_PCIE_PORT1
++#define CONFIG_PCIE_PORT2
++#define RALINK_PCIE0_CLK_EN (1<<24)
++#define RALINK_PCIE1_CLK_EN (1<<25)
++#define RALINK_PCIE2_CLK_EN (1<<26)
++
++#define RALINK_PCI_CONFIG_ADDR 0x20
++#define RALINK_PCI_CONFIG_DATA_VIRTUAL_REG 0x24
++#define SURFBOARDINT_PCIE0 12 /* PCIE0 */
++#define RALINK_INT_PCIE0 SURFBOARDINT_PCIE0
++#define RALINK_INT_PCIE1 SURFBOARDINT_PCIE1
++#define RALINK_INT_PCIE2 SURFBOARDINT_PCIE2
++#define SURFBOARDINT_PCIE1 32 /* PCIE1 */
++#define SURFBOARDINT_PCIE2 33 /* PCIE2 */
++#define RALINK_PCI_MEMBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x0028)
++#define RALINK_PCI_IOBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x002C)
++#define RALINK_PCIE0_RST (1<<24)
++#define RALINK_PCIE1_RST (1<<25)
++#define RALINK_PCIE2_RST (1<<26)
++#define RALINK_SYSCTL_BASE 0xBE000000
++
++#define RALINK_PCI_PCICFG_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0000)
++#define RALINK_PCI_PCIMSK_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x000C)
++#define RALINK_PCI_BASE 0xBE140000
++
++#define RALINK_PCIEPHY_P0P1_CTL_OFFSET (RALINK_PCI_BASE + 0x9000)
++#define RT6855_PCIE0_OFFSET 0x2000
++#define RT6855_PCIE1_OFFSET 0x3000
++#define RT6855_PCIE2_OFFSET 0x4000
++
++#define RALINK_PCI0_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0010)
++#define RALINK_PCI0_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0018)
++#define RALINK_PCI0_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0030)
++#define RALINK_PCI0_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0034)
++#define RALINK_PCI0_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0038)
++#define RALINK_PCI0_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0050)
++#define RALINK_PCI0_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0060)
++#define RALINK_PCI0_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0064)
++
++#define RALINK_PCI1_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0010)
++#define RALINK_PCI1_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0018)
++#define RALINK_PCI1_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0030)
++#define RALINK_PCI1_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0034)
++#define RALINK_PCI1_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0038)
++#define RALINK_PCI1_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0050)
++#define RALINK_PCI1_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0060)
++#define RALINK_PCI1_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0064)
++
++#define RALINK_PCI2_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0010)
++#define RALINK_PCI2_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0018)
++#define RALINK_PCI2_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0030)
++#define RALINK_PCI2_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0034)
++#define RALINK_PCI2_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0038)
++#define RALINK_PCI2_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0050)
++#define RALINK_PCI2_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0060)
++#define RALINK_PCI2_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0064)
++
++#define RALINK_PCIEPHY_P0P1_CTL_OFFSET (RALINK_PCI_BASE + 0x9000)
++#define RALINK_PCIEPHY_P2_CTL_OFFSET (RALINK_PCI_BASE + 0xA000)
++
++
++#define MV_WRITE(ofs, data) \
++ *(volatile u32 *)(RALINK_PCI_BASE+(ofs)) = cpu_to_le32(data)
++#define MV_READ(ofs, data) \
++ *(data) = le32_to_cpu(*(volatile u32 *)(RALINK_PCI_BASE+(ofs)))
++#define MV_READ_DATA(ofs) \
++ le32_to_cpu(*(volatile u32 *)(RALINK_PCI_BASE+(ofs)))
++
++#define MV_WRITE_16(ofs, data) \
++ *(volatile u16 *)(RALINK_PCI_BASE+(ofs)) = cpu_to_le16(data)
++#define MV_READ_16(ofs, data) \
++ *(data) = le16_to_cpu(*(volatile u16 *)(RALINK_PCI_BASE+(ofs)))
++
++#define MV_WRITE_8(ofs, data) \
++ *(volatile u8 *)(RALINK_PCI_BASE+(ofs)) = data
++#define MV_READ_8(ofs, data) \
++ *(data) = *(volatile u8 *)(RALINK_PCI_BASE+(ofs))
++
++
++
++#define RALINK_PCI_MM_MAP_BASE 0x60000000
++#define RALINK_PCI_IO_MAP_BASE 0x1e160000
++
++#define RALINK_SYSTEM_CONTROL_BASE 0xbe000000
++#define GPIO_PERST
++#define ASSERT_SYSRST_PCIE(val) do { \
++ if (*(unsigned int *)(0xbe00000c) == 0x00030101) \
++ RALINK_RSTCTRL |= val; \
++ else \
++ RALINK_RSTCTRL &= ~val; \
++ } while(0)
++#define DEASSERT_SYSRST_PCIE(val) do { \
++ if (*(unsigned int *)(0xbe00000c) == 0x00030101) \
++ RALINK_RSTCTRL &= ~val; \
++ else \
++ RALINK_RSTCTRL |= val; \
++ } while(0)
++#define RALINK_SYSCFG1 *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x14)
++#define RALINK_CLKCFG1 *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x30)
++#define RALINK_RSTCTRL *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x34)
++#define RALINK_GPIOMODE *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x60)
++#define RALINK_PCIE_CLK_GEN *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x7c)
++#define RALINK_PCIE_CLK_GEN1 *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x80)
++#define PPLL_CFG1 *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x9c)
++#define PPLL_DRV *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0xa0)
++//RALINK_SYSCFG1 bit
++#define RALINK_PCI_HOST_MODE_EN (1<<7)
++#define RALINK_PCIE_RC_MODE_EN (1<<8)
++//RALINK_RSTCTRL bit
++#define RALINK_PCIE_RST (1<<23)
++#define RALINK_PCI_RST (1<<24)
++//RALINK_CLKCFG1 bit
++#define RALINK_PCI_CLK_EN (1<<19)
++#define RALINK_PCIE_CLK_EN (1<<21)
++//RALINK_GPIOMODE bit
++#define PCI_SLOTx2 (1<<11)
++#define PCI_SLOTx1 (2<<11)
++//MTK PCIE PLL bit
++#define PDRV_SW_SET (1<<31)
++#define LC_CKDRVPD_ (1<<19)
++
++#define MEMORY_BASE 0x0
++int pcie_link_status = 0;
++
++void __inline__ read_config(unsigned long bus, unsigned long dev, unsigned long func, unsigned long reg, unsigned long *val);
++void __inline__ write_config(unsigned long bus, unsigned long dev, unsigned long func, unsigned long reg, unsigned long val);
++
++#define PCI_ACCESS_READ_1 0
++#define PCI_ACCESS_READ_2 1
++#define PCI_ACCESS_READ_4 2
++#define PCI_ACCESS_WRITE_1 3
++#define PCI_ACCESS_WRITE_2 4
++#define PCI_ACCESS_WRITE_4 5
++
++static int config_access(unsigned char access_type, struct pci_bus *bus,
++ unsigned int devfn, unsigned int where, u32 * data)
++{
++ unsigned int slot = PCI_SLOT(devfn);
++ u8 func = PCI_FUNC(devfn);
++ uint32_t address_reg, data_reg;
++ unsigned int address;
++
++ address_reg = RALINK_PCI_CONFIG_ADDR;
++ data_reg = RALINK_PCI_CONFIG_DATA_VIRTUAL_REG;
++
++ address = (((where&0xF00)>>8)<<24) |(bus->number << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | 0x80000000;
++ MV_WRITE(address_reg, address);
++
++ switch(access_type) {
++ case PCI_ACCESS_WRITE_1:
++ MV_WRITE_8(data_reg+(where&0x3), *data);
++ break;
++ case PCI_ACCESS_WRITE_2:
++ MV_WRITE_16(data_reg+(where&0x3), *data);
++ break;
++ case PCI_ACCESS_WRITE_4:
++ MV_WRITE(data_reg, *data);
++ break;
++ case PCI_ACCESS_READ_1:
++ MV_READ_8( data_reg+(where&0x3), data);
++ break;
++ case PCI_ACCESS_READ_2:
++ MV_READ_16(data_reg+(where&0x3), data);
++ break;
++ case PCI_ACCESS_READ_4:
++ MV_READ(data_reg, data);
++ break;
++ default:
++ printk("no specify access type\n");
++ break;
++ }
++ return 0;
++}
++
++static int
++read_config_byte(struct pci_bus *bus, unsigned int devfn, int where, u8 * val)
++{
++ return config_access(PCI_ACCESS_READ_1, bus, devfn, (unsigned int)where, (u32 *)val);
++}
++
++static int
++read_config_word(struct pci_bus *bus, unsigned int devfn, int where, u16 * val)
++{
++ return config_access(PCI_ACCESS_READ_2, bus, devfn, (unsigned int)where, (u32 *)val);
++}
++
++static int
++read_config_dword(struct pci_bus *bus, unsigned int devfn, int where, u32 * val)
++{
++ return config_access(PCI_ACCESS_READ_4, bus, devfn, (unsigned int)where, (u32 *)val);
++}
++
++static int
++write_config_byte(struct pci_bus *bus, unsigned int devfn, int where, u8 val)
++{
++ if (config_access(PCI_ACCESS_WRITE_1, bus, devfn, (unsigned int)where, (u32 *)&val))
++ return -1;
++
++ return PCIBIOS_SUCCESSFUL;
++}
++
++static int
++write_config_word(struct pci_bus *bus, unsigned int devfn, int where, u16 val)
++{
++ if (config_access(PCI_ACCESS_WRITE_2, bus, devfn, where, (u32 *)&val))
++ return -1;
++
++ return PCIBIOS_SUCCESSFUL;
++}
++
++static int
++write_config_dword(struct pci_bus *bus, unsigned int devfn, int where, u32 val)
++{
++ if (config_access(PCI_ACCESS_WRITE_4, bus, devfn, where, &val))
++ return -1;
++
++ return PCIBIOS_SUCCESSFUL;
++}
++
++
++static int
++pci_config_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val)
++{
++ switch (size) {
++ case 1:
++ return read_config_byte(bus, devfn, where, (u8 *) val);
++ case 2:
++ return read_config_word(bus, devfn, where, (u16 *) val);
++ default:
++ return read_config_dword(bus, devfn, where, val);
++ }
++}
++
++static int
++pci_config_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val)
++{
++ switch (size) {
++ case 1:
++ return write_config_byte(bus, devfn, where, (u8) val);
++ case 2:
++ return write_config_word(bus, devfn, where, (u16) val);
++ default:
++ return write_config_dword(bus, devfn, where, val);
++ }
++}
++
++struct pci_ops rt2880_pci_ops= {
++ .read = pci_config_read,
++ .write = pci_config_write,
++};
++
++static struct resource rt2880_res_pci_mem1 = {
++ .name = "PCI MEM1",
++ .start = RALINK_PCI_MM_MAP_BASE,
++ .end = (u32)((RALINK_PCI_MM_MAP_BASE + (unsigned char *)0x0fffffff)),
++ .flags = IORESOURCE_MEM,
++};
++static struct resource rt2880_res_pci_io1 = {
++ .name = "PCI I/O1",
++ .start = RALINK_PCI_IO_MAP_BASE,
++ .end = (u32)((RALINK_PCI_IO_MAP_BASE + (unsigned char *)0x0ffff)),
++ .flags = IORESOURCE_IO,
++};
++
++struct pci_controller rt2880_controller = {
++ .pci_ops = &rt2880_pci_ops,
++ .mem_resource = &rt2880_res_pci_mem1,
++ .io_resource = &rt2880_res_pci_io1,
++ .mem_offset = 0x00000000UL,
++ .io_offset = 0x00000000UL,
++ .io_map_base = 0xa0000000,
++};
++
++void __inline__
++read_config(unsigned long bus, unsigned long dev, unsigned long func, unsigned long reg, unsigned long *val)
++{
++ unsigned int address_reg, data_reg, address;
++
++ address_reg = RALINK_PCI_CONFIG_ADDR;
++ data_reg = RALINK_PCI_CONFIG_DATA_VIRTUAL_REG;
++ address = (((reg & 0xF00)>>8)<<24) | (bus << 16) | (dev << 11) | (func << 8) | (reg & 0xfc) | 0x80000000 ;
++ MV_WRITE(address_reg, address);
++ MV_READ(data_reg, val);
++ return;
++}
++
++void __inline__
++write_config(unsigned long bus, unsigned long dev, unsigned long func, unsigned long reg, unsigned long val)
++{
++ unsigned int address_reg, data_reg, address;
++
++ address_reg = RALINK_PCI_CONFIG_ADDR;
++ data_reg = RALINK_PCI_CONFIG_DATA_VIRTUAL_REG;
++ address = (((reg & 0xF00)>>8)<<24) | (bus << 16) | (dev << 11) | (func << 8) | (reg & 0xfc) | 0x80000000 ;
++ MV_WRITE(address_reg, address);
++ MV_WRITE(data_reg, val);
++ return;
++}
++
++
++int __init
++pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
++{
++ u16 cmd;
++ u32 val;
++ int irq = 0;
++
++ if ((dev->bus->number == 0) && (slot == 0)) {
++ write_config(0, 0, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE);
++ read_config(0, 0, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val);
++ printk("BAR0 at slot 0 = %x\n", val);
++ printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
++ } else if((dev->bus->number == 0) && (slot == 0x1)) {
++ write_config(0, 1, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE);
++ read_config(0, 1, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val);
++ printk("BAR0 at slot 1 = %x\n", val);
++ printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
++ } else if((dev->bus->number == 0) && (slot == 0x2)) {
++ write_config(0, 2, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE);
++ read_config(0, 2, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val);
++ printk("BAR0 at slot 2 = %x\n", val);
++ printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
++ } else if ((dev->bus->number == 1) && (slot == 0x0)) {
++ switch (pcie_link_status) {
++ case 2:
++ case 6:
++ irq = RALINK_INT_PCIE1;
++ break;
++ case 4:
++ irq = RALINK_INT_PCIE2;
++ break;
++ default:
++ irq = RALINK_INT_PCIE0;
++ }
++ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
++ } else if ((dev->bus->number == 2) && (slot == 0x0)) {
++ switch (pcie_link_status) {
++ case 5:
++ case 6:
++ irq = RALINK_INT_PCIE2;
++ break;
++ default:
++ irq = RALINK_INT_PCIE1;
++ }
++ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
++ } else if ((dev->bus->number == 2) && (slot == 0x1)) {
++ switch (pcie_link_status) {
++ case 5:
++ case 6:
++ irq = RALINK_INT_PCIE2;
++ break;
++ default:
++ irq = RALINK_INT_PCIE1;
++ }
++ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
++ } else if ((dev->bus->number ==3) && (slot == 0x0)) {
++ irq = RALINK_INT_PCIE2;
++ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
++ } else if ((dev->bus->number ==3) && (slot == 0x1)) {
++ irq = RALINK_INT_PCIE2;
++ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
++ } else if ((dev->bus->number ==3) && (slot == 0x2)) {
++ irq = RALINK_INT_PCIE2;
++ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
++ } else {
++ printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
++ return 0;
++ }
++
++ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0x14); //configure cache line size 0x14
++ pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xFF); //configure latency timer 0x10
++ pci_read_config_word(dev, PCI_COMMAND, &cmd);
++ cmd = cmd | PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
++ pci_write_config_word(dev, PCI_COMMAND, cmd);
++ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
++ return irq;
++}
++
++void
++set_pcie_phy(u32 *addr, int start_b, int bits, int val)
++{
++// printk("0x%p:", addr);
++// printk(" %x", *addr);
++ *(unsigned int *)(addr) &= ~(((1<<bits) - 1)<<start_b);
++ *(unsigned int *)(addr) |= val << start_b;
++// printk(" -> %x\n", *addr);
++}
++
++void
++bypass_pipe_rst(void)
++{
++#if defined (CONFIG_PCIE_PORT0)
++ /* PCIe Port 0 */
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x02c), 12, 1, 0x01); // rg_pe1_pipe_rst_b
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x02c), 4, 1, 0x01); // rg_pe1_pipe_cmd_frc[4]
++#endif
++#if defined (CONFIG_PCIE_PORT1)
++ /* PCIe Port 1 */
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x12c), 12, 1, 0x01); // rg_pe1_pipe_rst_b
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x12c), 4, 1, 0x01); // rg_pe1_pipe_cmd_frc[4]
++#endif
++#if defined (CONFIG_PCIE_PORT2)
++ /* PCIe Port 2 */
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x02c), 12, 1, 0x01); // rg_pe1_pipe_rst_b
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x02c), 4, 1, 0x01); // rg_pe1_pipe_cmd_frc[4]
++#endif
++}
++
++void
++set_phy_for_ssc(void)
++{
++ unsigned long reg = (*(volatile u32 *)(RALINK_SYSCTL_BASE + 0x10));
++
++ reg = (reg >> 6) & 0x7;
++#if defined (CONFIG_PCIE_PORT0) || defined (CONFIG_PCIE_PORT1)
++ /* Set PCIe Port0 & Port1 PHY to disable SSC */
++ /* Debug Xtal Type */
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x400), 8, 1, 0x01); // rg_pe1_frc_h_xtal_type
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x400), 9, 2, 0x00); // rg_pe1_h_xtal_type
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000), 4, 1, 0x01); // rg_pe1_frc_phy_en //Force Port 0 enable control
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100), 4, 1, 0x01); // rg_pe1_frc_phy_en //Force Port 1 enable control
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000), 5, 1, 0x00); // rg_pe1_phy_en //Port 0 disable
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100), 5, 1, 0x00); // rg_pe1_phy_en //Port 1 disable
++ if(reg <= 5 && reg >= 3) { // 40MHz Xtal
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 6, 2, 0x01); // RG_PE1_H_PLL_PREDIV //Pre-divider ratio (for host mode)
++ printk("***** Xtal 40MHz *****\n");
++ } else { // 25MHz | 20MHz Xtal
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 6, 2, 0x00); // RG_PE1_H_PLL_PREDIV //Pre-divider ratio (for host mode)
++ if (reg >= 6) {
++ printk("***** Xtal 25MHz *****\n");
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4bc), 4, 2, 0x01); // RG_PE1_H_PLL_FBKSEL //Feedback clock select
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x49c), 0,31, 0x18000000); // RG_PE1_H_LCDDS_PCW_NCPO //DDS NCPO PCW (for host mode)
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a4), 0,16, 0x18d); // RG_PE1_H_LCDDS_SSC_PRD //DDS SSC dither period control
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a8), 0,12, 0x4a); // RG_PE1_H_LCDDS_SSC_DELTA //DDS SSC dither amplitude control
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a8), 16,12, 0x4a); // RG_PE1_H_LCDDS_SSC_DELTA1 //DDS SSC dither amplitude control for initial
++ } else {
++ printk("***** Xtal 20MHz *****\n");
++ }
++ }
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a0), 5, 1, 0x01); // RG_PE1_LCDDS_CLK_PH_INV //DDS clock inversion
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 22, 2, 0x02); // RG_PE1_H_PLL_BC
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 18, 4, 0x06); // RG_PE1_H_PLL_BP
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 12, 4, 0x02); // RG_PE1_H_PLL_IR
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 8, 4, 0x01); // RG_PE1_H_PLL_IC
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4ac), 16, 3, 0x00); // RG_PE1_H_PLL_BR
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 1, 3, 0x02); // RG_PE1_PLL_DIVEN
++ if(reg <= 5 && reg >= 3) { // 40MHz Xtal
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x414), 6, 2, 0x01); // rg_pe1_mstckdiv //value of da_pe1_mstckdiv when force mode enable
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x414), 5, 1, 0x01); // rg_pe1_frc_mstckdiv //force mode enable of da_pe1_mstckdiv
++ }
++ /* Enable PHY and disable force mode */
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000), 5, 1, 0x01); // rg_pe1_phy_en //Port 0 enable
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100), 5, 1, 0x01); // rg_pe1_phy_en //Port 1 enable
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000), 4, 1, 0x00); // rg_pe1_frc_phy_en //Force Port 0 disable control
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100), 4, 1, 0x00); // rg_pe1_frc_phy_en //Force Port 1 disable control
++#endif
++#if defined (CONFIG_PCIE_PORT2)
++ /* Set PCIe Port2 PHY to disable SSC */
++ /* Debug Xtal Type */
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x400), 8, 1, 0x01); // rg_pe1_frc_h_xtal_type
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x400), 9, 2, 0x00); // rg_pe1_h_xtal_type
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000), 4, 1, 0x01); // rg_pe1_frc_phy_en //Force Port 0 enable control
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000), 5, 1, 0x00); // rg_pe1_phy_en //Port 0 disable
++ if(reg <= 5 && reg >= 3) { // 40MHz Xtal
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 6, 2, 0x01); // RG_PE1_H_PLL_PREDIV //Pre-divider ratio (for host mode)
++ } else { // 25MHz | 20MHz Xtal
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 6, 2, 0x00); // RG_PE1_H_PLL_PREDIV //Pre-divider ratio (for host mode)
++ if (reg >= 6) { // 25MHz Xtal
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4bc), 4, 2, 0x01); // RG_PE1_H_PLL_FBKSEL //Feedback clock select
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x49c), 0,31, 0x18000000); // RG_PE1_H_LCDDS_PCW_NCPO //DDS NCPO PCW (for host mode)
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a4), 0,16, 0x18d); // RG_PE1_H_LCDDS_SSC_PRD //DDS SSC dither period control
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a8), 0,12, 0x4a); // RG_PE1_H_LCDDS_SSC_DELTA //DDS SSC dither amplitude control
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a8), 16,12, 0x4a); // RG_PE1_H_LCDDS_SSC_DELTA1 //DDS SSC dither amplitude control for initial
++ }
++ }
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a0), 5, 1, 0x01); // RG_PE1_LCDDS_CLK_PH_INV //DDS clock inversion
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 22, 2, 0x02); // RG_PE1_H_PLL_BC
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 18, 4, 0x06); // RG_PE1_H_PLL_BP
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 12, 4, 0x02); // RG_PE1_H_PLL_IR
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 8, 4, 0x01); // RG_PE1_H_PLL_IC
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4ac), 16, 3, 0x00); // RG_PE1_H_PLL_BR
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 1, 3, 0x02); // RG_PE1_PLL_DIVEN
++ if(reg <= 5 && reg >= 3) { // 40MHz Xtal
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x414), 6, 2, 0x01); // rg_pe1_mstckdiv //value of da_pe1_mstckdiv when force mode enable
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x414), 5, 1, 0x01); // rg_pe1_frc_mstckdiv //force mode enable of da_pe1_mstckdiv
++ }
++ /* Enable PHY and disable force mode */
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000), 5, 1, 0x01); // rg_pe1_phy_en //Port 0 enable
++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000), 4, 1, 0x00); // rg_pe1_frc_phy_en //Force Port 0 disable control
++#endif
++}
++
++int init_rt2880pci(void)
++{
++ unsigned long val = 0;
++ iomem_resource.start = 0;
++ iomem_resource.end= ~0;
++ ioport_resource.start= 0;
++ ioport_resource.end = ~0;
++
++#if defined (CONFIG_PCIE_PORT0)
++ val = RALINK_PCIE0_RST;
++#endif
++#if defined (CONFIG_PCIE_PORT1)
++ val |= RALINK_PCIE1_RST;
++#endif
++#if defined (CONFIG_PCIE_PORT2)
++ val |= RALINK_PCIE2_RST;
++#endif
++ DEASSERT_SYSRST_PCIE(val);
++ printk("release PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL);
++
++ bypass_pipe_rst();
++ set_phy_for_ssc();
++ ASSERT_SYSRST_PCIE(RALINK_PCIE0_RST | RALINK_PCIE1_RST | RALINK_PCIE2_RST);
++ printk("pull PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL);
++#if defined GPIO_PERST /* add GPIO control instead of PERST_N */ /*chhung*/
++ *(unsigned int *)(0xbe000060) &= ~(0x3<<10 | 0x3<<3);
++ *(unsigned int *)(0xbe000060) |= 0x1<<10 | 0x1<<3;
++ mdelay(100);
++ *(unsigned int *)(0xbe000600) |= 0x1<<19 | 0x1<<8 | 0x1<<7; // use GPIO19/GPIO8/GPIO7 (PERST_N/UART_RXD3/UART_TXD3)
++ mdelay(100);
++ *(unsigned int *)(0xbe000620) &= ~(0x1<<19 | 0x1<<8 | 0x1<<7); // clear DATA
++
++ mdelay(100);
++#else
++ *(unsigned int *)(0xbe000060) &= ~0x00000c00;
++#endif
++#if defined (CONFIG_PCIE_PORT0)
++ val = RALINK_PCIE0_RST;
++#endif
++#if defined (CONFIG_PCIE_PORT1)
++ val |= RALINK_PCIE1_RST;
++#endif
++#if defined (CONFIG_PCIE_PORT2)
++ val |= RALINK_PCIE2_RST;
++#endif
++ DEASSERT_SYSRST_PCIE(val);
++ printk("release PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL);
++#if defined (CONFIG_PCIE_PORT0)
++ read_config(0, 0, 0, 0x70c, &val);
++ val &= ~(0xff)<<8;
++ val |= 0x50<<8;
++ write_config(0, 0, 0, 0x70c, val);
++#endif
++#if defined (CONFIG_PCIE_PORT1)
++ read_config(0, 1, 0, 0x70c, &val);
++ val &= ~(0xff)<<8;
++ val |= 0x50<<8;
++ write_config(0, 1, 0, 0x70c, val);
++#endif
++#if defined (CONFIG_PCIE_PORT2)
++ read_config(0, 2, 0, 0x70c, &val);
++ val &= ~(0xff)<<8;
++ val |= 0x50<<8;
++ write_config(0, 2, 0, 0x70c, val);
++#endif
++
++#if defined (CONFIG_PCIE_PORT0)
++ read_config(0, 0, 0, 0x70c, &val);
++ printk("Port 0 N_FTS = %x\n", (unsigned int)val);
++#endif
++#if defined (CONFIG_PCIE_PORT1)
++ read_config(0, 1, 0, 0x70c, &val);
++ printk("Port 1 N_FTS = %x\n", (unsigned int)val);
++#endif
++#if defined (CONFIG_PCIE_PORT2)
++ read_config(0, 2, 0, 0x70c, &val);
++ printk("Port 2 N_FTS = %x\n", (unsigned int)val);
++#endif
++
++ RALINK_RSTCTRL = (RALINK_RSTCTRL | RALINK_PCIE_RST);
++ RALINK_SYSCFG1 &= ~(0x30);
++ RALINK_SYSCFG1 |= (2<<4);
++ RALINK_PCIE_CLK_GEN &= 0x7fffffff;
++ RALINK_PCIE_CLK_GEN1 &= 0x80ffffff;
++ RALINK_PCIE_CLK_GEN1 |= 0xa << 24;
++ RALINK_PCIE_CLK_GEN |= 0x80000000;
++ mdelay(50);
++ RALINK_RSTCTRL = (RALINK_RSTCTRL & ~RALINK_PCIE_RST);
++
++
++#if defined GPIO_PERST /* add GPIO control instead of PERST_N */ /*chhung*/
++ *(unsigned int *)(0xbe000620) |= 0x1<<19 | 0x1<<8 | 0x1<<7; // set DATA
++ mdelay(100);
++#else
++ RALINK_PCI_PCICFG_ADDR &= ~(1<<1); //de-assert PERST
++#endif
++ mdelay(500);
++
++
++ mdelay(500);
++#if defined (CONFIG_PCIE_PORT0)
++ if(( RALINK_PCI0_STATUS & 0x1) == 0)
++ {
++ printk("PCIE0 no card, disable it(RST&CLK)\n");
++ ASSERT_SYSRST_PCIE(RALINK_PCIE0_RST);
++ RALINK_CLKCFG1 = (RALINK_CLKCFG1 & ~RALINK_PCIE0_CLK_EN);
++ pcie_link_status &= ~(1<<0);
++ } else {
++ pcie_link_status |= 1<<0;
++ RALINK_PCI_PCIMSK_ADDR |= (1<<20); // enable pcie1 interrupt
++ }
++#endif
++#if defined (CONFIG_PCIE_PORT1)
++ if(( RALINK_PCI1_STATUS & 0x1) == 0)
++ {
++ printk("PCIE1 no card, disable it(RST&CLK)\n");
++ ASSERT_SYSRST_PCIE(RALINK_PCIE1_RST);
++ RALINK_CLKCFG1 = (RALINK_CLKCFG1 & ~RALINK_PCIE1_CLK_EN);
++ pcie_link_status &= ~(1<<1);
++ } else {
++ pcie_link_status |= 1<<1;
++ RALINK_PCI_PCIMSK_ADDR |= (1<<21); // enable pcie1 interrupt
++ }
++#endif
++#if defined (CONFIG_PCIE_PORT2)
++ if (( RALINK_PCI2_STATUS & 0x1) == 0) {
++ printk("PCIE2 no card, disable it(RST&CLK)\n");
++ ASSERT_SYSRST_PCIE(RALINK_PCIE2_RST);
++ RALINK_CLKCFG1 = (RALINK_CLKCFG1 & ~RALINK_PCIE2_CLK_EN);
++ pcie_link_status &= ~(1<<2);
++ } else {
++ pcie_link_status |= 1<<2;
++ RALINK_PCI_PCIMSK_ADDR |= (1<<22); // enable pcie2 interrupt
++ }
++#endif
++ if (pcie_link_status == 0)
++ return 0;
++
++/*
++pcie(2/1/0) link status pcie2_num pcie1_num pcie0_num
++3'b000 x x x
++3'b001 x x 0
++3'b010 x 0 x
++3'b011 x 1 0
++3'b100 0 x x
++3'b101 1 x 0
++3'b110 1 0 x
++3'b111 2 1 0
++*/
++ switch(pcie_link_status) {
++ case 2:
++ RALINK_PCI_PCICFG_ADDR &= ~0x00ff0000;
++ RALINK_PCI_PCICFG_ADDR |= 0x1 << 16; //port0
++ RALINK_PCI_PCICFG_ADDR |= 0x0 << 20; //port1
++ break;
++ case 4:
++ RALINK_PCI_PCICFG_ADDR &= ~0x0fff0000;
++ RALINK_PCI_PCICFG_ADDR |= 0x1 << 16; //port0
++ RALINK_PCI_PCICFG_ADDR |= 0x2 << 20; //port1
++ RALINK_PCI_PCICFG_ADDR |= 0x0 << 24; //port2
++ break;
++ case 5:
++ RALINK_PCI_PCICFG_ADDR &= ~0x0fff0000;
++ RALINK_PCI_PCICFG_ADDR |= 0x0 << 16; //port0
++ RALINK_PCI_PCICFG_ADDR |= 0x2 << 20; //port1
++ RALINK_PCI_PCICFG_ADDR |= 0x1 << 24; //port2
++ break;
++ case 6:
++ RALINK_PCI_PCICFG_ADDR &= ~0x0fff0000;
++ RALINK_PCI_PCICFG_ADDR |= 0x2 << 16; //port0
++ RALINK_PCI_PCICFG_ADDR |= 0x0 << 20; //port1
++ RALINK_PCI_PCICFG_ADDR |= 0x1 << 24; //port2
++ break;
++ }
++ printk(" -> %x\n", RALINK_PCI_PCICFG_ADDR);
++ //printk(" RALINK_PCI_ARBCTL = %x\n", RALINK_PCI_ARBCTL);
++
++/*
++ ioport_resource.start = rt2880_res_pci_io1.start;
++ ioport_resource.end = rt2880_res_pci_io1.end;
++*/
++
++ RALINK_PCI_MEMBASE = 0xffffffff; //RALINK_PCI_MM_MAP_BASE;
++ RALINK_PCI_IOBASE = RALINK_PCI_IO_MAP_BASE;
++
++#if defined (CONFIG_PCIE_PORT0)
++ //PCIe0
++ if((pcie_link_status & 0x1) != 0) {
++ RALINK_PCI0_BAR0SETUP_ADDR = 0x7FFF0001; //open 7FFF:2G; ENABLE
++ RALINK_PCI0_IMBASEBAR0_ADDR = MEMORY_BASE;
++ RALINK_PCI0_CLASS = 0x06040001;
++ printk("PCIE0 enabled\n");
++ }
++#endif
++#if defined (CONFIG_PCIE_PORT1)
++ //PCIe1
++ if ((pcie_link_status & 0x2) != 0) {
++ RALINK_PCI1_BAR0SETUP_ADDR = 0x7FFF0001; //open 7FFF:2G; ENABLE
++ RALINK_PCI1_IMBASEBAR0_ADDR = MEMORY_BASE;
++ RALINK_PCI1_CLASS = 0x06040001;
++ printk("PCIE1 enabled\n");
++ }
++#endif
++#if defined (CONFIG_PCIE_PORT2)
++ //PCIe2
++ if ((pcie_link_status & 0x4) != 0) {
++ RALINK_PCI2_BAR0SETUP_ADDR = 0x7FFF0001; //open 7FFF:2G; ENABLE
++ RALINK_PCI2_IMBASEBAR0_ADDR = MEMORY_BASE;
++ RALINK_PCI2_CLASS = 0x06040001;
++ printk("PCIE2 enabled\n");
++ }
++#endif
++
++
++ switch(pcie_link_status) {
++ case 7:
++ read_config(0, 2, 0, 0x4, &val);
++ write_config(0, 2, 0, 0x4, val|0x4);
++ // write_config(0, 1, 0, 0x4, val|0x7);
++ case 3:
++ case 5:
++ case 6:
++ read_config(0, 1, 0, 0x4, &val);
++ write_config(0, 1, 0, 0x4, val|0x4);
++ // write_config(0, 1, 0, 0x4, val|0x7);
++ default:
++ read_config(0, 0, 0, 0x4, &val);
++ write_config(0, 0, 0, 0x4, val|0x4); //bus master enable
++ // write_config(0, 0, 0, 0x4, val|0x7); //bus master enable
++ }
++ register_pci_controller(&rt2880_controller);
++ return 0;
++
++}
++arch_initcall(init_rt2880pci);
++
++int pcibios_plat_dev_init(struct pci_dev *dev)
++{
++ return 0;
++}
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0017-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch b/target/linux/ramips/patches-3.14/0017-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch
new file mode 100644
index 0000000000..fc9a70baa2
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0017-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch
@@ -0,0 +1,85 @@
+From f8da5caf65926d44581d4e7914b28ceab3d28a7c Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 14 Jul 2013 23:08:11 +0200
+Subject: [PATCH 17/57] MIPS: use set_mode() to enable/disable the cevt-r4k
+ irq
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/kernel/cevt-r4k.c | 37 +++++++++++++++++++++++++++++++------
+ 1 file changed, 31 insertions(+), 6 deletions(-)
+
+diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c
+index 50d3f5a..99585e6 100644
+--- a/arch/mips/kernel/cevt-r4k.c
++++ b/arch/mips/kernel/cevt-r4k.c
+@@ -38,12 +38,6 @@ static int mips_next_event(unsigned long delta,
+
+ #endif /* CONFIG_MIPS_MT_SMTC */
+
+-void mips_set_clock_mode(enum clock_event_mode mode,
+- struct clock_event_device *evt)
+-{
+- /* Nothing to do ... */
+-}
+-
+ DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device);
+ int cp0_timer_irq_installed;
+
+@@ -90,9 +84,38 @@ struct irqaction c0_compare_irqaction = {
+ .name = "timer",
+ };
+
++void mips_set_clock_mode(enum clock_event_mode mode,
++ struct clock_event_device *evt)
++{
++#ifdef CONFIG_CEVT_SYSTICK_QUIRK
++ switch (mode) {
++ case CLOCK_EVT_MODE_ONESHOT:
++ if (cp0_timer_irq_installed)
++ break;
++
++ cp0_timer_irq_installed = 1;
++
++ setup_irq(evt->irq, &c0_compare_irqaction);
++ break;
++
++ case CLOCK_EVT_MODE_SHUTDOWN:
++ if (!cp0_timer_irq_installed)
++ break;
++
++ cp0_timer_irq_installed = 0;
++ free_irq(evt->irq, &c0_compare_irqaction);
++ break;
++
++ default:
++ pr_err("Unhandeled mips clock_mode\n");
++ break;
++ }
++#endif
++}
+
+ void mips_event_handler(struct clock_event_device *dev)
+ {
++
+ }
+
+ /*
+@@ -215,12 +238,14 @@ int r4k_clockevent_init(void)
+ #endif
+ clockevents_register_device(cd);
+
++#ifndef CONFIG_CEVT_SYSTICK_QUIRK
+ if (cp0_timer_irq_installed)
+ return 0;
+
+ cp0_timer_irq_installed = 1;
+
+ setup_irq(irq, &c0_compare_irqaction);
++#endif
+
+ return 0;
+ }
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0018-MIPS-ralink-workaround-DTB-memory-issue.patch b/target/linux/ramips/patches-3.14/0018-MIPS-ralink-workaround-DTB-memory-issue.patch
new file mode 100644
index 0000000000..0f61933590
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0018-MIPS-ralink-workaround-DTB-memory-issue.patch
@@ -0,0 +1,29 @@
+From 35297af46f17092785930f32a616331c8df8f75c Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 23 May 2013 18:50:56 +0200
+Subject: [PATCH 18/57] MIPS: ralink: workaround DTB memory issue
+
+If the DTB is too big a bug happens on boot when init ram is freed.
+This is a temporary fix until the real cause is found.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/of.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
+index 1b81e8f..885cf50 100644
+--- a/arch/mips/ralink/of.c
++++ b/arch/mips/ralink/of.c
+@@ -75,7 +75,7 @@ void __init device_tree_init(void)
+ unflatten_device_tree();
+
+ /* free the space reserved for the dt blob */
+- free_bootmem(base, size);
++ //free_bootmem(base, size);
+ }
+
+ static int memory_dtb;
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0019-MIPS-ralink-add-pseudo-pwm-led-trigger-based-on-time.patch b/target/linux/ramips/patches-3.14/0019-MIPS-ralink-add-pseudo-pwm-led-trigger-based-on-time.patch
new file mode 100644
index 0000000000..cec6e8fb02
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0019-MIPS-ralink-add-pseudo-pwm-led-trigger-based-on-time.patch
@@ -0,0 +1,306 @@
+From 9de00286e20a5f5edc419698373010f1cb6ff0ce Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 27 Jul 2014 09:25:02 +0100
+Subject: [PATCH 19/57] MIPS: ralink: add pseudo pwm led trigger based on
+ timer0
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/timer.c | 213 ++++++++++++++++++++++++++++++++++++++++++----
+ 1 file changed, 197 insertions(+), 16 deletions(-)
+
+diff --git a/arch/mips/ralink/timer.c b/arch/mips/ralink/timer.c
+index e38692a..a71a7cb 100644
+--- a/arch/mips/ralink/timer.c
++++ b/arch/mips/ralink/timer.c
+@@ -12,6 +12,8 @@
+ #include <linux/timer.h>
+ #include <linux/of_gpio.h>
+ #include <linux/clk.h>
++#include <linux/leds.h>
++#include <linux/slab.h>
+
+ #include <asm/mach-ralink/ralink_regs.h>
+
+@@ -23,16 +25,34 @@
+
+ #define TMR0CTL_ENABLE BIT(7)
+ #define TMR0CTL_MODE_PERIODIC BIT(4)
+-#define TMR0CTL_PRESCALER 1
++#define TMR0CTL_PRESCALER 2
+ #define TMR0CTL_PRESCALE_VAL (0xf - TMR0CTL_PRESCALER)
+ #define TMR0CTL_PRESCALE_DIV (65536 / BIT(TMR0CTL_PRESCALER))
+
++struct rt_timer_gpio {
++ struct list_head list;
++ struct led_classdev *led;
++};
++
+ struct rt_timer {
+- struct device *dev;
+- void __iomem *membase;
+- int irq;
+- unsigned long timer_freq;
+- unsigned long timer_div;
++ struct device *dev;
++ void __iomem *membase;
++ int irq;
++
++ unsigned long timer_freq;
++ unsigned long timer_div;
++
++ struct list_head gpios;
++ struct led_trigger led_trigger;
++ unsigned int duty_cycle;
++ unsigned int duty;
++
++ unsigned int fade;
++ unsigned int fade_min;
++ unsigned int fade_max;
++ unsigned int fade_speed;
++ unsigned int fade_dir;
++ unsigned int fade_count;
+ };
+
+ static inline void rt_timer_w32(struct rt_timer *rt, u8 reg, u32 val)
+@@ -48,18 +68,46 @@ static inline u32 rt_timer_r32(struct rt_timer *rt, u8 reg)
+ static irqreturn_t rt_timer_irq(int irq, void *_rt)
+ {
+ struct rt_timer *rt = (struct rt_timer *) _rt;
++ struct rt_timer_gpio *gpio;
++ unsigned int val;
+
+- rt_timer_w32(rt, TIMER_REG_TMR0LOAD, rt->timer_freq / rt->timer_div);
++ if (rt->fade && (rt->fade_count++ > rt->fade_speed)) {
++ rt->fade_count = 0;
++ if (rt->duty_cycle <= rt->fade_min)
++ rt->fade_dir = 1;
++ else if (rt->duty_cycle >= rt->fade_max)
++ rt->fade_dir = 0;
++
++ if (rt->fade_dir)
++ rt->duty_cycle += 1;
++ else
++ rt->duty_cycle -= 1;
++
++ }
++
++ val = rt->timer_freq / rt->timer_div;
++ if (rt->duty)
++ val *= rt->duty_cycle;
++ else
++ val *= (100 - rt->duty_cycle);
++ val /= 100;
++
++ if (!list_empty(&rt->gpios))
++ list_for_each_entry(gpio, &rt->gpios, list)
++ led_set_brightness(gpio->led, !!rt->duty);
++
++ rt->duty = !rt->duty;
++
++ rt_timer_w32(rt, TIMER_REG_TMR0LOAD, val + 1);
+ rt_timer_w32(rt, TIMER_REG_TMRSTAT, TMRSTAT_TMR0INT);
+
+ return IRQ_HANDLED;
+ }
+
+-
+ static int rt_timer_request(struct rt_timer *rt)
+ {
+- int err = request_irq(rt->irq, rt_timer_irq, IRQF_DISABLED,
+- dev_name(rt->dev), rt);
++ int err = devm_request_irq(rt->dev, rt->irq, rt_timer_irq,
++ IRQF_DISABLED, dev_name(rt->dev), rt);
+ if (err) {
+ dev_err(rt->dev, "failed to request irq\n");
+ } else {
+@@ -81,8 +129,6 @@ static int rt_timer_config(struct rt_timer *rt, unsigned long divisor)
+ else
+ rt->timer_div = divisor;
+
+- rt_timer_w32(rt, TIMER_REG_TMR0LOAD, rt->timer_freq / rt->timer_div);
+-
+ return 0;
+ }
+
+@@ -108,11 +154,128 @@ static void rt_timer_disable(struct rt_timer *rt)
+ rt_timer_w32(rt, TIMER_REG_TMR0CTL, t);
+ }
+
++static ssize_t led_fade_show(struct device *dev,
++ struct device_attribute *attr, char *buf)
++{
++ struct led_classdev *led_cdev = dev_get_drvdata(dev);
++ struct rt_timer *rt = container_of(led_cdev->trigger, struct rt_timer, led_trigger);
++
++ return sprintf(buf, "speed: %d, min: %d, max: %d\n", rt->fade_speed, rt->fade_min, rt->fade_max);
++}
++
++static ssize_t led_fade_store(struct device *dev,
++ struct device_attribute *attr, const char *buf, size_t size)
++{
++ struct led_classdev *led_cdev = dev_get_drvdata(dev);
++ struct rt_timer *rt = container_of(led_cdev->trigger, struct rt_timer, led_trigger);
++ unsigned int speed = 0, min = 0, max = 0;
++ ssize_t ret = -EINVAL;
++
++ ret = sscanf(buf, "%u %u %u", &speed, &min, &max);
++
++ if (ret == 3) {
++ rt->fade_speed = speed;
++ rt->fade_min = min;
++ rt->fade_max = max;
++ rt->fade = 1;
++ } else {
++ rt->fade = 0;
++ }
++
++ return size;
++}
++
++static DEVICE_ATTR(fade, 0644, led_fade_show, led_fade_store);
++
++static ssize_t led_duty_cycle_show(struct device *dev,
++ struct device_attribute *attr, char *buf)
++{
++ struct led_classdev *led_cdev = dev_get_drvdata(dev);
++ struct rt_timer *rt = container_of(led_cdev->trigger, struct rt_timer, led_trigger);
++
++ return sprintf(buf, "%u\n", rt->duty_cycle);
++}
++
++static ssize_t led_duty_cycle_store(struct device *dev,
++ struct device_attribute *attr, const char *buf, size_t size)
++{
++ struct led_classdev *led_cdev = dev_get_drvdata(dev);
++ struct rt_timer *rt = container_of(led_cdev->trigger, struct rt_timer, led_trigger);
++ unsigned long state;
++ ssize_t ret = -EINVAL;
++
++ ret = kstrtoul(buf, 10, &state);
++ if (ret)
++ return ret;
++
++ if (state <= 100)
++ rt->duty_cycle = state;
++ else
++ rt->duty_cycle = 100;
++
++ rt->fade = 0;
++
++ return size;
++}
++
++static DEVICE_ATTR(duty_cycle, 0644, led_duty_cycle_show, led_duty_cycle_store);
++
++static void rt_timer_trig_activate(struct led_classdev *led_cdev)
++{
++ struct rt_timer *rt = container_of(led_cdev->trigger, struct rt_timer, led_trigger);
++ struct rt_timer_gpio *gpio_data;
++ int rc;
++
++ led_cdev->trigger_data = NULL;
++ gpio_data = kzalloc(sizeof(*gpio_data), GFP_KERNEL);
++ if (!gpio_data)
++ return;
++
++ rc = device_create_file(led_cdev->dev, &dev_attr_duty_cycle);
++ if (rc)
++ goto err_gpio;
++ rc = device_create_file(led_cdev->dev, &dev_attr_fade);
++ if (rc)
++ goto err_out_duty_cycle;
++
++ led_cdev->activated = true;
++ led_cdev->trigger_data = gpio_data;
++ gpio_data->led = led_cdev;
++ list_add(&gpio_data->list, &rt->gpios);
++ led_cdev->trigger_data = gpio_data;
++ rt_timer_enable(rt);
++ return;
++
++err_out_duty_cycle:
++ device_remove_file(led_cdev->dev, &dev_attr_duty_cycle);
++
++err_gpio:
++ kfree(gpio_data);
++}
++
++static void rt_timer_trig_deactivate(struct led_classdev *led_cdev)
++{
++ struct rt_timer *rt = container_of(led_cdev->trigger, struct rt_timer, led_trigger);
++ struct rt_timer_gpio *gpio_data = (struct rt_timer_gpio*) led_cdev->trigger_data;
++
++ if (led_cdev->activated) {
++ device_remove_file(led_cdev->dev, &dev_attr_duty_cycle);
++ device_remove_file(led_cdev->dev, &dev_attr_fade);
++ led_cdev->activated = false;
++ }
++
++ list_del(&gpio_data->list);
++ rt_timer_disable(rt);
++ led_set_brightness(led_cdev, LED_OFF);
++}
++
+ static int rt_timer_probe(struct platform_device *pdev)
+ {
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ const __be32 *divisor;
+ struct rt_timer *rt;
+ struct clk *clk;
++ int ret;
+
+ rt = devm_kzalloc(&pdev->dev, sizeof(*rt), GFP_KERNEL);
+ if (!rt) {
+@@ -140,12 +303,29 @@ static int rt_timer_probe(struct platform_device *pdev)
+ if (!rt->timer_freq)
+ return -EINVAL;
+
++ rt->duty_cycle = 100;
+ rt->dev = &pdev->dev;
+ platform_set_drvdata(pdev, rt);
+
+- rt_timer_request(rt);
+- rt_timer_config(rt, 2);
+- rt_timer_enable(rt);
++ ret = rt_timer_request(rt);
++ if (ret)
++ return ret;
++
++ divisor = of_get_property(pdev->dev.of_node, "ralink,divisor", NULL);
++ if (divisor)
++ rt_timer_config(rt, be32_to_cpu(*divisor));
++ else
++ rt_timer_config(rt, 200);
++
++ rt->led_trigger.name = "pwmtimer",
++ rt->led_trigger.activate = rt_timer_trig_activate,
++ rt->led_trigger.deactivate = rt_timer_trig_deactivate,
++
++ ret = led_trigger_register(&rt->led_trigger);
++ if (ret)
++ return ret;
++
++ INIT_LIST_HEAD(&rt->gpios);
+
+ dev_info(&pdev->dev, "maximum frequency is %luHz\n", rt->timer_freq);
+
+@@ -156,6 +336,7 @@ static int rt_timer_remove(struct platform_device *pdev)
+ {
+ struct rt_timer *rt = platform_get_drvdata(pdev);
+
++ led_trigger_unregister(&rt->led_trigger);
+ rt_timer_disable(rt);
+ rt_timer_free(rt);
+
+@@ -180,6 +361,6 @@ static struct platform_driver rt_timer_driver = {
+
+ module_platform_driver(rt_timer_driver);
+
+-MODULE_DESCRIPTION("Ralink RT2880 timer");
++MODULE_DESCRIPTION("Ralink RT2880 timer / pseudo pwm");
+ MODULE_AUTHOR("John Crispin <blogic@openwrt.org");
+ MODULE_LICENSE("GPL");
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0020-MIPS-ralink-update-dts-files.patch b/target/linux/ramips/patches-3.14/0020-MIPS-ralink-update-dts-files.patch
new file mode 100644
index 0000000000..52fd3211c2
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0020-MIPS-ralink-update-dts-files.patch
@@ -0,0 +1,638 @@
+From 0c1e8630dca36c2d5a9bf98a5f1f8c15f75d0253 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 12 Aug 2013 18:11:33 +0200
+Subject: [PATCH 20/57] MIPS: ralink: update dts files
+
+Add the devicetree nodes needed to make the newly merged drivers work.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/dts/mt7620a.dtsi | 135 +++++++++++++++++++++++
+ arch/mips/ralink/dts/rt3050.dtsi | 156 ++++++++++++++++++++++++++
+ arch/mips/ralink/dts/rt3883.dtsi | 219 +++++++++++++++++++++++++++++++++++++
+ 3 files changed, 510 insertions(+)
+
+diff --git a/arch/mips/ralink/dts/mt7620a.dtsi b/arch/mips/ralink/dts/mt7620a.dtsi
+index 08bf24f..df6cb79 100644
+--- a/arch/mips/ralink/dts/mt7620a.dtsi
++++ b/arch/mips/ralink/dts/mt7620a.dtsi
+@@ -29,10 +29,32 @@
+ reg = <0x0 0x100>;
+ };
+
++ timer@100 {
++ compatible = "ralink,mt7620a-timer", "ralink,rt2880-timer";
++ reg = <0x100 0x20>;
++
++ interrupt-parent = <&intc>;
++ interrupts = <1>;
++ };
++
++ watchdog@120 {
++ compatible = "ralink,mt7620a-wdt", "ralink,rt2880-wdt";
++ reg = <0x120 0x10>;
++
++ resets = <&rstctrl 8>;
++ reset-names = "wdt";
++
++ interrupt-parent = <&intc>;
++ interrupts = <1>;
++ };
++
+ intc: intc@200 {
+ compatible = "ralink,mt7620a-intc", "ralink,rt2880-intc";
+ reg = <0x200 0x100>;
+
++ resets = <&rstctrl 19>;
++ reset-names = "intc";
++
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+@@ -43,16 +65,129 @@
+ memc@300 {
+ compatible = "ralink,mt7620a-memc", "ralink,rt3050-memc";
+ reg = <0x300 0x100>;
++
++ resets = <&rstctrl 20>;
++ reset-names = "mc";
++
++ interrupt-parent = <&intc>;
++ interrupts = <3>;
++ };
++
++ uart@500 {
++ compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
++ reg = <0x500 0x100>;
++
++ resets = <&rstctrl 12>;
++ reset-names = "uart";
++
++ interrupt-parent = <&intc>;
++ interrupts = <5>;
++
++ reg-shift = <2>;
++
++ status = "disabled";
++ };
++
++ gpio0: gpio@600 {
++ compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio";
++ reg = <0x600 0x34>;
++
++ resets = <&rstctrl 13>;
++ reset-names = "pio";
++
++ interrupt-parent = <&intc>;
++ interrupts = <6>;
++
++ gpio-controller;
++ #gpio-cells = <2>;
++
++ ralink,gpio-base = <0>;
++ ralink,num-gpios = <24>;
++ ralink,register-map = [ 00 04 08 0c
++ 20 24 28 2c
++ 30 34 ];
++
++ status = "disabled";
++ };
++
++ gpio1: gpio@638 {
++ compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio";
++ reg = <0x638 0x24>;
++
++ interrupt-parent = <&intc>;
++ interrupts = <6>;
++
++ gpio-controller;
++ #gpio-cells = <2>;
++
++ ralink,gpio-base = <24>;
++ ralink,num-gpios = <16>;
++ ralink,register-map = [ 00 04 08 0c
++ 10 14 18 1c
++ 20 24 ];
++
++ status = "disabled";
++ };
++
++ gpio2: gpio@660 {
++ compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio";
++ reg = <0x660 0x24>;
++
++ interrupt-parent = <&intc>;
++ interrupts = <6>;
++
++ gpio-controller;
++ #gpio-cells = <2>;
++
++ ralink,gpio-base = <40>;
++ ralink,num-gpios = <32>;
++ ralink,register-map = [ 00 04 08 0c
++ 10 14 18 1c
++ 20 24 ];
++
++ status = "disabled";
++ };
++
++ spi@b00 {
++ compatible = "ralink,mt7620a-spi", "ralink,rt2880-spi";
++ reg = <0xb00 0x100>;
++
++ resets = <&rstctrl 18>;
++ reset-names = "spi";
++
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ status = "disabled";
+ };
+
+ uartlite@c00 {
+ compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
+ reg = <0xc00 0x100>;
+
++ resets = <&rstctrl 19>;
++ reset-names = "uartl";
++
+ interrupt-parent = <&intc>;
+ interrupts = <12>;
+
+ reg-shift = <2>;
+ };
++
++ systick@d00 {
++ compatible = "ralink,mt7620a-systick", "ralink,cevt-systick";
++ reg = <0xd00 0x10>;
++
++ resets = <&rstctrl 28>;
++ reset-names = "intc";
++
++ interrupt-parent = <&cpuintc>;
++ interrupts = <7>;
++ };
++ };
++
++ rstctrl: rstctrl {
++ compatible = "ralink,mt7620a-reset", "ralink,rt2880-reset";
++ #reset-cells = <1>;
+ };
+ };
+diff --git a/arch/mips/ralink/dts/rt3050.dtsi b/arch/mips/ralink/dts/rt3050.dtsi
+index e3203d4..49622d7 100644
+--- a/arch/mips/ralink/dts/rt3050.dtsi
++++ b/arch/mips/ralink/dts/rt3050.dtsi
+@@ -9,6 +9,10 @@
+ };
+ };
+
++ chosen {
++ bootargs = "console=ttyS0,57600";
++ };
++
+ cpuintc: cpuintc@0 {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+@@ -29,10 +33,32 @@
+ reg = <0x0 0x100>;
+ };
+
++ timer@100 {
++ compatible = "ralink,rt3052-timer", "ralink,rt2880-timer";
++ reg = <0x100 0x20>;
++
++ interrupt-parent = <&intc>;
++ interrupts = <1>;
++ };
++
++ watchdog@120 {
++ compatible = "ralink,rt3052-wdt", "ralink,rt2880-wdt";
++ reg = <0x120 0x10>;
++
++ resets = <&rstctrl 8>;
++ reset-names = "wdt";
++
++ interrupt-parent = <&intc>;
++ interrupts = <1>;
++ };
++
+ intc: intc@200 {
+ compatible = "ralink,rt3052-intc", "ralink,rt2880-intc";
+ reg = <0x200 0x100>;
+
++ resets = <&rstctrl 19>;
++ reset-names = "intc";
++
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+@@ -43,17 +69,144 @@
+ memc@300 {
+ compatible = "ralink,rt3052-memc", "ralink,rt3050-memc";
+ reg = <0x300 0x100>;
++
++ resets = <&rstctrl 20>;
++ reset-names = "mc";
++
++ interrupt-parent = <&intc>;
++ interrupts = <3>;
++ };
++
++ uart@500 {
++ compatible = "ralink,rt5350-uart", "ralink,rt2880-uart", "ns16550a";
++ reg = <0x500 0x100>;
++
++ resets = <&rstctrl 12>;
++ reset-names = "uart";
++
++ interrupt-parent = <&intc>;
++ interrupts = <5>;
++
++ reg-shift = <2>;
++
++ status = "disabled";
++ };
++
++ gpio0: gpio@600 {
++ compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio";
++ reg = <0x600 0x34>;
++
++ gpio-controller;
++ #gpio-cells = <2>;
++
++ ralink,gpio-base = <0>;
++ ralink,num-gpios = <24>;
++ ralink,register-map = [ 00 04 08 0c
++ 20 24 28 2c
++ 30 34 ];
++
++ resets = <&rstctrl 13>;
++ reset-names = "pio";
++
++ interrupt-parent = <&intc>;
++ interrupts = <6>;
++
++ status = "disabled";
++ };
++
++ gpio1: gpio@638 {
++ compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio";
++ reg = <0x638 0x24>;
++
++ gpio-controller;
++ #gpio-cells = <2>;
++
++ ralink,gpio-base = <24>;
++ ralink,num-gpios = <16>;
++ ralink,register-map = [ 00 04 08 0c
++ 10 14 18 1c
++ 20 24 ];
++
++ status = "disabled";
++ };
++
++ gpio2: gpio@660 {
++ compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio";
++ reg = <0x660 0x24>;
++
++ gpio-controller;
++ #gpio-cells = <2>;
++
++ ralink,gpio-base = <40>;
++ ralink,num-gpios = <12>;
++ ralink,register-map = [ 00 04 08 0c
++ 10 14 18 1c
++ 20 24 ];
++
++ status = "disabled";
++ };
++
++ spi@b00 {
++ compatible = "ralink,rt3050-spi", "ralink,rt2880-spi";
++ reg = <0xb00 0x100>;
++
++ resets = <&rstctrl 18>;
++ reset-names = "spi";
++
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ status = "disabled";
+ };
+
+ uartlite@c00 {
+ compatible = "ralink,rt3052-uart", "ralink,rt2880-uart", "ns16550a";
+ reg = <0xc00 0x100>;
+
++ resets = <&rstctrl 19>;
++ reset-names = "uartl";
++
+ interrupt-parent = <&intc>;
+ interrupts = <12>;
+
+ reg-shift = <2>;
+ };
++
++ };
++
++ rstctrl: rstctrl {
++ compatible = "ralink,rt3050-reset", "ralink,rt2880-reset";
++ #reset-cells = <1>;
++ };
++
++ ethernet@10100000 {
++ compatible = "ralink,rt3050-eth";
++ reg = <0x10100000 10000>;
++
++ interrupt-parent = <&cpuintc>;
++ interrupts = <5>;
++
++ status = "disabled";
++ };
++
++ esw@10110000 {
++ compatible = "ralink,rt3050-esw";
++ reg = <0x10110000 8000>;
++
++ interrupt-parent = <&intc>;
++ interrupts = <17>;
++
++ status = "disabled";
++ };
++
++ wmac@10180000 {
++ compatible = "ralink,rt3050-wmac", "ralink,rt2880-wmac";
++ reg = <0x10180000 40000>;
++
++ interrupt-parent = <&cpuintc>;
++ interrupts = <6>;
++
++ status = "disabled";
+ };
+
+ usb@101c0000 {
+@@ -63,6 +216,9 @@
+ interrupt-parent = <&intc>;
+ interrupts = <18>;
+
++ resets = <&rstctrl 22>;
++ reset-names = "otg";
++
+ status = "disabled";
+ };
+ };
+diff --git a/arch/mips/ralink/dts/rt3883.dtsi b/arch/mips/ralink/dts/rt3883.dtsi
+index 3b131dd..4d092b1 100644
+--- a/arch/mips/ralink/dts/rt3883.dtsi
++++ b/arch/mips/ralink/dts/rt3883.dtsi
+@@ -29,10 +29,32 @@
+ reg = <0x0 0x100>;
+ };
+
++ timer@100 {
++ compatible = "ralink,rt3883-timer", "ralink,rt2880-timer";
++ reg = <0x100 0x20>;
++
++ interrupt-parent = <&intc>;
++ interrupts = <1>;
++ };
++
++ watchdog@120 {
++ compatible = "ralink,rt3883-wdt", "ralink,rt2880-wdt";
++ reg = <0x120 0x10>;
++
++ resets = <&rstctrl 8>;
++ reset-names = "wdt";
++
++ interrupt-parent = <&intc>;
++ interrupts = <1>;
++ };
++
+ intc: intc@200 {
+ compatible = "ralink,rt3883-intc", "ralink,rt2880-intc";
+ reg = <0x200 0x100>;
+
++ resets = <&rstctrl 19>;
++ reset-names = "intc";
++
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+@@ -43,16 +65,213 @@
+ memc@300 {
+ compatible = "ralink,rt3883-memc", "ralink,rt3050-memc";
+ reg = <0x300 0x100>;
++
++ resets = <&rstctrl 20>;
++ reset-names = "mc";
++
++ interrupt-parent = <&intc>;
++ interrupts = <3>;
++ };
++
++ uart@500 {
++ compatible = "ralink,rt3883-uart", "ralink,rt2880-uart", "ns16550a";
++ reg = <0x500 0x100>;
++
++ resets = <&rstctrl 12>;
++ reset-names = "uart";
++
++ interrupt-parent = <&intc>;
++ interrupts = <5>;
++
++ reg-shift = <2>;
++
++ status = "disabled";
++ };
++
++ gpio0: gpio@600 {
++ compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio";
++ reg = <0x600 0x34>;
++
++ resets = <&rstctrl 13>;
++ reset-names = "pio";
++
++ interrupt-parent = <&intc>;
++ interrupts = <6>;
++
++ gpio-controller;
++ #gpio-cells = <2>;
++
++ ralink,gpio-base = <0>;
++ ralink,num-gpios = <24>;
++ ralink,register-map = [ 00 04 08 0c
++ 20 24 28 2c
++ 30 34 ];
++
++ status = "disabled";
++ };
++
++ gpio1: gpio@638 {
++ compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio";
++ reg = <0x638 0x24>;
++
++ gpio-controller;
++ #gpio-cells = <2>;
++
++ ralink,gpio-base = <24>;
++ ralink,num-gpios = <16>;
++ ralink,register-map = [ 00 04 08 0c
++ 10 14 18 1c
++ 20 24 ];
++
++ status = "disabled";
++ };
++
++ gpio2: gpio@660 {
++ compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio";
++ reg = <0x660 0x24>;
++
++ gpio-controller;
++ #gpio-cells = <2>;
++
++ ralink,gpio-base = <40>;
++ ralink,num-gpios = <32>;
++ ralink,register-map = [ 00 04 08 0c
++ 10 14 18 1c
++ 20 24 ];
++
++ status = "disabled";
++ };
++
++ gpio3: gpio@688 {
++ compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio";
++ reg = <0x688 0x24>;
++
++ gpio-controller;
++ #gpio-cells = <2>;
++
++ ralink,gpio-base = <72>;
++ ralink,num-gpios = <24>;
++ ralink,register-map = [ 00 04 08 0c
++ 10 14 18 1c
++ 20 24 ];
++
++ status = "disabled";
++ };
++
++ spi0: spi@b00 {
++ compatible = "ralink,rt3883-spi", "ralink,rt2880-spi";
++ reg = <0xb00 0x100>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ resets = <&rstctrl 18>;
++ reset-names = "spi";
++
++ status = "disabled";
+ };
+
+ uartlite@c00 {
+ compatible = "ralink,rt3883-uart", "ralink,rt2880-uart", "ns16550a";
+ reg = <0xc00 0x100>;
+
++ resets = <&rstctrl 19>;
++ reset-names = "uartl";
++
+ interrupt-parent = <&intc>;
+ interrupts = <12>;
+
+ reg-shift = <2>;
+ };
+ };
++
++ rstctrl: rstctrl {
++ compatible = "ralink,rt3883-reset", "ralink,rt2880-reset";
++ #reset-cells = <1>;
++ };
++
++ pci@10140000 {
++ compatible = "ralink,rt3883-pci";
++ reg = <0x10140000 0x20000>;
++ #address-cells = <1>;
++ #size-cells = <1>;
++ ranges; /* direct mapping */
++
++ status = "disabled";
++
++ pciintc: interrupt-controller {
++ interrupt-controller;
++ #address-cells = <0>;
++ #interrupt-cells = <1>;
++
++ interrupt-parent = <&cpuintc>;
++ interrupts = <4>;
++ };
++
++ host-bridge {
++ #address-cells = <3>;
++ #size-cells = <2>;
++ #interrupt-cells = <1>;
++
++ device_type = "pci";
++
++ bus-range = <0 255>;
++ ranges = <
++ 0x02000000 0 0x00000000 0x20000000 0 0x10000000 /* pci memory */
++ 0x01000000 0 0x00000000 0x10160000 0 0x00010000 /* io space */
++ >;
++
++ interrupt-map-mask = <0xf800 0 0 7>;
++ interrupt-map = <
++ /* IDSEL 17 */
++ 0x8800 0 0 1 &pciintc 18
++ 0x8800 0 0 2 &pciintc 18
++ 0x8800 0 0 3 &pciintc 18
++ 0x8800 0 0 4 &pciintc 18
++ /* IDSEL 18 */
++ 0x9000 0 0 1 &pciintc 19
++ 0x9000 0 0 2 &pciintc 19
++ 0x9000 0 0 3 &pciintc 19
++ 0x9000 0 0 4 &pciintc 19
++ >;
++
++ pci-bridge@1 {
++ reg = <0x0800 0 0 0 0>;
++ device_type = "pci";
++ #interrupt-cells = <1>;
++ #address-cells = <3>;
++ #size-cells = <2>;
++
++ status = "disabled";
++
++ ralink,pci-slot = <1>;
++
++ interrupt-map-mask = <0x0 0 0 0>;
++ interrupt-map = <0x0 0 0 0 &pciintc 20>;
++ };
++
++ pci-slot@17 {
++ reg = <0x8800 0 0 0 0>;
++ device_type = "pci";
++ #interrupt-cells = <1>;
++ #address-cells = <3>;
++ #size-cells = <2>;
++
++ ralink,pci-slot = <17>;
++
++ status = "disabled";
++ };
++
++ pci-slot@18 {
++ reg = <0x9000 0 0 0 0>;
++ device_type = "pci";
++ #interrupt-cells = <1>;
++ #address-cells = <3>;
++ #size-cells = <2>;
++
++ ralink,pci-slot = <18>;
++
++ status = "disabled";
++ };
++ };
++ };
+ };
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0021-MIPS-ralink-add-cpu-frequency-scaling.patch b/target/linux/ramips/patches-3.14/0021-MIPS-ralink-add-cpu-frequency-scaling.patch
new file mode 100644
index 0000000000..d60d651fb8
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0021-MIPS-ralink-add-cpu-frequency-scaling.patch
@@ -0,0 +1,100 @@
+From e76ecd496c9b074ab21b17f12494d823a407e89a Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 28 Jul 2013 16:26:41 +0200
+Subject: [PATCH 21/57] MIPS: ralink: add cpu frequency scaling
+
+This feature will break udelay() and cause the delay loop to have longer delays
+when the frequency is scaled causing a performance hit.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/cevt-rt3352.c | 36 ++++++++++++++++++++++++++++++++++++
+ 1 file changed, 36 insertions(+)
+
+diff --git a/arch/mips/ralink/cevt-rt3352.c b/arch/mips/ralink/cevt-rt3352.c
+index 24bf057..4174b40 100644
+--- a/arch/mips/ralink/cevt-rt3352.c
++++ b/arch/mips/ralink/cevt-rt3352.c
+@@ -29,6 +29,10 @@
+ /* enable the counter */
+ #define CFG_CNT_EN 0x1
+
++/* mt7620 frequency scaling defines */
++#define CLK_LUT_CFG 0x40
++#define SLEEP_EN BIT(31)
++
+ struct systick_device {
+ void __iomem *membase;
+ struct clock_event_device dev;
+@@ -36,6 +40,8 @@ struct systick_device {
+ int freq_scale;
+ };
+
++static void (*systick_freq_scaling)(struct systick_device *sdev, int status);
++
+ static void systick_set_clock_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt);
+
+@@ -87,6 +93,21 @@ static struct irqaction systick_irqaction = {
+ .dev_id = &systick.dev,
+ };
+
++static inline void mt7620_freq_scaling(struct systick_device *sdev, int status)
++{
++ if (sdev->freq_scale == status)
++ return;
++
++ sdev->freq_scale = status;
++
++ pr_info("%s: %s autosleep mode\n", systick.dev.name,
++ (status) ? ("enable") : ("disable"));
++ if (status)
++ rt_sysc_w32(rt_sysc_r32(CLK_LUT_CFG) | SLEEP_EN, CLK_LUT_CFG);
++ else
++ rt_sysc_w32(rt_sysc_r32(CLK_LUT_CFG) & ~SLEEP_EN, CLK_LUT_CFG);
++}
++
+ static void systick_set_clock_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+ {
+@@ -101,9 +122,13 @@ static void systick_set_clock_mode(enum clock_event_mode mode,
+ sdev->irq_requested = 1;
+ iowrite32(CFG_EXT_STK_EN | CFG_CNT_EN,
+ systick.membase + SYSTICK_CONFIG);
++ if (systick_freq_scaling)
++ systick_freq_scaling(sdev, 1);
+ break;
+
+ case CLOCK_EVT_MODE_SHUTDOWN:
++ if (systick_freq_scaling)
++ systick_freq_scaling(sdev, 0);
+ if (sdev->irq_requested)
+ free_irq(systick.dev.irq, &systick_irqaction);
+ sdev->irq_requested = 0;
+@@ -116,12 +141,23 @@ static void systick_set_clock_mode(enum clock_event_mode mode,
+ }
+ }
+
++static const struct of_device_id systick_match[] = {
++ { .compatible = "ralink,mt7620-systick", .data = mt7620_freq_scaling},
++ {},
++};
++
+ static void __init ralink_systick_init(struct device_node *np)
+ {
++ const struct of_device_id *match;
++
+ systick.membase = of_iomap(np, 0);
+ if (!systick.membase)
+ return;
+
++ match = of_match_node(systick_match, np);
++ if (match)
++ systick_freq_scaling = match->data;
++
+ systick_irqaction.name = np->name;
+ systick.dev.name = np->name;
+ clockevents_calc_mult_shift(&systick.dev, SYSTICK_FREQ, 60);
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0022-MIPS-ralink-copy-the-commandline-from-the-devicetree.patch b/target/linux/ramips/patches-3.14/0022-MIPS-ralink-copy-the-commandline-from-the-devicetree.patch
new file mode 100644
index 0000000000..8ce47a9e1a
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0022-MIPS-ralink-copy-the-commandline-from-the-devicetree.patch
@@ -0,0 +1,26 @@
+From ec26251ea980b1ee88733f178a4e86e3c70fd244 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 4 Aug 2014 18:46:02 +0200
+Subject: [PATCH 22/57] MIPS: ralink: copy the commandline from the devicetree
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/of.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
+index 885cf50..405b79c 100644
+--- a/arch/mips/ralink/of.c
++++ b/arch/mips/ralink/of.c
+@@ -99,6 +99,8 @@ void __init plat_mem_setup(void)
+ */
+ __dt_setup_arch(&__dtb_start);
+
++ strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
++
+ of_scan_flat_dt(early_init_dt_find_memory, NULL);
+ if (memory_dtb)
+ of_scan_flat_dt(early_init_dt_scan_memory, NULL);
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0023-MIPS-ralink-mt7620-fix-usb-issue-during-frequency-sc.patch b/target/linux/ramips/patches-3.14/0023-MIPS-ralink-mt7620-fix-usb-issue-during-frequency-sc.patch
new file mode 100644
index 0000000000..c6bf547bc1
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0023-MIPS-ralink-mt7620-fix-usb-issue-during-frequency-sc.patch
@@ -0,0 +1,57 @@
+From 1f1c12e85defba9459b41ec95b86f23b4791f1ab Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 4 Aug 2014 20:43:25 +0200
+Subject: [PATCH 23/57] MIPS: ralink: mt7620: fix usb issue during frequency
+ scaling
+
+ If the USB HCD is running and the cpu is scaled too low, then the USB stops
+ working. Increase the idle speed of the core to fix this if the kernel is
+ built with USB support.
+
+ The values are taken from the Ralink SDK Kernel.
+
+ Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/mt7620.c | 19 +++++++++++++++++++
+ 1 file changed, 19 insertions(+)
+
+diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
+index c883973..d68b8ff 100644
+--- a/arch/mips/ralink/mt7620.c
++++ b/arch/mips/ralink/mt7620.c
+@@ -36,6 +36,12 @@
+ #define PMU1_CFG 0x8C
+ #define DIG_SW_SEL BIT(25)
+
++/* clock scaling */
++#define CLKCFG_FDIV_MASK 0x1f00
++#define CLKCFG_FDIV_USB_VAL 0x0300
++#define CLKCFG_FFRAC_MASK 0x001f
++#define CLKCFG_FFRAC_USB_VAL 0x0003
++
+ /* does the board have sdram or ddram */
+ static int dram_type;
+
+@@ -337,6 +343,19 @@ void __init ralink_clk_init(void)
+ ralink_clk_add("10000b00.spi", sys_rate);
+ ralink_clk_add("10000c00.uartlite", periph_rate);
+ ralink_clk_add("10180000.wmac", xtal_rate);
++
++ if (IS_ENABLED(CONFIG_USB)) {
++ /*
++ * When the CPU goes into sleep mode, the BUS clock will be too low for
++ * USB to function properly
++ */
++ u32 val = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG);
++
++ val &= ~(CLKCFG_FDIV_MASK | CLKCFG_FFRAC_MASK);
++ val |= CLKCFG_FDIV_USB_VAL | CLKCFG_FFRAC_USB_VAL;
++
++ rt_sysc_w32(val, SYSC_REG_CPU_SYS_CLKCFG);
++ }
+ }
+
+ void __init ralink_of_remap(void)
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0024-MIPS-ralink-add-mt7628an-devicetree-files.patch b/target/linux/ramips/patches-3.14/0024-MIPS-ralink-add-mt7628an-devicetree-files.patch
new file mode 100644
index 0000000000..b1814f4860
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0024-MIPS-ralink-add-mt7628an-devicetree-files.patch
@@ -0,0 +1,292 @@
+From fbc9fb0c2d30f2141e1b0b824f473276c3aef528 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 6 Aug 2014 17:53:24 +0200
+Subject: [PATCH 24/57] MIPS: ralink: add mt7628an devicetree files
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/Kconfig | 4 +
+ arch/mips/ralink/dts/Makefile | 1 +
+ arch/mips/ralink/dts/mt7628an.dtsi | 184 ++++++++++++++++++++++++++++++++
+ arch/mips/ralink/dts/mt7628an_eval.dts | 54 ++++++++++
+ 4 files changed, 243 insertions(+)
+ create mode 100644 arch/mips/ralink/dts/mt7628an.dtsi
+ create mode 100644 arch/mips/ralink/dts/mt7628an_eval.dts
+
+diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
+index 6a04360..9174dbc 100644
+--- a/arch/mips/ralink/Kconfig
++++ b/arch/mips/ralink/Kconfig
+@@ -75,6 +75,10 @@ choice
+ bool "MT7620A eval kit"
+ depends on SOC_MT7620
+
++ config DTB_MT7628AN_EVAL
++ bool "MT7620A eval kit"
++ depends on SOC_MT7620
++
+ config DTB_MT7621_EVAL
+ bool "MT7621 eval kit"
+ depends on SOC_MT7621
+diff --git a/arch/mips/ralink/dts/Makefile b/arch/mips/ralink/dts/Makefile
+index 9742c73..9f4e1c7 100644
+--- a/arch/mips/ralink/dts/Makefile
++++ b/arch/mips/ralink/dts/Makefile
+@@ -3,3 +3,4 @@ obj-$(CONFIG_DTB_RT305X_EVAL) := rt3052_eval.dtb.o
+ obj-$(CONFIG_DTB_RT3883_EVAL) := rt3883_eval.dtb.o
+ obj-$(CONFIG_DTB_MT7620A_EVAL) := mt7620a_eval.dtb.o
+ obj-$(CONFIG_DTB_MT7621_EVAL) := mt7621_eval.dtb.o
++obj-$(CONFIG_DTB_MT7628AN_EVAL) := mt7628an_eval.dtb.o
+diff --git a/arch/mips/ralink/dts/mt7628an.dtsi b/arch/mips/ralink/dts/mt7628an.dtsi
+new file mode 100644
+index 0000000..fd17d0a
+--- /dev/null
++++ b/arch/mips/ralink/dts/mt7628an.dtsi
+@@ -0,0 +1,184 @@
++/ {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ compatible = "ralink,mtk7628an-soc";
++
++ cpus {
++ cpu@0 {
++ compatible = "mips,mips24KEc";
++ };
++ };
++
++ cpuintc: cpuintc@0 {
++ #address-cells = <0>;
++ #interrupt-cells = <1>;
++ interrupt-controller;
++ compatible = "mti,cpu-interrupt-controller";
++ };
++
++ palmbus@10000000 {
++ compatible = "palmbus";
++ reg = <0x10000000 0x200000>;
++ ranges = <0x0 0x10000000 0x1FFFFF>;
++
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ sysc@0 {
++ compatible = "ralink,mt7620a-sysc";
++ reg = <0x0 0x100>;
++ };
++
++ watchdog@120 {
++ compatible = "ralink,mt7628an-wdt", "mtk,mt7621-wdt";
++ reg = <0x120 0x10>;
++
++ resets = <&rstctrl 8>;
++ reset-names = "wdt";
++
++ interrupt-parent = <&intc>;
++ interrupts = <24>;
++ };
++
++ intc: intc@200 {
++ compatible = "ralink,mt7628an-intc", "ralink,rt2880-intc";
++ reg = <0x200 0x100>;
++
++ resets = <&rstctrl 9>;
++ reset-names = "intc";
++
++ interrupt-controller;
++ #interrupt-cells = <1>;
++
++ interrupt-parent = <&cpuintc>;
++ interrupts = <2>;
++
++ ralink,intc-registers = <0x9c 0xa0
++ 0x6c 0xa4
++ 0x80 0x78>;
++ };
++
++ memc@300 {
++ compatible = "ralink,mt7620a-memc", "ralink,rt3050-memc";
++ reg = <0x300 0x100>;
++
++ resets = <&rstctrl 20>;
++ reset-names = "mc";
++
++ interrupt-parent = <&intc>;
++ interrupts = <3>;
++ };
++
++ gpio@600 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ compatible = "mtk,mt7628-gpio", "mtk,mt7621-gpio";
++ reg = <0x600 0x100>;
++
++ gpio0: bank@0 {
++ reg = <0>;
++ compatible = "mtk,mt7621-gpio-bank";
++ gpio-controller;
++ #gpio-cells = <2>;
++ };
++
++ gpio1: bank@1 {
++ reg = <1>;
++ compatible = "mtk,mt7621-gpio-bank";
++ gpio-controller;
++ #gpio-cells = <2>;
++ };
++
++ gpio2: bank@2 {
++ reg = <2>;
++ compatible = "mtk,mt7621-gpio-bank";
++ gpio-controller;
++ #gpio-cells = <2>;
++ };
++ };
++
++ spi@b00 {
++ compatible = "ralink,mt7621-spi";
++ reg = <0xb00 0x100>;
++
++ resets = <&rstctrl 18>;
++ reset-names = "spi";
++
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ pinctrl-names = "default";
++ pinctrl-0 = <&spi_pins>;
++
++ status = "disabled";
++ };
++
++ uartlite@c00 {
++ compatible = "ns16550a";
++ reg = <0xc00 0x100>;
++
++ reg-shift = <2>;
++ reg-io-width = <4>;
++ no-loopback-test;
++
++ resets = <&rstctrl 12>;
++ reset-names = "uartl";
++
++ interrupt-parent = <&intc>;
++ interrupts = <20>;
++
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart0_pins>;
++ };
++ };
++
++ pinctrl {
++ compatible = "ralink,rt2880-pinmux";
++ pinctrl-names = "default";
++ pinctrl-0 = <&state_default>;
++ state_default: pinctrl0 {
++ };
++ spi_pins: spi {
++ spi {
++ ralink,group = "spi";
++ ralink,function = "spi";
++ };
++ };
++ uart0_pins: uartlite {
++ uart {
++ ralink,group = "uart0";
++ ralink,function = "uart";
++ };
++ };
++ };
++
++ rstctrl: rstctrl {
++ compatible = "ralink,mt7620a-reset", "ralink,rt2880-reset";
++ #reset-cells = <1>;
++ };
++
++ usbphy {
++ compatible = "ralink,mt7628an-usbphy", "ralink,mt7620a-usbphy";
++
++ resets = <&rstctrl 22>;
++ reset-names = "host";
++ };
++
++ ehci@101c0000 {
++ compatible = "ralink,rt3xxx-ehci";
++ reg = <0x101c0000 0x1000>;
++
++ interrupt-parent = <&intc>;
++ interrupts = <18>;
++ };
++
++ ohci@101c1000 {
++ compatible = "ralink,rt3xxx-ohci";
++ reg = <0x101c1000 0x1000>;
++
++ interrupt-parent = <&intc>;
++ interrupts = <18>;
++ };
++
++};
+diff --git a/arch/mips/ralink/dts/mt7628an_eval.dts b/arch/mips/ralink/dts/mt7628an_eval.dts
+new file mode 100644
+index 0000000..132c29e
+--- /dev/null
++++ b/arch/mips/ralink/dts/mt7628an_eval.dts
+@@ -0,0 +1,54 @@
++/dts-v1/;
++
++/include/ "mt7628an.dtsi"
++
++/ {
++ compatible = "ralink,mt7628an-eval-board", "ralink,mt7628an-soc";
++ model = "Ralink MT7628AN evaluation board";
++
++ memory@0 {
++ reg = <0x0 0x2000000>;
++ };
++
++ chosen {
++ bootargs = "console=ttyS0,57600 init=/init";
++ };
++
++ palmbus@10000000 {
++ spi@b00 {
++ status = "okay";
++
++ m25p80@0 {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ compatible = "en25q64";
++ reg = <0 0>;
++ linux,modalias = "m25p80", "en25q64";
++ spi-max-frequency = <10000000>;
++
++ partition@0 {
++ label = "u-boot";
++ reg = <0x0 0x30000>;
++ read-only;
++ };
++
++ partition@30000 {
++ label = "u-boot-env";
++ reg = <0x30000 0x10000>;
++ read-only;
++ };
++
++ factory: partition@40000 {
++ label = "factory";
++ reg = <0x40000 0x10000>;
++ read-only;
++ };
++
++ partition@50000 {
++ label = "firmware";
++ reg = <0x50000 0x7b0000>;
++ };
++ };
++ };
++ };
++};
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0025-MIPS-ralink-allow-loading-irq-registers-from-the-dev.patch b/target/linux/ramips/patches-3.14/0025-MIPS-ralink-allow-loading-irq-registers-from-the-dev.patch
new file mode 100644
index 0000000000..3a114d0699
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0025-MIPS-ralink-allow-loading-irq-registers-from-the-dev.patch
@@ -0,0 +1,80 @@
+From b1cc9a15f6ead8dbd849257e42d69a5799fb7597 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 6 Aug 2014 18:24:36 +0200
+Subject: [PATCH 25/57] MIPS: ralink: allow loading irq registers from the
+ devicetree
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/irq.c | 33 +++++++++++++++++++++++----------
+ 1 file changed, 23 insertions(+), 10 deletions(-)
+
+diff --git a/arch/mips/ralink/irq.c b/arch/mips/ralink/irq.c
+index 781b3d1..82c3146 100644
+--- a/arch/mips/ralink/irq.c
++++ b/arch/mips/ralink/irq.c
+@@ -20,14 +20,6 @@
+
+ #include "common.h"
+
+-/* INTC register offsets */
+-#define INTC_REG_STATUS0 0x00
+-#define INTC_REG_STATUS1 0x04
+-#define INTC_REG_TYPE 0x20
+-#define INTC_REG_RAW_STATUS 0x30
+-#define INTC_REG_ENABLE 0x34
+-#define INTC_REG_DISABLE 0x38
+-
+ #define INTC_INT_GLOBAL BIT(31)
+
+ #define RALINK_CPU_IRQ_INTC (MIPS_CPU_IRQ_BASE + 2)
+@@ -44,16 +36,34 @@
+
+ #define RALINK_INTC_IRQ_PERFC (RALINK_INTC_IRQ_BASE + 9)
+
++enum rt_intc_regs_enum {
++ INTC_REG_STATUS0 = 0,
++ INTC_REG_STATUS1,
++ INTC_REG_TYPE,
++ INTC_REG_RAW_STATUS,
++ INTC_REG_ENABLE,
++ INTC_REG_DISABLE,
++};
++
++static u32 rt_intc_regs[] = {
++ [INTC_REG_STATUS0] = 0x00,
++ [INTC_REG_STATUS1] = 0x04,
++ [INTC_REG_TYPE] = 0x20,
++ [INTC_REG_RAW_STATUS] = 0x30,
++ [INTC_REG_ENABLE] = 0x34,
++ [INTC_REG_DISABLE] = 0x38,
++};
++
+ static void __iomem *rt_intc_membase;
+
+ static inline void rt_intc_w32(u32 val, unsigned reg)
+ {
+- __raw_writel(val, rt_intc_membase + reg);
++ __raw_writel(val, rt_intc_membase + rt_intc_regs[reg]);
+ }
+
+ static inline u32 rt_intc_r32(unsigned reg)
+ {
+- return __raw_readl(rt_intc_membase + reg);
++ return __raw_readl(rt_intc_membase + rt_intc_regs[reg]);
+ }
+
+ static void ralink_intc_irq_unmask(struct irq_data *d)
+@@ -134,6 +144,9 @@ static int __init intc_of_init(struct device_node *node,
+ struct irq_domain *domain;
+ int irq;
+
++ if (!of_property_read_u32_array(node, "ralink,intc-registers", rt_intc_regs, 6))
++ pr_info("intc: using register map from devicetree\n");
++
+ irq = irq_of_parse_and_map(node, 0);
+ if (!irq)
+ panic("Failed to get INTC IRQ");
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0026-MIPS-ralink-add-mt7628an-support.patch b/target/linux/ramips/patches-3.14/0026-MIPS-ralink-add-mt7628an-support.patch
new file mode 100644
index 0000000000..f5b2610e67
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0026-MIPS-ralink-add-mt7628an-support.patch
@@ -0,0 +1,405 @@
+From a375beba066516ecafddebc765454ac6ec599f3d Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 6 Aug 2014 18:26:08 +0200
+Subject: [PATCH 26/57] MIPS: ralink: add mt7628an support
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/include/asm/mach-ralink/mt7620.h | 11 ++
+ arch/mips/ralink/Kconfig | 2 +-
+ arch/mips/ralink/mt7620.c | 266 +++++++++++++++++++++++-----
+ 3 files changed, 232 insertions(+), 47 deletions(-)
+
+diff --git a/arch/mips/include/asm/mach-ralink/mt7620.h b/arch/mips/include/asm/mach-ralink/mt7620.h
+index 27b2fa9..c8590df 100644
+--- a/arch/mips/include/asm/mach-ralink/mt7620.h
++++ b/arch/mips/include/asm/mach-ralink/mt7620.h
+@@ -13,6 +13,13 @@
+ #ifndef _MT7620_REGS_H_
+ #define _MT7620_REGS_H_
+
++enum mt762x_soc_type {
++ MT762X_SOC_UNKNOWN = 0,
++ MT762X_SOC_MT7620A,
++ MT762X_SOC_MT7620N,
++ MT762X_SOC_MT7628AN,
++};
++
+ #define MT7620_SYSC_BASE 0x10000000
+
+ #define SYSC_REG_CHIP_NAME0 0x00
+@@ -27,6 +34,7 @@
+
+ #define MT7620_CHIP_NAME0 0x3637544d
+ #define MT7620_CHIP_NAME1 0x20203032
++#define MT7628_CHIP_NAME1 0x20203832
+
+ #define SYSCFG0_XTAL_FREQ_SEL BIT(6)
+
+@@ -71,6 +79,9 @@
+ #define SYSCFG0_DRAM_TYPE_DDR1 1
+ #define SYSCFG0_DRAM_TYPE_DDR2 2
+
++#define SYSCFG0_DRAM_TYPE_DDR2_MT7628 0
++#define SYSCFG0_DRAM_TYPE_DDR1_MT7628 1
++
+ #define MT7620_DRAM_BASE 0x0
+ #define MT7620_SDRAM_SIZE_MIN 2
+ #define MT7620_SDRAM_SIZE_MAX 64
+diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
+index 9174dbc..f93835f 100644
+--- a/arch/mips/ralink/Kconfig
++++ b/arch/mips/ralink/Kconfig
+@@ -35,7 +35,7 @@ choice
+ select HW_HAS_PCI
+
+ config SOC_MT7620
+- bool "MT7620"
++ bool "MT7620/8"
+ select USB_ARCH_HAS_OHCI
+ select USB_ARCH_HAS_EHCI
+
+diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
+index d68b8ff..e590ccf 100644
+--- a/arch/mips/ralink/mt7620.c
++++ b/arch/mips/ralink/mt7620.c
+@@ -42,6 +42,8 @@
+ #define CLKCFG_FFRAC_MASK 0x001f
+ #define CLKCFG_FFRAC_USB_VAL 0x0003
+
++enum mt762x_soc_type mt762x_soc;
++
+ /* does the board have sdram or ddram */
+ static int dram_type;
+
+@@ -159,6 +161,125 @@ struct ralink_pinmux rt_gpio_pinmux = {
+ .uart_mask = MT7620_GPIO_MODE_UART0_MASK,
+ };
+
++static struct rt2880_pmx_func pwm1_grp_mt7628[] = {
++ FUNC("sdcx", 3, 19, 1),
++ FUNC("utif", 2, 19, 1),
++ FUNC("gpio", 1, 19, 1),
++ FUNC("pwm", 0, 19, 1),
++};
++
++static struct rt2880_pmx_func pwm0_grp_mt7628[] = {
++ FUNC("sdcx", 3, 18, 1),
++ FUNC("utif", 2, 18, 1),
++ FUNC("gpio", 1, 18, 1),
++ FUNC("pwm", 0, 18, 1),
++};
++
++static struct rt2880_pmx_func uart2_grp_mt7628[] = {
++ FUNC("sdcx", 3, 20, 2),
++ FUNC("pwm", 2, 20, 2),
++ FUNC("gpio", 1, 20, 2),
++ FUNC("uart", 0, 20, 2),
++};
++
++static struct rt2880_pmx_func uart1_grp_mt7628[] = {
++ FUNC("sdcx", 3, 45, 2),
++ FUNC("pwm", 2, 45, 2),
++ FUNC("gpio", 1, 45, 2),
++ FUNC("uart", 0, 45, 2),
++};
++
++static struct rt2880_pmx_func i2c_grp_mt7628[] = {
++ FUNC("-", 3, 4, 2),
++ FUNC("debug", 2, 4, 2),
++ FUNC("gpio", 1, 4, 2),
++ FUNC("i2c", 0, 4, 2),
++};
++
++static struct rt2880_pmx_func refclk_grp_mt7628[] = { FUNC("reclk", 0, 36, 1) };
++static struct rt2880_pmx_func perst_grp_mt7628[] = { FUNC("perst", 0, 37, 1) };
++static struct rt2880_pmx_func wdt_grp_mt7628[] = { FUNC("wdt", 0, 15, 38) };
++static struct rt2880_pmx_func spi_grp_mt7628[] = { FUNC("spi", 0, 7, 4) };
++
++static struct rt2880_pmx_func sd_mode_grp_mt7628[] = {
++ FUNC("jtag", 3, 22, 8),
++ FUNC("utif", 2, 22, 8),
++ FUNC("gpio", 1, 22, 8),
++ FUNC("sdcx", 0, 22, 8),
++};
++
++static struct rt2880_pmx_func uart0_grp_mt7628[] = {
++ FUNC("-", 3, 12, 2),
++ FUNC("-", 2, 12, 2),
++ FUNC("gpio", 1, 12, 2),
++ FUNC("uart", 0, 12, 2),
++};
++
++static struct rt2880_pmx_func i2s_grp_mt7628[] = {
++ FUNC("antenna", 3, 0, 4),
++ FUNC("pcm", 2, 0, 4),
++ FUNC("gpio", 1, 0, 4),
++ FUNC("i2s", 0, 0, 4),
++};
++
++static struct rt2880_pmx_func spi_cs1_grp_mt7628[] = {
++ FUNC("-", 3, 6, 1),
++ FUNC("refclk", 2, 6, 1),
++ FUNC("gpio", 1, 6, 1),
++ FUNC("spi", 0, 6, 1),
++};
++
++static struct rt2880_pmx_func spis_grp_mt7628[] = {
++ FUNC("pwm", 3, 14, 4),
++ FUNC("util", 2, 14, 4),
++ FUNC("gpio", 1, 14, 4),
++ FUNC("spis", 0, 14, 4),
++};
++
++static struct rt2880_pmx_func gpio_grp_mt7628[] = {
++ FUNC("pcie", 3, 11, 1),
++ FUNC("refclk", 2, 11, 1),
++ FUNC("gpio", 1, 11, 1),
++ FUNC("gpio", 0, 11, 1),
++};
++
++#define MT7628_GPIO_MODE_MASK 0x3
++
++#define MT7628_GPIO_MODE_PWM1 30
++#define MT7628_GPIO_MODE_PWM0 28
++#define MT7628_GPIO_MODE_UART2 26
++#define MT7628_GPIO_MODE_UART1 24
++#define MT7628_GPIO_MODE_I2C 20
++#define MT7628_GPIO_MODE_REFCLK 18
++#define MT7628_GPIO_MODE_PERST 16
++#define MT7628_GPIO_MODE_WDT 14
++#define MT7628_GPIO_MODE_SPI 12
++#define MT7628_GPIO_MODE_SDMODE 10
++#define MT7628_GPIO_MODE_UART0 8
++#define MT7628_GPIO_MODE_I2S 6
++#define MT7628_GPIO_MODE_CS1 4
++#define MT7628_GPIO_MODE_SPIS 2
++#define MT7628_GPIO_MODE_GPIO 0
++
++static struct rt2880_pmx_group mt7628an_pinmux_data[] = {
++ GRP_G("pmw1", pwm1_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_PWM1),
++ GRP_G("pmw1", pwm0_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_PWM0),
++ GRP_G("uart2", uart2_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_UART2),
++ GRP_G("uart1", uart1_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_UART1),
++ GRP_G("i2c", i2c_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_I2C),
++ GRP("refclk", refclk_grp_mt7628, 1, MT7628_GPIO_MODE_REFCLK),
++ GRP("perst", perst_grp_mt7628, 1, MT7628_GPIO_MODE_PERST),
++ GRP("wdt", wdt_grp_mt7628, 1, MT7628_GPIO_MODE_WDT),
++ GRP("spi", spi_grp_mt7628, 1, MT7628_GPIO_MODE_SPI),
++ GRP_G("sdmode", sd_mode_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_SDMODE),
++ GRP_G("uart0", uart0_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_UART0),
++ GRP_G("i2s", i2s_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_I2S),
++ GRP_G("spi cs1", spi_cs1_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_CS1),
++ GRP_G("spis", spis_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_SPIS),
++ GRP_G("gpio", gpio_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_GPIO),
++ { 0 }
++};
++
+ static __init u32
+ mt7620_calc_rate(u32 ref_rate, u32 mul, u32 div)
+ {
+@@ -309,29 +430,42 @@ void __init ralink_clk_init(void)
+
+ xtal_rate = mt7620_get_xtal_rate();
+
+- cpu_pll_rate = mt7620_get_cpu_pll_rate(xtal_rate);
+- pll_rate = mt7620_get_pll_rate(xtal_rate, cpu_pll_rate);
+-
+- cpu_rate = mt7620_get_cpu_rate(pll_rate);
+- dram_rate = mt7620_get_dram_rate(pll_rate);
+- sys_rate = mt7620_get_sys_rate(cpu_rate);
+- periph_rate = mt7620_get_periph_rate(xtal_rate);
+-
+ #define RFMT(label) label ":%lu.%03luMHz "
+ #define RINT(x) ((x) / 1000000)
+ #define RFRAC(x) (((x) / 1000) % 1000)
+
+- pr_debug(RFMT("XTAL") RFMT("CPU_PLL") RFMT("PLL"),
+- RINT(xtal_rate), RFRAC(xtal_rate),
+- RINT(cpu_pll_rate), RFRAC(cpu_pll_rate),
+- RINT(pll_rate), RFRAC(pll_rate));
++ if (mt762x_soc == MT762X_SOC_MT7628AN) {
++ if (xtal_rate == MHZ(40))
++ cpu_rate = MHZ(580);
++ else
++ cpu_rate = MHZ(575);
++ dram_rate = sys_rate = cpu_rate / 3;
++ periph_rate = MHZ(40);
++
++ ralink_clk_add("10000d00.uartlite", periph_rate);
++ ralink_clk_add("10000e00.uartlite", periph_rate);
++ } else {
++ cpu_pll_rate = mt7620_get_cpu_pll_rate(xtal_rate);
++ pll_rate = mt7620_get_pll_rate(xtal_rate, cpu_pll_rate);
++
++ cpu_rate = mt7620_get_cpu_rate(pll_rate);
++ dram_rate = mt7620_get_dram_rate(pll_rate);
++ sys_rate = mt7620_get_sys_rate(cpu_rate);
++ periph_rate = mt7620_get_periph_rate(xtal_rate);
++
++ pr_debug(RFMT("XTAL") RFMT("CPU_PLL") RFMT("PLL"),
++ RINT(xtal_rate), RFRAC(xtal_rate),
++ RINT(cpu_pll_rate), RFRAC(cpu_pll_rate),
++ RINT(pll_rate), RFRAC(pll_rate));
++
++ ralink_clk_add("10000500.uart", periph_rate);
++ }
+
+ pr_debug(RFMT("CPU") RFMT("DRAM") RFMT("SYS") RFMT("PERIPH"),
+ RINT(cpu_rate), RFRAC(cpu_rate),
+ RINT(dram_rate), RFRAC(dram_rate),
+ RINT(sys_rate), RFRAC(sys_rate),
+ RINT(periph_rate), RFRAC(periph_rate));
+-
+ #undef RFRAC
+ #undef RINT
+ #undef RFMT
+@@ -339,12 +473,11 @@ void __init ralink_clk_init(void)
+ ralink_clk_add("cpu", cpu_rate);
+ ralink_clk_add("10000100.timer", periph_rate);
+ ralink_clk_add("10000120.watchdog", periph_rate);
+- ralink_clk_add("10000500.uart", periph_rate);
+ ralink_clk_add("10000b00.spi", sys_rate);
+ ralink_clk_add("10000c00.uartlite", periph_rate);
+ ralink_clk_add("10180000.wmac", xtal_rate);
+
+- if (IS_ENABLED(CONFIG_USB)) {
++ if (IS_ENABLED(CONFIG_USB) && mt762x_soc != MT762X_SOC_MT7628AN) {
+ /*
+ * When the CPU goes into sleep mode, the BUS clock will be too low for
+ * USB to function properly
+@@ -367,6 +500,52 @@ void __init ralink_of_remap(void)
+ panic("Failed to remap core resources");
+ }
+
++static __init void
++mt7620_dram_init(struct ralink_soc_info *soc_info)
++{
++ switch (dram_type) {
++ case SYSCFG0_DRAM_TYPE_SDRAM:
++ pr_info("Board has SDRAM\n");
++ soc_info->mem_size_min = MT7620_SDRAM_SIZE_MIN;
++ soc_info->mem_size_max = MT7620_SDRAM_SIZE_MAX;
++ break;
++
++ case SYSCFG0_DRAM_TYPE_DDR1:
++ pr_info("Board has DDR1\n");
++ soc_info->mem_size_min = MT7620_DDR1_SIZE_MIN;
++ soc_info->mem_size_max = MT7620_DDR1_SIZE_MAX;
++ break;
++
++ case SYSCFG0_DRAM_TYPE_DDR2:
++ pr_info("Board has DDR2\n");
++ soc_info->mem_size_min = MT7620_DDR2_SIZE_MIN;
++ soc_info->mem_size_max = MT7620_DDR2_SIZE_MAX;
++ break;
++ default:
++ BUG();
++ }
++}
++
++static __init void
++mt7628_dram_init(struct ralink_soc_info *soc_info)
++{
++ switch (dram_type) {
++ case SYSCFG0_DRAM_TYPE_DDR1_MT7628:
++ pr_info("Board has DDR1\n");
++ soc_info->mem_size_min = MT7620_DDR1_SIZE_MIN;
++ soc_info->mem_size_max = MT7620_DDR1_SIZE_MAX;
++ break;
++
++ case SYSCFG0_DRAM_TYPE_DDR2_MT7628:
++ pr_info("Board has DDR2\n");
++ soc_info->mem_size_min = MT7620_DDR2_SIZE_MIN;
++ soc_info->mem_size_max = MT7620_DDR2_SIZE_MAX;
++ break;
++ default:
++ BUG();
++ }
++}
++
+ void prom_soc_init(struct ralink_soc_info *soc_info)
+ {
+ void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7620_SYSC_BASE);
+@@ -384,18 +563,25 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
+ rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
+ bga = (rev >> CHIP_REV_PKG_SHIFT) & CHIP_REV_PKG_MASK;
+
+- if (n0 != MT7620_CHIP_NAME0 || n1 != MT7620_CHIP_NAME1)
+- panic("mt7620: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
+-
+- if (bga) {
+- name = "MT7620A";
+- soc_info->compatible = "ralink,mt7620a-soc";
+- } else {
+- name = "MT7620N";
+- soc_info->compatible = "ralink,mt7620n-soc";
++ if (n0 == MT7620_CHIP_NAME0 && n1 == MT7620_CHIP_NAME1) {
++ if (bga) {
++ mt762x_soc = MT762X_SOC_MT7620A;
++ name = "MT7620A";
++ soc_info->compatible = "ralink,mt7620a-soc";
++ } else {
++ mt762x_soc = MT762X_SOC_MT7620N;
++ name = "MT7620N";
++ soc_info->compatible = "ralink,mt7620n-soc";
+ #ifdef CONFIG_PCI
+- panic("mt7620n is only supported for non pci kernels");
++ panic("mt7620n is only supported for non pci kernels");
+ #endif
++ }
++ } else if (n0 == MT7620_CHIP_NAME0 && n1 == MT7628_CHIP_NAME1) {
++ mt762x_soc = MT762X_SOC_MT7628AN;
++ name = "MT7628AN";
++ soc_info->compatible = "ralink,mt7628an-soc";
++ } else {
++ panic("mt762x: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
+ }
+
+ snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
+@@ -407,28 +593,11 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
+ cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0);
+ dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & SYSCFG0_DRAM_TYPE_MASK;
+
+- switch (dram_type) {
+- case SYSCFG0_DRAM_TYPE_SDRAM:
+- pr_info("Board has SDRAM\n");
+- soc_info->mem_size_min = MT7620_SDRAM_SIZE_MIN;
+- soc_info->mem_size_max = MT7620_SDRAM_SIZE_MAX;
+- break;
+-
+- case SYSCFG0_DRAM_TYPE_DDR1:
+- pr_info("Board has DDR1\n");
+- soc_info->mem_size_min = MT7620_DDR1_SIZE_MIN;
+- soc_info->mem_size_max = MT7620_DDR1_SIZE_MAX;
+- break;
+-
+- case SYSCFG0_DRAM_TYPE_DDR2:
+- pr_info("Board has DDR2\n");
+- soc_info->mem_size_min = MT7620_DDR2_SIZE_MIN;
+- soc_info->mem_size_max = MT7620_DDR2_SIZE_MAX;
+- break;
+- default:
+- BUG();
+- }
+ soc_info->mem_base = MT7620_DRAM_BASE;
++ if (mt762x_soc == MT762X_SOC_MT7628AN)
++ mt7628_dram_init(soc_info);
++ else
++ mt7620_dram_init(soc_info);
+
+ pmu0 = __raw_readl(sysc + PMU0_CFG);
+ pmu1 = __raw_readl(sysc + PMU1_CFG);
+@@ -437,4 +606,9 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
+ (pmu0 & PMU_SW_SET) ? ("sw") : ("hw"));
+ pr_info("Digital PMU set to %s control\n",
+ (pmu1 & DIG_SW_SEL) ? ("sw") : ("hw"));
++
++ if (mt762x_soc == MT762X_SOC_MT7628AN)
++ rt2880_pinmux_data = mt7628an_pinmux_data;
++ else
++ rt2880_pinmux_data = mt7620a_pinmux_data;
+ }
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0027-serial-ralink-adds-mt7620-serial.patch b/target/linux/ramips/patches-3.14/0027-serial-ralink-adds-mt7620-serial.patch
new file mode 100644
index 0000000000..1d95f9c387
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0027-serial-ralink-adds-mt7620-serial.patch
@@ -0,0 +1,28 @@
+From 0b24e0e6bf2d9a1ca5f95446bc025dafc226998c Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 15 Mar 2013 18:16:01 +0100
+Subject: [PATCH 27/57] serial: ralink: adds mt7620 serial
+
+Add the config symbol for Mediatek7620 SoC to SERIAL_8250_RT288X
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/tty/serial/8250/Kconfig | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
+index 2332991..7fb6873 100644
+--- a/drivers/tty/serial/8250/Kconfig
++++ b/drivers/tty/serial/8250/Kconfig
+@@ -297,7 +297,7 @@ config SERIAL_8250_EM
+
+ config SERIAL_8250_RT288X
+ bool "Ralink RT288x/RT305x/RT3662/RT3883 serial port support"
+- depends on SERIAL_8250 && (SOC_RT288X || SOC_RT305X || SOC_RT3883)
++ depends on SERIAL_8250 && (SOC_RT288X || SOC_RT305X || SOC_RT3883 || SOC_MT7620)
+ help
+ If you have a Ralink RT288x/RT305x SoC based board and want to use the
+ serial port, say Y to this option. The driver can handle up to 2 serial
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0028-serial-ralink-the-core-has-a-size-of-0x100-and-not-0.patch b/target/linux/ramips/patches-3.14/0028-serial-ralink-the-core-has-a-size-of-0x100-and-not-0.patch
new file mode 100644
index 0000000000..072380ce01
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0028-serial-ralink-the-core-has-a-size-of-0x100-and-not-0.patch
@@ -0,0 +1,27 @@
+From b9ba09038dab4d824176ea2c2f2b73f49b567217 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 16 Mar 2014 04:52:01 +0000
+Subject: [PATCH 28/57] serial: ralink: the core has a size of 0x100 and not
+ 0x1000
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/tty/serial/8250/8250_core.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
+index 69932b7..606cbc6 100644
+--- a/drivers/tty/serial/8250/8250_core.c
++++ b/drivers/tty/serial/8250/8250_core.c
+@@ -2517,7 +2517,7 @@ serial8250_pm(struct uart_port *port, unsigned int state,
+ static unsigned int serial8250_port_size(struct uart_8250_port *pt)
+ {
+ if (pt->port.iotype == UPIO_AU)
+- return 0x1000;
++ return 0x100;
+ if (is_omap1_8250(pt))
+ return 0x16 << pt->port.regshift;
+
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0029-serial-of-allow-au1x00-and-rt288x-to-load-from-OF.patch b/target/linux/ramips/patches-3.14/0029-serial-of-allow-au1x00-and-rt288x-to-load-from-OF.patch
new file mode 100644
index 0000000000..baae397bf2
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0029-serial-of-allow-au1x00-and-rt288x-to-load-from-OF.patch
@@ -0,0 +1,32 @@
+From 49b47dfcef1353cd28eac8f64170e75d28ce4311 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 14 Jul 2013 23:18:57 +0200
+Subject: [PATCH 29/57] serial: of: allow au1x00 and rt288x to load from OF
+
+In order to make serial_8250 loadable via OF on Au1x00 and Ralink WiSoC we need
+to default the iotype to UPIO_AU.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/tty/serial/of_serial.c | 5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
+index 9924660..42853b4 100644
+--- a/drivers/tty/serial/of_serial.c
++++ b/drivers/tty/serial/of_serial.c
+@@ -102,7 +102,10 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
+ port->fifosize = prop;
+
+ port->irq = irq_of_parse_and_map(np, 0);
+- port->iotype = UPIO_MEM;
++ if (of_device_is_compatible(np, "ralink,rt2880-uart"))
++ port->iotype = UPIO_AU;
++ else
++ port->iotype = UPIO_MEM;
+ if (of_property_read_u32(np, "reg-io-width", &prop) == 0) {
+ switch (prop) {
+ case 1:
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0030-pinctrl-ralink-add-pinctrl-driver.patch b/target/linux/ramips/patches-3.14/0030-pinctrl-ralink-add-pinctrl-driver.patch
new file mode 100644
index 0000000000..9e006b5821
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0030-pinctrl-ralink-add-pinctrl-driver.patch
@@ -0,0 +1,1429 @@
+From 675c6ddd9432c39f508f9d6bdda17d9c675788cf Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 27 Jul 2014 09:34:05 +0100
+Subject: [PATCH 30/57] pinctrl: ralink: add pinctrl driver
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/Kconfig | 2 +
+ arch/mips/include/asm/mach-ralink/mt7620.h | 41 ++-
+ arch/mips/include/asm/mach-ralink/pinmux.h | 53 ++++
+ arch/mips/include/asm/mach-ralink/rt305x.h | 35 ++-
+ arch/mips/include/asm/mach-ralink/rt3883.h | 16 +-
+ arch/mips/ralink/common.h | 19 --
+ arch/mips/ralink/mt7620.c | 159 +++-------
+ arch/mips/ralink/rt288x.c | 62 ++--
+ arch/mips/ralink/rt305x.c | 151 ++++-----
+ arch/mips/ralink/rt3883.c | 173 +++--------
+ drivers/pinctrl/Kconfig | 5 +
+ drivers/pinctrl/Makefile | 1 +
+ drivers/pinctrl/pinctrl-rt2880.c | 467 ++++++++++++++++++++++++++++
+ 13 files changed, 764 insertions(+), 420 deletions(-)
+ create mode 100644 arch/mips/include/asm/mach-ralink/pinmux.h
+ create mode 100644 drivers/pinctrl/pinctrl-rt2880.c
+
+diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
+index 95fa1f1..4ac98ca 100644
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -435,6 +435,8 @@ config RALINK
+ select CLKDEV_LOOKUP
+ select ARCH_HAS_RESET_CONTROLLER
+ select RESET_CONTROLLER
++ select PINCTRL
++ select PINCTRL_RT2880
+
+ config SGI_IP22
+ bool "SGI IP22 (Indy/Indigo2)"
+diff --git a/arch/mips/include/asm/mach-ralink/mt7620.h b/arch/mips/include/asm/mach-ralink/mt7620.h
+index c8590df..1976fb8 100644
+--- a/arch/mips/include/asm/mach-ralink/mt7620.h
++++ b/arch/mips/include/asm/mach-ralink/mt7620.h
+@@ -90,7 +90,6 @@ enum mt762x_soc_type {
+ #define MT7620_DDR2_SIZE_MIN 32
+ #define MT7620_DDR2_SIZE_MAX 256
+
+-#define MT7620_GPIO_MODE_I2C BIT(0)
+ #define MT7620_GPIO_MODE_UART0_SHIFT 2
+ #define MT7620_GPIO_MODE_UART0_MASK 0x7
+ #define MT7620_GPIO_MODE_UART0(x) ((x) << MT7620_GPIO_MODE_UART0_SHIFT)
+@@ -102,16 +101,36 @@ enum mt762x_soc_type {
+ #define MT7620_GPIO_MODE_GPIO_UARTF 0x5
+ #define MT7620_GPIO_MODE_GPIO_I2S 0x6
+ #define MT7620_GPIO_MODE_GPIO 0x7
+-#define MT7620_GPIO_MODE_UART1 BIT(5)
+-#define MT7620_GPIO_MODE_MDIO BIT(8)
+-#define MT7620_GPIO_MODE_RGMII1 BIT(9)
+-#define MT7620_GPIO_MODE_RGMII2 BIT(10)
+-#define MT7620_GPIO_MODE_SPI BIT(11)
+-#define MT7620_GPIO_MODE_SPI_REF_CLK BIT(12)
+-#define MT7620_GPIO_MODE_WLED BIT(13)
+-#define MT7620_GPIO_MODE_JTAG BIT(15)
+-#define MT7620_GPIO_MODE_EPHY BIT(15)
+-#define MT7620_GPIO_MODE_WDT BIT(22)
++
++#define MT7620_GPIO_MODE_NAND 0
++#define MT7620_GPIO_MODE_SD 1
++#define MT7620_GPIO_MODE_ND_SD_GPIO 2
++#define MT7620_GPIO_MODE_ND_SD_MASK 0x3
++#define MT7620_GPIO_MODE_ND_SD_SHIFT 18
++
++#define MT7620_GPIO_MODE_PCIE_RST 0
++#define MT7620_GPIO_MODE_PCIE_REF 1
++#define MT7620_GPIO_MODE_PCIE_GPIO 2
++#define MT7620_GPIO_MODE_PCIE_MASK 0x3
++#define MT7620_GPIO_MODE_PCIE_SHIFT 16
++
++#define MT7620_GPIO_MODE_WDT_RST 0
++#define MT7620_GPIO_MODE_WDT_REF 1
++#define MT7620_GPIO_MODE_WDT_GPIO 2
++#define MT7620_GPIO_MODE_WDT_MASK 0x3
++#define MT7620_GPIO_MODE_WDT_SHIFT 21
++
++#define MT7620_GPIO_MODE_I2C 0
++#define MT7620_GPIO_MODE_UART1 5
++#define MT7620_GPIO_MODE_MDIO 8
++#define MT7620_GPIO_MODE_RGMII1 9
++#define MT7620_GPIO_MODE_RGMII2 10
++#define MT7620_GPIO_MODE_SPI 11
++#define MT7620_GPIO_MODE_SPI_REF_CLK 12
++#define MT7620_GPIO_MODE_WLED 13
++#define MT7620_GPIO_MODE_JTAG 15
++#define MT7620_GPIO_MODE_EPHY 15
++#define MT7620_GPIO_MODE_PA 20
+
+ static inline int mt7620_get_eco(void)
+ {
+diff --git a/arch/mips/include/asm/mach-ralink/pinmux.h b/arch/mips/include/asm/mach-ralink/pinmux.h
+new file mode 100644
+index 0000000..324fa40
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ralink/pinmux.h
+@@ -0,0 +1,53 @@
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * publishhed by the Free Software Foundation.
++ *
++ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
++ */
++
++#ifndef _RT288X_PINMUX_H__
++#define _RT288X_PINMUX_H__
++
++#define FUNC(name, value, pin_first, pin_count) { name, value, pin_first, pin_count }
++#define GRP(_name, _func, _mask, _shift) \
++ { .name = _name, .mask = _mask, .shift = _shift, \
++ .func = _func, .gpio = _mask, \
++ .func_count = ARRAY_SIZE(_func) }
++
++#define GRP_G(_name, _func, _mask, _gpio, _shift) \
++ { .name = _name, .mask = _mask, .shift = _shift, \
++ .func = _func, .gpio = _gpio, \
++ .func_count = ARRAY_SIZE(_func) }
++
++struct rt2880_pmx_group;
++
++struct rt2880_pmx_func {
++ const char *name;
++ const char value;
++
++ int pin_first;
++ int pin_count;
++ int *pins;
++
++ int *groups;
++ int group_count;
++
++ int enabled;
++};
++
++struct rt2880_pmx_group {
++ const char *name;
++ int enabled;
++
++ const u32 shift;
++ const char mask;
++ const char gpio;
++
++ struct rt2880_pmx_func *func;
++ int func_count;
++};
++
++extern struct rt2880_pmx_group *rt2880_pinmux_data;
++
++#endif
+diff --git a/arch/mips/include/asm/mach-ralink/rt305x.h b/arch/mips/include/asm/mach-ralink/rt305x.h
+index 069bf37..96f731b 100644
+--- a/arch/mips/include/asm/mach-ralink/rt305x.h
++++ b/arch/mips/include/asm/mach-ralink/rt305x.h
+@@ -125,24 +125,29 @@ static inline int soc_is_rt5350(void)
+ #define RT305X_GPIO_GE0_TXD0 40
+ #define RT305X_GPIO_GE0_RXCLK 51
+
+-#define RT305X_GPIO_MODE_I2C BIT(0)
+-#define RT305X_GPIO_MODE_SPI BIT(1)
+ #define RT305X_GPIO_MODE_UART0_SHIFT 2
+ #define RT305X_GPIO_MODE_UART0_MASK 0x7
+ #define RT305X_GPIO_MODE_UART0(x) ((x) << RT305X_GPIO_MODE_UART0_SHIFT)
+-#define RT305X_GPIO_MODE_UARTF 0x0
+-#define RT305X_GPIO_MODE_PCM_UARTF 0x1
+-#define RT305X_GPIO_MODE_PCM_I2S 0x2
+-#define RT305X_GPIO_MODE_I2S_UARTF 0x3
+-#define RT305X_GPIO_MODE_PCM_GPIO 0x4
+-#define RT305X_GPIO_MODE_GPIO_UARTF 0x5
+-#define RT305X_GPIO_MODE_GPIO_I2S 0x6
+-#define RT305X_GPIO_MODE_GPIO 0x7
+-#define RT305X_GPIO_MODE_UART1 BIT(5)
+-#define RT305X_GPIO_MODE_JTAG BIT(6)
+-#define RT305X_GPIO_MODE_MDIO BIT(7)
+-#define RT305X_GPIO_MODE_SDRAM BIT(8)
+-#define RT305X_GPIO_MODE_RGMII BIT(9)
++#define RT305X_GPIO_MODE_UARTF 0
++#define RT305X_GPIO_MODE_PCM_UARTF 1
++#define RT305X_GPIO_MODE_PCM_I2S 2
++#define RT305X_GPIO_MODE_I2S_UARTF 3
++#define RT305X_GPIO_MODE_PCM_GPIO 4
++#define RT305X_GPIO_MODE_GPIO_UARTF 5
++#define RT305X_GPIO_MODE_GPIO_I2S 6
++#define RT305X_GPIO_MODE_GPIO 7
++
++#define RT305X_GPIO_MODE_I2C 0
++#define RT305X_GPIO_MODE_SPI 1
++#define RT305X_GPIO_MODE_UART1 5
++#define RT305X_GPIO_MODE_JTAG 6
++#define RT305X_GPIO_MODE_MDIO 7
++#define RT305X_GPIO_MODE_SDRAM 8
++#define RT305X_GPIO_MODE_RGMII 9
++#define RT5350_GPIO_MODE_PHY_LED 14
++#define RT5350_GPIO_MODE_SPI_CS1 21
++#define RT3352_GPIO_MODE_LNA 18
++#define RT3352_GPIO_MODE_PA 20
+
+ #define RT3352_SYSC_REG_SYSCFG0 0x010
+ #define RT3352_SYSC_REG_SYSCFG1 0x014
+diff --git a/arch/mips/include/asm/mach-ralink/rt3883.h b/arch/mips/include/asm/mach-ralink/rt3883.h
+index 058382f..0fbe6f9 100644
+--- a/arch/mips/include/asm/mach-ralink/rt3883.h
++++ b/arch/mips/include/asm/mach-ralink/rt3883.h
+@@ -112,8 +112,6 @@
+ #define RT3883_CLKCFG1_PCI_CLK_EN BIT(19)
+ #define RT3883_CLKCFG1_UPHY0_CLK_EN BIT(18)
+
+-#define RT3883_GPIO_MODE_I2C BIT(0)
+-#define RT3883_GPIO_MODE_SPI BIT(1)
+ #define RT3883_GPIO_MODE_UART0_SHIFT 2
+ #define RT3883_GPIO_MODE_UART0_MASK 0x7
+ #define RT3883_GPIO_MODE_UART0(x) ((x) << RT3883_GPIO_MODE_UART0_SHIFT)
+@@ -125,11 +123,15 @@
+ #define RT3883_GPIO_MODE_GPIO_UARTF 0x5
+ #define RT3883_GPIO_MODE_GPIO_I2S 0x6
+ #define RT3883_GPIO_MODE_GPIO 0x7
+-#define RT3883_GPIO_MODE_UART1 BIT(5)
+-#define RT3883_GPIO_MODE_JTAG BIT(6)
+-#define RT3883_GPIO_MODE_MDIO BIT(7)
+-#define RT3883_GPIO_MODE_GE1 BIT(9)
+-#define RT3883_GPIO_MODE_GE2 BIT(10)
++
++#define RT3883_GPIO_MODE_I2C 0
++#define RT3883_GPIO_MODE_SPI 1
++#define RT3883_GPIO_MODE_UART1 5
++#define RT3883_GPIO_MODE_JTAG 6
++#define RT3883_GPIO_MODE_MDIO 7
++#define RT3883_GPIO_MODE_GE1 9
++#define RT3883_GPIO_MODE_GE2 10
++
+ #define RT3883_GPIO_MODE_PCI_SHIFT 11
+ #define RT3883_GPIO_MODE_PCI_MASK 0x7
+ #define RT3883_GPIO_MODE_PCI (RT3883_GPIO_MODE_PCI_MASK << RT3883_GPIO_MODE_PCI_SHIFT)
+diff --git a/arch/mips/ralink/common.h b/arch/mips/ralink/common.h
+index 42dfd61..8e7d8e6 100644
+--- a/arch/mips/ralink/common.h
++++ b/arch/mips/ralink/common.h
+@@ -11,25 +11,6 @@
+
+ #define RAMIPS_SYS_TYPE_LEN 32
+
+-struct ralink_pinmux_grp {
+- const char *name;
+- u32 mask;
+- int gpio_first;
+- int gpio_last;
+-};
+-
+-struct ralink_pinmux {
+- struct ralink_pinmux_grp *mode;
+- struct ralink_pinmux_grp *uart;
+- int uart_shift;
+- u32 uart_mask;
+- void (*wdt_reset)(void);
+- struct ralink_pinmux_grp *pci;
+- int pci_shift;
+- u32 pci_mask;
+-};
+-extern struct ralink_pinmux rt_gpio_pinmux;
+-
+ struct ralink_soc_info {
+ unsigned char sys_type[RAMIPS_SYS_TYPE_LEN];
+ unsigned char *compatible;
+diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
+index e590ccf..818a7db 100644
+--- a/arch/mips/ralink/mt7620.c
++++ b/arch/mips/ralink/mt7620.c
+@@ -17,6 +17,7 @@
+ #include <asm/mipsregs.h>
+ #include <asm/mach-ralink/ralink_regs.h>
+ #include <asm/mach-ralink/mt7620.h>
++#include <asm/mach-ralink/pinmux.h>
+
+ #include "common.h"
+
+@@ -47,118 +48,58 @@ enum mt762x_soc_type mt762x_soc;
+ /* does the board have sdram or ddram */
+ static int dram_type;
+
+-static struct ralink_pinmux_grp mode_mux[] = {
+- {
+- .name = "i2c",
+- .mask = MT7620_GPIO_MODE_I2C,
+- .gpio_first = 1,
+- .gpio_last = 2,
+- }, {
+- .name = "spi",
+- .mask = MT7620_GPIO_MODE_SPI,
+- .gpio_first = 3,
+- .gpio_last = 6,
+- }, {
+- .name = "uartlite",
+- .mask = MT7620_GPIO_MODE_UART1,
+- .gpio_first = 15,
+- .gpio_last = 16,
+- }, {
+- .name = "wdt",
+- .mask = MT7620_GPIO_MODE_WDT,
+- .gpio_first = 17,
+- .gpio_last = 17,
+- }, {
+- .name = "mdio",
+- .mask = MT7620_GPIO_MODE_MDIO,
+- .gpio_first = 22,
+- .gpio_last = 23,
+- }, {
+- .name = "rgmii1",
+- .mask = MT7620_GPIO_MODE_RGMII1,
+- .gpio_first = 24,
+- .gpio_last = 35,
+- }, {
+- .name = "spi refclk",
+- .mask = MT7620_GPIO_MODE_SPI_REF_CLK,
+- .gpio_first = 37,
+- .gpio_last = 39,
+- }, {
+- .name = "jtag",
+- .mask = MT7620_GPIO_MODE_JTAG,
+- .gpio_first = 40,
+- .gpio_last = 44,
+- }, {
+- /* shared lines with jtag */
+- .name = "ephy",
+- .mask = MT7620_GPIO_MODE_EPHY,
+- .gpio_first = 40,
+- .gpio_last = 44,
+- }, {
+- .name = "nand",
+- .mask = MT7620_GPIO_MODE_JTAG,
+- .gpio_first = 45,
+- .gpio_last = 59,
+- }, {
+- .name = "rgmii2",
+- .mask = MT7620_GPIO_MODE_RGMII2,
+- .gpio_first = 60,
+- .gpio_last = 71,
+- }, {
+- .name = "wled",
+- .mask = MT7620_GPIO_MODE_WLED,
+- .gpio_first = 72,
+- .gpio_last = 72,
+- }, {0}
++static struct rt2880_pmx_func i2c_grp[] = { FUNC("i2c", 0, 1, 2) };
++static struct rt2880_pmx_func spi_grp[] = { FUNC("spi", 0, 3, 4) };
++static struct rt2880_pmx_func uartlite_grp[] = { FUNC("uartlite", 0, 15, 2) };
++static struct rt2880_pmx_func mdio_grp[] = { FUNC("mdio", 0, 22, 2) };
++static struct rt2880_pmx_func rgmii1_grp[] = { FUNC("rgmii1", 0, 24, 12) };
++static struct rt2880_pmx_func refclk_grp[] = { FUNC("spi refclk", 0, 37, 3) };
++static struct rt2880_pmx_func ephy_grp[] = { FUNC("ephy", 0, 40, 5) };
++static struct rt2880_pmx_func rgmii2_grp[] = { FUNC("rgmii2", 0, 60, 12) };
++static struct rt2880_pmx_func wled_grp[] = { FUNC("wled", 0, 72, 1) };
++static struct rt2880_pmx_func pa_grp[] = { FUNC("pa", 0, 18, 4) };
++static struct rt2880_pmx_func uartf_grp[] = {
++ FUNC("uartf", MT7620_GPIO_MODE_UARTF, 7, 8),
++ FUNC("pcm uartf", MT7620_GPIO_MODE_PCM_UARTF, 7, 8),
++ FUNC("pcm i2s", MT7620_GPIO_MODE_PCM_I2S, 7, 8),
++ FUNC("i2s uartf", MT7620_GPIO_MODE_I2S_UARTF, 7, 8),
++ FUNC("pcm gpio", MT7620_GPIO_MODE_PCM_GPIO, 11, 4),
++ FUNC("gpio uartf", MT7620_GPIO_MODE_GPIO_UARTF, 7, 4),
++ FUNC("gpio i2s", MT7620_GPIO_MODE_GPIO_I2S, 7, 4),
+ };
+-
+-static struct ralink_pinmux_grp uart_mux[] = {
+- {
+- .name = "uartf",
+- .mask = MT7620_GPIO_MODE_UARTF,
+- .gpio_first = 7,
+- .gpio_last = 14,
+- }, {
+- .name = "pcm uartf",
+- .mask = MT7620_GPIO_MODE_PCM_UARTF,
+- .gpio_first = 7,
+- .gpio_last = 14,
+- }, {
+- .name = "pcm i2s",
+- .mask = MT7620_GPIO_MODE_PCM_I2S,
+- .gpio_first = 7,
+- .gpio_last = 14,
+- }, {
+- .name = "i2s uartf",
+- .mask = MT7620_GPIO_MODE_I2S_UARTF,
+- .gpio_first = 7,
+- .gpio_last = 14,
+- }, {
+- .name = "pcm gpio",
+- .mask = MT7620_GPIO_MODE_PCM_GPIO,
+- .gpio_first = 11,
+- .gpio_last = 14,
+- }, {
+- .name = "gpio uartf",
+- .mask = MT7620_GPIO_MODE_GPIO_UARTF,
+- .gpio_first = 7,
+- .gpio_last = 10,
+- }, {
+- .name = "gpio i2s",
+- .mask = MT7620_GPIO_MODE_GPIO_I2S,
+- .gpio_first = 7,
+- .gpio_last = 10,
+- }, {
+- .name = "gpio",
+- .mask = MT7620_GPIO_MODE_GPIO,
+- }, {0}
++static struct rt2880_pmx_func wdt_grp[] = {
++ FUNC("wdt rst", 0, 17, 1),
++ FUNC("wdt refclk", 0, 17, 1),
++ };
++static struct rt2880_pmx_func pcie_rst_grp[] = {
++ FUNC("pcie rst", MT7620_GPIO_MODE_PCIE_RST, 36, 1),
++ FUNC("pcie refclk", MT7620_GPIO_MODE_PCIE_REF, 36, 1)
++};
++static struct rt2880_pmx_func nd_sd_grp[] = {
++ FUNC("nand", MT7620_GPIO_MODE_NAND, 45, 15),
++ FUNC("sd", MT7620_GPIO_MODE_SD, 45, 15)
+ };
+
+-struct ralink_pinmux rt_gpio_pinmux = {
+- .mode = mode_mux,
+- .uart = uart_mux,
+- .uart_shift = MT7620_GPIO_MODE_UART0_SHIFT,
+- .uart_mask = MT7620_GPIO_MODE_UART0_MASK,
++static struct rt2880_pmx_group mt7620a_pinmux_data[] = {
++ GRP("i2c", i2c_grp, 1, MT7620_GPIO_MODE_I2C),
++ GRP("uartf", uartf_grp, MT7620_GPIO_MODE_UART0_MASK,
++ MT7620_GPIO_MODE_UART0_SHIFT),
++ GRP("spi", spi_grp, 1, MT7620_GPIO_MODE_SPI),
++ GRP("uartlite", uartlite_grp, 1, MT7620_GPIO_MODE_UART1),
++ GRP_G("wdt", wdt_grp, MT7620_GPIO_MODE_WDT_MASK,
++ MT7620_GPIO_MODE_WDT_GPIO, MT7620_GPIO_MODE_WDT_SHIFT),
++ GRP("mdio", mdio_grp, 1, MT7620_GPIO_MODE_MDIO),
++ GRP("rgmii1", rgmii1_grp, 1, MT7620_GPIO_MODE_RGMII1),
++ GRP("spi refclk", refclk_grp, 1, MT7620_GPIO_MODE_SPI_REF_CLK),
++ GRP_G("pcie", pcie_rst_grp, MT7620_GPIO_MODE_PCIE_MASK,
++ MT7620_GPIO_MODE_PCIE_GPIO, MT7620_GPIO_MODE_PCIE_SHIFT),
++ GRP_G("nd_sd", nd_sd_grp, MT7620_GPIO_MODE_ND_SD_MASK,
++ MT7620_GPIO_MODE_ND_SD_GPIO, MT7620_GPIO_MODE_ND_SD_SHIFT),
++ GRP("rgmii2", rgmii2_grp, 1, MT7620_GPIO_MODE_RGMII2),
++ GRP("wled", wled_grp, 1, MT7620_GPIO_MODE_WLED),
++ GRP("ephy", ephy_grp, 1, MT7620_GPIO_MODE_EPHY),
++ GRP("pa", pa_grp, 1, MT7620_GPIO_MODE_PA),
++ { 0 }
+ };
+
+ static struct rt2880_pmx_func pwm1_grp_mt7628[] = {
+diff --git a/arch/mips/ralink/rt288x.c b/arch/mips/ralink/rt288x.c
+index 90e8934..2bfc660 100644
+--- a/arch/mips/ralink/rt288x.c
++++ b/arch/mips/ralink/rt288x.c
+@@ -17,46 +17,27 @@
+ #include <asm/mipsregs.h>
+ #include <asm/mach-ralink/ralink_regs.h>
+ #include <asm/mach-ralink/rt288x.h>
++#include <asm/mach-ralink/pinmux.h>
+
+ #include "common.h"
+
+-static struct ralink_pinmux_grp mode_mux[] = {
+- {
+- .name = "i2c",
+- .mask = RT2880_GPIO_MODE_I2C,
+- .gpio_first = 1,
+- .gpio_last = 2,
+- }, {
+- .name = "spi",
+- .mask = RT2880_GPIO_MODE_SPI,
+- .gpio_first = 3,
+- .gpio_last = 6,
+- }, {
+- .name = "uartlite",
+- .mask = RT2880_GPIO_MODE_UART0,
+- .gpio_first = 7,
+- .gpio_last = 14,
+- }, {
+- .name = "jtag",
+- .mask = RT2880_GPIO_MODE_JTAG,
+- .gpio_first = 17,
+- .gpio_last = 21,
+- }, {
+- .name = "mdio",
+- .mask = RT2880_GPIO_MODE_MDIO,
+- .gpio_first = 22,
+- .gpio_last = 23,
+- }, {
+- .name = "sdram",
+- .mask = RT2880_GPIO_MODE_SDRAM,
+- .gpio_first = 24,
+- .gpio_last = 39,
+- }, {
+- .name = "pci",
+- .mask = RT2880_GPIO_MODE_PCI,
+- .gpio_first = 40,
+- .gpio_last = 71,
+- }, {0}
++static struct rt2880_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) };
++static struct rt2880_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) };
++static struct rt2880_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 7, 8) };
++static struct rt2880_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) };
++static struct rt2880_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) };
++static struct rt2880_pmx_func sdram_func[] = { FUNC("sdram", 0, 24, 16) };
++static struct rt2880_pmx_func pci_func[] = { FUNC("pci", 0, 40, 32) };
++
++static struct rt2880_pmx_group rt2880_pinmux_data_act[] = {
++ GRP("i2c", i2c_func, 1, RT2880_GPIO_MODE_I2C),
++ GRP("spi", spi_func, 1, RT2880_GPIO_MODE_SPI),
++ GRP("uartlite", uartlite_func, 1, RT2880_GPIO_MODE_UART0),
++ GRP("jtag", jtag_func, 1, RT2880_GPIO_MODE_JTAG),
++ GRP("mdio", mdio_func, 1, RT2880_GPIO_MODE_MDIO),
++ GRP("sdram", sdram_func, 1, RT2880_GPIO_MODE_SDRAM),
++ GRP("pci", pci_func, 1, RT2880_GPIO_MODE_PCI),
++ { 0 }
+ };
+
+ static void rt288x_wdt_reset(void)
+@@ -69,11 +50,6 @@ static void rt288x_wdt_reset(void)
+ rt_sysc_w32(t, SYSC_REG_CLKCFG);
+ }
+
+-struct ralink_pinmux rt_gpio_pinmux = {
+- .mode = mode_mux,
+- .wdt_reset = rt288x_wdt_reset,
+-};
+-
+ void __init ralink_clk_init(void)
+ {
+ unsigned long cpu_rate, wmac_rate = 40000000;
+@@ -141,4 +117,6 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
+ soc_info->mem_base = RT2880_SDRAM_BASE;
+ soc_info->mem_size_min = RT2880_MEM_SIZE_MIN;
+ soc_info->mem_size_max = RT2880_MEM_SIZE_MAX;
++
++ rt2880_pinmux_data = rt2880_pinmux_data_act;
+ }
+diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
+index bb82a82..356d6a0 100644
+--- a/arch/mips/ralink/rt305x.c
++++ b/arch/mips/ralink/rt305x.c
+@@ -17,90 +17,76 @@
+ #include <asm/mipsregs.h>
+ #include <asm/mach-ralink/ralink_regs.h>
+ #include <asm/mach-ralink/rt305x.h>
++#include <asm/mach-ralink/pinmux.h>
+
+ #include "common.h"
+
+ enum rt305x_soc_type rt305x_soc;
+
+-static struct ralink_pinmux_grp mode_mux[] = {
+- {
+- .name = "i2c",
+- .mask = RT305X_GPIO_MODE_I2C,
+- .gpio_first = RT305X_GPIO_I2C_SD,
+- .gpio_last = RT305X_GPIO_I2C_SCLK,
+- }, {
+- .name = "spi",
+- .mask = RT305X_GPIO_MODE_SPI,
+- .gpio_first = RT305X_GPIO_SPI_EN,
+- .gpio_last = RT305X_GPIO_SPI_CLK,
+- }, {
+- .name = "uartlite",
+- .mask = RT305X_GPIO_MODE_UART1,
+- .gpio_first = RT305X_GPIO_UART1_TXD,
+- .gpio_last = RT305X_GPIO_UART1_RXD,
+- }, {
+- .name = "jtag",
+- .mask = RT305X_GPIO_MODE_JTAG,
+- .gpio_first = RT305X_GPIO_JTAG_TDO,
+- .gpio_last = RT305X_GPIO_JTAG_TDI,
+- }, {
+- .name = "mdio",
+- .mask = RT305X_GPIO_MODE_MDIO,
+- .gpio_first = RT305X_GPIO_MDIO_MDC,
+- .gpio_last = RT305X_GPIO_MDIO_MDIO,
+- }, {
+- .name = "sdram",
+- .mask = RT305X_GPIO_MODE_SDRAM,
+- .gpio_first = RT305X_GPIO_SDRAM_MD16,
+- .gpio_last = RT305X_GPIO_SDRAM_MD31,
+- }, {
+- .name = "rgmii",
+- .mask = RT305X_GPIO_MODE_RGMII,
+- .gpio_first = RT305X_GPIO_GE0_TXD0,
+- .gpio_last = RT305X_GPIO_GE0_RXCLK,
+- }, {0}
++static struct rt2880_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) };
++static struct rt2880_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) };
++static struct rt2880_pmx_func uartf_func[] = {
++ FUNC("uartf", RT305X_GPIO_MODE_UARTF, 7, 8),
++ FUNC("pcm uartf", RT305X_GPIO_MODE_PCM_UARTF, 7, 8),
++ FUNC("pcm i2s", RT305X_GPIO_MODE_PCM_I2S, 7, 8),
++ FUNC("i2s uartf", RT305X_GPIO_MODE_I2S_UARTF, 7, 8),
++ FUNC("pcm gpio", RT305X_GPIO_MODE_PCM_GPIO, 11, 4),
++ FUNC("gpio uartf", RT305X_GPIO_MODE_GPIO_UARTF, 7, 4),
++ FUNC("gpio i2s", RT305X_GPIO_MODE_GPIO_I2S, 7, 4),
++};
++static struct rt2880_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 15, 2) };
++static struct rt2880_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) };
++static struct rt2880_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) };
++static struct rt2880_pmx_func rt5350_led_func[] = { FUNC("led", 0, 22, 5) };
++static struct rt2880_pmx_func rt5350_cs1_func[] = {
++ FUNC("spi_cs1", 0, 27, 1),
++ FUNC("wdg_cs1", 1, 27, 1),
++};
++static struct rt2880_pmx_func sdram_func[] = { FUNC("sdram", 0, 24, 16) };
++static struct rt2880_pmx_func rt3352_rgmii_func[] = { FUNC("rgmii", 0, 24, 12) };
++static struct rt2880_pmx_func rgmii_func[] = { FUNC("rgmii", 0, 40, 12) };
++static struct rt2880_pmx_func rt3352_lna_func[] = { FUNC("lna", 0, 36, 2) };
++static struct rt2880_pmx_func rt3352_pa_func[] = { FUNC("pa", 0, 38, 2) };
++static struct rt2880_pmx_func rt3352_led_func[] = { FUNC("led", 0, 40, 5) };
++
++static struct rt2880_pmx_group rt3050_pinmux_data[] = {
++ GRP("i2c", i2c_func, 1, RT305X_GPIO_MODE_I2C),
++ GRP("spi", spi_func, 1, RT305X_GPIO_MODE_SPI),
++ GRP("uartf", uartf_func, RT305X_GPIO_MODE_UART0_MASK,
++ RT305X_GPIO_MODE_UART0_SHIFT),
++ GRP("uartlite", uartlite_func, 1, RT305X_GPIO_MODE_UART1),
++ GRP("jtag", jtag_func, 1, RT305X_GPIO_MODE_JTAG),
++ GRP("mdio", mdio_func, 1, RT305X_GPIO_MODE_MDIO),
++ GRP("rgmii", rgmii_func, 1, RT305X_GPIO_MODE_RGMII),
++ GRP("sdram", sdram_func, 1, RT305X_GPIO_MODE_SDRAM),
++ { 0 }
+ };
+
+-static struct ralink_pinmux_grp uart_mux[] = {
+- {
+- .name = "uartf",
+- .mask = RT305X_GPIO_MODE_UARTF,
+- .gpio_first = RT305X_GPIO_7,
+- .gpio_last = RT305X_GPIO_14,
+- }, {
+- .name = "pcm uartf",
+- .mask = RT305X_GPIO_MODE_PCM_UARTF,
+- .gpio_first = RT305X_GPIO_7,
+- .gpio_last = RT305X_GPIO_14,
+- }, {
+- .name = "pcm i2s",
+- .mask = RT305X_GPIO_MODE_PCM_I2S,
+- .gpio_first = RT305X_GPIO_7,
+- .gpio_last = RT305X_GPIO_14,
+- }, {
+- .name = "i2s uartf",
+- .mask = RT305X_GPIO_MODE_I2S_UARTF,
+- .gpio_first = RT305X_GPIO_7,
+- .gpio_last = RT305X_GPIO_14,
+- }, {
+- .name = "pcm gpio",
+- .mask = RT305X_GPIO_MODE_PCM_GPIO,
+- .gpio_first = RT305X_GPIO_10,
+- .gpio_last = RT305X_GPIO_14,
+- }, {
+- .name = "gpio uartf",
+- .mask = RT305X_GPIO_MODE_GPIO_UARTF,
+- .gpio_first = RT305X_GPIO_7,
+- .gpio_last = RT305X_GPIO_10,
+- }, {
+- .name = "gpio i2s",
+- .mask = RT305X_GPIO_MODE_GPIO_I2S,
+- .gpio_first = RT305X_GPIO_7,
+- .gpio_last = RT305X_GPIO_10,
+- }, {
+- .name = "gpio",
+- .mask = RT305X_GPIO_MODE_GPIO,
+- }, {0}
++static struct rt2880_pmx_group rt3352_pinmux_data[] = {
++ GRP("i2c", i2c_func, 1, RT305X_GPIO_MODE_I2C),
++ GRP("spi", spi_func, 1, RT305X_GPIO_MODE_SPI),
++ GRP("uartf", uartf_func, RT305X_GPIO_MODE_UART0_MASK,
++ RT305X_GPIO_MODE_UART0_SHIFT),
++ GRP("uartlite", uartlite_func, 1, RT305X_GPIO_MODE_UART1),
++ GRP("jtag", jtag_func, 1, RT305X_GPIO_MODE_JTAG),
++ GRP("mdio", mdio_func, 1, RT305X_GPIO_MODE_MDIO),
++ GRP("rgmii", rt3352_rgmii_func, 1, RT305X_GPIO_MODE_RGMII),
++ GRP("lna", rt3352_lna_func, 1, RT3352_GPIO_MODE_LNA),
++ GRP("pa", rt3352_pa_func, 1, RT3352_GPIO_MODE_PA),
++ GRP("led", rt3352_led_func, 1, RT5350_GPIO_MODE_PHY_LED),
++ { 0 }
++};
++
++static struct rt2880_pmx_group rt5350_pinmux_data[] = {
++ GRP("i2c", i2c_func, 1, RT305X_GPIO_MODE_I2C),
++ GRP("spi", spi_func, 1, RT305X_GPIO_MODE_SPI),
++ GRP("uartf", uartf_func, RT305X_GPIO_MODE_UART0_MASK,
++ RT305X_GPIO_MODE_UART0_SHIFT),
++ GRP("uartlite", uartlite_func, 1, RT305X_GPIO_MODE_UART1),
++ GRP("jtag", jtag_func, 1, RT305X_GPIO_MODE_JTAG),
++ GRP("led", rt5350_led_func, 1, RT5350_GPIO_MODE_PHY_LED),
++ GRP("spi_cs1", rt5350_cs1_func, 2, RT5350_GPIO_MODE_SPI_CS1),
++ { 0 }
+ };
+
+ static void rt305x_wdt_reset(void)
+@@ -114,14 +100,6 @@ static void rt305x_wdt_reset(void)
+ rt_sysc_w32(t, SYSC_REG_SYSTEM_CONFIG);
+ }
+
+-struct ralink_pinmux rt_gpio_pinmux = {
+- .mode = mode_mux,
+- .uart = uart_mux,
+- .uart_shift = RT305X_GPIO_MODE_UART0_SHIFT,
+- .uart_mask = RT305X_GPIO_MODE_UART0_MASK,
+- .wdt_reset = rt305x_wdt_reset,
+-};
+-
+ static unsigned long rt5350_get_mem_size(void)
+ {
+ void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE);
+@@ -290,11 +268,14 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
+ soc_info->mem_base = RT305X_SDRAM_BASE;
+ if (soc_is_rt5350()) {
+ soc_info->mem_size = rt5350_get_mem_size();
++ rt2880_pinmux_data = rt5350_pinmux_data;
+ } else if (soc_is_rt305x() || soc_is_rt3350()) {
+ soc_info->mem_size_min = RT305X_MEM_SIZE_MIN;
+ soc_info->mem_size_max = RT305X_MEM_SIZE_MAX;
++ rt2880_pinmux_data = rt3050_pinmux_data;
+ } else if (soc_is_rt3352()) {
+ soc_info->mem_size_min = RT3352_MEM_SIZE_MIN;
+ soc_info->mem_size_max = RT3352_MEM_SIZE_MAX;
++ rt2880_pinmux_data = rt3352_pinmux_data;
+ }
+ }
+diff --git a/arch/mips/ralink/rt3883.c b/arch/mips/ralink/rt3883.c
+index 58b5b9f..86a535c 100644
+--- a/arch/mips/ralink/rt3883.c
++++ b/arch/mips/ralink/rt3883.c
+@@ -17,132 +17,50 @@
+ #include <asm/mipsregs.h>
+ #include <asm/mach-ralink/ralink_regs.h>
+ #include <asm/mach-ralink/rt3883.h>
++#include <asm/mach-ralink/pinmux.h>
+
+ #include "common.h"
+
+-static struct ralink_pinmux_grp mode_mux[] = {
+- {
+- .name = "i2c",
+- .mask = RT3883_GPIO_MODE_I2C,
+- .gpio_first = RT3883_GPIO_I2C_SD,
+- .gpio_last = RT3883_GPIO_I2C_SCLK,
+- }, {
+- .name = "spi",
+- .mask = RT3883_GPIO_MODE_SPI,
+- .gpio_first = RT3883_GPIO_SPI_CS0,
+- .gpio_last = RT3883_GPIO_SPI_MISO,
+- }, {
+- .name = "uartlite",
+- .mask = RT3883_GPIO_MODE_UART1,
+- .gpio_first = RT3883_GPIO_UART1_TXD,
+- .gpio_last = RT3883_GPIO_UART1_RXD,
+- }, {
+- .name = "jtag",
+- .mask = RT3883_GPIO_MODE_JTAG,
+- .gpio_first = RT3883_GPIO_JTAG_TDO,
+- .gpio_last = RT3883_GPIO_JTAG_TCLK,
+- }, {
+- .name = "mdio",
+- .mask = RT3883_GPIO_MODE_MDIO,
+- .gpio_first = RT3883_GPIO_MDIO_MDC,
+- .gpio_last = RT3883_GPIO_MDIO_MDIO,
+- }, {
+- .name = "ge1",
+- .mask = RT3883_GPIO_MODE_GE1,
+- .gpio_first = RT3883_GPIO_GE1_TXD0,
+- .gpio_last = RT3883_GPIO_GE1_RXCLK,
+- }, {
+- .name = "ge2",
+- .mask = RT3883_GPIO_MODE_GE2,
+- .gpio_first = RT3883_GPIO_GE2_TXD0,
+- .gpio_last = RT3883_GPIO_GE2_RXCLK,
+- }, {
+- .name = "pci",
+- .mask = RT3883_GPIO_MODE_PCI,
+- .gpio_first = RT3883_GPIO_PCI_AD0,
+- .gpio_last = RT3883_GPIO_PCI_AD31,
+- }, {
+- .name = "lna a",
+- .mask = RT3883_GPIO_MODE_LNA_A,
+- .gpio_first = RT3883_GPIO_LNA_PE_A0,
+- .gpio_last = RT3883_GPIO_LNA_PE_A2,
+- }, {
+- .name = "lna g",
+- .mask = RT3883_GPIO_MODE_LNA_G,
+- .gpio_first = RT3883_GPIO_LNA_PE_G0,
+- .gpio_last = RT3883_GPIO_LNA_PE_G2,
+- }, {0}
++static struct rt2880_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) };
++static struct rt2880_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) };
++static struct rt2880_pmx_func uartf_func[] = {
++ FUNC("uartf", RT3883_GPIO_MODE_UARTF, 7, 8),
++ FUNC("pcm uartf", RT3883_GPIO_MODE_PCM_UARTF, 7, 8),
++ FUNC("pcm i2s", RT3883_GPIO_MODE_PCM_I2S, 7, 8),
++ FUNC("i2s uartf", RT3883_GPIO_MODE_I2S_UARTF, 7, 8),
++ FUNC("pcm gpio", RT3883_GPIO_MODE_PCM_GPIO, 11, 4),
++ FUNC("gpio uartf", RT3883_GPIO_MODE_GPIO_UARTF, 7, 4),
++ FUNC("gpio i2s", RT3883_GPIO_MODE_GPIO_I2S, 7, 4),
+ };
+-
+-static struct ralink_pinmux_grp uart_mux[] = {
+- {
+- .name = "uartf",
+- .mask = RT3883_GPIO_MODE_UARTF,
+- .gpio_first = RT3883_GPIO_7,
+- .gpio_last = RT3883_GPIO_14,
+- }, {
+- .name = "pcm uartf",
+- .mask = RT3883_GPIO_MODE_PCM_UARTF,
+- .gpio_first = RT3883_GPIO_7,
+- .gpio_last = RT3883_GPIO_14,
+- }, {
+- .name = "pcm i2s",
+- .mask = RT3883_GPIO_MODE_PCM_I2S,
+- .gpio_first = RT3883_GPIO_7,
+- .gpio_last = RT3883_GPIO_14,
+- }, {
+- .name = "i2s uartf",
+- .mask = RT3883_GPIO_MODE_I2S_UARTF,
+- .gpio_first = RT3883_GPIO_7,
+- .gpio_last = RT3883_GPIO_14,
+- }, {
+- .name = "pcm gpio",
+- .mask = RT3883_GPIO_MODE_PCM_GPIO,
+- .gpio_first = RT3883_GPIO_11,
+- .gpio_last = RT3883_GPIO_14,
+- }, {
+- .name = "gpio uartf",
+- .mask = RT3883_GPIO_MODE_GPIO_UARTF,
+- .gpio_first = RT3883_GPIO_7,
+- .gpio_last = RT3883_GPIO_10,
+- }, {
+- .name = "gpio i2s",
+- .mask = RT3883_GPIO_MODE_GPIO_I2S,
+- .gpio_first = RT3883_GPIO_7,
+- .gpio_last = RT3883_GPIO_10,
+- }, {
+- .name = "gpio",
+- .mask = RT3883_GPIO_MODE_GPIO,
+- }, {0}
++static struct rt2880_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 15, 2) };
++static struct rt2880_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) };
++static struct rt2880_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) };
++static struct rt2880_pmx_func lna_a_func[] = { FUNC("lna a", 0, 32, 3) };
++static struct rt2880_pmx_func lna_g_func[] = { FUNC("lna a", 0, 35, 3) };
++static struct rt2880_pmx_func pci_func[] = {
++ FUNC("pci-dev", 0, 40, 32),
++ FUNC("pci-host2", 1, 40, 32),
++ FUNC("pci-host1", 2, 40, 32),
++ FUNC("pci-fnc", 3, 40, 32)
+ };
+-
+-static struct ralink_pinmux_grp pci_mux[] = {
+- {
+- .name = "pci-dev",
+- .mask = 0,
+- .gpio_first = RT3883_GPIO_PCI_AD0,
+- .gpio_last = RT3883_GPIO_PCI_AD31,
+- }, {
+- .name = "pci-host2",
+- .mask = 1,
+- .gpio_first = RT3883_GPIO_PCI_AD0,
+- .gpio_last = RT3883_GPIO_PCI_AD31,
+- }, {
+- .name = "pci-host1",
+- .mask = 2,
+- .gpio_first = RT3883_GPIO_PCI_AD0,
+- .gpio_last = RT3883_GPIO_PCI_AD31,
+- }, {
+- .name = "pci-fnc",
+- .mask = 3,
+- .gpio_first = RT3883_GPIO_PCI_AD0,
+- .gpio_last = RT3883_GPIO_PCI_AD31,
+- }, {
+- .name = "pci-gpio",
+- .mask = 7,
+- .gpio_first = RT3883_GPIO_PCI_AD0,
+- .gpio_last = RT3883_GPIO_PCI_AD31,
+- }, {0}
++static struct rt2880_pmx_func ge1_func[] = { FUNC("ge1", 0, 72, 12) };
++static struct rt2880_pmx_func ge2_func[] = { FUNC("ge1", 0, 84, 12) };
++
++static struct rt2880_pmx_group rt3883_pinmux_data[] = {
++ GRP("i2c", i2c_func, 1, RT3883_GPIO_MODE_I2C),
++ GRP("spi", spi_func, 1, RT3883_GPIO_MODE_SPI),
++ GRP("uartf", uartf_func, RT3883_GPIO_MODE_UART0_MASK,
++ RT3883_GPIO_MODE_UART0_SHIFT),
++ GRP("uartlite", uartlite_func, 1, RT3883_GPIO_MODE_UART1),
++ GRP("jtag", jtag_func, 1, RT3883_GPIO_MODE_JTAG),
++ GRP("mdio", mdio_func, 1, RT3883_GPIO_MODE_MDIO),
++ GRP("lna a", lna_a_func, 1, RT3883_GPIO_MODE_LNA_A),
++ GRP("lna g", lna_g_func, 1, RT3883_GPIO_MODE_LNA_G),
++ GRP("pci", pci_func, RT3883_GPIO_MODE_PCI_MASK,
++ RT3883_GPIO_MODE_PCI_SHIFT),
++ GRP("ge1", ge1_func, 1, RT3883_GPIO_MODE_GE1),
++ GRP("ge2", ge2_func, 1, RT3883_GPIO_MODE_GE2),
++ { 0 }
+ };
+
+ static void rt3883_wdt_reset(void)
+@@ -155,17 +73,6 @@ static void rt3883_wdt_reset(void)
+ rt_sysc_w32(t, RT3883_SYSC_REG_SYSCFG1);
+ }
+
+-struct ralink_pinmux rt_gpio_pinmux = {
+- .mode = mode_mux,
+- .uart = uart_mux,
+- .uart_shift = RT3883_GPIO_MODE_UART0_SHIFT,
+- .uart_mask = RT3883_GPIO_MODE_UART0_MASK,
+- .wdt_reset = rt3883_wdt_reset,
+- .pci = pci_mux,
+- .pci_shift = RT3883_GPIO_MODE_PCI_SHIFT,
+- .pci_mask = RT3883_GPIO_MODE_PCI_MASK,
+-};
+-
+ void __init ralink_clk_init(void)
+ {
+ unsigned long cpu_rate, sys_rate;
+@@ -244,4 +151,6 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
+ soc_info->mem_base = RT3883_SDRAM_BASE;
+ soc_info->mem_size_min = RT3883_MEM_SIZE_MIN;
+ soc_info->mem_size_max = RT3883_MEM_SIZE_MAX;
++
++ rt2880_pinmux_data = rt3883_pinmux_data;
+ }
+diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
+index 1e4e693..1ff1491 100644
+--- a/drivers/pinctrl/Kconfig
++++ b/drivers/pinctrl/Kconfig
+@@ -198,6 +198,11 @@ config PINCTRL_LANTIQ
+ select PINMUX
+ select PINCONF
+
++config PINCTRL_RT2880
++ bool
++ depends on RALINK
++ select PINMUX
++
+ config PINCTRL_FALCON
+ bool
+ depends on SOC_FALCON
+diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
+index 4b83588..3160836 100644
+--- a/drivers/pinctrl/Makefile
++++ b/drivers/pinctrl/Makefile
+@@ -45,6 +45,7 @@ obj-$(CONFIG_PINCTRL_DB8500) += pinctrl-nomadik-db8500.o
+ obj-$(CONFIG_PINCTRL_DB8540) += pinctrl-nomadik-db8540.o
+ obj-$(CONFIG_PINCTRL_PALMAS) += pinctrl-palmas.o
+ obj-$(CONFIG_PINCTRL_ROCKCHIP) += pinctrl-rockchip.o
++obj-$(CONFIG_PINCTRL_RT2880) += pinctrl-rt2880.o
+ obj-$(CONFIG_PINCTRL_SINGLE) += pinctrl-single.o
+ obj-$(CONFIG_PINCTRL_SIRF) += sirf/
+ obj-$(CONFIG_PINCTRL_SUNXI) += pinctrl-sunxi.o
+diff --git a/drivers/pinctrl/pinctrl-rt2880.c b/drivers/pinctrl/pinctrl-rt2880.c
+new file mode 100644
+index 0000000..378ed52
+--- /dev/null
++++ b/drivers/pinctrl/pinctrl-rt2880.c
+@@ -0,0 +1,467 @@
++/*
++ * linux/drivers/pinctrl/pinctrl-rt2880.c
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * publishhed by the Free Software Foundation.
++ *
++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/module.h>
++#include <linux/device.h>
++#include <linux/io.h>
++#include <linux/platform_device.h>
++#include <linux/slab.h>
++#include <linux/of.h>
++#include <linux/pinctrl/pinctrl.h>
++#include <linux/pinctrl/pinconf.h>
++#include <linux/pinctrl/pinmux.h>
++#include <linux/pinctrl/consumer.h>
++#include <linux/pinctrl/machine.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++#include <asm/mach-ralink/pinmux.h>
++#include <asm/mach-ralink/mt7620.h>
++
++#include "core.h"
++
++#define SYSC_REG_GPIO_MODE 0x60
++
++struct rt2880_priv {
++ struct device *dev;
++
++ struct pinctrl_pin_desc *pads;
++ struct pinctrl_desc *desc;
++
++ struct rt2880_pmx_func **func;
++ int func_count;
++
++ struct rt2880_pmx_group *groups;
++ const char **group_names;
++ int group_count;
++
++ uint8_t *gpio;
++ int max_pins;
++};
++
++struct rt2880_pmx_group *rt2880_pinmux_data = NULL;
++
++static int rt2880_get_group_count(struct pinctrl_dev *pctrldev)
++{
++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
++
++ return p->group_count;
++}
++
++static const char *rt2880_get_group_name(struct pinctrl_dev *pctrldev,
++ unsigned group)
++{
++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
++
++ if (group >= p->group_count)
++ return NULL;
++
++ return p->group_names[group];
++}
++
++static int rt2880_get_group_pins(struct pinctrl_dev *pctrldev,
++ unsigned group,
++ const unsigned **pins,
++ unsigned *num_pins)
++{
++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
++
++ if (group >= p->group_count)
++ return -EINVAL;
++
++ *pins = p->groups[group].func[0].pins;
++ *num_pins = p->groups[group].func[0].pin_count;
++
++ return 0;
++}
++
++static void rt2880_pinctrl_dt_free_map(struct pinctrl_dev *pctrldev,
++ struct pinctrl_map *map, unsigned num_maps)
++{
++ int i;
++
++ for (i = 0; i < num_maps; i++)
++ if (map[i].type == PIN_MAP_TYPE_CONFIGS_PIN ||
++ map[i].type == PIN_MAP_TYPE_CONFIGS_GROUP)
++ kfree(map[i].data.configs.configs);
++ kfree(map);
++}
++
++static void rt2880_pinctrl_pin_dbg_show(struct pinctrl_dev *pctrldev,
++ struct seq_file *s,
++ unsigned offset)
++{
++ seq_printf(s, "ralink pio");
++}
++
++static void rt2880_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctrldev,
++ struct device_node *np,
++ struct pinctrl_map **map)
++{
++ const char *function;
++ int func = of_property_read_string(np, "ralink,function", &function);
++ int grps = of_property_count_strings(np, "ralink,group");
++ int i;
++
++ if (func || !grps)
++ return;
++
++ for (i = 0; i < grps; i++) {
++ const char *group;
++
++ of_property_read_string_index(np, "ralink,group", i, &group);
++
++ (*map)->type = PIN_MAP_TYPE_MUX_GROUP;
++ (*map)->name = function;
++ (*map)->data.mux.group = group;
++ (*map)->data.mux.function = function;
++ (*map)++;
++ }
++}
++
++static int rt2880_pinctrl_dt_node_to_map(struct pinctrl_dev *pctrldev,
++ struct device_node *np_config,
++ struct pinctrl_map **map,
++ unsigned *num_maps)
++{
++ int max_maps = 0;
++ struct pinctrl_map *tmp;
++ struct device_node *np;
++
++ for_each_child_of_node(np_config, np) {
++ int ret = of_property_count_strings(np, "ralink,group");
++
++ if (ret >= 0)
++ max_maps += ret;
++ }
++
++ if (!max_maps)
++ return max_maps;
++
++ *map = kzalloc(max_maps * sizeof(struct pinctrl_map), GFP_KERNEL);
++ if (!*map)
++ return -ENOMEM;
++
++ tmp = *map;
++
++ for_each_child_of_node(np_config, np)
++ rt2880_pinctrl_dt_subnode_to_map(pctrldev, np, &tmp);
++ *num_maps = max_maps;
++
++ return 0;
++}
++
++static const struct pinctrl_ops rt2880_pctrl_ops = {
++ .get_groups_count = rt2880_get_group_count,
++ .get_group_name = rt2880_get_group_name,
++ .get_group_pins = rt2880_get_group_pins,
++ .pin_dbg_show = rt2880_pinctrl_pin_dbg_show,
++ .dt_node_to_map = rt2880_pinctrl_dt_node_to_map,
++ .dt_free_map = rt2880_pinctrl_dt_free_map,
++};
++
++static int rt2880_pmx_func_count(struct pinctrl_dev *pctrldev)
++{
++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
++
++ return p->func_count;
++}
++
++static const char *rt2880_pmx_func_name(struct pinctrl_dev *pctrldev,
++ unsigned func)
++{
++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
++
++ return p->func[func]->name;
++}
++
++static int rt2880_pmx_group_get_groups(struct pinctrl_dev *pctrldev,
++ unsigned func,
++ const char * const **groups,
++ unsigned * const num_groups)
++{
++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
++
++ if (p->func[func]->group_count == 1)
++ *groups = &p->group_names[p->func[func]->groups[0]];
++ else
++ *groups = p->group_names;
++
++ *num_groups = p->func[func]->group_count;
++
++ return 0;
++}
++
++static int rt2880_pmx_group_enable(struct pinctrl_dev *pctrldev,
++ unsigned func,
++ unsigned group)
++{
++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
++ u32 mode = 0;
++ int i;
++
++ /* dont allow double use */
++ if (p->groups[group].enabled) {
++ dev_err(p->dev, "%s is already enabled\n", p->groups[group].name);
++ return -EBUSY;
++ }
++
++ p->groups[group].enabled = 1;
++ p->func[func]->enabled = 1;
++
++ mode = rt_sysc_r32(SYSC_REG_GPIO_MODE);
++ mode &= ~(p->groups[group].mask << p->groups[group].shift);
++
++ /* mark the pins as gpio */
++ for (i = 0; i < p->groups[group].func[0].pin_count; i++)
++ p->gpio[p->groups[group].func[0].pins[i]] = 1;
++
++ /* function 0 is gpio and needs special handling */
++ if (func == 0) {
++ mode |= p->groups[group].gpio << p->groups[group].shift;
++ } else {
++ for (i = 0; i < p->func[func]->pin_count; i++)
++ p->gpio[p->func[func]->pins[i]] = 0;
++ mode |= p->func[func]->value << p->groups[group].shift;
++ }
++ rt_sysc_w32(mode, SYSC_REG_GPIO_MODE);
++
++
++ return 0;
++}
++
++static int rt2880_pmx_group_gpio_request_enable(struct pinctrl_dev *pctrldev,
++ struct pinctrl_gpio_range *range,
++ unsigned pin)
++{
++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
++
++ if (!p->gpio[pin]) {
++ dev_err(p->dev, "pin %d is not set to gpio mux\n", pin);
++ return -EINVAL;
++ }
++
++ return 0;
++}
++
++static const struct pinmux_ops rt2880_pmx_group_ops = {
++ .get_functions_count = rt2880_pmx_func_count,
++ .get_function_name = rt2880_pmx_func_name,
++ .get_function_groups = rt2880_pmx_group_get_groups,
++ .enable = rt2880_pmx_group_enable,
++ .gpio_request_enable = rt2880_pmx_group_gpio_request_enable,
++};
++
++static struct pinctrl_desc rt2880_pctrl_desc = {
++ .owner = THIS_MODULE,
++ .name = "rt2880-pinmux",
++ .pctlops = &rt2880_pctrl_ops,
++ .pmxops = &rt2880_pmx_group_ops,
++};
++
++static struct rt2880_pmx_func gpio_func = {
++ .name = "gpio",
++};
++
++static int rt2880_pinmux_index(struct rt2880_priv *p)
++{
++ struct rt2880_pmx_func **f;
++ struct rt2880_pmx_group *mux = p->groups;
++ int i, j, c = 0;
++
++ /* count the mux functions */
++ while (mux->name) {
++ p->group_count++;
++ mux++;
++ }
++
++ /* allocate the group names array needed by the gpio function */
++ p->group_names = devm_kzalloc(p->dev, sizeof(char *) * p->group_count, GFP_KERNEL);
++ if (!p->group_names)
++ return -1;
++
++ for (i = 0; i < p->group_count; i++) {
++ p->group_names[i] = p->groups[i].name;
++ p->func_count += p->groups[i].func_count;
++ }
++
++ /* we have a dummy function[0] for gpio */
++ p->func_count++;
++
++ /* allocate our function and group mapping index buffers */
++ f = p->func = devm_kzalloc(p->dev, sizeof(struct rt2880_pmx_func) * p->func_count, GFP_KERNEL);
++ gpio_func.groups = devm_kzalloc(p->dev, sizeof(int) * p->group_count, GFP_KERNEL);
++ if (!f || !gpio_func.groups)
++ return -1;
++
++ /* add a backpointer to the function so it knows its group */
++ gpio_func.group_count = p->group_count;
++ for (i = 0; i < gpio_func.group_count; i++)
++ gpio_func.groups[i] = i;
++
++ f[c] = &gpio_func;
++ c++;
++
++ /* add remaining functions */
++ for (i = 0; i < p->group_count; i++) {
++ for (j = 0; j < p->groups[i].func_count; j++) {
++ f[c] = &p->groups[i].func[j];
++ f[c]->groups = devm_kzalloc(p->dev, sizeof(int), GFP_KERNEL);
++ f[c]->groups[0] = i;
++ f[c]->group_count = 1;
++ c++;
++ }
++ }
++ return 0;
++}
++
++static int rt2880_pinmux_pins(struct rt2880_priv *p)
++{
++ int i, j;
++
++ /* loop over the functions and initialize the pins array. also work out the highest pin used */
++ for (i = 0; i < p->func_count; i++) {
++ int pin;
++
++ if (!p->func[i]->pin_count)
++ continue;
++
++ p->func[i]->pins = devm_kzalloc(p->dev, sizeof(int) * p->func[i]->pin_count, GFP_KERNEL);
++ for (j = 0; j < p->func[i]->pin_count; j++)
++ p->func[i]->pins[j] = p->func[i]->pin_first + j;
++
++ pin = p->func[i]->pin_first + p->func[i]->pin_count;
++ if (pin > p->max_pins)
++ p->max_pins = pin;
++ }
++
++ /* the buffer that tells us which pins are gpio */
++ p->gpio = devm_kzalloc(p->dev,sizeof(uint8_t) * p->max_pins,
++ GFP_KERNEL);
++ /* the pads needed to tell pinctrl about our pins */
++ p->pads = devm_kzalloc(p->dev,
++ sizeof(struct pinctrl_pin_desc) * p->max_pins,
++ GFP_KERNEL);
++ if (!p->pads || !p->gpio ) {
++ dev_err(p->dev, "Failed to allocate gpio data\n");
++ return -ENOMEM;
++ }
++
++ memset(p->gpio, 1, sizeof(uint8_t) * p->max_pins);
++ for (i = 0; i < p->func_count; i++) {
++ if (!p->func[i]->pin_count)
++ continue;
++
++ for (j = 0; j < p->func[i]->pin_count; j++)
++ p->gpio[p->func[i]->pins[j]] = 0;
++ }
++
++ /* pin 0 is always a gpio */
++ p->gpio[0] = 1;
++
++ /* set the pads */
++ for (i = 0; i < p->max_pins; i++) {
++ /* strlen("ioXY") + 1 = 5 */
++ char *name = devm_kzalloc(p->dev, 5, GFP_KERNEL);
++
++ if (!name) {
++ dev_err(p->dev, "Failed to allocate pad name\n");
++ return -ENOMEM;
++ }
++ snprintf(name, 5, "io%d", i);
++ p->pads[i].number = i;
++ p->pads[i].name = name;
++ }
++ p->desc->pins = p->pads;
++ p->desc->npins = p->max_pins;
++
++ return 0;
++}
++
++static int rt2880_pinmux_probe(struct platform_device *pdev)
++{
++ struct rt2880_priv *p;
++ struct pinctrl_dev *dev;
++ struct device_node *np;
++
++ if (!rt2880_pinmux_data)
++ return -ENOSYS;
++
++ /* setup the private data */
++ p = devm_kzalloc(&pdev->dev, sizeof(struct rt2880_priv), GFP_KERNEL);
++ if (!p)
++ return -ENOMEM;
++
++ p->dev = &pdev->dev;
++ p->desc = &rt2880_pctrl_desc;
++ p->groups = rt2880_pinmux_data;
++ platform_set_drvdata(pdev, p);
++
++ /* init the device */
++ if (rt2880_pinmux_index(p)) {
++ dev_err(&pdev->dev, "failed to load index\n");
++ return -EINVAL;
++ }
++ if (rt2880_pinmux_pins(p)) {
++ dev_err(&pdev->dev, "failed to load pins\n");
++ return -EINVAL;
++ }
++ dev = pinctrl_register(p->desc, &pdev->dev, p);
++ if (IS_ERR(dev))
++ return PTR_ERR(dev);
++
++ /* finalize by adding gpio ranges for enables gpio controllers */
++ for_each_compatible_node(np, NULL, "ralink,rt2880-gpio") {
++ const __be32 *ngpio, *gpiobase;
++ struct pinctrl_gpio_range *range;
++ char *name;
++
++ if (!of_device_is_available(np))
++ continue;
++
++ ngpio = of_get_property(np, "ralink,num-gpios", NULL);
++ gpiobase = of_get_property(np, "ralink,gpio-base", NULL);
++ if (!ngpio || !gpiobase) {
++ dev_err(&pdev->dev, "failed to load chip info\n");
++ return -EINVAL;
++ }
++
++ range = devm_kzalloc(p->dev, sizeof(struct pinctrl_gpio_range) + 4, GFP_KERNEL);
++ range->name = name = (char *) &range[1];
++ sprintf(name, "pio");
++ range->npins = __be32_to_cpu(*ngpio);
++ range->base = __be32_to_cpu(*gpiobase);
++ range->pin_base = range->base;
++ pinctrl_add_gpio_range(dev, range);
++ }
++
++ return 0;
++}
++
++static const struct of_device_id rt2880_pinmux_match[] = {
++ { .compatible = "ralink,rt2880-pinmux" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, rt2880_pinmux_match);
++
++static struct platform_driver rt2880_pinmux_driver = {
++ .probe = rt2880_pinmux_probe,
++ .driver = {
++ .name = "rt2880-pinmux",
++ .owner = THIS_MODULE,
++ .of_match_table = rt2880_pinmux_match,
++ },
++};
++
++int __init rt2880_pinmux_init(void)
++{
++ return platform_driver_register(&rt2880_pinmux_driver);
++}
++
++core_initcall_sync(rt2880_pinmux_init);
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0031-PCI-MIPS-adds-rt2880-pci-support.patch b/target/linux/ramips/patches-3.14/0031-PCI-MIPS-adds-rt2880-pci-support.patch
new file mode 100644
index 0000000000..3af4da6e12
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0031-PCI-MIPS-adds-rt2880-pci-support.patch
@@ -0,0 +1,329 @@
+From 5b0bcc314005dd14eeae190948165a81eef7da1f Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 27 Jul 2014 09:36:02 +0100
+Subject: [PATCH 31/57] PCI: MIPS: adds rt2880 pci support
+
+Add support for the pci found on the rt2880 SoC.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/pci/Makefile | 1 +
+ arch/mips/pci/pci-rt2880.c | 281 ++++++++++++++++++++++++++++++++++++++++++++
+ arch/mips/ralink/Kconfig | 1 +
+ 3 files changed, 283 insertions(+)
+ create mode 100644 arch/mips/pci/pci-rt2880.c
+
+diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
+index d054bc8..6a0f453 100644
+--- a/arch/mips/pci/Makefile
++++ b/arch/mips/pci/Makefile
+@@ -42,6 +42,7 @@ obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o
+ obj-$(CONFIG_LANTIQ) += fixup-lantiq.o
+ obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o
+ obj-$(CONFIG_SOC_MT7621) += pci-mt7621.o
++obj-$(CONFIG_SOC_RT2880) += pci-rt2880.o
+ obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o
+ obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
+ obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o
+diff --git a/arch/mips/pci/pci-rt2880.c b/arch/mips/pci/pci-rt2880.c
+new file mode 100644
+index 0000000..e2c4730
+--- /dev/null
++++ b/arch/mips/pci/pci-rt2880.c
+@@ -0,0 +1,281 @@
++/*
++ * Ralink RT288x SoC PCI register definitions
++ *
++ * Copyright (C) 2009 John Crispin <blogic@openwrt.org>
++ * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * Parts of this file are based on Ralink's 2.6.21 BSP
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/types.h>
++#include <linux/pci.h>
++#include <linux/io.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/of_platform.h>
++#include <linux/of_irq.h>
++#include <linux/of_pci.h>
++
++#include <asm/mach-ralink/rt288x.h>
++
++#define RT2880_PCI_BASE 0x00440000
++#define RT288X_CPU_IRQ_PCI 4
++
++#define RT2880_PCI_MEM_BASE 0x20000000
++#define RT2880_PCI_MEM_SIZE 0x10000000
++#define RT2880_PCI_IO_BASE 0x00460000
++#define RT2880_PCI_IO_SIZE 0x00010000
++
++#define RT2880_PCI_REG_PCICFG_ADDR 0x00
++#define RT2880_PCI_REG_PCIMSK_ADDR 0x0c
++#define RT2880_PCI_REG_BAR0SETUP_ADDR 0x10
++#define RT2880_PCI_REG_IMBASEBAR0_ADDR 0x18
++#define RT2880_PCI_REG_CONFIG_ADDR 0x20
++#define RT2880_PCI_REG_CONFIG_DATA 0x24
++#define RT2880_PCI_REG_MEMBASE 0x28
++#define RT2880_PCI_REG_IOBASE 0x2c
++#define RT2880_PCI_REG_ID 0x30
++#define RT2880_PCI_REG_CLASS 0x34
++#define RT2880_PCI_REG_SUBID 0x38
++#define RT2880_PCI_REG_ARBCTL 0x80
++
++static void __iomem *rt2880_pci_base;
++static DEFINE_SPINLOCK(rt2880_pci_lock);
++
++static u32 rt2880_pci_reg_read(u32 reg)
++{
++ return readl(rt2880_pci_base + reg);
++}
++
++static void rt2880_pci_reg_write(u32 val, u32 reg)
++{
++ writel(val, rt2880_pci_base + reg);
++}
++
++static inline u32 rt2880_pci_get_cfgaddr(unsigned int bus, unsigned int slot,
++ unsigned int func, unsigned int where)
++{
++ return ((bus << 16) | (slot << 11) | (func << 8) | (where & 0xfc) |
++ 0x80000000);
++}
++
++static int rt2880_pci_config_read(struct pci_bus *bus, unsigned int devfn,
++ int where, int size, u32 *val)
++{
++ unsigned long flags;
++ u32 address;
++ u32 data;
++
++ address = rt2880_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn),
++ PCI_FUNC(devfn), where);
++
++ spin_lock_irqsave(&rt2880_pci_lock, flags);
++ rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR);
++ data = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA);
++ spin_unlock_irqrestore(&rt2880_pci_lock, flags);
++
++ switch (size) {
++ case 1:
++ *val = (data >> ((where & 3) << 3)) & 0xff;
++ break;
++ case 2:
++ *val = (data >> ((where & 3) << 3)) & 0xffff;
++ break;
++ case 4:
++ *val = data;
++ break;
++ }
++
++ return PCIBIOS_SUCCESSFUL;
++}
++
++static int rt2880_pci_config_write(struct pci_bus *bus, unsigned int devfn,
++ int where, int size, u32 val)
++{
++ unsigned long flags;
++ u32 address;
++ u32 data;
++
++ address = rt2880_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn),
++ PCI_FUNC(devfn), where);
++
++ spin_lock_irqsave(&rt2880_pci_lock, flags);
++ rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR);
++ data = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA);
++
++ switch (size) {
++ case 1:
++ data = (data & ~(0xff << ((where & 3) << 3))) |
++ (val << ((where & 3) << 3));
++ break;
++ case 2:
++ data = (data & ~(0xffff << ((where & 3) << 3))) |
++ (val << ((where & 3) << 3));
++ break;
++ case 4:
++ data = val;
++ break;
++ }
++
++ rt2880_pci_reg_write(data, RT2880_PCI_REG_CONFIG_DATA);
++ spin_unlock_irqrestore(&rt2880_pci_lock, flags);
++
++ return PCIBIOS_SUCCESSFUL;
++}
++
++static struct pci_ops rt2880_pci_ops = {
++ .read = rt2880_pci_config_read,
++ .write = rt2880_pci_config_write,
++};
++
++static struct resource rt2880_pci_mem_resource = {
++ .name = "PCI MEM space",
++ .start = RT2880_PCI_MEM_BASE,
++ .end = RT2880_PCI_MEM_BASE + RT2880_PCI_MEM_SIZE - 1,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct resource rt2880_pci_io_resource = {
++ .name = "PCI IO space",
++ .start = RT2880_PCI_IO_BASE,
++ .end = RT2880_PCI_IO_BASE + RT2880_PCI_IO_SIZE - 1,
++ .flags = IORESOURCE_IO,
++};
++
++static struct pci_controller rt2880_pci_controller = {
++ .pci_ops = &rt2880_pci_ops,
++ .mem_resource = &rt2880_pci_mem_resource,
++ .io_resource = &rt2880_pci_io_resource,
++};
++
++static inline u32 rt2880_pci_read_u32(unsigned long reg)
++{
++ unsigned long flags;
++ u32 address;
++ u32 ret;
++
++ address = rt2880_pci_get_cfgaddr(0, 0, 0, reg);
++
++ spin_lock_irqsave(&rt2880_pci_lock, flags);
++ rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR);
++ ret = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA);
++ spin_unlock_irqrestore(&rt2880_pci_lock, flags);
++
++ return ret;
++}
++
++static inline void rt2880_pci_write_u32(unsigned long reg, u32 val)
++{
++ unsigned long flags;
++ u32 address;
++
++ address = rt2880_pci_get_cfgaddr(0, 0, 0, reg);
++
++ spin_lock_irqsave(&rt2880_pci_lock, flags);
++ rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR);
++ rt2880_pci_reg_write(val, RT2880_PCI_REG_CONFIG_DATA);
++ spin_unlock_irqrestore(&rt2880_pci_lock, flags);
++}
++
++int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
++{
++ u16 cmd;
++ int irq = -1;
++
++ if (dev->bus->number != 0)
++ return irq;
++
++ switch (PCI_SLOT(dev->devfn)) {
++ case 0x00:
++ rt2880_pci_write_u32(PCI_BASE_ADDRESS_0, 0x08000000);
++ (void) rt2880_pci_read_u32(PCI_BASE_ADDRESS_0);
++ break;
++ case 0x11:
++ irq = RT288X_CPU_IRQ_PCI;
++ break;
++ default:
++ printk("%s:%s[%d] trying to alloc unknown pci irq\n",
++ __FILE__, __func__, __LINE__);
++ BUG();
++ break;
++ }
++
++ pci_write_config_byte((struct pci_dev*)dev, PCI_CACHE_LINE_SIZE, 0x14);
++ pci_write_config_byte((struct pci_dev*)dev, PCI_LATENCY_TIMER, 0xFF);
++ pci_read_config_word((struct pci_dev*)dev, PCI_COMMAND, &cmd);
++ cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
++ PCI_COMMAND_INVALIDATE | PCI_COMMAND_FAST_BACK |
++ PCI_COMMAND_SERR | PCI_COMMAND_WAIT | PCI_COMMAND_PARITY;
++ pci_write_config_word((struct pci_dev*)dev, PCI_COMMAND, cmd);
++ pci_write_config_byte((struct pci_dev*)dev, PCI_INTERRUPT_LINE,
++ dev->irq);
++ return irq;
++}
++
++static int rt288x_pci_probe(struct platform_device *pdev)
++{
++ void __iomem *io_map_base;
++ int i;
++
++ rt2880_pci_base = ioremap_nocache(RT2880_PCI_BASE, PAGE_SIZE);
++
++ io_map_base = ioremap(RT2880_PCI_IO_BASE, RT2880_PCI_IO_SIZE);
++ rt2880_pci_controller.io_map_base = (unsigned long) io_map_base;
++ set_io_port_base((unsigned long) io_map_base);
++
++ ioport_resource.start = RT2880_PCI_IO_BASE;
++ ioport_resource.end = RT2880_PCI_IO_BASE + RT2880_PCI_IO_SIZE - 1;
++
++ rt2880_pci_reg_write(0, RT2880_PCI_REG_PCICFG_ADDR);
++ for(i = 0; i < 0xfffff; i++) {}
++
++ rt2880_pci_reg_write(0x79, RT2880_PCI_REG_ARBCTL);
++ rt2880_pci_reg_write(0x07FF0001, RT2880_PCI_REG_BAR0SETUP_ADDR);
++ rt2880_pci_reg_write(RT2880_PCI_MEM_BASE, RT2880_PCI_REG_MEMBASE);
++ rt2880_pci_reg_write(RT2880_PCI_IO_BASE, RT2880_PCI_REG_IOBASE);
++ rt2880_pci_reg_write(0x08000000, RT2880_PCI_REG_IMBASEBAR0_ADDR);
++ rt2880_pci_reg_write(0x08021814, RT2880_PCI_REG_ID);
++ rt2880_pci_reg_write(0x00800001, RT2880_PCI_REG_CLASS);
++ rt2880_pci_reg_write(0x28801814, RT2880_PCI_REG_SUBID);
++ rt2880_pci_reg_write(0x000c0000, RT2880_PCI_REG_PCIMSK_ADDR);
++
++ rt2880_pci_write_u32(PCI_BASE_ADDRESS_0, 0x08000000);
++ (void) rt2880_pci_read_u32(PCI_BASE_ADDRESS_0);
++
++ register_pci_controller(&rt2880_pci_controller);
++ return 0;
++}
++
++int pcibios_plat_dev_init(struct pci_dev *dev)
++{
++ return 0;
++}
++
++static const struct of_device_id rt288x_pci_match[] = {
++ { .compatible = "ralink,rt288x-pci" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, rt288x_pci_match);
++
++static struct platform_driver rt288x_pci_driver = {
++ .probe = rt288x_pci_probe,
++ .driver = {
++ .name = "rt288x-pci",
++ .owner = THIS_MODULE,
++ .of_match_table = rt288x_pci_match,
++ },
++};
++
++int __init pcibios_init(void)
++{
++ int ret = platform_driver_register(&rt288x_pci_driver);
++ if (ret)
++ pr_info("rt288x-pci: Error registering platform driver!");
++ return ret;
++}
++
++arch_initcall(pcibios_init);
+diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
+index f93835f..eb2b2cd 100644
+--- a/arch/mips/ralink/Kconfig
++++ b/arch/mips/ralink/Kconfig
+@@ -21,6 +21,7 @@ choice
+ config SOC_RT288X
+ bool "RT288x"
+ select MIPS_L1_CACHE_SHIFT_4
++ select HW_HAS_PCI
+
+ config SOC_RT305X
+ bool "RT305x"
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0032-PCI-MIPS-adds-mt7620a-pcie-driver.patch b/target/linux/ramips/patches-3.14/0032-PCI-MIPS-adds-mt7620a-pcie-driver.patch
new file mode 100644
index 0000000000..48dae703cb
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0032-PCI-MIPS-adds-mt7620a-pcie-driver.patch
@@ -0,0 +1,409 @@
+From 307b7a71a634ae3848fb7c5c05759d647e140e12 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sat, 18 May 2013 22:06:15 +0200
+Subject: [PATCH 32/57] PCI: MIPS: adds mt7620a pcie driver
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/pci/Makefile | 1 +
+ arch/mips/pci/pci-mt7620a.c | 363 +++++++++++++++++++++++++++++++++++++++++++
+ arch/mips/ralink/Kconfig | 1 +
+ 3 files changed, 365 insertions(+)
+ create mode 100644 arch/mips/pci/pci-mt7620a.c
+
+diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
+index 6a0f453..b140299 100644
+--- a/arch/mips/pci/Makefile
++++ b/arch/mips/pci/Makefile
+@@ -42,6 +42,7 @@ obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o
+ obj-$(CONFIG_LANTIQ) += fixup-lantiq.o
+ obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o
+ obj-$(CONFIG_SOC_MT7621) += pci-mt7621.o
++obj-$(CONFIG_SOC_MT7620) += pci-mt7620a.o
+ obj-$(CONFIG_SOC_RT2880) += pci-rt2880.o
+ obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o
+ obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
+diff --git a/arch/mips/pci/pci-mt7620a.c b/arch/mips/pci/pci-mt7620a.c
+new file mode 100644
+index 0000000..271763c
+--- /dev/null
++++ b/arch/mips/pci/pci-mt7620a.c
+@@ -0,0 +1,363 @@
++/*
++ * Ralink MT7620A SoC PCI support
++ *
++ * Copyright (C) 2007-2013 Bruce Chang
++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/types.h>
++#include <linux/pci.h>
++#include <linux/io.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/of.h>
++#include <linux/of_irq.h>
++#include <linux/of_pci.h>
++#include <linux/reset.h>
++#include <linux/platform_device.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#define RALINK_PCI_MM_MAP_BASE 0x20000000
++#define RALINK_PCI_IO_MAP_BASE 0x10160000
++
++#define RALINK_INT_PCIE0 4
++#define RALINK_SYSTEM_CONTROL_BASE 0xb0000000
++#define RALINK_SYSCFG1 0x14
++#define RALINK_CLKCFG1 0x30
++#define RALINK_GPIOMODE 0x60
++#define RALINK_PCIE_CLK_GEN 0x7c
++#define RALINK_PCIE_CLK_GEN1 0x80
++#define PCIEPHY0_CFG 0x90
++#define PPLL_CFG1 0x9c
++#define PPLL_DRV 0xa0
++#define RALINK_PCI_HOST_MODE_EN (1<<7)
++#define RALINK_PCIE_RC_MODE_EN (1<<8)
++#define RALINK_PCIE_RST (1<<23)
++#define RALINK_PCI_RST (1<<24)
++#define RALINK_PCI_CLK_EN (1<<19)
++#define RALINK_PCIE_CLK_EN (1<<21)
++#define PCI_SLOTx2 (1<<11)
++#define PCI_SLOTx1 (2<<11)
++#define PDRV_SW_SET (1<<31)
++#define LC_CKDRVPD_ (1<<19)
++
++#define RALINK_PCI_CONFIG_ADDR 0x20
++#define RALINK_PCI_CONFIG_DATA_VIRTUAL_REG 0x24
++#define MEMORY_BASE 0x0
++#define RALINK_PCIE0_RST (1<<26)
++#define RALINK_PCI_BASE 0xB0140000
++#define RALINK_PCI_MEMBASE 0x28
++#define RALINK_PCI_IOBASE 0x2C
++
++#define RT6855_PCIE0_OFFSET 0x2000
++
++#define RALINK_PCI_PCICFG_ADDR 0x00
++#define RALINK_PCI0_BAR0SETUP_ADDR 0x10
++#define RALINK_PCI0_IMBASEBAR0_ADDR 0x18
++#define RALINK_PCI0_ID 0x30
++#define RALINK_PCI0_CLASS 0x34
++#define RALINK_PCI0_SUBID 0x38
++#define RALINK_PCI0_STATUS 0x50
++#define RALINK_PCI_PCIMSK_ADDR 0x0C
++
++#define RALINK_PCIE0_CLK_EN (1 << 26)
++
++#define BUSY 0x80000000
++#define WAITRETRY_MAX 10
++#define WRITE_MODE (1UL << 23)
++#define DATA_SHIFT 0
++#define ADDR_SHIFT 8
++
++
++static void __iomem *bridge_base;
++static void __iomem *pcie_base;
++
++static struct reset_control *rstpcie0;
++
++static inline void bridge_w32(u32 val, unsigned reg)
++{
++ iowrite32(val, bridge_base + reg);
++}
++
++static inline u32 bridge_r32(unsigned reg)
++{
++ return ioread32(bridge_base + reg);
++}
++
++static inline void pcie_w32(u32 val, unsigned reg)
++{
++ iowrite32(val, pcie_base + reg);
++}
++
++static inline u32 pcie_r32(unsigned reg)
++{
++ return ioread32(pcie_base + reg);
++}
++
++static inline void pcie_m32(u32 clr, u32 set, unsigned reg)
++{
++ u32 val = pcie_r32(reg);
++ val &= ~clr;
++ val |= set;
++ pcie_w32(val, reg);
++}
++
++int wait_pciephy_busy(void)
++{
++ unsigned long reg_value = 0x0, retry = 0;
++
++ while (1) {
++ //reg_value = rareg(READMODE, PCIEPHY0_CFG, 0);
++ reg_value = pcie_r32(PCIEPHY0_CFG);
++
++ if (reg_value & BUSY)
++ mdelay(100);
++ else
++ break;
++ if (retry++ > WAITRETRY_MAX){
++ printk("PCIE-PHY retry failed.\n");
++ return -1;
++ }
++ }
++ return 0;
++}
++
++static void pcie_phy(unsigned long addr, unsigned long val)
++{
++ wait_pciephy_busy();
++ pcie_w32(WRITE_MODE | (val << DATA_SHIFT) | (addr << ADDR_SHIFT), PCIEPHY0_CFG);
++ mdelay(1);
++ wait_pciephy_busy();
++}
++
++static int pci_config_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val)
++{
++ unsigned int slot = PCI_SLOT(devfn);
++ u8 func = PCI_FUNC(devfn);
++ u32 address;
++ u32 data;
++
++ address = (((where & 0xF00) >> 8) << 24) | (bus->number << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | 0x80000000;
++ bridge_w32(address, RALINK_PCI_CONFIG_ADDR);
++ data = bridge_r32(RALINK_PCI_CONFIG_DATA_VIRTUAL_REG);
++
++ switch (size) {
++ case 1:
++ *val = (data >> ((where & 3) << 3)) & 0xff;
++ break;
++ case 2:
++ *val = (data >> ((where & 3) << 3)) & 0xffff;
++ break;
++ case 4:
++ *val = data;
++ break;
++ }
++
++ return PCIBIOS_SUCCESSFUL;
++}
++
++static int pci_config_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val)
++{
++ unsigned int slot = PCI_SLOT(devfn);
++ u8 func = PCI_FUNC(devfn);
++ u32 address;
++ u32 data;
++
++ address = (((where & 0xF00) >> 8) << 24) | (bus->number << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | 0x80000000;
++ bridge_w32(address, RALINK_PCI_CONFIG_ADDR);
++ data = bridge_r32(RALINK_PCI_CONFIG_DATA_VIRTUAL_REG);
++
++ switch (size) {
++ case 1:
++ data = (data & ~(0xff << ((where & 3) << 3))) |
++ (val << ((where & 3) << 3));
++ break;
++ case 2:
++ data = (data & ~(0xffff << ((where & 3) << 3))) |
++ (val << ((where & 3) << 3));
++ break;
++ case 4:
++ data = val;
++ break;
++ }
++
++ bridge_w32(data, RALINK_PCI_CONFIG_DATA_VIRTUAL_REG);
++
++ return PCIBIOS_SUCCESSFUL;
++}
++
++struct pci_ops mt7620a_pci_ops= {
++ .read = pci_config_read,
++ .write = pci_config_write,
++};
++
++static struct resource mt7620a_res_pci_mem1 = {
++ .name = "pci memory",
++ .start = RALINK_PCI_MM_MAP_BASE,
++ .end = (u32) ((RALINK_PCI_MM_MAP_BASE + (unsigned char *)0x0fffffff)),
++ .flags = IORESOURCE_MEM,
++};
++static struct resource mt7620a_res_pci_io1 = {
++ .name = "pci io",
++ .start = RALINK_PCI_IO_MAP_BASE,
++ .end = (u32) ((RALINK_PCI_IO_MAP_BASE + (unsigned char *)0x0ffff)),
++ .flags = IORESOURCE_IO,
++};
++
++struct pci_controller mt7620a_controller = {
++ .pci_ops = &mt7620a_pci_ops,
++ .mem_resource = &mt7620a_res_pci_mem1,
++ .io_resource = &mt7620a_res_pci_io1,
++ .mem_offset = 0x00000000UL,
++ .io_offset = 0x00000000UL,
++ .io_map_base = 0xa0000000,
++};
++
++static int mt7620a_pci_probe(struct platform_device *pdev)
++{
++ struct resource *bridge_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ struct resource *pcie_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
++
++ rstpcie0 = devm_reset_control_get(&pdev->dev, "pcie0");
++ if (IS_ERR(rstpcie0))
++ return PTR_ERR(rstpcie0);
++
++ bridge_base = devm_request_and_ioremap(&pdev->dev, bridge_res);
++ if (!bridge_base)
++ return -ENOMEM;
++
++ pcie_base = devm_request_and_ioremap(&pdev->dev, pcie_res);
++ if (!pcie_base)
++ return -ENOMEM;
++
++ iomem_resource.start = 0;
++ iomem_resource.end= ~0;
++ ioport_resource.start= 0;
++ ioport_resource.end = ~0;
++
++ /* PCIE: bypass PCIe DLL */
++ pcie_phy(0x0, 0x80);
++ pcie_phy(0x1, 0x04);
++ /* PCIE: Elastic buffer control */
++ pcie_phy(0x68, 0xB4);
++
++ reset_control_assert(rstpcie0);
++ rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
++ rt_sysc_m32(1<<19, 1<<31, PPLL_DRV);
++ rt_sysc_m32(0x3 << 16, 0, RALINK_GPIOMODE);
++
++ reset_control_deassert(rstpcie0);
++ rt_sysc_m32(0, RALINK_PCIE0_CLK_EN, RALINK_CLKCFG1);
++
++ mdelay(100);
++
++ if (!(rt_sysc_r32(PPLL_CFG1) & 1<<23)) {
++ printk("MT7620 PPLL unlock\n");
++ reset_control_assert(rstpcie0);
++ rt_sysc_m32(BIT(26), 0, RALINK_CLKCFG1);
++ return 0;
++ }
++ rt_sysc_m32((0x1<<18) | (0x1<<17), (0x1 << 19) | (0x1 << 31), PPLL_DRV);
++
++ mdelay(100);
++ reset_control_assert(rstpcie0);
++ rt_sysc_m32(0x30, 2 << 4, RALINK_SYSCFG1);
++
++ rt_sysc_m32(~0x7fffffff, 0x80000000, RALINK_PCIE_CLK_GEN);
++ rt_sysc_m32(~0x80ffffff, 0xa << 24, RALINK_PCIE_CLK_GEN1);
++
++ mdelay(50);
++ reset_control_deassert(rstpcie0);
++ pcie_m32(BIT(1), 0, RALINK_PCI_PCICFG_ADDR);
++ mdelay(100);
++
++ if (( pcie_r32(RALINK_PCI0_STATUS) & 0x1) == 0) {
++ reset_control_assert(rstpcie0);
++ rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
++ rt_sysc_m32(LC_CKDRVPD_, PDRV_SW_SET, PPLL_DRV);
++ printk("PCIE0 no card, disable it(RST&CLK)\n");
++ }
++
++ bridge_w32(0xffffffff, RALINK_PCI_MEMBASE);
++ bridge_w32(RALINK_PCI_IO_MAP_BASE, RALINK_PCI_IOBASE);
++
++ pcie_w32(0x7FFF0000, RALINK_PCI0_BAR0SETUP_ADDR);
++ pcie_w32(MEMORY_BASE, RALINK_PCI0_IMBASEBAR0_ADDR);
++ pcie_w32(0x08021814, RALINK_PCI0_ID);
++ pcie_w32(0x06040001, RALINK_PCI0_CLASS);
++ pcie_w32(0x28801814, RALINK_PCI0_SUBID);
++ pcie_m32(0, BIT(20), RALINK_PCI_PCIMSK_ADDR);
++
++ register_pci_controller(&mt7620a_controller);
++
++ return 0;
++}
++
++int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
++{
++ const struct resource *res;
++ u16 cmd;
++ u32 val;
++ int i, irq = 0;
++
++ if ((dev->bus->number == 0) && (slot == 0)) {
++ pcie_w32(0x7FFF0001, RALINK_PCI0_BAR0SETUP_ADDR); //open 7FFF:2G; ENABLE
++ pci_config_write(dev->bus, 0, PCI_BASE_ADDRESS_0, 4, MEMORY_BASE);
++ pci_config_read(dev->bus, 0, PCI_BASE_ADDRESS_0, 4, &val);
++ } else if ((dev->bus->number == 1) && (slot == 0x0)) {
++ irq = RALINK_INT_PCIE0;
++ } else {
++ printk("bus=0x%x, slot = 0x%x\n", dev->bus->number, slot);
++ return 0;
++ }
++
++ for (i = 0; i < 6; i++) {
++ res = &dev->resource[i];
++ }
++
++ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0x14); //configure cache line size 0x14
++ pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xFF); //configure latency timer 0x10
++ pci_read_config_word(dev, PCI_COMMAND, &cmd);
++
++ // FIXME
++ cmd = cmd | PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
++ pci_write_config_word(dev, PCI_COMMAND, cmd);
++ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
++ //pci_write_config_byte(dev, PCI_INTERRUPT_PIN, dev->irq);
++
++ return irq;
++}
++
++int pcibios_plat_dev_init(struct pci_dev *dev)
++{
++ return 0;
++}
++
++static const struct of_device_id mt7620a_pci_ids[] = {
++ { .compatible = "ralink,mt7620a-pci" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, mt7620a_pci_ids);
++
++static struct platform_driver mt7620a_pci_driver = {
++ .probe = mt7620a_pci_probe,
++ .driver = {
++ .name = "mt7620a-pci",
++ .owner = THIS_MODULE,
++ .of_match_table = of_match_ptr(mt7620a_pci_ids),
++ },
++};
++
++static int __init mt7620a_pci_init(void)
++{
++ return platform_driver_register(&mt7620a_pci_driver);
++}
++
++arch_initcall(mt7620a_pci_init);
+diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
+index eb2b2cd..ce84aad 100644
+--- a/arch/mips/ralink/Kconfig
++++ b/arch/mips/ralink/Kconfig
+@@ -39,6 +39,7 @@ choice
+ bool "MT7620/8"
+ select USB_ARCH_HAS_OHCI
+ select USB_ARCH_HAS_EHCI
++ select HW_HAS_PCI
+
+ config SOC_MT7621
+ bool "MT7621"
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0033-NET-multi-phy-support.patch b/target/linux/ramips/patches-3.14/0033-NET-multi-phy-support.patch
new file mode 100644
index 0000000000..99dd092b53
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0033-NET-multi-phy-support.patch
@@ -0,0 +1,60 @@
+From 9c34372c25519234add1cfdfe2b69c0847f2037e Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 27 Jul 2014 09:38:50 +0100
+Subject: [PATCH 33/57] NET: multi phy support
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/net/phy/phy.c | 9 ++++++---
+ include/linux/phy.h | 1 +
+ 2 files changed, 7 insertions(+), 3 deletions(-)
+
+diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
+index 76d96b9..371f0b6 100644
+--- a/drivers/net/phy/phy.c
++++ b/drivers/net/phy/phy.c
+@@ -715,7 +715,8 @@ void phy_state_machine(struct work_struct *work)
+ /* If the link is down, give up on negotiation for now */
+ if (!phydev->link) {
+ phydev->state = PHY_NOLINK;
+- netif_carrier_off(phydev->attached_dev);
++ if (!phydev->no_auto_carrier_off)
++ netif_carrier_off(phydev->attached_dev);
+ phydev->adjust_link(phydev->attached_dev);
+ break;
+ }
+@@ -781,7 +782,8 @@ void phy_state_machine(struct work_struct *work)
+ netif_carrier_on(phydev->attached_dev);
+ } else {
+ phydev->state = PHY_NOLINK;
+- netif_carrier_off(phydev->attached_dev);
++ if (!phydev->no_auto_carrier_off)
++ netif_carrier_off(phydev->attached_dev);
+ }
+
+ phydev->adjust_link(phydev->attached_dev);
+@@ -793,7 +795,8 @@ void phy_state_machine(struct work_struct *work)
+ case PHY_HALTED:
+ if (phydev->link) {
+ phydev->link = 0;
+- netif_carrier_off(phydev->attached_dev);
++ if (!phydev->no_auto_carrier_off)
++ netif_carrier_off(phydev->attached_dev);
+ phydev->adjust_link(phydev->attached_dev);
+ do_suspend = 1;
+ }
+diff --git a/include/linux/phy.h b/include/linux/phy.h
+index 565188c..91b93f7 100644
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -308,6 +308,7 @@ struct phy_device {
+ struct phy_c45_device_ids c45_ids;
+ bool is_c45;
+ bool is_internal;
++ bool no_auto_carrier_off;
+
+ enum phy_state state;
+
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0034-NET-add-of_get_mac_address_mtd.patch b/target/linux/ramips/patches-3.14/0034-NET-add-of_get_mac_address_mtd.patch
new file mode 100644
index 0000000000..0934ac29f3
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0034-NET-add-of_get_mac_address_mtd.patch
@@ -0,0 +1,83 @@
+From 92f38460229a8816404408f036f0a374f1013d0e Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 27 Jul 2014 09:40:01 +0100
+Subject: [PATCH 34/57] NET: add of_get_mac_address_mtd()
+
+Many embedded devices have information such as mac addresses stored inside mtd
+devices. This patch allows us to add a property inside a node describing a
+network interface. The new property points at a mtd partition with an offset
+where the mac address can be found.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/of/of_net.c | 37 +++++++++++++++++++++++++++++++++++++
+ include/linux/of_net.h | 1 +
+ 2 files changed, 38 insertions(+)
+
+diff --git a/drivers/of/of_net.c b/drivers/of/of_net.c
+index a208a45..de93111 100644
+--- a/drivers/of/of_net.c
++++ b/drivers/of/of_net.c
+@@ -10,6 +10,7 @@
+ #include <linux/of_net.h>
+ #include <linux/phy.h>
+ #include <linux/export.h>
++#include <linux/mtd/mtd.h>
+
+ /**
+ * It maps 'enum phy_interface_t' found in include/linux/phy.h
+@@ -94,3 +95,39 @@ const void *of_get_mac_address(struct device_node *np)
+ return NULL;
+ }
+ EXPORT_SYMBOL(of_get_mac_address);
++
++int of_get_mac_address_mtd(struct device_node *np, void *mac)
++{
++ struct device_node *mtd_np = NULL;
++ size_t retlen;
++ int size, ret;
++ struct mtd_info *mtd;
++ const char *part;
++ const __be32 *list;
++ phandle phandle;
++
++ list = of_get_property(np, "mtd-mac-address", &size);
++ if (!list || (size != (2 * sizeof(*list))))
++ return -ENOENT;
++
++ phandle = be32_to_cpup(list++);
++ if (phandle)
++ mtd_np = of_find_node_by_phandle(phandle);
++
++ if (!mtd_np)
++ return -ENOENT;
++
++ part = of_get_property(mtd_np, "label", NULL);
++ if (!part)
++ part = mtd_np->name;
++
++ mtd = get_mtd_device_nm(part);
++ if (IS_ERR(mtd))
++ return PTR_ERR(mtd);
++
++ ret = mtd_read(mtd, be32_to_cpup(list), 6, &retlen, (u_char *) mac);
++ put_mtd_device(mtd);
++
++ return ret;
++}
++EXPORT_SYMBOL_GPL(of_get_mac_address_mtd);
+diff --git a/include/linux/of_net.h b/include/linux/of_net.h
+index 34597c8..cdfbc60 100644
+--- a/include/linux/of_net.h
++++ b/include/linux/of_net.h
+@@ -11,6 +11,7 @@
+ #include <linux/of.h>
+ extern int of_get_phy_mode(struct device_node *np);
+ extern const void *of_get_mac_address(struct device_node *np);
++extern int of_get_mac_address_mtd(struct device_node *np, void *mac);
+ #else
+ static inline int of_get_phy_mode(struct device_node *np)
+ {
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0035-NET-MIPS-add-ralink-SoC-ethernet-driver.patch b/target/linux/ramips/patches-3.14/0035-NET-MIPS-add-ralink-SoC-ethernet-driver.patch
new file mode 100644
index 0000000000..6a7c0c2348
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0035-NET-MIPS-add-ralink-SoC-ethernet-driver.patch
@@ -0,0 +1,5128 @@
+From c55d6cf3e2c593bf7d228c6532ec9bd8da82e09d Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 22 Apr 2013 23:20:03 +0200
+Subject: [PATCH 35/57] NET: MIPS: add ralink SoC ethernet driver
+
+Add support for Ralink FE and ESW.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ .../include/asm/mach-ralink/rt305x_esw_platform.h | 27 +
+ arch/mips/ralink/rt305x.c | 1 +
+ drivers/net/ethernet/Kconfig | 1 +
+ drivers/net/ethernet/Makefile | 1 +
+ drivers/net/ethernet/ralink/Kconfig | 32 +
+ drivers/net/ethernet/ralink/Makefile | 18 +
+ drivers/net/ethernet/ralink/esw_rt3052.c | 1463 ++++++++++++++++++++
+ drivers/net/ethernet/ralink/esw_rt3052.h | 32 +
+ drivers/net/ethernet/ralink/gsw_mt7620a.c | 566 ++++++++
+ drivers/net/ethernet/ralink/gsw_mt7620a.h | 30 +
+ drivers/net/ethernet/ralink/mdio.c | 244 ++++
+ drivers/net/ethernet/ralink/mdio.h | 29 +
+ drivers/net/ethernet/ralink/mdio_rt2880.c | 232 ++++
+ drivers/net/ethernet/ralink/mdio_rt2880.h | 26 +
+ drivers/net/ethernet/ralink/mt7530.c | 579 ++++++++
+ drivers/net/ethernet/ralink/mt7530.h | 20 +
+ drivers/net/ethernet/ralink/ralink_soc_eth.c | 844 +++++++++++
+ drivers/net/ethernet/ralink/ralink_soc_eth.h | 384 +++++
+ drivers/net/ethernet/ralink/soc_mt7620.c | 172 +++
+ drivers/net/ethernet/ralink/soc_rt2880.c | 52 +
+ drivers/net/ethernet/ralink/soc_rt305x.c | 113 ++
+ drivers/net/ethernet/ralink/soc_rt3883.c | 60 +
+ 22 files changed, 4926 insertions(+)
+ create mode 100644 arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h
+ create mode 100644 drivers/net/ethernet/ralink/Kconfig
+ create mode 100644 drivers/net/ethernet/ralink/Makefile
+ create mode 100644 drivers/net/ethernet/ralink/esw_rt3052.c
+ create mode 100644 drivers/net/ethernet/ralink/esw_rt3052.h
+ create mode 100644 drivers/net/ethernet/ralink/gsw_mt7620a.c
+ create mode 100644 drivers/net/ethernet/ralink/gsw_mt7620a.h
+ create mode 100644 drivers/net/ethernet/ralink/mdio.c
+ create mode 100644 drivers/net/ethernet/ralink/mdio.h
+ create mode 100644 drivers/net/ethernet/ralink/mdio_rt2880.c
+ create mode 100644 drivers/net/ethernet/ralink/mdio_rt2880.h
+ create mode 100644 drivers/net/ethernet/ralink/mt7530.c
+ create mode 100644 drivers/net/ethernet/ralink/mt7530.h
+ create mode 100644 drivers/net/ethernet/ralink/ralink_soc_eth.c
+ create mode 100644 drivers/net/ethernet/ralink/ralink_soc_eth.h
+ create mode 100644 drivers/net/ethernet/ralink/soc_mt7620.c
+ create mode 100644 drivers/net/ethernet/ralink/soc_rt2880.c
+ create mode 100644 drivers/net/ethernet/ralink/soc_rt305x.c
+ create mode 100644 drivers/net/ethernet/ralink/soc_rt3883.c
+
+diff --git a/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h b/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h
+new file mode 100644
+index 0000000..2098c5c
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h
+@@ -0,0 +1,27 @@
++/*
++ * Ralink RT305x SoC platform device registration
++ *
++ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#ifndef _RT305X_ESW_PLATFORM_H
++#define _RT305X_ESW_PLATFORM_H
++
++enum {
++ RT305X_ESW_VLAN_CONFIG_NONE = 0,
++ RT305X_ESW_VLAN_CONFIG_LLLLW,
++ RT305X_ESW_VLAN_CONFIG_WLLLL,
++};
++
++struct rt305x_esw_platform_data
++{
++ u8 vlan_config;
++ u32 reg_initval_fct2;
++ u32 reg_initval_fpa2;
++};
++
++#endif /* _RT305X_ESW_PLATFORM_H */
+diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
+index 356d6a0..ef99d78 100644
+--- a/arch/mips/ralink/rt305x.c
++++ b/arch/mips/ralink/rt305x.c
+@@ -199,6 +199,7 @@ void __init ralink_clk_init(void)
+ }
+
+ ralink_clk_add("cpu", cpu_rate);
++ ralink_clk_add("sys", sys_rate);
+ ralink_clk_add("10000b00.spi", sys_rate);
+ ralink_clk_add("10000100.timer", wdt_rate);
+ ralink_clk_add("10000120.watchdog", wdt_rate);
+diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
+index 506b024..ef6a274 100644
+--- a/drivers/net/ethernet/Kconfig
++++ b/drivers/net/ethernet/Kconfig
+@@ -134,6 +134,7 @@ config ETHOC
+ source "drivers/net/ethernet/packetengines/Kconfig"
+ source "drivers/net/ethernet/pasemi/Kconfig"
+ source "drivers/net/ethernet/qlogic/Kconfig"
++source "drivers/net/ethernet/ralink/Kconfig"
+ source "drivers/net/ethernet/realtek/Kconfig"
+ source "drivers/net/ethernet/renesas/Kconfig"
+ source "drivers/net/ethernet/rdc/Kconfig"
+diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
+index c0b8789..7c3eb7b 100644
+--- a/drivers/net/ethernet/Makefile
++++ b/drivers/net/ethernet/Makefile
+@@ -56,6 +56,7 @@ obj-$(CONFIG_ETHOC) += ethoc.o
+ obj-$(CONFIG_NET_PACKET_ENGINE) += packetengines/
+ obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
+ obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
++obj-$(CONFIG_NET_RALINK) += ralink/
+ obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
+ obj-$(CONFIG_SH_ETH) += renesas/
+ obj-$(CONFIG_NET_VENDOR_RDC) += rdc/
+diff --git a/drivers/net/ethernet/ralink/Kconfig b/drivers/net/ethernet/ralink/Kconfig
+new file mode 100644
+index 0000000..727ed78
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/Kconfig
+@@ -0,0 +1,32 @@
++config NET_RALINK
++ tristate "Ralink RT288X/RT3X5X/RT3662/RT3883/MT7620 ethernet driver"
++ depends on RALINK
++ help
++ This driver supports the ethernet mac inside the ralink wisocs
++
++if NET_RALINK
++
++config NET_RALINK_MDIO
++ def_bool NET_RALINK
++ depends on (SOC_RT288X || SOC_RT3883 || SOC_MT7620)
++ select PHYLIB
++
++config NET_RALINK_MDIO_RT2880
++ def_bool NET_RALINK
++ depends on (SOC_RT288X || SOC_RT3883)
++ select NET_RALINK_MDIO
++
++config NET_RALINK_ESW_RT3052
++ def_bool NET_RALINK
++ depends on SOC_RT305X
++ select PHYLIB
++ select SWCONFIG
++
++config NET_RALINK_GSW_MT7620
++ def_bool NET_RALINK
++ depends on SOC_MT7620
++ select INET_LRO
++ select NET_RALINK_MDIO
++ select PHYLIB
++ select SWCONFIG
++endif
+diff --git a/drivers/net/ethernet/ralink/Makefile b/drivers/net/ethernet/ralink/Makefile
+new file mode 100644
+index 0000000..de64edf
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/Makefile
+@@ -0,0 +1,18 @@
++#
++# Makefile for the Ralink SoCs built-in ethernet macs
++#
++
++ralink-eth-y += ralink_soc_eth.o
++
++ralink-eth-$(CONFIG_NET_RALINK_MDIO) += mdio.o
++ralink-eth-$(CONFIG_NET_RALINK_MDIO_RT2880) += mdio_rt2880.o
++
++ralink-eth-$(CONFIG_NET_RALINK_ESW_RT3052) += esw_rt3052.o
++ralink-eth-$(CONFIG_NET_RALINK_GSW_MT7620) += gsw_mt7620a.o mt7530.o
++
++ralink-eth-$(CONFIG_SOC_RT288X) += soc_rt2880.o
++ralink-eth-$(CONFIG_SOC_RT305X) += soc_rt305x.o
++ralink-eth-$(CONFIG_SOC_RT3883) += soc_rt3883.o
++ralink-eth-$(CONFIG_SOC_MT7620) += soc_mt7620.o
++
++obj-$(CONFIG_NET_RALINK) += ralink-eth.o
+diff --git a/drivers/net/ethernet/ralink/esw_rt3052.c b/drivers/net/ethernet/ralink/esw_rt3052.c
+new file mode 100644
+index 0000000..b937062
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/esw_rt3052.c
+@@ -0,0 +1,1463 @@
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; version 2 of the License
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ * Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/dma-mapping.h>
++#include <linux/init.h>
++#include <linux/skbuff.h>
++#include <linux/etherdevice.h>
++#include <linux/ethtool.h>
++#include <linux/platform_device.h>
++#include <linux/of_device.h>
++#include <linux/clk.h>
++#include <linux/of_net.h>
++#include <linux/of_mdio.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#include "ralink_soc_eth.h"
++
++#include <linux/ioport.h>
++#include <linux/switch.h>
++#include <linux/mii.h>
++
++#include <ralink_regs.h>
++#include <asm/mach-ralink/rt305x.h>
++#include <asm/mach-ralink/rt305x_esw_platform.h>
++
++/*
++ * HW limitations for this switch:
++ * - No large frame support (PKT_MAX_LEN at most 1536)
++ * - Can't have untagged vlan and tagged vlan on one port at the same time,
++ * though this might be possible using the undocumented PPE.
++ */
++
++#define RT305X_ESW_REG_ISR 0x00
++#define RT305X_ESW_REG_IMR 0x04
++#define RT305X_ESW_REG_FCT0 0x08
++#define RT305X_ESW_REG_PFC1 0x14
++#define RT305X_ESW_REG_ATS 0x24
++#define RT305X_ESW_REG_ATS0 0x28
++#define RT305X_ESW_REG_ATS1 0x2c
++#define RT305X_ESW_REG_ATS2 0x30
++#define RT305X_ESW_REG_PVIDC(_n) (0x40 + 4 * (_n))
++#define RT305X_ESW_REG_VLANI(_n) (0x50 + 4 * (_n))
++#define RT305X_ESW_REG_VMSC(_n) (0x70 + 4 * (_n))
++#define RT305X_ESW_REG_POA 0x80
++#define RT305X_ESW_REG_FPA 0x84
++#define RT305X_ESW_REG_SOCPC 0x8c
++#define RT305X_ESW_REG_POC0 0x90
++#define RT305X_ESW_REG_POC1 0x94
++#define RT305X_ESW_REG_POC2 0x98
++#define RT305X_ESW_REG_SGC 0x9c
++#define RT305X_ESW_REG_STRT 0xa0
++#define RT305X_ESW_REG_PCR0 0xc0
++#define RT305X_ESW_REG_PCR1 0xc4
++#define RT305X_ESW_REG_FPA2 0xc8
++#define RT305X_ESW_REG_FCT2 0xcc
++#define RT305X_ESW_REG_SGC2 0xe4
++#define RT305X_ESW_REG_P0LED 0xa4
++#define RT305X_ESW_REG_P1LED 0xa8
++#define RT305X_ESW_REG_P2LED 0xac
++#define RT305X_ESW_REG_P3LED 0xb0
++#define RT305X_ESW_REG_P4LED 0xb4
++#define RT305X_ESW_REG_PXPC(_x) (0xe8 + (4 * _x))
++#define RT305X_ESW_REG_P1PC 0xec
++#define RT305X_ESW_REG_P2PC 0xf0
++#define RT305X_ESW_REG_P3PC 0xf4
++#define RT305X_ESW_REG_P4PC 0xf8
++#define RT305X_ESW_REG_P5PC 0xfc
++
++#define RT305X_ESW_LED_LINK 0
++#define RT305X_ESW_LED_100M 1
++#define RT305X_ESW_LED_DUPLEX 2
++#define RT305X_ESW_LED_ACTIVITY 3
++#define RT305X_ESW_LED_COLLISION 4
++#define RT305X_ESW_LED_LINKACT 5
++#define RT305X_ESW_LED_DUPLCOLL 6
++#define RT305X_ESW_LED_10MACT 7
++#define RT305X_ESW_LED_100MACT 8
++/* Additional led states not in datasheet: */
++#define RT305X_ESW_LED_BLINK 10
++#define RT305X_ESW_LED_ON 12
++
++#define RT305X_ESW_LINK_S 25
++#define RT305X_ESW_DUPLEX_S 9
++#define RT305X_ESW_SPD_S 0
++
++#define RT305X_ESW_PCR0_WT_NWAY_DATA_S 16
++#define RT305X_ESW_PCR0_WT_PHY_CMD BIT(13)
++#define RT305X_ESW_PCR0_CPU_PHY_REG_S 8
++
++#define RT305X_ESW_PCR1_WT_DONE BIT(0)
++
++#define RT305X_ESW_ATS_TIMEOUT (5 * HZ)
++#define RT305X_ESW_PHY_TIMEOUT (5 * HZ)
++
++#define RT305X_ESW_PVIDC_PVID_M 0xfff
++#define RT305X_ESW_PVIDC_PVID_S 12
++
++#define RT305X_ESW_VLANI_VID_M 0xfff
++#define RT305X_ESW_VLANI_VID_S 12
++
++#define RT305X_ESW_VMSC_MSC_M 0xff
++#define RT305X_ESW_VMSC_MSC_S 8
++
++#define RT305X_ESW_SOCPC_DISUN2CPU_S 0
++#define RT305X_ESW_SOCPC_DISMC2CPU_S 8
++#define RT305X_ESW_SOCPC_DISBC2CPU_S 16
++#define RT305X_ESW_SOCPC_CRC_PADDING BIT(25)
++
++#define RT305X_ESW_POC0_EN_BP_S 0
++#define RT305X_ESW_POC0_EN_FC_S 8
++#define RT305X_ESW_POC0_DIS_RMC2CPU_S 16
++#define RT305X_ESW_POC0_DIS_PORT_M 0x7f
++#define RT305X_ESW_POC0_DIS_PORT_S 23
++
++#define RT305X_ESW_POC2_UNTAG_EN_M 0xff
++#define RT305X_ESW_POC2_UNTAG_EN_S 0
++#define RT305X_ESW_POC2_ENAGING_S 8
++#define RT305X_ESW_POC2_DIS_UC_PAUSE_S 16
++
++#define RT305X_ESW_SGC2_DOUBLE_TAG_M 0x7f
++#define RT305X_ESW_SGC2_DOUBLE_TAG_S 0
++#define RT305X_ESW_SGC2_LAN_PMAP_M 0x3f
++#define RT305X_ESW_SGC2_LAN_PMAP_S 24
++
++#define RT305X_ESW_PFC1_EN_VLAN_M 0xff
++#define RT305X_ESW_PFC1_EN_VLAN_S 16
++#define RT305X_ESW_PFC1_EN_TOS_S 24
++
++#define RT305X_ESW_VLAN_NONE 0xfff
++
++#define RT305X_ESW_GSC_BC_STROM_MASK 0x3
++#define RT305X_ESW_GSC_BC_STROM_SHIFT 4
++
++#define RT305X_ESW_GSC_LED_FREQ_MASK 0x3
++#define RT305X_ESW_GSC_LED_FREQ_SHIFT 23
++
++#define RT305X_ESW_POA_LINK_MASK 0x1f
++#define RT305X_ESW_POA_LINK_SHIFT 25
++
++#define RT305X_ESW_PORT_ST_CHG BIT(26)
++#define RT305X_ESW_PORT0 0
++#define RT305X_ESW_PORT1 1
++#define RT305X_ESW_PORT2 2
++#define RT305X_ESW_PORT3 3
++#define RT305X_ESW_PORT4 4
++#define RT305X_ESW_PORT5 5
++#define RT305X_ESW_PORT6 6
++
++#define RT305X_ESW_PORTS_NONE 0
++
++#define RT305X_ESW_PMAP_LLLLLL 0x3f
++#define RT305X_ESW_PMAP_LLLLWL 0x2f
++#define RT305X_ESW_PMAP_WLLLLL 0x3e
++
++#define RT305X_ESW_PORTS_INTERNAL \
++ (BIT(RT305X_ESW_PORT0) | BIT(RT305X_ESW_PORT1) | \
++ BIT(RT305X_ESW_PORT2) | BIT(RT305X_ESW_PORT3) | \
++ BIT(RT305X_ESW_PORT4))
++
++#define RT305X_ESW_PORTS_NOCPU \
++ (RT305X_ESW_PORTS_INTERNAL | BIT(RT305X_ESW_PORT5))
++
++#define RT305X_ESW_PORTS_CPU BIT(RT305X_ESW_PORT6)
++
++#define RT305X_ESW_PORTS_ALL \
++ (RT305X_ESW_PORTS_NOCPU | RT305X_ESW_PORTS_CPU)
++
++#define RT305X_ESW_NUM_VLANS 16
++#define RT305X_ESW_NUM_VIDS 4096
++#define RT305X_ESW_NUM_PORTS 7
++#define RT305X_ESW_NUM_LANWAN 6
++#define RT305X_ESW_NUM_LEDS 5
++
++#define RT5350_ESW_REG_PXTPC(_x) (0x150 + (4 * _x))
++#define RT5350_EWS_REG_LED_POLARITY 0x168
++#define RT5350_RESET_EPHY BIT(24)
++#define SYSC_REG_RESET_CTRL 0x34
++
++enum {
++ /* Global attributes. */
++ RT305X_ESW_ATTR_ENABLE_VLAN,
++ RT305X_ESW_ATTR_ALT_VLAN_DISABLE,
++ RT305X_ESW_ATTR_BC_STATUS,
++ RT305X_ESW_ATTR_LED_FREQ,
++ /* Port attributes. */
++ RT305X_ESW_ATTR_PORT_DISABLE,
++ RT305X_ESW_ATTR_PORT_DOUBLETAG,
++ RT305X_ESW_ATTR_PORT_UNTAG,
++ RT305X_ESW_ATTR_PORT_LED,
++ RT305X_ESW_ATTR_PORT_LAN,
++ RT305X_ESW_ATTR_PORT_RECV_BAD,
++ RT305X_ESW_ATTR_PORT_RECV_GOOD,
++ RT5350_ESW_ATTR_PORT_TR_BAD,
++ RT5350_ESW_ATTR_PORT_TR_GOOD,
++};
++
++struct esw_port {
++ bool disable;
++ bool doubletag;
++ bool untag;
++ u8 led;
++ u16 pvid;
++};
++
++struct esw_vlan {
++ u8 ports;
++ u16 vid;
++};
++
++struct rt305x_esw {
++ struct device *dev;
++ void __iomem *base;
++ int irq;
++ const struct rt305x_esw_platform_data *pdata;
++ /* Protects against concurrent register rmw operations. */
++ spinlock_t reg_rw_lock;
++
++ unsigned char port_map;
++ unsigned int reg_initval_fct2;
++ unsigned int reg_initval_fpa2;
++ unsigned int reg_led_polarity;
++
++
++ struct switch_dev swdev;
++ bool global_vlan_enable;
++ bool alt_vlan_disable;
++ int bc_storm_protect;
++ int led_frequency;
++ struct esw_vlan vlans[RT305X_ESW_NUM_VLANS];
++ struct esw_port ports[RT305X_ESW_NUM_PORTS];
++
++};
++
++static inline void esw_w32(struct rt305x_esw *esw, u32 val, unsigned reg)
++{
++ __raw_writel(val, esw->base + reg);
++}
++
++static inline u32 esw_r32(struct rt305x_esw *esw, unsigned reg)
++{
++ return __raw_readl(esw->base + reg);
++}
++
++static inline void esw_rmw_raw(struct rt305x_esw *esw, unsigned reg, unsigned long mask,
++ unsigned long val)
++{
++ unsigned long t;
++
++ t = __raw_readl(esw->base + reg) & ~mask;
++ __raw_writel(t | val, esw->base + reg);
++}
++
++static void esw_rmw(struct rt305x_esw *esw, unsigned reg, unsigned long mask,
++ unsigned long val)
++{
++ unsigned long flags;
++
++ spin_lock_irqsave(&esw->reg_rw_lock, flags);
++ esw_rmw_raw(esw, reg, mask, val);
++ spin_unlock_irqrestore(&esw->reg_rw_lock, flags);
++}
++
++static u32 rt305x_mii_write(struct rt305x_esw *esw, u32 phy_addr, u32 phy_register,
++ u32 write_data)
++{
++ unsigned long t_start = jiffies;
++ int ret = 0;
++
++ while (1) {
++ if (!(esw_r32(esw, RT305X_ESW_REG_PCR1) &
++ RT305X_ESW_PCR1_WT_DONE))
++ break;
++ if (time_after(jiffies, t_start + RT305X_ESW_PHY_TIMEOUT)) {
++ ret = 1;
++ goto out;
++ }
++ }
++
++ write_data &= 0xffff;
++ esw_w32(esw,
++ (write_data << RT305X_ESW_PCR0_WT_NWAY_DATA_S) |
++ (phy_register << RT305X_ESW_PCR0_CPU_PHY_REG_S) |
++ (phy_addr) | RT305X_ESW_PCR0_WT_PHY_CMD,
++ RT305X_ESW_REG_PCR0);
++
++ t_start = jiffies;
++ while (1) {
++ if (esw_r32(esw, RT305X_ESW_REG_PCR1) &
++ RT305X_ESW_PCR1_WT_DONE)
++ break;
++
++ if (time_after(jiffies, t_start + RT305X_ESW_PHY_TIMEOUT)) {
++ ret = 1;
++ break;
++ }
++ }
++out:
++ if (ret)
++ printk(KERN_ERR "ramips_eth: MDIO timeout\n");
++ return ret;
++}
++
++static unsigned esw_get_vlan_id(struct rt305x_esw *esw, unsigned vlan)
++{
++ unsigned s;
++ unsigned val;
++
++ s = RT305X_ESW_VLANI_VID_S * (vlan % 2);
++ val = esw_r32(esw, RT305X_ESW_REG_VLANI(vlan / 2));
++ val = (val >> s) & RT305X_ESW_VLANI_VID_M;
++
++ return val;
++}
++
++static void esw_set_vlan_id(struct rt305x_esw *esw, unsigned vlan, unsigned vid)
++{
++ unsigned s;
++
++ s = RT305X_ESW_VLANI_VID_S * (vlan % 2);
++ esw_rmw(esw,
++ RT305X_ESW_REG_VLANI(vlan / 2),
++ RT305X_ESW_VLANI_VID_M << s,
++ (vid & RT305X_ESW_VLANI_VID_M) << s);
++}
++
++static unsigned esw_get_pvid(struct rt305x_esw *esw, unsigned port)
++{
++ unsigned s, val;
++
++ s = RT305X_ESW_PVIDC_PVID_S * (port % 2);
++ val = esw_r32(esw, RT305X_ESW_REG_PVIDC(port / 2));
++ return (val >> s) & RT305X_ESW_PVIDC_PVID_M;
++}
++
++static void esw_set_pvid(struct rt305x_esw *esw, unsigned port, unsigned pvid)
++{
++ unsigned s;
++
++ s = RT305X_ESW_PVIDC_PVID_S * (port % 2);
++ esw_rmw(esw,
++ RT305X_ESW_REG_PVIDC(port / 2),
++ RT305X_ESW_PVIDC_PVID_M << s,
++ (pvid & RT305X_ESW_PVIDC_PVID_M) << s);
++}
++
++static unsigned esw_get_vmsc(struct rt305x_esw *esw, unsigned vlan)
++{
++ unsigned s, val;
++
++ s = RT305X_ESW_VMSC_MSC_S * (vlan % 4);
++ val = esw_r32(esw, RT305X_ESW_REG_VMSC(vlan / 4));
++ val = (val >> s) & RT305X_ESW_VMSC_MSC_M;
++
++ return val;
++}
++
++static void esw_set_vmsc(struct rt305x_esw *esw, unsigned vlan, unsigned msc)
++{
++ unsigned s;
++
++ s = RT305X_ESW_VMSC_MSC_S * (vlan % 4);
++ esw_rmw(esw,
++ RT305X_ESW_REG_VMSC(vlan / 4),
++ RT305X_ESW_VMSC_MSC_M << s,
++ (msc & RT305X_ESW_VMSC_MSC_M) << s);
++}
++
++static unsigned esw_get_port_disable(struct rt305x_esw *esw)
++{
++ unsigned reg;
++ reg = esw_r32(esw, RT305X_ESW_REG_POC0);
++ return (reg >> RT305X_ESW_POC0_DIS_PORT_S) &
++ RT305X_ESW_POC0_DIS_PORT_M;
++}
++
++static void esw_set_port_disable(struct rt305x_esw *esw, unsigned disable_mask)
++{
++ unsigned old_mask;
++ unsigned enable_mask;
++ unsigned changed;
++ int i;
++
++ old_mask = esw_get_port_disable(esw);
++ changed = old_mask ^ disable_mask;
++ enable_mask = old_mask & disable_mask;
++
++ /* enable before writing to MII */
++ esw_rmw(esw, RT305X_ESW_REG_POC0,
++ (RT305X_ESW_POC0_DIS_PORT_M <<
++ RT305X_ESW_POC0_DIS_PORT_S),
++ enable_mask << RT305X_ESW_POC0_DIS_PORT_S);
++
++ for (i = 0; i < RT305X_ESW_NUM_LEDS; i++) {
++ if (!(changed & (1 << i)))
++ continue;
++ if (disable_mask & (1 << i)) {
++ /* disable */
++ rt305x_mii_write(esw, i, MII_BMCR,
++ BMCR_PDOWN);
++ } else {
++ /* enable */
++ rt305x_mii_write(esw, i, MII_BMCR,
++ BMCR_FULLDPLX |
++ BMCR_ANENABLE |
++ BMCR_ANRESTART |
++ BMCR_SPEED100);
++ }
++ }
++
++ /* disable after writing to MII */
++ esw_rmw(esw, RT305X_ESW_REG_POC0,
++ (RT305X_ESW_POC0_DIS_PORT_M <<
++ RT305X_ESW_POC0_DIS_PORT_S),
++ disable_mask << RT305X_ESW_POC0_DIS_PORT_S);
++}
++
++static void esw_set_gsc(struct rt305x_esw *esw)
++{
++ esw_rmw(esw, RT305X_ESW_REG_SGC,
++ RT305X_ESW_GSC_BC_STROM_MASK << RT305X_ESW_GSC_BC_STROM_SHIFT,
++ esw->bc_storm_protect << RT305X_ESW_GSC_BC_STROM_SHIFT);
++ esw_rmw(esw, RT305X_ESW_REG_SGC,
++ RT305X_ESW_GSC_LED_FREQ_MASK << RT305X_ESW_GSC_LED_FREQ_SHIFT,
++ esw->led_frequency << RT305X_ESW_GSC_LED_FREQ_SHIFT);
++}
++
++static int esw_apply_config(struct switch_dev *dev);
++
++static void esw_hw_init(struct rt305x_esw *esw)
++{
++ int i;
++ u8 port_disable = 0;
++ u8 port_map = RT305X_ESW_PMAP_LLLLLL;
++
++ /* vodoo from original driver */
++ esw_w32(esw, 0xC8A07850, RT305X_ESW_REG_FCT0);
++ esw_w32(esw, 0x00000000, RT305X_ESW_REG_SGC2);
++ /* Port priority 1 for all ports, vlan enabled. */
++ esw_w32(esw, 0x00005555 |
++ (RT305X_ESW_PORTS_ALL << RT305X_ESW_PFC1_EN_VLAN_S),
++ RT305X_ESW_REG_PFC1);
++
++ /* Enable Back Pressure, and Flow Control */
++ esw_w32(esw,
++ ((RT305X_ESW_PORTS_ALL << RT305X_ESW_POC0_EN_BP_S) |
++ (RT305X_ESW_PORTS_ALL << RT305X_ESW_POC0_EN_FC_S)),
++ RT305X_ESW_REG_POC0);
++
++ /* Enable Aging, and VLAN TAG removal */
++ esw_w32(esw,
++ ((RT305X_ESW_PORTS_ALL << RT305X_ESW_POC2_ENAGING_S) |
++ (RT305X_ESW_PORTS_NOCPU << RT305X_ESW_POC2_UNTAG_EN_S)),
++ RT305X_ESW_REG_POC2);
++
++ if (esw->reg_initval_fct2)
++ esw_w32(esw, esw->reg_initval_fct2, RT305X_ESW_REG_FCT2);
++ else
++ esw_w32(esw, esw->pdata->reg_initval_fct2, RT305X_ESW_REG_FCT2);
++
++ /*
++ * 300s aging timer, max packet len 1536, broadcast storm prevention
++ * disabled, disable collision abort, mac xor48 hash, 10 packet back
++ * pressure jam, GMII disable was_transmit, back pressure disabled,
++ * 30ms led flash, unmatched IGMP as broadcast, rmc tb fault to all
++ * ports.
++ */
++ esw_w32(esw, 0x0008a301, RT305X_ESW_REG_SGC);
++
++ /* Setup SoC Port control register */
++ esw_w32(esw,
++ (RT305X_ESW_SOCPC_CRC_PADDING |
++ (RT305X_ESW_PORTS_CPU << RT305X_ESW_SOCPC_DISUN2CPU_S) |
++ (RT305X_ESW_PORTS_CPU << RT305X_ESW_SOCPC_DISMC2CPU_S) |
++ (RT305X_ESW_PORTS_CPU << RT305X_ESW_SOCPC_DISBC2CPU_S)),
++ RT305X_ESW_REG_SOCPC);
++
++ if (esw->reg_initval_fpa2)
++ esw_w32(esw, esw->reg_initval_fpa2, RT305X_ESW_REG_FPA2);
++ else
++ esw_w32(esw, esw->pdata->reg_initval_fpa2, RT305X_ESW_REG_FPA2);
++ esw_w32(esw, 0x00000000, RT305X_ESW_REG_FPA);
++
++ /* Force Link/Activity on ports */
++ esw_w32(esw, 0x00000005, RT305X_ESW_REG_P0LED);
++ esw_w32(esw, 0x00000005, RT305X_ESW_REG_P1LED);
++ esw_w32(esw, 0x00000005, RT305X_ESW_REG_P2LED);
++ esw_w32(esw, 0x00000005, RT305X_ESW_REG_P3LED);
++ esw_w32(esw, 0x00000005, RT305X_ESW_REG_P4LED);
++
++ /* Copy disabled port configuration from bootloader setup */
++ port_disable = esw_get_port_disable(esw);
++ for (i = 0; i < 6; i++)
++ esw->ports[i].disable = (port_disable & (1 << i)) != 0;
++
++ if (soc_is_rt3352()) {
++ /* reset EPHY */
++ u32 val = rt_sysc_r32(SYSC_REG_RESET_CTRL);
++ rt_sysc_w32(val | RT5350_RESET_EPHY, SYSC_REG_RESET_CTRL);
++ rt_sysc_w32(val, SYSC_REG_RESET_CTRL);
++
++ rt305x_mii_write(esw, 0, 31, 0x8000);
++ for (i = 0; i < 5; i++) {
++ if (esw->ports[i].disable) {
++ rt305x_mii_write(esw, i, MII_BMCR, BMCR_PDOWN);
++ } else {
++ rt305x_mii_write(esw, i, MII_BMCR,
++ BMCR_FULLDPLX |
++ BMCR_ANENABLE |
++ BMCR_SPEED100);
++ }
++ /* TX10 waveform coefficient LSB=0 disable PHY */
++ rt305x_mii_write(esw, i, 26, 0x1601);
++ /* TX100/TX10 AD/DA current bias */
++ rt305x_mii_write(esw, i, 29, 0x7016);
++ /* TX100 slew rate control */
++ rt305x_mii_write(esw, i, 30, 0x0038);
++ }
++
++ /* select global register */
++ rt305x_mii_write(esw, 0, 31, 0x0);
++ /* enlarge agcsel threshold 3 and threshold 2 */
++ rt305x_mii_write(esw, 0, 1, 0x4a40);
++ /* enlarge agcsel threshold 5 and threshold 4 */
++ rt305x_mii_write(esw, 0, 2, 0x6254);
++ /* enlarge agcsel threshold */
++ rt305x_mii_write(esw, 0, 3, 0xa17f);
++ rt305x_mii_write(esw, 0,12, 0x7eaa);
++ /* longer TP_IDL tail length */
++ rt305x_mii_write(esw, 0, 14, 0x65);
++ /* increased squelch pulse count threshold. */
++ rt305x_mii_write(esw, 0, 16, 0x0684);
++ /* set TX10 signal amplitude threshold to minimum */
++ rt305x_mii_write(esw, 0, 17, 0x0fe0);
++ /* set squelch amplitude to higher threshold */
++ rt305x_mii_write(esw, 0, 18, 0x40ba);
++ /* tune TP_IDL tail and head waveform, enable power down slew rate control */
++ rt305x_mii_write(esw, 0, 22, 0x253f);
++ /* set PLL/Receive bias current are calibrated */
++ rt305x_mii_write(esw, 0, 27, 0x2fda);
++ /* change PLL/Receive bias current to internal(RT3350) */
++ rt305x_mii_write(esw, 0, 28, 0xc410);
++ /* change PLL bias current to internal(RT3052_MP3) */
++ rt305x_mii_write(esw, 0, 29, 0x598b);
++ /* select local register */
++ rt305x_mii_write(esw, 0, 31, 0x8000);
++ } else if (soc_is_rt5350()) {
++ /* reset EPHY */
++ u32 val = rt_sysc_r32(SYSC_REG_RESET_CTRL);
++ rt_sysc_w32(val | RT5350_RESET_EPHY, SYSC_REG_RESET_CTRL);
++ rt_sysc_w32(val, SYSC_REG_RESET_CTRL);
++
++ /* set the led polarity */
++ esw_w32(esw, esw->reg_led_polarity & 0x1F, RT5350_EWS_REG_LED_POLARITY);
++
++ /* local registers */
++ rt305x_mii_write(esw, 0, 31, 0x8000);
++ for (i = 0; i < 5; i++) {
++ if (esw->ports[i].disable) {
++ rt305x_mii_write(esw, i, MII_BMCR, BMCR_PDOWN);
++ } else {
++ rt305x_mii_write(esw, i, MII_BMCR,
++ BMCR_FULLDPLX |
++ BMCR_ANENABLE |
++ BMCR_SPEED100);
++ }
++ /* TX10 waveform coefficient LSB=0 disable PHY */
++ rt305x_mii_write(esw, i, 26, 0x1601);
++ /* TX100/TX10 AD/DA current bias */
++ rt305x_mii_write(esw, i, 29, 0x7015);
++ /* TX100 slew rate control */
++ rt305x_mii_write(esw, i, 30, 0x0038);
++ }
++
++ /* global registers */
++ rt305x_mii_write(esw, 0, 31, 0x0);
++ /* enlarge agcsel threshold 3 and threshold 2 */
++ rt305x_mii_write(esw, 0, 1, 0x4a40);
++ /* enlarge agcsel threshold 5 and threshold 4 */
++ rt305x_mii_write(esw, 0, 2, 0x6254);
++ /* enlarge agcsel threshold 6 */
++ rt305x_mii_write(esw, 0, 3, 0xa17f);
++ rt305x_mii_write(esw, 0, 12, 0x7eaa);
++ /* longer TP_IDL tail length */
++ rt305x_mii_write(esw, 0, 14, 0x65);
++ /* increased squelch pulse count threshold. */
++ rt305x_mii_write(esw, 0, 16, 0x0684);
++ /* set TX10 signal amplitude threshold to minimum */
++ rt305x_mii_write(esw, 0, 17, 0x0fe0);
++ /* set squelch amplitude to higher threshold */
++ rt305x_mii_write(esw, 0, 18, 0x40ba);
++ /* tune TP_IDL tail and head waveform, enable power down slew rate control */
++ rt305x_mii_write(esw, 0, 22, 0x253f);
++ /* set PLL/Receive bias current are calibrated */
++ rt305x_mii_write(esw, 0, 27, 0x2fda);
++ /* change PLL/Receive bias current to internal(RT3350) */
++ rt305x_mii_write(esw, 0, 28, 0xc410);
++ /* change PLL bias current to internal(RT3052_MP3) */
++ rt305x_mii_write(esw, 0, 29, 0x598b);
++ /* select local register */
++ rt305x_mii_write(esw, 0, 31, 0x8000);
++ } else {
++ rt305x_mii_write(esw, 0, 31, 0x8000);
++ for (i = 0; i < 5; i++) {
++ if (esw->ports[i].disable) {
++ rt305x_mii_write(esw, i, MII_BMCR, BMCR_PDOWN);
++ } else {
++ rt305x_mii_write(esw, i, MII_BMCR,
++ BMCR_FULLDPLX |
++ BMCR_ANENABLE |
++ BMCR_SPEED100);
++ }
++ /* TX10 waveform coefficient */
++ rt305x_mii_write(esw, i, 26, 0x1601);
++ /* TX100/TX10 AD/DA current bias */
++ rt305x_mii_write(esw, i, 29, 0x7058);
++ /* TX100 slew rate control */
++ rt305x_mii_write(esw, i, 30, 0x0018);
++ }
++
++ /* PHY IOT */
++ /* select global register */
++ rt305x_mii_write(esw, 0, 31, 0x0);
++ /* tune TP_IDL tail and head waveform */
++ rt305x_mii_write(esw, 0, 22, 0x052f);
++ /* set TX10 signal amplitude threshold to minimum */
++ rt305x_mii_write(esw, 0, 17, 0x0fe0);
++ /* set squelch amplitude to higher threshold */
++ rt305x_mii_write(esw, 0, 18, 0x40ba);
++ /* longer TP_IDL tail length */
++ rt305x_mii_write(esw, 0, 14, 0x65);
++ /* select local register */
++ rt305x_mii_write(esw, 0, 31, 0x8000);
++ }
++
++ if (esw->port_map)
++ port_map = esw->port_map;
++ else
++ port_map = RT305X_ESW_PMAP_LLLLLL;
++
++ /*
++ * Unused HW feature, but still nice to be consistent here...
++ * This is also exported to userspace ('lan' attribute) so it's
++ * conveniently usable to decide which ports go into the wan vlan by
++ * default.
++ */
++ esw_rmw(esw, RT305X_ESW_REG_SGC2,
++ RT305X_ESW_SGC2_LAN_PMAP_M << RT305X_ESW_SGC2_LAN_PMAP_S,
++ port_map << RT305X_ESW_SGC2_LAN_PMAP_S);
++
++ /* make the switch leds blink */
++ for (i = 0; i < RT305X_ESW_NUM_LEDS; i++)
++ esw->ports[i].led = 0x05;
++
++ /* Apply the empty config. */
++ esw_apply_config(&esw->swdev);
++
++ /* Only unmask the port change interrupt */
++ esw_w32(esw, ~RT305X_ESW_PORT_ST_CHG, RT305X_ESW_REG_IMR);
++}
++
++static irqreturn_t esw_interrupt(int irq, void *_esw)
++{
++ struct rt305x_esw *esw = (struct rt305x_esw *) _esw;
++ u32 status;
++
++ status = esw_r32(esw, RT305X_ESW_REG_ISR);
++ if (status & RT305X_ESW_PORT_ST_CHG) {
++ u32 link = esw_r32(esw, RT305X_ESW_REG_POA);
++ link >>= RT305X_ESW_POA_LINK_SHIFT;
++ link &= RT305X_ESW_POA_LINK_MASK;
++ dev_info(esw->dev, "link changed 0x%02X\n", link);
++ }
++ esw_w32(esw, status, RT305X_ESW_REG_ISR);
++
++ return IRQ_HANDLED;
++}
++
++static int esw_apply_config(struct switch_dev *dev)
++{
++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++ int i;
++ u8 disable = 0;
++ u8 doubletag = 0;
++ u8 en_vlan = 0;
++ u8 untag = 0;
++
++ for (i = 0; i < RT305X_ESW_NUM_VLANS; i++) {
++ u32 vid, vmsc;
++ if (esw->global_vlan_enable) {
++ vid = esw->vlans[i].vid;
++ vmsc = esw->vlans[i].ports;
++ } else {
++ vid = RT305X_ESW_VLAN_NONE;
++ vmsc = RT305X_ESW_PORTS_NONE;
++ }
++ esw_set_vlan_id(esw, i, vid);
++ esw_set_vmsc(esw, i, vmsc);
++ }
++
++ for (i = 0; i < RT305X_ESW_NUM_PORTS; i++) {
++ u32 pvid;
++ disable |= esw->ports[i].disable << i;
++ if (esw->global_vlan_enable) {
++ doubletag |= esw->ports[i].doubletag << i;
++ en_vlan |= 1 << i;
++ untag |= esw->ports[i].untag << i;
++ pvid = esw->ports[i].pvid;
++ } else {
++ int x = esw->alt_vlan_disable ? 0 : 1;
++ doubletag |= x << i;
++ en_vlan |= x << i;
++ untag |= x << i;
++ pvid = 0;
++ }
++ esw_set_pvid(esw, i, pvid);
++ if (i < RT305X_ESW_NUM_LEDS)
++ esw_w32(esw, esw->ports[i].led,
++ RT305X_ESW_REG_P0LED + 4*i);
++ }
++
++ esw_set_gsc(esw);
++ esw_set_port_disable(esw, disable);
++ esw_rmw(esw, RT305X_ESW_REG_SGC2,
++ (RT305X_ESW_SGC2_DOUBLE_TAG_M <<
++ RT305X_ESW_SGC2_DOUBLE_TAG_S),
++ doubletag << RT305X_ESW_SGC2_DOUBLE_TAG_S);
++ esw_rmw(esw, RT305X_ESW_REG_PFC1,
++ RT305X_ESW_PFC1_EN_VLAN_M << RT305X_ESW_PFC1_EN_VLAN_S,
++ en_vlan << RT305X_ESW_PFC1_EN_VLAN_S);
++ esw_rmw(esw, RT305X_ESW_REG_POC2,
++ RT305X_ESW_POC2_UNTAG_EN_M << RT305X_ESW_POC2_UNTAG_EN_S,
++ untag << RT305X_ESW_POC2_UNTAG_EN_S);
++
++ if (!esw->global_vlan_enable) {
++ /*
++ * Still need to put all ports into vlan 0 or they'll be
++ * isolated.
++ * NOTE: vlan 0 is special, no vlan tag is prepended
++ */
++ esw_set_vlan_id(esw, 0, 0);
++ esw_set_vmsc(esw, 0, RT305X_ESW_PORTS_ALL);
++ }
++
++ return 0;
++}
++
++static int esw_reset_switch(struct switch_dev *dev)
++{
++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++ esw->global_vlan_enable = 0;
++ memset(esw->ports, 0, sizeof(esw->ports));
++ memset(esw->vlans, 0, sizeof(esw->vlans));
++ esw_hw_init(esw);
++
++ return 0;
++}
++
++static int esw_get_vlan_enable(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++ val->value.i = esw->global_vlan_enable;
++
++ return 0;
++}
++
++static int esw_set_vlan_enable(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++ esw->global_vlan_enable = val->value.i != 0;
++
++ return 0;
++}
++
++static int esw_get_alt_vlan_disable(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++ val->value.i = esw->alt_vlan_disable;
++
++ return 0;
++}
++
++static int esw_set_alt_vlan_disable(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++ esw->alt_vlan_disable = val->value.i != 0;
++
++ return 0;
++}
++
++static int
++rt305x_esw_set_bc_status(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++ esw->bc_storm_protect = val->value.i & RT305X_ESW_GSC_BC_STROM_MASK;
++
++ return 0;
++}
++
++static int
++rt305x_esw_get_bc_status(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++ val->value.i = esw->bc_storm_protect;
++
++ return 0;
++}
++
++static int
++rt305x_esw_set_led_freq(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++ esw->led_frequency = val->value.i & RT305X_ESW_GSC_LED_FREQ_MASK;
++
++ return 0;
++}
++
++static int
++rt305x_esw_get_led_freq(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++ val->value.i = esw->led_frequency;
++
++ return 0;
++}
++
++static int esw_get_port_link(struct switch_dev *dev,
++ int port,
++ struct switch_port_link *link)
++{
++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++ u32 speed, poa;
++
++ if (port < 0 || port >= RT305X_ESW_NUM_PORTS)
++ return -EINVAL;
++
++ poa = esw_r32(esw, RT305X_ESW_REG_POA) >> port;
++
++ link->link = (poa >> RT305X_ESW_LINK_S) & 1;
++ link->duplex = (poa >> RT305X_ESW_DUPLEX_S) & 1;
++ if (port < RT305X_ESW_NUM_LEDS) {
++ speed = (poa >> RT305X_ESW_SPD_S) & 1;
++ } else {
++ if (port == RT305X_ESW_NUM_PORTS - 1)
++ poa >>= 1;
++ speed = (poa >> RT305X_ESW_SPD_S) & 3;
++ }
++ switch (speed) {
++ case 0:
++ link->speed = SWITCH_PORT_SPEED_10;
++ break;
++ case 1:
++ link->speed = SWITCH_PORT_SPEED_100;
++ break;
++ case 2:
++ case 3: /* forced gige speed can be 2 or 3 */
++ link->speed = SWITCH_PORT_SPEED_1000;
++ break;
++ default:
++ link->speed = SWITCH_PORT_SPEED_UNKNOWN;
++ break;
++ }
++
++ return 0;
++}
++
++static int esw_get_port_bool(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++ int idx = val->port_vlan;
++ u32 x, reg, shift;
++
++ if (idx < 0 || idx >= RT305X_ESW_NUM_PORTS)
++ return -EINVAL;
++
++ switch (attr->id) {
++ case RT305X_ESW_ATTR_PORT_DISABLE:
++ reg = RT305X_ESW_REG_POC0;
++ shift = RT305X_ESW_POC0_DIS_PORT_S;
++ break;
++ case RT305X_ESW_ATTR_PORT_DOUBLETAG:
++ reg = RT305X_ESW_REG_SGC2;
++ shift = RT305X_ESW_SGC2_DOUBLE_TAG_S;
++ break;
++ case RT305X_ESW_ATTR_PORT_UNTAG:
++ reg = RT305X_ESW_REG_POC2;
++ shift = RT305X_ESW_POC2_UNTAG_EN_S;
++ break;
++ case RT305X_ESW_ATTR_PORT_LAN:
++ reg = RT305X_ESW_REG_SGC2;
++ shift = RT305X_ESW_SGC2_LAN_PMAP_S;
++ if (idx >= RT305X_ESW_NUM_LANWAN)
++ return -EINVAL;
++ break;
++ default:
++ return -EINVAL;
++ }
++
++ x = esw_r32(esw, reg);
++ val->value.i = (x >> (idx + shift)) & 1;
++
++ return 0;
++}
++
++static int esw_set_port_bool(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++ int idx = val->port_vlan;
++
++ if (idx < 0 || idx >= RT305X_ESW_NUM_PORTS ||
++ val->value.i < 0 || val->value.i > 1)
++ return -EINVAL;
++
++ switch (attr->id) {
++ case RT305X_ESW_ATTR_PORT_DISABLE:
++ esw->ports[idx].disable = val->value.i;
++ break;
++ case RT305X_ESW_ATTR_PORT_DOUBLETAG:
++ esw->ports[idx].doubletag = val->value.i;
++ break;
++ case RT305X_ESW_ATTR_PORT_UNTAG:
++ esw->ports[idx].untag = val->value.i;
++ break;
++ default:
++ return -EINVAL;
++ }
++
++ return 0;
++}
++
++static int esw_get_port_recv_badgood(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++ int idx = val->port_vlan;
++ int shift = attr->id == RT305X_ESW_ATTR_PORT_RECV_GOOD ? 0 : 16;
++ u32 reg;
++
++ if (idx < 0 || idx >= RT305X_ESW_NUM_LANWAN)
++ return -EINVAL;
++ reg = esw_r32(esw, RT305X_ESW_REG_PXPC(idx));
++ val->value.i = (reg >> shift) & 0xffff;
++
++ return 0;
++}
++
++static int
++esw_get_port_tr_badgood(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++ int idx = val->port_vlan;
++ int shift = attr->id == RT5350_ESW_ATTR_PORT_TR_GOOD ? 0 : 16;
++ u32 reg;
++
++ if (!soc_is_rt5350())
++ return -EINVAL;
++
++ if (idx < 0 || idx >= RT305X_ESW_NUM_LANWAN)
++ return -EINVAL;
++
++ reg = esw_r32(esw, RT5350_ESW_REG_PXTPC(idx));
++ val->value.i = (reg >> shift) & 0xffff;
++
++ return 0;
++}
++
++static int esw_get_port_led(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++ int idx = val->port_vlan;
++
++ if (idx < 0 || idx >= RT305X_ESW_NUM_PORTS ||
++ idx >= RT305X_ESW_NUM_LEDS)
++ return -EINVAL;
++
++ val->value.i = esw_r32(esw, RT305X_ESW_REG_P0LED + 4*idx);
++
++ return 0;
++}
++
++static int esw_set_port_led(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++ int idx = val->port_vlan;
++
++ if (idx < 0 || idx >= RT305X_ESW_NUM_LEDS)
++ return -EINVAL;
++
++ esw->ports[idx].led = val->value.i;
++
++ return 0;
++}
++
++static int esw_get_port_pvid(struct switch_dev *dev, int port, int *val)
++{
++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++ if (port >= RT305X_ESW_NUM_PORTS)
++ return -EINVAL;
++
++ *val = esw_get_pvid(esw, port);
++
++ return 0;
++}
++
++static int esw_set_port_pvid(struct switch_dev *dev, int port, int val)
++{
++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++
++ if (port >= RT305X_ESW_NUM_PORTS)
++ return -EINVAL;
++
++ esw->ports[port].pvid = val;
++
++ return 0;
++}
++
++static int esw_get_vlan_ports(struct switch_dev *dev, struct switch_val *val)
++{
++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++ u32 vmsc, poc2;
++ int vlan_idx = -1;
++ int i;
++
++ val->len = 0;
++
++ if (val->port_vlan < 0 || val->port_vlan >= RT305X_ESW_NUM_VIDS)
++ return -EINVAL;
++
++ /* valid vlan? */
++ for (i = 0; i < RT305X_ESW_NUM_VLANS; i++) {
++ if (esw_get_vlan_id(esw, i) == val->port_vlan &&
++ esw_get_vmsc(esw, i) != RT305X_ESW_PORTS_NONE) {
++ vlan_idx = i;
++ break;
++ }
++ }
++
++ if (vlan_idx == -1)
++ return -EINVAL;
++
++ vmsc = esw_get_vmsc(esw, vlan_idx);
++ poc2 = esw_r32(esw, RT305X_ESW_REG_POC2);
++
++ for (i = 0; i < RT305X_ESW_NUM_PORTS; i++) {
++ struct switch_port *p;
++ int port_mask = 1 << i;
++
++ if (!(vmsc & port_mask))
++ continue;
++
++ p = &val->value.ports[val->len++];
++ p->id = i;
++ if (poc2 & (port_mask << RT305X_ESW_POC2_UNTAG_EN_S))
++ p->flags = 0;
++ else
++ p->flags = 1 << SWITCH_PORT_FLAG_TAGGED;
++ }
++
++ return 0;
++}
++
++static int esw_set_vlan_ports(struct switch_dev *dev, struct switch_val *val)
++{
++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
++ int ports;
++ int vlan_idx = -1;
++ int i;
++
++ if (val->port_vlan < 0 || val->port_vlan >= RT305X_ESW_NUM_VIDS ||
++ val->len > RT305X_ESW_NUM_PORTS)
++ return -EINVAL;
++
++ /* one of the already defined vlans? */
++ for (i = 0; i < RT305X_ESW_NUM_VLANS; i++) {
++ if (esw->vlans[i].vid == val->port_vlan &&
++ esw->vlans[i].ports != RT305X_ESW_PORTS_NONE) {
++ vlan_idx = i;
++ break;
++ }
++ }
++
++ /* select a free slot */
++ for (i = 0; vlan_idx == -1 && i < RT305X_ESW_NUM_VLANS; i++) {
++ if (esw->vlans[i].ports == RT305X_ESW_PORTS_NONE)
++ vlan_idx = i;
++ }
++
++ /* bail if all slots are in use */
++ if (vlan_idx == -1)
++ return -EINVAL;
++
++ ports = RT305X_ESW_PORTS_NONE;
++ for (i = 0; i < val->len; i++) {
++ struct switch_port *p = &val->value.ports[i];
++ int port_mask = 1 << p->id;
++ bool untagged = !(p->flags & (1 << SWITCH_PORT_FLAG_TAGGED));
++
++ if (p->id >= RT305X_ESW_NUM_PORTS)
++ return -EINVAL;
++
++ ports |= port_mask;
++ esw->ports[p->id].untag = untagged;
++ }
++ esw->vlans[vlan_idx].ports = ports;
++ if (ports == RT305X_ESW_PORTS_NONE)
++ esw->vlans[vlan_idx].vid = RT305X_ESW_VLAN_NONE;
++ else
++ esw->vlans[vlan_idx].vid = val->port_vlan;
++
++ return 0;
++}
++
++static const struct switch_attr esw_global[] = {
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "enable_vlan",
++ .description = "VLAN mode (1:enabled)",
++ .max = 1,
++ .id = RT305X_ESW_ATTR_ENABLE_VLAN,
++ .get = esw_get_vlan_enable,
++ .set = esw_set_vlan_enable,
++ },
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "alternate_vlan_disable",
++ .description = "Use en_vlan instead of doubletag to disable"
++ " VLAN mode",
++ .max = 1,
++ .id = RT305X_ESW_ATTR_ALT_VLAN_DISABLE,
++ .get = esw_get_alt_vlan_disable,
++ .set = esw_set_alt_vlan_disable,
++ },
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "bc_storm_protect",
++ .description = "Global broadcast storm protection (0:Disable, 1:64 blocks, 2:96 blocks, 3:128 blocks)",
++ .max = 3,
++ .id = RT305X_ESW_ATTR_BC_STATUS,
++ .get = rt305x_esw_get_bc_status,
++ .set = rt305x_esw_set_bc_status,
++ },
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "led_frequency",
++ .description = "LED Flash frequency (0:30mS, 1:60mS, 2:240mS, 3:480mS)",
++ .max = 3,
++ .id = RT305X_ESW_ATTR_LED_FREQ,
++ .get = rt305x_esw_get_led_freq,
++ .set = rt305x_esw_set_led_freq,
++ }
++};
++
++static const struct switch_attr esw_port[] = {
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "disable",
++ .description = "Port state (1:disabled)",
++ .max = 1,
++ .id = RT305X_ESW_ATTR_PORT_DISABLE,
++ .get = esw_get_port_bool,
++ .set = esw_set_port_bool,
++ },
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "doubletag",
++ .description = "Double tagging for incoming vlan packets "
++ "(1:enabled)",
++ .max = 1,
++ .id = RT305X_ESW_ATTR_PORT_DOUBLETAG,
++ .get = esw_get_port_bool,
++ .set = esw_set_port_bool,
++ },
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "untag",
++ .description = "Untag (1:strip outgoing vlan tag)",
++ .max = 1,
++ .id = RT305X_ESW_ATTR_PORT_UNTAG,
++ .get = esw_get_port_bool,
++ .set = esw_set_port_bool,
++ },
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "led",
++ .description = "LED mode (0:link, 1:100m, 2:duplex, 3:activity,"
++ " 4:collision, 5:linkact, 6:duplcoll, 7:10mact,"
++ " 8:100mact, 10:blink, 11:off, 12:on)",
++ .max = 15,
++ .id = RT305X_ESW_ATTR_PORT_LED,
++ .get = esw_get_port_led,
++ .set = esw_set_port_led,
++ },
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "lan",
++ .description = "HW port group (0:wan, 1:lan)",
++ .max = 1,
++ .id = RT305X_ESW_ATTR_PORT_LAN,
++ .get = esw_get_port_bool,
++ },
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "recv_bad",
++ .description = "Receive bad packet counter",
++ .id = RT305X_ESW_ATTR_PORT_RECV_BAD,
++ .get = esw_get_port_recv_badgood,
++ },
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "recv_good",
++ .description = "Receive good packet counter",
++ .id = RT305X_ESW_ATTR_PORT_RECV_GOOD,
++ .get = esw_get_port_recv_badgood,
++ },
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "tr_bad",
++
++ .description = "Transmit bad packet counter. rt5350 only",
++ .id = RT5350_ESW_ATTR_PORT_TR_BAD,
++ .get = esw_get_port_tr_badgood,
++ },
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "tr_good",
++
++ .description = "Transmit good packet counter. rt5350 only",
++ .id = RT5350_ESW_ATTR_PORT_TR_GOOD,
++ .get = esw_get_port_tr_badgood,
++ },
++};
++
++static const struct switch_attr esw_vlan[] = {
++};
++
++static const struct switch_dev_ops esw_ops = {
++ .attr_global = {
++ .attr = esw_global,
++ .n_attr = ARRAY_SIZE(esw_global),
++ },
++ .attr_port = {
++ .attr = esw_port,
++ .n_attr = ARRAY_SIZE(esw_port),
++ },
++ .attr_vlan = {
++ .attr = esw_vlan,
++ .n_attr = ARRAY_SIZE(esw_vlan),
++ },
++ .get_vlan_ports = esw_get_vlan_ports,
++ .set_vlan_ports = esw_set_vlan_ports,
++ .get_port_pvid = esw_get_port_pvid,
++ .set_port_pvid = esw_set_port_pvid,
++ .get_port_link = esw_get_port_link,
++ .apply_config = esw_apply_config,
++ .reset_switch = esw_reset_switch,
++};
++
++static struct rt305x_esw_platform_data rt3050_esw_data = {
++ /* All ports are LAN ports. */
++ .vlan_config = RT305X_ESW_VLAN_CONFIG_NONE,
++ .reg_initval_fct2 = 0x00d6500c,
++ /*
++ * ext phy base addr 31, enable port 5 polling, rx/tx clock skew 1,
++ * turbo mii off, rgmi 3.3v off
++ * port5: disabled
++ * port6: enabled, gige, full-duplex, rx/tx-flow-control
++ */
++ .reg_initval_fpa2 = 0x3f502b28,
++};
++
++static const struct of_device_id ralink_esw_match[] = {
++ { .compatible = "ralink,rt3050-esw", .data = &rt3050_esw_data },
++ {},
++};
++MODULE_DEVICE_TABLE(of, ralink_esw_match);
++
++static int esw_probe(struct platform_device *pdev)
++{
++ struct device_node *np = pdev->dev.of_node;
++ const struct rt305x_esw_platform_data *pdata;
++ const __be32 *port_map, *reg_init;
++ struct rt305x_esw *esw;
++ struct switch_dev *swdev;
++ struct resource *res, *irq;
++ int err;
++
++ pdata = pdev->dev.platform_data;
++ if (!pdata) {
++ const struct of_device_id *match;
++ match = of_match_device(ralink_esw_match, &pdev->dev);
++ if (match)
++ pdata = (struct rt305x_esw_platform_data *) match->data;
++ }
++ if (!pdata)
++ return -EINVAL;
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!res) {
++ dev_err(&pdev->dev, "no memory resource found\n");
++ return -ENOMEM;
++ }
++
++ irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
++ if (!irq) {
++ dev_err(&pdev->dev, "no irq resource found\n");
++ return -ENOMEM;
++ }
++
++ esw = kzalloc(sizeof(struct rt305x_esw), GFP_KERNEL);
++ if (!esw) {
++ dev_err(&pdev->dev, "no memory for private data\n");
++ return -ENOMEM;
++ }
++
++ esw->dev = &pdev->dev;
++ esw->irq = irq->start;
++ esw->base = ioremap(res->start, resource_size(res));
++ if (!esw->base) {
++ dev_err(&pdev->dev, "ioremap failed\n");
++ err = -ENOMEM;
++ goto free_esw;
++ }
++
++ port_map = of_get_property(np, "ralink,portmap", NULL);
++ if (port_map)
++ esw->port_map = be32_to_cpu(*port_map);
++
++ reg_init = of_get_property(np, "ralink,fct2", NULL);
++ if (reg_init)
++ esw->reg_initval_fct2 = be32_to_cpu(*reg_init);
++
++ reg_init = of_get_property(np, "ralink,fpa2", NULL);
++ if (reg_init)
++ esw->reg_initval_fpa2 = be32_to_cpu(*reg_init);
++
++ reg_init = of_get_property(np, "ralink,led_polarity", NULL);
++ if (reg_init)
++ esw->reg_led_polarity = be32_to_cpu(*reg_init);
++
++ swdev = &esw->swdev;
++ swdev->of_node = pdev->dev.of_node;
++ swdev->name = "rt305x-esw";
++ swdev->alias = "rt305x";
++ swdev->cpu_port = RT305X_ESW_PORT6;
++ swdev->ports = RT305X_ESW_NUM_PORTS;
++ swdev->vlans = RT305X_ESW_NUM_VIDS;
++ swdev->ops = &esw_ops;
++
++ err = register_switch(swdev, NULL);
++ if (err < 0) {
++ dev_err(&pdev->dev, "register_switch failed\n");
++ goto unmap_base;
++ }
++
++ platform_set_drvdata(pdev, esw);
++
++ esw->pdata = pdata;
++ spin_lock_init(&esw->reg_rw_lock);
++
++ esw_hw_init(esw);
++
++ esw_w32(esw, RT305X_ESW_PORT_ST_CHG, RT305X_ESW_REG_ISR);
++ esw_w32(esw, ~RT305X_ESW_PORT_ST_CHG, RT305X_ESW_REG_IMR);
++ request_irq(esw->irq, esw_interrupt, 0, "esw", esw);
++
++ return 0;
++
++unmap_base:
++ iounmap(esw->base);
++free_esw:
++ kfree(esw);
++ return err;
++}
++
++static int esw_remove(struct platform_device *pdev)
++{
++ struct rt305x_esw *esw;
++
++ esw = platform_get_drvdata(pdev);
++ if (esw) {
++ unregister_switch(&esw->swdev);
++ platform_set_drvdata(pdev, NULL);
++ iounmap(esw->base);
++ kfree(esw);
++ }
++
++ return 0;
++}
++
++static struct platform_driver esw_driver = {
++ .probe = esw_probe,
++ .remove = esw_remove,
++ .driver = {
++ .name = "rt305x-esw",
++ .owner = THIS_MODULE,
++ .of_match_table = ralink_esw_match,
++ },
++};
++
++int __init rtesw_init(void)
++{
++ return platform_driver_register(&esw_driver);
++}
++
++void rtesw_exit(void)
++{
++ platform_driver_unregister(&esw_driver);
++}
+diff --git a/drivers/net/ethernet/ralink/esw_rt3052.h b/drivers/net/ethernet/ralink/esw_rt3052.h
+new file mode 100644
+index 0000000..2ced3dff
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/esw_rt3052.h
+@@ -0,0 +1,32 @@
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; version 2 of the License
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ * Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
++ */
++
++#ifndef _RALINK_ESW_RT3052_H__
++#define _RALINK_ESW_RT3052_H__
++
++#ifdef CONFIG_NET_RALINK_ESW_RT3052
++
++int __init rtesw_init(void);
++void rtesw_exit(void);
++
++#else
++
++static inline int __init rtesw_init(void) { return 0; }
++static inline void rtesw_exit(void) { }
++
++#endif
++#endif
+diff --git a/drivers/net/ethernet/ralink/gsw_mt7620a.c b/drivers/net/ethernet/ralink/gsw_mt7620a.c
+new file mode 100644
+index 0000000..70f81e3
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/gsw_mt7620a.c
+@@ -0,0 +1,566 @@
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; version 2 of the License
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ * Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/dma-mapping.h>
++#include <linux/init.h>
++#include <linux/skbuff.h>
++#include <linux/etherdevice.h>
++#include <linux/ethtool.h>
++#include <linux/platform_device.h>
++#include <linux/of_device.h>
++#include <linux/clk.h>
++#include <linux/of_net.h>
++#include <linux/of_mdio.h>
++#include <linux/of_irq.h>
++#include <linux/of_address.h>
++#include <linux/switch.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#include "ralink_soc_eth.h"
++
++#include <linux/ioport.h>
++#include <linux/switch.h>
++#include <linux/mii.h>
++
++#include <ralink_regs.h>
++#include <asm/mach-ralink/mt7620.h>
++
++#include "ralink_soc_eth.h"
++#include "gsw_mt7620a.h"
++#include "mt7530.h"
++#include "mdio.h"
++
++#define GSW_REG_PHY_TIMEOUT (5 * HZ)
++
++#define MT7620A_GSW_REG_PIAC 0x7004
++
++#define GSW_NUM_VLANS 16
++#define GSW_NUM_VIDS 4096
++#define GSW_NUM_PORTS 7
++#define GSW_PORT6 6
++
++#define GSW_MDIO_ACCESS BIT(31)
++#define GSW_MDIO_READ BIT(19)
++#define GSW_MDIO_WRITE BIT(18)
++#define GSW_MDIO_START BIT(16)
++#define GSW_MDIO_ADDR_SHIFT 20
++#define GSW_MDIO_REG_SHIFT 25
++
++#define GSW_REG_PORT_PMCR(x) (0x3000 + (x * 0x100))
++#define GSW_REG_PORT_STATUS(x) (0x3008 + (x * 0x100))
++#define GSW_REG_SMACCR0 0x3fE4
++#define GSW_REG_SMACCR1 0x3fE8
++#define GSW_REG_CKGCR 0x3ff0
++
++#define GSW_REG_IMR 0x7008
++#define GSW_REG_ISR 0x700c
++
++#define SYSC_REG_CFG1 0x14
++
++#define PORT_IRQ_ST_CHG 0x7f
++
++#define SYSCFG1 0x14
++
++#define ESW_PHY_POLLING 0x7000
++
++#define PMCR_IPG BIT(18)
++#define PMCR_MAC_MODE BIT(16)
++#define PMCR_FORCE BIT(15)
++#define PMCR_TX_EN BIT(14)
++#define PMCR_RX_EN BIT(13)
++#define PMCR_BACKOFF BIT(9)
++#define PMCR_BACKPRES BIT(8)
++#define PMCR_RX_FC BIT(5)
++#define PMCR_TX_FC BIT(4)
++#define PMCR_SPEED(_x) (_x << 2)
++#define PMCR_DUPLEX BIT(1)
++#define PMCR_LINK BIT(0)
++
++#define PHY_AN_EN BIT(31)
++#define PHY_PRE_EN BIT(30)
++#define PMY_MDC_CONF(_x) ((_x & 0x3f) << 24)
++
++enum {
++ /* Global attributes. */
++ GSW_ATTR_ENABLE_VLAN,
++ /* Port attributes. */
++ GSW_ATTR_PORT_UNTAG,
++};
++
++enum {
++ PORT4_EPHY = 0,
++ PORT4_EXT,
++};
++
++struct mt7620_gsw {
++ struct device *dev;
++ void __iomem *base;
++ int irq;
++ int port4;
++ long unsigned int autopoll;
++};
++
++static inline void gsw_w32(struct mt7620_gsw *gsw, u32 val, unsigned reg)
++{
++ iowrite32(val, gsw->base + reg);
++}
++
++static inline u32 gsw_r32(struct mt7620_gsw *gsw, unsigned reg)
++{
++ return ioread32(gsw->base + reg);
++}
++
++static int mt7620_mii_busy_wait(struct mt7620_gsw *gsw)
++{
++ unsigned long t_start = jiffies;
++
++ while (1) {
++ if (!(gsw_r32(gsw, MT7620A_GSW_REG_PIAC) & GSW_MDIO_ACCESS))
++ return 0;
++ if (time_after(jiffies, t_start + GSW_REG_PHY_TIMEOUT)) {
++ break;
++ }
++ }
++
++ printk(KERN_ERR "mdio: MDIO timeout\n");
++ return -1;
++}
++
++static u32 _mt7620_mii_write(struct mt7620_gsw *gsw, u32 phy_addr, u32 phy_register,
++ u32 write_data)
++{
++ if (mt7620_mii_busy_wait(gsw))
++ return -1;
++
++ write_data &= 0xffff;
++
++ gsw_w32(gsw, GSW_MDIO_ACCESS | GSW_MDIO_START | GSW_MDIO_WRITE |
++ (phy_register << GSW_MDIO_REG_SHIFT) |
++ (phy_addr << GSW_MDIO_ADDR_SHIFT) | write_data,
++ MT7620A_GSW_REG_PIAC);
++
++ if (mt7620_mii_busy_wait(gsw))
++ return -1;
++
++ return 0;
++}
++
++static u32 _mt7620_mii_read(struct mt7620_gsw *gsw, int phy_addr, int phy_reg)
++{
++ u32 d;
++
++ if (mt7620_mii_busy_wait(gsw))
++ return 0xffff;
++
++ gsw_w32(gsw, GSW_MDIO_ACCESS | GSW_MDIO_START | GSW_MDIO_READ |
++ (phy_reg << GSW_MDIO_REG_SHIFT) |
++ (phy_addr << GSW_MDIO_ADDR_SHIFT),
++ MT7620A_GSW_REG_PIAC);
++
++ if (mt7620_mii_busy_wait(gsw))
++ return 0xffff;
++
++ d = gsw_r32(gsw, MT7620A_GSW_REG_PIAC) & 0xffff;
++
++ return d;
++}
++
++int mt7620_mdio_write(struct mii_bus *bus, int phy_addr, int phy_reg, u16 val)
++{
++ struct fe_priv *priv = bus->priv;
++ struct mt7620_gsw *gsw = (struct mt7620_gsw *) priv->soc->swpriv;
++
++ return _mt7620_mii_write(gsw, phy_addr, phy_reg, val);
++}
++
++int mt7620_mdio_read(struct mii_bus *bus, int phy_addr, int phy_reg)
++{
++ struct fe_priv *priv = bus->priv;
++ struct mt7620_gsw *gsw = (struct mt7620_gsw *) priv->soc->swpriv;
++
++ return _mt7620_mii_read(gsw, phy_addr, phy_reg);
++}
++
++static unsigned char *fe_speed_str(int speed)
++{
++ switch (speed) {
++ case 2:
++ case SPEED_1000:
++ return "1000";
++ case 1:
++ case SPEED_100:
++ return "100";
++ case 0:
++ case SPEED_10:
++ return "10";
++ }
++
++ return "? ";
++}
++
++int mt7620a_has_carrier(struct fe_priv *priv)
++{
++ struct mt7620_gsw *gsw = (struct mt7620_gsw *) priv->soc->swpriv;
++ int i;
++
++ for (i = 0; i < GSW_PORT6; i++)
++ if (gsw_r32(gsw, GSW_REG_PORT_STATUS(i)) & 0x1)
++ return 1;
++ return 0;
++}
++
++static void mt7620a_handle_carrier(struct fe_priv *priv)
++{
++ if (!priv->phy)
++ return;
++
++ if (mt7620a_has_carrier(priv))
++ netif_carrier_on(priv->netdev);
++ else
++ netif_carrier_off(priv->netdev);
++}
++
++void mt7620_mdio_link_adjust(struct fe_priv *priv, int port)
++{
++ if (priv->link[port])
++ netdev_info(priv->netdev, "port %d link up (%sMbps/%s duplex)\n",
++ port, fe_speed_str(priv->phy->speed[port]),
++ (DUPLEX_FULL == priv->phy->duplex[port]) ? "Full" : "Half");
++ else
++ netdev_info(priv->netdev, "port %d link down\n", port);
++ mt7620a_handle_carrier(priv);
++}
++
++static irqreturn_t gsw_interrupt(int irq, void *_priv)
++{
++ struct fe_priv *priv = (struct fe_priv *) _priv;
++ struct mt7620_gsw *gsw = (struct mt7620_gsw *) priv->soc->swpriv;
++ u32 status;
++ int i, max = (gsw->port4 == PORT4_EPHY) ? (4) : (3);
++
++ status = gsw_r32(gsw, GSW_REG_ISR);
++ if (status & PORT_IRQ_ST_CHG)
++ for (i = 0; i <= max; i++) {
++ u32 status = gsw_r32(gsw, GSW_REG_PORT_STATUS(i));
++ int link = status & 0x1;
++
++ if (link != priv->link[i]) {
++ if (link)
++ netdev_info(priv->netdev, "port %d link up (%sMbps/%s duplex)\n",
++ i, fe_speed_str((status >> 2) & 3),
++ (status & 0x2) ? "Full" : "Half");
++ else
++ netdev_info(priv->netdev, "port %d link down\n", i);
++ }
++
++ priv->link[i] = link;
++ }
++ mt7620a_handle_carrier(priv);
++
++ gsw_w32(gsw, status, GSW_REG_ISR);
++
++ return IRQ_HANDLED;
++}
++
++static int mt7620_is_bga(void)
++{
++ u32 bga = rt_sysc_r32(0x0c);
++
++ return (bga >> 16) & 1;
++}
++
++static void gsw_auto_poll(struct mt7620_gsw *gsw)
++{
++ int phy;
++ int lsb = -1, msb = 0;
++
++ for_each_set_bit(phy, &gsw->autopoll, 32) {
++ if (lsb < 0)
++ lsb = phy;
++ msb = phy;
++ }
++
++ gsw_w32(gsw, PHY_AN_EN | PHY_PRE_EN | PMY_MDC_CONF(5) | (msb << 8) | lsb, ESW_PHY_POLLING);
++}
++
++void mt7620_port_init(struct fe_priv *priv, struct device_node *np)
++{
++ struct mt7620_gsw *gsw = (struct mt7620_gsw *) priv->soc->swpriv;
++ const __be32 *_id = of_get_property(np, "reg", NULL);
++ int phy_mode, size, id;
++ int shift = 12;
++ u32 val, mask = 0;
++ int min = (gsw->port4 == PORT4_EPHY) ? (5) : (4);
++
++ if (!_id || (be32_to_cpu(*_id) < min) || (be32_to_cpu(*_id) > 5)) {
++ if (_id)
++ pr_err("%s: invalid port id %d\n", np->name, be32_to_cpu(*_id));
++ else
++ pr_err("%s: invalid port id\n", np->name);
++ return;
++ }
++
++ id = be32_to_cpu(*_id);
++
++ if (id == 4)
++ shift = 14;
++
++ priv->phy->phy_fixed[id] = of_get_property(np, "ralink,fixed-link", &size);
++ if (priv->phy->phy_fixed[id] && (size != (4 * sizeof(*priv->phy->phy_fixed[id])))) {
++ pr_err("%s: invalid fixed link property\n", np->name);
++ priv->phy->phy_fixed[id] = NULL;
++ return;
++ }
++
++ phy_mode = of_get_phy_mode(np);
++ switch (phy_mode) {
++ case PHY_INTERFACE_MODE_RGMII:
++ mask = 0;
++ break;
++ case PHY_INTERFACE_MODE_MII:
++ mask = 1;
++ break;
++ case PHY_INTERFACE_MODE_RMII:
++ mask = 2;
++ break;
++ default:
++ dev_err(priv->device, "port %d - invalid phy mode\n", id);
++ return;
++ }
++
++ priv->phy->phy_node[id] = of_parse_phandle(np, "phy-handle", 0);
++ if (!priv->phy->phy_node[id] && !priv->phy->phy_fixed[id])
++ return;
++
++ val = rt_sysc_r32(SYSCFG1);
++ val &= ~(3 << shift);
++ val |= mask << shift;
++ rt_sysc_w32(val, SYSCFG1);
++
++ if (priv->phy->phy_fixed[id]) {
++ const __be32 *link = priv->phy->phy_fixed[id];
++ int tx_fc, rx_fc;
++ u32 val = 0;
++
++ priv->phy->speed[id] = be32_to_cpup(link++);
++ tx_fc = be32_to_cpup(link++);
++ rx_fc = be32_to_cpup(link++);
++ priv->phy->duplex[id] = be32_to_cpup(link++);
++ priv->link[id] = 1;
++
++ switch (priv->phy->speed[id]) {
++ case SPEED_10:
++ val = 0;
++ break;
++ case SPEED_100:
++ val = 1;
++ break;
++ case SPEED_1000:
++ val = 2;
++ break;
++ default:
++ dev_err(priv->device, "invalid link speed: %d\n", priv->phy->speed[id]);
++ priv->phy->phy_fixed[id] = 0;
++ return;
++ }
++ val = PMCR_SPEED(val);
++ val |= PMCR_LINK | PMCR_BACKPRES | PMCR_BACKOFF | PMCR_RX_EN |
++ PMCR_TX_EN | PMCR_FORCE | PMCR_MAC_MODE | PMCR_IPG;
++ if (tx_fc)
++ val |= PMCR_TX_FC;
++ if (rx_fc)
++ val |= PMCR_RX_FC;
++ if (priv->phy->duplex[id])
++ val |= PMCR_DUPLEX;
++ gsw_w32(gsw, val, GSW_REG_PORT_PMCR(id));
++ dev_info(priv->device, "using fixed link parameters\n");
++ return;
++ }
++
++ if (priv->phy->phy_node[id] && priv->mii_bus->phy_map[id]) {
++ u32 val = PMCR_BACKPRES | PMCR_BACKOFF | PMCR_RX_EN |
++ PMCR_TX_EN | PMCR_MAC_MODE | PMCR_IPG;
++
++ gsw_w32(gsw, val, GSW_REG_PORT_PMCR(id));
++ fe_connect_phy_node(priv, priv->phy->phy_node[id]);
++ gsw->autopoll |= BIT(id);
++ gsw_auto_poll(gsw);
++ return;
++ }
++}
++
++static void gsw_hw_init(struct mt7620_gsw *gsw)
++{
++ u32 is_BGA = mt7620_is_bga();
++
++ rt_sysc_w32(rt_sysc_r32(SYSC_REG_CFG1) | BIT(8), SYSC_REG_CFG1);
++ gsw_w32(gsw, gsw_r32(gsw, GSW_REG_CKGCR) & ~(0x3 << 4), GSW_REG_CKGCR);
++
++ /*correct PHY setting L3.0 BGA*/
++ _mt7620_mii_write(gsw, 1, 31, 0x4000); //global, page 4
++
++ _mt7620_mii_write(gsw, 1, 17, 0x7444);
++ if (is_BGA)
++ _mt7620_mii_write(gsw, 1, 19, 0x0114);
++ else
++ _mt7620_mii_write(gsw, 1, 19, 0x0117);
++
++ _mt7620_mii_write(gsw, 1, 22, 0x10cf);
++ _mt7620_mii_write(gsw, 1, 25, 0x6212);
++ _mt7620_mii_write(gsw, 1, 26, 0x0777);
++ _mt7620_mii_write(gsw, 1, 29, 0x4000);
++ _mt7620_mii_write(gsw, 1, 28, 0xc077);
++ _mt7620_mii_write(gsw, 1, 24, 0x0000);
++
++ _mt7620_mii_write(gsw, 1, 31, 0x3000); //global, page 3
++ _mt7620_mii_write(gsw, 1, 17, 0x4838);
++
++ _mt7620_mii_write(gsw, 1, 31, 0x2000); //global, page 2
++ if (is_BGA) {
++ _mt7620_mii_write(gsw, 1, 21, 0x0515);
++ _mt7620_mii_write(gsw, 1, 22, 0x0053);
++ _mt7620_mii_write(gsw, 1, 23, 0x00bf);
++ _mt7620_mii_write(gsw, 1, 24, 0x0aaf);
++ _mt7620_mii_write(gsw, 1, 25, 0x0fad);
++ _mt7620_mii_write(gsw, 1, 26, 0x0fc1);
++ } else {
++ _mt7620_mii_write(gsw, 1, 21, 0x0517);
++ _mt7620_mii_write(gsw, 1, 22, 0x0fd2);
++ _mt7620_mii_write(gsw, 1, 23, 0x00bf);
++ _mt7620_mii_write(gsw, 1, 24, 0x0aab);
++ _mt7620_mii_write(gsw, 1, 25, 0x00ae);
++ _mt7620_mii_write(gsw, 1, 26, 0x0fff);
++ }
++ _mt7620_mii_write(gsw, 1, 31, 0x1000); //global, page 1
++ _mt7620_mii_write(gsw, 1, 17, 0xe7f8);
++
++ _mt7620_mii_write(gsw, 1, 31, 0x8000); //local, page 0
++ _mt7620_mii_write(gsw, 0, 30, 0xa000);
++ _mt7620_mii_write(gsw, 1, 30, 0xa000);
++ _mt7620_mii_write(gsw, 2, 30, 0xa000);
++ _mt7620_mii_write(gsw, 3, 30, 0xa000);
++
++ _mt7620_mii_write(gsw, 0, 4, 0x05e1);
++ _mt7620_mii_write(gsw, 1, 4, 0x05e1);
++ _mt7620_mii_write(gsw, 2, 4, 0x05e1);
++ _mt7620_mii_write(gsw, 3, 4, 0x05e1);
++ _mt7620_mii_write(gsw, 1, 31, 0xa000); //local, page 2
++ _mt7620_mii_write(gsw, 0, 16, 0x1111);
++ _mt7620_mii_write(gsw, 1, 16, 0x1010);
++ _mt7620_mii_write(gsw, 2, 16, 0x1515);
++ _mt7620_mii_write(gsw, 3, 16, 0x0f0f);
++
++ /* CPU Port6 Force Link 1G, FC ON */
++ gsw_w32(gsw, 0x5e33b, GSW_REG_PORT_PMCR(6));
++ /* Set Port6 CPU Port */
++ gsw_w32(gsw, 0x7f7f7fe0, 0x0010);
++
++ /* setup port 4 */
++ if (gsw->port4 == PORT4_EPHY) {
++ u32 val = rt_sysc_r32(SYSCFG1);
++ val |= 3 << 14;
++ rt_sysc_w32(val, SYSCFG1);
++ _mt7620_mii_write(gsw, 4, 30, 0xa000);
++ _mt7620_mii_write(gsw, 4, 4, 0x05e1);
++ _mt7620_mii_write(gsw, 4, 16, 0x1313);
++ pr_info("gsw: setting port4 to ephy mode\n");
++ }
++}
++
++void mt7620_set_mac(struct fe_priv *priv, unsigned char *mac)
++{
++ struct mt7620_gsw *gsw = (struct mt7620_gsw *) priv->soc->swpriv;
++ unsigned long flags;
++
++ spin_lock_irqsave(&priv->page_lock, flags);
++ gsw_w32(gsw, (mac[0] << 8) | mac[1], GSW_REG_SMACCR1);
++ gsw_w32(gsw, (mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5],
++ GSW_REG_SMACCR0);
++ spin_unlock_irqrestore(&priv->page_lock, flags);
++}
++
++static struct of_device_id gsw_match[] = {
++ { .compatible = "ralink,mt7620a-gsw" },
++ {}
++};
++
++int mt7620_gsw_config(struct fe_priv *priv)
++{
++ struct mt7620_gsw *gsw = (struct mt7620_gsw *) priv->soc->swpriv;
++
++ /* is the mt7530 internal or external */
++ if ((_mt7620_mii_read(gsw, 0x1f, 2) == 1) && (_mt7620_mii_read(gsw, 0x1f, 3) == 0xbeef))
++ mt7530_probe(priv->device, NULL, priv->mii_bus);
++ else
++ mt7530_probe(priv->device, gsw->base, NULL);
++
++ return 0;
++}
++
++int mt7620_gsw_probe(struct fe_priv *priv)
++{
++ struct mt7620_gsw *gsw;
++ struct device_node *np;
++ const char *port4 = NULL;
++
++ np = of_find_matching_node(NULL, gsw_match);
++ if (!np) {
++ dev_err(priv->device, "no gsw node found\n");
++ return -EINVAL;
++ }
++ np = of_node_get(np);
++
++ gsw = devm_kzalloc(priv->device, sizeof(struct mt7620_gsw), GFP_KERNEL);
++ if (!gsw) {
++ dev_err(priv->device, "no gsw memory for private data\n");
++ return -ENOMEM;
++ }
++
++ gsw->irq = irq_of_parse_and_map(np, 0);
++ if (!gsw->irq) {
++ dev_err(priv->device, "no gsw irq resource found\n");
++ return -ENOMEM;
++ }
++
++ gsw->base = of_iomap(np, 0);
++ if (!gsw->base) {
++ dev_err(priv->device, "gsw ioremap failed\n");
++ return -ENOMEM;
++ }
++
++ gsw->dev = priv->device;
++ priv->soc->swpriv = gsw;
++
++ of_property_read_string(np, "ralink,port4", &port4);
++ if (port4 && !strcmp(port4, "ephy"))
++ gsw->port4 = PORT4_EPHY;
++ else if (port4 && !strcmp(port4, "gmac"))
++ gsw->port4 = PORT4_EXT;
++ else
++ WARN_ON(port4);
++
++ gsw_hw_init(gsw);
++
++ gsw_w32(gsw, ~PORT_IRQ_ST_CHG, GSW_REG_IMR);
++ request_irq(gsw->irq, gsw_interrupt, 0, "gsw", priv);
++
++ return 0;
++}
+diff --git a/drivers/net/ethernet/ralink/gsw_mt7620a.h b/drivers/net/ethernet/ralink/gsw_mt7620a.h
+new file mode 100644
+index 0000000..c87761a
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/gsw_mt7620a.h
+@@ -0,0 +1,30 @@
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; version 2 of the License
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ * Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
++ */
++
++#ifndef _RALINK_GSW_MT7620_H__
++#define _RALINK_GSW_MT7620_H__
++
++extern int mt7620_gsw_config(struct fe_priv *priv);
++extern int mt7620_gsw_probe(struct fe_priv *priv);
++extern void mt7620_set_mac(struct fe_priv *priv, unsigned char *mac);
++extern int mt7620_mdio_write(struct mii_bus *bus, int phy_addr, int phy_reg, u16 val);
++extern int mt7620_mdio_read(struct mii_bus *bus, int phy_addr, int phy_reg);
++extern void mt7620_mdio_link_adjust(struct fe_priv *priv, int port);
++extern void mt7620_port_init(struct fe_priv *priv, struct device_node *np);
++extern int mt7620a_has_carrier(struct fe_priv *priv);
++
++#endif
+diff --git a/drivers/net/ethernet/ralink/mdio.c b/drivers/net/ethernet/ralink/mdio.c
+new file mode 100644
+index 0000000..32bf98b
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/mdio.c
+@@ -0,0 +1,244 @@
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; version 2 of the License
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ * Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/dma-mapping.h>
++#include <linux/init.h>
++#include <linux/skbuff.h>
++#include <linux/etherdevice.h>
++#include <linux/ethtool.h>
++#include <linux/platform_device.h>
++#include <linux/phy.h>
++#include <linux/of_device.h>
++#include <linux/clk.h>
++#include <linux/of_net.h>
++#include <linux/of_mdio.h>
++
++#include "ralink_soc_eth.h"
++#include "mdio.h"
++
++static int fe_mdio_reset(struct mii_bus *bus)
++{
++ /* TODO */
++ return 0;
++}
++
++static void fe_phy_link_adjust(struct net_device *dev)
++{
++ struct fe_priv *priv = netdev_priv(dev);
++ unsigned long flags;
++ int i;
++
++ spin_lock_irqsave(&priv->phy->lock, flags);
++ for (i = 0; i < 8; i++) {
++ if (priv->phy->phy_node[i]) {
++ struct phy_device *phydev = priv->phy->phy[i];
++ int status_change = 0;
++
++ if (phydev->link)
++ if (priv->phy->duplex[i] != phydev->duplex ||
++ priv->phy->speed[i] != phydev->speed)
++ status_change = 1;
++
++ if (phydev->link != priv->link[i])
++ status_change = 1;
++
++ switch (phydev->speed) {
++ case SPEED_1000:
++ case SPEED_100:
++ case SPEED_10:
++ priv->link[i] = phydev->link;
++ priv->phy->duplex[i] = phydev->duplex;
++ priv->phy->speed[i] = phydev->speed;
++
++ if (status_change && priv->soc->mdio_adjust_link)
++ priv->soc->mdio_adjust_link(priv, i);
++ break;
++ }
++ }
++ }
++}
++
++int fe_connect_phy_node(struct fe_priv *priv, struct device_node *phy_node)
++{
++ const __be32 *_port = NULL;
++ struct phy_device *phydev;
++ int phy_mode, port;
++
++ _port = of_get_property(phy_node, "reg", NULL);
++
++ if (!_port || (be32_to_cpu(*_port) >= 0x20)) {
++ pr_err("%s: invalid port id\n", phy_node->name);
++ return -EINVAL;
++ }
++ port = be32_to_cpu(*_port);
++ phy_mode = of_get_phy_mode(phy_node);
++ if (phy_mode < 0) {
++ dev_err(priv->device, "incorrect phy-mode %d\n", phy_mode);
++ priv->phy->phy_node[port] = NULL;
++ return -EINVAL;
++ }
++
++ phydev = of_phy_connect(priv->netdev, phy_node, fe_phy_link_adjust,
++ 0, phy_mode);
++ if (IS_ERR(phydev)) {
++ dev_err(priv->device, "could not connect to PHY\n");
++ priv->phy->phy_node[port] = NULL;
++ return PTR_ERR(phydev);
++ }
++
++ phydev->supported &= PHY_GBIT_FEATURES;
++ phydev->advertising = phydev->supported;
++ phydev->no_auto_carrier_off = 1;
++
++ dev_info(priv->device,
++ "connected port %d to PHY at %s [uid=%08x, driver=%s]\n",
++ port, dev_name(&phydev->dev), phydev->phy_id,
++ phydev->drv->name);
++
++ priv->phy->phy[port] = phydev;
++ priv->link[port] = 0;
++
++ return 0;
++}
++
++static int fe_phy_connect(struct fe_priv *priv)
++{
++ return 0;
++}
++
++static void fe_phy_disconnect(struct fe_priv *priv)
++{
++ unsigned long flags;
++ int i;
++
++ for (i = 0; i < 8; i++)
++ if (priv->phy->phy_fixed[i]) {
++ spin_lock_irqsave(&priv->phy->lock, flags);
++ priv->link[i] = 0;
++ if (priv->soc->mdio_adjust_link)
++ priv->soc->mdio_adjust_link(priv, i);
++ spin_unlock_irqrestore(&priv->phy->lock, flags);
++ } else if (priv->phy->phy[i]) {
++ phy_disconnect(priv->phy->phy[i]);
++ }
++}
++
++static void fe_phy_start(struct fe_priv *priv)
++{
++ unsigned long flags;
++ int i;
++
++ for (i = 0; i < 8; i++) {
++ if (priv->phy->phy_fixed[i]) {
++ spin_lock_irqsave(&priv->phy->lock, flags);
++ priv->link[i] = 1;
++ if (priv->soc->mdio_adjust_link)
++ priv->soc->mdio_adjust_link(priv, i);
++ spin_unlock_irqrestore(&priv->phy->lock, flags);
++ } else if (priv->phy->phy[i]) {
++ phy_start(priv->phy->phy[i]);
++ }
++ }
++}
++
++static void fe_phy_stop(struct fe_priv *priv)
++{
++ unsigned long flags;
++ int i;
++
++ for (i = 0; i < 8; i++)
++ if (priv->phy->phy_fixed[i]) {
++ spin_lock_irqsave(&priv->phy->lock, flags);
++ priv->link[i] = 0;
++ if (priv->soc->mdio_adjust_link)
++ priv->soc->mdio_adjust_link(priv, i);
++ spin_unlock_irqrestore(&priv->phy->lock, flags);
++ } else if (priv->phy->phy[i]) {
++ phy_stop(priv->phy->phy[i]);
++ }
++}
++
++static struct fe_phy phy_ralink = {
++ .connect = fe_phy_connect,
++ .disconnect = fe_phy_disconnect,
++ .start = fe_phy_start,
++ .stop = fe_phy_stop,
++};
++
++int fe_mdio_init(struct fe_priv *priv)
++{
++ struct device_node *mii_np;
++ int err;
++
++ if (!priv->soc->mdio_read || !priv->soc->mdio_write)
++ return 0;
++
++ spin_lock_init(&phy_ralink.lock);
++ priv->phy = &phy_ralink;
++
++ mii_np = of_get_child_by_name(priv->device->of_node, "mdio-bus");
++ if (!mii_np) {
++ dev_err(priv->device, "no %s child node found", "mdio-bus");
++ return -ENODEV;
++ }
++
++ if (!of_device_is_available(mii_np)) {
++ err = 0;
++ goto err_put_node;
++ }
++
++ priv->mii_bus = mdiobus_alloc();
++ if (priv->mii_bus == NULL) {
++ err = -ENOMEM;
++ goto err_put_node;
++ }
++
++ priv->mii_bus->name = "mdio";
++ priv->mii_bus->read = priv->soc->mdio_read;
++ priv->mii_bus->write = priv->soc->mdio_write;
++ priv->mii_bus->reset = fe_mdio_reset;
++ priv->mii_bus->irq = priv->mii_irq;
++ priv->mii_bus->priv = priv;
++ priv->mii_bus->parent = priv->device;
++
++ snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%s", mii_np->name);
++ err = of_mdiobus_register(priv->mii_bus, mii_np);
++ if (err)
++ goto err_free_bus;
++
++ return 0;
++
++err_free_bus:
++ kfree(priv->mii_bus);
++err_put_node:
++ of_node_put(mii_np);
++ priv->mii_bus = NULL;
++ return err;
++}
++
++void fe_mdio_cleanup(struct fe_priv *priv)
++{
++ if (!priv->mii_bus)
++ return;
++
++ mdiobus_unregister(priv->mii_bus);
++ of_node_put(priv->mii_bus->dev.of_node);
++ kfree(priv->mii_bus);
++}
+diff --git a/drivers/net/ethernet/ralink/mdio.h b/drivers/net/ethernet/ralink/mdio.h
+new file mode 100644
+index 0000000..c3910a0
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/mdio.h
+@@ -0,0 +1,29 @@
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; version 2 of the License
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ * Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
++ */
++
++#ifndef _RALINK_MDIO_H__
++#define _RALINK_MDIO_H__
++
++#ifdef CONFIG_NET_RALINK_MDIO
++extern int fe_mdio_init(struct fe_priv *priv);
++extern void fe_mdio_cleanup(struct fe_priv *priv);
++extern int fe_connect_phy_node(struct fe_priv *priv, struct device_node *phy_node);
++#else
++static inline int fe_mdio_init(struct fe_priv *priv) { return 0; }
++static inline void fe_mdio_cleanup(struct fe_priv *priv) {}
++#endif
++#endif
+diff --git a/drivers/net/ethernet/ralink/mdio_rt2880.c b/drivers/net/ethernet/ralink/mdio_rt2880.c
+new file mode 100644
+index 0000000..b99eb46
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/mdio_rt2880.c
+@@ -0,0 +1,232 @@
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; version 2 of the License
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ * Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/dma-mapping.h>
++#include <linux/init.h>
++#include <linux/skbuff.h>
++#include <linux/etherdevice.h>
++#include <linux/ethtool.h>
++#include <linux/platform_device.h>
++#include <linux/phy.h>
++#include <linux/of_device.h>
++#include <linux/clk.h>
++#include <linux/of_net.h>
++#include <linux/of_mdio.h>
++
++#include "ralink_soc_eth.h"
++#include "mdio_rt2880.h"
++#include "mdio.h"
++
++#define FE_MDIO_RETRY 1000
++
++static unsigned char *rt2880_speed_str(struct fe_priv *priv)
++{
++ switch (priv->phy->speed[0]) {
++ case SPEED_1000:
++ return "1000";
++ case SPEED_100:
++ return "100";
++ case SPEED_10:
++ return "10";
++ }
++
++ return "?";
++}
++
++void rt2880_mdio_link_adjust(struct fe_priv *priv, int port)
++{
++ u32 mdio_cfg;
++
++ if (!priv->link[0]) {
++ netif_carrier_off(priv->netdev);
++ netdev_info(priv->netdev, "link down\n");
++ return;
++ }
++
++ mdio_cfg = FE_MDIO_CFG_TX_CLK_SKEW_200 |
++ FE_MDIO_CFG_RX_CLK_SKEW_200 |
++ FE_MDIO_CFG_GP1_FRC_EN;
++
++ if (priv->phy->duplex[0] == DUPLEX_FULL)
++ mdio_cfg |= FE_MDIO_CFG_GP1_DUPLEX;
++
++ if (priv->phy->tx_fc[0])
++ mdio_cfg |= FE_MDIO_CFG_GP1_FC_TX;
++
++ if (priv->phy->rx_fc[0])
++ mdio_cfg |= FE_MDIO_CFG_GP1_FC_RX;
++
++ switch (priv->phy->speed[0]) {
++ case SPEED_10:
++ mdio_cfg |= FE_MDIO_CFG_GP1_SPEED_10;
++ break;
++ case SPEED_100:
++ mdio_cfg |= FE_MDIO_CFG_GP1_SPEED_100;
++ break;
++ case SPEED_1000:
++ mdio_cfg |= FE_MDIO_CFG_GP1_SPEED_1000;
++ break;
++ default:
++ BUG();
++ }
++
++ fe_w32(mdio_cfg, FE_MDIO_CFG);
++
++ netif_carrier_on(priv->netdev);
++ netdev_info(priv->netdev, "link up (%sMbps/%s duplex)\n",
++ rt2880_speed_str(priv),
++ (DUPLEX_FULL == priv->phy->duplex[0]) ? "Full" : "Half");
++}
++
++static int rt2880_mdio_wait_ready(struct fe_priv *priv)
++{
++ int retries;
++
++ retries = FE_MDIO_RETRY;
++ while (1) {
++ u32 t;
++
++ t = fe_r32(FE_MDIO_ACCESS);
++ if ((t & (0x1 << 31)) == 0)
++ return 0;
++
++ if (retries-- == 0)
++ break;
++
++ udelay(1);
++ }
++
++ dev_err(priv->device, "MDIO operation timed out\n");
++ return -ETIMEDOUT;
++}
++
++int rt2880_mdio_read(struct mii_bus *bus, int phy_addr, int phy_reg)
++{
++ struct fe_priv *priv = bus->priv;
++ int err;
++ u32 t;
++
++ err = rt2880_mdio_wait_ready(priv);
++ if (err)
++ return 0xffff;
++
++ t = (phy_addr << 24) | (phy_reg << 16);
++ fe_w32(t, FE_MDIO_ACCESS);
++ t |= (1 << 31);
++ fe_w32(t, FE_MDIO_ACCESS);
++
++ err = rt2880_mdio_wait_ready(priv);
++ if (err)
++ return 0xffff;
++
++ pr_debug("%s: addr=%04x, reg=%04x, value=%04x\n", __func__,
++ phy_addr, phy_reg, fe_r32(FE_MDIO_ACCESS) & 0xffff);
++
++ return fe_r32(FE_MDIO_ACCESS) & 0xffff;
++}
++
++int rt2880_mdio_write(struct mii_bus *bus, int phy_addr, int phy_reg, u16 val)
++{
++ struct fe_priv *priv = bus->priv;
++ int err;
++ u32 t;
++
++ pr_debug("%s: addr=%04x, reg=%04x, value=%04x\n", __func__,
++ phy_addr, phy_reg, fe_r32(FE_MDIO_ACCESS) & 0xffff);
++
++ err = rt2880_mdio_wait_ready(priv);
++ if (err)
++ return err;
++
++ t = (1 << 30) | (phy_addr << 24) | (phy_reg << 16) | val;
++ fe_w32(t, FE_MDIO_ACCESS);
++ t |= (1 << 31);
++ fe_w32(t, FE_MDIO_ACCESS);
++
++ return rt2880_mdio_wait_ready(priv);
++}
++
++void rt2880_port_init(struct fe_priv *priv, struct device_node *np)
++{
++ const __be32 *id = of_get_property(np, "reg", NULL);
++ const __be32 *link;
++ int size;
++ int phy_mode;
++
++ if (!id || (be32_to_cpu(*id) != 0)) {
++ pr_err("%s: invalid port id\n", np->name);
++ return;
++ }
++
++ priv->phy->phy_fixed[0] = of_get_property(np, "ralink,fixed-link", &size);
++ if (priv->phy->phy_fixed[0] && (size != (4 * sizeof(*priv->phy->phy_fixed[0])))) {
++ pr_err("%s: invalid fixed link property\n", np->name);
++ priv->phy->phy_fixed[0] = NULL;
++ return;
++ }
++
++ phy_mode = of_get_phy_mode(np);
++ switch (phy_mode) {
++ case PHY_INTERFACE_MODE_RGMII:
++ break;
++ case PHY_INTERFACE_MODE_MII:
++ break;
++ case PHY_INTERFACE_MODE_RMII:
++ break;
++ default:
++ if (!priv->phy->phy_fixed[0])
++ dev_err(priv->device, "port %d - invalid phy mode\n", priv->phy->speed[0]);
++ break;
++ }
++
++ priv->phy->phy_node[0] = of_parse_phandle(np, "phy-handle", 0);
++ if (!priv->phy->phy_node[0] && !priv->phy->phy_fixed[0])
++ return;
++
++ if (priv->phy->phy_fixed[0]) {
++ link = priv->phy->phy_fixed[0];
++ priv->phy->speed[0] = be32_to_cpup(link++);
++ priv->phy->duplex[0] = be32_to_cpup(link++);
++ priv->phy->tx_fc[0] = be32_to_cpup(link++);
++ priv->phy->rx_fc[0] = be32_to_cpup(link++);
++
++ priv->link[0] = 1;
++ switch (priv->phy->speed[0]) {
++ case SPEED_10:
++ break;
++ case SPEED_100:
++ break;
++ case SPEED_1000:
++ break;
++ default:
++ dev_err(priv->device, "invalid link speed: %d\n", priv->phy->speed[0]);
++ priv->phy->phy_fixed[0] = 0;
++ return;
++ }
++ dev_info(priv->device, "using fixed link parameters\n");
++ rt2880_mdio_link_adjust(priv, 0);
++ return;
++ }
++ if (priv->phy->phy_node[0] && priv->mii_bus->phy_map[0]) {
++ fe_connect_phy_node(priv, priv->phy->phy_node[0]);
++ }
++
++ return;
++}
+diff --git a/drivers/net/ethernet/ralink/mdio_rt2880.h b/drivers/net/ethernet/ralink/mdio_rt2880.h
+new file mode 100644
+index 0000000..51e3633
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/mdio_rt2880.h
+@@ -0,0 +1,26 @@
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; version 2 of the License
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ * Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
++ */
++
++#ifndef _RALINK_MDIO_RT2880_H__
++#define _RALINK_MDIO_RT2880_H__
++
++void rt2880_mdio_link_adjust(struct fe_priv *priv, int port);
++int rt2880_mdio_read(struct mii_bus *bus, int phy_addr, int phy_reg);
++int rt2880_mdio_write(struct mii_bus *bus, int phy_addr, int phy_reg, u16 val);
++void rt2880_port_init(struct fe_priv *priv, struct device_node *np);
++
++#endif
+diff --git a/drivers/net/ethernet/ralink/mt7530.c b/drivers/net/ethernet/ralink/mt7530.c
+new file mode 100644
+index 0000000..06b67ee
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/mt7530.c
+@@ -0,0 +1,579 @@
++/*
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/if.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/list.h>
++#include <linux/if_ether.h>
++#include <linux/skbuff.h>
++#include <linux/netdevice.h>
++#include <linux/netlink.h>
++#include <linux/bitops.h>
++#include <net/genetlink.h>
++#include <linux/switch.h>
++#include <linux/delay.h>
++#include <linux/phy.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/lockdep.h>
++#include <linux/workqueue.h>
++#include <linux/of_device.h>
++
++#include "mt7530.h"
++
++#define MT7530_CPU_PORT 6
++#define MT7530_NUM_PORTS 8
++#define MT7530_NUM_VLANS 16
++#define MT7530_MAX_VID 4095
++#define MT7530_MIN_VID 0
++
++/* registers */
++#define REG_ESW_VLAN_VTCR 0x90
++#define REG_ESW_VLAN_VAWD1 0x94
++#define REG_ESW_VLAN_VAWD2 0x98
++#define REG_ESW_VLAN_VTIM(x) (0x100 + 4 * ((x) / 2))
++
++#define REG_ESW_VLAN_VAWD1_IVL_MAC BIT(30)
++#define REG_ESW_VLAN_VAWD1_VTAG_EN BIT(28)
++#define REG_ESW_VLAN_VAWD1_VALID BIT(0)
++
++/* vlan egress mode */
++enum {
++ ETAG_CTRL_UNTAG = 0,
++ ETAG_CTRL_TAG = 2,
++ ETAG_CTRL_SWAP = 1,
++ ETAG_CTRL_STACK = 3,
++};
++
++#define REG_ESW_PORT_PCR(x) (0x2004 | ((x) << 8))
++#define REG_ESW_PORT_PVC(x) (0x2010 | ((x) << 8))
++#define REG_ESW_PORT_PPBV1(x) (0x2014 | ((x) << 8))
++enum {
++ /* Global attributes. */
++ MT7530_ATTR_ENABLE_VLAN,
++};
++
++struct mt7530_port_entry {
++ u16 pvid;
++};
++
++struct mt7530_vlan_entry {
++ u16 vid;
++ u8 member;
++ u8 etags;
++};
++
++struct mt7530_priv {
++ void __iomem *base;
++ struct mii_bus *bus;
++ struct switch_dev swdev;
++
++ bool global_vlan_enable;
++ struct mt7530_vlan_entry vlan_entries[MT7530_NUM_VLANS];
++ struct mt7530_port_entry port_entries[MT7530_NUM_PORTS];
++};
++
++struct mt7530_mapping {
++ char *name;
++ u16 pvids[MT7530_NUM_PORTS];
++ u8 members[MT7530_NUM_VLANS];
++ u8 etags[MT7530_NUM_VLANS];
++ u16 vids[MT7530_NUM_VLANS];
++} mt7530_defaults[] = {
++ {
++ .name = "llllw",
++ .pvids = { 1, 1, 1, 1, 2, 1, 1 },
++ .members = { 0, 0x6f, 0x50 },
++ .etags = { 0, 0x40, 0x40 },
++ .vids = { 0, 1, 2 },
++ }, {
++ .name = "wllll",
++ .pvids = { 2, 1, 1, 1, 1, 1, 1 },
++ .members = { 0, 0x7e, 0x41 },
++ .etags = { 0, 0x40, 0x40 },
++ .vids = { 0, 1, 2 },
++ },
++};
++
++struct mt7530_mapping*
++mt7530_find_mapping(struct device_node *np)
++{
++ const char *map;
++ int i;
++
++ if (of_property_read_string(np, "ralink,port-map", &map))
++ return NULL;
++
++ for (i = 0; i < ARRAY_SIZE(mt7530_defaults); i++)
++ if (!strcmp(map, mt7530_defaults[i].name))
++ return &mt7530_defaults[i];
++
++ return NULL;
++}
++
++static void
++mt7530_apply_mapping(struct mt7530_priv *mt7530, struct mt7530_mapping *map)
++{
++ int i = 0;
++
++ mt7530->global_vlan_enable = 1;
++
++ for (i = 0; i < MT7530_NUM_PORTS; i++)
++ mt7530->port_entries[i].pvid = map->pvids[i];
++
++ for (i = 0; i < MT7530_NUM_VLANS; i++) {
++ mt7530->vlan_entries[i].member = map->members[i];
++ mt7530->vlan_entries[i].etags = map->etags[i];
++ mt7530->vlan_entries[i].vid = map->vids[i];
++ }
++}
++
++static int
++mt7530_reset_switch(struct switch_dev *dev)
++{
++ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
++ int i;
++
++ memset(priv->port_entries, 0, sizeof(priv->port_entries));
++ memset(priv->vlan_entries, 0, sizeof(priv->vlan_entries));
++
++ /* set default vid of each vlan to the same number of vlan, so the vid
++ * won't need be set explicitly.
++ */
++ for (i = 0; i < MT7530_NUM_VLANS; i++) {
++ priv->vlan_entries[i].vid = i;
++ }
++
++ return 0;
++}
++
++static int
++mt7530_get_vlan_enable(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
++
++ val->value.i = priv->global_vlan_enable;
++
++ return 0;
++}
++
++static int
++mt7530_set_vlan_enable(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
++
++ priv->global_vlan_enable = val->value.i != 0;
++
++ return 0;
++}
++
++static u32
++mt7530_r32(struct mt7530_priv *priv, u32 reg)
++{
++ u32 val;
++ if (priv->bus) {
++ u16 high, low;
++
++ mdiobus_write(priv->bus, 0x1f, 0x1f, (reg >> 6) & 0x3ff);
++ low = mdiobus_read(priv->bus, 0x1f, (reg >> 2) & 0xf);
++ high = mdiobus_read(priv->bus, 0x1f, 0x10);
++
++ return (high << 16) | (low & 0xffff);
++ }
++
++ val = ioread32(priv->base + reg);
++ pr_debug("MT7530 MDIO Read [%04x]=%08x\n", reg, val);
++
++ return val;
++}
++
++static void
++mt7530_w32(struct mt7530_priv *priv, u32 reg, u32 val)
++{
++ if (priv->bus) {
++ mdiobus_write(priv->bus, 0x1f, 0x1f, (reg >> 6) & 0x3ff);
++ mdiobus_write(priv->bus, 0x1f, (reg >> 2) & 0xf, val & 0xffff);
++ mdiobus_write(priv->bus, 0x1f, 0x10, val >> 16);
++ return;
++ }
++
++ pr_debug("MT7530 MDIO Write[%04x]=%08x\n", reg, val);
++ iowrite32(val, priv->base + reg);
++}
++
++static void
++mt7530_vtcr(struct mt7530_priv *priv, u32 cmd, u32 val)
++{
++ int i;
++
++ mt7530_w32(priv, REG_ESW_VLAN_VTCR, BIT(31) | (cmd << 12) | val);
++
++ for (i = 0; i < 20; i++) {
++ u32 val = mt7530_r32(priv, REG_ESW_VLAN_VTCR);
++
++ if ((val & BIT(31)) == 0)
++ break;
++
++ udelay(1000);
++ }
++ if (i == 20)
++ printk("mt7530: vtcr timeout\n");
++}
++
++static int
++mt7530_get_port_pvid(struct switch_dev *dev, int port, int *val)
++{
++ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
++
++ if (port >= MT7530_NUM_PORTS)
++ return -EINVAL;
++
++ *val = mt7530_r32(priv, REG_ESW_PORT_PPBV1(port));
++ *val &= 0xfff;
++
++ return 0;
++}
++
++static int
++mt7530_set_port_pvid(struct switch_dev *dev, int port, int pvid)
++{
++ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
++
++ if (port >= MT7530_NUM_PORTS)
++ return -EINVAL;
++
++ if (pvid < MT7530_MIN_VID || pvid > MT7530_MAX_VID)
++ return -EINVAL;
++
++ priv->port_entries[port].pvid = pvid;
++
++ return 0;
++}
++
++static int
++mt7530_get_vlan_ports(struct switch_dev *dev, struct switch_val *val)
++{
++ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
++ u32 member;
++ u32 etags;
++ int i;
++
++ val->len = 0;
++
++ if (val->port_vlan < 0 || val->port_vlan >= MT7530_NUM_VLANS)
++ return -EINVAL;
++
++ mt7530_vtcr(priv, 0, val->port_vlan);
++
++ member = mt7530_r32(priv, REG_ESW_VLAN_VAWD1);
++ member >>= 16;
++ member &= 0xff;
++
++ etags = mt7530_r32(priv, REG_ESW_VLAN_VAWD2);
++
++ for (i = 0; i < MT7530_NUM_PORTS; i++) {
++ struct switch_port *p;
++ int etag;
++
++ if (!(member & BIT(i)))
++ continue;
++
++ p = &val->value.ports[val->len++];
++ p->id = i;
++
++ etag = (etags >> (i * 2)) & 0x3;
++
++ if (etag == ETAG_CTRL_TAG)
++ p->flags |= BIT(SWITCH_PORT_FLAG_TAGGED);
++ else if (etag != ETAG_CTRL_UNTAG)
++ printk("vlan egress tag control neither untag nor tag.\n");
++ }
++
++ return 0;
++}
++
++static int
++mt7530_set_vlan_ports(struct switch_dev *dev, struct switch_val *val)
++{
++ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
++ u8 member = 0;
++ u8 etags = 0;
++ int i;
++
++ if (val->port_vlan < 0 || val->port_vlan >= MT7530_NUM_VLANS ||
++ val->len > MT7530_NUM_PORTS)
++ return -EINVAL;
++
++ for (i = 0; i < val->len; i++) {
++ struct switch_port *p = &val->value.ports[i];
++
++ if (p->id >= MT7530_NUM_PORTS)
++ return -EINVAL;
++
++ member |= BIT(p->id);
++
++ if (p->flags & BIT(SWITCH_PORT_FLAG_TAGGED))
++ etags |= BIT(p->id);
++ }
++ priv->vlan_entries[val->port_vlan].member = member;
++ priv->vlan_entries[val->port_vlan].etags = etags;
++
++ return 0;
++}
++
++static int
++mt7530_set_vid(struct switch_dev *dev, const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
++ int vlan;
++ u16 vid;
++
++ vlan = val->port_vlan;
++ vid = (u16)val->value.i;
++
++ if (vlan < 0 || vlan >= MT7530_NUM_VLANS)
++ return -EINVAL;
++
++ if (vid < MT7530_MIN_VID || vid > MT7530_MAX_VID)
++ return -EINVAL;
++
++ priv->vlan_entries[vlan].vid = vid;
++ return 0;
++}
++
++static int
++mt7530_get_vid(struct switch_dev *dev, const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
++ u32 vid;
++ int vlan;
++
++ vlan = val->port_vlan;
++
++ vid = mt7530_r32(priv, REG_ESW_VLAN_VTIM(vlan));
++ if (vlan & 1)
++ vid = vid >> 12;
++ vid &= 0xfff;
++
++ val->value.i = vid;
++ return 0;
++}
++
++static int
++mt7530_apply_config(struct switch_dev *dev)
++{
++ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
++ int i, j;
++
++ if (!priv->global_vlan_enable) {
++ for (i = 0; i < MT7530_NUM_PORTS; i++)
++ mt7530_w32(priv, REG_ESW_PORT_PCR(i), 0x00ff0000);
++
++ for (i = 0; i < MT7530_NUM_PORTS; i++)
++ mt7530_w32(priv, REG_ESW_PORT_PVC(i), 0x8100000c);
++
++ return 0;
++ }
++
++ /* set all ports as security mode */
++ for (i = 0; i < MT7530_NUM_PORTS; i++)
++ mt7530_w32(priv, REG_ESW_PORT_PCR(i), 0x00ff0003);
++
++ /* set all ports as user port */
++ for (i = 0; i < MT7530_NUM_PORTS; i++)
++ mt7530_w32(priv, REG_ESW_PORT_PVC(i), 0x81000000);
++
++ for (i = 0; i < MT7530_NUM_VLANS; i++) {
++ u16 vid = priv->vlan_entries[i].vid;
++ u8 member = priv->vlan_entries[i].member;
++ u8 etags = priv->vlan_entries[i].etags;
++ u32 val;
++
++ /* vid of vlan */
++ val = mt7530_r32(priv, REG_ESW_VLAN_VTIM(i));
++ if (i % 2 == 0) {
++ val &= 0xfff000;
++ val |= vid;
++ } else {
++ val &= 0xfff;
++ val |= (vid << 12);
++ }
++ mt7530_w32(priv, REG_ESW_VLAN_VTIM(i), val);
++
++ /* vlan port membership */
++ if (member)
++ mt7530_w32(priv, REG_ESW_VLAN_VAWD1, REG_ESW_VLAN_VAWD1_IVL_MAC |
++ REG_ESW_VLAN_VAWD1_VTAG_EN | (member << 16) |
++ REG_ESW_VLAN_VAWD1_VALID);
++ else
++ mt7530_w32(priv, REG_ESW_VLAN_VAWD1, 0);
++
++ /* egress mode */
++ val = 0;
++ for (j = 0; j < MT7530_NUM_PORTS; j++) {
++ if (etags & BIT(j))
++ val |= ETAG_CTRL_TAG << (j * 2);
++ else
++ val |= ETAG_CTRL_UNTAG << (j * 2);
++ }
++ mt7530_w32(priv, REG_ESW_VLAN_VAWD2, val);
++
++ /* write to vlan table */
++ mt7530_vtcr(priv, 1, i);
++ }
++
++ /* Port Default PVID */
++ for (i = 0; i < MT7530_NUM_PORTS; i++) {
++ u32 val;
++ val = mt7530_r32(priv, REG_ESW_PORT_PPBV1(i));
++ val &= ~0xfff;
++ val |= priv->port_entries[i].pvid;
++ mt7530_w32(priv, REG_ESW_PORT_PPBV1(i), val);
++ }
++
++ return 0;
++}
++
++static int
++mt7530_get_port_link(struct switch_dev *dev, int port,
++ struct switch_port_link *link)
++{
++ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
++ u32 speed, pmsr;
++
++ if (port < 0 || port >= MT7530_NUM_PORTS)
++ return -EINVAL;
++
++ pmsr = mt7530_r32(priv, 0x3008 + (0x100 * port));
++
++ link->link = pmsr & 1;
++ link->duplex = (pmsr >> 1) & 1;
++ speed = (pmsr >> 2) & 3;
++
++ switch (speed) {
++ case 0:
++ link->speed = SWITCH_PORT_SPEED_10;
++ break;
++ case 1:
++ link->speed = SWITCH_PORT_SPEED_100;
++ break;
++ case 2:
++ case 3: /* forced gige speed can be 2 or 3 */
++ link->speed = SWITCH_PORT_SPEED_1000;
++ break;
++ default:
++ link->speed = SWITCH_PORT_SPEED_UNKNOWN;
++ break;
++ }
++
++ return 0;
++}
++
++static const struct switch_attr mt7530_global[] = {
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "enable_vlan",
++ .description = "VLAN mode (1:enabled)",
++ .max = 1,
++ .id = MT7530_ATTR_ENABLE_VLAN,
++ .get = mt7530_get_vlan_enable,
++ .set = mt7530_set_vlan_enable,
++ },
++};
++
++static const struct switch_attr mt7530_port[] = {
++};
++
++static const struct switch_attr mt7530_vlan[] = {
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "vid",
++ .description = "VLAN ID (0-4094)",
++ .set = mt7530_set_vid,
++ .get = mt7530_get_vid,
++ .max = 4094,
++ },
++};
++
++static const struct switch_dev_ops mt7530_ops = {
++ .attr_global = {
++ .attr = mt7530_global,
++ .n_attr = ARRAY_SIZE(mt7530_global),
++ },
++ .attr_port = {
++ .attr = mt7530_port,
++ .n_attr = ARRAY_SIZE(mt7530_port),
++ },
++ .attr_vlan = {
++ .attr = mt7530_vlan,
++ .n_attr = ARRAY_SIZE(mt7530_vlan),
++ },
++ .get_vlan_ports = mt7530_get_vlan_ports,
++ .set_vlan_ports = mt7530_set_vlan_ports,
++ .get_port_pvid = mt7530_get_port_pvid,
++ .set_port_pvid = mt7530_set_port_pvid,
++ .get_port_link = mt7530_get_port_link,
++ .apply_config = mt7530_apply_config,
++ .reset_switch = mt7530_reset_switch,
++};
++
++int
++mt7530_probe(struct device *dev, void __iomem *base, struct mii_bus *bus)
++{
++ struct switch_dev *swdev;
++ struct mt7530_priv *mt7530;
++ struct mt7530_mapping *map;
++ int ret;
++
++ if (bus && bus->phy_map[0x1f]->phy_id != 0x1beef)
++ return 0;
++
++ mt7530 = devm_kzalloc(dev, sizeof(struct mt7530_priv), GFP_KERNEL);
++ if (!mt7530)
++ return -ENOMEM;
++
++ mt7530->base = base;
++ mt7530->bus = bus;
++ mt7530->global_vlan_enable = 1;
++
++ swdev = &mt7530->swdev;
++ swdev->name = "mt7530";
++ swdev->alias = "mt7530";
++ swdev->cpu_port = MT7530_CPU_PORT;
++ swdev->ports = MT7530_NUM_PORTS;
++ swdev->vlans = MT7530_NUM_VLANS;
++ swdev->ops = &mt7530_ops;
++
++ ret = register_switch(swdev, NULL);
++ if (ret) {
++ dev_err(dev, "failed to register mt7530\n");
++ return ret;
++ }
++
++ dev_info(dev, "loaded mt7530 driver\n");
++
++ map = mt7530_find_mapping(dev->of_node);
++ if (map)
++ mt7530_apply_mapping(mt7530, map);
++ mt7530_apply_config(swdev);
++
++ return 0;
++}
+diff --git a/drivers/net/ethernet/ralink/mt7530.h b/drivers/net/ethernet/ralink/mt7530.h
+new file mode 100644
+index 0000000..169b888
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/mt7530.h
+@@ -0,0 +1,20 @@
++/*
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
++ */
++
++#ifndef _MT7530_H__
++#define _MT7530_H__
++
++int mt7530_probe(struct device *dev, void __iomem *base, struct mii_bus *bus);
++
++#endif
+diff --git a/drivers/net/ethernet/ralink/ralink_soc_eth.c b/drivers/net/ethernet/ralink/ralink_soc_eth.c
+new file mode 100644
+index 0000000..f3abab7
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/ralink_soc_eth.c
+@@ -0,0 +1,844 @@
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; version 2 of the License
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ * Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/dma-mapping.h>
++#include <linux/init.h>
++#include <linux/skbuff.h>
++#include <linux/etherdevice.h>
++#include <linux/ethtool.h>
++#include <linux/platform_device.h>
++#include <linux/of_device.h>
++#include <linux/clk.h>
++#include <linux/of_net.h>
++#include <linux/of_mdio.h>
++#include <linux/if_vlan.h>
++#include <linux/reset.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#include "ralink_soc_eth.h"
++#include "esw_rt3052.h"
++#include "mdio.h"
++
++#define TX_TIMEOUT (2 * HZ)
++#define MAX_RX_LENGTH 1536
++#define DMA_DUMMY_DESC 0xffffffff
++
++static const u32 fe_reg_table_default[FE_REG_COUNT] = {
++ [FE_REG_PDMA_GLO_CFG] = FE_PDMA_GLO_CFG,
++ [FE_REG_PDMA_RST_CFG] = FE_PDMA_RST_CFG,
++ [FE_REG_DLY_INT_CFG] = FE_DLY_INT_CFG,
++ [FE_REG_TX_BASE_PTR0] = FE_TX_BASE_PTR0,
++ [FE_REG_TX_MAX_CNT0] = FE_TX_MAX_CNT0,
++ [FE_REG_TX_CTX_IDX0] = FE_TX_CTX_IDX0,
++ [FE_REG_RX_BASE_PTR0] = FE_RX_BASE_PTR0,
++ [FE_REG_RX_MAX_CNT0] = FE_RX_MAX_CNT0,
++ [FE_REG_RX_CALC_IDX0] = FE_RX_CALC_IDX0,
++ [FE_REG_FE_INT_ENABLE] = FE_FE_INT_ENABLE,
++ [FE_REG_FE_INT_STATUS] = FE_FE_INT_STATUS,
++};
++
++static const u32 *fe_reg_table = fe_reg_table_default;
++
++static void __iomem *fe_base = 0;
++
++void fe_w32(u32 val, unsigned reg)
++{
++ __raw_writel(val, fe_base + reg);
++}
++
++u32 fe_r32(unsigned reg)
++{
++ return __raw_readl(fe_base + reg);
++}
++
++static inline void fe_reg_w32(u32 val, enum fe_reg reg)
++{
++ fe_w32(val, fe_reg_table[reg]);
++}
++
++static inline u32 fe_reg_r32(enum fe_reg reg)
++{
++ return fe_r32(fe_reg_table[reg]);
++}
++
++static inline void fe_int_disable(u32 mask)
++{
++ fe_reg_w32(fe_reg_r32(FE_REG_FE_INT_ENABLE) & ~mask,
++ FE_REG_FE_INT_ENABLE);
++ /* flush write */
++ fe_reg_r32(FE_REG_FE_INT_ENABLE);
++}
++
++static inline void fe_int_enable(u32 mask)
++{
++ fe_reg_w32(fe_reg_r32(FE_REG_FE_INT_ENABLE) | mask,
++ FE_REG_FE_INT_ENABLE);
++ /* flush write */
++ fe_reg_r32(FE_REG_FE_INT_ENABLE);
++}
++
++static inline void fe_hw_set_macaddr(struct fe_priv *priv, unsigned char *mac)
++{
++ unsigned long flags;
++
++ spin_lock_irqsave(&priv->page_lock, flags);
++ fe_w32((mac[0] << 8) | mac[1], FE_GDMA1_MAC_ADRH);
++ fe_w32((mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5],
++ FE_GDMA1_MAC_ADRL);
++ spin_unlock_irqrestore(&priv->page_lock, flags);
++}
++
++static int fe_set_mac_address(struct net_device *dev, void *p)
++{
++ int ret = eth_mac_addr(dev, p);
++
++ if (!ret) {
++ struct fe_priv *priv = netdev_priv(dev);
++
++ if (priv->soc->set_mac)
++ priv->soc->set_mac(priv, dev->dev_addr);
++ else
++ fe_hw_set_macaddr(priv, p);
++ }
++
++ return ret;
++}
++
++static struct sk_buff* fe_alloc_skb(struct fe_priv *priv)
++{
++ struct sk_buff *skb;
++
++ skb = netdev_alloc_skb(priv->netdev, MAX_RX_LENGTH + NET_IP_ALIGN);
++ if (!skb)
++ return NULL;
++
++ skb_reserve(skb, NET_IP_ALIGN);
++
++ return skb;
++}
++
++static int fe_alloc_rx(struct fe_priv *priv)
++{
++ int size = NUM_DMA_DESC * sizeof(struct fe_rx_dma);
++ int i;
++
++ priv->rx_dma = dma_alloc_coherent(&priv->netdev->dev, size,
++ &priv->rx_phys, GFP_ATOMIC);
++ if (!priv->rx_dma)
++ return -ENOMEM;
++
++ memset(priv->rx_dma, 0, size);
++
++ for (i = 0; i < NUM_DMA_DESC; i++) {
++ priv->rx_skb[i] = fe_alloc_skb(priv);
++ if (!priv->rx_skb[i])
++ return -ENOMEM;
++ }
++
++ for (i = 0; i < NUM_DMA_DESC; i++) {
++ dma_addr_t dma_addr = dma_map_single(&priv->netdev->dev,
++ priv->rx_skb[i]->data,
++ MAX_RX_LENGTH,
++ DMA_FROM_DEVICE);
++ priv->rx_dma[i].rxd1 = (unsigned int) dma_addr;
++
++ if (priv->soc->rx_dma)
++ priv->soc->rx_dma(priv, i, MAX_RX_LENGTH);
++ else
++ priv->rx_dma[i].rxd2 = RX_DMA_LSO;
++ }
++ wmb();
++
++ fe_reg_w32(priv->rx_phys, FE_REG_RX_BASE_PTR0);
++ fe_reg_w32(NUM_DMA_DESC, FE_REG_RX_MAX_CNT0);
++ fe_reg_w32((NUM_DMA_DESC - 1), FE_REG_RX_CALC_IDX0);
++ fe_reg_w32(FE_PST_DRX_IDX0, FE_REG_PDMA_RST_CFG);
++
++ return 0;
++}
++
++static int fe_alloc_tx(struct fe_priv *priv)
++{
++ int size = NUM_DMA_DESC * sizeof(struct fe_tx_dma);
++ int i;
++
++ priv->tx_free_idx = 0;
++
++ priv->tx_dma = dma_alloc_coherent(&priv->netdev->dev, size,
++ &priv->tx_phys, GFP_ATOMIC);
++ if (!priv->tx_dma)
++ return -ENOMEM;
++
++ memset(priv->tx_dma, 0, size);
++
++ for (i = 0; i < NUM_DMA_DESC; i++) {
++ if (priv->soc->tx_dma) {
++ priv->soc->tx_dma(priv, i, NULL);
++ continue;
++ }
++
++ priv->tx_dma[i].txd2 = TX_DMA_LSO | TX_DMA_DONE;
++ priv->tx_dma[i].txd4 = TX_DMA_QN(3) | TX_DMA_PN(1);
++ }
++
++ fe_reg_w32(priv->tx_phys, FE_REG_TX_BASE_PTR0);
++ fe_reg_w32(NUM_DMA_DESC, FE_REG_TX_MAX_CNT0);
++ fe_reg_w32(0, FE_REG_TX_CTX_IDX0);
++ fe_reg_w32(FE_PST_DTX_IDX0, FE_REG_PDMA_RST_CFG);
++
++ return 0;
++}
++
++static void fe_free_dma(struct fe_priv *priv)
++{
++ int i;
++
++ for (i = 0; i < NUM_DMA_DESC; i++) {
++ if (priv->rx_skb[i]) {
++ dma_unmap_single(&priv->netdev->dev, priv->rx_dma[i].rxd1,
++ MAX_RX_LENGTH, DMA_FROM_DEVICE);
++ dev_kfree_skb_any(priv->rx_skb[i]);
++ priv->rx_skb[i] = NULL;
++ }
++
++ if (priv->tx_skb[i]) {
++ dev_kfree_skb_any(priv->tx_skb[i]);
++ priv->tx_skb[i] = NULL;
++ }
++ }
++
++ if (priv->rx_dma) {
++ int size = NUM_DMA_DESC * sizeof(struct fe_rx_dma);
++ dma_free_coherent(&priv->netdev->dev, size, priv->rx_dma,
++ priv->rx_phys);
++ }
++
++ if (priv->tx_dma) {
++ int size = NUM_DMA_DESC * sizeof(struct fe_tx_dma);
++ dma_free_coherent(&priv->netdev->dev, size, priv->tx_dma,
++ priv->tx_phys);
++ }
++
++ netdev_reset_queue(priv->netdev);
++}
++
++static void fe_start_tso(struct sk_buff *skb, struct net_device *dev, unsigned int nr_frags, int idx)
++{
++ struct fe_priv *priv = netdev_priv(dev);
++ struct skb_frag_struct *frag;
++ int i;
++
++ for (i = 0; i < nr_frags; i++) {
++ dma_addr_t mapped_addr;
++
++ frag = &skb_shinfo(skb)->frags[i];
++ mapped_addr = skb_frag_dma_map(&dev->dev, frag, 0, skb_frag_size(frag), DMA_TO_DEVICE);
++ if (i % 2) {
++ idx = (idx + 1) % NUM_DMA_DESC;
++ priv->tx_dma[idx].txd1 = mapped_addr;
++ if (i == nr_frags - 1)
++ priv->tx_dma[idx].txd2 = TX_DMA_LSO | TX_DMA_PLEN0(frag->size);
++ else
++ priv->tx_dma[idx].txd2 = TX_DMA_PLEN0(frag->size);
++ } else {
++ priv->tx_dma[idx].txd3 = mapped_addr;
++ if (i == nr_frags - 1)
++ priv->tx_dma[idx].txd2 |= TX_DMA_LS1 | TX_DMA_PLEN1(frag->size);
++ else
++ priv->tx_dma[idx].txd2 |= TX_DMA_PLEN1(frag->size);
++ }
++ }
++}
++
++static int fe_start_xmit(struct sk_buff *skb, struct net_device *dev)
++{
++ unsigned int nr_frags = skb_shinfo(skb)->nr_frags;
++ struct fe_priv *priv = netdev_priv(dev);
++ dma_addr_t mapped_addr;
++ u32 tx_next, tx, tx_num = 1;
++ int i;
++
++ if (priv->soc->min_pkt_len) {
++ if (skb->len < priv->soc->min_pkt_len) {
++ if (skb_padto(skb, priv->soc->min_pkt_len)) {
++ printk(KERN_ERR
++ "fe_eth: skb_padto failed\n");
++ kfree_skb(skb);
++ return 0;
++ }
++ skb_put(skb, priv->soc->min_pkt_len - skb->len);
++ }
++ }
++
++ dev->trans_start = jiffies;
++ mapped_addr = dma_map_single(&priv->netdev->dev, skb->data,
++ skb->len, DMA_TO_DEVICE);
++
++ spin_lock(&priv->page_lock);
++
++ tx = fe_reg_r32(FE_REG_TX_CTX_IDX0);
++ if (priv->soc->tso && nr_frags)
++ tx_num += nr_frags >> 1;
++ tx_next = (tx + tx_num) % NUM_DMA_DESC;
++ if ((priv->tx_skb[tx]) || (priv->tx_skb[tx_next]) ||
++ !(priv->tx_dma[tx].txd2 & TX_DMA_DONE) ||
++ !(priv->tx_dma[tx_next].txd2 & TX_DMA_DONE))
++ {
++ spin_unlock(&priv->page_lock);
++ dev->stats.tx_dropped++;
++ kfree_skb(skb);
++
++ return NETDEV_TX_OK;
++ }
++
++ if (priv->soc->tso) {
++ int t = tx_num;
++
++ priv->tx_skb[(tx + t - 1) % NUM_DMA_DESC] = skb;
++ while (--t)
++ priv->tx_skb[(tx + t - 1) % NUM_DMA_DESC] = (struct sk_buff *) DMA_DUMMY_DESC;
++ } else {
++ priv->tx_skb[tx] = skb;
++ }
++ priv->tx_dma[tx].txd1 = (unsigned int) mapped_addr;
++ wmb();
++
++ priv->tx_dma[tx].txd4 &= ~0x80;
++ if (priv->soc->tx_dma)
++ priv->soc->tx_dma(priv, tx, skb);
++ else
++ priv->tx_dma[tx].txd2 = TX_DMA_LSO | TX_DMA_PLEN0(skb->len);
++
++ if (skb->ip_summed == CHECKSUM_PARTIAL)
++ priv->tx_dma[tx].txd4 |= TX_DMA_CHKSUM;
++ else
++ priv->tx_dma[tx].txd4 &= ~TX_DMA_CHKSUM;
++
++ if (priv->soc->tso)
++ fe_start_tso(skb, dev, nr_frags, tx);
++
++ if (priv->soc->tso && (skb_shinfo(skb)->gso_segs > 1)) {
++ struct iphdr *iph = NULL;
++ struct tcphdr *th = NULL;
++ struct ipv6hdr *ip6h = NULL;
++
++ ip6h = (struct ipv6hdr *) skb_network_header(skb);
++ iph = (struct iphdr *) skb_network_header(skb);
++ if ((iph->version == 4) && (iph->protocol == IPPROTO_TCP)) {
++ th = (struct tcphdr *)skb_transport_header(skb);
++ priv->tx_dma[tx].txd4 |= BIT(28);
++ th->check = htons(skb_shinfo(skb)->gso_size);
++ dma_cache_sync(NULL, th, sizeof(struct tcphdr), DMA_TO_DEVICE);
++ } else if ((ip6h->version == 6) && (ip6h->nexthdr == NEXTHDR_TCP)) {
++ th = (struct tcphdr *)skb_transport_header(skb);
++ priv->tx_dma[tx].txd4 |= BIT(28);
++ th->check = htons(skb_shinfo(skb)->gso_size);
++ dma_cache_sync(NULL, th, sizeof(struct tcphdr), DMA_TO_DEVICE);
++ }
++ }
++
++ for (i = 0; i < tx_num; i++)
++ dma_cache_sync(NULL, &priv->tx_dma[tx + i], sizeof(struct fe_tx_dma), DMA_TO_DEVICE);
++
++ dev->stats.tx_packets++;
++ dev->stats.tx_bytes += skb->len;
++
++ wmb();
++ fe_reg_w32(tx_next, FE_REG_TX_CTX_IDX0);
++ netdev_sent_queue(dev, skb->len);
++
++ spin_unlock(&priv->page_lock);
++
++ return NETDEV_TX_OK;
++}
++
++static int fe_poll_rx(struct napi_struct *napi, int budget)
++{
++ struct fe_priv *priv = container_of(napi, struct fe_priv, rx_napi);
++ int idx = fe_reg_r32(FE_REG_RX_CALC_IDX0);
++ int complete = 0;
++ int rx = 0;
++
++ while ((rx < budget) && !complete) {
++ idx = (idx + 1) % NUM_DMA_DESC;
++
++ if (priv->rx_dma[idx].rxd2 & RX_DMA_DONE) {
++ struct sk_buff *new_skb = fe_alloc_skb(priv);
++
++ if (new_skb) {
++ int pktlen = RX_DMA_PLEN0(priv->rx_dma[idx].rxd2);
++ dma_addr_t dma_addr;
++
++ dma_unmap_single(&priv->netdev->dev, priv->rx_dma[idx].rxd1,
++ MAX_RX_LENGTH, DMA_FROM_DEVICE);
++
++ skb_put(priv->rx_skb[idx], pktlen);
++ priv->rx_skb[idx]->dev = priv->netdev;
++ priv->rx_skb[idx]->protocol = eth_type_trans(priv->rx_skb[idx], priv->netdev);
++ if (priv->rx_dma[idx].rxd4 & priv->soc->checksum_bit)
++ priv->rx_skb[idx]->ip_summed = CHECKSUM_UNNECESSARY;
++ else
++ priv->rx_skb[idx]->ip_summed = CHECKSUM_NONE;
++ priv->netdev->stats.rx_packets++;
++ priv->netdev->stats.rx_bytes += pktlen;
++
++#ifdef CONFIG_INET_LRO
++ if (priv->soc->get_skb_header && priv->rx_skb[idx]->ip_summed == CHECKSUM_UNNECESSARY)
++ lro_receive_skb(&priv->lro_mgr, priv->rx_skb[idx], NULL);
++ else
++#endif
++ netif_receive_skb(priv->rx_skb[idx]);
++
++ priv->rx_skb[idx] = new_skb;
++
++ dma_addr = dma_map_single(&priv->netdev->dev,
++ new_skb->data,
++ MAX_RX_LENGTH,
++ DMA_FROM_DEVICE);
++ priv->rx_dma[idx].rxd1 = (unsigned int) dma_addr;
++ wmb();
++ } else {
++ priv->netdev->stats.rx_dropped++;
++ }
++
++ if (priv->soc->rx_dma)
++ priv->soc->rx_dma(priv, idx, MAX_RX_LENGTH);
++ else
++ priv->rx_dma[idx].rxd2 = RX_DMA_LSO;
++ fe_reg_w32(idx, FE_REG_RX_CALC_IDX0);
++
++ rx++;
++ } else {
++ complete = 1;
++ }
++ }
++
++#ifdef CONFIG_INET_LRO
++ if (priv->soc->get_skb_header)
++ lro_flush_all(&priv->lro_mgr);
++#endif
++ if (complete) {
++ napi_complete(&priv->rx_napi);
++ fe_int_enable(priv->soc->rx_dly_int);
++ }
++
++ return rx;
++}
++
++static void fe_tx_housekeeping(unsigned long ptr)
++{
++ struct net_device *dev = (struct net_device*)ptr;
++ struct fe_priv *priv = netdev_priv(dev);
++ unsigned int bytes_compl = 0;
++ unsigned int pkts_compl = 0;
++
++ spin_lock(&priv->page_lock);
++ while (1) {
++ struct fe_tx_dma *txd;
++
++ txd = &priv->tx_dma[priv->tx_free_idx];
++
++ if (!(txd->txd2 & TX_DMA_DONE) || !(priv->tx_skb[priv->tx_free_idx]))
++ break;
++
++ if (priv->tx_skb[priv->tx_free_idx] != (struct sk_buff *) DMA_DUMMY_DESC) {
++ bytes_compl += priv->tx_skb[priv->tx_free_idx]->len;
++ dev_kfree_skb_irq(priv->tx_skb[priv->tx_free_idx]);
++ }
++ pkts_compl++;
++ priv->tx_skb[priv->tx_free_idx] = NULL;
++ priv->tx_free_idx++;
++ if (priv->tx_free_idx >= NUM_DMA_DESC)
++ priv->tx_free_idx = 0;
++ }
++
++ netdev_completed_queue(priv->netdev, pkts_compl, bytes_compl);
++ spin_unlock(&priv->page_lock);
++
++ fe_int_enable(priv->soc->tx_dly_int);
++}
++
++static void fe_tx_timeout(struct net_device *dev)
++{
++ struct fe_priv *priv = netdev_priv(dev);
++
++ tasklet_schedule(&priv->tx_tasklet);
++ priv->netdev->stats.tx_errors++;
++ netdev_err(dev, "transmit timed out, waking up the queue\n");
++ netif_wake_queue(dev);
++}
++
++static irqreturn_t fe_handle_irq(int irq, void *dev)
++{
++ struct fe_priv *priv = netdev_priv(dev);
++ unsigned int status;
++ unsigned int mask;
++
++ status = fe_reg_r32(FE_REG_FE_INT_STATUS);
++ mask = fe_reg_r32(FE_REG_FE_INT_ENABLE);
++
++ if (!(status & mask))
++ return IRQ_NONE;
++
++ if (status & priv->soc->rx_dly_int) {
++ fe_int_disable(priv->soc->rx_dly_int);
++ napi_schedule(&priv->rx_napi);
++ }
++
++ if (status & priv->soc->tx_dly_int) {
++ fe_int_disable(priv->soc->tx_dly_int);
++ tasklet_schedule(&priv->tx_tasklet);
++ }
++
++ fe_reg_w32(status, FE_REG_FE_INT_STATUS);
++
++ return IRQ_HANDLED;
++}
++
++static int fe_hw_init(struct net_device *dev)
++{
++ struct fe_priv *priv = netdev_priv(dev);
++ int err;
++
++ err = devm_request_irq(priv->device, dev->irq, fe_handle_irq, 0,
++ dev_name(priv->device), dev);
++ if (err)
++ return err;
++
++ err = fe_alloc_rx(priv);
++ if (!err)
++ err = fe_alloc_tx(priv);
++ if (err)
++ return err;
++
++ if (priv->soc->set_mac)
++ priv->soc->set_mac(priv, dev->dev_addr);
++ else
++ fe_hw_set_macaddr(priv, dev->dev_addr);
++
++ fe_reg_w32(FE_DELAY_INIT, FE_REG_DLY_INT_CFG);
++
++ fe_int_disable(priv->soc->tx_dly_int | priv->soc->rx_dly_int);
++
++ tasklet_init(&priv->tx_tasklet, fe_tx_housekeeping, (unsigned long)dev);
++
++ if (priv->soc->fwd_config) {
++ priv->soc->fwd_config(priv);
++ } else {
++ unsigned long sysclk = priv->sysclk;
++
++ if (!sysclk) {
++ netdev_err(dev, "unable to get clock\n");
++ return -EINVAL;
++ }
++
++ sysclk /= FE_US_CYC_CNT_DIVISOR;
++ sysclk <<= FE_US_CYC_CNT_SHIFT;
++
++ fe_w32((fe_r32(FE_FE_GLO_CFG) &
++ ~(FE_US_CYC_CNT_MASK << FE_US_CYC_CNT_SHIFT)) | sysclk,
++ FE_FE_GLO_CFG);
++
++ fe_w32(fe_r32(FE_GDMA1_FWD_CFG) & ~0xffff, FE_GDMA1_FWD_CFG);
++ fe_w32(fe_r32(FE_GDMA1_FWD_CFG) | (FE_GDM1_ICS_EN | FE_GDM1_TCS_EN | FE_GDM1_UCS_EN),
++ FE_GDMA1_FWD_CFG);
++ fe_w32(fe_r32(FE_CDMA_CSG_CFG) | (FE_ICS_GEN_EN | FE_TCS_GEN_EN | FE_UCS_GEN_EN),
++ FE_CDMA_CSG_CFG);
++ fe_w32(FE_PSE_FQFC_CFG_INIT, FE_PSE_FQ_CFG);
++ }
++
++ fe_w32(1, FE_FE_RST_GL);
++ fe_w32(0, FE_FE_RST_GL);
++
++ return 0;
++}
++
++static int fe_open(struct net_device *dev)
++{
++ struct fe_priv *priv = netdev_priv(dev);
++ unsigned long flags;
++ u32 val;
++
++ spin_lock_irqsave(&priv->page_lock, flags);
++ napi_enable(&priv->rx_napi);
++
++ val = FE_TX_WB_DDONE | FE_RX_DMA_EN | FE_TX_DMA_EN;
++ val |= priv->soc->pdma_glo_cfg;
++ fe_reg_w32(val, FE_REG_PDMA_GLO_CFG);
++
++ spin_unlock_irqrestore(&priv->page_lock, flags);
++
++ if (priv->phy)
++ priv->phy->start(priv);
++
++ if (priv->soc->has_carrier && priv->soc->has_carrier(priv))
++ netif_carrier_on(dev);
++
++ netif_start_queue(dev);
++ fe_int_enable(priv->soc->tx_dly_int | priv->soc->rx_dly_int);
++
++ return 0;
++}
++
++static int fe_stop(struct net_device *dev)
++{
++ struct fe_priv *priv = netdev_priv(dev);
++ unsigned long flags;
++
++ fe_int_disable(priv->soc->tx_dly_int | priv->soc->rx_dly_int);
++
++ netif_stop_queue(dev);
++
++ if (priv->phy)
++ priv->phy->stop(priv);
++
++ spin_lock_irqsave(&priv->page_lock, flags);
++ napi_disable(&priv->rx_napi);
++
++ fe_reg_w32(fe_reg_r32(FE_REG_PDMA_GLO_CFG) &
++ ~(FE_TX_WB_DDONE | FE_RX_DMA_EN | FE_TX_DMA_EN),
++ FE_REG_PDMA_GLO_CFG);
++ spin_unlock_irqrestore(&priv->page_lock, flags);
++
++ return 0;
++}
++
++static int __init fe_init(struct net_device *dev)
++{
++ struct fe_priv *priv = netdev_priv(dev);
++ struct device_node *port;
++ int err;
++
++ BUG_ON(!priv->soc->reset_fe);
++ priv->soc->reset_fe();
++
++ if (priv->soc->switch_init)
++ priv->soc->switch_init(priv);
++
++ memcpy(dev->dev_addr, priv->soc->mac, ETH_ALEN);
++ of_get_mac_address_mtd(priv->device->of_node, dev->dev_addr);
++
++ err = fe_mdio_init(priv);
++ if (err)
++ return err;
++
++ if (priv->phy) {
++ err = priv->phy->connect(priv);
++ if (err)
++ goto err_mdio_cleanup;
++ }
++
++ if (priv->soc->port_init)
++ for_each_child_of_node(priv->device->of_node, port)
++ if (of_device_is_compatible(port, "ralink,eth-port") && of_device_is_available(port))
++ priv->soc->port_init(priv, port);
++
++ err = fe_hw_init(dev);
++ if (err)
++ goto err_phy_disconnect;
++
++ if (priv->soc->switch_config)
++ priv->soc->switch_config(priv);
++
++ return 0;
++
++err_phy_disconnect:
++ if (priv->phy)
++ priv->phy->disconnect(priv);
++err_mdio_cleanup:
++ fe_mdio_cleanup(priv);
++
++ return err;
++}
++
++static void fe_uninit(struct net_device *dev)
++{
++ struct fe_priv *priv = netdev_priv(dev);
++
++ tasklet_kill(&priv->tx_tasklet);
++
++ if (priv->phy)
++ priv->phy->disconnect(priv);
++ fe_mdio_cleanup(priv);
++
++ fe_reg_w32(0, FE_REG_FE_INT_ENABLE);
++ free_irq(dev->irq, dev);
++
++ fe_free_dma(priv);
++}
++
++static const struct net_device_ops fe_netdev_ops = {
++ .ndo_init = fe_init,
++ .ndo_uninit = fe_uninit,
++ .ndo_open = fe_open,
++ .ndo_stop = fe_stop,
++ .ndo_start_xmit = fe_start_xmit,
++ .ndo_tx_timeout = fe_tx_timeout,
++ .ndo_set_mac_address = fe_set_mac_address,
++ .ndo_change_mtu = eth_change_mtu,
++ .ndo_validate_addr = eth_validate_addr,
++};
++
++static int fe_probe(struct platform_device *pdev)
++{
++ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ const struct of_device_id *match;
++ struct fe_soc_data *soc = NULL;
++ struct net_device *netdev;
++ struct fe_priv *priv;
++ struct clk *sysclk;
++ int err;
++
++ device_reset(&pdev->dev);
++
++ match = of_match_device(of_fe_match, &pdev->dev);
++ soc = (struct fe_soc_data *) match->data;
++
++ if (soc->init_data)
++ soc->init_data(soc);
++ if (soc->reg_table)
++ fe_reg_table = soc->reg_table;
++
++ fe_base = devm_request_and_ioremap(&pdev->dev, res);
++ if (!fe_base)
++ return -ENOMEM;
++
++ netdev = alloc_etherdev(sizeof(struct fe_priv));
++ if (!netdev) {
++ dev_err(&pdev->dev, "alloc_etherdev failed\n");
++ return -ENOMEM;
++ }
++
++ strcpy(netdev->name, "eth%d");
++ netdev->netdev_ops = &fe_netdev_ops;
++ netdev->base_addr = (unsigned long) fe_base;
++ netdev->watchdog_timeo = TX_TIMEOUT;
++ netdev->features |= NETIF_F_IP_CSUM | NETIF_F_RXCSUM;
++
++ if (fe_reg_table[FE_REG_FE_DMA_VID_BASE])
++ netdev->features |= NETIF_F_HW_VLAN_CTAG_TX;
++
++ if (soc->tso) {
++ dev_info(&pdev->dev, "Enabling TSO\n");
++ netdev->features |= NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_IPV6_CSUM;
++ }
++ netdev->hw_features = netdev->features;
++
++ netdev->irq = platform_get_irq(pdev, 0);
++ if (netdev->irq < 0) {
++ dev_err(&pdev->dev, "no IRQ resource found\n");
++ kfree(netdev);
++ return -ENXIO;
++ }
++
++ priv = netdev_priv(netdev);
++ memset(priv, 0, sizeof(struct fe_priv));
++ spin_lock_init(&priv->page_lock);
++
++ sysclk = devm_clk_get(&pdev->dev, NULL);
++ if (!IS_ERR(sysclk))
++ priv->sysclk = clk_get_rate(sysclk);
++
++ priv->netdev = netdev;
++ priv->device = &pdev->dev;
++ priv->soc = soc;
++
++ err = register_netdev(netdev);
++ if (err) {
++ dev_err(&pdev->dev, "error bringing up device\n");
++ kfree(netdev);
++ return err;
++ }
++ netif_napi_add(netdev, &priv->rx_napi, fe_poll_rx, 32);
++
++#ifdef CONFIG_INET_LRO
++ if (priv->soc->get_skb_header) {
++ priv->lro_mgr.dev = netdev;
++ memset(&priv->lro_mgr.stats, 0, sizeof(priv->lro_mgr.stats));
++ priv->lro_mgr.features = LRO_F_NAPI;
++ priv->lro_mgr.ip_summed = CHECKSUM_UNNECESSARY;
++ priv->lro_mgr.ip_summed_aggr = CHECKSUM_UNNECESSARY;
++ priv->lro_mgr.max_desc = ARRAY_SIZE(priv->lro_arr);
++ priv->lro_mgr.max_aggr = 64;
++ priv->lro_mgr.frag_align_pad = 0;
++ priv->lro_mgr.lro_arr = priv->lro_arr;
++ priv->lro_mgr.get_skb_header = priv->soc->get_skb_header;
++ }
++#endif
++
++ platform_set_drvdata(pdev, netdev);
++
++ netdev_info(netdev, "done loading\n");
++
++ return 0;
++}
++
++static int fe_remove(struct platform_device *pdev)
++{
++ struct net_device *dev = platform_get_drvdata(pdev);
++ struct fe_priv *priv = netdev_priv(dev);
++
++ netif_stop_queue(dev);
++ netif_napi_del(&priv->rx_napi);
++
++ unregister_netdev(dev);
++ free_netdev(dev);
++
++ return 0;
++}
++
++static struct platform_driver fe_driver = {
++ .probe = fe_probe,
++ .remove = fe_remove,
++ .driver = {
++ .name = "ralink_soc_eth",
++ .owner = THIS_MODULE,
++ .of_match_table = of_fe_match,
++ },
++};
++
++static int __init init_rtfe(void)
++{
++ int ret;
++
++ ret = rtesw_init();
++ if (ret)
++ return ret;
++
++ ret = platform_driver_register(&fe_driver);
++ if (ret)
++ rtesw_exit();
++
++ return ret;
++}
++
++static void __exit exit_rtfe(void)
++{
++ platform_driver_unregister(&fe_driver);
++ rtesw_exit();
++}
++
++module_init(init_rtfe);
++module_exit(exit_rtfe);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
++MODULE_DESCRIPTION("Ethernet driver for Ralink SoC");
+diff --git a/drivers/net/ethernet/ralink/ralink_soc_eth.h b/drivers/net/ethernet/ralink/ralink_soc_eth.h
+new file mode 100644
+index 0000000..ca16788
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/ralink_soc_eth.h
+@@ -0,0 +1,384 @@
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; version 2 of the License
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ * based on Ralink SDK3.3
++ * Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
++ */
++
++#ifndef FE_ETH_H
++#define FE_ETH_H
++
++#include <linux/mii.h>
++#include <linux/interrupt.h>
++#include <linux/netdevice.h>
++#include <linux/dma-mapping.h>
++#include <linux/phy.h>
++#include <linux/inet_lro.h>
++
++
++enum fe_reg {
++ FE_REG_PDMA_GLO_CFG = 0,
++ FE_REG_PDMA_RST_CFG,
++ FE_REG_DLY_INT_CFG,
++ FE_REG_TX_BASE_PTR0,
++ FE_REG_TX_MAX_CNT0,
++ FE_REG_TX_CTX_IDX0,
++ FE_REG_RX_BASE_PTR0,
++ FE_REG_RX_MAX_CNT0,
++ FE_REG_RX_CALC_IDX0,
++ FE_REG_FE_INT_ENABLE,
++ FE_REG_FE_INT_STATUS,
++ FE_REG_FE_DMA_VID_BASE,
++ FE_REG_COUNT
++};
++
++#define NUM_DMA_DESC 0x100
++
++#define FE_DELAY_EN_INT 0x80
++#define FE_DELAY_MAX_INT 0x04
++#define FE_DELAY_MAX_TOUT 0x04
++#define FE_DELAY_CHAN (((FE_DELAY_EN_INT | FE_DELAY_MAX_INT) << 8) | FE_DELAY_MAX_TOUT)
++#define FE_DELAY_INIT ((FE_DELAY_CHAN << 16) | FE_DELAY_CHAN)
++#define FE_PSE_FQFC_CFG_INIT 0x80504000
++
++/* interrupt bits */
++#define FE_CNT_PPE_AF BIT(31)
++#define FE_CNT_GDM_AF BIT(29)
++#define FE_PSE_P2_FC BIT(26)
++#define FE_PSE_BUF_DROP BIT(24)
++#define FE_GDM_OTHER_DROP BIT(23)
++#define FE_PSE_P1_FC BIT(22)
++#define FE_PSE_P0_FC BIT(21)
++#define FE_PSE_FQ_EMPTY BIT(20)
++#define FE_GE1_STA_CHG BIT(18)
++#define FE_TX_COHERENT BIT(17)
++#define FE_RX_COHERENT BIT(16)
++#define FE_TX_DONE_INT3 BIT(11)
++#define FE_TX_DONE_INT2 BIT(10)
++#define FE_TX_DONE_INT1 BIT(9)
++#define FE_TX_DONE_INT0 BIT(8)
++#define FE_RX_DONE_INT0 BIT(2)
++#define FE_TX_DLY_INT BIT(1)
++#define FE_RX_DLY_INT BIT(0)
++
++#define RT5350_RX_DLY_INT BIT(30)
++#define RT5350_TX_DLY_INT BIT(28)
++
++/* registers */
++#define FE_FE_OFFSET 0x0000
++#define FE_GDMA_OFFSET 0x0020
++#define FE_PSE_OFFSET 0x0040
++#define FE_GDMA2_OFFSET 0x0060
++#define FE_CDMA_OFFSET 0x0080
++#define FE_DMA_VID0 0x00a8
++#define FE_PDMA_OFFSET 0x0100
++#define FE_PPE_OFFSET 0x0200
++#define FE_CMTABLE_OFFSET 0x0400
++#define FE_POLICYTABLE_OFFSET 0x1000
++
++#define RT5350_PDMA_OFFSET 0x0800
++#define RT5350_SDM_OFFSET 0x0c00
++
++#define FE_MDIO_ACCESS (FE_FE_OFFSET + 0x00)
++#define FE_MDIO_CFG (FE_FE_OFFSET + 0x04)
++#define FE_FE_GLO_CFG (FE_FE_OFFSET + 0x08)
++#define FE_FE_RST_GL (FE_FE_OFFSET + 0x0C)
++#define FE_FE_INT_STATUS (FE_FE_OFFSET + 0x10)
++#define FE_FE_INT_ENABLE (FE_FE_OFFSET + 0x14)
++#define FE_MDIO_CFG2 (FE_FE_OFFSET + 0x18)
++#define FE_FOC_TS_T (FE_FE_OFFSET + 0x1C)
++
++#define FE_GDMA1_FWD_CFG (FE_GDMA_OFFSET + 0x00)
++#define FE_GDMA1_SCH_CFG (FE_GDMA_OFFSET + 0x04)
++#define FE_GDMA1_SHPR_CFG (FE_GDMA_OFFSET + 0x08)
++#define FE_GDMA1_MAC_ADRL (FE_GDMA_OFFSET + 0x0C)
++#define FE_GDMA1_MAC_ADRH (FE_GDMA_OFFSET + 0x10)
++
++#define FE_GDMA2_FWD_CFG (FE_GDMA2_OFFSET + 0x00)
++#define FE_GDMA2_SCH_CFG (FE_GDMA2_OFFSET + 0x04)
++#define FE_GDMA2_SHPR_CFG (FE_GDMA2_OFFSET + 0x08)
++#define FE_GDMA2_MAC_ADRL (FE_GDMA2_OFFSET + 0x0C)
++#define FE_GDMA2_MAC_ADRH (FE_GDMA2_OFFSET + 0x10)
++
++#define FE_PSE_FQ_CFG (FE_PSE_OFFSET + 0x00)
++#define FE_CDMA_FC_CFG (FE_PSE_OFFSET + 0x04)
++#define FE_GDMA1_FC_CFG (FE_PSE_OFFSET + 0x08)
++#define FE_GDMA2_FC_CFG (FE_PSE_OFFSET + 0x0C)
++
++#define FE_CDMA_CSG_CFG (FE_CDMA_OFFSET + 0x00)
++#define FE_CDMA_SCH_CFG (FE_CDMA_OFFSET + 0x04)
++
++#define MT7620A_GDMA_OFFSET 0x0600
++#define MT7620A_GDMA1_FWD_CFG (MT7620A_GDMA_OFFSET + 0x00)
++#define MT7620A_FE_GDMA1_SCH_CFG (MT7620A_GDMA_OFFSET + 0x04)
++#define MT7620A_FE_GDMA1_SHPR_CFG (MT7620A_GDMA_OFFSET + 0x08)
++#define MT7620A_FE_GDMA1_MAC_ADRL (MT7620A_GDMA_OFFSET + 0x0C)
++#define MT7620A_FE_GDMA1_MAC_ADRH (MT7620A_GDMA_OFFSET + 0x10)
++
++#define RT5350_TX_BASE_PTR0 (RT5350_PDMA_OFFSET + 0x00)
++#define RT5350_TX_MAX_CNT0 (RT5350_PDMA_OFFSET + 0x04)
++#define RT5350_TX_CTX_IDX0 (RT5350_PDMA_OFFSET + 0x08)
++#define RT5350_TX_DTX_IDX0 (RT5350_PDMA_OFFSET + 0x0C)
++#define RT5350_TX_BASE_PTR1 (RT5350_PDMA_OFFSET + 0x10)
++#define RT5350_TX_MAX_CNT1 (RT5350_PDMA_OFFSET + 0x14)
++#define RT5350_TX_CTX_IDX1 (RT5350_PDMA_OFFSET + 0x18)
++#define RT5350_TX_DTX_IDX1 (RT5350_PDMA_OFFSET + 0x1C)
++#define RT5350_TX_BASE_PTR2 (RT5350_PDMA_OFFSET + 0x20)
++#define RT5350_TX_MAX_CNT2 (RT5350_PDMA_OFFSET + 0x24)
++#define RT5350_TX_CTX_IDX2 (RT5350_PDMA_OFFSET + 0x28)
++#define RT5350_TX_DTX_IDX2 (RT5350_PDMA_OFFSET + 0x2C)
++#define RT5350_TX_BASE_PTR3 (RT5350_PDMA_OFFSET + 0x30)
++#define RT5350_TX_MAX_CNT3 (RT5350_PDMA_OFFSET + 0x34)
++#define RT5350_TX_CTX_IDX3 (RT5350_PDMA_OFFSET + 0x38)
++#define RT5350_TX_DTX_IDX3 (RT5350_PDMA_OFFSET + 0x3C)
++#define RT5350_RX_BASE_PTR0 (RT5350_PDMA_OFFSET + 0x100)
++#define RT5350_RX_MAX_CNT0 (RT5350_PDMA_OFFSET + 0x104)
++#define RT5350_RX_CALC_IDX0 (RT5350_PDMA_OFFSET + 0x108)
++#define RT5350_RX_DRX_IDX0 (RT5350_PDMA_OFFSET + 0x10C)
++#define RT5350_RX_BASE_PTR1 (RT5350_PDMA_OFFSET + 0x110)
++#define RT5350_RX_MAX_CNT1 (RT5350_PDMA_OFFSET + 0x114)
++#define RT5350_RX_CALC_IDX1 (RT5350_PDMA_OFFSET + 0x118)
++#define RT5350_RX_DRX_IDX1 (RT5350_PDMA_OFFSET + 0x11C)
++#define RT5350_PDMA_GLO_CFG (RT5350_PDMA_OFFSET + 0x204)
++#define RT5350_PDMA_RST_CFG (RT5350_PDMA_OFFSET + 0x208)
++#define RT5350_DLY_INT_CFG (RT5350_PDMA_OFFSET + 0x20c)
++#define RT5350_FE_INT_STATUS (RT5350_PDMA_OFFSET + 0x220)
++#define RT5350_FE_INT_ENABLE (RT5350_PDMA_OFFSET + 0x228)
++#define RT5350_PDMA_SCH_CFG (RT5350_PDMA_OFFSET + 0x280)
++
++#define FE_PDMA_GLO_CFG (FE_PDMA_OFFSET + 0x00)
++#define FE_PDMA_RST_CFG (FE_PDMA_OFFSET + 0x04)
++#define FE_PDMA_SCH_CFG (FE_PDMA_OFFSET + 0x08)
++#define FE_DLY_INT_CFG (FE_PDMA_OFFSET + 0x0C)
++#define FE_TX_BASE_PTR0 (FE_PDMA_OFFSET + 0x10)
++#define FE_TX_MAX_CNT0 (FE_PDMA_OFFSET + 0x14)
++#define FE_TX_CTX_IDX0 (FE_PDMA_OFFSET + 0x18)
++#define FE_TX_DTX_IDX0 (FE_PDMA_OFFSET + 0x1C)
++#define FE_TX_BASE_PTR1 (FE_PDMA_OFFSET + 0x20)
++#define FE_TX_MAX_CNT1 (FE_PDMA_OFFSET + 0x24)
++#define FE_TX_CTX_IDX1 (FE_PDMA_OFFSET + 0x28)
++#define FE_TX_DTX_IDX1 (FE_PDMA_OFFSET + 0x2C)
++#define FE_RX_BASE_PTR0 (FE_PDMA_OFFSET + 0x30)
++#define FE_RX_MAX_CNT0 (FE_PDMA_OFFSET + 0x34)
++#define FE_RX_CALC_IDX0 (FE_PDMA_OFFSET + 0x38)
++#define FE_RX_DRX_IDX0 (FE_PDMA_OFFSET + 0x3C)
++#define FE_TX_BASE_PTR2 (FE_PDMA_OFFSET + 0x40)
++#define FE_TX_MAX_CNT2 (FE_PDMA_OFFSET + 0x44)
++#define FE_TX_CTX_IDX2 (FE_PDMA_OFFSET + 0x48)
++#define FE_TX_DTX_IDX2 (FE_PDMA_OFFSET + 0x4C)
++#define FE_TX_BASE_PTR3 (FE_PDMA_OFFSET + 0x50)
++#define FE_TX_MAX_CNT3 (FE_PDMA_OFFSET + 0x54)
++#define FE_TX_CTX_IDX3 (FE_PDMA_OFFSET + 0x58)
++#define FE_TX_DTX_IDX3 (FE_PDMA_OFFSET + 0x5C)
++#define FE_RX_BASE_PTR1 (FE_PDMA_OFFSET + 0x60)
++#define FE_RX_MAX_CNT1 (FE_PDMA_OFFSET + 0x64)
++#define FE_RX_CALC_IDX1 (FE_PDMA_OFFSET + 0x68)
++#define FE_RX_DRX_IDX1 (FE_PDMA_OFFSET + 0x6C)
++
++#define RT5350_SDM_CFG (RT5350_SDM_OFFSET + 0x00) //Switch DMA configuration
++#define RT5350_SDM_RRING (RT5350_SDM_OFFSET + 0x04) //Switch DMA Rx Ring
++#define RT5350_SDM_TRING (RT5350_SDM_OFFSET + 0x08) //Switch DMA Tx Ring
++#define RT5350_SDM_MAC_ADRL (RT5350_SDM_OFFSET + 0x0C) //Switch MAC address LSB
++#define RT5350_SDM_MAC_ADRH (RT5350_SDM_OFFSET + 0x10) //Switch MAC Address MSB
++#define RT5350_SDM_TPCNT (RT5350_SDM_OFFSET + 0x100) //Switch DMA Tx packet count
++#define RT5350_SDM_TBCNT (RT5350_SDM_OFFSET + 0x104) //Switch DMA Tx byte count
++#define RT5350_SDM_RPCNT (RT5350_SDM_OFFSET + 0x108) //Switch DMA rx packet count
++#define RT5350_SDM_RBCNT (RT5350_SDM_OFFSET + 0x10C) //Switch DMA rx byte count
++#define RT5350_SDM_CS_ERR (RT5350_SDM_OFFSET + 0x110) //Switch DMA rx checksum error count
++
++#define RT5350_SDM_ICS_EN BIT(16)
++#define RT5350_SDM_TCS_EN BIT(17)
++#define RT5350_SDM_UCS_EN BIT(18)
++
++
++/* MDIO_CFG register bits */
++#define FE_MDIO_CFG_AUTO_POLL_EN BIT(29)
++#define FE_MDIO_CFG_GP1_BP_EN BIT(16)
++#define FE_MDIO_CFG_GP1_FRC_EN BIT(15)
++#define FE_MDIO_CFG_GP1_SPEED_10 (0 << 13)
++#define FE_MDIO_CFG_GP1_SPEED_100 (1 << 13)
++#define FE_MDIO_CFG_GP1_SPEED_1000 (2 << 13)
++#define FE_MDIO_CFG_GP1_DUPLEX BIT(12)
++#define FE_MDIO_CFG_GP1_FC_TX BIT(11)
++#define FE_MDIO_CFG_GP1_FC_RX BIT(10)
++#define FE_MDIO_CFG_GP1_LNK_DWN BIT(9)
++#define FE_MDIO_CFG_GP1_AN_FAIL BIT(8)
++#define FE_MDIO_CFG_MDC_CLK_DIV_1 (0 << 6)
++#define FE_MDIO_CFG_MDC_CLK_DIV_2 (1 << 6)
++#define FE_MDIO_CFG_MDC_CLK_DIV_4 (2 << 6)
++#define FE_MDIO_CFG_MDC_CLK_DIV_8 (3 << 6)
++#define FE_MDIO_CFG_TURBO_MII_FREQ BIT(5)
++#define FE_MDIO_CFG_TURBO_MII_MODE BIT(4)
++#define FE_MDIO_CFG_RX_CLK_SKEW_0 (0 << 2)
++#define FE_MDIO_CFG_RX_CLK_SKEW_200 (1 << 2)
++#define FE_MDIO_CFG_RX_CLK_SKEW_400 (2 << 2)
++#define FE_MDIO_CFG_RX_CLK_SKEW_INV (3 << 2)
++#define FE_MDIO_CFG_TX_CLK_SKEW_0 0
++#define FE_MDIO_CFG_TX_CLK_SKEW_200 1
++#define FE_MDIO_CFG_TX_CLK_SKEW_400 2
++#define FE_MDIO_CFG_TX_CLK_SKEW_INV 3
++
++/* uni-cast port */
++#define FE_GDM1_ICS_EN BIT(22)
++#define FE_GDM1_TCS_EN BIT(21)
++#define FE_GDM1_UCS_EN BIT(20)
++#define FE_GDM1_JMB_EN BIT(19)
++#define FE_GDM1_STRPCRC BIT(16)
++#define FE_GDM1_UFRC_P_CPU (0 << 12)
++#define FE_GDM1_UFRC_P_GDMA1 (1 << 12)
++#define FE_GDM1_UFRC_P_PPE (6 << 12)
++
++/* checksums */
++#define FE_ICS_GEN_EN BIT(2)
++#define FE_UCS_GEN_EN BIT(1)
++#define FE_TCS_GEN_EN BIT(0)
++
++/* dma ring */
++#define FE_PST_DRX_IDX0 BIT(16)
++#define FE_PST_DTX_IDX3 BIT(3)
++#define FE_PST_DTX_IDX2 BIT(2)
++#define FE_PST_DTX_IDX1 BIT(1)
++#define FE_PST_DTX_IDX0 BIT(0)
++
++#define FE_TX_WB_DDONE BIT(6)
++#define FE_RX_DMA_BUSY BIT(3)
++#define FE_TX_DMA_BUSY BIT(1)
++#define FE_RX_DMA_EN BIT(2)
++#define FE_TX_DMA_EN BIT(0)
++
++#define FE_PDMA_SIZE_4DWORDS (0 << 4)
++#define FE_PDMA_SIZE_8DWORDS (1 << 4)
++#define FE_PDMA_SIZE_16DWORDS (2 << 4)
++
++#define FE_US_CYC_CNT_MASK 0xff
++#define FE_US_CYC_CNT_SHIFT 0x8
++#define FE_US_CYC_CNT_DIVISOR 1000000
++
++#define RX_DMA_PLEN0(_x) (((_x) >> 16) & 0x3fff)
++#define RX_DMA_LSO BIT(30)
++#define RX_DMA_DONE BIT(31)
++#define RX_DMA_L4VALID BIT(30)
++
++struct fe_rx_dma {
++ unsigned int rxd1;
++ unsigned int rxd2;
++ unsigned int rxd3;
++ unsigned int rxd4;
++} __packed __aligned(4);
++
++#define TX_DMA_PLEN0_MASK ((0x3fff) << 16)
++#define TX_DMA_PLEN0(_x) (((_x) & 0x3fff) << 16)
++#define TX_DMA_PLEN1(_x) ((_x) & 0x3fff)
++#define TX_DMA_LS1 BIT(14)
++#define TX_DMA_LSO BIT(30)
++#define TX_DMA_DONE BIT(31)
++#define TX_DMA_QN(_x) ((_x) << 16)
++#define TX_DMA_PN(_x) ((_x) << 24)
++#define TX_DMA_QN_MASK TX_DMA_QN(0x7)
++#define TX_DMA_PN_MASK TX_DMA_PN(0x7)
++#define TX_DMA_CHKSUM (0x7 << 29)
++
++struct fe_tx_dma {
++ unsigned int txd1;
++ unsigned int txd2;
++ unsigned int txd3;
++ unsigned int txd4;
++} __packed __aligned(4);
++
++struct fe_priv;
++
++struct fe_phy {
++ struct phy_device *phy[8];
++ struct device_node *phy_node[8];
++ const __be32 *phy_fixed[8];
++ int duplex[8];
++ int speed[8];
++ int tx_fc[8];
++ int rx_fc[8];
++ spinlock_t lock;
++
++ int (*connect)(struct fe_priv *priv);
++ void (*disconnect)(struct fe_priv *priv);
++ void (*start)(struct fe_priv *priv);
++ void (*stop)(struct fe_priv *priv);
++};
++
++struct fe_soc_data
++{
++ unsigned char mac[6];
++ const u32 *reg_table;
++
++ void (*init_data)(struct fe_soc_data *data);
++ void (*reset_fe)(void);
++ void (*set_mac)(struct fe_priv *priv, unsigned char *mac);
++ void (*fwd_config)(struct fe_priv *priv);
++ void (*tx_dma)(struct fe_priv *priv, int idx, struct sk_buff *skb);
++ void (*rx_dma)(struct fe_priv *priv, int idx, int len);
++ int (*switch_init)(struct fe_priv *priv);
++ int (*switch_config)(struct fe_priv *priv);
++ void (*port_init)(struct fe_priv *priv, struct device_node *port);
++ int (*has_carrier)(struct fe_priv *priv);
++ int (*mdio_init)(struct fe_priv *priv);
++ void (*mdio_cleanup)(struct fe_priv *priv);
++ int (*mdio_write)(struct mii_bus *bus, int phy_addr, int phy_reg, u16 val);
++ int (*mdio_read)(struct mii_bus *bus, int phy_addr, int phy_reg);
++ void (*mdio_adjust_link)(struct fe_priv *priv, int port);
++ int (*get_skb_header)(struct sk_buff *skb, void **iphdr, void **tcph, u64 *hdr_flags, void *priv);
++
++ void *swpriv;
++ u32 pdma_glo_cfg;
++ u32 rx_dly_int;
++ u32 tx_dly_int;
++ u32 checksum_bit;
++ u32 tso;
++
++ int min_pkt_len;
++};
++
++struct fe_priv
++{
++ spinlock_t page_lock;
++
++ struct fe_soc_data *soc;
++ struct net_device *netdev;
++ struct device *device;
++ unsigned long sysclk;
++
++ struct fe_rx_dma *rx_dma;
++ struct napi_struct rx_napi;
++ struct sk_buff *rx_skb[NUM_DMA_DESC];
++ dma_addr_t rx_phys;
++
++ struct fe_tx_dma *tx_dma;
++ struct tasklet_struct tx_tasklet;
++ struct sk_buff *tx_skb[NUM_DMA_DESC];
++ dma_addr_t tx_phys;
++ unsigned int tx_free_idx;
++
++ struct fe_phy *phy;
++ struct mii_bus *mii_bus;
++ int mii_irq[PHY_MAX_ADDR];
++
++ int link[8];
++
++ struct net_lro_mgr lro_mgr;
++ struct net_lro_desc lro_arr[8];
++};
++
++extern const struct of_device_id of_fe_match[];
++
++void fe_w32(u32 val, unsigned reg);
++u32 fe_r32(unsigned reg);
++
++#endif /* FE_ETH_H */
+diff --git a/drivers/net/ethernet/ralink/soc_mt7620.c b/drivers/net/ethernet/ralink/soc_mt7620.c
+new file mode 100644
+index 0000000..79b7b85
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/soc_mt7620.c
+@@ -0,0 +1,172 @@
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; version 2 of the License
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ * Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/if_vlan.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#include <mt7620.h>
++#include "ralink_soc_eth.h"
++#include "gsw_mt7620a.h"
++
++#define MT7620A_CDMA_CSG_CFG 0x400
++#define MT7620_DMA_VID (MT7620A_CDMA_CSG_CFG | 0x30)
++#define MT7620A_DMA_2B_OFFSET BIT(31)
++#define MT7620A_RESET_FE BIT(21)
++#define MT7620A_RESET_ESW BIT(23)
++#define MT7620_L4_VALID BIT(23)
++
++#define SYSC_REG_RESET_CTRL 0x34
++#define MAX_RX_LENGTH 1536
++
++#define CDMA_ICS_EN BIT(2)
++#define CDMA_UCS_EN BIT(1)
++#define CDMA_TCS_EN BIT(0)
++
++#define GDMA_ICS_EN BIT(22)
++#define GDMA_TCS_EN BIT(21)
++#define GDMA_UCS_EN BIT(20)
++
++static const u32 rt5350_reg_table[FE_REG_COUNT] = {
++ [FE_REG_PDMA_GLO_CFG] = RT5350_PDMA_GLO_CFG,
++ [FE_REG_PDMA_RST_CFG] = RT5350_PDMA_RST_CFG,
++ [FE_REG_DLY_INT_CFG] = RT5350_DLY_INT_CFG,
++ [FE_REG_TX_BASE_PTR0] = RT5350_TX_BASE_PTR0,
++ [FE_REG_TX_MAX_CNT0] = RT5350_TX_MAX_CNT0,
++ [FE_REG_TX_CTX_IDX0] = RT5350_TX_CTX_IDX0,
++ [FE_REG_RX_BASE_PTR0] = RT5350_RX_BASE_PTR0,
++ [FE_REG_RX_MAX_CNT0] = RT5350_RX_MAX_CNT0,
++ [FE_REG_RX_CALC_IDX0] = RT5350_RX_CALC_IDX0,
++ [FE_REG_FE_INT_ENABLE] = RT5350_FE_INT_ENABLE,
++ [FE_REG_FE_INT_STATUS] = RT5350_FE_INT_STATUS,
++ [FE_REG_FE_DMA_VID_BASE] = MT7620_DMA_VID,
++};
++
++static void mt7620_fe_reset(void)
++{
++ rt_sysc_w32(MT7620A_RESET_FE | MT7620A_RESET_ESW, SYSC_REG_RESET_CTRL);
++ rt_sysc_w32(0, SYSC_REG_RESET_CTRL);
++}
++
++static void mt7620_fwd_config(struct fe_priv *priv)
++{
++ int i;
++
++ /* frame engine will push VLAN tag regarding to VIDX feild in Tx desc. */
++ for (i = 0; i < 16; i += 2)
++ fe_w32(((i + 1) << 16) + i, MT7620_DMA_VID + (i * 2));
++
++ fe_w32(fe_r32(MT7620A_GDMA1_FWD_CFG) & ~7, MT7620A_GDMA1_FWD_CFG);
++ fe_w32(fe_r32(MT7620A_GDMA1_FWD_CFG) | (GDMA_ICS_EN | GDMA_TCS_EN | GDMA_UCS_EN), MT7620A_GDMA1_FWD_CFG);
++ fe_w32(fe_r32(MT7620A_CDMA_CSG_CFG) | (CDMA_ICS_EN | CDMA_UCS_EN | CDMA_TCS_EN), MT7620A_CDMA_CSG_CFG);
++}
++
++static void mt7620_tx_dma(struct fe_priv *priv, int idx, struct sk_buff *skb)
++{
++ unsigned int nr_frags = 0;
++ unsigned int len = 0;
++
++ if (skb) {
++ nr_frags = skb_shinfo(skb)->nr_frags;
++ len = skb->len - skb->data_len;
++ }
++
++ if (!skb)
++ priv->tx_dma[idx].txd2 = TX_DMA_LSO | TX_DMA_DONE;
++ else if (!nr_frags)
++ priv->tx_dma[idx].txd2 = TX_DMA_LSO | TX_DMA_PLEN0(len);
++ else
++ priv->tx_dma[idx].txd2 = TX_DMA_PLEN0(len);
++
++ if(skb && vlan_tx_tag_present(skb))
++ priv->tx_dma[idx].txd4 = 0x80 | (vlan_tx_tag_get(skb) >> 13) << 4 | (vlan_tx_tag_get(skb) & 0xF);
++ else
++ priv->tx_dma[idx].txd4 = 0;
++}
++
++static void mt7620_rx_dma(struct fe_priv *priv, int idx, int len)
++{
++ priv->rx_dma[idx].rxd2 = RX_DMA_PLEN0(len);
++}
++
++#ifdef CONFIG_INET_LRO
++static int
++mt7620_get_skb_header(struct sk_buff *skb, void **iphdr, void **tcph,
++ u64 *hdr_flags, void *_priv)
++{
++ struct iphdr *iph = NULL;
++ int vhdr_len = 0;
++
++ /*
++ * Make sure that this packet is Ethernet II, is not VLAN
++ * tagged, is IPv4, has a valid IP header, and is TCP.
++ */
++ if (skb->protocol == 0x0081)
++ vhdr_len = VLAN_HLEN;
++
++ iph = (struct iphdr *)(skb->data + vhdr_len);
++ if(iph->protocol != IPPROTO_TCP)
++ return -1;
++
++ *iphdr = iph;
++ *tcph = skb->data + (iph->ihl << 2) + vhdr_len;
++ *hdr_flags = LRO_IPV4 | LRO_TCP;
++
++ return 0;
++}
++#endif
++
++static void mt7620_init_data(struct fe_soc_data *data)
++{
++ if (mt7620_get_eco() >= 5)
++ data->tso = 1;
++}
++
++static struct fe_soc_data mt7620_data = {
++ .mac = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55 },
++ .init_data = mt7620_init_data,
++ .reset_fe = mt7620_fe_reset,
++ .set_mac = mt7620_set_mac,
++ .fwd_config = mt7620_fwd_config,
++ .tx_dma = mt7620_tx_dma,
++ .rx_dma = mt7620_rx_dma,
++ .switch_init = mt7620_gsw_probe,
++ .switch_config = mt7620_gsw_config,
++ .port_init = mt7620_port_init,
++ .min_pkt_len = 0,
++ .reg_table = rt5350_reg_table,
++ .pdma_glo_cfg = FE_PDMA_SIZE_16DWORDS | MT7620A_DMA_2B_OFFSET,
++ .rx_dly_int = RT5350_RX_DLY_INT,
++ .tx_dly_int = RT5350_TX_DLY_INT,
++ .checksum_bit = MT7620_L4_VALID,
++ .has_carrier = mt7620a_has_carrier,
++ .mdio_read = mt7620_mdio_read,
++ .mdio_write = mt7620_mdio_write,
++ .mdio_adjust_link = mt7620_mdio_link_adjust,
++#ifdef CONFIG_INET_LRO
++ .get_skb_header = mt7620_get_skb_header,
++#endif
++};
++
++const struct of_device_id of_fe_match[] = {
++ { .compatible = "ralink,mt7620a-eth", .data = &mt7620_data },
++ {},
++};
++
++MODULE_DEVICE_TABLE(of, of_fe_match);
+diff --git a/drivers/net/ethernet/ralink/soc_rt2880.c b/drivers/net/ethernet/ralink/soc_rt2880.c
+new file mode 100644
+index 0000000..e0c418b
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/soc_rt2880.c
+@@ -0,0 +1,52 @@
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; version 2 of the License
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ * Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/module.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#include "ralink_soc_eth.h"
++#include "mdio_rt2880.h"
++
++#define SYSC_REG_RESET_CTRL 0x034
++#define RT2880_RESET_FE BIT(18)
++
++void rt2880_fe_reset(void)
++{
++ rt_sysc_w32(RT2880_RESET_FE, SYSC_REG_RESET_CTRL);
++}
++
++struct fe_soc_data rt2880_data = {
++ .mac = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55 },
++ .reset_fe = rt2880_fe_reset,
++ .min_pkt_len = 64,
++ .pdma_glo_cfg = FE_PDMA_SIZE_4DWORDS,
++ .checksum_bit = RX_DMA_L4VALID,
++ .rx_dly_int = FE_RX_DLY_INT,
++ .tx_dly_int = FE_TX_DLY_INT,
++ .mdio_read = rt2880_mdio_read,
++ .mdio_write = rt2880_mdio_write,
++ .mdio_adjust_link = rt2880_mdio_link_adjust,
++ .port_init = rt2880_port_init,
++};
++
++const struct of_device_id of_fe_match[] = {
++ { .compatible = "ralink,rt2880-eth", .data = &rt2880_data },
++ {},
++};
++
++MODULE_DEVICE_TABLE(of, of_fe_match);
+diff --git a/drivers/net/ethernet/ralink/soc_rt305x.c b/drivers/net/ethernet/ralink/soc_rt305x.c
+new file mode 100644
+index 0000000..482ca1f
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/soc_rt305x.c
+@@ -0,0 +1,113 @@
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; version 2 of the License
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ * Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/module.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#include "ralink_soc_eth.h"
++
++#define RT305X_RESET_FE BIT(21)
++#define RT305X_RESET_ESW BIT(23)
++#define SYSC_REG_RESET_CTRL 0x034
++
++static const u32 rt5350_reg_table[FE_REG_COUNT] = {
++ [FE_REG_PDMA_GLO_CFG] = RT5350_PDMA_GLO_CFG,
++ [FE_REG_PDMA_RST_CFG] = RT5350_PDMA_RST_CFG,
++ [FE_REG_DLY_INT_CFG] = RT5350_DLY_INT_CFG,
++ [FE_REG_TX_BASE_PTR0] = RT5350_TX_BASE_PTR0,
++ [FE_REG_TX_MAX_CNT0] = RT5350_TX_MAX_CNT0,
++ [FE_REG_TX_CTX_IDX0] = RT5350_TX_CTX_IDX0,
++ [FE_REG_RX_BASE_PTR0] = RT5350_RX_BASE_PTR0,
++ [FE_REG_RX_MAX_CNT0] = RT5350_RX_MAX_CNT0,
++ [FE_REG_RX_CALC_IDX0] = RT5350_RX_CALC_IDX0,
++ [FE_REG_FE_INT_ENABLE] = RT5350_FE_INT_ENABLE,
++ [FE_REG_FE_INT_STATUS] = RT5350_FE_INT_STATUS,
++ [FE_REG_FE_DMA_VID_BASE] = 0,
++};
++
++static void rt305x_fe_reset(void)
++{
++ rt_sysc_w32(RT305X_RESET_FE, SYSC_REG_RESET_CTRL);
++ rt_sysc_w32(0, SYSC_REG_RESET_CTRL);
++}
++
++static void rt5350_set_mac(struct fe_priv *priv, unsigned char *mac)
++{
++ unsigned long flags;
++
++ spin_lock_irqsave(&priv->page_lock, flags);
++ fe_w32((mac[0] << 8) | mac[1], RT5350_SDM_MAC_ADRH);
++ fe_w32((mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5],
++ RT5350_SDM_MAC_ADRL);
++ spin_unlock_irqrestore(&priv->page_lock, flags);
++}
++
++static void rt5350_fwd_config(struct fe_priv *priv)
++{
++ unsigned long sysclk = priv->sysclk;
++
++ if (sysclk) {
++ sysclk /= FE_US_CYC_CNT_DIVISOR;
++ sysclk <<= FE_US_CYC_CNT_SHIFT;
++
++ fe_w32((fe_r32(FE_FE_GLO_CFG) &
++ ~(FE_US_CYC_CNT_MASK << FE_US_CYC_CNT_SHIFT)) | sysclk,
++ FE_FE_GLO_CFG);
++ }
++
++ fe_w32(fe_r32(RT5350_SDM_CFG) & ~0xffff, RT5350_SDM_CFG);
++ fe_w32(fe_r32(RT5350_SDM_CFG) | RT5350_SDM_ICS_EN | RT5350_SDM_TCS_EN | RT5350_SDM_UCS_EN,
++ RT5350_SDM_CFG);
++}
++
++static void rt5350_fe_reset(void)
++{
++ rt_sysc_w32(RT305X_RESET_FE | RT305X_RESET_ESW, SYSC_REG_RESET_CTRL);
++ rt_sysc_w32(0, SYSC_REG_RESET_CTRL);
++}
++
++static struct fe_soc_data rt3050_data = {
++ .mac = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55 },
++ .reset_fe = rt305x_fe_reset,
++ .min_pkt_len = 64,
++ .pdma_glo_cfg = FE_PDMA_SIZE_4DWORDS,
++ .checksum_bit = RX_DMA_L4VALID,
++ .rx_dly_int = FE_RX_DLY_INT,
++ .tx_dly_int = FE_TX_DLY_INT,
++};
++
++static struct fe_soc_data rt5350_data = {
++ .mac = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55 },
++ .reg_table = rt5350_reg_table,
++ .reset_fe = rt5350_fe_reset,
++ .set_mac = rt5350_set_mac,
++ .fwd_config = rt5350_fwd_config,
++ .min_pkt_len = 64,
++ .pdma_glo_cfg = FE_PDMA_SIZE_4DWORDS,
++ .checksum_bit = RX_DMA_L4VALID,
++ .rx_dly_int = RT5350_RX_DLY_INT,
++ .tx_dly_int = RT5350_TX_DLY_INT,
++};
++
++const struct of_device_id of_fe_match[] = {
++ { .compatible = "ralink,rt3050-eth", .data = &rt3050_data },
++ { .compatible = "ralink,rt5350-eth", .data = &rt5350_data },
++ {},
++};
++
++MODULE_DEVICE_TABLE(of, of_fe_match);
+diff --git a/drivers/net/ethernet/ralink/soc_rt3883.c b/drivers/net/ethernet/ralink/soc_rt3883.c
+new file mode 100644
+index 0000000..c660529c
+--- /dev/null
++++ b/drivers/net/ethernet/ralink/soc_rt3883.c
+@@ -0,0 +1,60 @@
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; version 2 of the License
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ * Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/module.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#include "ralink_soc_eth.h"
++#include "mdio_rt2880.h"
++
++#define RT3883_SYSC_REG_RSTCTRL 0x34
++#define RT3883_RSTCTRL_FE BIT(21)
++
++static void rt3883_fe_reset(void)
++{
++ u32 t;
++
++ t = rt_sysc_r32(RT3883_SYSC_REG_RSTCTRL);
++ t |= RT3883_RSTCTRL_FE;
++ rt_sysc_w32(t , RT3883_SYSC_REG_RSTCTRL);
++
++ t &= ~RT3883_RSTCTRL_FE;
++ rt_sysc_w32(t, RT3883_SYSC_REG_RSTCTRL);
++}
++
++static struct fe_soc_data rt3883_data = {
++ .mac = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55 },
++ .reset_fe = rt3883_fe_reset,
++ .min_pkt_len = 64,
++ .pdma_glo_cfg = FE_PDMA_SIZE_4DWORDS,
++ .rx_dly_int = FE_RX_DLY_INT,
++ .tx_dly_int = FE_TX_DLY_INT,
++ .checksum_bit = RX_DMA_L4VALID,
++ .mdio_read = rt2880_mdio_read,
++ .mdio_write = rt2880_mdio_write,
++ .mdio_adjust_link = rt2880_mdio_link_adjust,
++ .port_init = rt2880_port_init,
++};
++
++const struct of_device_id of_fe_match[] = {
++ { .compatible = "ralink,rt3883-eth", .data = &rt3883_data },
++ {},
++};
++
++MODULE_DEVICE_TABLE(of, of_fe_match);
++
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0036-NET-add-mt7621-ethernet-driver.patch b/target/linux/ramips/patches-3.14/0036-NET-add-mt7621-ethernet-driver.patch
new file mode 100644
index 0000000000..02fc834020
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0036-NET-add-mt7621-ethernet-driver.patch
@@ -0,0 +1,6134 @@
+From 810c2afe0c7e1be9352ad512b337110b100bfe3a Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 16 Mar 2014 08:51:14 +0000
+Subject: [PATCH 36/57] NET: add mt7621 ethernet driver
+
+---
+ arch/mips/include/asm/rt2880/board-custom.h | 153 +++
+ arch/mips/include/asm/rt2880/eureka_ep430.h | 204 ++++
+ arch/mips/include/asm/rt2880/generic.h | 42 +
+ arch/mips/include/asm/rt2880/lm.h | 32 +
+ arch/mips/include/asm/rt2880/prom.h | 50 +
+ arch/mips/include/asm/rt2880/rt_mmap.h | 796 ++++++++++++++++
+ arch/mips/include/asm/rt2880/serial_rt2880.h | 443 +++++++++
+ arch/mips/include/asm/rt2880/sizes.h | 52 +
+ arch/mips/include/asm/rt2880/surfboard.h | 70 ++
+ arch/mips/include/asm/rt2880/surfboardint.h | 190 ++++
+ arch/mips/include/asm/rt2880/war.h | 25 +
+ drivers/net/ethernet/Kconfig | 1 +
+ drivers/net/ethernet/Makefile | 1 +
+ drivers/net/ethernet/raeth/Kconfig | 344 +++++++
+ drivers/net/ethernet/raeth/Makefile | 7 +
+ drivers/net/ethernet/raeth/ethtool_readme.txt | 44 +
+ drivers/net/ethernet/raeth/mii_mgr.c | 166 ++++
+ drivers/net/ethernet/raeth/ra2882ethreg.h | 1268 +++++++++++++++++++++++++
+ drivers/net/ethernet/raeth/ra_ioctl.h | 92 ++
+ drivers/net/ethernet/raeth/ra_mac.c | 98 ++
+ drivers/net/ethernet/raeth/ra_mac.h | 35 +
+ drivers/net/ethernet/raeth/raether.c | 693 ++++++++++++++
+ drivers/net/ethernet/raeth/raether.h | 92 ++
+ drivers/net/ethernet/raeth/raether_pdma.c | 212 +++++
+ drivers/net/ethernet/raeth/raether_qdma.c | 805 ++++++++++++++++
+ 25 files changed, 5915 insertions(+)
+ create mode 100644 arch/mips/include/asm/rt2880/board-custom.h
+ create mode 100644 arch/mips/include/asm/rt2880/eureka_ep430.h
+ create mode 100644 arch/mips/include/asm/rt2880/generic.h
+ create mode 100644 arch/mips/include/asm/rt2880/lm.h
+ create mode 100644 arch/mips/include/asm/rt2880/prom.h
+ create mode 100644 arch/mips/include/asm/rt2880/rt_mmap.h
+ create mode 100644 arch/mips/include/asm/rt2880/serial_rt2880.h
+ create mode 100644 arch/mips/include/asm/rt2880/sizes.h
+ create mode 100644 arch/mips/include/asm/rt2880/surfboard.h
+ create mode 100644 arch/mips/include/asm/rt2880/surfboardint.h
+ create mode 100644 arch/mips/include/asm/rt2880/war.h
+ create mode 100644 drivers/net/ethernet/raeth/Kconfig
+ create mode 100644 drivers/net/ethernet/raeth/Makefile
+ create mode 100644 drivers/net/ethernet/raeth/ethtool_readme.txt
+ create mode 100644 drivers/net/ethernet/raeth/mii_mgr.c
+ create mode 100644 drivers/net/ethernet/raeth/ra2882ethreg.h
+ create mode 100644 drivers/net/ethernet/raeth/ra_ioctl.h
+ create mode 100644 drivers/net/ethernet/raeth/ra_mac.c
+ create mode 100644 drivers/net/ethernet/raeth/ra_mac.h
+ create mode 100644 drivers/net/ethernet/raeth/raether.c
+ create mode 100644 drivers/net/ethernet/raeth/raether.h
+ create mode 100644 drivers/net/ethernet/raeth/raether_pdma.c
+ create mode 100644 drivers/net/ethernet/raeth/raether_qdma.c
+
+diff --git a/arch/mips/include/asm/rt2880/board-custom.h b/arch/mips/include/asm/rt2880/board-custom.h
+new file mode 100644
+index 0000000..120e846
+--- /dev/null
++++ b/arch/mips/include/asm/rt2880/board-custom.h
+@@ -0,0 +1,153 @@
++/* Copyright Statement:
++ *
++ * This software/firmware and related documentation ("MediaTek Software") are
++ * protected under relevant copyright laws. The information contained herein
++ * is confidential and proprietary to MediaTek Inc. and/or its licensors.
++ * Without the prior written permission of MediaTek inc. and/or its licensors,
++ * any reproduction, modification, use or disclosure of MediaTek Software,
++ * and information contained herein, in whole or in part, shall be strictly prohibited.
++ */
++/* MediaTek Inc. (C) 2010. All rights reserved.
++ *
++ * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
++ * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
++ * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON
++ * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
++ * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
++ * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
++ * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH
++ * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES
++ * THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES
++ * CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK
++ * SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
++ * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND
++ * CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
++ * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
++ * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO
++ * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
++ *
++ * The following software/firmware and/or related documentation ("MediaTek Software")
++ * have been modified by MediaTek Inc. All revisions are subject to any receiver's
++ * applicable license agreements with MediaTek Inc.
++ */
++
++#ifndef __ARCH_ARM_MACH_MT6575_CUSTOM_BOARD_H
++#define __ARCH_ARM_MACH_MT6575_CUSTOM_BOARD_H
++
++#include <linux/autoconf.h>
++
++/*=======================================================================*/
++/* MT6575 SD */
++/*=======================================================================*/
++#ifdef MTK_EMMC_SUPPORT
++#define CFG_DEV_MSDC0
++#endif
++#define CFG_DEV_MSDC1
++#define CFG_DEV_MSDC2
++#define CFG_DEV_MSDC3
++#if defined(CONFIG_MTK_COMBO) || defined(CONFIG_MTK_COMBO_MODULE)
++/*
++SDIO slot index number used by connectivity combo chip:
++0: invalid (used by memory card)
++1: MSDC1
++2: MSDC2
++*/
++#define CONFIG_MTK_WCN_CMB_SDIO_SLOT (2) /* MSDC2 */
++#else
++#undef CONFIG_MTK_WCN_CMB_SDIO_SLOT
++#endif
++
++#if 0 /* FIXME. */
++/*=======================================================================*/
++/* MT6575 UART */
++/*=======================================================================*/
++#define CFG_DEV_UART1
++#define CFG_DEV_UART2
++#define CFG_DEV_UART3
++#define CFG_DEV_UART4
++
++#define CFG_UART_PORTS (4)
++
++/*=======================================================================*/
++/* MT6575 I2C */
++/*=======================================================================*/
++#define CFG_DEV_I2C
++//#define CFG_I2C_HIGH_SPEED_MODE
++//#define CFG_I2C_DMA_MODE
++
++/*=======================================================================*/
++/* MT6575 ADB */
++/*=======================================================================*/
++#define ADB_SERIAL "E1K"
++
++#endif
++
++/*=======================================================================*/
++/* MT6575 NAND FLASH */
++/*=======================================================================*/
++#if 0
++#define RAMDOM_READ 1<<0
++#define CACHE_READ 1<<1
++/*******************************************************************************
++ * NFI & ECC Configuration
++ *******************************************************************************/
++typedef struct
++{
++ u16 id; //deviceid+menuid
++ u8 addr_cycle;
++ u8 iowidth;
++ u16 totalsize;
++ u16 blocksize;
++ u16 pagesize;
++ u32 timmingsetting;
++ char devciename[14];
++ u32 advancedmode; //
++}flashdev_info,*pflashdev_info;
++
++static const flashdev_info g_FlashTable[]={
++ //micro
++ {0xAA2C, 5, 8, 256, 128, 2048, 0x01113, "MT29F2G08ABD", 0},
++ {0xB12C, 4, 16, 128, 128, 2048, 0x01113, "MT29F1G16ABC", 0},
++ {0xBA2C, 5, 16, 256, 128, 2048, 0x01113, "MT29F2G16ABD", 0},
++ {0xAC2C, 5, 8, 512, 128, 2048, 0x01113, "MT29F4G08ABC", 0},
++ {0xBC2C, 5, 16, 512, 128, 2048, 0x44333, "MT29F4G16ABD", 0},
++ //samsung
++ {0xBAEC, 5, 16, 256, 128, 2048, 0x01123, "K522H1GACE", 0},
++ {0xBCEC, 5, 16, 512, 128, 2048, 0x01123, "K524G2GACB", 0},
++ {0xDAEC, 5, 8, 256, 128, 2048, 0x33222, "K9F2G08U0A", RAMDOM_READ},
++ {0xF1EC, 4, 8, 128, 128, 2048, 0x01123, "K9F1G08U0A", RAMDOM_READ},
++ {0xAAEC, 5, 8, 256, 128, 2048, 0x01123, "K9F2G08R0A", 0},
++ //hynix
++ {0xD3AD, 5, 8, 1024, 256, 2048, 0x44333, "HY27UT088G2A", 0},
++ {0xA1AD, 4, 8, 128, 128, 2048, 0x01123, "H8BCSOPJOMCP", 0},
++ {0xBCAD, 5, 16, 512, 128, 2048, 0x01123, "H8BCSOUNOMCR", 0},
++ {0xBAAD, 5, 16, 256, 128, 2048, 0x01123, "H8BCSOSNOMCR", 0},
++ //toshiba
++ {0x9598, 5, 16, 816, 128, 2048, 0x00113, "TY9C000000CMG", 0},
++ {0x9498, 5, 16, 375, 128, 2048, 0x00113, "TY9C000000CMG", 0},
++ {0xC198, 4, 16, 128, 128, 2048, 0x44333, "TC58NWGOS8C", 0},
++ {0xBA98, 5, 16, 256, 128, 2048, 0x02113, "TC58NYG1S8C", 0},
++ //st-micro
++ {0xBA20, 5, 16, 256, 128, 2048, 0x01123, "ND02CGR4B2DI6", 0},
++
++ // elpida
++ {0xBC20, 5, 16, 512, 128, 2048, 0x01123, "04GR4B2DDI6", 0},
++ {0x0000, 0, 0, 0, 0, 0, 0, "xxxxxxxxxxxxx", 0}
++};
++#endif
++
++
++#define NFI_DEFAULT_ACCESS_TIMING (0x44333)
++
++//uboot only support 1 cs
++#define NFI_CS_NUM (2)
++#define NFI_DEFAULT_CS (0)
++
++#define USE_AHB_MODE (1)
++
++#define PLATFORM_EVB (1)
++
++#endif /* __ARCH_ARM_MACH_MT6575_CUSTOM_BOARD_H */
++
+diff --git a/arch/mips/include/asm/rt2880/eureka_ep430.h b/arch/mips/include/asm/rt2880/eureka_ep430.h
+new file mode 100644
+index 0000000..e42a992
+--- /dev/null
++++ b/arch/mips/include/asm/rt2880/eureka_ep430.h
+@@ -0,0 +1,204 @@
++/**************************************************************************
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 675 Mass Ave, Cambridge, MA 02139, USA.
++ *
++ *
++ **************************************************************************
++ */
++
++#ifndef _EUREKA_EP430_H
++#define _EUREKA_EP430_H
++
++
++#include <asm/addrspace.h> /* for KSEG1ADDR() */
++#include <asm/byteorder.h> /* for cpu_to_le32() */
++#include <asm/mach-ralink/rt_mmap.h>
++
++
++/*
++ * Because of an error/peculiarity in the Galileo chip, we need to swap the
++ * bytes when running bigendian.
++ */
++
++#define MV_WRITE(ofs, data) \
++ *(volatile u32 *)(RALINK_PCI_BASE+(ofs)) = cpu_to_le32(data)
++#define MV_READ(ofs, data) \
++ *(data) = le32_to_cpu(*(volatile u32 *)(RALINK_PCI_BASE+(ofs)))
++#define MV_READ_DATA(ofs) \
++ le32_to_cpu(*(volatile u32 *)(RALINK_PCI_BASE+(ofs)))
++
++#define MV_WRITE_16(ofs, data) \
++ *(volatile u16 *)(RALINK_PCI_BASE+(ofs)) = cpu_to_le16(data)
++#define MV_READ_16(ofs, data) \
++ *(data) = le16_to_cpu(*(volatile u16 *)(RALINK_PCI_BASE+(ofs)))
++
++#define MV_WRITE_8(ofs, data) \
++ *(volatile u8 *)(RALINK_PCI_BASE+(ofs)) = data
++#define MV_READ_8(ofs, data) \
++ *(data) = *(volatile u8 *)(RALINK_PCI_BASE+(ofs))
++
++#define MV_SET_REG_BITS(ofs,bits) \
++ (*((volatile u32 *)(RALINK_PCI_BASE+(ofs)))) |= ((u32)cpu_to_le32(bits))
++#define MV_RESET_REG_BITS(ofs,bits) \
++ (*((volatile u32 *)(RALINK_PCI_BASE+(ofs)))) &= ~((u32)cpu_to_le32(bits))
++
++#define RALINK_PCI_CONFIG_ADDR 0x20
++#define RALINK_PCI_CONFIG_DATA_VIRTUAL_REG 0x24
++
++#if defined(CONFIG_RALINK_RT2880) || defined(CONFIG_RALINK_RT2883)
++#define RALINK_PCI_PCICFG_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0000)
++#define RALINK_PCI_PCIRAW_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0004)
++#define RALINK_PCI_PCIINT_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0008)
++#define RALINK_PCI_PCIMSK_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x000C)
++#define RALINK_PCI_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0010)
++#define RALINK_PCI_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0018)
++#define RALINK_PCI_IMBASEBAR1_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x001C)
++#define RALINK_PCI_MEMBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x0028)
++#define RALINK_PCI_IOBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x002C)
++#define RALINK_PCI_ID *(volatile u32 *)(RALINK_PCI_BASE + 0x0030)
++#define RALINK_PCI_CLASS *(volatile u32 *)(RALINK_PCI_BASE + 0x0034)
++#define RALINK_PCI_SUBID *(volatile u32 *)(RALINK_PCI_BASE + 0x0038)
++#define RALINK_PCI_ARBCTL *(volatile u32 *)(RALINK_PCI_BASE + 0x0080)
++#define RALINK_PCI_STATUS *(volatile u32 *)(RALINK_PCI_BASE + 0x0050)
++
++#elif defined(CONFIG_RALINK_RT3883)
++
++#define RALINK_PCI_PCICFG_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0000)
++#define RALINK_PCI_PCIRAW_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0004)
++#define RALINK_PCI_PCIINT_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0008)
++#define RALINK_PCI_PCIMSK_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x000C)
++#define RALINK_PCI_IMBASEBAR1_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x001C)
++#define RALINK_PCI_MEMBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x0028)
++#define RALINK_PCI_IOBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x002C)
++#define RALINK_PCI_ARBCTL *(volatile u32 *)(RALINK_PCI_BASE + 0x0080)
++
++/*
++PCI0 --> PCI
++PCI1 --> PCIe
++*/
++#define RT3883_PCI_OFFSET 0x1000
++#define RT3883_PCIE_OFFSET 0x2000
++
++#define RALINK_PCI0_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCI_OFFSET + 0x0010)
++#define RALINK_PCI0_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCI_OFFSET + 0x0018)
++#define RALINK_PCI0_ID *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCI_OFFSET + 0x0030)
++#define RALINK_PCI0_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCI_OFFSET + 0x0034)
++#define RALINK_PCI0_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCI_OFFSET + 0x0038)
++
++#define RALINK_PCI1_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCIE_OFFSET + 0x0010)
++#define RALINK_PCI1_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCIE_OFFSET + 0x0018)
++#define RALINK_PCI1_ID *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCIE_OFFSET + 0x0030)
++#define RALINK_PCI1_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCIE_OFFSET + 0x0034)
++#define RALINK_PCI1_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCIE_OFFSET + 0x0038)
++#define RALINK_PCI1_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCIE_OFFSET + 0x0050)
++
++#elif defined(CONFIG_RALINK_RT6855) || defined (CONFIG_RALINK_MT7620) || defined(CONFIG_RALINK_MT7628)
++
++#define RALINK_PCI_PCICFG_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0000)
++#define RALINK_PCI_PCIRAW_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0004)
++#define RALINK_PCI_PCIINT_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0008)
++#define RALINK_PCI_PCIMSK_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x000C)
++#define RALINK_PCI_IMBASEBAR1_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x001C)
++#define RALINK_PCI_MEMBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x0028)
++#define RALINK_PCI_IOBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x002C)
++#define RALINK_PCI_ARBCTL *(volatile u32 *)(RALINK_PCI_BASE + 0x0080)
++
++/*
++PCI0 --> PCIe 0
++PCI1 --> PCIe 1
++*/
++#define RT6855_PCIE0_OFFSET 0x2000
++#define RT6855_PCIE1_OFFSET 0x3000
++
++#define RALINK_PCI0_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0010)
++#define RALINK_PCI0_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0018)
++#define RALINK_PCI0_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0030)
++#define RALINK_PCI0_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0034)
++#define RALINK_PCI0_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0038)
++#define RALINK_PCI0_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0050)
++#define RALINK_PCI0_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0060)
++#define RALINK_PCI0_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0064)
++
++#define RALINK_PCI1_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0010)
++#define RALINK_PCI1_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0018)
++#define RALINK_PCI1_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0030)
++#define RALINK_PCI1_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0034)
++#define RALINK_PCI1_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0038)
++#define RALINK_PCI1_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0050)
++#define RALINK_PCI1_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0060)
++#define RALINK_PCI1_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0064)
++
++#elif defined (CONFIG_RALINK_MT7621)
++
++#define RALINK_PCI_PCICFG_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0000)
++#define RALINK_PCI_PCIRAW_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0004)
++#define RALINK_PCI_PCIINT_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0008)
++#define RALINK_PCI_PCIMSK_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x000C)
++#define RALINK_PCI_IMBASEBAR1_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x001C)
++#define RALINK_PCI_MEMBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x0028)
++#define RALINK_PCI_IOBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x002C)
++#define RALINK_PCI_ARBCTL *(volatile u32 *)(RALINK_PCI_BASE + 0x0080)
++
++/*
++PCI0 --> PCIe 0
++PCI1 --> PCIe 1
++PCI2 --> PCIe 2
++*/
++#define RT6855_PCIE0_OFFSET 0x2000
++#define RT6855_PCIE1_OFFSET 0x3000
++#define RT6855_PCIE2_OFFSET 0x4000
++
++#define RALINK_PCI0_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0010)
++#define RALINK_PCI0_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0018)
++#define RALINK_PCI0_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0030)
++#define RALINK_PCI0_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0034)
++#define RALINK_PCI0_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0038)
++#define RALINK_PCI0_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0050)
++#define RALINK_PCI0_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0060)
++#define RALINK_PCI0_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0064)
++
++#define RALINK_PCI1_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0010)
++#define RALINK_PCI1_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0018)
++#define RALINK_PCI1_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0030)
++#define RALINK_PCI1_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0034)
++#define RALINK_PCI1_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0038)
++#define RALINK_PCI1_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0050)
++#define RALINK_PCI1_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0060)
++#define RALINK_PCI1_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0064)
++
++#define RALINK_PCI2_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0010)
++#define RALINK_PCI2_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0018)
++#define RALINK_PCI2_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0030)
++#define RALINK_PCI2_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0034)
++#define RALINK_PCI2_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0038)
++#define RALINK_PCI2_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0050)
++#define RALINK_PCI2_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0060)
++#define RALINK_PCI2_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0064)
++
++#define RALINK_PCIEPHY_P0P1_CTL_OFFSET (RALINK_PCI_BASE + 0x9000)
++#define RALINK_PCIEPHY_P2_CTL_OFFSET (RALINK_PCI_BASE + 0xA000)
++
++#elif defined(CONFIG_RALINK_RT3052) || defined(CONFIG_RALINK_RT3352) || defined(CONFIG_RALINK_RT5350)
++#else
++#error "undefined in PCI"
++#endif
++
++#endif
+diff --git a/arch/mips/include/asm/rt2880/generic.h b/arch/mips/include/asm/rt2880/generic.h
+new file mode 100644
+index 0000000..4128f91
+--- /dev/null
++++ b/arch/mips/include/asm/rt2880/generic.h
+@@ -0,0 +1,42 @@
++/*
++ * Copyright (C) 2001 Palmchip Corporation. All rights reserved.
++ *
++ * This program is free software; you can distribute it and/or modify it
++ * under the terms of the GNU General Public License (Version 2) as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++ *
++ * Defines of the Palmchip boards specific address-MAP, registers, etc.
++ */
++#ifndef __ASM_SURFBOARD_GENERIC_H
++#define __ASM_SURFBOARD_GENERIC_H
++
++#include <asm/addrspace.h>
++#include <asm/byteorder.h>
++#include <asm/mach-ralink/rt_mmap.h>
++
++/*
++ * Reset register.
++ */
++#define SOFTRES_REG (KSEG1ADDR(RALINK_SYSCTL_BASE+0x34))
++#define GORESET (0x1)
++
++/*
++ * Power-off register
++ */
++#define POWER_DIR_REG (KSEG1ADDR(RALINK_PIO_BASE+0x24))
++#define POWER_DIR_OUTPUT (0x80) /* GPIO 7 */
++#define POWER_POL_REG (KSEG1ADDR(RALINK_PIO_BASE+0x28))
++#define POWEROFF_REG (KSEG1ADDR(RALINK_PIO_BASE+0x20))
++#define POWEROFF (0x0) /* drive low */
++
++
++#endif /* __ASM_SURFBOARD_GENERIC_H */
+diff --git a/arch/mips/include/asm/rt2880/lm.h b/arch/mips/include/asm/rt2880/lm.h
+new file mode 100644
+index 0000000..25e2930
+--- /dev/null
++++ b/arch/mips/include/asm/rt2880/lm.h
+@@ -0,0 +1,32 @@
++#include <linux/version.h>
++
++struct lm_device {
++ struct device dev;
++ struct resource resource;
++ unsigned int irq;
++ unsigned int id;
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ void *lm_drvdata;
++#endif
++};
++
++struct lm_driver {
++ struct device_driver drv;
++ int (*probe)(struct lm_device *);
++ void (*remove)(struct lm_device *);
++ int (*suspend)(struct lm_device *, u32);
++ int (*resume)(struct lm_device *);
++};
++
++int lm_driver_register(struct lm_driver *drv);
++void lm_driver_unregister(struct lm_driver *drv);
++
++int lm_device_register(struct lm_device *dev);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++# define lm_get_drvdata(lm) ((lm)->lm_drvdata)
++# define lm_set_drvdata(lm,d) do { (lm)->lm_drvdata = (d); } while (0)
++#else
++# define lm_get_drvdata(lm) dev_get_drvdata(&(lm)->dev)
++# define lm_set_drvdata(lm,d) dev_set_drvdata(&(lm)->dev, d)
++#endif
+diff --git a/arch/mips/include/asm/rt2880/prom.h b/arch/mips/include/asm/rt2880/prom.h
+new file mode 100644
+index 0000000..51be9b0
+--- /dev/null
++++ b/arch/mips/include/asm/rt2880/prom.h
+@@ -0,0 +1,50 @@
++/*
++ * Carsten Langgaard, carstenl@mips.com
++ * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
++ *
++ * ########################################################################
++ *
++ * This program is free software; you can distribute it and/or modify it
++ * under the terms of the GNU General Public License (Version 2) as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++ *
++ * ########################################################################
++ *
++ * MIPS boards bootprom interface for the Linux kernel.
++ *
++ */
++
++#ifndef _MIPS_PROM_H
++#define _MIPS_PROM_H
++
++extern char *prom_getcmdline(void);
++extern char *prom_getenv(char *name);
++extern void setup_prom_printf(int tty_no);
++extern void prom_setup_printf(int tty_no);
++extern void prom_printf(char *fmt, ...);
++extern void prom_init_cmdline(void);
++extern void prom_meminit(void);
++extern void prom_fixup_mem_map(unsigned long start_mem, unsigned long end_mem);
++extern void prom_free_prom_memory (void);
++extern void mips_display_message(const char *str);
++extern void mips_display_word(unsigned int num);
++extern int get_ethernet_addr(char *ethernet_addr);
++
++/* Memory descriptor management. */
++#define PROM_MAX_PMEMBLOCKS 32
++struct prom_pmemblock {
++ unsigned long base; /* Within KSEG0. */
++ unsigned int size; /* In bytes. */
++ unsigned int type; /* free or prom memory */
++};
++
++#endif /* !(_MIPS_PROM_H) */
+diff --git a/arch/mips/include/asm/rt2880/rt_mmap.h b/arch/mips/include/asm/rt2880/rt_mmap.h
+new file mode 100644
+index 0000000..0e8f051
+--- /dev/null
++++ b/arch/mips/include/asm/rt2880/rt_mmap.h
+@@ -0,0 +1,796 @@
++/**************************************************************************
++ *
++ * BRIEF MODULE DESCRIPTION
++ * register definition for Ralink RT-series SoC
++ *
++ * Copyright 2007 Ralink Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 675 Mass Ave, Cambridge, MA 02139, USA.
++ *
++ *
++ **************************************************************************
++ */
++
++#ifndef __RALINK_MMAP__
++#define __RALINK_MMAP__
++
++#if defined (CONFIG_RALINK_RT2880_SHUTTLE)
++
++#define RALINK_SYSCTL_BASE 0xA0300000
++#define RALINK_TIMER_BASE 0xA0300100
++#define RALINK_INTCL_BASE 0xA0300200
++#define RALINK_MEMCTRL_BASE 0xA0300300
++#define RALINK_UART_BASE 0xA0300500
++#define RALINK_PIO_BASE 0xA0300600
++#define RALINK_I2C_BASE 0xA0300900
++#define RALINK_SPI_BASE 0xA0300B00
++#define RALINK_UART_LITE_BASE 0xA0300C00
++#define RALINK_FRAME_ENGINE_BASE 0xA0310000
++#define RALINK_EMBEDD_ROM_BASE 0xA0400000
++#define RALINK_PCI_BASE 0xA0500000
++#define RALINK_11N_MAC_BASE 0xA0600000
++
++//Interrupt Controller
++#define RALINK_INTCTL_TIMER0 (1<<0)
++#define RALINK_INTCTL_WDTIMER (1<<1)
++#define RALINK_INTCTL_UART (1<<2)
++#define RALINK_INTCTL_PIO (1<<3)
++#define RALINK_INTCTL_PCM (1<<4)
++#define RALINK_INTCTL_UARTLITE (1<<8)
++#define RALINK_INTCTL_ILL_ACCESS (1<<23)
++
++//Reset Control Register
++#define RALINK_TIMER_RST (1<<1)
++#define RALINK_INTC_RST (1<<2)
++#define RALINK_MC_RST (1<<3)
++#define RALINK_CPU_RST (1<<4)
++#define RALINK_UART_RST (1<<5)
++#define RALINK_PIO_RST (1<<6)
++#define RALINK_I2C_RST (1<<9)
++#define RALINK_SPI_RST (1<<11)
++#define RALINK_UART2_RST (1<<12)
++#define RALINK_PCI_RST (1<<16)
++#define RALINK_2860_RST (1<<17)
++#define RALINK_FE_RST (1<<18)
++#define RALINK_PCM_RST (1<<19)
++
++
++#elif defined (CONFIG_RALINK_RT2880_MP)
++
++#define RALINK_SYSCTL_BASE 0xA0300000
++#define RALINK_TIMER_BASE 0xA0300100
++#define RALINK_INTCL_BASE 0xA0300200
++#define RALINK_MEMCTRL_BASE 0xA0300300
++#define RALINK_UART_BASE 0xA0300500
++#define RALINK_PIO_BASE 0xA0300600
++#define RALINK_I2C_BASE 0xA0300900
++#define RALINK_SPI_BASE 0xA0300B00
++#define RALINK_UART_LITE_BASE 0x00300C00
++#define RALINK_FRAME_ENGINE_BASE 0xA0400000
++#define RALINK_EMBEDD_ROM_BASE 0xA0410000
++#define RALINK_PCI_BASE 0xA0440000
++#define RALINK_11N_MAC_BASE 0xA0480000
++
++//Interrupt Controller
++#define RALINK_INTCTL_TIMER0 (1<<0)
++#define RALINK_INTCTL_WDTIMER (1<<1)
++#define RALINK_INTCTL_UART (1<<2)
++#define RALINK_INTCTL_PIO (1<<3)
++#define RALINK_INTCTL_PCM (1<<4)
++#define RALINK_INTCTL_UARTLITE (1<<8)
++#define RALINK_INTCTL_ILL_ACCESS (1<<23)
++
++//Reset Control Register
++#define RALINK_TIMER_RST (1<<1)
++#define RALINK_INTC_RST (1<<2)
++#define RALINK_MC_RST (1<<3)
++#define RALINK_CPU_RST (1<<4)
++#define RALINK_UART_RST (1<<5)
++#define RALINK_PIO_RST (1<<6)
++#define RALINK_I2C_RST (1<<9)
++#define RALINK_SPI_RST (1<<11)
++#define RALINK_UART2_RST (1<<12)
++#define RALINK_PCI_RST (1<<16)
++#define RALINK_2860_RST (1<<17)
++#define RALINK_FE_RST (1<<18)
++#define RALINK_PCM_RST (1<<19)
++
++#elif defined (CONFIG_RALINK_RT3052)
++
++#define RALINK_SYSCTL_BASE 0xB0000000
++#define RALINK_TIMER_BASE 0xB0000100
++#define RALINK_INTCL_BASE 0xB0000200
++#define RALINK_MEMCTRL_BASE 0xB0000300
++#define RALINK_PCM_BASE 0xB0000400
++#define RALINK_UART_BASE 0x10000500
++#define RALINK_PIO_BASE 0xB0000600
++#define RALINK_GDMA_BASE 0xB0000700
++#define RALINK_NAND_CTRL_BASE 0xB0000800
++#define RALINK_I2C_BASE 0xB0000900
++#define RALINK_I2S_BASE 0xB0000A00
++#define RALINK_SPI_BASE 0xB0000B00
++#define RALINK_UART_LITE_BASE 0x10000C00
++#define RALINK_FRAME_ENGINE_BASE 0xB0100000
++#define RALINK_ETH_SW_BASE 0xB0110000
++#define RALINK_11N_MAC_BASE 0xB0180000
++#define RALINK_USB_OTG_BASE 0x101C0000
++
++//Interrupt Controller
++#define RALINK_INTCTL_SYSCTL (1<<0)
++#define RALINK_INTCTL_TIMER0 (1<<1)
++#define RALINK_INTCTL_WDTIMER (1<<2)
++#define RALINK_INTCTL_ILL_ACCESS (1<<3)
++#define RALINK_INTCTL_PCM (1<<4)
++#define RALINK_INTCTL_UART (1<<5)
++#define RALINK_INTCTL_PIO (1<<6)
++#define RALINK_INTCTL_DMA (1<<7)
++#define RALINK_INTCTL_NAND (1<<8)
++#define RALINK_INTCTL_PC (1<<9)
++#define RALINK_INTCTL_I2S (1<<10)
++#define RALINK_INTCTL_UARTLITE (1<<12)
++#define RALINK_INTCTL_ESW (1<<17)
++#define RALINK_INTCTL_OTG (1<<18)
++#define RALINK_INTCTL_OTG_IRQN 18
++#define RALINK_INTCTL_GLOBAL (1<<31)
++
++//Reset Control Register
++#define RALINK_SYS_RST (1<<0)
++#define RALINK_CPU_RST (1<<1)
++#define RALINK_TIMER_RST (1<<8)
++#define RALINK_INTC_RST (1<<9)
++#define RALINK_MC_RST (1<<10)
++#define RALINK_PCM_RST (1<<11)
++#define RALINK_UART_RST (1<<12)
++#define RALINK_PIO_RST (1<<13)
++#define RALINK_DMA_RST (1<<14)
++#define RALINK_I2C_RST (1<<16)
++#define RALINK_I2S_RST (1<<17)
++#define RALINK_SPI_RST (1<<18)
++#define RALINK_UARTL_RST (1<<19)
++#define RALINK_RT2872_RST (1<<20)
++#define RALINK_FE_RST (1<<21)
++#define RALINK_OTG_RST (1<<22)
++#define RALINK_SW_RST (1<<23)
++#define RALINK_EPHY_RST (1<<24)
++
++#elif defined (CONFIG_RALINK_RT3352)
++
++#define RALINK_SYSCTL_BASE 0xB0000000
++#define RALINK_TIMER_BASE 0xB0000100
++#define RALINK_INTCL_BASE 0xB0000200
++#define RALINK_MEMCTRL_BASE 0xB0000300
++#define RALINK_UART_BASE 0x10000500
++#define RALINK_PIO_BASE 0xB0000600
++#define RALINK_I2C_BASE 0xB0000900
++#define RALINK_I2S_BASE 0xB0000A00
++#define RALINK_SPI_BASE 0xB0000B00
++#define RALINK_NAND_CTRL_BASE 0xB0000800
++#define RALINK_UART_LITE_BASE 0x10000C00
++#define RALINK_PCM_BASE 0xB0002000
++#define RALINK_GDMA_BASE 0xB0002800
++#define RALINK_FRAME_ENGINE_BASE 0xB0100000
++#define RALINK_ETH_SW_BASE 0xB0110000
++#define RALINK_USB_DEV_BASE 0x10120000
++#define RALINK_11N_MAC_BASE 0xB0180000
++#define RALINK_USB_HOST_BASE 0x101C0000
++
++#define RALINK_MCNT_CFG 0xB0000D00
++#define RALINK_COMPARE 0xB0000D04
++#define RALINK_COUNT 0xB0000D08
++
++//Interrupt Controller
++#define RALINK_INTCTL_SYSCTL (1<<0)
++#define RALINK_INTCTL_TIMER0 (1<<1)
++#define RALINK_INTCTL_WDTIMER (1<<2)
++#define RALINK_INTCTL_ILL_ACCESS (1<<3)
++#define RALINK_INTCTL_PCM (1<<4)
++#define RALINK_INTCTL_UART (1<<5)
++#define RALINK_INTCTL_PIO (1<<6)
++#define RALINK_INTCTL_DMA (1<<7)
++#define RALINK_INTCTL_PC (1<<9)
++#define RALINK_INTCTL_I2S (1<<10)
++#define RALINK_INTCTL_UARTLITE (1<<12)
++#define RALINK_INTCTL_ESW (1<<17)
++#define RALINK_INTCTL_OTG (1<<18)
++#define RALINK_INTCTL_GLOBAL (1<<31)
++
++//Reset Control Register
++#define RALINK_SYS_RST (1<<0)
++#define RALINK_TIMER_RST (1<<8)
++#define RALINK_INTC_RST (1<<9)
++#define RALINK_MC_RST (1<<10)
++#define RALINK_PCM_RST (1<<11)
++#define RALINK_UART_RST (1<<12)
++#define RALINK_PIO_RST (1<<13)
++#define RALINK_DMA_RST (1<<14)
++#define RALINK_I2C_RST (1<<16)
++#define RALINK_I2S_RST (1<<17)
++#define RALINK_SPI_RST (1<<18)
++#define RALINK_UARTL_RST (1<<19)
++#define RALINK_WLAN_RST (1<<20)
++#define RALINK_FE_RST (1<<21)
++#define RALINK_UHST_RST (1<<22)
++#define RALINK_ESW_RST (1<<23)
++#define RALINK_EPHY_RST (1<<24)
++#define RALINK_UDEV_RST (1<<25)
++
++
++//Clock Conf Register
++#define RALINK_UPHY1_CLK_EN (1<<20)
++#define RALINK_UPHY0_CLK_EN (1<<18)
++#define RALINK_GE1_CLK_EN (1<<16)
++
++
++#elif defined (CONFIG_RALINK_RT5350)
++
++#define RALINK_SYSCTL_BASE 0xB0000000
++#define RALINK_TIMER_BASE 0xB0000100
++#define RALINK_INTCL_BASE 0xB0000200
++#define RALINK_MEMCTRL_BASE 0xB0000300
++#define RALINK_UART_BASE 0x10000500
++#define RALINK_PIO_BASE 0xB0000600
++#define RALINK_I2C_BASE 0xB0000900
++#define RALINK_I2S_BASE 0xB0000A00
++#define RALINK_SPI_BASE 0xB0000B00
++#define RALINK_UART_LITE_BASE 0x10000C00
++#define RALINK_PCM_BASE 0xB0002000
++#define RALINK_GDMA_BASE 0xB0002800
++#define RALINK_FRAME_ENGINE_BASE 0xB0100000
++#define RALINK_ETH_SW_BASE 0xB0110000
++#define RALINK_USB_DEV_BASE 0x10120000
++#define RALINK_11N_MAC_BASE 0xB0180000
++#define RALINK_USB_HOST_BASE 0x101C0000
++
++#define RALINK_MCNT_CFG 0xB0000D00
++#define RALINK_COMPARE 0xB0000D04
++#define RALINK_COUNT 0xB0000D08
++
++//Interrupt Controller
++#define RALINK_INTCTL_SYSCTL (1<<0)
++#define RALINK_INTCTL_TIMER0 (1<<1)
++#define RALINK_INTCTL_WDTIMER (1<<2)
++#define RALINK_INTCTL_ILL_ACCESS (1<<3)
++#define RALINK_INTCTL_PCM (1<<4)
++#define RALINK_INTCTL_UART (1<<5)
++#define RALINK_INTCTL_PIO (1<<6)
++#define RALINK_INTCTL_DMA (1<<7)
++#define RALINK_INTCTL_PC (1<<9)
++#define RALINK_INTCTL_I2S (1<<10)
++#define RALINK_INTCTL_UARTLITE (1<<12)
++#define RALINK_INTCTL_ESW (1<<17)
++#define RALINK_INTCTL_USB_HOST (1<<18)
++#define RALINK_INTCTL_USB_DEV (1<<19)
++#define RALINK_INTCTL_GLOBAL (1<<31)
++
++//Reset Control Register
++#define RALINK_SYS_RST (1<<0)
++#define RALINK_TIMER_RST (1<<8)
++#define RALINK_INTC_RST (1<<9)
++#define RALINK_MC_RST (1<<10)
++#define RALINK_PCM_RST (1<<11)
++#define RALINK_UART_RST (1<<12)
++#define RALINK_PIO_RST (1<<13)
++#define RALINK_DMA_RST (1<<14)
++#define RALINK_I2C_RST (1<<16)
++#define RALINK_I2S_RST (1<<17)
++#define RALINK_SPI_RST (1<<18)
++#define RALINK_UARTL_RST (1<<19)
++#define RALINK_WLAN_RST (1<<20)
++#define RALINK_FE_RST (1<<21)
++#define RALINK_UHST_RST (1<<22)
++#define RALINK_ESW_RST (1<<23)
++#define RALINK_EPHY_RST (1<<24)
++#define RALINK_UDEV_RST (1<<25)
++#define RALINK_MIPSC_RST (1<<28)
++
++//Clock Conf Register
++#define RALINK_UPHY0_CLK_EN (1<<18)
++#define RALINK_GE1_CLK_EN (1<<16)
++
++#elif defined (CONFIG_RALINK_RT2883)
++
++#define RALINK_SYSCTL_BASE 0xB0000000
++#define RALINK_TIMER_BASE 0xB0000100
++#define RALINK_INTCL_BASE 0xB0000200
++#define RALINK_MEMCTRL_BASE 0xB0000300
++#define RALINK_PCM_BASE 0xB0000400
++#define RALINK_UART_BASE 0x10000500
++#define RALINK_PIO_BASE 0xB0000600
++#define RALINK_GDMA_BASE 0xB0000700
++#define RALINK_NAND_CTRL_BASE 0xB0000800
++#define RALINK_I2C_BASE 0xB0000900
++#define RALINK_I2S_BASE 0xB0000A00
++#define RALINK_SPI_BASE 0xB0000B00
++#define RALINK_UART_LITE_BASE 0x10000C00
++#define RALINK_FRAME_ENGINE_BASE 0xB0100000
++#define RALINK_PCI_BASE 0xB0140000
++#define RALINK_11N_MAC_BASE 0xB0180000
++#define RALINK_USB_OTG_BASE 0x101C0000
++
++//Interrupt Controller
++#define RALINK_INTCTL_SYSCTL (1<<0)
++#define RALINK_INTCTL_TIMER0 (1<<1)
++#define RALINK_INTCTL_WDTIMER (1<<2)
++#define RALINK_INTCTL_ILL_ACCESS (1<<3)
++#define RALINK_INTCTL_PCM (1<<4)
++#define RALINK_INTCTL_UART (1<<5)
++#define RALINK_INTCTL_PIO (1<<6)
++#define RALINK_INTCTL_DMA (1<<7)
++#define RALINK_INTCTL_NAND (1<<8)
++#define RALINK_INTCTL_PC (1<<9)
++#define RALINK_INTCTL_I2S (1<<10)
++#define RALINK_INTCTL_UARTLITE (1<<12)
++#define RALINK_INTCTL_OTG (1<<18)
++#define RALINK_INTCTL_OTG_IRQN 18
++#define RALINK_INTCTL_GLOBAL (1<<31)
++
++//Reset Control Register
++#define RALINK_SYS_RST (1<<0)
++#define RALINK_CPU_RST (1<<1)
++#define RALINK_TIMER_RST (1<<8)
++#define RALINK_INTC_RST (1<<9)
++#define RALINK_MC_RST (1<<10)
++#define RALINK_PCM_RST (1<<11)
++#define RALINK_UART_RST (1<<12)
++#define RALINK_PIO_RST (1<<13)
++#define RALINK_DMA_RST (1<<14)
++#define RALINK_I2C_RST (1<<16)
++#define RALINK_I2S_RST (1<<17)
++#define RALINK_SPI_RST (1<<18)
++#define RALINK_UARTL_RST (1<<19)
++#define RALINK_WLAN_RST (1<<20)
++#define RALINK_FE_RST (1<<21)
++#define RALINK_OTG_RST (1<<22)
++#define RALINK_PCIE_RST (1<<23)
++
++#elif defined (CONFIG_RALINK_RT3883)
++
++#define RALINK_SYSCTL_BASE 0xB0000000
++#define RALINK_TIMER_BASE 0xB0000100
++#define RALINK_INTCL_BASE 0xB0000200
++#define RALINK_MEMCTRL_BASE 0xB0000300
++#define RALINK_UART_BASE 0x10000500
++#define RALINK_PIO_BASE 0xB0000600
++#define RALINK_NOR_CTRL_BASE 0xB0000700
++#define RALINK_NAND_CTRL_BASE 0xB0000810
++#define RALINK_I2C_BASE 0xB0000900
++#define RALINK_I2S_BASE 0xB0000A00
++#define RALINK_SPI_BASE 0xB0000B00
++#define RALINK_UART_LITE_BASE 0x10000C00
++#define RALINK_PCM_BASE 0xB0002000
++#define RALINK_GDMA_BASE 0xB0002800
++#define RALINK_CODEC1_BASE 0xB0003000
++#define RALINK_CODEC2_BASE 0xB0003800
++#define RALINK_FRAME_ENGINE_BASE 0xB0100000
++#define RALINK_USB_DEV_BASE 0x10120000
++#define RALINK_PCI_BASE 0xB0140000
++#define RALINK_11N_MAC_BASE 0xB0180000
++#define RALINK_USB_HOST_BASE 0x101C0000
++#define RALINK_PCIE_BASE 0xB0200000
++
++//Interrupt Controller
++#define RALINK_INTCTL_SYSCTL (1<<0)
++#define RALINK_INTCTL_TIMER0 (1<<1)
++#define RALINK_INTCTL_WDTIMER (1<<2)
++#define RALINK_INTCTL_ILL_ACCESS (1<<3)
++#define RALINK_INTCTL_PCM (1<<4)
++#define RALINK_INTCTL_UART (1<<5)
++#define RALINK_INTCTL_PIO (1<<6)
++#define RALINK_INTCTL_DMA (1<<7)
++#define RALINK_INTCTL_NAND (1<<8)
++#define RALINK_INTCTL_PC (1<<9)
++#define RALINK_INTCTL_I2S (1<<10)
++#define RALINK_INTCTL_UARTLITE (1<<12)
++#define RALINK_INTCTL_UHST (1<<18)
++#define RALINK_INTCTL_UDEV (1<<19)
++
++//Reset Control Register
++#define RALINK_SYS_RST (1<<0)
++#define RALINK_TIMER_RST (1<<8)
++#define RALINK_INTC_RST (1<<9)
++#define RALINK_MC_RST (1<<10)
++#define RALINK_PCM_RST (1<<11)
++#define RALINK_UART_RST (1<<12)
++#define RALINK_PIO_RST (1<<13)
++#define RALINK_DMA_RST (1<<14)
++#define RALINK_NAND_RST (1<<15)
++#define RALINK_I2C_RST (1<<16)
++#define RALINK_I2S_RST (1<<17)
++#define RALINK_SPI_RST (1<<18)
++#define RALINK_UARTL_RST (1<<19)
++#define RALINK_WLAN_RST (1<<20)
++#define RALINK_FE_RST (1<<21)
++#define RALINK_UHST_RST (1<<22)
++#define RALINK_PCIE_RST (1<<23)
++#define RALINK_PCI_RST (1<<24)
++#define RALINK_UDEV_RST (1<<25)
++#define RALINK_FLASH_RST (1<<26)
++
++//Clock Conf Register
++#define RALINK_UPHY1_CLK_EN (1<<20)
++#define RALINK_UPHY0_CLK_EN (1<<18)
++#define RALINK_GE1_CLK_EN (1<<16)
++
++#elif defined (CONFIG_RALINK_RT6855)
++
++#define RALINK_SYSCTL_BASE 0xB0000000
++#define RALINK_TIMER_BASE 0xB0000100
++#define RALINK_INTCL_BASE 0xB0000200
++#define RALINK_MEMCTRL_BASE 0xB0000300
++#define RALINK_UART_BASE 0x10000500
++#define RALINK_PIO_BASE 0xB0000600
++#define RALINK_I2C_BASE 0xB0000900
++#define RALINK_I2S_BASE 0xB0000A00
++#define RALINK_SPI_BASE 0xB0000B00
++#define RALINK_NAND_CTRL_BASE 0xB0000800
++#define RALINK_UART_LITE_BASE 0x10000C00
++#define RALINK_PCM_BASE 0xB0002000
++#define RALINK_GDMA_BASE 0xB0002800
++#define RALINK_FRAME_ENGINE_BASE 0xB0100000
++#define RALINK_ETH_SW_BASE 0xB0110000
++#define RALINK_PCI_BASE 0xB0140000
++#define RALINK_USB_DEV_BASE 0x10120000
++#define RALINK_11N_MAC_BASE 0xB0180000
++#define RALINK_USB_HOST_BASE 0x101C0000
++
++#define RALINK_MCNT_CFG 0xB0000D00
++#define RALINK_COMPARE 0xB0000D04
++#define RALINK_COUNT 0xB0000D08
++
++//Interrupt Controller
++#define RALINK_INTCTL_SYSCTL (1<<0)
++#define RALINK_INTCTL_TIMER0 (1<<1)
++#define RALINK_INTCTL_WDTIMER (1<<2)
++#define RALINK_INTCTL_ILL_ACCESS (1<<3)
++#define RALINK_INTCTL_PCM (1<<4)
++#define RALINK_INTCTL_UART (1<<5)
++#define RALINK_INTCTL_PIO (1<<6)
++#define RALINK_INTCTL_DMA (1<<7)
++#define RALINK_INTCTL_PC (1<<9)
++#define RALINK_INTCTL_I2S (1<<10)
++#define RALINK_INTCTL_UARTLITE (1<<12)
++#define RALINK_INTCTL_ESW (1<<17)
++#define RALINK_INTCTL_OTG (1<<18)
++#define RALINK_INTCTL_GLOBAL (1<<31)
++
++//Reset Control Register
++#define RALINK_SYS_RST (1<<0)
++#define RALINK_TIMER_RST (1<<8)
++#define RALINK_INTC_RST (1<<9)
++#define RALINK_MC_RST (1<<10)
++#define RALINK_PCM_RST (1<<11)
++#define RALINK_UART_RST (1<<12)
++#define RALINK_PIO_RST (1<<13)
++#define RALINK_DMA_RST (1<<14)
++#define RALINK_I2C_RST (1<<16)
++#define RALINK_I2S_RST (1<<17)
++#define RALINK_SPI_RST (1<<18)
++#define RALINK_UARTL_RST (1<<19)
++#define RALINK_FE_RST (1<<21)
++#define RALINK_UHST_RST (1<<22)
++#define RALINK_ESW_RST (1<<23)
++#define RALINK_EPHY_RST (1<<24)
++#define RALINK_UDEV_RST (1<<25)
++#define RALINK_PCIE0_RST (1<<26)
++#define RALINK_PCIE1_RST (1<<27)
++
++//Clock Conf Register
++#define RALINK_UPHY0_CLK_EN (1<<25)
++#define RALINK_PCIE0_CLK_EN (1<<26)
++#define RALINK_PCIE1_CLK_EN (1<<27)
++
++
++#elif defined (CONFIG_RALINK_MT7620)
++
++#define RALINK_SYSCTL_BASE 0xB0000000
++#define RALINK_TIMER_BASE 0xB0000100
++#define RALINK_INTCL_BASE 0xB0000200
++#define RALINK_MEMCTRL_BASE 0xB0000300
++#define RALINK_RBUS_MATRIXCTL_BASE 0xB0000400
++#define RALINK_UART_BASE 0x10000500
++#define RALINK_PIO_BASE 0xB0000600
++#define RALINK_NAND_CTRL_BASE 0xB0000810
++#define RALINK_I2C_BASE 0xB0000900
++#define RALINK_I2S_BASE 0xB0000A00
++#define RALINK_SPI_BASE 0xB0000B00
++#define RALINK_UART_LITE_BASE 0x10000C00
++#define RALINK_MIPS_CNT_BASE 0x10000D00
++#define RALINK_PCM_BASE 0xB0002000
++#define RALINK_GDMA_BASE 0xB0002800
++#define RALINK_CRYPTO_ENGINE_BASE 0xB0004000
++#define RALINK_FRAME_ENGINE_BASE 0xB0100000
++#define RALINK_PPE_BASE 0xB0100C00
++#define RALINK_ETH_SW_BASE 0xB0110000
++#define RALINK_USB_DEV_BASE 0x10120000
++#define RALINK_MSDC_BASE 0xB0130000
++#define RALINK_PCI_BASE 0xB0140000
++#define RALINK_11N_MAC_BASE 0xB0180000
++#define RALINK_USB_HOST_BASE 0x101C0000
++
++#define RALINK_MCNT_CFG 0xB0000D00
++#define RALINK_COMPARE 0xB0000D04
++#define RALINK_COUNT 0xB0000D08
++
++//Interrupt Controller
++#define RALINK_INTCTL_SYSCTL (1<<0)
++#define RALINK_INTCTL_TIMER0 (1<<1)
++#define RALINK_INTCTL_WDTIMER (1<<2)
++#define RALINK_INTCTL_ILL_ACCESS (1<<3)
++#define RALINK_INTCTL_PCM (1<<4)
++#define RALINK_INTCTL_UART (1<<5)
++#define RALINK_INTCTL_PIO (1<<6)
++#define RALINK_INTCTL_DMA (1<<7)
++#define RALINK_INTCTL_PC (1<<9)
++#define RALINK_INTCTL_I2S (1<<10)
++#define RALINK_INTCTL_SPI (1<<11)
++#define RALINK_INTCTL_UARTLITE (1<<12)
++#define RALINK_INTCTL_CRYPTO (1<<13)
++#define RALINK_INTCTL_ESW (1<<17)
++#define RALINK_INTCTL_UHST (1<<18)
++#define RALINK_INTCTL_UDEV (1<<19)
++#define RALINK_INTCTL_GLOBAL (1<<31)
++
++//Reset Control Register
++#define RALINK_SYS_RST (1<<0)
++#define RALINK_TIMER_RST (1<<8)
++#define RALINK_INTC_RST (1<<9)
++#define RALINK_MC_RST (1<<10)
++#define RALINK_PCM_RST (1<<11)
++#define RALINK_UART_RST (1<<12)
++#define RALINK_PIO_RST (1<<13)
++#define RALINK_DMA_RST (1<<14)
++#define RALINK_I2C_RST (1<<16)
++#define RALINK_I2S_RST (1<<17)
++#define RALINK_SPI_RST (1<<18)
++#define RALINK_UARTL_RST (1<<19)
++#define RALINK_FE_RST (1<<21)
++#define RALINK_UHST_RST (1<<22)
++#define RALINK_ESW_RST (1<<23)
++#define RALINK_EPHY_RST (1<<24)
++#define RALINK_UDEV_RST (1<<25)
++#define RALINK_PCIE0_RST (1<<26)
++#define RALINK_PCIE1_RST (1<<27)
++#define RALINK_MIPS_CNT_RST (1<<28)
++#define RALINK_CRYPTO_RST (1<<29)
++
++//Clock Conf Register
++#define RALINK_UPHY0_CLK_EN (1<<25)
++#define RALINK_UPHY1_CLK_EN (1<<22)
++#define RALINK_PCIE0_CLK_EN (1<<26)
++#define RALINK_PCIE1_CLK_EN (1<<27)
++
++//CPU PLL CFG Register
++#define CPLL_SW_CONFIG (0x1UL << 31)
++#define CPLL_MULT_RATIO_SHIFT 16
++#define CPLL_MULT_RATIO (0x7UL << CPLL_MULT_RATIO_SHIFT)
++#define CPLL_DIV_RATIO_SHIFT 10
++#define CPLL_DIV_RATIO (0x3UL << CPLL_DIV_RATIO_SHIFT)
++#define BASE_CLOCK 40 /* Mhz */
++
++#elif defined (CONFIG_RALINK_MT7621)
++
++#define RALINK_SYSCTL_BASE 0xBE000000
++#define RALINK_TIMER_BASE 0xBE000100
++#define RALINK_INTCL_BASE 0xBE000200
++#define RALINK_RBUS_MATRIXCTL_BASE 0xBE000400
++#define RALINK_MIPS_CNT_BASE 0x1E000500
++#define RALINK_PIO_BASE 0xBE000600
++#define RALINK_SPDIF_BASE 0xBE000700
++#define RALINK_I2C_BASE 0xBE000900
++#define RALINK_I2S_BASE 0xBE000A00
++#define RALINK_SPI_BASE 0xBE000B00
++#define RALINK_UART_LITE1_BASE 0x1E000C00
++#define RALINK_UART_LITE_BASE RALINK_UART_LITE1_BASE
++#define RALINK_UART_LITE2_BASE 0x1E000D00
++#define RALINK_UART_BASE RALINK_UART_LITE2_BASE
++#define RALINK_UART_LITE3_BASE 0x1E000E00
++#define RALINK_ANA_CTRL_BASE 0xBE000F00
++#define RALINK_PCM_BASE 0xBE002000
++#define RALINK_GDMA_BASE 0xBE002800
++#define RALINK_NAND_CTRL_BASE 0xBE003000
++#define RALINK_NANDECC_CTRL_BASE 0xBE003800
++#define RALINK_CRYPTO_ENGINE_BASE 0xBE004000
++#define RALINK_MEMCTRL_BASE 0xBE005000
++#define RALINK_EXT_MC_ARB_BASE 0xBE006000
++#define RALINK_HS_DMA_BASE 0xBE007000
++#define RALINK_FRAME_ENGINE_BASE 0xBE100000
++#define RALINK_PPE_BASE 0xBE100C00
++#define RALINK_ETH_SW_BASE 0xBE110000
++#define RALINK_ROM_BASE 0xBE118000
++#define RALINK_MSDC_BASE 0xBE130000
++#define RALINK_PCI_BASE 0xBE140000
++#define RALINK_USB_HOST_BASE 0x1E1C0000
++#define RALINK_11N_MAC_BASE 0xBE180000 //Unused
++
++#define RALINK_MCNT_CFG 0xBE000500
++#define RALINK_COMPARE 0xBE000504
++#define RALINK_COUNT 0xBE000508
++
++//Interrupt Controller
++#define RALINK_INTCTL_FE (1<<3)
++#define RALINK_INTCTL_PCIE0 (1<<4)
++#define RALINK_INTCTL_SYSCTL (1<<6)
++#define RALINK_INTCTL_I2C (1<<8)
++#define RALINK_INTCTL_DRAMC (1<<9)
++#define RALINK_INTCTL_PCM (1<<10)
++#define RALINK_INTCTL_HSDMA (1<<11)
++#define RALINK_INTCTL_PIO (1<<12)
++#define RALINK_INTCTL_DMA (1<<13)
++#define RALINK_INTCTL_NFI (1<<14)
++#define RALINK_INTCTL_NFIECC (1<<15)
++#define RALINK_INTCTL_I2S (1<<16)
++#define RALINK_INTCTL_SPI (1<<17)
++#define RALINK_INTCTL_SPDIF (1<<18)
++#define RALINK_INTCTL_CRYPTO (1<<19)
++#define RALINK_INTCTL_SDXC (1<<20)
++#define RALINK_INTCTL_PCTRL (1<<21)
++#define RALINK_INTCTL_USB (1<<22)
++#define RALINK_INTCTL_SWITCH (1<<23)
++#define RALINK_INTCTL_PCIE1 (1<<24)
++#define RALINK_INTCTL_PCIE2 (1<<25)
++#define RALINK_INTCTL_UART1 (1<<26)
++#define RALINK_INTCTL_UART2 (1<<27)
++#define RALINK_INTCTL_UART3 (1<<28)
++#define RALINK_INTCTL_WDTIMER (1<<29)
++#define RALINK_INTCTL_TIMER0 (1<<30)
++#define RALINK_INTCTL_TIMER1 (1<<31)
++
++
++//Reset Control Register
++#define RALINK_SYS_RST (1<<0)
++#define RALINK_MCM_RST (1<<1)
++#define RALINK_HSDMA_RST (1<<2)
++#define RALINK_FE_RST (1<<6)
++#define RALINK_SPDIF_RST (1<<7)
++#define RALINK_TIMER_RST (1<<8)
++#define RALINK_INTC_RST (1<<9)
++#define RALINK_MC_RST (1<<10)
++#define RALINK_PCM_RST (1<<11)
++#define RALINK_PIO_RST (1<<13)
++#define RALINK_DMA_RST (1<<14)
++#define RALINK_NAND_RST (1<<15)
++#define RALINK_I2C_RST (1<<16)
++#define RALINK_I2S_RST (1<<17)
++#define RALINK_SPI_RST (1<<18)
++#define RALINK_UART1_RST (1<<19)
++#define RALINK_UART2_RST (1<<20)
++#define RALINK_UART3_RST (1<<21)
++#define RALINK_ETH_RST (1<<23)
++#define RALINK_PCIE0_RST (1<<24)
++#define RALINK_PCIE1_RST (1<<25)
++#define RALINK_PCIE2_RST (1<<26)
++#define RALINK_AUX_STCK_RST (1<<28)
++#define RALINK_CRYPTO_RST (1<<29)
++#define RALINK_SDXC_RST (1<<30)
++#define RALINK_PPE_RST (1<<31)
++
++//Clock Conf Register
++#define RALINK_PCIE0_CLK_EN (1<<24)
++#define RALINK_PCIE1_CLK_EN (1<<25)
++#define RALINK_PCIE2_CLK_EN (1<<26)
++//#define RALINK_UPHY0_CLK_EN (1<<27)
++//#define RALINK_UPHY1_CLK_EN (1<<28)
++
++//CPU PLL CFG Register
++#define CPLL_SW_CONFIG (0x1UL << 31)
++#define CPLL_MULT_RATIO_SHIFT 16
++#define CPLL_MULT_RATIO (0x7UL << CPLL_MULT_RATIO_SHIFT)
++#define CPLL_DIV_RATIO_SHIFT 10
++#define CPLL_DIV_RATIO (0x3UL << CPLL_DIV_RATIO_SHIFT)
++#define BASE_CLOCK 40 /* Mhz */
++
++#define RALINK_TESTSTAT 0xBE000018
++#define RALINK_TESTSTAT2 0xBE00001C
++
++#elif defined (CONFIG_RALINK_MT7628)
++
++#define RALINK_SYSCTL_BASE 0xB0000000
++#define RALINK_TIMER_BASE 0xB0000100
++#define RALINK_INTCL_BASE 0xB0000200
++#define RALINK_MEMCTRL_BASE 0xB0000300
++#define RALINK_RBUS_MATRIXCTL_BASE 0xB0000400
++#define RALINK_MIPS_CNT_BASE 0x10000500
++#define RALINK_PIO_BASE 0xB0000600
++#define RALINK_SPI_SLAVE_BASE 0xB0000700
++#define RALINK_I2C_BASE 0xB0000900
++#define RALINK_I2S_BASE 0xB0000A00
++#define RALINK_SPI_BASE 0xB0000B00
++#define RALINK_UART_LITE1_BASE 0x10000C00
++#define RALINK_UART_LITE_BASE RALINK_UART_LITE1_BASE
++#define RALINK_UART_LITE2_BASE 0x10000D00
++#define RALINK_UART_BASE RALINK_UART_LITE2_BASE
++#define RALINK_UART_LITE3_BASE 0x10000E00
++#define RALINK_PCM_BASE 0xB0002000
++#define RALINK_GDMA_BASE 0xB0002800
++#define RALINK_AES_ENGINE_BASE 0xB0004000
++#define RALINK_CRYPTO_ENGINE_BASE RALINK_AES_ENGINE_BASE
++#define RALINK_FRAME_ENGINE_BASE 0xB0100000
++#define RALINK_PPE_BASE 0xB0100C00
++#define RALINK_ETH_SW_BASE 0xB0110000
++#define RALINK_USB_DEV_BASE 0xB0120000
++#define RALINK_MSDC_BASE 0xB0130000
++#define RALINK_PCI_BASE 0xB0140000
++#define RALINK_11N_MAC_BASE 0xB0180000
++#define RALINK_USB_HOST_BASE 0x101C0000
++
++#define RALINK_MCNT_CFG 0xB0000500
++#define RALINK_COMPARE 0xB0000504
++#define RALINK_COUNT 0xB0000508
++
++
++//Interrupt Controller
++#define RALINK_INTCTL_SYSCTL (1<<0)
++#define RALINK_INTCTL_TIMER0 (1<<1)
++#define RALINK_INTCTL_WDTIMER (1<<2)
++#define RALINK_INTCTL_ILL_ACCESS (1<<3)
++#define RALINK_INTCTL_PCM (1<<4)
++#define RALINK_INTCTL_UART (1<<5)
++#define RALINK_INTCTL_PIO (1<<6)
++#define RALINK_INTCTL_DMA (1<<7)
++#define RALINK_INTCTL_PC (1<<9)
++#define RALINK_INTCTL_I2S (1<<10)
++#define RALINK_INTCTL_SPI (1<<11)
++#define RALINK_INTCTL_UARTLITE (1<<12)
++#define RALINK_INTCTL_CRYPTO (1<<13)
++#define RALINK_INTCTL_ESW (1<<17)
++#define RALINK_INTCTL_UHST (1<<18)
++#define RALINK_INTCTL_UDEV (1<<19)
++#define RALINK_INTCTL_GLOBAL (1<<31)
++
++//Reset Control Register
++#define RALINK_SYS_RST (1<<0)
++#define RALINK_TIMER_RST (1<<8)
++#define RALINK_INTC_RST (1<<9)
++#define RALINK_MC_RST (1<<10)
++#define RALINK_PCM_RST (1<<11)
++#define RALINK_UART_RST (1<<12)
++#define RALINK_PIO_RST (1<<13)
++#define RALINK_DMA_RST (1<<14)
++#define RALINK_I2C_RST (1<<16)
++#define RALINK_I2S_RST (1<<17)
++#define RALINK_SPI_RST (1<<18)
++#define RALINK_UARTL_RST (1<<19)
++#define RALINK_FE_RST (1<<21)
++#define RALINK_UHST_RST (1<<22)
++#define RALINK_ESW_RST (1<<23)
++#define RALINK_EPHY_RST (1<<24)
++#define RALINK_UDEV_RST (1<<25)
++#define RALINK_PCIE0_RST (1<<26)
++#define RALINK_PCIE1_RST (1<<27)
++#define RALINK_MIPS_CNT_RST (1<<28)
++#define RALINK_CRYPTO_RST (1<<29)
++
++//Clock Conf Register
++#define RALINK_UPHY0_CLK_EN (1<<25)
++#define RALINK_UPHY1_CLK_EN (1<<22)
++#define RALINK_PCIE0_CLK_EN (1<<26)
++#define RALINK_PCIE1_CLK_EN (1<<27)
++
++//CPU PLL CFG Register
++#define CPLL_SW_CONFIG (0x1UL << 31)
++#define CPLL_MULT_RATIO_SHIFT 16
++#define CPLL_MULT_RATIO (0x7UL << CPLL_MULT_RATIO_SHIFT)
++#define CPLL_DIV_RATIO_SHIFT 10
++#define CPLL_DIV_RATIO (0x3UL << CPLL_DIV_RATIO_SHIFT)
++#define BASE_CLOCK 40 /* Mhz */
++
++#endif
++#endif
+diff --git a/arch/mips/include/asm/rt2880/serial_rt2880.h b/arch/mips/include/asm/rt2880/serial_rt2880.h
+new file mode 100644
+index 0000000..74f024f
+--- /dev/null
++++ b/arch/mips/include/asm/rt2880/serial_rt2880.h
+@@ -0,0 +1,443 @@
++/**************************************************************************
++ *
++ * BRIEF MODULE DESCRIPTION
++ * serial port definition for Ralink RT2880 solution
++ *
++ * Copyright 2007 Ralink Inc. (bruce_chang@ralinktech.com.tw)
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 675 Mass Ave, Cambridge, MA 02139, USA.
++ *
++ *
++ **************************************************************************
++ * May 2007 Bruce Chang
++ *
++ * Initial Release
++ *
++ *
++ *
++ **************************************************************************
++ */
++
++#if defined (CONFIG_RALINK_MT7621) || defined (CONFIG_RALINK_MT7628)
++#define RT2880_UART_RBR_OFFSET 0x00
++#define RT2880_UART_TBR_OFFSET 0x00
++#define RT2880_UART_IER_OFFSET 0x04
++#define RT2880_UART_IIR_OFFSET 0x08
++#define RT2880_UART_FCR_OFFSET 0x08
++#define RT2880_UART_LCR_OFFSET 0x0C
++#define RT2880_UART_MCR_OFFSET 0x10
++#define RT2880_UART_LSR_OFFSET 0x14
++#define RT2880_UART_DLL_OFFSET 0x00
++#define RT2880_UART_DLM_OFFSET 0x04
++#else
++#define RT2880_UART_RBR_OFFSET 0x00
++#define RT2880_UART_TBR_OFFSET 0x04
++#define RT2880_UART_IER_OFFSET 0x08
++#define RT2880_UART_IIR_OFFSET 0x0C
++#define RT2880_UART_FCR_OFFSET 0x10
++#define RT2880_UART_LCR_OFFSET 0x14
++#define RT2880_UART_MCR_OFFSET 0x18
++#define RT2880_UART_LSR_OFFSET 0x1C
++#define RT2880_UART_DLL_OFFSET 0x2C
++#define RT2880_UART_DLM_OFFSET 0x30
++#endif
++
++#define RBR(x) *(volatile u32 *)((x)+RT2880_UART_RBR_OFFSET)
++#define TBR(x) *(volatile u32 *)((x)+RT2880_UART_TBR_OFFSET)
++#define IER(x) *(volatile u32 *)((x)+RT2880_UART_IER_OFFSET)
++#define IIR(x) *(volatile u32 *)((x)+RT2880_UART_IIR_OFFSET)
++#define FCR(x) *(volatile u32 *)((x)+RT2880_UART_FCR_OFFSET)
++#define LCR(x) *(volatile u32 *)((x)+RT2880_UART_LCR_OFFSET)
++#define MCR(x) *(volatile u32 *)((x)+RT2880_UART_MCR_OFFSET)
++#define LSR(x) *(volatile u32 *)((x)+RT2880_UART_LSR_OFFSET)
++#define DLL(x) *(volatile u32 *)((x)+RT2880_UART_DLL_OFFSET)
++#define DLM(x) *(volatile u32 *)((x)+RT2880_UART_DLM_OFFSET)
++
++
++#if defined (CONFIG_RALINK_RT2880) || \
++ defined (CONFIG_RALINK_RT2883) || \
++ defined (CONFIG_RALINK_RT3883) || \
++ defined (CONFIG_RALINK_RT3352) || \
++ defined (CONFIG_RALINK_RT5350) || \
++ defined (CONFIG_RALINK_RT6855) || \
++ defined (CONFIG_RALINK_MT7620) || \
++ defined (CONFIG_RALINK_RT3052)
++
++#define UART_RX 0 /* In: Receive buffer (DLAB=0) */
++
++#define UART_TX 4 /* Out: Transmit buffer (DLAB=0) */
++#define UART_TRG 4 /* (LCR=BF) FCTR bit 7 selects Rx or Tx
++ * In: Fifo count
++ * Out: Fifo custom trigger levels
++ * XR16C85x only
++ */
++
++#define UART_IER 8 /* Out: Interrupt Enable Register */
++#define UART_FCTR 8 /* (LCR=BF) Feature Control Register
++ * XR16C85x only
++ */
++
++#define UART_IIR 12 /* In: Interrupt ID Register */
++#define UART_EFR 12 /* I/O: Extended Features Register */
++ /* (DLAB=1, 16C660 only) */
++
++#define UART_FCR 16 /* Out: FIFO Control Register */
++#define UART_LCR 20 /* Out: Line Control Register */
++#define UART_MCR 24 /* Out: Modem Control Register */
++#define UART_LSR 28 /* In: Line Status Register */
++#define UART_MSR 32 /* In: Modem Status Register */
++#define UART_SCR 36 /* I/O: Scratch Register */
++#define UART_DLL 44 /* Out: Divisor Latch Low (DLAB=1) */
++/* Since surfboard uart cannot be accessed by byte, using UART_DLM will cause
++ * unpredictable values to be written to the Divisor Latch
++ */
++#define UART_DLM 48 /* Out: Divisor Latch High (DLAB=1) */
++
++#else
++
++#define UART_RX 0 /* In: Receive buffer */
++#define UART_TX 0 /* Out: Transmit buffer */
++#define UART_DLL 0 /* Out: Divisor Latch Low */
++#define UART_TRG 0 /* FCTR bit 7 selects Rx or Tx
++ * In: Fifo count
++ * Out: Fifo custom trigger levels */
++
++#define UART_DLM 4 /* Out: Divisor Latch High */
++#define UART_IER 4 /* Out: Interrupt Enable Register */
++#define UART_FCTR 4 /* Feature Control Register */
++
++#define UART_IIR 8 /* In: Interrupt ID Register */
++#define UART_FCR 8 /* Out: FIFO Control Register */
++#define UART_EFR 8 /* I/O: Extended Features Register */
++
++#define UART_LCR 12 /* Out: Line Control Register */
++#define UART_MCR 16 /* Out: Modem Control Register */
++#define UART_LSR 20 /* In: Line Status Register */
++#define UART_MSR 24 /* In: Modem Status Register */
++#define UART_SCR 28 /* I/O: Scratch Register */
++#define UART_EMSR 28 /* Extended Mode Select Register */
++
++#endif
++/*
++ * DLAB=0
++ */
++//#define UART_IER 1 /* Out: Interrupt Enable Register */
++#define UART_IER_MSI 0x08 /* Enable Modem status interrupt */
++#define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */
++#define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */
++#define UART_IER_RDI 0x01 /* Enable receiver data interrupt */
++/*
++ * Sleep mode for ST16650 and TI16750. For the ST16650, EFR[4]=1
++ */
++#define UART_IERX_SLEEP 0x10 /* Enable sleep mode */
++
++//#define UART_IIR 2 /* In: Interrupt ID Register */
++#define UART_IIR_NO_INT 0x01 /* No interrupts pending */
++#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */
++#define UART_IIR_MSI 0x00 /* Modem status interrupt */
++#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */
++#define UART_IIR_RDI 0x04 /* Receiver data interrupt */
++#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */
++
++//#define UART_FCR 2 /* Out: FIFO Control Register */
++#define UART_FCR_ENABLE_FIFO 0x01 /* Enable the FIFO */
++#define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */
++#define UART_FCR_CLEAR_XMIT 0x04 /* Clear the XMIT FIFO */
++#define UART_FCR_DMA_SELECT 0x08 /* For DMA applications */
++/*
++ * Note: The FIFO trigger levels are chip specific:
++ * RX:76 = 00 01 10 11 TX:54 = 00 01 10 11
++ * PC16550D: 1 4 8 14 xx xx xx xx
++ * TI16C550A: 1 4 8 14 xx xx xx xx
++ * TI16C550C: 1 4 8 14 xx xx xx xx
++ * ST16C550: 1 4 8 14 xx xx xx xx
++ * ST16C650: 8 16 24 28 16 8 24 30 PORT_16650V2
++ * NS16C552: 1 4 8 14 xx xx xx xx
++ * ST16C654: 8 16 56 60 8 16 32 56 PORT_16654
++ * TI16C750: 1 16 32 56 xx xx xx xx PORT_16750
++ * TI16C752: 8 16 56 60 8 16 32 56
++ */
++#define UART_FCR_R_TRIG_00 0x00
++#define UART_FCR_R_TRIG_01 0x40
++#define UART_FCR_R_TRIG_10 0x80
++#define UART_FCR_R_TRIG_11 0xc0
++#define UART_FCR_T_TRIG_00 0x00
++#define UART_FCR_T_TRIG_01 0x10
++#define UART_FCR_T_TRIG_10 0x20
++#define UART_FCR_T_TRIG_11 0x30
++
++#define UART_FCR_TRIGGER_MASK 0xC0 /* Mask for the FIFO trigger range */
++#define UART_FCR_TRIGGER_1 0x00 /* Mask for trigger set at 1 */
++#define UART_FCR_TRIGGER_4 0x40 /* Mask for trigger set at 4 */
++#define UART_FCR_TRIGGER_8 0x80 /* Mask for trigger set at 8 */
++#define UART_FCR_TRIGGER_14 0xC0 /* Mask for trigger set at 14 */
++/* 16650 definitions */
++#define UART_FCR6_R_TRIGGER_8 0x00 /* Mask for receive trigger set at 1 */
++#define UART_FCR6_R_TRIGGER_16 0x40 /* Mask for receive trigger set at 4 */
++#define UART_FCR6_R_TRIGGER_24 0x80 /* Mask for receive trigger set at 8 */
++#define UART_FCR6_R_TRIGGER_28 0xC0 /* Mask for receive trigger set at 14 */
++#define UART_FCR6_T_TRIGGER_16 0x00 /* Mask for transmit trigger set at 16 */
++#define UART_FCR6_T_TRIGGER_8 0x10 /* Mask for transmit trigger set at 8 */
++#define UART_FCR6_T_TRIGGER_24 0x20 /* Mask for transmit trigger set at 24 */
++#define UART_FCR6_T_TRIGGER_30 0x30 /* Mask for transmit trigger set at 30 */
++#define UART_FCR7_64BYTE 0x20 /* Go into 64 byte mode (TI16C750) */
++
++//#define UART_LCR 3 /* Out: Line Control Register */
++/*
++ * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting
++ * UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits.
++ */
++#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */
++#define UART_LCR_SBC 0x40 /* Set break control */
++#define UART_LCR_SPAR 0x20 /* Stick parity (?) */
++#define UART_LCR_EPAR 0x10 /* Even parity select */
++#define UART_LCR_PARITY 0x08 /* Parity Enable */
++#define UART_LCR_STOP 0x04 /* Stop bits: 0=1 bit, 1=2 bits */
++#define UART_LCR_WLEN5 0x00 /* Wordlength: 5 bits */
++#define UART_LCR_WLEN6 0x01 /* Wordlength: 6 bits */
++#define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */
++#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */
++
++//#define UART_MCR 4 /* Out: Modem Control Register */
++#define UART_MCR_CLKSEL 0x80 /* Divide clock by 4 (TI16C752, EFR[4]=1) */
++#define UART_MCR_TCRTLR 0x40 /* Access TCR/TLR (TI16C752, EFR[4]=1) */
++#define UART_MCR_XONANY 0x20 /* Enable Xon Any (TI16C752, EFR[4]=1) */
++#define UART_MCR_AFE 0x20 /* Enable auto-RTS/CTS (TI16C550C/TI16C750) */
++#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */
++#define UART_MCR_OUT2 0x08 /* Out2 complement */
++#define UART_MCR_OUT1 0x04 /* Out1 complement */
++#define UART_MCR_RTS 0x02 /* RTS complement */
++#define UART_MCR_DTR 0x01 /* DTR complement */
++
++//#define UART_LSR 5 /* In: Line Status Register */
++#define UART_LSR_TEMT 0x40 /* Transmitter empty */
++#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */
++#define UART_LSR_BI 0x10 /* Break interrupt indicator */
++#define UART_LSR_FE 0x08 /* Frame error indicator */
++#define UART_LSR_PE 0x04 /* Parity error indicator */
++#define UART_LSR_OE 0x02 /* Overrun error indicator */
++#define UART_LSR_DR 0x01 /* Receiver data ready */
++
++//#define UART_MSR 6 /* In: Modem Status Register */
++#define UART_MSR_DCD 0x80 /* Data Carrier Detect */
++#define UART_MSR_RI 0x40 /* Ring Indicator */
++#define UART_MSR_DSR 0x20 /* Data Set Ready */
++#define UART_MSR_CTS 0x10 /* Clear to Send */
++#define UART_MSR_DDCD 0x08 /* Delta DCD */
++#define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */
++#define UART_MSR_DDSR 0x02 /* Delta DSR */
++#define UART_MSR_DCTS 0x01 /* Delta CTS */
++#define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */
++
++//#define UART_SCR 7 /* I/O: Scratch Register */
++
++/*
++ * DLAB=1
++ */
++//#define UART_DLL 0 /* Out: Divisor Latch Low */
++//#define UART_DLM 1 /* Out: Divisor Latch High */
++
++/*
++ * LCR=0xBF (or DLAB=1 for 16C660)
++ */
++//#define UART_EFR 2 /* I/O: Extended Features Register */
++#define UART_EFR_CTS 0x80 /* CTS flow control */
++#define UART_EFR_RTS 0x40 /* RTS flow control */
++#define UART_EFR_SCD 0x20 /* Special character detect */
++#define UART_EFR_ECB 0x10 /* Enhanced control bit */
++/*
++ * the low four bits control software flow control
++ */
++
++/*
++ * LCR=0xBF, TI16C752, ST16650, ST16650A, ST16654
++ */
++#define UART_XON1 4 /* I/O: Xon character 1 */
++#define UART_XON2 5 /* I/O: Xon character 2 */
++#define UART_XOFF1 6 /* I/O: Xoff character 1 */
++#define UART_XOFF2 7 /* I/O: Xoff character 2 */
++
++/*
++ * EFR[4]=1 MCR[6]=1, TI16C752
++ */
++#define UART_TI752_TCR 6 /* I/O: transmission control register */
++#define UART_TI752_TLR 7 /* I/O: trigger level register */
++
++/*
++ * LCR=0xBF, XR16C85x
++ */
++//#define UART_TRG 0 /* FCTR bit 7 selects Rx or Tx
++// * In: Fifo count
++// * Out: Fifo custom trigger levels */
++/*
++ * These are the definitions for the Programmable Trigger Register
++ */
++#define UART_TRG_1 0x01
++#define UART_TRG_4 0x04
++#define UART_TRG_8 0x08
++#define UART_TRG_16 0x10
++#define UART_TRG_32 0x20
++#define UART_TRG_64 0x40
++#define UART_TRG_96 0x60
++#define UART_TRG_120 0x78
++#define UART_TRG_128 0x80
++
++//#define UART_FCTR 1 /* Feature Control Register */
++#define UART_FCTR_RTS_NODELAY 0x00 /* RTS flow control delay */
++#define UART_FCTR_RTS_4DELAY 0x01
++#define UART_FCTR_RTS_6DELAY 0x02
++#define UART_FCTR_RTS_8DELAY 0x03
++#define UART_FCTR_IRDA 0x04 /* IrDa data encode select */
++#define UART_FCTR_TX_INT 0x08 /* Tx interrupt type select */
++#define UART_FCTR_TRGA 0x00 /* Tx/Rx 550 trigger table select */
++#define UART_FCTR_TRGB 0x10 /* Tx/Rx 650 trigger table select */
++#define UART_FCTR_TRGC 0x20 /* Tx/Rx 654 trigger table select */
++#define UART_FCTR_TRGD 0x30 /* Tx/Rx 850 programmable trigger select */
++#define UART_FCTR_SCR_SWAP 0x40 /* Scratch pad register swap */
++#define UART_FCTR_RX 0x00 /* Programmable trigger mode select */
++#define UART_FCTR_TX 0x80 /* Programmable trigger mode select */
++
++/*
++ * LCR=0xBF, FCTR[6]=1
++ */
++//#define UART_EMSR 7 /* Extended Mode Select Register */
++#define UART_EMSR_FIFO_COUNT 0x01 /* Rx/Tx select */
++#define UART_EMSR_ALT_COUNT 0x02 /* Alternating count select */
++
++/*
++ * The Intel XScale on-chip UARTs define these bits
++ */
++#define UART_IER_DMAE 0x80 /* DMA Requests Enable */
++#define UART_IER_UUE 0x40 /* UART Unit Enable */
++#define UART_IER_NRZE 0x20 /* NRZ coding Enable */
++#define UART_IER_RTOIE 0x10 /* Receiver Time Out Interrupt Enable */
++
++#define UART_IIR_TOD 0x08 /* Character Timeout Indication Detected */
++
++#define UART_FCR_PXAR1 0x00 /* receive FIFO treshold = 1 */
++#define UART_FCR_PXAR8 0x40 /* receive FIFO treshold = 8 */
++#define UART_FCR_PXAR16 0x80 /* receive FIFO treshold = 16 */
++#define UART_FCR_PXAR32 0xc0 /* receive FIFO treshold = 32 */
++
++
++
++
++/*
++ * These register definitions are for the 16C950
++ */
++#define UART_ASR 0x01 /* Additional Status Register */
++#define UART_RFL 0x03 /* Receiver FIFO level */
++#define UART_TFL 0x04 /* Transmitter FIFO level */
++#define UART_ICR 0x05 /* Index Control Register */
++
++/* The 16950 ICR registers */
++#define UART_ACR 0x00 /* Additional Control Register */
++#define UART_CPR 0x01 /* Clock Prescalar Register */
++#define UART_TCR 0x02 /* Times Clock Register */
++#define UART_CKS 0x03 /* Clock Select Register */
++#define UART_TTL 0x04 /* Transmitter Interrupt Trigger Level */
++#define UART_RTL 0x05 /* Receiver Interrupt Trigger Level */
++#define UART_FCL 0x06 /* Flow Control Level Lower */
++#define UART_FCH 0x07 /* Flow Control Level Higher */
++#define UART_ID1 0x08 /* ID #1 */
++#define UART_ID2 0x09 /* ID #2 */
++#define UART_ID3 0x0A /* ID #3 */
++#define UART_REV 0x0B /* Revision */
++#define UART_CSR 0x0C /* Channel Software Reset */
++#define UART_NMR 0x0D /* Nine-bit Mode Register */
++#define UART_CTR 0xFF
++
++/*
++ * The 16C950 Additional Control Reigster
++ */
++#define UART_ACR_RXDIS 0x01 /* Receiver disable */
++#define UART_ACR_TXDIS 0x02 /* Receiver disable */
++#define UART_ACR_DSRFC 0x04 /* DSR Flow Control */
++#define UART_ACR_TLENB 0x20 /* 950 trigger levels enable */
++#define UART_ACR_ICRRD 0x40 /* ICR Read enable */
++#define UART_ACR_ASREN 0x80 /* Additional status enable */
++
++
++
++/*
++ * These definitions are for the RSA-DV II/S card, from
++ *
++ * Kiyokazu SUTO <suto@ks-and-ks.ne.jp>
++ */
++
++#define UART_RSA_BASE (-8)
++
++#define UART_RSA_MSR ((UART_RSA_BASE) + 0) /* I/O: Mode Select Register */
++
++#define UART_RSA_MSR_SWAP (1 << 0) /* Swap low/high 8 bytes in I/O port addr */
++#define UART_RSA_MSR_FIFO (1 << 2) /* Enable the external FIFO */
++#define UART_RSA_MSR_FLOW (1 << 3) /* Enable the auto RTS/CTS flow control */
++#define UART_RSA_MSR_ITYP (1 << 4) /* Level (1) / Edge triger (0) */
++
++#define UART_RSA_IER ((UART_RSA_BASE) + 1) /* I/O: Interrupt Enable Register */
++
++#define UART_RSA_IER_Rx_FIFO_H (1 << 0) /* Enable Rx FIFO half full int. */
++#define UART_RSA_IER_Tx_FIFO_H (1 << 1) /* Enable Tx FIFO half full int. */
++#define UART_RSA_IER_Tx_FIFO_E (1 << 2) /* Enable Tx FIFO empty int. */
++#define UART_RSA_IER_Rx_TOUT (1 << 3) /* Enable char receive timeout int */
++#define UART_RSA_IER_TIMER (1 << 4) /* Enable timer interrupt */
++
++#define UART_RSA_SRR ((UART_RSA_BASE) + 2) /* IN: Status Read Register */
++
++#define UART_RSA_SRR_Tx_FIFO_NEMP (1 << 0) /* Tx FIFO is not empty (1) */
++#define UART_RSA_SRR_Tx_FIFO_NHFL (1 << 1) /* Tx FIFO is not half full (1) */
++#define UART_RSA_SRR_Tx_FIFO_NFUL (1 << 2) /* Tx FIFO is not full (1) */
++#define UART_RSA_SRR_Rx_FIFO_NEMP (1 << 3) /* Rx FIFO is not empty (1) */
++#define UART_RSA_SRR_Rx_FIFO_NHFL (1 << 4) /* Rx FIFO is not half full (1) */
++#define UART_RSA_SRR_Rx_FIFO_NFUL (1 << 5) /* Rx FIFO is not full (1) */
++#define UART_RSA_SRR_Rx_TOUT (1 << 6) /* Character reception timeout occurred (1) */
++#define UART_RSA_SRR_TIMER (1 << 7) /* Timer interrupt occurred */
++
++#define UART_RSA_FRR ((UART_RSA_BASE) + 2) /* OUT: FIFO Reset Register */
++
++#define UART_RSA_TIVSR ((UART_RSA_BASE) + 3) /* I/O: Timer Interval Value Set Register */
++
++#define UART_RSA_TCR ((UART_RSA_BASE) + 4) /* OUT: Timer Control Register */
++
++#define UART_RSA_TCR_SWITCH (1 << 0) /* Timer on */
++
++/*
++ * The RSA DSV/II board has two fixed clock frequencies. One is the
++ * standard rate, and the other is 8 times faster.
++ */
++#define SERIAL_RSA_BAUD_BASE (921600)
++#define SERIAL_RSA_BAUD_BASE_LO (SERIAL_RSA_BAUD_BASE / 8)
++
++/*
++ * Extra serial register definitions for the internal UARTs
++ * in TI OMAP processors.
++ */
++#define UART_OMAP_MDR1 0x08 /* Mode definition register */
++#define UART_OMAP_MDR2 0x09 /* Mode definition register 2 */
++#define UART_OMAP_SCR 0x10 /* Supplementary control register */
++#define UART_OMAP_SSR 0x11 /* Supplementary status register */
++#define UART_OMAP_EBLR 0x12 /* BOF length register */
++#define UART_OMAP_OSC_12M_SEL 0x13 /* OMAP1510 12MHz osc select */
++#define UART_OMAP_MVER 0x14 /* Module version register */
++#define UART_OMAP_SYSC 0x15 /* System configuration register */
++#define UART_OMAP_SYSS 0x16 /* System status register */
++
++
+diff --git a/arch/mips/include/asm/rt2880/sizes.h b/arch/mips/include/asm/rt2880/sizes.h
+new file mode 100644
+index 0000000..7f50ae0
+--- /dev/null
++++ b/arch/mips/include/asm/rt2880/sizes.h
+@@ -0,0 +1,52 @@
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++/* DO NOT EDIT!! - this file automatically generated
++ * from .s file by awk -f s2h.awk
++ */
++/* Size definitions
++ * Copyright (C) ARM Limited 1998. All rights reserved.
++ */
++
++#ifndef __sizes_h
++#define __sizes_h 1
++
++/* handy sizes */
++#define SZ_1K 0x00000400
++#define SZ_4K 0x00001000
++#define SZ_8K 0x00002000
++#define SZ_16K 0x00004000
++#define SZ_64K 0x00010000
++#define SZ_128K 0x00020000
++#define SZ_256K 0x00040000
++#define SZ_512K 0x00080000
++
++#define SZ_1M 0x00100000
++#define SZ_2M 0x00200000
++#define SZ_4M 0x00400000
++#define SZ_8M 0x00800000
++#define SZ_16M 0x01000000
++#define SZ_32M 0x02000000
++#define SZ_64M 0x04000000
++#define SZ_128M 0x08000000
++#define SZ_256M 0x10000000
++#define SZ_512M 0x20000000
++
++#define SZ_1G 0x40000000
++#define SZ_2G 0x80000000
++
++#endif
++
++/* END */
+diff --git a/arch/mips/include/asm/rt2880/surfboard.h b/arch/mips/include/asm/rt2880/surfboard.h
+new file mode 100644
+index 0000000..373da34
+--- /dev/null
++++ b/arch/mips/include/asm/rt2880/surfboard.h
+@@ -0,0 +1,70 @@
++/*
++ * Copyright (C) 2001 Palmchip Corporation. All rights reserved.
++ *
++ * ########################################################################
++ *
++ * This program is free software; you can distribute it and/or modify it
++ * under the terms of the GNU General Public License (Version 2) as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++ *
++ * ########################################################################
++ *
++ */
++#ifndef _SURFBOARD_H
++#define _SURFBOARD_H
++
++#include <asm/addrspace.h>
++
++
++
++/*
++ * Surfboard system clock.
++ * This is the default value and maybe overidden by System Clock passed on the
++ * command line (sysclk=).
++ */
++#define SURFBOARD_SYSTEM_CLOCK (125000000)
++
++/*
++ * Surfboard UART base baud rate = System Clock / 16.
++ * Ex. (14.7456 MHZ / 16) = 921600
++ * (32.0000 MHZ / 16) = 2000000
++ */
++#define SURFBOARD_BAUD_DIV (16)
++#define SURFBOARD_BASE_BAUD (SURFBOARD_SYSTEM_CLOCK / SURFBOARD_BAUD_DIV)
++
++/*
++ * Maximum number of IDE Controllers
++ * Surfboard only has one ide (ide0), so only 2 drives are
++ * possible. (no need to check for more hwifs.)
++ */
++//#define MAX_IDE_HWIFS (1) /* Surfboard/Wakeboard */
++#define MAX_IDE_HWIFS (2) /* Graphite board */
++
++#define GCMP_BASE_ADDR 0x1fbf8000
++#define GCMP_ADDRSPACE_SZ (256 * 1024)
++
++/*
++ * * GIC Specific definitions
++ * */
++#define GIC_BASE_ADDR 0x1fbc0000
++#define GIC_ADDRSPACE_SZ (128 * 1024)
++#define MIPS_GIC_IRQ_BASE (MIPS_CPU_IRQ_BASE)
++
++/* GIC's Nomenclature for Core Interrupt Pins */
++#define GIC_CPU_INT0 0 /* Core Interrupt 2 */
++#define GIC_CPU_INT1 1 /* . */
++#define GIC_CPU_INT2 2 /* . */
++#define GIC_CPU_INT3 3 /* . */
++#define GIC_CPU_INT4 4 /* . */
++#define GIC_CPU_INT5 5 /* Core Interrupt 5 */
++
++#endif /* !(_SURFBOARD_H) */
+diff --git a/arch/mips/include/asm/rt2880/surfboardint.h b/arch/mips/include/asm/rt2880/surfboardint.h
+new file mode 100644
+index 0000000..671cca5
+--- /dev/null
++++ b/arch/mips/include/asm/rt2880/surfboardint.h
+@@ -0,0 +1,190 @@
++/*
++ * Copyright (C) 2001 Palmchip Corporation. All rights reserved.
++ *
++ * ########################################################################
++ *
++ * This program is free software; you can distribute it and/or modify it
++ * under the terms of the GNU General Public License (Version 2) as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++ *
++ * ########################################################################
++ *
++ * Defines for the Surfboard interrupt controller.
++ *
++ */
++#ifndef _SURFBOARDINT_H
++#define _SURFBOARDINT_H
++
++/* Number of IRQ supported on hw interrupt 0. */
++#if defined (CONFIG_RALINK_RT2880)
++#define RALINK_CPU_TIMER_IRQ 6 /* mips timer */
++#define SURFBOARDINT_GPIO 7 /* GPIO */
++#define SURFBOARDINT_UART1 8 /* UART Lite */
++#define SURFBOARDINT_UART 9 /* UART */
++#define SURFBOARDINT_TIMER0 10 /* timer0 */
++#elif defined (CONFIG_RALINK_RT3052) || defined (CONFIG_RALINK_RT3352) || defined (CONFIG_RALINK_RT2883) || defined (CONFIG_RALINK_RT5350) || defined (CONFIG_RALINK_RT6855) || defined (CONFIG_RALINK_MT7620)
++#define RALINK_CPU_TIMER_IRQ 5 /* mips timer */
++#define SURFBOARDINT_GPIO 6 /* GPIO */
++#define SURFBOARDINT_DMA 7 /* DMA */
++#define SURFBOARDINT_NAND 8 /* NAND */
++#define SURFBOARDINT_PC 9 /* Performance counter */
++#define SURFBOARDINT_I2S 10 /* I2S */
++#define SURFBOARDINT_SDXC 14 /* SDXC */
++#define SURFBOARDINT_ESW 17 /* ESW */
++#define SURFBOARDINT_UART1 12 /* UART Lite */
++#define SURFBOARDINT_CRYPTO 13 /* CryptoEngine */
++#define SURFBOARDINT_SYSCTL 32 /* SYSCTL */
++#define SURFBOARDINT_TIMER0 33 /* timer0 */
++#define SURFBOARDINT_WDG 34 /* watch dog */
++#define SURFBOARDINT_ILL_ACC 35 /* illegal access */
++#define SURFBOARDINT_PCM 36 /* PCM */
++#define SURFBOARDINT_UART 37 /* UART */
++#define RALINK_INT_PCIE0 13 /* PCIE0 */
++#define RALINK_INT_PCIE1 14 /* PCIE1 */
++
++
++#elif defined (CONFIG_RALINK_MT7628)
++#define SURFBOARDINT_SYSCTL 0 /* SYSCTL */
++#define SURFBOARDINT_PCM 4 /* PCM */
++#define SURFBOARDINT_GPIO 6 /* GPIO */
++#define SURFBOARDINT_DMA 7 /* DMA */
++#define SURFBOARDINT_PC 9 /* Performance counter */
++#define SURFBOARDINT_I2S 10 /* I2S */
++#define SURFBOARDINT_SPI 11 /* SPI */
++#define SURFBOARDINT_AES 13 /* AES */
++#define SURFBOARDINT_CRYPTO 13 /* CryptoEngine */
++#define SURFBOARDINT_SDXC 14 /* SDXC */
++#define SURFBOARDINT_ESW 17 /* ESW */
++#define SURFBOARDINT_USB 18 /* USB */
++#define SURFBOARDINT_UART_LITE1 20 /* UART Lite */
++#define SURFBOARDINT_UART_LITE2 21 /* UART Lite */
++#define SURFBOARDINT_UART_LITE3 22 /* UART Lite */
++#define SURFBOARDINT_UART1 SURFBOARDINT_UART_LITE1
++#define SURFBOARDINT_UART SURFBOARDINT_UART_LITE2
++#define SURFBOARDINT_WDG 23 /* WDG timer */
++#define SURFBOARDINT_TIMER0 24 /* Timer0 */
++#define SURFBOARDINT_TIMER1 25 /* Timer1 */
++#define SURFBOARDINT_ILL_ACC 35 /* illegal access */
++#define RALINK_INT_PCIE0 2 /* PCIE0 */
++
++
++#elif defined (CONFIG_RALINK_MT7621)
++
++#define SURFBOARDINT_FE 3 /* FE */
++#define SURFBOARDINT_PCIE0 4 /* PCIE0 */
++#define SURFBOARDINT_SYSCTL 6 /* SYSCTL */
++#define SURFBOARDINT_I2C 8 /* I2C */
++#define SURFBOARDINT_DRAMC 9 /* DRAMC */
++#define SURFBOARDINT_PCM 10 /* PCM */
++#define SURFBOARDINT_HSGDMA 11 /* HSGDMA */
++#define SURFBOARDINT_GPIO 12 /* GPIO */
++#define SURFBOARDINT_DMA 13 /* GDMA */
++#define SURFBOARDINT_NAND 14 /* NAND */
++#define SURFBOARDINT_NAND_ECC 15 /* NFI ECC */
++#define SURFBOARDINT_I2S 16 /* I2S */
++#define SURFBOARDINT_SPI 17 /* SPI */
++#define SURFBOARDINT_SPDIF 18 /* SPDIF */
++#define SURFBOARDINT_CRYPTO 19 /* CryptoEngine */
++#define SURFBOARDINT_SDXC 20 /* SDXC */
++#define SURFBOARDINT_PCTRL 21 /* Performance counter */
++#define SURFBOARDINT_USB 22 /* USB */
++#define SURFBOARDINT_ESW 31 /* Switch */
++#define SURFBOARDINT_PCIE1 24 /* PCIE1 */
++#define SURFBOARDINT_PCIE2 25 /* PCIE2 */
++#define SURFBOARDINT_UART_LITE1 26 /* UART Lite */
++#define SURFBOARDINT_UART_LITE2 27 /* UART Lite */
++#define SURFBOARDINT_UART_LITE3 28 /* UART Lite */
++#define SURFBOARDINT_UART SURFBOARDINT_UART_LITE2 //ttyS0
++#define SURFBOARDINT_UART1 SURFBOARDINT_UART_LITE1 //ttyS1
++
++#define SURFBOARDINT_WDG 29 /* WDG timer */
++#define SURFBOARDINT_TIMER0 30 /* Timer0 */
++#define SURFBOARDINT_TIMER1 31 /* Timer1 */
++
++#define RALINK_INT_PCIE0 SURFBOARDINT_PCIE0
++#define RALINK_INT_PCIE1 SURFBOARDINT_PCIE1
++#define RALINK_INT_PCIE2 SURFBOARDINT_PCIE2
++
++#elif defined (CONFIG_RALINK_RT3883)
++#define RALINK_CPU_TIMER_IRQ 5 /* mips timer */
++#define SURFBOARDINT_GPIO 6 /* GPIO */
++#define SURFBOARDINT_DMA 7 /* DMA */
++#define SURFBOARDINT_NAND 8 /* NAND */
++#define SURFBOARDINT_PC 9 /* Performance counter */
++#define SURFBOARDINT_I2S 10 /* I2S */
++#define SURFBOARDINT_UART1 12 /* UART Lite */
++#define SURFBOARDINT_PCI 18 /* PCI */
++#define SURFBOARDINT_UDEV 19 /* USB Device */
++#define SURFBOARDINT_UHST 20 /* USB Host */
++#define SURFBOARDINT_SYSCTL 32 /* SYSCTL */
++#define SURFBOARDINT_TIMER0 33 /* timer0 */
++#define SURFBOARDINT_ILL_ACC 35 /* illegal access */
++#define SURFBOARDINT_PCM 36 /* PCM */
++#define SURFBOARDINT_UART 37 /* UART */
++#endif
++
++#define SURFBOARDINT_END 64
++#define RT2880_INTERINT_START 40
++
++/* Global interrupt bit definitions */
++#define C_SURFBOARD_GLOBAL_INT 31
++#define M_SURFBOARD_GLOBAL_INT (1 << C_SURFBOARD_GLOBAL_INT)
++
++/* added ??? */
++#define RALINK_SDRAM_ILL_ACC_ADDR *(volatile u32 *)(RALINK_SYSCTL_BASE + 0x310)
++#define RALINK_SDRAM_ILL_ACC_TYPE *(volatile u32 *)(RALINK_SYSCTL_BASE + 0x314)
++/* end of added, bobtseng */
++
++/*
++ * Surfboard registers are memory mapped on 32-bit aligned boundaries and
++ * only word access are allowed.
++ */
++#if defined (CONFIG_RALINK_MT7621) || defined (CONFIG_RALINK_MT7628)
++#define RALINK_IRQ0STAT (RALINK_INTCL_BASE + 0x9C) //IRQ_STAT
++#define RALINK_IRQ1STAT (RALINK_INTCL_BASE + 0xA0) //FIQ_STAT
++#define RALINK_INTTYPE (RALINK_INTCL_BASE + 0x6C) //FIQ_SEL
++#define RALINK_INTRAW (RALINK_INTCL_BASE + 0xA4) //INT_PURE
++#define RALINK_INTENA (RALINK_INTCL_BASE + 0x80) //IRQ_MASK_SET
++#define RALINK_INTDIS (RALINK_INTCL_BASE + 0x78) //IRQ_MASK_CLR
++#else
++#define RALINK_IRQ0STAT (RALINK_INTCL_BASE + 0x0)
++#define RALINK_IRQ1STAT (RALINK_INTCL_BASE + 0x4)
++#define RALINK_INTTYPE (RALINK_INTCL_BASE + 0x20)
++#define RALINK_INTRAW (RALINK_INTCL_BASE + 0x30)
++#define RALINK_INTENA (RALINK_INTCL_BASE + 0x34)
++#define RALINK_INTDIS (RALINK_INTCL_BASE + 0x38)
++#endif
++
++/* bobtseng added ++, 2006.3.6. */
++#define read_32bit_cp0_register(source) \
++({ int __res; \
++ __asm__ __volatile__( \
++ ".set\tpush\n\t" \
++ ".set\treorder\n\t" \
++ "mfc0\t%0,"STR(source)"\n\t" \
++ ".set\tpop" \
++ : "=r" (__res)); \
++ __res;})
++
++#define write_32bit_cp0_register(register,value) \
++ __asm__ __volatile__( \
++ "mtc0\t%0,"STR(register)"\n\t" \
++ "nop" \
++ : : "r" (value));
++
++/* bobtseng added --, 2006.3.6. */
++
++void surfboardint_init(void);
++u32 get_surfboard_sysclk(void);
++
++
++#endif /* !(_SURFBOARDINT_H) */
+diff --git a/arch/mips/include/asm/rt2880/war.h b/arch/mips/include/asm/rt2880/war.h
+new file mode 100644
+index 0000000..7c6931d
+--- /dev/null
++++ b/arch/mips/include/asm/rt2880/war.h
+@@ -0,0 +1,25 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
++ */
++#ifndef __ASM_MIPS_MACH_MIPS_WAR_H
++#define __ASM_MIPS_MACH_MIPS_WAR_H
++
++#define R4600_V1_INDEX_ICACHEOP_WAR 0
++#define R4600_V1_HIT_CACHEOP_WAR 0
++#define R4600_V2_HIT_CACHEOP_WAR 0
++#define R5432_CP0_INTERRUPT_WAR 0
++#define BCM1250_M3_WAR 0
++#define SIBYTE_1956_WAR 0
++#define MIPS4K_ICACHE_REFILL_WAR 1
++#define MIPS_CACHE_SYNC_WAR 1
++#define TX49XX_ICACHE_INDEX_INV_WAR 0
++#define RM9000_CDEX_SMP_WAR 0
++#define ICACHE_REFILLS_WORKAROUND_WAR 1
++#define R10000_LLSC_WAR 0
++#define MIPS34K_MISSED_ITLB_WAR 0
++
++#endif /* __ASM_MIPS_MACH_MIPS_WAR_H */
+diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
+index ef6a274..1b9b3b2 100644
+--- a/drivers/net/ethernet/Kconfig
++++ b/drivers/net/ethernet/Kconfig
+@@ -135,6 +135,7 @@ source "drivers/net/ethernet/packetengines/Kconfig"
+ source "drivers/net/ethernet/pasemi/Kconfig"
+ source "drivers/net/ethernet/qlogic/Kconfig"
+ source "drivers/net/ethernet/ralink/Kconfig"
++source "drivers/net/ethernet/raeth/Kconfig"
+ source "drivers/net/ethernet/realtek/Kconfig"
+ source "drivers/net/ethernet/renesas/Kconfig"
+ source "drivers/net/ethernet/rdc/Kconfig"
+diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
+index 7c3eb7b..e66b3bb 100644
+--- a/drivers/net/ethernet/Makefile
++++ b/drivers/net/ethernet/Makefile
+@@ -57,6 +57,7 @@ obj-$(CONFIG_NET_PACKET_ENGINE) += packetengines/
+ obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
+ obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
+ obj-$(CONFIG_NET_RALINK) += ralink/
++obj-$(CONFIG_RAETH) += raeth/
+ obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
+ obj-$(CONFIG_SH_ETH) += renesas/
+ obj-$(CONFIG_NET_VENDOR_RDC) += rdc/
+diff --git a/drivers/net/ethernet/raeth/Kconfig b/drivers/net/ethernet/raeth/Kconfig
+new file mode 100644
+index 0000000..e24b52c
+--- /dev/null
++++ b/drivers/net/ethernet/raeth/Kconfig
+@@ -0,0 +1,344 @@
++
++config RA_NAT_NONE
++ bool
++ default y
++ depends on RALINK
++
++config MT7621_ASIC
++ bool
++ default y
++ depends on SOC_MT7621
++
++config RALINK_MT7621
++ bool
++ default y
++ depends on SOC_MT7621
++
++config RAETH
++ tristate "Ralink GMAC"
++ depends on SOC_MT7621
++ ---help---
++ This driver supports Ralink gigabit ethernet family of
++ adapters.
++
++config PDMA_NEW
++ bool
++ default y if (RALINK_MT7620 || RALINK_MT7621)
++ depends on RAETH
++
++config RAETH_SCATTER_GATHER_RX_DMA
++ bool
++ default y if (RALINK_MT7620 || RALINK_MT7621)
++ depends on RAETH
++
++
++choice
++ prompt "Network BottomHalves"
++ depends on RAETH
++ default RA_NETWORK_WORKQUEUE_BH
++
++ config RA_NETWORK_TASKLET_BH
++ bool "Tasklet"
++
++ config RA_NETWORK_WORKQUEUE_BH
++ bool "Work Queue"
++
++ config RAETH_NAPI
++ bool "NAPI"
++
++endchoice
++
++#config TASKLET_WORKQUEUE_SW
++# bool "Tasklet and Workqueue switch"
++# depends on RA_NETWORK_TASKLET_BH
++
++config RAETH_SKB_RECYCLE_2K
++ bool "SKB Recycling"
++ depends on RAETH
++
++config RAETH_SPECIAL_TAG
++ bool "Ralink Special Tag (0x810x)"
++ depends on RAETH && RT_3052_ESW
++
++#config RAETH_JUMBOFRAME
++# bool "Jumbo Frame up to 4K bytes"
++# depends on RAETH && !(RALINK_RT3052 || RALINK_RT3352 || RALINK_RT5350 || RALINK_MT7628)
++
++config RAETH_CHECKSUM_OFFLOAD
++ bool "TCP/UDP/IP checksum offload"
++ default y
++ depends on RAETH && !RALINK_RT2880
++
++#config RAETH_SW_FC
++# bool "When TX ring is full, inform kernel stop transmit and stop RX handler"
++# default n
++# depends on RAETH
++
++config 32B_DESC
++ bool "32bytes TX/RX description"
++ default n
++ depends on RAETH && (RALINK_MT7620 || RALINK_MT7621)
++ ---help---
++ At this moment, you cannot enable 32B description with Multiple RX ring at the same time.
++
++config RAETH_LRO
++ bool "LRO (Large Receive Offload )"
++ select INET_LRO
++ depends on RAETH && (RALINK_RT6855A || RALINK_MT7620 || RALINK_MT7621)
++
++config RAETH_HW_VLAN_TX
++ bool "Transmit VLAN HW (DoubleVLAN is not supported)"
++ depends on RAETH && !(RALINK_RT5350 || RALINK_MT7628)
++ ---help---
++ Please disable HW_VLAN_TX if you need double vlan
++
++config RAETH_HW_VLAN_RX
++ bool "Receive VLAN HW (DoubleVLAN is not supported)"
++ depends on RAETH && RALINK_MT7621
++ ---help---
++ Please disable HW_VLAN_RX if you need double vlan
++
++config RAETH_TSO
++ bool "TSOV4 (Tcp Segmentaton Offload)"
++ depends on (RAETH_HW_VLAN_TX && (RALINK_RT6855 || RALINK_RT6855A || RALINK_MT7620)) || RALINK_MT7621
++
++config RAETH_TSOV6
++ bool "TSOV6 (Tcp Segmentaton Offload)"
++ depends on RAETH_TSO
++
++config RAETH_RW_PDMAPTR_FROM_VAR
++ bool
++ default y if RALINK_RT6855A || RALINK_MT7620
++ depends on RAETH
++
++#config RAETH_QOS
++# bool "QoS Feature"
++# depends on RAETH && !RALINK_RT2880 && !RALINK_MT7620 && !RALINK_MT7621 && !RAETH_TSO
++
++choice
++ prompt "QoS Type"
++ depends on RAETH_QOS
++ default DSCP_QOS_DSCP
++
++config RAETH_QOS_DSCP_BASED
++ bool "DSCP-based"
++ depends on RAETH_QOS
++
++config RAETH_QOS_VPRI_BASED
++ bool "VPRI-based"
++ depends on RAETH_QOS
++
++endchoice
++
++config RAETH_QDMA
++ bool "Choose QDMA instead PDMA"
++ default n
++ depends on RAETH && RALINK_MT7621
++
++choice
++ prompt "GMAC is connected to"
++ depends on RAETH
++ default GE1_RGMII_FORCE_1000
++
++config GE1_MII_FORCE_100
++ bool "MII_FORCE_100 (10/100M Switch)"
++ depends on (RALINK_RT2880 || RALINK_RT3883 || RALINK_MT7621)
++
++config GE1_MII_AN
++ bool "MII_AN (100Phy)"
++ depends on (RALINK_RT2880 || RALINK_RT3883 || RALINK_MT7621)
++
++config GE1_RVMII_FORCE_100
++ bool "RvMII_FORCE_100 (CPU)"
++ depends on (RALINK_RT2880 || RALINK_RT3883 || RALINK_MT7621)
++
++config GE1_RGMII_FORCE_1000
++ bool "RGMII_FORCE_1000 (GigaSW, CPU)"
++ depends on (RALINK_RT2880 || RALINK_RT3883)
++ select RALINK_SPI
++
++config GE1_RGMII_FORCE_1000
++ bool "RGMII_FORCE_1000 (GigaSW, CPU)"
++ depends on (RALINK_MT7621)
++ select RT_3052_ESW
++
++config GE1_TRGMII_FORCE_1200
++ bool "TRGMII_FORCE_1200 (GigaSW, CPU)"
++ depends on (RALINK_MT7621)
++ select RT_3052_ESW
++
++config GE1_RGMII_AN
++ bool "RGMII_AN (GigaPhy)"
++ depends on (RALINK_RT2880 || RALINK_RT3883 || RALINK_MT7621)
++
++config GE1_RGMII_NONE
++ bool "NONE (NO CONNECT)"
++ depends on (RALINK_MT7621)
++
++endchoice
++
++config RT_3052_ESW
++ bool "Ralink Embedded Switch"
++ default y
++ depends on (RALINK_RT3052 || RALINK_RT3352 || RALINK_RT5350 || RALINK_RT6855 || RALINK_RT6855A || RALINK_MT7620 || RALINK_MT7621 || RALINK_MT7628)
++
++config LAN_WAN_SUPPORT
++ bool "LAN/WAN Partition"
++ depends on RAETH_ROUTER || RT_3052_ESW
++
++choice
++ prompt "Switch Board Layout Type"
++ depends on LAN_WAN_SUPPORT || P5_RGMII_TO_MAC_MODE || GE1_RGMII_FORCE_1000 || GE1_TRGMII_FORCE_1200 || GE2_RGMII_FORCE_1000
++ default WAN_AT_P0
++
++ config WAN_AT_P4
++ bool "LLLL/W"
++
++ config WAN_AT_P0
++ bool "W/LLLL"
++endchoice
++
++config RALINK_VISTA_BASIC
++ bool 'Vista Basic Logo for IC+ 175C'
++ depends on LAN_WAN_SUPPORT && (RALINK_RT2880 || RALINK_RT3883)
++
++config ESW_DOUBLE_VLAN_TAG
++ bool
++ default y if RT_3052_ESW
++
++config RAETH_HAS_PORT4
++ bool "Port 4 Support"
++ depends on RAETH && RALINK_MT7620
++choice
++ prompt "Target Mode"
++ depends on RAETH_HAS_PORT4
++ default P4_RGMII_TO_MAC_MODE
++
++ config P4_MAC_TO_PHY_MODE
++ bool "Giga_Phy (RGMII)"
++ config GE_RGMII_MT7530_P0_AN
++ bool "GE_RGMII_MT7530_P0_AN (MT7530 Internal GigaPhy)"
++ config GE_RGMII_MT7530_P4_AN
++ bool "GE_RGMII_MT7530_P4_AN (MT7530 Internal GigaPhy)"
++ config P4_RGMII_TO_MAC_MODE
++ bool "Giga_SW/iNIC (RGMII)"
++ config P4_MII_TO_MAC_MODE
++ bool "External_CPU (MII_RvMII)"
++ config P4_RMII_TO_MAC_MODE
++ bool "External_CPU (RvMII_MII)"
++endchoice
++
++config MAC_TO_GIGAPHY_MODE_ADDR2
++ hex "Port4 Phy Address"
++ default 0x4
++ depends on P4_MAC_TO_PHY_MODE
++
++config RAETH_HAS_PORT5
++ bool "Port 5 Support"
++ depends on RAETH && (RALINK_RT3052 || RALINK_RT3352 || RALINK_RT6855 || RALINK_RT6855A || RALINK_MT7620)
++choice
++ prompt "Target Mode"
++ depends on RAETH_HAS_PORT5
++ default P5_RGMII_TO_MAC_MODE
++
++ config P5_MAC_TO_PHY_MODE
++ bool "Giga_Phy (RGMII)"
++ config P5_RGMII_TO_MAC_MODE
++ bool "Giga_SW/iNIC (RGMII)"
++ config P5_RGMII_TO_MT7530_MODE
++ bool "MT7530 Giga_SW (RGMII)"
++ depends on RALINK_MT7620
++ config P5_MII_TO_MAC_MODE
++ bool "External_CPU (MII_RvMII)"
++ config P5_RMII_TO_MAC_MODE
++ bool "External_CPU (RvMII_MII)"
++endchoice
++
++config MAC_TO_GIGAPHY_MODE_ADDR
++ hex "GE1 Phy Address"
++ default 0x1F
++ depends on GE1_MII_AN || GE1_RGMII_AN
++
++config MAC_TO_GIGAPHY_MODE_ADDR
++ hex "Port5 Phy Address"
++ default 0x5
++ depends on P5_MAC_TO_PHY_MODE
++
++config RAETH_GMAC2
++ bool "GMAC2 Support"
++ depends on RAETH && (RALINK_RT3883 || RALINK_MT7621)
++
++choice
++ prompt "GMAC2 is connected to"
++ depends on RAETH_GMAC2
++ default GE2_RGMII_AN
++
++config GE2_MII_FORCE_100
++ bool "MII_FORCE_100 (10/100M Switch)"
++ depends on RAETH_GMAC2
++
++config GE2_MII_AN
++ bool "MII_AN (100Phy)"
++ depends on RAETH_GMAC2
++
++config GE2_RVMII_FORCE_100
++ bool "RvMII_FORCE_100 (CPU)"
++ depends on RAETH_GMAC2
++
++config GE2_RGMII_FORCE_1000
++ bool "RGMII_FORCE_1000 (GigaSW, CPU)"
++ depends on RAETH_GMAC2
++ select RALINK_SPI
++
++config GE2_RGMII_AN
++ bool "RGMII_AN (GigaPhy)"
++ depends on RAETH_GMAC2
++
++config GE2_INTERNAL_GPHY
++ bool "Internal GigaPHY"
++ depends on RAETH_GMAC2
++ select LAN_WAN_SUPPORT
++
++endchoice
++
++config GE_RGMII_INTERNAL_P0_AN
++ bool
++ depends on GE2_INTERNAL_GPHY
++ default y if WAN_AT_P0
++
++config GE_RGMII_INTERNAL_P4_AN
++ bool
++ depends on GE2_INTERNAL_GPHY
++ default y if WAN_AT_P4
++
++config MAC_TO_GIGAPHY_MODE_ADDR2
++ hex
++ default 0 if GE_RGMII_INTERNAL_P0_AN
++ default 4 if GE_RGMII_INTERNAL_P4_AN
++ depends on GE_RGMII_INTERNAL_P0_AN || GE_RGMII_INTERNAL_P4_AN
++
++config MAC_TO_GIGAPHY_MODE_ADDR2
++ hex "GE2 Phy Address"
++ default 0x1E
++ depends on GE2_MII_AN || GE2_RGMII_AN
++
++#force 100M
++config RAETH_ROUTER
++bool
++default y if GE1_MII_FORCE_100 || GE2_MII_FORCE_100 || GE1_RVMII_FORCE_100 || GE2_RVMII_FORCE_100
++
++#force 1000M
++config MAC_TO_MAC_MODE
++bool
++default y if GE1_RGMII_FORCE_1000 || GE2_RGMII_FORCE_1000
++depends on (RALINK_RT2880 || RALINK_RT3883)
++
++#AN
++config GIGAPHY
++bool
++default y if GE1_RGMII_AN || GE2_RGMII_AN
++
++#AN
++config 100PHY
++bool
++default y if GE1_MII_AN || GE2_MII_AN
+diff --git a/drivers/net/ethernet/raeth/Makefile b/drivers/net/ethernet/raeth/Makefile
+new file mode 100644
+index 0000000..94c19bd
+--- /dev/null
++++ b/drivers/net/ethernet/raeth/Makefile
+@@ -0,0 +1,7 @@
++obj-$(CONFIG_RAETH) += raeth.o
++raeth-objs := ra_mac.o mii_mgr.o
++raeth-objs += raether_pdma.o
++EXTRA_CFLAGS += -DWORKQUEUE_BH
++#EXTRA_CFLAGS += -DCONFIG_RAETH_MULTIPLE_RX_RING
++
++raeth-objs += raether.o
+diff --git a/drivers/net/ethernet/raeth/ethtool_readme.txt b/drivers/net/ethernet/raeth/ethtool_readme.txt
+new file mode 100644
+index 0000000..10e918b
+--- /dev/null
++++ b/drivers/net/ethernet/raeth/ethtool_readme.txt
+@@ -0,0 +1,44 @@
++
++Ethtool readme for selecting different PHY address.
++
++Before doing any ethtool command you should make sure the current PHY
++address is expected. The default PHY address is 1(port 1).
++
++You can change current PHY address to X(0~4) by doing follow command:
++# echo X > /proc/rt2880/gmac
++
++Ethtool command also would show the current PHY address as following.
++
++# ethtool eth2
++Settings for eth2:
++ Supported ports: [ TP MII ]
++ Supported link modes: 10baseT/Half 10baseT/Full
++ 100baseT/Half 100baseT/Full
++ Supports auto-negotiation: Yes
++ Advertised link modes: 10baseT/Half 10baseT/Full
++ 100baseT/Half 100baseT/Full
++ Advertised auto-negotiation: No
++ Speed: 10Mb/s
++ Duplex: Full
++ Port: MII
++ PHYAD: 1
++ Transceiver: internal
++ Auto-negotiation: off
++ Current message level: 0x00000000 (0)
++ Link detected: no
++
++
++The "PHYAD" field shows the current PHY address.
++
++
++
++Usage example
++1) show port1 info
++# echo 1 > /proc/rt2880/gmac # change phy address to 1
++# ethtool eth2
++
++2) show port0 info
++# echo 0 > /proc/rt2880/gmac # change phy address to 0
++# ethtool eth2
++
++
+diff --git a/drivers/net/ethernet/raeth/mii_mgr.c b/drivers/net/ethernet/raeth/mii_mgr.c
+new file mode 100644
+index 0000000..3de0a74
+--- /dev/null
++++ b/drivers/net/ethernet/raeth/mii_mgr.c
+@@ -0,0 +1,166 @@
++#include <linux/module.h>
++#include <linux/version.h>
++#include <linux/netdevice.h>
++
++#include <linux/kernel.h>
++#include <linux/sched.h>
++#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,0)
++#include <asm/rt2880/rt_mmap.h>
++#endif
++
++#include "ra2882ethreg.h"
++#include "raether.h"
++
++
++#define PHY_CONTROL_0 0x0004
++#define MDIO_PHY_CONTROL_0 (RALINK_ETH_SW_BASE + PHY_CONTROL_0)
++#define enable_mdio(x)
++
++
++u32 __mii_mgr_read(u32 phy_addr, u32 phy_register, u32 *read_data)
++{
++ u32 volatile status = 0;
++ u32 rc = 0;
++ unsigned long volatile t_start = jiffies;
++ u32 volatile data = 0;
++
++ /* We enable mdio gpio purpose register, and disable it when exit. */
++ enable_mdio(1);
++
++ // make sure previous read operation is complete
++ while (1) {
++ // 0 : Read/write operation complete
++ if(!( sysRegRead(MDIO_PHY_CONTROL_0) & (0x1 << 31)))
++ {
++ break;
++ }
++ else if (time_after(jiffies, t_start + 5*HZ)) {
++ enable_mdio(0);
++ printk("\n MDIO Read operation is ongoing !!\n");
++ return rc;
++ }
++ }
++
++ data = (0x01 << 16) | (0x02 << 18) | (phy_addr << 20) | (phy_register << 25);
++ sysRegWrite(MDIO_PHY_CONTROL_0, data);
++ data |= (1<<31);
++ sysRegWrite(MDIO_PHY_CONTROL_0, data);
++ //printk("\n Set Command [0x%08X] to PHY !!\n",MDIO_PHY_CONTROL_0);
++
++
++ // make sure read operation is complete
++ t_start = jiffies;
++ while (1) {
++ if (!(sysRegRead(MDIO_PHY_CONTROL_0) & (0x1 << 31))) {
++ status = sysRegRead(MDIO_PHY_CONTROL_0);
++ *read_data = (u32)(status & 0x0000FFFF);
++
++ enable_mdio(0);
++ return 1;
++ }
++ else if (time_after(jiffies, t_start+5*HZ)) {
++ enable_mdio(0);
++ printk("\n MDIO Read operation is ongoing and Time Out!!\n");
++ return 0;
++ }
++ }
++}
++
++u32 __mii_mgr_write(u32 phy_addr, u32 phy_register, u32 write_data)
++{
++ unsigned long volatile t_start=jiffies;
++ u32 volatile data;
++
++ enable_mdio(1);
++
++ // make sure previous write operation is complete
++ while(1) {
++ if (!(sysRegRead(MDIO_PHY_CONTROL_0) & (0x1 << 31)))
++ {
++ break;
++ }
++ else if (time_after(jiffies, t_start + 5 * HZ)) {
++ enable_mdio(0);
++ printk("\n MDIO Write operation ongoing\n");
++ return 0;
++ }
++ }
++ /*add 1 us delay to make sequencial write more robus*/
++ udelay(1);
++
++ data = (0x01 << 16)| (1<<18) | (phy_addr << 20) | (phy_register << 25) | write_data;
++ sysRegWrite(MDIO_PHY_CONTROL_0, data);
++ data |= (1<<31);
++ sysRegWrite(MDIO_PHY_CONTROL_0, data); //start operation
++ //printk("\n Set Command [0x%08X] to PHY !!\n",MDIO_PHY_CONTROL_0);
++
++ t_start = jiffies;
++
++ // make sure write operation is complete
++ while (1) {
++ if (!(sysRegRead(MDIO_PHY_CONTROL_0) & (0x1 << 31))) //0 : Read/write operation complete
++ {
++ enable_mdio(0);
++ return 1;
++ }
++ else if (time_after(jiffies, t_start + 5 * HZ)) {
++ enable_mdio(0);
++ printk("\n MDIO Write operation Time Out\n");
++ return 0;
++ }
++ }
++}
++
++u32 mii_mgr_read(u32 phy_addr, u32 phy_register, u32 *read_data)
++{
++ u32 low_word;
++ u32 high_word;
++ if(phy_addr==31)
++ {
++ //phase1: write page address phase
++ if(__mii_mgr_write(phy_addr, 0x1f, ((phy_register >> 6) & 0x3FF))) {
++ //phase2: write address & read low word phase
++ if(__mii_mgr_read(phy_addr, (phy_register >> 2) & 0xF, &low_word)) {
++ //phase3: write address & read high word phase
++ if(__mii_mgr_read(phy_addr, (0x1 << 4), &high_word)) {
++ *read_data = (high_word << 16) | (low_word & 0xFFFF);
++ return 1;
++ }
++ }
++ }
++ } else
++ {
++ if(__mii_mgr_read(phy_addr, phy_register, read_data)) {
++ return 1;
++ }
++ }
++
++ return 0;
++}
++
++u32 mii_mgr_write(u32 phy_addr, u32 phy_register, u32 write_data)
++{
++ if(phy_addr == 31)
++ {
++ //phase1: write page address phase
++ if(__mii_mgr_write(phy_addr, 0x1f, (phy_register >> 6) & 0x3FF)) {
++ //phase2: write address & read low word phase
++ if(__mii_mgr_write(phy_addr, ((phy_register >> 2) & 0xF), write_data & 0xFFFF)) {
++ //phase3: write address & read high word phase
++ if(__mii_mgr_write(phy_addr, (0x1 << 4), write_data >> 16)) {
++ return 1;
++ }
++ }
++ }
++ } else
++ {
++ if(__mii_mgr_write(phy_addr, phy_register, write_data)) {
++ return 1;
++ }
++ }
++
++ return 0;
++}
++
++EXPORT_SYMBOL(mii_mgr_write);
++EXPORT_SYMBOL(mii_mgr_read);
+diff --git a/drivers/net/ethernet/raeth/ra2882ethreg.h b/drivers/net/ethernet/raeth/ra2882ethreg.h
+new file mode 100644
+index 0000000..05b789e
+--- /dev/null
++++ b/drivers/net/ethernet/raeth/ra2882ethreg.h
+@@ -0,0 +1,1268 @@
++#ifndef RA2882ETHREG_H
++#define RA2882ETHREG_H
++
++#include <linux/mii.h> // for struct mii_if_info in ra2882ethreg.h
++#include <linux/version.h> /* check linux version for 2.4 and 2.6 compatibility */
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#include <asm/rt2880/rt_mmap.h>
++#endif
++#include "raether.h"
++
++#ifdef WORKQUEUE_BH
++#include <linux/workqueue.h>
++#endif // WORKQUEUE_BH //
++#ifdef CONFIG_RAETH_LRO
++#include <linux/inet_lro.h>
++#endif
++
++#define MAX_PACKET_SIZE 1514
++#define MIN_PACKET_SIZE 60
++
++#define phys_to_bus(a) (a & 0x1FFFFFFF)
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,36)
++#define BIT(x) ((1 << x))
++#endif
++#define ETHER_ADDR_LEN 6
++
++/* Phy Vender ID list */
++
++#define EV_ICPLUS_PHY_ID0 0x0243
++#define EV_ICPLUS_PHY_ID1 0x0D90
++#define EV_MARVELL_PHY_ID0 0x0141
++#define EV_MARVELL_PHY_ID1 0x0CC2
++#define EV_VTSS_PHY_ID0 0x0007
++#define EV_VTSS_PHY_ID1 0x0421
++
++/*
++ FE_INT_STATUS
++*/
++#if defined (CONFIG_RALINK_RT5350) || defined (CONFIG_RALINK_RT6855) || defined(CONFIG_RALINK_RT6855A) || \
++ defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621) || defined (CONFIG_RALINK_MT7628)
++
++#define RX_COHERENT BIT(31)
++#define RX_DLY_INT BIT(30)
++#define TX_COHERENT BIT(29)
++#define TX_DLY_INT BIT(28)
++
++#define RX_DONE_INT1 BIT(17)
++#define RX_DONE_INT0 BIT(16)
++
++#define TX_DONE_INT3 BIT(3)
++#define TX_DONE_INT2 BIT(2)
++#define TX_DONE_INT1 BIT(1)
++#define TX_DONE_INT0 BIT(0)
++
++#if defined (CONFIG_RALINK_MT7621)
++#define RLS_COHERENT BIT(29)
++#define RLS_DLY_INT BIT(28)
++#define RLS_DONE_INT BIT(0)
++#endif
++
++#else
++//#define CNT_PPE_AF BIT(31)
++//#define CNT_GDM_AF BIT(29)
++#define PSE_P2_FC BIT(26)
++#define GDM_CRC_DROP BIT(25)
++#define PSE_BUF_DROP BIT(24)
++#define GDM_OTHER_DROP BIT(23)
++#define PSE_P1_FC BIT(22)
++#define PSE_P0_FC BIT(21)
++#define PSE_FQ_EMPTY BIT(20)
++#define GE1_STA_CHG BIT(18)
++#define TX_COHERENT BIT(17)
++#define RX_COHERENT BIT(16)
++
++#define TX_DONE_INT3 BIT(11)
++#define TX_DONE_INT2 BIT(10)
++#define TX_DONE_INT1 BIT(9)
++#define TX_DONE_INT0 BIT(8)
++#define RX_DONE_INT1 RX_DONE_INT0
++#define RX_DONE_INT0 BIT(2)
++#define TX_DLY_INT BIT(1)
++#define RX_DLY_INT BIT(0)
++#endif
++
++#define FE_INT_ALL (TX_DONE_INT3 | TX_DONE_INT2 | \
++ TX_DONE_INT1 | TX_DONE_INT0 | \
++ RX_DONE_INT0 )
++
++#if defined (CONFIG_RALINK_MT7621)
++#define QFE_INT_ALL (RLS_DONE_INT | RX_DONE_INT0 | RX_DONE_INT1)
++#define QFE_INT_DLY_INIT (RLS_DLY_INT | RX_DLY_INT)
++
++#define NUM_QDMA_PAGE 256
++#define QDMA_PAGE_SIZE 2048
++#endif
++/*
++ * SW_INT_STATUS
++ */
++#if defined (CONFIG_RALINK_RT3052) || defined (CONFIG_RALINK_RT3352) || defined (CONFIG_RALINK_RT5350) || defined (CONFIG_RALINK_MT7628)
++#define PORT0_QUEUE_FULL BIT(14) //port0 queue full
++#define PORT1_QUEUE_FULL BIT(15) //port1 queue full
++#define PORT2_QUEUE_FULL BIT(16) //port2 queue full
++#define PORT3_QUEUE_FULL BIT(17) //port3 queue full
++#define PORT4_QUEUE_FULL BIT(18) //port4 queue full
++#define PORT5_QUEUE_FULL BIT(19) //port5 queue full
++#define PORT6_QUEUE_FULL BIT(20) //port6 queue full
++#define SHARED_QUEUE_FULL BIT(23) //shared queue full
++#define QUEUE_EXHAUSTED BIT(24) //global queue is used up and all packets are dropped
++#define BC_STROM BIT(25) //the device is undergoing broadcast storm
++#define PORT_ST_CHG BIT(26) //Port status change
++#define UNSECURED_ALERT BIT(27) //Intruder alert
++#define ABNORMAL_ALERT BIT(28) //Abnormal
++
++#define ESW_ISR (RALINK_ETH_SW_BASE + 0x00)
++#define ESW_IMR (RALINK_ETH_SW_BASE + 0x04)
++#define ESW_INT_ALL (PORT_ST_CHG)
++
++#elif defined (CONFIG_RALINK_RT6855) || defined(CONFIG_RALINK_RT6855A) || \
++ defined (CONFIG_RALINK_MT7620)
++#define MIB_INT BIT(25)
++#define ACL_INT BIT(24)
++#define P5_LINK_CH BIT(5)
++#define P4_LINK_CH BIT(4)
++#define P3_LINK_CH BIT(3)
++#define P2_LINK_CH BIT(2)
++#define P1_LINK_CH BIT(1)
++#define P0_LINK_CH BIT(0)
++
++#define RX_GOCT_CNT BIT(4)
++#define RX_GOOD_CNT BIT(6)
++#define TX_GOCT_CNT BIT(17)
++#define TX_GOOD_CNT BIT(19)
++
++#define MSK_RX_GOCT_CNT BIT(4)
++#define MSK_RX_GOOD_CNT BIT(6)
++#define MSK_TX_GOCT_CNT BIT(17)
++#define MSK_TX_GOOD_CNT BIT(19)
++#define MSK_CNT_INT_ALL (MSK_RX_GOCT_CNT | MSK_RX_GOOD_CNT | MSK_TX_GOCT_CNT | MSK_TX_GOOD_CNT)
++//#define MSK_CNT_INT_ALL (MSK_RX_GOOD_CNT | MSK_TX_GOOD_CNT)
++
++
++#define ESW_IMR (RALINK_ETH_SW_BASE + 0x7000 + 0x8)
++#define ESW_ISR (RALINK_ETH_SW_BASE + 0x7000 + 0xC)
++#define ESW_INT_ALL (P0_LINK_CH | P1_LINK_CH | P2_LINK_CH | P3_LINK_CH | P4_LINK_CH | P5_LINK_CH | ACL_INT | MIB_INT)
++#define ESW_AISR (RALINK_ETH_SW_BASE + 0x8)
++#define ESW_P0_IntSn (RALINK_ETH_SW_BASE + 0x4004)
++#define ESW_P1_IntSn (RALINK_ETH_SW_BASE + 0x4104)
++#define ESW_P2_IntSn (RALINK_ETH_SW_BASE + 0x4204)
++#define ESW_P3_IntSn (RALINK_ETH_SW_BASE + 0x4304)
++#define ESW_P4_IntSn (RALINK_ETH_SW_BASE + 0x4404)
++#define ESW_P5_IntSn (RALINK_ETH_SW_BASE + 0x4504)
++#define ESW_P6_IntSn (RALINK_ETH_SW_BASE + 0x4604)
++#define ESW_P0_IntMn (RALINK_ETH_SW_BASE + 0x4008)
++#define ESW_P1_IntMn (RALINK_ETH_SW_BASE + 0x4108)
++#define ESW_P2_IntMn (RALINK_ETH_SW_BASE + 0x4208)
++#define ESW_P3_IntMn (RALINK_ETH_SW_BASE + 0x4308)
++#define ESW_P4_IntMn (RALINK_ETH_SW_BASE + 0x4408)
++#define ESW_P5_IntMn (RALINK_ETH_SW_BASE + 0x4508)
++#define ESW_P6_IntMn (RALINK_ETH_SW_BASE + 0x4608)
++
++#if defined (CONFIG_RALINK_MT7620)
++#define ESW_P7_IntSn (RALINK_ETH_SW_BASE + 0x4704)
++#define ESW_P7_IntMn (RALINK_ETH_SW_BASE + 0x4708)
++#endif
++
++
++#define ESW_PHY_POLLING (RALINK_ETH_SW_BASE + 0x7000)
++
++#elif defined (CONFIG_RALINK_MT7621)
++
++#define ESW_PHY_POLLING (RALINK_ETH_SW_BASE + 0x0000)
++
++#define P5_LINK_CH BIT(5)
++#define P4_LINK_CH BIT(4)
++#define P3_LINK_CH BIT(3)
++#define P2_LINK_CH BIT(2)
++#define P1_LINK_CH BIT(1)
++#define P0_LINK_CH BIT(0)
++
++
++#endif // CONFIG_RALINK_RT3052 || CONFIG_RALINK_RT3352 || CONFIG_RALINK_RT5350 || defined (CONFIG_RALINK_MT7628)//
++
++#define RX_BUF_ALLOC_SIZE 2000
++#define FASTPATH_HEADROOM 64
++
++#define ETHER_BUFFER_ALIGN 32 ///// Align on a cache line
++
++#define ETHER_ALIGNED_RX_SKB_ADDR(addr) \
++ ((((unsigned long)(addr) + ETHER_BUFFER_ALIGN - 1) & \
++ ~(ETHER_BUFFER_ALIGN - 1)) - (unsigned long)(addr))
++
++#ifdef CONFIG_PSEUDO_SUPPORT
++typedef struct _PSEUDO_ADAPTER {
++ struct net_device *RaethDev;
++ struct net_device *PseudoDev;
++ struct net_device_stats stat;
++#if defined (CONFIG_ETHTOOL) /*&& defined (CONFIG_RAETH_ROUTER)*/
++ struct mii_if_info mii_info;
++#endif
++
++} PSEUDO_ADAPTER, PPSEUDO_ADAPTER;
++
++#define MAX_PSEUDO_ENTRY 1
++#endif
++
++
++
++/* Register Categories Definition */
++#define RAFRAMEENGINE_OFFSET 0x0000
++#define RAGDMA_OFFSET 0x0020
++#define RAPSE_OFFSET 0x0040
++#define RAGDMA2_OFFSET 0x0060
++#define RACDMA_OFFSET 0x0080
++#if defined (CONFIG_RALINK_RT5350) || defined (CONFIG_RALINK_RT6855) || defined(CONFIG_RALINK_RT6855A) || \
++ defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621) || defined (CONFIG_RALINK_MT7628)
++
++#define RAPDMA_OFFSET 0x0800
++#define SDM_OFFSET 0x0C00
++#else
++#define RAPDMA_OFFSET 0x0100
++#endif
++#define RAPPE_OFFSET 0x0200
++#define RACMTABLE_OFFSET 0x0400
++#define RAPOLICYTABLE_OFFSET 0x1000
++
++
++/* Register Map Detail */
++/* RT3883 */
++#define SYSCFG1 (RALINK_SYSCTL_BASE + 0x14)
++
++#if defined (CONFIG_RALINK_RT5350) || defined (CONFIG_RALINK_MT7628)
++
++/* 1. PDMA */
++#define TX_BASE_PTR0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x000)
++#define TX_MAX_CNT0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x004)
++#define TX_CTX_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x008)
++#define TX_DTX_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x00C)
++
++#define TX_BASE_PTR1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x010)
++#define TX_MAX_CNT1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x014)
++#define TX_CTX_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x018)
++#define TX_DTX_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x01C)
++
++#define TX_BASE_PTR2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x020)
++#define TX_MAX_CNT2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x024)
++#define TX_CTX_IDX2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x028)
++#define TX_DTX_IDX2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x02C)
++
++#define TX_BASE_PTR3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x030)
++#define TX_MAX_CNT3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x034)
++#define TX_CTX_IDX3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x038)
++#define TX_DTX_IDX3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x03C)
++
++#define RX_BASE_PTR0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x100)
++#define RX_MAX_CNT0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x104)
++#define RX_CALC_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x108)
++#define RX_DRX_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x10C)
++
++#define RX_BASE_PTR1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x110)
++#define RX_MAX_CNT1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x114)
++#define RX_CALC_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x118)
++#define RX_DRX_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x11C)
++
++#define PDMA_INFO (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x200)
++#define PDMA_GLO_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x204)
++#define PDMA_RST_IDX (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x208)
++#define PDMA_RST_CFG (PDMA_RST_IDX)
++#define DLY_INT_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x20C)
++#define FREEQ_THRES (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x210)
++#define INT_STATUS (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x220)
++#define FE_INT_STATUS (INT_STATUS)
++#define INT_MASK (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x228)
++#define FE_INT_ENABLE (INT_MASK)
++#define PDMA_WRR (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x280)
++#define PDMA_SCH_CFG (PDMA_WRR)
++
++#define SDM_CON (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x00) //Switch DMA configuration
++#define SDM_RRING (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x04) //Switch DMA Rx Ring
++#define SDM_TRING (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x08) //Switch DMA Tx Ring
++#define SDM_MAC_ADRL (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x0C) //Switch MAC address LSB
++#define SDM_MAC_ADRH (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x10) //Switch MAC Address MSB
++#define SDM_TPCNT (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x100) //Switch DMA Tx packet count
++#define SDM_TBCNT (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x104) //Switch DMA Tx byte count
++#define SDM_RPCNT (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x108) //Switch DMA rx packet count
++#define SDM_RBCNT (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x10C) //Switch DMA rx byte count
++#define SDM_CS_ERR (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x110) //Switch DMA rx checksum error count
++
++#elif defined (CONFIG_RALINK_RT6855) || defined(CONFIG_RALINK_RT6855A) || \
++ defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621)
++
++/* Old FE with New PDMA */
++#define PDMA_RELATED 0x0800
++/* 1. PDMA */
++#define TX_BASE_PTR0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x000)
++#define TX_MAX_CNT0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x004)
++#define TX_CTX_IDX0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x008)
++#define TX_DTX_IDX0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x00C)
++
++#define TX_BASE_PTR1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x010)
++#define TX_MAX_CNT1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x014)
++#define TX_CTX_IDX1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x018)
++#define TX_DTX_IDX1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x01C)
++
++#define TX_BASE_PTR2 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x020)
++#define TX_MAX_CNT2 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x024)
++#define TX_CTX_IDX2 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x028)
++#define TX_DTX_IDX2 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x02C)
++
++#define TX_BASE_PTR3 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x030)
++#define TX_MAX_CNT3 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x034)
++#define TX_CTX_IDX3 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x038)
++#define TX_DTX_IDX3 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x03C)
++
++#define RX_BASE_PTR0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x100)
++#define RX_MAX_CNT0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x104)
++#define RX_CALC_IDX0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x108)
++#define RX_DRX_IDX0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x10C)
++
++#define RX_BASE_PTR1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x110)
++#define RX_MAX_CNT1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x114)
++#define RX_CALC_IDX1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x118)
++#define RX_DRX_IDX1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x11C)
++
++#define PDMA_INFO (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x200)
++#define PDMA_GLO_CFG (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x204)
++#define PDMA_RST_IDX (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x208)
++#define PDMA_RST_CFG (PDMA_RST_IDX)
++#define DLY_INT_CFG (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x20C)
++#define FREEQ_THRES (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x210)
++#define INT_STATUS (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x220)
++#define FE_INT_STATUS (INT_STATUS)
++#define INT_MASK (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x228)
++#define FE_INT_ENABLE (INT_MASK)
++#define SCH_Q01_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x280)
++#define SCH_Q23_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x284)
++
++#define FE_GLO_CFG RALINK_FRAME_ENGINE_BASE + 0x00
++#define FE_RST_GL RALINK_FRAME_ENGINE_BASE + 0x04
++#define FE_INT_STATUS2 RALINK_FRAME_ENGINE_BASE + 0x08
++#define FE_INT_ENABLE2 RALINK_FRAME_ENGINE_BASE + 0x0c
++//#define FC_DROP_STA RALINK_FRAME_ENGINE_BASE + 0x18
++#define FOE_TS_T RALINK_FRAME_ENGINE_BASE + 0x10
++
++#if defined (CONFIG_RALINK_MT7620)
++#define GDMA1_RELATED 0x0600
++#define GDMA1_FWD_CFG (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x00)
++#define GDMA1_SHPR_CFG (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x04)
++#define GDMA1_MAC_ADRL (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x08)
++#define GDMA1_MAC_ADRH (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x0C)
++#elif defined (CONFIG_RALINK_MT7621)
++#define GDMA1_RELATED 0x0500
++#define GDMA1_FWD_CFG (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x00)
++#define GDMA1_SHPR_CFG (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x04)
++#define GDMA1_MAC_ADRL (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x08)
++#define GDMA1_MAC_ADRH (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x0C)
++
++#define GDMA2_RELATED 0x1500
++#define GDMA2_FWD_CFG (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x00)
++#define GDMA2_SHPR_CFG (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x04)
++#define GDMA2_MAC_ADRL (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x08)
++#define GDMA2_MAC_ADRH (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x0C)
++#else
++#define GDMA1_RELATED 0x0020
++#define GDMA1_FWD_CFG (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x00)
++#define GDMA1_SCH_CFG (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x04)
++#define GDMA1_SHPR_CFG (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x08)
++#define GDMA1_MAC_ADRL (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x0C)
++#define GDMA1_MAC_ADRH (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x10)
++
++#define GDMA2_RELATED 0x0060
++#define GDMA2_FWD_CFG (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x00)
++#define GDMA2_SCH_CFG (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x04)
++#define GDMA2_SHPR_CFG (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x08)
++#define GDMA2_MAC_ADRL (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x0C)
++#define GDMA2_MAC_ADRH (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x10)
++#endif
++
++#if defined (CONFIG_RALINK_MT7620)
++#define PSE_RELATED 0x0500
++#define PSE_FQFC_CFG (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x00)
++#define PSE_IQ_CFG (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x04)
++#define PSE_QUE_STA (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x08)
++#else
++#define PSE_RELATED 0x0040
++#define PSE_FQ_CFG (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x00)
++#define CDMA_FC_CFG (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x04)
++#define GDMA1_FC_CFG (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x08)
++#define GDMA2_FC_CFG (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x0C)
++#define CDMA_OQ_STA (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x10)
++#define GDMA1_OQ_STA (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x14)
++#define GDMA2_OQ_STA (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x18)
++#define PSE_IQ_STA (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x1C)
++#endif
++
++
++#if defined (CONFIG_RALINK_MT7620)
++#define CDMA_RELATED 0x0400
++#define CDMA_CSG_CFG (RALINK_FRAME_ENGINE_BASE + CDMA_RELATED + 0x00)
++#define SMACCR0 (RALINK_ETH_SW_BASE + 0x3FE4)
++#define SMACCR1 (RALINK_ETH_SW_BASE + 0x3FE8)
++#define CKGCR (RALINK_ETH_SW_BASE + 0x3FF0)
++#elif defined (CONFIG_RALINK_MT7621)
++#define CDMA_RELATED 0x0400
++#define CDMA_CSG_CFG (RALINK_FRAME_ENGINE_BASE + CDMA_RELATED + 0x00) //fake definition
++#define CDMP_IG_CTRL (RALINK_FRAME_ENGINE_BASE + CDMA_RELATED + 0x00)
++#define CDMP_EG_CTRL (RALINK_FRAME_ENGINE_BASE + CDMA_RELATED + 0x04)
++#else
++#define CDMA_RELATED 0x0080
++#define CDMA_CSG_CFG (RALINK_FRAME_ENGINE_BASE + CDMA_RELATED + 0x00)
++#define CDMA_SCH_CFG (RALINK_FRAME_ENGINE_BASE + CDMA_RELATED + 0x04)
++#define SMACCR0 (RALINK_ETH_SW_BASE + 0x30E4)
++#define SMACCR1 (RALINK_ETH_SW_BASE + 0x30E8)
++#define CKGCR (RALINK_ETH_SW_BASE + 0x30F0)
++#endif
++
++#define PDMA_FC_CFG (RALINK_FRAME_ENGINE_BASE+0x100)
++
++
++#if defined (CONFIG_RALINK_MT7621)
++/*kurtis: add QDMA define*/
++
++#define CLK_CFG_0 (RALINK_SYSCTL_BASE + 0x2C)
++#define PAD_RGMII2_MDIO_CFG (RALINK_SYSCTL_BASE + 0x58)
++
++#define QDMA_RELATED 0x1800
++#define QTX_CFG_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x000)
++#define QTX_SCH_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x004)
++#define QTX_HEAD_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x008)
++#define QTX_TAIL_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x00C)
++#define QTX_CFG_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x010)
++#define QTX_SCH_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x014)
++#define QTX_HEAD_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x018)
++#define QTX_TAIL_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x01C)
++#define QTX_CFG_2 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x020)
++#define QTX_SCH_2 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x024)
++#define QTX_HEAD_2 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x028)
++#define QTX_TAIL_2 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x02C)
++#define QTX_CFG_3 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x030)
++#define QTX_SCH_3 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x034)
++#define QTX_HEAD_3 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x038)
++#define QTX_TAIL_3 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x03C)
++#define QTX_CFG_4 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x040)
++#define QTX_SCH_4 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x044)
++#define QTX_HEAD_4 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x048)
++#define QTX_TAIL_4 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x04C)
++#define QTX_CFG_5 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x050)
++#define QTX_SCH_5 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x054)
++#define QTX_HEAD_5 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x058)
++#define QTX_TAIL_5 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x05C)
++#define QTX_CFG_6 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x060)
++#define QTX_SCH_6 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x064)
++#define QTX_HEAD_6 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x068)
++#define QTX_TAIL_6 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x06C)
++#define QTX_CFG_7 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x070)
++#define QTX_SCH_7 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x074)
++#define QTX_HEAD_7 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x078)
++#define QTX_TAIL_7 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x07C)
++#define QTX_CFG_8 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x080)
++#define QTX_SCH_8 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x084)
++#define QTX_HEAD_8 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x088)
++#define QTX_TAIL_8 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x08C)
++#define QTX_CFG_9 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x090)
++#define QTX_SCH_9 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x094)
++#define QTX_HEAD_9 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x098)
++#define QTX_TAIL_9 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x09C)
++#define QTX_CFG_10 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0A0)
++#define QTX_SCH_10 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0A4)
++#define QTX_HEAD_10 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0A8)
++#define QTX_TAIL_10 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0AC)
++#define QTX_CFG_11 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0B0)
++#define QTX_SCH_11 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0B4)
++#define QTX_HEAD_11 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0B8)
++#define QTX_TAIL_11 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0BC)
++#define QTX_CFG_12 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0C0)
++#define QTX_SCH_12 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0C4)
++#define QTX_HEAD_12 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0C8)
++#define QTX_TAIL_12 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0CC)
++#define QTX_CFG_13 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0D0)
++#define QTX_SCH_13 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0D4)
++#define QTX_HEAD_13 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0D8)
++#define QTX_TAIL_13 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0DC)
++#define QTX_CFG_14 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0E0)
++#define QTX_SCH_14 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0E4)
++#define QTX_HEAD_14 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0E8)
++#define QTX_TAIL_14 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0EC)
++#define QTX_CFG_15 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0F0)
++#define QTX_SCH_15 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0F4)
++#define QTX_HEAD_15 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0F8)
++#define QTX_TAIL_15 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0FC)
++#define QRX_BASE_PTR_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x100)
++#define QRX_MAX_CNT_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x104)
++#define QRX_CRX_IDX_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x108)
++#define QRX_DRX_IDX_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x10C)
++#define QRX_BASE_PTR_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x110)
++#define QRX_MAX_CNT_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x114)
++#define QRX_CRX_IDX_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x118)
++#define QRX_DRX_IDX_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x11C)
++#define QDMA_INFO (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x200)
++#define QDMA_GLO_CFG (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x204)
++#define QDMA_RST_IDX (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x208)
++#define QDMA_RST_CFG (QDMA_RST_IDX)
++#define QDMA_DELAY_INT (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x20C)
++#define QDMA_FC_THRES (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x210)
++#define QDMA_TX_SCH (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x214)
++#define QDMA_INT_STS (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x218)
++#define QFE_INT_STATUS (QDMA_INT_STS)
++#define QDMA_INT_MASK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x21C)
++#define QFE_INT_ENABLE (QDMA_INT_MASK)
++#define QDMA_TRTCM (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x220)
++#define QDMA_DATA0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x224)
++#define QDMA_DATA1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x228)
++#define QDMA_RED_THRES (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x22C)
++#define QDMA_TEST (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x230)
++#define QDMA_DMA (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x234)
++#define QDMA_BMU (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x238)
++#define QDMA_HRED1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x240)
++#define QDMA_HRED2 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x244)
++#define QDMA_SRED1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x248)
++#define QDMA_SRED2 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x24C)
++#define QTX_CTX_PTR (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x300)
++#define QTX_DTX_PTR (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x304)
++#define QTX_FWD_CNT (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x308)
++#define QTX_CRX_PTR (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x310)
++#define QTX_DRX_PTR (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x314)
++#define QTX_RLS_CNT (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x318)
++#define QDMA_FQ_HEAD (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x320)
++#define QDMA_FQ_TAIL (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x324)
++#define QDMA_FQ_CNT (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x328)
++#define QDMA_FQ_BLEN (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x32C)
++#define QTX_Q0MIN_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x350)
++#define QTX_Q1MIN_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x354)
++#define QTX_Q2MIN_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x358)
++#define QTX_Q3MIN_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x35C)
++#define QTX_Q0MAX_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x360)
++#define QTX_Q1MAX_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x364)
++#define QTX_Q2MAX_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x368)
++#define QTX_Q3MAX_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x36C)
++
++
++#endif/*MT7621 QDMA*/
++
++#else
++
++/* 1. Frame Engine Global Registers */
++#define MDIO_ACCESS (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x00)
++#define MDIO_CFG (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x04)
++#define FE_GLO_CFG (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x08)
++#define FE_RST_GL (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x0C)
++#define FE_INT_STATUS (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x10)
++#define FE_INT_ENABLE (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x14)
++#define MDIO_CFG2 (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x18) //Original:FC_DROP_STA
++#define FOC_TS_T (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x1C)
++
++
++/* 2. GDMA Registers */
++#define GDMA1_FWD_CFG (RALINK_FRAME_ENGINE_BASE+RAGDMA_OFFSET+0x00)
++#define GDMA1_SCH_CFG (RALINK_FRAME_ENGINE_BASE+RAGDMA_OFFSET+0x04)
++#define GDMA1_SHPR_CFG (RALINK_FRAME_ENGINE_BASE+RAGDMA_OFFSET+0x08)
++#define GDMA1_MAC_ADRL (RALINK_FRAME_ENGINE_BASE+RAGDMA_OFFSET+0x0C)
++#define GDMA1_MAC_ADRH (RALINK_FRAME_ENGINE_BASE+RAGDMA_OFFSET+0x10)
++
++#define GDMA2_FWD_CFG (RALINK_FRAME_ENGINE_BASE+RAGDMA2_OFFSET+0x00)
++#define GDMA2_SCH_CFG (RALINK_FRAME_ENGINE_BASE+RAGDMA2_OFFSET+0x04)
++#define GDMA2_SHPR_CFG (RALINK_FRAME_ENGINE_BASE+RAGDMA2_OFFSET+0x08)
++#define GDMA2_MAC_ADRL (RALINK_FRAME_ENGINE_BASE+RAGDMA2_OFFSET+0x0C)
++#define GDMA2_MAC_ADRH (RALINK_FRAME_ENGINE_BASE+RAGDMA2_OFFSET+0x10)
++
++/* 3. PSE */
++#define PSE_FQ_CFG (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x00)
++#define CDMA_FC_CFG (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x04)
++#define GDMA1_FC_CFG (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x08)
++#define GDMA2_FC_CFG (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x0C)
++#define PDMA_FC_CFG (RALINK_FRAME_ENGINE_BASE+0x1f0)
++
++/* 4. CDMA */
++#define CDMA_CSG_CFG (RALINK_FRAME_ENGINE_BASE+RACDMA_OFFSET+0x00)
++#define CDMA_SCH_CFG (RALINK_FRAME_ENGINE_BASE+RACDMA_OFFSET+0x04)
++/* skip ppoe sid and vlan id definition */
++
++
++/* 5. PDMA */
++#define PDMA_GLO_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x00)
++#define PDMA_RST_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x04)
++#define PDMA_SCH_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x08)
++
++#define DLY_INT_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x0C)
++
++#define TX_BASE_PTR0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x10)
++#define TX_MAX_CNT0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x14)
++#define TX_CTX_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x18)
++#define TX_DTX_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x1C)
++
++#define TX_BASE_PTR1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x20)
++#define TX_MAX_CNT1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x24)
++#define TX_CTX_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x28)
++#define TX_DTX_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x2C)
++
++#define TX_BASE_PTR2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x40)
++#define TX_MAX_CNT2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x44)
++#define TX_CTX_IDX2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x48)
++#define TX_DTX_IDX2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x4C)
++
++#define TX_BASE_PTR3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x50)
++#define TX_MAX_CNT3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x54)
++#define TX_CTX_IDX3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x58)
++#define TX_DTX_IDX3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x5C)
++
++#define RX_BASE_PTR0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x30)
++#define RX_MAX_CNT0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x34)
++#define RX_CALC_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x38)
++#define RX_DRX_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x3C)
++
++#define RX_BASE_PTR1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x40)
++#define RX_MAX_CNT1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x44)
++#define RX_CALC_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x48)
++#define RX_DRX_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x4C)
++
++#endif
++
++#define DELAY_INT_INIT 0x84048404
++#define FE_INT_DLY_INIT (TX_DLY_INT | RX_DLY_INT)
++
++
++#if !defined (CONFIG_RALINK_RT5350) && !defined (CONFIG_RALINK_MT7628)
++
++/* 6. Counter and Meter Table */
++#define PPE_AC_BCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x000) /* PPE Accounting Group 0 Byte Cnt */
++#define PPE_AC_PCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x004) /* PPE Accounting Group 0 Packet Cnt */
++/* 0 ~ 63 */
++
++#define PPE_MTR_CNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x200) /* 0 ~ 63 */
++/* skip... */
++#define PPE_MTR_CNT63 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x2FC)
++
++#define GDMA_TX_GBCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x300) /* Transmit good byte cnt for GEport */
++#define GDMA_TX_GPCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x304) /* Transmit good pkt cnt for GEport */
++#define GDMA_TX_SKIPCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x308) /* Transmit skip cnt for GEport */
++#define GDMA_TX_COLCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x30C) /* Transmit collision cnt for GEport */
++
++/* update these address mapping to fit data sheet v0.26, by bobtseng, 2007.6.14 */
++#define GDMA_RX_GBCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x320)
++#define GDMA_RX_GPCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x324)
++#define GDMA_RX_OERCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x328)
++#define GDMA_RX_FERCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x32C)
++#define GDMA_RX_SERCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x330)
++#define GDMA_RX_LERCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x334)
++#define GDMA_RX_CERCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x338)
++#define GDMA_RX_FCCNT1 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x33C)
++
++#endif
++
++
++/* Per Port Packet Counts in RT3052, added by bobtseng 2009.4.17. */
++#define PORT0_PKCOUNT (0xb01100e8)
++#define PORT1_PKCOUNT (0xb01100ec)
++#define PORT2_PKCOUNT (0xb01100f0)
++#define PORT3_PKCOUNT (0xb01100f4)
++#define PORT4_PKCOUNT (0xb01100f8)
++#define PORT5_PKCOUNT (0xb01100fc)
++
++
++// PHYS_TO_K1
++#define PHYS_TO_K1(physaddr) KSEG1ADDR(physaddr)
++
++
++#define sysRegRead(phys) \
++ (*(volatile unsigned int *)PHYS_TO_K1(phys))
++
++#define sysRegWrite(phys, val) \
++ ((*(volatile unsigned int *)PHYS_TO_K1(phys)) = (val))
++
++#define u_long unsigned long
++#define u32 unsigned int
++#define u16 unsigned short
++
++
++/* ====================================== */
++#define GDM1_DISPAD BIT(18)
++#define GDM1_DISCRC BIT(17)
++
++//GDMA1 uni-cast frames destination port
++#define GDM1_ICS_EN (0x1 << 22)
++#define GDM1_TCS_EN (0x1 << 21)
++#define GDM1_UCS_EN (0x1 << 20)
++#define GDM1_JMB_EN (0x1 << 19)
++#define GDM1_STRPCRC (0x1 << 16)
++#define GDM1_UFRC_P_CPU (0 << 12)
++#if defined (CONFIG_RALINK_MT7621)
++#define GDM1_UFRC_P_PPE (4 << 12)
++#else
++#define GDM1_UFRC_P_PPE (6 << 12)
++#endif
++
++//GDMA1 broad-cast MAC address frames
++#define GDM1_BFRC_P_CPU (0 << 8)
++#if defined (CONFIG_RALINK_MT7621)
++#define GDM1_BFRC_P_PPE (4 << 8)
++#else
++#define GDM1_BFRC_P_PPE (6 << 8)
++#endif
++
++//GDMA1 multi-cast MAC address frames
++#define GDM1_MFRC_P_CPU (0 << 4)
++#if defined (CONFIG_RALINK_MT7621)
++#define GDM1_MFRC_P_PPE (4 << 4)
++#else
++#define GDM1_MFRC_P_PPE (6 << 4)
++#endif
++
++//GDMA1 other MAC address frames destination port
++#define GDM1_OFRC_P_CPU (0 << 0)
++#if defined (CONFIG_RALINK_MT7621)
++#define GDM1_OFRC_P_PPE (4 << 0)
++#else
++#define GDM1_OFRC_P_PPE (6 << 0)
++#endif
++
++#if defined (CONFIG_RALINK_RT6856) || defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621)
++/* checksum generator registers are removed */
++#define ICS_GEN_EN (0 << 2)
++#define UCS_GEN_EN (0 << 1)
++#define TCS_GEN_EN (0 << 0)
++#else
++#define ICS_GEN_EN (1 << 2)
++#define UCS_GEN_EN (1 << 1)
++#define TCS_GEN_EN (1 << 0)
++#endif
++
++// MDIO_CFG bit
++#define MDIO_CFG_GP1_FC_TX (1 << 11)
++#define MDIO_CFG_GP1_FC_RX (1 << 10)
++
++/* ====================================== */
++/* ====================================== */
++#define GP1_LNK_DWN BIT(9)
++#define GP1_AN_FAIL BIT(8)
++/* ====================================== */
++/* ====================================== */
++#define PSE_RESET BIT(0)
++/* ====================================== */
++#define PST_DRX_IDX1 BIT(17)
++#define PST_DRX_IDX0 BIT(16)
++#define PST_DTX_IDX3 BIT(3)
++#define PST_DTX_IDX2 BIT(2)
++#define PST_DTX_IDX1 BIT(1)
++#define PST_DTX_IDX0 BIT(0)
++
++#define RX_2B_OFFSET BIT(31)
++#define DESC_32B_EN BIT(8)
++#define TX_WB_DDONE BIT(6)
++#define RX_DMA_BUSY BIT(3)
++#define TX_DMA_BUSY BIT(1)
++#define RX_DMA_EN BIT(2)
++#define TX_DMA_EN BIT(0)
++
++#define PDMA_BT_SIZE_4DWORDS (0<<4)
++#define PDMA_BT_SIZE_8DWORDS (1<<4)
++#define PDMA_BT_SIZE_16DWORDS (2<<4)
++#define PDMA_BT_SIZE_32DWORDS (3<<4)
++
++/* Register bits.
++ */
++
++#define MACCFG_RXEN (1<<2)
++#define MACCFG_TXEN (1<<3)
++#define MACCFG_PROMISC (1<<18)
++#define MACCFG_RXMCAST (1<<19)
++#define MACCFG_FDUPLEX (1<<20)
++#define MACCFG_PORTSEL (1<<27)
++#define MACCFG_HBEATDIS (1<<28)
++
++
++#define DMACTL_SR (1<<1) /* Start/Stop Receive */
++#define DMACTL_ST (1<<13) /* Start/Stop Transmission Command */
++
++#define DMACFG_SWR (1<<0) /* Software Reset */
++#define DMACFG_BURST32 (32<<8)
++
++#define DMASTAT_TS 0x00700000 /* Transmit Process State */
++#define DMASTAT_RS 0x000e0000 /* Receive Process State */
++
++#define MACCFG_INIT 0 //(MACCFG_FDUPLEX) // | MACCFG_PORTSEL)
++
++
++
++/* Descriptor bits.
++ */
++#define R_OWN 0x80000000 /* Own Bit */
++#define RD_RER 0x02000000 /* Receive End Of Ring */
++#define RD_LS 0x00000100 /* Last Descriptor */
++#define RD_ES 0x00008000 /* Error Summary */
++#define RD_CHAIN 0x01000000 /* Chained */
++
++/* Word 0 */
++#define T_OWN 0x80000000 /* Own Bit */
++#define TD_ES 0x00008000 /* Error Summary */
++
++/* Word 1 */
++#define TD_LS 0x40000000 /* Last Segment */
++#define TD_FS 0x20000000 /* First Segment */
++#define TD_TER 0x08000000 /* Transmit End Of Ring */
++#define TD_CHAIN 0x01000000 /* Chained */
++
++
++#define TD_SET 0x08000000 /* Setup Packet */
++
++
++#define POLL_DEMAND 1
++
++#define RSTCTL (0x34)
++#define RSTCTL_RSTENET1 (1<<19)
++#define RSTCTL_RSTENET2 (1<<20)
++
++#define INIT_VALUE_OF_RT2883_PSE_FQ_CFG 0xff908000
++#define INIT_VALUE_OF_PSE_FQFC_CFG 0x80504000
++#define INIT_VALUE_OF_FORCE_100_FD 0x1001BC01
++#define INIT_VALUE_OF_FORCE_1000_FD 0x1F01DC01
++
++// Define Whole FE Reset Register
++#define RSTCTRL (RALINK_SYSCTL_BASE + 0x34)
++
++/*=========================================
++ PDMA RX Descriptor Format define
++=========================================*/
++
++//-------------------------------------------------
++typedef struct _PDMA_RXD_INFO1_ PDMA_RXD_INFO1_T;
++
++struct _PDMA_RXD_INFO1_
++{
++ unsigned int PDP0;
++};
++//-------------------------------------------------
++typedef struct _PDMA_RXD_INFO2_ PDMA_RXD_INFO2_T;
++
++struct _PDMA_RXD_INFO2_
++{
++ unsigned int PLEN1 : 14;
++ unsigned int LS1 : 1;
++ unsigned int TAG : 1;
++ unsigned int PLEN0 : 14;
++ unsigned int LS0 : 1;
++ unsigned int DDONE_bit : 1;
++};
++//-------------------------------------------------
++typedef struct _PDMA_RXD_INFO3_ PDMA_RXD_INFO3_T;
++
++struct _PDMA_RXD_INFO3_
++{
++ unsigned int VID:16;
++ unsigned int TPID:16;
++};
++//-------------------------------------------------
++typedef struct _PDMA_RXD_INFO4_ PDMA_RXD_INFO4_T;
++
++struct _PDMA_RXD_INFO4_
++{
++#if defined (CONFIG_RALINK_MT7620)
++ unsigned int FOE_Entry : 14;
++ unsigned int CRSN : 5;
++ unsigned int SPORT : 3;
++ unsigned int L4F : 1;
++ unsigned int L4VLD : 1;
++ unsigned int TACK : 1;
++ unsigned int IP4F : 1;
++ unsigned int IP4 : 1;
++ unsigned int IP6 : 1;
++ unsigned int UN_USE1 : 4;
++#elif defined (CONFIG_RALINK_MT7621)
++ unsigned int FOE_Entry : 14;
++ unsigned int CRSN : 5;
++ unsigned int SP : 4;
++ unsigned int L4F : 1;
++ unsigned int L4VLD : 1;
++ unsigned int TACK : 1;
++ unsigned int IP4F : 1;
++ unsigned int IP4 : 1;
++ unsigned int IP6 : 1;
++ unsigned int UN_USE1 : 3;
++#else
++ unsigned int FOE_Entry : 14;
++ unsigned int FVLD : 1;
++ unsigned int UN_USE1 : 1;
++ unsigned int AI : 8;
++ unsigned int SP : 3;
++ unsigned int AIS : 1;
++ unsigned int L4F : 1;
++ unsigned int IPF : 1;
++ unsigned int L4FVLD_bit : 1;
++ unsigned int IPFVLD_bit : 1;
++#endif
++};
++
++
++struct PDMA_rxdesc {
++ PDMA_RXD_INFO1_T rxd_info1;
++ PDMA_RXD_INFO2_T rxd_info2;
++ PDMA_RXD_INFO3_T rxd_info3;
++ PDMA_RXD_INFO4_T rxd_info4;
++#ifdef CONFIG_32B_DESC
++ unsigned int rxd_info5;
++ unsigned int rxd_info6;
++ unsigned int rxd_info7;
++ unsigned int rxd_info8;
++#endif
++};
++
++/*=========================================
++ PDMA TX Descriptor Format define
++=========================================*/
++//-------------------------------------------------
++typedef struct _PDMA_TXD_INFO1_ PDMA_TXD_INFO1_T;
++
++struct _PDMA_TXD_INFO1_
++{
++ unsigned int SDP0;
++};
++//-------------------------------------------------
++typedef struct _PDMA_TXD_INFO2_ PDMA_TXD_INFO2_T;
++
++struct _PDMA_TXD_INFO2_
++{
++ unsigned int SDL1 : 14;
++ unsigned int LS1_bit : 1;
++ unsigned int BURST_bit : 1;
++ unsigned int SDL0 : 14;
++ unsigned int LS0_bit : 1;
++ unsigned int DDONE_bit : 1;
++};
++//-------------------------------------------------
++typedef struct _PDMA_TXD_INFO3_ PDMA_TXD_INFO3_T;
++
++struct _PDMA_TXD_INFO3_
++{
++ unsigned int SDP1;
++};
++//-------------------------------------------------
++typedef struct _PDMA_TXD_INFO4_ PDMA_TXD_INFO4_T;
++
++struct _PDMA_TXD_INFO4_
++{
++#if defined (CONFIG_RALINK_MT7620)
++ unsigned int VPRI_VIDX : 8;
++ unsigned int SIDX : 4;
++ unsigned int INSP : 1;
++ unsigned int RESV : 2;
++ unsigned int UDF : 5;
++ unsigned int FP_BMAP : 8;
++ unsigned int TSO : 1;
++ unsigned int TUI_CO : 3;
++#elif defined (CONFIG_RALINK_MT7621)
++ unsigned int VLAN_TAG :17; // INSV(1)+VPRI(3)+CFI(1)+VID(12)
++ unsigned int RESV : 2;
++ unsigned int UDF : 6;
++ unsigned int FPORT : 3;
++ unsigned int TSO : 1;
++ unsigned int TUI_CO : 3;
++#else
++ unsigned int VPRI_VIDX : 8;
++ unsigned int SIDX : 4;
++ unsigned int INSP : 1;
++ unsigned int RESV : 1;
++ unsigned int UN_USE3 : 2;
++ unsigned int QN : 3;
++ unsigned int UN_USE2 : 1;
++ unsigned int UDF : 4;
++ unsigned int PN : 3;
++ unsigned int UN_USE1 : 1;
++ unsigned int TSO : 1;
++ unsigned int TUI_CO : 3;
++#endif
++};
++
++
++struct PDMA_txdesc {
++ PDMA_TXD_INFO1_T txd_info1;
++ PDMA_TXD_INFO2_T txd_info2;
++ PDMA_TXD_INFO3_T txd_info3;
++ PDMA_TXD_INFO4_T txd_info4;
++#ifdef CONFIG_32B_DESC
++ unsigned int txd_info5;
++ unsigned int txd_info6;
++ unsigned int txd_info7;
++ unsigned int txd_info8;
++#endif
++};
++
++
++#if defined (CONFIG_RALINK_MT7621)
++/*=========================================
++ QDMA TX Descriptor Format define
++=========================================*/
++//-------------------------------------------------
++typedef struct _QDMA_TXD_INFO1_ QDMA_TXD_INFO1_T;
++
++struct _QDMA_TXD_INFO1_
++{
++ unsigned int SDP;
++};
++//-------------------------------------------------
++typedef struct _QDMA_TXD_INFO2_ QDMA_TXD_INFO2_T;
++
++struct _QDMA_TXD_INFO2_
++{
++ unsigned int NDP;
++};
++//-------------------------------------------------
++typedef struct _QDMA_TXD_INFO3_ QDMA_TXD_INFO3_T;
++
++struct _QDMA_TXD_INFO3_
++{
++ unsigned int QID : 4;
++ unsigned int RESV : 10;
++ unsigned int SWC_bit : 1;
++ unsigned int BURST_bit : 1;
++ unsigned int SDL : 14;
++ unsigned int LS_bit : 1;
++ unsigned int OWN_bit : 1;
++};
++//-------------------------------------------------
++typedef struct _QDMA_TXD_INFO4_ QDMA_TXD_INFO4_T;
++
++struct _QDMA_TXD_INFO4_
++{
++ unsigned int VLAN_TAG :17; // INSV(1)+VPRI(3)+CFI(1)+VID(12)
++ unsigned int RESV : 2;
++ unsigned int UDF : 6;
++ unsigned int FPORT : 3;
++ unsigned int TSO : 1;
++ unsigned int TUI_CO : 3;
++};
++
++
++struct QDMA_txdesc {
++ QDMA_TXD_INFO1_T txd_info1;
++ QDMA_TXD_INFO2_T txd_info2;
++ QDMA_TXD_INFO3_T txd_info3;
++ QDMA_TXD_INFO4_T txd_info4;
++#ifdef CONFIG_32B_DESC
++ unsigned int txd_info5;
++ unsigned int txd_info6;
++ unsigned int txd_info7;
++ unsigned int txd_info8;
++#endif
++};
++#endif
++
++#define phys_to_bus(a) (a & 0x1FFFFFFF)
++
++#define PHY_Enable_Auto_Nego 0x1000
++#define PHY_Restart_Auto_Nego 0x0200
++
++/* PHY_STAT_REG = 1; */
++#define PHY_Auto_Neco_Comp 0x0020
++#define PHY_Link_Status 0x0004
++
++/* PHY_AUTO_NEGO_REG = 4; */
++#define PHY_Cap_10_Half 0x0020
++#define PHY_Cap_10_Full 0x0040
++#define PHY_Cap_100_Half 0x0080
++#define PHY_Cap_100_Full 0x0100
++
++/* proc definition */
++
++#if !defined (CONFIG_RALINK_RT6855) && !defined(CONFIG_RALINK_RT6855A) && \
++ !defined (CONFIG_RALINK_MT7620) && !defined (CONFIG_RALINK_MT7621)
++#define CDMA_OQ_STA (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x4c)
++#define GDMA1_OQ_STA (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x50)
++#define PPE_OQ_STA (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x54)
++#define PSE_IQ_STA (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x58)
++#endif
++
++#define PROCREG_CONTROL_FILE "/var/run/procreg_control"
++#if defined (CONFIG_RALINK_RT2880)
++#define PROCREG_DIR "rt2880"
++#elif defined (CONFIG_RALINK_RT3052)
++#define PROCREG_DIR "rt3052"
++#elif defined (CONFIG_RALINK_RT3352)
++#define PROCREG_DIR "rt3352"
++#elif defined (CONFIG_RALINK_RT5350)
++#define PROCREG_DIR "rt5350"
++#elif defined (CONFIG_RALINK_RT2883)
++#define PROCREG_DIR "rt2883"
++#elif defined (CONFIG_RALINK_RT3883)
++#define PROCREG_DIR "rt3883"
++#elif defined (CONFIG_RALINK_RT6855)
++#define PROCREG_DIR "rt6855"
++#elif defined (CONFIG_RALINK_MT7620)
++#define PROCREG_DIR "mt7620"
++#elif defined (CONFIG_RALINK_MT7621)
++#define PROCREG_DIR "mt7621"
++#elif defined (CONFIG_RALINK_MT7628)
++#define PROCREG_DIR "mt7628"
++#elif defined (CONFIG_RALINK_RT6855A)
++#define PROCREG_DIR "rt6855a"
++#else
++#define PROCREG_DIR "rt2880"
++#endif
++#define PROCREG_SKBFREE "skb_free"
++#define PROCREG_TXRING "tx_ring"
++#define PROCREG_RXRING "rx_ring"
++#define PROCREG_NUM_OF_TXD "num_of_txd"
++#define PROCREG_TSO_LEN "tso_len"
++#define PROCREG_LRO_STATS "lro_stats"
++#define PROCREG_GMAC "gmac"
++#define PROCREG_GMAC2 "gmac2"
++#define PROCREG_CP0 "cp0"
++#define PROCREG_RAQOS "qos"
++#define PROCREG_READ_VAL "regread_value"
++#define PROCREG_WRITE_VAL "regwrite_value"
++#define PROCREG_ADDR "reg_addr"
++#define PROCREG_CTL "procreg_control"
++#define PROCREG_RXDONE_INTR "rxdone_intr_count"
++#define PROCREG_ESW_INTR "esw_intr_count"
++#define PROCREG_ESW_CNT "esw_cnt"
++#define PROCREG_SNMP "snmp"
++#if defined (TASKLET_WORKQUEUE_SW)
++#define PROCREG_SCHE "schedule"
++#endif
++#define PROCREG_QDMA "qdma"
++
++struct rt2880_reg_op_data {
++ char name[64];
++ unsigned int reg_addr;
++ unsigned int op;
++ unsigned int reg_value;
++};
++
++#ifdef CONFIG_RAETH_LRO
++struct lro_counters {
++ u32 lro_aggregated;
++ u32 lro_flushed;
++ u32 lro_no_desc;
++};
++
++struct lro_para_struct {
++ unsigned int lan_ip1;
++};
++
++#endif // CONFIG_RAETH_LRO //
++
++
++
++
++typedef struct end_device
++{
++
++ unsigned int tx_cpu_owner_idx0;
++ unsigned int rx_cpu_owner_idx0;
++ unsigned int fe_int_status;
++ unsigned int tx_full;
++
++#if !defined (CONFIG_RAETH_QDMA)
++ unsigned int phy_tx_ring0;
++#else
++ /* QDMA Tx PTR */
++ struct sk_buff *free_skb[NUM_TX_DESC];
++ unsigned int tx_dma_ptr;
++ unsigned int tx_cpu_ptr;
++ unsigned int free_txd_num;
++ unsigned int free_txd_head;
++ unsigned int free_txd_tail;
++ struct QDMA_txdesc *txd_pool;
++ dma_addr_t phy_txd_pool;
++// unsigned int phy_txd_pool;
++ unsigned int txd_pool_info[NUM_TX_DESC];
++#endif
++
++ unsigned int phy_rx_ring0, phy_rx_ring1;
++
++#if defined (CONFIG_RALINK_RT3052) || defined (CONFIG_RALINK_RT3352) || \
++ defined (CONFIG_RALINK_RT5350) || defined (CONFIG_RALINK_RT6855) || \
++ defined(CONFIG_RALINK_RT6855A) || defined (CONFIG_RALINK_MT7620) || \
++ defined(CONFIG_RALINK_MT7621) || defined (CONFIG_RALINK_MT7628)
++ //send signal to user application to notify link status changed
++ struct work_struct kill_sig_wq;
++#endif
++
++ struct work_struct reset_task;
++#ifdef WORKQUEUE_BH
++ struct work_struct rx_wq;
++#else
++#if defined (TASKLET_WORKQUEUE_SW)
++ struct work_struct rx_wq;
++#endif
++#endif // WORKQUEUE_BH //
++
++#if defined(CONFIG_RAETH_QOS)
++ struct sk_buff * skb_free[NUM_TX_RINGS][NUM_TX_DESC];
++ unsigned int free_idx[NUM_TX_RINGS];
++#else
++ struct sk_buff* skb_free[NUM_TX_DESC];
++ unsigned int free_idx;
++#endif
++
++ struct net_device_stats stat; /* The new statistics table. */
++ spinlock_t page_lock; /* Page register locks */
++ struct PDMA_txdesc *tx_ring0;
++#if defined(CONFIG_RAETH_QOS)
++ struct PDMA_txdesc *tx_ring1;
++ struct PDMA_txdesc *tx_ring2;
++ struct PDMA_txdesc *tx_ring3;
++#endif
++ struct PDMA_rxdesc *rx_ring0;
++ struct sk_buff *netrx0_skbuf[NUM_RX_DESC];
++#if defined (CONFIG_RAETH_MULTIPLE_RX_RING)
++ struct PDMA_rxdesc *rx_ring1;
++ struct sk_buff *netrx1_skbuf[NUM_RX_DESC];
++#endif
++#ifdef CONFIG_RAETH_NAPI
++ atomic_t irq_sem;
++#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,35)
++ struct napi_struct napi;
++#endif
++#endif
++#ifdef CONFIG_PSEUDO_SUPPORT
++ struct net_device *PseudoDev;
++ unsigned int isPseudo;
++#endif
++#if defined (CONFIG_ETHTOOL) /*&& defined (CONFIG_RAETH_ROUTER)*/
++ struct mii_if_info mii_info;
++#endif
++#ifdef CONFIG_RAETH_LRO
++ struct lro_counters lro_counters;
++ struct net_lro_mgr lro_mgr;
++ struct net_lro_desc lro_arr[8];
++#endif
++#ifdef CONFIG_RAETH_HW_VLAN_RX
++ struct vlan_group *vlgrp;
++#endif
++} END_DEVICE, *pEND_DEVICE;
++
++
++#define RAETH_VERSION "v3.0"
++
++#endif
++
++#ifdef CONFIG_RAETH_QDMA
++#define DMA_GLO_CFG QDMA_GLO_CFG
++#define GDMA1_FWD_PORT 0x5555
++#define GDMA2_FWD_PORT 0x5555
++#define RAETH_RX_CALC_IDX0 QRX_CRX_IDX_0
++#define RAETH_RX_CALC_IDX1 QRX_CRX_IDX_1
++#define RAETH_FE_INT_STATUS QFE_INT_STATUS
++#define RAETH_FE_INT_ALL QFE_INT_ALL
++#define RAETH_FE_INT_ENABLE QFE_INT_ENABLE
++#define RAETH_FE_INT_DLY_INIT QFE_INT_DLY_INIT
++#define RAETH_FE_INT_SETTING RX_DONE_INT0 | RX_DONE_INT1 | RLS_DONE_INT
++#define RAETH_TX_DLY_INT RLS_DLY_INT
++#define RAETH_TX_DONE_INT0 RLS_DONE_INT
++#define RAETH_DLY_INT_CFG QDMA_DELAY_INT
++#else
++#define DMA_GLO_CFG PDMA_GLO_CFG
++#define GDMA1_FWD_PORT 0x0000
++#define GDMA2_FWD_PORT 0x0000
++#define RAETH_RX_CALC_IDX0 RX_CALC_IDX0
++#define RAETH_RX_CALC_IDX1 RX_CALC_IDX1
++#define RAETH_FE_INT_STATUS FE_INT_STATUS
++#define RAETH_FE_INT_ALL FE_INT_ALL
++#define RAETH_FE_INT_ENABLE FE_INT_ENABLE
++#define RAETH_FE_INT_DLY_INIT FE_INT_DLY_INIT
++#define RAETH_FE_INT_SETTING RX_DONE_INT0 | RX_DONE_INT1 | TX_DONE_INT0 | TX_DONE_INT1 | TX_DONE_INT2 | TX_DONE_INT3
++#define RAETH_TX_DLY_INT TX_DLY_INT
++#define RAETH_TX_DONE_INT0 TX_DONE_INT0
++#define RAETH_DLY_INT_CFG DLY_INT_CFG
++#endif
+diff --git a/drivers/net/ethernet/raeth/ra_ioctl.h b/drivers/net/ethernet/raeth/ra_ioctl.h
+new file mode 100644
+index 0000000..eac0964
+--- /dev/null
++++ b/drivers/net/ethernet/raeth/ra_ioctl.h
+@@ -0,0 +1,92 @@
++#ifndef _RAETH_IOCTL_H
++#define _RAETH_IOCTL_H
++
++/* ioctl commands */
++#define RAETH_ESW_REG_READ 0x89F1
++#define RAETH_ESW_REG_WRITE 0x89F2
++#define RAETH_MII_READ 0x89F3
++#define RAETH_MII_WRITE 0x89F4
++#define RAETH_ESW_INGRESS_RATE 0x89F5
++#define RAETH_ESW_EGRESS_RATE 0x89F6
++#define RAETH_ESW_PHY_DUMP 0x89F7
++#define RAETH_QDMA_REG_READ 0x89F8
++#define RAETH_QDMA_REG_WRITE 0x89F9
++#define RAETH_QDMA_QUEUE_MAPPING 0x89FA
++#define RAETH_QDMA_READ_CPU_CLK 0x89FB
++
++#if defined (CONFIG_RALINK_RT6855) || defined(CONFIG_RALINK_RT6855A) || \
++ defined (CONFIG_RALINK_MT7620) || defined(CONFIG_RALINK_MT7621)
++
++#define REG_ESW_WT_MAC_MFC 0x10
++#define REG_ESW_WT_MAC_ATA1 0x74
++#define REG_ESW_WT_MAC_ATA2 0x78
++#define REG_ESW_WT_MAC_ATWD 0x7C
++#define REG_ESW_WT_MAC_ATC 0x80
++
++#define REG_ESW_TABLE_TSRA1 0x84
++#define REG_ESW_TABLE_TSRA2 0x88
++#define REG_ESW_TABLE_ATRD 0x8C
++
++
++#define REG_ESW_VLAN_VTCR 0x90
++#define REG_ESW_VLAN_VAWD1 0x94
++#define REG_ESW_VLAN_VAWD2 0x98
++
++
++#define REG_ESW_VLAN_ID_BASE 0x100
++
++//#define REG_ESW_VLAN_ID_BASE 0x50
++#define REG_ESW_VLAN_MEMB_BASE 0x70
++#define REG_ESW_TABLE_SEARCH 0x24
++#define REG_ESW_TABLE_STATUS0 0x28
++#define REG_ESW_TABLE_STATUS1 0x2C
++#define REG_ESW_TABLE_STATUS2 0x30
++#define REG_ESW_WT_MAC_AD0 0x34
++#define REG_ESW_WT_MAC_AD1 0x38
++#define REG_ESW_WT_MAC_AD2 0x3C
++
++#else
++/* rt3052 embedded ethernet switch registers */
++#define REG_ESW_VLAN_ID_BASE 0x50
++#define REG_ESW_VLAN_MEMB_BASE 0x70
++#define REG_ESW_TABLE_SEARCH 0x24
++#define REG_ESW_TABLE_STATUS0 0x28
++#define REG_ESW_TABLE_STATUS1 0x2C
++#define REG_ESW_TABLE_STATUS2 0x30
++#define REG_ESW_WT_MAC_AD0 0x34
++#define REG_ESW_WT_MAC_AD1 0x38
++#define REG_ESW_WT_MAC_AD2 0x3C
++#endif
++
++
++#if defined(CONFIG_RALINK_RT3352) || defined (CONFIG_RALINK_RT5350) || defined (CONFIG_RALINK_MT7628)
++#define REG_ESW_MAX 0x16C
++#elif defined (CONFIG_RALINK_RT6855) || defined(CONFIG_RALINK_RT6855A) || \
++ defined (CONFIG_RALINK_MT7620)
++#define REG_ESW_MAX 0x7FFFF
++#else //RT305x, RT3350
++#define REG_ESW_MAX 0xFC
++#endif
++#define REG_HQOS_MAX 0x3FFF
++
++
++typedef struct rt3052_esw_reg {
++ unsigned int off;
++ unsigned int val;
++} esw_reg;
++
++typedef struct ralink_mii_ioctl_data {
++ __u32 phy_id;
++ __u32 reg_num;
++ __u32 val_in;
++ __u32 val_out;
++} ra_mii_ioctl_data;
++
++typedef struct rt335x_esw_reg {
++ unsigned int on_off;
++ unsigned int port;
++ unsigned int bw;/*Mbps*/
++} esw_rate;
++
++
++#endif
+diff --git a/drivers/net/ethernet/raeth/ra_mac.c b/drivers/net/ethernet/raeth/ra_mac.c
+new file mode 100644
+index 0000000..8e07a06
+--- /dev/null
++++ b/drivers/net/ethernet/raeth/ra_mac.c
+@@ -0,0 +1,98 @@
++#include <linux/module.h>
++#include <linux/version.h>
++#include <linux/kernel.h>
++#include <linux/sched.h>
++#include <linux/types.h>
++#include <linux/fcntl.h>
++#include <linux/interrupt.h>
++#include <linux/ptrace.h>
++#include <linux/ioport.h>
++#include <linux/in.h>
++#include <linux/slab.h>
++#include <linux/string.h>
++#include <linux/signal.h>
++#include <linux/irq.h>
++#include <linux/ctype.h>
++
++#include <asm/io.h>
++#include <asm/bitops.h>
++#include <asm/io.h>
++#include <asm/dma.h>
++
++#include <asm/rt2880/surfboardint.h> /* for cp0 reg access, added by bobtseng */
++
++#include <linux/errno.h>
++#include <linux/init.h>
++//#include <linux/mca.h>
++
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/skbuff.h>
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/proc_fs.h>
++#include <asm/uaccess.h>
++
++#if defined(CONFIG_USER_SNMPD)
++#include <linux/seq_file.h>
++#endif
++
++
++
++#include "ra2882ethreg.h"
++#include "raether.h"
++#include "ra_mac.h"
++
++extern struct net_device *dev_raether;
++
++
++void ra2880stop(END_DEVICE *ei_local)
++{
++ unsigned int regValue;
++ printk("ra2880stop()...");
++
++ regValue = sysRegRead(PDMA_GLO_CFG);
++ regValue &= ~(TX_WB_DDONE | RX_DMA_EN | TX_DMA_EN);
++ sysRegWrite(PDMA_GLO_CFG, regValue);
++ printk("-> %s 0x%08x 0x%08x\n", "PDMA_GLO_CFG", PDMA_GLO_CFG, regValue);
++ printk("Done\n");
++}
++
++void ei_irq_clear(void)
++{
++ sysRegWrite(FE_INT_STATUS, 0xFFFFFFFF);
++ printk("-> %s 0x%08x 0x%08x\n", "FE_INT_STATUS", FE_INT_STATUS, 0xFFFFFFFF);
++}
++
++void rt2880_gmac_hard_reset(void)
++{
++ sysRegWrite(RSTCTRL, RALINK_FE_RST);
++ printk("-> %s 0x%08x 0x%08x\n", "RSTCTRL", RSTCTRL, RALINK_FE_RST);
++ sysRegWrite(RSTCTRL, 0);
++ printk("-> %s 0x%08x 0x%08x\n", "RSTCTRL", RSTCTRL, 0);
++}
++
++void ra2880EnableInterrupt()
++{
++ unsigned int regValue = sysRegRead(FE_INT_ENABLE);
++ sysRegWrite(FE_INT_ENABLE, regValue);
++ printk("-> %s 0x%08x 0x%08x\n", "FE_INT_ENABLE", FE_INT_ENABLE, regValue);
++}
++
++void ra2880MacAddressSet(unsigned char p[6])
++{
++ unsigned long regValue;
++
++ regValue = (p[0] << 8) | (p[1]);
++ sysRegWrite(GDMA1_MAC_ADRH, regValue);
++ printk("-> %s 0x%08x 0x%08x\n", "GDMA1_MAC_ADRH", GDMA1_MAC_ADRH, regValue);
++
++ regValue = (p[2] << 24) | (p[3] <<16) | (p[4] << 8) | p[5];
++ printk("-> %s 0x%08x 0x%08x\n", "GDMA1_MAC_ADRL", GDMA1_MAC_ADRL, regValue);
++ sysRegWrite(GDMA1_MAC_ADRL, regValue);
++
++ return;
++}
++
++
+diff --git a/drivers/net/ethernet/raeth/ra_mac.h b/drivers/net/ethernet/raeth/ra_mac.h
+new file mode 100644
+index 0000000..4f4e6ae
+--- /dev/null
++++ b/drivers/net/ethernet/raeth/ra_mac.h
+@@ -0,0 +1,35 @@
++#ifndef RA_MAC_H
++#define RA_MAC_H
++
++void ra2880stop(END_DEVICE *ei_local);
++void ra2880MacAddressSet(unsigned char p[6]);
++void ra2880Mac2AddressSet(unsigned char p[6]);
++void ethtool_init(struct net_device *dev);
++
++void ra2880EnableInterrupt(void);
++
++void dump_qos(void);
++void dump_reg(void);
++void dump_cp0(void);
++
++int debug_proc_init(void);
++void debug_proc_exit(void);
++
++#if defined (CONFIG_RALINK_RT6855) || defined(CONFIG_RALINK_RT6855A) || \
++ defined (CONFIG_RALINK_MT7620) || defined(CONFIG_RALINK_MT7621)
++void enable_auto_negotiate(int unused);
++#else
++void enable_auto_negotiate(int ge);
++#endif
++
++void rt2880_gmac_hard_reset(void);
++
++int TsoLenUpdate(int tso_len);
++int NumOfTxdUpdate(int num_of_txd);
++
++#ifdef CONFIG_RAETH_LRO
++int LroStatsUpdate(struct net_lro_mgr *lro_mgr, bool all_flushed);
++#endif
++int getnext(const char *src, int separator, char *dest);
++int str_to_ip(unsigned int *ip, const char *str);
++#endif
+diff --git a/drivers/net/ethernet/raeth/raether.c b/drivers/net/ethernet/raeth/raether.c
+new file mode 100644
+index 0000000..b6cbc40
+--- /dev/null
++++ b/drivers/net/ethernet/raeth/raether.c
+@@ -0,0 +1,693 @@
++#include <linux/module.h>
++#include <linux/version.h>
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/pci.h>
++#include <linux/interrupt.h>
++#include <linux/init.h>
++#include <linux/skbuff.h>
++#include <linux/if_vlan.h>
++#include <linux/if_ether.h>
++#include <linux/fs.h>
++#include <asm/uaccess.h>
++#include <linux/delay.h>
++#include <linux/sched.h>
++
++#include <asm/rt2880/rt_mmap.h>
++#include "ra2882ethreg.h"
++#include "raether.h"
++#include "ra_mac.h"
++#include "ra_ioctl.h"
++
++static int rt2880_eth_recv(struct net_device* dev);
++int reg_dbg = 0;
++
++void setup_internal_gsw(void);
++
++#define MAX_RX_LENGTH 1536
++
++struct net_device *dev_raether;
++
++static int rx_dma_owner_idx;
++static int rx_dma_owner_idx0;
++static int pending_recv;
++static struct PDMA_rxdesc *rx_ring;
++static unsigned long tx_ring_full=0;
++
++#define KSEG1 0xa0000000
++#define PHYS_TO_VIRT(x) ((void *)((x) | KSEG1))
++#define VIRT_TO_PHYS(x) ((unsigned long)(x) & ~KSEG1)
++
++extern int fe_dma_init(struct net_device *dev);
++extern int ei_start_xmit(struct sk_buff* skb, struct net_device *dev, int gmac_no);
++extern void ei_xmit_housekeeping(unsigned long unused);
++extern inline int rt2880_eth_send(struct net_device* dev, struct sk_buff *skb, int gmac_no);
++
++static int ei_set_mac_addr(struct net_device *dev, void *p)
++{
++ struct sockaddr *addr = p;
++
++ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
++
++ if(netif_running(dev))
++ return -EBUSY;
++
++ ra2880MacAddressSet(addr->sa_data);
++ return 0;
++}
++
++
++void set_fe_dma_glo_cfg(void)
++{
++ int dma_glo_cfg=0;
++
++ dma_glo_cfg = (TX_WB_DDONE | RX_DMA_EN | TX_DMA_EN | PDMA_BT_SIZE_16DWORDS);
++
++ dma_glo_cfg |= (RX_2B_OFFSET);
++
++ sysRegWrite(DMA_GLO_CFG, dma_glo_cfg);
++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "DMA_GLO_CFG", DMA_GLO_CFG, dma_glo_cfg);
++}
++
++int forward_config(struct net_device *dev)
++{
++ unsigned int regVal, regCsg;
++
++ regVal = sysRegRead(GDMA1_FWD_CFG);
++ regCsg = sysRegRead(CDMA_CSG_CFG);
++
++ //set unicast/multicast/broadcast frame to cpu
++ regVal &= ~0xFFFF;
++ regVal |= GDMA1_FWD_PORT;
++ regCsg &= ~0x7;
++
++ //disable ipv4 header checksum check
++ regVal &= ~GDM1_ICS_EN;
++ regCsg &= ~ICS_GEN_EN;
++
++ //disable tcp checksum check
++ regVal &= ~GDM1_TCS_EN;
++ regCsg &= ~TCS_GEN_EN;
++
++ //disable udp checksum check
++ regVal &= ~GDM1_UCS_EN;
++ regCsg &= ~UCS_GEN_EN;
++
++
++ dev->features &= ~NETIF_F_IP_CSUM; /* disable checksum TCP/UDP over IPv4 */
++
++
++ sysRegWrite(GDMA1_FWD_CFG, regVal);
++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "GDMA1_FWD_CFG", GDMA1_FWD_CFG, regVal);
++ sysRegWrite(CDMA_CSG_CFG, regCsg);
++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "CDMA_CSG_CFG", CDMA_CSG_CFG, regCsg);
++
++ regVal = 0x1;
++ sysRegWrite(FE_RST_GL, regVal);
++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "FE_RST_GL", FE_RST_GL, regVal);
++ sysRegWrite(FE_RST_GL, 0); // update for RSTCTL issue
++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "FE_RST_GL", FE_RST_GL, 1);
++
++ regCsg = sysRegRead(CDMA_CSG_CFG);
++ printk("CDMA_CSG_CFG = %0X\n",regCsg);
++ regVal = sysRegRead(GDMA1_FWD_CFG);
++ printk("GDMA1_FWD_CFG = %0X\n",regVal);
++
++ return 1;
++}
++
++
++static int rt2880_eth_recv(struct net_device* dev)
++{
++ struct sk_buff *skb, *rx_skb;
++ unsigned int length = 0;
++ unsigned long RxProcessed;
++
++
++ int bReschedule = 0;
++ END_DEVICE* ei_local = netdev_priv(dev);
++
++
++
++ RxProcessed = 0;
++
++ rx_dma_owner_idx0 = (sysRegRead(RAETH_RX_CALC_IDX0) + 1) % NUM_RX_DESC;
++
++ for ( ; ; ) {
++
++ if (RxProcessed++ > NUM_RX_MAX_PROCESS)
++ {
++ // need to reschedule rx handle
++ bReschedule = 1;
++ break;
++ }
++
++
++
++ if (ei_local->rx_ring0[rx_dma_owner_idx0].rxd_info2.DDONE_bit == 1) {
++ rx_ring = ei_local->rx_ring0;
++ rx_dma_owner_idx = rx_dma_owner_idx0;
++ } else {
++ break;
++ }
++
++ /* skb processing */
++ length = rx_ring[rx_dma_owner_idx].rxd_info2.PLEN0;
++ rx_skb = ei_local->netrx0_skbuf[rx_dma_owner_idx];
++ rx_skb->data = ei_local->netrx0_skbuf[rx_dma_owner_idx]->data;
++ rx_skb->len = length;
++
++ rx_skb->data += NET_IP_ALIGN;
++
++ rx_skb->tail = rx_skb->data + length;
++
++ rx_skb->dev = dev;
++ rx_skb->protocol = eth_type_trans(rx_skb,dev);
++
++ rx_skb->ip_summed = CHECKSUM_NONE;
++
++
++ /* We have to check the free memory size is big enough
++ * before pass the packet to cpu*/
++ skb = __dev_alloc_skb(MAX_RX_LENGTH + NET_IP_ALIGN, GFP_ATOMIC);
++
++ if (unlikely(skb == NULL))
++ {
++ printk(KERN_ERR "skb not available...\n");
++ ei_local->stat.rx_dropped++;
++ bReschedule = 1;
++ break;
++ }
++
++ {
++ netif_rx(rx_skb);
++ }
++
++ {
++ ei_local->stat.rx_packets++;
++ ei_local->stat.rx_bytes += length;
++ }
++
++
++ rx_ring[rx_dma_owner_idx].rxd_info2.PLEN0 = MAX_RX_LENGTH;
++ rx_ring[rx_dma_owner_idx].rxd_info2.LS0 = 0;
++ rx_ring[rx_dma_owner_idx].rxd_info2.DDONE_bit = 0;
++ rx_ring[rx_dma_owner_idx].rxd_info1.PDP0 = dma_map_single(NULL, skb->data, MAX_RX_LENGTH, PCI_DMA_FROMDEVICE);
++
++ /* Move point to next RXD which wants to alloc*/
++ sysRegWrite(RAETH_RX_CALC_IDX0, rx_dma_owner_idx);
++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RAETH_RX_CALC_IDX0", RAETH_RX_CALC_IDX0, rx_dma_owner_idx);
++ ei_local->netrx0_skbuf[rx_dma_owner_idx] = skb;
++
++ /* Update to Next packet point that was received.
++ */
++ rx_dma_owner_idx0 = (sysRegRead(RAETH_RX_CALC_IDX0) + 1) % NUM_RX_DESC;
++ } /* for */
++
++ return bReschedule;
++}
++
++void ei_receive_workq(struct work_struct *work)
++{
++ struct net_device *dev = dev_raether;
++ END_DEVICE *ei_local = netdev_priv(dev);
++ unsigned long reg_int_mask=0;
++ int bReschedule=0;
++
++
++ if(tx_ring_full==0){
++ bReschedule = rt2880_eth_recv(dev);
++ if(bReschedule)
++ {
++ schedule_work(&ei_local->rx_wq);
++ }else{
++ reg_int_mask=sysRegRead(RAETH_FE_INT_ENABLE);
++ sysRegWrite(RAETH_FE_INT_ENABLE, reg_int_mask| RX_DLY_INT);
++ if (reg_dbg) printk("-> %s 0x%08x 0x%08lx\n", "RAETH_FE_INT_ENABLE", RAETH_FE_INT_ENABLE, reg_int_mask| RX_DLY_INT);
++ }
++ }else{
++ schedule_work(&ei_local->rx_wq);
++ }
++}
++
++
++static irqreturn_t ei_interrupt(int irq, void *dev_id)
++{
++ unsigned long reg_int_val;
++ unsigned long reg_int_mask=0;
++ unsigned int recv = 0;
++ unsigned int transmit __maybe_unused = 0;
++ unsigned long flags;
++
++ struct net_device *dev = (struct net_device *) dev_id;
++ END_DEVICE *ei_local = netdev_priv(dev);
++
++ if (dev == NULL)
++ {
++ printk (KERN_ERR "net_interrupt(): irq %x for unknown device.\n", IRQ_ENET0);
++ return IRQ_NONE;
++ }
++
++
++ spin_lock_irqsave(&(ei_local->page_lock), flags);
++ reg_int_val = sysRegRead(RAETH_FE_INT_STATUS);
++
++ if((reg_int_val & RX_DLY_INT))
++ recv = 1;
++
++ if (reg_int_val & RAETH_TX_DLY_INT)
++ transmit = 1;
++
++ sysRegWrite(RAETH_FE_INT_STATUS, RAETH_FE_INT_DLY_INIT);
++ if (reg_dbg) printk("-> %s 0x%08x 0x%08lx\n", "RAETH_FE_INT_STATUS", RAETH_FE_INT_STATUS, RAETH_FE_INT_DLY_INIT);
++
++ ei_xmit_housekeeping(0);
++
++ if (((recv == 1) || (pending_recv ==1)) && (tx_ring_full==0))
++ {
++ reg_int_mask = sysRegRead(RAETH_FE_INT_ENABLE);
++ sysRegWrite(RAETH_FE_INT_ENABLE, reg_int_mask & ~(RX_DLY_INT));
++ if (reg_dbg) printk("-> %s 0x%08x 0x%08lx\n", "RAETH_FE_INT_ENABLE", RAETH_FE_INT_ENABLE, reg_int_mask & ~(RX_DLY_INT));
++ pending_recv=0;
++ schedule_work(&ei_local->rx_wq);
++ }
++ else if (recv == 1 && tx_ring_full==1)
++ {
++ pending_recv=1;
++ }
++ spin_unlock_irqrestore(&(ei_local->page_lock), flags);
++
++ return IRQ_HANDLED;
++}
++
++static void esw_link_status_changed(int port_no, void *dev_id)
++{
++ unsigned int reg_val;
++ mii_mgr_read(31, (0x3008 + (port_no*0x100)), ®_val);
++ if(reg_val & 0x1) {
++ printk("ESW: Link Status Changed - Port%d Link UP\n", port_no);
++ } else {
++ printk("ESW: Link Status Changed - Port%d Link Down\n", port_no);
++ }
++}
++
++
++static irqreturn_t esw_interrupt(int irq, void *dev_id)
++{
++ unsigned long flags;
++ unsigned int reg_int_val;
++ struct net_device *dev = (struct net_device *) dev_id;
++ END_DEVICE *ei_local = netdev_priv(dev);
++
++ spin_lock_irqsave(&(ei_local->page_lock), flags);
++ mii_mgr_read(31, 0x700c, ®_int_val);
++
++ if (reg_int_val & P4_LINK_CH) {
++ esw_link_status_changed(4, dev_id);
++ }
++
++ if (reg_int_val & P3_LINK_CH) {
++ esw_link_status_changed(3, dev_id);
++ }
++ if (reg_int_val & P2_LINK_CH) {
++ esw_link_status_changed(2, dev_id);
++ }
++ if (reg_int_val & P1_LINK_CH) {
++ esw_link_status_changed(1, dev_id);
++ }
++ if (reg_int_val & P0_LINK_CH) {
++ esw_link_status_changed(0, dev_id);
++ }
++
++ mii_mgr_write(31, 0x700c, 0x1f); //ack switch link change
++ spin_unlock_irqrestore(&(ei_local->page_lock), flags);
++ return IRQ_HANDLED;
++}
++
++
++
++static int ei_start_xmit_fake(struct sk_buff* skb, struct net_device *dev)
++{
++ return ei_start_xmit(skb, dev, 1);
++}
++
++static int ei_change_mtu(struct net_device *dev, int new_mtu)
++{
++ unsigned long flags;
++ END_DEVICE *ei_local = netdev_priv(dev); // get priv ei_local pointer from net_dev structure
++
++ if ( ei_local == NULL ) {
++ printk(KERN_EMERG "%s: ei_change_mtu passed a non-existent private pointer from net_dev!\n", dev->name);
++ return -ENXIO;
++ }
++
++ spin_lock_irqsave(&ei_local->page_lock, flags);
++
++ if ( (new_mtu > 4096) || (new_mtu < 64)) {
++ spin_unlock_irqrestore(&ei_local->page_lock, flags);
++ return -EINVAL;
++ }
++
++ if ( new_mtu > 1500 ) {
++ spin_unlock_irqrestore(&ei_local->page_lock, flags);
++ return -EINVAL;
++ }
++
++ dev->mtu = new_mtu;
++
++ spin_unlock_irqrestore(&ei_local->page_lock, flags);
++ return 0;
++}
++
++
++static const struct net_device_ops ei_netdev_ops = {
++ .ndo_init = rather_probe,
++ .ndo_open = ei_open,
++ .ndo_stop = ei_close,
++ .ndo_start_xmit = ei_start_xmit_fake,
++ .ndo_set_mac_address = eth_mac_addr,
++ .ndo_change_mtu = ei_change_mtu,
++ .ndo_validate_addr = eth_validate_addr,
++};
++
++void ra2880_setup_dev_fptable(struct net_device *dev)
++{
++ RAETH_PRINT(__FUNCTION__ "is called!\n");
++
++ dev->netdev_ops = &ei_netdev_ops;
++#define TX_TIMEOUT (5*HZ)
++ dev->watchdog_timeo = TX_TIMEOUT;
++
++}
++
++void fe_reset(void)
++{
++ u32 val;
++ val = sysRegRead(RSTCTRL);
++
++ val = val | RALINK_FE_RST;
++ sysRegWrite(RSTCTRL, val);
++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RSTCTRL", RSTCTRL, val);
++ val = val & ~(RALINK_FE_RST);
++ sysRegWrite(RSTCTRL, val);
++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RSTCTRL", RSTCTRL, val);
++}
++
++void ei_reset_task(struct work_struct *work)
++{
++ struct net_device *dev = dev_raether;
++
++ ei_close(dev);
++ ei_open(dev);
++
++ return;
++}
++
++void ei_tx_timeout(struct net_device *dev)
++{
++ END_DEVICE *ei_local = netdev_priv(dev);
++
++ schedule_work(&ei_local->reset_task);
++}
++
++int __init rather_probe(struct net_device *dev)
++{
++ END_DEVICE *ei_local = netdev_priv(dev);
++ struct sockaddr addr;
++ unsigned char mac_addr01234[5] = {0x00, 0x0C, 0x43, 0x28, 0x80};
++
++ fe_reset();
++ net_srandom(jiffies);
++ memcpy(addr.sa_data, mac_addr01234, 5);
++ addr.sa_data[5] = net_random()&0xFF;
++ ei_set_mac_addr(dev, &addr);
++ spin_lock_init(&ei_local->page_lock);
++ ether_setup(dev);
++
++ return 0;
++}
++
++
++int ei_open(struct net_device *dev)
++{
++ int i, err;
++ unsigned long flags;
++ END_DEVICE *ei_local;
++
++
++ if (!try_module_get(THIS_MODULE))
++ {
++ printk("%s: Cannot reserve module\n", __FUNCTION__);
++ return -1;
++ }
++ printk("Raeth %s (",RAETH_VERSION);
++ printk("Workqueue");
++
++ printk(")\n");
++ ei_local = netdev_priv(dev); // get device pointer from System
++ // unsigned int flags;
++
++ if (ei_local == NULL)
++ {
++ printk(KERN_EMERG "%s: ei_open passed a non-existent device!\n", dev->name);
++ return -ENXIO;
++ }
++
++ /* receiving packet buffer allocation - NUM_RX_DESC x MAX_RX_LENGTH */
++ for ( i = 0; i < NUM_RX_DESC; i++)
++ {
++ ei_local->netrx0_skbuf[i] = dev_alloc_skb(MAX_RX_LENGTH + NET_IP_ALIGN);
++ if (ei_local->netrx0_skbuf[i] == NULL ) {
++ printk("rx skbuff buffer allocation failed!");
++ } else {
++ }
++ }
++
++ spin_lock_irqsave(&(ei_local->page_lock), flags);
++ fe_dma_init(dev);
++ fe_sw_init(); //initialize fe and switch register
++ err = request_irq( dev->irq, ei_interrupt, 0, dev->name, dev); // try to fix irq in open
++ if (err)
++ return err;
++
++ if ( dev->dev_addr != NULL) {
++ ra2880MacAddressSet((void *)(dev->dev_addr));
++ } else {
++ printk("dev->dev_addr is empty !\n");
++ }
++ mii_mgr_write(31, 0x7008, 0x1f); //enable switch link change intr
++ err = request_irq(31, esw_interrupt, IRQF_DISABLED, "Ralink_ESW", dev);
++ if (err)
++ return err;
++
++ sysRegWrite(RAETH_DLY_INT_CFG, DELAY_INT_INIT);
++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RAETH_DLY_INT_CFG", RAETH_DLY_INT_CFG, DELAY_INT_INIT);
++ sysRegWrite(RAETH_FE_INT_ENABLE, RAETH_FE_INT_DLY_INIT);
++ if (reg_dbg) printk("-> %s 0x%08x 0x%08lx\n", "RAETH_FE_INT_ENABLE", RAETH_FE_INT_ENABLE, RAETH_FE_INT_DLY_INIT);
++
++ INIT_WORK(&ei_local->reset_task, ei_reset_task);
++
++ INIT_WORK(&ei_local->rx_wq, ei_receive_workq);
++
++ netif_start_queue(dev);
++
++
++ spin_unlock_irqrestore(&(ei_local->page_lock), flags);
++
++
++ forward_config(dev);
++ return 0;
++}
++
++int ei_close(struct net_device *dev)
++{
++ int i;
++ END_DEVICE *ei_local = netdev_priv(dev); // device pointer
++ unsigned long flags;
++ spin_lock_irqsave(&(ei_local->page_lock), flags);
++
++ cancel_work_sync(&ei_local->reset_task);
++ netif_stop_queue(dev);
++ ra2880stop(ei_local);
++ msleep(10);
++
++ cancel_work_sync(&ei_local->rx_wq);
++ free_irq(dev->irq, dev);
++ free_irq(31, dev);
++ for ( i = 0; i < NUM_RX_DESC; i++)
++ {
++ if (ei_local->netrx0_skbuf[i] != NULL) {
++ dev_kfree_skb(ei_local->netrx0_skbuf[i]);
++ ei_local->netrx0_skbuf[i] = NULL;
++ }
++ }
++ if (ei_local->tx_ring0 != NULL) {
++ pci_free_consistent(NULL, NUM_TX_DESC*sizeof(struct PDMA_txdesc), ei_local->tx_ring0, ei_local->phy_tx_ring0);
++ }
++ pci_free_consistent(NULL, NUM_RX_DESC*sizeof(struct PDMA_rxdesc), ei_local->rx_ring0, ei_local->phy_rx_ring0);
++
++ printk("Free TX/RX Ring Memory!\n");
++
++// fe_reset();
++ spin_unlock_irqrestore(&(ei_local->page_lock), flags);
++
++ module_put(THIS_MODULE);
++ return 0;
++}
++
++
++void setup_internal_gsw(void)
++{
++ u32 i;
++ u32 regValue;
++
++ /* reduce RGMII2 PAD driving strength */
++ *(volatile u_long *)(PAD_RGMII2_MDIO_CFG) &= ~(0x3 << 4);
++
++ //RGMII1=Normal mode
++ *(volatile u_long *)(RALINK_SYSCTL_BASE + 0x60) &= ~(0x1 << 14);
++
++ //GMAC1= RGMII mode
++ *(volatile u_long *)(SYSCFG1) &= ~(0x3 << 12);
++
++ //enable MDIO to control MT7530
++ regValue = le32_to_cpu(*(volatile u_long *)(RALINK_SYSCTL_BASE + 0x60));
++ regValue &= ~(0x3 << 12);
++ *(volatile u_long *)(RALINK_SYSCTL_BASE + 0x60) = regValue;
++
++ for(i=0;i<=4;i++)
++ {
++ //turn off PHY
++ mii_mgr_read(i, 0x0 ,®Value);
++ regValue |= (0x1<<11);
++ mii_mgr_write(i, 0x0, regValue);
++ }
++ mii_mgr_write(31, 0x7000, 0x3); //reset switch
++ udelay(10);
++
++ if(sysRegRead(0xbe00000c)==0x00030101) {
++ sysRegWrite(RALINK_ETH_SW_BASE+0x100, 0x2005e30b);//(GE1, Force 1000M/FD, FC ON)
++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RALINK_ETH_SW_BASE+0x100", RALINK_ETH_SW_BASE+0x100, 0x2005e30b);
++ mii_mgr_write(31, 0x3600, 0x5e30b);
++ } else {
++ sysRegWrite(RALINK_ETH_SW_BASE+0x100, 0x2005e33b);//(GE1, Force 1000M/FD, FC ON)
++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RALINK_ETH_SW_BASE+0x100", RALINK_ETH_SW_BASE+0x100, 0x2005e33b);
++ mii_mgr_write(31, 0x3600, 0x5e33b);
++ }
++
++ sysRegWrite(RALINK_ETH_SW_BASE+0x200, 0x00008000);//(GE2, Link down)
++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RALINK_ETH_SW_BASE+0x200", RALINK_ETH_SW_BASE+0x200, 0x00008000);
++
++ //regValue = 0x117ccf; //Enable Port 6, P5 as GMAC5, P5 disable*/
++ mii_mgr_read(31, 0x7804 ,®Value);
++ regValue &= ~(1<<8); //Enable Port 6
++ regValue |= (1<<6); //Disable Port 5
++ regValue |= (1<<13); //Port 5 as GMAC, no Internal PHY
++
++ regValue |= (1<<16);//change HW-TRAP
++ printk("change HW-TRAP to 0x%x!!!!!!!!!!!!",regValue);
++ mii_mgr_write(31, 0x7804 ,regValue);
++ regValue = *(volatile u_long *)(RALINK_SYSCTL_BASE + 0x10);
++ regValue = (regValue >> 6) & 0x7;
++ if(regValue >= 6) { //25Mhz Xtal
++ /* do nothing */
++ } else if(regValue >=3) { //40Mhz
++
++ mii_mgr_write(0, 13, 0x1f); // disable MT7530 core clock
++ mii_mgr_write(0, 14, 0x410);
++ mii_mgr_write(0, 13, 0x401f);
++ mii_mgr_write(0, 14, 0x0);
++
++ mii_mgr_write(0, 13, 0x1f); // disable MT7530 PLL
++ mii_mgr_write(0, 14, 0x40d);
++ mii_mgr_write(0, 13, 0x401f);
++ mii_mgr_write(0, 14, 0x2020);
++
++ mii_mgr_write(0, 13, 0x1f); // for MT7530 core clock = 500Mhz
++ mii_mgr_write(0, 14, 0x40e);
++ mii_mgr_write(0, 13, 0x401f);
++ mii_mgr_write(0, 14, 0x119);
++
++ mii_mgr_write(0, 13, 0x1f); // enable MT7530 PLL
++ mii_mgr_write(0, 14, 0x40d);
++ mii_mgr_write(0, 13, 0x401f);
++ mii_mgr_write(0, 14, 0x2820);
++
++ udelay(20); //suggest by CD
++
++ mii_mgr_write(0, 13, 0x1f); // enable MT7530 core clock
++ mii_mgr_write(0, 14, 0x410);
++ mii_mgr_write(0, 13, 0x401f);
++ }else { //20Mhz Xtal
++
++ /* TODO */
++
++ }
++ mii_mgr_write(0, 14, 0x1); /*RGMII*/
++
++#if 1
++ mii_mgr_write(31, 0x7b00, 0x102); //delay setting for 10/1000M
++ mii_mgr_write(31, 0x7b04, 0x14); //delay setting for 10/1000M
++#else
++ mii_mgr_write(31, 0x7b00, 8); // delay setting for 100M
++ mii_mgr_write(31, 0x7b04, 0x14); // for 100M
++#endif
++ /*Tx Driving*/
++ mii_mgr_write(31, 0x7a54, 0x44); //lower driving
++ mii_mgr_write(31, 0x7a5c, 0x44); //lower driving
++ mii_mgr_write(31, 0x7a64, 0x44); //lower driving
++ mii_mgr_write(31, 0x7a6c, 0x44); //lower driving
++ mii_mgr_write(31, 0x7a74, 0x44); //lower driving
++ mii_mgr_write(31, 0x7a7c, 0x44); //lower driving
++
++ for(i=0;i<=4;i++)
++ {
++ //turn on PHY
++ mii_mgr_read(i, 0x0 ,®Value);
++ regValue &= ~(0x1<<11);
++ mii_mgr_write(i, 0x0, regValue);
++ }
++
++ mii_mgr_read(31, 0x7808 ,®Value);
++ regValue |= (3<<16); //Enable INTR
++ mii_mgr_write(31, 0x7808 ,regValue);
++}
++
++int __init ra2882eth_init(void)
++{
++ int ret;
++ struct net_device *dev = alloc_etherdev(sizeof(END_DEVICE));
++ if (!dev)
++ return -ENOMEM;
++
++ strcpy(dev->name, DEV_NAME);
++ dev->irq = IRQ_ENET0;
++ dev->addr_len = 6;
++ dev->base_addr = RALINK_FRAME_ENGINE_BASE;
++
++ rather_probe(dev);
++ ra2880_setup_dev_fptable(dev);
++
++ if ( register_netdev(dev) != 0) {
++ printk(KERN_WARNING " " __FILE__ ": No ethernet port found.\n");
++ return -ENXIO;
++ }
++ ret = 0;
++
++ dev_raether = dev;
++ return ret;
++}
++
++void fe_sw_init(void)
++{
++ setup_internal_gsw();
++}
++
++
++void ra2882eth_cleanup_module(void)
++{
++}
++EXPORT_SYMBOL(set_fe_dma_glo_cfg);
++module_init(ra2882eth_init);
++module_exit(ra2882eth_cleanup_module);
++MODULE_LICENSE("GPL");
+diff --git a/drivers/net/ethernet/raeth/raether.h b/drivers/net/ethernet/raeth/raether.h
+new file mode 100644
+index 0000000..49326d1
+--- /dev/null
++++ b/drivers/net/ethernet/raeth/raether.h
+@@ -0,0 +1,92 @@
++#ifndef RA2882ETHEND_H
++#define RA2882ETHEND_H
++
++#ifdef DSP_VIA_NONCACHEABLE
++#define ESRAM_BASE 0xa0800000 /* 0x0080-0000 ~ 0x00807FFF */
++#else
++#define ESRAM_BASE 0x80800000 /* 0x0080-0000 ~ 0x00807FFF */
++#endif
++
++#define RX_RING_BASE ((int)(ESRAM_BASE + 0x7000))
++#define TX_RING_BASE ((int)(ESRAM_BASE + 0x7800))
++
++#if defined(CONFIG_RALINK_RT2880)
++#define NUM_TX_RINGS 1
++#else
++#define NUM_TX_RINGS 4
++#endif
++#ifdef MEMORY_OPTIMIZATION
++#ifdef CONFIG_RAETH_ROUTER
++#define NUM_RX_DESC 128
++#define NUM_TX_DESC 128
++#elif CONFIG_RT_3052_ESW
++#define NUM_RX_DESC 64
++#define NUM_TX_DESC 64
++#else
++#define NUM_RX_DESC 128
++#define NUM_TX_DESC 128
++#endif
++//#define NUM_RX_MAX_PROCESS 32
++#define NUM_RX_MAX_PROCESS 64
++#else
++#if defined (CONFIG_RAETH_ROUTER)
++#define NUM_RX_DESC 256
++#define NUM_TX_DESC 256
++#elif defined (CONFIG_RT_3052_ESW)
++#define NUM_RX_DESC 256
++#define NUM_TX_DESC 256
++#else
++#define NUM_RX_DESC 256
++#define NUM_TX_DESC 256
++#endif
++#if defined(CONFIG_RALINK_RT3883) || defined(CONFIG_RALINK_MT7620)
++#define NUM_RX_MAX_PROCESS 2
++#else
++#define NUM_RX_MAX_PROCESS 16
++#endif
++#endif
++
++#define DEV_NAME "eth0"
++#define DEV2_NAME "eth3"
++
++#if defined (CONFIG_RALINK_RT6855A) || defined (CONFIG_RALINK_MT7621)
++#define GMAC0_OFFSET 0xE000
++#define GMAC2_OFFSET 0xE006
++#else
++#define GMAC0_OFFSET 0x28
++#define GMAC2_OFFSET 0x22
++#endif
++
++#if defined(CONFIG_RALINK_RT6855A)
++#define IRQ_ENET0 22
++#else
++#define IRQ_ENET0 11 /* hardware interrupt #3, defined in RT2880 Soc Design Spec Rev 0.03, pp43 */
++#endif
++
++#define FE_INT_STATUS_REG (*(volatile unsigned long *)(FE_INT_STATUS))
++#define FE_INT_STATUS_CLEAN(reg) (*(volatile unsigned long *)(FE_INT_STATUS)) = reg
++
++//#define RAETH_DEBUG
++#ifdef RAETH_DEBUG
++#define RAETH_PRINT(fmt, args...) printk(KERN_INFO fmt, ## args)
++#else
++#define RAETH_PRINT(fmt, args...) { }
++#endif
++
++struct net_device_stats *ra_get_stats(struct net_device *dev);
++
++void ei_tx_timeout(struct net_device *dev);
++int rather_probe(struct net_device *dev);
++int ei_open(struct net_device *dev);
++int ei_close(struct net_device *dev);
++
++int ra2882eth_init(void);
++void ra2882eth_cleanup_module(void);
++
++void ei_xmit_housekeeping(unsigned long data);
++
++u32 mii_mgr_read(u32 phy_addr, u32 phy_register, u32 *read_data);
++u32 mii_mgr_write(u32 phy_addr, u32 phy_register, u32 write_data);
++void fe_sw_init(void);
++
++#endif
+diff --git a/drivers/net/ethernet/raeth/raether_pdma.c b/drivers/net/ethernet/raeth/raether_pdma.c
+new file mode 100644
+index 0000000..4f1b154
+--- /dev/null
++++ b/drivers/net/ethernet/raeth/raether_pdma.c
+@@ -0,0 +1,212 @@
++#include <linux/module.h>
++#include <linux/version.h>
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/skbuff.h>
++#include <linux/if_vlan.h>
++#include <linux/if_ether.h>
++#include <linux/fs.h>
++#include <asm/uaccess.h>
++#include <linux/delay.h>
++#include <linux/sched.h>
++#include <asm/rt2880/rt_mmap.h>
++#include "ra2882ethreg.h"
++#include "raether.h"
++#include "ra_mac.h"
++
++#define MAX_RX_LENGTH 1536
++
++extern int reg_dbg;
++extern struct net_device *dev_raether;
++static unsigned long tx_ring_full=0;
++
++#define KSEG1 0xa0000000
++#define PHYS_TO_VIRT(x) ((void *)((x) | KSEG1))
++#define VIRT_TO_PHYS(x) ((unsigned long)(x) & ~KSEG1)
++
++extern void set_fe_dma_glo_cfg(void);
++
++int fe_dma_init(struct net_device *dev)
++{
++
++ int i;
++ unsigned int regVal;
++ END_DEVICE* ei_local = netdev_priv(dev);
++
++ while(1)
++ {
++ regVal = sysRegRead(PDMA_GLO_CFG);
++ if((regVal & RX_DMA_BUSY))
++ {
++ printk("\n RX_DMA_BUSY !!! ");
++ continue;
++ }
++ if((regVal & TX_DMA_BUSY))
++ {
++ printk("\n TX_DMA_BUSY !!! ");
++ continue;
++ }
++ break;
++ }
++
++ for (i=0;i<NUM_TX_DESC;i++){
++ ei_local->skb_free[i]=0;
++ }
++ ei_local->free_idx =0;
++ ei_local->tx_ring0 = pci_alloc_consistent(NULL, NUM_TX_DESC * sizeof(struct PDMA_txdesc), &ei_local->phy_tx_ring0);
++ printk("\nphy_tx_ring = 0x%08x, tx_ring = 0x%p\n", ei_local->phy_tx_ring0, ei_local->tx_ring0);
++
++ for (i=0; i < NUM_TX_DESC; i++) {
++ memset(&ei_local->tx_ring0[i],0,sizeof(struct PDMA_txdesc));
++ ei_local->tx_ring0[i].txd_info2.LS0_bit = 1;
++ ei_local->tx_ring0[i].txd_info2.DDONE_bit = 1;
++
++ }
++
++ /* Initial RX Ring 0*/
++ ei_local->rx_ring0 = pci_alloc_consistent(NULL, NUM_RX_DESC * sizeof(struct PDMA_rxdesc), &ei_local->phy_rx_ring0);
++ for (i = 0; i < NUM_RX_DESC; i++) {
++ memset(&ei_local->rx_ring0[i],0,sizeof(struct PDMA_rxdesc));
++ ei_local->rx_ring0[i].rxd_info2.DDONE_bit = 0;
++ ei_local->rx_ring0[i].rxd_info2.LS0 = 0;
++ ei_local->rx_ring0[i].rxd_info2.PLEN0 = MAX_RX_LENGTH;
++ ei_local->rx_ring0[i].rxd_info1.PDP0 = dma_map_single(NULL, ei_local->netrx0_skbuf[i]->data, MAX_RX_LENGTH, PCI_DMA_FROMDEVICE);
++ }
++ printk("\nphy_rx_ring0 = 0x%08x, rx_ring0 = 0x%p\n",ei_local->phy_rx_ring0,ei_local->rx_ring0);
++
++
++ regVal = sysRegRead(PDMA_GLO_CFG);
++ regVal &= 0x000000FF;
++ sysRegWrite(PDMA_GLO_CFG, regVal);
++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "PDMA_GLO_CFG", PDMA_GLO_CFG, regVal);
++
++ regVal=sysRegRead(PDMA_GLO_CFG);
++
++ /* Tell the adapter where the TX/RX rings are located. */
++ sysRegWrite(TX_BASE_PTR0, phys_to_bus((u32) ei_local->phy_tx_ring0));
++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "TX_BASE_PTR0", TX_BASE_PTR0, phys_to_bus((u32) ei_local->phy_tx_ring0));
++ sysRegWrite(TX_MAX_CNT0, cpu_to_le32((u32) NUM_TX_DESC));
++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "TX_MAX_CNT0", TX_MAX_CNT0, cpu_to_le32((u32) NUM_TX_DESC));
++ sysRegWrite(TX_CTX_IDX0, 0);
++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "TX_CTX_IDX0", TX_CTX_IDX0, 0);
++ sysRegWrite(PDMA_RST_CFG, PST_DTX_IDX0);
++ if (reg_dbg) printk("-> %s 0x%08x 0x%08lx\n", "PDMA_RST_CFG", PDMA_RST_CFG, PST_DTX_IDX0);
++
++ sysRegWrite(RX_BASE_PTR0, phys_to_bus((u32) ei_local->phy_rx_ring0));
++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RX_BASE_PTR0", RX_BASE_PTR0, phys_to_bus((u32) ei_local->phy_rx_ring0));
++ sysRegWrite(RX_MAX_CNT0, cpu_to_le32((u32) NUM_RX_DESC));
++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RX_MAX_CNT0", RX_MAX_CNT0, cpu_to_le32((u32) NUM_RX_DESC));
++ sysRegWrite(RX_CALC_IDX0, cpu_to_le32((u32) (NUM_RX_DESC - 1)));
++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RX_CALC_IDX0", RX_CALC_IDX0, cpu_to_le32((u32) (NUM_RX_DESC - 1)));
++ sysRegWrite(PDMA_RST_CFG, PST_DRX_IDX0);
++ if (reg_dbg) printk("-> %s 0x%08x 0x%08lx\n", "PDMA_RST_CFG", PDMA_RST_CFG, PST_DRX_IDX0);
++
++ set_fe_dma_glo_cfg();
++
++ return 1;
++}
++
++inline int rt2880_eth_send(struct net_device* dev, struct sk_buff *skb, int gmac_no)
++{
++ unsigned int length=skb->len;
++ END_DEVICE* ei_local = netdev_priv(dev);
++ unsigned long tx_cpu_owner_idx0 = sysRegRead(TX_CTX_IDX0);
++
++ while(ei_local->tx_ring0[tx_cpu_owner_idx0].txd_info2.DDONE_bit == 0)
++ {
++ ei_local->stat.tx_errors++;
++ }
++
++ ei_local->tx_ring0[tx_cpu_owner_idx0].txd_info1.SDP0 = virt_to_phys(skb->data);
++ ei_local->tx_ring0[tx_cpu_owner_idx0].txd_info2.SDL0 = length;
++ if (gmac_no == 1) {
++ ei_local->tx_ring0[tx_cpu_owner_idx0].txd_info4.FPORT = 1;
++ }else {
++ ei_local->tx_ring0[tx_cpu_owner_idx0].txd_info4.FPORT = 2;
++ }
++ ei_local->tx_ring0[tx_cpu_owner_idx0].txd_info2.DDONE_bit = 0;
++ tx_cpu_owner_idx0 = (tx_cpu_owner_idx0+1) % NUM_TX_DESC;
++ while(ei_local->tx_ring0[tx_cpu_owner_idx0].txd_info2.DDONE_bit == 0)
++ {
++ ei_local->stat.tx_errors++;
++ }
++ sysRegWrite(TX_CTX_IDX0, cpu_to_le32((u32)tx_cpu_owner_idx0));
++
++ {
++ ei_local->stat.tx_packets++;
++ ei_local->stat.tx_bytes += length;
++ }
++
++ return length;
++}
++
++int ei_start_xmit(struct sk_buff* skb, struct net_device *dev, int gmac_no)
++{
++ END_DEVICE *ei_local = netdev_priv(dev);
++ unsigned long flags;
++ unsigned long tx_cpu_owner_idx;
++ unsigned int tx_cpu_owner_idx_next;
++ unsigned int num_of_txd;
++ unsigned int tx_cpu_owner_idx_next2;
++
++ dev->trans_start = jiffies; /* save the timestamp */
++ spin_lock_irqsave(&ei_local->page_lock, flags);
++ dma_cache_sync(NULL, skb->data, skb->len, DMA_TO_DEVICE);
++
++ tx_cpu_owner_idx = sysRegRead(TX_CTX_IDX0);
++ num_of_txd = 1;
++ tx_cpu_owner_idx_next = (tx_cpu_owner_idx + num_of_txd) % NUM_TX_DESC;
++
++ if(((ei_local->skb_free[tx_cpu_owner_idx]) ==0) && (ei_local->skb_free[tx_cpu_owner_idx_next]==0)){
++ rt2880_eth_send(dev, skb, gmac_no);
++
++ tx_cpu_owner_idx_next2 = (tx_cpu_owner_idx_next + 1) % NUM_TX_DESC;
++
++ if(ei_local->skb_free[tx_cpu_owner_idx_next2]!=0){
++ }
++ }else {
++ ei_local->stat.tx_dropped++;
++ kfree_skb(skb);
++ spin_unlock_irqrestore(&ei_local->page_lock, flags);
++ return 0;
++ }
++
++ ei_local->skb_free[tx_cpu_owner_idx] = skb;
++ spin_unlock_irqrestore(&ei_local->page_lock, flags);
++ return 0;
++}
++
++void ei_xmit_housekeeping(unsigned long unused)
++{
++ struct net_device *dev = dev_raether;
++ END_DEVICE *ei_local = netdev_priv(dev);
++ struct PDMA_txdesc *tx_desc;
++ unsigned long skb_free_idx;
++ unsigned long tx_dtx_idx __maybe_unused;
++ unsigned long reg_int_mask=0;
++
++ tx_dtx_idx = sysRegRead(TX_DTX_IDX0);
++ tx_desc = ei_local->tx_ring0;
++ skb_free_idx = ei_local->free_idx;
++ if ((ei_local->skb_free[skb_free_idx]) != 0 && tx_desc[skb_free_idx].txd_info2.DDONE_bit==1) {
++ while(tx_desc[skb_free_idx].txd_info2.DDONE_bit==1 && (ei_local->skb_free[skb_free_idx])!=0 ){
++ dev_kfree_skb_any(ei_local->skb_free[skb_free_idx]);
++ ei_local->skb_free[skb_free_idx]=0;
++ skb_free_idx = (skb_free_idx +1) % NUM_TX_DESC;
++ }
++
++ netif_wake_queue(dev);
++ tx_ring_full=0;
++ ei_local->free_idx = skb_free_idx;
++ }
++
++ reg_int_mask=sysRegRead(FE_INT_ENABLE);
++ sysRegWrite(FE_INT_ENABLE, reg_int_mask| TX_DLY_INT);
++}
++
++EXPORT_SYMBOL(ei_start_xmit);
++EXPORT_SYMBOL(ei_xmit_housekeeping);
++EXPORT_SYMBOL(fe_dma_init);
++EXPORT_SYMBOL(rt2880_eth_send);
+diff --git a/drivers/net/ethernet/raeth/raether_qdma.c b/drivers/net/ethernet/raeth/raether_qdma.c
+new file mode 100644
+index 0000000..4ad2f42
+--- /dev/null
++++ b/drivers/net/ethernet/raeth/raether_qdma.c
+@@ -0,0 +1,805 @@
++#include <linux/module.h>
++#include <linux/version.h>
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/skbuff.h>
++#include <linux/if_vlan.h>
++#include <linux/if_ether.h>
++#include <linux/fs.h>
++#include <asm/uaccess.h>
++#include <asm/rt2880/surfboardint.h>
++#if defined (CONFIG_RAETH_TSO)
++#include <linux/tcp.h>
++#include <net/ipv6.h>
++#include <linux/ip.h>
++#include <net/ip.h>
++#include <net/tcp.h>
++#include <linux/in.h>
++#include <linux/ppp_defs.h>
++#include <linux/if_pppox.h>
++#endif
++#include <linux/delay.h>
++#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,35)
++#include <linux/sched.h>
++#endif
++
++#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,0)
++#include <asm/rt2880/rt_mmap.h>
++#else
++#include <linux/libata-compat.h>
++#endif
++
++#include "ra2882ethreg.h"
++#include "raether.h"
++#include "ra_mac.h"
++#include "ra_ioctl.h"
++#include "ra_rfrw.h"
++#ifdef CONFIG_RAETH_NETLINK
++#include "ra_netlink.h"
++#endif
++#if defined (CONFIG_RAETH_QOS)
++#include "ra_qos.h"
++#endif
++
++#if defined (CONFIG_RA_HW_NAT) || defined (CONFIG_RA_HW_NAT_MODULE)
++#include "../../../net/nat/hw_nat/ra_nat.h"
++#endif
++
++#if defined (TASKLET_WORKQUEUE_SW)
++int init_schedule;
++int working_schedule;
++#endif
++
++
++#if !defined(CONFIG_RA_NAT_NONE)
++/* bruce+
++ */
++extern int (*ra_sw_nat_hook_rx)(struct sk_buff *skb);
++extern int (*ra_sw_nat_hook_tx)(struct sk_buff *skb, int gmac_no);
++#endif
++
++#if defined(CONFIG_RA_CLASSIFIER)||defined(CONFIG_RA_CLASSIFIER_MODULE)
++/* Qwert+
++ */
++#include <asm/mipsregs.h>
++extern int (*ra_classifier_hook_tx)(struct sk_buff *skb, unsigned long cur_cycle);
++extern int (*ra_classifier_hook_rx)(struct sk_buff *skb, unsigned long cur_cycle);
++#endif /* CONFIG_RA_CLASSIFIER */
++
++#if defined (CONFIG_RALINK_RT3052_MP2)
++int32_t mcast_rx(struct sk_buff * skb);
++int32_t mcast_tx(struct sk_buff * skb);
++#endif
++
++#ifdef RA_MTD_RW_BY_NUM
++int ra_mtd_read(int num, loff_t from, size_t len, u_char *buf);
++#else
++int ra_mtd_read_nm(char *name, loff_t from, size_t len, u_char *buf);
++#endif
++
++/* gmac driver feature set config */
++#if defined (CONFIG_RAETH_NAPI) || defined (CONFIG_RAETH_QOS)
++#undef DELAY_INT
++#else
++#define DELAY_INT 1
++#endif
++
++//#define CONFIG_UNH_TEST
++/* end of config */
++
++#if defined (CONFIG_RAETH_JUMBOFRAME)
++#define MAX_RX_LENGTH 4096
++#else
++#define MAX_RX_LENGTH 1536
++#endif
++
++extern struct net_device *dev_raether;
++
++#if defined (CONFIG_RAETH_MULTIPLE_RX_RING)
++static int rx_dma_owner_idx1;
++#ifdef CONFIG_RAETH_RW_PDMAPTR_FROM_VAR
++static int rx_calc_idx1;
++#endif
++#endif
++#ifdef CONFIG_RAETH_RW_PDMAPTR_FROM_VAR
++static int rx_calc_idx0;
++static unsigned long tx_cpu_owner_idx0=0;
++#endif
++static unsigned long tx_ring_full=0;
++
++#if defined (CONFIG_ETHTOOL) && defined (CONFIG_RAETH_ROUTER)
++#include "ra_ethtool.h"
++extern struct ethtool_ops ra_ethtool_ops;
++#ifdef CONFIG_PSEUDO_SUPPORT
++extern struct ethtool_ops ra_virt_ethtool_ops;
++#endif // CONFIG_PSEUDO_SUPPORT //
++#endif // (CONFIG_ETHTOOL //
++
++#ifdef CONFIG_RALINK_VISTA_BASIC
++int is_switch_175c = 1;
++#endif
++
++//skb->mark to queue mapping table
++extern unsigned int M2Q_table[64];
++
++
++#define KSEG1 0xa0000000
++#define PHYS_TO_VIRT(x) ((void *)((x) | KSEG1))
++#define VIRT_TO_PHYS(x) ((unsigned long)(x) & ~KSEG1)
++
++extern void set_fe_dma_glo_cfg(void);
++
++
++/**
++ *
++ * @brief: get the TXD index from its address
++ *
++ * @param: cpu_ptr
++ *
++ * @return: TXD index
++*/
++
++static unsigned int GET_TXD_OFFSET(struct QDMA_txdesc **cpu_ptr)
++{
++ struct net_device *dev = dev_raether;
++ END_DEVICE *ei_local = netdev_priv(dev);
++ int ctx_offset;
++ ctx_offset = (((((u32)*cpu_ptr) <<8)>>8) - ((((u32)ei_local->txd_pool)<<8)>>8))/ sizeof(struct QDMA_txdesc);
++ ctx_offset = (*cpu_ptr - ei_local->txd_pool);
++
++ return ctx_offset;
++}
++
++
++
++/**
++ * @brief get free TXD from TXD queue
++ *
++ * @param free_txd
++ *
++ * @return
++ */
++static int get_free_txd(struct QDMA_txdesc **free_txd)
++{
++ struct net_device *dev = dev_raether;
++ END_DEVICE *ei_local = netdev_priv(dev);
++ unsigned int tmp_idx;
++
++ if(ei_local->free_txd_num > 0){
++ tmp_idx = ei_local->free_txd_head;
++ ei_local->free_txd_head = ei_local->txd_pool_info[tmp_idx];
++ ei_local->free_txd_num -= 1;
++ *free_txd = &ei_local->txd_pool[tmp_idx];
++ return tmp_idx;
++ }else
++ return NUM_TX_DESC;
++}
++
++
++/**
++ * @brief add free TXD into TXD queue
++ *
++ * @param free_txd
++ *
++ * @return
++ */
++int put_free_txd(int free_txd_idx)
++{
++ struct net_device *dev = dev_raether;
++ END_DEVICE *ei_local = netdev_priv(dev);
++ ei_local->txd_pool_info[ei_local->free_txd_tail] = free_txd_idx;
++ ei_local->free_txd_tail = free_txd_idx;
++ ei_local->txd_pool_info[free_txd_idx] = NUM_TX_DESC;
++ ei_local->free_txd_num += 1;
++ return 1;
++}
++
++/*define qdma initial alloc*/
++/**
++ * @brief
++ *
++ * @param net_dev
++ *
++ * @return 0: fail
++ * 1: success
++ */
++bool qdma_tx_desc_alloc(void)
++{
++ struct net_device *dev = dev_raether;
++ END_DEVICE *ei_local = netdev_priv(dev);
++ struct QDMA_txdesc *free_txd = NULL;
++ unsigned int txd_idx;
++ int i = 0;
++
++
++ ei_local->txd_pool = pci_alloc_consistent(NULL, sizeof(struct QDMA_txdesc) * NUM_TX_DESC, &ei_local->phy_txd_pool);
++ printk("txd_pool=%p phy_txd_pool=%08X\n", ei_local->txd_pool , ei_local->phy_txd_pool);
++
++ if (ei_local->txd_pool == NULL) {
++ printk("adapter->txd_pool allocation failed!\n");
++ return 0;
++ }
++ printk("ei_local->skb_free start address is 0x%p.\n", ei_local->skb_free);
++ //set all txd_pool_info to 0.
++ for ( i = 0; i < NUM_TX_DESC; i++)
++ {
++ ei_local->skb_free[i]= 0;
++ ei_local->txd_pool_info[i] = i + 1;
++ ei_local->txd_pool[i].txd_info3.LS_bit = 1;
++ ei_local->txd_pool[i].txd_info3.OWN_bit = 1;
++ }
++
++ ei_local->free_txd_head = 0;
++ ei_local->free_txd_tail = NUM_TX_DESC - 1;
++ ei_local->free_txd_num = NUM_TX_DESC;
++
++
++ //get free txd from txd pool
++ txd_idx = get_free_txd(&free_txd);
++ if( txd_idx == NUM_TX_DESC) {
++ printk("get_free_txd fail\n");
++ return 0;
++ }
++
++ //add null TXD for transmit
++ ei_local->tx_dma_ptr = VIRT_TO_PHYS(free_txd);
++ ei_local->tx_cpu_ptr = VIRT_TO_PHYS(free_txd);
++ sysRegWrite(QTX_CTX_PTR, ei_local->tx_cpu_ptr);
++ sysRegWrite(QTX_DTX_PTR, ei_local->tx_dma_ptr);
++
++ //get free txd from txd pool
++
++ txd_idx = get_free_txd(&free_txd);
++ if( txd_idx == NUM_TX_DESC) {
++ printk("get_free_txd fail\n");
++ return 0;
++ }
++ // add null TXD for release
++ sysRegWrite(QTX_CRX_PTR, VIRT_TO_PHYS(free_txd));
++ sysRegWrite(QTX_DRX_PTR, VIRT_TO_PHYS(free_txd));
++
++ printk("free_txd: %p, ei_local->cpu_ptr: %08X\n", free_txd, ei_local->tx_cpu_ptr);
++
++ printk(" POOL HEAD_PTR | DMA_PTR | CPU_PTR \n");
++ printk("----------------+---------+--------\n");
++#if 1
++ printk(" 0x%p 0x%08X 0x%08X\n",ei_local->txd_pool,
++ ei_local->tx_dma_ptr, ei_local->tx_cpu_ptr);
++#endif
++ return 1;
++}
++
++bool fq_qdma_init(void)
++{
++ struct QDMA_txdesc *free_head = NULL;
++ unsigned int free_head_phy;
++ unsigned int free_tail_phy;
++ unsigned int *free_page_head = NULL;
++ unsigned int free_page_head_phy;
++ int i;
++
++ free_head = pci_alloc_consistent(NULL, NUM_QDMA_PAGE * sizeof(struct QDMA_txdesc), &free_head_phy);
++ if (unlikely(free_head == NULL)){
++ printk(KERN_ERR "QDMA FQ decriptor not available...\n");
++ return 0;
++ }
++ memset(free_head, 0x0, sizeof(struct QDMA_txdesc) * NUM_QDMA_PAGE);
++
++ free_page_head = pci_alloc_consistent(NULL, NUM_QDMA_PAGE * QDMA_PAGE_SIZE, &free_page_head_phy);
++ if (unlikely(free_page_head == NULL)){
++ printk(KERN_ERR "QDMA FQ pager not available...\n");
++ return 0;
++ }
++ for (i=0; i < NUM_QDMA_PAGE; i++) {
++ free_head[i].txd_info1.SDP = (free_page_head_phy + (i * QDMA_PAGE_SIZE));
++ if(i < (NUM_QDMA_PAGE-1)){
++ free_head[i].txd_info2.NDP = (free_head_phy + ((i+1) * sizeof(struct QDMA_txdesc)));
++
++
++#if 0
++ printk("free_head_phy[%d] is 0x%x!!!\n",i, VIRT_TO_PHYS(&free_head[i]) );
++ printk("free_head[%d] is 0x%x!!!\n",i, &free_head[i] );
++ printk("free_head[%d].txd_info1.SDP is 0x%x!!!\n",i, free_head[i].txd_info1.SDP );
++ printk("free_head[%d].txd_info2.NDP is 0x%x!!!\n",i, free_head[i].txd_info2.NDP );
++#endif
++ }
++ free_head[i].txd_info3.SDL = QDMA_PAGE_SIZE;
++
++ }
++ free_tail_phy = (free_head_phy + (u32)((NUM_QDMA_PAGE-1) * sizeof(struct QDMA_txdesc)));
++
++ printk("free_head_phy is 0x%x!!!\n", free_head_phy);
++ printk("free_tail_phy is 0x%x!!!\n", free_tail_phy);
++ sysRegWrite(QDMA_FQ_HEAD, (u32)free_head_phy);
++ sysRegWrite(QDMA_FQ_TAIL, (u32)free_tail_phy);
++ sysRegWrite(QDMA_FQ_CNT, ((NUM_TX_DESC << 16) | NUM_QDMA_PAGE));
++ sysRegWrite(QDMA_FQ_BLEN, QDMA_PAGE_SIZE << 16);
++ return 1;
++}
++
++int fe_dma_init(struct net_device *dev)
++{
++
++ int i;
++ unsigned int regVal;
++ END_DEVICE* ei_local = netdev_priv(dev);
++
++ fq_qdma_init();
++
++ while(1)
++ {
++ regVal = sysRegRead(QDMA_GLO_CFG);
++ if((regVal & RX_DMA_BUSY))
++ {
++ printk("\n RX_DMA_BUSY !!! ");
++ continue;
++ }
++ if((regVal & TX_DMA_BUSY))
++ {
++ printk("\n TX_DMA_BUSY !!! ");
++ continue;
++ }
++ break;
++ }
++ /*tx desc alloc, add a NULL TXD to HW*/
++
++ qdma_tx_desc_alloc();
++
++
++ /* Initial RX Ring 0*/
++#ifdef CONFIG_32B_DESC
++ ei_local->rx_ring0 = kmalloc(NUM_RX_DESC * sizeof(struct PDMA_rxdesc), GFP_KERNEL);
++ ei_local->phy_rx_ring0 = virt_to_phys(ei_local->rx_ring0);
++#else
++ ei_local->rx_ring0 = pci_alloc_consistent(NULL, NUM_RX_DESC * sizeof(struct PDMA_rxdesc), &ei_local->phy_rx_ring0);
++#endif
++ for (i = 0; i < NUM_RX_DESC; i++) {
++ memset(&ei_local->rx_ring0[i],0,sizeof(struct PDMA_rxdesc));
++ ei_local->rx_ring0[i].rxd_info2.DDONE_bit = 0;
++#if defined (CONFIG_RAETH_SCATTER_GATHER_RX_DMA)
++ ei_local->rx_ring0[i].rxd_info2.LS0 = 0;
++ ei_local->rx_ring0[i].rxd_info2.PLEN0 = MAX_RX_LENGTH;
++#else
++ ei_local->rx_ring0[i].rxd_info2.LS0 = 1;
++#endif
++ ei_local->rx_ring0[i].rxd_info1.PDP0 = dma_map_single(NULL, ei_local->netrx0_skbuf[i]->data, MAX_RX_LENGTH, PCI_DMA_FROMDEVICE);
++ }
++ printk("\nphy_rx_ring0 = 0x%08x, rx_ring0 = 0x%p\n",ei_local->phy_rx_ring0,ei_local->rx_ring0);
++
++#if defined (CONFIG_RAETH_MULTIPLE_RX_RING)
++ /* Initial RX Ring 1*/
++#ifdef CONFIG_32B_DESC
++ ei_local->rx_ring1 = kmalloc(NUM_RX_DESC * sizeof(struct PDMA_rxdesc), GFP_KERNEL);
++ ei_local->phy_rx_ring1 = virt_to_phys(ei_local->rx_ring1);
++#else
++ ei_local->rx_ring1 = pci_alloc_consistent(NULL, NUM_RX_DESC * sizeof(struct PDMA_rxdesc), &ei_local->phy_rx_ring1);
++#endif
++ for (i = 0; i < NUM_RX_DESC; i++) {
++ memset(&ei_local->rx_ring1[i],0,sizeof(struct PDMA_rxdesc));
++ ei_local->rx_ring1[i].rxd_info2.DDONE_bit = 0;
++#if defined (CONFIG_RAETH_SCATTER_GATHER_RX_DMA)
++ ei_local->rx_ring0[i].rxd_info2.LS0 = 0;
++ ei_local->rx_ring0[i].rxd_info2.PLEN0 = MAX_RX_LENGTH;
++#else
++ ei_local->rx_ring1[i].rxd_info2.LS0 = 1;
++#endif
++ ei_local->rx_ring1[i].rxd_info1.PDP0 = dma_map_single(NULL, ei_local->netrx1_skbuf[i]->data, MAX_RX_LENGTH, PCI_DMA_FROMDEVICE);
++ }
++ printk("\nphy_rx_ring1 = 0x%08x, rx_ring1 = 0x%p\n",ei_local->phy_rx_ring1,ei_local->rx_ring1);
++#endif
++
++ regVal = sysRegRead(QDMA_GLO_CFG);
++ regVal &= 0x000000FF;
++ sysRegWrite(QDMA_GLO_CFG, regVal);
++ regVal=sysRegRead(QDMA_GLO_CFG);
++
++ /* Tell the adapter where the TX/RX rings are located. */
++
++ sysRegWrite(QRX_BASE_PTR_0, phys_to_bus((u32) ei_local->phy_rx_ring0));
++ sysRegWrite(QRX_MAX_CNT_0, cpu_to_le32((u32) NUM_RX_DESC));
++ sysRegWrite(QRX_CRX_IDX_0, cpu_to_le32((u32) (NUM_RX_DESC - 1)));
++#ifdef CONFIG_RAETH_RW_PDMAPTR_FROM_VAR
++ rx_calc_idx0 = rx_dma_owner_idx0 = sysRegRead(QRX_CRX_IDX_0);
++#endif
++ sysRegWrite(QDMA_RST_CFG, PST_DRX_IDX0);
++#if defined (CONFIG_RAETH_MULTIPLE_RX_RING)
++ sysRegWrite(QRX_BASE_PTR_1, phys_to_bus((u32) ei_local->phy_rx_ring1));
++ sysRegWrite(QRX_MAX_CNT_1, cpu_to_le32((u32) NUM_RX_DESC));
++ sysRegWrite(QRX_CRX_IDX_1, cpu_to_le32((u32) (NUM_RX_DESC - 1)));
++#ifdef CONFIG_RAETH_RW_PDMAPTR_FROM_VAR
++ rx_calc_idx1 = rx_dma_owner_idx1 = sysRegRead(QRX_CRX_IDX_1);
++#endif
++ sysRegWrite(QDMA_RST_CFG, PST_DRX_IDX1);
++#endif
++
++ set_fe_dma_glo_cfg();
++
++ return 1;
++}
++
++inline int rt2880_eth_send(struct net_device* dev, struct sk_buff *skb, int gmac_no)
++{
++ unsigned int length=skb->len;
++ END_DEVICE* ei_local = netdev_priv(dev);
++
++ struct QDMA_txdesc *cpu_ptr;
++
++ struct QDMA_txdesc *dma_ptr __maybe_unused;
++ struct QDMA_txdesc *free_txd;
++ int ctx_offset;
++#if defined (CONFIG_RAETH_TSO)
++ struct iphdr *iph = NULL;
++ struct QDMA_txdesc *init_cpu_ptr;
++ struct tcphdr *th = NULL;
++ struct skb_frag_struct *frag;
++ unsigned int nr_frags = skb_shinfo(skb)->nr_frags;
++ int i=0;
++ int init_txd_idx;
++#endif // CONFIG_RAETH_TSO //
++
++#if defined (CONFIG_RAETH_TSOV6)
++ struct ipv6hdr *ip6h = NULL;
++#endif
++
++#ifdef CONFIG_PSEUDO_SUPPORT
++ PSEUDO_ADAPTER *pAd;
++#endif
++ cpu_ptr = PHYS_TO_VIRT(ei_local->tx_cpu_ptr);
++ dma_ptr = PHYS_TO_VIRT(ei_local->tx_dma_ptr);
++ ctx_offset = GET_TXD_OFFSET(&cpu_ptr);
++ ei_local->skb_free[ctx_offset] = skb;
++#if defined (CONFIG_RAETH_TSO)
++ init_cpu_ptr = cpu_ptr;
++ init_txd_idx = ctx_offset;
++#endif
++
++#if !defined (CONFIG_RAETH_TSO)
++
++ //2. prepare data
++ cpu_ptr->txd_info1.SDP = VIRT_TO_PHYS(skb->data);
++ cpu_ptr->txd_info3.SDL = skb->len;
++
++ if (gmac_no == 1) {
++ cpu_ptr->txd_info4.FPORT = 1;
++ }else {
++ cpu_ptr->txd_info4.FPORT = 2;
++ }
++
++
++ cpu_ptr->txd_info3.QID = M2Q_table[skb->mark];
++#if 0
++ iph = (struct iphdr *)skb_network_header(skb);
++ if (iph->tos == 0xe0)
++ cpu_ptr->txd_info3.QID = 3;
++ else if (iph->tos == 0xa0)
++ cpu_ptr->txd_info3.QID = 2;
++ else if (iph->tos == 0x20)
++ cpu_ptr->txd_info3.QID = 1;
++ else
++ cpu_ptr->txd_info3.QID = 0;
++#endif
++
++#if defined (CONFIG_RAETH_CHECKSUM_OFFLOAD) && ! defined(CONFIG_RALINK_RT5350) && !defined (CONFIG_RALINK_MT7628)
++ if (skb->ip_summed == CHECKSUM_PARTIAL){
++ cpu_ptr->txd_info4.TUI_CO = 7;
++ }else {
++ cpu_ptr->txd_info4.TUI_CO = 0;
++ }
++#endif
++
++#ifdef CONFIG_RAETH_HW_VLAN_TX
++ if(vlan_tx_tag_present(skb)) {
++ cpu_ptr->txd_info4.VLAN_TAG = 0x10000 | vlan_tx_tag_get(skb);
++ }else {
++ cpu_ptr->txd_info4.VLAN_TAG = 0;
++ }
++#endif
++
++#if defined (CONFIG_RA_HW_NAT) || defined (CONFIG_RA_HW_NAT_MODULE)
++ if(FOE_MAGIC_TAG(skb) == FOE_MAGIC_PPE) {
++ if(ra_sw_nat_hook_rx!= NULL){
++ cpu_ptr->txd_info4.FPORT = 4; /* PPE */
++ FOE_MAGIC_TAG(skb) = 0;
++ }
++ }
++#endif
++#if 0
++ cpu_ptr->txd_info4.FPORT = 4; /* PPE */
++ cpu_ptr->txd_info4.UDF = 0x2F;
++#endif
++
++ dma_cache_sync(NULL, skb->data, skb->len, DMA_TO_DEVICE);
++ cpu_ptr->txd_info3.SWC_bit = 1;
++
++ //3. get NULL TXD and decrease free_tx_num by 1.
++ ctx_offset = get_free_txd(&free_txd);
++ if(ctx_offset == NUM_TX_DESC) {
++ printk("get_free_txd fail\n"); // this should not happen. free_txd_num is 2 at least.
++ return 0;
++ }
++
++ //4. hook new TXD in the end of queue
++ cpu_ptr->txd_info2.NDP = VIRT_TO_PHYS(free_txd);
++
++
++ //5. move CPU_PTR to new TXD
++ ei_local->tx_cpu_ptr = VIRT_TO_PHYS(free_txd);
++ cpu_ptr->txd_info3.OWN_bit = 0;
++ sysRegWrite(QTX_CTX_PTR, ei_local->tx_cpu_ptr);
++
++#if 0
++ printk("----------------------------------------------\n");
++ printk("txd_info1:%08X \n",*(int *)&cpu_ptr->txd_info1);
++ printk("txd_info2:%08X \n",*(int *)&cpu_ptr->txd_info2);
++ printk("txd_info3:%08X \n",*(int *)&cpu_ptr->txd_info3);
++ printk("txd_info4:%08X \n",*(int *)&cpu_ptr->txd_info4);
++#endif
++
++#else //#if !defined (CONFIG_RAETH_TSO)
++ cpu_ptr->txd_info1.SDP = VIRT_TO_PHYS(skb->data);
++ cpu_ptr->txd_info3.SDL = (length - skb->data_len);
++ cpu_ptr->txd_info3.LS_bit = nr_frags ? 0:1;
++ if (gmac_no == 1) {
++ cpu_ptr->txd_info4.FPORT = 1;
++ }else {
++ cpu_ptr->txd_info4.FPORT = 2;
++ }
++
++ cpu_ptr->txd_info4.TSO = 0;
++ cpu_ptr->txd_info3.QID = M2Q_table[skb->mark];
++#if defined (CONFIG_RAETH_CHECKSUM_OFFLOAD) && ! defined(CONFIG_RALINK_RT5350) && !defined (CONFIG_RALINK_MT7628)
++ if (skb->ip_summed == CHECKSUM_PARTIAL){
++ cpu_ptr->txd_info4.TUI_CO = 7;
++ }else {
++ cpu_ptr->txd_info4.TUI_CO = 0;
++ }
++#endif
++
++#ifdef CONFIG_RAETH_HW_VLAN_TX
++ if(vlan_tx_tag_present(skb)) {
++ cpu_ptr->txd_info4.VLAN_TAG = 0x10000 | vlan_tx_tag_get(skb);
++ }else {
++ cpu_ptr->txd_info4.VLAN_TAG = 0;
++ }
++#endif
++
++#if defined (CONFIG_RA_HW_NAT) || defined (CONFIG_RA_HW_NAT_MODULE)
++ if(FOE_MAGIC_TAG(skb) == FOE_MAGIC_PPE) {
++ if(ra_sw_nat_hook_rx!= NULL){
++ cpu_ptr->txd_info4.FPORT = 4; /* PPE */
++ FOE_MAGIC_TAG(skb) = 0;
++ }
++ }
++#endif
++
++ cpu_ptr->txd_info3.SWC_bit = 1;
++
++ ctx_offset = get_free_txd(&free_txd);
++ if(ctx_offset == NUM_TX_DESC) {
++ printk("get_free_txd fail\n");
++ return 0;
++ }
++ cpu_ptr->txd_info2.NDP = VIRT_TO_PHYS(free_txd);
++ ei_local->tx_cpu_ptr = VIRT_TO_PHYS(free_txd);
++
++ if(nr_frags > 0) {
++ for(i=0;i<nr_frags;i++) {
++ frag = &skb_shinfo(skb)->frags[i];
++ cpu_ptr = free_txd;
++ cpu_ptr->txd_info3.QID = M2Q_table[skb->mark];
++ cpu_ptr->txd_info1.SDP = pci_map_page(NULL, frag->page, frag->page_offset, frag->size, PCI_DMA_TODEVICE);
++ cpu_ptr->txd_info3.SDL = frag->size;
++ cpu_ptr->txd_info3.LS_bit = (i==nr_frags-1)?1:0;
++ cpu_ptr->txd_info3.OWN_bit = 0;
++ cpu_ptr->txd_info3.SWC_bit = 1;
++ ei_local->skb_free[ctx_offset] = (i==nr_frags-1)?skb:(struct sk_buff *)0xFFFFFFFF; //MAGIC ID
++
++ ctx_offset = get_free_txd(&free_txd);
++ cpu_ptr->txd_info2.NDP = VIRT_TO_PHYS(free_txd);
++ ei_local->tx_cpu_ptr = VIRT_TO_PHYS(free_txd);
++ }
++ ei_local->skb_free[init_txd_idx]= (struct sk_buff *)0xFFFFFFFF; //MAGIC ID
++ }
++
++ if(skb_shinfo(skb)->gso_segs > 1) {
++
++// TsoLenUpdate(skb->len);
++
++ /* TCP over IPv4 */
++ iph = (struct iphdr *)skb_network_header(skb);
++#if defined (CONFIG_RAETH_TSOV6)
++ /* TCP over IPv6 */
++ ip6h = (struct ipv6hdr *)skb_network_header(skb);
++#endif
++ if((iph->version == 4) && (iph->protocol == IPPROTO_TCP)) {
++ th = (struct tcphdr *)skb_transport_header(skb);
++
++ init_cpu_ptr->txd_info4.TSO = 1;
++
++ th->check = htons(skb_shinfo(skb)->gso_size);
++ dma_cache_sync(NULL, th, sizeof(struct tcphdr), DMA_TO_DEVICE);
++ }
++
++#if defined (CONFIG_RAETH_TSOV6)
++ /* TCP over IPv6 */
++ //ip6h = (struct ipv6hdr *)skb_network_header(skb);
++ else if ((ip6h->version == 6) && (ip6h->nexthdr == NEXTHDR_TCP)) {
++ th = (struct tcphdr *)skb_transport_header(skb);
++#ifdef CONFIG_RAETH_RW_PDMAPTR_FROM_VAR
++ init_cpu_ptr->txd_info4.TSO = 1;
++#else
++ init_cpu_ptr->txd_info4.TSO = 1;
++#endif
++ th->check = htons(skb_shinfo(skb)->gso_size);
++ dma_cache_sync(NULL, th, sizeof(struct tcphdr), DMA_TO_DEVICE);
++ }
++#endif
++ }
++
++
++// dma_cache_sync(NULL, skb->data, skb->len, DMA_TO_DEVICE);
++
++ init_cpu_ptr->txd_info3.OWN_bit = 0;
++#endif // CONFIG_RAETH_TSO //
++
++ sysRegWrite(QTX_CTX_PTR, ei_local->tx_cpu_ptr);
++
++#ifdef CONFIG_PSEUDO_SUPPORT
++ if (gmac_no == 2) {
++ if (ei_local->PseudoDev != NULL) {
++ pAd = netdev_priv(ei_local->PseudoDev);
++ pAd->stat.tx_packets++;
++ pAd->stat.tx_bytes += length;
++ }
++ } else
++
++#endif
++ {
++ ei_local->stat.tx_packets++;
++ ei_local->stat.tx_bytes += skb->len;
++ }
++ return length;
++}
++
++int ei_start_xmit(struct sk_buff* skb, struct net_device *dev, int gmac_no)
++{
++ END_DEVICE *ei_local = netdev_priv(dev);
++ unsigned long flags;
++ unsigned int num_of_txd;
++#if defined (CONFIG_RAETH_TSO)
++ unsigned int nr_frags = skb_shinfo(skb)->nr_frags;
++#endif
++#ifdef CONFIG_PSEUDO_SUPPORT
++ PSEUDO_ADAPTER *pAd;
++#endif
++
++#if !defined(CONFIG_RA_NAT_NONE)
++ if(ra_sw_nat_hook_tx!= NULL)
++ {
++ spin_lock_irqsave(&ei_local->page_lock, flags);
++ if(ra_sw_nat_hook_tx(skb, gmac_no)==1){
++ spin_unlock_irqrestore(&ei_local->page_lock, flags);
++ }else{
++ kfree_skb(skb);
++ spin_unlock_irqrestore(&ei_local->page_lock, flags);
++ return 0;
++ }
++ }
++#endif
++
++
++
++ dev->trans_start = jiffies; /* save the timestamp */
++ spin_lock_irqsave(&ei_local->page_lock, flags);
++ dma_cache_sync(NULL, skb->data, skb->len, DMA_TO_DEVICE);
++
++
++//check free_txd_num before calling rt288_eth_send()
++
++#if defined (CONFIG_RAETH_TSO)
++ num_of_txd = (nr_frags==0) ? 1 : (nr_frags + 1);
++#else
++ num_of_txd = 1;
++#endif
++
++#if defined(CONFIG_RALINK_MT7621)
++ if(sysRegRead(0xbe00000c)==0x00030101) {
++ ei_xmit_housekeeping(0);
++ }
++#endif
++
++
++ if ((ei_local->free_txd_num > num_of_txd + 1) && (ei_local->free_txd_num != NUM_TX_DESC))
++ {
++ rt2880_eth_send(dev, skb, gmac_no); // need to modify rt2880_eth_send() for QDMA
++ if (ei_local->free_txd_num < 3)
++ {
++#if defined (CONFIG_RAETH_STOP_RX_WHEN_TX_FULL)
++ netif_stop_queue(dev);
++#ifdef CONFIG_PSEUDO_SUPPORT
++ netif_stop_queue(ei_local->PseudoDev);
++#endif
++ tx_ring_full = 1;
++#endif
++ }
++ } else {
++#ifdef CONFIG_PSEUDO_SUPPORT
++ if (gmac_no == 2)
++ {
++ if (ei_local->PseudoDev != NULL)
++ {
++ pAd = netdev_priv(ei_local->PseudoDev);
++ pAd->stat.tx_dropped++;
++ }
++ } else
++#endif
++ ei_local->stat.tx_dropped++;
++ kfree_skb(skb);
++ spin_unlock_irqrestore(&ei_local->page_lock, flags);
++ return 0;
++ }
++ spin_unlock_irqrestore(&ei_local->page_lock, flags);
++ return 0;
++}
++
++void ei_xmit_housekeeping(unsigned long unused)
++{
++ struct net_device *dev = dev_raether;
++ END_DEVICE *ei_local = netdev_priv(dev);
++#ifndef CONFIG_RAETH_NAPI
++ unsigned long reg_int_mask=0;
++#endif
++ struct QDMA_txdesc *dma_ptr = NULL;
++ struct QDMA_txdesc *cpu_ptr = NULL;
++ struct QDMA_txdesc *tmp_ptr = NULL;
++ unsigned int htx_offset = 0;
++
++ dma_ptr = PHYS_TO_VIRT(sysRegRead(QTX_DRX_PTR));
++ cpu_ptr = PHYS_TO_VIRT(sysRegRead(QTX_CRX_PTR));
++ if(cpu_ptr != dma_ptr && (cpu_ptr->txd_info3.OWN_bit == 1)) {
++ while(cpu_ptr != dma_ptr && (cpu_ptr->txd_info3.OWN_bit == 1)) {
++
++ //1. keep cpu next TXD
++ tmp_ptr = PHYS_TO_VIRT(cpu_ptr->txd_info2.NDP);
++ htx_offset = GET_TXD_OFFSET(&tmp_ptr);
++ //2. free skb meomry
++#if defined (CONFIG_RAETH_TSO)
++ if(ei_local->skb_free[htx_offset]!=(struct sk_buff *)0xFFFFFFFF) {
++ dev_kfree_skb_any(ei_local->skb_free[htx_offset]);
++ }
++#else
++ dev_kfree_skb_any(ei_local->skb_free[htx_offset]);
++#endif
++
++ //3. release TXD
++ htx_offset = GET_TXD_OFFSET(&cpu_ptr);
++ put_free_txd(htx_offset);
++
++ netif_wake_queue(dev);
++#ifdef CONFIG_PSEUDO_SUPPORT
++ netif_wake_queue(ei_local->PseudoDev);
++#endif
++ tx_ring_full=0;
++
++ //4. update cpu_ptr to next ptr
++ cpu_ptr = tmp_ptr;
++ }
++ }
++ sysRegWrite(QTX_CRX_PTR, VIRT_TO_PHYS(cpu_ptr));
++#ifndef CONFIG_RAETH_NAPI
++ reg_int_mask=sysRegRead(QFE_INT_ENABLE);
++#if defined (DELAY_INT)
++ sysRegWrite(FE_INT_ENABLE, reg_int_mask| RLS_DLY_INT);
++#else
++
++ sysRegWrite(FE_INT_ENABLE, reg_int_mask | RLS_DONE_INT);
++#endif
++#endif //CONFIG_RAETH_NAPI//
++}
++
++EXPORT_SYMBOL(ei_start_xmit);
++EXPORT_SYMBOL(ei_xmit_housekeeping);
++EXPORT_SYMBOL(fe_dma_init);
++EXPORT_SYMBOL(rt2880_eth_send);
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0037-USB-phy-add-ralink-SoC-driver.patch b/target/linux/ramips/patches-3.14/0037-USB-phy-add-ralink-SoC-driver.patch
new file mode 100644
index 0000000000..b0c9a1af8b
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0037-USB-phy-add-ralink-SoC-driver.patch
@@ -0,0 +1,240 @@
+From 900fa0abfea0cb7562c523769981dadc25f1f8cd Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 27 Jul 2014 09:43:42 +0100
+Subject: [PATCH 37/57] USB: phy: add ralink SoC driver
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/usb/phy/Kconfig | 8 ++
+ drivers/usb/phy/Makefile | 1 +
+ drivers/usb/phy/ralink-phy.c | 190 ++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 199 insertions(+)
+ create mode 100644 drivers/usb/phy/ralink-phy.c
+
+diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
+index 7d1451d..fc04d76 100644
+--- a/drivers/usb/phy/Kconfig
++++ b/drivers/usb/phy/Kconfig
+@@ -251,6 +251,14 @@ config USB_RCAR_GEN2_PHY
+ To compile this driver as a module, choose M here: the
+ module will be called phy-rcar-gen2-usb.
+
++config RALINK_USBPHY
++ bool "Ralink USB PHY controller Driver"
++ depends on MIPS && RALINK
++ select USB_PHY
++ help
++ Enable this to support ralink USB phy controller for ralink
++ SoCs.
++
+ config USB_ULPI
+ bool "Generic ULPI Transceiver Driver"
+ depends on ARM
+diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
+index be58ada..52d59c1 100644
+--- a/drivers/usb/phy/Makefile
++++ b/drivers/usb/phy/Makefile
+@@ -33,3 +33,4 @@ obj-$(CONFIG_USB_RCAR_GEN2_PHY) += phy-rcar-gen2-usb.o
+ obj-$(CONFIG_USB_ULPI) += phy-ulpi.o
+ obj-$(CONFIG_USB_ULPI_VIEWPORT) += phy-ulpi-viewport.o
+ obj-$(CONFIG_KEYSTONE_USB_PHY) += phy-keystone.o
++obj-$(CONFIG_RALINK_USBPHY) += ralink-phy.o
+diff --git a/drivers/usb/phy/ralink-phy.c b/drivers/usb/phy/ralink-phy.c
+new file mode 100644
+index 0000000..28046e5
+--- /dev/null
++++ b/drivers/usb/phy/ralink-phy.c
+@@ -0,0 +1,190 @@
++/*
++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
++ *
++ * based on: Renesas R-Car USB phy driver
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/delay.h>
++#include <linux/io.h>
++#include <linux/usb/otg.h>
++#include <linux/of_platform.h>
++#include <linux/platform_device.h>
++#include <linux/spinlock.h>
++#include <linux/module.h>
++#include <linux/reset.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#define RT_SYSC_REG_SYSCFG1 0x014
++#define RT_SYSC_REG_CLKCFG1 0x030
++#define RT_SYSC_REG_USB_PHY_CFG 0x05c
++
++#define RT_RSTCTRL_UDEV BIT(25)
++#define RT_RSTCTRL_UHST BIT(22)
++#define RT_SYSCFG1_USB0_HOST_MODE BIT(10)
++
++#define MT7620_CLKCFG1_UPHY0_CLK_EN BIT(25)
++#define RT_CLKCFG1_UPHY1_CLK_EN BIT(20)
++#define RT_CLKCFG1_UPHY0_CLK_EN BIT(18)
++
++#define USB_PHY_UTMI_8B60M BIT(1)
++#define UDEV_WAKEUP BIT(0)
++
++static atomic_t usb_pwr_ref = ATOMIC_INIT(0);
++static struct reset_control *rstdev;
++static struct reset_control *rsthost;
++static u32 phy_clk;
++
++static void usb_phy_enable(int state)
++{
++ if (state)
++ rt_sysc_m32(0, phy_clk, RT_SYSC_REG_CLKCFG1);
++ else
++ rt_sysc_m32(phy_clk, 0, RT_SYSC_REG_CLKCFG1);
++ mdelay(100);
++}
++
++static int usb_power_on(struct usb_phy *phy)
++{
++ if (atomic_inc_return(&usb_pwr_ref) == 1) {
++ u32 t;
++
++ usb_phy_enable(1);
++
++// reset_control_assert(rstdev);
++// reset_control_assert(rsthost);
++
++ if (OTG_STATE_B_HOST) {
++ rt_sysc_m32(0, RT_SYSCFG1_USB0_HOST_MODE, RT_SYSC_REG_SYSCFG1);
++ if (!IS_ERR(rsthost))
++ reset_control_deassert(rsthost);
++ } else {
++ rt_sysc_m32(RT_SYSCFG1_USB0_HOST_MODE, 0, RT_SYSC_REG_SYSCFG1);
++ if (!IS_ERR(rstdev))
++ reset_control_deassert(rstdev);
++ }
++ mdelay(100);
++
++ t = rt_sysc_r32(RT_SYSC_REG_USB_PHY_CFG);
++ dev_info(phy->dev, "remote usb device wakeup %s\n",
++ (t & UDEV_WAKEUP) ? ("enabbled") : ("disabled"));
++ if (t & USB_PHY_UTMI_8B60M)
++ dev_info(phy->dev, "UTMI 8bit 60MHz\n");
++ else
++ dev_info(phy->dev, "UTMI 16bit 30MHz\n");
++ }
++
++ return 0;
++}
++
++static void usb_power_off(struct usb_phy *phy)
++{
++ if (atomic_dec_return(&usb_pwr_ref) == 0) {
++ usb_phy_enable(0);
++ if (!IS_ERR(rstdev))
++ reset_control_assert(rstdev);
++ if (!IS_ERR(rsthost))
++ reset_control_assert(rsthost);
++ }
++}
++
++static int usb_set_host(struct usb_otg *otg, struct usb_bus *host)
++{
++ otg->gadget = NULL;
++ otg->host = host;
++
++ return 0;
++}
++
++static int usb_set_peripheral(struct usb_otg *otg,
++ struct usb_gadget *gadget)
++{
++ otg->host = NULL;
++ otg->gadget = gadget;
++
++ return 0;
++}
++
++static const struct of_device_id ralink_usbphy_dt_match[] = {
++ { .compatible = "ralink,rt3xxx-usbphy", .data = (void *) (RT_CLKCFG1_UPHY1_CLK_EN | RT_CLKCFG1_UPHY0_CLK_EN) },
++ { .compatible = "ralink,mt7620a-usbphy", .data = (void *) MT7620_CLKCFG1_UPHY0_CLK_EN },
++ {},
++};
++MODULE_DEVICE_TABLE(of, ralink_usbphy_dt_match);
++
++static int usb_phy_probe(struct platform_device *pdev)
++{
++ const struct of_device_id *match;
++ struct device *dev = &pdev->dev;
++ struct usb_otg *otg;
++ struct usb_phy *phy;
++ int ret;
++
++ match = of_match_device(ralink_usbphy_dt_match, &pdev->dev);
++ phy_clk = (int) match->data;
++
++ rsthost = devm_reset_control_get(&pdev->dev, "host");
++ rstdev = devm_reset_control_get(&pdev->dev, "device");
++
++ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
++ if (!phy) {
++ dev_err(&pdev->dev, "unable to allocate memory for USB PHY\n");
++ return -ENOMEM;
++ }
++
++ otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
++ if (!otg) {
++ dev_err(&pdev->dev, "unable to allocate memory for USB OTG\n");
++ return -ENOMEM;
++ }
++
++ phy->dev = dev;
++ phy->label = dev_name(dev);
++ phy->init = usb_power_on;
++ phy->shutdown = usb_power_off;
++ otg->set_host = usb_set_host;
++ otg->set_peripheral = usb_set_peripheral;
++ otg->phy = phy;
++ phy->otg = otg;
++ ret = usb_add_phy(phy, USB_PHY_TYPE_USB2);
++
++ if (ret < 0) {
++ dev_err(dev, "usb phy addition error\n");
++ return ret;
++ }
++
++ platform_set_drvdata(pdev, phy);
++
++ dev_info(&pdev->dev, "loaded\n");
++
++ return ret;
++}
++
++static int usb_phy_remove(struct platform_device *pdev)
++{
++ struct usb_phy *phy = platform_get_drvdata(pdev);
++
++ usb_remove_phy(phy);
++
++ return 0;
++}
++
++static struct platform_driver usb_phy_driver = {
++ .driver = {
++ .owner = THIS_MODULE,
++ .name = "rt3xxx-usbphy",
++ .of_match_table = of_match_ptr(ralink_usbphy_dt_match),
++ },
++ .probe = usb_phy_probe,
++ .remove = usb_phy_remove,
++};
++
++module_platform_driver(usb_phy_driver);
++
++MODULE_LICENSE("GPL v2");
++MODULE_DESCRIPTION("Ralink USB phy");
++MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0038-USB-add-OHCI-EHCI-OF-binding.patch b/target/linux/ramips/patches-3.14/0038-USB-add-OHCI-EHCI-OF-binding.patch
new file mode 100644
index 0000000000..87d2c30232
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0038-USB-add-OHCI-EHCI-OF-binding.patch
@@ -0,0 +1,191 @@
+From ffb27de4760595c356ef619c97f25722c8db28e7 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 27 Jul 2014 09:49:07 +0100
+Subject: [PATCH 38/57] USB: add OHCI/EHCI OF binding
+
+based on f3bc64d6d1f21c1b92d75f233a37b75d77af6963
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/usb/Makefile | 3 ++-
+ drivers/usb/host/ehci-platform.c | 21 +++++++++++++++++----
+ drivers/usb/host/ohci-platform.c | 37 +++++++++++++++++++++++++++++++------
+ 3 files changed, 50 insertions(+), 11 deletions(-)
+
+diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
+index 1ae2bf3..aaa15d9 100644
+--- a/drivers/usb/Makefile
++++ b/drivers/usb/Makefile
+@@ -11,6 +11,8 @@ obj-$(CONFIG_USB_DWC2) += dwc2/
+
+ obj-$(CONFIG_USB_MON) += mon/
+
++obj-$(CONFIG_USB_PHY) += phy/
++
+ obj-$(CONFIG_PCI) += host/
+ obj-$(CONFIG_USB_EHCI_HCD) += host/
+ obj-$(CONFIG_USB_ISP116X_HCD) += host/
+@@ -41,7 +43,6 @@ obj-$(CONFIG_USB_TMC) += class/
+ obj-$(CONFIG_USB_STORAGE) += storage/
+ obj-$(CONFIG_USB) += storage/
+
+-obj-$(CONFIG_USB_MDC800) += image/
+ obj-$(CONFIG_USB_MICROTEK) += image/
+
+ obj-$(CONFIG_USB_SERIAL) += serial/
+diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
+index 01536cf..1b9a8f4 100644
+--- a/drivers/usb/host/ehci-platform.c
++++ b/drivers/usb/host/ehci-platform.c
+@@ -29,6 +29,8 @@
+ #include <linux/usb.h>
+ #include <linux/usb/hcd.h>
+ #include <linux/usb/ehci_pdriver.h>
++#include <linux/usb/phy.h>
++#include <linux/usb/otg.h>
+
+ #include "ehci.h"
+
+@@ -123,6 +125,15 @@ static int ehci_platform_probe(struct platform_device *dev)
+ hcd->rsrc_start = res_mem->start;
+ hcd->rsrc_len = resource_size(res_mem);
+
++#ifdef CONFIG_USB_PHY
++ hcd->phy = devm_usb_get_phy(&dev->dev, USB_PHY_TYPE_USB2);
++ if (!IS_ERR_OR_NULL(hcd->phy)) {
++ otg_set_host(hcd->phy->otg,
++ &hcd->self);
++ usb_phy_init(hcd->phy);
++ }
++#endif
++
+ hcd->regs = devm_ioremap_resource(&dev->dev, res_mem);
+ if (IS_ERR(hcd->regs)) {
+ err = PTR_ERR(hcd->regs);
+@@ -160,6 +171,9 @@ static int ehci_platform_remove(struct platform_device *dev)
+ if (pdata == &ehci_platform_defaults)
+ dev->dev.platform_data = NULL;
+
++ if (pdata == &ehci_platform_defaults)
++ dev->dev.platform_data = NULL;
++
+ return 0;
+ }
+
+@@ -204,9 +218,8 @@ static int ehci_platform_resume(struct device *dev)
+ #define ehci_platform_resume NULL
+ #endif /* CONFIG_PM */
+
+-static const struct of_device_id vt8500_ehci_ids[] = {
+- { .compatible = "via,vt8500-ehci", },
+- { .compatible = "wm,prizm-ehci", },
++static const struct of_device_id ralink_ehci_ids[] = {
++ { .compatible = "ralink,rt3xxx-ehci", },
+ {}
+ };
+
+@@ -230,7 +243,7 @@ static struct platform_driver ehci_platform_driver = {
+ .owner = THIS_MODULE,
+ .name = "ehci-platform",
+ .pm = &ehci_platform_pm_ops,
+- .of_match_table = vt8500_ehci_ids,
++ .of_match_table = ralink_ehci_ids,
+ }
+ };
+
+diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
+index 68f674c..2a73fed 100644
+--- a/drivers/usb/host/ohci-platform.c
++++ b/drivers/usb/host/ohci-platform.c
+@@ -23,17 +23,20 @@
+ #include <linux/usb/ohci_pdriver.h>
+ #include <linux/usb.h>
+ #include <linux/usb/hcd.h>
++#include <linux/dma-mapping.h>
++#include <linux/of.h>
+
+ #include "ohci.h"
+
+ #define DRIVER_DESC "OHCI generic platform driver"
+
++static struct usb_ohci_pdata ohci_platform_defaults;
+ static const char hcd_name[] = "ohci-platform";
+
+ static int ohci_platform_reset(struct usb_hcd *hcd)
+ {
+ struct platform_device *pdev = to_platform_device(hcd->self.controller);
+- struct usb_ohci_pdata *pdata = dev_get_platdata(&pdev->dev);
++ struct usb_ohci_pdata *pdata;
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+
+ if (pdata->big_endian_desc)
+@@ -63,11 +66,18 @@ static int ohci_platform_probe(struct platform_device *dev)
+ int irq;
+ int err = -ENOMEM;
+
+- if (!pdata) {
+- WARN_ON(1);
+- return -ENODEV;
+- }
+-
++ /*
++ * use reasonable defaults so platforms don't have to provide these.
++ * with DT probing on ARM, none of these are set.
++ */
++ if (!dev->dev.platform_data)
++ dev->dev.platform_data = &ohci_platform_defaults;
++ if (!dev->dev.dma_mask)
++ dev->dev.dma_mask = &dev->dev.coherent_dma_mask;
++ if (!dev->dev.coherent_dma_mask)
++ dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
++
++ pdata = dev->dev.platform_data;
+ if (usb_disabled())
+ return -ENODEV;
+
+@@ -99,6 +109,12 @@ static int ohci_platform_probe(struct platform_device *dev)
+ hcd->rsrc_start = res_mem->start;
+ hcd->rsrc_len = resource_size(res_mem);
+
++#ifdef CONFIG_USB_PHY
++ hcd->phy = devm_usb_get_phy(&dev->dev, USB_PHY_TYPE_USB2);
++ if (!IS_ERR_OR_NULL(hcd->phy))
++ usb_phy_init(hcd->phy);
++#endif
++
+ hcd->regs = devm_ioremap_resource(&dev->dev, res_mem);
+ if (IS_ERR(hcd->regs)) {
+ err = PTR_ERR(hcd->regs);
+@@ -134,6 +150,9 @@ static int ohci_platform_remove(struct platform_device *dev)
+ if (pdata->power_off)
+ pdata->power_off(dev);
+
++ if (pdata == &ohci_platform_defaults)
++ dev->dev.platform_data = NULL;
++
+ return 0;
+ }
+
+@@ -180,6 +199,11 @@ static int ohci_platform_resume(struct device *dev)
+ #define ohci_platform_resume NULL
+ #endif /* CONFIG_PM */
+
++static const struct of_device_id ralink_ohci_ids[] = {
++ { .compatible = "ralink,rt3xxx-ohci", },
++ {}
++};
++
+ static const struct platform_device_id ohci_platform_table[] = {
+ { "ohci-platform", 0 },
+ { }
+@@ -200,6 +224,7 @@ static struct platform_driver ohci_platform_driver = {
+ .owner = THIS_MODULE,
+ .name = "ohci-platform",
+ .pm = &ohci_platform_pm_ops,
++ .of_match_table = of_match_ptr(ralink_ohci_ids),
+ }
+ };
+
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0039-USB-adds-dwc_otg.patch b/target/linux/ramips/patches-3.14/0039-USB-adds-dwc_otg.patch
new file mode 100644
index 0000000000..c7592ac1ef
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0039-USB-adds-dwc_otg.patch
@@ -0,0 +1,24581 @@
+From 761432b4edfa1276726c082ba21199236c13a23f Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 27 Jul 2014 09:50:54 +0100
+Subject: [PATCH 39/57] USB: adds dwc_otg
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/usb/Kconfig | 2 +
+ drivers/usb/Makefile | 1 +
+ drivers/usb/dwc_otg/Kconfig | 24 +
+ drivers/usb/dwc_otg/Makefile | 25 +
+ drivers/usb/dwc_otg/dummy_audio.c | 1575 +++++++++++++
+ drivers/usb/dwc_otg/dwc_otg_attr.c | 966 ++++++++
+ drivers/usb/dwc_otg/dwc_otg_attr.h | 67 +
+ drivers/usb/dwc_otg/dwc_otg_cil.c | 3692 ++++++++++++++++++++++++++++++
+ drivers/usb/dwc_otg/dwc_otg_cil.h | 1098 +++++++++
+ drivers/usb/dwc_otg/dwc_otg_cil_intr.c | 750 ++++++
+ drivers/usb/dwc_otg/dwc_otg_driver.c | 1273 ++++++++++
+ drivers/usb/dwc_otg/dwc_otg_driver.h | 83 +
+ drivers/usb/dwc_otg/dwc_otg_hcd.c | 2852 +++++++++++++++++++++++
+ drivers/usb/dwc_otg/dwc_otg_hcd.h | 668 ++++++
+ drivers/usb/dwc_otg/dwc_otg_hcd_intr.c | 1873 +++++++++++++++
+ drivers/usb/dwc_otg/dwc_otg_hcd_queue.c | 684 ++++++
+ drivers/usb/dwc_otg/dwc_otg_pcd.c | 2523 ++++++++++++++++++++
+ drivers/usb/dwc_otg/dwc_otg_pcd.h | 248 ++
+ drivers/usb/dwc_otg/dwc_otg_pcd_intr.c | 3654 +++++++++++++++++++++++++++++
+ drivers/usb/dwc_otg/dwc_otg_regs.h | 2075 +++++++++++++++++
+ drivers/usb/dwc_otg/linux/dwc_otg_plat.h | 260 +++
+ 21 files changed, 24393 insertions(+)
+ create mode 100644 drivers/usb/dwc_otg/Kconfig
+ create mode 100644 drivers/usb/dwc_otg/Makefile
+ create mode 100644 drivers/usb/dwc_otg/dummy_audio.c
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_attr.c
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_attr.h
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_cil.c
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_cil.h
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_cil_intr.c
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_driver.c
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_driver.h
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_hcd.c
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_hcd.h
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_hcd_intr.c
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_hcd_queue.c
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_pcd.c
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_pcd.h
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_pcd_intr.c
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_regs.h
+ create mode 100644 drivers/usb/dwc_otg/linux/dwc_otg_plat.h
+
+diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
+index 2e6b832..45d766e 100644
+--- a/drivers/usb/Kconfig
++++ b/drivers/usb/Kconfig
+@@ -88,6 +88,8 @@ if USB
+
+ source "drivers/usb/core/Kconfig"
+
++source "drivers/usb/dwc_otg/Kconfig"
++
+ source "drivers/usb/mon/Kconfig"
+
+ source "drivers/usb/wusbcore/Kconfig"
+diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
+index aaa15d9..5205cf0 100644
+--- a/drivers/usb/Makefile
++++ b/drivers/usb/Makefile
+@@ -8,6 +8,7 @@ obj-$(CONFIG_USB) += core/
+
+ obj-$(CONFIG_USB_DWC3) += dwc3/
+ obj-$(CONFIG_USB_DWC2) += dwc2/
++obj-$(CONFIG_DWC_OTG) += dwc_otg/
+
+ obj-$(CONFIG_USB_MON) += mon/
+
+diff --git a/drivers/usb/dwc_otg/Kconfig b/drivers/usb/dwc_otg/Kconfig
+new file mode 100644
+index 0000000..6dd75f1
+--- /dev/null
++++ b/drivers/usb/dwc_otg/Kconfig
+@@ -0,0 +1,24 @@
++config DWC_OTG
++ tristate "Ralink RT305X DWC_OTG support"
++ depends on SOC_RT305X
++ ---help---
++ This driver supports Ralink DWC_OTG
++
++choice
++ prompt "USB Operation Mode"
++ depends on DWC_OTG
++ default DWC_OTG_HOST_ONLY
++
++config DWC_OTG_HOST_ONLY
++ bool "HOST ONLY MODE"
++ depends on DWC_OTG
++
++config DWC_OTG_DEVICE_ONLY
++ bool "DEVICE ONLY MODE"
++ depends on DWC_OTG
++
++endchoice
++
++config DWC_OTG_DEBUG
++ bool "Enable debug mode"
++ depends on DWC_OTG
+diff --git a/drivers/usb/dwc_otg/Makefile b/drivers/usb/dwc_otg/Makefile
+new file mode 100644
+index 0000000..95c5b66
+--- /dev/null
++++ b/drivers/usb/dwc_otg/Makefile
+@@ -0,0 +1,25 @@
++#
++# Makefile for DWC_otg Highspeed USB controller driver
++#
++
++ifeq ($(CONFIG_DWC_OTG_DEBUG),y)
++EXTRA_CFLAGS += -DDEBUG
++endif
++
++# Use one of the following flags to compile the software in host-only or
++# device-only mode.
++ifeq ($(CONFIG_DWC_OTG_HOST_ONLY),y)
++EXTRA_CFLAGS += -DDWC_HOST_ONLY
++EXTRA_CFLAGS += -DDWC_EN_ISOC
++endif
++
++ifeq ($(CONFIG_DWC_OTG_DEVICE_ONLY),y)
++EXTRA_CFLAGS += -DDWC_DEVICE_ONLY
++endif
++
++obj-$(CONFIG_DWC_OTG) := dwc_otg.o
++
++dwc_otg-objs := dwc_otg_driver.o dwc_otg_attr.o
++dwc_otg-objs += dwc_otg_cil.o dwc_otg_cil_intr.o
++dwc_otg-objs += dwc_otg_pcd.o dwc_otg_pcd_intr.o
++dwc_otg-objs += dwc_otg_hcd.o dwc_otg_hcd_intr.o dwc_otg_hcd_queue.o
+diff --git a/drivers/usb/dwc_otg/dummy_audio.c b/drivers/usb/dwc_otg/dummy_audio.c
+new file mode 100644
+index 0000000..225decf
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dummy_audio.c
+@@ -0,0 +1,1575 @@
++/*
++ * zero.c -- Gadget Zero, for USB development
++ *
++ * Copyright (C) 2003-2004 David Brownell
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ * notice, this list of conditions, and the following disclaimer,
++ * without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ * notice, this list of conditions and the following disclaimer in the
++ * documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ * to endorse or promote products derived from this software without
++ * specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") as published by the Free Software
++ * Foundation, either version 2 of that License or (at your option) any
++ * later version.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++
++/*
++ * Gadget Zero only needs two bulk endpoints, and is an example of how you
++ * can write a hardware-agnostic gadget driver running inside a USB device.
++ *
++ * Hardware details are visible (see CONFIG_USB_ZERO_* below) but don't
++ * affect most of the driver.
++ *
++ * Use it with the Linux host/master side "usbtest" driver to get a basic
++ * functional test of your device-side usb stack, or with "usb-skeleton".
++ *
++ * It supports two similar configurations. One sinks whatever the usb host
++ * writes, and in return sources zeroes. The other loops whatever the host
++ * writes back, so the host can read it. Module options include:
++ *
++ * buflen=N default N=4096, buffer size used
++ * qlen=N default N=32, how many buffers in the loopback queue
++ * loopdefault default false, list loopback config first
++ *
++ * Many drivers will only have one configuration, letting them be much
++ * simpler if they also don't support high speed operation (like this
++ * driver does).
++ */
++
++#include <linux/config.h>
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/delay.h>
++#include <linux/ioport.h>
++#include <linux/sched.h>
++#include <linux/slab.h>
++#include <linux/smp_lock.h>
++#include <linux/errno.h>
++#include <linux/init.h>
++#include <linux/timer.h>
++#include <linux/list.h>
++#include <linux/interrupt.h>
++#include <linux/uts.h>
++#include <linux/version.h>
++#include <linux/device.h>
++#include <linux/moduleparam.h>
++#include <linux/proc_fs.h>
++
++#include <asm/byteorder.h>
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <asm/system.h>
++#include <asm/unaligned.h>
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21)
++# include <linux/usb/ch9.h>
++#else
++# include <linux/usb_ch9.h>
++#endif
++
++#include <linux/usb_gadget.h>
++
++
++/*-------------------------------------------------------------------------*/
++/*-------------------------------------------------------------------------*/
++
++
++static int utf8_to_utf16le(const char *s, u16 *cp, unsigned len)
++{
++ int count = 0;
++ u8 c;
++ u16 uchar;
++
++ /* this insists on correct encodings, though not minimal ones.
++ * BUT it currently rejects legit 4-byte UTF-8 code points,
++ * which need surrogate pairs. (Unicode 3.1 can use them.)
++ */
++ while (len != 0 && (c = (u8) *s++) != 0) {
++ if (unlikely(c & 0x80)) {
++ // 2-byte sequence:
++ // 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx
++ if ((c & 0xe0) == 0xc0) {
++ uchar = (c & 0x1f) << 6;
++
++ c = (u8) *s++;
++ if ((c & 0xc0) != 0xc0)
++ goto fail;
++ c &= 0x3f;
++ uchar |= c;
++
++ // 3-byte sequence (most CJKV characters):
++ // zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx
++ } else if ((c & 0xf0) == 0xe0) {
++ uchar = (c & 0x0f) << 12;
++
++ c = (u8) *s++;
++ if ((c & 0xc0) != 0xc0)
++ goto fail;
++ c &= 0x3f;
++ uchar |= c << 6;
++
++ c = (u8) *s++;
++ if ((c & 0xc0) != 0xc0)
++ goto fail;
++ c &= 0x3f;
++ uchar |= c;
++
++ /* no bogus surrogates */
++ if (0xd800 <= uchar && uchar <= 0xdfff)
++ goto fail;
++
++ // 4-byte sequence (surrogate pairs, currently rare):
++ // 11101110wwwwzzzzyy + 110111yyyyxxxxxx
++ // = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx
++ // (uuuuu = wwww + 1)
++ // FIXME accept the surrogate code points (only)
++
++ } else
++ goto fail;
++ } else
++ uchar = c;
++ put_unaligned (cpu_to_le16 (uchar), cp++);
++ count++;
++ len--;
++ }
++ return count;
++fail:
++ return -1;
++}
++
++
++/**
++ * usb_gadget_get_string - fill out a string descriptor
++ * @table: of c strings encoded using UTF-8
++ * @id: string id, from low byte of wValue in get string descriptor
++ * @buf: at least 256 bytes
++ *
++ * Finds the UTF-8 string matching the ID, and converts it into a
++ * string descriptor in utf16-le.
++ * Returns length of descriptor (always even) or negative errno
++ *
++ * If your driver needs stings in multiple languages, you'll probably
++ * "switch (wIndex) { ... }" in your ep0 string descriptor logic,
++ * using this routine after choosing which set of UTF-8 strings to use.
++ * Note that US-ASCII is a strict subset of UTF-8; any string bytes with
++ * the eighth bit set will be multibyte UTF-8 characters, not ISO-8859/1
++ * characters (which are also widely used in C strings).
++ */
++int
++usb_gadget_get_string (struct usb_gadget_strings *table, int id, u8 *buf)
++{
++ struct usb_string *s;
++ int len;
++
++ /* descriptor 0 has the language id */
++ if (id == 0) {
++ buf [0] = 4;
++ buf [1] = USB_DT_STRING;
++ buf [2] = (u8) table->language;
++ buf [3] = (u8) (table->language >> 8);
++ return 4;
++ }
++ for (s = table->strings; s && s->s; s++)
++ if (s->id == id)
++ break;
++
++ /* unrecognized: stall. */
++ if (!s || !s->s)
++ return -EINVAL;
++
++ /* string descriptors have length, tag, then UTF16-LE text */
++ len = min ((size_t) 126, strlen (s->s));
++ memset (buf + 2, 0, 2 * len); /* zero all the bytes */
++ len = utf8_to_utf16le(s->s, (u16 *)&buf[2], len);
++ if (len < 0)
++ return -EINVAL;
++ buf [0] = (len + 1) * 2;
++ buf [1] = USB_DT_STRING;
++ return buf [0];
++}
++
++
++/*-------------------------------------------------------------------------*/
++/*-------------------------------------------------------------------------*/
++
++
++/**
++ * usb_descriptor_fillbuf - fill buffer with descriptors
++ * @buf: Buffer to be filled
++ * @buflen: Size of buf
++ * @src: Array of descriptor pointers, terminated by null pointer.
++ *
++ * Copies descriptors into the buffer, returning the length or a
++ * negative error code if they can't all be copied. Useful when
++ * assembling descriptors for an associated set of interfaces used
++ * as part of configuring a composite device; or in other cases where
++ * sets of descriptors need to be marshaled.
++ */
++int
++usb_descriptor_fillbuf(void *buf, unsigned buflen,
++ const struct usb_descriptor_header **src)
++{
++ u8 *dest = buf;
++
++ if (!src)
++ return -EINVAL;
++
++ /* fill buffer from src[] until null descriptor ptr */
++ for (; 0 != *src; src++) {
++ unsigned len = (*src)->bLength;
++
++ if (len > buflen)
++ return -EINVAL;
++ memcpy(dest, *src, len);
++ buflen -= len;
++ dest += len;
++ }
++ return dest - (u8 *)buf;
++}
++
++
++/**
++ * usb_gadget_config_buf - builts a complete configuration descriptor
++ * @config: Header for the descriptor, including characteristics such
++ * as power requirements and number of interfaces.
++ * @desc: Null-terminated vector of pointers to the descriptors (interface,
++ * endpoint, etc) defining all functions in this device configuration.
++ * @buf: Buffer for the resulting configuration descriptor.
++ * @length: Length of buffer. If this is not big enough to hold the
++ * entire configuration descriptor, an error code will be returned.
++ *
++ * This copies descriptors into the response buffer, building a descriptor
++ * for that configuration. It returns the buffer length or a negative
++ * status code. The config.wTotalLength field is set to match the length
++ * of the result, but other descriptor fields (including power usage and
++ * interface count) must be set by the caller.
++ *
++ * Gadget drivers could use this when constructing a config descriptor
++ * in response to USB_REQ_GET_DESCRIPTOR. They will need to patch the
++ * resulting bDescriptorType value if USB_DT_OTHER_SPEED_CONFIG is needed.
++ */
++int usb_gadget_config_buf(
++ const struct usb_config_descriptor *config,
++ void *buf,
++ unsigned length,
++ const struct usb_descriptor_header **desc
++)
++{
++ struct usb_config_descriptor *cp = buf;
++ int len;
++
++ /* config descriptor first */
++ if (length < USB_DT_CONFIG_SIZE || !desc)
++ return -EINVAL;
++ *cp = *config;
++
++ /* then interface/endpoint/class/vendor/... */
++ len = usb_descriptor_fillbuf(USB_DT_CONFIG_SIZE + (u8*)buf,
++ length - USB_DT_CONFIG_SIZE, desc);
++ if (len < 0)
++ return len;
++ len += USB_DT_CONFIG_SIZE;
++ if (len > 0xffff)
++ return -EINVAL;
++
++ /* patch up the config descriptor */
++ cp->bLength = USB_DT_CONFIG_SIZE;
++ cp->bDescriptorType = USB_DT_CONFIG;
++ cp->wTotalLength = cpu_to_le16(len);
++ cp->bmAttributes |= USB_CONFIG_ATT_ONE;
++ return len;
++}
++
++/*-------------------------------------------------------------------------*/
++/*-------------------------------------------------------------------------*/
++
++
++#define RBUF_LEN (1024*1024)
++static int rbuf_start;
++static int rbuf_len;
++static __u8 rbuf[RBUF_LEN];
++
++/*-------------------------------------------------------------------------*/
++
++#define DRIVER_VERSION "St Patrick's Day 2004"
++
++static const char shortname [] = "zero";
++static const char longname [] = "YAMAHA YST-MS35D USB Speaker ";
++
++static const char source_sink [] = "source and sink data";
++static const char loopback [] = "loop input to output";
++
++/*-------------------------------------------------------------------------*/
++
++/*
++ * driver assumes self-powered hardware, and
++ * has no way for users to trigger remote wakeup.
++ *
++ * this version autoconfigures as much as possible,
++ * which is reasonable for most "bulk-only" drivers.
++ */
++static const char *EP_IN_NAME; /* source */
++static const char *EP_OUT_NAME; /* sink */
++
++/*-------------------------------------------------------------------------*/
++
++/* big enough to hold our biggest descriptor */
++#define USB_BUFSIZ 512
++
++struct zero_dev {
++ spinlock_t lock;
++ struct usb_gadget *gadget;
++ struct usb_request *req; /* for control responses */
++
++ /* when configured, we have one of two configs:
++ * - source data (in to host) and sink it (out from host)
++ * - or loop it back (out from host back in to host)
++ */
++ u8 config;
++ struct usb_ep *in_ep, *out_ep;
++
++ /* autoresume timer */
++ struct timer_list resume;
++};
++
++#define xprintk(d,level,fmt,args...) \
++ dev_printk(level , &(d)->gadget->dev , fmt , ## args)
++
++#ifdef DEBUG
++#define DBG(dev,fmt,args...) \
++ xprintk(dev , KERN_DEBUG , fmt , ## args)
++#else
++#define DBG(dev,fmt,args...) \
++ do { } while (0)
++#endif /* DEBUG */
++
++#ifdef VERBOSE
++#define VDBG DBG
++#else
++#define VDBG(dev,fmt,args...) \
++ do { } while (0)
++#endif /* VERBOSE */
++
++#define ERROR(dev,fmt,args...) \
++ xprintk(dev , KERN_ERR , fmt , ## args)
++#define WARN(dev,fmt,args...) \
++ xprintk(dev , KERN_WARNING , fmt , ## args)
++#define INFO(dev,fmt,args...) \
++ xprintk(dev , KERN_INFO , fmt , ## args)
++
++/*-------------------------------------------------------------------------*/
++
++static unsigned buflen = 4096;
++static unsigned qlen = 32;
++static unsigned pattern = 0;
++
++module_param (buflen, uint, S_IRUGO|S_IWUSR);
++module_param (qlen, uint, S_IRUGO|S_IWUSR);
++module_param (pattern, uint, S_IRUGO|S_IWUSR);
++
++/*
++ * if it's nonzero, autoresume says how many seconds to wait
++ * before trying to wake up the host after suspend.
++ */
++static unsigned autoresume = 0;
++module_param (autoresume, uint, 0);
++
++/*
++ * Normally the "loopback" configuration is second (index 1) so
++ * it's not the default. Here's where to change that order, to
++ * work better with hosts where config changes are problematic.
++ * Or controllers (like superh) that only support one config.
++ */
++static int loopdefault = 0;
++
++module_param (loopdefault, bool, S_IRUGO|S_IWUSR);
++
++/*-------------------------------------------------------------------------*/
++
++/* Thanks to NetChip Technologies for donating this product ID.
++ *
++ * DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!!
++ * Instead: allocate your own, using normal USB-IF procedures.
++ */
++#ifndef CONFIG_USB_ZERO_HNPTEST
++#define DRIVER_VENDOR_NUM 0x0525 /* NetChip */
++#define DRIVER_PRODUCT_NUM 0xa4a0 /* Linux-USB "Gadget Zero" */
++#else
++#define DRIVER_VENDOR_NUM 0x1a0a /* OTG test device IDs */
++#define DRIVER_PRODUCT_NUM 0xbadd
++#endif
++
++/*-------------------------------------------------------------------------*/
++
++/*
++ * DESCRIPTORS ... most are static, but strings and (full)
++ * configuration descriptors are built on demand.
++ */
++
++/*
++#define STRING_MANUFACTURER 25
++#define STRING_PRODUCT 42
++#define STRING_SERIAL 101
++*/
++#define STRING_MANUFACTURER 1
++#define STRING_PRODUCT 2
++#define STRING_SERIAL 3
++
++#define STRING_SOURCE_SINK 250
++#define STRING_LOOPBACK 251
++
++/*
++ * This device advertises two configurations; these numbers work
++ * on a pxa250 as well as more flexible hardware.
++ */
++#define CONFIG_SOURCE_SINK 3
++#define CONFIG_LOOPBACK 2
++
++/*
++static struct usb_device_descriptor
++device_desc = {
++ .bLength = sizeof device_desc,
++ .bDescriptorType = USB_DT_DEVICE,
++
++ .bcdUSB = __constant_cpu_to_le16 (0x0200),
++ .bDeviceClass = USB_CLASS_VENDOR_SPEC,
++
++ .idVendor = __constant_cpu_to_le16 (DRIVER_VENDOR_NUM),
++ .idProduct = __constant_cpu_to_le16 (DRIVER_PRODUCT_NUM),
++ .iManufacturer = STRING_MANUFACTURER,
++ .iProduct = STRING_PRODUCT,
++ .iSerialNumber = STRING_SERIAL,
++ .bNumConfigurations = 2,
++};
++*/
++static struct usb_device_descriptor
++device_desc = {
++ .bLength = sizeof device_desc,
++ .bDescriptorType = USB_DT_DEVICE,
++ .bcdUSB = __constant_cpu_to_le16 (0x0100),
++ .bDeviceClass = USB_CLASS_PER_INTERFACE,
++ .bDeviceSubClass = 0,
++ .bDeviceProtocol = 0,
++ .bMaxPacketSize0 = 64,
++ .bcdDevice = __constant_cpu_to_le16 (0x0100),
++ .idVendor = __constant_cpu_to_le16 (0x0499),
++ .idProduct = __constant_cpu_to_le16 (0x3002),
++ .iManufacturer = STRING_MANUFACTURER,
++ .iProduct = STRING_PRODUCT,
++ .iSerialNumber = STRING_SERIAL,
++ .bNumConfigurations = 1,
++};
++
++static struct usb_config_descriptor
++z_config = {
++ .bLength = sizeof z_config,
++ .bDescriptorType = USB_DT_CONFIG,
++
++ /* compute wTotalLength on the fly */
++ .bNumInterfaces = 2,
++ .bConfigurationValue = 1,
++ .iConfiguration = 0,
++ .bmAttributes = 0x40,
++ .bMaxPower = 0, /* self-powered */
++};
++
++
++static struct usb_otg_descriptor
++otg_descriptor = {
++ .bLength = sizeof otg_descriptor,
++ .bDescriptorType = USB_DT_OTG,
++
++ .bmAttributes = USB_OTG_SRP,
++};
++
++/* one interface in each configuration */
++#ifdef CONFIG_USB_GADGET_DUALSPEED
++
++/*
++ * usb 2.0 devices need to expose both high speed and full speed
++ * descriptors, unless they only run at full speed.
++ *
++ * that means alternate endpoint descriptors (bigger packets)
++ * and a "device qualifier" ... plus more construction options
++ * for the config descriptor.
++ */
++
++static struct usb_qualifier_descriptor
++dev_qualifier = {
++ .bLength = sizeof dev_qualifier,
++ .bDescriptorType = USB_DT_DEVICE_QUALIFIER,
++
++ .bcdUSB = __constant_cpu_to_le16 (0x0200),
++ .bDeviceClass = USB_CLASS_VENDOR_SPEC,
++
++ .bNumConfigurations = 2,
++};
++
++
++struct usb_cs_as_general_descriptor {
++ __u8 bLength;
++ __u8 bDescriptorType;
++
++ __u8 bDescriptorSubType;
++ __u8 bTerminalLink;
++ __u8 bDelay;
++ __u16 wFormatTag;
++} __attribute__ ((packed));
++
++struct usb_cs_as_format_descriptor {
++ __u8 bLength;
++ __u8 bDescriptorType;
++
++ __u8 bDescriptorSubType;
++ __u8 bFormatType;
++ __u8 bNrChannels;
++ __u8 bSubframeSize;
++ __u8 bBitResolution;
++ __u8 bSamfreqType;
++ __u8 tLowerSamFreq[3];
++ __u8 tUpperSamFreq[3];
++} __attribute__ ((packed));
++
++static const struct usb_interface_descriptor
++z_audio_control_if_desc = {
++ .bLength = sizeof z_audio_control_if_desc,
++ .bDescriptorType = USB_DT_INTERFACE,
++ .bInterfaceNumber = 0,
++ .bAlternateSetting = 0,
++ .bNumEndpoints = 0,
++ .bInterfaceClass = USB_CLASS_AUDIO,
++ .bInterfaceSubClass = 0x1,
++ .bInterfaceProtocol = 0,
++ .iInterface = 0,
++};
++
++static const struct usb_interface_descriptor
++z_audio_if_desc = {
++ .bLength = sizeof z_audio_if_desc,
++ .bDescriptorType = USB_DT_INTERFACE,
++ .bInterfaceNumber = 1,
++ .bAlternateSetting = 0,
++ .bNumEndpoints = 0,
++ .bInterfaceClass = USB_CLASS_AUDIO,
++ .bInterfaceSubClass = 0x2,
++ .bInterfaceProtocol = 0,
++ .iInterface = 0,
++};
++
++static const struct usb_interface_descriptor
++z_audio_if_desc2 = {
++ .bLength = sizeof z_audio_if_desc,
++ .bDescriptorType = USB_DT_INTERFACE,
++ .bInterfaceNumber = 1,
++ .bAlternateSetting = 1,
++ .bNumEndpoints = 1,
++ .bInterfaceClass = USB_CLASS_AUDIO,
++ .bInterfaceSubClass = 0x2,
++ .bInterfaceProtocol = 0,
++ .iInterface = 0,
++};
++
++static const struct usb_cs_as_general_descriptor
++z_audio_cs_as_if_desc = {
++ .bLength = 7,
++ .bDescriptorType = 0x24,
++
++ .bDescriptorSubType = 0x01,
++ .bTerminalLink = 0x01,
++ .bDelay = 0x0,
++ .wFormatTag = __constant_cpu_to_le16 (0x0001)
++};
++
++
++static const struct usb_cs_as_format_descriptor
++z_audio_cs_as_format_desc = {
++ .bLength = 0xe,
++ .bDescriptorType = 0x24,
++
++ .bDescriptorSubType = 2,
++ .bFormatType = 1,
++ .bNrChannels = 1,
++ .bSubframeSize = 1,
++ .bBitResolution = 8,
++ .bSamfreqType = 0,
++ .tLowerSamFreq = {0x7e, 0x13, 0x00},
++ .tUpperSamFreq = {0xe2, 0xd6, 0x00},
++};
++
++static const struct usb_endpoint_descriptor
++z_iso_ep = {
++ .bLength = 0x09,
++ .bDescriptorType = 0x05,
++ .bEndpointAddress = 0x04,
++ .bmAttributes = 0x09,
++ .wMaxPacketSize = 0x0038,
++ .bInterval = 0x01,
++ .bRefresh = 0x00,
++ .bSynchAddress = 0x00,
++};
++
++static char z_iso_ep2[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
++
++// 9 bytes
++static char z_ac_interface_header_desc[] =
++{ 0x09, 0x24, 0x01, 0x00, 0x01, 0x2b, 0x00, 0x01, 0x01 };
++
++// 12 bytes
++static char z_0[] = {0x0c, 0x24, 0x02, 0x01, 0x01, 0x01, 0x00, 0x02,
++ 0x03, 0x00, 0x00, 0x00};
++// 13 bytes
++static char z_1[] = {0x0d, 0x24, 0x06, 0x02, 0x01, 0x02, 0x15, 0x00,
++ 0x02, 0x00, 0x02, 0x00, 0x00};
++// 9 bytes
++static char z_2[] = {0x09, 0x24, 0x03, 0x03, 0x01, 0x03, 0x00, 0x02,
++ 0x00};
++
++static char za_0[] = {0x09, 0x04, 0x01, 0x02, 0x01, 0x01, 0x02, 0x00,
++ 0x00};
++
++static char za_1[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00};
++
++static char za_2[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x01, 0x08, 0x00,
++ 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00};
++
++static char za_3[] = {0x09, 0x05, 0x04, 0x09, 0x70, 0x00, 0x01, 0x00,
++ 0x00};
++
++static char za_4[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
++
++static char za_5[] = {0x09, 0x04, 0x01, 0x03, 0x01, 0x01, 0x02, 0x00,
++ 0x00};
++
++static char za_6[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00};
++
++static char za_7[] = {0x0e, 0x24, 0x02, 0x01, 0x01, 0x02, 0x10, 0x00,
++ 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00};
++
++static char za_8[] = {0x09, 0x05, 0x04, 0x09, 0x70, 0x00, 0x01, 0x00,
++ 0x00};
++
++static char za_9[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
++
++static char za_10[] = {0x09, 0x04, 0x01, 0x04, 0x01, 0x01, 0x02, 0x00,
++ 0x00};
++
++static char za_11[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00};
++
++static char za_12[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x02, 0x10, 0x00,
++ 0x73, 0x13, 0x00, 0xe2, 0xd6, 0x00};
++
++static char za_13[] = {0x09, 0x05, 0x04, 0x09, 0xe0, 0x00, 0x01, 0x00,
++ 0x00};
++
++static char za_14[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
++
++static char za_15[] = {0x09, 0x04, 0x01, 0x05, 0x01, 0x01, 0x02, 0x00,
++ 0x00};
++
++static char za_16[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00};
++
++static char za_17[] = {0x0e, 0x24, 0x02, 0x01, 0x01, 0x03, 0x14, 0x00,
++ 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00};
++
++static char za_18[] = {0x09, 0x05, 0x04, 0x09, 0xa8, 0x00, 0x01, 0x00,
++ 0x00};
++
++static char za_19[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
++
++static char za_20[] = {0x09, 0x04, 0x01, 0x06, 0x01, 0x01, 0x02, 0x00,
++ 0x00};
++
++static char za_21[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00};
++
++static char za_22[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x03, 0x14, 0x00,
++ 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00};
++
++static char za_23[] = {0x09, 0x05, 0x04, 0x09, 0x50, 0x01, 0x01, 0x00,
++ 0x00};
++
++static char za_24[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
++
++
++
++static const struct usb_descriptor_header *z_function [] = {
++ (struct usb_descriptor_header *) &z_audio_control_if_desc,
++ (struct usb_descriptor_header *) &z_ac_interface_header_desc,
++ (struct usb_descriptor_header *) &z_0,
++ (struct usb_descriptor_header *) &z_1,
++ (struct usb_descriptor_header *) &z_2,
++ (struct usb_descriptor_header *) &z_audio_if_desc,
++ (struct usb_descriptor_header *) &z_audio_if_desc2,
++ (struct usb_descriptor_header *) &z_audio_cs_as_if_desc,
++ (struct usb_descriptor_header *) &z_audio_cs_as_format_desc,
++ (struct usb_descriptor_header *) &z_iso_ep,
++ (struct usb_descriptor_header *) &z_iso_ep2,
++ (struct usb_descriptor_header *) &za_0,
++ (struct usb_descriptor_header *) &za_1,
++ (struct usb_descriptor_header *) &za_2,
++ (struct usb_descriptor_header *) &za_3,
++ (struct usb_descriptor_header *) &za_4,
++ (struct usb_descriptor_header *) &za_5,
++ (struct usb_descriptor_header *) &za_6,
++ (struct usb_descriptor_header *) &za_7,
++ (struct usb_descriptor_header *) &za_8,
++ (struct usb_descriptor_header *) &za_9,
++ (struct usb_descriptor_header *) &za_10,
++ (struct usb_descriptor_header *) &za_11,
++ (struct usb_descriptor_header *) &za_12,
++ (struct usb_descriptor_header *) &za_13,
++ (struct usb_descriptor_header *) &za_14,
++ (struct usb_descriptor_header *) &za_15,
++ (struct usb_descriptor_header *) &za_16,
++ (struct usb_descriptor_header *) &za_17,
++ (struct usb_descriptor_header *) &za_18,
++ (struct usb_descriptor_header *) &za_19,
++ (struct usb_descriptor_header *) &za_20,
++ (struct usb_descriptor_header *) &za_21,
++ (struct usb_descriptor_header *) &za_22,
++ (struct usb_descriptor_header *) &za_23,
++ (struct usb_descriptor_header *) &za_24,
++ NULL,
++};
++
++/* maxpacket and other transfer characteristics vary by speed. */
++#define ep_desc(g,hs,fs) (((g)->speed==USB_SPEED_HIGH)?(hs):(fs))
++
++#else
++
++/* if there's no high speed support, maxpacket doesn't change. */
++#define ep_desc(g,hs,fs) fs
++
++#endif /* !CONFIG_USB_GADGET_DUALSPEED */
++
++static char manufacturer [40];
++//static char serial [40];
++static char serial [] = "Ser 00 em";
++
++/* static strings, in UTF-8 */
++static struct usb_string strings [] = {
++ { STRING_MANUFACTURER, manufacturer, },
++ { STRING_PRODUCT, longname, },
++ { STRING_SERIAL, serial, },
++ { STRING_LOOPBACK, loopback, },
++ { STRING_SOURCE_SINK, source_sink, },
++ { } /* end of list */
++};
++
++static struct usb_gadget_strings stringtab = {
++ .language = 0x0409, /* en-us */
++ .strings = strings,
++};
++
++/*
++ * config descriptors are also handcrafted. these must agree with code
++ * that sets configurations, and with code managing interfaces and their
++ * altsettings. other complexity may come from:
++ *
++ * - high speed support, including "other speed config" rules
++ * - multiple configurations
++ * - interfaces with alternate settings
++ * - embedded class or vendor-specific descriptors
++ *
++ * this handles high speed, and has a second config that could as easily
++ * have been an alternate interface setting (on most hardware).
++ *
++ * NOTE: to demonstrate (and test) more USB capabilities, this driver
++ * should include an altsetting to test interrupt transfers, including
++ * high bandwidth modes at high speed. (Maybe work like Intel's test
++ * device?)
++ */
++static int
++config_buf (struct usb_gadget *gadget, u8 *buf, u8 type, unsigned index)
++{
++ int len;
++ const struct usb_descriptor_header **function;
++
++ function = z_function;
++ len = usb_gadget_config_buf (&z_config, buf, USB_BUFSIZ, function);
++ if (len < 0)
++ return len;
++ ((struct usb_config_descriptor *) buf)->bDescriptorType = type;
++ return len;
++}
++
++/*-------------------------------------------------------------------------*/
++
++static struct usb_request *
++alloc_ep_req (struct usb_ep *ep, unsigned length)
++{
++ struct usb_request *req;
++
++ req = usb_ep_alloc_request (ep, GFP_ATOMIC);
++ if (req) {
++ req->length = length;
++ req->buf = usb_ep_alloc_buffer (ep, length,
++ &req->dma, GFP_ATOMIC);
++ if (!req->buf) {
++ usb_ep_free_request (ep, req);
++ req = NULL;
++ }
++ }
++ return req;
++}
++
++static void free_ep_req (struct usb_ep *ep, struct usb_request *req)
++{
++ if (req->buf)
++ usb_ep_free_buffer (ep, req->buf, req->dma, req->length);
++ usb_ep_free_request (ep, req);
++}
++
++/*-------------------------------------------------------------------------*/
++
++/* optionally require specific source/sink data patterns */
++
++static int
++check_read_data (
++ struct zero_dev *dev,
++ struct usb_ep *ep,
++ struct usb_request *req
++)
++{
++ unsigned i;
++ u8 *buf = req->buf;
++
++ for (i = 0; i < req->actual; i++, buf++) {
++ switch (pattern) {
++ /* all-zeroes has no synchronization issues */
++ case 0:
++ if (*buf == 0)
++ continue;
++ break;
++ /* mod63 stays in sync with short-terminated transfers,
++ * or otherwise when host and gadget agree on how large
++ * each usb transfer request should be. resync is done
++ * with set_interface or set_config.
++ */
++ case 1:
++ if (*buf == (u8)(i % 63))
++ continue;
++ break;
++ }
++ ERROR (dev, "bad OUT byte, buf [%d] = %d\n", i, *buf);
++ usb_ep_set_halt (ep);
++ return -EINVAL;
++ }
++ return 0;
++}
++
++/*-------------------------------------------------------------------------*/
++
++static void zero_reset_config (struct zero_dev *dev)
++{
++ if (dev->config == 0)
++ return;
++
++ DBG (dev, "reset config\n");
++
++ /* just disable endpoints, forcing completion of pending i/o.
++ * all our completion handlers free their requests in this case.
++ */
++ if (dev->in_ep) {
++ usb_ep_disable (dev->in_ep);
++ dev->in_ep = NULL;
++ }
++ if (dev->out_ep) {
++ usb_ep_disable (dev->out_ep);
++ dev->out_ep = NULL;
++ }
++ dev->config = 0;
++ del_timer (&dev->resume);
++}
++
++#define _write(f, buf, sz) (f->f_op->write(f, buf, sz, &f->f_pos))
++
++static void
++zero_isoc_complete (struct usb_ep *ep, struct usb_request *req)
++{
++ struct zero_dev *dev = ep->driver_data;
++ int status = req->status;
++ int i, j;
++
++ switch (status) {
++
++ case 0: /* normal completion? */
++ //printk ("\nzero ---------------> isoc normal completion %d bytes\n", req->actual);
++ for (i=0, j=rbuf_start; i<req->actual; i++) {
++ //printk ("%02x ", ((__u8*)req->buf)[i]);
++ rbuf[j] = ((__u8*)req->buf)[i];
++ j++;
++ if (j >= RBUF_LEN) j=0;
++ }
++ rbuf_start = j;
++ //printk ("\n\n");
++
++ if (rbuf_len < RBUF_LEN) {
++ rbuf_len += req->actual;
++ if (rbuf_len > RBUF_LEN) {
++ rbuf_len = RBUF_LEN;
++ }
++ }
++
++ break;
++
++ /* this endpoint is normally active while we're configured */
++ case -ECONNABORTED: /* hardware forced ep reset */
++ case -ECONNRESET: /* request dequeued */
++ case -ESHUTDOWN: /* disconnect from host */
++ VDBG (dev, "%s gone (%d), %d/%d\n", ep->name, status,
++ req->actual, req->length);
++ if (ep == dev->out_ep)
++ check_read_data (dev, ep, req);
++ free_ep_req (ep, req);
++ return;
++
++ case -EOVERFLOW: /* buffer overrun on read means that
++ * we didn't provide a big enough
++ * buffer.
++ */
++ default:
++#if 1
++ DBG (dev, "%s complete --> %d, %d/%d\n", ep->name,
++ status, req->actual, req->length);
++#endif
++ case -EREMOTEIO: /* short read */
++ break;
++ }
++
++ status = usb_ep_queue (ep, req, GFP_ATOMIC);
++ if (status) {
++ ERROR (dev, "kill %s: resubmit %d bytes --> %d\n",
++ ep->name, req->length, status);
++ usb_ep_set_halt (ep);
++ /* FIXME recover later ... somehow */
++ }
++}
++
++static struct usb_request *
++zero_start_isoc_ep (struct usb_ep *ep, int gfp_flags)
++{
++ struct usb_request *req;
++ int status;
++
++ req = alloc_ep_req (ep, 512);
++ if (!req)
++ return NULL;
++
++ req->complete = zero_isoc_complete;
++
++ status = usb_ep_queue (ep, req, gfp_flags);
++ if (status) {
++ struct zero_dev *dev = ep->driver_data;
++
++ ERROR (dev, "start %s --> %d\n", ep->name, status);
++ free_ep_req (ep, req);
++ req = NULL;
++ }
++
++ return req;
++}
++
++/* change our operational config. this code must agree with the code
++ * that returns config descriptors, and altsetting code.
++ *
++ * it's also responsible for power management interactions. some
++ * configurations might not work with our current power sources.
++ *
++ * note that some device controller hardware will constrain what this
++ * code can do, perhaps by disallowing more than one configuration or
++ * by limiting configuration choices (like the pxa2xx).
++ */
++static int
++zero_set_config (struct zero_dev *dev, unsigned number, int gfp_flags)
++{
++ int result = 0;
++ struct usb_gadget *gadget = dev->gadget;
++ const struct usb_endpoint_descriptor *d;
++ struct usb_ep *ep;
++
++ if (number == dev->config)
++ return 0;
++
++ zero_reset_config (dev);
++
++ gadget_for_each_ep (ep, gadget) {
++
++ if (strcmp (ep->name, "ep4") == 0) {
++
++ d = (struct usb_endpoint_descripter *)&za_23; // isoc ep desc for audio i/f alt setting 6
++ result = usb_ep_enable (ep, d);
++
++ if (result == 0) {
++ ep->driver_data = dev;
++ dev->in_ep = ep;
++
++ if (zero_start_isoc_ep (ep, gfp_flags) != 0) {
++
++ dev->in_ep = ep;
++ continue;
++ }
++
++ usb_ep_disable (ep);
++ result = -EIO;
++ }
++ }
++
++ }
++
++ dev->config = number;
++ return result;
++}
++
++/*-------------------------------------------------------------------------*/
++
++static void zero_setup_complete (struct usb_ep *ep, struct usb_request *req)
++{
++ if (req->status || req->actual != req->length)
++ DBG ((struct zero_dev *) ep->driver_data,
++ "setup complete --> %d, %d/%d\n",
++ req->status, req->actual, req->length);
++}
++
++/*
++ * The setup() callback implements all the ep0 functionality that's
++ * not handled lower down, in hardware or the hardware driver (like
++ * device and endpoint feature flags, and their status). It's all
++ * housekeeping for the gadget function we're implementing. Most of
++ * the work is in config-specific setup.
++ */
++static int
++zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
++{
++ struct zero_dev *dev = get_gadget_data (gadget);
++ struct usb_request *req = dev->req;
++ int value = -EOPNOTSUPP;
++
++ /* usually this stores reply data in the pre-allocated ep0 buffer,
++ * but config change events will reconfigure hardware.
++ */
++ req->zero = 0;
++ switch (ctrl->bRequest) {
++
++ case USB_REQ_GET_DESCRIPTOR:
++
++ switch (ctrl->wValue >> 8) {
++
++ case USB_DT_DEVICE:
++ value = min (ctrl->wLength, (u16) sizeof device_desc);
++ memcpy (req->buf, &device_desc, value);
++ break;
++#ifdef CONFIG_USB_GADGET_DUALSPEED
++ case USB_DT_DEVICE_QUALIFIER:
++ if (!gadget->is_dualspeed)
++ break;
++ value = min (ctrl->wLength, (u16) sizeof dev_qualifier);
++ memcpy (req->buf, &dev_qualifier, value);
++ break;
++
++ case USB_DT_OTHER_SPEED_CONFIG:
++ if (!gadget->is_dualspeed)
++ break;
++ // FALLTHROUGH
++#endif /* CONFIG_USB_GADGET_DUALSPEED */
++ case USB_DT_CONFIG:
++ value = config_buf (gadget, req->buf,
++ ctrl->wValue >> 8,
++ ctrl->wValue & 0xff);
++ if (value >= 0)
++ value = min (ctrl->wLength, (u16) value);
++ break;
++
++ case USB_DT_STRING:
++ /* wIndex == language code.
++ * this driver only handles one language, you can
++ * add string tables for other languages, using
++ * any UTF-8 characters
++ */
++ value = usb_gadget_get_string (&stringtab,
++ ctrl->wValue & 0xff, req->buf);
++ if (value >= 0) {
++ value = min (ctrl->wLength, (u16) value);
++ }
++ break;
++ }
++ break;
++
++ /* currently two configs, two speeds */
++ case USB_REQ_SET_CONFIGURATION:
++ if (ctrl->bRequestType != 0)
++ goto unknown;
++
++ spin_lock (&dev->lock);
++ value = zero_set_config (dev, ctrl->wValue, GFP_ATOMIC);
++ spin_unlock (&dev->lock);
++ break;
++ case USB_REQ_GET_CONFIGURATION:
++ if (ctrl->bRequestType != USB_DIR_IN)
++ goto unknown;
++ *(u8 *)req->buf = dev->config;
++ value = min (ctrl->wLength, (u16) 1);
++ break;
++
++ /* until we add altsetting support, or other interfaces,
++ * only 0/0 are possible. pxa2xx only supports 0/0 (poorly)
++ * and already killed pending endpoint I/O.
++ */
++ case USB_REQ_SET_INTERFACE:
++
++ if (ctrl->bRequestType != USB_RECIP_INTERFACE)
++ goto unknown;
++ spin_lock (&dev->lock);
++ if (dev->config) {
++ u8 config = dev->config;
++
++ /* resets interface configuration, forgets about
++ * previous transaction state (queued bufs, etc)
++ * and re-inits endpoint state (toggle etc)
++ * no response queued, just zero status == success.
++ * if we had more than one interface we couldn't
++ * use this "reset the config" shortcut.
++ */
++ zero_reset_config (dev);
++ zero_set_config (dev, config, GFP_ATOMIC);
++ value = 0;
++ }
++ spin_unlock (&dev->lock);
++ break;
++ case USB_REQ_GET_INTERFACE:
++ if ((ctrl->bRequestType == 0x21) && (ctrl->wIndex == 0x02)) {
++ value = ctrl->wLength;
++ break;
++ }
++ else {
++ if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE))
++ goto unknown;
++ if (!dev->config)
++ break;
++ if (ctrl->wIndex != 0) {
++ value = -EDOM;
++ break;
++ }
++ *(u8 *)req->buf = 0;
++ value = min (ctrl->wLength, (u16) 1);
++ }
++ break;
++
++ /*
++ * These are the same vendor-specific requests supported by
++ * Intel's USB 2.0 compliance test devices. We exceed that
++ * device spec by allowing multiple-packet requests.
++ */
++ case 0x5b: /* control WRITE test -- fill the buffer */
++ if (ctrl->bRequestType != (USB_DIR_OUT|USB_TYPE_VENDOR))
++ goto unknown;
++ if (ctrl->wValue || ctrl->wIndex)
++ break;
++ /* just read that many bytes into the buffer */
++ if (ctrl->wLength > USB_BUFSIZ)
++ break;
++ value = ctrl->wLength;
++ break;
++ case 0x5c: /* control READ test -- return the buffer */
++ if (ctrl->bRequestType != (USB_DIR_IN|USB_TYPE_VENDOR))
++ goto unknown;
++ if (ctrl->wValue || ctrl->wIndex)
++ break;
++ /* expect those bytes are still in the buffer; send back */
++ if (ctrl->wLength > USB_BUFSIZ
++ || ctrl->wLength != req->length)
++ break;
++ value = ctrl->wLength;
++ break;
++
++ case 0x01: // SET_CUR
++ case 0x02:
++ case 0x03:
++ case 0x04:
++ case 0x05:
++ value = ctrl->wLength;
++ break;
++ case 0x81:
++ switch (ctrl->wValue) {
++ case 0x0201:
++ case 0x0202:
++ ((u8*)req->buf)[0] = 0x00;
++ ((u8*)req->buf)[1] = 0xe3;
++ break;
++ case 0x0300:
++ case 0x0500:
++ ((u8*)req->buf)[0] = 0x00;
++ break;
++ }
++ //((u8*)req->buf)[0] = 0x81;
++ //((u8*)req->buf)[1] = 0x81;
++ value = ctrl->wLength;
++ break;
++ case 0x82:
++ switch (ctrl->wValue) {
++ case 0x0201:
++ case 0x0202:
++ ((u8*)req->buf)[0] = 0x00;
++ ((u8*)req->buf)[1] = 0xc3;
++ break;
++ case 0x0300:
++ case 0x0500:
++ ((u8*)req->buf)[0] = 0x00;
++ break;
++ }
++ //((u8*)req->buf)[0] = 0x82;
++ //((u8*)req->buf)[1] = 0x82;
++ value = ctrl->wLength;
++ break;
++ case 0x83:
++ switch (ctrl->wValue) {
++ case 0x0201:
++ case 0x0202:
++ ((u8*)req->buf)[0] = 0x00;
++ ((u8*)req->buf)[1] = 0x00;
++ break;
++ case 0x0300:
++ ((u8*)req->buf)[0] = 0x60;
++ break;
++ case 0x0500:
++ ((u8*)req->buf)[0] = 0x18;
++ break;
++ }
++ //((u8*)req->buf)[0] = 0x83;
++ //((u8*)req->buf)[1] = 0x83;
++ value = ctrl->wLength;
++ break;
++ case 0x84:
++ switch (ctrl->wValue) {
++ case 0x0201:
++ case 0x0202:
++ ((u8*)req->buf)[0] = 0x00;
++ ((u8*)req->buf)[1] = 0x01;
++ break;
++ case 0x0300:
++ case 0x0500:
++ ((u8*)req->buf)[0] = 0x08;
++ break;
++ }
++ //((u8*)req->buf)[0] = 0x84;
++ //((u8*)req->buf)[1] = 0x84;
++ value = ctrl->wLength;
++ break;
++ case 0x85:
++ ((u8*)req->buf)[0] = 0x85;
++ ((u8*)req->buf)[1] = 0x85;
++ value = ctrl->wLength;
++ break;
++
++
++ default:
++unknown:
++ printk("unknown control req%02x.%02x v%04x i%04x l%d\n",
++ ctrl->bRequestType, ctrl->bRequest,
++ ctrl->wValue, ctrl->wIndex, ctrl->wLength);
++ }
++
++ /* respond with data transfer before status phase? */
++ if (value >= 0) {
++ req->length = value;
++ req->zero = value < ctrl->wLength
++ && (value % gadget->ep0->maxpacket) == 0;
++ value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC);
++ if (value < 0) {
++ DBG (dev, "ep_queue < 0 --> %d\n", value);
++ req->status = 0;
++ zero_setup_complete (gadget->ep0, req);
++ }
++ }
++
++ /* device either stalls (value < 0) or reports success */
++ return value;
++}
++
++static void
++zero_disconnect (struct usb_gadget *gadget)
++{
++ struct zero_dev *dev = get_gadget_data (gadget);
++ unsigned long flags;
++
++ spin_lock_irqsave (&dev->lock, flags);
++ zero_reset_config (dev);
++
++ /* a more significant application might have some non-usb
++ * activities to quiesce here, saving resources like power
++ * or pushing the notification up a network stack.
++ */
++ spin_unlock_irqrestore (&dev->lock, flags);
++
++ /* next we may get setup() calls to enumerate new connections;
++ * or an unbind() during shutdown (including removing module).
++ */
++}
++
++static void
++zero_autoresume (unsigned long _dev)
++{
++ struct zero_dev *dev = (struct zero_dev *) _dev;
++ int status;
++
++ /* normally the host would be woken up for something
++ * more significant than just a timer firing...
++ */
++ if (dev->gadget->speed != USB_SPEED_UNKNOWN) {
++ status = usb_gadget_wakeup (dev->gadget);
++ DBG (dev, "wakeup --> %d\n", status);
++ }
++}
++
++/*-------------------------------------------------------------------------*/
++
++static void
++zero_unbind (struct usb_gadget *gadget)
++{
++ struct zero_dev *dev = get_gadget_data (gadget);
++
++ DBG (dev, "unbind\n");
++
++ /* we've already been disconnected ... no i/o is active */
++ if (dev->req)
++ free_ep_req (gadget->ep0, dev->req);
++ del_timer_sync (&dev->resume);
++ kfree (dev);
++ set_gadget_data (gadget, NULL);
++}
++
++static int
++zero_bind (struct usb_gadget *gadget)
++{
++ struct zero_dev *dev;
++ //struct usb_ep *ep;
++
++ printk("binding\n");
++ /*
++ * DRIVER POLICY CHOICE: you may want to do this differently.
++ * One thing to avoid is reusing a bcdDevice revision code
++ * with different host-visible configurations or behavior
++ * restrictions -- using ep1in/ep2out vs ep1out/ep3in, etc
++ */
++ //device_desc.bcdDevice = __constant_cpu_to_le16 (0x0201);
++
++
++ /* ok, we made sense of the hardware ... */
++ dev = kmalloc (sizeof *dev, SLAB_KERNEL);
++ if (!dev)
++ return -ENOMEM;
++ memset (dev, 0, sizeof *dev);
++ spin_lock_init (&dev->lock);
++ dev->gadget = gadget;
++ set_gadget_data (gadget, dev);
++
++ /* preallocate control response and buffer */
++ dev->req = usb_ep_alloc_request (gadget->ep0, GFP_KERNEL);
++ if (!dev->req)
++ goto enomem;
++ dev->req->buf = usb_ep_alloc_buffer (gadget->ep0, USB_BUFSIZ,
++ &dev->req->dma, GFP_KERNEL);
++ if (!dev->req->buf)
++ goto enomem;
++
++ dev->req->complete = zero_setup_complete;
++
++ device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
++
++#ifdef CONFIG_USB_GADGET_DUALSPEED
++ /* assume ep0 uses the same value for both speeds ... */
++ dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0;
++
++ /* and that all endpoints are dual-speed */
++ //hs_source_desc.bEndpointAddress = fs_source_desc.bEndpointAddress;
++ //hs_sink_desc.bEndpointAddress = fs_sink_desc.bEndpointAddress;
++#endif
++
++ usb_gadget_set_selfpowered (gadget);
++
++ init_timer (&dev->resume);
++ dev->resume.function = zero_autoresume;
++ dev->resume.data = (unsigned long) dev;
++
++ gadget->ep0->driver_data = dev;
++
++ INFO (dev, "%s, version: " DRIVER_VERSION "\n", longname);
++ INFO (dev, "using %s, OUT %s IN %s\n", gadget->name,
++ EP_OUT_NAME, EP_IN_NAME);
++
++ snprintf (manufacturer, sizeof manufacturer,
++ UTS_SYSNAME " " UTS_RELEASE " with %s",
++ gadget->name);
++
++ return 0;
++
++enomem:
++ zero_unbind (gadget);
++ return -ENOMEM;
++}
++
++/*-------------------------------------------------------------------------*/
++
++static void
++zero_suspend (struct usb_gadget *gadget)
++{
++ struct zero_dev *dev = get_gadget_data (gadget);
++
++ if (gadget->speed == USB_SPEED_UNKNOWN)
++ return;
++
++ if (autoresume) {
++ mod_timer (&dev->resume, jiffies + (HZ * autoresume));
++ DBG (dev, "suspend, wakeup in %d seconds\n", autoresume);
++ } else
++ DBG (dev, "suspend\n");
++}
++
++static void
++zero_resume (struct usb_gadget *gadget)
++{
++ struct zero_dev *dev = get_gadget_data (gadget);
++
++ DBG (dev, "resume\n");
++ del_timer (&dev->resume);
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++static struct usb_gadget_driver zero_driver = {
++#ifdef CONFIG_USB_GADGET_DUALSPEED
++ .speed = USB_SPEED_HIGH,
++#else
++ .speed = USB_SPEED_FULL,
++#endif
++ .function = (char *) longname,
++ .bind = zero_bind,
++ .unbind = zero_unbind,
++
++ .setup = zero_setup,
++ .disconnect = zero_disconnect,
++
++ .suspend = zero_suspend,
++ .resume = zero_resume,
++
++ .driver = {
++ .name = (char *) shortname,
++ // .shutdown = ...
++ // .suspend = ...
++ // .resume = ...
++ },
++};
++
++MODULE_AUTHOR ("David Brownell");
++MODULE_LICENSE ("Dual BSD/GPL");
++
++static struct proc_dir_entry *pdir, *pfile;
++
++static int isoc_read_data (char *page, char **start,
++ off_t off, int count,
++ int *eof, void *data)
++{
++ int i;
++ static int c = 0;
++ static int done = 0;
++ static int s = 0;
++
++/*
++ printk ("\ncount: %d\n", count);
++ printk ("rbuf_start: %d\n", rbuf_start);
++ printk ("rbuf_len: %d\n", rbuf_len);
++ printk ("off: %d\n", off);
++ printk ("start: %p\n\n", *start);
++*/
++ if (done) {
++ c = 0;
++ done = 0;
++ *eof = 1;
++ return 0;
++ }
++
++ if (c == 0) {
++ if (rbuf_len == RBUF_LEN)
++ s = rbuf_start;
++ else s = 0;
++ }
++
++ for (i=0; i<count && c<rbuf_len; i++, c++) {
++ page[i] = rbuf[(c+s) % RBUF_LEN];
++ }
++ *start = page;
++
++ if (c >= rbuf_len) {
++ *eof = 1;
++ done = 1;
++ }
++
++
++ return i;
++}
++
++static int __init init (void)
++{
++
++ int retval = 0;
++
++ pdir = proc_mkdir("isoc_test", NULL);
++ if(pdir == NULL) {
++ retval = -ENOMEM;
++ printk("Error creating dir\n");
++ goto done;
++ }
++ pdir->owner = THIS_MODULE;
++
++ pfile = create_proc_read_entry("isoc_data",
++ 0444, pdir,
++ isoc_read_data,
++ NULL);
++ if (pfile == NULL) {
++ retval = -ENOMEM;
++ printk("Error creating file\n");
++ goto no_file;
++ }
++ pfile->owner = THIS_MODULE;
++
++ return usb_gadget_register_driver (&zero_driver);
++
++ no_file:
++ remove_proc_entry("isoc_data", NULL);
++ done:
++ return retval;
++}
++module_init (init);
++
++static void __exit cleanup (void)
++{
++
++ usb_gadget_unregister_driver (&zero_driver);
++
++ remove_proc_entry("isoc_data", pdir);
++ remove_proc_entry("isoc_test", NULL);
++}
++module_exit (cleanup);
+diff --git a/drivers/usb/dwc_otg/dwc_otg_attr.c b/drivers/usb/dwc_otg/dwc_otg_attr.c
+new file mode 100644
+index 0000000..8543537
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_attr.c
+@@ -0,0 +1,966 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_attr.c $
++ * $Revision: 1.2 $
++ * $Date: 2008-11-21 05:39:15 $
++ * $Change: 1064918 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++/** @file
++ *
++ * The diagnostic interface will provide access to the controller for
++ * bringing up the hardware and testing. The Linux driver attributes
++ * feature will be used to provide the Linux Diagnostic
++ * Interface. These attributes are accessed through sysfs.
++ */
++
++/** @page "Linux Module Attributes"
++ *
++ * The Linux module attributes feature is used to provide the Linux
++ * Diagnostic Interface. These attributes are accessed through sysfs.
++ * The diagnostic interface will provide access to the controller for
++ * bringing up the hardware and testing.
++
++
++ The following table shows the attributes.
++ <table>
++ <tr>
++ <td><b> Name</b></td>
++ <td><b> Description</b></td>
++ <td><b> Access</b></td>
++ </tr>
++
++ <tr>
++ <td> mode </td>
++ <td> Returns the current mode: 0 for device mode, 1 for host mode</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> hnpcapable </td>
++ <td> Gets or sets the "HNP-capable" bit in the Core USB Configuraton Register.
++ Read returns the current value.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> srpcapable </td>
++ <td> Gets or sets the "SRP-capable" bit in the Core USB Configuraton Register.
++ Read returns the current value.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> hnp </td>
++ <td> Initiates the Host Negotiation Protocol. Read returns the status.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> srp </td>
++ <td> Initiates the Session Request Protocol. Read returns the status.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> buspower </td>
++ <td> Gets or sets the Power State of the bus (0 - Off or 1 - On)</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> bussuspend </td>
++ <td> Suspends the USB bus.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> busconnected </td>
++ <td> Gets the connection status of the bus</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> gotgctl </td>
++ <td> Gets or sets the Core Control Status Register.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> gusbcfg </td>
++ <td> Gets or sets the Core USB Configuration Register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> grxfsiz </td>
++ <td> Gets or sets the Receive FIFO Size Register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> gnptxfsiz </td>
++ <td> Gets or sets the non-periodic Transmit Size Register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> gpvndctl </td>
++ <td> Gets or sets the PHY Vendor Control Register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> ggpio </td>
++ <td> Gets the value in the lower 16-bits of the General Purpose IO Register
++ or sets the upper 16 bits.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> guid </td>
++ <td> Gets or sets the value of the User ID Register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> gsnpsid </td>
++ <td> Gets the value of the Synopsys ID Regester</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> devspeed </td>
++ <td> Gets or sets the device speed setting in the DCFG register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> enumspeed </td>
++ <td> Gets the device enumeration Speed.</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> hptxfsiz </td>
++ <td> Gets the value of the Host Periodic Transmit FIFO</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> hprt0 </td>
++ <td> Gets or sets the value in the Host Port Control and Status Register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> regoffset </td>
++ <td> Sets the register offset for the next Register Access</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> regvalue </td>
++ <td> Gets or sets the value of the register at the offset in the regoffset attribute.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> remote_wakeup </td>
++ <td> On read, shows the status of Remote Wakeup. On write, initiates a remote
++ wakeup of the host. When bit 0 is 1 and Remote Wakeup is enabled, the Remote
++ Wakeup signalling bit in the Device Control Register is set for 1
++ milli-second.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> regdump </td>
++ <td> Dumps the contents of core registers.</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> spramdump </td>
++ <td> Dumps the contents of core registers.</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> hcddump </td>
++ <td> Dumps the current HCD state.</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> hcd_frrem </td>
++ <td> Shows the average value of the Frame Remaining
++ field in the Host Frame Number/Frame Remaining register when an SOF interrupt
++ occurs. This can be used to determine the average interrupt latency. Also
++ shows the average Frame Remaining value for start_transfer and the "a" and
++ "b" sample points. The "a" and "b" sample points may be used during debugging
++ bto determine how long it takes to execute a section of the HCD code.</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> rd_reg_test </td>
++ <td> Displays the time required to read the GNPTXFSIZ register many times
++ (the output shows the number of times the register is read).
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> wr_reg_test </td>
++ <td> Displays the time required to write the GNPTXFSIZ register many times
++ (the output shows the number of times the register is written).
++ <td> Read</td>
++ </tr>
++
++ </table>
++
++ Example usage:
++ To get the current mode:
++ cat /sys/devices/lm0/mode
++
++ To power down the USB:
++ echo 0 > /sys/devices/lm0/buspower
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/errno.h>
++#include <linux/types.h>
++#include <linux/stat.h> /* permission constants */
++#include <linux/version.h>
++
++#include <asm/io.h>
++
++#include "linux/dwc_otg_plat.h"
++#include "dwc_otg_attr.h"
++#include "dwc_otg_driver.h"
++#include "dwc_otg_pcd.h"
++#include "dwc_otg_hcd.h"
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++/*
++ * MACROs for defining sysfs attribute
++ */
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
++{ \
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \
++ uint32_t val; \
++ val = dwc_read_reg32 (_addr_); \
++ val = (val & (_mask_)) >> _shift_; \
++ return sprintf (buf, "%s = 0x%x\n", _string_, val); \
++}
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \
++ const char *buf, size_t count) \
++{ \
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \
++ uint32_t set = simple_strtoul(buf, NULL, 16); \
++ uint32_t clear = set; \
++ clear = ((~clear) << _shift_) & _mask_; \
++ set = (set << _shift_) & _mask_; \
++ dev_dbg(_dev, "Storing Address=0x%08x Set=0x%08x Clear=0x%08x\n", (uint32_t)_addr_, set, clear); \
++ dwc_modify_reg32(_addr_, clear, set); \
++ return count; \
++}
++
++/*
++ * MACROs for defining sysfs attribute for 32-bit registers
++ */
++#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \
++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
++{ \
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \
++ uint32_t val; \
++ val = dwc_read_reg32 (_addr_); \
++ return sprintf (buf, "%s = 0x%08x\n", _string_, val); \
++}
++#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_addr_,_string_) \
++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \
++ const char *buf, size_t count) \
++{ \
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \
++ uint32_t val = simple_strtoul(buf, NULL, 16); \
++ dev_dbg(_dev, "Storing Address=0x%08x Val=0x%08x\n", (uint32_t)_addr_, val); \
++ dwc_write_reg32(_addr_, val); \
++ return count; \
++}
++
++#else
++
++/*
++ * MACROs for defining sysfs attribute
++ */
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
++static ssize_t _otg_attr_name_##_show (struct device *_dev, char *buf) \
++{ \
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\
++ uint32_t val; \
++ val = dwc_read_reg32 (_addr_); \
++ val = (val & (_mask_)) >> _shift_; \
++ return sprintf (buf, "%s = 0x%x\n", _string_, val); \
++}
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
++static ssize_t _otg_attr_name_##_store (struct device *_dev, const char *buf, size_t count) \
++{ \
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\
++ uint32_t set = simple_strtoul(buf, NULL, 16); \
++ uint32_t clear = set; \
++ clear = ((~clear) << _shift_) & _mask_; \
++ set = (set << _shift_) & _mask_; \
++ dev_dbg(_dev, "Storing Address=0x%08x Set=0x%08x Clear=0x%08x\n", (uint32_t)_addr_, set, clear); \
++ dwc_modify_reg32(_addr_, clear, set); \
++ return count; \
++}
++
++/*
++ * MACROs for defining sysfs attribute for 32-bit registers
++ */
++#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \
++static ssize_t _otg_attr_name_##_show (struct device *_dev, char *buf) \
++{ \
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\
++ uint32_t val; \
++ val = dwc_read_reg32 (_addr_); \
++ return sprintf (buf, "%s = 0x%08x\n", _string_, val); \
++}
++#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_addr_,_string_) \
++static ssize_t _otg_attr_name_##_store (struct device *_dev, const char *buf, size_t count) \
++{ \
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\
++ uint32_t val = simple_strtoul(buf, NULL, 16); \
++ dev_dbg(_dev, "Storing Address=0x%08x Val=0x%08x\n", (uint32_t)_addr_, val); \
++ dwc_write_reg32(_addr_, val); \
++ return count; \
++}
++
++#endif
++
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_RW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
++DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
++DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
++DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store);
++
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_RO(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
++DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
++DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL);
++
++#define DWC_OTG_DEVICE_ATTR_REG32_RW(_otg_attr_name_,_addr_,_string_) \
++DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \
++DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_addr_,_string_) \
++DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store);
++
++#define DWC_OTG_DEVICE_ATTR_REG32_RO(_otg_attr_name_,_addr_,_string_) \
++DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \
++DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL);
++
++
++/** @name Functions for Show/Store of Attributes */
++/**@{*/
++
++/**
++ * Show the register offset of the Register Access.
++ */
++static ssize_t regoffset_show( struct device *_dev,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ struct device_attribute *attr,
++#endif
++ char *buf)
++{
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++ return snprintf(buf, sizeof("0xFFFFFFFF\n")+1,"0x%08x\n", otg_dev->reg_offset);
++}
++
++/**
++ * Set the register offset for the next Register Access Read/Write
++ */
++static ssize_t regoffset_store( struct device *_dev,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ struct device_attribute *attr,
++#endif
++ const char *buf,
++ size_t count )
++{
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++
++ uint32_t offset = simple_strtoul(buf, NULL, 16);
++ //dev_dbg(_dev, "Offset=0x%08x\n", offset);
++ if (offset < 0x00040000 ) {
++ otg_dev->reg_offset = offset;
++ }
++ else {
++ dev_err( _dev, "invalid offset\n" );
++ }
++
++ return count;
++}
++DEVICE_ATTR(regoffset, S_IRUGO|S_IWUSR, (void *)regoffset_show, regoffset_store);
++
++
++/**
++ * Show the value of the register at the offset in the reg_offset
++ * attribute.
++ */
++static ssize_t regvalue_show( struct device *_dev,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ struct device_attribute *attr,
++#endif
++ char *buf)
++{
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++
++ uint32_t val;
++ volatile uint32_t *addr;
++
++ if (otg_dev->reg_offset != 0xFFFFFFFF &&
++ 0 != otg_dev->base) {
++ /* Calculate the address */
++ addr = (uint32_t*)(otg_dev->reg_offset +
++ (uint8_t*)otg_dev->base);
++ //dev_dbg(_dev, "@0x%08x\n", (unsigned)addr);
++ val = dwc_read_reg32( addr );
++ return snprintf(buf, sizeof("Reg@0xFFFFFFFF = 0xFFFFFFFF\n")+1,
++ "Reg@0x%06x = 0x%08x\n",
++ otg_dev->reg_offset, val);
++ }
++ else {
++ dev_err(_dev, "Invalid offset (0x%0x)\n",
++ otg_dev->reg_offset);
++ return sprintf(buf, "invalid offset\n" );
++ }
++}
++
++/**
++ * Store the value in the register at the offset in the reg_offset
++ * attribute.
++ *
++ */
++static ssize_t regvalue_store( struct device *_dev,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ struct device_attribute *attr,
++#endif
++ const char *buf,
++ size_t count )
++{
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++
++ volatile uint32_t * addr;
++ uint32_t val = simple_strtoul(buf, NULL, 16);
++ //dev_dbg(_dev, "Offset=0x%08x Val=0x%08x\n", otg_dev->reg_offset, val);
++ if (otg_dev->reg_offset != 0xFFFFFFFF && 0 != otg_dev->base) {
++ /* Calculate the address */
++ addr = (uint32_t*)(otg_dev->reg_offset +
++ (uint8_t*)otg_dev->base);
++ //dev_dbg(_dev, "@0x%08x\n", (unsigned)addr);
++ dwc_write_reg32( addr, val );
++ }
++ else {
++ dev_err(_dev, "Invalid Register Offset (0x%08x)\n",
++ otg_dev->reg_offset);
++ }
++ return count;
++}
++DEVICE_ATTR(regvalue, S_IRUGO|S_IWUSR, regvalue_show, regvalue_store);
++
++/*
++ * Attributes
++ */
++DWC_OTG_DEVICE_ATTR_BITFIELD_RO(mode,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<20),20,"Mode");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(hnpcapable,&(otg_dev->core_if->core_global_regs->gusbcfg),(1<<9),9,"Mode");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(srpcapable,&(otg_dev->core_if->core_global_regs->gusbcfg),(1<<8),8,"Mode");
++
++//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(buspower,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode");
++//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(bussuspend,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RO(busconnected,otg_dev->core_if->host_if->hprt0,0x01,0,"Bus Connected");
++
++DWC_OTG_DEVICE_ATTR_REG32_RW(gotgctl,&(otg_dev->core_if->core_global_regs->gotgctl),"GOTGCTL");
++DWC_OTG_DEVICE_ATTR_REG32_RW(gusbcfg,&(otg_dev->core_if->core_global_regs->gusbcfg),"GUSBCFG");
++DWC_OTG_DEVICE_ATTR_REG32_RW(grxfsiz,&(otg_dev->core_if->core_global_regs->grxfsiz),"GRXFSIZ");
++DWC_OTG_DEVICE_ATTR_REG32_RW(gnptxfsiz,&(otg_dev->core_if->core_global_regs->gnptxfsiz),"GNPTXFSIZ");
++DWC_OTG_DEVICE_ATTR_REG32_RW(gpvndctl,&(otg_dev->core_if->core_global_regs->gpvndctl),"GPVNDCTL");
++DWC_OTG_DEVICE_ATTR_REG32_RW(ggpio,&(otg_dev->core_if->core_global_regs->ggpio),"GGPIO");
++DWC_OTG_DEVICE_ATTR_REG32_RW(guid,&(otg_dev->core_if->core_global_regs->guid),"GUID");
++DWC_OTG_DEVICE_ATTR_REG32_RO(gsnpsid,&(otg_dev->core_if->core_global_regs->gsnpsid),"GSNPSID");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(devspeed,&(otg_dev->core_if->dev_if->dev_global_regs->dcfg),0x3,0,"Device Speed");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RO(enumspeed,&(otg_dev->core_if->dev_if->dev_global_regs->dsts),0x6,1,"Device Enumeration Speed");
++
++DWC_OTG_DEVICE_ATTR_REG32_RO(hptxfsiz,&(otg_dev->core_if->core_global_regs->hptxfsiz),"HPTXFSIZ");
++DWC_OTG_DEVICE_ATTR_REG32_RW(hprt0,otg_dev->core_if->host_if->hprt0,"HPRT0");
++
++
++/**
++ * @todo Add code to initiate the HNP.
++ */
++/**
++ * Show the HNP status bit
++ */
++static ssize_t hnp_show( struct device *_dev,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ struct device_attribute *attr,
++#endif
++ char *buf)
++{
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++
++ gotgctl_data_t val;
++ val.d32 = dwc_read_reg32 (&(otg_dev->core_if->core_global_regs->gotgctl));
++ return sprintf (buf, "HstNegScs = 0x%x\n", val.b.hstnegscs);
++}
++
++/**
++ * Set the HNP Request bit
++ */
++static ssize_t hnp_store( struct device *_dev,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ struct device_attribute *attr,
++#endif
++ const char *buf,
++ size_t count )
++{
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++
++ uint32_t in = simple_strtoul(buf, NULL, 16);
++ uint32_t *addr = (uint32_t *)&(otg_dev->core_if->core_global_regs->gotgctl);
++ gotgctl_data_t mem;
++ mem.d32 = dwc_read_reg32(addr);
++ mem.b.hnpreq = in;
++ dev_dbg(_dev, "Storing Address=0x%08x Data=0x%08x\n", (uint32_t)addr, mem.d32);
++ dwc_write_reg32(addr, mem.d32);
++ return count;
++}
++DEVICE_ATTR(hnp, 0644, hnp_show, hnp_store);
++
++/**
++ * @todo Add code to initiate the SRP.
++ */
++/**
++ * Show the SRP status bit
++ */
++static ssize_t srp_show( struct device *_dev,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ struct device_attribute *attr,
++#endif
++ char *buf)
++{
++#ifndef DWC_HOST_ONLY
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++
++ gotgctl_data_t val;
++ val.d32 = dwc_read_reg32 (&(otg_dev->core_if->core_global_regs->gotgctl));
++ return sprintf (buf, "SesReqScs = 0x%x\n", val.b.sesreqscs);
++#else
++ return sprintf(buf, "Host Only Mode!\n");
++#endif
++}
++
++
++
++/**
++ * Set the SRP Request bit
++ */
++static ssize_t srp_store( struct device *_dev,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ struct device_attribute *attr,
++#endif
++ const char *buf,
++ size_t count )
++{
++#ifndef DWC_HOST_ONLY
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++
++ dwc_otg_pcd_initiate_srp(otg_dev->pcd);
++#endif
++ return count;
++}
++DEVICE_ATTR(srp, 0644, srp_show, srp_store);
++
++/**
++ * @todo Need to do more for power on/off?
++ */
++/**
++ * Show the Bus Power status
++ */
++static ssize_t buspower_show( struct device *_dev,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ struct device_attribute *attr,
++#endif
++ char *buf)
++{
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++
++ hprt0_data_t val;
++ val.d32 = dwc_read_reg32 (otg_dev->core_if->host_if->hprt0);
++ return sprintf (buf, "Bus Power = 0x%x\n", val.b.prtpwr);
++}
++
++
++/**
++ * Set the Bus Power status
++ */
++static ssize_t buspower_store( struct device *_dev,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ struct device_attribute *attr,
++#endif
++ const char *buf,
++ size_t count )
++{
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++
++ uint32_t on = simple_strtoul(buf, NULL, 16);
++ uint32_t *addr = (uint32_t *)otg_dev->core_if->host_if->hprt0;
++ hprt0_data_t mem;
++
++ mem.d32 = dwc_read_reg32(addr);
++ mem.b.prtpwr = on;
++
++ //dev_dbg(_dev, "Storing Address=0x%08x Data=0x%08x\n", (uint32_t)addr, mem.d32);
++ dwc_write_reg32(addr, mem.d32);
++
++ return count;
++}
++DEVICE_ATTR(buspower, 0644, buspower_show, buspower_store);
++
++/**
++ * @todo Need to do more for suspend?
++ */
++/**
++ * Show the Bus Suspend status
++ */
++static ssize_t bussuspend_show( struct device *_dev,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ struct device_attribute *attr,
++#endif
++ char *buf)
++{
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++
++ hprt0_data_t val;
++ val.d32 = dwc_read_reg32 (otg_dev->core_if->host_if->hprt0);
++ return sprintf (buf, "Bus Suspend = 0x%x\n", val.b.prtsusp);
++}
++
++/**
++ * Set the Bus Suspend status
++ */
++static ssize_t bussuspend_store( struct device *_dev,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ struct device_attribute *attr,
++#endif
++ const char *buf,
++ size_t count )
++{
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++
++ uint32_t in = simple_strtoul(buf, NULL, 16);
++ uint32_t *addr = (uint32_t *)otg_dev->core_if->host_if->hprt0;
++ hprt0_data_t mem;
++ mem.d32 = dwc_read_reg32(addr);
++ mem.b.prtsusp = in;
++ dev_dbg(_dev, "Storing Address=0x%08x Data=0x%08x\n", (uint32_t)addr, mem.d32);
++ dwc_write_reg32(addr, mem.d32);
++ return count;
++}
++DEVICE_ATTR(bussuspend, 0644, bussuspend_show, bussuspend_store);
++
++/**
++ * Show the status of Remote Wakeup.
++ */
++static ssize_t remote_wakeup_show( struct device *_dev,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ struct device_attribute *attr,
++#endif
++ char *buf)
++{
++#ifndef DWC_HOST_ONLY
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++
++ dctl_data_t val;
++ val.d32 =
++ dwc_read_reg32( &otg_dev->core_if->dev_if->dev_global_regs->dctl);
++ return sprintf( buf, "Remote Wakeup = %d Enabled = %d\n",
++ val.b.rmtwkupsig, otg_dev->pcd->remote_wakeup_enable);
++#else
++ return sprintf(buf, "Host Only Mode!\n");
++#endif
++}
++/**
++ * Initiate a remote wakeup of the host. The Device control register
++ * Remote Wakeup Signal bit is written if the PCD Remote wakeup enable
++ * flag is set.
++ *
++ */
++static ssize_t remote_wakeup_store( struct device *_dev,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ struct device_attribute *attr,
++#endif
++ const char *buf,
++ size_t count )
++{
++#ifndef DWC_HOST_ONLY
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++
++ uint32_t val = simple_strtoul(buf, NULL, 16);
++ if (val&1) {
++ dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 1);
++ }
++ else {
++ dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 0);
++ }
++#endif
++ return count;
++}
++DEVICE_ATTR(remote_wakeup, S_IRUGO|S_IWUSR, remote_wakeup_show,
++ remote_wakeup_store);
++
++/**
++ * Dump global registers and either host or device registers (depending on the
++ * current mode of the core).
++ */
++static ssize_t regdump_show( struct device *_dev,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ struct device_attribute *attr,
++#endif
++ char *buf)
++{
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++
++ dwc_otg_dump_global_registers( otg_dev->core_if);
++ if (dwc_otg_is_host_mode(otg_dev->core_if)) {
++ dwc_otg_dump_host_registers( otg_dev->core_if);
++ } else {
++ dwc_otg_dump_dev_registers( otg_dev->core_if);
++
++ }
++ return sprintf( buf, "Register Dump\n" );
++}
++
++DEVICE_ATTR(regdump, S_IRUGO|S_IWUSR, regdump_show, 0);
++
++/**
++ * Dump global registers and either host or device registers (depending on the
++ * current mode of the core).
++ */
++static ssize_t spramdump_show( struct device *_dev,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ struct device_attribute *attr,
++#endif
++ char *buf)
++{
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++
++ dwc_otg_dump_spram( otg_dev->core_if);
++
++ return sprintf( buf, "SPRAM Dump\n" );
++}
++
++DEVICE_ATTR(spramdump, S_IRUGO|S_IWUSR, spramdump_show, 0);
++
++/**
++ * Dump the current hcd state.
++ */
++static ssize_t hcddump_show( struct device *_dev,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ struct device_attribute *attr,
++#endif
++ char *buf)
++{
++#ifndef DWC_DEVICE_ONLY
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++
++ dwc_otg_hcd_dump_state(otg_dev->hcd);
++#endif
++ return sprintf( buf, "HCD Dump\n" );
++}
++
++DEVICE_ATTR(hcddump, S_IRUGO|S_IWUSR, hcddump_show, 0);
++
++/**
++ * Dump the average frame remaining at SOF. This can be used to
++ * determine average interrupt latency. Frame remaining is also shown for
++ * start transfer and two additional sample points.
++ */
++static ssize_t hcd_frrem_show( struct device *_dev,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ struct device_attribute *attr,
++#endif
++ char *buf)
++{
++#ifndef DWC_DEVICE_ONLY
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++
++ dwc_otg_hcd_dump_frrem(otg_dev->hcd);
++#endif
++ return sprintf( buf, "HCD Dump Frame Remaining\n" );
++}
++
++DEVICE_ATTR(hcd_frrem, S_IRUGO|S_IWUSR, hcd_frrem_show, 0);
++
++/**
++ * Displays the time required to read the GNPTXFSIZ register many times (the
++ * output shows the number of times the register is read).
++ */
++#define RW_REG_COUNT 10000000
++#define MSEC_PER_JIFFIE 1000/HZ
++static ssize_t rd_reg_test_show( struct device *_dev,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ struct device_attribute *attr,
++#endif
++ char *buf)
++{
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++
++ int i;
++ int time;
++ int start_jiffies;
++
++ printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n",
++ HZ, MSEC_PER_JIFFIE, loops_per_jiffy);
++ start_jiffies = jiffies;
++ for (i = 0; i < RW_REG_COUNT; i++) {
++ dwc_read_reg32(&otg_dev->core_if->core_global_regs->gnptxfsiz);
++ }
++ time = jiffies - start_jiffies;
++ return sprintf( buf, "Time to read GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n",
++ RW_REG_COUNT, time * MSEC_PER_JIFFIE, time );
++}
++
++DEVICE_ATTR(rd_reg_test, S_IRUGO|S_IWUSR, rd_reg_test_show, 0);
++
++/**
++ * Displays the time required to write the GNPTXFSIZ register many times (the
++ * output shows the number of times the register is written).
++ */
++static ssize_t wr_reg_test_show( struct device *_dev,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ struct device_attribute *attr,
++#endif
++ char *buf)
++{
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++
++ uint32_t reg_val;
++ int i;
++ int time;
++ int start_jiffies;
++
++ printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n",
++ HZ, MSEC_PER_JIFFIE, loops_per_jiffy);
++ reg_val = dwc_read_reg32(&otg_dev->core_if->core_global_regs->gnptxfsiz);
++ start_jiffies = jiffies;
++ for (i = 0; i < RW_REG_COUNT; i++) {
++ dwc_write_reg32(&otg_dev->core_if->core_global_regs->gnptxfsiz, reg_val);
++ }
++ time = jiffies - start_jiffies;
++ return sprintf( buf, "Time to write GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n",
++ RW_REG_COUNT, time * MSEC_PER_JIFFIE, time);
++}
++
++DEVICE_ATTR(wr_reg_test, S_IRUGO|S_IWUSR, wr_reg_test_show, 0);
++/**@}*/
++
++/**
++ * Create the device files
++ */
++void dwc_otg_attr_create (struct device *dev)
++{
++ int error;
++
++ error = device_create_file(dev, &dev_attr_regoffset);
++ error = device_create_file(dev, &dev_attr_regvalue);
++ error = device_create_file(dev, &dev_attr_mode);
++ error = device_create_file(dev, &dev_attr_hnpcapable);
++ error = device_create_file(dev, &dev_attr_srpcapable);
++ error = device_create_file(dev, &dev_attr_hnp);
++ error = device_create_file(dev, &dev_attr_srp);
++ error = device_create_file(dev, &dev_attr_buspower);
++ error = device_create_file(dev, &dev_attr_bussuspend);
++ error = device_create_file(dev, &dev_attr_busconnected);
++ error = device_create_file(dev, &dev_attr_gotgctl);
++ error = device_create_file(dev, &dev_attr_gusbcfg);
++ error = device_create_file(dev, &dev_attr_grxfsiz);
++ error = device_create_file(dev, &dev_attr_gnptxfsiz);
++ error = device_create_file(dev, &dev_attr_gpvndctl);
++ error = device_create_file(dev, &dev_attr_ggpio);
++ error = device_create_file(dev, &dev_attr_guid);
++ error = device_create_file(dev, &dev_attr_gsnpsid);
++ error = device_create_file(dev, &dev_attr_devspeed);
++ error = device_create_file(dev, &dev_attr_enumspeed);
++ error = device_create_file(dev, &dev_attr_hptxfsiz);
++ error = device_create_file(dev, &dev_attr_hprt0);
++ error = device_create_file(dev, &dev_attr_remote_wakeup);
++ error = device_create_file(dev, &dev_attr_regdump);
++ error = device_create_file(dev, &dev_attr_spramdump);
++ error = device_create_file(dev, &dev_attr_hcddump);
++ error = device_create_file(dev, &dev_attr_hcd_frrem);
++ error = device_create_file(dev, &dev_attr_rd_reg_test);
++ error = device_create_file(dev, &dev_attr_wr_reg_test);
++}
++
++/**
++ * Remove the device files
++ */
++void dwc_otg_attr_remove (struct device *dev)
++{
++ device_remove_file(dev, &dev_attr_regoffset);
++ device_remove_file(dev, &dev_attr_regvalue);
++ device_remove_file(dev, &dev_attr_mode);
++ device_remove_file(dev, &dev_attr_hnpcapable);
++ device_remove_file(dev, &dev_attr_srpcapable);
++ device_remove_file(dev, &dev_attr_hnp);
++ device_remove_file(dev, &dev_attr_srp);
++ device_remove_file(dev, &dev_attr_buspower);
++ device_remove_file(dev, &dev_attr_bussuspend);
++ device_remove_file(dev, &dev_attr_busconnected);
++ device_remove_file(dev, &dev_attr_gotgctl);
++ device_remove_file(dev, &dev_attr_gusbcfg);
++ device_remove_file(dev, &dev_attr_grxfsiz);
++ device_remove_file(dev, &dev_attr_gnptxfsiz);
++ device_remove_file(dev, &dev_attr_gpvndctl);
++ device_remove_file(dev, &dev_attr_ggpio);
++ device_remove_file(dev, &dev_attr_guid);
++ device_remove_file(dev, &dev_attr_gsnpsid);
++ device_remove_file(dev, &dev_attr_devspeed);
++ device_remove_file(dev, &dev_attr_enumspeed);
++ device_remove_file(dev, &dev_attr_hptxfsiz);
++ device_remove_file(dev, &dev_attr_hprt0);
++ device_remove_file(dev, &dev_attr_remote_wakeup);
++ device_remove_file(dev, &dev_attr_regdump);
++ device_remove_file(dev, &dev_attr_spramdump);
++ device_remove_file(dev, &dev_attr_hcddump);
++ device_remove_file(dev, &dev_attr_hcd_frrem);
++ device_remove_file(dev, &dev_attr_rd_reg_test);
++ device_remove_file(dev, &dev_attr_wr_reg_test);
++}
+diff --git a/drivers/usb/dwc_otg/dwc_otg_attr.h b/drivers/usb/dwc_otg/dwc_otg_attr.h
+new file mode 100644
+index 0000000..0862b27
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_attr.h
+@@ -0,0 +1,67 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_attr.h $
++ * $Revision: 1.2 $
++ * $Date: 2008-11-21 05:39:15 $
++ * $Change: 477051 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#if !defined(__DWC_OTG_ATTR_H__)
++#define __DWC_OTG_ATTR_H__
++
++/** @file
++ * This file contains the interface to the Linux device attributes.
++ */
++extern struct device_attribute dev_attr_regoffset;
++extern struct device_attribute dev_attr_regvalue;
++
++extern struct device_attribute dev_attr_mode;
++extern struct device_attribute dev_attr_hnpcapable;
++extern struct device_attribute dev_attr_srpcapable;
++extern struct device_attribute dev_attr_hnp;
++extern struct device_attribute dev_attr_srp;
++extern struct device_attribute dev_attr_buspower;
++extern struct device_attribute dev_attr_bussuspend;
++extern struct device_attribute dev_attr_busconnected;
++extern struct device_attribute dev_attr_gotgctl;
++extern struct device_attribute dev_attr_gusbcfg;
++extern struct device_attribute dev_attr_grxfsiz;
++extern struct device_attribute dev_attr_gnptxfsiz;
++extern struct device_attribute dev_attr_gpvndctl;
++extern struct device_attribute dev_attr_ggpio;
++extern struct device_attribute dev_attr_guid;
++extern struct device_attribute dev_attr_gsnpsid;
++extern struct device_attribute dev_attr_devspeed;
++extern struct device_attribute dev_attr_enumspeed;
++extern struct device_attribute dev_attr_hptxfsiz;
++extern struct device_attribute dev_attr_hprt0;
++
++void dwc_otg_attr_create (struct device *dev);
++void dwc_otg_attr_remove (struct device *dev);
++
++#endif
+diff --git a/drivers/usb/dwc_otg/dwc_otg_cil.c b/drivers/usb/dwc_otg/dwc_otg_cil.c
+new file mode 100644
+index 0000000..89aa83e
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_cil.c
+@@ -0,0 +1,3692 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil.c $
++ * $Revision: 1.7 $
++ * $Date: 2008-12-22 11:43:05 $
++ * $Change: 1117667 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++/** @file
++ *
++ * The Core Interface Layer provides basic services for accessing and
++ * managing the DWC_otg hardware. These services are used by both the
++ * Host Controller Driver and the Peripheral Controller Driver.
++ *
++ * The CIL manages the memory map for the core so that the HCD and PCD
++ * don't have to do this separately. It also handles basic tasks like
++ * reading/writing the registers and data FIFOs in the controller.
++ * Some of the data access functions provide encapsulation of several
++ * operations required to perform a task, such as writing multiple
++ * registers to start a transfer. Finally, the CIL performs basic
++ * services that are not specific to either the host or device modes
++ * of operation. These services include management of the OTG Host
++ * Negotiation Protocol (HNP) and Session Request Protocol (SRP). A
++ * Diagnostic API is also provided to allow testing of the controller
++ * hardware.
++ *
++ * The Core Interface Layer has the following requirements:
++ * - Provides basic controller operations.
++ * - Minimal use of OS services.
++ * - The OS services used will be abstracted by using inline functions
++ * or macros.
++ *
++ */
++#include <asm/unaligned.h>
++#include <linux/dma-mapping.h>
++#ifdef DEBUG
++#include <linux/jiffies.h>
++#endif
++
++#include "linux/dwc_otg_plat.h"
++#include "dwc_otg_regs.h"
++#include "dwc_otg_cil.h"
++
++/* Included only to access hc->qh for non-dword buffer handling
++ * TODO: account it
++ */
++#include "dwc_otg_hcd.h"
++
++/**
++ * This function is called to initialize the DWC_otg CSR data
++ * structures. The register addresses in the device and host
++ * structures are initialized from the base address supplied by the
++ * caller. The calling function must make the OS calls to get the
++ * base address of the DWC_otg controller registers. The core_params
++ * argument holds the parameters that specify how the core should be
++ * configured.
++ *
++ * @param[in] reg_base_addr Base address of DWC_otg core registers
++ * @param[in] core_params Pointer to the core configuration parameters
++ *
++ */
++dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t *reg_base_addr,
++ dwc_otg_core_params_t *core_params)
++{
++ dwc_otg_core_if_t *core_if = 0;
++ dwc_otg_dev_if_t *dev_if = 0;
++ dwc_otg_host_if_t *host_if = 0;
++ uint8_t *reg_base = (uint8_t *)reg_base_addr;
++ int i = 0;
++
++ DWC_DEBUGPL(DBG_CILV, "%s(%p,%p)\n", __func__, reg_base_addr, core_params);
++
++ core_if = kmalloc(sizeof(dwc_otg_core_if_t), GFP_KERNEL);
++
++ if (core_if == 0) {
++ DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_core_if_t failed\n");
++ return 0;
++ }
++
++ memset(core_if, 0, sizeof(dwc_otg_core_if_t));
++
++ core_if->core_params = core_params;
++ core_if->core_global_regs = (dwc_otg_core_global_regs_t *)reg_base;
++
++ /*
++ * Allocate the Device Mode structures.
++ */
++ dev_if = kmalloc(sizeof(dwc_otg_dev_if_t), GFP_KERNEL);
++
++ if (dev_if == 0) {
++ DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_dev_if_t failed\n");
++ kfree(core_if);
++ return 0;
++ }
++
++ dev_if->dev_global_regs =
++ (dwc_otg_device_global_regs_t *)(reg_base + DWC_DEV_GLOBAL_REG_OFFSET);
++
++ for (i=0; i<MAX_EPS_CHANNELS; i++)
++ {
++ dev_if->in_ep_regs[i] = (dwc_otg_dev_in_ep_regs_t *)
++ (reg_base + DWC_DEV_IN_EP_REG_OFFSET +
++ (i * DWC_EP_REG_OFFSET));
++
++ dev_if->out_ep_regs[i] = (dwc_otg_dev_out_ep_regs_t *)
++ (reg_base + DWC_DEV_OUT_EP_REG_OFFSET +
++ (i * DWC_EP_REG_OFFSET));
++ DWC_DEBUGPL(DBG_CILV, "in_ep_regs[%d]->diepctl=%p\n",
++ i, &dev_if->in_ep_regs[i]->diepctl);
++ DWC_DEBUGPL(DBG_CILV, "out_ep_regs[%d]->doepctl=%p\n",
++ i, &dev_if->out_ep_regs[i]->doepctl);
++ }
++
++ dev_if->speed = 0; // unknown
++
++ core_if->dev_if = dev_if;
++
++ /*
++ * Allocate the Host Mode structures.
++ */
++ host_if = kmalloc(sizeof(dwc_otg_host_if_t), GFP_KERNEL);
++
++ if (host_if == 0) {
++ DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_host_if_t failed\n");
++ kfree(dev_if);
++ kfree(core_if);
++ return 0;
++ }
++
++ host_if->host_global_regs = (dwc_otg_host_global_regs_t *)
++ (reg_base + DWC_OTG_HOST_GLOBAL_REG_OFFSET);
++
++ host_if->hprt0 = (uint32_t*)(reg_base + DWC_OTG_HOST_PORT_REGS_OFFSET);
++
++ for (i=0; i<MAX_EPS_CHANNELS; i++)
++ {
++ host_if->hc_regs[i] = (dwc_otg_hc_regs_t *)
++ (reg_base + DWC_OTG_HOST_CHAN_REGS_OFFSET +
++ (i * DWC_OTG_CHAN_REGS_OFFSET));
++ DWC_DEBUGPL(DBG_CILV, "hc_reg[%d]->hcchar=%p\n",
++ i, &host_if->hc_regs[i]->hcchar);
++ }
++
++ host_if->num_host_channels = MAX_EPS_CHANNELS;
++ core_if->host_if = host_if;
++
++ for (i=0; i<MAX_EPS_CHANNELS; i++)
++ {
++ core_if->data_fifo[i] =
++ (uint32_t *)(reg_base + DWC_OTG_DATA_FIFO_OFFSET +
++ (i * DWC_OTG_DATA_FIFO_SIZE));
++ DWC_DEBUGPL(DBG_CILV, "data_fifo[%d]=0x%08x\n",
++ i, (unsigned)core_if->data_fifo[i]);
++ }
++
++ core_if->pcgcctl = (uint32_t*)(reg_base + DWC_OTG_PCGCCTL_OFFSET);
++
++ /*
++ * Store the contents of the hardware configuration registers here for
++ * easy access later.
++ */
++ core_if->hwcfg1.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg1);
++ core_if->hwcfg2.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg2);
++ core_if->hwcfg3.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg3);
++ core_if->hwcfg4.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg4);
++
++ DWC_DEBUGPL(DBG_CILV,"hwcfg1=%08x\n",core_if->hwcfg1.d32);
++ DWC_DEBUGPL(DBG_CILV,"hwcfg2=%08x\n",core_if->hwcfg2.d32);
++ DWC_DEBUGPL(DBG_CILV,"hwcfg3=%08x\n",core_if->hwcfg3.d32);
++ DWC_DEBUGPL(DBG_CILV,"hwcfg4=%08x\n",core_if->hwcfg4.d32);
++
++ core_if->hcfg.d32 = dwc_read_reg32(&core_if->host_if->host_global_regs->hcfg);
++ core_if->dcfg.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dcfg);
++
++ DWC_DEBUGPL(DBG_CILV,"hcfg=%08x\n",core_if->hcfg.d32);
++ DWC_DEBUGPL(DBG_CILV,"dcfg=%08x\n",core_if->dcfg.d32);
++
++ DWC_DEBUGPL(DBG_CILV,"op_mode=%0x\n",core_if->hwcfg2.b.op_mode);
++ DWC_DEBUGPL(DBG_CILV,"arch=%0x\n",core_if->hwcfg2.b.architecture);
++ DWC_DEBUGPL(DBG_CILV,"num_dev_ep=%d\n",core_if->hwcfg2.b.num_dev_ep);
++ DWC_DEBUGPL(DBG_CILV,"num_host_chan=%d\n",core_if->hwcfg2.b.num_host_chan);
++ DWC_DEBUGPL(DBG_CILV,"nonperio_tx_q_depth=0x%0x\n",core_if->hwcfg2.b.nonperio_tx_q_depth);
++ DWC_DEBUGPL(DBG_CILV,"host_perio_tx_q_depth=0x%0x\n",core_if->hwcfg2.b.host_perio_tx_q_depth);
++ DWC_DEBUGPL(DBG_CILV,"dev_token_q_depth=0x%0x\n",core_if->hwcfg2.b.dev_token_q_depth);
++
++ DWC_DEBUGPL(DBG_CILV,"Total FIFO SZ=%d\n", core_if->hwcfg3.b.dfifo_depth);
++ DWC_DEBUGPL(DBG_CILV,"xfer_size_cntr_width=%0x\n", core_if->hwcfg3.b.xfer_size_cntr_width);
++
++ /*
++ * Set the SRP sucess bit for FS-I2c
++ */
++ core_if->srp_success = 0;
++ core_if->srp_timer_started = 0;
++
++
++ /*
++ * Create new workqueue and init works
++ */
++ core_if->wq_otg = create_singlethread_workqueue("dwc_otg");
++ if(core_if->wq_otg == 0) {
++ DWC_DEBUGPL(DBG_CIL, "Creation of wq_otg failed\n");
++ kfree(host_if);
++ kfree(dev_if);
++ kfree(core_if);
++ return 0 * HZ;
++ }
++
++
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++
++ INIT_WORK(&core_if->w_conn_id, w_conn_id_status_change, core_if);
++ INIT_WORK(&core_if->w_wkp, w_wakeup_detected, core_if);
++
++#else
++
++ INIT_WORK(&core_if->w_conn_id, w_conn_id_status_change);
++ INIT_DELAYED_WORK(&core_if->w_wkp, w_wakeup_detected);
++
++#endif
++ return core_if;
++}
++
++/**
++ * This function frees the structures allocated by dwc_otg_cil_init().
++ *
++ * @param[in] core_if The core interface pointer returned from
++ * dwc_otg_cil_init().
++ *
++ */
++void dwc_otg_cil_remove(dwc_otg_core_if_t *core_if)
++{
++ /* Disable all interrupts */
++ dwc_modify_reg32(&core_if->core_global_regs->gahbcfg, 1, 0);
++ dwc_write_reg32(&core_if->core_global_regs->gintmsk, 0);
++
++ if (core_if->wq_otg) {
++ destroy_workqueue(core_if->wq_otg);
++ }
++ if (core_if->dev_if) {
++ kfree(core_if->dev_if);
++ }
++ if (core_if->host_if) {
++ kfree(core_if->host_if);
++ }
++ kfree(core_if);
++}
++
++/**
++ * This function enables the controller's Global Interrupt in the AHB Config
++ * register.
++ *
++ * @param[in] core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_enable_global_interrupts(dwc_otg_core_if_t *core_if)
++{
++ gahbcfg_data_t ahbcfg = { .d32 = 0};
++ ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */
++ dwc_modify_reg32(&core_if->core_global_regs->gahbcfg, 0, ahbcfg.d32);
++}
++
++/**
++ * This function disables the controller's Global Interrupt in the AHB Config
++ * register.
++ *
++ * @param[in] core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_disable_global_interrupts(dwc_otg_core_if_t *core_if)
++{
++ gahbcfg_data_t ahbcfg = { .d32 = 0};
++ ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */
++ dwc_modify_reg32(&core_if->core_global_regs->gahbcfg, ahbcfg.d32, 0);
++}
++
++/**
++ * This function initializes the commmon interrupts, used in both
++ * device and host modes.
++ *
++ * @param[in] core_if Programming view of the DWC_otg controller
++ *
++ */
++static void dwc_otg_enable_common_interrupts(dwc_otg_core_if_t *core_if)
++{
++ dwc_otg_core_global_regs_t *global_regs =
++ core_if->core_global_regs;
++ gintmsk_data_t intr_mask = { .d32 = 0};
++
++ /* Clear any pending OTG Interrupts */
++ dwc_write_reg32(&global_regs->gotgint, 0xFFFFFFFF);
++
++ /* Clear any pending interrupts */
++ dwc_write_reg32(&global_regs->gintsts, 0xFFFFFFFF);
++
++ /*
++ * Enable the interrupts in the GINTMSK.
++ */
++ intr_mask.b.modemismatch = 1;
++ intr_mask.b.otgintr = 1;
++
++ if (!core_if->dma_enable) {
++ intr_mask.b.rxstsqlvl = 1;
++ }
++
++ intr_mask.b.conidstschng = 1;
++ intr_mask.b.wkupintr = 1;
++ intr_mask.b.disconnect = 1;
++ intr_mask.b.usbsuspend = 1;
++ intr_mask.b.sessreqintr = 1;
++ dwc_write_reg32(&global_regs->gintmsk, intr_mask.d32);
++}
++
++/**
++ * Initializes the FSLSPClkSel field of the HCFG register depending on the PHY
++ * type.
++ */
++static void init_fslspclksel(dwc_otg_core_if_t *core_if)
++{
++ uint32_t val;
++ hcfg_data_t hcfg;
++
++ if (((core_if->hwcfg2.b.hs_phy_type == 2) &&
++ (core_if->hwcfg2.b.fs_phy_type == 1) &&
++ (core_if->core_params->ulpi_fs_ls)) ||
++ (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) {
++ /* Full speed PHY */
++ val = DWC_HCFG_48_MHZ;
++ }
++ else {
++ /* High speed PHY running at full speed or high speed */
++ val = DWC_HCFG_30_60_MHZ;
++ }
++
++ DWC_DEBUGPL(DBG_CIL, "Initializing HCFG.FSLSPClkSel to 0x%1x\n", val);
++ hcfg.d32 = dwc_read_reg32(&core_if->host_if->host_global_regs->hcfg);
++ hcfg.b.fslspclksel = val;
++ dwc_write_reg32(&core_if->host_if->host_global_regs->hcfg, hcfg.d32);
++}
++
++/**
++ * Initializes the DevSpd field of the DCFG register depending on the PHY type
++ * and the enumeration speed of the device.
++ */
++static void init_devspd(dwc_otg_core_if_t *core_if)
++{
++ uint32_t val;
++ dcfg_data_t dcfg;
++
++ if (((core_if->hwcfg2.b.hs_phy_type == 2) &&
++ (core_if->hwcfg2.b.fs_phy_type == 1) &&
++ (core_if->core_params->ulpi_fs_ls)) ||
++ (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) {
++ /* Full speed PHY */
++ val = 0x3;
++ }
++ else if (core_if->core_params->speed == DWC_SPEED_PARAM_FULL) {
++ /* High speed PHY running at full speed */
++ val = 0x1;
++ }
++ else {
++ /* High speed PHY running at high speed */
++ val = 0x0;
++ }
++
++ DWC_DEBUGPL(DBG_CIL, "Initializing DCFG.DevSpd to 0x%1x\n", val);
++
++ dcfg.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dcfg);
++ dcfg.b.devspd = val;
++ dwc_write_reg32(&core_if->dev_if->dev_global_regs->dcfg, dcfg.d32);
++}
++
++/**
++ * This function calculates the number of IN EPS
++ * using GHWCFG1 and GHWCFG2 registers values
++ *
++ * @param core_if Programming view of the DWC_otg controller
++ */
++static uint32_t calc_num_in_eps(dwc_otg_core_if_t *core_if)
++{
++ uint32_t num_in_eps = 0;
++ uint32_t num_eps = core_if->hwcfg2.b.num_dev_ep;
++ uint32_t hwcfg1 = core_if->hwcfg1.d32 >> 3;
++ uint32_t num_tx_fifos = core_if->hwcfg4.b.num_in_eps;
++ int i;
++
++
++ for(i = 0; i < num_eps; ++i)
++ {
++ if(!(hwcfg1 & 0x1))
++ num_in_eps++;
++
++ hwcfg1 >>= 2;
++ }
++
++ if(core_if->hwcfg4.b.ded_fifo_en) {
++ num_in_eps = (num_in_eps > num_tx_fifos) ? num_tx_fifos : num_in_eps;
++ }
++
++ return num_in_eps;
++}
++
++
++/**
++ * This function calculates the number of OUT EPS
++ * using GHWCFG1 and GHWCFG2 registers values
++ *
++ * @param core_if Programming view of the DWC_otg controller
++ */
++static uint32_t calc_num_out_eps(dwc_otg_core_if_t *core_if)
++{
++ uint32_t num_out_eps = 0;
++ uint32_t num_eps = core_if->hwcfg2.b.num_dev_ep;
++ uint32_t hwcfg1 = core_if->hwcfg1.d32 >> 2;
++ int i;
++
++ for(i = 0; i < num_eps; ++i)
++ {
++ if(!(hwcfg1 & 0x2))
++ num_out_eps++;
++
++ hwcfg1 >>= 2;
++ }
++ return num_out_eps;
++}
++/**
++ * This function initializes the DWC_otg controller registers and
++ * prepares the core for device mode or host mode operation.
++ *
++ * @param core_if Programming view of the DWC_otg controller
++ *
++ */
++void dwc_otg_core_init(dwc_otg_core_if_t *core_if)
++{
++ int i = 0;
++ dwc_otg_core_global_regs_t *global_regs =
++ core_if->core_global_regs;
++ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++ gahbcfg_data_t ahbcfg = { .d32 = 0 };
++ gusbcfg_data_t usbcfg = { .d32 = 0 };
++ gi2cctl_data_t i2cctl = { .d32 = 0 };
++
++ DWC_DEBUGPL(DBG_CILV, "dwc_otg_core_init(%p)\n", core_if);
++
++ /* Common Initialization */
++
++ usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
++
++// usbcfg.b.tx_end_delay = 1;
++ /* Program the ULPI External VBUS bit if needed */
++ usbcfg.b.ulpi_ext_vbus_drv =
++ (core_if->core_params->phy_ulpi_ext_vbus == DWC_PHY_ULPI_EXTERNAL_VBUS) ? 1 : 0;
++
++ /* Set external TS Dline pulsing */
++ usbcfg.b.term_sel_dl_pulse = (core_if->core_params->ts_dline == 1) ? 1 : 0;
++ dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32);
++
++
++ /* Reset the Controller */
++ dwc_otg_core_reset(core_if);
++
++ /* Initialize parameters from Hardware configuration registers. */
++ dev_if->num_in_eps = calc_num_in_eps(core_if);
++ dev_if->num_out_eps = calc_num_out_eps(core_if);
++
++
++ DWC_DEBUGPL(DBG_CIL, "num_dev_perio_in_ep=%d\n", core_if->hwcfg4.b.num_dev_perio_in_ep);
++
++ for (i=0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; i++)
++ {
++ dev_if->perio_tx_fifo_size[i] =
++ dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]) >> 16;
++ DWC_DEBUGPL(DBG_CIL, "Periodic Tx FIFO SZ #%d=0x%0x\n",
++ i, dev_if->perio_tx_fifo_size[i]);
++ }
++
++ for (i=0; i < core_if->hwcfg4.b.num_in_eps; i++)
++ {
++ dev_if->tx_fifo_size[i] =
++ dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]) >> 16;
++ DWC_DEBUGPL(DBG_CIL, "Tx FIFO SZ #%d=0x%0x\n",
++ i, dev_if->perio_tx_fifo_size[i]);
++ }
++
++ core_if->total_fifo_size = core_if->hwcfg3.b.dfifo_depth;
++ core_if->rx_fifo_size =
++ dwc_read_reg32(&global_regs->grxfsiz);
++ core_if->nperio_tx_fifo_size =
++ dwc_read_reg32(&global_regs->gnptxfsiz) >> 16;
++
++ DWC_DEBUGPL(DBG_CIL, "Total FIFO SZ=%d\n", core_if->total_fifo_size);
++ DWC_DEBUGPL(DBG_CIL, "Rx FIFO SZ=%d\n", core_if->rx_fifo_size);
++ DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO SZ=%d\n", core_if->nperio_tx_fifo_size);
++
++ /* This programming sequence needs to happen in FS mode before any other
++ * programming occurs */
++ if ((core_if->core_params->speed == DWC_SPEED_PARAM_FULL) &&
++ (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) {
++ /* If FS mode with FS PHY */
++
++ /* core_init() is now called on every switch so only call the
++ * following for the first time through. */
++ if (!core_if->phy_init_done) {
++ core_if->phy_init_done = 1;
++ DWC_DEBUGPL(DBG_CIL, "FS_PHY detected\n");
++ usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
++ usbcfg.b.physel = 1;
++ dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32);
++
++ /* Reset after a PHY select */
++ dwc_otg_core_reset(core_if);
++ }
++
++ /* Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS. Also
++ * do this on HNP Dev/Host mode switches (done in dev_init and
++ * host_init). */
++ if (dwc_otg_is_host_mode(core_if)) {
++ init_fslspclksel(core_if);
++ }
++ else {
++ init_devspd(core_if);
++ }
++
++ if (core_if->core_params->i2c_enable) {
++ DWC_DEBUGPL(DBG_CIL, "FS_PHY Enabling I2c\n");
++ /* Program GUSBCFG.OtgUtmifsSel to I2C */
++ usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
++ usbcfg.b.otgutmifssel = 1;
++ dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32);
++
++ /* Program GI2CCTL.I2CEn */
++ i2cctl.d32 = dwc_read_reg32(&global_regs->gi2cctl);
++ i2cctl.b.i2cdevaddr = 1;
++ i2cctl.b.i2cen = 0;
++ dwc_write_reg32 (&global_regs->gi2cctl, i2cctl.d32);
++ i2cctl.b.i2cen = 1;
++ dwc_write_reg32 (&global_regs->gi2cctl, i2cctl.d32);
++ }
++
++ } /* endif speed == DWC_SPEED_PARAM_FULL */
++
++ else {
++ /* High speed PHY. */
++ if (!core_if->phy_init_done) {
++ core_if->phy_init_done = 1;
++ /* HS PHY parameters. These parameters are preserved
++ * during soft reset so only program the first time. Do
++ * a soft reset immediately after setting phyif. */
++ usbcfg.b.ulpi_utmi_sel = core_if->core_params->phy_type;
++ if (usbcfg.b.ulpi_utmi_sel == 1) {
++ /* ULPI interface */
++ usbcfg.b.phyif = 0;
++ usbcfg.b.ddrsel = core_if->core_params->phy_ulpi_ddr;
++ }
++ else {
++ /* UTMI+ interface */
++ if (core_if->core_params->phy_utmi_width == 16) {
++ usbcfg.b.phyif = 1;
++ }
++ else {
++ usbcfg.b.phyif = 0;
++ }
++ }
++
++ dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
++
++ /* Reset after setting the PHY parameters */
++ dwc_otg_core_reset(core_if);
++ }
++ }
++
++ if ((core_if->hwcfg2.b.hs_phy_type == 2) &&
++ (core_if->hwcfg2.b.fs_phy_type == 1) &&
++ (core_if->core_params->ulpi_fs_ls)) {
++ DWC_DEBUGPL(DBG_CIL, "Setting ULPI FSLS\n");
++ usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
++ usbcfg.b.ulpi_fsls = 1;
++ usbcfg.b.ulpi_clk_sus_m = 1;
++ dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
++ }
++ else {
++ usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
++ usbcfg.b.ulpi_fsls = 0;
++ usbcfg.b.ulpi_clk_sus_m = 0;
++ dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
++ }
++
++ /* Program the GAHBCFG Register.*/
++ switch (core_if->hwcfg2.b.architecture) {
++
++ case DWC_SLAVE_ONLY_ARCH:
++ DWC_DEBUGPL(DBG_CIL, "Slave Only Mode\n");
++ ahbcfg.b.nptxfemplvl_txfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY;
++ ahbcfg.b.ptxfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY;
++ core_if->dma_enable = 0;
++ core_if->dma_desc_enable = 0;
++ break;
++
++ case DWC_EXT_DMA_ARCH:
++ DWC_DEBUGPL(DBG_CIL, "External DMA Mode\n");
++ ahbcfg.b.hburstlen = core_if->core_params->dma_burst_size;
++ core_if->dma_enable = (core_if->core_params->dma_enable != 0);
++ core_if->dma_desc_enable = (core_if->core_params->dma_desc_enable != 0);
++ break;
++
++ case DWC_INT_DMA_ARCH:
++ DWC_DEBUGPL(DBG_CIL, "Internal DMA Mode\n");
++ ahbcfg.b.hburstlen = DWC_GAHBCFG_INT_DMA_BURST_INCR;
++ core_if->dma_enable = (core_if->core_params->dma_enable != 0);
++ core_if->dma_desc_enable = (core_if->core_params->dma_desc_enable != 0);
++ break;
++
++ }
++ ahbcfg.b.dmaenable = core_if->dma_enable;
++ dwc_write_reg32(&global_regs->gahbcfg, ahbcfg.d32);
++
++ core_if->en_multiple_tx_fifo = core_if->hwcfg4.b.ded_fifo_en;
++
++ core_if->pti_enh_enable = core_if->core_params->pti_enable != 0;
++ core_if->multiproc_int_enable = core_if->core_params->mpi_enable;
++ DWC_PRINT("Periodic Transfer Interrupt Enhancement - %s\n", ((core_if->pti_enh_enable) ? "enabled": "disabled"));
++ DWC_PRINT("Multiprocessor Interrupt Enhancement - %s\n", ((core_if->multiproc_int_enable) ? "enabled": "disabled"));
++
++ /*
++ * Program the GUSBCFG register.
++ */
++ usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
++
++ switch (core_if->hwcfg2.b.op_mode) {
++ case DWC_MODE_HNP_SRP_CAPABLE:
++ usbcfg.b.hnpcap = (core_if->core_params->otg_cap ==
++ DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE);
++ usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
++ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
++ break;
++
++ case DWC_MODE_SRP_ONLY_CAPABLE:
++ usbcfg.b.hnpcap = 0;
++ usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
++ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
++ break;
++
++ case DWC_MODE_NO_HNP_SRP_CAPABLE:
++ usbcfg.b.hnpcap = 0;
++ usbcfg.b.srpcap = 0;
++ break;
++
++ case DWC_MODE_SRP_CAPABLE_DEVICE:
++ usbcfg.b.hnpcap = 0;
++ usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
++ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
++ break;
++
++ case DWC_MODE_NO_SRP_CAPABLE_DEVICE:
++ usbcfg.b.hnpcap = 0;
++ usbcfg.b.srpcap = 0;
++ break;
++
++ case DWC_MODE_SRP_CAPABLE_HOST:
++ usbcfg.b.hnpcap = 0;
++ usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
++ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
++ break;
++
++ case DWC_MODE_NO_SRP_CAPABLE_HOST:
++ usbcfg.b.hnpcap = 0;
++ usbcfg.b.srpcap = 0;
++ break;
++ }
++
++ dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
++
++ /* Enable common interrupts */
++ dwc_otg_enable_common_interrupts(core_if);
++
++ /* Do device or host intialization based on mode during PCD
++ * and HCD initialization */
++ if (dwc_otg_is_host_mode(core_if)) {
++ DWC_DEBUGPL(DBG_ANY, "Host Mode\n");
++ core_if->op_state = A_HOST;
++ }
++ else {
++ DWC_DEBUGPL(DBG_ANY, "Device Mode\n");
++ core_if->op_state = B_PERIPHERAL;
++#ifdef DWC_DEVICE_ONLY
++ dwc_otg_core_dev_init(core_if);
++#endif
++ }
++}
++
++
++/**
++ * This function enables the Device mode interrupts.
++ *
++ * @param core_if Programming view of DWC_otg controller
++ */
++void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t *core_if)
++{
++ gintmsk_data_t intr_mask = { .d32 = 0};
++ dwc_otg_core_global_regs_t *global_regs =
++ core_if->core_global_regs;
++
++ DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__);
++
++ /* Disable all interrupts. */
++ dwc_write_reg32(&global_regs->gintmsk, 0);
++
++ /* Clear any pending interrupts */
++ dwc_write_reg32(&global_regs->gintsts, 0xFFFFFFFF);
++
++ /* Enable the common interrupts */
++ dwc_otg_enable_common_interrupts(core_if);
++
++ /* Enable interrupts */
++ intr_mask.b.usbreset = 1;
++ intr_mask.b.enumdone = 1;
++
++ if(!core_if->multiproc_int_enable) {
++ intr_mask.b.inepintr = 1;
++ intr_mask.b.outepintr = 1;
++ }
++
++ intr_mask.b.erlysuspend = 1;
++
++ if(core_if->en_multiple_tx_fifo == 0) {
++ intr_mask.b.epmismatch = 1;
++ }
++
++
++#ifdef DWC_EN_ISOC
++ if(core_if->dma_enable) {
++ if(core_if->dma_desc_enable == 0) {
++ if(core_if->pti_enh_enable) {
++ dctl_data_t dctl = { .d32 = 0 };
++ dctl.b.ifrmnum = 1;
++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32);
++ } else {
++ intr_mask.b.incomplisoin = 1;
++ intr_mask.b.incomplisoout = 1;
++ }
++ }
++ } else {
++ intr_mask.b.incomplisoin = 1;
++ intr_mask.b.incomplisoout = 1;
++ }
++#endif // DWC_EN_ISOC
++
++/** @todo NGS: Should this be a module parameter? */
++#ifdef USE_PERIODIC_EP
++ intr_mask.b.isooutdrop = 1;
++ intr_mask.b.eopframe = 1;
++ intr_mask.b.incomplisoin = 1;
++ intr_mask.b.incomplisoout = 1;
++#endif
++
++ dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
++
++ DWC_DEBUGPL(DBG_CIL, "%s() gintmsk=%0x\n", __func__,
++ dwc_read_reg32(&global_regs->gintmsk));
++}
++
++/**
++ * This function initializes the DWC_otg controller registers for
++ * device mode.
++ *
++ * @param core_if Programming view of DWC_otg controller
++ *
++ */
++void dwc_otg_core_dev_init(dwc_otg_core_if_t *core_if)
++{
++ int i;
++ dwc_otg_core_global_regs_t *global_regs =
++ core_if->core_global_regs;
++ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++ dwc_otg_core_params_t *params = core_if->core_params;
++ dcfg_data_t dcfg = { .d32 = 0};
++ grstctl_t resetctl = { .d32 = 0 };
++ uint32_t rx_fifo_size;
++ fifosize_data_t nptxfifosize;
++ fifosize_data_t txfifosize;
++ dthrctl_data_t dthrctl;
++ fifosize_data_t ptxfifosize;
++
++ /* Restart the Phy Clock */
++ dwc_write_reg32(core_if->pcgcctl, 0);
++
++ /* Device configuration register */
++ init_devspd(core_if);
++ dcfg.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dcfg);
++ dcfg.b.descdma = (core_if->dma_desc_enable) ? 1 : 0;
++ dcfg.b.perfrint = DWC_DCFG_FRAME_INTERVAL_80;
++
++ dwc_write_reg32(&dev_if->dev_global_regs->dcfg, dcfg.d32);
++
++ /* Configure data FIFO sizes */
++ if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) {
++ DWC_DEBUGPL(DBG_CIL, "Total FIFO Size=%d\n", core_if->total_fifo_size);
++ DWC_DEBUGPL(DBG_CIL, "Rx FIFO Size=%d\n", params->dev_rx_fifo_size);
++ DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO Size=%d\n", params->dev_nperio_tx_fifo_size);
++
++ /* Rx FIFO */
++ DWC_DEBUGPL(DBG_CIL, "initial grxfsiz=%08x\n",
++ dwc_read_reg32(&global_regs->grxfsiz));
++
++ rx_fifo_size = params->dev_rx_fifo_size;
++ dwc_write_reg32(&global_regs->grxfsiz, rx_fifo_size);
++
++ DWC_DEBUGPL(DBG_CIL, "new grxfsiz=%08x\n",
++ dwc_read_reg32(&global_regs->grxfsiz));
++
++ /** Set Periodic Tx FIFO Mask all bits 0 */
++ core_if->p_tx_msk = 0;
++
++ /** Set Tx FIFO Mask all bits 0 */
++ core_if->tx_msk = 0;
++
++ if(core_if->en_multiple_tx_fifo == 0) {
++ /* Non-periodic Tx FIFO */
++ DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n",
++ dwc_read_reg32(&global_regs->gnptxfsiz));
++
++ nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size;
++ nptxfifosize.b.startaddr = params->dev_rx_fifo_size;
++
++ dwc_write_reg32(&global_regs->gnptxfsiz, nptxfifosize.d32);
++
++ DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n",
++ dwc_read_reg32(&global_regs->gnptxfsiz));
++
++ /**@todo NGS: Fix Periodic FIFO Sizing! */
++ /*
++ * Periodic Tx FIFOs These FIFOs are numbered from 1 to 15.
++ * Indexes of the FIFO size module parameters in the
++ * dev_perio_tx_fifo_size array and the FIFO size registers in
++ * the dptxfsiz array run from 0 to 14.
++ */
++ /** @todo Finish debug of this */
++ ptxfifosize.b.startaddr = nptxfifosize.b.startaddr + nptxfifosize.b.depth;
++ for (i=0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; i++)
++ {
++ ptxfifosize.b.depth = params->dev_perio_tx_fifo_size[i];
++ DWC_DEBUGPL(DBG_CIL, "initial dptxfsiz_dieptxf[%d]=%08x\n", i,
++ dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]));
++ dwc_write_reg32(&global_regs->dptxfsiz_dieptxf[i],
++ ptxfifosize.d32);
++ DWC_DEBUGPL(DBG_CIL, "new dptxfsiz_dieptxf[%d]=%08x\n", i,
++ dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]));
++ ptxfifosize.b.startaddr += ptxfifosize.b.depth;
++ }
++ }
++ else {
++ /*
++ * Tx FIFOs These FIFOs are numbered from 1 to 15.
++ * Indexes of the FIFO size module parameters in the
++ * dev_tx_fifo_size array and the FIFO size registers in
++ * the dptxfsiz_dieptxf array run from 0 to 14.
++ */
++
++
++ /* Non-periodic Tx FIFO */
++ DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n",
++ dwc_read_reg32(&global_regs->gnptxfsiz));
++
++ nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size;
++ nptxfifosize.b.startaddr = params->dev_rx_fifo_size;
++
++ dwc_write_reg32(&global_regs->gnptxfsiz, nptxfifosize.d32);
++
++ DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n",
++ dwc_read_reg32(&global_regs->gnptxfsiz));
++
++ txfifosize.b.startaddr = nptxfifosize.b.startaddr + nptxfifosize.b.depth;
++ /*
++ Modify by kaiker ,for RT3052 device mode config
++
++ In RT3052,Since the _core_if->hwcfg4.b.num_dev_perio_in_ep is
++ configed to 0 so these TX_FIF0 not config.IN EP will can't
++ more than 1 if not modify it.
++
++ */
++#if 1
++ for (i=1 ; i <= dev_if->num_in_eps; i++)
++#else
++ for (i=1; i < _core_if->hwcfg4.b.num_dev_perio_in_ep; i++)
++#endif
++ {
++
++ txfifosize.b.depth = params->dev_tx_fifo_size[i];
++
++ DWC_DEBUGPL(DBG_CIL, "initial dptxfsiz_dieptxf[%d]=%08x\n", i,
++ dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]));
++
++ dwc_write_reg32(&global_regs->dptxfsiz_dieptxf[i-1],
++ txfifosize.d32);
++
++ DWC_DEBUGPL(DBG_CIL, "new dptxfsiz_dieptxf[%d]=%08x\n", i,
++ dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i-1]));
++
++ txfifosize.b.startaddr += txfifosize.b.depth;
++ }
++ }
++ }
++ /* Flush the FIFOs */
++ dwc_otg_flush_tx_fifo(core_if, 0x10); /* all Tx FIFOs */
++ dwc_otg_flush_rx_fifo(core_if);
++
++ /* Flush the Learning Queue. */
++ resetctl.b.intknqflsh = 1;
++ dwc_write_reg32(&core_if->core_global_regs->grstctl, resetctl.d32);
++
++ /* Clear all pending Device Interrupts */
++
++ if(core_if->multiproc_int_enable) {
++ }
++
++ /** @todo - if the condition needed to be checked
++ * or in any case all pending interrutps should be cleared?
++ */
++ if(core_if->multiproc_int_enable) {
++ for(i = 0; i < core_if->dev_if->num_in_eps; ++i) {
++ dwc_write_reg32(&dev_if->dev_global_regs->diepeachintmsk[i], 0);
++ }
++
++ for(i = 0; i < core_if->dev_if->num_out_eps; ++i) {
++ dwc_write_reg32(&dev_if->dev_global_regs->doepeachintmsk[i], 0);
++ }
++
++ dwc_write_reg32(&dev_if->dev_global_regs->deachint, 0xFFFFFFFF);
++ dwc_write_reg32(&dev_if->dev_global_regs->deachintmsk, 0);
++ } else {
++ dwc_write_reg32(&dev_if->dev_global_regs->diepmsk, 0);
++ dwc_write_reg32(&dev_if->dev_global_regs->doepmsk, 0);
++ dwc_write_reg32(&dev_if->dev_global_regs->daint, 0xFFFFFFFF);
++ dwc_write_reg32(&dev_if->dev_global_regs->daintmsk, 0);
++ }
++
++ for (i=0; i <= dev_if->num_in_eps; i++)
++ {
++ depctl_data_t depctl;
++ depctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[i]->diepctl);
++ if (depctl.b.epena) {
++ depctl.d32 = 0;
++ depctl.b.epdis = 1;
++ depctl.b.snak = 1;
++ }
++ else {
++ depctl.d32 = 0;
++ }
++
++ dwc_write_reg32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32);
++
++
++ dwc_write_reg32(&dev_if->in_ep_regs[i]->dieptsiz, 0);
++ dwc_write_reg32(&dev_if->in_ep_regs[i]->diepdma, 0);
++ dwc_write_reg32(&dev_if->in_ep_regs[i]->diepint, 0xFF);
++ }
++
++ for (i=0; i <= dev_if->num_out_eps; i++)
++ {
++ depctl_data_t depctl;
++ depctl.d32 = dwc_read_reg32(&dev_if->out_ep_regs[i]->doepctl);
++ if (depctl.b.epena) {
++ depctl.d32 = 0;
++ depctl.b.epdis = 1;
++ depctl.b.snak = 1;
++ }
++ else {
++ depctl.d32 = 0;
++ }
++
++ dwc_write_reg32(&dev_if->out_ep_regs[i]->doepctl, depctl.d32);
++
++ dwc_write_reg32(&dev_if->out_ep_regs[i]->doeptsiz, 0);
++ dwc_write_reg32(&dev_if->out_ep_regs[i]->doepdma, 0);
++ dwc_write_reg32(&dev_if->out_ep_regs[i]->doepint, 0xFF);
++ }
++
++ if(core_if->en_multiple_tx_fifo && core_if->dma_enable) {
++ dev_if->non_iso_tx_thr_en = params->thr_ctl & 0x1;
++ dev_if->iso_tx_thr_en = (params->thr_ctl >> 1) & 0x1;
++ dev_if->rx_thr_en = (params->thr_ctl >> 2) & 0x1;
++
++ dev_if->rx_thr_length = params->rx_thr_length;
++ dev_if->tx_thr_length = params->tx_thr_length;
++
++ dev_if->setup_desc_index = 0;
++
++ dthrctl.d32 = 0;
++ dthrctl.b.non_iso_thr_en = dev_if->non_iso_tx_thr_en;
++ dthrctl.b.iso_thr_en = dev_if->iso_tx_thr_en;
++ dthrctl.b.tx_thr_len = dev_if->tx_thr_length;
++ dthrctl.b.rx_thr_en = dev_if->rx_thr_en;
++ dthrctl.b.rx_thr_len = dev_if->rx_thr_length;
++
++ dwc_write_reg32(&dev_if->dev_global_regs->dtknqr3_dthrctl, dthrctl.d32);
++
++ DWC_DEBUGPL(DBG_CIL, "Non ISO Tx Thr - %d\nISO Tx Thr - %d\nRx Thr - %d\nTx Thr Len - %d\nRx Thr Len - %d\n",
++ dthrctl.b.non_iso_thr_en, dthrctl.b.iso_thr_en, dthrctl.b.rx_thr_en, dthrctl.b.tx_thr_len, dthrctl.b.rx_thr_len);
++
++ }
++
++ dwc_otg_enable_device_interrupts(core_if);
++
++ {
++ diepmsk_data_t msk = { .d32 = 0 };
++ msk.b.txfifoundrn = 1;
++ if(core_if->multiproc_int_enable) {
++ dwc_modify_reg32(&dev_if->dev_global_regs->diepeachintmsk[0], msk.d32, msk.d32);
++ } else {
++ dwc_modify_reg32(&dev_if->dev_global_regs->diepmsk, msk.d32, msk.d32);
++ }
++ }
++
++
++ if(core_if->multiproc_int_enable) {
++ /* Set NAK on Babble */
++ dctl_data_t dctl = { .d32 = 0};
++ dctl.b.nakonbble = 1;
++ dwc_modify_reg32(&dev_if->dev_global_regs->dctl, 0, dctl.d32);
++ }
++}
++
++/**
++ * This function enables the Host mode interrupts.
++ *
++ * @param core_if Programming view of DWC_otg controller
++ */
++void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t *core_if)
++{
++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++ gintmsk_data_t intr_mask = { .d32 = 0 };
++
++ DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__);
++
++ /* Disable all interrupts. */
++ dwc_write_reg32(&global_regs->gintmsk, 0);
++
++ /* Clear any pending interrupts. */
++ dwc_write_reg32(&global_regs->gintsts, 0xFFFFFFFF);
++
++ /* Enable the common interrupts */
++ dwc_otg_enable_common_interrupts(core_if);
++
++ /*
++ * Enable host mode interrupts without disturbing common
++ * interrupts.
++ */
++ intr_mask.b.sofintr = 1;
++ intr_mask.b.portintr = 1;
++ intr_mask.b.hcintr = 1;
++
++ dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
++}
++
++/**
++ * This function disables the Host Mode interrupts.
++ *
++ * @param core_if Programming view of DWC_otg controller
++ */
++void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t *core_if)
++{
++ dwc_otg_core_global_regs_t *global_regs =
++ core_if->core_global_regs;
++ gintmsk_data_t intr_mask = { .d32 = 0 };
++
++ DWC_DEBUGPL(DBG_CILV, "%s()\n", __func__);
++
++ /*
++ * Disable host mode interrupts without disturbing common
++ * interrupts.
++ */
++ intr_mask.b.sofintr = 1;
++ intr_mask.b.portintr = 1;
++ intr_mask.b.hcintr = 1;
++ intr_mask.b.ptxfempty = 1;
++ intr_mask.b.nptxfempty = 1;
++
++ dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0);
++}
++
++/**
++ * This function initializes the DWC_otg controller registers for
++ * host mode.
++ *
++ * This function flushes the Tx and Rx FIFOs and it flushes any entries in the
++ * request queues. Host channels are reset to ensure that they are ready for
++ * performing transfers.
++ *
++ * @param core_if Programming view of DWC_otg controller
++ *
++ */
++void dwc_otg_core_host_init(dwc_otg_core_if_t *core_if)
++{
++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++ dwc_otg_host_if_t *host_if = core_if->host_if;
++ dwc_otg_core_params_t *params = core_if->core_params;
++ hprt0_data_t hprt0 = { .d32 = 0 };
++ fifosize_data_t nptxfifosize;
++ fifosize_data_t ptxfifosize;
++ int i;
++ hcchar_data_t hcchar;
++ hcfg_data_t hcfg;
++ dwc_otg_hc_regs_t *hc_regs;
++ int num_channels;
++ gotgctl_data_t gotgctl = { .d32 = 0 };
++
++ DWC_DEBUGPL(DBG_CILV,"%s(%p)\n", __func__, core_if);
++
++ /* Restart the Phy Clock */
++ dwc_write_reg32(core_if->pcgcctl, 0);
++
++ /* Initialize Host Configuration Register */
++ init_fslspclksel(core_if);
++ if (core_if->core_params->speed == DWC_SPEED_PARAM_FULL)
++ {
++ hcfg.d32 = dwc_read_reg32(&host_if->host_global_regs->hcfg);
++ hcfg.b.fslssupp = 1;
++ dwc_write_reg32(&host_if->host_global_regs->hcfg, hcfg.d32);
++ }
++
++ /* Configure data FIFO sizes */
++ if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) {
++ DWC_DEBUGPL(DBG_CIL,"Total FIFO Size=%d\n", core_if->total_fifo_size);
++ DWC_DEBUGPL(DBG_CIL,"Rx FIFO Size=%d\n", params->host_rx_fifo_size);
++ DWC_DEBUGPL(DBG_CIL,"NP Tx FIFO Size=%d\n", params->host_nperio_tx_fifo_size);
++ DWC_DEBUGPL(DBG_CIL,"P Tx FIFO Size=%d\n", params->host_perio_tx_fifo_size);
++
++ /* Rx FIFO */
++ DWC_DEBUGPL(DBG_CIL,"initial grxfsiz=%08x\n", dwc_read_reg32(&global_regs->grxfsiz));
++ dwc_write_reg32(&global_regs->grxfsiz, params->host_rx_fifo_size);
++ DWC_DEBUGPL(DBG_CIL,"new grxfsiz=%08x\n", dwc_read_reg32(&global_regs->grxfsiz));
++
++ /* Non-periodic Tx FIFO */
++ DWC_DEBUGPL(DBG_CIL,"initial gnptxfsiz=%08x\n", dwc_read_reg32(&global_regs->gnptxfsiz));
++ nptxfifosize.b.depth = params->host_nperio_tx_fifo_size;
++ nptxfifosize.b.startaddr = params->host_rx_fifo_size;
++ dwc_write_reg32(&global_regs->gnptxfsiz, nptxfifosize.d32);
++ DWC_DEBUGPL(DBG_CIL,"new gnptxfsiz=%08x\n", dwc_read_reg32(&global_regs->gnptxfsiz));
++
++ /* Periodic Tx FIFO */
++ DWC_DEBUGPL(DBG_CIL,"initial hptxfsiz=%08x\n", dwc_read_reg32(&global_regs->hptxfsiz));
++ ptxfifosize.b.depth = params->host_perio_tx_fifo_size;
++ ptxfifosize.b.startaddr = nptxfifosize.b.startaddr + nptxfifosize.b.depth;
++ dwc_write_reg32(&global_regs->hptxfsiz, ptxfifosize.d32);
++ DWC_DEBUGPL(DBG_CIL,"new hptxfsiz=%08x\n", dwc_read_reg32(&global_regs->hptxfsiz));
++ }
++
++ /* Clear Host Set HNP Enable in the OTG Control Register */
++ gotgctl.b.hstsethnpen = 1;
++ dwc_modify_reg32(&global_regs->gotgctl, gotgctl.d32, 0);
++
++ /* Make sure the FIFOs are flushed. */
++ dwc_otg_flush_tx_fifo(core_if, 0x10 /* all Tx FIFOs */);
++ dwc_otg_flush_rx_fifo(core_if);
++
++ /* Flush out any leftover queued requests. */
++ num_channels = core_if->core_params->host_channels;
++ for (i = 0; i < num_channels; i++)
++ {
++ hc_regs = core_if->host_if->hc_regs[i];
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ hcchar.b.chen = 0;
++ hcchar.b.chdis = 1;
++ hcchar.b.epdir = 0;
++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++ }
++
++ /* Halt all channels to put them into a known state. */
++ for (i = 0; i < num_channels; i++)
++ {
++ int count = 0;
++ hc_regs = core_if->host_if->hc_regs[i];
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ hcchar.b.chen = 1;
++ hcchar.b.chdis = 1;
++ hcchar.b.epdir = 0;
++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++ DWC_DEBUGPL(DBG_HCDV, "%s: Halt channel %d\n", __func__, i);
++ do {
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ if (++count > 1000)
++ {
++ DWC_ERROR("%s: Unable to clear halt on channel %d\n",
++ __func__, i);
++ break;
++ }
++ }
++ while (hcchar.b.chen);
++ }
++
++ /* Turn on the vbus power. */
++ DWC_PRINT("Init: Port Power? op_state=%d\n", core_if->op_state);
++ if (core_if->op_state == A_HOST) {
++ hprt0.d32 = dwc_otg_read_hprt0(core_if);
++ DWC_PRINT("Init: Power Port (%d)\n", hprt0.b.prtpwr);
++ if (hprt0.b.prtpwr == 0) {
++ hprt0.b.prtpwr = 1;
++ dwc_write_reg32(host_if->hprt0, hprt0.d32);
++ }
++ }
++
++ dwc_otg_enable_host_interrupts(core_if);
++}
++
++/**
++ * Prepares a host channel for transferring packets to/from a specific
++ * endpoint. The HCCHARn register is set up with the characteristics specified
++ * in _hc. Host channel interrupts that may need to be serviced while this
++ * transfer is in progress are enabled.
++ *
++ * @param core_if Programming view of DWC_otg controller
++ * @param hc Information needed to initialize the host channel
++ */
++void dwc_otg_hc_init(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
++{
++ uint32_t intr_enable;
++ hcintmsk_data_t hc_intr_mask;
++ gintmsk_data_t gintmsk = { .d32 = 0 };
++ hcchar_data_t hcchar;
++ hcsplt_data_t hcsplt;
++
++ uint8_t hc_num = hc->hc_num;
++ dwc_otg_host_if_t *host_if = core_if->host_if;
++ dwc_otg_hc_regs_t *hc_regs = host_if->hc_regs[hc_num];
++
++ /* Clear old interrupt conditions for this host channel. */
++ hc_intr_mask.d32 = 0xFFFFFFFF;
++ hc_intr_mask.b.reserved = 0;
++ dwc_write_reg32(&hc_regs->hcint, hc_intr_mask.d32);
++
++ /* Enable channel interrupts required for this transfer. */
++ hc_intr_mask.d32 = 0;
++ hc_intr_mask.b.chhltd = 1;
++ if (core_if->dma_enable) {
++ hc_intr_mask.b.ahberr = 1;
++ if (hc->error_state && !hc->do_split &&
++ hc->ep_type != DWC_OTG_EP_TYPE_ISOC) {
++ hc_intr_mask.b.ack = 1;
++ if (hc->ep_is_in) {
++ hc_intr_mask.b.datatglerr = 1;
++ if (hc->ep_type != DWC_OTG_EP_TYPE_INTR) {
++ hc_intr_mask.b.nak = 1;
++ }
++ }
++ }
++ }
++ else {
++ switch (hc->ep_type) {
++ case DWC_OTG_EP_TYPE_CONTROL:
++ case DWC_OTG_EP_TYPE_BULK:
++ hc_intr_mask.b.xfercompl = 1;
++ hc_intr_mask.b.stall = 1;
++ hc_intr_mask.b.xacterr = 1;
++ hc_intr_mask.b.datatglerr = 1;
++ if (hc->ep_is_in) {
++ hc_intr_mask.b.bblerr = 1;
++ }
++ else {
++ hc_intr_mask.b.nak = 1;
++ hc_intr_mask.b.nyet = 1;
++ if (hc->do_ping) {
++ hc_intr_mask.b.ack = 1;
++ }
++ }
++
++ if (hc->do_split) {
++ hc_intr_mask.b.nak = 1;
++ if (hc->complete_split) {
++ hc_intr_mask.b.nyet = 1;
++ }
++ else {
++ hc_intr_mask.b.ack = 1;
++ }
++ }
++
++ if (hc->error_state) {
++ hc_intr_mask.b.ack = 1;
++ }
++ break;
++ case DWC_OTG_EP_TYPE_INTR:
++ hc_intr_mask.b.xfercompl = 1;
++ hc_intr_mask.b.nak = 1;
++ hc_intr_mask.b.stall = 1;
++ hc_intr_mask.b.xacterr = 1;
++ hc_intr_mask.b.datatglerr = 1;
++ hc_intr_mask.b.frmovrun = 1;
++
++ if (hc->ep_is_in) {
++ hc_intr_mask.b.bblerr = 1;
++ }
++ if (hc->error_state) {
++ hc_intr_mask.b.ack = 1;
++ }
++ if (hc->do_split) {
++ if (hc->complete_split) {
++ hc_intr_mask.b.nyet = 1;
++ }
++ else {
++ hc_intr_mask.b.ack = 1;
++ }
++ }
++ break;
++ case DWC_OTG_EP_TYPE_ISOC:
++ hc_intr_mask.b.xfercompl = 1;
++ hc_intr_mask.b.frmovrun = 1;
++ hc_intr_mask.b.ack = 1;
++
++ if (hc->ep_is_in) {
++ hc_intr_mask.b.xacterr = 1;
++ hc_intr_mask.b.bblerr = 1;
++ }
++ break;
++ }
++ }
++ dwc_write_reg32(&hc_regs->hcintmsk, hc_intr_mask.d32);
++
++// if(hc->ep_type == DWC_OTG_EP_TYPE_BULK && !hc->ep_is_in)
++// hc->max_packet = 512;
++ /* Enable the top level host channel interrupt. */
++ intr_enable = (1 << hc_num);
++ dwc_modify_reg32(&host_if->host_global_regs->haintmsk, 0, intr_enable);
++
++ /* Make sure host channel interrupts are enabled. */
++ gintmsk.b.hcintr = 1;
++ dwc_modify_reg32(&core_if->core_global_regs->gintmsk, 0, gintmsk.d32);
++
++ /*
++ * Program the HCCHARn register with the endpoint characteristics for
++ * the current transfer.
++ */
++ hcchar.d32 = 0;
++ hcchar.b.devaddr = hc->dev_addr;
++ hcchar.b.epnum = hc->ep_num;
++ hcchar.b.epdir = hc->ep_is_in;
++ hcchar.b.lspddev = (hc->speed == DWC_OTG_EP_SPEED_LOW);
++ hcchar.b.eptype = hc->ep_type;
++ hcchar.b.mps = hc->max_packet;
++
++ dwc_write_reg32(&host_if->hc_regs[hc_num]->hcchar, hcchar.d32);
++
++ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
++ DWC_DEBUGPL(DBG_HCDV, " Dev Addr: %d\n", hcchar.b.devaddr);
++ DWC_DEBUGPL(DBG_HCDV, " Ep Num: %d\n", hcchar.b.epnum);
++ DWC_DEBUGPL(DBG_HCDV, " Is In: %d\n", hcchar.b.epdir);
++ DWC_DEBUGPL(DBG_HCDV, " Is Low Speed: %d\n", hcchar.b.lspddev);
++ DWC_DEBUGPL(DBG_HCDV, " Ep Type: %d\n", hcchar.b.eptype);
++ DWC_DEBUGPL(DBG_HCDV, " Max Pkt: %d\n", hcchar.b.mps);
++ DWC_DEBUGPL(DBG_HCDV, " Multi Cnt: %d\n", hcchar.b.multicnt);
++
++ /*
++ * Program the HCSPLIT register for SPLITs
++ */
++ hcsplt.d32 = 0;
++ if (hc->do_split) {
++ DWC_DEBUGPL(DBG_HCDV, "Programming HC %d with split --> %s\n", hc->hc_num,
++ hc->complete_split ? "CSPLIT" : "SSPLIT");
++ hcsplt.b.compsplt = hc->complete_split;
++ hcsplt.b.xactpos = hc->xact_pos;
++ hcsplt.b.hubaddr = hc->hub_addr;
++ hcsplt.b.prtaddr = hc->port_addr;
++ DWC_DEBUGPL(DBG_HCDV, " comp split %d\n", hc->complete_split);
++ DWC_DEBUGPL(DBG_HCDV, " xact pos %d\n", hc->xact_pos);
++ DWC_DEBUGPL(DBG_HCDV, " hub addr %d\n", hc->hub_addr);
++ DWC_DEBUGPL(DBG_HCDV, " port addr %d\n", hc->port_addr);
++ DWC_DEBUGPL(DBG_HCDV, " is_in %d\n", hc->ep_is_in);
++ DWC_DEBUGPL(DBG_HCDV, " Max Pkt: %d\n", hcchar.b.mps);
++ DWC_DEBUGPL(DBG_HCDV, " xferlen: %d\n", hc->xfer_len);
++ }
++ dwc_write_reg32(&host_if->hc_regs[hc_num]->hcsplt, hcsplt.d32);
++
++}
++
++/**
++ * Attempts to halt a host channel. This function should only be called in
++ * Slave mode or to abort a transfer in either Slave mode or DMA mode. Under
++ * normal circumstances in DMA mode, the controller halts the channel when the
++ * transfer is complete or a condition occurs that requires application
++ * intervention.
++ *
++ * In slave mode, checks for a free request queue entry, then sets the Channel
++ * Enable and Channel Disable bits of the Host Channel Characteristics
++ * register of the specified channel to intiate the halt. If there is no free
++ * request queue entry, sets only the Channel Disable bit of the HCCHARn
++ * register to flush requests for this channel. In the latter case, sets a
++ * flag to indicate that the host channel needs to be halted when a request
++ * queue slot is open.
++ *
++ * In DMA mode, always sets the Channel Enable and Channel Disable bits of the
++ * HCCHARn register. The controller ensures there is space in the request
++ * queue before submitting the halt request.
++ *
++ * Some time may elapse before the core flushes any posted requests for this
++ * host channel and halts. The Channel Halted interrupt handler completes the
++ * deactivation of the host channel.
++ *
++ * @param core_if Controller register interface.
++ * @param hc Host channel to halt.
++ * @param halt_status Reason for halting the channel.
++ */
++void dwc_otg_hc_halt(dwc_otg_core_if_t *core_if,
++ dwc_hc_t *hc,
++ dwc_otg_halt_status_e halt_status)
++{
++ gnptxsts_data_t nptxsts;
++ hptxsts_data_t hptxsts;
++ hcchar_data_t hcchar;
++ dwc_otg_hc_regs_t *hc_regs;
++ dwc_otg_core_global_regs_t *global_regs;
++ dwc_otg_host_global_regs_t *host_global_regs;
++
++ hc_regs = core_if->host_if->hc_regs[hc->hc_num];
++ global_regs = core_if->core_global_regs;
++ host_global_regs = core_if->host_if->host_global_regs;
++
++ WARN_ON(halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS);
++
++ if (halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE ||
++ halt_status == DWC_OTG_HC_XFER_AHB_ERR) {
++ /*
++ * Disable all channel interrupts except Ch Halted. The QTD
++ * and QH state associated with this transfer has been cleared
++ * (in the case of URB_DEQUEUE), so the channel needs to be
++ * shut down carefully to prevent crashes.
++ */
++ hcintmsk_data_t hcintmsk;
++ hcintmsk.d32 = 0;
++ hcintmsk.b.chhltd = 1;
++ dwc_write_reg32(&hc_regs->hcintmsk, hcintmsk.d32);
++
++ /*
++ * Make sure no other interrupts besides halt are currently
++ * pending. Handling another interrupt could cause a crash due
++ * to the QTD and QH state.
++ */
++ dwc_write_reg32(&hc_regs->hcint, ~hcintmsk.d32);
++
++ /*
++ * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR
++ * even if the channel was already halted for some other
++ * reason.
++ */
++ hc->halt_status = halt_status;
++
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ if (hcchar.b.chen == 0) {
++ /*
++ * The channel is either already halted or it hasn't
++ * started yet. In DMA mode, the transfer may halt if
++ * it finishes normally or a condition occurs that
++ * requires driver intervention. Don't want to halt
++ * the channel again. In either Slave or DMA mode,
++ * it's possible that the transfer has been assigned
++ * to a channel, but not started yet when an URB is
++ * dequeued. Don't want to halt a channel that hasn't
++ * started yet.
++ */
++ return;
++ }
++ }
++
++ if (hc->halt_pending) {
++ /*
++ * A halt has already been issued for this channel. This might
++ * happen when a transfer is aborted by a higher level in
++ * the stack.
++ */
++#ifdef DEBUG
++ DWC_PRINT("*** %s: Channel %d, _hc->halt_pending already set ***\n",
++ __func__, hc->hc_num);
++
++/* dwc_otg_dump_global_registers(core_if); */
++/* dwc_otg_dump_host_registers(core_if); */
++#endif
++ return;
++ }
++
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ hcchar.b.chen = 1;
++ hcchar.b.chdis = 1;
++
++ if (!core_if->dma_enable) {
++ /* Check for space in the request queue to issue the halt. */
++ if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL ||
++ hc->ep_type == DWC_OTG_EP_TYPE_BULK) {
++ nptxsts.d32 = dwc_read_reg32(&global_regs->gnptxsts);
++ if (nptxsts.b.nptxqspcavail == 0) {
++ hcchar.b.chen = 0;
++ }
++ }
++ else {
++ hptxsts.d32 = dwc_read_reg32(&host_global_regs->hptxsts);
++ if ((hptxsts.b.ptxqspcavail == 0) || (core_if->queuing_high_bandwidth)) {
++ hcchar.b.chen = 0;
++ }
++ }
++ }
++
++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++
++ hc->halt_status = halt_status;
++
++ if (hcchar.b.chen) {
++ hc->halt_pending = 1;
++ hc->halt_on_queue = 0;
++ }
++ else {
++ hc->halt_on_queue = 1;
++ }
++
++ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
++ DWC_DEBUGPL(DBG_HCDV, " hcchar: 0x%08x\n", hcchar.d32);
++ DWC_DEBUGPL(DBG_HCDV, " halt_pending: %d\n", hc->halt_pending);
++ DWC_DEBUGPL(DBG_HCDV, " halt_on_queue: %d\n", hc->halt_on_queue);
++ DWC_DEBUGPL(DBG_HCDV, " halt_status: %d\n", hc->halt_status);
++
++ return;
++}
++
++/**
++ * Clears the transfer state for a host channel. This function is normally
++ * called after a transfer is done and the host channel is being released.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param hc Identifies the host channel to clean up.
++ */
++void dwc_otg_hc_cleanup(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
++{
++ dwc_otg_hc_regs_t *hc_regs;
++
++ hc->xfer_started = 0;
++
++ /*
++ * Clear channel interrupt enables and any unhandled channel interrupt
++ * conditions.
++ */
++ hc_regs = core_if->host_if->hc_regs[hc->hc_num];
++ dwc_write_reg32(&hc_regs->hcintmsk, 0);
++ dwc_write_reg32(&hc_regs->hcint, 0xFFFFFFFF);
++
++#ifdef DEBUG
++ del_timer(&core_if->hc_xfer_timer[hc->hc_num]);
++ {
++ hcchar_data_t hcchar;
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ if (hcchar.b.chdis) {
++ DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n",
++ __func__, hc->hc_num, hcchar.d32);
++ }
++ }
++#endif
++}
++
++/**
++ * Sets the channel property that indicates in which frame a periodic transfer
++ * should occur. This is always set to the _next_ frame. This function has no
++ * effect on non-periodic transfers.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param hc Identifies the host channel to set up and its properties.
++ * @param hcchar Current value of the HCCHAR register for the specified host
++ * channel.
++ */
++static inline void hc_set_even_odd_frame(dwc_otg_core_if_t *core_if,
++ dwc_hc_t *hc,
++ hcchar_data_t *hcchar)
++{
++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++ hfnum_data_t hfnum;
++ hfnum.d32 = dwc_read_reg32(&core_if->host_if->host_global_regs->hfnum);
++
++ /* 1 if _next_ frame is odd, 0 if it's even */
++ hcchar->b.oddfrm = (hfnum.b.frnum & 0x1) ? 0 : 1;
++#ifdef DEBUG
++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR && hc->do_split && !hc->complete_split) {
++ switch (hfnum.b.frnum & 0x7) {
++ case 7:
++ core_if->hfnum_7_samples++;
++ core_if->hfnum_7_frrem_accum += hfnum.b.frrem;
++ break;
++ case 0:
++ core_if->hfnum_0_samples++;
++ core_if->hfnum_0_frrem_accum += hfnum.b.frrem;
++ break;
++ default:
++ core_if->hfnum_other_samples++;
++ core_if->hfnum_other_frrem_accum += hfnum.b.frrem;
++ break;
++ }
++ }
++#endif
++ }
++}
++
++#ifdef DEBUG
++static void hc_xfer_timeout(unsigned long ptr)
++{
++ hc_xfer_info_t *xfer_info = (hc_xfer_info_t *)ptr;
++ int hc_num = xfer_info->hc->hc_num;
++ DWC_WARN("%s: timeout on channel %d\n", __func__, hc_num);
++ DWC_WARN(" start_hcchar_val 0x%08x\n", xfer_info->core_if->start_hcchar_val[hc_num]);
++}
++#endif
++
++/*
++ * This function does the setup for a data transfer for a host channel and
++ * starts the transfer. May be called in either Slave mode or DMA mode. In
++ * Slave mode, the caller must ensure that there is sufficient space in the
++ * request queue and Tx Data FIFO.
++ *
++ * For an OUT transfer in Slave mode, it loads a data packet into the
++ * appropriate FIFO. If necessary, additional data packets will be loaded in
++ * the Host ISR.
++ *
++ * For an IN transfer in Slave mode, a data packet is requested. The data
++ * packets are unloaded from the Rx FIFO in the Host ISR. If necessary,
++ * additional data packets are requested in the Host ISR.
++ *
++ * For a PING transfer in Slave mode, the Do Ping bit is set in the egards,
++ *
++ * Steven
++ *
++ * register along with a packet count of 1 and the channel is enabled. This
++ * causes a single PING transaction to occur. Other fields in HCTSIZ are
++ * simply set to 0 since no data transfer occurs in this case.
++ *
++ * For a PING transfer in DMA mode, the HCTSIZ register is initialized with
++ * all the information required to perform the subsequent data transfer. In
++ * addition, the Do Ping bit is set in the HCTSIZ register. In this case, the
++ * controller performs the entire PING protocol, then starts the data
++ * transfer.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param hc Information needed to initialize the host channel. The xfer_len
++ * value may be reduced to accommodate the max widths of the XferSize and
++ * PktCnt fields in the HCTSIZn register. The multi_count value may be changed
++ * to reflect the final xfer_len value.
++ */
++void dwc_otg_hc_start_transfer(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
++{
++ hcchar_data_t hcchar;
++ hctsiz_data_t hctsiz;
++ uint16_t num_packets;
++ uint32_t max_hc_xfer_size = core_if->core_params->max_transfer_size;
++ uint16_t max_hc_pkt_count = core_if->core_params->max_packet_count;
++ dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num];
++
++ hctsiz.d32 = 0;
++
++ if (hc->do_ping) {
++ if (!core_if->dma_enable) {
++ dwc_otg_hc_do_ping(core_if, hc);
++ hc->xfer_started = 1;
++ return;
++ }
++ else {
++ hctsiz.b.dopng = 1;
++ }
++ }
++
++ if (hc->do_split) {
++ num_packets = 1;
++
++ if (hc->complete_split && !hc->ep_is_in) {
++ /* For CSPLIT OUT Transfer, set the size to 0 so the
++ * core doesn't expect any data written to the FIFO */
++ hc->xfer_len = 0;
++ }
++ else if (hc->ep_is_in || (hc->xfer_len > hc->max_packet)) {
++ hc->xfer_len = hc->max_packet;
++ }
++ else if (!hc->ep_is_in && (hc->xfer_len > 188)) {
++ hc->xfer_len = 188;
++ }
++
++ hctsiz.b.xfersize = hc->xfer_len;
++ }
++ else {
++ /*
++ * Ensure that the transfer length and packet count will fit
++ * in the widths allocated for them in the HCTSIZn register.
++ */
++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++ /*
++ * Make sure the transfer size is no larger than one
++ * (micro)frame's worth of data. (A check was done
++ * when the periodic transfer was accepted to ensure
++ * that a (micro)frame's worth of data can be
++ * programmed into a channel.)
++ */
++ uint32_t max_periodic_len = hc->multi_count * hc->max_packet;
++ if (hc->xfer_len > max_periodic_len) {
++ hc->xfer_len = max_periodic_len;
++ }
++ else {
++ }
++
++ }
++ else if (hc->xfer_len > max_hc_xfer_size) {
++ /* Make sure that xfer_len is a multiple of max packet size. */
++ hc->xfer_len = max_hc_xfer_size - hc->max_packet + 1;
++ }
++
++ if (hc->xfer_len > 0) {
++ num_packets = (hc->xfer_len + hc->max_packet - 1) / hc->max_packet;
++ if (num_packets > max_hc_pkt_count) {
++ num_packets = max_hc_pkt_count;
++ hc->xfer_len = num_packets * hc->max_packet;
++ }
++ }
++ else {
++ /* Need 1 packet for transfer length of 0. */
++ num_packets = 1;
++ }
++
++ if (hc->ep_is_in) {
++ /* Always program an integral # of max packets for IN transfers. */
++ hc->xfer_len = num_packets * hc->max_packet;
++ }
++
++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++ /*
++ * Make sure that the multi_count field matches the
++ * actual transfer length.
++ */
++ hc->multi_count = num_packets;
++ }
++
++ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++ /* Set up the initial PID for the transfer. */
++ if (hc->speed == DWC_OTG_EP_SPEED_HIGH) {
++ if (hc->ep_is_in) {
++ if (hc->multi_count == 1) {
++ hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
++ }
++ else if (hc->multi_count == 2) {
++ hc->data_pid_start = DWC_OTG_HC_PID_DATA1;
++ }
++ else {
++ hc->data_pid_start = DWC_OTG_HC_PID_DATA2;
++ }
++ }
++ else {
++ if (hc->multi_count == 1) {
++ hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
++ }
++ else {
++ hc->data_pid_start = DWC_OTG_HC_PID_MDATA;
++ }
++ }
++ }
++ else {
++ hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
++ }
++ }
++
++ hctsiz.b.xfersize = hc->xfer_len;
++ }
++
++ hc->start_pkt_count = num_packets;
++ hctsiz.b.pktcnt = num_packets;
++ hctsiz.b.pid = hc->data_pid_start;
++ dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
++
++ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
++ DWC_DEBUGPL(DBG_HCDV, " Xfer Size: %d\n", hctsiz.b.xfersize);
++ DWC_DEBUGPL(DBG_HCDV, " Num Pkts: %d\n", hctsiz.b.pktcnt);
++ DWC_DEBUGPL(DBG_HCDV, " Start PID: %d\n", hctsiz.b.pid);
++
++ if (core_if->dma_enable) {
++#if defined (CONFIG_DWC_OTG_HOST_ONLY)
++ if ((uint32_t)hc->xfer_buff & 0x3) {
++ /* non DWORD-aligned buffer case*/
++ if(!hc->qh->dw_align_buf) {
++ hc->qh->dw_align_buf =
++ dma_alloc_coherent(NULL,
++ core_if->core_params->max_transfer_size,
++ &hc->qh->dw_align_buf_dma,
++ GFP_ATOMIC | GFP_DMA);
++ if (!hc->qh->dw_align_buf) {
++
++ DWC_ERROR("%s: Failed to allocate memory to handle "
++ "non-dword aligned buffer case\n", __func__);
++ return;
++ }
++
++ }
++ if (!hc->ep_is_in) {
++ memcpy(hc->qh->dw_align_buf, phys_to_virt((uint32_t)hc->xfer_buff), hc->xfer_len);
++ }
++
++ dwc_write_reg32(&hc_regs->hcdma, hc->qh->dw_align_buf_dma);
++ }
++ else
++#endif
++ dwc_write_reg32(&hc_regs->hcdma, (uint32_t)hc->xfer_buff);
++ }
++
++ /* Start the split */
++ if (hc->do_split) {
++ hcsplt_data_t hcsplt;
++ hcsplt.d32 = dwc_read_reg32 (&hc_regs->hcsplt);
++ hcsplt.b.spltena = 1;
++ dwc_write_reg32(&hc_regs->hcsplt, hcsplt.d32);
++ }
++
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ hcchar.b.multicnt = hc->multi_count;
++ hc_set_even_odd_frame(core_if, hc, &hcchar);
++#ifdef DEBUG
++ core_if->start_hcchar_val[hc->hc_num] = hcchar.d32;
++ if (hcchar.b.chdis) {
++ DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n",
++ __func__, hc->hc_num, hcchar.d32);
++ }
++#endif
++
++ /* Set host channel enable after all other setup is complete. */
++ hcchar.b.chen = 1;
++ hcchar.b.chdis = 0;
++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++
++ hc->xfer_started = 1;
++ hc->requests++;
++
++ if (!core_if->dma_enable &&
++ !hc->ep_is_in && hc->xfer_len > 0) {
++ /* Load OUT packet into the appropriate Tx FIFO. */
++ dwc_otg_hc_write_packet(core_if, hc);
++ }
++
++#ifdef DEBUG
++ /* Start a timer for this transfer. */
++ core_if->hc_xfer_timer[hc->hc_num].function = hc_xfer_timeout;
++ core_if->hc_xfer_info[hc->hc_num].core_if = core_if;
++ core_if->hc_xfer_info[hc->hc_num].hc = hc;
++ core_if->hc_xfer_timer[hc->hc_num].data = (unsigned long)(&core_if->hc_xfer_info[hc->hc_num]);
++ core_if->hc_xfer_timer[hc->hc_num].expires = jiffies + (HZ*10);
++ add_timer(&core_if->hc_xfer_timer[hc->hc_num]);
++#endif
++}
++
++/**
++ * This function continues a data transfer that was started by previous call
++ * to <code>dwc_otg_hc_start_transfer</code>. The caller must ensure there is
++ * sufficient space in the request queue and Tx Data FIFO. This function
++ * should only be called in Slave mode. In DMA mode, the controller acts
++ * autonomously to complete transfers programmed to a host channel.
++ *
++ * For an OUT transfer, a new data packet is loaded into the appropriate FIFO
++ * if there is any data remaining to be queued. For an IN transfer, another
++ * data packet is always requested. For the SETUP phase of a control transfer,
++ * this function does nothing.
++ *
++ * @return 1 if a new request is queued, 0 if no more requests are required
++ * for this transfer.
++ */
++int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
++{
++ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
++
++ if (hc->do_split) {
++ /* SPLITs always queue just once per channel */
++ return 0;
++ }
++ else if (hc->data_pid_start == DWC_OTG_HC_PID_SETUP) {
++ /* SETUPs are queued only once since they can't be NAKed. */
++ return 0;
++ }
++ else if (hc->ep_is_in) {
++ /*
++ * Always queue another request for other IN transfers. If
++ * back-to-back INs are issued and NAKs are received for both,
++ * the driver may still be processing the first NAK when the
++ * second NAK is received. When the interrupt handler clears
++ * the NAK interrupt for the first NAK, the second NAK will
++ * not be seen. So we can't depend on the NAK interrupt
++ * handler to requeue a NAKed request. Instead, IN requests
++ * are issued each time this function is called. When the
++ * transfer completes, the extra requests for the channel will
++ * be flushed.
++ */
++ hcchar_data_t hcchar;
++ dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num];
++
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ hc_set_even_odd_frame(core_if, hc, &hcchar);
++ hcchar.b.chen = 1;
++ hcchar.b.chdis = 0;
++ DWC_DEBUGPL(DBG_HCDV, " IN xfer: hcchar = 0x%08x\n", hcchar.d32);
++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++ hc->requests++;
++ return 1;
++ }
++ else {
++ /* OUT transfers. */
++ if (hc->xfer_count < hc->xfer_len) {
++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++ hcchar_data_t hcchar;
++ dwc_otg_hc_regs_t *hc_regs;
++ hc_regs = core_if->host_if->hc_regs[hc->hc_num];
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ hc_set_even_odd_frame(core_if, hc, &hcchar);
++ }
++
++ /* Load OUT packet into the appropriate Tx FIFO. */
++ dwc_otg_hc_write_packet(core_if, hc);
++ hc->requests++;
++ return 1;
++ }
++ else {
++ return 0;
++ }
++ }
++}
++
++/**
++ * Starts a PING transfer. This function should only be called in Slave mode.
++ * The Do Ping bit is set in the HCTSIZ register, then the channel is enabled.
++ */
++void dwc_otg_hc_do_ping(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
++{
++ hcchar_data_t hcchar;
++ hctsiz_data_t hctsiz;
++ dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num];
++
++ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
++
++ hctsiz.d32 = 0;
++ hctsiz.b.dopng = 1;
++ hctsiz.b.pktcnt = 1;
++ dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
++
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ hcchar.b.chen = 1;
++ hcchar.b.chdis = 0;
++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++}
++
++/*
++ * This function writes a packet into the Tx FIFO associated with the Host
++ * Channel. For a channel associated with a non-periodic EP, the non-periodic
++ * Tx FIFO is written. For a channel associated with a periodic EP, the
++ * periodic Tx FIFO is written. This function should only be called in Slave
++ * mode.
++ *
++ * Upon return the xfer_buff and xfer_count fields in _hc are incremented by
++ * then number of bytes written to the Tx FIFO.
++ */
++void dwc_otg_hc_write_packet(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
++{
++ uint32_t i;
++ uint32_t remaining_count;
++ uint32_t byte_count;
++ uint32_t dword_count;
++
++ uint32_t *data_buff = (uint32_t *)(hc->xfer_buff);
++ uint32_t *data_fifo = core_if->data_fifo[hc->hc_num];
++
++ remaining_count = hc->xfer_len - hc->xfer_count;
++ if (remaining_count > hc->max_packet) {
++ byte_count = hc->max_packet;
++ }
++ else {
++ byte_count = remaining_count;
++ }
++
++ dword_count = (byte_count + 3) / 4;
++
++ if ((((unsigned long)data_buff) & 0x3) == 0) {
++ /* xfer_buff is DWORD aligned. */
++ for (i = 0; i < dword_count; i++, data_buff++)
++ {
++ dwc_write_reg32(data_fifo, *data_buff);
++ }
++ }
++ else {
++ /* xfer_buff is not DWORD aligned. */
++ for (i = 0; i < dword_count; i++, data_buff++)
++ {
++ dwc_write_reg32(data_fifo, get_unaligned(data_buff));
++ }
++ }
++
++ hc->xfer_count += byte_count;
++ hc->xfer_buff += byte_count;
++}
++
++/**
++ * Gets the current USB frame number. This is the frame number from the last
++ * SOF packet.
++ */
++uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t *core_if)
++{
++ dsts_data_t dsts;
++ dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
++
++ /* read current frame/microframe number from DSTS register */
++ return dsts.b.soffn;
++}
++
++/**
++ * This function reads a setup packet from the Rx FIFO into the destination
++ * buffer. This function is called from the Rx Status Queue Level (RxStsQLvl)
++ * Interrupt routine when a SETUP packet has been received in Slave mode.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param dest Destination buffer for packet data.
++ */
++void dwc_otg_read_setup_packet(dwc_otg_core_if_t *core_if, uint32_t *dest)
++{
++ /* Get the 8 bytes of a setup transaction data */
++
++ /* Pop 2 DWORDS off the receive data FIFO into memory */
++ dest[0] = dwc_read_reg32(core_if->data_fifo[0]);
++ dest[1] = dwc_read_reg32(core_if->data_fifo[0]);
++}
++
++
++/**
++ * This function enables EP0 OUT to receive SETUP packets and configures EP0
++ * IN for transmitting packets. It is normally called when the
++ * "Enumeration Done" interrupt occurs.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP0 data.
++ */
++void dwc_otg_ep0_activate(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++ dsts_data_t dsts;
++ depctl_data_t diepctl;
++ depctl_data_t doepctl;
++ dctl_data_t dctl = { .d32 = 0 };
++
++ /* Read the Device Status and Endpoint 0 Control registers */
++ dsts.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dsts);
++ diepctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl);
++ doepctl.d32 = dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl);
++
++ /* Set the MPS of the IN EP based on the enumeration speed */
++ switch (dsts.b.enumspd) {
++ case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ:
++ case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ:
++ case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ:
++ diepctl.b.mps = DWC_DEP0CTL_MPS_64;
++ break;
++ case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ:
++ diepctl.b.mps = DWC_DEP0CTL_MPS_8;
++ break;
++ }
++
++ dwc_write_reg32(&dev_if->in_ep_regs[0]->diepctl, diepctl.d32);
++
++ /* Enable OUT EP for receive */
++ doepctl.b.epena = 1;
++ dwc_write_reg32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32);
++
++#ifdef VERBOSE
++ DWC_DEBUGPL(DBG_PCDV,"doepctl0=%0x\n",
++ dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl));
++ DWC_DEBUGPL(DBG_PCDV,"diepctl0=%0x\n",
++ dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl));
++#endif
++ dctl.b.cgnpinnak = 1;
++
++ dwc_modify_reg32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32);
++ DWC_DEBUGPL(DBG_PCDV,"dctl=%0x\n",
++ dwc_read_reg32(&dev_if->dev_global_regs->dctl));
++}
++
++/**
++ * This function activates an EP. The Device EP control register for
++ * the EP is configured as defined in the ep structure. Note: This
++ * function is not used for EP0.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to activate.
++ */
++void dwc_otg_ep_activate(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++ depctl_data_t depctl;
++ volatile uint32_t *addr;
++ daint_data_t daintmsk = { .d32 = 0 };
++
++ DWC_DEBUGPL(DBG_PCDV, "%s() EP%d-%s\n", __func__, ep->num,
++ (ep->is_in?"IN":"OUT"));
++
++ /* Read DEPCTLn register */
++ if (ep->is_in == 1) {
++ addr = &dev_if->in_ep_regs[ep->num]->diepctl;
++ daintmsk.ep.in = 1<<ep->num;
++ }
++ else {
++ addr = &dev_if->out_ep_regs[ep->num]->doepctl;
++ daintmsk.ep.out = 1<<ep->num;
++ }
++
++ /* If the EP is already active don't change the EP Control
++ * register. */
++ depctl.d32 = dwc_read_reg32(addr);
++ if (!depctl.b.usbactep) {
++ depctl.b.mps = ep->maxpacket;
++ depctl.b.eptype = ep->type;
++ depctl.b.txfnum = ep->tx_fifo_num;
++
++ if (ep->type == DWC_OTG_EP_TYPE_ISOC) {
++ depctl.b.setd0pid = 1; // ???
++ }
++ else {
++ depctl.b.setd0pid = 1;
++ }
++ depctl.b.usbactep = 1;
++
++ dwc_write_reg32(addr, depctl.d32);
++ DWC_DEBUGPL(DBG_PCDV,"DEPCTL=%08x\n", dwc_read_reg32(addr));
++ }
++
++ /* Enable the Interrupt for this EP */
++ if(core_if->multiproc_int_enable) {
++ if (ep->is_in == 1) {
++ diepmsk_data_t diepmsk = { .d32 = 0};
++ diepmsk.b.xfercompl = 1;
++ diepmsk.b.timeout = 1;
++ diepmsk.b.epdisabled = 1;
++ diepmsk.b.ahberr = 1;
++ diepmsk.b.intknepmis = 1;
++ diepmsk.b.txfifoundrn = 1; //?????
++
++
++ if(core_if->dma_desc_enable) {
++ diepmsk.b.bna = 1;
++ }
++/*
++ if(core_if->dma_enable) {
++ doepmsk.b.nak = 1;
++ }
++*/
++ dwc_write_reg32(&dev_if->dev_global_regs->diepeachintmsk[ep->num], diepmsk.d32);
++
++ } else {
++ doepmsk_data_t doepmsk = { .d32 = 0};
++ doepmsk.b.xfercompl = 1;
++ doepmsk.b.ahberr = 1;
++ doepmsk.b.epdisabled = 1;
++
++
++ if(core_if->dma_desc_enable) {
++ doepmsk.b.bna = 1;
++ }
++/*
++ doepmsk.b.babble = 1;
++ doepmsk.b.nyet = 1;
++ doepmsk.b.nak = 1;
++*/
++ dwc_write_reg32(&dev_if->dev_global_regs->doepeachintmsk[ep->num], doepmsk.d32);
++ }
++ dwc_modify_reg32(&dev_if->dev_global_regs->deachintmsk,
++ 0, daintmsk.d32);
++ } else {
++ dwc_modify_reg32(&dev_if->dev_global_regs->daintmsk,
++ 0, daintmsk.d32);
++ }
++
++ DWC_DEBUGPL(DBG_PCDV,"DAINTMSK=%0x\n",
++ dwc_read_reg32(&dev_if->dev_global_regs->daintmsk));
++
++ ep->stall_clear_flag = 0;
++ return;
++}
++
++/**
++ * This function deactivates an EP. This is done by clearing the USB Active
++ * EP bit in the Device EP control register. Note: This function is not used
++ * for EP0. EP0 cannot be deactivated.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to deactivate.
++ */
++void dwc_otg_ep_deactivate(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++ depctl_data_t depctl = { .d32 = 0 };
++ volatile uint32_t *addr;
++ daint_data_t daintmsk = { .d32 = 0};
++
++ /* Read DEPCTLn register */
++ if (ep->is_in == 1) {
++ addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
++ daintmsk.ep.in = 1<<ep->num;
++ }
++ else {
++ addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
++ daintmsk.ep.out = 1<<ep->num;
++ }
++
++ depctl.b.usbactep = 0;
++
++ if(core_if->dma_desc_enable)
++ depctl.b.epdis = 1;
++
++ dwc_write_reg32(addr, depctl.d32);
++
++ /* Disable the Interrupt for this EP */
++ if(core_if->multiproc_int_enable) {
++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->deachintmsk,
++ daintmsk.d32, 0);
++
++ if (ep->is_in == 1) {
++ dwc_write_reg32(&core_if->dev_if->dev_global_regs->diepeachintmsk[ep->num], 0);
++ } else {
++ dwc_write_reg32(&core_if->dev_if->dev_global_regs->doepeachintmsk[ep->num], 0);
++ }
++ } else {
++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->daintmsk,
++ daintmsk.d32, 0);
++ }
++}
++
++/**
++ * This function does the setup for a data transfer for an EP and
++ * starts the transfer. For an IN transfer, the packets will be
++ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers,
++ * the packets are unloaded from the Rx FIFO in the ISR. the ISR.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ */
++static void init_dma_desc_chain(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++ dwc_otg_dma_desc_t* dma_desc;
++ uint32_t offset;
++ uint32_t xfer_est;
++ int i;
++
++ ep->desc_cnt = ( ep->total_len / ep->maxxfer) +
++ ((ep->total_len % ep->maxxfer) ? 1 : 0);
++ if(!ep->desc_cnt)
++ ep->desc_cnt = 1;
++
++ dma_desc = ep->desc_addr;
++ xfer_est = ep->total_len;
++ offset = 0;
++ for( i = 0; i < ep->desc_cnt; ++i) {
++ /** DMA Descriptor Setup */
++ if(xfer_est > ep->maxxfer) {
++ dma_desc->status.b.bs = BS_HOST_BUSY;
++ dma_desc->status.b.l = 0;
++ dma_desc->status.b.ioc = 0;
++ dma_desc->status.b.sp = 0;
++ dma_desc->status.b.bytes = ep->maxxfer;
++ dma_desc->buf = ep->dma_addr + offset;
++ dma_desc->status.b.bs = BS_HOST_READY;
++
++ xfer_est -= ep->maxxfer;
++ offset += ep->maxxfer;
++ } else {
++ dma_desc->status.b.bs = BS_HOST_BUSY;
++ dma_desc->status.b.l = 1;
++ dma_desc->status.b.ioc = 1;
++ if(ep->is_in) {
++ dma_desc->status.b.sp = (xfer_est % ep->maxpacket) ?
++ 1 : ((ep->sent_zlp) ? 1 : 0);
++ dma_desc->status.b.bytes = xfer_est;
++ } else {
++ dma_desc->status.b.bytes = xfer_est + ((4 - (xfer_est & 0x3)) & 0x3) ;
++ }
++
++ dma_desc->buf = ep->dma_addr + offset;
++ dma_desc->status.b.bs = BS_HOST_READY;
++ }
++ dma_desc ++;
++ }
++}
++
++/**
++ * This function does the setup for a data transfer for an EP and
++ * starts the transfer. For an IN transfer, the packets will be
++ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers,
++ * the packets are unloaded from the Rx FIFO in the ISR. the ISR.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ */
++
++void dwc_otg_ep_start_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++ depctl_data_t depctl;
++ deptsiz_data_t deptsiz;
++ gintmsk_data_t intr_mask = { .d32 = 0};
++
++ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__);
++
++ DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d "
++ "xfer_buff=%p start_xfer_buff=%p\n",
++ ep->num, (ep->is_in?"IN":"OUT"), ep->xfer_len,
++ ep->xfer_count, ep->xfer_buff, ep->start_xfer_buff);
++
++ /* IN endpoint */
++ if (ep->is_in == 1) {
++ dwc_otg_dev_in_ep_regs_t *in_regs =
++ core_if->dev_if->in_ep_regs[ep->num];
++
++ gnptxsts_data_t gtxstatus;
++
++ gtxstatus.d32 =
++ dwc_read_reg32(&core_if->core_global_regs->gnptxsts);
++
++ if(core_if->en_multiple_tx_fifo == 0 && gtxstatus.b.nptxqspcavail == 0) {
++#ifdef DEBUG
++ DWC_PRINT("TX Queue Full (0x%0x)\n", gtxstatus.d32);
++#endif
++ return;
++ }
++
++ depctl.d32 = dwc_read_reg32(&(in_regs->diepctl));
++ deptsiz.d32 = dwc_read_reg32(&(in_regs->dieptsiz));
++
++ ep->xfer_len += (ep->maxxfer < (ep->total_len - ep->xfer_len)) ?
++ ep->maxxfer : (ep->total_len - ep->xfer_len);
++
++ /* Zero Length Packet? */
++ if ((ep->xfer_len - ep->xfer_count) == 0) {
++ deptsiz.b.xfersize = 0;
++ deptsiz.b.pktcnt = 1;
++ }
++ else {
++ /* Program the transfer size and packet count
++ * as follows: xfersize = N * maxpacket +
++ * short_packet pktcnt = N + (short_packet
++ * exist ? 1 : 0)
++ */
++ deptsiz.b.xfersize = ep->xfer_len - ep->xfer_count;
++ deptsiz.b.pktcnt =
++ (ep->xfer_len - ep->xfer_count - 1 + ep->maxpacket) /
++ ep->maxpacket;
++ }
++
++
++ /* Write the DMA register */
++ if (core_if->dma_enable) {
++ if (core_if->dma_desc_enable == 0) {
++ dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
++ dwc_write_reg32 (&(in_regs->diepdma),
++ (uint32_t)ep->dma_addr);
++ }
++ else {
++ init_dma_desc_chain(core_if, ep);
++ /** DIEPDMAn Register write */
++ dwc_write_reg32(&in_regs->diepdma, ep->dma_desc_addr);
++ }
++ }
++ else {
++ dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
++ if(ep->type != DWC_OTG_EP_TYPE_ISOC) {
++ /**
++ * Enable the Non-Periodic Tx FIFO empty interrupt,
++ * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode,
++ * the data will be written into the fifo by the ISR.
++ */
++ if(core_if->en_multiple_tx_fifo == 0) {
++ intr_mask.b.nptxfempty = 1;
++ dwc_modify_reg32(&core_if->core_global_regs->gintmsk,
++ intr_mask.d32, intr_mask.d32);
++ }
++ else {
++ /* Enable the Tx FIFO Empty Interrupt for this EP */
++ if(ep->xfer_len > 0) {
++ uint32_t fifoemptymsk = 0;
++ fifoemptymsk = 1 << ep->num;
++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
++ 0, fifoemptymsk);
++
++ }
++ }
++ }
++ }
++
++ /* EP enable, IN data in FIFO */
++ depctl.b.cnak = 1;
++ depctl.b.epena = 1;
++ dwc_write_reg32(&in_regs->diepctl, depctl.d32);
++
++ depctl.d32 = dwc_read_reg32 (&core_if->dev_if->in_ep_regs[0]->diepctl);
++ depctl.b.nextep = ep->num;
++ dwc_write_reg32 (&core_if->dev_if->in_ep_regs[0]->diepctl, depctl.d32);
++
++ }
++ else {
++ /* OUT endpoint */
++ dwc_otg_dev_out_ep_regs_t *out_regs =
++ core_if->dev_if->out_ep_regs[ep->num];
++
++ depctl.d32 = dwc_read_reg32(&(out_regs->doepctl));
++ deptsiz.d32 = dwc_read_reg32(&(out_regs->doeptsiz));
++
++ ep->xfer_len += (ep->maxxfer < (ep->total_len - ep->xfer_len)) ?
++ ep->maxxfer : (ep->total_len - ep->xfer_len);
++
++ /* Program the transfer size and packet count as follows:
++ *
++ * pktcnt = N
++ * xfersize = N * maxpacket
++ */
++ if ((ep->xfer_len - ep->xfer_count) == 0) {
++ /* Zero Length Packet */
++ deptsiz.b.xfersize = ep->maxpacket;
++ deptsiz.b.pktcnt = 1;
++ }
++ else {
++ deptsiz.b.pktcnt =
++ (ep->xfer_len - ep->xfer_count + (ep->maxpacket - 1)) /
++ ep->maxpacket;
++ ep->xfer_len = deptsiz.b.pktcnt * ep->maxpacket + ep->xfer_count;
++ deptsiz.b.xfersize = ep->xfer_len - ep->xfer_count;
++ }
++
++ DWC_DEBUGPL(DBG_PCDV, "ep%d xfersize=%d pktcnt=%d\n",
++ ep->num,
++ deptsiz.b.xfersize, deptsiz.b.pktcnt);
++
++ if (core_if->dma_enable) {
++ if (!core_if->dma_desc_enable) {
++ dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
++
++ dwc_write_reg32 (&(out_regs->doepdma),
++ (uint32_t)ep->dma_addr);
++ }
++ else {
++ init_dma_desc_chain(core_if, ep);
++
++ /** DOEPDMAn Register write */
++ dwc_write_reg32(&out_regs->doepdma, ep->dma_desc_addr);
++ }
++ }
++ else {
++ dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
++ }
++
++ /* EP enable */
++ depctl.b.cnak = 1;
++ depctl.b.epena = 1;
++
++ dwc_write_reg32(&out_regs->doepctl, depctl.d32);
++
++ DWC_DEBUGPL(DBG_PCD, "DOEPCTL=%08x DOEPTSIZ=%08x\n",
++ dwc_read_reg32(&out_regs->doepctl),
++ dwc_read_reg32(&out_regs->doeptsiz));
++ DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n",
++ dwc_read_reg32(&core_if->dev_if->dev_global_regs->daintmsk),
++ dwc_read_reg32(&core_if->core_global_regs->gintmsk));
++ }
++}
++
++/**
++ * This function setup a zero length transfer in Buffer DMA and
++ * Slave modes for usb requests with zero field set
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ *
++ */
++void dwc_otg_ep_start_zl_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++
++ depctl_data_t depctl;
++ deptsiz_data_t deptsiz;
++ gintmsk_data_t intr_mask = { .d32 = 0};
++
++ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__);
++
++ /* IN endpoint */
++ if (ep->is_in == 1) {
++ dwc_otg_dev_in_ep_regs_t *in_regs =
++ core_if->dev_if->in_ep_regs[ep->num];
++
++ depctl.d32 = dwc_read_reg32(&(in_regs->diepctl));
++ deptsiz.d32 = dwc_read_reg32(&(in_regs->dieptsiz));
++
++ deptsiz.b.xfersize = 0;
++ deptsiz.b.pktcnt = 1;
++
++
++ /* Write the DMA register */
++ if (core_if->dma_enable) {
++ if (core_if->dma_desc_enable == 0) {
++ dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
++ dwc_write_reg32 (&(in_regs->diepdma),
++ (uint32_t)ep->dma_addr);
++ }
++ }
++ else {
++ dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
++ /**
++ * Enable the Non-Periodic Tx FIFO empty interrupt,
++ * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode,
++ * the data will be written into the fifo by the ISR.
++ */
++ if(core_if->en_multiple_tx_fifo == 0) {
++ intr_mask.b.nptxfempty = 1;
++ dwc_modify_reg32(&core_if->core_global_regs->gintmsk,
++ intr_mask.d32, intr_mask.d32);
++ }
++ else {
++ /* Enable the Tx FIFO Empty Interrupt for this EP */
++ if(ep->xfer_len > 0) {
++ uint32_t fifoemptymsk = 0;
++ fifoemptymsk = 1 << ep->num;
++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
++ 0, fifoemptymsk);
++ }
++ }
++ }
++
++ /* EP enable, IN data in FIFO */
++ depctl.b.cnak = 1;
++ depctl.b.epena = 1;
++ dwc_write_reg32(&in_regs->diepctl, depctl.d32);
++
++ depctl.d32 = dwc_read_reg32 (&core_if->dev_if->in_ep_regs[0]->diepctl);
++ depctl.b.nextep = ep->num;
++ dwc_write_reg32 (&core_if->dev_if->in_ep_regs[0]->diepctl, depctl.d32);
++
++ }
++ else {
++ /* OUT endpoint */
++ dwc_otg_dev_out_ep_regs_t *out_regs =
++ core_if->dev_if->out_ep_regs[ep->num];
++
++ depctl.d32 = dwc_read_reg32(&(out_regs->doepctl));
++ deptsiz.d32 = dwc_read_reg32(&(out_regs->doeptsiz));
++
++ /* Zero Length Packet */
++ deptsiz.b.xfersize = ep->maxpacket;
++ deptsiz.b.pktcnt = 1;
++
++ if (core_if->dma_enable) {
++ if (!core_if->dma_desc_enable) {
++ dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
++
++ dwc_write_reg32 (&(out_regs->doepdma),
++ (uint32_t)ep->dma_addr);
++ }
++ }
++ else {
++ dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
++ }
++
++ /* EP enable */
++ depctl.b.cnak = 1;
++ depctl.b.epena = 1;
++
++ dwc_write_reg32(&out_regs->doepctl, depctl.d32);
++
++ }
++}
++
++/**
++ * This function does the setup for a data transfer for EP0 and starts
++ * the transfer. For an IN transfer, the packets will be loaded into
++ * the appropriate Tx FIFO in the ISR. For OUT transfers, the packets are
++ * unloaded from the Rx FIFO in the ISR.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP0 data.
++ */
++void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++ depctl_data_t depctl;
++ deptsiz0_data_t deptsiz;
++ gintmsk_data_t intr_mask = { .d32 = 0};
++ dwc_otg_dma_desc_t* dma_desc;
++
++ DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d "
++ "xfer_buff=%p start_xfer_buff=%p \n",
++ ep->num, (ep->is_in?"IN":"OUT"), ep->xfer_len,
++ ep->xfer_count, ep->xfer_buff, ep->start_xfer_buff);
++
++ ep->total_len = ep->xfer_len;
++
++ /* IN endpoint */
++ if (ep->is_in == 1) {
++ dwc_otg_dev_in_ep_regs_t *in_regs =
++ core_if->dev_if->in_ep_regs[0];
++
++ gnptxsts_data_t gtxstatus;
++
++ gtxstatus.d32 =
++ dwc_read_reg32(&core_if->core_global_regs->gnptxsts);
++
++ if(core_if->en_multiple_tx_fifo == 0 && gtxstatus.b.nptxqspcavail == 0) {
++#ifdef DEBUG
++ deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz);
++ DWC_DEBUGPL(DBG_PCD,"DIEPCTL0=%0x\n",
++ dwc_read_reg32(&in_regs->diepctl));
++ DWC_DEBUGPL(DBG_PCD, "DIEPTSIZ0=%0x (sz=%d, pcnt=%d)\n",
++ deptsiz.d32,
++ deptsiz.b.xfersize, deptsiz.b.pktcnt);
++ DWC_PRINT("TX Queue or FIFO Full (0x%0x)\n",
++ gtxstatus.d32);
++#endif
++ return;
++ }
++
++
++ depctl.d32 = dwc_read_reg32(&in_regs->diepctl);
++ deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz);
++
++ /* Zero Length Packet? */
++ if (ep->xfer_len == 0) {
++ deptsiz.b.xfersize = 0;
++ deptsiz.b.pktcnt = 1;
++ }
++ else {
++ /* Program the transfer size and packet count
++ * as follows: xfersize = N * maxpacket +
++ * short_packet pktcnt = N + (short_packet
++ * exist ? 1 : 0)
++ */
++ if (ep->xfer_len > ep->maxpacket) {
++ ep->xfer_len = ep->maxpacket;
++ deptsiz.b.xfersize = ep->maxpacket;
++ }
++ else {
++ deptsiz.b.xfersize = ep->xfer_len;
++ }
++ deptsiz.b.pktcnt = 1;
++
++ }
++ DWC_DEBUGPL(DBG_PCDV, "IN len=%d xfersize=%d pktcnt=%d [%08x]\n",
++ ep->xfer_len,
++ deptsiz.b.xfersize, deptsiz.b.pktcnt, deptsiz.d32);
++
++ /* Write the DMA register */
++ if (core_if->dma_enable) {
++ if(core_if->dma_desc_enable == 0) {
++ dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
++
++ dwc_write_reg32 (&(in_regs->diepdma),
++ (uint32_t)ep->dma_addr);
++ }
++ else {
++ dma_desc = core_if->dev_if->in_desc_addr;
++
++ /** DMA Descriptor Setup */
++ dma_desc->status.b.bs = BS_HOST_BUSY;
++ dma_desc->status.b.l = 1;
++ dma_desc->status.b.ioc = 1;
++ dma_desc->status.b.sp = (ep->xfer_len == ep->maxpacket) ? 0 : 1;
++ dma_desc->status.b.bytes = ep->xfer_len;
++ dma_desc->buf = ep->dma_addr;
++ dma_desc->status.b.bs = BS_HOST_READY;
++
++ /** DIEPDMA0 Register write */
++ dwc_write_reg32(&in_regs->diepdma, core_if->dev_if->dma_in_desc_addr);
++ }
++ }
++ else {
++ dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
++ }
++
++ /* EP enable, IN data in FIFO */
++ depctl.b.cnak = 1;
++ depctl.b.epena = 1;
++ dwc_write_reg32(&in_regs->diepctl, depctl.d32);
++
++ /**
++ * Enable the Non-Periodic Tx FIFO empty interrupt, the
++ * data will be written into the fifo by the ISR.
++ */
++ if (!core_if->dma_enable) {
++ if(core_if->en_multiple_tx_fifo == 0) {
++ intr_mask.b.nptxfempty = 1;
++ dwc_modify_reg32(&core_if->core_global_regs->gintmsk,
++ intr_mask.d32, intr_mask.d32);
++ }
++ else {
++ /* Enable the Tx FIFO Empty Interrupt for this EP */
++ if(ep->xfer_len > 0) {
++ uint32_t fifoemptymsk = 0;
++ fifoemptymsk |= 1 << ep->num;
++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
++ 0, fifoemptymsk);
++ }
++ }
++ }
++ }
++ else {
++ /* OUT endpoint */
++ dwc_otg_dev_out_ep_regs_t *out_regs =
++ core_if->dev_if->out_ep_regs[0];
++
++ depctl.d32 = dwc_read_reg32(&out_regs->doepctl);
++ deptsiz.d32 = dwc_read_reg32(&out_regs->doeptsiz);
++
++ /* Program the transfer size and packet count as follows:
++ * xfersize = N * (maxpacket + 4 - (maxpacket % 4))
++ * pktcnt = N */
++ /* Zero Length Packet */
++ deptsiz.b.xfersize = ep->maxpacket;
++ deptsiz.b.pktcnt = 1;
++
++ DWC_DEBUGPL(DBG_PCDV, "len=%d xfersize=%d pktcnt=%d\n",
++ ep->xfer_len,
++ deptsiz.b.xfersize, deptsiz.b.pktcnt);
++
++ if (core_if->dma_enable) {
++ if(!core_if->dma_desc_enable) {
++ dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
++
++ dwc_write_reg32 (&(out_regs->doepdma),
++ (uint32_t)ep->dma_addr);
++ }
++ else {
++ dma_desc = core_if->dev_if->out_desc_addr;
++
++ /** DMA Descriptor Setup */
++ dma_desc->status.b.bs = BS_HOST_BUSY;
++ dma_desc->status.b.l = 1;
++ dma_desc->status.b.ioc = 1;
++ dma_desc->status.b.bytes = ep->maxpacket;
++ dma_desc->buf = ep->dma_addr;
++ dma_desc->status.b.bs = BS_HOST_READY;
++
++ /** DOEPDMA0 Register write */
++ dwc_write_reg32(&out_regs->doepdma, core_if->dev_if->dma_out_desc_addr);
++ }
++ }
++ else {
++ dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
++ }
++
++ /* EP enable */
++ depctl.b.cnak = 1;
++ depctl.b.epena = 1;
++ dwc_write_reg32 (&(out_regs->doepctl), depctl.d32);
++ }
++}
++
++/**
++ * This function continues control IN transfers started by
++ * dwc_otg_ep0_start_transfer, when the transfer does not fit in a
++ * single packet. NOTE: The DIEPCTL0/DOEPCTL0 registers only have one
++ * bit for the packet count.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP0 data.
++ */
++void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++ depctl_data_t depctl;
++ deptsiz0_data_t deptsiz;
++ gintmsk_data_t intr_mask = { .d32 = 0};
++ dwc_otg_dma_desc_t* dma_desc;
++
++ if (ep->is_in == 1) {
++ dwc_otg_dev_in_ep_regs_t *in_regs =
++ core_if->dev_if->in_ep_regs[0];
++ gnptxsts_data_t tx_status = { .d32 = 0 };
++
++ tx_status.d32 = dwc_read_reg32(&core_if->core_global_regs->gnptxsts);
++ /** @todo Should there be check for room in the Tx
++ * Status Queue. If not remove the code above this comment. */
++
++ depctl.d32 = dwc_read_reg32(&in_regs->diepctl);
++ deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz);
++
++ /* Program the transfer size and packet count
++ * as follows: xfersize = N * maxpacket +
++ * short_packet pktcnt = N + (short_packet
++ * exist ? 1 : 0)
++ */
++
++
++ if(core_if->dma_desc_enable == 0) {
++ deptsiz.b.xfersize = (ep->total_len - ep->xfer_count) > ep->maxpacket ? ep->maxpacket :
++ (ep->total_len - ep->xfer_count);
++ deptsiz.b.pktcnt = 1;
++ if(core_if->dma_enable == 0) {
++ ep->xfer_len += deptsiz.b.xfersize;
++ } else {
++ ep->xfer_len = deptsiz.b.xfersize;
++ }
++ dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
++ }
++ else {
++ ep->xfer_len = (ep->total_len - ep->xfer_count) > ep->maxpacket ? ep->maxpacket :
++ (ep->total_len - ep->xfer_count);
++
++ dma_desc = core_if->dev_if->in_desc_addr;
++
++ /** DMA Descriptor Setup */
++ dma_desc->status.b.bs = BS_HOST_BUSY;
++ dma_desc->status.b.l = 1;
++ dma_desc->status.b.ioc = 1;
++ dma_desc->status.b.sp = (ep->xfer_len == ep->maxpacket) ? 0 : 1;
++ dma_desc->status.b.bytes = ep->xfer_len;
++ dma_desc->buf = ep->dma_addr;
++ dma_desc->status.b.bs = BS_HOST_READY;
++
++ /** DIEPDMA0 Register write */
++ dwc_write_reg32(&in_regs->diepdma, core_if->dev_if->dma_in_desc_addr);
++ }
++
++
++ DWC_DEBUGPL(DBG_PCDV, "IN len=%d xfersize=%d pktcnt=%d [%08x]\n",
++ ep->xfer_len,
++ deptsiz.b.xfersize, deptsiz.b.pktcnt, deptsiz.d32);
++
++ /* Write the DMA register */
++ if (core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) {
++ if(core_if->dma_desc_enable == 0)
++ dwc_write_reg32 (&(in_regs->diepdma), (uint32_t)ep->dma_addr);
++ }
++
++ /* EP enable, IN data in FIFO */
++ depctl.b.cnak = 1;
++ depctl.b.epena = 1;
++ dwc_write_reg32(&in_regs->diepctl, depctl.d32);
++
++ /**
++ * Enable the Non-Periodic Tx FIFO empty interrupt, the
++ * data will be written into the fifo by the ISR.
++ */
++ if (!core_if->dma_enable) {
++ if(core_if->en_multiple_tx_fifo == 0) {
++ /* First clear it from GINTSTS */
++ intr_mask.b.nptxfempty = 1;
++ dwc_modify_reg32(&core_if->core_global_regs->gintmsk,
++ intr_mask.d32, intr_mask.d32);
++
++ }
++ else {
++ /* Enable the Tx FIFO Empty Interrupt for this EP */
++ if(ep->xfer_len > 0) {
++ uint32_t fifoemptymsk = 0;
++ fifoemptymsk |= 1 << ep->num;
++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
++ 0, fifoemptymsk);
++ }
++ }
++ }
++ }
++ else {
++ dwc_otg_dev_out_ep_regs_t *out_regs =
++ core_if->dev_if->out_ep_regs[0];
++
++
++ depctl.d32 = dwc_read_reg32(&out_regs->doepctl);
++ deptsiz.d32 = dwc_read_reg32(&out_regs->doeptsiz);
++
++ /* Program the transfer size and packet count
++ * as follows: xfersize = N * maxpacket +
++ * short_packet pktcnt = N + (short_packet
++ * exist ? 1 : 0)
++ */
++ deptsiz.b.xfersize = ep->maxpacket;
++ deptsiz.b.pktcnt = 1;
++
++
++ if(core_if->dma_desc_enable == 0) {
++ dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
++ }
++ else {
++ dma_desc = core_if->dev_if->out_desc_addr;
++
++ /** DMA Descriptor Setup */
++ dma_desc->status.b.bs = BS_HOST_BUSY;
++ dma_desc->status.b.l = 1;
++ dma_desc->status.b.ioc = 1;
++ dma_desc->status.b.bytes = ep->maxpacket;
++ dma_desc->buf = ep->dma_addr;
++ dma_desc->status.b.bs = BS_HOST_READY;
++
++ /** DOEPDMA0 Register write */
++ dwc_write_reg32(&out_regs->doepdma, core_if->dev_if->dma_out_desc_addr);
++ }
++
++
++ DWC_DEBUGPL(DBG_PCDV, "IN len=%d xfersize=%d pktcnt=%d [%08x]\n",
++ ep->xfer_len,
++ deptsiz.b.xfersize, deptsiz.b.pktcnt, deptsiz.d32);
++
++ /* Write the DMA register */
++ if (core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) {
++ if(core_if->dma_desc_enable == 0)
++ dwc_write_reg32 (&(out_regs->doepdma), (uint32_t)ep->dma_addr);
++ }
++
++ /* EP enable, IN data in FIFO */
++ depctl.b.cnak = 1;
++ depctl.b.epena = 1;
++ dwc_write_reg32(&out_regs->doepctl, depctl.d32);
++
++ }
++}
++
++#ifdef DEBUG
++void dump_msg(const u8 *buf, unsigned int length)
++{
++ unsigned int start, num, i;
++ char line[52], *p;
++
++ if (length >= 512)
++ return;
++ start = 0;
++ while (length > 0) {
++ num = min(length, 16u);
++ p = line;
++ for (i = 0; i < num; ++i)
++ {
++ if (i == 8)
++ *p++ = ' ';
++ sprintf(p, " %02x", buf[i]);
++ p += 3;
++ }
++ *p = 0;
++ DWC_PRINT("%6x: %s\n", start, line);
++ buf += num;
++ start += num;
++ length -= num;
++ }
++}
++#else
++static inline void dump_msg(const u8 *buf, unsigned int length)
++{
++}
++#endif
++
++/**
++ * This function writes a packet into the Tx FIFO associated with the
++ * EP. For non-periodic EPs the non-periodic Tx FIFO is written. For
++ * periodic EPs the periodic Tx FIFO associated with the EP is written
++ * with all packets for the next micro-frame.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to write packet for.
++ * @param dma Indicates if DMA is being used.
++ */
++void dwc_otg_ep_write_packet(dwc_otg_core_if_t *core_if, dwc_ep_t *ep, int dma)
++{
++ /**
++ * The buffer is padded to DWORD on a per packet basis in
++ * slave/dma mode if the MPS is not DWORD aligned. The last
++ * packet, if short, is also padded to a multiple of DWORD.
++ *
++ * ep->xfer_buff always starts DWORD aligned in memory and is a
++ * multiple of DWORD in length
++ *
++ * ep->xfer_len can be any number of bytes
++ *
++ * ep->xfer_count is a multiple of ep->maxpacket until the last
++ * packet
++ *
++ * FIFO access is DWORD */
++
++ uint32_t i;
++ uint32_t byte_count;
++ uint32_t dword_count;
++ uint32_t *fifo;
++ uint32_t *data_buff = (uint32_t *)ep->xfer_buff;
++
++ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p)\n", __func__, core_if, ep);
++ if (ep->xfer_count >= ep->xfer_len) {
++ DWC_WARN("%s() No data for EP%d!!!\n", __func__, ep->num);
++ return;
++ }
++
++ /* Find the byte length of the packet either short packet or MPS */
++ if ((ep->xfer_len - ep->xfer_count) < ep->maxpacket) {
++ byte_count = ep->xfer_len - ep->xfer_count;
++ }
++ else {
++ byte_count = ep->maxpacket;
++ }
++
++ /* Find the DWORD length, padded by extra bytes as neccessary if MPS
++ * is not a multiple of DWORD */
++ dword_count = (byte_count + 3) / 4;
++
++#ifdef VERBOSE
++ dump_msg(ep->xfer_buff, byte_count);
++#endif
++
++ /**@todo NGS Where are the Periodic Tx FIFO addresses
++ * intialized? What should this be? */
++
++ fifo = core_if->data_fifo[ep->num];
++
++
++ DWC_DEBUGPL((DBG_PCDV|DBG_CILV), "fifo=%p buff=%p *p=%08x bc=%d\n", fifo, data_buff, *data_buff, byte_count);
++
++ if (!dma) {
++ for (i=0; i<dword_count; i++, data_buff++) {
++ dwc_write_reg32(fifo, *data_buff);
++ }
++ }
++
++ ep->xfer_count += byte_count;
++ ep->xfer_buff += byte_count;
++ ep->dma_addr += byte_count;
++}
++
++/**
++ * Set the EP STALL.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to set the stall on.
++ */
++void dwc_otg_ep_set_stall(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++ depctl_data_t depctl;
++ volatile uint32_t *depctl_addr;
++
++ DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, ep->num,
++ (ep->is_in?"IN":"OUT"));
++
++ DWC_PRINT("%s ep%d-%s\n", __func__, ep->num,
++ (ep->is_in?"in":"out"));
++
++ if (ep->is_in == 1) {
++ depctl_addr = &(core_if->dev_if->in_ep_regs[ep->num]->diepctl);
++ depctl.d32 = dwc_read_reg32(depctl_addr);
++
++ /* set the disable and stall bits */
++ if (depctl.b.epena) {
++ depctl.b.epdis = 1;
++ }
++ depctl.b.stall = 1;
++ dwc_write_reg32(depctl_addr, depctl.d32);
++ }
++ else {
++ depctl_addr = &(core_if->dev_if->out_ep_regs[ep->num]->doepctl);
++ depctl.d32 = dwc_read_reg32(depctl_addr);
++
++ /* set the stall bit */
++ depctl.b.stall = 1;
++ dwc_write_reg32(depctl_addr, depctl.d32);
++ }
++
++ DWC_DEBUGPL(DBG_PCD,"DEPCTL=%0x\n",dwc_read_reg32(depctl_addr));
++
++ return;
++}
++
++/**
++ * Clear the EP STALL.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to clear stall from.
++ */
++void dwc_otg_ep_clear_stall(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++ depctl_data_t depctl;
++ volatile uint32_t *depctl_addr;
++
++ DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, ep->num,
++ (ep->is_in?"IN":"OUT"));
++
++ if (ep->is_in == 1) {
++ depctl_addr = &(core_if->dev_if->in_ep_regs[ep->num]->diepctl);
++ }
++ else {
++ depctl_addr = &(core_if->dev_if->out_ep_regs[ep->num]->doepctl);
++ }
++
++ depctl.d32 = dwc_read_reg32(depctl_addr);
++
++ /* clear the stall bits */
++ depctl.b.stall = 0;
++
++ /*
++ * USB Spec 9.4.5: For endpoints using data toggle, regardless
++ * of whether an endpoint has the Halt feature set, a
++ * ClearFeature(ENDPOINT_HALT) request always results in the
++ * data toggle being reinitialized to DATA0.
++ */
++ if (ep->type == DWC_OTG_EP_TYPE_INTR ||
++ ep->type == DWC_OTG_EP_TYPE_BULK) {
++ depctl.b.setd0pid = 1; /* DATA0 */
++ }
++
++ dwc_write_reg32(depctl_addr, depctl.d32);
++ DWC_DEBUGPL(DBG_PCD,"DEPCTL=%0x\n",dwc_read_reg32(depctl_addr));
++ return;
++}
++
++/**
++ * This function reads a packet from the Rx FIFO into the destination
++ * buffer. To read SETUP data use dwc_otg_read_setup_packet.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param dest Destination buffer for the packet.
++ * @param bytes Number of bytes to copy to the destination.
++ */
++void dwc_otg_read_packet(dwc_otg_core_if_t *core_if,
++ uint8_t *dest,
++ uint16_t bytes)
++{
++ int i;
++ int word_count = (bytes + 3) / 4;
++
++ volatile uint32_t *fifo = core_if->data_fifo[0];
++ uint32_t *data_buff = (uint32_t *)dest;
++
++ /**
++ * @todo Account for the case where _dest is not dword aligned. This
++ * requires reading data from the FIFO into a uint32_t temp buffer,
++ * then moving it into the data buffer.
++ */
++
++ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p,%d)\n", __func__,
++ core_if, dest, bytes);
++
++ for (i=0; i<word_count; i++, data_buff++)
++ {
++ *data_buff = dwc_read_reg32(fifo);
++ }
++
++ return;
++}
++
++
++
++/**
++ * This functions reads the device registers and prints them
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_dump_dev_registers(dwc_otg_core_if_t *core_if)
++{
++ int i;
++ volatile uint32_t *addr;
++
++ DWC_PRINT("Device Global Registers\n");
++ addr=&core_if->dev_if->dev_global_regs->dcfg;
++ DWC_PRINT("DCFG @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->dev_if->dev_global_regs->dctl;
++ DWC_PRINT("DCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->dev_if->dev_global_regs->dsts;
++ DWC_PRINT("DSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->dev_if->dev_global_regs->diepmsk;
++ DWC_PRINT("DIEPMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->dev_if->dev_global_regs->doepmsk;
++ DWC_PRINT("DOEPMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->dev_if->dev_global_regs->daint;
++ DWC_PRINT("DAINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->dev_if->dev_global_regs->daintmsk;
++ DWC_PRINT("DAINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->dev_if->dev_global_regs->dtknqr1;
++ DWC_PRINT("DTKNQR1 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ if (core_if->hwcfg2.b.dev_token_q_depth > 6) {
++ addr=&core_if->dev_if->dev_global_regs->dtknqr2;
++ DWC_PRINT("DTKNQR2 @0x%08X : 0x%08X\n",
++ (uint32_t)addr,dwc_read_reg32(addr));
++ }
++
++ addr=&core_if->dev_if->dev_global_regs->dvbusdis;
++ DWC_PRINT("DVBUSID @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++
++ addr=&core_if->dev_if->dev_global_regs->dvbuspulse;
++ DWC_PRINT("DVBUSPULSE @0x%08X : 0x%08X\n",
++ (uint32_t)addr,dwc_read_reg32(addr));
++
++ if (core_if->hwcfg2.b.dev_token_q_depth > 14) {
++ addr=&core_if->dev_if->dev_global_regs->dtknqr3_dthrctl;
++ DWC_PRINT("DTKNQR3_DTHRCTL @0x%08X : 0x%08X\n",
++ (uint32_t)addr, dwc_read_reg32(addr));
++ }
++/*
++ if (core_if->hwcfg2.b.dev_token_q_depth > 22) {
++ addr=&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk;
++ DWC_PRINT("DTKNQR4 @0x%08X : 0x%08X\n",
++ (uint32_t)addr, dwc_read_reg32(addr));
++ }
++*/
++ addr=&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk;
++ DWC_PRINT("FIFOEMPMSK @0x%08X : 0x%08X\n", (uint32_t)addr, dwc_read_reg32(addr));
++
++ addr=&core_if->dev_if->dev_global_regs->deachint;
++ DWC_PRINT("DEACHINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->dev_if->dev_global_regs->deachintmsk;
++ DWC_PRINT("DEACHINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++
++ for (i=0; i<= core_if->dev_if->num_in_eps; i++) {
++ addr=&core_if->dev_if->dev_global_regs->diepeachintmsk[i];
++ DWC_PRINT("DIEPEACHINTMSK[%d] @0x%08X : 0x%08X\n", i, (uint32_t)addr, dwc_read_reg32(addr));
++ }
++
++
++ for (i=0; i<= core_if->dev_if->num_out_eps; i++) {
++ addr=&core_if->dev_if->dev_global_regs->doepeachintmsk[i];
++ DWC_PRINT("DOEPEACHINTMSK[%d] @0x%08X : 0x%08X\n", i, (uint32_t)addr, dwc_read_reg32(addr));
++ }
++
++ for (i=0; i<= core_if->dev_if->num_in_eps; i++) {
++ DWC_PRINT("Device IN EP %d Registers\n", i);
++ addr=&core_if->dev_if->in_ep_regs[i]->diepctl;
++ DWC_PRINT("DIEPCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->dev_if->in_ep_regs[i]->diepint;
++ DWC_PRINT("DIEPINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->dev_if->in_ep_regs[i]->dieptsiz;
++ DWC_PRINT("DIETSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->dev_if->in_ep_regs[i]->diepdma;
++ DWC_PRINT("DIEPDMA @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->dev_if->in_ep_regs[i]->dtxfsts;
++ DWC_PRINT("DTXFSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->dev_if->in_ep_regs[i]->diepdmab;
++ DWC_PRINT("DIEPDMAB @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ }
++
++
++ for (i=0; i<= core_if->dev_if->num_out_eps; i++) {
++ DWC_PRINT("Device OUT EP %d Registers\n", i);
++ addr=&core_if->dev_if->out_ep_regs[i]->doepctl;
++ DWC_PRINT("DOEPCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->dev_if->out_ep_regs[i]->doepfn;
++ DWC_PRINT("DOEPFN @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->dev_if->out_ep_regs[i]->doepint;
++ DWC_PRINT("DOEPINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->dev_if->out_ep_regs[i]->doeptsiz;
++ DWC_PRINT("DOETSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->dev_if->out_ep_regs[i]->doepdma;
++ DWC_PRINT("DOEPDMA @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->dev_if->out_ep_regs[i]->doepdmab;
++ DWC_PRINT("DOEPDMAB @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++
++ }
++
++
++
++ return;
++}
++
++/**
++ * This functions reads the SPRAM and prints its content
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_dump_spram(dwc_otg_core_if_t *core_if)
++{
++ volatile uint8_t *addr, *start_addr, *end_addr;
++
++ DWC_PRINT("SPRAM Data:\n");
++ start_addr = (void*)core_if->core_global_regs;
++ DWC_PRINT("Base Address: 0x%8X\n", (uint32_t)start_addr);
++ start_addr += 0x00028000;
++ end_addr=(void*)core_if->core_global_regs;
++ end_addr += 0x000280e0;
++
++ for(addr = start_addr; addr < end_addr; addr+=16)
++ {
++ DWC_PRINT("0x%8X:\t%2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X\n", (uint32_t)addr,
++ addr[0],
++ addr[1],
++ addr[2],
++ addr[3],
++ addr[4],
++ addr[5],
++ addr[6],
++ addr[7],
++ addr[8],
++ addr[9],
++ addr[10],
++ addr[11],
++ addr[12],
++ addr[13],
++ addr[14],
++ addr[15]
++ );
++ }
++
++ return;
++}
++/**
++ * This function reads the host registers and prints them
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_dump_host_registers(dwc_otg_core_if_t *core_if)
++{
++ int i;
++ volatile uint32_t *addr;
++
++ DWC_PRINT("Host Global Registers\n");
++ addr=&core_if->host_if->host_global_regs->hcfg;
++ DWC_PRINT("HCFG @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->host_if->host_global_regs->hfir;
++ DWC_PRINT("HFIR @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->host_if->host_global_regs->hfnum;
++ DWC_PRINT("HFNUM @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->host_if->host_global_regs->hptxsts;
++ DWC_PRINT("HPTXSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->host_if->host_global_regs->haint;
++ DWC_PRINT("HAINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->host_if->host_global_regs->haintmsk;
++ DWC_PRINT("HAINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=core_if->host_if->hprt0;
++ DWC_PRINT("HPRT0 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++
++ for (i=0; i<core_if->core_params->host_channels; i++)
++ {
++ DWC_PRINT("Host Channel %d Specific Registers\n", i);
++ addr=&core_if->host_if->hc_regs[i]->hcchar;
++ DWC_PRINT("HCCHAR @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->host_if->hc_regs[i]->hcsplt;
++ DWC_PRINT("HCSPLT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->host_if->hc_regs[i]->hcint;
++ DWC_PRINT("HCINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->host_if->hc_regs[i]->hcintmsk;
++ DWC_PRINT("HCINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->host_if->hc_regs[i]->hctsiz;
++ DWC_PRINT("HCTSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->host_if->hc_regs[i]->hcdma;
++ DWC_PRINT("HCDMA @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ }
++ return;
++}
++
++/**
++ * This function reads the core global registers and prints them
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_dump_global_registers(dwc_otg_core_if_t *core_if)
++{
++ int i;
++ volatile uint32_t *addr;
++
++ DWC_PRINT("Core Global Registers\n");
++ addr=&core_if->core_global_regs->gotgctl;
++ DWC_PRINT("GOTGCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->core_global_regs->gotgint;
++ DWC_PRINT("GOTGINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->core_global_regs->gahbcfg;
++ DWC_PRINT("GAHBCFG @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->core_global_regs->gusbcfg;
++ DWC_PRINT("GUSBCFG @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->core_global_regs->grstctl;
++ DWC_PRINT("GRSTCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->core_global_regs->gintsts;
++ DWC_PRINT("GINTSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->core_global_regs->gintmsk;
++ DWC_PRINT("GINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->core_global_regs->grxstsr;
++ DWC_PRINT("GRXSTSR @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ //addr=&core_if->core_global_regs->grxstsp;
++ //DWC_PRINT("GRXSTSP @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->core_global_regs->grxfsiz;
++ DWC_PRINT("GRXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->core_global_regs->gnptxfsiz;
++ DWC_PRINT("GNPTXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->core_global_regs->gnptxsts;
++ DWC_PRINT("GNPTXSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->core_global_regs->gi2cctl;
++ DWC_PRINT("GI2CCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->core_global_regs->gpvndctl;
++ DWC_PRINT("GPVNDCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->core_global_regs->ggpio;
++ DWC_PRINT("GGPIO @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->core_global_regs->guid;
++ DWC_PRINT("GUID @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->core_global_regs->gsnpsid;
++ DWC_PRINT("GSNPSID @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->core_global_regs->ghwcfg1;
++ DWC_PRINT("GHWCFG1 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->core_global_regs->ghwcfg2;
++ DWC_PRINT("GHWCFG2 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->core_global_regs->ghwcfg3;
++ DWC_PRINT("GHWCFG3 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->core_global_regs->ghwcfg4;
++ DWC_PRINT("GHWCFG4 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&core_if->core_global_regs->hptxfsiz;
++ DWC_PRINT("HPTXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++
++ for (i=0; i<core_if->hwcfg4.b.num_dev_perio_in_ep; i++)
++ {
++ addr=&core_if->core_global_regs->dptxfsiz_dieptxf[i];
++ DWC_PRINT("DPTXFSIZ[%d] @0x%08X : 0x%08X\n",i,(uint32_t)addr,dwc_read_reg32(addr));
++ }
++}
++
++/**
++ * Flush a Tx FIFO.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param num Tx FIFO to flush.
++ */
++void dwc_otg_flush_tx_fifo(dwc_otg_core_if_t *core_if,
++ const int num)
++{
++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++ volatile grstctl_t greset = { .d32 = 0};
++ int count = 0;
++
++ DWC_DEBUGPL((DBG_CIL|DBG_PCDV), "Flush Tx FIFO %d\n", num);
++
++ greset.b.txfflsh = 1;
++ greset.b.txfnum = num;
++ dwc_write_reg32(&global_regs->grstctl, greset.d32);
++
++ do {
++ greset.d32 = dwc_read_reg32(&global_regs->grstctl);
++ if (++count > 10000) {
++ DWC_WARN("%s() HANG! GRSTCTL=%0x GNPTXSTS=0x%08x\n",
++ __func__, greset.d32,
++ dwc_read_reg32(&global_regs->gnptxsts));
++ break;
++ }
++ }
++ while (greset.b.txfflsh == 1);
++
++ /* Wait for 3 PHY Clocks*/
++ UDELAY(1);
++}
++
++/**
++ * Flush Rx FIFO.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_flush_rx_fifo(dwc_otg_core_if_t *core_if)
++{
++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++ volatile grstctl_t greset = { .d32 = 0};
++ int count = 0;
++
++ DWC_DEBUGPL((DBG_CIL|DBG_PCDV), "%s\n", __func__);
++ /*
++ *
++ */
++ greset.b.rxfflsh = 1;
++ dwc_write_reg32(&global_regs->grstctl, greset.d32);
++
++ do {
++ greset.d32 = dwc_read_reg32(&global_regs->grstctl);
++ if (++count > 10000) {
++ DWC_WARN("%s() HANG! GRSTCTL=%0x\n", __func__,
++ greset.d32);
++ break;
++ }
++ }
++ while (greset.b.rxfflsh == 1);
++
++ /* Wait for 3 PHY Clocks*/
++ UDELAY(1);
++}
++
++/**
++ * Do core a soft reset of the core. Be careful with this because it
++ * resets all the internal state machines of the core.
++ */
++void dwc_otg_core_reset(dwc_otg_core_if_t *core_if)
++{
++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++ volatile grstctl_t greset = { .d32 = 0};
++ int count = 0;
++
++ DWC_DEBUGPL(DBG_CILV, "%s\n", __func__);
++ /* Wait for AHB master IDLE state. */
++ do {
++ UDELAY(10);
++ greset.d32 = dwc_read_reg32(&global_regs->grstctl);
++ if (++count > 100000) {
++ DWC_WARN("%s() HANG! AHB Idle GRSTCTL=%0x\n", __func__,
++ greset.d32);
++ return;
++ }
++ }
++ while (greset.b.ahbidle == 0);
++
++ /* Core Soft Reset */
++ count = 0;
++ greset.b.csftrst = 1;
++ dwc_write_reg32(&global_regs->grstctl, greset.d32);
++ do {
++ greset.d32 = dwc_read_reg32(&global_regs->grstctl);
++ if (++count > 10000) {
++ DWC_WARN("%s() HANG! Soft Reset GRSTCTL=%0x\n", __func__,
++ greset.d32);
++ break;
++ }
++ }
++ while (greset.b.csftrst == 1);
++
++ /* Wait for 3 PHY Clocks*/
++ MDELAY(100);
++}
++
++
++
++/**
++ * Register HCD callbacks. The callbacks are used to start and stop
++ * the HCD for interrupt processing.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param cb the HCD callback structure.
++ * @param p pointer to be passed to callback function (usb_hcd*).
++ */
++void dwc_otg_cil_register_hcd_callbacks(dwc_otg_core_if_t *core_if,
++ dwc_otg_cil_callbacks_t *cb,
++ void *p)
++{
++ core_if->hcd_cb = cb;
++ cb->p = p;
++}
++
++/**
++ * Register PCD callbacks. The callbacks are used to start and stop
++ * the PCD for interrupt processing.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param cb the PCD callback structure.
++ * @param p pointer to be passed to callback function (pcd*).
++ */
++void dwc_otg_cil_register_pcd_callbacks(dwc_otg_core_if_t *core_if,
++ dwc_otg_cil_callbacks_t *cb,
++ void *p)
++{
++ core_if->pcd_cb = cb;
++ cb->p = p;
++}
++
++#ifdef DWC_EN_ISOC
++
++/**
++ * This function writes isoc data per 1 (micro)frame into tx fifo
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ *
++ */
++void write_isoc_frame_data(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++ dwc_otg_dev_in_ep_regs_t *ep_regs;
++ dtxfsts_data_t txstatus = {.d32 = 0};
++ uint32_t len = 0;
++ uint32_t dwords;
++
++ ep->xfer_len = ep->data_per_frame;
++ ep->xfer_count = 0;
++
++ ep_regs = core_if->dev_if->in_ep_regs[ep->num];
++
++ len = ep->xfer_len - ep->xfer_count;
++
++ if (len > ep->maxpacket) {
++ len = ep->maxpacket;
++ }
++
++ dwords = (len + 3)/4;
++
++ /* While there is space in the queue and space in the FIFO and
++ * More data to tranfer, Write packets to the Tx FIFO */
++ txstatus.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dtxfsts);
++ DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n",ep->num,txstatus.d32);
++
++ while (txstatus.b.txfspcavail > dwords &&
++ ep->xfer_count < ep->xfer_len &&
++ ep->xfer_len != 0) {
++ /* Write the FIFO */
++ dwc_otg_ep_write_packet(core_if, ep, 0);
++
++ len = ep->xfer_len - ep->xfer_count;
++ if (len > ep->maxpacket) {
++ len = ep->maxpacket;
++ }
++
++ dwords = (len + 3)/4;
++ txstatus.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dtxfsts);
++ DWC_DEBUGPL(DBG_PCDV,"dtxfsts[%d]=0x%08x\n", ep->num, txstatus.d32);
++ }
++}
++
++
++/**
++ * This function initializes a descriptor chain for Isochronous transfer
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ *
++ */
++void dwc_otg_iso_ep_start_frm_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++ deptsiz_data_t deptsiz = { .d32 = 0 };
++ depctl_data_t depctl = { .d32 = 0 };
++ dsts_data_t dsts = { .d32 = 0 };
++ volatile uint32_t *addr;
++
++ if(ep->is_in) {
++ addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
++ } else {
++ addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
++ }
++
++ ep->xfer_len = ep->data_per_frame;
++ ep->xfer_count = 0;
++ ep->xfer_buff = ep->cur_pkt_addr;
++ ep->dma_addr = ep->cur_pkt_dma_addr;
++
++ if(ep->is_in) {
++ /* Program the transfer size and packet count
++ * as follows: xfersize = N * maxpacket +
++ * short_packet pktcnt = N + (short_packet
++ * exist ? 1 : 0)
++ */
++ deptsiz.b.xfersize = ep->xfer_len;
++ deptsiz.b.pktcnt =
++ (ep->xfer_len - 1 + ep->maxpacket) /
++ ep->maxpacket;
++ deptsiz.b.mc = deptsiz.b.pktcnt;
++ dwc_write_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz, deptsiz.d32);
++
++ /* Write the DMA register */
++ if (core_if->dma_enable) {
++ dwc_write_reg32 (&(core_if->dev_if->in_ep_regs[ep->num]->diepdma), (uint32_t)ep->dma_addr);
++ }
++ } else {
++ deptsiz.b.pktcnt =
++ (ep->xfer_len + (ep->maxpacket - 1)) /
++ ep->maxpacket;
++ deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket;
++
++ dwc_write_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doeptsiz, deptsiz.d32);
++
++ if (core_if->dma_enable) {
++ dwc_write_reg32 (&(core_if->dev_if->out_ep_regs[ep->num]->doepdma),
++ (uint32_t)ep->dma_addr);
++ }
++ }
++
++
++ /** Enable endpoint, clear nak */
++
++ depctl.d32 = 0;
++ if(ep->bInterval == 1) {
++ dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
++ ep->next_frame = dsts.b.soffn + ep->bInterval;
++
++ if(ep->next_frame & 0x1) {
++ depctl.b.setd1pid = 1;
++ } else {
++ depctl.b.setd0pid = 1;
++ }
++ } else {
++ ep->next_frame += ep->bInterval;
++
++ if(ep->next_frame & 0x1) {
++ depctl.b.setd1pid = 1;
++ } else {
++ depctl.b.setd0pid = 1;
++ }
++ }
++ depctl.b.epena = 1;
++ depctl.b.cnak = 1;
++
++ dwc_modify_reg32(addr, 0, depctl.d32);
++ depctl.d32 = dwc_read_reg32(addr);
++
++ if(ep->is_in && core_if->dma_enable == 0) {
++ write_isoc_frame_data(core_if, ep);
++ }
++
++}
++
++#endif //DWC_EN_ISOC
+diff --git a/drivers/usb/dwc_otg/dwc_otg_cil.h b/drivers/usb/dwc_otg/dwc_otg_cil.h
+new file mode 100644
+index 0000000..9507992
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_cil.h
+@@ -0,0 +1,1098 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil.h $
++ * $Revision: 1.2 $
++ * $Date: 2008-11-21 05:39:15 $
++ * $Change: 1099526 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#if !defined(__DWC_CIL_H__)
++#define __DWC_CIL_H__
++
++#include <linux/workqueue.h>
++#include <linux/version.h>
++#include <asm/param.h>
++
++#include "linux/dwc_otg_plat.h"
++#include "dwc_otg_regs.h"
++#ifdef DEBUG
++#include "linux/timer.h"
++#endif
++
++/**
++ * @file
++ * This file contains the interface to the Core Interface Layer.
++ */
++
++
++/** Macros defined for DWC OTG HW Release verison */
++#define OTG_CORE_REV_2_00 0x4F542000
++#define OTG_CORE_REV_2_60a 0x4F54260A
++#define OTG_CORE_REV_2_71a 0x4F54271A
++#define OTG_CORE_REV_2_72a 0x4F54272A
++
++/**
++*/
++typedef struct iso_pkt_info
++{
++ uint32_t offset;
++ uint32_t length;
++ int32_t status;
++} iso_pkt_info_t;
++/**
++ * The <code>dwc_ep</code> structure represents the state of a single
++ * endpoint when acting in device mode. It contains the data items
++ * needed for an endpoint to be activated and transfer packets.
++ */
++typedef struct dwc_ep
++{
++ /** EP number used for register address lookup */
++ uint8_t num;
++ /** EP direction 0 = OUT */
++ unsigned is_in : 1;
++ /** EP active. */
++ unsigned active : 1;
++
++ /** Periodic Tx FIFO # for IN EPs For INTR EP set to 0 to use non-periodic Tx FIFO
++ If dedicated Tx FIFOs are enabled for all IN Eps - Tx FIFO # FOR IN EPs*/
++ unsigned tx_fifo_num : 4;
++ /** EP type: 0 - Control, 1 - ISOC, 2 - BULK, 3 - INTR */
++ unsigned type : 2;
++#define DWC_OTG_EP_TYPE_CONTROL 0
++#define DWC_OTG_EP_TYPE_ISOC 1
++#define DWC_OTG_EP_TYPE_BULK 2
++#define DWC_OTG_EP_TYPE_INTR 3
++
++ /** DATA start PID for INTR and BULK EP */
++ unsigned data_pid_start : 1;
++ /** Frame (even/odd) for ISOC EP */
++ unsigned even_odd_frame : 1;
++ /** Max Packet bytes */
++ unsigned maxpacket : 11;
++
++ /** Max Transfer size */
++ unsigned maxxfer : 16;
++
++ /** @name Transfer state */
++ /** @{ */
++
++ /**
++ * Pointer to the beginning of the transfer buffer -- do not modify
++ * during transfer.
++ */
++
++ uint32_t dma_addr;
++
++ uint32_t dma_desc_addr;
++ dwc_otg_dma_desc_t* desc_addr;
++
++
++ uint8_t *start_xfer_buff;
++ /** pointer to the transfer buffer */
++ uint8_t *xfer_buff;
++ /** Number of bytes to transfer */
++ unsigned xfer_len : 19;
++ /** Number of bytes transferred. */
++ unsigned xfer_count : 19;
++ /** Sent ZLP */
++ unsigned sent_zlp : 1;
++ /** Total len for control transfer */
++ unsigned total_len : 19;
++
++ /** stall clear flag */
++ unsigned stall_clear_flag : 1;
++
++ /** Allocated DMA Desc count */
++ uint32_t desc_cnt;
++
++#ifdef DWC_EN_ISOC
++ /**
++ * Variables specific for ISOC EPs
++ *
++ */
++ /** DMA addresses of ISOC buffers */
++ uint32_t dma_addr0;
++ uint32_t dma_addr1;
++
++ uint32_t iso_dma_desc_addr;
++ dwc_otg_dma_desc_t* iso_desc_addr;
++
++ /** pointer to the transfer buffers */
++ uint8_t *xfer_buff0;
++ uint8_t *xfer_buff1;
++
++ /** number of ISOC Buffer is processing */
++ uint32_t proc_buf_num;
++ /** Interval of ISOC Buffer processing */
++ uint32_t buf_proc_intrvl;
++ /** Data size for regular frame */
++ uint32_t data_per_frame;
++
++ /* todo - pattern data support is to be implemented in the future */
++ /** Data size for pattern frame */
++ uint32_t data_pattern_frame;
++ /** Frame number of pattern data */
++ uint32_t sync_frame;
++
++ /** bInterval */
++ uint32_t bInterval;
++ /** ISO Packet number per frame */
++ uint32_t pkt_per_frm;
++ /** Next frame num for which will be setup DMA Desc */
++ uint32_t next_frame;
++ /** Number of packets per buffer processing */
++ uint32_t pkt_cnt;
++ /** Info for all isoc packets */
++ iso_pkt_info_t *pkt_info;
++ /** current pkt number */
++ uint32_t cur_pkt;
++ /** current pkt number */
++ uint8_t *cur_pkt_addr;
++ /** current pkt number */
++ uint32_t cur_pkt_dma_addr;
++#endif //DWC_EN_ISOC
++/** @} */
++} dwc_ep_t;
++
++/*
++ * Reasons for halting a host channel.
++ */
++typedef enum dwc_otg_halt_status
++{
++ DWC_OTG_HC_XFER_NO_HALT_STATUS,
++ DWC_OTG_HC_XFER_COMPLETE,
++ DWC_OTG_HC_XFER_URB_COMPLETE,
++ DWC_OTG_HC_XFER_ACK,
++ DWC_OTG_HC_XFER_NAK,
++ DWC_OTG_HC_XFER_NYET,
++ DWC_OTG_HC_XFER_STALL,
++ DWC_OTG_HC_XFER_XACT_ERR,
++ DWC_OTG_HC_XFER_FRAME_OVERRUN,
++ DWC_OTG_HC_XFER_BABBLE_ERR,
++ DWC_OTG_HC_XFER_DATA_TOGGLE_ERR,
++ DWC_OTG_HC_XFER_AHB_ERR,
++ DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE,
++ DWC_OTG_HC_XFER_URB_DEQUEUE
++} dwc_otg_halt_status_e;
++
++/**
++ * Host channel descriptor. This structure represents the state of a single
++ * host channel when acting in host mode. It contains the data items needed to
++ * transfer packets to an endpoint via a host channel.
++ */
++typedef struct dwc_hc
++{
++ /** Host channel number used for register address lookup */
++ uint8_t hc_num;
++
++ /** Device to access */
++ unsigned dev_addr : 7;
++
++ /** EP to access */
++ unsigned ep_num : 4;
++
++ /** EP direction. 0: OUT, 1: IN */
++ unsigned ep_is_in : 1;
++
++ /**
++ * EP speed.
++ * One of the following values:
++ * - DWC_OTG_EP_SPEED_LOW
++ * - DWC_OTG_EP_SPEED_FULL
++ * - DWC_OTG_EP_SPEED_HIGH
++ */
++ unsigned speed : 2;
++#define DWC_OTG_EP_SPEED_LOW 0
++#define DWC_OTG_EP_SPEED_FULL 1
++#define DWC_OTG_EP_SPEED_HIGH 2
++
++ /**
++ * Endpoint type.
++ * One of the following values:
++ * - DWC_OTG_EP_TYPE_CONTROL: 0
++ * - DWC_OTG_EP_TYPE_ISOC: 1
++ * - DWC_OTG_EP_TYPE_BULK: 2
++ * - DWC_OTG_EP_TYPE_INTR: 3
++ */
++ unsigned ep_type : 2;
++
++ /** Max packet size in bytes */
++ unsigned max_packet : 11;
++
++ /**
++ * PID for initial transaction.
++ * 0: DATA0,<br>
++ * 1: DATA2,<br>
++ * 2: DATA1,<br>
++ * 3: MDATA (non-Control EP),
++ * SETUP (Control EP)
++ */
++ unsigned data_pid_start : 2;
++#define DWC_OTG_HC_PID_DATA0 0
++#define DWC_OTG_HC_PID_DATA2 1
++#define DWC_OTG_HC_PID_DATA1 2
++#define DWC_OTG_HC_PID_MDATA 3
++#define DWC_OTG_HC_PID_SETUP 3
++
++ /** Number of periodic transactions per (micro)frame */
++ unsigned multi_count: 2;
++
++ /** @name Transfer State */
++ /** @{ */
++
++ /** Pointer to the current transfer buffer position. */
++ uint8_t *xfer_buff;
++ /** Total number of bytes to transfer. */
++ uint32_t xfer_len;
++ /** Number of bytes transferred so far. */
++ uint32_t xfer_count;
++ /** Packet count at start of transfer.*/
++ uint16_t start_pkt_count;
++
++ /**
++ * Flag to indicate whether the transfer has been started. Set to 1 if
++ * it has been started, 0 otherwise.
++ */
++ uint8_t xfer_started;
++
++ /**
++ * Set to 1 to indicate that a PING request should be issued on this
++ * channel. If 0, process normally.
++ */
++ uint8_t do_ping;
++
++ /**
++ * Set to 1 to indicate that the error count for this transaction is
++ * non-zero. Set to 0 if the error count is 0.
++ */
++ uint8_t error_state;
++
++ /**
++ * Set to 1 to indicate that this channel should be halted the next
++ * time a request is queued for the channel. This is necessary in
++ * slave mode if no request queue space is available when an attempt
++ * is made to halt the channel.
++ */
++ uint8_t halt_on_queue;
++
++ /**
++ * Set to 1 if the host channel has been halted, but the core is not
++ * finished flushing queued requests. Otherwise 0.
++ */
++ uint8_t halt_pending;
++
++ /**
++ * Reason for halting the host channel.
++ */
++ dwc_otg_halt_status_e halt_status;
++
++ /*
++ * Split settings for the host channel
++ */
++ uint8_t do_split; /**< Enable split for the channel */
++ uint8_t complete_split; /**< Enable complete split */
++ uint8_t hub_addr; /**< Address of high speed hub */
++
++ uint8_t port_addr; /**< Port of the low/full speed device */
++ /** Split transaction position
++ * One of the following values:
++ * - DWC_HCSPLIT_XACTPOS_MID
++ * - DWC_HCSPLIT_XACTPOS_BEGIN
++ * - DWC_HCSPLIT_XACTPOS_END
++ * - DWC_HCSPLIT_XACTPOS_ALL */
++ uint8_t xact_pos;
++
++ /** Set when the host channel does a short read. */
++ uint8_t short_read;
++
++ /**
++ * Number of requests issued for this channel since it was assigned to
++ * the current transfer (not counting PINGs).
++ */
++ uint8_t requests;
++
++ /**
++ * Queue Head for the transfer being processed by this channel.
++ */
++ struct dwc_otg_qh *qh;
++
++ /** @} */
++
++ /** Entry in list of host channels. */
++ struct list_head hc_list_entry;
++} dwc_hc_t;
++
++/**
++ * The following parameters may be specified when starting the module. These
++ * parameters define how the DWC_otg controller should be configured.
++ * Parameter values are passed to the CIL initialization function
++ * dwc_otg_cil_init.
++ */
++typedef struct dwc_otg_core_params
++{
++ int32_t opt;
++#define dwc_param_opt_default 1
++
++ /**
++ * Specifies the OTG capabilities. The driver will automatically
++ * detect the value for this parameter if none is specified.
++ * 0 - HNP and SRP capable (default)
++ * 1 - SRP Only capable
++ * 2 - No HNP/SRP capable
++ */
++ int32_t otg_cap;
++#define DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE 0
++#define DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE 1
++#define DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE 2
++#define dwc_param_otg_cap_default DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE
++
++ /**
++ * Specifies whether to use slave or DMA mode for accessing the data
++ * FIFOs. The driver will automatically detect the value for this
++ * parameter if none is specified.
++ * 0 - Slave
++ * 1 - DMA (default, if available)
++ */
++ int32_t dma_enable;
++#define dwc_param_dma_enable_default 1
++
++ /**
++ * When DMA mode is enabled specifies whether to use address DMA or DMA Descritor mode for accessing the data
++ * FIFOs in device mode. The driver will automatically detect the value for this
++ * parameter if none is specified.
++ * 0 - address DMA
++ * 1 - DMA Descriptor(default, if available)
++ */
++ int32_t dma_desc_enable;
++#define dwc_param_dma_desc_enable_default 0
++ /** The DMA Burst size (applicable only for External DMA
++ * Mode). 1, 4, 8 16, 32, 64, 128, 256 (default 32)
++ */
++ int32_t dma_burst_size; /* Translate this to GAHBCFG values */
++#define dwc_param_dma_burst_size_default 32
++
++ /**
++ * Specifies the maximum speed of operation in host and device mode.
++ * The actual speed depends on the speed of the attached device and
++ * the value of phy_type. The actual speed depends on the speed of the
++ * attached device.
++ * 0 - High Speed (default)
++ * 1 - Full Speed
++ */
++ int32_t speed;
++#define dwc_param_speed_default 0
++#define DWC_SPEED_PARAM_HIGH 0
++#define DWC_SPEED_PARAM_FULL 1
++
++ /** Specifies whether low power mode is supported when attached
++ * to a Full Speed or Low Speed device in host mode.
++ * 0 - Don't support low power mode (default)
++ * 1 - Support low power mode
++ */
++ int32_t host_support_fs_ls_low_power;
++#define dwc_param_host_support_fs_ls_low_power_default 0
++
++ /** Specifies the PHY clock rate in low power mode when connected to a
++ * Low Speed device in host mode. This parameter is applicable only if
++ * HOST_SUPPORT_FS_LS_LOW_POWER is enabled. If PHY_TYPE is set to FS
++ * then defaults to 6 MHZ otherwise 48 MHZ.
++ *
++ * 0 - 48 MHz
++ * 1 - 6 MHz
++ */
++ int32_t host_ls_low_power_phy_clk;
++#define dwc_param_host_ls_low_power_phy_clk_default 0
++#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ 0
++#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ 1
++
++ /**
++ * 0 - Use cC FIFO size parameters
++ * 1 - Allow dynamic FIFO sizing (default)
++ */
++ int32_t enable_dynamic_fifo;
++#define dwc_param_enable_dynamic_fifo_default 1
++
++ /** Total number of 4-byte words in the data FIFO memory. This
++ * memory includes the Rx FIFO, non-periodic Tx FIFO, and periodic
++ * Tx FIFOs.
++ * 32 to 32768 (default 8192)
++ * Note: The total FIFO memory depth in the FPGA configuration is 8192.
++ */
++ int32_t data_fifo_size;
++#define dwc_param_data_fifo_size_default 8192
++
++ /** Number of 4-byte words in the Rx FIFO in device mode when dynamic
++ * FIFO sizing is enabled.
++ * 16 to 32768 (default 1064)
++ */
++ int32_t dev_rx_fifo_size;
++#define dwc_param_dev_rx_fifo_size_default 1064
++
++ /** Number of 4-byte words in the non-periodic Tx FIFO in device mode
++ * when dynamic FIFO sizing is enabled.
++ * 16 to 32768 (default 1024)
++ */
++ int32_t dev_nperio_tx_fifo_size;
++#define dwc_param_dev_nperio_tx_fifo_size_default 1024
++
++ /** Number of 4-byte words in each of the periodic Tx FIFOs in device
++ * mode when dynamic FIFO sizing is enabled.
++ * 4 to 768 (default 256)
++ */
++ uint32_t dev_perio_tx_fifo_size[MAX_PERIO_FIFOS];
++#define dwc_param_dev_perio_tx_fifo_size_default 256
++
++ /** Number of 4-byte words in the Rx FIFO in host mode when dynamic
++ * FIFO sizing is enabled.
++ * 16 to 32768 (default 1024)
++ */
++ int32_t host_rx_fifo_size;
++#define dwc_param_host_rx_fifo_size_default 1024
++
++ /** Number of 4-byte words in the non-periodic Tx FIFO in host mode
++ * when Dynamic FIFO sizing is enabled in the core.
++ * 16 to 32768 (default 1024)
++ */
++ int32_t host_nperio_tx_fifo_size;
++#define dwc_param_host_nperio_tx_fifo_size_default 1024
++
++ /** Number of 4-byte words in the host periodic Tx FIFO when dynamic
++ * FIFO sizing is enabled.
++ * 16 to 32768 (default 1024)
++ */
++ int32_t host_perio_tx_fifo_size;
++#define dwc_param_host_perio_tx_fifo_size_default 1024
++
++ /** The maximum transfer size supported in bytes.
++ * 2047 to 65,535 (default 65,535)
++ */
++ int32_t max_transfer_size;
++#define dwc_param_max_transfer_size_default 65535
++
++ /** The maximum number of packets in a transfer.
++ * 15 to 511 (default 511)
++ */
++ int32_t max_packet_count;
++#define dwc_param_max_packet_count_default 511
++
++ /** The number of host channel registers to use.
++ * 1 to 16 (default 12)
++ * Note: The FPGA configuration supports a maximum of 12 host channels.
++ */
++ int32_t host_channels;
++#define dwc_param_host_channels_default 12
++
++ /** The number of endpoints in addition to EP0 available for device
++ * mode operations.
++ * 1 to 15 (default 6 IN and OUT)
++ * Note: The FPGA configuration supports a maximum of 6 IN and OUT
++ * endpoints in addition to EP0.
++ */
++ int32_t dev_endpoints;
++#define dwc_param_dev_endpoints_default 6
++
++ /**
++ * Specifies the type of PHY interface to use. By default, the driver
++ * will automatically detect the phy_type.
++ *
++ * 0 - Full Speed PHY
++ * 1 - UTMI+ (default)
++ * 2 - ULPI
++ */
++ int32_t phy_type;
++#define DWC_PHY_TYPE_PARAM_FS 0
++#define DWC_PHY_TYPE_PARAM_UTMI 1
++#define DWC_PHY_TYPE_PARAM_ULPI 2
++#define dwc_param_phy_type_default DWC_PHY_TYPE_PARAM_UTMI
++
++ /**
++ * Specifies the UTMI+ Data Width. This parameter is
++ * applicable for a PHY_TYPE of UTMI+ or ULPI. (For a ULPI
++ * PHY_TYPE, this parameter indicates the data width between
++ * the MAC and the ULPI Wrapper.) Also, this parameter is
++ * applicable only if the OTG_HSPHY_WIDTH cC parameter was set
++ * to "8 and 16 bits", meaning that the core has been
++ * configured to work at either data path width.
++ *
++ * 8 or 16 bits (default 16)
++ */
++ int32_t phy_utmi_width;
++#define dwc_param_phy_utmi_width_default 16
++
++ /**
++ * Specifies whether the ULPI operates at double or single
++ * data rate. This parameter is only applicable if PHY_TYPE is
++ * ULPI.
++ *
++ * 0 - single data rate ULPI interface with 8 bit wide data
++ * bus (default)
++ * 1 - double data rate ULPI interface with 4 bit wide data
++ * bus
++ */
++ int32_t phy_ulpi_ddr;
++#define dwc_param_phy_ulpi_ddr_default 0
++
++ /**
++ * Specifies whether to use the internal or external supply to
++ * drive the vbus with a ULPI phy.
++ */
++ int32_t phy_ulpi_ext_vbus;
++#define DWC_PHY_ULPI_INTERNAL_VBUS 0
++#define DWC_PHY_ULPI_EXTERNAL_VBUS 1
++#define dwc_param_phy_ulpi_ext_vbus_default DWC_PHY_ULPI_INTERNAL_VBUS
++
++ /**
++ * Specifies whether to use the I2Cinterface for full speed PHY. This
++ * parameter is only applicable if PHY_TYPE is FS.
++ * 0 - No (default)
++ * 1 - Yes
++ */
++ int32_t i2c_enable;
++#define dwc_param_i2c_enable_default 0
++
++ int32_t ulpi_fs_ls;
++#define dwc_param_ulpi_fs_ls_default 0
++
++ int32_t ts_dline;
++#define dwc_param_ts_dline_default 0
++
++ /**
++ * Specifies whether dedicated transmit FIFOs are
++ * enabled for non periodic IN endpoints in device mode
++ * 0 - No
++ * 1 - Yes
++ */
++ int32_t en_multiple_tx_fifo;
++#define dwc_param_en_multiple_tx_fifo_default 1
++
++ /** Number of 4-byte words in each of the Tx FIFOs in device
++ * mode when dynamic FIFO sizing is enabled.
++ * 4 to 768 (default 256)
++ */
++ uint32_t dev_tx_fifo_size[MAX_TX_FIFOS];
++#define dwc_param_dev_tx_fifo_size_default 256
++
++ /** Thresholding enable flag-
++ * bit 0 - enable non-ISO Tx thresholding
++ * bit 1 - enable ISO Tx thresholding
++ * bit 2 - enable Rx thresholding
++ */
++ uint32_t thr_ctl;
++#define dwc_param_thr_ctl_default 0
++
++ /** Thresholding length for Tx
++ * FIFOs in 32 bit DWORDs
++ */
++ uint32_t tx_thr_length;
++#define dwc_param_tx_thr_length_default 64
++
++ /** Thresholding length for Rx
++ * FIFOs in 32 bit DWORDs
++ */
++ uint32_t rx_thr_length;
++#define dwc_param_rx_thr_length_default 64
++
++ /** Per Transfer Interrupt
++ * mode enable flag
++ * 1 - Enabled
++ * 0 - Disabled
++ */
++ uint32_t pti_enable;
++#define dwc_param_pti_enable_default 0
++
++ /** Molti Processor Interrupt
++ * mode enable flag
++ * 1 - Enabled
++ * 0 - Disabled
++ */
++ uint32_t mpi_enable;
++#define dwc_param_mpi_enable_default 0
++
++} dwc_otg_core_params_t;
++
++#ifdef DEBUG
++struct dwc_otg_core_if;
++typedef struct hc_xfer_info
++{
++ struct dwc_otg_core_if *core_if;
++ dwc_hc_t *hc;
++} hc_xfer_info_t;
++#endif
++
++/**
++ * The <code>dwc_otg_core_if</code> structure contains information needed to manage
++ * the DWC_otg controller acting in either host or device mode. It
++ * represents the programming view of the controller as a whole.
++ */
++typedef struct dwc_otg_core_if
++{
++ /** Parameters that define how the core should be configured.*/
++ dwc_otg_core_params_t *core_params;
++
++ /** Core Global registers starting at offset 000h. */
++ dwc_otg_core_global_regs_t *core_global_regs;
++
++ /** Device-specific information */
++ dwc_otg_dev_if_t *dev_if;
++ /** Host-specific information */
++ dwc_otg_host_if_t *host_if;
++
++ /** Value from SNPSID register */
++ uint32_t snpsid;
++
++ /*
++ * Set to 1 if the core PHY interface bits in USBCFG have been
++ * initialized.
++ */
++ uint8_t phy_init_done;
++
++ /*
++ * SRP Success flag, set by srp success interrupt in FS I2C mode
++ */
++ uint8_t srp_success;
++ uint8_t srp_timer_started;
++
++ /* Common configuration information */
++ /** Power and Clock Gating Control Register */
++ volatile uint32_t *pcgcctl;
++#define DWC_OTG_PCGCCTL_OFFSET 0xE00
++
++ /** Push/pop addresses for endpoints or host channels.*/
++ uint32_t *data_fifo[MAX_EPS_CHANNELS];
++#define DWC_OTG_DATA_FIFO_OFFSET 0x1000
++#define DWC_OTG_DATA_FIFO_SIZE 0x1000
++
++ /** Total RAM for FIFOs (Bytes) */
++ uint16_t total_fifo_size;
++ /** Size of Rx FIFO (Bytes) */
++ uint16_t rx_fifo_size;
++ /** Size of Non-periodic Tx FIFO (Bytes) */
++ uint16_t nperio_tx_fifo_size;
++
++
++ /** 1 if DMA is enabled, 0 otherwise. */
++ uint8_t dma_enable;
++
++ /** 1 if Descriptor DMA mode is enabled, 0 otherwise. */
++ uint8_t dma_desc_enable;
++
++ /** 1 if PTI Enhancement mode is enabled, 0 otherwise. */
++ uint8_t pti_enh_enable;
++
++ /** 1 if MPI Enhancement mode is enabled, 0 otherwise. */
++ uint8_t multiproc_int_enable;
++
++ /** 1 if dedicated Tx FIFOs are enabled, 0 otherwise. */
++ uint8_t en_multiple_tx_fifo;
++
++ /** Set to 1 if multiple packets of a high-bandwidth transfer is in
++ * process of being queued */
++ uint8_t queuing_high_bandwidth;
++
++ /** Hardware Configuration -- stored here for convenience.*/
++ hwcfg1_data_t hwcfg1;
++ hwcfg2_data_t hwcfg2;
++ hwcfg3_data_t hwcfg3;
++ hwcfg4_data_t hwcfg4;
++
++ /** Host and Device Configuration -- stored here for convenience.*/
++ hcfg_data_t hcfg;
++ dcfg_data_t dcfg;
++
++ /** The operational State, during transations
++ * (a_host>>a_peripherial and b_device=>b_host) this may not
++ * match the core but allows the software to determine
++ * transitions.
++ */
++ uint8_t op_state;
++
++ /**
++ * Set to 1 if the HCD needs to be restarted on a session request
++ * interrupt. This is required if no connector ID status change has
++ * occurred since the HCD was last disconnected.
++ */
++ uint8_t restart_hcd_on_session_req;
++
++ /** HCD callbacks */
++ /** A-Device is a_host */
++#define A_HOST (1)
++ /** A-Device is a_suspend */
++#define A_SUSPEND (2)
++ /** A-Device is a_peripherial */
++#define A_PERIPHERAL (3)
++ /** B-Device is operating as a Peripheral. */
++#define B_PERIPHERAL (4)
++ /** B-Device is operating as a Host. */
++#define B_HOST (5)
++
++ /** HCD callbacks */
++ struct dwc_otg_cil_callbacks *hcd_cb;
++ /** PCD callbacks */
++ struct dwc_otg_cil_callbacks *pcd_cb;
++
++ /** Device mode Periodic Tx FIFO Mask */
++ uint32_t p_tx_msk;
++ /** Device mode Periodic Tx FIFO Mask */
++ uint32_t tx_msk;
++
++ /** Workqueue object used for handling several interrupts */
++ struct workqueue_struct *wq_otg;
++
++ /** Work object used for handling "Connector ID Status Change" Interrupt */
++ struct work_struct w_conn_id;
++
++ /** Work object used for handling "Wakeup Detected" Interrupt */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++ struct work_struct w_wkp;
++#else
++ struct delayed_work w_wkp;
++#endif
++
++#ifdef DEBUG
++ uint32_t start_hcchar_val[MAX_EPS_CHANNELS];
++
++ hc_xfer_info_t hc_xfer_info[MAX_EPS_CHANNELS];
++ struct timer_list hc_xfer_timer[MAX_EPS_CHANNELS];
++
++ uint32_t hfnum_7_samples;
++ uint64_t hfnum_7_frrem_accum;
++ uint32_t hfnum_0_samples;
++ uint64_t hfnum_0_frrem_accum;
++ uint32_t hfnum_other_samples;
++ uint64_t hfnum_other_frrem_accum;
++#endif
++
++
++} dwc_otg_core_if_t;
++
++/*We must clear S3C24XX_EINTPEND external interrupt register
++ * because after clearing in this register trigerred IRQ from
++ * H/W core in kernel interrupt can be occured again before OTG
++ * handlers clear all IRQ sources of Core registers because of
++ * timing latencies and Low Level IRQ Type.
++ */
++
++#ifdef CONFIG_MACH_IPMATE
++#define S3C2410X_CLEAR_EINTPEND() \
++do { \
++ if (!dwc_otg_read_core_intr(core_if)) { \
++ __raw_writel(1UL << 11,S3C24XX_EINTPEND); \
++ } \
++} while (0)
++#else
++#define S3C2410X_CLEAR_EINTPEND() do { } while (0)
++#endif
++
++/*
++ * The following functions are functions for works
++ * using during handling some interrupts
++ */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++
++extern void w_conn_id_status_change(void *p);
++extern void w_wakeup_detected(void *p);
++
++#else
++
++extern void w_conn_id_status_change(struct work_struct *p);
++extern void w_wakeup_detected(struct work_struct *p);
++
++#endif
++
++
++/*
++ * The following functions support initialization of the CIL driver component
++ * and the DWC_otg controller.
++ */
++extern dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t *_reg_base_addr,
++ dwc_otg_core_params_t *_core_params);
++extern void dwc_otg_cil_remove(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_core_init(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_core_host_init(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_core_dev_init(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_enable_global_interrupts( dwc_otg_core_if_t *_core_if );
++extern void dwc_otg_disable_global_interrupts( dwc_otg_core_if_t *_core_if );
++
++/** @name Device CIL Functions
++ * The following functions support managing the DWC_otg controller in device
++ * mode.
++ */
++/**@{*/
++extern void dwc_otg_wakeup(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_read_setup_packet (dwc_otg_core_if_t *_core_if, uint32_t *_dest);
++extern uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_ep0_activate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_ep_activate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_ep_deactivate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_ep_start_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_ep_start_zl_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_ep_write_packet(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep, int _dma);
++extern void dwc_otg_ep_set_stall(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_ep_clear_stall(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_dump_dev_registers(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_dump_spram(dwc_otg_core_if_t *_core_if);
++#ifdef DWC_EN_ISOC
++extern void dwc_otg_iso_ep_start_frm_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep);
++extern void dwc_otg_iso_ep_start_buf_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep);
++#endif //DWC_EN_ISOC
++/**@}*/
++
++/** @name Host CIL Functions
++ * The following functions support managing the DWC_otg controller in host
++ * mode.
++ */
++/**@{*/
++extern void dwc_otg_hc_init(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
++extern void dwc_otg_hc_halt(dwc_otg_core_if_t *_core_if,
++ dwc_hc_t *_hc,
++ dwc_otg_halt_status_e _halt_status);
++extern void dwc_otg_hc_cleanup(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
++extern void dwc_otg_hc_start_transfer(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
++extern int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
++extern void dwc_otg_hc_do_ping(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
++extern void dwc_otg_hc_write_packet(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
++extern void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t *_core_if);
++
++/**
++ * This function Reads HPRT0 in preparation to modify. It keeps the
++ * WC bits 0 so that if they are read as 1, they won't clear when you
++ * write it back
++ */
++static inline uint32_t dwc_otg_read_hprt0(dwc_otg_core_if_t *_core_if)
++{
++ hprt0_data_t hprt0;
++ hprt0.d32 = dwc_read_reg32(_core_if->host_if->hprt0);
++ hprt0.b.prtena = 0;
++ hprt0.b.prtconndet = 0;
++ hprt0.b.prtenchng = 0;
++ hprt0.b.prtovrcurrchng = 0;
++ return hprt0.d32;
++}
++
++extern void dwc_otg_dump_host_registers(dwc_otg_core_if_t *_core_if);
++/**@}*/
++
++/** @name Common CIL Functions
++ * The following functions support managing the DWC_otg controller in either
++ * device or host mode.
++ */
++/**@{*/
++
++extern void dwc_otg_read_packet(dwc_otg_core_if_t *core_if,
++ uint8_t *dest,
++ uint16_t bytes);
++
++extern void dwc_otg_dump_global_registers(dwc_otg_core_if_t *_core_if);
++
++extern void dwc_otg_flush_tx_fifo( dwc_otg_core_if_t *_core_if,
++ const int _num );
++extern void dwc_otg_flush_rx_fifo( dwc_otg_core_if_t *_core_if );
++extern void dwc_otg_core_reset( dwc_otg_core_if_t *_core_if );
++
++extern dwc_otg_dma_desc_t* dwc_otg_ep_alloc_desc_chain(uint32_t * dma_desc_addr, uint32_t count);
++extern void dwc_otg_ep_free_desc_chain(dwc_otg_dma_desc_t* desc_addr, uint32_t dma_desc_addr, uint32_t count);
++
++/**
++ * This function returns the Core Interrupt register.
++ */
++static inline uint32_t dwc_otg_read_core_intr(dwc_otg_core_if_t *_core_if)
++{
++ return (dwc_read_reg32(&_core_if->core_global_regs->gintsts) &
++ dwc_read_reg32(&_core_if->core_global_regs->gintmsk));
++}
++
++/**
++ * This function returns the OTG Interrupt register.
++ */
++static inline uint32_t dwc_otg_read_otg_intr (dwc_otg_core_if_t *_core_if)
++{
++ return (dwc_read_reg32 (&_core_if->core_global_regs->gotgint));
++}
++
++/**
++ * This function reads the Device All Endpoints Interrupt register and
++ * returns the IN endpoint interrupt bits.
++ */
++static inline uint32_t dwc_otg_read_dev_all_in_ep_intr(dwc_otg_core_if_t *core_if)
++{
++ uint32_t v;
++
++ if(core_if->multiproc_int_enable) {
++ v = dwc_read_reg32(&core_if->dev_if->dev_global_regs->deachint) &
++ dwc_read_reg32(&core_if->dev_if->dev_global_regs->deachintmsk);
++ } else {
++ v = dwc_read_reg32(&core_if->dev_if->dev_global_regs->daint) &
++ dwc_read_reg32(&core_if->dev_if->dev_global_regs->daintmsk);
++ }
++ return (v & 0xffff);
++
++}
++
++/**
++ * This function reads the Device All Endpoints Interrupt register and
++ * returns the OUT endpoint interrupt bits.
++ */
++static inline uint32_t dwc_otg_read_dev_all_out_ep_intr(dwc_otg_core_if_t *core_if)
++{
++ uint32_t v;
++
++ if(core_if->multiproc_int_enable) {
++ v = dwc_read_reg32(&core_if->dev_if->dev_global_regs->deachint) &
++ dwc_read_reg32(&core_if->dev_if->dev_global_regs->deachintmsk);
++ } else {
++ v = dwc_read_reg32(&core_if->dev_if->dev_global_regs->daint) &
++ dwc_read_reg32(&core_if->dev_if->dev_global_regs->daintmsk);
++ }
++
++ return ((v & 0xffff0000) >> 16);
++}
++
++/**
++ * This function returns the Device IN EP Interrupt register
++ */
++static inline uint32_t dwc_otg_read_dev_in_ep_intr(dwc_otg_core_if_t *core_if,
++ dwc_ep_t *ep)
++{
++ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++ uint32_t v, msk, emp;
++
++ if(core_if->multiproc_int_enable) {
++ msk = dwc_read_reg32(&dev_if->dev_global_regs->diepeachintmsk[ep->num]);
++ emp = dwc_read_reg32(&dev_if->dev_global_regs->dtknqr4_fifoemptymsk);
++ msk |= ((emp >> ep->num) & 0x1) << 7;
++ v = dwc_read_reg32(&dev_if->in_ep_regs[ep->num]->diepint) & msk;
++ } else {
++ msk = dwc_read_reg32(&dev_if->dev_global_regs->diepmsk);
++ emp = dwc_read_reg32(&dev_if->dev_global_regs->dtknqr4_fifoemptymsk);
++ msk |= ((emp >> ep->num) & 0x1) << 7;
++ v = dwc_read_reg32(&dev_if->in_ep_regs[ep->num]->diepint) & msk;
++ }
++
++
++ return v;
++}
++/**
++ * This function returns the Device OUT EP Interrupt register
++ */
++static inline uint32_t dwc_otg_read_dev_out_ep_intr(dwc_otg_core_if_t *_core_if,
++ dwc_ep_t *_ep)
++{
++ dwc_otg_dev_if_t *dev_if = _core_if->dev_if;
++ uint32_t v;
++ doepmsk_data_t msk = { .d32 = 0 };
++
++ if(_core_if->multiproc_int_enable) {
++ msk.d32 = dwc_read_reg32(&dev_if->dev_global_regs->doepeachintmsk[_ep->num]);
++ if(_core_if->pti_enh_enable) {
++ msk.b.pktdrpsts = 1;
++ }
++ v = dwc_read_reg32( &dev_if->out_ep_regs[_ep->num]->doepint) & msk.d32;
++ } else {
++ msk.d32 = dwc_read_reg32(&dev_if->dev_global_regs->doepmsk);
++ if(_core_if->pti_enh_enable) {
++ msk.b.pktdrpsts = 1;
++ }
++ v = dwc_read_reg32( &dev_if->out_ep_regs[_ep->num]->doepint) & msk.d32;
++ }
++ return v;
++}
++
++/**
++ * This function returns the Host All Channel Interrupt register
++ */
++static inline uint32_t dwc_otg_read_host_all_channels_intr (dwc_otg_core_if_t *_core_if)
++{
++ return (dwc_read_reg32 (&_core_if->host_if->host_global_regs->haint));
++}
++
++static inline uint32_t dwc_otg_read_host_channel_intr (dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc)
++{
++ return (dwc_read_reg32 (&_core_if->host_if->hc_regs[_hc->hc_num]->hcint));
++}
++
++
++/**
++ * This function returns the mode of the operation, host or device.
++ *
++ * @return 0 - Device Mode, 1 - Host Mode
++ */
++static inline uint32_t dwc_otg_mode(dwc_otg_core_if_t *_core_if)
++{
++ return (dwc_read_reg32( &_core_if->core_global_regs->gintsts ) & 0x1);
++}
++
++static inline uint8_t dwc_otg_is_device_mode(dwc_otg_core_if_t *_core_if)
++{
++ return (dwc_otg_mode(_core_if) != DWC_HOST_MODE);
++}
++static inline uint8_t dwc_otg_is_host_mode(dwc_otg_core_if_t *_core_if)
++{
++ return (dwc_otg_mode(_core_if) == DWC_HOST_MODE);
++}
++
++extern int32_t dwc_otg_handle_common_intr( dwc_otg_core_if_t *_core_if );
++
++
++/**@}*/
++
++/**
++ * DWC_otg CIL callback structure. This structure allows the HCD and
++ * PCD to register functions used for starting and stopping the PCD
++ * and HCD for role change on for a DRD.
++ */
++typedef struct dwc_otg_cil_callbacks
++{
++ /** Start function for role change */
++ int (*start) (void *_p);
++ /** Stop Function for role change */
++ int (*stop) (void *_p);
++ /** Disconnect Function for role change */
++ int (*disconnect) (void *_p);
++ /** Resume/Remote wakeup Function */
++ int (*resume_wakeup) (void *_p);
++ /** Suspend function */
++ int (*suspend) (void *_p);
++ /** Session Start (SRP) */
++ int (*session_start) (void *_p);
++ /** Pointer passed to start() and stop() */
++ void *p;
++} dwc_otg_cil_callbacks_t;
++
++extern void dwc_otg_cil_register_pcd_callbacks( dwc_otg_core_if_t *_core_if,
++ dwc_otg_cil_callbacks_t *_cb,
++ void *_p);
++extern void dwc_otg_cil_register_hcd_callbacks( dwc_otg_core_if_t *_core_if,
++ dwc_otg_cil_callbacks_t *_cb,
++ void *_p);
++
++#endif
++
+diff --git a/drivers/usb/dwc_otg/dwc_otg_cil_intr.c b/drivers/usb/dwc_otg/dwc_otg_cil_intr.c
+new file mode 100644
+index 0000000..61b17b3
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_cil_intr.c
+@@ -0,0 +1,750 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil_intr.c $
++ * $Revision: 1.2 $
++ * $Date: 2008-11-21 05:39:15 $
++ * $Change: 1065567 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++/** @file
++ *
++ * The Core Interface Layer provides basic services for accessing and
++ * managing the DWC_otg hardware. These services are used by both the
++ * Host Controller Driver and the Peripheral Controller Driver.
++ *
++ * This file contains the Common Interrupt handlers.
++ */
++#include "linux/dwc_otg_plat.h"
++#include "dwc_otg_regs.h"
++#include "dwc_otg_cil.h"
++
++#ifdef DEBUG
++inline const char *op_state_str(dwc_otg_core_if_t *core_if)
++{
++ return (core_if->op_state==A_HOST?"a_host":
++ (core_if->op_state==A_SUSPEND?"a_suspend":
++ (core_if->op_state==A_PERIPHERAL?"a_peripheral":
++ (core_if->op_state==B_PERIPHERAL?"b_peripheral":
++ (core_if->op_state==B_HOST?"b_host":
++ "unknown")))));
++}
++#endif
++
++/** This function will log a debug message
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++int32_t dwc_otg_handle_mode_mismatch_intr (dwc_otg_core_if_t *core_if)
++{
++ gintsts_data_t gintsts;
++ DWC_WARN("Mode Mismatch Interrupt: currently in %s mode\n",
++ dwc_otg_mode(core_if) ? "Host" : "Device");
++
++ /* Clear interrupt */
++ gintsts.d32 = 0;
++ gintsts.b.modemismatch = 1;
++ dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
++ return 1;
++}
++
++/** Start the HCD. Helper function for using the HCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void hcd_start(dwc_otg_core_if_t *core_if)
++{
++ if (core_if->hcd_cb && core_if->hcd_cb->start) {
++ core_if->hcd_cb->start(core_if->hcd_cb->p);
++ }
++}
++/** Stop the HCD. Helper function for using the HCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void hcd_stop(dwc_otg_core_if_t *core_if)
++{
++ if (core_if->hcd_cb && core_if->hcd_cb->stop) {
++ core_if->hcd_cb->stop(core_if->hcd_cb->p);
++ }
++}
++/** Disconnect the HCD. Helper function for using the HCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void hcd_disconnect(dwc_otg_core_if_t *core_if)
++{
++ if (core_if->hcd_cb && core_if->hcd_cb->disconnect) {
++ core_if->hcd_cb->disconnect(core_if->hcd_cb->p);
++ }
++}
++/** Inform the HCD the a New Session has begun. Helper function for
++ * using the HCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void hcd_session_start(dwc_otg_core_if_t *core_if)
++{
++ if (core_if->hcd_cb && core_if->hcd_cb->session_start) {
++ core_if->hcd_cb->session_start(core_if->hcd_cb->p);
++ }
++}
++
++/** Start the PCD. Helper function for using the PCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void pcd_start(dwc_otg_core_if_t *core_if)
++{
++ if (core_if->pcd_cb && core_if->pcd_cb->start) {
++ core_if->pcd_cb->start(core_if->pcd_cb->p);
++ }
++}
++/** Stop the PCD. Helper function for using the PCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void pcd_stop(dwc_otg_core_if_t *core_if)
++{
++ if (core_if->pcd_cb && core_if->pcd_cb->stop) {
++ core_if->pcd_cb->stop(core_if->pcd_cb->p);
++ }
++}
++/** Suspend the PCD. Helper function for using the PCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void pcd_suspend(dwc_otg_core_if_t *core_if)
++{
++ if (core_if->pcd_cb && core_if->pcd_cb->suspend) {
++ core_if->pcd_cb->suspend(core_if->pcd_cb->p);
++ }
++}
++/** Resume the PCD. Helper function for using the PCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void pcd_resume(dwc_otg_core_if_t *core_if)
++{
++ if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) {
++ core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p);
++ }
++}
++
++/**
++ * This function handles the OTG Interrupts. It reads the OTG
++ * Interrupt Register (GOTGINT) to determine what interrupt has
++ * occurred.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++int32_t dwc_otg_handle_otg_intr(dwc_otg_core_if_t *core_if)
++{
++ dwc_otg_core_global_regs_t *global_regs =
++ core_if->core_global_regs;
++ gotgint_data_t gotgint;
++ gotgctl_data_t gotgctl;
++ gintmsk_data_t gintmsk;
++
++ gotgint.d32 = dwc_read_reg32(&global_regs->gotgint);
++ gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl);
++ DWC_DEBUGPL(DBG_CIL, "gotgctl=%08x\n", gotgctl.d32);
++
++ if (gotgint.b.sesenddet) {
++ DWC_DEBUGPL(DBG_ANY, "OTG Interrupt: "
++ "Session End Detected++ (%s)\n",
++ op_state_str(core_if));
++ gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl);
++
++ if (core_if->op_state == B_HOST) {
++ pcd_start(core_if);
++ core_if->op_state = B_PERIPHERAL;
++ } else {
++ /* If not B_HOST and Device HNP still set. HNP
++ * Did not succeed!*/
++ if (gotgctl.b.devhnpen) {
++ DWC_DEBUGPL(DBG_ANY, "Session End Detected\n");
++ DWC_ERROR("Device Not Connected/Responding!\n");
++ }
++
++ /* If Session End Detected the B-Cable has
++ * been disconnected. */
++ /* Reset PCD and Gadget driver to a
++ * clean state. */
++ pcd_stop(core_if);
++ }
++ gotgctl.d32 = 0;
++ gotgctl.b.devhnpen = 1;
++ dwc_modify_reg32(&global_regs->gotgctl,
++ gotgctl.d32, 0);
++ }
++ if (gotgint.b.sesreqsucstschng) {
++ DWC_DEBUGPL(DBG_ANY, " OTG Interrupt: "
++ "Session Reqeust Success Status Change++\n");
++ gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl);
++ if (gotgctl.b.sesreqscs) {
++ if ((core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS) &&
++ (core_if->core_params->i2c_enable)) {
++ core_if->srp_success = 1;
++ }
++ else {
++ pcd_resume(core_if);
++ /* Clear Session Request */
++ gotgctl.d32 = 0;
++ gotgctl.b.sesreq = 1;
++ dwc_modify_reg32(&global_regs->gotgctl,
++ gotgctl.d32, 0);
++ }
++ }
++ }
++ if (gotgint.b.hstnegsucstschng) {
++ /* Print statements during the HNP interrupt handling
++ * can cause it to fail.*/
++ gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl);
++ if (gotgctl.b.hstnegscs) {
++ if (dwc_otg_is_host_mode(core_if)) {
++ core_if->op_state = B_HOST;
++ /*
++ * Need to disable SOF interrupt immediately.
++ * When switching from device to host, the PCD
++ * interrupt handler won't handle the
++ * interrupt if host mode is already set. The
++ * HCD interrupt handler won't get called if
++ * the HCD state is HALT. This means that the
++ * interrupt does not get handled and Linux
++ * complains loudly.
++ */
++ gintmsk.d32 = 0;
++ gintmsk.b.sofintr = 1;
++ dwc_modify_reg32(&global_regs->gintmsk,
++ gintmsk.d32, 0);
++ pcd_stop(core_if);
++ /*
++ * Initialize the Core for Host mode.
++ */
++ hcd_start(core_if);
++ core_if->op_state = B_HOST;
++ }
++ } else {
++ gotgctl.d32 = 0;
++ gotgctl.b.hnpreq = 1;
++ gotgctl.b.devhnpen = 1;
++ dwc_modify_reg32(&global_regs->gotgctl,
++ gotgctl.d32, 0);
++ DWC_DEBUGPL(DBG_ANY, "HNP Failed\n");
++ DWC_ERROR("Device Not Connected/Responding\n");
++ }
++ }
++ if (gotgint.b.hstnegdet) {
++ /* The disconnect interrupt is set at the same time as
++ * Host Negotiation Detected. During the mode
++ * switch all interrupts are cleared so the disconnect
++ * interrupt handler will not get executed.
++ */
++ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
++ "Host Negotiation Detected++ (%s)\n",
++ (dwc_otg_is_host_mode(core_if)?"Host":"Device"));
++ if (dwc_otg_is_device_mode(core_if)){
++ DWC_DEBUGPL(DBG_ANY, "a_suspend->a_peripheral (%d)\n", core_if->op_state);
++ hcd_disconnect(core_if);
++ pcd_start(core_if);
++ core_if->op_state = A_PERIPHERAL;
++ } else {
++ /*
++ * Need to disable SOF interrupt immediately. When
++ * switching from device to host, the PCD interrupt
++ * handler won't handle the interrupt if host mode is
++ * already set. The HCD interrupt handler won't get
++ * called if the HCD state is HALT. This means that
++ * the interrupt does not get handled and Linux
++ * complains loudly.
++ */
++ gintmsk.d32 = 0;
++ gintmsk.b.sofintr = 1;
++ dwc_modify_reg32(&global_regs->gintmsk,
++ gintmsk.d32, 0);
++ pcd_stop(core_if);
++ hcd_start(core_if);
++ core_if->op_state = A_HOST;
++ }
++ }
++ if (gotgint.b.adevtoutchng) {
++ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
++ "A-Device Timeout Change++\n");
++ }
++ if (gotgint.b.debdone) {
++ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
++ "Debounce Done++\n");
++ }
++
++ /* Clear GOTGINT */
++ dwc_write_reg32 (&core_if->core_global_regs->gotgint, gotgint.d32);
++
++ return 1;
++}
++
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++
++void w_conn_id_status_change(void *p)
++{
++ dwc_otg_core_if_t *core_if = p;
++
++#else
++
++void w_conn_id_status_change(struct work_struct *p)
++{
++ dwc_otg_core_if_t *core_if = container_of(p, dwc_otg_core_if_t, w_conn_id);
++
++#endif
++
++
++ uint32_t count = 0;
++ gotgctl_data_t gotgctl = { .d32 = 0 };
++
++ gotgctl.d32 = dwc_read_reg32(&core_if->core_global_regs->gotgctl);
++ DWC_DEBUGPL(DBG_CIL, "gotgctl=%0x\n", gotgctl.d32);
++ DWC_DEBUGPL(DBG_CIL, "gotgctl.b.conidsts=%d\n", gotgctl.b.conidsts);
++
++ /* B-Device connector (Device Mode) */
++ if (gotgctl.b.conidsts) {
++ /* Wait for switch to device mode. */
++ while (!dwc_otg_is_device_mode(core_if)){
++ DWC_PRINT("Waiting for Peripheral Mode, Mode=%s\n",
++ (dwc_otg_is_host_mode(core_if)?"Host":"Peripheral"));
++ MDELAY(100);
++ if (++count > 10000) *(uint32_t*)NULL=0;
++ }
++ core_if->op_state = B_PERIPHERAL;
++ dwc_otg_core_init(core_if);
++ dwc_otg_enable_global_interrupts(core_if);
++ pcd_start(core_if);
++ } else {
++ /* A-Device connector (Host Mode) */
++ while (!dwc_otg_is_host_mode(core_if)) {
++ DWC_PRINT("Waiting for Host Mode, Mode=%s\n",
++ (dwc_otg_is_host_mode(core_if)?"Host":"Peripheral"));
++ MDELAY(100);
++ if (++count > 10000) *(uint32_t*)NULL=0;
++ }
++ core_if->op_state = A_HOST;
++ /*
++ * Initialize the Core for Host mode.
++ */
++ dwc_otg_core_init(core_if);
++ dwc_otg_enable_global_interrupts(core_if);
++ hcd_start(core_if);
++ }
++}
++
++
++/**
++ * This function handles the Connector ID Status Change Interrupt. It
++ * reads the OTG Interrupt Register (GOTCTL) to determine whether this
++ * is a Device to Host Mode transition or a Host Mode to Device
++ * Transition.
++ *
++ * This only occurs when the cable is connected/removed from the PHY
++ * connector.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++int32_t dwc_otg_handle_conn_id_status_change_intr(dwc_otg_core_if_t *core_if)
++{
++
++ /*
++ * Need to disable SOF interrupt immediately. If switching from device
++ * to host, the PCD interrupt handler won't handle the interrupt if
++ * host mode is already set. The HCD interrupt handler won't get
++ * called if the HCD state is HALT. This means that the interrupt does
++ * not get handled and Linux complains loudly.
++ */
++ gintmsk_data_t gintmsk = { .d32 = 0 };
++ gintsts_data_t gintsts = { .d32 = 0 };
++
++ gintmsk.b.sofintr = 1;
++ dwc_modify_reg32(&core_if->core_global_regs->gintmsk, gintmsk.d32, 0);
++
++ DWC_DEBUGPL(DBG_CIL, " ++Connector ID Status Change Interrupt++ (%s)\n",
++ (dwc_otg_is_host_mode(core_if)?"Host":"Device"));
++
++ /*
++ * Need to schedule a work, as there are possible DELAY function calls
++ */
++ queue_work(core_if->wq_otg, &core_if->w_conn_id);
++
++ /* Set flag and clear interrupt */
++ gintsts.b.conidstschng = 1;
++ dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
++
++ return 1;
++}
++
++/**
++ * This interrupt indicates that a device is initiating the Session
++ * Request Protocol to request the host to turn on bus power so a new
++ * session can begin. The handler responds by turning on bus power. If
++ * the DWC_otg controller is in low power mode, the handler brings the
++ * controller out of low power mode before turning on bus power.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++int32_t dwc_otg_handle_session_req_intr(dwc_otg_core_if_t *core_if)
++{
++ gintsts_data_t gintsts;
++
++#ifndef DWC_HOST_ONLY
++ hprt0_data_t hprt0;
++ DWC_DEBUGPL(DBG_ANY, "++Session Request Interrupt++\n");
++
++ if (dwc_otg_is_device_mode(core_if)) {
++ DWC_PRINT("SRP: Device mode\n");
++ } else {
++ DWC_PRINT("SRP: Host mode\n");
++
++ /* Turn on the port power bit. */
++ hprt0.d32 = dwc_otg_read_hprt0(core_if);
++ hprt0.b.prtpwr = 1;
++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++
++ /* Start the Connection timer. So a message can be displayed
++ * if connect does not occur within 10 seconds. */
++ hcd_session_start(core_if);
++ }
++#endif
++
++ /* Clear interrupt */
++ gintsts.d32 = 0;
++ gintsts.b.sessreqintr = 1;
++ dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
++
++ return 1;
++}
++
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++void w_wakeup_detected(void *p)
++{
++ dwc_otg_core_if_t* core_if = p;
++
++#else
++
++void w_wakeup_detected(struct work_struct *p)
++{
++ struct delayed_work *dw = container_of(p, struct delayed_work, work);
++ dwc_otg_core_if_t *core_if = container_of(dw, dwc_otg_core_if_t, w_wkp);
++
++#endif
++ /*
++ * Clear the Resume after 70ms. (Need 20 ms minimum. Use 70 ms
++ * so that OPT tests pass with all PHYs).
++ */
++ hprt0_data_t hprt0 = {.d32=0};
++#if 0
++ pcgcctl_data_t pcgcctl = {.d32=0};
++ /* Restart the Phy Clock */
++ pcgcctl.b.stoppclk = 1;
++ dwc_modify_reg32(core_if->pcgcctl, pcgcctl.d32, 0);
++ UDELAY(10);
++#endif //0
++ hprt0.d32 = dwc_otg_read_hprt0(core_if);
++ DWC_DEBUGPL(DBG_ANY,"Resume: HPRT0=%0x\n", hprt0.d32);
++// MDELAY(70);
++ hprt0.b.prtres = 0; /* Resume */
++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++ DWC_DEBUGPL(DBG_ANY,"Clear Resume: HPRT0=%0x\n", dwc_read_reg32(core_if->host_if->hprt0));
++}
++/**
++ * This interrupt indicates that the DWC_otg controller has detected a
++ * resume or remote wakeup sequence. If the DWC_otg controller is in
++ * low power mode, the handler must brings the controller out of low
++ * power mode. The controller automatically begins resume
++ * signaling. The handler schedules a time to stop resume signaling.
++ */
++int32_t dwc_otg_handle_wakeup_detected_intr(dwc_otg_core_if_t *core_if)
++{
++ gintsts_data_t gintsts;
++
++ DWC_DEBUGPL(DBG_ANY, "++Resume and Remote Wakeup Detected Interrupt++\n");
++
++ if (dwc_otg_is_device_mode(core_if)) {
++ dctl_data_t dctl = {.d32=0};
++ DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n",
++ dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts));
++#ifdef PARTIAL_POWER_DOWN
++ if (core_if->hwcfg4.b.power_optimiz) {
++ pcgcctl_data_t power = {.d32=0};
++
++ power.d32 = dwc_read_reg32(core_if->pcgcctl);
++ DWC_DEBUGPL(DBG_CIL, "PCGCCTL=%0x\n", power.d32);
++
++ power.b.stoppclk = 0;
++ dwc_write_reg32(core_if->pcgcctl, power.d32);
++
++ power.b.pwrclmp = 0;
++ dwc_write_reg32(core_if->pcgcctl, power.d32);
++
++ power.b.rstpdwnmodule = 0;
++ dwc_write_reg32(core_if->pcgcctl, power.d32);
++ }
++#endif
++ /* Clear the Remote Wakeup Signalling */
++ dctl.b.rmtwkupsig = 1;
++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dctl,
++ dctl.d32, 0);
++
++ if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) {
++ core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p);
++ }
++
++ } else {
++ pcgcctl_data_t pcgcctl = {.d32=0};
++
++ /* Restart the Phy Clock */
++ pcgcctl.b.stoppclk = 1;
++ dwc_modify_reg32(core_if->pcgcctl, pcgcctl.d32, 0);
++
++ queue_delayed_work(core_if->wq_otg, &core_if->w_wkp, ((70 * HZ / 1000) + 1));
++ }
++
++ /* Clear interrupt */
++ gintsts.d32 = 0;
++ gintsts.b.wkupintr = 1;
++ dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
++
++ return 1;
++}
++
++/**
++ * This interrupt indicates that a device has been disconnected from
++ * the root port.
++ */
++int32_t dwc_otg_handle_disconnect_intr(dwc_otg_core_if_t *core_if)
++{
++ gintsts_data_t gintsts;
++
++ DWC_DEBUGPL(DBG_ANY, "++Disconnect Detected Interrupt++ (%s) %s\n",
++ (dwc_otg_is_host_mode(core_if)?"Host":"Device"),
++ op_state_str(core_if));
++
++/** @todo Consolidate this if statement. */
++#ifndef DWC_HOST_ONLY
++ if (core_if->op_state == B_HOST) {
++ /* If in device mode Disconnect and stop the HCD, then
++ * start the PCD. */
++ hcd_disconnect(core_if);
++ pcd_start(core_if);
++ core_if->op_state = B_PERIPHERAL;
++ } else if (dwc_otg_is_device_mode(core_if)) {
++ gotgctl_data_t gotgctl = { .d32 = 0 };
++ gotgctl.d32 = dwc_read_reg32(&core_if->core_global_regs->gotgctl);
++ if (gotgctl.b.hstsethnpen==1) {
++ /* Do nothing, if HNP in process the OTG
++ * interrupt "Host Negotiation Detected"
++ * interrupt will do the mode switch.
++ */
++ } else if (gotgctl.b.devhnpen == 0) {
++ /* If in device mode Disconnect and stop the HCD, then
++ * start the PCD. */
++ hcd_disconnect(core_if);
++ pcd_start(core_if);
++ core_if->op_state = B_PERIPHERAL;
++ } else {
++ DWC_DEBUGPL(DBG_ANY,"!a_peripheral && !devhnpen\n");
++ }
++ } else {
++ if (core_if->op_state == A_HOST) {
++ /* A-Cable still connected but device disconnected. */
++ hcd_disconnect(core_if);
++ }
++ }
++#endif
++
++ gintsts.d32 = 0;
++ gintsts.b.disconnect = 1;
++ dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
++ return 1;
++}
++/**
++ * This interrupt indicates that SUSPEND state has been detected on
++ * the USB.
++ *
++ * For HNP the USB Suspend interrupt signals the change from
++ * "a_peripheral" to "a_host".
++ *
++ * When power management is enabled the core will be put in low power
++ * mode.
++ */
++int32_t dwc_otg_handle_usb_suspend_intr(dwc_otg_core_if_t *core_if)
++{
++ dsts_data_t dsts;
++ gintsts_data_t gintsts;
++
++ DWC_DEBUGPL(DBG_ANY,"USB SUSPEND\n");
++
++ if (dwc_otg_is_device_mode(core_if)) {
++ /* Check the Device status register to determine if the Suspend
++ * state is active. */
++ dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
++ DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n", dsts.d32);
++ DWC_DEBUGPL(DBG_PCD, "DSTS.Suspend Status=%d "
++ "HWCFG4.power Optimize=%d\n",
++ dsts.b.suspsts, core_if->hwcfg4.b.power_optimiz);
++
++
++#ifdef PARTIAL_POWER_DOWN
++/** @todo Add a module parameter for power management. */
++
++ if (dsts.b.suspsts && core_if->hwcfg4.b.power_optimiz) {
++ pcgcctl_data_t power = {.d32=0};
++ DWC_DEBUGPL(DBG_CIL, "suspend\n");
++
++ power.b.pwrclmp = 1;
++ dwc_write_reg32(core_if->pcgcctl, power.d32);
++
++ power.b.rstpdwnmodule = 1;
++ dwc_modify_reg32(core_if->pcgcctl, 0, power.d32);
++
++ power.b.stoppclk = 1;
++ dwc_modify_reg32(core_if->pcgcctl, 0, power.d32);
++
++ } else {
++ DWC_DEBUGPL(DBG_ANY,"disconnect?\n");
++ }
++#endif
++ /* PCD callback for suspend. */
++ pcd_suspend(core_if);
++ } else {
++ if (core_if->op_state == A_PERIPHERAL) {
++ DWC_DEBUGPL(DBG_ANY,"a_peripheral->a_host\n");
++ /* Clear the a_peripheral flag, back to a_host. */
++ pcd_stop(core_if);
++ hcd_start(core_if);
++ core_if->op_state = A_HOST;
++ }
++ }
++
++ /* Clear interrupt */
++ gintsts.d32 = 0;
++ gintsts.b.usbsuspend = 1;
++ dwc_write_reg32(&core_if->core_global_regs->gintsts, gintsts.d32);
++
++ return 1;
++}
++
++
++/**
++ * This function returns the Core Interrupt register.
++ */
++static inline uint32_t dwc_otg_read_common_intr(dwc_otg_core_if_t *core_if)
++{
++ gintsts_data_t gintsts;
++ gintmsk_data_t gintmsk;
++ gintmsk_data_t gintmsk_common = {.d32=0};
++ gintmsk_common.b.wkupintr = 1;
++ gintmsk_common.b.sessreqintr = 1;
++ gintmsk_common.b.conidstschng = 1;
++ gintmsk_common.b.otgintr = 1;
++ gintmsk_common.b.modemismatch = 1;
++ gintmsk_common.b.disconnect = 1;
++ gintmsk_common.b.usbsuspend = 1;
++ /** @todo: The port interrupt occurs while in device
++ * mode. Added code to CIL to clear the interrupt for now!
++ */
++ gintmsk_common.b.portintr = 1;
++
++ gintsts.d32 = dwc_read_reg32(&core_if->core_global_regs->gintsts);
++ gintmsk.d32 = dwc_read_reg32(&core_if->core_global_regs->gintmsk);
++#ifdef DEBUG
++ /* if any common interrupts set */
++ if (gintsts.d32 & gintmsk_common.d32) {
++ DWC_DEBUGPL(DBG_ANY, "gintsts=%08x gintmsk=%08x\n",
++ gintsts.d32, gintmsk.d32);
++ }
++#endif
++
++ return ((gintsts.d32 & gintmsk.d32) & gintmsk_common.d32);
++
++}
++
++/**
++ * Common interrupt handler.
++ *
++ * The common interrupts are those that occur in both Host and Device mode.
++ * This handler handles the following interrupts:
++ * - Mode Mismatch Interrupt
++ * - Disconnect Interrupt
++ * - OTG Interrupt
++ * - Connector ID Status Change Interrupt
++ * - Session Request Interrupt.
++ * - Resume / Remote Wakeup Detected Interrupt.
++ *
++ */
++int32_t dwc_otg_handle_common_intr(dwc_otg_core_if_t *core_if)
++{
++ int retval = 0;
++ gintsts_data_t gintsts;
++
++ gintsts.d32 = dwc_otg_read_common_intr(core_if);
++
++ if (gintsts.b.modemismatch) {
++ retval |= dwc_otg_handle_mode_mismatch_intr(core_if);
++ }
++ if (gintsts.b.otgintr) {
++ retval |= dwc_otg_handle_otg_intr(core_if);
++ }
++ if (gintsts.b.conidstschng) {
++ retval |= dwc_otg_handle_conn_id_status_change_intr(core_if);
++ }
++ if (gintsts.b.disconnect) {
++ retval |= dwc_otg_handle_disconnect_intr(core_if);
++ }
++ if (gintsts.b.sessreqintr) {
++ retval |= dwc_otg_handle_session_req_intr(core_if);
++ }
++ if (gintsts.b.wkupintr) {
++ retval |= dwc_otg_handle_wakeup_detected_intr(core_if);
++ }
++ if (gintsts.b.usbsuspend) {
++ retval |= dwc_otg_handle_usb_suspend_intr(core_if);
++ }
++ if (gintsts.b.portintr && dwc_otg_is_device_mode(core_if)) {
++ /* The port interrupt occurs while in device mode with HPRT0
++ * Port Enable/Disable.
++ */
++ gintsts.d32 = 0;
++ gintsts.b.portintr = 1;
++ dwc_write_reg32(&core_if->core_global_regs->gintsts,
++ gintsts.d32);
++ retval |= 1;
++
++ }
++
++ S3C2410X_CLEAR_EINTPEND();
++
++ return retval;
++}
+diff --git a/drivers/usb/dwc_otg/dwc_otg_driver.c b/drivers/usb/dwc_otg/dwc_otg_driver.c
+new file mode 100644
+index 0000000..263494c
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_driver.c
+@@ -0,0 +1,1273 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_driver.c $
++ * $Revision: 1.7 $
++ * $Date: 2008-11-21 05:39:15 $
++ * $Change: 791271 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++/** @file
++ * The dwc_otg_driver module provides the initialization and cleanup entry
++ * points for the DWC_otg driver. This module will be dynamically installed
++ * after Linux is booted using the insmod command. When the module is
++ * installed, the dwc_otg_driver_init function is called. When the module is
++ * removed (using rmmod), the dwc_otg_driver_cleanup function is called.
++ *
++ * This module also defines a data structure for the dwc_otg_driver, which is
++ * used in conjunction with the standard ARM platform_device structure. These
++ * structures allow the OTG driver to comply with the standard Linux driver
++ * model in which devices and drivers are registered with a bus driver. This
++ * has the benefit that Linux can expose attributes of the driver and device
++ * in its special sysfs file system. Users can then read or write files in
++ * this file system to perform diagnostics on the driver components or the
++ * device.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/errno.h>
++#include <linux/types.h>
++#include <linux/stat.h> /* permission constants */
++#include <linux/version.h>
++#include <linux/platform_device.h>
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++# include <linux/irq.h>
++#endif
++
++#include <asm/io.h>
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++# include <asm/irq.h>
++#endif
++
++#include "linux/dwc_otg_plat.h"
++#include "dwc_otg_attr.h"
++#include "dwc_otg_driver.h"
++#include "dwc_otg_cil.h"
++#include "dwc_otg_pcd.h"
++#include "dwc_otg_hcd.h"
++
++#define DWC_DRIVER_VERSION "2.72a 24-JUN-2008"
++#define DWC_DRIVER_DESC "HS OTG USB Controller driver"
++
++static const char dwc_driver_name[] = "dwc_otg";
++
++/*-------------------------------------------------------------------------*/
++/* Encapsulate the module parameter settings */
++
++static dwc_otg_core_params_t dwc_otg_module_params = {
++ .opt = -1,
++ .otg_cap = -1,
++ .dma_enable = -1,
++ .dma_desc_enable = -1,
++ .dma_burst_size = -1,
++ .speed = -1,
++ .host_support_fs_ls_low_power = -1,
++ .host_ls_low_power_phy_clk = -1,
++ .enable_dynamic_fifo = -1,
++ .data_fifo_size = -1,
++ .dev_rx_fifo_size = -1,
++ .dev_nperio_tx_fifo_size = -1,
++ .dev_perio_tx_fifo_size = {
++ /* dev_perio_tx_fifo_size_1 */
++ -1,
++ -1,
++ -1,
++ -1,
++ -1,
++ -1,
++ -1,
++ -1,
++ -1,
++ -1,
++ -1,
++ -1,
++ -1,
++ -1,
++ -1
++ /* 15 */
++ },
++ .host_rx_fifo_size = -1,
++ .host_nperio_tx_fifo_size = -1,
++ .host_perio_tx_fifo_size = -1,
++ .max_transfer_size = -1,
++ .max_packet_count = -1,
++ .host_channels = -1,
++ .dev_endpoints = -1,
++ .phy_type = -1,
++ .phy_utmi_width = -1,
++ .phy_ulpi_ddr = -1,
++ .phy_ulpi_ext_vbus = -1,
++ .i2c_enable = -1,
++ .ulpi_fs_ls = -1,
++ .ts_dline = -1,
++ .en_multiple_tx_fifo = -1,
++ .dev_tx_fifo_size = {
++ /* dev_tx_fifo_size */
++ -1,
++ -1,
++ -1,
++ -1,
++ -1,
++ -1,
++ -1,
++ -1,
++ -1,
++ -1,
++ -1,
++ -1,
++ -1,
++ -1,
++ -1
++ /* 15 */
++ },
++ .thr_ctl = -1,
++ .tx_thr_length = -1,
++ .rx_thr_length = -1,
++ .pti_enable = -1,
++ .mpi_enable = -1,
++};
++
++/**
++ * This function shows the Driver Version.
++ */
++static ssize_t version_show(struct device_driver *dev, char *buf)
++{
++ return snprintf(buf, sizeof(DWC_DRIVER_VERSION)+2, "%s\n",
++ DWC_DRIVER_VERSION);
++}
++static DRIVER_ATTR(version, S_IRUGO, version_show, NULL);
++
++/**
++ * Global Debug Level Mask.
++ */
++uint32_t g_dbg_lvl = 0; /* OFF */
++
++/**
++ * This function shows the driver Debug Level.
++ */
++static ssize_t dbg_level_show(struct device_driver *drv, char *buf)
++{
++ return sprintf(buf, "0x%0x\n", g_dbg_lvl);
++}
++
++/**
++ * This function stores the driver Debug Level.
++ */
++static ssize_t dbg_level_store(struct device_driver *drv, const char *buf,
++ size_t count)
++{
++ g_dbg_lvl = simple_strtoul(buf, NULL, 16);
++ return count;
++}
++static DRIVER_ATTR(debuglevel, S_IRUGO|S_IWUSR, dbg_level_show, dbg_level_store);
++
++/**
++ * This function is called during module intialization to verify that
++ * the module parameters are in a valid state.
++ */
++static int check_parameters(dwc_otg_core_if_t *core_if)
++{
++ int i;
++ int retval = 0;
++
++/* Checks if the parameter is outside of its valid range of values */
++#define DWC_OTG_PARAM_TEST(_param_, _low_, _high_) \
++ ((dwc_otg_module_params._param_ < (_low_)) || \
++ (dwc_otg_module_params._param_ > (_high_)))
++
++/* If the parameter has been set by the user, check that the parameter value is
++ * within the value range of values. If not, report a module error. */
++#define DWC_OTG_PARAM_ERR(_param_, _low_, _high_, _string_) \
++ do { \
++ if (dwc_otg_module_params._param_ != -1) { \
++ if (DWC_OTG_PARAM_TEST(_param_, (_low_), (_high_))) { \
++ DWC_ERROR("`%d' invalid for parameter `%s'\n", \
++ dwc_otg_module_params._param_, _string_); \
++ dwc_otg_module_params._param_ = dwc_param_##_param_##_default; \
++ retval++; \
++ } \
++ } \
++ } while (0)
++
++ DWC_OTG_PARAM_ERR(opt,0,1,"opt");
++ DWC_OTG_PARAM_ERR(otg_cap,0,2,"otg_cap");
++ DWC_OTG_PARAM_ERR(dma_enable,0,1,"dma_enable");
++ DWC_OTG_PARAM_ERR(dma_desc_enable,0,1,"dma_desc_enable");
++ DWC_OTG_PARAM_ERR(speed,0,1,"speed");
++ DWC_OTG_PARAM_ERR(host_support_fs_ls_low_power,0,1,"host_support_fs_ls_low_power");
++ DWC_OTG_PARAM_ERR(host_ls_low_power_phy_clk,0,1,"host_ls_low_power_phy_clk");
++ DWC_OTG_PARAM_ERR(enable_dynamic_fifo,0,1,"enable_dynamic_fifo");
++ DWC_OTG_PARAM_ERR(data_fifo_size,32,32768,"data_fifo_size");
++ DWC_OTG_PARAM_ERR(dev_rx_fifo_size,16,32768,"dev_rx_fifo_size");
++ DWC_OTG_PARAM_ERR(dev_nperio_tx_fifo_size,16,32768,"dev_nperio_tx_fifo_size");
++ DWC_OTG_PARAM_ERR(host_rx_fifo_size,16,32768,"host_rx_fifo_size");
++ DWC_OTG_PARAM_ERR(host_nperio_tx_fifo_size,16,32768,"host_nperio_tx_fifo_size");
++ DWC_OTG_PARAM_ERR(host_perio_tx_fifo_size,16,32768,"host_perio_tx_fifo_size");
++ DWC_OTG_PARAM_ERR(max_transfer_size,2047,524288,"max_transfer_size");
++ DWC_OTG_PARAM_ERR(max_packet_count,15,511,"max_packet_count");
++ DWC_OTG_PARAM_ERR(host_channels,1,16,"host_channels");
++ DWC_OTG_PARAM_ERR(dev_endpoints,1,15,"dev_endpoints");
++ DWC_OTG_PARAM_ERR(phy_type,0,2,"phy_type");
++ DWC_OTG_PARAM_ERR(phy_ulpi_ddr,0,1,"phy_ulpi_ddr");
++ DWC_OTG_PARAM_ERR(phy_ulpi_ext_vbus,0,1,"phy_ulpi_ext_vbus");
++ DWC_OTG_PARAM_ERR(i2c_enable,0,1,"i2c_enable");
++ DWC_OTG_PARAM_ERR(ulpi_fs_ls,0,1,"ulpi_fs_ls");
++ DWC_OTG_PARAM_ERR(ts_dline,0,1,"ts_dline");
++
++ if (dwc_otg_module_params.dma_burst_size != -1) {
++ if (DWC_OTG_PARAM_TEST(dma_burst_size,1,1) &&
++ DWC_OTG_PARAM_TEST(dma_burst_size,4,4) &&
++ DWC_OTG_PARAM_TEST(dma_burst_size,8,8) &&
++ DWC_OTG_PARAM_TEST(dma_burst_size,16,16) &&
++ DWC_OTG_PARAM_TEST(dma_burst_size,32,32) &&
++ DWC_OTG_PARAM_TEST(dma_burst_size,64,64) &&
++ DWC_OTG_PARAM_TEST(dma_burst_size,128,128) &&
++ DWC_OTG_PARAM_TEST(dma_burst_size,256,256)) {
++ DWC_ERROR("`%d' invalid for parameter `dma_burst_size'\n",
++ dwc_otg_module_params.dma_burst_size);
++ dwc_otg_module_params.dma_burst_size = 32;
++ retval++;
++ }
++
++ {
++ uint8_t brst_sz = 0;
++ while(dwc_otg_module_params.dma_burst_size > 1) {
++ brst_sz ++;
++ dwc_otg_module_params.dma_burst_size >>= 1;
++ }
++ dwc_otg_module_params.dma_burst_size = brst_sz;
++ }
++ }
++
++ if (dwc_otg_module_params.phy_utmi_width != -1) {
++ if (DWC_OTG_PARAM_TEST(phy_utmi_width, 8, 8) &&
++ DWC_OTG_PARAM_TEST(phy_utmi_width, 16, 16)) {
++ DWC_ERROR("`%d' invalid for parameter `phy_utmi_width'\n",
++ dwc_otg_module_params.phy_utmi_width);
++ dwc_otg_module_params.phy_utmi_width = 16;
++ retval++;
++ }
++ }
++
++ for (i = 0; i < 15; i++) {
++ /** @todo should be like above */
++ //DWC_OTG_PARAM_ERR(dev_perio_tx_fifo_size[i], 4, 768, "dev_perio_tx_fifo_size");
++ if (dwc_otg_module_params.dev_perio_tx_fifo_size[i] != -1) {
++ if (DWC_OTG_PARAM_TEST(dev_perio_tx_fifo_size[i], 4, 768)) {
++ DWC_ERROR("`%d' invalid for parameter `%s_%d'\n",
++ dwc_otg_module_params.dev_perio_tx_fifo_size[i], "dev_perio_tx_fifo_size", i);
++ dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_param_dev_perio_tx_fifo_size_default;
++ retval++;
++ }
++ }
++ }
++
++ DWC_OTG_PARAM_ERR(en_multiple_tx_fifo, 0, 1, "en_multiple_tx_fifo");
++
++ for (i = 0; i < 15; i++) {
++ /** @todo should be like above */
++ //DWC_OTG_PARAM_ERR(dev_tx_fifo_size[i], 4, 768, "dev_tx_fifo_size");
++ if (dwc_otg_module_params.dev_tx_fifo_size[i] != -1) {
++ if (DWC_OTG_PARAM_TEST(dev_tx_fifo_size[i], 4, 768)) {
++ DWC_ERROR("`%d' invalid for parameter `%s_%d'\n",
++ dwc_otg_module_params.dev_tx_fifo_size[i], "dev_tx_fifo_size", i);
++ dwc_otg_module_params.dev_tx_fifo_size[i] = dwc_param_dev_tx_fifo_size_default;
++ retval++;
++ }
++ }
++ }
++
++ DWC_OTG_PARAM_ERR(thr_ctl, 0, 7, "thr_ctl");
++ DWC_OTG_PARAM_ERR(tx_thr_length, 8, 128, "tx_thr_length");
++ DWC_OTG_PARAM_ERR(rx_thr_length, 8, 128, "rx_thr_length");
++
++ DWC_OTG_PARAM_ERR(pti_enable,0,1,"pti_enable");
++ DWC_OTG_PARAM_ERR(mpi_enable,0,1,"mpi_enable");
++
++ /* At this point, all module parameters that have been set by the user
++ * are valid, and those that have not are left unset. Now set their
++ * default values and/or check the parameters against the hardware
++ * configurations of the OTG core. */
++
++/* This sets the parameter to the default value if it has not been set by the
++ * user */
++#define DWC_OTG_PARAM_SET_DEFAULT(_param_) \
++ ({ \
++ int changed = 1; \
++ if (dwc_otg_module_params._param_ == -1) { \
++ changed = 0; \
++ dwc_otg_module_params._param_ = dwc_param_##_param_##_default; \
++ } \
++ changed; \
++ })
++
++/* This checks the macro agains the hardware configuration to see if it is
++ * valid. It is possible that the default value could be invalid. In this
++ * case, it will report a module error if the user touched the parameter.
++ * Otherwise it will adjust the value without any error. */
++#define DWC_OTG_PARAM_CHECK_VALID(_param_, _str_, _is_valid_, _set_valid_) \
++ ({ \
++ int changed = DWC_OTG_PARAM_SET_DEFAULT(_param_); \
++ int error = 0; \
++ if (!(_is_valid_)) { \
++ if (changed) { \
++ DWC_ERROR("`%d' invalid for parameter `%s'. Check HW configuration.\n", dwc_otg_module_params._param_, _str_); \
++ error = 1; \
++ } \
++ dwc_otg_module_params._param_ = (_set_valid_); \
++ } \
++ error; \
++ })
++
++ /* OTG Cap */
++ retval += DWC_OTG_PARAM_CHECK_VALID(otg_cap, "otg_cap",
++ ({
++ int valid;
++ valid = 1;
++ switch (dwc_otg_module_params.otg_cap) {
++ case DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE:
++ if (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG)
++ valid = 0;
++ break;
++ case DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE:
++ if ((core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) &&
++ (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) &&
++ (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) &&
++ (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) {
++ valid = 0;
++ }
++ break;
++ case DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE:
++ /* always valid */
++ break;
++ }
++ valid;
++ }),
++ (((core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) ||
++ (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) ||
++ (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) ||
++ (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) ?
++ DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE :
++ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE));
++
++ retval += DWC_OTG_PARAM_CHECK_VALID(dma_enable, "dma_enable",
++ ((dwc_otg_module_params.dma_enable == 1) && (core_if->hwcfg2.b.architecture == 0)) ? 0 : 1,
++ 0);
++
++ retval += DWC_OTG_PARAM_CHECK_VALID(dma_desc_enable, "dma_desc_enable",
++ ((dwc_otg_module_params.dma_desc_enable == 1) &&
++ ((dwc_otg_module_params.dma_enable == 0) || (core_if->hwcfg4.b.desc_dma == 0))) ? 0 : 1,
++ 0);
++
++ retval += DWC_OTG_PARAM_CHECK_VALID(opt, "opt", 1, 0);
++
++ DWC_OTG_PARAM_SET_DEFAULT(dma_burst_size);
++
++ retval += DWC_OTG_PARAM_CHECK_VALID(host_support_fs_ls_low_power,
++ "host_support_fs_ls_low_power",
++ 1, 0);
++
++ retval += DWC_OTG_PARAM_CHECK_VALID(enable_dynamic_fifo,
++ "enable_dynamic_fifo",
++ ((dwc_otg_module_params.enable_dynamic_fifo == 0) ||
++ (core_if->hwcfg2.b.dynamic_fifo == 1)), 0);
++
++ retval += DWC_OTG_PARAM_CHECK_VALID(data_fifo_size,
++ "data_fifo_size",
++ (dwc_otg_module_params.data_fifo_size <= core_if->hwcfg3.b.dfifo_depth),
++ core_if->hwcfg3.b.dfifo_depth);
++
++ retval += DWC_OTG_PARAM_CHECK_VALID(dev_rx_fifo_size,
++ "dev_rx_fifo_size",
++ (dwc_otg_module_params.dev_rx_fifo_size <= dwc_read_reg32(&core_if->core_global_regs->grxfsiz)),
++ dwc_read_reg32(&core_if->core_global_regs->grxfsiz));
++
++ retval += DWC_OTG_PARAM_CHECK_VALID(dev_nperio_tx_fifo_size,
++ "dev_nperio_tx_fifo_size",
++ (dwc_otg_module_params.dev_nperio_tx_fifo_size <= (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16)),
++ (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16));
++
++ retval += DWC_OTG_PARAM_CHECK_VALID(host_rx_fifo_size,
++ "host_rx_fifo_size",
++ (dwc_otg_module_params.host_rx_fifo_size <= dwc_read_reg32(&core_if->core_global_regs->grxfsiz)),
++ dwc_read_reg32(&core_if->core_global_regs->grxfsiz));
++
++ retval += DWC_OTG_PARAM_CHECK_VALID(host_nperio_tx_fifo_size,
++ "host_nperio_tx_fifo_size",
++ (dwc_otg_module_params.host_nperio_tx_fifo_size <= (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16)),
++ (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16));
++
++ retval += DWC_OTG_PARAM_CHECK_VALID(host_perio_tx_fifo_size,
++ "host_perio_tx_fifo_size",
++ (dwc_otg_module_params.host_perio_tx_fifo_size <= ((dwc_read_reg32(&core_if->core_global_regs->hptxfsiz) >> 16))),
++ ((dwc_read_reg32(&core_if->core_global_regs->hptxfsiz) >> 16)));
++
++ retval += DWC_OTG_PARAM_CHECK_VALID(max_transfer_size,
++ "max_transfer_size",
++ (dwc_otg_module_params.max_transfer_size < (1 << (core_if->hwcfg3.b.xfer_size_cntr_width + 11))),
++ ((1 << (core_if->hwcfg3.b.xfer_size_cntr_width + 11)) - 1));
++
++ retval += DWC_OTG_PARAM_CHECK_VALID(max_packet_count,
++ "max_packet_count",
++ (dwc_otg_module_params.max_packet_count < (1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4))),
++ ((1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4)) - 1));
++
++ retval += DWC_OTG_PARAM_CHECK_VALID(host_channels,
++ "host_channels",
++ (dwc_otg_module_params.host_channels <= (core_if->hwcfg2.b.num_host_chan + 1)),
++ (core_if->hwcfg2.b.num_host_chan + 1));
++
++ retval += DWC_OTG_PARAM_CHECK_VALID(dev_endpoints,
++ "dev_endpoints",
++ (dwc_otg_module_params.dev_endpoints <= (core_if->hwcfg2.b.num_dev_ep)),
++ core_if->hwcfg2.b.num_dev_ep);
++
++/*
++ * Define the following to disable the FS PHY Hardware checking. This is for
++ * internal testing only.
++ *
++ * #define NO_FS_PHY_HW_CHECKS
++ */
++
++#ifdef NO_FS_PHY_HW_CHECKS
++ retval += DWC_OTG_PARAM_CHECK_VALID(phy_type,
++ "phy_type", 1, 0);
++#else
++ retval += DWC_OTG_PARAM_CHECK_VALID(phy_type,
++ "phy_type",
++ ({
++ int valid = 0;
++ if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_UTMI) &&
++ ((core_if->hwcfg2.b.hs_phy_type == 1) ||
++ (core_if->hwcfg2.b.hs_phy_type == 3))) {
++ valid = 1;
++ }
++ else if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_ULPI) &&
++ ((core_if->hwcfg2.b.hs_phy_type == 2) ||
++ (core_if->hwcfg2.b.hs_phy_type == 3))) {
++ valid = 1;
++ }
++ else if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) &&
++ (core_if->hwcfg2.b.fs_phy_type == 1)) {
++ valid = 1;
++ }
++ valid;
++ }),
++ ({
++ int set = DWC_PHY_TYPE_PARAM_FS;
++ if (core_if->hwcfg2.b.hs_phy_type) {
++ if ((core_if->hwcfg2.b.hs_phy_type == 3) ||
++ (core_if->hwcfg2.b.hs_phy_type == 1)) {
++ set = DWC_PHY_TYPE_PARAM_UTMI;
++ }
++ else {
++ set = DWC_PHY_TYPE_PARAM_ULPI;
++ }
++ }
++ set;
++ }));
++#endif
++
++ retval += DWC_OTG_PARAM_CHECK_VALID(speed, "speed",
++ (dwc_otg_module_params.speed == 0) && (dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? 0 : 1,
++ dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS ? 1 : 0);
++
++ retval += DWC_OTG_PARAM_CHECK_VALID(host_ls_low_power_phy_clk,
++ "host_ls_low_power_phy_clk",
++ ((dwc_otg_module_params.host_ls_low_power_phy_clk == DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ) && (dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? 0 : 1),
++ ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ : DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ));
++
++ DWC_OTG_PARAM_SET_DEFAULT(phy_ulpi_ddr);
++ DWC_OTG_PARAM_SET_DEFAULT(phy_ulpi_ext_vbus);
++ DWC_OTG_PARAM_SET_DEFAULT(phy_utmi_width);
++ DWC_OTG_PARAM_SET_DEFAULT(ulpi_fs_ls);
++ DWC_OTG_PARAM_SET_DEFAULT(ts_dline);
++
++#ifdef NO_FS_PHY_HW_CHECKS
++ retval += DWC_OTG_PARAM_CHECK_VALID(i2c_enable, "i2c_enable", 1, 0);
++#else
++ retval += DWC_OTG_PARAM_CHECK_VALID(i2c_enable,
++ "i2c_enable",
++ (dwc_otg_module_params.i2c_enable == 1) && (core_if->hwcfg3.b.i2c == 0) ? 0 : 1,
++ 0);
++#endif
++
++ for (i = 0; i < 15; i++) {
++ int changed = 1;
++ int error = 0;
++
++ if (dwc_otg_module_params.dev_perio_tx_fifo_size[i] == -1) {
++ changed = 0;
++ dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_param_dev_perio_tx_fifo_size_default;
++ }
++ if (!(dwc_otg_module_params.dev_perio_tx_fifo_size[i] <= (dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i])))) {
++ if (changed) {
++ DWC_ERROR("`%d' invalid for parameter `dev_perio_fifo_size_%d'. Check HW configuration.\n", dwc_otg_module_params.dev_perio_tx_fifo_size[i], i);
++ error = 1;
++ }
++ dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i]);
++ }
++ retval += error;
++ }
++
++ retval += DWC_OTG_PARAM_CHECK_VALID(en_multiple_tx_fifo, "en_multiple_tx_fifo",
++ ((dwc_otg_module_params.en_multiple_tx_fifo == 1) && (core_if->hwcfg4.b.ded_fifo_en == 0)) ? 0 : 1,
++ 0);
++
++ for (i = 0; i < 15; i++) {
++ int changed = 1;
++ int error = 0;
++
++ if (dwc_otg_module_params.dev_tx_fifo_size[i] == -1) {
++ changed = 0;
++ dwc_otg_module_params.dev_tx_fifo_size[i] = dwc_param_dev_tx_fifo_size_default;
++ }
++ if (!(dwc_otg_module_params.dev_tx_fifo_size[i] <= (dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i])))) {
++ if (changed) {
++ DWC_ERROR("%d' invalid for parameter `dev_perio_fifo_size_%d'. Check HW configuration.\n", dwc_otg_module_params.dev_tx_fifo_size[i], i);
++ error = 1;
++ }
++ dwc_otg_module_params.dev_tx_fifo_size[i] = dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i]);
++ }
++ retval += error;
++ }
++
++ retval += DWC_OTG_PARAM_CHECK_VALID(thr_ctl, "thr_ctl",
++ ((dwc_otg_module_params.thr_ctl != 0) && ((dwc_otg_module_params.dma_enable == 0) || (core_if->hwcfg4.b.ded_fifo_en == 0))) ? 0 : 1,
++ 0);
++
++ DWC_OTG_PARAM_SET_DEFAULT(tx_thr_length);
++ DWC_OTG_PARAM_SET_DEFAULT(rx_thr_length);
++
++ retval += DWC_OTG_PARAM_CHECK_VALID(pti_enable, "pti_enable",
++ ((dwc_otg_module_params.pti_enable == 0) || ((dwc_otg_module_params.pti_enable == 1) && (core_if->snpsid >= 0x4F54272A))) ? 1 : 0,
++ 0);
++
++ retval += DWC_OTG_PARAM_CHECK_VALID(mpi_enable, "mpi_enable",
++ ((dwc_otg_module_params.mpi_enable == 0) || ((dwc_otg_module_params.mpi_enable == 1) && (core_if->hwcfg2.b.multi_proc_int == 1))) ? 1 : 0,
++ 0);
++ return retval;
++}
++
++/**
++ * This function is the top level interrupt handler for the Common
++ * (Device and host modes) interrupts.
++ */
++static irqreturn_t dwc_otg_common_irq(int irq, void *dev
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19)
++ , struct pt_regs *r
++#endif
++ )
++{
++ dwc_otg_device_t *otg_dev = dev;
++ int32_t retval = IRQ_NONE;
++
++ retval = dwc_otg_handle_common_intr(otg_dev->core_if);
++ return IRQ_RETVAL(retval);
++}
++
++/**
++ * This function is called when a platform_device is unregistered with the
++ * dwc_otg_driver. This happens, for example, when the rmmod command is
++ * executed. The device may or may not be electrically present. If it is
++ * present, the driver stops device processing. Any resources used on behalf
++ * of this device are freed.
++ *
++ * @param[in] pdev
++ */
++static int dwc_otg_driver_remove(struct platform_device *pdev)
++{
++ dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);
++ DWC_DEBUGPL(DBG_ANY, "%s(%p)\n", __func__, pdev);
++
++ if (!otg_dev) {
++ /* Memory allocation for the dwc_otg_device failed. */
++ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev NULL!\n", __func__);
++ return 0;
++ }
++
++ /*
++ * Free the IRQ
++ */
++ if (otg_dev->common_irq_installed) {
++ free_irq(otg_dev->irq, otg_dev);
++ }
++
++#ifndef DWC_DEVICE_ONLY
++ if (otg_dev->hcd) {
++ dwc_otg_hcd_remove(&pdev->dev);
++ } else {
++ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->hcd NULL!\n", __func__);
++ return 0;
++ }
++#endif
++
++#ifndef DWC_HOST_ONLY
++ if (otg_dev->pcd) {
++ dwc_otg_pcd_remove(&pdev->dev);
++ }
++#endif
++ if (otg_dev->core_if) {
++ dwc_otg_cil_remove(otg_dev->core_if);
++ }
++
++ /*
++ * Remove the device attributes
++ */
++ dwc_otg_attr_remove(otg_dev->parent);
++
++ /* Disable USB port */
++ dwc_write_reg32((uint32_t *)((uint8_t *)otg_dev->base + 0xe00), 0xf);
++
++ /*
++ * Return the memory.
++ */
++ if (otg_dev->base) {
++ iounmap(otg_dev->base);
++ }
++
++ if (otg_dev->phys_addr != 0) {
++ release_mem_region(otg_dev->phys_addr, otg_dev->base_len);
++ }
++
++ kfree(otg_dev);
++
++ /*
++ * Clear the drvdata pointer.
++ */
++ platform_set_drvdata(pdev, NULL);
++
++ return 0;
++}
++
++/**
++ * This function is called when an platform_device is bound to a
++ * dwc_otg_driver. It creates the driver components required to
++ * control the device (CIL, HCD, and PCD) and it initializes the
++ * device. The driver components are stored in a dwc_otg_device
++ * structure. A reference to the dwc_otg_device is saved in the
++ * platform_device. This allows the driver to access the dwc_otg_device
++ * structure on subsequent calls to driver methods for this device.
++ *
++ * @param[in] pdev platform_device definition
++ */
++static int dwc_otg_driver_probe(struct platform_device *pdev)
++{
++ int retval = 0;
++ uint32_t snpsid;
++ dwc_otg_device_t *otg_dev;
++ struct resource *res;
++
++ dev_dbg(&pdev->dev, "dwc_otg_driver_probe(%p)\n", pdev);
++
++ otg_dev= kzalloc(sizeof(dwc_otg_device_t), GFP_KERNEL);
++ if (!otg_dev) {
++ dev_err(&pdev->dev, "kmalloc of dwc_otg_device failed\n");
++ retval = -ENOMEM;
++ goto fail;
++ }
++
++ otg_dev->reg_offset = 0xFFFFFFFF;
++
++ /*
++ * Retrieve the memory and IRQ resources.
++ */
++ otg_dev->irq = platform_get_irq(pdev, 0);
++ if (otg_dev->irq <= 0) {
++ dev_err(&pdev->dev, "no device irq\n");
++ retval = -EINVAL;
++ goto fail;
++ }
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (res == NULL) {
++ dev_err(&pdev->dev, "no CSR address\n");
++ retval = -EINVAL;
++ goto fail;
++ }
++
++ otg_dev->parent = &pdev->dev;
++ otg_dev->phys_addr = res->start;
++ otg_dev->base_len = res->end - res->start + 1;
++ if (request_mem_region(otg_dev->phys_addr,
++ otg_dev->base_len,
++ dwc_driver_name) == NULL) {
++ dev_err(&pdev->dev, "request_mem_region failed\n");
++ retval = -EBUSY;
++ goto fail;
++ }
++
++ /*
++ * Map the DWC_otg Core memory into virtual address space.
++ */
++ otg_dev->base = ioremap(otg_dev->phys_addr, otg_dev->base_len);
++ if (!otg_dev->base) {
++ dev_err(&pdev->dev, "ioremap() failed\n");
++ retval = -ENOMEM;
++ goto fail;
++ }
++ dev_dbg(&pdev->dev, "mapped base=0x%08x\n", (unsigned) otg_dev->base);
++
++ /* Enable USB Port */
++ dwc_write_reg32((uint32_t *)((uint8_t *)otg_dev->base + 0xe00), 0);
++
++ /*
++ * Attempt to ensure this device is really a DWC_otg Controller.
++ * Read and verify the SNPSID register contents. The value should be
++ * 0x45F42XXX, which corresponds to "OT2", as in "OTG version 2.XX".
++ */
++ snpsid = dwc_read_reg32((uint32_t *)((uint8_t *)otg_dev->base + 0x40));
++
++ if ((snpsid & 0xFFFFF000) != OTG_CORE_REV_2_00) {
++ dev_err(&pdev->dev, "Bad value for SNPSID: 0x%08x\n", snpsid);
++ retval = -EINVAL;
++ goto fail;
++ }
++
++ DWC_PRINT("Core Release: %x.%x%x%x\n",
++ (snpsid >> 12 & 0xF),
++ (snpsid >> 8 & 0xF),
++ (snpsid >> 4 & 0xF),
++ (snpsid & 0xF));
++
++ /*
++ * Initialize driver data to point to the global DWC_otg
++ * Device structure.
++ */
++ platform_set_drvdata(pdev, otg_dev);
++ dev_dbg(&pdev->dev, "dwc_otg_device=0x%p\n", otg_dev);
++
++
++ otg_dev->core_if = dwc_otg_cil_init(otg_dev->base,
++ &dwc_otg_module_params);
++
++ otg_dev->core_if->snpsid = snpsid;
++
++ if (!otg_dev->core_if) {
++ dev_err(&pdev->dev, "CIL initialization failed!\n");
++ retval = -ENOMEM;
++ goto fail;
++ }
++
++ /*
++ * Validate parameter values.
++ */
++ if (check_parameters(otg_dev->core_if)) {
++ retval = -EINVAL;
++ goto fail;
++ }
++
++ /*
++ * Create Device Attributes in sysfs
++ */
++ //dwc_otg_attr_create(&pdev->dev);
++
++ /*
++ * Disable the global interrupt until all the interrupt
++ * handlers are installed.
++ */
++ dwc_otg_disable_global_interrupts(otg_dev->core_if);
++
++ /*
++ * Install the interrupt handler for the common interrupts before
++ * enabling common interrupts in core_init below.
++ */
++ DWC_DEBUGPL(DBG_CIL, "registering (common) handler for irq%d\n",
++ otg_dev->irq);
++ retval = request_irq(otg_dev->irq, dwc_otg_common_irq,
++ IRQF_SHARED, "dwc_otg", otg_dev);
++ if (retval) {
++ DWC_ERROR("request of irq%d failed\n", otg_dev->irq);
++ retval = -EBUSY;
++ goto fail;
++ } else {
++ otg_dev->common_irq_installed = 1;
++ }
++
++ /*
++ * Initialize the DWC_otg core.
++ */
++ dwc_otg_core_init(otg_dev->core_if);
++
++#ifndef DWC_HOST_ONLY
++ /*
++ * Initialize the PCD
++ */
++ retval = dwc_otg_pcd_init(&pdev->dev);
++ if (retval != 0) {
++ DWC_ERROR("dwc_otg_pcd_init failed\n");
++ otg_dev->pcd = NULL;
++ goto fail;
++ }
++#endif
++#ifndef DWC_DEVICE_ONLY
++ /*
++ * Initialize the HCD
++ */
++ retval = dwc_otg_hcd_init(&pdev->dev);
++ if (retval != 0) {
++ DWC_ERROR("dwc_otg_hcd_init failed\n");
++ otg_dev->hcd = NULL;
++ goto fail;
++ }
++#endif
++
++ /*
++ * Enable the global interrupt after all the interrupt
++ * handlers are installed.
++ */
++ dwc_otg_enable_global_interrupts(otg_dev->core_if);
++
++ return 0;
++
++ fail:
++ dwc_otg_driver_remove(pdev);
++ return retval;
++}
++
++/**
++ * This structure defines the methods to be called by a bus driver
++ * during the lifecycle of a device on that bus. Both drivers and
++ * devices are registered with a bus driver. The bus driver matches
++ * devices to drivers based on information in the device and driver
++ * structures.
++ *
++ * The probe function is called when the bus driver matches a device
++ * to this driver. The remove function is called when a device is
++ * unregistered with the bus driver.
++ */
++
++static const struct of_device_id ralink_otg_match[] = {
++ { .compatible = "ralink,rt3050-otg" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, ralink_otg_match);
++
++static struct platform_driver dwc_otg_driver = {
++ .driver = {
++ .name = (char *)dwc_driver_name,
++ .of_match_table = ralink_otg_match,
++ },
++ .probe = dwc_otg_driver_probe,
++ .remove = dwc_otg_driver_remove,
++};
++
++/**
++ * This function is called when the dwc_otg_driver is installed with the
++ * insmod command. It registers the dwc_otg_driver structure with the
++ * appropriate bus driver. This will cause the dwc_otg_driver_probe function
++ * to be called. In addition, the bus driver will automatically expose
++ * attributes defined for the device and driver in the special sysfs file
++ * system.
++ *
++ * @return
++ */
++static int __init dwc_otg_driver_init(void)
++{
++ int retval = 0;
++ int error;
++
++ printk(KERN_INFO "%s: version %s\n", dwc_driver_name, DWC_DRIVER_VERSION);
++
++ retval = platform_driver_register(&dwc_otg_driver);
++ if (retval) {
++ printk(KERN_ERR "%s retval=%d\n", __func__, retval);
++ return retval;
++ }
++
++ error = driver_create_file(&dwc_otg_driver.driver, &driver_attr_version);
++ error = driver_create_file(&dwc_otg_driver.driver, &driver_attr_debuglevel);
++
++ return retval;
++}
++module_init(dwc_otg_driver_init);
++
++/**
++ * This function is called when the driver is removed from the kernel
++ * with the rmmod command. The driver unregisters itself with its bus
++ * driver.
++ *
++ */
++static void __exit dwc_otg_driver_cleanup(void)
++{
++ printk(KERN_DEBUG "dwc_otg_driver_cleanup()\n");
++
++ driver_remove_file(&dwc_otg_driver.driver, &driver_attr_debuglevel);
++ driver_remove_file(&dwc_otg_driver.driver, &driver_attr_version);
++
++ platform_driver_unregister(&dwc_otg_driver);
++
++ printk(KERN_INFO "%s module removed\n", dwc_driver_name);
++}
++module_exit(dwc_otg_driver_cleanup);
++
++MODULE_DESCRIPTION(DWC_DRIVER_DESC);
++MODULE_AUTHOR("Synopsys Inc.");
++MODULE_LICENSE("GPL");
++
++module_param_named(otg_cap, dwc_otg_module_params.otg_cap, int, 0444);
++MODULE_PARM_DESC(otg_cap, "OTG Capabilities 0=HNP&SRP 1=SRP Only 2=None");
++module_param_named(opt, dwc_otg_module_params.opt, int, 0444);
++MODULE_PARM_DESC(opt, "OPT Mode");
++module_param_named(dma_enable, dwc_otg_module_params.dma_enable, int, 0444);
++MODULE_PARM_DESC(dma_enable, "DMA Mode 0=Slave 1=DMA enabled");
++
++module_param_named(dma_desc_enable, dwc_otg_module_params.dma_desc_enable, int, 0444);
++MODULE_PARM_DESC(dma_desc_enable, "DMA Desc Mode 0=Address DMA 1=DMA Descriptor enabled");
++
++module_param_named(dma_burst_size, dwc_otg_module_params.dma_burst_size, int, 0444);
++MODULE_PARM_DESC(dma_burst_size, "DMA Burst Size 1, 4, 8, 16, 32, 64, 128, 256");
++module_param_named(speed, dwc_otg_module_params.speed, int, 0444);
++MODULE_PARM_DESC(speed, "Speed 0=High Speed 1=Full Speed");
++module_param_named(host_support_fs_ls_low_power, dwc_otg_module_params.host_support_fs_ls_low_power, int, 0444);
++MODULE_PARM_DESC(host_support_fs_ls_low_power, "Support Low Power w/FS or LS 0=Support 1=Don't Support");
++module_param_named(host_ls_low_power_phy_clk, dwc_otg_module_params.host_ls_low_power_phy_clk, int, 0444);
++MODULE_PARM_DESC(host_ls_low_power_phy_clk, "Low Speed Low Power Clock 0=48Mhz 1=6Mhz");
++module_param_named(enable_dynamic_fifo, dwc_otg_module_params.enable_dynamic_fifo, int, 0444);
++MODULE_PARM_DESC(enable_dynamic_fifo, "0=cC Setting 1=Allow Dynamic Sizing");
++module_param_named(data_fifo_size, dwc_otg_module_params.data_fifo_size, int, 0444);
++MODULE_PARM_DESC(data_fifo_size, "Total number of words in the data FIFO memory 32-32768");
++module_param_named(dev_rx_fifo_size, dwc_otg_module_params.dev_rx_fifo_size, int, 0444);
++MODULE_PARM_DESC(dev_rx_fifo_size, "Number of words in the Rx FIFO 16-32768");
++module_param_named(dev_nperio_tx_fifo_size, dwc_otg_module_params.dev_nperio_tx_fifo_size, int, 0444);
++MODULE_PARM_DESC(dev_nperio_tx_fifo_size, "Number of words in the non-periodic Tx FIFO 16-32768");
++module_param_named(dev_perio_tx_fifo_size_1, dwc_otg_module_params.dev_perio_tx_fifo_size[0], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_1, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_2, dwc_otg_module_params.dev_perio_tx_fifo_size[1], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_2, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_3, dwc_otg_module_params.dev_perio_tx_fifo_size[2], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_3, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_4, dwc_otg_module_params.dev_perio_tx_fifo_size[3], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_4, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_5, dwc_otg_module_params.dev_perio_tx_fifo_size[4], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_5, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_6, dwc_otg_module_params.dev_perio_tx_fifo_size[5], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_6, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_7, dwc_otg_module_params.dev_perio_tx_fifo_size[6], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_7, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_8, dwc_otg_module_params.dev_perio_tx_fifo_size[7], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_8, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_9, dwc_otg_module_params.dev_perio_tx_fifo_size[8], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_9, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_10, dwc_otg_module_params.dev_perio_tx_fifo_size[9], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_10, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_11, dwc_otg_module_params.dev_perio_tx_fifo_size[10], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_11, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_12, dwc_otg_module_params.dev_perio_tx_fifo_size[11], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_12, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_13, dwc_otg_module_params.dev_perio_tx_fifo_size[12], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_13, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_14, dwc_otg_module_params.dev_perio_tx_fifo_size[13], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_14, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_15, dwc_otg_module_params.dev_perio_tx_fifo_size[14], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_15, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(host_rx_fifo_size, dwc_otg_module_params.host_rx_fifo_size, int, 0444);
++MODULE_PARM_DESC(host_rx_fifo_size, "Number of words in the Rx FIFO 16-32768");
++module_param_named(host_nperio_tx_fifo_size, dwc_otg_module_params.host_nperio_tx_fifo_size, int, 0444);
++MODULE_PARM_DESC(host_nperio_tx_fifo_size, "Number of words in the non-periodic Tx FIFO 16-32768");
++module_param_named(host_perio_tx_fifo_size, dwc_otg_module_params.host_perio_tx_fifo_size, int, 0444);
++MODULE_PARM_DESC(host_perio_tx_fifo_size, "Number of words in the host periodic Tx FIFO 16-32768");
++module_param_named(max_transfer_size, dwc_otg_module_params.max_transfer_size, int, 0444);
++/** @todo Set the max to 512K, modify checks */
++MODULE_PARM_DESC(max_transfer_size, "The maximum transfer size supported in bytes 2047-65535");
++module_param_named(max_packet_count, dwc_otg_module_params.max_packet_count, int, 0444);
++MODULE_PARM_DESC(max_packet_count, "The maximum number of packets in a transfer 15-511");
++module_param_named(host_channels, dwc_otg_module_params.host_channels, int, 0444);
++MODULE_PARM_DESC(host_channels, "The number of host channel registers to use 1-16");
++module_param_named(dev_endpoints, dwc_otg_module_params.dev_endpoints, int, 0444);
++MODULE_PARM_DESC(dev_endpoints, "The number of endpoints in addition to EP0 available for device mode 1-15");
++module_param_named(phy_type, dwc_otg_module_params.phy_type, int, 0444);
++MODULE_PARM_DESC(phy_type, "0=Reserved 1=UTMI+ 2=ULPI");
++module_param_named(phy_utmi_width, dwc_otg_module_params.phy_utmi_width, int, 0444);
++MODULE_PARM_DESC(phy_utmi_width, "Specifies the UTMI+ Data Width 8 or 16 bits");
++module_param_named(phy_ulpi_ddr, dwc_otg_module_params.phy_ulpi_ddr, int, 0444);
++MODULE_PARM_DESC(phy_ulpi_ddr, "ULPI at double or single data rate 0=Single 1=Double");
++module_param_named(phy_ulpi_ext_vbus, dwc_otg_module_params.phy_ulpi_ext_vbus, int, 0444);
++MODULE_PARM_DESC(phy_ulpi_ext_vbus, "ULPI PHY using internal or external vbus 0=Internal");
++module_param_named(i2c_enable, dwc_otg_module_params.i2c_enable, int, 0444);
++MODULE_PARM_DESC(i2c_enable, "FS PHY Interface");
++module_param_named(ulpi_fs_ls, dwc_otg_module_params.ulpi_fs_ls, int, 0444);
++MODULE_PARM_DESC(ulpi_fs_ls, "ULPI PHY FS/LS mode only");
++module_param_named(ts_dline, dwc_otg_module_params.ts_dline, int, 0444);
++MODULE_PARM_DESC(ts_dline, "Term select Dline pulsing for all PHYs");
++module_param_named(debug, g_dbg_lvl, int, 0444);
++MODULE_PARM_DESC(debug, "");
++
++module_param_named(en_multiple_tx_fifo, dwc_otg_module_params.en_multiple_tx_fifo, int, 0444);
++MODULE_PARM_DESC(en_multiple_tx_fifo, "Dedicated Non Periodic Tx FIFOs 0=disabled 1=enabled");
++module_param_named(dev_tx_fifo_size_1, dwc_otg_module_params.dev_tx_fifo_size[0], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_1, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_2, dwc_otg_module_params.dev_tx_fifo_size[1], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_2, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_3, dwc_otg_module_params.dev_tx_fifo_size[2], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_3, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_4, dwc_otg_module_params.dev_tx_fifo_size[3], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_4, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_5, dwc_otg_module_params.dev_tx_fifo_size[4], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_5, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_6, dwc_otg_module_params.dev_tx_fifo_size[5], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_6, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_7, dwc_otg_module_params.dev_tx_fifo_size[6], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_7, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_8, dwc_otg_module_params.dev_tx_fifo_size[7], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_8, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_9, dwc_otg_module_params.dev_tx_fifo_size[8], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_9, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_10, dwc_otg_module_params.dev_tx_fifo_size[9], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_10, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_11, dwc_otg_module_params.dev_tx_fifo_size[10], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_11, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_12, dwc_otg_module_params.dev_tx_fifo_size[11], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_12, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_13, dwc_otg_module_params.dev_tx_fifo_size[12], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_13, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_14, dwc_otg_module_params.dev_tx_fifo_size[13], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_14, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_15, dwc_otg_module_params.dev_tx_fifo_size[14], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_15, "Number of words in the Tx FIFO 4-768");
++
++module_param_named(thr_ctl, dwc_otg_module_params.thr_ctl, int, 0444);
++MODULE_PARM_DESC(thr_ctl, "Thresholding enable flag bit 0 - non ISO Tx thr., 1 - ISO Tx thr., 2 - Rx thr.- bit 0=disabled 1=enabled");
++module_param_named(tx_thr_length, dwc_otg_module_params.tx_thr_length, int, 0444);
++MODULE_PARM_DESC(tx_thr_length, "Tx Threshold length in 32 bit DWORDs");
++module_param_named(rx_thr_length, dwc_otg_module_params.rx_thr_length, int, 0444);
++MODULE_PARM_DESC(rx_thr_length, "Rx Threshold length in 32 bit DWORDs");
++
++module_param_named(pti_enable, dwc_otg_module_params.pti_enable, int, 0444);
++MODULE_PARM_DESC(pti_enable, "Per Transfer Interrupt mode 0=disabled 1=enabled");
++
++module_param_named(mpi_enable, dwc_otg_module_params.mpi_enable, int, 0444);
++MODULE_PARM_DESC(mpi_enable, "Multiprocessor Interrupt mode 0=disabled 1=enabled");
++
++/** @page "Module Parameters"
++ *
++ * The following parameters may be specified when starting the module.
++ * These parameters define how the DWC_otg controller should be
++ * configured. Parameter values are passed to the CIL initialization
++ * function dwc_otg_cil_init
++ *
++ * Example: <code>modprobe dwc_otg speed=1 otg_cap=1</code>
++ *
++
++ <table>
++ <tr><td>Parameter Name</td><td>Meaning</td></tr>
++
++ <tr>
++ <td>otg_cap</td>
++ <td>Specifies the OTG capabilities. The driver will automatically detect the
++ value for this parameter if none is specified.
++ - 0: HNP and SRP capable (default, if available)
++ - 1: SRP Only capable
++ - 2: No HNP/SRP capable
++ </td></tr>
++
++ <tr>
++ <td>dma_enable</td>
++ <td>Specifies whether to use slave or DMA mode for accessing the data FIFOs.
++ The driver will automatically detect the value for this parameter if none is
++ specified.
++ - 0: Slave
++ - 1: DMA (default, if available)
++ </td></tr>
++
++ <tr>
++ <td>dma_burst_size</td>
++ <td>The DMA Burst size (applicable only for External DMA Mode).
++ - Values: 1, 4, 8 16, 32, 64, 128, 256 (default 32)
++ </td></tr>
++
++ <tr>
++ <td>speed</td>
++ <td>Specifies the maximum speed of operation in host and device mode. The
++ actual speed depends on the speed of the attached device and the value of
++ phy_type.
++ - 0: High Speed (default)
++ - 1: Full Speed
++ </td></tr>
++
++ <tr>
++ <td>host_support_fs_ls_low_power</td>
++ <td>Specifies whether low power mode is supported when attached to a Full
++ Speed or Low Speed device in host mode.
++ - 0: Don't support low power mode (default)
++ - 1: Support low power mode
++ </td></tr>
++
++ <tr>
++ <td>host_ls_low_power_phy_clk</td>
++ <td>Specifies the PHY clock rate in low power mode when connected to a Low
++ Speed device in host mode. This parameter is applicable only if
++ HOST_SUPPORT_FS_LS_LOW_POWER is enabled.
++ - 0: 48 MHz (default)
++ - 1: 6 MHz
++ </td></tr>
++
++ <tr>
++ <td>enable_dynamic_fifo</td>
++ <td> Specifies whether FIFOs may be resized by the driver software.
++ - 0: Use cC FIFO size parameters
++ - 1: Allow dynamic FIFO sizing (default)
++ </td></tr>
++
++ <tr>
++ <td>data_fifo_size</td>
++ <td>Total number of 4-byte words in the data FIFO memory. This memory
++ includes the Rx FIFO, non-periodic Tx FIFO, and periodic Tx FIFOs.
++ - Values: 32 to 32768 (default 8192)
++
++ Note: The total FIFO memory depth in the FPGA configuration is 8192.
++ </td></tr>
++
++ <tr>
++ <td>dev_rx_fifo_size</td>
++ <td>Number of 4-byte words in the Rx FIFO in device mode when dynamic
++ FIFO sizing is enabled.
++ - Values: 16 to 32768 (default 1064)
++ </td></tr>
++
++ <tr>
++ <td>dev_nperio_tx_fifo_size</td>
++ <td>Number of 4-byte words in the non-periodic Tx FIFO in device mode when
++ dynamic FIFO sizing is enabled.
++ - Values: 16 to 32768 (default 1024)
++ </td></tr>
++
++ <tr>
++ <td>dev_perio_tx_fifo_size_n (n = 1 to 15)</td>
++ <td>Number of 4-byte words in each of the periodic Tx FIFOs in device mode
++ when dynamic FIFO sizing is enabled.
++ - Values: 4 to 768 (default 256)
++ </td></tr>
++
++ <tr>
++ <td>host_rx_fifo_size</td>
++ <td>Number of 4-byte words in the Rx FIFO in host mode when dynamic FIFO
++ sizing is enabled.
++ - Values: 16 to 32768 (default 1024)
++ </td></tr>
++
++ <tr>
++ <td>host_nperio_tx_fifo_size</td>
++ <td>Number of 4-byte words in the non-periodic Tx FIFO in host mode when
++ dynamic FIFO sizing is enabled in the core.
++ - Values: 16 to 32768 (default 1024)
++ </td></tr>
++
++ <tr>
++ <td>host_perio_tx_fifo_size</td>
++ <td>Number of 4-byte words in the host periodic Tx FIFO when dynamic FIFO
++ sizing is enabled.
++ - Values: 16 to 32768 (default 1024)
++ </td></tr>
++
++ <tr>
++ <td>max_transfer_size</td>
++ <td>The maximum transfer size supported in bytes.
++ - Values: 2047 to 65,535 (default 65,535)
++ </td></tr>
++
++ <tr>
++ <td>max_packet_count</td>
++ <td>The maximum number of packets in a transfer.
++ - Values: 15 to 511 (default 511)
++ </td></tr>
++
++ <tr>
++ <td>host_channels</td>
++ <td>The number of host channel registers to use.
++ - Values: 1 to 16 (default 12)
++
++ Note: The FPGA configuration supports a maximum of 12 host channels.
++ </td></tr>
++
++ <tr>
++ <td>dev_endpoints</td>
++ <td>The number of endpoints in addition to EP0 available for device mode
++ operations.
++ - Values: 1 to 15 (default 6 IN and OUT)
++
++ Note: The FPGA configuration supports a maximum of 6 IN and OUT endpoints in
++ addition to EP0.
++ </td></tr>
++
++ <tr>
++ <td>phy_type</td>
++ <td>Specifies the type of PHY interface to use. By default, the driver will
++ automatically detect the phy_type.
++ - 0: Full Speed
++ - 1: UTMI+ (default, if available)
++ - 2: ULPI
++ </td></tr>
++
++ <tr>
++ <td>phy_utmi_width</td>
++ <td>Specifies the UTMI+ Data Width. This parameter is applicable for a
++ phy_type of UTMI+. Also, this parameter is applicable only if the
++ OTG_HSPHY_WIDTH cC parameter was set to "8 and 16 bits", meaning that the
++ core has been configured to work at either data path width.
++ - Values: 8 or 16 bits (default 16)
++ </td></tr>
++
++ <tr>
++ <td>phy_ulpi_ddr</td>
++ <td>Specifies whether the ULPI operates at double or single data rate. This
++ parameter is only applicable if phy_type is ULPI.
++ - 0: single data rate ULPI interface with 8 bit wide data bus (default)
++ - 1: double data rate ULPI interface with 4 bit wide data bus
++ </td></tr>
++
++ <tr>
++ <td>i2c_enable</td>
++ <td>Specifies whether to use the I2C interface for full speed PHY. This
++ parameter is only applicable if PHY_TYPE is FS.
++ - 0: Disabled (default)
++ - 1: Enabled
++ </td></tr>
++
++ <tr>
++ <td>otg_en_multiple_tx_fifo</td>
++ <td>Specifies whether dedicatedto tx fifos are enabled for non periodic IN EPs.
++ The driver will automatically detect the value for this parameter if none is
++ specified.
++ - 0: Disabled
++ - 1: Enabled (default, if available)
++ </td></tr>
++
++ <tr>
++ <td>dev_tx_fifo_size_n (n = 1 to 15)</td>
++ <td>Number of 4-byte words in each of the Tx FIFOs in device mode
++ when dynamic FIFO sizing is enabled.
++ - Values: 4 to 768 (default 256)
++ </td></tr>
++
++*/
+diff --git a/drivers/usb/dwc_otg/dwc_otg_driver.h b/drivers/usb/dwc_otg/dwc_otg_driver.h
+new file mode 100644
+index 0000000..fd7f0a4
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_driver.h
+@@ -0,0 +1,83 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_driver.h $
++ * $Revision: 1.2 $
++ * $Date: 2008-11-21 05:39:15 $
++ * $Change: 1064918 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#ifndef __DWC_OTG_DRIVER_H__
++#define __DWC_OTG_DRIVER_H__
++
++/** @file
++ * This file contains the interface to the Linux driver.
++ */
++#include "dwc_otg_cil.h"
++
++/* Type declarations */
++struct dwc_otg_pcd;
++struct dwc_otg_hcd;
++
++/**
++ * This structure is a wrapper that encapsulates the driver components used to
++ * manage a single DWC_otg controller.
++ */
++typedef struct dwc_otg_device {
++ /** Base address returned from ioremap() */
++ void *base;
++
++ struct device *parent;
++
++ /** Pointer to the core interface structure. */
++ dwc_otg_core_if_t *core_if;
++
++ /** Register offset for Diagnostic API. */
++ uint32_t reg_offset;
++
++ /** Pointer to the PCD structure. */
++ struct dwc_otg_pcd *pcd;
++
++ /** Pointer to the HCD structure. */
++ struct dwc_otg_hcd *hcd;
++
++ /** Flag to indicate whether the common IRQ handler is installed. */
++ uint8_t common_irq_installed;
++
++ /* Interrupt request number. */
++ unsigned int irq;
++
++ /* Physical address of Control and Status registers, used by
++ * release_mem_region().
++ */
++ resource_size_t phys_addr;
++
++ /* Length of memory region, used by release_mem_region(). */
++ unsigned long base_len;
++} dwc_otg_device_t;
++
++#endif
+diff --git a/drivers/usb/dwc_otg/dwc_otg_hcd.c b/drivers/usb/dwc_otg/dwc_otg_hcd.c
+new file mode 100644
+index 0000000..fe643b6
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_hcd.c
+@@ -0,0 +1,2852 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd.c $
++ * $Revision: 1.4 $
++ * $Date: 2008-11-21 05:39:15 $
++ * $Change: 1064940 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_DEVICE_ONLY
++
++/**
++ * @file
++ *
++ * This file contains the implementation of the HCD. In Linux, the HCD
++ * implements the hc_driver API.
++ */
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/errno.h>
++#include <linux/list.h>
++#include <linux/interrupt.h>
++#include <linux/string.h>
++#include <linux/dma-mapping.h>
++#include <linux/version.h>
++
++#include "dwc_otg_driver.h"
++#include "dwc_otg_hcd.h"
++#include "dwc_otg_regs.h"
++
++static const char dwc_otg_hcd_name[] = "dwc_otg";
++
++static const struct hc_driver dwc_otg_hc_driver = {
++
++ .description = dwc_otg_hcd_name,
++ .product_desc = "DWC OTG Controller",
++ .hcd_priv_size = sizeof(dwc_otg_hcd_t),
++
++ .irq = dwc_otg_hcd_irq,
++
++ .flags = HCD_MEMORY | HCD_USB2,
++
++ //.reset =
++ .start = dwc_otg_hcd_start,
++ //.suspend =
++ //.resume =
++ .stop = dwc_otg_hcd_stop,
++
++ .urb_enqueue = dwc_otg_hcd_urb_enqueue,
++ .urb_dequeue = dwc_otg_hcd_urb_dequeue,
++ .endpoint_disable = dwc_otg_hcd_endpoint_disable,
++
++ .get_frame_number = dwc_otg_hcd_get_frame_number,
++
++ .hub_status_data = dwc_otg_hcd_hub_status_data,
++ .hub_control = dwc_otg_hcd_hub_control,
++ //.hub_suspend =
++ //.hub_resume =
++};
++
++/**
++ * Work queue function for starting the HCD when A-Cable is connected.
++ * The dwc_otg_hcd_start() must be called in a process context.
++ */
++static void hcd_start_func(
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++ void *_vp
++#else
++ struct work_struct *_work
++#endif
++ )
++{
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++ struct usb_hcd *usb_hcd = (struct usb_hcd *)_vp;
++#else
++ struct delayed_work *dw = container_of(_work, struct delayed_work, work);
++ struct dwc_otg_hcd *otg_hcd = container_of(dw, struct dwc_otg_hcd, start_work);
++ struct usb_hcd *usb_hcd = container_of((void *)otg_hcd, struct usb_hcd, hcd_priv);
++#endif
++ DWC_DEBUGPL(DBG_HCDV, "%s() %p\n", __func__, usb_hcd);
++ if (usb_hcd) {
++ dwc_otg_hcd_start(usb_hcd);
++ }
++}
++
++/**
++ * HCD Callback function for starting the HCD when A-Cable is
++ * connected.
++ *
++ * @param p void pointer to the <code>struct usb_hcd</code>
++ */
++static int32_t dwc_otg_hcd_start_cb(void *p)
++{
++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(p);
++ dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
++ hprt0_data_t hprt0;
++
++ if (core_if->op_state == B_HOST) {
++ /*
++ * Reset the port. During a HNP mode switch the reset
++ * needs to occur within 1ms and have a duration of at
++ * least 50ms.
++ */
++ hprt0.d32 = dwc_otg_read_hprt0(core_if);
++ hprt0.b.prtrst = 1;
++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++ ((struct usb_hcd *)p)->self.is_b_host = 1;
++ } else {
++ ((struct usb_hcd *)p)->self.is_b_host = 0;
++ }
++
++ /* Need to start the HCD in a non-interrupt context. */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++ INIT_WORK(&dwc_otg_hcd->start_work, hcd_start_func, p);
++// INIT_DELAYED_WORK(&dwc_otg_hcd->start_work, hcd_start_func, p);
++#else
++// INIT_WORK(&dwc_otg_hcd->start_work, hcd_start_func);
++ INIT_DELAYED_WORK(&dwc_otg_hcd->start_work, hcd_start_func);
++#endif
++// schedule_work(&dwc_otg_hcd->start_work);
++ queue_delayed_work(core_if->wq_otg, &dwc_otg_hcd->start_work, 50 * HZ / 1000);
++
++ return 1;
++}
++
++/**
++ * HCD Callback function for stopping the HCD.
++ *
++ * @param p void pointer to the <code>struct usb_hcd</code>
++ */
++static int32_t dwc_otg_hcd_stop_cb(void *p)
++{
++ struct usb_hcd *usb_hcd = (struct usb_hcd *)p;
++ DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p);
++ dwc_otg_hcd_stop(usb_hcd);
++ return 1;
++}
++
++static void del_xfer_timers(dwc_otg_hcd_t *hcd)
++{
++#ifdef DEBUG
++ int i;
++ int num_channels = hcd->core_if->core_params->host_channels;
++ for (i = 0; i < num_channels; i++) {
++ del_timer(&hcd->core_if->hc_xfer_timer[i]);
++ }
++#endif
++}
++
++static void del_timers(dwc_otg_hcd_t *hcd)
++{
++ del_xfer_timers(hcd);
++ del_timer(&hcd->conn_timer);
++}
++
++/**
++ * Processes all the URBs in a single list of QHs. Completes them with
++ * -ETIMEDOUT and frees the QTD.
++ */
++static void kill_urbs_in_qh_list(dwc_otg_hcd_t *hcd, struct list_head *qh_list)
++{
++ struct list_head *qh_item;
++ dwc_otg_qh_t *qh;
++ struct list_head *qtd_item;
++ dwc_otg_qtd_t *qtd;
++
++ list_for_each(qh_item, qh_list) {
++ qh = list_entry(qh_item, dwc_otg_qh_t, qh_list_entry);
++ for (qtd_item = qh->qtd_list.next;
++ qtd_item != &qh->qtd_list;
++ qtd_item = qh->qtd_list.next) {
++ qtd = list_entry(qtd_item, dwc_otg_qtd_t, qtd_list_entry);
++ if (qtd->urb != NULL) {
++ dwc_otg_hcd_complete_urb(hcd, qtd->urb,
++ -ETIMEDOUT);
++ }
++ dwc_otg_hcd_qtd_remove_and_free(hcd, qtd);
++ }
++ }
++}
++
++/**
++ * Responds with an error status of ETIMEDOUT to all URBs in the non-periodic
++ * and periodic schedules. The QTD associated with each URB is removed from
++ * the schedule and freed. This function may be called when a disconnect is
++ * detected or when the HCD is being stopped.
++ */
++static void kill_all_urbs(dwc_otg_hcd_t *hcd)
++{
++ kill_urbs_in_qh_list(hcd, &hcd->non_periodic_sched_inactive);
++ kill_urbs_in_qh_list(hcd, &hcd->non_periodic_sched_active);
++ kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_inactive);
++ kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_ready);
++ kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_assigned);
++ kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_queued);
++}
++
++/**
++ * HCD Callback function for disconnect of the HCD.
++ *
++ * @param p void pointer to the <code>struct usb_hcd</code>
++ */
++static int32_t dwc_otg_hcd_disconnect_cb(void *p)
++{
++ gintsts_data_t intr;
++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(p);
++
++ //DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p);
++
++ /*
++ * Set status flags for the hub driver.
++ */
++ dwc_otg_hcd->flags.b.port_connect_status_change = 1;
++ dwc_otg_hcd->flags.b.port_connect_status = 0;
++
++ /*
++ * Shutdown any transfers in process by clearing the Tx FIFO Empty
++ * interrupt mask and status bits and disabling subsequent host
++ * channel interrupts.
++ */
++ intr.d32 = 0;
++ intr.b.nptxfempty = 1;
++ intr.b.ptxfempty = 1;
++ intr.b.hcintr = 1;
++ dwc_modify_reg32(&dwc_otg_hcd->core_if->core_global_regs->gintmsk, intr.d32, 0);
++ dwc_modify_reg32(&dwc_otg_hcd->core_if->core_global_regs->gintsts, intr.d32, 0);
++
++ del_timers(dwc_otg_hcd);
++
++ /*
++ * Turn off the vbus power only if the core has transitioned to device
++ * mode. If still in host mode, need to keep power on to detect a
++ * reconnection.
++ */
++ if (dwc_otg_is_device_mode(dwc_otg_hcd->core_if)) {
++ if (dwc_otg_hcd->core_if->op_state != A_SUSPEND) {
++ hprt0_data_t hprt0 = { .d32=0 };
++ DWC_PRINT("Disconnect: PortPower off\n");
++ hprt0.b.prtpwr = 0;
++ dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0.d32);
++ }
++
++ dwc_otg_disable_host_interrupts(dwc_otg_hcd->core_if);
++ }
++
++ /* Respond with an error status to all URBs in the schedule. */
++ kill_all_urbs(dwc_otg_hcd);
++
++ if (dwc_otg_is_host_mode(dwc_otg_hcd->core_if)) {
++ /* Clean up any host channels that were in use. */
++ int num_channels;
++ int i;
++ dwc_hc_t *channel;
++ dwc_otg_hc_regs_t *hc_regs;
++ hcchar_data_t hcchar;
++
++ num_channels = dwc_otg_hcd->core_if->core_params->host_channels;
++
++ if (!dwc_otg_hcd->core_if->dma_enable) {
++ /* Flush out any channel requests in slave mode. */
++ for (i = 0; i < num_channels; i++) {
++ channel = dwc_otg_hcd->hc_ptr_array[i];
++ if (list_empty(&channel->hc_list_entry)) {
++ hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[i];
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ if (hcchar.b.chen) {
++ hcchar.b.chen = 0;
++ hcchar.b.chdis = 1;
++ hcchar.b.epdir = 0;
++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++ }
++ }
++ }
++ }
++
++ for (i = 0; i < num_channels; i++) {
++ channel = dwc_otg_hcd->hc_ptr_array[i];
++ if (list_empty(&channel->hc_list_entry)) {
++ hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[i];
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ if (hcchar.b.chen) {
++ /* Halt the channel. */
++ hcchar.b.chdis = 1;
++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++ }
++
++ dwc_otg_hc_cleanup(dwc_otg_hcd->core_if, channel);
++ list_add_tail(&channel->hc_list_entry,
++ &dwc_otg_hcd->free_hc_list);
++ }
++ }
++ }
++
++ /* A disconnect will end the session so the B-Device is no
++ * longer a B-host. */
++ ((struct usb_hcd *)p)->self.is_b_host = 0;
++ return 1;
++}
++
++/**
++ * Connection timeout function. An OTG host is required to display a
++ * message if the device does not connect within 10 seconds.
++ */
++void dwc_otg_hcd_connect_timeout(unsigned long ptr)
++{
++ DWC_DEBUGPL(DBG_HCDV, "%s(%x)\n", __func__, (int)ptr);
++ DWC_PRINT("Connect Timeout\n");
++ DWC_ERROR("Device Not Connected/Responding\n");
++}
++
++/**
++ * Start the connection timer. An OTG host is required to display a
++ * message if the device does not connect within 10 seconds. The
++ * timer is deleted if a port connect interrupt occurs before the
++ * timer expires.
++ */
++static void dwc_otg_hcd_start_connect_timer(dwc_otg_hcd_t *hcd)
++{
++ init_timer(&hcd->conn_timer);
++ hcd->conn_timer.function = dwc_otg_hcd_connect_timeout;
++ hcd->conn_timer.data = 0;
++ hcd->conn_timer.expires = jiffies + (HZ * 10);
++ add_timer(&hcd->conn_timer);
++}
++
++/**
++ * HCD Callback function for disconnect of the HCD.
++ *
++ * @param p void pointer to the <code>struct usb_hcd</code>
++ */
++static int32_t dwc_otg_hcd_session_start_cb(void *p)
++{
++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(p);
++ DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p);
++ dwc_otg_hcd_start_connect_timer(dwc_otg_hcd);
++ return 1;
++}
++
++/**
++ * HCD Callback structure for handling mode switching.
++ */
++static dwc_otg_cil_callbacks_t hcd_cil_callbacks = {
++ .start = dwc_otg_hcd_start_cb,
++ .stop = dwc_otg_hcd_stop_cb,
++ .disconnect = dwc_otg_hcd_disconnect_cb,
++ .session_start = dwc_otg_hcd_session_start_cb,
++ .p = 0,
++};
++
++/**
++ * Reset tasklet function
++ */
++static void reset_tasklet_func(unsigned long data)
++{
++ dwc_otg_hcd_t *dwc_otg_hcd = (dwc_otg_hcd_t *)data;
++ dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
++ hprt0_data_t hprt0;
++
++ DWC_DEBUGPL(DBG_HCDV, "USB RESET tasklet called\n");
++
++ hprt0.d32 = dwc_otg_read_hprt0(core_if);
++ hprt0.b.prtrst = 1;
++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++ mdelay(60);
++
++ hprt0.b.prtrst = 0;
++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++ dwc_otg_hcd->flags.b.port_reset_change = 1;
++}
++
++static struct tasklet_struct reset_tasklet = {
++ .next = NULL,
++ .state = 0,
++ .count = ATOMIC_INIT(0),
++ .func = reset_tasklet_func,
++ .data = 0,
++};
++
++/**
++ * Initializes the HCD. This function allocates memory for and initializes the
++ * static parts of the usb_hcd and dwc_otg_hcd structures. It also registers the
++ * USB bus with the core and calls the hc_driver->start() function. It returns
++ * a negative error on failure.
++ */
++int dwc_otg_hcd_init(struct device *dev)
++{
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(dev);
++ struct usb_hcd *hcd = NULL;
++ dwc_otg_hcd_t *dwc_otg_hcd = NULL;
++
++ int num_channels;
++ int i;
++ dwc_hc_t *channel;
++
++ int retval = 0;
++
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD INIT\n");
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ /* 2.6.20+ requires dev.dma_mask to be set prior to calling usb_create_hcd() */
++
++ /* Set device flags indicating whether the HCD supports DMA. */
++ if (otg_dev->core_if->dma_enable) {
++ DWC_PRINT("Using DMA mode\n");
++ dev->dma_mask = (void *)~0;
++ dev->coherent_dma_mask = ~0;
++
++ if (otg_dev->core_if->dma_desc_enable) {
++ DWC_PRINT("Device using Descriptor DMA mode\n");
++ } else {
++ DWC_PRINT("Device using Buffer DMA mode\n");
++ }
++ } else {
++ DWC_PRINT("Using Slave mode\n");
++ dev->dma_mask = (void *)0;
++ dev->coherent_dma_mask = 0;
++ }
++#endif
++ /*
++ * Allocate memory for the base HCD plus the DWC OTG HCD.
++ * Initialize the base HCD.
++ */
++ hcd = usb_create_hcd(&dwc_otg_hc_driver, dev, dev_name(dev));
++ if (!hcd) {
++ retval = -ENOMEM;
++ goto error1;
++ }
++
++ dev_set_drvdata(dev, otg_dev);
++ hcd->regs = otg_dev->base;
++ hcd->rsrc_start = otg_dev->phys_addr;
++ hcd->rsrc_len = otg_dev->base_len;
++ hcd->self.otg_port = 1;
++ hcd->has_tt = 1;
++
++ /* Initialize the DWC OTG HCD. */
++ dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++ dwc_otg_hcd->core_if = otg_dev->core_if;
++ otg_dev->hcd = dwc_otg_hcd;
++
++ /* */
++ spin_lock_init(&dwc_otg_hcd->lock);
++
++ /* Register the HCD CIL Callbacks */
++ dwc_otg_cil_register_hcd_callbacks(otg_dev->core_if,
++ &hcd_cil_callbacks, hcd);
++
++ /* Initialize the non-periodic schedule. */
++ INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_inactive);
++ INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_active);
++
++ /* Initialize the periodic schedule. */
++ INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_inactive);
++ INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_ready);
++ INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_assigned);
++ INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_queued);
++
++ /*
++ * Create a host channel descriptor for each host channel implemented
++ * in the controller. Initialize the channel descriptor array.
++ */
++ INIT_LIST_HEAD(&dwc_otg_hcd->free_hc_list);
++ num_channels = dwc_otg_hcd->core_if->core_params->host_channels;
++ memset(dwc_otg_hcd->hc_ptr_array, 0, sizeof(dwc_otg_hcd->hc_ptr_array));
++ for (i = 0; i < num_channels; i++) {
++ channel = kmalloc(sizeof(dwc_hc_t), GFP_KERNEL);
++ if (channel == NULL) {
++ retval = -ENOMEM;
++ DWC_ERROR("%s: host channel allocation failed\n", __func__);
++ goto error2;
++ }
++ memset(channel, 0, sizeof(dwc_hc_t));
++ channel->hc_num = i;
++ dwc_otg_hcd->hc_ptr_array[i] = channel;
++#ifdef DEBUG
++ init_timer(&dwc_otg_hcd->core_if->hc_xfer_timer[i]);
++#endif
++ DWC_DEBUGPL(DBG_HCDV, "HCD Added channel #%d, hc=%p\n", i, channel);
++ }
++
++ /* Initialize the Connection timeout timer. */
++ init_timer(&dwc_otg_hcd->conn_timer);
++
++ /* Initialize reset tasklet. */
++ reset_tasklet.data = (unsigned long) dwc_otg_hcd;
++ dwc_otg_hcd->reset_tasklet = &reset_tasklet;
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++ /* Set device flags indicating whether the HCD supports DMA. */
++ if (otg_dev->core_if->dma_enable) {
++ DWC_PRINT("Using DMA mode\n");
++ dev->dma_mask = (void *)~0;
++ dev->coherent_dma_mask = ~0;
++
++ if (otg_dev->core_if->dma_desc_enable){
++ DWC_PRINT("Device using Descriptor DMA mode\n");
++ } else {
++ DWC_PRINT("Device using Buffer DMA mode\n");
++ }
++ } else {
++ DWC_PRINT("Using Slave mode\n");
++ dev->dma_mask = (void *)0;
++ dev->dev.coherent_dma_mask = 0;
++ }
++#endif
++ /*
++ * Finish generic HCD initialization and start the HCD. This function
++ * allocates the DMA buffer pool, registers the USB bus, requests the
++ * IRQ line, and calls dwc_otg_hcd_start method.
++ */
++ retval = usb_add_hcd(hcd, otg_dev->irq, IRQF_SHARED);
++ if (retval < 0) {
++ goto error2;
++ }
++
++ /*
++ * Allocate space for storing data on status transactions. Normally no
++ * data is sent, but this space acts as a bit bucket. This must be
++ * done after usb_add_hcd since that function allocates the DMA buffer
++ * pool.
++ */
++ if (otg_dev->core_if->dma_enable) {
++ dwc_otg_hcd->status_buf =
++ dma_alloc_coherent(dev,
++ DWC_OTG_HCD_STATUS_BUF_SIZE,
++ &dwc_otg_hcd->status_buf_dma,
++ GFP_KERNEL | GFP_DMA);
++ } else {
++ dwc_otg_hcd->status_buf = kmalloc(DWC_OTG_HCD_STATUS_BUF_SIZE,
++ GFP_KERNEL);
++ }
++ if (!dwc_otg_hcd->status_buf) {
++ retval = -ENOMEM;
++ DWC_ERROR("%s: status_buf allocation failed\n", __func__);
++ goto error3;
++ }
++
++ dwc_otg_hcd->otg_dev = otg_dev;
++
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Initialized HCD, bus=%s, usbbus=%d\n",
++ dev_name(dev), hcd->self.busnum);
++
++ return 0;
++
++ /* Error conditions */
++ error3:
++ usb_remove_hcd(hcd);
++ error2:
++ dwc_otg_hcd_free(hcd);
++ usb_put_hcd(hcd);
++
++ /* FIXME: 2008/05/03 by Steven
++ * write back to device:
++ * dwc_otg_hcd has already been released by dwc_otg_hcd_free()
++ */
++ dev_set_drvdata(dev, otg_dev);
++
++ error1:
++ return retval;
++}
++
++/**
++ * Removes the HCD.
++ * Frees memory and resources associated with the HCD and deregisters the bus.
++ */
++void dwc_otg_hcd_remove(struct device *dev)
++{
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(dev);
++ dwc_otg_hcd_t *dwc_otg_hcd;
++ struct usb_hcd *hcd;
++
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD REMOVE\n");
++
++ if (!otg_dev) {
++ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev NULL!\n", __func__);
++ return;
++ }
++
++ dwc_otg_hcd = otg_dev->hcd;
++
++ if (!dwc_otg_hcd) {
++ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->hcd NULL!\n", __func__);
++ return;
++ }
++
++ hcd = dwc_otg_hcd_to_hcd(dwc_otg_hcd);
++
++ if (!hcd) {
++ DWC_DEBUGPL(DBG_ANY, "%s: dwc_otg_hcd_to_hcd(dwc_otg_hcd) NULL!\n", __func__);
++ return;
++ }
++
++ /* Turn off all interrupts */
++ dwc_write_reg32(&dwc_otg_hcd->core_if->core_global_regs->gintmsk, 0);
++ dwc_modify_reg32(&dwc_otg_hcd->core_if->core_global_regs->gahbcfg, 1, 0);
++
++ usb_remove_hcd(hcd);
++ dwc_otg_hcd_free(hcd);
++ usb_put_hcd(hcd);
++}
++
++/* =========================================================================
++ * Linux HC Driver Functions
++ * ========================================================================= */
++
++/**
++ * Initializes dynamic portions of the DWC_otg HCD state.
++ */
++static void hcd_reinit(dwc_otg_hcd_t *hcd)
++{
++ struct list_head *item;
++ int num_channels;
++ int i;
++ dwc_hc_t *channel;
++
++ hcd->flags.d32 = 0;
++
++ hcd->non_periodic_qh_ptr = &hcd->non_periodic_sched_active;
++ hcd->non_periodic_channels = 0;
++ hcd->periodic_channels = 0;
++
++ /*
++ * Put all channels in the free channel list and clean up channel
++ * states.
++ */
++ item = hcd->free_hc_list.next;
++ while (item != &hcd->free_hc_list) {
++ list_del(item);
++ item = hcd->free_hc_list.next;
++ }
++ num_channels = hcd->core_if->core_params->host_channels;
++ for (i = 0; i < num_channels; i++) {
++ channel = hcd->hc_ptr_array[i];
++ list_add_tail(&channel->hc_list_entry, &hcd->free_hc_list);
++ dwc_otg_hc_cleanup(hcd->core_if, channel);
++ }
++
++ /* Initialize the DWC core for host mode operation. */
++ dwc_otg_core_host_init(hcd->core_if);
++}
++
++/** Initializes the DWC_otg controller and its root hub and prepares it for host
++ * mode operation. Activates the root port. Returns 0 on success and a negative
++ * error code on failure. */
++int dwc_otg_hcd_start(struct usb_hcd *hcd)
++{
++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++ dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
++ struct usb_bus *bus;
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++ struct usb_device *udev;
++ int retval;
++#endif
++
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD START\n");
++
++ bus = hcd_to_bus(hcd);
++
++ /* Initialize the bus state. If the core is in Device Mode
++ * HALT the USB bus and return. */
++ if (dwc_otg_is_device_mode(core_if)) {
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++ hcd->state = HC_STATE_HALT;
++#else
++ hcd->state = HC_STATE_RUNNING;
++#endif
++ return 0;
++ }
++ hcd->state = HC_STATE_RUNNING;
++
++ /* Initialize and connect root hub if one is not already attached */
++ if (bus->root_hub) {
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Has Root Hub\n");
++ /* Inform the HUB driver to resume. */
++ usb_hcd_resume_root_hub(hcd);
++ }
++ else {
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Does Not Have Root Hub\n");
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++ udev = usb_alloc_dev(NULL, bus, 0);
++ udev->speed = USB_SPEED_HIGH;
++ if (!udev) {
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Error udev alloc\n");
++ return -ENODEV;
++ }
++ if ((retval = usb_hcd_register_root_hub(udev, hcd)) != 0) {
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Error registering %d\n", retval);
++ return -ENODEV;
++ }
++#endif
++ }
++
++ hcd_reinit(dwc_otg_hcd);
++
++ return 0;
++}
++
++static void qh_list_free(dwc_otg_hcd_t *hcd, struct list_head *qh_list)
++{
++ struct list_head *item;
++ dwc_otg_qh_t *qh;
++
++ if (!qh_list->next) {
++ /* The list hasn't been initialized yet. */
++ return;
++ }
++
++ /* Ensure there are no QTDs or URBs left. */
++ kill_urbs_in_qh_list(hcd, qh_list);
++
++ for (item = qh_list->next; item != qh_list; item = qh_list->next) {
++ qh = list_entry(item, dwc_otg_qh_t, qh_list_entry);
++ dwc_otg_hcd_qh_remove_and_free(hcd, qh);
++ }
++}
++
++/**
++ * Halts the DWC_otg host mode operations in a clean manner. USB transfers are
++ * stopped.
++ */
++void dwc_otg_hcd_stop(struct usb_hcd *hcd)
++{
++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++ hprt0_data_t hprt0 = { .d32=0 };
++
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD STOP\n");
++
++ /* Turn off all host-specific interrupts. */
++ dwc_otg_disable_host_interrupts(dwc_otg_hcd->core_if);
++
++ /*
++ * The root hub should be disconnected before this function is called.
++ * The disconnect will clear the QTD lists (via ..._hcd_urb_dequeue)
++ * and the QH lists (via ..._hcd_endpoint_disable).
++ */
++
++ /* Turn off the vbus power */
++ DWC_PRINT("PortPower off\n");
++ hprt0.b.prtpwr = 0;
++ dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0.d32);
++}
++
++/** Returns the current frame number. */
++int dwc_otg_hcd_get_frame_number(struct usb_hcd *hcd)
++{
++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++ hfnum_data_t hfnum;
++
++ hfnum.d32 = dwc_read_reg32(&dwc_otg_hcd->core_if->
++ host_if->host_global_regs->hfnum);
++
++#ifdef DEBUG_SOF
++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD GET FRAME NUMBER %d\n", hfnum.b.frnum);
++#endif
++ return hfnum.b.frnum;
++}
++
++/**
++ * Frees secondary storage associated with the dwc_otg_hcd structure contained
++ * in the struct usb_hcd field.
++ */
++void dwc_otg_hcd_free(struct usb_hcd *hcd)
++{
++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++ int i;
++
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD FREE\n");
++
++ del_timers(dwc_otg_hcd);
++
++ /* Free memory for QH/QTD lists */
++ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_inactive);
++ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_active);
++ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_inactive);
++ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_ready);
++ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_assigned);
++ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_queued);
++
++ /* Free memory for the host channels. */
++ for (i = 0; i < MAX_EPS_CHANNELS; i++) {
++ dwc_hc_t *hc = dwc_otg_hcd->hc_ptr_array[i];
++ if (hc != NULL) {
++ DWC_DEBUGPL(DBG_HCDV, "HCD Free channel #%i, hc=%p\n", i, hc);
++ kfree(hc);
++ }
++ }
++
++ if (dwc_otg_hcd->core_if->dma_enable) {
++ if (dwc_otg_hcd->status_buf_dma) {
++ dma_free_coherent(hcd->self.controller,
++ DWC_OTG_HCD_STATUS_BUF_SIZE,
++ dwc_otg_hcd->status_buf,
++ dwc_otg_hcd->status_buf_dma);
++ }
++ } else if (dwc_otg_hcd->status_buf != NULL) {
++ kfree(dwc_otg_hcd->status_buf);
++ }
++}
++
++#ifdef DEBUG
++static void dump_urb_info(struct urb *urb, char* fn_name)
++{
++ DWC_PRINT("%s, urb %p\n", fn_name, urb);
++ DWC_PRINT(" Device address: %d\n", usb_pipedevice(urb->pipe));
++ DWC_PRINT(" Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe),
++ (usb_pipein(urb->pipe) ? "IN" : "OUT"));
++ DWC_PRINT(" Endpoint type: %s\n",
++ ({char *pipetype;
++ switch (usb_pipetype(urb->pipe)) {
++ case PIPE_CONTROL: pipetype = "CONTROL"; break;
++ case PIPE_BULK: pipetype = "BULK"; break;
++ case PIPE_INTERRUPT: pipetype = "INTERRUPT"; break;
++ case PIPE_ISOCHRONOUS: pipetype = "ISOCHRONOUS"; break;
++ default: pipetype = "UNKNOWN"; break;
++ }; pipetype;}));
++ DWC_PRINT(" Speed: %s\n",
++ ({char *speed;
++ switch (urb->dev->speed) {
++ case USB_SPEED_HIGH: speed = "HIGH"; break;
++ case USB_SPEED_FULL: speed = "FULL"; break;
++ case USB_SPEED_LOW: speed = "LOW"; break;
++ default: speed = "UNKNOWN"; break;
++ }; speed;}));
++ DWC_PRINT(" Max packet size: %d\n",
++ usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
++ DWC_PRINT(" Data buffer length: %d\n", urb->transfer_buffer_length);
++ DWC_PRINT(" Transfer buffer: %p, Transfer DMA: %p\n",
++ urb->transfer_buffer, (void *)urb->transfer_dma);
++ DWC_PRINT(" Setup buffer: %p, Setup DMA: %p\n",
++ urb->setup_packet, (void *)urb->setup_dma);
++ DWC_PRINT(" Interval: %d\n", urb->interval);
++ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
++ int i;
++ for (i = 0; i < urb->number_of_packets; i++) {
++ DWC_PRINT(" ISO Desc %d:\n", i);
++ DWC_PRINT(" offset: %d, length %d\n",
++ urb->iso_frame_desc[i].offset,
++ urb->iso_frame_desc[i].length);
++ }
++ }
++}
++
++static void dump_channel_info(dwc_otg_hcd_t *hcd,
++ dwc_otg_qh_t *qh)
++{
++ if (qh->channel != NULL) {
++ dwc_hc_t *hc = qh->channel;
++ struct list_head *item;
++ dwc_otg_qh_t *qh_item;
++ int num_channels = hcd->core_if->core_params->host_channels;
++ int i;
++
++ dwc_otg_hc_regs_t *hc_regs;
++ hcchar_data_t hcchar;
++ hcsplt_data_t hcsplt;
++ hctsiz_data_t hctsiz;
++ uint32_t hcdma;
++
++ hc_regs = hcd->core_if->host_if->hc_regs[hc->hc_num];
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ hcsplt.d32 = dwc_read_reg32(&hc_regs->hcsplt);
++ hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
++ hcdma = dwc_read_reg32(&hc_regs->hcdma);
++
++ DWC_PRINT(" Assigned to channel %p:\n", hc);
++ DWC_PRINT(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32);
++ DWC_PRINT(" hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma);
++ DWC_PRINT(" dev_addr: %d, ep_num: %d, ep_is_in: %d\n",
++ hc->dev_addr, hc->ep_num, hc->ep_is_in);
++ DWC_PRINT(" ep_type: %d\n", hc->ep_type);
++ DWC_PRINT(" max_packet: %d\n", hc->max_packet);
++ DWC_PRINT(" data_pid_start: %d\n", hc->data_pid_start);
++ DWC_PRINT(" xfer_started: %d\n", hc->xfer_started);
++ DWC_PRINT(" halt_status: %d\n", hc->halt_status);
++ DWC_PRINT(" xfer_buff: %p\n", hc->xfer_buff);
++ DWC_PRINT(" xfer_len: %d\n", hc->xfer_len);
++ DWC_PRINT(" qh: %p\n", hc->qh);
++ DWC_PRINT(" NP inactive sched:\n");
++ list_for_each(item, &hcd->non_periodic_sched_inactive) {
++ qh_item = list_entry(item, dwc_otg_qh_t, qh_list_entry);
++ DWC_PRINT(" %p\n", qh_item);
++ }
++ DWC_PRINT(" NP active sched:\n");
++ list_for_each(item, &hcd->non_periodic_sched_active) {
++ qh_item = list_entry(item, dwc_otg_qh_t, qh_list_entry);
++ DWC_PRINT(" %p\n", qh_item);
++ }
++ DWC_PRINT(" Channels: \n");
++ for (i = 0; i < num_channels; i++) {
++ dwc_hc_t *hc = hcd->hc_ptr_array[i];
++ DWC_PRINT(" %2d: %p\n", i, hc);
++ }
++ }
++}
++#endif
++
++/** Starts processing a USB transfer request specified by a USB Request Block
++ * (URB). mem_flags indicates the type of memory allocation to use while
++ * processing this URB. */
++int dwc_otg_hcd_urb_enqueue(struct usb_hcd *hcd,
++ struct urb *urb,
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++ int mem_flags
++#else
++ gfp_t mem_flags
++#endif
++ )
++{
++ int retval = 0;
++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++ dwc_otg_qtd_t *qtd;
++
++#ifdef DEBUG
++ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
++ dump_urb_info(urb, "dwc_otg_hcd_urb_enqueue");
++ }
++#endif
++ if (!dwc_otg_hcd->flags.b.port_connect_status) {
++ /* No longer connected. */
++ return -ENODEV;
++ }
++
++ qtd = dwc_otg_hcd_qtd_create(urb);
++ if (qtd == NULL) {
++ DWC_ERROR("DWC OTG HCD URB Enqueue failed creating QTD\n");
++ return -ENOMEM;
++ }
++
++ retval = dwc_otg_hcd_qtd_add(qtd, dwc_otg_hcd);
++ if (retval < 0) {
++ DWC_ERROR("DWC OTG HCD URB Enqueue failed adding QTD. "
++ "Error status %d\n", retval);
++ dwc_otg_hcd_qtd_free(qtd);
++ }
++
++ return retval;
++}
++
++/** Aborts/cancels a USB transfer request. Always returns 0 to indicate
++ * success. */
++int dwc_otg_hcd_urb_dequeue(struct usb_hcd *hcd,
++ struct urb *urb,
++ int status)
++{
++ unsigned long flags;
++ dwc_otg_hcd_t *dwc_otg_hcd;
++ dwc_otg_qtd_t *urb_qtd;
++ dwc_otg_qh_t *qh;
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ struct usb_host_endpoint *ep = dwc_urb_to_endpoint(urb);
++#endif
++
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue\n");
++
++ dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++
++ SPIN_LOCK_IRQSAVE(&dwc_otg_hcd->lock, flags);
++
++ urb_qtd = (dwc_otg_qtd_t *)urb->hcpriv;
++ qh = (dwc_otg_qh_t *)ep->hcpriv;
++
++#ifdef DEBUG
++ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
++ dump_urb_info(urb, "dwc_otg_hcd_urb_dequeue");
++ if (urb_qtd == qh->qtd_in_process) {
++ dump_channel_info(dwc_otg_hcd, qh);
++ }
++ }
++#endif
++
++ if (urb_qtd == qh->qtd_in_process) {
++ /* The QTD is in process (it has been assigned to a channel). */
++
++ if (dwc_otg_hcd->flags.b.port_connect_status) {
++ /*
++ * If still connected (i.e. in host mode), halt the
++ * channel so it can be used for other transfers. If
++ * no longer connected, the host registers can't be
++ * written to halt the channel since the core is in
++ * device mode.
++ */
++ dwc_otg_hc_halt(dwc_otg_hcd->core_if, qh->channel,
++ DWC_OTG_HC_XFER_URB_DEQUEUE);
++ }
++ }
++
++ /*
++ * Free the QTD and clean up the associated QH. Leave the QH in the
++ * schedule if it has any remaining QTDs.
++ */
++ dwc_otg_hcd_qtd_remove_and_free(dwc_otg_hcd, urb_qtd);
++ if (urb_qtd == qh->qtd_in_process) {
++ dwc_otg_hcd_qh_deactivate(dwc_otg_hcd, qh, 0);
++ qh->channel = NULL;
++ qh->qtd_in_process = NULL;
++ } else if (list_empty(&qh->qtd_list)) {
++ dwc_otg_hcd_qh_remove(dwc_otg_hcd, qh);
++ }
++
++ SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags);
++
++ urb->hcpriv = NULL;
++
++ /* Higher layer software sets URB status. */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ usb_hcd_giveback_urb(hcd, urb, status);
++#else
++ usb_hcd_giveback_urb(hcd, urb, NULL);
++#endif
++ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
++ DWC_PRINT("Called usb_hcd_giveback_urb()\n");
++ DWC_PRINT(" urb->status = %d\n", urb->status);
++ }
++
++ return 0;
++}
++
++/** Frees resources in the DWC_otg controller related to a given endpoint. Also
++ * clears state in the HCD related to the endpoint. Any URBs for the endpoint
++ * must already be dequeued. */
++void dwc_otg_hcd_endpoint_disable(struct usb_hcd *hcd,
++ struct usb_host_endpoint *ep)
++{
++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++ dwc_otg_qh_t *qh;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ unsigned long flags;
++ int retry = 0;
++#endif
++
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD EP DISABLE: _bEndpointAddress=0x%02x, "
++ "endpoint=%d\n", ep->desc.bEndpointAddress,
++ dwc_ep_addr_to_endpoint(ep->desc.bEndpointAddress));
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++rescan:
++ SPIN_LOCK_IRQSAVE(&dwc_otg_hcd->lock, flags);
++ qh = (dwc_otg_qh_t *)(ep->hcpriv);
++ if (!qh)
++ goto done;
++
++ /** Check that the QTD list is really empty */
++ if (!list_empty(&qh->qtd_list)) {
++ if (retry++ < 250) {
++ SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags);
++ schedule_timeout_uninterruptible(1);
++ goto rescan;
++ }
++
++ DWC_WARN("DWC OTG HCD EP DISABLE:"
++ " QTD List for this endpoint is not empty\n");
++ }
++
++ dwc_otg_hcd_qh_remove_and_free(dwc_otg_hcd, qh);
++ ep->hcpriv = NULL;
++done:
++ SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags);
++
++#else // LINUX_VERSION_CODE
++
++ qh = (dwc_otg_qh_t *)(ep->hcpriv);
++ if (qh != NULL) {
++#ifdef DEBUG
++ /** Check that the QTD list is really empty */
++ if (!list_empty(&qh->qtd_list)) {
++ DWC_WARN("DWC OTG HCD EP DISABLE:"
++ " QTD List for this endpoint is not empty\n");
++ }
++#endif
++ dwc_otg_hcd_qh_remove_and_free(dwc_otg_hcd, qh);
++ ep->hcpriv = NULL;
++ }
++#endif // LINUX_VERSION_CODE
++}
++
++/** Handles host mode interrupts for the DWC_otg controller. Returns IRQ_NONE if
++ * there was no interrupt to handle. Returns IRQ_HANDLED if there was a valid
++ * interrupt.
++ *
++ * This function is called by the USB core when an interrupt occurs */
++irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19)
++ , struct pt_regs *regs
++#endif
++ )
++{
++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++ return IRQ_RETVAL(dwc_otg_hcd_handle_intr(dwc_otg_hcd));
++}
++
++/** Creates Status Change bitmap for the root hub and root port. The bitmap is
++ * returned in buf. Bit 0 is the status change indicator for the root hub. Bit 1
++ * is the status change indicator for the single root port. Returns 1 if either
++ * change indicator is 1, otherwise returns 0. */
++int dwc_otg_hcd_hub_status_data(struct usb_hcd *hcd, char *buf)
++{
++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++
++ buf[0] = 0;
++ buf[0] |= (dwc_otg_hcd->flags.b.port_connect_status_change ||
++ dwc_otg_hcd->flags.b.port_reset_change ||
++ dwc_otg_hcd->flags.b.port_enable_change ||
++ dwc_otg_hcd->flags.b.port_suspend_change ||
++ dwc_otg_hcd->flags.b.port_over_current_change) << 1;
++
++#ifdef DEBUG
++ if (buf[0]) {
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB STATUS DATA:"
++ " Root port status changed\n");
++ DWC_DEBUGPL(DBG_HCDV, " port_connect_status_change: %d\n",
++ dwc_otg_hcd->flags.b.port_connect_status_change);
++ DWC_DEBUGPL(DBG_HCDV, " port_reset_change: %d\n",
++ dwc_otg_hcd->flags.b.port_reset_change);
++ DWC_DEBUGPL(DBG_HCDV, " port_enable_change: %d\n",
++ dwc_otg_hcd->flags.b.port_enable_change);
++ DWC_DEBUGPL(DBG_HCDV, " port_suspend_change: %d\n",
++ dwc_otg_hcd->flags.b.port_suspend_change);
++ DWC_DEBUGPL(DBG_HCDV, " port_over_current_change: %d\n",
++ dwc_otg_hcd->flags.b.port_over_current_change);
++ }
++#endif
++ return (buf[0] != 0);
++}
++
++#ifdef DWC_HS_ELECT_TST
++/*
++ * Quick and dirty hack to implement the HS Electrical Test
++ * SINGLE_STEP_GET_DEVICE_DESCRIPTOR feature.
++ *
++ * This code was copied from our userspace app "hset". It sends a
++ * Get Device Descriptor control sequence in two parts, first the
++ * Setup packet by itself, followed some time later by the In and
++ * Ack packets. Rather than trying to figure out how to add this
++ * functionality to the normal driver code, we just hijack the
++ * hardware, using these two function to drive the hardware
++ * directly.
++ */
++
++dwc_otg_core_global_regs_t *global_regs;
++dwc_otg_host_global_regs_t *hc_global_regs;
++dwc_otg_hc_regs_t *hc_regs;
++uint32_t *data_fifo;
++
++static void do_setup(void)
++{
++ gintsts_data_t gintsts;
++ hctsiz_data_t hctsiz;
++ hcchar_data_t hcchar;
++ haint_data_t haint;
++ hcint_data_t hcint;
++
++ /* Enable HAINTs */
++ dwc_write_reg32(&hc_global_regs->haintmsk, 0x0001);
++
++ /* Enable HCINTs */
++ dwc_write_reg32(&hc_regs->hcintmsk, 0x04a3);
++
++ /* Read GINTSTS */
++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++ /* Read HAINT */
++ haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++ /* Read HCINT */
++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++ /* Read HCCHAR */
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++ /* Clear HCINT */
++ dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++ /* Clear HAINT */
++ dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++ /* Clear GINTSTS */
++ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++ /* Read GINTSTS */
++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++ /*
++ * Send Setup packet (Get Device Descriptor)
++ */
++
++ /* Make sure channel is disabled */
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ if (hcchar.b.chen) {
++ //fprintf(stderr, "Channel already enabled 1, HCCHAR = %08x\n", hcchar.d32);
++ hcchar.b.chdis = 1;
++// hcchar.b.chen = 1;
++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++ //sleep(1);
++ mdelay(1000);
++
++ /* Read GINTSTS */
++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++ /* Read HAINT */
++ haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++ /* Read HCINT */
++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++ /* Read HCCHAR */
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++ /* Clear HCINT */
++ dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++ /* Clear HAINT */
++ dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++ /* Clear GINTSTS */
++ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ //if (hcchar.b.chen) {
++ // fprintf(stderr, "** Channel _still_ enabled 1, HCCHAR = %08x **\n", hcchar.d32);
++ //}
++ }
++
++ /* Set HCTSIZ */
++ hctsiz.d32 = 0;
++ hctsiz.b.xfersize = 8;
++ hctsiz.b.pktcnt = 1;
++ hctsiz.b.pid = DWC_OTG_HC_PID_SETUP;
++ dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
++
++ /* Set HCCHAR */
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
++ hcchar.b.epdir = 0;
++ hcchar.b.epnum = 0;
++ hcchar.b.mps = 8;
++ hcchar.b.chen = 1;
++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++
++ /* Fill FIFO with Setup data for Get Device Descriptor */
++ data_fifo = (uint32_t *)((char *)global_regs + 0x1000);
++ dwc_write_reg32(data_fifo++, 0x01000680);
++ dwc_write_reg32(data_fifo++, 0x00080000);
++
++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++ //fprintf(stderr, "Waiting for HCINTR intr 1, GINTSTS = %08x\n", gintsts.d32);
++
++ /* Wait for host channel interrupt */
++ do {
++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++ } while (gintsts.b.hcintr == 0);
++
++ //fprintf(stderr, "Got HCINTR intr 1, GINTSTS = %08x\n", gintsts.d32);
++
++ /* Disable HCINTs */
++ dwc_write_reg32(&hc_regs->hcintmsk, 0x0000);
++
++ /* Disable HAINTs */
++ dwc_write_reg32(&hc_global_regs->haintmsk, 0x0000);
++
++ /* Read HAINT */
++ haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++ /* Read HCINT */
++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++ /* Read HCCHAR */
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++ /* Clear HCINT */
++ dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++ /* Clear HAINT */
++ dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++ /* Clear GINTSTS */
++ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++ /* Read GINTSTS */
++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++}
++
++static void do_in_ack(void)
++{
++ gintsts_data_t gintsts;
++ hctsiz_data_t hctsiz;
++ hcchar_data_t hcchar;
++ haint_data_t haint;
++ hcint_data_t hcint;
++ host_grxsts_data_t grxsts;
++
++ /* Enable HAINTs */
++ dwc_write_reg32(&hc_global_regs->haintmsk, 0x0001);
++
++ /* Enable HCINTs */
++ dwc_write_reg32(&hc_regs->hcintmsk, 0x04a3);
++
++ /* Read GINTSTS */
++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++ /* Read HAINT */
++ haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++ /* Read HCINT */
++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++ /* Read HCCHAR */
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++ /* Clear HCINT */
++ dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++ /* Clear HAINT */
++ dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++ /* Clear GINTSTS */
++ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++ /* Read GINTSTS */
++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++ /*
++ * Receive Control In packet
++ */
++
++ /* Make sure channel is disabled */
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ if (hcchar.b.chen) {
++ //fprintf(stderr, "Channel already enabled 2, HCCHAR = %08x\n", hcchar.d32);
++ hcchar.b.chdis = 1;
++ hcchar.b.chen = 1;
++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++ //sleep(1);
++ mdelay(1000);
++
++ /* Read GINTSTS */
++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++ /* Read HAINT */
++ haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++ /* Read HCINT */
++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++ /* Read HCCHAR */
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++ /* Clear HCINT */
++ dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++ /* Clear HAINT */
++ dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++ /* Clear GINTSTS */
++ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ //if (hcchar.b.chen) {
++ // fprintf(stderr, "** Channel _still_ enabled 2, HCCHAR = %08x **\n", hcchar.d32);
++ //}
++ }
++
++ /* Set HCTSIZ */
++ hctsiz.d32 = 0;
++ hctsiz.b.xfersize = 8;
++ hctsiz.b.pktcnt = 1;
++ hctsiz.b.pid = DWC_OTG_HC_PID_DATA1;
++ dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
++
++ /* Set HCCHAR */
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
++ hcchar.b.epdir = 1;
++ hcchar.b.epnum = 0;
++ hcchar.b.mps = 8;
++ hcchar.b.chen = 1;
++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++
++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++ //fprintf(stderr, "Waiting for RXSTSQLVL intr 1, GINTSTS = %08x\n", gintsts.d32);
++
++ /* Wait for receive status queue interrupt */
++ do {
++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++ } while (gintsts.b.rxstsqlvl == 0);
++
++ //fprintf(stderr, "Got RXSTSQLVL intr 1, GINTSTS = %08x\n", gintsts.d32);
++
++ /* Read RXSTS */
++ grxsts.d32 = dwc_read_reg32(&global_regs->grxstsp);
++ //fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32);
++
++ /* Clear RXSTSQLVL in GINTSTS */
++ gintsts.d32 = 0;
++ gintsts.b.rxstsqlvl = 1;
++ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++ switch (grxsts.b.pktsts) {
++ case DWC_GRXSTS_PKTSTS_IN:
++ /* Read the data into the host buffer */
++ if (grxsts.b.bcnt > 0) {
++ int i;
++ int word_count = (grxsts.b.bcnt + 3) / 4;
++
++ data_fifo = (uint32_t *)((char *)global_regs + 0x1000);
++
++ for (i = 0; i < word_count; i++) {
++ (void)dwc_read_reg32(data_fifo++);
++ }
++ }
++
++ //fprintf(stderr, "Received %u bytes\n", (unsigned)grxsts.b.bcnt);
++ break;
++
++ default:
++ //fprintf(stderr, "** Unexpected GRXSTS packet status 1 **\n");
++ break;
++ }
++
++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++ //fprintf(stderr, "Waiting for RXSTSQLVL intr 2, GINTSTS = %08x\n", gintsts.d32);
++
++ /* Wait for receive status queue interrupt */
++ do {
++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++ } while (gintsts.b.rxstsqlvl == 0);
++
++ //fprintf(stderr, "Got RXSTSQLVL intr 2, GINTSTS = %08x\n", gintsts.d32);
++
++ /* Read RXSTS */
++ grxsts.d32 = dwc_read_reg32(&global_regs->grxstsp);
++ //fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32);
++
++ /* Clear RXSTSQLVL in GINTSTS */
++ gintsts.d32 = 0;
++ gintsts.b.rxstsqlvl = 1;
++ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++ switch (grxsts.b.pktsts) {
++ case DWC_GRXSTS_PKTSTS_IN_XFER_COMP:
++ break;
++
++ default:
++ //fprintf(stderr, "** Unexpected GRXSTS packet status 2 **\n");
++ break;
++ }
++
++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++ //fprintf(stderr, "Waiting for HCINTR intr 2, GINTSTS = %08x\n", gintsts.d32);
++
++ /* Wait for host channel interrupt */
++ do {
++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++ } while (gintsts.b.hcintr == 0);
++
++ //fprintf(stderr, "Got HCINTR intr 2, GINTSTS = %08x\n", gintsts.d32);
++
++ /* Read HAINT */
++ haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++ /* Read HCINT */
++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++ /* Read HCCHAR */
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++ /* Clear HCINT */
++ dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++ /* Clear HAINT */
++ dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++ /* Clear GINTSTS */
++ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++ /* Read GINTSTS */
++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++// usleep(100000);
++// mdelay(100);
++ mdelay(1);
++
++ /*
++ * Send handshake packet
++ */
++
++ /* Read HAINT */
++ haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++ /* Read HCINT */
++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++ /* Read HCCHAR */
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++ /* Clear HCINT */
++ dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++ /* Clear HAINT */
++ dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++ /* Clear GINTSTS */
++ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++ /* Read GINTSTS */
++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++ /* Make sure channel is disabled */
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ if (hcchar.b.chen) {
++ //fprintf(stderr, "Channel already enabled 3, HCCHAR = %08x\n", hcchar.d32);
++ hcchar.b.chdis = 1;
++ hcchar.b.chen = 1;
++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++ //sleep(1);
++ mdelay(1000);
++
++ /* Read GINTSTS */
++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++ /* Read HAINT */
++ haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++ /* Read HCINT */
++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++ /* Read HCCHAR */
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++ /* Clear HCINT */
++ dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++ /* Clear HAINT */
++ dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++ /* Clear GINTSTS */
++ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ //if (hcchar.b.chen) {
++ // fprintf(stderr, "** Channel _still_ enabled 3, HCCHAR = %08x **\n", hcchar.d32);
++ //}
++ }
++
++ /* Set HCTSIZ */
++ hctsiz.d32 = 0;
++ hctsiz.b.xfersize = 0;
++ hctsiz.b.pktcnt = 1;
++ hctsiz.b.pid = DWC_OTG_HC_PID_DATA1;
++ dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
++
++ /* Set HCCHAR */
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
++ hcchar.b.epdir = 0;
++ hcchar.b.epnum = 0;
++ hcchar.b.mps = 8;
++ hcchar.b.chen = 1;
++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++
++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++ //fprintf(stderr, "Waiting for HCINTR intr 3, GINTSTS = %08x\n", gintsts.d32);
++
++ /* Wait for host channel interrupt */
++ do {
++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++ } while (gintsts.b.hcintr == 0);
++
++ //fprintf(stderr, "Got HCINTR intr 3, GINTSTS = %08x\n", gintsts.d32);
++
++ /* Disable HCINTs */
++ dwc_write_reg32(&hc_regs->hcintmsk, 0x0000);
++
++ /* Disable HAINTs */
++ dwc_write_reg32(&hc_global_regs->haintmsk, 0x0000);
++
++ /* Read HAINT */
++ haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++ /* Read HCINT */
++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++ /* Read HCCHAR */
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++ /* Clear HCINT */
++ dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++ /* Clear HAINT */
++ dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++ /* Clear GINTSTS */
++ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++ /* Read GINTSTS */
++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++}
++#endif /* DWC_HS_ELECT_TST */
++
++/** Handles hub class-specific requests. */
++int dwc_otg_hcd_hub_control(struct usb_hcd *hcd,
++ u16 typeReq,
++ u16 wValue,
++ u16 wIndex,
++ char *buf,
++ u16 wLength)
++{
++ int retval = 0;
++
++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++ dwc_otg_core_if_t *core_if = hcd_to_dwc_otg_hcd(hcd)->core_if;
++ struct usb_hub_descriptor *desc;
++ hprt0_data_t hprt0 = {.d32 = 0};
++
++ uint32_t port_status;
++
++ switch (typeReq) {
++ case ClearHubFeature:
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++ "ClearHubFeature 0x%x\n", wValue);
++ switch (wValue) {
++ case C_HUB_LOCAL_POWER:
++ case C_HUB_OVER_CURRENT:
++ /* Nothing required here */
++ break;
++ default:
++ retval = -EINVAL;
++ DWC_ERROR("DWC OTG HCD - "
++ "ClearHubFeature request %xh unknown\n", wValue);
++ }
++ break;
++ case ClearPortFeature:
++ if (!wIndex || wIndex > 1)
++ goto error;
++
++ switch (wValue) {
++ case USB_PORT_FEAT_ENABLE:
++ DWC_DEBUGPL(DBG_ANY, "DWC OTG HCD HUB CONTROL - "
++ "ClearPortFeature USB_PORT_FEAT_ENABLE\n");
++ hprt0.d32 = dwc_otg_read_hprt0(core_if);
++ hprt0.b.prtena = 1;
++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++ break;
++ case USB_PORT_FEAT_SUSPEND:
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++ "ClearPortFeature USB_PORT_FEAT_SUSPEND\n");
++ hprt0.d32 = dwc_otg_read_hprt0(core_if);
++ hprt0.b.prtres = 1;
++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++ /* Clear Resume bit */
++ mdelay(100);
++ hprt0.b.prtres = 0;
++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++ break;
++ case USB_PORT_FEAT_POWER:
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++ "ClearPortFeature USB_PORT_FEAT_POWER\n");
++ hprt0.d32 = dwc_otg_read_hprt0(core_if);
++ hprt0.b.prtpwr = 0;
++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++ break;
++ case USB_PORT_FEAT_INDICATOR:
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++ "ClearPortFeature USB_PORT_FEAT_INDICATOR\n");
++ /* Port inidicator not supported */
++ break;
++ case USB_PORT_FEAT_C_CONNECTION:
++ /* Clears drivers internal connect status change
++ * flag */
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++ "ClearPortFeature USB_PORT_FEAT_C_CONNECTION\n");
++ dwc_otg_hcd->flags.b.port_connect_status_change = 0;
++ break;
++ case USB_PORT_FEAT_C_RESET:
++ /* Clears the driver's internal Port Reset Change
++ * flag */
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++ "ClearPortFeature USB_PORT_FEAT_C_RESET\n");
++ dwc_otg_hcd->flags.b.port_reset_change = 0;
++ break;
++ case USB_PORT_FEAT_C_ENABLE:
++ /* Clears the driver's internal Port
++ * Enable/Disable Change flag */
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++ "ClearPortFeature USB_PORT_FEAT_C_ENABLE\n");
++ dwc_otg_hcd->flags.b.port_enable_change = 0;
++ break;
++ case USB_PORT_FEAT_C_SUSPEND:
++ /* Clears the driver's internal Port Suspend
++ * Change flag, which is set when resume signaling on
++ * the host port is complete */
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++ "ClearPortFeature USB_PORT_FEAT_C_SUSPEND\n");
++ dwc_otg_hcd->flags.b.port_suspend_change = 0;
++ break;
++ case USB_PORT_FEAT_C_OVER_CURRENT:
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++ "ClearPortFeature USB_PORT_FEAT_C_OVER_CURRENT\n");
++ dwc_otg_hcd->flags.b.port_over_current_change = 0;
++ break;
++ default:
++ retval = -EINVAL;
++ DWC_ERROR("DWC OTG HCD - "
++ "ClearPortFeature request %xh "
++ "unknown or unsupported\n", wValue);
++ }
++ break;
++ case GetHubDescriptor:
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++ "GetHubDescriptor\n");
++ desc = (struct usb_hub_descriptor *)buf;
++ desc->bDescLength = 9;
++ desc->bDescriptorType = 0x29;
++ desc->bNbrPorts = 1;
++ desc->wHubCharacteristics = 0x08;
++ desc->bPwrOn2PwrGood = 1;
++ desc->bHubContrCurrent = 0;
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,39)
++ desc->u.hs.DeviceRemovable[0] = 0;
++ desc->u.hs.DeviceRemovable[1] = 0xff;
++#endif
++ break;
++ case GetHubStatus:
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++ "GetHubStatus\n");
++ memset(buf, 0, 4);
++ break;
++ case GetPortStatus:
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++ "GetPortStatus\n");
++
++ if (!wIndex || wIndex > 1)
++ goto error;
++
++ port_status = 0;
++
++ if (dwc_otg_hcd->flags.b.port_connect_status_change)
++ port_status |= (1 << USB_PORT_FEAT_C_CONNECTION);
++
++ if (dwc_otg_hcd->flags.b.port_enable_change)
++ port_status |= (1 << USB_PORT_FEAT_C_ENABLE);
++
++ if (dwc_otg_hcd->flags.b.port_suspend_change)
++ port_status |= (1 << USB_PORT_FEAT_C_SUSPEND);
++
++ if (dwc_otg_hcd->flags.b.port_reset_change)
++ port_status |= (1 << USB_PORT_FEAT_C_RESET);
++
++ if (dwc_otg_hcd->flags.b.port_over_current_change) {
++ DWC_ERROR("Device Not Supported\n");
++ port_status |= (1 << USB_PORT_FEAT_C_OVER_CURRENT);
++ }
++
++ if (!dwc_otg_hcd->flags.b.port_connect_status) {
++ /*
++ * The port is disconnected, which means the core is
++ * either in device mode or it soon will be. Just
++ * return 0's for the remainder of the port status
++ * since the port register can't be read if the core
++ * is in device mode.
++ */
++ *((__le32 *) buf) = cpu_to_le32(port_status);
++ break;
++ }
++
++ hprt0.d32 = dwc_read_reg32(core_if->host_if->hprt0);
++ DWC_DEBUGPL(DBG_HCDV, " HPRT0: 0x%08x\n", hprt0.d32);
++
++ if (hprt0.b.prtconnsts)
++ port_status |= (1 << USB_PORT_FEAT_CONNECTION);
++
++ if (hprt0.b.prtena)
++ port_status |= (1 << USB_PORT_FEAT_ENABLE);
++
++ if (hprt0.b.prtsusp)
++ port_status |= (1 << USB_PORT_FEAT_SUSPEND);
++
++ if (hprt0.b.prtovrcurract)
++ port_status |= (1 << USB_PORT_FEAT_OVER_CURRENT);
++
++ if (hprt0.b.prtrst)
++ port_status |= (1 << USB_PORT_FEAT_RESET);
++
++ if (hprt0.b.prtpwr)
++ port_status |= (1 << USB_PORT_FEAT_POWER);
++
++ if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED)
++ port_status |= USB_PORT_STAT_HIGH_SPEED;
++ else if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED)
++ port_status |= USB_PORT_STAT_LOW_SPEED;
++
++ if (hprt0.b.prttstctl)
++ port_status |= (1 << USB_PORT_FEAT_TEST);
++
++ /* USB_PORT_FEAT_INDICATOR unsupported always 0 */
++
++ *((__le32 *) buf) = cpu_to_le32(port_status);
++
++ break;
++ case SetHubFeature:
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++ "SetHubFeature\n");
++ /* No HUB features supported */
++ break;
++ case SetPortFeature:
++ if (wValue != USB_PORT_FEAT_TEST && (!wIndex || wIndex > 1))
++ goto error;
++
++ if (!dwc_otg_hcd->flags.b.port_connect_status) {
++ /*
++ * The port is disconnected, which means the core is
++ * either in device mode or it soon will be. Just
++ * return without doing anything since the port
++ * register can't be written if the core is in device
++ * mode.
++ */
++ break;
++ }
++
++ switch (wValue) {
++ case USB_PORT_FEAT_SUSPEND:
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++ "SetPortFeature - USB_PORT_FEAT_SUSPEND\n");
++ if (hcd->self.otg_port == wIndex &&
++ hcd->self.b_hnp_enable) {
++ gotgctl_data_t gotgctl = {.d32=0};
++ gotgctl.b.hstsethnpen = 1;
++ dwc_modify_reg32(&core_if->core_global_regs->gotgctl,
++ 0, gotgctl.d32);
++ core_if->op_state = A_SUSPEND;
++ }
++ hprt0.d32 = dwc_otg_read_hprt0(core_if);
++ hprt0.b.prtsusp = 1;
++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++ //DWC_PRINT("SUSPEND: HPRT0=%0x\n", hprt0.d32);
++ /* Suspend the Phy Clock */
++ {
++ pcgcctl_data_t pcgcctl = {.d32=0};
++ pcgcctl.b.stoppclk = 1;
++ dwc_write_reg32(core_if->pcgcctl, pcgcctl.d32);
++ }
++
++ /* For HNP the bus must be suspended for at least 200ms. */
++ if (hcd->self.b_hnp_enable) {
++ mdelay(200);
++ //DWC_PRINT("SUSPEND: wait complete! (%d)\n", _hcd->state);
++ }
++ break;
++ case USB_PORT_FEAT_POWER:
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++ "SetPortFeature - USB_PORT_FEAT_POWER\n");
++ hprt0.d32 = dwc_otg_read_hprt0(core_if);
++ hprt0.b.prtpwr = 1;
++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++ break;
++ case USB_PORT_FEAT_RESET:
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++ "SetPortFeature - USB_PORT_FEAT_RESET\n");
++ hprt0.d32 = dwc_otg_read_hprt0(core_if);
++ /* When B-Host the Port reset bit is set in
++ * the Start HCD Callback function, so that
++ * the reset is started within 1ms of the HNP
++ * success interrupt. */
++ if (!hcd->self.is_b_host) {
++ hprt0.b.prtrst = 1;
++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++ }
++ /* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */
++ MDELAY(60);
++ hprt0.b.prtrst = 0;
++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++ break;
++
++#ifdef DWC_HS_ELECT_TST
++ case USB_PORT_FEAT_TEST:
++ {
++ uint32_t t;
++ gintmsk_data_t gintmsk;
++
++ t = (wIndex >> 8); /* MSB wIndex USB */
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++ "SetPortFeature - USB_PORT_FEAT_TEST %d\n", t);
++ warn("USB_PORT_FEAT_TEST %d\n", t);
++ if (t < 6) {
++ hprt0.d32 = dwc_otg_read_hprt0(core_if);
++ hprt0.b.prttstctl = t;
++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++ } else {
++ /* Setup global vars with reg addresses (quick and
++ * dirty hack, should be cleaned up)
++ */
++ global_regs = core_if->core_global_regs;
++ hc_global_regs = core_if->host_if->host_global_regs;
++ hc_regs = (dwc_otg_hc_regs_t *)((char *)global_regs + 0x500);
++ data_fifo = (uint32_t *)((char *)global_regs + 0x1000);
++
++ if (t == 6) { /* HS_HOST_PORT_SUSPEND_RESUME */
++ /* Save current interrupt mask */
++ gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk);
++
++ /* Disable all interrupts while we muck with
++ * the hardware directly
++ */
++ dwc_write_reg32(&global_regs->gintmsk, 0);
++
++ /* 15 second delay per the test spec */
++ mdelay(15000);
++
++ /* Drive suspend on the root port */
++ hprt0.d32 = dwc_otg_read_hprt0(core_if);
++ hprt0.b.prtsusp = 1;
++ hprt0.b.prtres = 0;
++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++
++ /* 15 second delay per the test spec */
++ mdelay(15000);
++
++ /* Drive resume on the root port */
++ hprt0.d32 = dwc_otg_read_hprt0(core_if);
++ hprt0.b.prtsusp = 0;
++ hprt0.b.prtres = 1;
++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++ mdelay(100);
++
++ /* Clear the resume bit */
++ hprt0.b.prtres = 0;
++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++
++ /* Restore interrupts */
++ dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32);
++ } else if (t == 7) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup */
++ /* Save current interrupt mask */
++ gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk);
++
++ /* Disable all interrupts while we muck with
++ * the hardware directly
++ */
++ dwc_write_reg32(&global_regs->gintmsk, 0);
++
++ /* 15 second delay per the test spec */
++ mdelay(15000);
++
++ /* Send the Setup packet */
++ do_setup();
++
++ /* 15 second delay so nothing else happens for awhile */
++ mdelay(15000);
++
++ /* Restore interrupts */
++ dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32);
++ } else if (t == 8) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute */
++ /* Save current interrupt mask */
++ gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk);
++
++ /* Disable all interrupts while we muck with
++ * the hardware directly
++ */
++ dwc_write_reg32(&global_regs->gintmsk, 0);
++
++ /* Send the Setup packet */
++ do_setup();
++
++ /* 15 second delay so nothing else happens for awhile */
++ mdelay(15000);
++
++ /* Send the In and Ack packets */
++ do_in_ack();
++
++ /* 15 second delay so nothing else happens for awhile */
++ mdelay(15000);
++
++ /* Restore interrupts */
++ dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32);
++ }
++ }
++ break;
++ }
++#endif /* DWC_HS_ELECT_TST */
++
++ case USB_PORT_FEAT_INDICATOR:
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++ "SetPortFeature - USB_PORT_FEAT_INDICATOR\n");
++ /* Not supported */
++ break;
++ default:
++ retval = -EINVAL;
++ DWC_ERROR("DWC OTG HCD - "
++ "SetPortFeature request %xh "
++ "unknown or unsupported\n", wValue);
++ break;
++ }
++ break;
++ default:
++ error:
++ retval = -EINVAL;
++ DWC_WARN("DWC OTG HCD - "
++ "Unknown hub control request type or invalid typeReq: %xh wIndex: %xh wValue: %xh\n",
++ typeReq, wIndex, wValue);
++ break;
++ }
++
++ return retval;
++}
++
++/**
++ * Assigns transactions from a QTD to a free host channel and initializes the
++ * host channel to perform the transactions. The host channel is removed from
++ * the free list.
++ *
++ * @param hcd The HCD state structure.
++ * @param qh Transactions from the first QTD for this QH are selected and
++ * assigned to a free host channel.
++ */
++static void assign_and_init_hc(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
++{
++ dwc_hc_t *hc;
++ dwc_otg_qtd_t *qtd;
++ struct urb *urb;
++
++ DWC_DEBUGPL(DBG_HCDV, "%s(%p,%p)\n", __func__, hcd, qh);
++
++ hc = list_entry(hcd->free_hc_list.next, dwc_hc_t, hc_list_entry);
++
++ /* Remove the host channel from the free list. */
++ list_del_init(&hc->hc_list_entry);
++
++ qtd = list_entry(qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry);
++ urb = qtd->urb;
++ qh->channel = hc;
++ qh->qtd_in_process = qtd;
++
++ /*
++ * Use usb_pipedevice to determine device address. This address is
++ * 0 before the SET_ADDRESS command and the correct address afterward.
++ */
++ hc->dev_addr = usb_pipedevice(urb->pipe);
++ hc->ep_num = usb_pipeendpoint(urb->pipe);
++
++ if (urb->dev->speed == USB_SPEED_LOW) {
++ hc->speed = DWC_OTG_EP_SPEED_LOW;
++ } else if (urb->dev->speed == USB_SPEED_FULL) {
++ hc->speed = DWC_OTG_EP_SPEED_FULL;
++ } else {
++ hc->speed = DWC_OTG_EP_SPEED_HIGH;
++ }
++
++ hc->max_packet = dwc_max_packet(qh->maxp);
++
++ hc->xfer_started = 0;
++ hc->halt_status = DWC_OTG_HC_XFER_NO_HALT_STATUS;
++ hc->error_state = (qtd->error_count > 0);
++ hc->halt_on_queue = 0;
++ hc->halt_pending = 0;
++ hc->requests = 0;
++
++ /*
++ * The following values may be modified in the transfer type section
++ * below. The xfer_len value may be reduced when the transfer is
++ * started to accommodate the max widths of the XferSize and PktCnt
++ * fields in the HCTSIZn register.
++ */
++ hc->do_ping = qh->ping_state;
++ hc->ep_is_in = (usb_pipein(urb->pipe) != 0);
++ hc->data_pid_start = qh->data_toggle;
++ hc->multi_count = 1;
++
++ if (hcd->core_if->dma_enable) {
++ hc->xfer_buff = (uint8_t *)urb->transfer_dma + urb->actual_length;
++ } else {
++ hc->xfer_buff = (uint8_t *)urb->transfer_buffer + urb->actual_length;
++ }
++ hc->xfer_len = urb->transfer_buffer_length - urb->actual_length;
++ hc->xfer_count = 0;
++
++ /*
++ * Set the split attributes
++ */
++ hc->do_split = 0;
++ if (qh->do_split) {
++ hc->do_split = 1;
++ hc->xact_pos = qtd->isoc_split_pos;
++ hc->complete_split = qtd->complete_split;
++ hc->hub_addr = urb->dev->tt->hub->devnum;
++ hc->port_addr = urb->dev->ttport;
++ }
++
++ switch (usb_pipetype(urb->pipe)) {
++ case PIPE_CONTROL:
++ hc->ep_type = DWC_OTG_EP_TYPE_CONTROL;
++ switch (qtd->control_phase) {
++ case DWC_OTG_CONTROL_SETUP:
++ DWC_DEBUGPL(DBG_HCDV, " Control setup transaction\n");
++ hc->do_ping = 0;
++ hc->ep_is_in = 0;
++ hc->data_pid_start = DWC_OTG_HC_PID_SETUP;
++ if (hcd->core_if->dma_enable) {
++ hc->xfer_buff = (uint8_t *)urb->setup_dma;
++ } else {
++ hc->xfer_buff = (uint8_t *)urb->setup_packet;
++ }
++ hc->xfer_len = 8;
++ break;
++ case DWC_OTG_CONTROL_DATA:
++ DWC_DEBUGPL(DBG_HCDV, " Control data transaction\n");
++ hc->data_pid_start = qtd->data_toggle;
++ break;
++ case DWC_OTG_CONTROL_STATUS:
++ /*
++ * Direction is opposite of data direction or IN if no
++ * data.
++ */
++ DWC_DEBUGPL(DBG_HCDV, " Control status transaction\n");
++ if (urb->transfer_buffer_length == 0) {
++ hc->ep_is_in = 1;
++ } else {
++ hc->ep_is_in = (usb_pipein(urb->pipe) != USB_DIR_IN);
++ }
++ if (hc->ep_is_in) {
++ hc->do_ping = 0;
++ }
++ hc->data_pid_start = DWC_OTG_HC_PID_DATA1;
++ hc->xfer_len = 0;
++ if (hcd->core_if->dma_enable) {
++ hc->xfer_buff = (uint8_t *)hcd->status_buf_dma;
++ } else {
++ hc->xfer_buff = (uint8_t *)hcd->status_buf;
++ }
++ break;
++ }
++ break;
++ case PIPE_BULK:
++ hc->ep_type = DWC_OTG_EP_TYPE_BULK;
++ break;
++ case PIPE_INTERRUPT:
++ hc->ep_type = DWC_OTG_EP_TYPE_INTR;
++ break;
++ case PIPE_ISOCHRONOUS:
++ {
++ struct usb_iso_packet_descriptor *frame_desc;
++ frame_desc = &urb->iso_frame_desc[qtd->isoc_frame_index];
++ hc->ep_type = DWC_OTG_EP_TYPE_ISOC;
++ if (hcd->core_if->dma_enable) {
++ hc->xfer_buff = (uint8_t *)urb->transfer_dma;
++ } else {
++ hc->xfer_buff = (uint8_t *)urb->transfer_buffer;
++ }
++ hc->xfer_buff += frame_desc->offset + qtd->isoc_split_offset;
++ hc->xfer_len = frame_desc->length - qtd->isoc_split_offset;
++
++ if (hc->xact_pos == DWC_HCSPLIT_XACTPOS_ALL) {
++ if (hc->xfer_len <= 188) {
++ hc->xact_pos = DWC_HCSPLIT_XACTPOS_ALL;
++ }
++ else {
++ hc->xact_pos = DWC_HCSPLIT_XACTPOS_BEGIN;
++ }
++ }
++ }
++ break;
++ }
++
++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++ /*
++ * This value may be modified when the transfer is started to
++ * reflect the actual transfer length.
++ */
++ hc->multi_count = dwc_hb_mult(qh->maxp);
++ }
++
++ dwc_otg_hc_init(hcd->core_if, hc);
++ hc->qh = qh;
++}
++
++/**
++ * This function selects transactions from the HCD transfer schedule and
++ * assigns them to available host channels. It is called from HCD interrupt
++ * handler functions.
++ *
++ * @param hcd The HCD state structure.
++ *
++ * @return The types of new transactions that were assigned to host channels.
++ */
++dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t *hcd)
++{
++ struct list_head *qh_ptr;
++ dwc_otg_qh_t *qh;
++ int num_channels;
++ dwc_otg_transaction_type_e ret_val = DWC_OTG_TRANSACTION_NONE;
++
++#ifdef DEBUG_SOF
++ DWC_DEBUGPL(DBG_HCD, " Select Transactions\n");
++#endif
++
++ /* Process entries in the periodic ready list. */
++ qh_ptr = hcd->periodic_sched_ready.next;
++ while (qh_ptr != &hcd->periodic_sched_ready &&
++ !list_empty(&hcd->free_hc_list)) {
++
++ qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry);
++ assign_and_init_hc(hcd, qh);
++
++ /*
++ * Move the QH from the periodic ready schedule to the
++ * periodic assigned schedule.
++ */
++ qh_ptr = qh_ptr->next;
++ list_move(&qh->qh_list_entry, &hcd->periodic_sched_assigned);
++
++ ret_val = DWC_OTG_TRANSACTION_PERIODIC;
++ }
++
++ /*
++ * Process entries in the inactive portion of the non-periodic
++ * schedule. Some free host channels may not be used if they are
++ * reserved for periodic transfers.
++ */
++ qh_ptr = hcd->non_periodic_sched_inactive.next;
++ num_channels = hcd->core_if->core_params->host_channels;
++ while (qh_ptr != &hcd->non_periodic_sched_inactive &&
++ (hcd->non_periodic_channels <
++ num_channels - hcd->periodic_channels) &&
++ !list_empty(&hcd->free_hc_list)) {
++
++ qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry);
++ assign_and_init_hc(hcd, qh);
++
++ /*
++ * Move the QH from the non-periodic inactive schedule to the
++ * non-periodic active schedule.
++ */
++ qh_ptr = qh_ptr->next;
++ list_move(&qh->qh_list_entry, &hcd->non_periodic_sched_active);
++
++ if (ret_val == DWC_OTG_TRANSACTION_NONE) {
++ ret_val = DWC_OTG_TRANSACTION_NON_PERIODIC;
++ } else {
++ ret_val = DWC_OTG_TRANSACTION_ALL;
++ }
++
++ hcd->non_periodic_channels++;
++ }
++
++ return ret_val;
++}
++
++/**
++ * Attempts to queue a single transaction request for a host channel
++ * associated with either a periodic or non-periodic transfer. This function
++ * assumes that there is space available in the appropriate request queue. For
++ * an OUT transfer or SETUP transaction in Slave mode, it checks whether space
++ * is available in the appropriate Tx FIFO.
++ *
++ * @param hcd The HCD state structure.
++ * @param hc Host channel descriptor associated with either a periodic or
++ * non-periodic transfer.
++ * @param fifo_dwords_avail Number of DWORDs available in the periodic Tx
++ * FIFO for periodic transfers or the non-periodic Tx FIFO for non-periodic
++ * transfers.
++ *
++ * @return 1 if a request is queued and more requests may be needed to
++ * complete the transfer, 0 if no more requests are required for this
++ * transfer, -1 if there is insufficient space in the Tx FIFO.
++ */
++static int queue_transaction(dwc_otg_hcd_t *hcd,
++ dwc_hc_t *hc,
++ uint16_t fifo_dwords_avail)
++{
++ int retval;
++
++ if (hcd->core_if->dma_enable) {
++ if (!hc->xfer_started) {
++ dwc_otg_hc_start_transfer(hcd->core_if, hc);
++ hc->qh->ping_state = 0;
++ }
++ retval = 0;
++ } else if (hc->halt_pending) {
++ /* Don't queue a request if the channel has been halted. */
++ retval = 0;
++ } else if (hc->halt_on_queue) {
++ dwc_otg_hc_halt(hcd->core_if, hc, hc->halt_status);
++ retval = 0;
++ } else if (hc->do_ping) {
++ if (!hc->xfer_started) {
++ dwc_otg_hc_start_transfer(hcd->core_if, hc);
++ }
++ retval = 0;
++ } else if (!hc->ep_is_in ||
++ hc->data_pid_start == DWC_OTG_HC_PID_SETUP) {
++ if ((fifo_dwords_avail * 4) >= hc->max_packet) {
++ if (!hc->xfer_started) {
++ dwc_otg_hc_start_transfer(hcd->core_if, hc);
++ retval = 1;
++ } else {
++ retval = dwc_otg_hc_continue_transfer(hcd->core_if, hc);
++ }
++ } else {
++ retval = -1;
++ }
++ } else {
++ if (!hc->xfer_started) {
++ dwc_otg_hc_start_transfer(hcd->core_if, hc);
++ retval = 1;
++ } else {
++ retval = dwc_otg_hc_continue_transfer(hcd->core_if, hc);
++ }
++ }
++
++ return retval;
++}
++
++/**
++ * Processes active non-periodic channels and queues transactions for these
++ * channels to the DWC_otg controller. After queueing transactions, the NP Tx
++ * FIFO Empty interrupt is enabled if there are more transactions to queue as
++ * NP Tx FIFO or request queue space becomes available. Otherwise, the NP Tx
++ * FIFO Empty interrupt is disabled.
++ */
++static void process_non_periodic_channels(dwc_otg_hcd_t *hcd)
++{
++ gnptxsts_data_t tx_status;
++ struct list_head *orig_qh_ptr;
++ dwc_otg_qh_t *qh;
++ int status;
++ int no_queue_space = 0;
++ int no_fifo_space = 0;
++ int more_to_do = 0;
++
++ dwc_otg_core_global_regs_t *global_regs = hcd->core_if->core_global_regs;
++
++ DWC_DEBUGPL(DBG_HCDV, "Queue non-periodic transactions\n");
++#ifdef DEBUG
++ tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts);
++ DWC_DEBUGPL(DBG_HCDV, " NP Tx Req Queue Space Avail (before queue): %d\n",
++ tx_status.b.nptxqspcavail);
++ DWC_DEBUGPL(DBG_HCDV, " NP Tx FIFO Space Avail (before queue): %d\n",
++ tx_status.b.nptxfspcavail);
++#endif
++ /*
++ * Keep track of the starting point. Skip over the start-of-list
++ * entry.
++ */
++ if (hcd->non_periodic_qh_ptr == &hcd->non_periodic_sched_active) {
++ hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next;
++ }
++ orig_qh_ptr = hcd->non_periodic_qh_ptr;
++
++ /*
++ * Process once through the active list or until no more space is
++ * available in the request queue or the Tx FIFO.
++ */
++ do {
++ tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts);
++ if (!hcd->core_if->dma_enable && tx_status.b.nptxqspcavail == 0) {
++ no_queue_space = 1;
++ break;
++ }
++
++ qh = list_entry(hcd->non_periodic_qh_ptr, dwc_otg_qh_t, qh_list_entry);
++ status = queue_transaction(hcd, qh->channel, tx_status.b.nptxfspcavail);
++
++ if (status > 0) {
++ more_to_do = 1;
++ } else if (status < 0) {
++ no_fifo_space = 1;
++ break;
++ }
++
++ /* Advance to next QH, skipping start-of-list entry. */
++ hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next;
++ if (hcd->non_periodic_qh_ptr == &hcd->non_periodic_sched_active) {
++ hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next;
++ }
++
++ } while (hcd->non_periodic_qh_ptr != orig_qh_ptr);
++
++ if (!hcd->core_if->dma_enable) {
++ gintmsk_data_t intr_mask = {.d32 = 0};
++ intr_mask.b.nptxfempty = 1;
++
++#ifdef DEBUG
++ tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts);
++ DWC_DEBUGPL(DBG_HCDV, " NP Tx Req Queue Space Avail (after queue): %d\n",
++ tx_status.b.nptxqspcavail);
++ DWC_DEBUGPL(DBG_HCDV, " NP Tx FIFO Space Avail (after queue): %d\n",
++ tx_status.b.nptxfspcavail);
++#endif
++ if (more_to_do || no_queue_space || no_fifo_space) {
++ /*
++ * May need to queue more transactions as the request
++ * queue or Tx FIFO empties. Enable the non-periodic
++ * Tx FIFO empty interrupt. (Always use the half-empty
++ * level to ensure that new requests are loaded as
++ * soon as possible.)
++ */
++ dwc_modify_reg32(&global_regs->gintmsk, 0, intr_mask.d32);
++ } else {
++ /*
++ * Disable the Tx FIFO empty interrupt since there are
++ * no more transactions that need to be queued right
++ * now. This function is called from interrupt
++ * handlers to queue more transactions as transfer
++ * states change.
++ */
++ dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0);
++ }
++ }
++}
++
++/**
++ * Processes periodic channels for the next frame and queues transactions for
++ * these channels to the DWC_otg controller. After queueing transactions, the
++ * Periodic Tx FIFO Empty interrupt is enabled if there are more transactions
++ * to queue as Periodic Tx FIFO or request queue space becomes available.
++ * Otherwise, the Periodic Tx FIFO Empty interrupt is disabled.
++ */
++static void process_periodic_channels(dwc_otg_hcd_t *hcd)
++{
++ hptxsts_data_t tx_status;
++ struct list_head *qh_ptr;
++ dwc_otg_qh_t *qh;
++ int status;
++ int no_queue_space = 0;
++ int no_fifo_space = 0;
++
++ dwc_otg_host_global_regs_t *host_regs;
++ host_regs = hcd->core_if->host_if->host_global_regs;
++
++ DWC_DEBUGPL(DBG_HCDV, "Queue periodic transactions\n");
++#ifdef DEBUG
++ tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts);
++ DWC_DEBUGPL(DBG_HCDV, " P Tx Req Queue Space Avail (before queue): %d\n",
++ tx_status.b.ptxqspcavail);
++ DWC_DEBUGPL(DBG_HCDV, " P Tx FIFO Space Avail (before queue): %d\n",
++ tx_status.b.ptxfspcavail);
++#endif
++
++ qh_ptr = hcd->periodic_sched_assigned.next;
++ while (qh_ptr != &hcd->periodic_sched_assigned) {
++ tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts);
++ if (tx_status.b.ptxqspcavail == 0) {
++ no_queue_space = 1;
++ break;
++ }
++
++ qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry);
++
++ /*
++ * Set a flag if we're queuing high-bandwidth in slave mode.
++ * The flag prevents any halts to get into the request queue in
++ * the middle of multiple high-bandwidth packets getting queued.
++ */
++ if (!hcd->core_if->dma_enable &&
++ qh->channel->multi_count > 1)
++ {
++ hcd->core_if->queuing_high_bandwidth = 1;
++ }
++
++ status = queue_transaction(hcd, qh->channel, tx_status.b.ptxfspcavail);
++ if (status < 0) {
++ no_fifo_space = 1;
++ break;
++ }
++
++ /*
++ * In Slave mode, stay on the current transfer until there is
++ * nothing more to do or the high-bandwidth request count is
++ * reached. In DMA mode, only need to queue one request. The
++ * controller automatically handles multiple packets for
++ * high-bandwidth transfers.
++ */
++ if (hcd->core_if->dma_enable || status == 0 ||
++ qh->channel->requests == qh->channel->multi_count) {
++ qh_ptr = qh_ptr->next;
++ /*
++ * Move the QH from the periodic assigned schedule to
++ * the periodic queued schedule.
++ */
++ list_move(&qh->qh_list_entry, &hcd->periodic_sched_queued);
++
++ /* done queuing high bandwidth */
++ hcd->core_if->queuing_high_bandwidth = 0;
++ }
++ }
++
++ if (!hcd->core_if->dma_enable) {
++ dwc_otg_core_global_regs_t *global_regs;
++ gintmsk_data_t intr_mask = {.d32 = 0};
++
++ global_regs = hcd->core_if->core_global_regs;
++ intr_mask.b.ptxfempty = 1;
++#ifdef DEBUG
++ tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts);
++ DWC_DEBUGPL(DBG_HCDV, " P Tx Req Queue Space Avail (after queue): %d\n",
++ tx_status.b.ptxqspcavail);
++ DWC_DEBUGPL(DBG_HCDV, " P Tx FIFO Space Avail (after queue): %d\n",
++ tx_status.b.ptxfspcavail);
++#endif
++ if (!list_empty(&hcd->periodic_sched_assigned) ||
++ no_queue_space || no_fifo_space) {
++ /*
++ * May need to queue more transactions as the request
++ * queue or Tx FIFO empties. Enable the periodic Tx
++ * FIFO empty interrupt. (Always use the half-empty
++ * level to ensure that new requests are loaded as
++ * soon as possible.)
++ */
++ dwc_modify_reg32(&global_regs->gintmsk, 0, intr_mask.d32);
++ } else {
++ /*
++ * Disable the Tx FIFO empty interrupt since there are
++ * no more transactions that need to be queued right
++ * now. This function is called from interrupt
++ * handlers to queue more transactions as transfer
++ * states change.
++ */
++ dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0);
++ }
++ }
++}
++
++/**
++ * This function processes the currently active host channels and queues
++ * transactions for these channels to the DWC_otg controller. It is called
++ * from HCD interrupt handler functions.
++ *
++ * @param hcd The HCD state structure.
++ * @param tr_type The type(s) of transactions to queue (non-periodic,
++ * periodic, or both).
++ */
++void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t *hcd,
++ dwc_otg_transaction_type_e tr_type)
++{
++#ifdef DEBUG_SOF
++ DWC_DEBUGPL(DBG_HCD, "Queue Transactions\n");
++#endif
++ /* Process host channels associated with periodic transfers. */
++ if ((tr_type == DWC_OTG_TRANSACTION_PERIODIC ||
++ tr_type == DWC_OTG_TRANSACTION_ALL) &&
++ !list_empty(&hcd->periodic_sched_assigned)) {
++
++ process_periodic_channels(hcd);
++ }
++
++ /* Process host channels associated with non-periodic transfers. */
++ if (tr_type == DWC_OTG_TRANSACTION_NON_PERIODIC ||
++ tr_type == DWC_OTG_TRANSACTION_ALL) {
++ if (!list_empty(&hcd->non_periodic_sched_active)) {
++ process_non_periodic_channels(hcd);
++ } else {
++ /*
++ * Ensure NP Tx FIFO empty interrupt is disabled when
++ * there are no non-periodic transfers to process.
++ */
++ gintmsk_data_t gintmsk = {.d32 = 0};
++ gintmsk.b.nptxfempty = 1;
++ dwc_modify_reg32(&hcd->core_if->core_global_regs->gintmsk,
++ gintmsk.d32, 0);
++ }
++ }
++}
++
++/**
++ * Sets the final status of an URB and returns it to the device driver. Any
++ * required cleanup of the URB is performed.
++ */
++void dwc_otg_hcd_complete_urb(dwc_otg_hcd_t *hcd, struct urb *urb, int status)
++{
++#ifdef DEBUG
++ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
++ DWC_PRINT("%s: urb %p, device %d, ep %d %s, status=%d\n",
++ __func__, urb, usb_pipedevice(urb->pipe),
++ usb_pipeendpoint(urb->pipe),
++ usb_pipein(urb->pipe) ? "IN" : "OUT", status);
++ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
++ int i;
++ for (i = 0; i < urb->number_of_packets; i++) {
++ DWC_PRINT(" ISO Desc %d status: %d\n",
++ i, urb->iso_frame_desc[i].status);
++ }
++ }
++ }
++#endif
++
++ urb->status = status;
++ urb->hcpriv = NULL;
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(hcd), urb, status);
++#else
++ usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(hcd), urb, NULL);
++#endif
++}
++
++/*
++ * Returns the Queue Head for an URB.
++ */
++dwc_otg_qh_t *dwc_urb_to_qh(struct urb *urb)
++{
++ struct usb_host_endpoint *ep = dwc_urb_to_endpoint(urb);
++ return (dwc_otg_qh_t *)ep->hcpriv;
++}
++
++#ifdef DEBUG
++void dwc_print_setup_data(uint8_t *setup)
++{
++ int i;
++ if (CHK_DEBUG_LEVEL(DBG_HCD)){
++ DWC_PRINT("Setup Data = MSB ");
++ for (i = 7; i >= 0; i--) DWC_PRINT("%02x ", setup[i]);
++ DWC_PRINT("\n");
++ DWC_PRINT(" bmRequestType Tranfer = %s\n", (setup[0] & 0x80) ? "Device-to-Host" : "Host-to-Device");
++ DWC_PRINT(" bmRequestType Type = ");
++ switch ((setup[0] & 0x60) >> 5) {
++ case 0: DWC_PRINT("Standard\n"); break;
++ case 1: DWC_PRINT("Class\n"); break;
++ case 2: DWC_PRINT("Vendor\n"); break;
++ case 3: DWC_PRINT("Reserved\n"); break;
++ }
++ DWC_PRINT(" bmRequestType Recipient = ");
++ switch (setup[0] & 0x1f) {
++ case 0: DWC_PRINT("Device\n"); break;
++ case 1: DWC_PRINT("Interface\n"); break;
++ case 2: DWC_PRINT("Endpoint\n"); break;
++ case 3: DWC_PRINT("Other\n"); break;
++ default: DWC_PRINT("Reserved\n"); break;
++ }
++ DWC_PRINT(" bRequest = 0x%0x\n", setup[1]);
++ DWC_PRINT(" wValue = 0x%0x\n", *((uint16_t *)&setup[2]));
++ DWC_PRINT(" wIndex = 0x%0x\n", *((uint16_t *)&setup[4]));
++ DWC_PRINT(" wLength = 0x%0x\n\n", *((uint16_t *)&setup[6]));
++ }
++}
++#endif
++
++void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t *hcd) {
++#if defined(DEBUG) && LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++ DWC_PRINT("Frame remaining at SOF:\n");
++ DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
++ hcd->frrem_samples, hcd->frrem_accum,
++ (hcd->frrem_samples > 0) ?
++ hcd->frrem_accum/hcd->frrem_samples : 0);
++
++ DWC_PRINT("\n");
++ DWC_PRINT("Frame remaining at start_transfer (uframe 7):\n");
++ DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
++ hcd->core_if->hfnum_7_samples, hcd->core_if->hfnum_7_frrem_accum,
++ (hcd->core_if->hfnum_7_samples > 0) ?
++ hcd->core_if->hfnum_7_frrem_accum/hcd->core_if->hfnum_7_samples : 0);
++ DWC_PRINT("Frame remaining at start_transfer (uframe 0):\n");
++ DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
++ hcd->core_if->hfnum_0_samples, hcd->core_if->hfnum_0_frrem_accum,
++ (hcd->core_if->hfnum_0_samples > 0) ?
++ hcd->core_if->hfnum_0_frrem_accum/hcd->core_if->hfnum_0_samples : 0);
++ DWC_PRINT("Frame remaining at start_transfer (uframe 1-6):\n");
++ DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
++ hcd->core_if->hfnum_other_samples, hcd->core_if->hfnum_other_frrem_accum,
++ (hcd->core_if->hfnum_other_samples > 0) ?
++ hcd->core_if->hfnum_other_frrem_accum/hcd->core_if->hfnum_other_samples : 0);
++
++ DWC_PRINT("\n");
++ DWC_PRINT("Frame remaining at sample point A (uframe 7):\n");
++ DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
++ hcd->hfnum_7_samples_a, hcd->hfnum_7_frrem_accum_a,
++ (hcd->hfnum_7_samples_a > 0) ?
++ hcd->hfnum_7_frrem_accum_a/hcd->hfnum_7_samples_a : 0);
++ DWC_PRINT("Frame remaining at sample point A (uframe 0):\n");
++ DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
++ hcd->hfnum_0_samples_a, hcd->hfnum_0_frrem_accum_a,
++ (hcd->hfnum_0_samples_a > 0) ?
++ hcd->hfnum_0_frrem_accum_a/hcd->hfnum_0_samples_a : 0);
++ DWC_PRINT("Frame remaining at sample point A (uframe 1-6):\n");
++ DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
++ hcd->hfnum_other_samples_a, hcd->hfnum_other_frrem_accum_a,
++ (hcd->hfnum_other_samples_a > 0) ?
++ hcd->hfnum_other_frrem_accum_a/hcd->hfnum_other_samples_a : 0);
++
++ DWC_PRINT("\n");
++ DWC_PRINT("Frame remaining at sample point B (uframe 7):\n");
++ DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
++ hcd->hfnum_7_samples_b, hcd->hfnum_7_frrem_accum_b,
++ (hcd->hfnum_7_samples_b > 0) ?
++ hcd->hfnum_7_frrem_accum_b/hcd->hfnum_7_samples_b : 0);
++ DWC_PRINT("Frame remaining at sample point B (uframe 0):\n");
++ DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
++ hcd->hfnum_0_samples_b, hcd->hfnum_0_frrem_accum_b,
++ (hcd->hfnum_0_samples_b > 0) ?
++ hcd->hfnum_0_frrem_accum_b/hcd->hfnum_0_samples_b : 0);
++ DWC_PRINT("Frame remaining at sample point B (uframe 1-6):\n");
++ DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
++ hcd->hfnum_other_samples_b, hcd->hfnum_other_frrem_accum_b,
++ (hcd->hfnum_other_samples_b > 0) ?
++ hcd->hfnum_other_frrem_accum_b/hcd->hfnum_other_samples_b : 0);
++#endif
++}
++
++void dwc_otg_hcd_dump_state(dwc_otg_hcd_t *hcd)
++{
++#ifdef DEBUG
++ int num_channels;
++ int i;
++ gnptxsts_data_t np_tx_status;
++ hptxsts_data_t p_tx_status;
++
++ num_channels = hcd->core_if->core_params->host_channels;
++ DWC_PRINT("\n");
++ DWC_PRINT("************************************************************\n");
++ DWC_PRINT("HCD State:\n");
++ DWC_PRINT(" Num channels: %d\n", num_channels);
++ for (i = 0; i < num_channels; i++) {
++ dwc_hc_t *hc = hcd->hc_ptr_array[i];
++ DWC_PRINT(" Channel %d:\n", i);
++ DWC_PRINT(" dev_addr: %d, ep_num: %d, ep_is_in: %d\n",
++ hc->dev_addr, hc->ep_num, hc->ep_is_in);
++ DWC_PRINT(" speed: %d\n", hc->speed);
++ DWC_PRINT(" ep_type: %d\n", hc->ep_type);
++ DWC_PRINT(" max_packet: %d\n", hc->max_packet);
++ DWC_PRINT(" data_pid_start: %d\n", hc->data_pid_start);
++ DWC_PRINT(" multi_count: %d\n", hc->multi_count);
++ DWC_PRINT(" xfer_started: %d\n", hc->xfer_started);
++ DWC_PRINT(" xfer_buff: %p\n", hc->xfer_buff);
++ DWC_PRINT(" xfer_len: %d\n", hc->xfer_len);
++ DWC_PRINT(" xfer_count: %d\n", hc->xfer_count);
++ DWC_PRINT(" halt_on_queue: %d\n", hc->halt_on_queue);
++ DWC_PRINT(" halt_pending: %d\n", hc->halt_pending);
++ DWC_PRINT(" halt_status: %d\n", hc->halt_status);
++ DWC_PRINT(" do_split: %d\n", hc->do_split);
++ DWC_PRINT(" complete_split: %d\n", hc->complete_split);
++ DWC_PRINT(" hub_addr: %d\n", hc->hub_addr);
++ DWC_PRINT(" port_addr: %d\n", hc->port_addr);
++ DWC_PRINT(" xact_pos: %d\n", hc->xact_pos);
++ DWC_PRINT(" requests: %d\n", hc->requests);
++ DWC_PRINT(" qh: %p\n", hc->qh);
++ if (hc->xfer_started) {
++ hfnum_data_t hfnum;
++ hcchar_data_t hcchar;
++ hctsiz_data_t hctsiz;
++ hcint_data_t hcint;
++ hcintmsk_data_t hcintmsk;
++ hfnum.d32 = dwc_read_reg32(&hcd->core_if->host_if->host_global_regs->hfnum);
++ hcchar.d32 = dwc_read_reg32(&hcd->core_if->host_if->hc_regs[i]->hcchar);
++ hctsiz.d32 = dwc_read_reg32(&hcd->core_if->host_if->hc_regs[i]->hctsiz);
++ hcint.d32 = dwc_read_reg32(&hcd->core_if->host_if->hc_regs[i]->hcint);
++ hcintmsk.d32 = dwc_read_reg32(&hcd->core_if->host_if->hc_regs[i]->hcintmsk);
++ DWC_PRINT(" hfnum: 0x%08x\n", hfnum.d32);
++ DWC_PRINT(" hcchar: 0x%08x\n", hcchar.d32);
++ DWC_PRINT(" hctsiz: 0x%08x\n", hctsiz.d32);
++ DWC_PRINT(" hcint: 0x%08x\n", hcint.d32);
++ DWC_PRINT(" hcintmsk: 0x%08x\n", hcintmsk.d32);
++ }
++ if (hc->xfer_started && hc->qh && hc->qh->qtd_in_process) {
++ dwc_otg_qtd_t *qtd;
++ struct urb *urb;
++ qtd = hc->qh->qtd_in_process;
++ urb = qtd->urb;
++ DWC_PRINT(" URB Info:\n");
++ DWC_PRINT(" qtd: %p, urb: %p\n", qtd, urb);
++ if (urb) {
++ DWC_PRINT(" Dev: %d, EP: %d %s\n",
++ usb_pipedevice(urb->pipe), usb_pipeendpoint(urb->pipe),
++ usb_pipein(urb->pipe) ? "IN" : "OUT");
++ DWC_PRINT(" Max packet size: %d\n",
++ usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
++ DWC_PRINT(" transfer_buffer: %p\n", urb->transfer_buffer);
++ DWC_PRINT(" transfer_dma: %p\n", (void *)urb->transfer_dma);
++ DWC_PRINT(" transfer_buffer_length: %d\n", urb->transfer_buffer_length);
++ DWC_PRINT(" actual_length: %d\n", urb->actual_length);
++ }
++ }
++ }
++ DWC_PRINT(" non_periodic_channels: %d\n", hcd->non_periodic_channels);
++ DWC_PRINT(" periodic_channels: %d\n", hcd->periodic_channels);
++ DWC_PRINT(" periodic_usecs: %d\n", hcd->periodic_usecs);
++ np_tx_status.d32 = dwc_read_reg32(&hcd->core_if->core_global_regs->gnptxsts);
++ DWC_PRINT(" NP Tx Req Queue Space Avail: %d\n", np_tx_status.b.nptxqspcavail);
++ DWC_PRINT(" NP Tx FIFO Space Avail: %d\n", np_tx_status.b.nptxfspcavail);
++ p_tx_status.d32 = dwc_read_reg32(&hcd->core_if->host_if->host_global_regs->hptxsts);
++ DWC_PRINT(" P Tx Req Queue Space Avail: %d\n", p_tx_status.b.ptxqspcavail);
++ DWC_PRINT(" P Tx FIFO Space Avail: %d\n", p_tx_status.b.ptxfspcavail);
++ dwc_otg_hcd_dump_frrem(hcd);
++ dwc_otg_dump_global_registers(hcd->core_if);
++ dwc_otg_dump_host_registers(hcd->core_if);
++ DWC_PRINT("************************************************************\n");
++ DWC_PRINT("\n");
++#endif
++}
++#endif /* DWC_DEVICE_ONLY */
+diff --git a/drivers/usb/dwc_otg/dwc_otg_hcd.h b/drivers/usb/dwc_otg/dwc_otg_hcd.h
+new file mode 100644
+index 0000000..ee41dc9
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_hcd.h
+@@ -0,0 +1,668 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd.h $
++ * $Revision: 1.3 $
++ * $Date: 2008-12-15 06:51:32 $
++ * $Change: 1064918 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_DEVICE_ONLY
++#ifndef __DWC_HCD_H__
++#define __DWC_HCD_H__
++
++#include <linux/list.h>
++#include <linux/usb.h>
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,35)
++#include <linux/usb/hcd.h>
++#else
++#include <../drivers/usb/core/hcd.h>
++#endif
++
++struct dwc_otg_device;
++
++#include "dwc_otg_cil.h"
++
++/**
++ * @file
++ *
++ * This file contains the structures, constants, and interfaces for
++ * the Host Contoller Driver (HCD).
++ *
++ * The Host Controller Driver (HCD) is responsible for translating requests
++ * from the USB Driver into the appropriate actions on the DWC_otg controller.
++ * It isolates the USBD from the specifics of the controller by providing an
++ * API to the USBD.
++ */
++
++/**
++ * Phases for control transfers.
++ */
++typedef enum dwc_otg_control_phase {
++ DWC_OTG_CONTROL_SETUP,
++ DWC_OTG_CONTROL_DATA,
++ DWC_OTG_CONTROL_STATUS
++} dwc_otg_control_phase_e;
++
++/** Transaction types. */
++typedef enum dwc_otg_transaction_type {
++ DWC_OTG_TRANSACTION_NONE,
++ DWC_OTG_TRANSACTION_PERIODIC,
++ DWC_OTG_TRANSACTION_NON_PERIODIC,
++ DWC_OTG_TRANSACTION_ALL
++} dwc_otg_transaction_type_e;
++
++/**
++ * A Queue Transfer Descriptor (QTD) holds the state of a bulk, control,
++ * interrupt, or isochronous transfer. A single QTD is created for each URB
++ * (of one of these types) submitted to the HCD. The transfer associated with
++ * a QTD may require one or multiple transactions.
++ *
++ * A QTD is linked to a Queue Head, which is entered in either the
++ * non-periodic or periodic schedule for execution. When a QTD is chosen for
++ * execution, some or all of its transactions may be executed. After
++ * execution, the state of the QTD is updated. The QTD may be retired if all
++ * its transactions are complete or if an error occurred. Otherwise, it
++ * remains in the schedule so more transactions can be executed later.
++ */
++typedef struct dwc_otg_qtd {
++ /**
++ * Determines the PID of the next data packet for the data phase of
++ * control transfers. Ignored for other transfer types.<br>
++ * One of the following values:
++ * - DWC_OTG_HC_PID_DATA0
++ * - DWC_OTG_HC_PID_DATA1
++ */
++ uint8_t data_toggle;
++
++ /** Current phase for control transfers (Setup, Data, or Status). */
++ dwc_otg_control_phase_e control_phase;
++
++ /** Keep track of the current split type
++ * for FS/LS endpoints on a HS Hub */
++ uint8_t complete_split;
++
++ /** How many bytes transferred during SSPLIT OUT */
++ uint32_t ssplit_out_xfer_count;
++
++ /**
++ * Holds the number of bus errors that have occurred for a transaction
++ * within this transfer.
++ */
++ uint8_t error_count;
++
++ /**
++ * Index of the next frame descriptor for an isochronous transfer. A
++ * frame descriptor describes the buffer position and length of the
++ * data to be transferred in the next scheduled (micro)frame of an
++ * isochronous transfer. It also holds status for that transaction.
++ * The frame index starts at 0.
++ */
++ int isoc_frame_index;
++
++ /** Position of the ISOC split on full/low speed */
++ uint8_t isoc_split_pos;
++
++ /** Position of the ISOC split in the buffer for the current frame */
++ uint16_t isoc_split_offset;
++
++ /** URB for this transfer */
++ struct urb *urb;
++
++ /** This list of QTDs */
++ struct list_head qtd_list_entry;
++
++} dwc_otg_qtd_t;
++
++/**
++ * A Queue Head (QH) holds the static characteristics of an endpoint and
++ * maintains a list of transfers (QTDs) for that endpoint. A QH structure may
++ * be entered in either the non-periodic or periodic schedule.
++ */
++typedef struct dwc_otg_qh {
++ /**
++ * Endpoint type.
++ * One of the following values:
++ * - USB_ENDPOINT_XFER_CONTROL
++ * - USB_ENDPOINT_XFER_ISOC
++ * - USB_ENDPOINT_XFER_BULK
++ * - USB_ENDPOINT_XFER_INT
++ */
++ uint8_t ep_type;
++ uint8_t ep_is_in;
++
++ /** wMaxPacketSize Field of Endpoint Descriptor. */
++ uint16_t maxp;
++
++ /**
++ * Determines the PID of the next data packet for non-control
++ * transfers. Ignored for control transfers.<br>
++ * One of the following values:
++ * - DWC_OTG_HC_PID_DATA0
++ * - DWC_OTG_HC_PID_DATA1
++ */
++ uint8_t data_toggle;
++
++ /** Ping state if 1. */
++ uint8_t ping_state;
++
++ /**
++ * List of QTDs for this QH.
++ */
++ struct list_head qtd_list;
++
++ /** Host channel currently processing transfers for this QH. */
++ dwc_hc_t *channel;
++
++ /** QTD currently assigned to a host channel for this QH. */
++ dwc_otg_qtd_t *qtd_in_process;
++
++ /** Full/low speed endpoint on high-speed hub requires split. */
++ uint8_t do_split;
++
++ /** @name Periodic schedule information */
++ /** @{ */
++
++ /** Bandwidth in microseconds per (micro)frame. */
++ uint8_t usecs;
++
++ /** Interval between transfers in (micro)frames. */
++ uint16_t interval;
++
++ /**
++ * (micro)frame to initialize a periodic transfer. The transfer
++ * executes in the following (micro)frame.
++ */
++ uint16_t sched_frame;
++
++ /** (micro)frame at which last start split was initialized. */
++ uint16_t start_split_frame;
++
++ /** @} */
++
++ /** Entry for QH in either the periodic or non-periodic schedule. */
++ struct list_head qh_list_entry;
++
++ /* For non-dword aligned buffer support */
++ uint8_t *dw_align_buf;
++ dma_addr_t dw_align_buf_dma;
++} dwc_otg_qh_t;
++
++/**
++ * This structure holds the state of the HCD, including the non-periodic and
++ * periodic schedules.
++ */
++typedef struct dwc_otg_hcd {
++ /** The DWC otg device pointer */
++ struct dwc_otg_device *otg_dev;
++
++ /** DWC OTG Core Interface Layer */
++ dwc_otg_core_if_t *core_if;
++
++ /** Internal DWC HCD Flags */
++ volatile union dwc_otg_hcd_internal_flags {
++ uint32_t d32;
++ struct {
++ unsigned port_connect_status_change : 1;
++ unsigned port_connect_status : 1;
++ unsigned port_reset_change : 1;
++ unsigned port_enable_change : 1;
++ unsigned port_suspend_change : 1;
++ unsigned port_over_current_change : 1;
++ unsigned reserved : 27;
++ } b;
++ } flags;
++
++ /**
++ * Inactive items in the non-periodic schedule. This is a list of
++ * Queue Heads. Transfers associated with these Queue Heads are not
++ * currently assigned to a host channel.
++ */
++ struct list_head non_periodic_sched_inactive;
++
++ /**
++ * Active items in the non-periodic schedule. This is a list of
++ * Queue Heads. Transfers associated with these Queue Heads are
++ * currently assigned to a host channel.
++ */
++ struct list_head non_periodic_sched_active;
++
++ /**
++ * Pointer to the next Queue Head to process in the active
++ * non-periodic schedule.
++ */
++ struct list_head *non_periodic_qh_ptr;
++
++ /**
++ * Inactive items in the periodic schedule. This is a list of QHs for
++ * periodic transfers that are _not_ scheduled for the next frame.
++ * Each QH in the list has an interval counter that determines when it
++ * needs to be scheduled for execution. This scheduling mechanism
++ * allows only a simple calculation for periodic bandwidth used (i.e.
++ * must assume that all periodic transfers may need to execute in the
++ * same frame). However, it greatly simplifies scheduling and should
++ * be sufficient for the vast majority of OTG hosts, which need to
++ * connect to a small number of peripherals at one time.
++ *
++ * Items move from this list to periodic_sched_ready when the QH
++ * interval counter is 0 at SOF.
++ */
++ struct list_head periodic_sched_inactive;
++
++ /**
++ * List of periodic QHs that are ready for execution in the next
++ * frame, but have not yet been assigned to host channels.
++ *
++ * Items move from this list to periodic_sched_assigned as host
++ * channels become available during the current frame.
++ */
++ struct list_head periodic_sched_ready;
++
++ /**
++ * List of periodic QHs to be executed in the next frame that are
++ * assigned to host channels.
++ *
++ * Items move from this list to periodic_sched_queued as the
++ * transactions for the QH are queued to the DWC_otg controller.
++ */
++ struct list_head periodic_sched_assigned;
++
++ /**
++ * List of periodic QHs that have been queued for execution.
++ *
++ * Items move from this list to either periodic_sched_inactive or
++ * periodic_sched_ready when the channel associated with the transfer
++ * is released. If the interval for the QH is 1, the item moves to
++ * periodic_sched_ready because it must be rescheduled for the next
++ * frame. Otherwise, the item moves to periodic_sched_inactive.
++ */
++ struct list_head periodic_sched_queued;
++
++ /**
++ * Total bandwidth claimed so far for periodic transfers. This value
++ * is in microseconds per (micro)frame. The assumption is that all
++ * periodic transfers may occur in the same (micro)frame.
++ */
++ uint16_t periodic_usecs;
++
++ /**
++ * Frame number read from the core at SOF. The value ranges from 0 to
++ * DWC_HFNUM_MAX_FRNUM.
++ */
++ uint16_t frame_number;
++
++ /**
++ * Free host channels in the controller. This is a list of
++ * dwc_hc_t items.
++ */
++ struct list_head free_hc_list;
++
++ /**
++ * Number of host channels assigned to periodic transfers. Currently
++ * assuming that there is a dedicated host channel for each periodic
++ * transaction and at least one host channel available for
++ * non-periodic transactions.
++ */
++ int periodic_channels;
++
++ /**
++ * Number of host channels assigned to non-periodic transfers.
++ */
++ int non_periodic_channels;
++
++ /**
++ * Array of pointers to the host channel descriptors. Allows accessing
++ * a host channel descriptor given the host channel number. This is
++ * useful in interrupt handlers.
++ */
++ dwc_hc_t *hc_ptr_array[MAX_EPS_CHANNELS];
++
++ /**
++ * Buffer to use for any data received during the status phase of a
++ * control transfer. Normally no data is transferred during the status
++ * phase. This buffer is used as a bit bucket.
++ */
++ uint8_t *status_buf;
++
++ /**
++ * DMA address for status_buf.
++ */
++ dma_addr_t status_buf_dma;
++#define DWC_OTG_HCD_STATUS_BUF_SIZE 64
++
++ /**
++ * Structure to allow starting the HCD in a non-interrupt context
++ * during an OTG role change.
++ */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++ struct work_struct start_work;
++#else
++ struct delayed_work start_work;
++#endif
++
++ /**
++ * Connection timer. An OTG host must display a message if the device
++ * does not connect. Started when the VBus power is turned on via
++ * sysfs attribute "buspower".
++ */
++ struct timer_list conn_timer;
++
++ /* Tasket to do a reset */
++ struct tasklet_struct *reset_tasklet;
++
++ /* */
++ spinlock_t lock;
++
++#ifdef DEBUG
++ uint32_t frrem_samples;
++ uint64_t frrem_accum;
++
++ uint32_t hfnum_7_samples_a;
++ uint64_t hfnum_7_frrem_accum_a;
++ uint32_t hfnum_0_samples_a;
++ uint64_t hfnum_0_frrem_accum_a;
++ uint32_t hfnum_other_samples_a;
++ uint64_t hfnum_other_frrem_accum_a;
++
++ uint32_t hfnum_7_samples_b;
++ uint64_t hfnum_7_frrem_accum_b;
++ uint32_t hfnum_0_samples_b;
++ uint64_t hfnum_0_frrem_accum_b;
++ uint32_t hfnum_other_samples_b;
++ uint64_t hfnum_other_frrem_accum_b;
++#endif
++} dwc_otg_hcd_t;
++
++/** Gets the dwc_otg_hcd from a struct usb_hcd */
++static inline dwc_otg_hcd_t *hcd_to_dwc_otg_hcd(struct usb_hcd *hcd)
++{
++ return (dwc_otg_hcd_t *)(hcd->hcd_priv);
++}
++
++/** Gets the struct usb_hcd that contains a dwc_otg_hcd_t. */
++static inline struct usb_hcd *dwc_otg_hcd_to_hcd(dwc_otg_hcd_t *dwc_otg_hcd)
++{
++ return container_of((void *)dwc_otg_hcd, struct usb_hcd, hcd_priv);
++}
++
++/** @name HCD Create/Destroy Functions */
++/** @{ */
++extern int dwc_otg_hcd_init(struct device *dev);
++extern void dwc_otg_hcd_remove(struct device *dev);
++/** @} */
++
++/** @name Linux HC Driver API Functions */
++/** @{ */
++
++extern int dwc_otg_hcd_start(struct usb_hcd *hcd);
++extern void dwc_otg_hcd_stop(struct usb_hcd *hcd);
++extern int dwc_otg_hcd_get_frame_number(struct usb_hcd *hcd);
++extern void dwc_otg_hcd_free(struct usb_hcd *hcd);
++extern int dwc_otg_hcd_urb_enqueue(struct usb_hcd *hcd,
++ struct urb *urb,
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++ int mem_flags
++#else
++ gfp_t mem_flags
++#endif
++ );
++extern int dwc_otg_hcd_urb_dequeue(struct usb_hcd *hcd,
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++#endif
++ struct urb *urb, int status);
++extern void dwc_otg_hcd_endpoint_disable(struct usb_hcd *hcd,
++ struct usb_host_endpoint *ep);
++extern irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++ , struct pt_regs *regs
++#endif
++ );
++extern int dwc_otg_hcd_hub_status_data(struct usb_hcd *hcd,
++ char *buf);
++extern int dwc_otg_hcd_hub_control(struct usb_hcd *hcd,
++ u16 typeReq,
++ u16 wValue,
++ u16 wIndex,
++ char *buf,
++ u16 wLength);
++
++/** @} */
++
++/** @name Transaction Execution Functions */
++/** @{ */
++extern dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t *hcd);
++extern void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t *hcd,
++ dwc_otg_transaction_type_e tr_type);
++extern void dwc_otg_hcd_complete_urb(dwc_otg_hcd_t *_hcd, struct urb *urb,
++ int status);
++/** @} */
++
++/** @name Interrupt Handler Functions */
++/** @{ */
++extern int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t *dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd_t *dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd_t *dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd_t *dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd_t *dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_incomplete_periodic_intr(dwc_otg_hcd_t *dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_port_intr(dwc_otg_hcd_t *dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_conn_id_status_change_intr(dwc_otg_hcd_t *dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_disconnect_intr(dwc_otg_hcd_t *dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd_t *dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd_t *dwc_otg_hcd, uint32_t num);
++extern int32_t dwc_otg_hcd_handle_session_req_intr(dwc_otg_hcd_t *dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_wakeup_detected_intr(dwc_otg_hcd_t *dwc_otg_hcd);
++/** @} */
++
++
++/** @name Schedule Queue Functions */
++/** @{ */
++
++/* Implemented in dwc_otg_hcd_queue.c */
++extern dwc_otg_qh_t *dwc_otg_hcd_qh_create(dwc_otg_hcd_t *hcd, struct urb *urb);
++extern void dwc_otg_hcd_qh_init(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, struct urb *urb);
++extern void dwc_otg_hcd_qh_free(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh);
++extern int dwc_otg_hcd_qh_add(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh);
++extern void dwc_otg_hcd_qh_remove(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh);
++extern void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, int sched_csplit);
++
++/** Remove and free a QH */
++static inline void dwc_otg_hcd_qh_remove_and_free(dwc_otg_hcd_t *hcd,
++ dwc_otg_qh_t *qh)
++{
++ dwc_otg_hcd_qh_remove(hcd, qh);
++ dwc_otg_hcd_qh_free(hcd, qh);
++}
++
++/** Allocates memory for a QH structure.
++ * @return Returns the memory allocate or NULL on error. */
++static inline dwc_otg_qh_t *dwc_otg_hcd_qh_alloc(void)
++{
++ return (dwc_otg_qh_t *) kmalloc(sizeof(dwc_otg_qh_t), GFP_KERNEL);
++}
++
++extern dwc_otg_qtd_t *dwc_otg_hcd_qtd_create(struct urb *urb);
++extern void dwc_otg_hcd_qtd_init(dwc_otg_qtd_t *qtd, struct urb *urb);
++extern int dwc_otg_hcd_qtd_add(dwc_otg_qtd_t *qtd, dwc_otg_hcd_t *dwc_otg_hcd);
++
++/** Allocates memory for a QTD structure.
++ * @return Returns the memory allocate or NULL on error. */
++static inline dwc_otg_qtd_t *dwc_otg_hcd_qtd_alloc(void)
++{
++ return (dwc_otg_qtd_t *) kmalloc(sizeof(dwc_otg_qtd_t), GFP_KERNEL);
++}
++
++/** Frees the memory for a QTD structure. QTD should already be removed from
++ * list.
++ * @param[in] qtd QTD to free.*/
++static inline void dwc_otg_hcd_qtd_free(dwc_otg_qtd_t *qtd)
++{
++ kfree(qtd);
++}
++
++/** Removes a QTD from list.
++ * @param[in] hcd HCD instance.
++ * @param[in] qtd QTD to remove from list. */
++static inline void dwc_otg_hcd_qtd_remove(dwc_otg_hcd_t *hcd, dwc_otg_qtd_t *qtd)
++{
++ unsigned long flags;
++ SPIN_LOCK_IRQSAVE(&hcd->lock, flags);
++ list_del(&qtd->qtd_list_entry);
++ SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags);
++}
++
++/** Remove and free a QTD */
++static inline void dwc_otg_hcd_qtd_remove_and_free(dwc_otg_hcd_t *hcd, dwc_otg_qtd_t *qtd)
++{
++ dwc_otg_hcd_qtd_remove(hcd, qtd);
++ dwc_otg_hcd_qtd_free(qtd);
++}
++
++/** @} */
++
++
++/** @name Internal Functions */
++/** @{ */
++dwc_otg_qh_t *dwc_urb_to_qh(struct urb *urb);
++void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t *hcd);
++void dwc_otg_hcd_dump_state(dwc_otg_hcd_t *hcd);
++/** @} */
++
++/** Gets the usb_host_endpoint associated with an URB. */
++static inline struct usb_host_endpoint *dwc_urb_to_endpoint(struct urb *urb)
++{
++ struct usb_device *dev = urb->dev;
++ int ep_num = usb_pipeendpoint(urb->pipe);
++
++ if (usb_pipein(urb->pipe))
++ return dev->ep_in[ep_num];
++ else
++ return dev->ep_out[ep_num];
++}
++
++/**
++ * Gets the endpoint number from a _bEndpointAddress argument. The endpoint is
++ * qualified with its direction (possible 32 endpoints per device).
++ */
++#define dwc_ep_addr_to_endpoint(_bEndpointAddress_) ((_bEndpointAddress_ & USB_ENDPOINT_NUMBER_MASK) | \
++ ((_bEndpointAddress_ & USB_DIR_IN) != 0) << 4)
++
++/** Gets the QH that contains the list_head */
++#define dwc_list_to_qh(_list_head_ptr_) container_of(_list_head_ptr_, dwc_otg_qh_t, qh_list_entry)
++
++/** Gets the QTD that contains the list_head */
++#define dwc_list_to_qtd(_list_head_ptr_) container_of(_list_head_ptr_, dwc_otg_qtd_t, qtd_list_entry)
++
++/** Check if QH is non-periodic */
++#define dwc_qh_is_non_per(_qh_ptr_) ((_qh_ptr_->ep_type == USB_ENDPOINT_XFER_BULK) || \
++ (_qh_ptr_->ep_type == USB_ENDPOINT_XFER_CONTROL))
++
++/** High bandwidth multiplier as encoded in highspeed endpoint descriptors */
++#define dwc_hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
++
++/** Packet size for any kind of endpoint descriptor */
++#define dwc_max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff)
++
++/**
++ * Returns true if _frame1 is less than or equal to _frame2. The comparison is
++ * done modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the
++ * frame number when the max frame number is reached.
++ */
++static inline int dwc_frame_num_le(uint16_t frame1, uint16_t frame2)
++{
++ return ((frame2 - frame1) & DWC_HFNUM_MAX_FRNUM) <=
++ (DWC_HFNUM_MAX_FRNUM >> 1);
++}
++
++/**
++ * Returns true if _frame1 is greater than _frame2. The comparison is done
++ * modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the frame
++ * number when the max frame number is reached.
++ */
++static inline int dwc_frame_num_gt(uint16_t frame1, uint16_t frame2)
++{
++ return (frame1 != frame2) &&
++ (((frame1 - frame2) & DWC_HFNUM_MAX_FRNUM) <
++ (DWC_HFNUM_MAX_FRNUM >> 1));
++}
++
++/**
++ * Increments _frame by the amount specified by _inc. The addition is done
++ * modulo DWC_HFNUM_MAX_FRNUM. Returns the incremented value.
++ */
++static inline uint16_t dwc_frame_num_inc(uint16_t frame, uint16_t inc)
++{
++ return (frame + inc) & DWC_HFNUM_MAX_FRNUM;
++}
++
++static inline uint16_t dwc_full_frame_num(uint16_t frame)
++{
++ return (frame & DWC_HFNUM_MAX_FRNUM) >> 3;
++}
++
++static inline uint16_t dwc_micro_frame_num(uint16_t frame)
++{
++ return frame & 0x7;
++}
++
++#ifdef DEBUG
++/**
++ * Macro to sample the remaining PHY clocks left in the current frame. This
++ * may be used during debugging to determine the average time it takes to
++ * execute sections of code. There are two possible sample points, "a" and
++ * "b", so the _letter argument must be one of these values.
++ *
++ * To dump the average sample times, read the "hcd_frrem" sysfs attribute. For
++ * example, "cat /sys/devices/lm0/hcd_frrem".
++ */
++#define dwc_sample_frrem(_hcd, _qh, _letter) \
++{ \
++ hfnum_data_t hfnum; \
++ dwc_otg_qtd_t *qtd; \
++ qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry); \
++ if (usb_pipeint(qtd->urb->pipe) && _qh->start_split_frame != 0 && !qtd->complete_split) { \
++ hfnum.d32 = dwc_read_reg32(&_hcd->core_if->host_if->host_global_regs->hfnum); \
++ switch (hfnum.b.frnum & 0x7) { \
++ case 7: \
++ _hcd->hfnum_7_samples_##_letter++; \
++ _hcd->hfnum_7_frrem_accum_##_letter += hfnum.b.frrem; \
++ break; \
++ case 0: \
++ _hcd->hfnum_0_samples_##_letter++; \
++ _hcd->hfnum_0_frrem_accum_##_letter += hfnum.b.frrem; \
++ break; \
++ default: \
++ _hcd->hfnum_other_samples_##_letter++; \
++ _hcd->hfnum_other_frrem_accum_##_letter += hfnum.b.frrem; \
++ break; \
++ } \
++ } \
++}
++#else
++#define dwc_sample_frrem(_hcd, _qh, _letter)
++#endif
++#endif
++#endif /* DWC_DEVICE_ONLY */
+diff --git a/drivers/usb/dwc_otg/dwc_otg_hcd_intr.c b/drivers/usb/dwc_otg/dwc_otg_hcd_intr.c
+new file mode 100644
+index 0000000..bdf2db9
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_hcd_intr.c
+@@ -0,0 +1,1873 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_intr.c $
++ * $Revision: 1.6.2.1 $
++ * $Date: 2009-04-22 03:48:22 $
++ * $Change: 1117667 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_DEVICE_ONLY
++
++#include <linux/version.h>
++
++#include "dwc_otg_driver.h"
++#include "dwc_otg_hcd.h"
++#include "dwc_otg_regs.h"
++
++/** @file
++ * This file contains the implementation of the HCD Interrupt handlers.
++ */
++
++/** This function handles interrupts for the HCD. */
++int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t *dwc_otg_hcd)
++{
++ int retval = 0;
++
++ dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
++ gintsts_data_t gintsts;
++#ifdef DEBUG
++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++#endif
++
++ /* Check if HOST Mode */
++ if (dwc_otg_is_host_mode(core_if)) {
++ gintsts.d32 = dwc_otg_read_core_intr(core_if);
++ if (!gintsts.d32) {
++ return 0;
++ }
++
++#ifdef DEBUG
++ /* Don't print debug message in the interrupt handler on SOF */
++# ifndef DEBUG_SOF
++ if (gintsts.d32 != DWC_SOF_INTR_MASK)
++# endif
++ DWC_DEBUGPL(DBG_HCD, "\n");
++#endif
++
++#ifdef DEBUG
++# ifndef DEBUG_SOF
++ if (gintsts.d32 != DWC_SOF_INTR_MASK)
++# endif
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Interrupt Detected gintsts&gintmsk=0x%08x\n", gintsts.d32);
++#endif
++ if (gintsts.b.usbreset) {
++ DWC_PRINT("Usb Reset In Host Mode\n");
++ }
++
++
++ if (gintsts.b.sofintr) {
++ retval |= dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd);
++ }
++ if (gintsts.b.rxstsqlvl) {
++ retval |= dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd);
++ }
++ if (gintsts.b.nptxfempty) {
++ retval |= dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd);
++ }
++ if (gintsts.b.i2cintr) {
++ /** @todo Implement i2cintr handler. */
++ }
++ if (gintsts.b.portintr) {
++ retval |= dwc_otg_hcd_handle_port_intr(dwc_otg_hcd);
++ }
++ if (gintsts.b.hcintr) {
++ retval |= dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd);
++ }
++ if (gintsts.b.ptxfempty) {
++ retval |= dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd);
++ }
++#ifdef DEBUG
++# ifndef DEBUG_SOF
++ if (gintsts.d32 != DWC_SOF_INTR_MASK)
++# endif
++ {
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Finished Servicing Interrupts\n");
++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintsts=0x%08x\n",
++ dwc_read_reg32(&global_regs->gintsts));
++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintmsk=0x%08x\n",
++ dwc_read_reg32(&global_regs->gintmsk));
++ }
++#endif
++
++#ifdef DEBUG
++# ifndef DEBUG_SOF
++ if (gintsts.d32 != DWC_SOF_INTR_MASK)
++# endif
++ DWC_DEBUGPL(DBG_HCD, "\n");
++#endif
++
++ }
++
++ S3C2410X_CLEAR_EINTPEND();
++
++ return retval;
++}
++
++#ifdef DWC_TRACK_MISSED_SOFS
++#warning Compiling code to track missed SOFs
++#define FRAME_NUM_ARRAY_SIZE 1000
++/**
++ * This function is for debug only.
++ */
++static inline void track_missed_sofs(uint16_t curr_frame_number)
++{
++ static uint16_t frame_num_array[FRAME_NUM_ARRAY_SIZE];
++ static uint16_t last_frame_num_array[FRAME_NUM_ARRAY_SIZE];
++ static int frame_num_idx = 0;
++ static uint16_t last_frame_num = DWC_HFNUM_MAX_FRNUM;
++ static int dumped_frame_num_array = 0;
++
++ if (frame_num_idx < FRAME_NUM_ARRAY_SIZE) {
++ if (((last_frame_num + 1) & DWC_HFNUM_MAX_FRNUM) != curr_frame_number) {
++ frame_num_array[frame_num_idx] = curr_frame_number;
++ last_frame_num_array[frame_num_idx++] = last_frame_num;
++ }
++ } else if (!dumped_frame_num_array) {
++ int i;
++ printk(KERN_EMERG USB_DWC "Frame Last Frame\n");
++ printk(KERN_EMERG USB_DWC "----- ----------\n");
++ for (i = 0; i < FRAME_NUM_ARRAY_SIZE; i++) {
++ printk(KERN_EMERG USB_DWC "0x%04x 0x%04x\n",
++ frame_num_array[i], last_frame_num_array[i]);
++ }
++ dumped_frame_num_array = 1;
++ }
++ last_frame_num = curr_frame_number;
++}
++#endif
++
++/**
++ * Handles the start-of-frame interrupt in host mode. Non-periodic
++ * transactions may be queued to the DWC_otg controller for the current
++ * (micro)frame. Periodic transactions may be queued to the controller for the
++ * next (micro)frame.
++ */
++int32_t dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd_t *hcd)
++{
++ hfnum_data_t hfnum;
++ struct list_head *qh_entry;
++ dwc_otg_qh_t *qh;
++ dwc_otg_transaction_type_e tr_type;
++ gintsts_data_t gintsts = {.d32 = 0};
++
++ hfnum.d32 = dwc_read_reg32(&hcd->core_if->host_if->host_global_regs->hfnum);
++
++#ifdef DEBUG_SOF
++ DWC_DEBUGPL(DBG_HCD, "--Start of Frame Interrupt--\n");
++#endif
++ hcd->frame_number = hfnum.b.frnum;
++
++#ifdef DEBUG
++ hcd->frrem_accum += hfnum.b.frrem;
++ hcd->frrem_samples++;
++#endif
++
++#ifdef DWC_TRACK_MISSED_SOFS
++ track_missed_sofs(hcd->frame_number);
++#endif
++
++ /* Determine whether any periodic QHs should be executed. */
++ qh_entry = hcd->periodic_sched_inactive.next;
++ while (qh_entry != &hcd->periodic_sched_inactive) {
++ qh = list_entry(qh_entry, dwc_otg_qh_t, qh_list_entry);
++ qh_entry = qh_entry->next;
++ if (dwc_frame_num_le(qh->sched_frame, hcd->frame_number)) {
++ /*
++ * Move QH to the ready list to be executed next
++ * (micro)frame.
++ */
++ list_move(&qh->qh_list_entry, &hcd->periodic_sched_ready);
++ }
++ }
++
++ tr_type = dwc_otg_hcd_select_transactions(hcd);
++ if (tr_type != DWC_OTG_TRANSACTION_NONE) {
++ dwc_otg_hcd_queue_transactions(hcd, tr_type);
++ }
++
++ /* Clear interrupt */
++ gintsts.b.sofintr = 1;
++ dwc_write_reg32(&hcd->core_if->core_global_regs->gintsts, gintsts.d32);
++
++ return 1;
++}
++
++/** Handles the Rx Status Queue Level Interrupt, which indicates that there is at
++ * least one packet in the Rx FIFO. The packets are moved from the FIFO to
++ * memory if the DWC_otg controller is operating in Slave mode. */
++int32_t dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd_t *dwc_otg_hcd)
++{
++ host_grxsts_data_t grxsts;
++ dwc_hc_t *hc = NULL;
++
++ DWC_DEBUGPL(DBG_HCD, "--RxStsQ Level Interrupt--\n");
++
++ grxsts.d32 = dwc_read_reg32(&dwc_otg_hcd->core_if->core_global_regs->grxstsp);
++
++ hc = dwc_otg_hcd->hc_ptr_array[grxsts.b.chnum];
++
++ /* Packet Status */
++ DWC_DEBUGPL(DBG_HCDV, " Ch num = %d\n", grxsts.b.chnum);
++ DWC_DEBUGPL(DBG_HCDV, " Count = %d\n", grxsts.b.bcnt);
++ DWC_DEBUGPL(DBG_HCDV, " DPID = %d, hc.dpid = %d\n", grxsts.b.dpid, hc->data_pid_start);
++ DWC_DEBUGPL(DBG_HCDV, " PStatus = %d\n", grxsts.b.pktsts);
++
++ switch (grxsts.b.pktsts) {
++ case DWC_GRXSTS_PKTSTS_IN:
++ /* Read the data into the host buffer. */
++ if (grxsts.b.bcnt > 0) {
++ dwc_otg_read_packet(dwc_otg_hcd->core_if,
++ hc->xfer_buff,
++ grxsts.b.bcnt);
++
++ /* Update the HC fields for the next packet received. */
++ hc->xfer_count += grxsts.b.bcnt;
++ hc->xfer_buff += grxsts.b.bcnt;
++ }
++
++ case DWC_GRXSTS_PKTSTS_IN_XFER_COMP:
++ case DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR:
++ case DWC_GRXSTS_PKTSTS_CH_HALTED:
++ /* Handled in interrupt, just ignore data */
++ break;
++ default:
++ DWC_ERROR("RX_STS_Q Interrupt: Unknown status %d\n", grxsts.b.pktsts);
++ break;
++ }
++
++ return 1;
++}
++
++/** This interrupt occurs when the non-periodic Tx FIFO is half-empty. More
++ * data packets may be written to the FIFO for OUT transfers. More requests
++ * may be written to the non-periodic request queue for IN transfers. This
++ * interrupt is enabled only in Slave mode. */
++int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd_t *dwc_otg_hcd)
++{
++ DWC_DEBUGPL(DBG_HCD, "--Non-Periodic TxFIFO Empty Interrupt--\n");
++ dwc_otg_hcd_queue_transactions(dwc_otg_hcd,
++ DWC_OTG_TRANSACTION_NON_PERIODIC);
++ return 1;
++}
++
++/** This interrupt occurs when the periodic Tx FIFO is half-empty. More data
++ * packets may be written to the FIFO for OUT transfers. More requests may be
++ * written to the periodic request queue for IN transfers. This interrupt is
++ * enabled only in Slave mode. */
++int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd_t *dwc_otg_hcd)
++{
++ DWC_DEBUGPL(DBG_HCD, "--Periodic TxFIFO Empty Interrupt--\n");
++ dwc_otg_hcd_queue_transactions(dwc_otg_hcd,
++ DWC_OTG_TRANSACTION_PERIODIC);
++ return 1;
++}
++
++/** There are multiple conditions that can cause a port interrupt. This function
++ * determines which interrupt conditions have occurred and handles them
++ * appropriately. */
++int32_t dwc_otg_hcd_handle_port_intr(dwc_otg_hcd_t *dwc_otg_hcd)
++{
++ int retval = 0;
++ hprt0_data_t hprt0;
++ hprt0_data_t hprt0_modify;
++
++ hprt0.d32 = dwc_read_reg32(dwc_otg_hcd->core_if->host_if->hprt0);
++ hprt0_modify.d32 = dwc_read_reg32(dwc_otg_hcd->core_if->host_if->hprt0);
++
++ /* Clear appropriate bits in HPRT0 to clear the interrupt bit in
++ * GINTSTS */
++
++ hprt0_modify.b.prtena = 0;
++ hprt0_modify.b.prtconndet = 0;
++ hprt0_modify.b.prtenchng = 0;
++ hprt0_modify.b.prtovrcurrchng = 0;
++
++ /* Port Connect Detected
++ * Set flag and clear if detected */
++ if (hprt0.b.prtconndet) {
++ DWC_DEBUGPL(DBG_HCD, "--Port Interrupt HPRT0=0x%08x "
++ "Port Connect Detected--\n", hprt0.d32);
++ dwc_otg_hcd->flags.b.port_connect_status_change = 1;
++ dwc_otg_hcd->flags.b.port_connect_status = 1;
++ hprt0_modify.b.prtconndet = 1;
++
++ /* B-Device has connected, Delete the connection timer. */
++ del_timer( &dwc_otg_hcd->conn_timer );
++
++ /* The Hub driver asserts a reset when it sees port connect
++ * status change flag */
++ retval |= 1;
++ }
++
++ /* Port Enable Changed
++ * Clear if detected - Set internal flag if disabled */
++ if (hprt0.b.prtenchng) {
++ DWC_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT0=0x%08x "
++ "Port Enable Changed--\n", hprt0.d32);
++ hprt0_modify.b.prtenchng = 1;
++ if (hprt0.b.prtena == 1) {
++ int do_reset = 0;
++ dwc_otg_core_params_t *params = dwc_otg_hcd->core_if->core_params;
++ dwc_otg_core_global_regs_t *global_regs = dwc_otg_hcd->core_if->core_global_regs;
++ dwc_otg_host_if_t *host_if = dwc_otg_hcd->core_if->host_if;
++
++ /* Check if we need to adjust the PHY clock speed for
++ * low power and adjust it */
++ if (params->host_support_fs_ls_low_power) {
++ gusbcfg_data_t usbcfg;
++
++ usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
++
++ if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED ||
++ hprt0.b.prtspd == DWC_HPRT0_PRTSPD_FULL_SPEED) {
++ /*
++ * Low power
++ */
++ hcfg_data_t hcfg;
++ if (usbcfg.b.phylpwrclksel == 0) {
++ /* Set PHY low power clock select for FS/LS devices */
++ usbcfg.b.phylpwrclksel = 1;
++ dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
++ do_reset = 1;
++ }
++
++ hcfg.d32 = dwc_read_reg32(&host_if->host_global_regs->hcfg);
++
++ if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED &&
++ params->host_ls_low_power_phy_clk ==
++ DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ) {
++ /* 6 MHZ */
++ DWC_DEBUGPL(DBG_CIL, "FS_PHY programming HCFG to 6 MHz (Low Power)\n");
++ if (hcfg.b.fslspclksel != DWC_HCFG_6_MHZ) {
++ hcfg.b.fslspclksel = DWC_HCFG_6_MHZ;
++ dwc_write_reg32(&host_if->host_global_regs->hcfg,
++ hcfg.d32);
++ do_reset = 1;
++ }
++ } else {
++ /* 48 MHZ */
++ DWC_DEBUGPL(DBG_CIL, "FS_PHY programming HCFG to 48 MHz ()\n");
++ if (hcfg.b.fslspclksel != DWC_HCFG_48_MHZ) {
++ hcfg.b.fslspclksel = DWC_HCFG_48_MHZ;
++ dwc_write_reg32(&host_if->host_global_regs->hcfg,
++ hcfg.d32);
++ do_reset = 1;
++ }
++ }
++ } else {
++ /*
++ * Not low power
++ */
++ if (usbcfg.b.phylpwrclksel == 1) {
++ usbcfg.b.phylpwrclksel = 0;
++ dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
++ do_reset = 1;
++ }
++ }
++
++ if (do_reset) {
++ tasklet_schedule(dwc_otg_hcd->reset_tasklet);
++ }
++ }
++
++ if (!do_reset) {
++ /* Port has been enabled set the reset change flag */
++ dwc_otg_hcd->flags.b.port_reset_change = 1;
++ }
++ } else {
++ dwc_otg_hcd->flags.b.port_enable_change = 1;
++ }
++ retval |= 1;
++ }
++
++ /** Overcurrent Change Interrupt */
++ if (hprt0.b.prtovrcurrchng) {
++ DWC_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT0=0x%08x "
++ "Port Overcurrent Changed--\n", hprt0.d32);
++ dwc_otg_hcd->flags.b.port_over_current_change = 1;
++ hprt0_modify.b.prtovrcurrchng = 1;
++ retval |= 1;
++ }
++
++ /* Clear Port Interrupts */
++ dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0_modify.d32);
++
++ return retval;
++}
++
++/** This interrupt indicates that one or more host channels has a pending
++ * interrupt. There are multiple conditions that can cause each host channel
++ * interrupt. This function determines which conditions have occurred for each
++ * host channel interrupt and handles them appropriately. */
++int32_t dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd_t *dwc_otg_hcd)
++{
++ int i;
++ int retval = 0;
++ haint_data_t haint;
++
++ /* Clear appropriate bits in HCINTn to clear the interrupt bit in
++ * GINTSTS */
++
++ haint.d32 = dwc_otg_read_host_all_channels_intr(dwc_otg_hcd->core_if);
++
++ for (i = 0; i < dwc_otg_hcd->core_if->core_params->host_channels; i++) {
++ if (haint.b2.chint & (1 << i)) {
++ retval |= dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd, i);
++ }
++ }
++
++ return retval;
++}
++
++/* Macro used to clear one channel interrupt */
++#define clear_hc_int(_hc_regs_, _intr_) \
++do { \
++ hcint_data_t hcint_clear = {.d32 = 0}; \
++ hcint_clear.b._intr_ = 1; \
++ dwc_write_reg32(&(_hc_regs_)->hcint, hcint_clear.d32); \
++} while (0)
++
++/*
++ * Macro used to disable one channel interrupt. Channel interrupts are
++ * disabled when the channel is halted or released by the interrupt handler.
++ * There is no need to handle further interrupts of that type until the
++ * channel is re-assigned. In fact, subsequent handling may cause crashes
++ * because the channel structures are cleaned up when the channel is released.
++ */
++#define disable_hc_int(_hc_regs_, _intr_) \
++do { \
++ hcintmsk_data_t hcintmsk = {.d32 = 0}; \
++ hcintmsk.b._intr_ = 1; \
++ dwc_modify_reg32(&(_hc_regs_)->hcintmsk, hcintmsk.d32, 0); \
++} while (0)
++
++/**
++ * Gets the actual length of a transfer after the transfer halts. _halt_status
++ * holds the reason for the halt.
++ *
++ * For IN transfers where halt_status is DWC_OTG_HC_XFER_COMPLETE,
++ * *short_read is set to 1 upon return if less than the requested
++ * number of bytes were transferred. Otherwise, *short_read is set to 0 upon
++ * return. short_read may also be NULL on entry, in which case it remains
++ * unchanged.
++ */
++static uint32_t get_actual_xfer_length(dwc_hc_t *hc,
++ dwc_otg_hc_regs_t *hc_regs,
++ dwc_otg_qtd_t *qtd,
++ dwc_otg_halt_status_e halt_status,
++ int *short_read)
++{
++ hctsiz_data_t hctsiz;
++ uint32_t length;
++
++ if (short_read != NULL) {
++ *short_read = 0;
++ }
++ hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
++
++ if (halt_status == DWC_OTG_HC_XFER_COMPLETE) {
++ if (hc->ep_is_in) {
++ length = hc->xfer_len - hctsiz.b.xfersize;
++ if (short_read != NULL) {
++ *short_read = (hctsiz.b.xfersize != 0);
++ }
++ } else if (hc->qh->do_split) {
++ length = qtd->ssplit_out_xfer_count;
++ } else {
++ length = hc->xfer_len;
++ }
++ } else {
++ /*
++ * Must use the hctsiz.pktcnt field to determine how much data
++ * has been transferred. This field reflects the number of
++ * packets that have been transferred via the USB. This is
++ * always an integral number of packets if the transfer was
++ * halted before its normal completion. (Can't use the
++ * hctsiz.xfersize field because that reflects the number of
++ * bytes transferred via the AHB, not the USB).
++ */
++ length = (hc->start_pkt_count - hctsiz.b.pktcnt) * hc->max_packet;
++ }
++
++ return length;
++}
++
++/**
++ * Updates the state of the URB after a Transfer Complete interrupt on the
++ * host channel. Updates the actual_length field of the URB based on the
++ * number of bytes transferred via the host channel. Sets the URB status
++ * if the data transfer is finished.
++ *
++ * @return 1 if the data transfer specified by the URB is completely finished,
++ * 0 otherwise.
++ */
++static int update_urb_state_xfer_comp(dwc_hc_t *hc,
++ dwc_otg_hc_regs_t *hc_regs,
++ struct urb *urb,
++ dwc_otg_qtd_t *qtd)
++{
++ int xfer_done = 0;
++ int short_read = 0;
++ int overflow_read=0;
++ uint32_t len = 0;
++ int max_packet;
++
++ len = get_actual_xfer_length(hc, hc_regs, qtd,
++ DWC_OTG_HC_XFER_COMPLETE,
++ &short_read);
++
++ /* Data overflow case: by Steven */
++ if (len > urb->transfer_buffer_length) {
++ len = urb->transfer_buffer_length;
++ overflow_read = 1;
++ }
++
++ /* non DWORD-aligned buffer case handling. */
++ if (((uint32_t)hc->xfer_buff & 0x3) && len && hc->qh->dw_align_buf && hc->ep_is_in) {
++ memcpy(urb->transfer_buffer + urb->actual_length, hc->qh->dw_align_buf, len);
++ }
++ urb->actual_length +=len;
++
++ max_packet = usb_maxpacket(urb->dev, urb->pipe, !usb_pipein(urb->pipe));
++ if((len) && usb_pipebulk(urb->pipe) &&
++ (urb->transfer_flags & URB_ZERO_PACKET) &&
++ (urb->actual_length == urb->transfer_buffer_length) &&
++ (!(urb->transfer_buffer_length % max_packet))) {
++ } else if (short_read || urb->actual_length == urb->transfer_buffer_length) {
++ xfer_done = 1;
++ if (short_read && (urb->transfer_flags & URB_SHORT_NOT_OK)) {
++ urb->status = -EREMOTEIO;
++ } else if (overflow_read) {
++ urb->status = -EOVERFLOW;
++ } else {
++ urb->status = 0;
++ }
++ }
++
++#ifdef DEBUG
++ {
++ hctsiz_data_t hctsiz;
++ hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
++ DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n",
++ __func__, (hc->ep_is_in ? "IN" : "OUT"), hc->hc_num);
++ DWC_DEBUGPL(DBG_HCDV, " hc->xfer_len %d\n", hc->xfer_len);
++ DWC_DEBUGPL(DBG_HCDV, " hctsiz.xfersize %d\n", hctsiz.b.xfersize);
++ DWC_DEBUGPL(DBG_HCDV, " urb->transfer_buffer_length %d\n",
++ urb->transfer_buffer_length);
++ DWC_DEBUGPL(DBG_HCDV, " urb->actual_length %d\n", urb->actual_length);
++ DWC_DEBUGPL(DBG_HCDV, " short_read %d, xfer_done %d\n",
++ short_read, xfer_done);
++ }
++#endif
++
++ return xfer_done;
++}
++
++/*
++ * Save the starting data toggle for the next transfer. The data toggle is
++ * saved in the QH for non-control transfers and it's saved in the QTD for
++ * control transfers.
++ */
++static void save_data_toggle(dwc_hc_t *hc,
++ dwc_otg_hc_regs_t *hc_regs,
++ dwc_otg_qtd_t *qtd)
++{
++ hctsiz_data_t hctsiz;
++ hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
++
++ if (hc->ep_type != DWC_OTG_EP_TYPE_CONTROL) {
++ dwc_otg_qh_t *qh = hc->qh;
++ if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) {
++ qh->data_toggle = DWC_OTG_HC_PID_DATA0;
++ } else {
++ qh->data_toggle = DWC_OTG_HC_PID_DATA1;
++ }
++ } else {
++ if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) {
++ qtd->data_toggle = DWC_OTG_HC_PID_DATA0;
++ } else {
++ qtd->data_toggle = DWC_OTG_HC_PID_DATA1;
++ }
++ }
++}
++
++/**
++ * Frees the first QTD in the QH's list if free_qtd is 1. For non-periodic
++ * QHs, removes the QH from the active non-periodic schedule. If any QTDs are
++ * still linked to the QH, the QH is added to the end of the inactive
++ * non-periodic schedule. For periodic QHs, removes the QH from the periodic
++ * schedule if no more QTDs are linked to the QH.
++ */
++static void deactivate_qh(dwc_otg_hcd_t *hcd,
++ dwc_otg_qh_t *qh,
++ int free_qtd)
++{
++ int continue_split = 0;
++ dwc_otg_qtd_t *qtd;
++
++ DWC_DEBUGPL(DBG_HCDV, " %s(%p,%p,%d)\n", __func__, hcd, qh, free_qtd);
++
++ qtd = list_entry(qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry);
++
++ if (qtd->complete_split) {
++ continue_split = 1;
++ } else if (qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_MID ||
++ qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_END) {
++ continue_split = 1;
++ }
++
++ if (free_qtd) {
++ dwc_otg_hcd_qtd_remove_and_free(hcd, qtd);
++ continue_split = 0;
++ }
++
++ qh->channel = NULL;
++ qh->qtd_in_process = NULL;
++ dwc_otg_hcd_qh_deactivate(hcd, qh, continue_split);
++}
++
++/**
++ * Updates the state of an Isochronous URB when the transfer is stopped for
++ * any reason. The fields of the current entry in the frame descriptor array
++ * are set based on the transfer state and the input _halt_status. Completes
++ * the Isochronous URB if all the URB frames have been completed.
++ *
++ * @return DWC_OTG_HC_XFER_COMPLETE if there are more frames remaining to be
++ * transferred in the URB. Otherwise return DWC_OTG_HC_XFER_URB_COMPLETE.
++ */
++static dwc_otg_halt_status_e
++update_isoc_urb_state(dwc_otg_hcd_t *hcd,
++ dwc_hc_t *hc,
++ dwc_otg_hc_regs_t *hc_regs,
++ dwc_otg_qtd_t *qtd,
++ dwc_otg_halt_status_e halt_status)
++{
++ struct urb *urb = qtd->urb;
++ dwc_otg_halt_status_e ret_val = halt_status;
++ struct usb_iso_packet_descriptor *frame_desc;
++
++ frame_desc = &urb->iso_frame_desc[qtd->isoc_frame_index];
++ switch (halt_status) {
++ case DWC_OTG_HC_XFER_COMPLETE:
++ frame_desc->status = 0;
++ frame_desc->actual_length =
++ get_actual_xfer_length(hc, hc_regs, qtd,
++ halt_status, NULL);
++
++ /* non DWORD-aligned buffer case handling. */
++ if (frame_desc->actual_length && ((uint32_t)hc->xfer_buff & 0x3) &&
++ hc->qh->dw_align_buf && hc->ep_is_in) {
++ memcpy(urb->transfer_buffer + frame_desc->offset + qtd->isoc_split_offset,
++ hc->qh->dw_align_buf, frame_desc->actual_length);
++
++ }
++
++ break;
++ case DWC_OTG_HC_XFER_FRAME_OVERRUN:
++ printk("DWC_OTG_HC_XFER_FRAME_OVERRUN: %d\n", halt_status);
++ urb->error_count++;
++ if (hc->ep_is_in) {
++ frame_desc->status = -ENOSR;
++ } else {
++ frame_desc->status = -ECOMM;
++ }
++ frame_desc->actual_length = 0;
++ break;
++ case DWC_OTG_HC_XFER_BABBLE_ERR:
++ printk("DWC_OTG_HC_XFER_BABBLE_ERR: %d\n", halt_status);
++ urb->error_count++;
++ frame_desc->status = -EOVERFLOW;
++ /* Don't need to update actual_length in this case. */
++ break;
++ case DWC_OTG_HC_XFER_XACT_ERR:
++ printk("DWC_OTG_HC_XFER_XACT_ERR: %d\n", halt_status);
++ urb->error_count++;
++ frame_desc->status = -EPROTO;
++ frame_desc->actual_length =
++ get_actual_xfer_length(hc, hc_regs, qtd,
++ halt_status, NULL);
++
++ /* non DWORD-aligned buffer case handling. */
++ if (frame_desc->actual_length && ((uint32_t)hc->xfer_buff & 0x3) &&
++ hc->qh->dw_align_buf && hc->ep_is_in) {
++ memcpy(urb->transfer_buffer + frame_desc->offset + qtd->isoc_split_offset,
++ hc->qh->dw_align_buf, frame_desc->actual_length);
++
++ }
++ break;
++ default:
++
++ DWC_ERROR("%s: Unhandled _halt_status (%d)\n", __func__,
++ halt_status);
++ BUG();
++ break;
++ }
++
++ if (++qtd->isoc_frame_index == urb->number_of_packets) {
++ /*
++ * urb->status is not used for isoc transfers.
++ * The individual frame_desc statuses are used instead.
++ */
++ dwc_otg_hcd_complete_urb(hcd, urb, 0);
++ ret_val = DWC_OTG_HC_XFER_URB_COMPLETE;
++ } else {
++ ret_val = DWC_OTG_HC_XFER_COMPLETE;
++ }
++
++ return ret_val;
++}
++
++/**
++ * Releases a host channel for use by other transfers. Attempts to select and
++ * queue more transactions since at least one host channel is available.
++ *
++ * @param hcd The HCD state structure.
++ * @param hc The host channel to release.
++ * @param qtd The QTD associated with the host channel. This QTD may be freed
++ * if the transfer is complete or an error has occurred.
++ * @param halt_status Reason the channel is being released. This status
++ * determines the actions taken by this function.
++ */
++static void release_channel(dwc_otg_hcd_t *hcd,
++ dwc_hc_t *hc,
++ dwc_otg_qtd_t *qtd,
++ dwc_otg_halt_status_e halt_status)
++{
++ dwc_otg_transaction_type_e tr_type;
++ int free_qtd;
++
++ DWC_DEBUGPL(DBG_HCDV, " %s: channel %d, halt_status %d\n",
++ __func__, hc->hc_num, halt_status);
++
++ switch (halt_status) {
++ case DWC_OTG_HC_XFER_URB_COMPLETE:
++ free_qtd = 1;
++ break;
++ case DWC_OTG_HC_XFER_AHB_ERR:
++ case DWC_OTG_HC_XFER_STALL:
++ case DWC_OTG_HC_XFER_BABBLE_ERR:
++ free_qtd = 1;
++ break;
++ case DWC_OTG_HC_XFER_XACT_ERR:
++ if (qtd->error_count >= 3) {
++ DWC_DEBUGPL(DBG_HCDV, " Complete URB with transaction error\n");
++ free_qtd = 1;
++ qtd->urb->status = -EPROTO;
++ dwc_otg_hcd_complete_urb(hcd, qtd->urb, -EPROTO);
++ } else {
++ free_qtd = 0;
++ }
++ break;
++ case DWC_OTG_HC_XFER_URB_DEQUEUE:
++ /*
++ * The QTD has already been removed and the QH has been
++ * deactivated. Don't want to do anything except release the
++ * host channel and try to queue more transfers.
++ */
++ goto cleanup;
++ case DWC_OTG_HC_XFER_NO_HALT_STATUS:
++ DWC_ERROR("%s: No halt_status, channel %d\n", __func__, hc->hc_num);
++ free_qtd = 0;
++ break;
++ default:
++ free_qtd = 0;
++ break;
++ }
++
++ deactivate_qh(hcd, hc->qh, free_qtd);
++
++ cleanup:
++ /*
++ * Release the host channel for use by other transfers. The cleanup
++ * function clears the channel interrupt enables and conditions, so
++ * there's no need to clear the Channel Halted interrupt separately.
++ */
++ dwc_otg_hc_cleanup(hcd->core_if, hc);
++ list_add_tail(&hc->hc_list_entry, &hcd->free_hc_list);
++
++ switch (hc->ep_type) {
++ case DWC_OTG_EP_TYPE_CONTROL:
++ case DWC_OTG_EP_TYPE_BULK:
++ hcd->non_periodic_channels--;
++ break;
++
++ default:
++ /*
++ * Don't release reservations for periodic channels here.
++ * That's done when a periodic transfer is descheduled (i.e.
++ * when the QH is removed from the periodic schedule).
++ */
++ break;
++ }
++
++ /* Try to queue more transfers now that there's a free channel. */
++ tr_type = dwc_otg_hcd_select_transactions(hcd);
++ if (tr_type != DWC_OTG_TRANSACTION_NONE) {
++ dwc_otg_hcd_queue_transactions(hcd, tr_type);
++ }
++}
++
++/**
++ * Halts a host channel. If the channel cannot be halted immediately because
++ * the request queue is full, this function ensures that the FIFO empty
++ * interrupt for the appropriate queue is enabled so that the halt request can
++ * be queued when there is space in the request queue.
++ *
++ * This function may also be called in DMA mode. In that case, the channel is
++ * simply released since the core always halts the channel automatically in
++ * DMA mode.
++ */
++static void halt_channel(dwc_otg_hcd_t *hcd,
++ dwc_hc_t *hc,
++ dwc_otg_qtd_t *qtd,
++ dwc_otg_halt_status_e halt_status)
++{
++ if (hcd->core_if->dma_enable) {
++ release_channel(hcd, hc, qtd, halt_status);
++ return;
++ }
++
++ /* Slave mode processing... */
++ dwc_otg_hc_halt(hcd->core_if, hc, halt_status);
++
++ if (hc->halt_on_queue) {
++ gintmsk_data_t gintmsk = {.d32 = 0};
++ dwc_otg_core_global_regs_t *global_regs;
++ global_regs = hcd->core_if->core_global_regs;
++
++ if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL ||
++ hc->ep_type == DWC_OTG_EP_TYPE_BULK) {
++ /*
++ * Make sure the Non-periodic Tx FIFO empty interrupt
++ * is enabled so that the non-periodic schedule will
++ * be processed.
++ */
++ gintmsk.b.nptxfempty = 1;
++ dwc_modify_reg32(&global_regs->gintmsk, 0, gintmsk.d32);
++ } else {
++ /*
++ * Move the QH from the periodic queued schedule to
++ * the periodic assigned schedule. This allows the
++ * halt to be queued when the periodic schedule is
++ * processed.
++ */
++ list_move(&hc->qh->qh_list_entry,
++ &hcd->periodic_sched_assigned);
++
++ /*
++ * Make sure the Periodic Tx FIFO Empty interrupt is
++ * enabled so that the periodic schedule will be
++ * processed.
++ */
++ gintmsk.b.ptxfempty = 1;
++ dwc_modify_reg32(&global_regs->gintmsk, 0, gintmsk.d32);
++ }
++ }
++}
++
++/**
++ * Performs common cleanup for non-periodic transfers after a Transfer
++ * Complete interrupt. This function should be called after any endpoint type
++ * specific handling is finished to release the host channel.
++ */
++static void complete_non_periodic_xfer(dwc_otg_hcd_t *hcd,
++ dwc_hc_t *hc,
++ dwc_otg_hc_regs_t *hc_regs,
++ dwc_otg_qtd_t *qtd,
++ dwc_otg_halt_status_e halt_status)
++{
++ hcint_data_t hcint;
++
++ qtd->error_count = 0;
++
++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++ if (hcint.b.nyet) {
++ /*
++ * Got a NYET on the last transaction of the transfer. This
++ * means that the endpoint should be in the PING state at the
++ * beginning of the next transfer.
++ */
++ hc->qh->ping_state = 1;
++ clear_hc_int(hc_regs, nyet);
++ }
++
++ /*
++ * Always halt and release the host channel to make it available for
++ * more transfers. There may still be more phases for a control
++ * transfer or more data packets for a bulk transfer at this point,
++ * but the host channel is still halted. A channel will be reassigned
++ * to the transfer when the non-periodic schedule is processed after
++ * the channel is released. This allows transactions to be queued
++ * properly via dwc_otg_hcd_queue_transactions, which also enables the
++ * Tx FIFO Empty interrupt if necessary.
++ */
++ if (hc->ep_is_in) {
++ /*
++ * IN transfers in Slave mode require an explicit disable to
++ * halt the channel. (In DMA mode, this call simply releases
++ * the channel.)
++ */
++ halt_channel(hcd, hc, qtd, halt_status);
++ } else {
++ /*
++ * The channel is automatically disabled by the core for OUT
++ * transfers in Slave mode.
++ */
++ release_channel(hcd, hc, qtd, halt_status);
++ }
++}
++
++/**
++ * Performs common cleanup for periodic transfers after a Transfer Complete
++ * interrupt. This function should be called after any endpoint type specific
++ * handling is finished to release the host channel.
++ */
++static void complete_periodic_xfer(dwc_otg_hcd_t *hcd,
++ dwc_hc_t *hc,
++ dwc_otg_hc_regs_t *hc_regs,
++ dwc_otg_qtd_t *qtd,
++ dwc_otg_halt_status_e halt_status)
++{
++ hctsiz_data_t hctsiz;
++ qtd->error_count = 0;
++
++ hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
++ if (!hc->ep_is_in || hctsiz.b.pktcnt == 0) {
++ /* Core halts channel in these cases. */
++ release_channel(hcd, hc, qtd, halt_status);
++ } else {
++ /* Flush any outstanding requests from the Tx queue. */
++ halt_channel(hcd, hc, qtd, halt_status);
++ }
++}
++
++/**
++ * Handles a host channel Transfer Complete interrupt. This handler may be
++ * called in either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_xfercomp_intr(dwc_otg_hcd_t *hcd,
++ dwc_hc_t *hc,
++ dwc_otg_hc_regs_t *hc_regs,
++ dwc_otg_qtd_t *qtd)
++{
++ int urb_xfer_done;
++ dwc_otg_halt_status_e halt_status = DWC_OTG_HC_XFER_COMPLETE;
++ struct urb *urb = qtd->urb;
++ int pipe_type = usb_pipetype(urb->pipe);
++
++ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++ "Transfer Complete--\n", hc->hc_num);
++
++ /*
++ * Handle xfer complete on CSPLIT.
++ */
++ if (hc->qh->do_split) {
++ qtd->complete_split = 0;
++ }
++
++ /* Update the QTD and URB states. */
++ switch (pipe_type) {
++ case PIPE_CONTROL:
++ switch (qtd->control_phase) {
++ case DWC_OTG_CONTROL_SETUP:
++ if (urb->transfer_buffer_length > 0) {
++ qtd->control_phase = DWC_OTG_CONTROL_DATA;
++ } else {
++ qtd->control_phase = DWC_OTG_CONTROL_STATUS;
++ }
++ DWC_DEBUGPL(DBG_HCDV, " Control setup transaction done\n");
++ halt_status = DWC_OTG_HC_XFER_COMPLETE;
++ break;
++ case DWC_OTG_CONTROL_DATA: {
++ urb_xfer_done = update_urb_state_xfer_comp(hc, hc_regs, urb, qtd);
++ if (urb_xfer_done) {
++ qtd->control_phase = DWC_OTG_CONTROL_STATUS;
++ DWC_DEBUGPL(DBG_HCDV, " Control data transfer done\n");
++ } else {
++ save_data_toggle(hc, hc_regs, qtd);
++ }
++ halt_status = DWC_OTG_HC_XFER_COMPLETE;
++ break;
++ }
++ case DWC_OTG_CONTROL_STATUS:
++ DWC_DEBUGPL(DBG_HCDV, " Control transfer complete\n");
++ if (urb->status == -EINPROGRESS) {
++ urb->status = 0;
++ }
++ dwc_otg_hcd_complete_urb(hcd, urb, urb->status);
++ halt_status = DWC_OTG_HC_XFER_URB_COMPLETE;
++ break;
++ }
++
++ complete_non_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status);
++ break;
++ case PIPE_BULK:
++ DWC_DEBUGPL(DBG_HCDV, " Bulk transfer complete\n");
++ urb_xfer_done = update_urb_state_xfer_comp(hc, hc_regs, urb, qtd);
++ if (urb_xfer_done) {
++ dwc_otg_hcd_complete_urb(hcd, urb, urb->status);
++ halt_status = DWC_OTG_HC_XFER_URB_COMPLETE;
++ } else {
++ halt_status = DWC_OTG_HC_XFER_COMPLETE;
++ }
++
++ save_data_toggle(hc, hc_regs, qtd);
++ complete_non_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status);
++ break;
++ case PIPE_INTERRUPT:
++ DWC_DEBUGPL(DBG_HCDV, " Interrupt transfer complete\n");
++ update_urb_state_xfer_comp(hc, hc_regs, urb, qtd);
++
++ /*
++ * Interrupt URB is done on the first transfer complete
++ * interrupt.
++ */
++ dwc_otg_hcd_complete_urb(hcd, urb, urb->status);
++ save_data_toggle(hc, hc_regs, qtd);
++ complete_periodic_xfer(hcd, hc, hc_regs, qtd,
++ DWC_OTG_HC_XFER_URB_COMPLETE);
++ break;
++ case PIPE_ISOCHRONOUS:
++ DWC_DEBUGPL(DBG_HCDV, " Isochronous transfer complete\n");
++ if (qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_ALL) {
++ halt_status = update_isoc_urb_state(hcd, hc, hc_regs, qtd,
++ DWC_OTG_HC_XFER_COMPLETE);
++ }
++ complete_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status);
++ break;
++ }
++
++ disable_hc_int(hc_regs, xfercompl);
++
++ return 1;
++}
++
++/**
++ * Handles a host channel STALL interrupt. This handler may be called in
++ * either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_stall_intr(dwc_otg_hcd_t *hcd,
++ dwc_hc_t *hc,
++ dwc_otg_hc_regs_t *hc_regs,
++ dwc_otg_qtd_t *qtd)
++{
++ struct urb *urb = qtd->urb;
++ int pipe_type = usb_pipetype(urb->pipe);
++
++ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++ "STALL Received--\n", hc->hc_num);
++
++ if (pipe_type == PIPE_CONTROL) {
++ dwc_otg_hcd_complete_urb(hcd, urb, -EPIPE);
++ }
++
++ if (pipe_type == PIPE_BULK || pipe_type == PIPE_INTERRUPT) {
++ dwc_otg_hcd_complete_urb(hcd, urb, -EPIPE);
++ /*
++ * USB protocol requires resetting the data toggle for bulk
++ * and interrupt endpoints when a CLEAR_FEATURE(ENDPOINT_HALT)
++ * setup command is issued to the endpoint. Anticipate the
++ * CLEAR_FEATURE command since a STALL has occurred and reset
++ * the data toggle now.
++ */
++ hc->qh->data_toggle = 0;
++ }
++
++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_STALL);
++
++ disable_hc_int(hc_regs, stall);
++
++ return 1;
++}
++
++/*
++ * Updates the state of the URB when a transfer has been stopped due to an
++ * abnormal condition before the transfer completes. Modifies the
++ * actual_length field of the URB to reflect the number of bytes that have
++ * actually been transferred via the host channel.
++ */
++static void update_urb_state_xfer_intr(dwc_hc_t *hc,
++ dwc_otg_hc_regs_t *hc_regs,
++ struct urb *urb,
++ dwc_otg_qtd_t *qtd,
++ dwc_otg_halt_status_e halt_status)
++{
++ uint32_t bytes_transferred = get_actual_xfer_length(hc, hc_regs, qtd,
++ halt_status, NULL);
++ urb->actual_length += bytes_transferred;
++
++#ifdef DEBUG
++ {
++ hctsiz_data_t hctsiz;
++ hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
++ DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n",
++ __func__, (hc->ep_is_in ? "IN" : "OUT"), hc->hc_num);
++ DWC_DEBUGPL(DBG_HCDV, " hc->start_pkt_count %d\n", hc->start_pkt_count);
++ DWC_DEBUGPL(DBG_HCDV, " hctsiz.pktcnt %d\n", hctsiz.b.pktcnt);
++ DWC_DEBUGPL(DBG_HCDV, " hc->max_packet %d\n", hc->max_packet);
++ DWC_DEBUGPL(DBG_HCDV, " bytes_transferred %d\n", bytes_transferred);
++ DWC_DEBUGPL(DBG_HCDV, " urb->actual_length %d\n", urb->actual_length);
++ DWC_DEBUGPL(DBG_HCDV, " urb->transfer_buffer_length %d\n",
++ urb->transfer_buffer_length);
++ }
++#endif
++}
++
++/**
++ * Handles a host channel NAK interrupt. This handler may be called in either
++ * DMA mode or Slave mode.
++ */
++static int32_t handle_hc_nak_intr(dwc_otg_hcd_t *hcd,
++ dwc_hc_t *hc,
++ dwc_otg_hc_regs_t *hc_regs,
++ dwc_otg_qtd_t *qtd)
++{
++ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++ "NAK Received--\n", hc->hc_num);
++
++ /*
++ * Handle NAK for IN/OUT SSPLIT/CSPLIT transfers, bulk, control, and
++ * interrupt. Re-start the SSPLIT transfer.
++ */
++ if (hc->do_split) {
++ if (hc->complete_split) {
++ qtd->error_count = 0;
++ }
++ qtd->complete_split = 0;
++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK);
++ goto handle_nak_done;
++ }
++
++ switch (usb_pipetype(qtd->urb->pipe)) {
++ case PIPE_CONTROL:
++ case PIPE_BULK:
++ if (hcd->core_if->dma_enable && hc->ep_is_in) {
++ /*
++ * NAK interrupts are enabled on bulk/control IN
++ * transfers in DMA mode for the sole purpose of
++ * resetting the error count after a transaction error
++ * occurs. The core will continue transferring data.
++ */
++ qtd->error_count = 0;
++ goto handle_nak_done;
++ }
++
++ /*
++ * NAK interrupts normally occur during OUT transfers in DMA
++ * or Slave mode. For IN transfers, more requests will be
++ * queued as request queue space is available.
++ */
++ qtd->error_count = 0;
++
++ if (!hc->qh->ping_state) {
++ update_urb_state_xfer_intr(hc, hc_regs, qtd->urb,
++ qtd, DWC_OTG_HC_XFER_NAK);
++ save_data_toggle(hc, hc_regs, qtd);
++ if (qtd->urb->dev->speed == USB_SPEED_HIGH) {
++ hc->qh->ping_state = 1;
++ }
++ }
++
++ /*
++ * Halt the channel so the transfer can be re-started from
++ * the appropriate point or the PING protocol will
++ * start/continue.
++ */
++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK);
++ break;
++ case PIPE_INTERRUPT:
++ qtd->error_count = 0;
++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK);
++ break;
++ case PIPE_ISOCHRONOUS:
++ /* Should never get called for isochronous transfers. */
++ BUG();
++ break;
++ }
++
++ handle_nak_done:
++ disable_hc_int(hc_regs, nak);
++
++ return 1;
++}
++
++/**
++ * Handles a host channel ACK interrupt. This interrupt is enabled when
++ * performing the PING protocol in Slave mode, when errors occur during
++ * either Slave mode or DMA mode, and during Start Split transactions.
++ */
++static int32_t handle_hc_ack_intr(dwc_otg_hcd_t *hcd,
++ dwc_hc_t *hc,
++ dwc_otg_hc_regs_t *hc_regs,
++ dwc_otg_qtd_t *qtd)
++{
++ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++ "ACK Received--\n", hc->hc_num);
++
++ if (hc->do_split) {
++ /*
++ * Handle ACK on SSPLIT.
++ * ACK should not occur in CSPLIT.
++ */
++ if (!hc->ep_is_in && hc->data_pid_start != DWC_OTG_HC_PID_SETUP) {
++ qtd->ssplit_out_xfer_count = hc->xfer_len;
++ }
++ if (!(hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in)) {
++ /* Don't need complete for isochronous out transfers. */
++ qtd->complete_split = 1;
++ }
++
++ /* ISOC OUT */
++ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in) {
++ switch (hc->xact_pos) {
++ case DWC_HCSPLIT_XACTPOS_ALL:
++ break;
++ case DWC_HCSPLIT_XACTPOS_END:
++ qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL;
++ qtd->isoc_split_offset = 0;
++ break;
++ case DWC_HCSPLIT_XACTPOS_BEGIN:
++ case DWC_HCSPLIT_XACTPOS_MID:
++ /*
++ * For BEGIN or MID, calculate the length for
++ * the next microframe to determine the correct
++ * SSPLIT token, either MID or END.
++ */
++ {
++ struct usb_iso_packet_descriptor *frame_desc;
++
++ frame_desc = &qtd->urb->iso_frame_desc[qtd->isoc_frame_index];
++ qtd->isoc_split_offset += 188;
++
++ if ((frame_desc->length - qtd->isoc_split_offset) <= 188) {
++ qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_END;
++ } else {
++ qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_MID;
++ }
++
++ }
++ break;
++ }
++ } else {
++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_ACK);
++ }
++ } else {
++ qtd->error_count = 0;
++
++ if (hc->qh->ping_state) {
++ hc->qh->ping_state = 0;
++ /*
++ * Halt the channel so the transfer can be re-started
++ * from the appropriate point. This only happens in
++ * Slave mode. In DMA mode, the ping_state is cleared
++ * when the transfer is started because the core
++ * automatically executes the PING, then the transfer.
++ */
++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_ACK);
++ }
++ }
++
++ /*
++ * If the ACK occurred when _not_ in the PING state, let the channel
++ * continue transferring data after clearing the error count.
++ */
++
++ disable_hc_int(hc_regs, ack);
++
++ return 1;
++}
++
++/**
++ * Handles a host channel NYET interrupt. This interrupt should only occur on
++ * Bulk and Control OUT endpoints and for complete split transactions. If a
++ * NYET occurs at the same time as a Transfer Complete interrupt, it is
++ * handled in the xfercomp interrupt handler, not here. This handler may be
++ * called in either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_nyet_intr(dwc_otg_hcd_t *hcd,
++ dwc_hc_t *hc,
++ dwc_otg_hc_regs_t *hc_regs,
++ dwc_otg_qtd_t *qtd)
++{
++ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++ "NYET Received--\n", hc->hc_num);
++
++ /*
++ * NYET on CSPLIT
++ * re-do the CSPLIT immediately on non-periodic
++ */
++ if (hc->do_split && hc->complete_split) {
++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++ int frnum = dwc_otg_hcd_get_frame_number(dwc_otg_hcd_to_hcd(hcd));
++
++ if (dwc_full_frame_num(frnum) !=
++ dwc_full_frame_num(hc->qh->sched_frame)) {
++ /*
++ * No longer in the same full speed frame.
++ * Treat this as a transaction error.
++ */
++#if 0
++ /** @todo Fix system performance so this can
++ * be treated as an error. Right now complete
++ * splits cannot be scheduled precisely enough
++ * due to other system activity, so this error
++ * occurs regularly in Slave mode.
++ */
++ qtd->error_count++;
++#endif
++ qtd->complete_split = 0;
++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR);
++ /** @todo add support for isoc release */
++ goto handle_nyet_done;
++ }
++ }
++
++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NYET);
++ goto handle_nyet_done;
++ }
++
++ hc->qh->ping_state = 1;
++ qtd->error_count = 0;
++
++ update_urb_state_xfer_intr(hc, hc_regs, qtd->urb, qtd,
++ DWC_OTG_HC_XFER_NYET);
++ save_data_toggle(hc, hc_regs, qtd);
++
++ /*
++ * Halt the channel and re-start the transfer so the PING
++ * protocol will start.
++ */
++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NYET);
++
++handle_nyet_done:
++ disable_hc_int(hc_regs, nyet);
++ return 1;
++}
++
++/**
++ * Handles a host channel babble interrupt. This handler may be called in
++ * either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_babble_intr(dwc_otg_hcd_t *hcd,
++ dwc_hc_t *hc,
++ dwc_otg_hc_regs_t *hc_regs,
++ dwc_otg_qtd_t *qtd)
++{
++ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++ "Babble Error--\n", hc->hc_num);
++ if (hc->ep_type != DWC_OTG_EP_TYPE_ISOC) {
++ dwc_otg_hcd_complete_urb(hcd, qtd->urb, -EOVERFLOW);
++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_BABBLE_ERR);
++ } else {
++ dwc_otg_halt_status_e halt_status;
++ halt_status = update_isoc_urb_state(hcd, hc, hc_regs, qtd,
++ DWC_OTG_HC_XFER_BABBLE_ERR);
++ halt_channel(hcd, hc, qtd, halt_status);
++ }
++ disable_hc_int(hc_regs, bblerr);
++ return 1;
++}
++
++/**
++ * Handles a host channel AHB error interrupt. This handler is only called in
++ * DMA mode.
++ */
++static int32_t handle_hc_ahberr_intr(dwc_otg_hcd_t *hcd,
++ dwc_hc_t *hc,
++ dwc_otg_hc_regs_t *hc_regs,
++ dwc_otg_qtd_t *qtd)
++{
++ hcchar_data_t hcchar;
++ hcsplt_data_t hcsplt;
++ hctsiz_data_t hctsiz;
++ uint32_t hcdma;
++ struct urb *urb = qtd->urb;
++
++ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++ "AHB Error--\n", hc->hc_num);
++
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ hcsplt.d32 = dwc_read_reg32(&hc_regs->hcsplt);
++ hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
++ hcdma = dwc_read_reg32(&hc_regs->hcdma);
++
++ DWC_ERROR("AHB ERROR, Channel %d\n", hc->hc_num);
++ DWC_ERROR(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32);
++ DWC_ERROR(" hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma);
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Enqueue\n");
++ DWC_ERROR(" Device address: %d\n", usb_pipedevice(urb->pipe));
++ DWC_ERROR(" Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe),
++ (usb_pipein(urb->pipe) ? "IN" : "OUT"));
++ DWC_ERROR(" Endpoint type: %s\n",
++ ({char *pipetype;
++ switch (usb_pipetype(urb->pipe)) {
++ case PIPE_CONTROL: pipetype = "CONTROL"; break;
++ case PIPE_BULK: pipetype = "BULK"; break;
++ case PIPE_INTERRUPT: pipetype = "INTERRUPT"; break;
++ case PIPE_ISOCHRONOUS: pipetype = "ISOCHRONOUS"; break;
++ default: pipetype = "UNKNOWN"; break;
++ }; pipetype;}));
++ DWC_ERROR(" Speed: %s\n",
++ ({char *speed;
++ switch (urb->dev->speed) {
++ case USB_SPEED_HIGH: speed = "HIGH"; break;
++ case USB_SPEED_FULL: speed = "FULL"; break;
++ case USB_SPEED_LOW: speed = "LOW"; break;
++ default: speed = "UNKNOWN"; break;
++ }; speed;}));
++ DWC_ERROR(" Max packet size: %d\n",
++ usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
++ DWC_ERROR(" Data buffer length: %d\n", urb->transfer_buffer_length);
++ DWC_ERROR(" Transfer buffer: %p, Transfer DMA: %p\n",
++ urb->transfer_buffer, (void *)urb->transfer_dma);
++ DWC_ERROR(" Setup buffer: %p, Setup DMA: %p\n",
++ urb->setup_packet, (void *)urb->setup_dma);
++ DWC_ERROR(" Interval: %d\n", urb->interval);
++
++ dwc_otg_hcd_complete_urb(hcd, urb, -EIO);
++
++ /*
++ * Force a channel halt. Don't call halt_channel because that won't
++ * write to the HCCHARn register in DMA mode to force the halt.
++ */
++ dwc_otg_hc_halt(hcd->core_if, hc, DWC_OTG_HC_XFER_AHB_ERR);
++
++ disable_hc_int(hc_regs, ahberr);
++ return 1;
++}
++
++/**
++ * Handles a host channel transaction error interrupt. This handler may be
++ * called in either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_xacterr_intr(dwc_otg_hcd_t *hcd,
++ dwc_hc_t *hc,
++ dwc_otg_hc_regs_t *hc_regs,
++ dwc_otg_qtd_t *qtd)
++{
++ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++ "Transaction Error--\n", hc->hc_num);
++
++ switch (usb_pipetype(qtd->urb->pipe)) {
++ case PIPE_CONTROL:
++ case PIPE_BULK:
++ qtd->error_count++;
++ if (!hc->qh->ping_state) {
++ update_urb_state_xfer_intr(hc, hc_regs, qtd->urb,
++ qtd, DWC_OTG_HC_XFER_XACT_ERR);
++ save_data_toggle(hc, hc_regs, qtd);
++ if (!hc->ep_is_in && qtd->urb->dev->speed == USB_SPEED_HIGH) {
++ hc->qh->ping_state = 1;
++ }
++ }
++
++ /*
++ * Halt the channel so the transfer can be re-started from
++ * the appropriate point or the PING protocol will start.
++ */
++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR);
++ break;
++ case PIPE_INTERRUPT:
++ qtd->error_count++;
++ if (hc->do_split && hc->complete_split) {
++ qtd->complete_split = 0;
++ }
++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR);
++ break;
++ case PIPE_ISOCHRONOUS:
++ {
++ dwc_otg_halt_status_e halt_status;
++ halt_status = update_isoc_urb_state(hcd, hc, hc_regs, qtd,
++ DWC_OTG_HC_XFER_XACT_ERR);
++
++ halt_channel(hcd, hc, qtd, halt_status);
++ }
++ break;
++ }
++
++ disable_hc_int(hc_regs, xacterr);
++
++ return 1;
++}
++
++/**
++ * Handles a host channel frame overrun interrupt. This handler may be called
++ * in either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_frmovrun_intr(dwc_otg_hcd_t *hcd,
++ dwc_hc_t *hc,
++ dwc_otg_hc_regs_t *hc_regs,
++ dwc_otg_qtd_t *qtd)
++{
++ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++ "Frame Overrun--\n", hc->hc_num);
++
++ switch (usb_pipetype(qtd->urb->pipe)) {
++ case PIPE_CONTROL:
++ case PIPE_BULK:
++ break;
++ case PIPE_INTERRUPT:
++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_FRAME_OVERRUN);
++ break;
++ case PIPE_ISOCHRONOUS:
++ {
++ dwc_otg_halt_status_e halt_status;
++ halt_status = update_isoc_urb_state(hcd, hc, hc_regs, qtd,
++ DWC_OTG_HC_XFER_FRAME_OVERRUN);
++
++ halt_channel(hcd, hc, qtd, halt_status);
++ }
++ break;
++ }
++
++ disable_hc_int(hc_regs, frmovrun);
++
++ return 1;
++}
++
++/**
++ * Handles a host channel data toggle error interrupt. This handler may be
++ * called in either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_datatglerr_intr(dwc_otg_hcd_t *hcd,
++ dwc_hc_t *hc,
++ dwc_otg_hc_regs_t *hc_regs,
++ dwc_otg_qtd_t *qtd)
++{
++ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++ "Data Toggle Error--\n", hc->hc_num);
++
++ if (hc->ep_is_in) {
++ qtd->error_count = 0;
++ } else {
++ DWC_ERROR("Data Toggle Error on OUT transfer,"
++ "channel %d\n", hc->hc_num);
++ }
++
++ disable_hc_int(hc_regs, datatglerr);
++
++ return 1;
++}
++
++#ifdef DEBUG
++/**
++ * This function is for debug only. It checks that a valid halt status is set
++ * and that HCCHARn.chdis is clear. If there's a problem, corrective action is
++ * taken and a warning is issued.
++ * @return 1 if halt status is ok, 0 otherwise.
++ */
++static inline int halt_status_ok(dwc_otg_hcd_t *hcd,
++ dwc_hc_t *hc,
++ dwc_otg_hc_regs_t *hc_regs,
++ dwc_otg_qtd_t *qtd)
++{
++ hcchar_data_t hcchar;
++ hctsiz_data_t hctsiz;
++ hcint_data_t hcint;
++ hcintmsk_data_t hcintmsk;
++ hcsplt_data_t hcsplt;
++
++ if (hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS) {
++ /*
++ * This code is here only as a check. This condition should
++ * never happen. Ignore the halt if it does occur.
++ */
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++ hcintmsk.d32 = dwc_read_reg32(&hc_regs->hcintmsk);
++ hcsplt.d32 = dwc_read_reg32(&hc_regs->hcsplt);
++ DWC_WARN("%s: hc->halt_status == DWC_OTG"
++ "channel %d, hcchar 0x%08x, hctsiz 0x%08x, "
++ "hcint 0x%08x, hcintmsk 0x%08x, "
++ "hcsplt 0x%08x, qtd->complete_split %d\n",
++ __func__, hc->hc_num, hcchar.d32, hctsiz.d32,
++ hcint.d32, hcintmsk.d32,
++ hcsplt.d32, qtd->complete_split);
++
++ DWC_WARN("%s: no halt status, channel %d, ignoring interrupt\n",
++ __func__, hc->hc_num);
++ DWC_WARN("\n");
++ clear_hc_int(hc_regs, chhltd);
++ return 0;
++ }
++
++ /*
++ * This code is here only as a check. hcchar.chdis should
++ * never be set when the halt interrupt occurs. Halt the
++ * channel again if it does occur.
++ */
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ if (hcchar.b.chdis) {
++ DWC_WARN("%s: hcchar.chdis set unexpectedly, "
++ "hcchar 0x%08x, trying to halt again\n",
++ __func__, hcchar.d32);
++ clear_hc_int(hc_regs, chhltd);
++ hc->halt_pending = 0;
++ halt_channel(hcd, hc, qtd, hc->halt_status);
++ return 0;
++ }
++
++ return 1;
++}
++#endif
++
++/**
++ * Handles a host Channel Halted interrupt in DMA mode. This handler
++ * determines the reason the channel halted and proceeds accordingly.
++ */
++static void handle_hc_chhltd_intr_dma(dwc_otg_hcd_t *hcd,
++ dwc_hc_t *hc,
++ dwc_otg_hc_regs_t *hc_regs,
++ dwc_otg_qtd_t *qtd)
++{
++ hcint_data_t hcint;
++ hcintmsk_data_t hcintmsk;
++ int out_nak_enh = 0;
++
++ /* For core with OUT NAK enhancement, the flow for high-
++ * speed CONTROL/BULK OUT is handled a little differently.
++ */
++ if (hcd->core_if->snpsid >= 0x4F54271A) {
++ if (hc->speed == DWC_OTG_EP_SPEED_HIGH && !hc->ep_is_in &&
++ (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL ||
++ hc->ep_type == DWC_OTG_EP_TYPE_BULK)) {
++ printk(KERN_DEBUG "OUT NAK enhancement enabled\n");
++ out_nak_enh = 1;
++ } else {
++ printk(KERN_DEBUG "OUT NAK enhancement disabled, not HS Ctrl/Bulk OUT EP\n");
++ }
++ } else {
++// printk(KERN_DEBUG "OUT NAK enhancement disabled, no core support\n");
++ }
++
++ if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE ||
++ hc->halt_status == DWC_OTG_HC_XFER_AHB_ERR) {
++ /*
++ * Just release the channel. A dequeue can happen on a
++ * transfer timeout. In the case of an AHB Error, the channel
++ * was forced to halt because there's no way to gracefully
++ * recover.
++ */
++ release_channel(hcd, hc, qtd, hc->halt_status);
++ return;
++ }
++
++ /* Read the HCINTn register to determine the cause for the halt. */
++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++ hcintmsk.d32 = dwc_read_reg32(&hc_regs->hcintmsk);
++
++ if (hcint.b.xfercomp) {
++ /** @todo This is here because of a possible hardware bug. Spec
++ * says that on SPLIT-ISOC OUT transfers in DMA mode that a HALT
++ * interrupt w/ACK bit set should occur, but I only see the
++ * XFERCOMP bit, even with it masked out. This is a workaround
++ * for that behavior. Should fix this when hardware is fixed.
++ */
++ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in) {
++ handle_hc_ack_intr(hcd, hc, hc_regs, qtd);
++ }
++ handle_hc_xfercomp_intr(hcd, hc, hc_regs, qtd);
++ } else if (hcint.b.stall) {
++ handle_hc_stall_intr(hcd, hc, hc_regs, qtd);
++ } else if (hcint.b.xacterr) {
++ if (out_nak_enh) {
++ if (hcint.b.nyet || hcint.b.nak || hcint.b.ack) {
++ printk(KERN_DEBUG "XactErr with NYET/NAK/ACK\n");
++ qtd->error_count = 0;
++ } else {
++ printk(KERN_DEBUG "XactErr without NYET/NAK/ACK\n");
++ }
++ }
++
++ /*
++ * Must handle xacterr before nak or ack. Could get a xacterr
++ * at the same time as either of these on a BULK/CONTROL OUT
++ * that started with a PING. The xacterr takes precedence.
++ */
++ handle_hc_xacterr_intr(hcd, hc, hc_regs, qtd);
++ } else if (!out_nak_enh) {
++ if (hcint.b.nyet) {
++ /*
++ * Must handle nyet before nak or ack. Could get a nyet at the
++ * same time as either of those on a BULK/CONTROL OUT that
++ * started with a PING. The nyet takes precedence.
++ */
++ handle_hc_nyet_intr(hcd, hc, hc_regs, qtd);
++ } else if (hcint.b.bblerr) {
++ handle_hc_babble_intr(hcd, hc, hc_regs, qtd);
++ } else if (hcint.b.frmovrun) {
++ handle_hc_frmovrun_intr(hcd, hc, hc_regs, qtd);
++ } else if (hcint.b.nak && !hcintmsk.b.nak) {
++ /*
++ * If nak is not masked, it's because a non-split IN transfer
++ * is in an error state. In that case, the nak is handled by
++ * the nak interrupt handler, not here. Handle nak here for
++ * BULK/CONTROL OUT transfers, which halt on a NAK to allow
++ * rewinding the buffer pointer.
++ */
++ handle_hc_nak_intr(hcd, hc, hc_regs, qtd);
++ } else if (hcint.b.ack && !hcintmsk.b.ack) {
++ /*
++ * If ack is not masked, it's because a non-split IN transfer
++ * is in an error state. In that case, the ack is handled by
++ * the ack interrupt handler, not here. Handle ack here for
++ * split transfers. Start splits halt on ACK.
++ */
++ handle_hc_ack_intr(hcd, hc, hc_regs, qtd);
++ } else {
++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++ /*
++ * A periodic transfer halted with no other channel
++ * interrupts set. Assume it was halted by the core
++ * because it could not be completed in its scheduled
++ * (micro)frame.
++ */
++#ifdef DEBUG
++ DWC_PRINT("%s: Halt channel %d (assume incomplete periodic transfer)\n",
++ __func__, hc->hc_num);
++#endif
++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE);
++ } else {
++ DWC_ERROR("%s: Channel %d, DMA Mode -- ChHltd set, but reason "
++ "for halting is unknown, hcint 0x%08x, intsts 0x%08x\n",
++ __func__, hc->hc_num, hcint.d32,
++ dwc_read_reg32(&hcd->core_if->core_global_regs->gintsts));
++ }
++ }
++ } else {
++ printk(KERN_DEBUG "NYET/NAK/ACK/other in non-error case, 0x%08x\n", hcint.d32);
++ }
++}
++
++/**
++ * Handles a host channel Channel Halted interrupt.
++ *
++ * In slave mode, this handler is called only when the driver specifically
++ * requests a halt. This occurs during handling other host channel interrupts
++ * (e.g. nak, xacterr, stall, nyet, etc.).
++ *
++ * In DMA mode, this is the interrupt that occurs when the core has finished
++ * processing a transfer on a channel. Other host channel interrupts (except
++ * ahberr) are disabled in DMA mode.
++ */
++static int32_t handle_hc_chhltd_intr(dwc_otg_hcd_t *hcd,
++ dwc_hc_t *hc,
++ dwc_otg_hc_regs_t *hc_regs,
++ dwc_otg_qtd_t *qtd)
++{
++ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++ "Channel Halted--\n", hc->hc_num);
++
++ if (hcd->core_if->dma_enable) {
++ handle_hc_chhltd_intr_dma(hcd, hc, hc_regs, qtd);
++ } else {
++#ifdef DEBUG
++ if (!halt_status_ok(hcd, hc, hc_regs, qtd)) {
++ return 1;
++ }
++#endif
++ release_channel(hcd, hc, qtd, hc->halt_status);
++ }
++
++ return 1;
++}
++
++/** Handles interrupt for a specific Host Channel */
++int32_t dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd_t *dwc_otg_hcd, uint32_t num)
++{
++ int retval = 0;
++ hcint_data_t hcint;
++ hcintmsk_data_t hcintmsk;
++ dwc_hc_t *hc;
++ dwc_otg_hc_regs_t *hc_regs;
++ dwc_otg_qtd_t *qtd;
++
++ DWC_DEBUGPL(DBG_HCDV, "--Host Channel Interrupt--, Channel %d\n", num);
++
++ hc = dwc_otg_hcd->hc_ptr_array[num];
++ hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[num];
++ qtd = list_entry(hc->qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry);
++
++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++ hcintmsk.d32 = dwc_read_reg32(&hc_regs->hcintmsk);
++ DWC_DEBUGPL(DBG_HCDV, " hcint 0x%08x, hcintmsk 0x%08x, hcint&hcintmsk 0x%08x\n",
++ hcint.d32, hcintmsk.d32, (hcint.d32 & hcintmsk.d32));
++ hcint.d32 = hcint.d32 & hcintmsk.d32;
++
++ if (!dwc_otg_hcd->core_if->dma_enable) {
++ if (hcint.b.chhltd && hcint.d32 != 0x2) {
++ hcint.b.chhltd = 0;
++ }
++ }
++
++ if (hcint.b.xfercomp) {
++ retval |= handle_hc_xfercomp_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++ /*
++ * If NYET occurred at same time as Xfer Complete, the NYET is
++ * handled by the Xfer Complete interrupt handler. Don't want
++ * to call the NYET interrupt handler in this case.
++ */
++ hcint.b.nyet = 0;
++ }
++ if (hcint.b.chhltd) {
++ retval |= handle_hc_chhltd_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++ }
++ if (hcint.b.ahberr) {
++ retval |= handle_hc_ahberr_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++ }
++ if (hcint.b.stall) {
++ retval |= handle_hc_stall_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++ }
++ if (hcint.b.nak) {
++ retval |= handle_hc_nak_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++ }
++ if (hcint.b.ack) {
++ retval |= handle_hc_ack_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++ }
++ if (hcint.b.nyet) {
++ retval |= handle_hc_nyet_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++ }
++ if (hcint.b.xacterr) {
++ retval |= handle_hc_xacterr_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++ }
++ if (hcint.b.bblerr) {
++ retval |= handle_hc_babble_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++ }
++ if (hcint.b.frmovrun) {
++ retval |= handle_hc_frmovrun_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++ }
++ if (hcint.b.datatglerr) {
++ retval |= handle_hc_datatglerr_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++ }
++
++ return retval;
++}
++
++#endif /* DWC_DEVICE_ONLY */
+diff --git a/drivers/usb/dwc_otg/dwc_otg_hcd_queue.c b/drivers/usb/dwc_otg/dwc_otg_hcd_queue.c
+new file mode 100644
+index 0000000..cfb1f16
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_hcd_queue.c
+@@ -0,0 +1,684 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_hcd_queue.c $
++ * $Revision: 1.5 $
++ * $Date: 2008-12-15 06:51:32 $
++ * $Change: 537387 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_DEVICE_ONLY
++
++/**
++ * @file
++ *
++ * This file contains the functions to manage Queue Heads and Queue
++ * Transfer Descriptors.
++ */
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/errno.h>
++#include <linux/list.h>
++#include <linux/interrupt.h>
++#include <linux/string.h>
++#include <linux/dma-mapping.h>
++
++#include "dwc_otg_driver.h"
++#include "dwc_otg_hcd.h"
++#include "dwc_otg_regs.h"
++
++/**
++ * This function allocates and initializes a QH.
++ *
++ * @param hcd The HCD state structure for the DWC OTG controller.
++ * @param[in] urb Holds the information about the device/endpoint that we need
++ * to initialize the QH.
++ *
++ * @return Returns pointer to the newly allocated QH, or NULL on error. */
++dwc_otg_qh_t *dwc_otg_hcd_qh_create (dwc_otg_hcd_t *hcd, struct urb *urb)
++{
++ dwc_otg_qh_t *qh;
++
++ /* Allocate memory */
++ /** @todo add memflags argument */
++ qh = dwc_otg_hcd_qh_alloc ();
++ if (qh == NULL) {
++ return NULL;
++ }
++
++ dwc_otg_hcd_qh_init (hcd, qh, urb);
++ return qh;
++}
++
++/** Free each QTD in the QH's QTD-list then free the QH. QH should already be
++ * removed from a list. QTD list should already be empty if called from URB
++ * Dequeue.
++ *
++ * @param[in] hcd HCD instance.
++ * @param[in] qh The QH to free.
++ */
++void dwc_otg_hcd_qh_free (dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
++{
++ dwc_otg_qtd_t *qtd;
++ struct list_head *pos;
++ unsigned long flags;
++
++ /* Free each QTD in the QTD list */
++ SPIN_LOCK_IRQSAVE(&hcd->lock, flags)
++ for (pos = qh->qtd_list.next;
++ pos != &qh->qtd_list;
++ pos = qh->qtd_list.next)
++ {
++ list_del (pos);
++ qtd = dwc_list_to_qtd (pos);
++ dwc_otg_hcd_qtd_free (qtd);
++ }
++ SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags)
++
++ if (qh->dw_align_buf) {
++ dma_free_coherent((dwc_otg_hcd_to_hcd(hcd))->self.controller,
++ hcd->core_if->core_params->max_transfer_size,
++ qh->dw_align_buf,
++ qh->dw_align_buf_dma);
++ }
++
++ kfree (qh);
++ return;
++}
++
++/** Initializes a QH structure.
++ *
++ * @param[in] hcd The HCD state structure for the DWC OTG controller.
++ * @param[in] qh The QH to init.
++ * @param[in] urb Holds the information about the device/endpoint that we need
++ * to initialize the QH. */
++#define SCHEDULE_SLOP 10
++void dwc_otg_hcd_qh_init(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, struct urb *urb)
++{
++ char *speed, *type;
++ memset (qh, 0, sizeof (dwc_otg_qh_t));
++
++ /* Initialize QH */
++ switch (usb_pipetype(urb->pipe)) {
++ case PIPE_CONTROL:
++ qh->ep_type = USB_ENDPOINT_XFER_CONTROL;
++ break;
++ case PIPE_BULK:
++ qh->ep_type = USB_ENDPOINT_XFER_BULK;
++ break;
++ case PIPE_ISOCHRONOUS:
++ qh->ep_type = USB_ENDPOINT_XFER_ISOC;
++ break;
++ case PIPE_INTERRUPT:
++ qh->ep_type = USB_ENDPOINT_XFER_INT;
++ break;
++ }
++
++ qh->ep_is_in = usb_pipein(urb->pipe) ? 1 : 0;
++
++ qh->data_toggle = DWC_OTG_HC_PID_DATA0;
++ qh->maxp = usb_maxpacket(urb->dev, urb->pipe, !(usb_pipein(urb->pipe)));
++ INIT_LIST_HEAD(&qh->qtd_list);
++ INIT_LIST_HEAD(&qh->qh_list_entry);
++ qh->channel = NULL;
++
++ /* FS/LS Enpoint on HS Hub
++ * NOT virtual root hub */
++ qh->do_split = 0;
++ if (((urb->dev->speed == USB_SPEED_LOW) ||
++ (urb->dev->speed == USB_SPEED_FULL)) &&
++ (urb->dev->tt) && (urb->dev->tt->hub) && (urb->dev->tt->hub->devnum != 1))
++ {
++ DWC_DEBUGPL(DBG_HCD, "QH init: EP %d: TT found at hub addr %d, for port %d\n",
++ usb_pipeendpoint(urb->pipe), urb->dev->tt->hub->devnum,
++ urb->dev->ttport);
++ qh->do_split = 1;
++ }
++
++ if (qh->ep_type == USB_ENDPOINT_XFER_INT ||
++ qh->ep_type == USB_ENDPOINT_XFER_ISOC) {
++ /* Compute scheduling parameters once and save them. */
++ hprt0_data_t hprt;
++
++ /** @todo Account for split transfers in the bus time. */
++ int bytecount = dwc_hb_mult(qh->maxp) * dwc_max_packet(qh->maxp);
++
++ /* FIXME: work-around patch by Steven */
++ qh->usecs = NS_TO_US(usb_calc_bus_time(urb->dev->speed,
++ usb_pipein(urb->pipe),
++ (qh->ep_type == USB_ENDPOINT_XFER_ISOC),
++ bytecount));
++
++ /* Start in a slightly future (micro)frame. */
++ qh->sched_frame = dwc_frame_num_inc(hcd->frame_number,
++ SCHEDULE_SLOP);
++ qh->interval = urb->interval;
++#if 0
++ /* Increase interrupt polling rate for debugging. */
++ if (qh->ep_type == USB_ENDPOINT_XFER_INT) {
++ qh->interval = 8;
++ }
++#endif
++ hprt.d32 = dwc_read_reg32(hcd->core_if->host_if->hprt0);
++ if ((hprt.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED) &&
++ ((urb->dev->speed == USB_SPEED_LOW) ||
++ (urb->dev->speed == USB_SPEED_FULL))) {
++ qh->interval *= 8;
++ qh->sched_frame |= 0x7;
++ qh->start_split_frame = qh->sched_frame;
++ }
++
++ }
++
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD QH Initialized\n");
++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - qh = %p\n", qh);
++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Device Address = %d\n",
++ urb->dev->devnum);
++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Endpoint %d, %s\n",
++ usb_pipeendpoint(urb->pipe),
++ usb_pipein(urb->pipe) == USB_DIR_IN ? "IN" : "OUT");
++
++ switch(urb->dev->speed) {
++ case USB_SPEED_LOW:
++ speed = "low";
++ break;
++ case USB_SPEED_FULL:
++ speed = "full";
++ break;
++ case USB_SPEED_HIGH:
++ speed = "high";
++ break;
++ default:
++ speed = "?";
++ break;
++ }
++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Speed = %s\n", speed);
++
++ switch (qh->ep_type) {
++ case USB_ENDPOINT_XFER_ISOC:
++ type = "isochronous";
++ break;
++ case USB_ENDPOINT_XFER_INT:
++ type = "interrupt";
++ break;
++ case USB_ENDPOINT_XFER_CONTROL:
++ type = "control";
++ break;
++ case USB_ENDPOINT_XFER_BULK:
++ type = "bulk";
++ break;
++ default:
++ type = "?";
++ break;
++ }
++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Type = %s\n",type);
++
++#ifdef DEBUG
++ if (qh->ep_type == USB_ENDPOINT_XFER_INT) {
++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - usecs = %d\n",
++ qh->usecs);
++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - interval = %d\n",
++ qh->interval);
++ }
++#endif
++ qh->dw_align_buf = NULL;
++ return;
++}
++
++/**
++ * Checks that a channel is available for a periodic transfer.
++ *
++ * @return 0 if successful, negative error code otherise.
++ */
++static int periodic_channel_available(dwc_otg_hcd_t *hcd)
++{
++ /*
++ * Currently assuming that there is a dedicated host channnel for each
++ * periodic transaction plus at least one host channel for
++ * non-periodic transactions.
++ */
++ int status;
++ int num_channels;
++
++ num_channels = hcd->core_if->core_params->host_channels;
++ if ((hcd->periodic_channels + hcd->non_periodic_channels < num_channels) &&
++ (hcd->periodic_channels < num_channels - 1)) {
++ status = 0;
++ }
++ else {
++ DWC_NOTICE("%s: Total channels: %d, Periodic: %d, Non-periodic: %d\n",
++ __func__, num_channels, hcd->periodic_channels,
++ hcd->non_periodic_channels);
++ status = -ENOSPC;
++ }
++
++ return status;
++}
++
++/**
++ * Checks that there is sufficient bandwidth for the specified QH in the
++ * periodic schedule. For simplicity, this calculation assumes that all the
++ * transfers in the periodic schedule may occur in the same (micro)frame.
++ *
++ * @param hcd The HCD state structure for the DWC OTG controller.
++ * @param qh QH containing periodic bandwidth required.
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++static int check_periodic_bandwidth(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
++{
++ int status;
++ uint16_t max_claimed_usecs;
++
++ status = 0;
++
++ if (hcd->core_if->core_params->speed == DWC_SPEED_PARAM_HIGH) {
++ /*
++ * High speed mode.
++ * Max periodic usecs is 80% x 125 usec = 100 usec.
++ */
++ max_claimed_usecs = 100 - qh->usecs;
++ } else {
++ /*
++ * Full speed mode.
++ * Max periodic usecs is 90% x 1000 usec = 900 usec.
++ */
++ max_claimed_usecs = 900 - qh->usecs;
++ }
++
++ if (hcd->periodic_usecs > max_claimed_usecs) {
++ DWC_NOTICE("%s: already claimed usecs %d, required usecs %d\n",
++ __func__, hcd->periodic_usecs, qh->usecs);
++ status = -ENOSPC;
++ }
++
++ return status;
++}
++
++/**
++ * Checks that the max transfer size allowed in a host channel is large enough
++ * to handle the maximum data transfer in a single (micro)frame for a periodic
++ * transfer.
++ *
++ * @param hcd The HCD state structure for the DWC OTG controller.
++ * @param qh QH for a periodic endpoint.
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++static int check_max_xfer_size(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
++{
++ int status;
++ uint32_t max_xfer_size;
++ uint32_t max_channel_xfer_size;
++
++ status = 0;
++
++ max_xfer_size = dwc_max_packet(qh->maxp) * dwc_hb_mult(qh->maxp);
++ max_channel_xfer_size = hcd->core_if->core_params->max_transfer_size;
++
++ if (max_xfer_size > max_channel_xfer_size) {
++ DWC_NOTICE("%s: Periodic xfer length %d > "
++ "max xfer length for channel %d\n",
++ __func__, max_xfer_size, max_channel_xfer_size);
++ status = -ENOSPC;
++ }
++
++ return status;
++}
++
++/**
++ * Schedules an interrupt or isochronous transfer in the periodic schedule.
++ *
++ * @param hcd The HCD state structure for the DWC OTG controller.
++ * @param qh QH for the periodic transfer. The QH should already contain the
++ * scheduling information.
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++static int schedule_periodic(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
++{
++ int status = 0;
++
++ status = periodic_channel_available(hcd);
++ if (status) {
++ DWC_NOTICE("%s: No host channel available for periodic "
++ "transfer.\n", __func__);
++ return status;
++ }
++
++ status = check_periodic_bandwidth(hcd, qh);
++ if (status) {
++ DWC_NOTICE("%s: Insufficient periodic bandwidth for "
++ "periodic transfer.\n", __func__);
++ return status;
++ }
++
++ status = check_max_xfer_size(hcd, qh);
++ if (status) {
++ DWC_NOTICE("%s: Channel max transfer size too small "
++ "for periodic transfer.\n", __func__);
++ return status;
++ }
++
++ /* Always start in the inactive schedule. */
++ list_add_tail(&qh->qh_list_entry, &hcd->periodic_sched_inactive);
++
++ /* Reserve the periodic channel. */
++ hcd->periodic_channels++;
++
++ /* Update claimed usecs per (micro)frame. */
++ hcd->periodic_usecs += qh->usecs;
++
++ /* Update average periodic bandwidth claimed and # periodic reqs for usbfs. */
++ hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_allocated += qh->usecs / qh->interval;
++ if (qh->ep_type == USB_ENDPOINT_XFER_INT) {
++ hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_int_reqs++;
++ DWC_DEBUGPL(DBG_HCD, "Scheduled intr: qh %p, usecs %d, period %d\n",
++ qh, qh->usecs, qh->interval);
++ } else {
++ hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_isoc_reqs++;
++ DWC_DEBUGPL(DBG_HCD, "Scheduled isoc: qh %p, usecs %d, period %d\n",
++ qh, qh->usecs, qh->interval);
++ }
++
++ return status;
++}
++
++/**
++ * This function adds a QH to either the non periodic or periodic schedule if
++ * it is not already in the schedule. If the QH is already in the schedule, no
++ * action is taken.
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++int dwc_otg_hcd_qh_add (dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
++{
++ unsigned long flags;
++ int status = 0;
++
++ SPIN_LOCK_IRQSAVE(&hcd->lock, flags)
++
++ if (!list_empty(&qh->qh_list_entry)) {
++ /* QH already in a schedule. */
++ goto done;
++ }
++
++ /* Add the new QH to the appropriate schedule */
++ if (dwc_qh_is_non_per(qh)) {
++ /* Always start in the inactive schedule. */
++ list_add_tail(&qh->qh_list_entry, &hcd->non_periodic_sched_inactive);
++ } else {
++ status = schedule_periodic(hcd, qh);
++ }
++
++ done:
++ SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags)
++
++ return status;
++}
++
++/**
++ * Removes an interrupt or isochronous transfer from the periodic schedule.
++ *
++ * @param hcd The HCD state structure for the DWC OTG controller.
++ * @param qh QH for the periodic transfer.
++ */
++static void deschedule_periodic(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
++{
++ list_del_init(&qh->qh_list_entry);
++
++ /* Release the periodic channel reservation. */
++ hcd->periodic_channels--;
++
++ /* Update claimed usecs per (micro)frame. */
++ hcd->periodic_usecs -= qh->usecs;
++
++ /* Update average periodic bandwidth claimed and # periodic reqs for usbfs. */
++ hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_allocated -= qh->usecs / qh->interval;
++
++ if (qh->ep_type == USB_ENDPOINT_XFER_INT) {
++ hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_int_reqs--;
++ DWC_DEBUGPL(DBG_HCD, "Descheduled intr: qh %p, usecs %d, period %d\n",
++ qh, qh->usecs, qh->interval);
++ } else {
++ hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_isoc_reqs--;
++ DWC_DEBUGPL(DBG_HCD, "Descheduled isoc: qh %p, usecs %d, period %d\n",
++ qh, qh->usecs, qh->interval);
++ }
++}
++
++/**
++ * Removes a QH from either the non-periodic or periodic schedule. Memory is
++ * not freed.
++ *
++ * @param[in] hcd The HCD state structure.
++ * @param[in] qh QH to remove from schedule. */
++void dwc_otg_hcd_qh_remove (dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
++{
++ unsigned long flags;
++
++ SPIN_LOCK_IRQSAVE(&hcd->lock, flags);
++
++ if (list_empty(&qh->qh_list_entry)) {
++ /* QH is not in a schedule. */
++ goto done;
++ }
++
++ if (dwc_qh_is_non_per(qh)) {
++ if (hcd->non_periodic_qh_ptr == &qh->qh_list_entry) {
++ hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next;
++ }
++ list_del_init(&qh->qh_list_entry);
++ } else {
++ deschedule_periodic(hcd, qh);
++ }
++
++ done:
++ SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags)
++}
++
++/**
++ * Deactivates a QH. For non-periodic QHs, removes the QH from the active
++ * non-periodic schedule. The QH is added to the inactive non-periodic
++ * schedule if any QTDs are still attached to the QH.
++ *
++ * For periodic QHs, the QH is removed from the periodic queued schedule. If
++ * there are any QTDs still attached to the QH, the QH is added to either the
++ * periodic inactive schedule or the periodic ready schedule and its next
++ * scheduled frame is calculated. The QH is placed in the ready schedule if
++ * the scheduled frame has been reached already. Otherwise it's placed in the
++ * inactive schedule. If there are no QTDs attached to the QH, the QH is
++ * completely removed from the periodic schedule.
++ */
++void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, int sched_next_periodic_split)
++{
++ unsigned long flags;
++ SPIN_LOCK_IRQSAVE(&hcd->lock, flags);
++
++ if (dwc_qh_is_non_per(qh)) {
++ dwc_otg_hcd_qh_remove(hcd, qh);
++ if (!list_empty(&qh->qtd_list)) {
++ /* Add back to inactive non-periodic schedule. */
++ dwc_otg_hcd_qh_add(hcd, qh);
++ }
++ } else {
++ uint16_t frame_number = dwc_otg_hcd_get_frame_number(dwc_otg_hcd_to_hcd(hcd));
++
++ if (qh->do_split) {
++ /* Schedule the next continuing periodic split transfer */
++ if (sched_next_periodic_split) {
++
++ qh->sched_frame = frame_number;
++ if (dwc_frame_num_le(frame_number,
++ dwc_frame_num_inc(qh->start_split_frame, 1))) {
++ /*
++ * Allow one frame to elapse after start
++ * split microframe before scheduling
++ * complete split, but DONT if we are
++ * doing the next start split in the
++ * same frame for an ISOC out.
++ */
++ if ((qh->ep_type != USB_ENDPOINT_XFER_ISOC) || (qh->ep_is_in != 0)) {
++ qh->sched_frame = dwc_frame_num_inc(qh->sched_frame, 1);
++ }
++ }
++ } else {
++ qh->sched_frame = dwc_frame_num_inc(qh->start_split_frame,
++ qh->interval);
++ if (dwc_frame_num_le(qh->sched_frame, frame_number)) {
++ qh->sched_frame = frame_number;
++ }
++ qh->sched_frame |= 0x7;
++ qh->start_split_frame = qh->sched_frame;
++ }
++ } else {
++ qh->sched_frame = dwc_frame_num_inc(qh->sched_frame, qh->interval);
++ if (dwc_frame_num_le(qh->sched_frame, frame_number)) {
++ qh->sched_frame = frame_number;
++ }
++ }
++
++ if (list_empty(&qh->qtd_list)) {
++ dwc_otg_hcd_qh_remove(hcd, qh);
++ } else {
++ /*
++ * Remove from periodic_sched_queued and move to
++ * appropriate queue.
++ */
++ if (qh->sched_frame == frame_number) {
++ list_move(&qh->qh_list_entry,
++ &hcd->periodic_sched_ready);
++ } else {
++ list_move(&qh->qh_list_entry,
++ &hcd->periodic_sched_inactive);
++ }
++ }
++ }
++
++ SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags);
++}
++
++/**
++ * This function allocates and initializes a QTD.
++ *
++ * @param[in] urb The URB to create a QTD from. Each URB-QTD pair will end up
++ * pointing to each other so each pair should have a unique correlation.
++ *
++ * @return Returns pointer to the newly allocated QTD, or NULL on error. */
++dwc_otg_qtd_t *dwc_otg_hcd_qtd_create (struct urb *urb)
++{
++ dwc_otg_qtd_t *qtd;
++
++ qtd = dwc_otg_hcd_qtd_alloc ();
++ if (qtd == NULL) {
++ return NULL;
++ }
++
++ dwc_otg_hcd_qtd_init (qtd, urb);
++ return qtd;
++}
++
++/**
++ * Initializes a QTD structure.
++ *
++ * @param[in] qtd The QTD to initialize.
++ * @param[in] urb The URB to use for initialization. */
++void dwc_otg_hcd_qtd_init (dwc_otg_qtd_t *qtd, struct urb *urb)
++{
++ memset (qtd, 0, sizeof (dwc_otg_qtd_t));
++ qtd->urb = urb;
++ if (usb_pipecontrol(urb->pipe)) {
++ /*
++ * The only time the QTD data toggle is used is on the data
++ * phase of control transfers. This phase always starts with
++ * DATA1.
++ */
++ qtd->data_toggle = DWC_OTG_HC_PID_DATA1;
++ qtd->control_phase = DWC_OTG_CONTROL_SETUP;
++ }
++
++ /* start split */
++ qtd->complete_split = 0;
++ qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL;
++ qtd->isoc_split_offset = 0;
++
++ /* Store the qtd ptr in the urb to reference what QTD. */
++ urb->hcpriv = qtd;
++ return;
++}
++
++/**
++ * This function adds a QTD to the QTD-list of a QH. It will find the correct
++ * QH to place the QTD into. If it does not find a QH, then it will create a
++ * new QH. If the QH to which the QTD is added is not currently scheduled, it
++ * is placed into the proper schedule based on its EP type.
++ *
++ * @param[in] qtd The QTD to add
++ * @param[in] dwc_otg_hcd The DWC HCD structure
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++int dwc_otg_hcd_qtd_add (dwc_otg_qtd_t *qtd,
++ dwc_otg_hcd_t *dwc_otg_hcd)
++{
++ struct usb_host_endpoint *ep;
++ dwc_otg_qh_t *qh;
++ unsigned long flags;
++ int retval = 0;
++
++ struct urb *urb = qtd->urb;
++
++ SPIN_LOCK_IRQSAVE(&dwc_otg_hcd->lock, flags);
++
++ /*
++ * Get the QH which holds the QTD-list to insert to. Create QH if it
++ * doesn't exist.
++ */
++ ep = dwc_urb_to_endpoint(urb);
++ qh = (dwc_otg_qh_t *)ep->hcpriv;
++ if (qh == NULL) {
++ qh = dwc_otg_hcd_qh_create (dwc_otg_hcd, urb);
++ if (qh == NULL) {
++ goto done;
++ }
++ ep->hcpriv = qh;
++ }
++
++ retval = dwc_otg_hcd_qh_add(dwc_otg_hcd, qh);
++ if (retval == 0) {
++ list_add_tail(&qtd->qtd_list_entry, &qh->qtd_list);
++ }
++
++ done:
++ SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags);
++
++ return retval;
++}
++
++#endif /* DWC_DEVICE_ONLY */
+diff --git a/drivers/usb/dwc_otg/dwc_otg_pcd.c b/drivers/usb/dwc_otg/dwc_otg_pcd.c
+new file mode 100644
+index 0000000..030a3f2
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_pcd.c
+@@ -0,0 +1,2523 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd.c $
++ * $Revision: 1.5 $
++ * $Date: 2008-11-27 09:21:25 $
++ * $Change: 1115682 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_HOST_ONLY
++
++/** @file
++ * This file implements the Peripheral Controller Driver.
++ *
++ * The Peripheral Controller Driver (PCD) is responsible for
++ * translating requests from the Function Driver into the appropriate
++ * actions on the DWC_otg controller. It isolates the Function Driver
++ * from the specifics of the controller by providing an API to the
++ * Function Driver.
++ *
++ * The Peripheral Controller Driver for Linux will implement the
++ * Gadget API, so that the existing Gadget drivers can be used.
++ * (Gadget Driver is the Linux terminology for a Function Driver.)
++ *
++ * The Linux Gadget API is defined in the header file
++ * <code><linux/usb_gadget.h></code>. The USB EP operations API is
++ * defined in the structure <code>usb_ep_ops</code> and the USB
++ * Controller API is defined in the structure
++ * <code>usb_gadget_ops</code>.
++ *
++ * An important function of the PCD is managing interrupts generated
++ * by the DWC_otg controller. The implementation of the DWC_otg device
++ * mode interrupt service routines is in dwc_otg_pcd_intr.c.
++ *
++ * @todo Add Device Mode test modes (Test J mode, Test K mode, etc).
++ * @todo Does it work when the request size is greater than DEPTSIZ
++ * transfer size
++ *
++ */
++
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/errno.h>
++#include <linux/list.h>
++#include <linux/interrupt.h>
++#include <linux/string.h>
++#include <linux/dma-mapping.h>
++#include <linux/version.h>
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21)
++# include <linux/usb/ch9.h>
++#else
++# include <linux/usb_ch9.h>
++#endif
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)
++#include <linux/usb/gadget.h>
++#else
++#include <linux/usb_gadget.h>
++#endif
++
++#include "dwc_otg_driver.h"
++#include "dwc_otg_pcd.h"
++
++
++/**
++ * Static PCD pointer for use in usb_gadget_register_driver and
++ * usb_gadget_unregister_driver. Initialized in dwc_otg_pcd_init.
++ */
++static dwc_otg_pcd_t *s_pcd = 0;
++
++
++/* Display the contents of the buffer */
++extern void dump_msg(const u8 *buf, unsigned int length);
++
++
++/**
++ * This function completes a request. It call's the request call back.
++ */
++void dwc_otg_request_done(dwc_otg_pcd_ep_t *ep, dwc_otg_pcd_request_t *req,
++ int status)
++{
++ unsigned stopped = ep->stopped;
++
++ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, ep);
++ list_del_init(&req->queue);
++
++ if (req->req.status == -EINPROGRESS) {
++ req->req.status = status;
++ } else {
++ status = req->req.status;
++ }
++
++ /* don't modify queue heads during completion callback */
++ ep->stopped = 1;
++ SPIN_UNLOCK(&ep->pcd->lock);
++ req->req.complete(&ep->ep, &req->req);
++ SPIN_LOCK(&ep->pcd->lock);
++
++ if (ep->pcd->request_pending > 0) {
++ --ep->pcd->request_pending;
++ }
++
++ ep->stopped = stopped;
++}
++
++/**
++ * This function terminates all the requsts in the EP request queue.
++ */
++void dwc_otg_request_nuke(dwc_otg_pcd_ep_t *ep)
++{
++ dwc_otg_pcd_request_t *req;
++
++ ep->stopped = 1;
++
++ /* called with irqs blocked?? */
++ while (!list_empty(&ep->queue)) {
++ req = list_entry(ep->queue.next, dwc_otg_pcd_request_t,
++ queue);
++ dwc_otg_request_done(ep, req, -ESHUTDOWN);
++ }
++}
++
++/* USB Endpoint Operations */
++/*
++ * The following sections briefly describe the behavior of the Gadget
++ * API endpoint operations implemented in the DWC_otg driver
++ * software. Detailed descriptions of the generic behavior of each of
++ * these functions can be found in the Linux header file
++ * include/linux/usb_gadget.h.
++ *
++ * The Gadget API provides wrapper functions for each of the function
++ * pointers defined in usb_ep_ops. The Gadget Driver calls the wrapper
++ * function, which then calls the underlying PCD function. The
++ * following sections are named according to the wrapper
++ * functions. Within each section, the corresponding DWC_otg PCD
++ * function name is specified.
++ *
++ */
++
++/**
++ * This function assigns periodic Tx FIFO to an periodic EP
++ * in shared Tx FIFO mode
++ */
++static uint32_t assign_perio_tx_fifo(dwc_otg_core_if_t *core_if)
++{
++ uint32_t PerTxMsk = 1;
++ int i;
++ for(i = 0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; ++i)
++ {
++ if((PerTxMsk & core_if->p_tx_msk) == 0) {
++ core_if->p_tx_msk |= PerTxMsk;
++ return i + 1;
++ }
++ PerTxMsk <<= 1;
++ }
++ return 0;
++}
++/**
++ * This function releases periodic Tx FIFO
++ * in shared Tx FIFO mode
++ */
++static void release_perio_tx_fifo(dwc_otg_core_if_t *core_if, uint32_t fifo_num)
++{
++ core_if->p_tx_msk = (core_if->p_tx_msk & (1 << (fifo_num - 1))) ^ core_if->p_tx_msk;
++}
++/**
++ * This function assigns periodic Tx FIFO to an periodic EP
++ * in shared Tx FIFO mode
++ */
++static uint32_t assign_tx_fifo(dwc_otg_core_if_t *core_if)
++{
++ uint32_t TxMsk = 1;
++ int i;
++
++ for(i = 0; i < core_if->hwcfg4.b.num_in_eps; ++i)
++ {
++ if((TxMsk & core_if->tx_msk) == 0) {
++ core_if->tx_msk |= TxMsk;
++ return i + 1;
++ }
++ TxMsk <<= 1;
++ }
++ return 0;
++}
++/**
++ * This function releases periodic Tx FIFO
++ * in shared Tx FIFO mode
++ */
++static void release_tx_fifo(dwc_otg_core_if_t *core_if, uint32_t fifo_num)
++{
++ core_if->tx_msk = (core_if->tx_msk & (1 << (fifo_num - 1))) ^ core_if->tx_msk;
++}
++
++/**
++ * This function is called by the Gadget Driver for each EP to be
++ * configured for the current configuration (SET_CONFIGURATION).
++ *
++ * This function initializes the dwc_otg_ep_t data structure, and then
++ * calls dwc_otg_ep_activate.
++ */
++static int dwc_otg_pcd_ep_enable(struct usb_ep *usb_ep,
++ const struct usb_endpoint_descriptor *ep_desc)
++{
++ dwc_otg_pcd_ep_t *ep = 0;
++ dwc_otg_pcd_t *pcd = 0;
++ unsigned long flags;
++
++ DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p)\n", __func__, usb_ep, ep_desc);
++
++ ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
++ if (!usb_ep || !ep_desc || ep->desc ||
++ ep_desc->bDescriptorType != USB_DT_ENDPOINT) {
++ DWC_WARN("%s, bad ep or descriptor\n", __func__);
++ return -EINVAL;
++ }
++ if (ep == &ep->pcd->ep0) {
++ DWC_WARN("%s, bad ep(0)\n", __func__);
++ return -EINVAL;
++ }
++
++ /* Check FIFO size? */
++ if (!ep_desc->wMaxPacketSize) {
++ DWC_WARN("%s, bad %s maxpacket\n", __func__, usb_ep->name);
++ return -ERANGE;
++ }
++
++ pcd = ep->pcd;
++ if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) {
++ DWC_WARN("%s, bogus device state\n", __func__);
++ return -ESHUTDOWN;
++ }
++
++ SPIN_LOCK_IRQSAVE(&pcd->lock, flags);
++
++ ep->desc = ep_desc;
++ ep->ep.maxpacket = le16_to_cpu (ep_desc->wMaxPacketSize);
++
++ /*
++ * Activate the EP
++ */
++ ep->stopped = 0;
++
++ ep->dwc_ep.is_in = (USB_DIR_IN & ep_desc->bEndpointAddress) != 0;
++ ep->dwc_ep.maxpacket = ep->ep.maxpacket;
++
++ ep->dwc_ep.type = ep_desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
++
++ if(ep->dwc_ep.is_in) {
++ if(!pcd->otg_dev->core_if->en_multiple_tx_fifo) {
++ ep->dwc_ep.tx_fifo_num = 0;
++
++ if (ep->dwc_ep.type == USB_ENDPOINT_XFER_ISOC) {
++ /*
++ * if ISOC EP then assign a Periodic Tx FIFO.
++ */
++ ep->dwc_ep.tx_fifo_num = assign_perio_tx_fifo(pcd->otg_dev->core_if);
++ }
++ } else {
++ /*
++ * if Dedicated FIFOs mode is on then assign a Tx FIFO.
++ */
++ ep->dwc_ep.tx_fifo_num = assign_tx_fifo(pcd->otg_dev->core_if);
++
++ }
++ }
++ /* Set initial data PID. */
++ if (ep->dwc_ep.type == USB_ENDPOINT_XFER_BULK) {
++ ep->dwc_ep.data_pid_start = 0;
++ }
++
++ DWC_DEBUGPL(DBG_PCD, "Activate %s-%s: type=%d, mps=%d desc=%p\n",
++ ep->ep.name, (ep->dwc_ep.is_in ?"IN":"OUT"),
++ ep->dwc_ep.type, ep->dwc_ep.maxpacket, ep->desc);
++
++ if(ep->dwc_ep.type != USB_ENDPOINT_XFER_ISOC) {
++ ep->dwc_ep.desc_addr = dwc_otg_ep_alloc_desc_chain(&ep->dwc_ep.dma_desc_addr, MAX_DMA_DESC_CNT);
++ }
++
++ dwc_otg_ep_activate(GET_CORE_IF(pcd), &ep->dwc_ep);
++ SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
++
++ return 0;
++}
++
++/**
++ * This function is called when an EP is disabled due to disconnect or
++ * change in configuration. Any pending requests will terminate with a
++ * status of -ESHUTDOWN.
++ *
++ * This function modifies the dwc_otg_ep_t data structure for this EP,
++ * and then calls dwc_otg_ep_deactivate.
++ */
++static int dwc_otg_pcd_ep_disable(struct usb_ep *usb_ep)
++{
++ dwc_otg_pcd_ep_t *ep;
++ dwc_otg_pcd_t *pcd = 0;
++ unsigned long flags;
++
++ DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, usb_ep);
++ ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
++ if (!usb_ep || !ep->desc) {
++ DWC_DEBUGPL(DBG_PCD, "%s, %s not enabled\n", __func__,
++ usb_ep ? ep->ep.name : NULL);
++ return -EINVAL;
++ }
++
++ SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags);
++
++ dwc_otg_request_nuke(ep);
++
++ dwc_otg_ep_deactivate(GET_CORE_IF(ep->pcd), &ep->dwc_ep);
++ ep->desc = 0;
++ ep->stopped = 1;
++
++ if(ep->dwc_ep.is_in) {
++ dwc_otg_flush_tx_fifo(GET_CORE_IF(ep->pcd), ep->dwc_ep.tx_fifo_num);
++ release_perio_tx_fifo(GET_CORE_IF(ep->pcd), ep->dwc_ep.tx_fifo_num);
++ release_tx_fifo(GET_CORE_IF(ep->pcd), ep->dwc_ep.tx_fifo_num);
++ }
++
++ /* Free DMA Descriptors */
++ pcd = ep->pcd;
++
++ SPIN_UNLOCK_IRQRESTORE(&ep->pcd->lock, flags);
++
++ if(ep->dwc_ep.type != USB_ENDPOINT_XFER_ISOC && ep->dwc_ep.desc_addr) {
++ dwc_otg_ep_free_desc_chain(ep->dwc_ep.desc_addr, ep->dwc_ep.dma_desc_addr, MAX_DMA_DESC_CNT);
++ }
++
++ DWC_DEBUGPL(DBG_PCD, "%s disabled\n", usb_ep->name);
++ return 0;
++}
++
++
++/**
++ * This function allocates a request object to use with the specified
++ * endpoint.
++ *
++ * @param ep The endpoint to be used with with the request
++ * @param gfp_flags the GFP_* flags to use.
++ */
++static struct usb_request *dwc_otg_pcd_alloc_request(struct usb_ep *ep,
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++ int gfp_flags
++#else
++ gfp_t gfp_flags
++#endif
++ )
++{
++ dwc_otg_pcd_request_t *req;
++
++ DWC_DEBUGPL(DBG_PCDV,"%s(%p,%d)\n", __func__, ep, gfp_flags);
++ if (0 == ep) {
++ DWC_WARN("%s() %s\n", __func__, "Invalid EP!\n");
++ return 0;
++ }
++ req = kmalloc(sizeof(dwc_otg_pcd_request_t), gfp_flags);
++ if (0 == req) {
++ DWC_WARN("%s() %s\n", __func__,
++ "request allocation failed!\n");
++ return 0;
++ }
++ memset(req, 0, sizeof(dwc_otg_pcd_request_t));
++ req->req.dma = DMA_ADDR_INVALID;
++ INIT_LIST_HEAD(&req->queue);
++ return &req->req;
++}
++
++/**
++ * This function frees a request object.
++ *
++ * @param ep The endpoint associated with the request
++ * @param req The request being freed
++ */
++static void dwc_otg_pcd_free_request(struct usb_ep *ep,
++ struct usb_request *req)
++{
++ dwc_otg_pcd_request_t *request;
++ DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p)\n", __func__, ep, req);
++
++ if (0 == ep || 0 == req) {
++ DWC_WARN("%s() %s\n", __func__,
++ "Invalid ep or req argument!\n");
++ return;
++ }
++
++ request = container_of(req, dwc_otg_pcd_request_t, req);
++ kfree(request);
++}
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23)
++/**
++ * This function allocates an I/O buffer to be used for a transfer
++ * to/from the specified endpoint.
++ *
++ * @param usb_ep The endpoint to be used with with the request
++ * @param bytes The desired number of bytes for the buffer
++ * @param dma Pointer to the buffer's DMA address; must be valid
++ * @param gfp_flags the GFP_* flags to use.
++ * @return address of a new buffer or null is buffer could not be allocated.
++ */
++static void *dwc_otg_pcd_alloc_buffer(struct usb_ep *usb_ep, unsigned bytes,
++ dma_addr_t *dma,
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++ int gfp_flags
++#else
++ gfp_t gfp_flags
++#endif
++ )
++{
++ void *buf;
++ dwc_otg_pcd_ep_t *ep;
++ dwc_otg_pcd_t *pcd = 0;
++
++ ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
++ pcd = ep->pcd;
++
++ DWC_DEBUGPL(DBG_PCDV,"%s(%p,%d,%p,%0x)\n", __func__, usb_ep, bytes,
++ dma, gfp_flags);
++
++ /* Check dword alignment */
++ if ((bytes & 0x3UL) != 0) {
++ DWC_WARN("%s() Buffer size is not a multiple of"
++ "DWORD size (%d)",__func__, bytes);
++ }
++
++ if (GET_CORE_IF(pcd)->dma_enable) {
++ buf = dma_alloc_coherent (NULL, bytes, dma, gfp_flags);
++ }
++ else {
++ buf = kmalloc(bytes, gfp_flags);
++ }
++
++ /* Check dword alignment */
++ if (((int)buf & 0x3UL) != 0) {
++ DWC_WARN("%s() Buffer is not DWORD aligned (%p)",
++ __func__, buf);
++ }
++
++ return buf;
++}
++
++/**
++ * This function frees an I/O buffer that was allocated by alloc_buffer.
++ *
++ * @param usb_ep the endpoint associated with the buffer
++ * @param buf address of the buffer
++ * @param dma The buffer's DMA address
++ * @param bytes The number of bytes of the buffer
++ */
++static void dwc_otg_pcd_free_buffer(struct usb_ep *usb_ep, void *buf,
++ dma_addr_t dma, unsigned bytes)
++{
++ dwc_otg_pcd_ep_t *ep;
++ dwc_otg_pcd_t *pcd = 0;
++
++ ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
++ pcd = ep->pcd;
++
++ DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p,%0x,%d)\n", __func__, ep, buf, dma, bytes);
++
++ if (GET_CORE_IF(pcd)->dma_enable) {
++ dma_free_coherent (NULL, bytes, buf, dma);
++ }
++ else {
++ kfree(buf);
++ }
++}
++#endif
++
++
++/**
++ * This function is used to submit an I/O Request to an EP.
++ *
++ * - When the request completes the request's completion callback
++ * is called to return the request to the driver.
++ * - An EP, except control EPs, may have multiple requests
++ * pending.
++ * - Once submitted the request cannot be examined or modified.
++ * - Each request is turned into one or more packets.
++ * - A BULK EP can queue any amount of data; the transfer is
++ * packetized.
++ * - Zero length Packets are specified with the request 'zero'
++ * flag.
++ */
++static int dwc_otg_pcd_ep_queue(struct usb_ep *usb_ep,
++ struct usb_request *usb_req,
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++ int gfp_flags
++#else
++ gfp_t gfp_flags
++#endif
++ )
++{
++ int prevented = 0;
++ dwc_otg_pcd_request_t *req;
++ dwc_otg_pcd_ep_t *ep;
++ dwc_otg_pcd_t *pcd;
++ unsigned long flags = 0;
++ dwc_otg_core_if_t *_core_if;
++
++ DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p,%d)\n",
++ __func__, usb_ep, usb_req, gfp_flags);
++
++ req = container_of(usb_req, dwc_otg_pcd_request_t, req);
++ if (!usb_req || !usb_req->complete || !usb_req->buf ||
++ !list_empty(&req->queue)) {
++ DWC_WARN("%s, bad params\n", __func__);
++ return -EINVAL;
++ }
++
++ ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
++ if (!usb_ep || (!ep->desc && ep->dwc_ep.num != 0)/* || ep->stopped != 0*/) {
++ DWC_WARN("%s, bad ep\n", __func__);
++ return -EINVAL;
++ }
++
++ pcd = ep->pcd;
++ if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) {
++ DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n", pcd->gadget.speed);
++ DWC_WARN("%s, bogus device state\n", __func__);
++ return -ESHUTDOWN;
++ }
++
++
++ DWC_DEBUGPL(DBG_PCD, "%s queue req %p, len %d buf %p\n",
++ usb_ep->name, usb_req, usb_req->length, usb_req->buf);
++
++ if (!GET_CORE_IF(pcd)->core_params->opt) {
++ if (ep->dwc_ep.num != 0) {
++ DWC_ERROR("%s queue req %p, len %d buf %p\n",
++ usb_ep->name, usb_req, usb_req->length, usb_req->buf);
++ }
++ }
++
++ SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags);
++
++
++ /**************************************************
++ New add by kaiker ,for DMA mode bug
++ ************************************************/
++ //by kaiker ,for RT3052 USB OTG device mode
++
++ _core_if = GET_CORE_IF(pcd);
++
++ if (_core_if->dma_enable)
++ {
++ usb_req->dma = virt_to_phys((void *)usb_req->buf);
++
++ if(ep->dwc_ep.is_in)
++ {
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24)) || defined(CONFIG_MIPS)
++ if(usb_req->length)
++ dma_cache_wback_inv((unsigned long)usb_req->buf, usb_req->length + 2);
++#endif
++ }
++ }
++
++
++
++#if defined(DEBUG) & defined(VERBOSE)
++ dump_msg(usb_req->buf, usb_req->length);
++#endif
++
++ usb_req->status = -EINPROGRESS;
++ usb_req->actual = 0;
++
++ /*
++ * For EP0 IN without premature status, zlp is required?
++ */
++ if (ep->dwc_ep.num == 0 && ep->dwc_ep.is_in) {
++ DWC_DEBUGPL(DBG_PCDV, "%s-OUT ZLP\n", usb_ep->name);
++ //_req->zero = 1;
++ }
++
++ /* Start the transfer */
++ if (list_empty(&ep->queue) && !ep->stopped) {
++ /* EP0 Transfer? */
++ if (ep->dwc_ep.num == 0) {
++ switch (pcd->ep0state) {
++ case EP0_IN_DATA_PHASE:
++ DWC_DEBUGPL(DBG_PCD,
++ "%s ep0: EP0_IN_DATA_PHASE\n",
++ __func__);
++ break;
++
++ case EP0_OUT_DATA_PHASE:
++ DWC_DEBUGPL(DBG_PCD,
++ "%s ep0: EP0_OUT_DATA_PHASE\n",
++ __func__);
++ if (pcd->request_config) {
++ /* Complete STATUS PHASE */
++ ep->dwc_ep.is_in = 1;
++ pcd->ep0state = EP0_IN_STATUS_PHASE;
++ }
++ break;
++
++ case EP0_IN_STATUS_PHASE:
++ DWC_DEBUGPL(DBG_PCD,
++ "%s ep0: EP0_IN_STATUS_PHASE\n",
++ __func__);
++ break;
++
++ default:
++ DWC_DEBUGPL(DBG_ANY, "ep0: odd state %d\n",
++ pcd->ep0state);
++ SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
++ return -EL2HLT;
++ }
++ ep->dwc_ep.dma_addr = usb_req->dma;
++ ep->dwc_ep.start_xfer_buff = usb_req->buf;
++ ep->dwc_ep.xfer_buff = usb_req->buf;
++ ep->dwc_ep.xfer_len = usb_req->length;
++ ep->dwc_ep.xfer_count = 0;
++ ep->dwc_ep.sent_zlp = 0;
++ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len;
++
++ if(usb_req->zero) {
++ if((ep->dwc_ep.xfer_len % ep->dwc_ep.maxpacket == 0)
++ && (ep->dwc_ep.xfer_len != 0)) {
++ ep->dwc_ep.sent_zlp = 1;
++ }
++
++ }
++
++ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep->dwc_ep);
++ }
++ else {
++
++ uint32_t max_transfer = GET_CORE_IF(ep->pcd)->core_params->max_transfer_size;
++
++ /* Setup and start the Transfer */
++ ep->dwc_ep.dma_addr = usb_req->dma;
++ ep->dwc_ep.start_xfer_buff = usb_req->buf;
++ ep->dwc_ep.xfer_buff = usb_req->buf;
++ ep->dwc_ep.sent_zlp = 0;
++ ep->dwc_ep.total_len = usb_req->length;
++ ep->dwc_ep.xfer_len = 0;
++ ep->dwc_ep.xfer_count = 0;
++
++ if(max_transfer > MAX_TRANSFER_SIZE) {
++ ep->dwc_ep.maxxfer = max_transfer - (max_transfer % ep->dwc_ep.maxpacket);
++ } else {
++ ep->dwc_ep.maxxfer = max_transfer;
++ }
++
++ if(usb_req->zero) {
++ if((ep->dwc_ep.total_len % ep->dwc_ep.maxpacket == 0)
++ && (ep->dwc_ep.total_len != 0)) {
++ ep->dwc_ep.sent_zlp = 1;
++ }
++
++ }
++ dwc_otg_ep_start_transfer(GET_CORE_IF(pcd), &ep->dwc_ep);
++ }
++ }
++
++ if ((req != 0) || prevented) {
++ ++pcd->request_pending;
++ list_add_tail(&req->queue, &ep->queue);
++ if (ep->dwc_ep.is_in && ep->stopped && !(GET_CORE_IF(pcd)->dma_enable)) {
++ /** @todo NGS Create a function for this. */
++ diepmsk_data_t diepmsk = { .d32 = 0};
++ diepmsk.b.intktxfemp = 1;
++ if(&GET_CORE_IF(pcd)->multiproc_int_enable) {
++ dwc_modify_reg32(&GET_CORE_IF(pcd)->dev_if->dev_global_regs->diepeachintmsk[ep->dwc_ep.num],
++ 0, diepmsk.d32);
++ } else {
++ dwc_modify_reg32(&GET_CORE_IF(pcd)->dev_if->dev_global_regs->diepmsk, 0, diepmsk.d32);
++ }
++ }
++ }
++
++ SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
++ return 0;
++}
++
++/**
++ * This function cancels an I/O request from an EP.
++ */
++static int dwc_otg_pcd_ep_dequeue(struct usb_ep *usb_ep,
++ struct usb_request *usb_req)
++{
++ dwc_otg_pcd_request_t *req;
++ dwc_otg_pcd_ep_t *ep;
++ dwc_otg_pcd_t *pcd;
++ unsigned long flags;
++
++ DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p)\n", __func__, usb_ep, usb_req);
++
++ ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
++ if (!usb_ep || !usb_req || (!ep->desc && ep->dwc_ep.num != 0)) {
++ DWC_WARN("%s, bad argument\n", __func__);
++ return -EINVAL;
++ }
++ pcd = ep->pcd;
++ if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) {
++ DWC_WARN("%s, bogus device state\n", __func__);
++ return -ESHUTDOWN;
++ }
++
++ SPIN_LOCK_IRQSAVE(&pcd->lock, flags);
++ DWC_DEBUGPL(DBG_PCDV, "%s %s %s %p\n", __func__, usb_ep->name,
++ ep->dwc_ep.is_in ? "IN" : "OUT",
++ usb_req);
++
++ /* make sure it's actually queued on this endpoint */
++ list_for_each_entry(req, &ep->queue, queue)
++ {
++ if (&req->req == usb_req) {
++ break;
++ }
++ }
++
++ if (&req->req != usb_req) {
++ SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
++ return -EINVAL;
++ }
++
++ if (!list_empty(&req->queue)) {
++ dwc_otg_request_done(ep, req, -ECONNRESET);
++ }
++ else {
++ req = 0;
++ }
++
++ SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
++
++ return req ? 0 : -EOPNOTSUPP;
++}
++
++/**
++ * usb_ep_set_halt stalls an endpoint.
++ *
++ * usb_ep_clear_halt clears an endpoint halt and resets its data
++ * toggle.
++ *
++ * Both of these functions are implemented with the same underlying
++ * function. The behavior depends on the value argument.
++ *
++ * @param[in] usb_ep the Endpoint to halt or clear halt.
++ * @param[in] value
++ * - 0 means clear_halt.
++ * - 1 means set_halt,
++ * - 2 means clear stall lock flag.
++ * - 3 means set stall lock flag.
++ */
++static int dwc_otg_pcd_ep_set_halt(struct usb_ep *usb_ep, int value)
++{
++ int retval = 0;
++ unsigned long flags;
++ dwc_otg_pcd_ep_t *ep = 0;
++
++
++ DWC_DEBUGPL(DBG_PCD,"HALT %s %d\n", usb_ep->name, value);
++
++ ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
++
++ if (!usb_ep || (!ep->desc && ep != &ep->pcd->ep0) ||
++ ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
++ DWC_WARN("%s, bad ep\n", __func__);
++ return -EINVAL;
++ }
++
++ SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags);
++ if (!list_empty(&ep->queue)) {
++ DWC_WARN("%s() %s XFer In process\n", __func__, usb_ep->name);
++ retval = -EAGAIN;
++ }
++ else if (value == 0) {
++ dwc_otg_ep_clear_stall(ep->pcd->otg_dev->core_if,
++ &ep->dwc_ep);
++ }
++ else if(value == 1) {
++ if (ep->dwc_ep.is_in == 1 && ep->pcd->otg_dev->core_if->dma_desc_enable) {
++ dtxfsts_data_t txstatus;
++ fifosize_data_t txfifosize;
++
++ txfifosize.d32 = dwc_read_reg32(&ep->pcd->otg_dev->core_if->core_global_regs->dptxfsiz_dieptxf[ep->dwc_ep.tx_fifo_num]);
++ txstatus.d32 = dwc_read_reg32(&ep->pcd->otg_dev->core_if->dev_if->in_ep_regs[ep->dwc_ep.num]->dtxfsts);
++
++ if(txstatus.b.txfspcavail < txfifosize.b.depth) {
++ DWC_WARN("%s() %s Data In Tx Fifo\n", __func__, usb_ep->name);
++ retval = -EAGAIN;
++ }
++ else {
++ if (ep->dwc_ep.num == 0) {
++ ep->pcd->ep0state = EP0_STALL;
++ }
++
++ ep->stopped = 1;
++ dwc_otg_ep_set_stall(ep->pcd->otg_dev->core_if,
++ &ep->dwc_ep);
++ }
++ }
++ else {
++ if (ep->dwc_ep.num == 0) {
++ ep->pcd->ep0state = EP0_STALL;
++ }
++
++ ep->stopped = 1;
++ dwc_otg_ep_set_stall(ep->pcd->otg_dev->core_if,
++ &ep->dwc_ep);
++ }
++ }
++ else if (value == 2) {
++ ep->dwc_ep.stall_clear_flag = 0;
++ }
++ else if (value == 3) {
++ ep->dwc_ep.stall_clear_flag = 1;
++ }
++
++ SPIN_UNLOCK_IRQRESTORE(&ep->pcd->lock, flags);
++ return retval;
++}
++
++/**
++ * This function allocates a DMA Descriptor chain for the Endpoint
++ * buffer to be used for a transfer to/from the specified endpoint.
++ */
++dwc_otg_dma_desc_t* dwc_otg_ep_alloc_desc_chain(uint32_t * dma_desc_addr, uint32_t count)
++{
++
++ return dma_alloc_coherent(NULL, count * sizeof(dwc_otg_dma_desc_t), dma_desc_addr, GFP_KERNEL);
++}
++
++/**
++ * This function frees a DMA Descriptor chain that was allocated by ep_alloc_desc.
++ */
++void dwc_otg_ep_free_desc_chain(dwc_otg_dma_desc_t* desc_addr, uint32_t dma_desc_addr, uint32_t count)
++{
++ dma_free_coherent(NULL, count * sizeof(dwc_otg_dma_desc_t), desc_addr, dma_desc_addr);
++}
++
++#ifdef DWC_EN_ISOC
++
++/**
++ * This function initializes a descriptor chain for Isochronous transfer
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param dwc_ep The EP to start the transfer on.
++ *
++ */
++void dwc_otg_iso_ep_start_ddma_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *dwc_ep)
++{
++
++ dsts_data_t dsts = { .d32 = 0};
++ depctl_data_t depctl = { .d32 = 0 };
++ volatile uint32_t *addr;
++ int i, j;
++
++ if(dwc_ep->is_in)
++ dwc_ep->desc_cnt = dwc_ep->buf_proc_intrvl / dwc_ep->bInterval;
++ else
++ dwc_ep->desc_cnt = dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / dwc_ep->bInterval;
++
++
++ /** Allocate descriptors for double buffering */
++ dwc_ep->iso_desc_addr = dwc_otg_ep_alloc_desc_chain(&dwc_ep->iso_dma_desc_addr,dwc_ep->desc_cnt*2);
++ if(dwc_ep->desc_addr) {
++ DWC_WARN("%s, can't allocate DMA descriptor chain\n", __func__);
++ return;
++ }
++
++ dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
++
++ /** ISO OUT EP */
++ if(dwc_ep->is_in == 0) {
++ desc_sts_data_t sts = { .d32 =0 };
++ dwc_otg_dma_desc_t* dma_desc = dwc_ep->iso_desc_addr;
++ dma_addr_t dma_ad;
++ uint32_t data_per_desc;
++ dwc_otg_dev_out_ep_regs_t *out_regs =
++ core_if->dev_if->out_ep_regs[dwc_ep->num];
++ int offset;
++
++ addr = &core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl;
++ dma_ad = (dma_addr_t)dwc_read_reg32(&(out_regs->doepdma));
++
++ /** Buffer 0 descriptors setup */
++ dma_ad = dwc_ep->dma_addr0;
++
++ sts.b_iso_out.bs = BS_HOST_READY;
++ sts.b_iso_out.rxsts = 0;
++ sts.b_iso_out.l = 0;
++ sts.b_iso_out.sp = 0;
++ sts.b_iso_out.ioc = 0;
++ sts.b_iso_out.pid = 0;
++ sts.b_iso_out.framenum = 0;
++
++ offset = 0;
++ for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm)
++ {
++
++ for(j = 0; j < dwc_ep->pkt_per_frm; ++j)
++ {
++ data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
++ dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++
++ data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
++ sts.b_iso_out.rxbytes = data_per_desc;
++ writel((uint32_t)dma_ad, &dma_desc->buf);
++ writel(sts.d32, &dma_desc->status);
++
++ offset += data_per_desc;
++ dma_desc ++;
++ (uint32_t)dma_ad += data_per_desc;
++ }
++ }
++
++ for(j = 0; j < dwc_ep->pkt_per_frm - 1; ++j)
++ {
++ data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
++ dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++ data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
++ sts.b_iso_out.rxbytes = data_per_desc;
++ writel((uint32_t)dma_ad, &dma_desc->buf);
++ writel(sts.d32, &dma_desc->status);
++
++ offset += data_per_desc;
++ dma_desc ++;
++ (uint32_t)dma_ad += data_per_desc;
++ }
++
++ sts.b_iso_out.ioc = 1;
++ data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
++ dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++ data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
++ sts.b_iso_out.rxbytes = data_per_desc;
++
++ writel((uint32_t)dma_ad, &dma_desc->buf);
++ writel(sts.d32, &dma_desc->status);
++ dma_desc ++;
++
++ /** Buffer 1 descriptors setup */
++ sts.b_iso_out.ioc = 0;
++ dma_ad = dwc_ep->dma_addr1;
++
++ offset = 0;
++ for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm)
++ {
++ for(j = 0; j < dwc_ep->pkt_per_frm; ++j)
++ {
++ data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
++ dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++ data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
++ sts.b_iso_out.rxbytes = data_per_desc;
++ writel((uint32_t)dma_ad, &dma_desc->buf);
++ writel(sts.d32, &dma_desc->status);
++
++ offset += data_per_desc;
++ dma_desc ++;
++ (uint32_t)dma_ad += data_per_desc;
++ }
++ }
++ for(j = 0; j < dwc_ep->pkt_per_frm - 1; ++j)
++ {
++ data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
++ dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++ data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
++ sts.b_iso_out.rxbytes = data_per_desc;
++ writel((uint32_t)dma_ad, &dma_desc->buf);
++ writel(sts.d32, &dma_desc->status);
++
++ offset += data_per_desc;
++ dma_desc ++;
++ (uint32_t)dma_ad += data_per_desc;
++ }
++
++ sts.b_iso_out.ioc = 1;
++ sts.b_iso_out.l = 1;
++ data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
++ dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++ data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
++ sts.b_iso_out.rxbytes = data_per_desc;
++
++ writel((uint32_t)dma_ad, &dma_desc->buf);
++ writel(sts.d32, &dma_desc->status);
++
++ dwc_ep->next_frame = 0;
++
++ /** Write dma_ad into DOEPDMA register */
++ dwc_write_reg32(&(out_regs->doepdma),(uint32_t)dwc_ep->iso_dma_desc_addr);
++
++ }
++ /** ISO IN EP */
++ else {
++ desc_sts_data_t sts = { .d32 =0 };
++ dwc_otg_dma_desc_t* dma_desc = dwc_ep->iso_desc_addr;
++ dma_addr_t dma_ad;
++ dwc_otg_dev_in_ep_regs_t *in_regs =
++ core_if->dev_if->in_ep_regs[dwc_ep->num];
++ unsigned int frmnumber;
++ fifosize_data_t txfifosize,rxfifosize;
++
++ txfifosize.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[dwc_ep->num]->dtxfsts);
++ rxfifosize.d32 = dwc_read_reg32(&core_if->core_global_regs->grxfsiz);
++
++
++ addr = &core_if->dev_if->in_ep_regs[dwc_ep->num]->diepctl;
++
++ dma_ad = dwc_ep->dma_addr0;
++
++ dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
++
++ sts.b_iso_in.bs = BS_HOST_READY;
++ sts.b_iso_in.txsts = 0;
++ sts.b_iso_in.sp = (dwc_ep->data_per_frame % dwc_ep->maxpacket)? 1 : 0;
++ sts.b_iso_in.ioc = 0;
++ sts.b_iso_in.pid = dwc_ep->pkt_per_frm;
++
++
++ frmnumber = dwc_ep->next_frame;
++
++ sts.b_iso_in.framenum = frmnumber;
++ sts.b_iso_in.txbytes = dwc_ep->data_per_frame;
++ sts.b_iso_in.l = 0;
++
++ /** Buffer 0 descriptors setup */
++ for(i = 0; i < dwc_ep->desc_cnt - 1; i++)
++ {
++ writel((uint32_t)dma_ad, &dma_desc->buf);
++ writel(sts.d32, &dma_desc->status);
++ dma_desc ++;
++
++ (uint32_t)dma_ad += dwc_ep->data_per_frame;
++ sts.b_iso_in.framenum += dwc_ep->bInterval;
++ }
++
++ sts.b_iso_in.ioc = 1;
++ writel((uint32_t)dma_ad, &dma_desc->buf);
++ writel(sts.d32, &dma_desc->status);
++ ++dma_desc;
++
++ /** Buffer 1 descriptors setup */
++ sts.b_iso_in.ioc = 0;
++ dma_ad = dwc_ep->dma_addr1;
++
++ for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm)
++ {
++ writel((uint32_t)dma_ad, &dma_desc->buf);
++ writel(sts.d32, &dma_desc->status);
++ dma_desc ++;
++
++ (uint32_t)dma_ad += dwc_ep->data_per_frame;
++ sts.b_iso_in.framenum += dwc_ep->bInterval;
++
++ sts.b_iso_in.ioc = 0;
++ }
++ sts.b_iso_in.ioc = 1;
++ sts.b_iso_in.l = 1;
++
++ writel((uint32_t)dma_ad, &dma_desc->buf);
++ writel(sts.d32, &dma_desc->status);
++
++ dwc_ep->next_frame = sts.b_iso_in.framenum + dwc_ep->bInterval;
++
++ /** Write dma_ad into diepdma register */
++ dwc_write_reg32(&(in_regs->diepdma),(uint32_t)dwc_ep->iso_dma_desc_addr);
++ }
++ /** Enable endpoint, clear nak */
++ depctl.d32 = 0;
++ depctl.b.epena = 1;
++ depctl.b.usbactep = 1;
++ depctl.b.cnak = 1;
++
++ dwc_modify_reg32(addr, depctl.d32,depctl.d32);
++ depctl.d32 = dwc_read_reg32(addr);
++}
++
++/**
++ * This function initializes a descriptor chain for Isochronous transfer
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ *
++ */
++
++void dwc_otg_iso_ep_start_buf_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++ depctl_data_t depctl = { .d32 = 0 };
++ volatile uint32_t *addr;
++
++
++ if(ep->is_in) {
++ addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
++ } else {
++ addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
++ }
++
++
++ if(core_if->dma_enable == 0 || core_if->dma_desc_enable!= 0) {
++ return;
++ } else {
++ deptsiz_data_t deptsiz = { .d32 = 0 };
++
++ ep->xfer_len = ep->data_per_frame * ep->buf_proc_intrvl / ep->bInterval;
++ ep->pkt_cnt = (ep->xfer_len - 1 + ep->maxpacket) /
++ ep->maxpacket;
++ ep->xfer_count = 0;
++ ep->xfer_buff = (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0;
++ ep->dma_addr = (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0;
++
++ if(ep->is_in) {
++ /* Program the transfer size and packet count
++ * as follows: xfersize = N * maxpacket +
++ * short_packet pktcnt = N + (short_packet
++ * exist ? 1 : 0)
++ */
++ deptsiz.b.mc = ep->pkt_per_frm;
++ deptsiz.b.xfersize = ep->xfer_len;
++ deptsiz.b.pktcnt =
++ (ep->xfer_len - 1 + ep->maxpacket) /
++ ep->maxpacket;
++ dwc_write_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz, deptsiz.d32);
++
++ /* Write the DMA register */
++ dwc_write_reg32 (&(core_if->dev_if->in_ep_regs[ep->num]->diepdma), (uint32_t)ep->dma_addr);
++
++ } else {
++ deptsiz.b.pktcnt =
++ (ep->xfer_len + (ep->maxpacket - 1)) /
++ ep->maxpacket;
++ deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket;
++
++ dwc_write_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doeptsiz, deptsiz.d32);
++
++ /* Write the DMA register */
++ dwc_write_reg32 (&(core_if->dev_if->out_ep_regs[ep->num]->doepdma), (uint32_t)ep->dma_addr);
++
++ }
++ /** Enable endpoint, clear nak */
++ depctl.d32 = 0;
++ dwc_modify_reg32(addr, depctl.d32,depctl.d32);
++
++ depctl.b.epena = 1;
++ depctl.b.cnak = 1;
++
++ dwc_modify_reg32(addr, depctl.d32,depctl.d32);
++ }
++}
++
++
++/**
++ * This function does the setup for a data transfer for an EP and
++ * starts the transfer. For an IN transfer, the packets will be
++ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers,
++ * the packets are unloaded from the Rx FIFO in the ISR. the ISR.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ */
++
++void dwc_otg_iso_ep_start_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++ if(core_if->dma_enable) {
++ if(core_if->dma_desc_enable) {
++ if(ep->is_in) {
++ ep->desc_cnt = ep->pkt_cnt / ep->pkt_per_frm;
++ } else {
++ ep->desc_cnt = ep->pkt_cnt;
++ }
++ dwc_otg_iso_ep_start_ddma_transfer(core_if, ep);
++ } else {
++ if(core_if->pti_enh_enable) {
++ dwc_otg_iso_ep_start_buf_transfer(core_if, ep);
++ } else {
++ ep->cur_pkt_addr = (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0;
++ ep->cur_pkt_dma_addr = (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0;
++ dwc_otg_iso_ep_start_frm_transfer(core_if, ep);
++ }
++ }
++ } else {
++ ep->cur_pkt_addr = (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0;
++ ep->cur_pkt_dma_addr = (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0;
++ dwc_otg_iso_ep_start_frm_transfer(core_if, ep);
++ }
++}
++
++/**
++ * This function does the setup for a data transfer for an EP and
++ * starts the transfer. For an IN transfer, the packets will be
++ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers,
++ * the packets are unloaded from the Rx FIFO in the ISR. the ISR.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ */
++
++void dwc_otg_iso_ep_stop_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++ depctl_data_t depctl = { .d32 = 0 };
++ volatile uint32_t *addr;
++
++ if(ep->is_in == 1) {
++ addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
++ }
++ else {
++ addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
++ }
++
++ /* disable the ep */
++ depctl.d32 = dwc_read_reg32(addr);
++
++ depctl.b.epdis = 1;
++ depctl.b.snak = 1;
++
++ dwc_write_reg32(addr, depctl.d32);
++
++ if(core_if->dma_desc_enable &&
++ ep->iso_desc_addr && ep->iso_dma_desc_addr) {
++ dwc_otg_ep_free_desc_chain(ep->iso_desc_addr,ep->iso_dma_desc_addr,ep->desc_cnt * 2);
++ }
++
++ /* reset varibales */
++ ep->dma_addr0 = 0;
++ ep->dma_addr1 = 0;
++ ep->xfer_buff0 = 0;
++ ep->xfer_buff1 = 0;
++ ep->data_per_frame = 0;
++ ep->data_pattern_frame = 0;
++ ep->sync_frame = 0;
++ ep->buf_proc_intrvl = 0;
++ ep->bInterval = 0;
++ ep->proc_buf_num = 0;
++ ep->pkt_per_frm = 0;
++ ep->pkt_per_frm = 0;
++ ep->desc_cnt = 0;
++ ep->iso_desc_addr = 0;
++ ep->iso_dma_desc_addr = 0;
++}
++
++
++/**
++ * This function is used to submit an ISOC Transfer Request to an EP.
++ *
++ * - Every time a sync period completes the request's completion callback
++ * is called to provide data to the gadget driver.
++ * - Once submitted the request cannot be modified.
++ * - Each request is turned into periodic data packets untill ISO
++ * Transfer is stopped..
++ */
++static int dwc_otg_pcd_iso_ep_start(struct usb_ep *usb_ep, struct usb_iso_request *req,
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++ int gfp_flags
++#else
++ gfp_t gfp_flags
++#endif
++)
++{
++ dwc_otg_pcd_ep_t *ep;
++ dwc_otg_pcd_t *pcd;
++ dwc_ep_t *dwc_ep;
++ unsigned long flags = 0;
++ int32_t frm_data;
++ dwc_otg_core_if_t *core_if;
++ dcfg_data_t dcfg;
++ dsts_data_t dsts;
++
++
++ if (!req || !req->process_buffer || !req->buf0 || !req->buf1) {
++ DWC_WARN("%s, bad params\n", __func__);
++ return -EINVAL;
++ }
++
++ ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
++
++ if (!usb_ep || !ep->desc || ep->dwc_ep.num == 0) {
++ DWC_WARN("%s, bad ep\n", __func__);
++ return -EINVAL;
++ }
++
++ pcd = ep->pcd;
++ core_if = GET_CORE_IF(pcd);
++
++ dcfg.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dcfg);
++
++ if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) {
++ DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n", pcd->gadget.speed);
++ DWC_WARN("%s, bogus device state\n", __func__);
++ return -ESHUTDOWN;
++ }
++
++ SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags);
++
++ dwc_ep = &ep->dwc_ep;
++
++ if(ep->iso_req) {
++ DWC_WARN("%s, iso request in progress\n", __func__);
++ }
++ req->status = -EINPROGRESS;
++
++ dwc_ep->dma_addr0 = req->dma0;
++ dwc_ep->dma_addr1 = req->dma1;
++
++ dwc_ep->xfer_buff0 = req->buf0;
++ dwc_ep->xfer_buff1 = req->buf1;
++
++ ep->iso_req = req;
++
++ dwc_ep->data_per_frame = req->data_per_frame;
++
++ /** @todo - pattern data support is to be implemented in the future */
++ dwc_ep->data_pattern_frame = req->data_pattern_frame;
++ dwc_ep->sync_frame = req->sync_frame;
++
++ dwc_ep->buf_proc_intrvl = req->buf_proc_intrvl;
++
++ dwc_ep->bInterval = 1 << (ep->desc->bInterval - 1);
++
++ dwc_ep->proc_buf_num = 0;
++
++ dwc_ep->pkt_per_frm = 0;
++ frm_data = ep->dwc_ep.data_per_frame;
++ while(frm_data > 0) {
++ dwc_ep->pkt_per_frm++;
++ frm_data -= ep->dwc_ep.maxpacket;
++ }
++
++ dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
++
++ if(req->flags & USB_REQ_ISO_ASAP) {
++ dwc_ep->next_frame = dsts.b.soffn + 1;
++ if(dwc_ep->bInterval != 1){
++ dwc_ep->next_frame = dwc_ep->next_frame + (dwc_ep->bInterval - 1 - dwc_ep->next_frame % dwc_ep->bInterval);
++ }
++ } else {
++ dwc_ep->next_frame = req->start_frame;
++ }
++
++
++ if(!core_if->pti_enh_enable) {
++ dwc_ep->pkt_cnt = dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / dwc_ep->bInterval;
++ } else {
++ dwc_ep->pkt_cnt =
++ (dwc_ep->data_per_frame * (dwc_ep->buf_proc_intrvl / dwc_ep->bInterval)
++ - 1 + dwc_ep->maxpacket) / dwc_ep->maxpacket;
++ }
++
++ if(core_if->dma_desc_enable) {
++ dwc_ep->desc_cnt =
++ dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / dwc_ep->bInterval;
++ }
++
++ dwc_ep->pkt_info = kmalloc(sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt, GFP_KERNEL);
++ if(!dwc_ep->pkt_info) {
++ return -ENOMEM;
++ }
++ if(core_if->pti_enh_enable) {
++ memset(dwc_ep->pkt_info, 0, sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt);
++ }
++
++ dwc_ep->cur_pkt = 0;
++
++ SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
++
++ dwc_otg_iso_ep_start_transfer(core_if, dwc_ep);
++
++ return 0;
++}
++
++/**
++ * This function stops ISO EP Periodic Data Transfer.
++ */
++static int dwc_otg_pcd_iso_ep_stop(struct usb_ep *usb_ep, struct usb_iso_request *req)
++{
++ dwc_otg_pcd_ep_t *ep;
++ dwc_otg_pcd_t *pcd;
++ dwc_ep_t *dwc_ep;
++ unsigned long flags;
++
++ ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
++
++ if (!usb_ep || !ep->desc || ep->dwc_ep.num == 0) {
++ DWC_WARN("%s, bad ep\n", __func__);
++ return -EINVAL;
++ }
++
++ pcd = ep->pcd;
++
++ if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) {
++ DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n", pcd->gadget.speed);
++ DWC_WARN("%s, bogus device state\n", __func__);
++ return -ESHUTDOWN;
++ }
++
++ dwc_ep = &ep->dwc_ep;
++
++ dwc_otg_iso_ep_stop_transfer(GET_CORE_IF(pcd), dwc_ep);
++
++ kfree(dwc_ep->pkt_info);
++
++ SPIN_LOCK_IRQSAVE(&pcd->lock, flags);
++
++ if(ep->iso_req != req) {
++ return -EINVAL;
++ }
++
++ req->status = -ECONNRESET;
++
++ SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
++
++
++ ep->iso_req = 0;
++
++ return 0;
++}
++
++/**
++ * This function is used for perodical data exchnage between PCD and gadget drivers.
++ * for Isochronous EPs
++ *
++ * - Every time a sync period completes this function is called to
++ * perform data exchange between PCD and gadget
++ */
++void dwc_otg_iso_buffer_done(dwc_otg_pcd_ep_t *ep, dwc_otg_pcd_iso_request_t *req)
++{
++ int i;
++ struct usb_gadget_iso_packet_descriptor *iso_packet;
++ dwc_ep_t *dwc_ep;
++
++ dwc_ep = &ep->dwc_ep;
++
++ if(ep->iso_req->status == -ECONNRESET) {
++ DWC_PRINT("Device has already disconnected\n");
++ /*Device has been disconnected*/
++ return;
++ }
++
++ if(dwc_ep->proc_buf_num != 0) {
++ iso_packet = ep->iso_req->iso_packet_desc0;
++ }
++
++ else {
++ iso_packet = ep->iso_req->iso_packet_desc1;
++ }
++
++ /* Fill in ISOC packets descriptors & pass to gadget driver*/
++
++ for(i = 0; i < dwc_ep->pkt_cnt; ++i) {
++ iso_packet[i].status = dwc_ep->pkt_info[i].status;
++ iso_packet[i].offset = dwc_ep->pkt_info[i].offset;
++ iso_packet[i].actual_length = dwc_ep->pkt_info[i].length;
++ dwc_ep->pkt_info[i].status = 0;
++ dwc_ep->pkt_info[i].offset = 0;
++ dwc_ep->pkt_info[i].length = 0;
++ }
++
++ /* Call callback function to process data buffer */
++ ep->iso_req->status = 0;/* success */
++
++ SPIN_UNLOCK(&ep->pcd->lock);
++ ep->iso_req->process_buffer(&ep->ep, ep->iso_req);
++ SPIN_LOCK(&ep->pcd->lock);
++}
++
++
++static struct usb_iso_request *dwc_otg_pcd_alloc_iso_request(struct usb_ep *ep,int packets,
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++ int gfp_flags
++#else
++ gfp_t gfp_flags
++#endif
++)
++{
++ struct usb_iso_request *pReq = NULL;
++ uint32_t req_size;
++
++
++ req_size = sizeof(struct usb_iso_request);
++ req_size += (2 * packets * (sizeof(struct usb_gadget_iso_packet_descriptor)));
++
++
++ pReq = kmalloc(req_size, gfp_flags);
++ if (!pReq) {
++ DWC_WARN("%s, can't allocate Iso Request\n", __func__);
++ return 0;
++ }
++ pReq->iso_packet_desc0 = (void*) (pReq + 1);
++
++ pReq->iso_packet_desc1 = pReq->iso_packet_desc0 + packets;
++
++ return pReq;
++}
++
++static void dwc_otg_pcd_free_iso_request(struct usb_ep *ep, struct usb_iso_request *req)
++{
++ kfree(req);
++}
++
++static struct usb_isoc_ep_ops dwc_otg_pcd_ep_ops =
++{
++ .ep_ops =
++ {
++ .enable = dwc_otg_pcd_ep_enable,
++ .disable = dwc_otg_pcd_ep_disable,
++
++ .alloc_request = dwc_otg_pcd_alloc_request,
++ .free_request = dwc_otg_pcd_free_request,
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23)
++ .alloc_buffer = dwc_otg_pcd_alloc_buffer,
++ .free_buffer = dwc_otg_pcd_free_buffer,
++#endif
++
++ .queue = dwc_otg_pcd_ep_queue,
++ .dequeue = dwc_otg_pcd_ep_dequeue,
++
++ .set_halt = dwc_otg_pcd_ep_set_halt,
++ .fifo_status = 0,
++ .fifo_flush = 0,
++ },
++ .iso_ep_start = dwc_otg_pcd_iso_ep_start,
++ .iso_ep_stop = dwc_otg_pcd_iso_ep_stop,
++ .alloc_iso_request = dwc_otg_pcd_alloc_iso_request,
++ .free_iso_request = dwc_otg_pcd_free_iso_request,
++};
++
++#else
++
++
++static struct usb_ep_ops dwc_otg_pcd_ep_ops =
++{
++ .enable = dwc_otg_pcd_ep_enable,
++ .disable = dwc_otg_pcd_ep_disable,
++
++ .alloc_request = dwc_otg_pcd_alloc_request,
++ .free_request = dwc_otg_pcd_free_request,
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23)
++ .alloc_buffer = dwc_otg_pcd_alloc_buffer,
++ .free_buffer = dwc_otg_pcd_free_buffer,
++#endif
++
++ .queue = dwc_otg_pcd_ep_queue,
++ .dequeue = dwc_otg_pcd_ep_dequeue,
++
++ .set_halt = dwc_otg_pcd_ep_set_halt,
++ .fifo_status = 0,
++ .fifo_flush = 0,
++
++
++};
++
++#endif /* DWC_EN_ISOC */
++/* Gadget Operations */
++/**
++ * The following gadget operations will be implemented in the DWC_otg
++ * PCD. Functions in the API that are not described below are not
++ * implemented.
++ *
++ * The Gadget API provides wrapper functions for each of the function
++ * pointers defined in usb_gadget_ops. The Gadget Driver calls the
++ * wrapper function, which then calls the underlying PCD function. The
++ * following sections are named according to the wrapper functions
++ * (except for ioctl, which doesn't have a wrapper function). Within
++ * each section, the corresponding DWC_otg PCD function name is
++ * specified.
++ *
++ */
++
++/**
++ *Gets the USB Frame number of the last SOF.
++ */
++static int dwc_otg_pcd_get_frame(struct usb_gadget *gadget)
++{
++ dwc_otg_pcd_t *pcd;
++
++ DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, gadget);
++
++ if (gadget == 0) {
++ return -ENODEV;
++ }
++ else {
++ pcd = container_of(gadget, dwc_otg_pcd_t, gadget);
++ dwc_otg_get_frame_number(GET_CORE_IF(pcd));
++ }
++
++ return 0;
++}
++
++void dwc_otg_pcd_initiate_srp(dwc_otg_pcd_t *pcd)
++{
++ uint32_t *addr = (uint32_t *)&(GET_CORE_IF(pcd)->core_global_regs->gotgctl);
++ gotgctl_data_t mem;
++ gotgctl_data_t val;
++
++ val.d32 = dwc_read_reg32(addr);
++ if (val.b.sesreq) {
++ DWC_ERROR("Session Request Already active!\n");
++ return;
++ }
++
++ DWC_NOTICE("Session Request Initated\n");
++ mem.d32 = dwc_read_reg32(addr);
++ mem.b.sesreq = 1;
++ dwc_write_reg32(addr, mem.d32);
++
++ /* Start the SRP timer */
++ dwc_otg_pcd_start_srp_timer(pcd);
++ return;
++}
++
++void dwc_otg_pcd_remote_wakeup(dwc_otg_pcd_t *pcd, int set)
++{
++ dctl_data_t dctl = {.d32=0};
++ volatile uint32_t *addr = &(GET_CORE_IF(pcd)->dev_if->dev_global_regs->dctl);
++
++ if (dwc_otg_is_device_mode(GET_CORE_IF(pcd))) {
++ if (pcd->remote_wakeup_enable) {
++ if (set) {
++ dctl.b.rmtwkupsig = 1;
++ dwc_modify_reg32(addr, 0, dctl.d32);
++ DWC_DEBUGPL(DBG_PCD, "Set Remote Wakeup\n");
++ mdelay(1);
++ dwc_modify_reg32(addr, dctl.d32, 0);
++ DWC_DEBUGPL(DBG_PCD, "Clear Remote Wakeup\n");
++ }
++ else {
++ }
++ }
++ else {
++ DWC_DEBUGPL(DBG_PCD, "Remote Wakeup is disabled\n");
++ }
++ }
++ return;
++}
++
++/**
++ * Initiates Session Request Protocol (SRP) to wakeup the host if no
++ * session is in progress. If a session is already in progress, but
++ * the device is suspended, remote wakeup signaling is started.
++ *
++ */
++static int dwc_otg_pcd_wakeup(struct usb_gadget *gadget)
++{
++ unsigned long flags;
++ dwc_otg_pcd_t *pcd;
++ dsts_data_t dsts;
++ gotgctl_data_t gotgctl;
++
++ DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, gadget);
++
++ if (gadget == 0) {
++ return -ENODEV;
++ }
++ else {
++ pcd = container_of(gadget, dwc_otg_pcd_t, gadget);
++ }
++ SPIN_LOCK_IRQSAVE(&pcd->lock, flags);
++
++ /*
++ * This function starts the Protocol if no session is in progress. If
++ * a session is already in progress, but the device is suspended,
++ * remote wakeup signaling is started.
++ */
++
++ /* Check if valid session */
++ gotgctl.d32 = dwc_read_reg32(&(GET_CORE_IF(pcd)->core_global_regs->gotgctl));
++ if (gotgctl.b.bsesvld) {
++ /* Check if suspend state */
++ dsts.d32 = dwc_read_reg32(&(GET_CORE_IF(pcd)->dev_if->dev_global_regs->dsts));
++ if (dsts.b.suspsts) {
++ dwc_otg_pcd_remote_wakeup(pcd, 1);
++ }
++ }
++ else {
++ dwc_otg_pcd_initiate_srp(pcd);
++ }
++
++ SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
++ return 0;
++}
++
++static const struct usb_gadget_ops dwc_otg_pcd_ops =
++{
++ .get_frame = dwc_otg_pcd_get_frame,
++ .wakeup = dwc_otg_pcd_wakeup,
++ // current versions must always be self-powered
++};
++
++/**
++ * This function updates the otg values in the gadget structure.
++ */
++void dwc_otg_pcd_update_otg(dwc_otg_pcd_t *pcd, const unsigned reset)
++{
++
++ if (!pcd->gadget.is_otg)
++ return;
++
++ if (reset) {
++ pcd->b_hnp_enable = 0;
++ pcd->a_hnp_support = 0;
++ pcd->a_alt_hnp_support = 0;
++ }
++
++ pcd->gadget.b_hnp_enable = pcd->b_hnp_enable;
++ pcd->gadget.a_hnp_support = pcd->a_hnp_support;
++ pcd->gadget.a_alt_hnp_support = pcd->a_alt_hnp_support;
++}
++
++/**
++ * This function is the top level PCD interrupt handler.
++ */
++static irqreturn_t dwc_otg_pcd_irq(int irq, void *dev
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19)
++ , struct pt_regs *r
++#endif
++ )
++{
++ dwc_otg_pcd_t *pcd = dev;
++ int32_t retval = IRQ_NONE;
++
++ retval = dwc_otg_pcd_handle_intr(pcd);
++ return IRQ_RETVAL(retval);
++}
++
++/**
++ * PCD Callback function for initializing the PCD when switching to
++ * device mode.
++ *
++ * @param p void pointer to the <code>dwc_otg_pcd_t</code>
++ */
++static int32_t dwc_otg_pcd_start_cb(void *p)
++{
++ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)p;
++
++ /*
++ * Initialized the Core for Device mode.
++ */
++ if (dwc_otg_is_device_mode(GET_CORE_IF(pcd))) {
++ dwc_otg_core_dev_init(GET_CORE_IF(pcd));
++ }
++ return 1;
++}
++
++/**
++ * PCD Callback function for stopping the PCD when switching to Host
++ * mode.
++ *
++ * @param p void pointer to the <code>dwc_otg_pcd_t</code>
++ */
++static int32_t dwc_otg_pcd_stop_cb(void *p)
++{
++ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)p;
++ extern void dwc_otg_pcd_stop(dwc_otg_pcd_t *_pcd);
++
++ dwc_otg_pcd_stop(pcd);
++ return 1;
++}
++
++
++/**
++ * PCD Callback function for notifying the PCD when resuming from
++ * suspend.
++ *
++ * @param p void pointer to the <code>dwc_otg_pcd_t</code>
++ */
++static int32_t dwc_otg_pcd_suspend_cb(void *p)
++{
++ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)p;
++
++ if (pcd->driver && pcd->driver->resume) {
++ SPIN_UNLOCK(&pcd->lock);
++ pcd->driver->suspend(&pcd->gadget);
++ SPIN_LOCK(&pcd->lock);
++ }
++
++ return 1;
++}
++
++
++/**
++ * PCD Callback function for notifying the PCD when resuming from
++ * suspend.
++ *
++ * @param p void pointer to the <code>dwc_otg_pcd_t</code>
++ */
++static int32_t dwc_otg_pcd_resume_cb(void *p)
++{
++ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)p;
++
++ if (pcd->driver && pcd->driver->resume) {
++ SPIN_UNLOCK(&pcd->lock);
++ pcd->driver->resume(&pcd->gadget);
++ SPIN_LOCK(&pcd->lock);
++ }
++
++ /* Stop the SRP timeout timer. */
++ if ((GET_CORE_IF(pcd)->core_params->phy_type != DWC_PHY_TYPE_PARAM_FS) ||
++ (!GET_CORE_IF(pcd)->core_params->i2c_enable)) {
++ if (GET_CORE_IF(pcd)->srp_timer_started) {
++ GET_CORE_IF(pcd)->srp_timer_started = 0;
++ del_timer(&pcd->srp_timer);
++ }
++ }
++ return 1;
++}
++
++
++/**
++ * PCD Callback structure for handling mode switching.
++ */
++static dwc_otg_cil_callbacks_t pcd_callbacks =
++{
++ .start = dwc_otg_pcd_start_cb,
++ .stop = dwc_otg_pcd_stop_cb,
++ .suspend = dwc_otg_pcd_suspend_cb,
++ .resume_wakeup = dwc_otg_pcd_resume_cb,
++ .p = 0, /* Set at registration */
++};
++
++/**
++ * This function is called when the SRP timer expires. The SRP should
++ * complete within 6 seconds.
++ */
++static void srp_timeout(unsigned long ptr)
++{
++ gotgctl_data_t gotgctl;
++ dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *)ptr;
++ volatile uint32_t *addr = &core_if->core_global_regs->gotgctl;
++
++ gotgctl.d32 = dwc_read_reg32(addr);
++
++ core_if->srp_timer_started = 0;
++
++ if ((core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS) &&
++ (core_if->core_params->i2c_enable)) {
++ DWC_PRINT("SRP Timeout\n");
++
++ if ((core_if->srp_success) &&
++ (gotgctl.b.bsesvld)) {
++ if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) {
++ core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p);
++ }
++
++ /* Clear Session Request */
++ gotgctl.d32 = 0;
++ gotgctl.b.sesreq = 1;
++ dwc_modify_reg32(&core_if->core_global_regs->gotgctl,
++ gotgctl.d32, 0);
++
++ core_if->srp_success = 0;
++ }
++ else {
++ DWC_ERROR("Device not connected/responding\n");
++ gotgctl.b.sesreq = 0;
++ dwc_write_reg32(addr, gotgctl.d32);
++ }
++ }
++ else if (gotgctl.b.sesreq) {
++ DWC_PRINT("SRP Timeout\n");
++
++ DWC_ERROR("Device not connected/responding\n");
++ gotgctl.b.sesreq = 0;
++ dwc_write_reg32(addr, gotgctl.d32);
++ }
++ else {
++ DWC_PRINT(" SRP GOTGCTL=%0x\n", gotgctl.d32);
++ }
++}
++
++/**
++ * Start the SRP timer to detect when the SRP does not complete within
++ * 6 seconds.
++ *
++ * @param pcd the pcd structure.
++ */
++void dwc_otg_pcd_start_srp_timer(dwc_otg_pcd_t *pcd)
++{
++ struct timer_list *srp_timer = &pcd->srp_timer;
++ GET_CORE_IF(pcd)->srp_timer_started = 1;
++ init_timer(srp_timer);
++ srp_timer->function = srp_timeout;
++ srp_timer->data = (unsigned long)GET_CORE_IF(pcd);
++ srp_timer->expires = jiffies + (HZ*6);
++ add_timer(srp_timer);
++}
++
++/**
++ * Tasklet
++ *
++ */
++extern void start_next_request(dwc_otg_pcd_ep_t *ep);
++
++static void start_xfer_tasklet_func (unsigned long data)
++{
++ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t*)data;
++ dwc_otg_core_if_t *core_if = pcd->otg_dev->core_if;
++
++ int i;
++ depctl_data_t diepctl;
++
++ DWC_DEBUGPL(DBG_PCDV, "Start xfer tasklet\n");
++
++ diepctl.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[0]->diepctl);
++
++ if (pcd->ep0.queue_sof) {
++ pcd->ep0.queue_sof = 0;
++ start_next_request (&pcd->ep0);
++ // break;
++ }
++
++ for (i=0; i<core_if->dev_if->num_in_eps; i++)
++ {
++ depctl_data_t diepctl;
++ diepctl.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[i]->diepctl);
++
++ if (pcd->in_ep[i].queue_sof) {
++ pcd->in_ep[i].queue_sof = 0;
++ start_next_request (&pcd->in_ep[i]);
++ // break;
++ }
++ }
++
++ return;
++}
++
++
++
++
++
++
++
++static struct tasklet_struct start_xfer_tasklet = {
++ .next = NULL,
++ .state = 0,
++ .count = ATOMIC_INIT(0),
++ .func = start_xfer_tasklet_func,
++ .data = 0,
++};
++/**
++ * This function initialized the pcd Dp structures to there default
++ * state.
++ *
++ * @param pcd the pcd structure.
++ */
++void dwc_otg_pcd_reinit(dwc_otg_pcd_t *pcd)
++{
++ static const char * names[] =
++ {
++
++ "ep0",
++ "ep1in",
++ "ep2in",
++ "ep3in",
++ "ep4in",
++ "ep5in",
++ "ep6in",
++ "ep7in",
++ "ep8in",
++ "ep9in",
++ "ep10in",
++ "ep11in",
++ "ep12in",
++ "ep13in",
++ "ep14in",
++ "ep15in",
++ "ep1out",
++ "ep2out",
++ "ep3out",
++ "ep4out",
++ "ep5out",
++ "ep6out",
++ "ep7out",
++ "ep8out",
++ "ep9out",
++ "ep10out",
++ "ep11out",
++ "ep12out",
++ "ep13out",
++ "ep14out",
++ "ep15out"
++
++ };
++
++ int i;
++ int in_ep_cntr, out_ep_cntr;
++ uint32_t hwcfg1;
++ uint32_t num_in_eps = (GET_CORE_IF(pcd))->dev_if->num_in_eps;
++ uint32_t num_out_eps = (GET_CORE_IF(pcd))->dev_if->num_out_eps;
++ dwc_otg_pcd_ep_t *ep;
++
++ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, pcd);
++
++ INIT_LIST_HEAD (&pcd->gadget.ep_list);
++ pcd->gadget.ep0 = &pcd->ep0.ep;
++ pcd->gadget.speed = USB_SPEED_UNKNOWN;
++
++ INIT_LIST_HEAD (&pcd->gadget.ep0->ep_list);
++
++ /**
++ * Initialize the EP0 structure.
++ */
++ ep = &pcd->ep0;
++
++ /* Init EP structure */
++ ep->desc = 0;
++ ep->pcd = pcd;
++ ep->stopped = 1;
++
++ /* Init DWC ep structure */
++ ep->dwc_ep.num = 0;
++ ep->dwc_ep.active = 0;
++ ep->dwc_ep.tx_fifo_num = 0;
++ /* Control until ep is actvated */
++ ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
++ ep->dwc_ep.maxpacket = MAX_PACKET_SIZE;
++ ep->dwc_ep.dma_addr = 0;
++ ep->dwc_ep.start_xfer_buff = 0;
++ ep->dwc_ep.xfer_buff = 0;
++ ep->dwc_ep.xfer_len = 0;
++ ep->dwc_ep.xfer_count = 0;
++ ep->dwc_ep.sent_zlp = 0;
++ ep->dwc_ep.total_len = 0;
++ ep->queue_sof = 0;
++ ep->dwc_ep.desc_addr = 0;
++ ep->dwc_ep.dma_desc_addr = 0;
++
++
++ /* Init the usb_ep structure. */
++ ep->ep.name = names[0];
++ ep->ep.ops = (struct usb_ep_ops*)&dwc_otg_pcd_ep_ops;
++
++ /**
++ * @todo NGS: What should the max packet size be set to
++ * here? Before EP type is set?
++ */
++ ep->ep.maxpacket = MAX_PACKET_SIZE;
++
++ list_add_tail (&ep->ep.ep_list, &pcd->gadget.ep_list);
++
++ INIT_LIST_HEAD (&ep->queue);
++ /**
++ * Initialize the EP structures.
++ */
++ in_ep_cntr = 0;
++ hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1.d32 >> 3;
++
++ for (i = 1; in_ep_cntr < num_in_eps; i++)
++ {
++ if((hwcfg1 & 0x1) == 0) {
++ dwc_otg_pcd_ep_t *ep = &pcd->in_ep[in_ep_cntr];
++ in_ep_cntr ++;
++
++ /* Init EP structure */
++ ep->desc = 0;
++ ep->pcd = pcd;
++ ep->stopped = 1;
++
++ /* Init DWC ep structure */
++ ep->dwc_ep.is_in = 1;
++ ep->dwc_ep.num = i;
++ ep->dwc_ep.active = 0;
++ ep->dwc_ep.tx_fifo_num = 0;
++
++ /* Control until ep is actvated */
++ ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
++ ep->dwc_ep.maxpacket = MAX_PACKET_SIZE;
++ ep->dwc_ep.dma_addr = 0;
++ ep->dwc_ep.start_xfer_buff = 0;
++ ep->dwc_ep.xfer_buff = 0;
++ ep->dwc_ep.xfer_len = 0;
++ ep->dwc_ep.xfer_count = 0;
++ ep->dwc_ep.sent_zlp = 0;
++ ep->dwc_ep.total_len = 0;
++ ep->queue_sof = 0;
++ ep->dwc_ep.desc_addr = 0;
++ ep->dwc_ep.dma_desc_addr = 0;
++
++ /* Init the usb_ep structure. */
++ ep->ep.name = names[i];
++ ep->ep.ops = (struct usb_ep_ops*)&dwc_otg_pcd_ep_ops;
++
++ /**
++ * @todo NGS: What should the max packet size be set to
++ * here? Before EP type is set?
++ */
++ ep->ep.maxpacket = MAX_PACKET_SIZE;
++
++ list_add_tail (&ep->ep.ep_list, &pcd->gadget.ep_list);
++
++ INIT_LIST_HEAD (&ep->queue);
++ }
++ hwcfg1 >>= 2;
++ }
++
++ out_ep_cntr = 0;
++ hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1.d32 >> 2;
++
++ for (i = 1; out_ep_cntr < num_out_eps; i++)
++ {
++ if((hwcfg1 & 0x1) == 0) {
++ dwc_otg_pcd_ep_t *ep = &pcd->out_ep[out_ep_cntr];
++ out_ep_cntr++;
++
++ /* Init EP structure */
++ ep->desc = 0;
++ ep->pcd = pcd;
++ ep->stopped = 1;
++
++ /* Init DWC ep structure */
++ ep->dwc_ep.is_in = 0;
++ ep->dwc_ep.num = i;
++ ep->dwc_ep.active = 0;
++ ep->dwc_ep.tx_fifo_num = 0;
++ /* Control until ep is actvated */
++ ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
++ ep->dwc_ep.maxpacket = MAX_PACKET_SIZE;
++ ep->dwc_ep.dma_addr = 0;
++ ep->dwc_ep.start_xfer_buff = 0;
++ ep->dwc_ep.xfer_buff = 0;
++ ep->dwc_ep.xfer_len = 0;
++ ep->dwc_ep.xfer_count = 0;
++ ep->dwc_ep.sent_zlp = 0;
++ ep->dwc_ep.total_len = 0;
++ ep->queue_sof = 0;
++
++ /* Init the usb_ep structure. */
++ ep->ep.name = names[15 + i];
++ ep->ep.ops = (struct usb_ep_ops*)&dwc_otg_pcd_ep_ops;
++ /**
++ * @todo NGS: What should the max packet size be set to
++ * here? Before EP type is set?
++ */
++ ep->ep.maxpacket = MAX_PACKET_SIZE;
++
++ list_add_tail (&ep->ep.ep_list, &pcd->gadget.ep_list);
++
++ INIT_LIST_HEAD (&ep->queue);
++ }
++ hwcfg1 >>= 2;
++ }
++
++ /* remove ep0 from the list. There is a ep0 pointer.*/
++ list_del_init (&pcd->ep0.ep.ep_list);
++
++ pcd->ep0state = EP0_DISCONNECT;
++ pcd->ep0.ep.maxpacket = MAX_EP0_SIZE;
++ pcd->ep0.dwc_ep.maxpacket = MAX_EP0_SIZE;
++ pcd->ep0.dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
++}
++
++/**
++ * This function releases the Gadget device.
++ * required by device_unregister().
++ *
++ * @todo Should this do something? Should it free the PCD?
++ */
++static void dwc_otg_pcd_gadget_release(struct device *dev)
++{
++ DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, dev);
++}
++
++
++
++/**
++ * This function initialized the PCD portion of the driver.
++ *
++ */
++
++int dwc_otg_pcd_init(struct device *dev)
++{
++ static char pcd_name[] = "dwc_otg_pcd";
++ dwc_otg_pcd_t *pcd;
++ dwc_otg_core_if_t* core_if;
++ dwc_otg_dev_if_t* dev_if;
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(dev);
++ int retval = 0;
++
++
++ DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n",__func__, dev);
++ /*
++ * Allocate PCD structure
++ */
++ pcd = kmalloc(sizeof(dwc_otg_pcd_t), GFP_KERNEL);
++
++ if (pcd == 0) {
++ return -ENOMEM;
++ }
++
++ memset(pcd, 0, sizeof(dwc_otg_pcd_t));
++ spin_lock_init(&pcd->lock);
++
++ otg_dev->pcd = pcd;
++ s_pcd = pcd;
++ pcd->gadget.name = pcd_name;
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30)
++ strcpy(pcd->gadget.dev.bus_id, "gadget");
++#else
++ dev_set_name(&pcd->gadget.dev, "%s", "gadget");
++#endif
++
++ pcd->otg_dev = dev_get_drvdata(dev);
++
++ pcd->gadget.dev.parent = dev;
++ pcd->gadget.dev.release = dwc_otg_pcd_gadget_release;
++ pcd->gadget.ops = &dwc_otg_pcd_ops;
++
++ core_if = GET_CORE_IF(pcd);
++ dev_if = core_if->dev_if;
++
++ if(core_if->hwcfg4.b.ded_fifo_en) {
++ DWC_PRINT("Dedicated Tx FIFOs mode\n");
++ }
++ else {
++ DWC_PRINT("Shared Tx FIFO mode\n");
++ }
++
++ /* If the module is set to FS or if the PHY_TYPE is FS then the gadget
++ * should not report as dual-speed capable. replace the following line
++ * with the block of code below it once the software is debugged for
++ * this. If is_dualspeed = 0 then the gadget driver should not report
++ * a device qualifier descriptor when queried. */
++ if ((GET_CORE_IF(pcd)->core_params->speed == DWC_SPEED_PARAM_FULL) ||
++ ((GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == 2) &&
++ (GET_CORE_IF(pcd)->hwcfg2.b.fs_phy_type == 1) &&
++ (GET_CORE_IF(pcd)->core_params->ulpi_fs_ls))) {
++ pcd->gadget.is_dualspeed = 0;
++ }
++ else {
++ pcd->gadget.is_dualspeed = 1;
++ }
++
++ if ((otg_dev->core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE) ||
++ (otg_dev->core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST) ||
++ (otg_dev->core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) ||
++ (otg_dev->core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) {
++ pcd->gadget.is_otg = 0;
++ }
++ else {
++ pcd->gadget.is_otg = 1;
++ }
++
++
++ pcd->driver = 0;
++ /* Register the gadget device */
++ retval = device_register(&pcd->gadget.dev);
++ if (retval != 0) {
++ kfree (pcd);
++ return retval;
++ }
++
++
++ /*
++ * Initialized the Core for Device mode.
++ */
++ if (dwc_otg_is_device_mode(core_if)) {
++ dwc_otg_core_dev_init(core_if);
++ }
++
++ /*
++ * Initialize EP structures
++ */
++ dwc_otg_pcd_reinit(pcd);
++
++ /*
++ * Register the PCD Callbacks.
++ */
++ dwc_otg_cil_register_pcd_callbacks(otg_dev->core_if, &pcd_callbacks,
++ pcd);
++ /*
++ * Setup interupt handler
++ */
++ DWC_DEBUGPL(DBG_ANY, "registering handler for irq%d\n", otg_dev->irq);
++ retval = request_irq(otg_dev->irq, dwc_otg_pcd_irq,
++ IRQF_SHARED, pcd->gadget.name, pcd);
++ if (retval != 0) {
++ DWC_ERROR("request of irq%d failed\n", otg_dev->irq);
++ device_unregister(&pcd->gadget.dev);
++ kfree (pcd);
++ return -EBUSY;
++ }
++
++ /*
++ * Initialize the DMA buffer for SETUP packets
++ */
++ if (GET_CORE_IF(pcd)->dma_enable) {
++ pcd->setup_pkt = dma_alloc_coherent (NULL, sizeof (*pcd->setup_pkt) * 5, &pcd->setup_pkt_dma_handle, 0);
++ if (pcd->setup_pkt == 0) {
++ free_irq(otg_dev->irq, pcd);
++ device_unregister(&pcd->gadget.dev);
++ kfree (pcd);
++ return -ENOMEM;
++ }
++
++ pcd->status_buf = dma_alloc_coherent (NULL, sizeof (uint16_t), &pcd->status_buf_dma_handle, 0);
++ if (pcd->status_buf == 0) {
++ dma_free_coherent(NULL, sizeof(*pcd->setup_pkt), pcd->setup_pkt, pcd->setup_pkt_dma_handle);
++ free_irq(otg_dev->irq, pcd);
++ device_unregister(&pcd->gadget.dev);
++ kfree (pcd);
++ return -ENOMEM;
++ }
++
++ if (GET_CORE_IF(pcd)->dma_desc_enable) {
++ dev_if->setup_desc_addr[0] = dwc_otg_ep_alloc_desc_chain(&dev_if->dma_setup_desc_addr[0], 1);
++ dev_if->setup_desc_addr[1] = dwc_otg_ep_alloc_desc_chain(&dev_if->dma_setup_desc_addr[1], 1);
++ dev_if->in_desc_addr = dwc_otg_ep_alloc_desc_chain(&dev_if->dma_in_desc_addr, 1);
++ dev_if->out_desc_addr = dwc_otg_ep_alloc_desc_chain(&dev_if->dma_out_desc_addr, 1);
++
++ if(dev_if->setup_desc_addr[0] == 0
++ || dev_if->setup_desc_addr[1] == 0
++ || dev_if->in_desc_addr == 0
++ || dev_if->out_desc_addr == 0 ) {
++
++ if(dev_if->out_desc_addr)
++ dwc_otg_ep_free_desc_chain(dev_if->out_desc_addr, dev_if->dma_out_desc_addr, 1);
++ if(dev_if->in_desc_addr)
++ dwc_otg_ep_free_desc_chain(dev_if->in_desc_addr, dev_if->dma_in_desc_addr, 1);
++ if(dev_if->setup_desc_addr[1])
++ dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[1], dev_if->dma_setup_desc_addr[1], 1);
++ if(dev_if->setup_desc_addr[0])
++ dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[0], dev_if->dma_setup_desc_addr[0], 1);
++
++
++ dma_free_coherent(NULL, sizeof(*pcd->status_buf), pcd->status_buf, pcd->setup_pkt_dma_handle);
++ dma_free_coherent(NULL, sizeof(*pcd->setup_pkt), pcd->setup_pkt, pcd->setup_pkt_dma_handle);
++
++ free_irq(otg_dev->irq, pcd);
++ device_unregister(&pcd->gadget.dev);
++ kfree (pcd);
++
++ return -ENOMEM;
++ }
++ }
++ }
++ else {
++ pcd->setup_pkt = kmalloc (sizeof (*pcd->setup_pkt) * 5, GFP_KERNEL);
++ if (pcd->setup_pkt == 0) {
++ free_irq(otg_dev->irq, pcd);
++ device_unregister(&pcd->gadget.dev);
++ kfree (pcd);
++ return -ENOMEM;
++ }
++
++ pcd->status_buf = kmalloc (sizeof (uint16_t), GFP_KERNEL);
++ if (pcd->status_buf == 0) {
++ kfree(pcd->setup_pkt);
++ free_irq(otg_dev->irq, pcd);
++ device_unregister(&pcd->gadget.dev);
++ kfree (pcd);
++ return -ENOMEM;
++ }
++ }
++
++
++ /* Initialize tasklet */
++ start_xfer_tasklet.data = (unsigned long)pcd;
++ pcd->start_xfer_tasklet = &start_xfer_tasklet;
++
++ return 0;
++}
++
++/**
++ * Cleanup the PCD.
++ */
++void dwc_otg_pcd_remove(struct device *dev)
++{
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(dev);
++ dwc_otg_pcd_t *pcd = otg_dev->pcd;
++ dwc_otg_dev_if_t* dev_if = GET_CORE_IF(pcd)->dev_if;
++
++ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, dev);
++
++ /*
++ * Free the IRQ
++ */
++ free_irq(otg_dev->irq, pcd);
++
++ /* start with the driver above us */
++ if (pcd->driver) {
++ /* should have been done already by driver model core */
++ DWC_WARN("driver '%s' is still registered\n",
++ pcd->driver->driver.name);
++ usb_gadget_unregister_driver(pcd->driver);
++ }
++ device_unregister(&pcd->gadget.dev);
++
++ if (GET_CORE_IF(pcd)->dma_enable) {
++ dma_free_coherent (NULL, sizeof (*pcd->setup_pkt) * 5, pcd->setup_pkt, pcd->setup_pkt_dma_handle);
++ dma_free_coherent (NULL, sizeof (uint16_t), pcd->status_buf, pcd->status_buf_dma_handle);
++ if (GET_CORE_IF(pcd)->dma_desc_enable) {
++ dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[0], dev_if->dma_setup_desc_addr[0], 1);
++ dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[1], dev_if->dma_setup_desc_addr[1], 1);
++ dwc_otg_ep_free_desc_chain(dev_if->in_desc_addr, dev_if->dma_in_desc_addr, 1);
++ dwc_otg_ep_free_desc_chain(dev_if->out_desc_addr, dev_if->dma_out_desc_addr, 1);
++ }
++ }
++ else {
++ kfree (pcd->setup_pkt);
++ kfree (pcd->status_buf);
++ }
++
++ kfree(pcd);
++ otg_dev->pcd = 0;
++}
++
++/**
++ * This function registers a gadget driver with the PCD.
++ *
++ * When a driver is successfully registered, it will receive control
++ * requests including set_configuration(), which enables non-control
++ * requests. then usb traffic follows until a disconnect is reported.
++ * then a host may connect again, or the driver might get unbound.
++ *
++ * @param driver The driver being registered
++ */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)
++int usb_gadget_probe_driver(struct usb_gadget_driver *driver, int (*bind)(struct usb_gadget *))
++#else
++int usb_gadget_register_driver(struct usb_gadget_driver *driver)
++#endif
++{
++ int retval;
++ int (*d_bind)(struct usb_gadget *);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)
++ d_bind = bind;
++#else
++ d_bind = driver->bind;
++#endif
++
++ DWC_DEBUGPL(DBG_PCD, "registering gadget driver '%s'\n", driver->driver.name);
++
++ if (!driver || driver->speed == USB_SPEED_UNKNOWN ||
++ !d_bind ||
++ !driver->unbind ||
++ !driver->disconnect ||
++ !driver->setup) {
++ DWC_DEBUGPL(DBG_PCDV,"EINVAL\n");
++ return -EINVAL;
++ }
++ if (s_pcd == 0) {
++ DWC_DEBUGPL(DBG_PCDV,"ENODEV\n");
++ return -ENODEV;
++ }
++ if (s_pcd->driver != 0) {
++ DWC_DEBUGPL(DBG_PCDV,"EBUSY (%p)\n", s_pcd->driver);
++ return -EBUSY;
++ }
++
++ /* hook up the driver */
++ s_pcd->driver = driver;
++ s_pcd->gadget.dev.driver = &driver->driver;
++
++ DWC_DEBUGPL(DBG_PCD, "bind to driver %s\n", driver->driver.name);
++ retval = d_bind(&s_pcd->gadget);
++ if (retval) {
++ DWC_ERROR("bind to driver %s --> error %d\n",
++ driver->driver.name, retval);
++ s_pcd->driver = 0;
++ s_pcd->gadget.dev.driver = 0;
++ return retval;
++ }
++ DWC_DEBUGPL(DBG_ANY, "registered gadget driver '%s'\n",
++ driver->driver.name);
++ return 0;
++}
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)
++EXPORT_SYMBOL(usb_gadget_probe_driver);
++#else
++EXPORT_SYMBOL(usb_gadget_register_driver);
++#endif
++
++/**
++ * This function unregisters a gadget driver
++ *
++ * @param driver The driver being unregistered
++ */
++int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
++{
++ //DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, _driver);
++
++ if (s_pcd == 0) {
++ DWC_DEBUGPL(DBG_ANY, "%s Return(%d): s_pcd==0\n", __func__,
++ -ENODEV);
++ return -ENODEV;
++ }
++ if (driver == 0 || driver != s_pcd->driver) {
++ DWC_DEBUGPL(DBG_ANY, "%s Return(%d): driver?\n", __func__,
++ -EINVAL);
++ return -EINVAL;
++ }
++
++ driver->unbind(&s_pcd->gadget);
++ s_pcd->driver = 0;
++
++ DWC_DEBUGPL(DBG_ANY, "unregistered driver '%s'\n",
++ driver->driver.name);
++ return 0;
++}
++EXPORT_SYMBOL(usb_gadget_unregister_driver);
++
++#endif /* DWC_HOST_ONLY */
+diff --git a/drivers/usb/dwc_otg/dwc_otg_pcd.h b/drivers/usb/dwc_otg/dwc_otg_pcd.h
+new file mode 100644
+index 0000000..48de957
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_pcd.h
+@@ -0,0 +1,248 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd.h $
++ * $Revision: 1.2 $
++ * $Date: 2008-11-21 05:39:15 $
++ * $Change: 1103515 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_HOST_ONLY
++#if !defined(__DWC_PCD_H__)
++#define __DWC_PCD_H__
++
++#include <linux/types.h>
++#include <linux/list.h>
++#include <linux/errno.h>
++#include <linux/device.h>
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21)
++# include <linux/usb/ch9.h>
++#else
++# include <linux/usb_ch9.h>
++#endif
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)
++#include <linux/usb/gadget.h>
++#else
++#include <linux/usb_gadget.h>
++#endif
++#include <linux/interrupt.h>
++#include <linux/dma-mapping.h>
++
++struct dwc_otg_device;
++
++#include "dwc_otg_cil.h"
++
++/**
++ * @file
++ *
++ * This file contains the structures, constants, and interfaces for
++ * the Perpherial Contoller Driver (PCD).
++ *
++ * The Peripheral Controller Driver (PCD) for Linux will implement the
++ * Gadget API, so that the existing Gadget drivers can be used. For
++ * the Mass Storage Function driver the File-backed USB Storage Gadget
++ * (FBS) driver will be used. The FBS driver supports the
++ * Control-Bulk (CB), Control-Bulk-Interrupt (CBI), and Bulk-Only
++ * transports.
++ *
++ */
++
++/** Invalid DMA Address */
++#define DMA_ADDR_INVALID (~(dma_addr_t)0)
++/** Maxpacket size for EP0 */
++#define MAX_EP0_SIZE 64
++/** Maxpacket size for any EP */
++#define MAX_PACKET_SIZE 1024
++
++/** Max Transfer size for any EP */
++#define MAX_TRANSFER_SIZE 65535
++
++/** Max DMA Descriptor count for any EP */
++#define MAX_DMA_DESC_CNT 64
++
++/**
++ * Get the pointer to the core_if from the pcd pointer.
++ */
++#define GET_CORE_IF( _pcd ) (_pcd->otg_dev->core_if)
++
++/**
++ * States of EP0.
++ */
++typedef enum ep0_state
++{
++ EP0_DISCONNECT, /* no host */
++ EP0_IDLE,
++ EP0_IN_DATA_PHASE,
++ EP0_OUT_DATA_PHASE,
++ EP0_IN_STATUS_PHASE,
++ EP0_OUT_STATUS_PHASE,
++ EP0_STALL,
++} ep0state_e;
++
++/** Fordward declaration.*/
++struct dwc_otg_pcd;
++
++/** DWC_otg iso request structure.
++ *
++ */
++typedef struct usb_iso_request dwc_otg_pcd_iso_request_t;
++
++/** PCD EP structure.
++ * This structure describes an EP, there is an array of EPs in the PCD
++ * structure.
++ */
++typedef struct dwc_otg_pcd_ep
++{
++ /** USB EP data */
++ struct usb_ep ep;
++ /** USB EP Descriptor */
++ const struct usb_endpoint_descriptor *desc;
++
++ /** queue of dwc_otg_pcd_requests. */
++ struct list_head queue;
++ unsigned stopped : 1;
++ unsigned disabling : 1;
++ unsigned dma : 1;
++ unsigned queue_sof : 1;
++
++#ifdef DWC_EN_ISOC
++ /** DWC_otg Isochronous Transfer */
++ struct usb_iso_request* iso_req;
++#endif //DWC_EN_ISOC
++
++ /** DWC_otg ep data. */
++ dwc_ep_t dwc_ep;
++
++ /** Pointer to PCD */
++ struct dwc_otg_pcd *pcd;
++}dwc_otg_pcd_ep_t;
++
++
++
++/** DWC_otg PCD Structure.
++ * This structure encapsulates the data for the dwc_otg PCD.
++ */
++typedef struct dwc_otg_pcd
++{
++ /** USB gadget */
++ struct usb_gadget gadget;
++ /** USB gadget driver pointer*/
++ struct usb_gadget_driver *driver;
++ /** The DWC otg device pointer. */
++ struct dwc_otg_device *otg_dev;
++
++ /** State of EP0 */
++ ep0state_e ep0state;
++ /** EP0 Request is pending */
++ unsigned ep0_pending : 1;
++ /** Indicates when SET CONFIGURATION Request is in process */
++ unsigned request_config : 1;
++ /** The state of the Remote Wakeup Enable. */
++ unsigned remote_wakeup_enable : 1;
++ /** The state of the B-Device HNP Enable. */
++ unsigned b_hnp_enable : 1;
++ /** The state of A-Device HNP Support. */
++ unsigned a_hnp_support : 1;
++ /** The state of the A-Device Alt HNP support. */
++ unsigned a_alt_hnp_support : 1;
++ /** Count of pending Requests */
++ unsigned request_pending;
++
++ /** SETUP packet for EP0
++ * This structure is allocated as a DMA buffer on PCD initialization
++ * with enough space for up to 3 setup packets.
++ */
++ union
++ {
++ struct usb_ctrlrequest req;
++ uint32_t d32[2];
++ } *setup_pkt;
++
++ dma_addr_t setup_pkt_dma_handle;
++
++ /** 2-byte dma buffer used to return status from GET_STATUS */
++ uint16_t *status_buf;
++ dma_addr_t status_buf_dma_handle;
++
++ /** EP0 */
++ dwc_otg_pcd_ep_t ep0;
++
++ /** Array of IN EPs. */
++ dwc_otg_pcd_ep_t in_ep[ MAX_EPS_CHANNELS - 1];
++ /** Array of OUT EPs. */
++ dwc_otg_pcd_ep_t out_ep[ MAX_EPS_CHANNELS - 1];
++ /** number of valid EPs in the above array. */
++// unsigned num_eps : 4;
++ spinlock_t lock;
++ /** Timer for SRP. If it expires before SRP is successful
++ * clear the SRP. */
++ struct timer_list srp_timer;
++
++ /** Tasklet to defer starting of TEST mode transmissions until
++ * Status Phase has been completed.
++ */
++ struct tasklet_struct test_mode_tasklet;
++
++ /** Tasklet to delay starting of xfer in DMA mode */
++ struct tasklet_struct *start_xfer_tasklet;
++
++ /** The test mode to enter when the tasklet is executed. */
++ unsigned test_mode;
++
++} dwc_otg_pcd_t;
++
++
++/** DWC_otg request structure.
++ * This structure is a list of requests.
++ */
++typedef struct
++{
++ struct usb_request req; /**< USB Request. */
++ struct list_head queue; /**< queue of these requests. */
++} dwc_otg_pcd_request_t;
++
++
++extern int dwc_otg_pcd_init(struct device *dev);
++
++//extern void dwc_otg_pcd_remove( struct dwc_otg_device *_otg_dev );
++extern void dwc_otg_pcd_remove( struct device *dev);
++extern int32_t dwc_otg_pcd_handle_intr( dwc_otg_pcd_t *pcd );
++extern void dwc_otg_pcd_start_srp_timer(dwc_otg_pcd_t *pcd );
++
++extern void dwc_otg_pcd_initiate_srp(dwc_otg_pcd_t *pcd);
++extern void dwc_otg_pcd_remote_wakeup(dwc_otg_pcd_t *pcd, int set);
++
++extern void dwc_otg_iso_buffer_done(dwc_otg_pcd_ep_t *ep, dwc_otg_pcd_iso_request_t *req);
++extern void dwc_otg_request_done(dwc_otg_pcd_ep_t *_ep, dwc_otg_pcd_request_t *req,
++ int status);
++extern void dwc_otg_request_nuke(dwc_otg_pcd_ep_t *_ep);
++extern void dwc_otg_pcd_update_otg(dwc_otg_pcd_t *_pcd,
++ const unsigned reset);
++
++#endif
++#endif /* DWC_HOST_ONLY */
+diff --git a/drivers/usb/dwc_otg/dwc_otg_pcd_intr.c b/drivers/usb/dwc_otg/dwc_otg_pcd_intr.c
+new file mode 100644
+index 0000000..fd44fd8
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_pcd_intr.c
+@@ -0,0 +1,3654 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd_intr.c $
++ * $Revision: 1.2 $
++ * $Date: 2008-11-21 05:39:15 $
++ * $Change: 1115682 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_HOST_ONLY
++#include <linux/interrupt.h>
++#include <linux/dma-mapping.h>
++#include <linux/version.h>
++
++#include "dwc_otg_driver.h"
++#include "dwc_otg_pcd.h"
++
++
++#define DEBUG_EP0
++
++/* request functions defined in "dwc_otg_pcd.c" */
++
++/** @file
++ * This file contains the implementation of the PCD Interrupt handlers.
++ *
++ * The PCD handles the device interrupts. Many conditions can cause a
++ * device interrupt. When an interrupt occurs, the device interrupt
++ * service routine determines the cause of the interrupt and
++ * dispatches handling to the appropriate function. These interrupt
++ * handling functions are described below.
++ * All interrupt registers are processed from LSB to MSB.
++ */
++
++
++/**
++ * This function prints the ep0 state for debug purposes.
++ */
++static inline void print_ep0_state(dwc_otg_pcd_t *pcd)
++{
++#ifdef DEBUG
++ char str[40];
++
++ switch (pcd->ep0state) {
++ case EP0_DISCONNECT:
++ strcpy(str, "EP0_DISCONNECT");
++ break;
++ case EP0_IDLE:
++ strcpy(str, "EP0_IDLE");
++ break;
++ case EP0_IN_DATA_PHASE:
++ strcpy(str, "EP0_IN_DATA_PHASE");
++ break;
++ case EP0_OUT_DATA_PHASE:
++ strcpy(str, "EP0_OUT_DATA_PHASE");
++ break;
++ case EP0_IN_STATUS_PHASE:
++ strcpy(str,"EP0_IN_STATUS_PHASE");
++ break;
++ case EP0_OUT_STATUS_PHASE:
++ strcpy(str,"EP0_OUT_STATUS_PHASE");
++ break;
++ case EP0_STALL:
++ strcpy(str,"EP0_STALL");
++ break;
++ default:
++ strcpy(str,"EP0_INVALID");
++ }
++
++ DWC_DEBUGPL(DBG_ANY, "%s(%d)\n", str, pcd->ep0state);
++#endif
++}
++
++/**
++ * This function returns pointer to in ep struct with number ep_num
++ */
++static inline dwc_otg_pcd_ep_t* get_in_ep(dwc_otg_pcd_t *pcd, uint32_t ep_num)
++{
++ int i;
++ int num_in_eps = GET_CORE_IF(pcd)->dev_if->num_in_eps;
++ if(ep_num == 0) {
++ return &pcd->ep0;
++ }
++ else {
++ for(i = 0; i < num_in_eps; ++i)
++ {
++ if(pcd->in_ep[i].dwc_ep.num == ep_num)
++ return &pcd->in_ep[i];
++ }
++ return 0;
++ }
++}
++/**
++ * This function returns pointer to out ep struct with number ep_num
++ */
++static inline dwc_otg_pcd_ep_t* get_out_ep(dwc_otg_pcd_t *pcd, uint32_t ep_num)
++{
++ int i;
++ int num_out_eps = GET_CORE_IF(pcd)->dev_if->num_out_eps;
++ if(ep_num == 0) {
++ return &pcd->ep0;
++ }
++ else {
++ for(i = 0; i < num_out_eps; ++i)
++ {
++ if(pcd->out_ep[i].dwc_ep.num == ep_num)
++ return &pcd->out_ep[i];
++ }
++ return 0;
++ }
++}
++/**
++ * This functions gets a pointer to an EP from the wIndex address
++ * value of the control request.
++ */
++static dwc_otg_pcd_ep_t *get_ep_by_addr (dwc_otg_pcd_t *pcd, u16 wIndex)
++{
++ dwc_otg_pcd_ep_t *ep;
++
++ if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0)
++ return &pcd->ep0;
++ list_for_each_entry(ep, &pcd->gadget.ep_list, ep.ep_list)
++ {
++ u8 bEndpointAddress;
++
++ if (!ep->desc)
++ continue;
++
++ bEndpointAddress = ep->desc->bEndpointAddress;
++ if((wIndex & (USB_DIR_IN | USB_ENDPOINT_NUMBER_MASK))
++ == (bEndpointAddress & (USB_DIR_IN | USB_ENDPOINT_NUMBER_MASK)))
++ return ep;
++ }
++ return NULL;
++}
++
++/**
++ * This function checks the EP request queue, if the queue is not
++ * empty the next request is started.
++ */
++void start_next_request(dwc_otg_pcd_ep_t *ep)
++{
++ dwc_otg_pcd_request_t *req = 0;
++ uint32_t max_transfer = GET_CORE_IF(ep->pcd)->core_params->max_transfer_size;
++
++ if (!list_empty(&ep->queue)) {
++ req = list_entry(ep->queue.next,
++ dwc_otg_pcd_request_t, queue);
++
++ /* Setup and start the Transfer */
++ ep->dwc_ep.dma_addr = req->req.dma;
++ ep->dwc_ep.start_xfer_buff = req->req.buf;
++ ep->dwc_ep.xfer_buff = req->req.buf;
++ ep->dwc_ep.sent_zlp = 0;
++ ep->dwc_ep.total_len = req->req.length;
++ ep->dwc_ep.xfer_len = 0;
++ ep->dwc_ep.xfer_count = 0;
++
++ if(max_transfer > MAX_TRANSFER_SIZE) {
++ ep->dwc_ep.maxxfer = max_transfer - (max_transfer % ep->dwc_ep.maxpacket);
++ } else {
++ ep->dwc_ep.maxxfer = max_transfer;
++ }
++
++ if(req->req.zero) {
++ if((ep->dwc_ep.total_len % ep->dwc_ep.maxpacket == 0)
++ && (ep->dwc_ep.total_len != 0)) {
++ ep->dwc_ep.sent_zlp = 1;
++ }
++
++ }
++
++ dwc_otg_ep_start_transfer(GET_CORE_IF(ep->pcd), &ep->dwc_ep);
++ }
++}
++
++/**
++ * This function handles the SOF Interrupts. At this time the SOF
++ * Interrupt is disabled.
++ */
++int32_t dwc_otg_pcd_handle_sof_intr(dwc_otg_pcd_t *pcd)
++{
++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++
++ gintsts_data_t gintsts;
++
++ DWC_DEBUGPL(DBG_PCD, "SOF\n");
++
++ /* Clear interrupt */
++ gintsts.d32 = 0;
++ gintsts.b.sofintr = 1;
++ dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
++
++ return 1;
++}
++
++
++/**
++ * This function handles the Rx Status Queue Level Interrupt, which
++ * indicates that there is a least one packet in the Rx FIFO. The
++ * packets are moved from the FIFO to memory, where they will be
++ * processed when the Endpoint Interrupt Register indicates Transfer
++ * Complete or SETUP Phase Done.
++ *
++ * Repeat the following until the Rx Status Queue is empty:
++ * -# Read the Receive Status Pop Register (GRXSTSP) to get Packet
++ * info
++ * -# If Receive FIFO is empty then skip to step Clear the interrupt
++ * and exit
++ * -# If SETUP Packet call dwc_otg_read_setup_packet to copy the
++ * SETUP data to the buffer
++ * -# If OUT Data Packet call dwc_otg_read_packet to copy the data
++ * to the destination buffer
++ */
++int32_t dwc_otg_pcd_handle_rx_status_q_level_intr(dwc_otg_pcd_t *pcd)
++{
++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++ gintmsk_data_t gintmask = {.d32=0};
++ device_grxsts_data_t status;
++ dwc_otg_pcd_ep_t *ep;
++ gintsts_data_t gintsts;
++#ifdef DEBUG
++ static char *dpid_str[] ={ "D0", "D2", "D1", "MDATA" };
++#endif
++
++ //DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, _pcd);
++ /* Disable the Rx Status Queue Level interrupt */
++ gintmask.b.rxstsqlvl= 1;
++ dwc_modify_reg32(&global_regs->gintmsk, gintmask.d32, 0);
++
++ /* Get the Status from the top of the FIFO */
++ status.d32 = dwc_read_reg32(&global_regs->grxstsp);
++
++ DWC_DEBUGPL(DBG_PCD, "EP:%d BCnt:%d DPID:%s "
++ "pktsts:%x Frame:%d(0x%0x)\n",
++ status.b.epnum, status.b.bcnt,
++ dpid_str[status.b.dpid],
++ status.b.pktsts, status.b.fn, status.b.fn);
++ /* Get pointer to EP structure */
++ ep = get_out_ep(pcd, status.b.epnum);
++
++ switch (status.b.pktsts) {
++ case DWC_DSTS_GOUT_NAK:
++ DWC_DEBUGPL(DBG_PCDV, "Global OUT NAK\n");
++ break;
++ case DWC_STS_DATA_UPDT:
++ DWC_DEBUGPL(DBG_PCDV, "OUT Data Packet\n");
++ if (status.b.bcnt && ep->dwc_ep.xfer_buff) {
++ /** @todo NGS Check for buffer overflow? */
++ dwc_otg_read_packet(core_if,
++ ep->dwc_ep.xfer_buff,
++ status.b.bcnt);
++ ep->dwc_ep.xfer_count += status.b.bcnt;
++ ep->dwc_ep.xfer_buff += status.b.bcnt;
++ }
++ break;
++ case DWC_STS_XFER_COMP:
++ DWC_DEBUGPL(DBG_PCDV, "OUT Complete\n");
++ break;
++ case DWC_DSTS_SETUP_COMP:
++#ifdef DEBUG_EP0
++ DWC_DEBUGPL(DBG_PCDV, "Setup Complete\n");
++#endif
++ break;
++case DWC_DSTS_SETUP_UPDT:
++ dwc_otg_read_setup_packet(core_if, pcd->setup_pkt->d32);
++#ifdef DEBUG_EP0
++ DWC_DEBUGPL(DBG_PCD,
++ "SETUP PKT: %02x.%02x v%04x i%04x l%04x\n",
++ pcd->setup_pkt->req.bRequestType,
++ pcd->setup_pkt->req.bRequest,
++ pcd->setup_pkt->req.wValue,
++ pcd->setup_pkt->req.wIndex,
++ pcd->setup_pkt->req.wLength);
++#endif
++ ep->dwc_ep.xfer_count += status.b.bcnt;
++ break;
++ default:
++ DWC_DEBUGPL(DBG_PCDV, "Invalid Packet Status (0x%0x)\n",
++ status.b.pktsts);
++ break;
++ }
++
++ /* Enable the Rx Status Queue Level interrupt */
++ dwc_modify_reg32(&global_regs->gintmsk, 0, gintmask.d32);
++ /* Clear interrupt */
++ gintsts.d32 = 0;
++ gintsts.b.rxstsqlvl = 1;
++ dwc_write_reg32 (&global_regs->gintsts, gintsts.d32);
++
++ //DWC_DEBUGPL(DBG_PCDV, "EXIT: %s\n", __func__);
++ return 1;
++}
++/**
++ * This function examines the Device IN Token Learning Queue to
++ * determine the EP number of the last IN token received. This
++ * implementation is for the Mass Storage device where there are only
++ * 2 IN EPs (Control-IN and BULK-IN).
++ *
++ * The EP numbers for the first six IN Tokens are in DTKNQR1 and there
++ * are 8 EP Numbers in each of the other possible DTKNQ Registers.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ *
++ */
++static inline int get_ep_of_last_in_token(dwc_otg_core_if_t *core_if)
++{
++ dwc_otg_device_global_regs_t *dev_global_regs =
++ core_if->dev_if->dev_global_regs;
++ const uint32_t TOKEN_Q_DEPTH = core_if->hwcfg2.b.dev_token_q_depth;
++ /* Number of Token Queue Registers */
++ const int DTKNQ_REG_CNT = (TOKEN_Q_DEPTH + 7) / 8;
++ dtknq1_data_t dtknqr1;
++ uint32_t in_tkn_epnums[4];
++ int ndx = 0;
++ int i = 0;
++ volatile uint32_t *addr = &dev_global_regs->dtknqr1;
++ int epnum = 0;
++
++ //DWC_DEBUGPL(DBG_PCD,"dev_token_q_depth=%d\n",TOKEN_Q_DEPTH);
++
++
++ /* Read the DTKNQ Registers */
++ for (i = 0; i < DTKNQ_REG_CNT; i++)
++ {
++ in_tkn_epnums[ i ] = dwc_read_reg32(addr);
++ DWC_DEBUGPL(DBG_PCDV, "DTKNQR%d=0x%08x\n", i+1,
++ in_tkn_epnums[i]);
++ if (addr == &dev_global_regs->dvbusdis) {
++ addr = &dev_global_regs->dtknqr3_dthrctl;
++ }
++ else {
++ ++addr;
++ }
++
++ }
++
++ /* Copy the DTKNQR1 data to the bit field. */
++ dtknqr1.d32 = in_tkn_epnums[0];
++ /* Get the EP numbers */
++ in_tkn_epnums[0] = dtknqr1.b.epnums0_5;
++ ndx = dtknqr1.b.intknwptr - 1;
++
++ //DWC_DEBUGPL(DBG_PCDV,"ndx=%d\n",ndx);
++ if (ndx == -1) {
++ /** @todo Find a simpler way to calculate the max
++ * queue position.*/
++ int cnt = TOKEN_Q_DEPTH;
++ if (TOKEN_Q_DEPTH <= 6) {
++ cnt = TOKEN_Q_DEPTH - 1;
++ }
++ else if (TOKEN_Q_DEPTH <= 14) {
++ cnt = TOKEN_Q_DEPTH - 7;
++ }
++ else if (TOKEN_Q_DEPTH <= 22) {
++ cnt = TOKEN_Q_DEPTH - 15;
++ }
++ else {
++ cnt = TOKEN_Q_DEPTH - 23;
++ }
++ epnum = (in_tkn_epnums[ DTKNQ_REG_CNT - 1 ] >> (cnt * 4)) & 0xF;
++ }
++ else {
++ if (ndx <= 5) {
++ epnum = (in_tkn_epnums[0] >> (ndx * 4)) & 0xF;
++ }
++ else if (ndx <= 13) {
++ ndx -= 6;
++ epnum = (in_tkn_epnums[1] >> (ndx * 4)) & 0xF;
++ }
++ else if (ndx <= 21) {
++ ndx -= 14;
++ epnum = (in_tkn_epnums[2] >> (ndx * 4)) & 0xF;
++ }
++ else if (ndx <= 29) {
++ ndx -= 22;
++ epnum = (in_tkn_epnums[3] >> (ndx * 4)) & 0xF;
++ }
++ }
++ //DWC_DEBUGPL(DBG_PCD,"epnum=%d\n",epnum);
++ return epnum;
++}
++
++/**
++ * This interrupt occurs when the non-periodic Tx FIFO is half-empty.
++ * The active request is checked for the next packet to be loaded into
++ * the non-periodic Tx FIFO.
++ */
++int32_t dwc_otg_pcd_handle_np_tx_fifo_empty_intr(dwc_otg_pcd_t *pcd)
++{
++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++ dwc_otg_core_global_regs_t *global_regs =
++ core_if->core_global_regs;
++ dwc_otg_dev_in_ep_regs_t *ep_regs;
++ gnptxsts_data_t txstatus = {.d32 = 0};
++ gintsts_data_t gintsts;
++
++ int epnum = 0;
++ dwc_otg_pcd_ep_t *ep = 0;
++ uint32_t len = 0;
++ int dwords;
++
++ /* Get the epnum from the IN Token Learning Queue. */
++ epnum = get_ep_of_last_in_token(core_if);
++ ep = get_in_ep(pcd, epnum);
++
++ DWC_DEBUGPL(DBG_PCD, "NP TxFifo Empty: %s(%d) \n", ep->ep.name, epnum);
++ ep_regs = core_if->dev_if->in_ep_regs[epnum];
++
++ len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
++ if (len > ep->dwc_ep.maxpacket) {
++ len = ep->dwc_ep.maxpacket;
++ }
++ dwords = (len + 3)/4;
++
++
++ /* While there is space in the queue and space in the FIFO and
++ * More data to tranfer, Write packets to the Tx FIFO */
++ txstatus.d32 = dwc_read_reg32(&global_regs->gnptxsts);
++ DWC_DEBUGPL(DBG_PCDV, "b4 GNPTXSTS=0x%08x\n",txstatus.d32);
++
++ while (txstatus.b.nptxqspcavail > 0 &&
++ txstatus.b.nptxfspcavail > dwords &&
++ ep->dwc_ep.xfer_count < ep->dwc_ep.xfer_len) {
++ /* Write the FIFO */
++ dwc_otg_ep_write_packet(core_if, &ep->dwc_ep, 0);
++ len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
++
++ if (len > ep->dwc_ep.maxpacket) {
++ len = ep->dwc_ep.maxpacket;
++ }
++
++ dwords = (len + 3)/4;
++ txstatus.d32 = dwc_read_reg32(&global_regs->gnptxsts);
++ DWC_DEBUGPL(DBG_PCDV,"GNPTXSTS=0x%08x\n",txstatus.d32);
++ }
++
++ DWC_DEBUGPL(DBG_PCDV, "GNPTXSTS=0x%08x\n",
++ dwc_read_reg32(&global_regs->gnptxsts));
++
++ /* Clear interrupt */
++ gintsts.d32 = 0;
++ gintsts.b.nptxfempty = 1;
++ dwc_write_reg32 (&global_regs->gintsts, gintsts.d32);
++
++ return 1;
++}
++
++/**
++ * This function is called when dedicated Tx FIFO Empty interrupt occurs.
++ * The active request is checked for the next packet to be loaded into
++ * apropriate Tx FIFO.
++ */
++static int32_t write_empty_tx_fifo(dwc_otg_pcd_t *pcd, uint32_t epnum)
++{
++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++ dwc_otg_dev_if_t* dev_if = core_if->dev_if;
++ dwc_otg_dev_in_ep_regs_t *ep_regs;
++ dtxfsts_data_t txstatus = {.d32 = 0};
++ dwc_otg_pcd_ep_t *ep = 0;
++ uint32_t len = 0;
++ int dwords;
++
++ ep = get_in_ep(pcd, epnum);
++
++ DWC_DEBUGPL(DBG_PCD, "Dedicated TxFifo Empty: %s(%d) \n", ep->ep.name, epnum);
++
++ ep_regs = core_if->dev_if->in_ep_regs[epnum];
++
++ len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
++
++ if (len > ep->dwc_ep.maxpacket) {
++ len = ep->dwc_ep.maxpacket;
++ }
++
++ dwords = (len + 3)/4;
++
++ /* While there is space in the queue and space in the FIFO and
++ * More data to tranfer, Write packets to the Tx FIFO */
++ txstatus.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dtxfsts);
++ DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n",epnum,txstatus.d32);
++
++ while (txstatus.b.txfspcavail > dwords &&
++ ep->dwc_ep.xfer_count < ep->dwc_ep.xfer_len &&
++ ep->dwc_ep.xfer_len != 0) {
++ /* Write the FIFO */
++ dwc_otg_ep_write_packet(core_if, &ep->dwc_ep, 0);
++
++ len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
++ if (len > ep->dwc_ep.maxpacket) {
++ len = ep->dwc_ep.maxpacket;
++ }
++
++ dwords = (len + 3)/4;
++ txstatus.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dtxfsts);
++ DWC_DEBUGPL(DBG_PCDV,"dtxfsts[%d]=0x%08x\n", epnum, txstatus.d32);
++ }
++
++ DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n",epnum,dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dtxfsts));
++
++ return 1;
++}
++
++
++/**
++ * This function is called when the Device is disconnected. It stops
++ * any active requests and informs the Gadget driver of the
++ * disconnect.
++ */
++void dwc_otg_pcd_stop(dwc_otg_pcd_t *pcd)
++{
++ int i, num_in_eps, num_out_eps;
++ dwc_otg_pcd_ep_t *ep;
++
++ gintmsk_data_t intr_mask = {.d32 = 0};
++
++ num_in_eps = GET_CORE_IF(pcd)->dev_if->num_in_eps;
++ num_out_eps = GET_CORE_IF(pcd)->dev_if->num_out_eps;
++
++ DWC_DEBUGPL(DBG_PCDV, "%s() \n", __func__);
++ /* don't disconnect drivers more than once */
++ if (pcd->ep0state == EP0_DISCONNECT) {
++ DWC_DEBUGPL(DBG_ANY, "%s() Already Disconnected\n", __func__);
++ return;
++ }
++ pcd->ep0state = EP0_DISCONNECT;
++
++ /* Reset the OTG state. */
++ dwc_otg_pcd_update_otg(pcd, 1);
++
++ /* Disable the NP Tx Fifo Empty Interrupt. */
++ intr_mask.b.nptxfempty = 1;
++ dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
++ intr_mask.d32, 0);
++
++ /* Flush the FIFOs */
++ /**@todo NGS Flush Periodic FIFOs */
++ dwc_otg_flush_tx_fifo(GET_CORE_IF(pcd), 0x10);
++ dwc_otg_flush_rx_fifo(GET_CORE_IF(pcd));
++
++ /* prevent new request submissions, kill any outstanding requests */
++ ep = &pcd->ep0;
++ dwc_otg_request_nuke(ep);
++ /* prevent new request submissions, kill any outstanding requests */
++ for (i = 0; i < num_in_eps; i++)
++ {
++ dwc_otg_pcd_ep_t *ep = &pcd->in_ep[i];
++ dwc_otg_request_nuke(ep);
++ }
++ /* prevent new request submissions, kill any outstanding requests */
++ for (i = 0; i < num_out_eps; i++)
++ {
++ dwc_otg_pcd_ep_t *ep = &pcd->out_ep[i];
++ dwc_otg_request_nuke(ep);
++ }
++
++ /* report disconnect; the driver is already quiesced */
++ if (pcd->driver && pcd->driver->disconnect) {
++ SPIN_UNLOCK(&pcd->lock);
++ pcd->driver->disconnect(&pcd->gadget);
++ SPIN_LOCK(&pcd->lock);
++ }
++}
++
++/**
++ * This interrupt indicates that ...
++ */
++int32_t dwc_otg_pcd_handle_i2c_intr(dwc_otg_pcd_t *pcd)
++{
++ gintmsk_data_t intr_mask = { .d32 = 0};
++ gintsts_data_t gintsts;
++
++ DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "i2cintr");
++ intr_mask.b.i2cintr = 1;
++ dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
++ intr_mask.d32, 0);
++
++ /* Clear interrupt */
++ gintsts.d32 = 0;
++ gintsts.b.i2cintr = 1;
++ dwc_write_reg32 (&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++ gintsts.d32);
++ return 1;
++}
++
++
++/**
++ * This interrupt indicates that ...
++ */
++int32_t dwc_otg_pcd_handle_early_suspend_intr(dwc_otg_pcd_t *pcd)
++{
++ gintsts_data_t gintsts;
++#if defined(VERBOSE)
++ DWC_PRINT("Early Suspend Detected\n");
++#endif
++ /* Clear interrupt */
++ gintsts.d32 = 0;
++ gintsts.b.erlysuspend = 1;
++ dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++ gintsts.d32);
++ return 1;
++}
++
++/**
++ * This function configures EPO to receive SETUP packets.
++ *
++ * @todo NGS: Update the comments from the HW FS.
++ *
++ * -# Program the following fields in the endpoint specific registers
++ * for Control OUT EP 0, in order to receive a setup packet
++ * - DOEPTSIZ0.Packet Count = 3 (To receive up to 3 back to back
++ * setup packets)
++ * - DOEPTSIZE0.Transfer Size = 24 Bytes (To receive up to 3 back
++ * to back setup packets)
++ * - In DMA mode, DOEPDMA0 Register with a memory address to
++ * store any setup packets received
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param pcd Programming view of the PCD.
++ */
++static inline void ep0_out_start(dwc_otg_core_if_t *core_if, dwc_otg_pcd_t *pcd)
++{
++ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++ deptsiz0_data_t doeptsize0 = { .d32 = 0};
++ dwc_otg_dma_desc_t* dma_desc;
++ depctl_data_t doepctl = { .d32 = 0 };
++
++#ifdef VERBOSE
++ DWC_DEBUGPL(DBG_PCDV,"%s() doepctl0=%0x\n", __func__,
++ dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl));
++#endif
++
++ doeptsize0.b.supcnt = 3;
++ doeptsize0.b.pktcnt = 1;
++ doeptsize0.b.xfersize = 8*3;
++
++
++ if (core_if->dma_enable) {
++ if (!core_if->dma_desc_enable) {
++ /** put here as for Hermes mode deptisz register should not be written */
++ dwc_write_reg32(&dev_if->out_ep_regs[0]->doeptsiz,
++ doeptsize0.d32);
++
++ /** @todo dma needs to handle multiple setup packets (up to 3) */
++ dwc_write_reg32(&dev_if->out_ep_regs[0]->doepdma,
++ pcd->setup_pkt_dma_handle);
++ } else {
++ dev_if->setup_desc_index = (dev_if->setup_desc_index + 1) & 1;
++ dma_desc = dev_if->setup_desc_addr[dev_if->setup_desc_index];
++
++ /** DMA Descriptor Setup */
++ dma_desc->status.b.bs = BS_HOST_BUSY;
++ dma_desc->status.b.l = 1;
++ dma_desc->status.b.ioc = 1;
++ dma_desc->status.b.bytes = pcd->ep0.dwc_ep.maxpacket;
++ dma_desc->buf = pcd->setup_pkt_dma_handle;
++ dma_desc->status.b.bs = BS_HOST_READY;
++
++ /** DOEPDMA0 Register write */
++ dwc_write_reg32(&dev_if->out_ep_regs[0]->doepdma, dev_if->dma_setup_desc_addr[dev_if->setup_desc_index]);
++ }
++
++ } else {
++ /** put here as for Hermes mode deptisz register should not be written */
++ dwc_write_reg32(&dev_if->out_ep_regs[0]->doeptsiz,
++ doeptsize0.d32);
++ }
++
++ /** DOEPCTL0 Register write */
++ doepctl.b.epena = 1;
++ doepctl.b.cnak = 1;
++ dwc_write_reg32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32);
++
++#ifdef VERBOSE
++ DWC_DEBUGPL(DBG_PCDV,"doepctl0=%0x\n",
++ dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl));
++ DWC_DEBUGPL(DBG_PCDV,"diepctl0=%0x\n",
++ dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl));
++#endif
++}
++
++
++/**
++ * This interrupt occurs when a USB Reset is detected. When the USB
++ * Reset Interrupt occurs the device state is set to DEFAULT and the
++ * EP0 state is set to IDLE.
++ * -# Set the NAK bit for all OUT endpoints (DOEPCTLn.SNAK = 1)
++ * -# Unmask the following interrupt bits
++ * - DAINTMSK.INEP0 = 1 (Control 0 IN endpoint)
++ * - DAINTMSK.OUTEP0 = 1 (Control 0 OUT endpoint)
++ * - DOEPMSK.SETUP = 1
++ * - DOEPMSK.XferCompl = 1
++ * - DIEPMSK.XferCompl = 1
++ * - DIEPMSK.TimeOut = 1
++ * -# Program the following fields in the endpoint specific registers
++ * for Control OUT EP 0, in order to receive a setup packet
++ * - DOEPTSIZ0.Packet Count = 3 (To receive up to 3 back to back
++ * setup packets)
++ * - DOEPTSIZE0.Transfer Size = 24 Bytes (To receive up to 3 back
++ * to back setup packets)
++ * - In DMA mode, DOEPDMA0 Register with a memory address to
++ * store any setup packets received
++ * At this point, all the required initialization, except for enabling
++ * the control 0 OUT endpoint is done, for receiving SETUP packets.
++ */
++int32_t dwc_otg_pcd_handle_usb_reset_intr(dwc_otg_pcd_t * pcd)
++{
++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++ depctl_data_t doepctl = { .d32 = 0};
++
++ daint_data_t daintmsk = { .d32 = 0};
++ doepmsk_data_t doepmsk = { .d32 = 0};
++ diepmsk_data_t diepmsk = { .d32 = 0};
++
++ dcfg_data_t dcfg = { .d32=0 };
++ grstctl_t resetctl = { .d32=0 };
++ dctl_data_t dctl = {.d32=0};
++ int i = 0;
++ gintsts_data_t gintsts;
++
++ DWC_PRINT("USB RESET\n");
++#ifdef DWC_EN_ISOC
++ for(i = 1;i < 16; ++i)
++ {
++ dwc_otg_pcd_ep_t *ep;
++ dwc_ep_t *dwc_ep;
++ ep = get_in_ep(pcd,i);
++ if(ep != 0){
++ dwc_ep = &ep->dwc_ep;
++ dwc_ep->next_frame = 0xffffffff;
++ }
++ }
++#endif /* DWC_EN_ISOC */
++
++ /* reset the HNP settings */
++ dwc_otg_pcd_update_otg(pcd, 1);
++
++ /* Clear the Remote Wakeup Signalling */
++ dctl.b.rmtwkupsig = 1;
++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dctl,
++ dctl.d32, 0);
++
++ /* Set NAK for all OUT EPs */
++ doepctl.b.snak = 1;
++ for (i=0; i <= dev_if->num_out_eps; i++)
++ {
++ dwc_write_reg32(&dev_if->out_ep_regs[i]->doepctl,
++ doepctl.d32);
++ }
++
++ /* Flush the NP Tx FIFO */
++ dwc_otg_flush_tx_fifo(core_if, 0x10);
++ /* Flush the Learning Queue */
++ resetctl.b.intknqflsh = 1;
++ dwc_write_reg32(&core_if->core_global_regs->grstctl, resetctl.d32);
++
++ if(core_if->multiproc_int_enable) {
++ daintmsk.b.inep0 = 1;
++ daintmsk.b.outep0 = 1;
++ dwc_write_reg32(&dev_if->dev_global_regs->deachintmsk, daintmsk.d32);
++
++ doepmsk.b.setup = 1;
++ doepmsk.b.xfercompl = 1;
++ doepmsk.b.ahberr = 1;
++ doepmsk.b.epdisabled = 1;
++
++ if(core_if->dma_desc_enable) {
++ doepmsk.b.stsphsercvd = 1;
++ doepmsk.b.bna = 1;
++ }
++/*
++ doepmsk.b.babble = 1;
++ doepmsk.b.nyet = 1;
++
++ if(core_if->dma_enable) {
++ doepmsk.b.nak = 1;
++ }
++*/
++ dwc_write_reg32(&dev_if->dev_global_regs->doepeachintmsk[0], doepmsk.d32);
++
++ diepmsk.b.xfercompl = 1;
++ diepmsk.b.timeout = 1;
++ diepmsk.b.epdisabled = 1;
++ diepmsk.b.ahberr = 1;
++ diepmsk.b.intknepmis = 1;
++
++ if(core_if->dma_desc_enable) {
++ diepmsk.b.bna = 1;
++ }
++/*
++ if(core_if->dma_enable) {
++ diepmsk.b.nak = 1;
++ }
++*/
++ dwc_write_reg32(&dev_if->dev_global_regs->diepeachintmsk[0], diepmsk.d32);
++ } else{
++ daintmsk.b.inep0 = 1;
++ daintmsk.b.outep0 = 1;
++ dwc_write_reg32(&dev_if->dev_global_regs->daintmsk, daintmsk.d32);
++
++ doepmsk.b.setup = 1;
++ doepmsk.b.xfercompl = 1;
++ doepmsk.b.ahberr = 1;
++ doepmsk.b.epdisabled = 1;
++
++ if(core_if->dma_desc_enable) {
++ doepmsk.b.stsphsercvd = 1;
++ doepmsk.b.bna = 1;
++ }
++/*
++ doepmsk.b.babble = 1;
++ doepmsk.b.nyet = 1;
++ doepmsk.b.nak = 1;
++*/
++ dwc_write_reg32(&dev_if->dev_global_regs->doepmsk, doepmsk.d32);
++
++ diepmsk.b.xfercompl = 1;
++ diepmsk.b.timeout = 1;
++ diepmsk.b.epdisabled = 1;
++ diepmsk.b.ahberr = 1;
++ diepmsk.b.intknepmis = 1;
++
++ if(core_if->dma_desc_enable) {
++ diepmsk.b.bna = 1;
++ }
++
++// diepmsk.b.nak = 1;
++
++ dwc_write_reg32(&dev_if->dev_global_regs->diepmsk, diepmsk.d32);
++ }
++
++ /* Reset Device Address */
++ dcfg.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dcfg);
++ dcfg.b.devaddr = 0;
++ dwc_write_reg32(&dev_if->dev_global_regs->dcfg, dcfg.d32);
++
++ /* setup EP0 to receive SETUP packets */
++ ep0_out_start(core_if, pcd);
++
++ /* Clear interrupt */
++ gintsts.d32 = 0;
++ gintsts.b.usbreset = 1;
++ dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
++
++ return 1;
++}
++
++/**
++ * Get the device speed from the device status register and convert it
++ * to USB speed constant.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static int get_device_speed(dwc_otg_core_if_t *core_if)
++{
++ dsts_data_t dsts;
++ enum usb_device_speed speed = USB_SPEED_UNKNOWN;
++ dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
++
++ switch (dsts.b.enumspd) {
++ case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ:
++ speed = USB_SPEED_HIGH;
++ break;
++ case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ:
++ case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ:
++ speed = USB_SPEED_FULL;
++ break;
++
++ case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ:
++ speed = USB_SPEED_LOW;
++ break;
++ }
++
++ return speed;
++}
++
++/**
++ * Read the device status register and set the device speed in the
++ * data structure.
++ * Set up EP0 to receive SETUP packets by calling dwc_ep0_activate.
++ */
++int32_t dwc_otg_pcd_handle_enum_done_intr(dwc_otg_pcd_t *pcd)
++{
++ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
++ gintsts_data_t gintsts;
++ gusbcfg_data_t gusbcfg;
++ dwc_otg_core_global_regs_t *global_regs =
++ GET_CORE_IF(pcd)->core_global_regs;
++ uint8_t utmi16b, utmi8b;
++ DWC_DEBUGPL(DBG_PCD, "SPEED ENUM\n");
++
++ if (GET_CORE_IF(pcd)->snpsid >= 0x4F54260A) {
++ utmi16b = 6;
++ utmi8b = 9;
++ } else {
++ utmi16b = 4;
++ utmi8b = 8;
++ }
++ dwc_otg_ep0_activate(GET_CORE_IF(pcd), &ep0->dwc_ep);
++
++#ifdef DEBUG_EP0
++ print_ep0_state(pcd);
++#endif
++
++ if (pcd->ep0state == EP0_DISCONNECT) {
++ pcd->ep0state = EP0_IDLE;
++ }
++ else if (pcd->ep0state == EP0_STALL) {
++ pcd->ep0state = EP0_IDLE;
++ }
++
++ pcd->ep0state = EP0_IDLE;
++
++ ep0->stopped = 0;
++
++ pcd->gadget.speed = get_device_speed(GET_CORE_IF(pcd));
++
++ /* Set USB turnaround time based on device speed and PHY interface. */
++ gusbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
++ if (pcd->gadget.speed == USB_SPEED_HIGH) {
++ if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == DWC_HWCFG2_HS_PHY_TYPE_ULPI) {
++ /* ULPI interface */
++ gusbcfg.b.usbtrdtim = 9;
++ }
++ if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == DWC_HWCFG2_HS_PHY_TYPE_UTMI) {
++ /* UTMI+ interface */
++ if (GET_CORE_IF(pcd)->hwcfg4.b.utmi_phy_data_width == 0) {
++ gusbcfg.b.usbtrdtim = utmi8b;
++ }
++ else if (GET_CORE_IF(pcd)->hwcfg4.b.utmi_phy_data_width == 1) {
++ gusbcfg.b.usbtrdtim = utmi16b;
++ }
++ else if (GET_CORE_IF(pcd)->core_params->phy_utmi_width == 8) {
++ gusbcfg.b.usbtrdtim = utmi8b;
++ }
++ else {
++ gusbcfg.b.usbtrdtim = utmi16b;
++ }
++ }
++ if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI) {
++ /* UTMI+ OR ULPI interface */
++ if (gusbcfg.b.ulpi_utmi_sel == 1) {
++ /* ULPI interface */
++ gusbcfg.b.usbtrdtim = 9;
++ }
++ else {
++ /* UTMI+ interface */
++ if (GET_CORE_IF(pcd)->core_params->phy_utmi_width == 16) {
++ gusbcfg.b.usbtrdtim = utmi16b;
++ }
++ else {
++ gusbcfg.b.usbtrdtim = utmi8b;
++ }
++ }
++ }
++ }
++ else {
++ /* Full or low speed */
++ gusbcfg.b.usbtrdtim = 9;
++ }
++ dwc_write_reg32(&global_regs->gusbcfg, gusbcfg.d32);
++
++ /* Clear interrupt */
++ gintsts.d32 = 0;
++ gintsts.b.enumdone = 1;
++ dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++ gintsts.d32);
++ return 1;
++}
++
++/**
++ * This interrupt indicates that the ISO OUT Packet was dropped due to
++ * Rx FIFO full or Rx Status Queue Full. If this interrupt occurs
++ * read all the data from the Rx FIFO.
++ */
++int32_t dwc_otg_pcd_handle_isoc_out_packet_dropped_intr(dwc_otg_pcd_t *pcd)
++{
++ gintmsk_data_t intr_mask = { .d32 = 0};
++ gintsts_data_t gintsts;
++
++ DWC_PRINT("INTERRUPT Handler not implemented for %s\n",
++ "ISOC Out Dropped");
++
++ intr_mask.b.isooutdrop = 1;
++ dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
++ intr_mask.d32, 0);
++
++ /* Clear interrupt */
++
++ gintsts.d32 = 0;
++ gintsts.b.isooutdrop = 1;
++ dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++ gintsts.d32);
++
++ return 1;
++}
++
++/**
++ * This interrupt indicates the end of the portion of the micro-frame
++ * for periodic transactions. If there is a periodic transaction for
++ * the next frame, load the packets into the EP periodic Tx FIFO.
++ */
++int32_t dwc_otg_pcd_handle_end_periodic_frame_intr(dwc_otg_pcd_t *pcd)
++{
++ gintmsk_data_t intr_mask = { .d32 = 0};
++ gintsts_data_t gintsts;
++ DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "EOP");
++
++ intr_mask.b.eopframe = 1;
++ dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
++ intr_mask.d32, 0);
++
++ /* Clear interrupt */
++ gintsts.d32 = 0;
++ gintsts.b.eopframe = 1;
++ dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, gintsts.d32);
++
++ return 1;
++}
++
++/**
++ * This interrupt indicates that EP of the packet on the top of the
++ * non-periodic Tx FIFO does not match EP of the IN Token received.
++ *
++ * The "Device IN Token Queue" Registers are read to determine the
++ * order the IN Tokens have been received. The non-periodic Tx FIFO
++ * is flushed, so it can be reloaded in the order seen in the IN Token
++ * Queue.
++ */
++int32_t dwc_otg_pcd_handle_ep_mismatch_intr(dwc_otg_core_if_t *core_if)
++{
++ gintsts_data_t gintsts;
++ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, core_if);
++
++ /* Clear interrupt */
++ gintsts.d32 = 0;
++ gintsts.b.epmismatch = 1;
++ dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
++
++ return 1;
++}
++
++/**
++ * This funcion stalls EP0.
++ */
++static inline void ep0_do_stall(dwc_otg_pcd_t *pcd, const int err_val)
++{
++ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
++ struct usb_ctrlrequest *ctrl = &pcd->setup_pkt->req;
++ DWC_WARN("req %02x.%02x protocol STALL; err %d\n",
++ ctrl->bRequestType, ctrl->bRequest, err_val);
++
++ ep0->dwc_ep.is_in = 1;
++ dwc_otg_ep_set_stall(pcd->otg_dev->core_if, &ep0->dwc_ep);
++ pcd->ep0.stopped = 1;
++ pcd->ep0state = EP0_IDLE;
++ ep0_out_start(GET_CORE_IF(pcd), pcd);
++}
++
++/**
++ * This functions delegates the setup command to the gadget driver.
++ */
++static inline void do_gadget_setup(dwc_otg_pcd_t *pcd,
++ struct usb_ctrlrequest * ctrl)
++{
++ int ret = 0;
++ if (pcd->driver && pcd->driver->setup) {
++ SPIN_UNLOCK(&pcd->lock);
++ ret = pcd->driver->setup(&pcd->gadget, ctrl);
++ SPIN_LOCK(&pcd->lock);
++ if (ret < 0) {
++ ep0_do_stall(pcd, ret);
++ }
++
++ /** @todo This is a g_file_storage gadget driver specific
++ * workaround: a DELAYED_STATUS result from the fsg_setup
++ * routine will result in the gadget queueing a EP0 IN status
++ * phase for a two-stage control transfer. Exactly the same as
++ * a SET_CONFIGURATION/SET_INTERFACE except that this is a class
++ * specific request. Need a generic way to know when the gadget
++ * driver will queue the status phase. Can we assume when we
++ * call the gadget driver setup() function that it will always
++ * queue and require the following flag? Need to look into
++ * this.
++ */
++
++ if (ret == 256 + 999) {
++ pcd->request_config = 1;
++ }
++ }
++}
++
++/**
++ * This function starts the Zero-Length Packet for the IN status phase
++ * of a 2 stage control transfer.
++ */
++static inline void do_setup_in_status_phase(dwc_otg_pcd_t *pcd)
++{
++ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
++ if (pcd->ep0state == EP0_STALL) {
++ return;
++ }
++
++ pcd->ep0state = EP0_IN_STATUS_PHASE;
++
++ /* Prepare for more SETUP Packets */
++ DWC_DEBUGPL(DBG_PCD, "EP0 IN ZLP\n");
++ ep0->dwc_ep.xfer_len = 0;
++ ep0->dwc_ep.xfer_count = 0;
++ ep0->dwc_ep.is_in = 1;
++ ep0->dwc_ep.dma_addr = pcd->setup_pkt_dma_handle;
++ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep);
++
++ /* Prepare for more SETUP Packets */
++// if(GET_CORE_IF(pcd)->dma_enable == 0) ep0_out_start(GET_CORE_IF(pcd), pcd);
++}
++
++/**
++ * This function starts the Zero-Length Packet for the OUT status phase
++ * of a 2 stage control transfer.
++ */
++static inline void do_setup_out_status_phase(dwc_otg_pcd_t *pcd)
++{
++ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
++ if (pcd->ep0state == EP0_STALL) {
++ DWC_DEBUGPL(DBG_PCD, "EP0 STALLED\n");
++ return;
++ }
++ pcd->ep0state = EP0_OUT_STATUS_PHASE;
++
++ DWC_DEBUGPL(DBG_PCD, "EP0 OUT ZLP\n");
++ ep0->dwc_ep.xfer_len = 0;
++ ep0->dwc_ep.xfer_count = 0;
++ ep0->dwc_ep.is_in = 0;
++ ep0->dwc_ep.dma_addr = pcd->setup_pkt_dma_handle;
++ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep);
++
++ /* Prepare for more SETUP Packets */
++ if(GET_CORE_IF(pcd)->dma_enable == 0) {
++ ep0_out_start(GET_CORE_IF(pcd), pcd);
++ }
++}
++
++/**
++ * Clear the EP halt (STALL) and if pending requests start the
++ * transfer.
++ */
++static inline void pcd_clear_halt(dwc_otg_pcd_t *pcd, dwc_otg_pcd_ep_t *ep)
++{
++ if(ep->dwc_ep.stall_clear_flag == 0)
++ dwc_otg_ep_clear_stall(GET_CORE_IF(pcd), &ep->dwc_ep);
++
++ /* Reactive the EP */
++ dwc_otg_ep_activate(GET_CORE_IF(pcd), &ep->dwc_ep);
++ if (ep->stopped) {
++ ep->stopped = 0;
++ /* If there is a request in the EP queue start it */
++
++ /** @todo FIXME: this causes an EP mismatch in DMA mode.
++ * epmismatch not yet implemented. */
++
++ /*
++ * Above fixme is solved by implmenting a tasklet to call the
++ * start_next_request(), outside of interrupt context at some
++ * time after the current time, after a clear-halt setup packet.
++ * Still need to implement ep mismatch in the future if a gadget
++ * ever uses more than one endpoint at once
++ */
++ ep->queue_sof = 1;
++ tasklet_schedule (pcd->start_xfer_tasklet);
++ }
++ /* Start Control Status Phase */
++ do_setup_in_status_phase(pcd);
++}
++
++/**
++ * This function is called when the SET_FEATURE TEST_MODE Setup packet
++ * is sent from the host. The Device Control register is written with
++ * the Test Mode bits set to the specified Test Mode. This is done as
++ * a tasklet so that the "Status" phase of the control transfer
++ * completes before transmitting the TEST packets.
++ *
++ * @todo This has not been tested since the tasklet struct was put
++ * into the PCD struct!
++ *
++ */
++static void do_test_mode(unsigned long data)
++{
++ dctl_data_t dctl;
++ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)data;
++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++ int test_mode = pcd->test_mode;
++
++
++// DWC_WARN("%s() has not been tested since being rewritten!\n", __func__);
++
++ dctl.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dctl);
++ switch (test_mode) {
++ case 1: // TEST_J
++ dctl.b.tstctl = 1;
++ break;
++
++ case 2: // TEST_K
++ dctl.b.tstctl = 2;
++ break;
++
++ case 3: // TEST_SE0_NAK
++ dctl.b.tstctl = 3;
++ break;
++
++ case 4: // TEST_PACKET
++ dctl.b.tstctl = 4;
++ break;
++
++ case 5: // TEST_FORCE_ENABLE
++ dctl.b.tstctl = 5;
++ break;
++ }
++ dwc_write_reg32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32);
++}
++
++/**
++ * This function process the GET_STATUS Setup Commands.
++ */
++static inline void do_get_status(dwc_otg_pcd_t *pcd)
++{
++ struct usb_ctrlrequest ctrl = pcd->setup_pkt->req;
++ dwc_otg_pcd_ep_t *ep;
++ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
++ uint16_t *status = pcd->status_buf;
++
++#ifdef DEBUG_EP0
++ DWC_DEBUGPL(DBG_PCD,
++ "GET_STATUS %02x.%02x v%04x i%04x l%04x\n",
++ ctrl.bRequestType, ctrl.bRequest,
++ ctrl.wValue, ctrl.wIndex, ctrl.wLength);
++#endif
++
++ switch (ctrl.bRequestType & USB_RECIP_MASK) {
++ case USB_RECIP_DEVICE:
++ *status = 0x1; /* Self powered */
++ *status |= pcd->remote_wakeup_enable << 1;
++ break;
++
++ case USB_RECIP_INTERFACE:
++ *status = 0;
++ break;
++
++ case USB_RECIP_ENDPOINT:
++ ep = get_ep_by_addr(pcd, ctrl.wIndex);
++ if (ep == 0 || ctrl.wLength > 2) {
++ ep0_do_stall(pcd, -EOPNOTSUPP);
++ return;
++ }
++ /** @todo check for EP stall */
++ *status = ep->stopped;
++ break;
++ }
++ pcd->ep0_pending = 1;
++ ep0->dwc_ep.start_xfer_buff = (uint8_t *)status;
++ ep0->dwc_ep.xfer_buff = (uint8_t *)status;
++ ep0->dwc_ep.dma_addr = pcd->status_buf_dma_handle;
++ ep0->dwc_ep.xfer_len = 2;
++ ep0->dwc_ep.xfer_count = 0;
++ ep0->dwc_ep.total_len = ep0->dwc_ep.xfer_len;
++ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep);
++}
++/**
++ * This function process the SET_FEATURE Setup Commands.
++ */
++static inline void do_set_feature(dwc_otg_pcd_t *pcd)
++{
++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++ dwc_otg_core_global_regs_t *global_regs =
++ core_if->core_global_regs;
++ struct usb_ctrlrequest ctrl = pcd->setup_pkt->req;
++ dwc_otg_pcd_ep_t *ep = 0;
++ int32_t otg_cap_param = core_if->core_params->otg_cap;
++ gotgctl_data_t gotgctl = { .d32 = 0 };
++
++ DWC_DEBUGPL(DBG_PCD, "SET_FEATURE:%02x.%02x v%04x i%04x l%04x\n",
++ ctrl.bRequestType, ctrl.bRequest,
++ ctrl.wValue, ctrl.wIndex, ctrl.wLength);
++ DWC_DEBUGPL(DBG_PCD,"otg_cap=%d\n", otg_cap_param);
++
++
++ switch (ctrl.bRequestType & USB_RECIP_MASK) {
++ case USB_RECIP_DEVICE:
++ switch (ctrl.wValue) {
++ case USB_DEVICE_REMOTE_WAKEUP:
++ pcd->remote_wakeup_enable = 1;
++ break;
++
++ case USB_DEVICE_TEST_MODE:
++ /* Setup the Test Mode tasklet to do the Test
++ * Packet generation after the SETUP Status
++ * phase has completed. */
++
++ /** @todo This has not been tested since the
++ * tasklet struct was put into the PCD
++ * struct! */
++ pcd->test_mode_tasklet.next = 0;
++ pcd->test_mode_tasklet.state = 0;
++ atomic_set(&pcd->test_mode_tasklet.count, 0);
++ pcd->test_mode_tasklet.func = do_test_mode;
++ pcd->test_mode_tasklet.data = (unsigned long)pcd;
++ pcd->test_mode = ctrl.wIndex >> 8;
++ tasklet_schedule(&pcd->test_mode_tasklet);
++ break;
++
++ case USB_DEVICE_B_HNP_ENABLE:
++ DWC_DEBUGPL(DBG_PCDV, "SET_FEATURE: USB_DEVICE_B_HNP_ENABLE\n");
++
++ /* dev may initiate HNP */
++ if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) {
++ pcd->b_hnp_enable = 1;
++ dwc_otg_pcd_update_otg(pcd, 0);
++ DWC_DEBUGPL(DBG_PCD, "Request B HNP\n");
++ /**@todo Is the gotgctl.devhnpen cleared
++ * by a USB Reset? */
++ gotgctl.b.devhnpen = 1;
++ gotgctl.b.hnpreq = 1;
++ dwc_write_reg32(&global_regs->gotgctl, gotgctl.d32);
++ }
++ else {
++ ep0_do_stall(pcd, -EOPNOTSUPP);
++ }
++ break;
++
++ case USB_DEVICE_A_HNP_SUPPORT:
++ /* RH port supports HNP */
++ DWC_DEBUGPL(DBG_PCDV, "SET_FEATURE: USB_DEVICE_A_HNP_SUPPORT\n");
++ if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) {
++ pcd->a_hnp_support = 1;
++ dwc_otg_pcd_update_otg(pcd, 0);
++ }
++ else {
++ ep0_do_stall(pcd, -EOPNOTSUPP);
++ }
++ break;
++
++ case USB_DEVICE_A_ALT_HNP_SUPPORT:
++ /* other RH port does */
++ DWC_DEBUGPL(DBG_PCDV, "SET_FEATURE: USB_DEVICE_A_ALT_HNP_SUPPORT\n");
++ if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) {
++ pcd->a_alt_hnp_support = 1;
++ dwc_otg_pcd_update_otg(pcd, 0);
++ }
++ else {
++ ep0_do_stall(pcd, -EOPNOTSUPP);
++ }
++ break;
++ }
++ do_setup_in_status_phase(pcd);
++ break;
++
++ case USB_RECIP_INTERFACE:
++ do_gadget_setup(pcd, &ctrl);
++ break;
++
++ case USB_RECIP_ENDPOINT:
++ if (ctrl.wValue == USB_ENDPOINT_HALT) {
++ ep = get_ep_by_addr(pcd, ctrl.wIndex);
++ if (ep == 0) {
++ ep0_do_stall(pcd, -EOPNOTSUPP);
++ return;
++ }
++ ep->stopped = 1;
++ dwc_otg_ep_set_stall(core_if, &ep->dwc_ep);
++ }
++ do_setup_in_status_phase(pcd);
++ break;
++ }
++}
++
++/**
++ * This function process the CLEAR_FEATURE Setup Commands.
++ */
++static inline void do_clear_feature(dwc_otg_pcd_t *pcd)
++{
++ struct usb_ctrlrequest ctrl = pcd->setup_pkt->req;
++ dwc_otg_pcd_ep_t *ep = 0;
++
++ DWC_DEBUGPL(DBG_PCD,
++ "CLEAR_FEATURE:%02x.%02x v%04x i%04x l%04x\n",
++ ctrl.bRequestType, ctrl.bRequest,
++ ctrl.wValue, ctrl.wIndex, ctrl.wLength);
++
++ switch (ctrl.bRequestType & USB_RECIP_MASK) {
++ case USB_RECIP_DEVICE:
++ switch (ctrl.wValue) {
++ case USB_DEVICE_REMOTE_WAKEUP:
++ pcd->remote_wakeup_enable = 0;
++ break;
++
++ case USB_DEVICE_TEST_MODE:
++ /** @todo Add CLEAR_FEATURE for TEST modes. */
++ break;
++ }
++ do_setup_in_status_phase(pcd);
++ break;
++
++ case USB_RECIP_ENDPOINT:
++ ep = get_ep_by_addr(pcd, ctrl.wIndex);
++ if (ep == 0) {
++ ep0_do_stall(pcd, -EOPNOTSUPP);
++ return;
++ }
++
++ pcd_clear_halt(pcd, ep);
++
++ break;
++ }
++}
++
++/**
++ * This function process the SET_ADDRESS Setup Commands.
++ */
++static inline void do_set_address(dwc_otg_pcd_t *pcd)
++{
++ dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if;
++ struct usb_ctrlrequest ctrl = pcd->setup_pkt->req;
++
++ if (ctrl.bRequestType == USB_RECIP_DEVICE) {
++ dcfg_data_t dcfg = {.d32=0};
++
++#ifdef DEBUG_EP0
++// DWC_DEBUGPL(DBG_PCDV, "SET_ADDRESS:%d\n", ctrl.wValue);
++#endif
++ dcfg.b.devaddr = ctrl.wValue;
++ dwc_modify_reg32(&dev_if->dev_global_regs->dcfg, 0, dcfg.d32);
++ do_setup_in_status_phase(pcd);
++ }
++}
++
++/**
++ * This function processes SETUP commands. In Linux, the USB Command
++ * processing is done in two places - the first being the PCD and the
++ * second in the Gadget Driver (for example, the File-Backed Storage
++ * Gadget Driver).
++ *
++ * <table>
++ * <tr><td>Command </td><td>Driver </td><td>Description</td></tr>
++ *
++ * <tr><td>GET_STATUS </td><td>PCD </td><td>Command is processed as
++ * defined in chapter 9 of the USB 2.0 Specification chapter 9
++ * </td></tr>
++ *
++ * <tr><td>CLEAR_FEATURE </td><td>PCD </td><td>The Device and Endpoint
++ * requests are the ENDPOINT_HALT feature is procesed, all others the
++ * interface requests are ignored.</td></tr>
++ *
++ * <tr><td>SET_FEATURE </td><td>PCD </td><td>The Device and Endpoint
++ * requests are processed by the PCD. Interface requests are passed
++ * to the Gadget Driver.</td></tr>
++ *
++ * <tr><td>SET_ADDRESS </td><td>PCD </td><td>Program the DCFG reg,
++ * with device address received </td></tr>
++ *
++ * <tr><td>GET_DESCRIPTOR </td><td>Gadget Driver </td><td>Return the
++ * requested descriptor</td></tr>
++ *
++ * <tr><td>SET_DESCRIPTOR </td><td>Gadget Driver </td><td>Optional -
++ * not implemented by any of the existing Gadget Drivers.</td></tr>
++ *
++ * <tr><td>SET_CONFIGURATION </td><td>Gadget Driver </td><td>Disable
++ * all EPs and enable EPs for new configuration.</td></tr>
++ *
++ * <tr><td>GET_CONFIGURATION </td><td>Gadget Driver </td><td>Return
++ * the current configuration</td></tr>
++ *
++ * <tr><td>SET_INTERFACE </td><td>Gadget Driver </td><td>Disable all
++ * EPs and enable EPs for new configuration.</td></tr>
++ *
++ * <tr><td>GET_INTERFACE </td><td>Gadget Driver </td><td>Return the
++ * current interface.</td></tr>
++ *
++ * <tr><td>SYNC_FRAME </td><td>PCD </td><td>Display debug
++ * message.</td></tr>
++ * </table>
++ *
++ * When the SETUP Phase Done interrupt occurs, the PCD SETUP commands are
++ * processed by pcd_setup. Calling the Function Driver's setup function from
++ * pcd_setup processes the gadget SETUP commands.
++ */
++static inline void pcd_setup(dwc_otg_pcd_t *pcd)
++{
++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++ struct usb_ctrlrequest ctrl = pcd->setup_pkt->req;
++ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
++
++ deptsiz0_data_t doeptsize0 = { .d32 = 0};
++
++#ifdef DEBUG_EP0
++ DWC_DEBUGPL(DBG_PCD, "SETUP %02x.%02x v%04x i%04x l%04x\n",
++ ctrl.bRequestType, ctrl.bRequest,
++ ctrl.wValue, ctrl.wIndex, ctrl.wLength);
++#endif
++
++ doeptsize0.d32 = dwc_read_reg32(&dev_if->out_ep_regs[0]->doeptsiz);
++
++ /** @todo handle > 1 setup packet , assert error for now */
++
++ if (core_if->dma_enable && core_if->dma_desc_enable == 0 && (doeptsize0.b.supcnt < 2)) {
++ DWC_ERROR ("\n\n----------- CANNOT handle > 1 setup packet in DMA mode\n\n");
++ }
++
++ /* Clean up the request queue */
++ dwc_otg_request_nuke(ep0);
++ ep0->stopped = 0;
++
++ if (ctrl.bRequestType & USB_DIR_IN) {
++ ep0->dwc_ep.is_in = 1;
++ pcd->ep0state = EP0_IN_DATA_PHASE;
++ }
++ else {
++ ep0->dwc_ep.is_in = 0;
++ pcd->ep0state = EP0_OUT_DATA_PHASE;
++ }
++
++ if(ctrl.wLength == 0) {
++ ep0->dwc_ep.is_in = 1;
++ pcd->ep0state = EP0_IN_STATUS_PHASE;
++ }
++
++ if ((ctrl.bRequestType & USB_TYPE_MASK) != USB_TYPE_STANDARD) {
++ /* handle non-standard (class/vendor) requests in the gadget driver */
++ do_gadget_setup(pcd, &ctrl);
++ return;
++ }
++
++ /** @todo NGS: Handle bad setup packet? */
++
++///////////////////////////////////////////
++//// --- Standard Request handling --- ////
++
++ switch (ctrl.bRequest) {
++ case USB_REQ_GET_STATUS:
++ do_get_status(pcd);
++ break;
++
++ case USB_REQ_CLEAR_FEATURE:
++ do_clear_feature(pcd);
++ break;
++
++ case USB_REQ_SET_FEATURE:
++ do_set_feature(pcd);
++ break;
++
++ case USB_REQ_SET_ADDRESS:
++ do_set_address(pcd);
++ break;
++
++ case USB_REQ_SET_INTERFACE:
++ case USB_REQ_SET_CONFIGURATION:
++// _pcd->request_config = 1; /* Configuration changed */
++ do_gadget_setup(pcd, &ctrl);
++ break;
++
++ case USB_REQ_SYNCH_FRAME:
++ do_gadget_setup(pcd, &ctrl);
++ break;
++
++ default:
++ /* Call the Gadget Driver's setup functions */
++ do_gadget_setup(pcd, &ctrl);
++ break;
++ }
++}
++
++/**
++ * This function completes the ep0 control transfer.
++ */
++static int32_t ep0_complete_request(dwc_otg_pcd_ep_t *ep)
++{
++ dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd);
++ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++ dwc_otg_dev_in_ep_regs_t *in_ep_regs =
++ dev_if->in_ep_regs[ep->dwc_ep.num];
++#ifdef DEBUG_EP0
++ dwc_otg_dev_out_ep_regs_t *out_ep_regs =
++ dev_if->out_ep_regs[ep->dwc_ep.num];
++#endif
++ deptsiz0_data_t deptsiz;
++ desc_sts_data_t desc_sts;
++ dwc_otg_pcd_request_t *req;
++ int is_last = 0;
++ dwc_otg_pcd_t *pcd = ep->pcd;
++
++ //DWC_DEBUGPL(DBG_PCDV, "%s() %s\n", __func__, _ep->ep.name);
++
++ if (pcd->ep0_pending && list_empty(&ep->queue)) {
++ if (ep->dwc_ep.is_in) {
++#ifdef DEBUG_EP0
++ DWC_DEBUGPL(DBG_PCDV, "Do setup OUT status phase\n");
++#endif
++ do_setup_out_status_phase(pcd);
++ }
++ else {
++#ifdef DEBUG_EP0
++ DWC_DEBUGPL(DBG_PCDV, "Do setup IN status phase\n");
++#endif
++ do_setup_in_status_phase(pcd);
++ }
++ pcd->ep0_pending = 0;
++ return 1;
++ }
++
++ if (list_empty(&ep->queue)) {
++ return 0;
++ }
++ req = list_entry(ep->queue.next, dwc_otg_pcd_request_t, queue);
++
++
++ if (pcd->ep0state == EP0_OUT_STATUS_PHASE || pcd->ep0state == EP0_IN_STATUS_PHASE) {
++ is_last = 1;
++ }
++ else if (ep->dwc_ep.is_in) {
++ deptsiz.d32 = dwc_read_reg32(&in_ep_regs->dieptsiz);
++ if(core_if->dma_desc_enable != 0)
++ desc_sts.d32 = readl(dev_if->in_desc_addr);
++#ifdef DEBUG_EP0
++ DWC_DEBUGPL(DBG_PCDV, "%s len=%d xfersize=%d pktcnt=%d\n",
++ ep->ep.name, ep->dwc_ep.xfer_len,
++ deptsiz.b.xfersize, deptsiz.b.pktcnt);
++#endif
++
++ if (((core_if->dma_desc_enable == 0) && (deptsiz.b.xfersize == 0)) ||
++ ((core_if->dma_desc_enable != 0) && (desc_sts.b.bytes == 0))) {
++ req->req.actual = ep->dwc_ep.xfer_count;
++ /* Is a Zero Len Packet needed? */
++ if (req->req.zero) {
++#ifdef DEBUG_EP0
++ DWC_DEBUGPL(DBG_PCD, "Setup Rx ZLP\n");
++#endif
++ req->req.zero = 0;
++ }
++ do_setup_out_status_phase(pcd);
++ }
++ }
++ else {
++ /* ep0-OUT */
++#ifdef DEBUG_EP0
++ deptsiz.d32 = dwc_read_reg32(&out_ep_regs->doeptsiz);
++ DWC_DEBUGPL(DBG_PCDV, "%s len=%d xsize=%d pktcnt=%d\n",
++ ep->ep.name, ep->dwc_ep.xfer_len,
++ deptsiz.b.xfersize,
++ deptsiz.b.pktcnt);
++#endif
++ req->req.actual = ep->dwc_ep.xfer_count;
++ /* Is a Zero Len Packet needed? */
++ if (req->req.zero) {
++#ifdef DEBUG_EP0
++ DWC_DEBUGPL(DBG_PCDV, "Setup Tx ZLP\n");
++#endif
++ req->req.zero = 0;
++ }
++ if(core_if->dma_desc_enable == 0)
++ do_setup_in_status_phase(pcd);
++ }
++
++ /* Complete the request */
++ if (is_last) {
++ dwc_otg_request_done(ep, req, 0);
++ ep->dwc_ep.start_xfer_buff = 0;
++ ep->dwc_ep.xfer_buff = 0;
++ ep->dwc_ep.xfer_len = 0;
++ return 1;
++ }
++ return 0;
++}
++
++/**
++ * This function completes the request for the EP. If there are
++ * additional requests for the EP in the queue they will be started.
++ */
++static void complete_ep(dwc_otg_pcd_ep_t *ep)
++{
++ dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd);
++ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++ dwc_otg_dev_in_ep_regs_t *in_ep_regs =
++ dev_if->in_ep_regs[ep->dwc_ep.num];
++ deptsiz_data_t deptsiz;
++ desc_sts_data_t desc_sts;
++ dwc_otg_pcd_request_t *req = 0;
++ dwc_otg_dma_desc_t* dma_desc;
++ uint32_t byte_count = 0;
++ int is_last = 0;
++ int i;
++
++ DWC_DEBUGPL(DBG_PCDV,"%s() %s-%s\n", __func__, ep->ep.name,
++ (ep->dwc_ep.is_in?"IN":"OUT"));
++
++ /* Get any pending requests */
++ if (!list_empty(&ep->queue)) {
++ req = list_entry(ep->queue.next, dwc_otg_pcd_request_t,
++ queue);
++ if (!req) {
++ printk("complete_ep 0x%p, req = NULL!\n", ep);
++ return;
++ }
++ }
++ else {
++ printk("complete_ep 0x%p, ep->queue empty!\n", ep);
++ return;
++ }
++ DWC_DEBUGPL(DBG_PCD, "Requests %d\n", ep->pcd->request_pending);
++
++ if (ep->dwc_ep.is_in) {
++ deptsiz.d32 = dwc_read_reg32(&in_ep_regs->dieptsiz);
++
++ if (core_if->dma_enable) {
++ if(core_if->dma_desc_enable == 0) {
++ if (deptsiz.b.xfersize == 0 && deptsiz.b.pktcnt == 0) {
++ byte_count = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
++
++ ep->dwc_ep.xfer_buff += byte_count;
++ ep->dwc_ep.dma_addr += byte_count;
++ ep->dwc_ep.xfer_count += byte_count;
++
++ DWC_DEBUGPL(DBG_PCDV, "%s len=%d xfersize=%d pktcnt=%d\n",
++ ep->ep.name, ep->dwc_ep.xfer_len,
++ deptsiz.b.xfersize, deptsiz.b.pktcnt);
++
++
++ if(ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) {
++ dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep);
++ } else if(ep->dwc_ep.sent_zlp) {
++ /*
++ * This fragment of code should initiate 0
++ * length trasfer in case if it is queued
++ * a trasfer with size divisible to EPs max
++ * packet size and with usb_request zero field
++ * is set, which means that after data is transfered,
++ * it is also should be transfered
++ * a 0 length packet at the end. For Slave and
++ * Buffer DMA modes in this case SW has
++ * to initiate 2 transfers one with transfer size,
++ * and the second with 0 size. For Desriptor
++ * DMA mode SW is able to initiate a transfer,
++ * which will handle all the packets including
++ * the last 0 legth.
++ */
++ ep->dwc_ep.sent_zlp = 0;
++ dwc_otg_ep_start_zl_transfer(core_if, &ep->dwc_ep);
++ } else {
++ is_last = 1;
++ }
++ } else {
++ DWC_WARN("Incomplete transfer (%s-%s [siz=%d pkt=%d])\n",
++ ep->ep.name, (ep->dwc_ep.is_in?"IN":"OUT"),
++ deptsiz.b.xfersize, deptsiz.b.pktcnt);
++ }
++ } else {
++ dma_desc = ep->dwc_ep.desc_addr;
++ byte_count = 0;
++ ep->dwc_ep.sent_zlp = 0;
++
++ for(i = 0; i < ep->dwc_ep.desc_cnt; ++i) {
++ desc_sts.d32 = readl(dma_desc);
++ byte_count += desc_sts.b.bytes;
++ dma_desc++;
++ }
++
++ if(byte_count == 0) {
++ ep->dwc_ep.xfer_count = ep->dwc_ep.total_len;
++ is_last = 1;
++ } else {
++ DWC_WARN("Incomplete transfer\n");
++ }
++ }
++ } else {
++ if (deptsiz.b.xfersize == 0 && deptsiz.b.pktcnt == 0) {
++ /* Check if the whole transfer was completed,
++ * if no, setup transfer for next portion of data
++ */
++ DWC_DEBUGPL(DBG_PCDV, "%s len=%d xfersize=%d pktcnt=%d\n",
++ ep->ep.name, ep->dwc_ep.xfer_len,
++ deptsiz.b.xfersize, deptsiz.b.pktcnt);
++ if(ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) {
++ dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep);
++ } else if(ep->dwc_ep.sent_zlp) {
++ /*
++ * This fragment of code should initiate 0
++ * length trasfer in case if it is queued
++ * a trasfer with size divisible to EPs max
++ * packet size and with usb_request zero field
++ * is set, which means that after data is transfered,
++ * it is also should be transfered
++ * a 0 length packet at the end. For Slave and
++ * Buffer DMA modes in this case SW has
++ * to initiate 2 transfers one with transfer size,
++ * and the second with 0 size. For Desriptor
++ * DMA mode SW is able to initiate a transfer,
++ * which will handle all the packets including
++ * the last 0 legth.
++ */
++ ep->dwc_ep.sent_zlp = 0;
++ dwc_otg_ep_start_zl_transfer(core_if, &ep->dwc_ep);
++ } else {
++ is_last = 1;
++ }
++ }
++ else {
++ DWC_WARN("Incomplete transfer (%s-%s [siz=%d pkt=%d])\n",
++ ep->ep.name, (ep->dwc_ep.is_in?"IN":"OUT"),
++ deptsiz.b.xfersize, deptsiz.b.pktcnt);
++ }
++ }
++ } else {
++ dwc_otg_dev_out_ep_regs_t *out_ep_regs =
++ dev_if->out_ep_regs[ep->dwc_ep.num];
++ desc_sts.d32 = 0;
++ if(core_if->dma_enable) {
++ if(core_if->dma_desc_enable) {
++ dma_desc = ep->dwc_ep.desc_addr;
++ byte_count = 0;
++ ep->dwc_ep.sent_zlp = 0;
++ for(i = 0; i < ep->dwc_ep.desc_cnt; ++i) {
++ desc_sts.d32 = readl(dma_desc);
++ byte_count += desc_sts.b.bytes;
++ dma_desc++;
++ }
++
++ ep->dwc_ep.xfer_count = ep->dwc_ep.total_len
++ - byte_count + ((4 - (ep->dwc_ep.total_len & 0x3)) & 0x3);
++ is_last = 1;
++ } else {
++ deptsiz.d32 = 0;
++ deptsiz.d32 = dwc_read_reg32(&out_ep_regs->doeptsiz);
++
++ byte_count = (ep->dwc_ep.xfer_len -
++ ep->dwc_ep.xfer_count - deptsiz.b.xfersize);
++ ep->dwc_ep.xfer_buff += byte_count;
++ ep->dwc_ep.dma_addr += byte_count;
++ ep->dwc_ep.xfer_count += byte_count;
++
++ /* Check if the whole transfer was completed,
++ * if no, setup transfer for next portion of data
++ */
++ if(ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) {
++ dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep);
++ }
++ else if(ep->dwc_ep.sent_zlp) {
++ /*
++ * This fragment of code should initiate 0
++ * length trasfer in case if it is queued
++ * a trasfer with size divisible to EPs max
++ * packet size and with usb_request zero field
++ * is set, which means that after data is transfered,
++ * it is also should be transfered
++ * a 0 length packet at the end. For Slave and
++ * Buffer DMA modes in this case SW has
++ * to initiate 2 transfers one with transfer size,
++ * and the second with 0 size. For Desriptor
++ * DMA mode SW is able to initiate a transfer,
++ * which will handle all the packets including
++ * the last 0 legth.
++ */
++ ep->dwc_ep.sent_zlp = 0;
++ dwc_otg_ep_start_zl_transfer(core_if, &ep->dwc_ep);
++ } else {
++ is_last = 1;
++ }
++ }
++ } else {
++ /* Check if the whole transfer was completed,
++ * if no, setup transfer for next portion of data
++ */
++ if(ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) {
++ dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep);
++ }
++ else if(ep->dwc_ep.sent_zlp) {
++ /*
++ * This fragment of code should initiate 0
++ * length trasfer in case if it is queued
++ * a trasfer with size divisible to EPs max
++ * packet size and with usb_request zero field
++ * is set, which means that after data is transfered,
++ * it is also should be transfered
++ * a 0 length packet at the end. For Slave and
++ * Buffer DMA modes in this case SW has
++ * to initiate 2 transfers one with transfer size,
++ * and the second with 0 size. For Desriptor
++ * DMA mode SW is able to initiate a transfer,
++ * which will handle all the packets including
++ * the last 0 legth.
++ */
++ ep->dwc_ep.sent_zlp = 0;
++ dwc_otg_ep_start_zl_transfer(core_if, &ep->dwc_ep);
++ } else {
++ is_last = 1;
++ }
++ }
++
++#ifdef DEBUG
++
++ DWC_DEBUGPL(DBG_PCDV, "addr %p, %s len=%d cnt=%d xsize=%d pktcnt=%d\n",
++ &out_ep_regs->doeptsiz, ep->ep.name, ep->dwc_ep.xfer_len,
++ ep->dwc_ep.xfer_count,
++ deptsiz.b.xfersize,
++ deptsiz.b.pktcnt);
++#endif
++ }
++
++ /* Complete the request */
++ if (is_last) {
++ req->req.actual = ep->dwc_ep.xfer_count;
++
++ dwc_otg_request_done(ep, req, 0);
++
++ ep->dwc_ep.start_xfer_buff = 0;
++ ep->dwc_ep.xfer_buff = 0;
++ ep->dwc_ep.xfer_len = 0;
++
++ /* If there is a request in the queue start it.*/
++ start_next_request(ep);
++ }
++}
++
++
++#ifdef DWC_EN_ISOC
++
++/**
++ * This function BNA interrupt for Isochronous EPs
++ *
++ */
++static void dwc_otg_pcd_handle_iso_bna(dwc_otg_pcd_ep_t *ep)
++{
++ dwc_ep_t *dwc_ep = &ep->dwc_ep;
++ volatile uint32_t *addr;
++ depctl_data_t depctl = {.d32 = 0};
++ dwc_otg_pcd_t *pcd = ep->pcd;
++ dwc_otg_dma_desc_t *dma_desc;
++ int i;
++
++ dma_desc = dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * (dwc_ep->proc_buf_num);
++
++ if(dwc_ep->is_in) {
++ desc_sts_data_t sts = {.d32 = 0};
++ for(i = 0;i < dwc_ep->desc_cnt; ++i, ++dma_desc)
++ {
++ sts.d32 = readl(&dma_desc->status);
++ sts.b_iso_in.bs = BS_HOST_READY;
++ writel(sts.d32,&dma_desc->status);
++ }
++ }
++ else {
++ desc_sts_data_t sts = {.d32 = 0};
++ for(i = 0;i < dwc_ep->desc_cnt; ++i, ++dma_desc)
++ {
++ sts.d32 = readl(&dma_desc->status);
++ sts.b_iso_out.bs = BS_HOST_READY;
++ writel(sts.d32,&dma_desc->status);
++ }
++ }
++
++ if(dwc_ep->is_in == 0){
++ addr = &GET_CORE_IF(pcd)->dev_if->out_ep_regs[dwc_ep->num]->doepctl;
++ }
++ else{
++ addr = &GET_CORE_IF(pcd)->dev_if->in_ep_regs[dwc_ep->num]->diepctl;
++ }
++ depctl.b.epena = 1;
++ dwc_modify_reg32(addr,depctl.d32,depctl.d32);
++}
++
++/**
++ * This function sets latest iso packet information(non-PTI mode)
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ *
++ */
++void set_current_pkt_info(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++ deptsiz_data_t deptsiz = { .d32 = 0 };
++ dma_addr_t dma_addr;
++ uint32_t offset;
++
++ if(ep->proc_buf_num)
++ dma_addr = ep->dma_addr1;
++ else
++ dma_addr = ep->dma_addr0;
++
++
++ if(ep->is_in) {
++ deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz);
++ offset = ep->data_per_frame;
++ } else {
++ deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doeptsiz);
++ offset = ep->data_per_frame + (0x4 & (0x4 - (ep->data_per_frame & 0x3)));
++ }
++
++ if(!deptsiz.b.xfersize) {
++ ep->pkt_info[ep->cur_pkt].length = ep->data_per_frame;
++ ep->pkt_info[ep->cur_pkt].offset = ep->cur_pkt_dma_addr - dma_addr;
++ ep->pkt_info[ep->cur_pkt].status = 0;
++ } else {
++ ep->pkt_info[ep->cur_pkt].length = ep->data_per_frame;
++ ep->pkt_info[ep->cur_pkt].offset = ep->cur_pkt_dma_addr - dma_addr;
++ ep->pkt_info[ep->cur_pkt].status = -ENODATA;
++ }
++ ep->cur_pkt_addr += offset;
++ ep->cur_pkt_dma_addr += offset;
++ ep->cur_pkt++;
++}
++
++/**
++ * This function sets latest iso packet information(DDMA mode)
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param dwc_ep The EP to start the transfer on.
++ *
++ */
++static void set_ddma_iso_pkts_info(dwc_otg_core_if_t *core_if, dwc_ep_t *dwc_ep)
++{
++ dwc_otg_dma_desc_t* dma_desc;
++ desc_sts_data_t sts = {.d32 = 0};
++ iso_pkt_info_t *iso_packet;
++ uint32_t data_per_desc;
++ uint32_t offset;
++ int i, j;
++
++ iso_packet = dwc_ep->pkt_info;
++
++ /** Reinit closed DMA Descriptors*/
++ /** ISO OUT EP */
++ if(dwc_ep->is_in == 0) {
++ dma_desc = dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * dwc_ep->proc_buf_num;
++ offset = 0;
++
++ for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm)
++ {
++ for(j = 0; j < dwc_ep->pkt_per_frm; ++j)
++ {
++ data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
++ dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++ data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
++
++ sts.d32 = readl(&dma_desc->status);
++
++ /* Write status in iso_packet_decsriptor */
++ iso_packet->status = sts.b_iso_out.rxsts + (sts.b_iso_out.bs^BS_DMA_DONE);
++ if(iso_packet->status) {
++ iso_packet->status = -ENODATA;
++ }
++
++ /* Received data length */
++ if(!sts.b_iso_out.rxbytes){
++ iso_packet->length = data_per_desc - sts.b_iso_out.rxbytes;
++ } else {
++ iso_packet->length = data_per_desc - sts.b_iso_out.rxbytes +
++ (4 - dwc_ep->data_per_frame % 4);
++ }
++
++ iso_packet->offset = offset;
++
++ offset += data_per_desc;
++ dma_desc ++;
++ iso_packet ++;
++ }
++ }
++
++ for(j = 0; j < dwc_ep->pkt_per_frm - 1; ++j)
++ {
++ data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
++ dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++ data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
++
++ sts.d32 = readl(&dma_desc->status);
++
++ /* Write status in iso_packet_decsriptor */
++ iso_packet->status = sts.b_iso_out.rxsts + (sts.b_iso_out.bs^BS_DMA_DONE);
++ if(iso_packet->status) {
++ iso_packet->status = -ENODATA;
++ }
++
++ /* Received data length */
++ iso_packet->length = dwc_ep->data_per_frame - sts.b_iso_out.rxbytes;
++
++ iso_packet->offset = offset;
++
++ offset += data_per_desc;
++ iso_packet++;
++ dma_desc++;
++ }
++
++ sts.d32 = readl(&dma_desc->status);
++
++ /* Write status in iso_packet_decsriptor */
++ iso_packet->status = sts.b_iso_out.rxsts + (sts.b_iso_out.bs^BS_DMA_DONE);
++ if(iso_packet->status) {
++ iso_packet->status = -ENODATA;
++ }
++ /* Received data length */
++ if(!sts.b_iso_out.rxbytes){
++ iso_packet->length = dwc_ep->data_per_frame - sts.b_iso_out.rxbytes;
++ } else {
++ iso_packet->length = dwc_ep->data_per_frame - sts.b_iso_out.rxbytes +
++ (4 - dwc_ep->data_per_frame % 4);
++ }
++
++ iso_packet->offset = offset;
++ }
++ else /** ISO IN EP */
++ {
++ dma_desc = dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * dwc_ep->proc_buf_num;
++
++ for(i = 0; i < dwc_ep->desc_cnt - 1; i++)
++ {
++ sts.d32 = readl(&dma_desc->status);
++
++ /* Write status in iso packet descriptor */
++ iso_packet->status = sts.b_iso_in.txsts + (sts.b_iso_in.bs^BS_DMA_DONE);
++ if(iso_packet->status != 0) {
++ iso_packet->status = -ENODATA;
++
++ }
++ /* Bytes has been transfered */
++ iso_packet->length = dwc_ep->data_per_frame - sts.b_iso_in.txbytes;
++
++ dma_desc ++;
++ iso_packet++;
++ }
++
++ sts.d32 = readl(&dma_desc->status);
++ while(sts.b_iso_in.bs == BS_DMA_BUSY) {
++ sts.d32 = readl(&dma_desc->status);
++ }
++
++ /* Write status in iso packet descriptor ??? do be done with ERROR codes*/
++ iso_packet->status = sts.b_iso_in.txsts + (sts.b_iso_in.bs^BS_DMA_DONE);
++ if(iso_packet->status != 0) {
++ iso_packet->status = -ENODATA;
++ }
++
++ /* Bytes has been transfered */
++ iso_packet->length = dwc_ep->data_per_frame - sts.b_iso_in.txbytes;
++ }
++}
++
++/**
++ * This function reinitialize DMA Descriptors for Isochronous transfer
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param dwc_ep The EP to start the transfer on.
++ *
++ */
++static void reinit_ddma_iso_xfer(dwc_otg_core_if_t *core_if, dwc_ep_t *dwc_ep)
++{
++ int i, j;
++ dwc_otg_dma_desc_t* dma_desc;
++ dma_addr_t dma_ad;
++ volatile uint32_t *addr;
++ desc_sts_data_t sts = { .d32 =0 };
++ uint32_t data_per_desc;
++
++ if(dwc_ep->is_in == 0) {
++ addr = &core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl;
++ }
++ else {
++ addr = &core_if->dev_if->in_ep_regs[dwc_ep->num]->diepctl;
++ }
++
++
++ if(dwc_ep->proc_buf_num == 0) {
++ /** Buffer 0 descriptors setup */
++ dma_ad = dwc_ep->dma_addr0;
++ }
++ else {
++ /** Buffer 1 descriptors setup */
++ dma_ad = dwc_ep->dma_addr1;
++ }
++
++
++ /** Reinit closed DMA Descriptors*/
++ /** ISO OUT EP */
++ if(dwc_ep->is_in == 0) {
++ dma_desc = dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * dwc_ep->proc_buf_num;
++
++ sts.b_iso_out.bs = BS_HOST_READY;
++ sts.b_iso_out.rxsts = 0;
++ sts.b_iso_out.l = 0;
++ sts.b_iso_out.sp = 0;
++ sts.b_iso_out.ioc = 0;
++ sts.b_iso_out.pid = 0;
++ sts.b_iso_out.framenum = 0;
++
++ for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm)
++ {
++ for(j = 0; j < dwc_ep->pkt_per_frm; ++j)
++ {
++ data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
++ dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++ data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
++ sts.b_iso_out.rxbytes = data_per_desc;
++ writel((uint32_t)dma_ad, &dma_desc->buf);
++ writel(sts.d32, &dma_desc->status);
++
++ (uint32_t)dma_ad += data_per_desc;
++ dma_desc ++;
++ }
++ }
++
++ for(j = 0; j < dwc_ep->pkt_per_frm - 1; ++j)
++ {
++
++ data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
++ dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++ data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
++ sts.b_iso_out.rxbytes = data_per_desc;
++
++ writel((uint32_t)dma_ad, &dma_desc->buf);
++ writel(sts.d32, &dma_desc->status);
++
++ dma_desc++;
++ (uint32_t)dma_ad += data_per_desc;
++ }
++
++ sts.b_iso_out.ioc = 1;
++ sts.b_iso_out.l = dwc_ep->proc_buf_num;
++
++ data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
++ dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++ data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
++ sts.b_iso_out.rxbytes = data_per_desc;
++
++ writel((uint32_t)dma_ad, &dma_desc->buf);
++ writel(sts.d32, &dma_desc->status);
++ }
++ else /** ISO IN EP */
++ {
++ dma_desc = dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * dwc_ep->proc_buf_num;
++
++ sts.b_iso_in.bs = BS_HOST_READY;
++ sts.b_iso_in.txsts = 0;
++ sts.b_iso_in.sp = 0;
++ sts.b_iso_in.ioc = 0;
++ sts.b_iso_in.pid = dwc_ep->pkt_per_frm;
++ sts.b_iso_in.framenum = dwc_ep->next_frame;
++ sts.b_iso_in.txbytes = dwc_ep->data_per_frame;
++ sts.b_iso_in.l = 0;
++
++ for(i = 0; i < dwc_ep->desc_cnt - 1; i++)
++ {
++ writel((uint32_t)dma_ad, &dma_desc->buf);
++ writel(sts.d32, &dma_desc->status);
++
++ sts.b_iso_in.framenum += dwc_ep->bInterval;
++ (uint32_t)dma_ad += dwc_ep->data_per_frame;
++ dma_desc ++;
++ }
++
++ sts.b_iso_in.ioc = 1;
++ sts.b_iso_in.l = dwc_ep->proc_buf_num;
++
++ writel((uint32_t)dma_ad, &dma_desc->buf);
++ writel(sts.d32, &dma_desc->status);
++
++ dwc_ep->next_frame = sts.b_iso_in.framenum + dwc_ep->bInterval * 1;
++ }
++ dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
++}
++
++
++/**
++ * This function is to handle Iso EP transfer complete interrupt
++ * in case Iso out packet was dropped
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param dwc_ep The EP for wihich transfer complete was asserted
++ *
++ */
++static uint32_t handle_iso_out_pkt_dropped(dwc_otg_core_if_t *core_if, dwc_ep_t *dwc_ep)
++{
++ uint32_t dma_addr;
++ uint32_t drp_pkt;
++ uint32_t drp_pkt_cnt;
++ deptsiz_data_t deptsiz = { .d32 = 0 };
++ depctl_data_t depctl = { .d32 = 0 };
++ int i;
++
++ deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doeptsiz);
++
++ drp_pkt = dwc_ep->pkt_cnt - deptsiz.b.pktcnt;
++ drp_pkt_cnt = dwc_ep->pkt_per_frm - (drp_pkt % dwc_ep->pkt_per_frm);
++
++ /* Setting dropped packets status */
++ for(i = 0; i < drp_pkt_cnt; ++i) {
++ dwc_ep->pkt_info[drp_pkt].status = -ENODATA;
++ drp_pkt ++;
++ deptsiz.b.pktcnt--;
++ }
++
++
++ if(deptsiz.b.pktcnt > 0) {
++ deptsiz.b.xfersize = dwc_ep->xfer_len - (dwc_ep->pkt_cnt - deptsiz.b.pktcnt) * dwc_ep->maxpacket;
++ } else {
++ deptsiz.b.xfersize = 0;
++ deptsiz.b.pktcnt = 0;
++ }
++
++ dwc_write_reg32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doeptsiz, deptsiz.d32);
++
++ if(deptsiz.b.pktcnt > 0) {
++ if(dwc_ep->proc_buf_num) {
++ dma_addr = dwc_ep->dma_addr1 + dwc_ep->xfer_len - deptsiz.b.xfersize;
++ } else {
++ dma_addr = dwc_ep->dma_addr0 + dwc_ep->xfer_len - deptsiz.b.xfersize;;
++ }
++
++ dwc_write_reg32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doepdma, dma_addr);
++
++ /** Re-enable endpoint, clear nak */
++ depctl.d32 = 0;
++ depctl.b.epena = 1;
++ depctl.b.cnak = 1;
++
++ dwc_modify_reg32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl,
++ depctl.d32,depctl.d32);
++ return 0;
++ } else {
++ return 1;
++ }
++}
++
++/**
++ * This function sets iso packets information(PTI mode)
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ *
++ */
++static uint32_t set_iso_pkts_info(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
++{
++ int i, j;
++ dma_addr_t dma_ad;
++ iso_pkt_info_t *packet_info = ep->pkt_info;
++ uint32_t offset;
++ uint32_t frame_data;
++ deptsiz_data_t deptsiz;
++
++ if(ep->proc_buf_num == 0) {
++ /** Buffer 0 descriptors setup */
++ dma_ad = ep->dma_addr0;
++ }
++ else {
++ /** Buffer 1 descriptors setup */
++ dma_ad = ep->dma_addr1;
++ }
++
++
++ if(ep->is_in) {
++ deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz);
++ } else {
++ deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doeptsiz);
++ }
++
++ if(!deptsiz.b.xfersize) {
++ offset = 0;
++ for(i = 0; i < ep->pkt_cnt; i += ep->pkt_per_frm)
++ {
++ frame_data = ep->data_per_frame;
++ for(j = 0; j < ep->pkt_per_frm; ++j) {
++
++ /* Packet status - is not set as initially
++ * it is set to 0 and if packet was sent
++ successfully, status field will remain 0*/
++
++
++ /* Bytes has been transfered */
++ packet_info->length = (ep->maxpacket < frame_data) ?
++ ep->maxpacket : frame_data;
++
++ /* Received packet offset */
++ packet_info->offset = offset;
++ offset += packet_info->length;
++ frame_data -= packet_info->length;
++
++ packet_info ++;
++ }
++ }
++ return 1;
++ } else {
++ /* This is a workaround for in case of Transfer Complete with
++ * PktDrpSts interrupts merging - in this case Transfer complete
++ * interrupt for Isoc Out Endpoint is asserted without PktDrpSts
++ * set and with DOEPTSIZ register non zero. Investigations showed,
++ * that this happens when Out packet is dropped, but because of
++ * interrupts merging during first interrupt handling PktDrpSts
++ * bit is cleared and for next merged interrupts it is not reset.
++ * In this case SW hadles the interrupt as if PktDrpSts bit is set.
++ */
++ if(ep->is_in) {
++ return 1;
++ } else {
++ return handle_iso_out_pkt_dropped(core_if, ep);
++ }
++ }
++}
++
++/**
++ * This function is to handle Iso EP transfer complete interrupt
++ *
++ * @param ep The EP for which transfer complete was asserted
++ *
++ */
++static void complete_iso_ep(dwc_otg_pcd_ep_t *ep)
++{
++ dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd);
++ dwc_ep_t *dwc_ep = &ep->dwc_ep;
++ uint8_t is_last = 0;
++
++ if(core_if->dma_enable) {
++ if(core_if->dma_desc_enable) {
++ set_ddma_iso_pkts_info(core_if, dwc_ep);
++ reinit_ddma_iso_xfer(core_if, dwc_ep);
++ is_last = 1;
++ } else {
++ if(core_if->pti_enh_enable) {
++ if(set_iso_pkts_info(core_if, dwc_ep)) {
++ dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
++ dwc_otg_iso_ep_start_buf_transfer(core_if, dwc_ep);
++ is_last = 1;
++ }
++ } else {
++ set_current_pkt_info(core_if, dwc_ep);
++ if(dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) {
++ is_last = 1;
++ dwc_ep->cur_pkt = 0;
++ dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
++ if(dwc_ep->proc_buf_num) {
++ dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff1;
++ dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr1;
++ } else {
++ dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff0;
++ dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr0;
++ }
++
++ }
++ dwc_otg_iso_ep_start_frm_transfer(core_if, dwc_ep);
++ }
++ }
++ } else {
++ set_current_pkt_info(core_if, dwc_ep);
++ if(dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) {
++ is_last = 1;
++ dwc_ep->cur_pkt = 0;
++ dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
++ if(dwc_ep->proc_buf_num) {
++ dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff1;
++ dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr1;
++ } else {
++ dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff0;
++ dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr0;
++ }
++
++ }
++ dwc_otg_iso_ep_start_frm_transfer(core_if, dwc_ep);
++ }
++ if(is_last)
++ dwc_otg_iso_buffer_done(ep, ep->iso_req);
++}
++
++#endif //DWC_EN_ISOC
++
++
++/**
++ * This function handles EP0 Control transfers.
++ *
++ * The state of the control tranfers are tracked in
++ * <code>ep0state</code>.
++ */
++static void handle_ep0(dwc_otg_pcd_t *pcd)
++{
++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
++ desc_sts_data_t desc_sts;
++ deptsiz0_data_t deptsiz;
++ uint32_t byte_count;
++
++#ifdef DEBUG_EP0
++ DWC_DEBUGPL(DBG_PCDV, "%s()\n", __func__);
++ print_ep0_state(pcd);
++#endif
++
++ switch (pcd->ep0state) {
++ case EP0_DISCONNECT:
++ break;
++
++ case EP0_IDLE:
++ pcd->request_config = 0;
++
++ pcd_setup(pcd);
++ break;
++
++ case EP0_IN_DATA_PHASE:
++#ifdef DEBUG_EP0
++ DWC_DEBUGPL(DBG_PCD, "DATA_IN EP%d-%s: type=%d, mps=%d\n",
++ ep0->dwc_ep.num, (ep0->dwc_ep.is_in ?"IN":"OUT"),
++ ep0->dwc_ep.type, ep0->dwc_ep.maxpacket);
++#endif
++
++ if (core_if->dma_enable != 0) {
++ /*
++ * For EP0 we can only program 1 packet at a time so we
++ * need to do the make calculations after each complete.
++ * Call write_packet to make the calculations, as in
++ * slave mode, and use those values to determine if we
++ * can complete.
++ */
++ if(core_if->dma_desc_enable == 0) {
++ deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[0]->dieptsiz);
++ byte_count = ep0->dwc_ep.xfer_len - deptsiz.b.xfersize;
++ }
++ else {
++ desc_sts.d32 = readl(core_if->dev_if->in_desc_addr);
++ byte_count = ep0->dwc_ep.xfer_len - desc_sts.b.bytes;
++ }
++ ep0->dwc_ep.xfer_count += byte_count;
++ ep0->dwc_ep.xfer_buff += byte_count;
++ ep0->dwc_ep.dma_addr += byte_count;
++ }
++ if (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len) {
++ dwc_otg_ep0_continue_transfer (GET_CORE_IF(pcd), &ep0->dwc_ep);
++ DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n");
++ }
++ else if(ep0->dwc_ep.sent_zlp) {
++ dwc_otg_ep0_continue_transfer (GET_CORE_IF(pcd), &ep0->dwc_ep);
++ ep0->dwc_ep.sent_zlp = 0;
++ DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n");
++ }
++ else {
++ ep0_complete_request(ep0);
++ DWC_DEBUGPL(DBG_PCD, "COMPLETE TRANSFER\n");
++ }
++ break;
++ case EP0_OUT_DATA_PHASE:
++#ifdef DEBUG_EP0
++ DWC_DEBUGPL(DBG_PCD, "DATA_OUT EP%d-%s: type=%d, mps=%d\n",
++ ep0->dwc_ep.num, (ep0->dwc_ep.is_in ?"IN":"OUT"),
++ ep0->dwc_ep.type, ep0->dwc_ep.maxpacket);
++#endif
++ if (core_if->dma_enable != 0) {
++ if(core_if->dma_desc_enable == 0) {
++ deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->out_ep_regs[0]->doeptsiz);
++ byte_count = ep0->dwc_ep.maxpacket - deptsiz.b.xfersize;
++ }
++ else {
++ desc_sts.d32 = readl(core_if->dev_if->out_desc_addr);
++ byte_count = ep0->dwc_ep.maxpacket - desc_sts.b.bytes;
++ }
++ ep0->dwc_ep.xfer_count += byte_count;
++ ep0->dwc_ep.xfer_buff += byte_count;
++ ep0->dwc_ep.dma_addr += byte_count;
++ }
++ if (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len) {
++ dwc_otg_ep0_continue_transfer (GET_CORE_IF(pcd), &ep0->dwc_ep);
++ DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n");
++ }
++ else if(ep0->dwc_ep.sent_zlp) {
++ dwc_otg_ep0_continue_transfer (GET_CORE_IF(pcd), &ep0->dwc_ep);
++ ep0->dwc_ep.sent_zlp = 0;
++ DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n");
++ }
++ else {
++ ep0_complete_request(ep0);
++ DWC_DEBUGPL(DBG_PCD, "COMPLETE TRANSFER\n");
++ }
++ break;
++
++
++ case EP0_IN_STATUS_PHASE:
++ case EP0_OUT_STATUS_PHASE:
++ DWC_DEBUGPL(DBG_PCD, "CASE: EP0_STATUS\n");
++ ep0_complete_request(ep0);
++ pcd->ep0state = EP0_IDLE;
++ ep0->stopped = 1;
++ ep0->dwc_ep.is_in = 0; /* OUT for next SETUP */
++
++ /* Prepare for more SETUP Packets */
++ if(core_if->dma_enable) {
++ ep0_out_start(core_if, pcd);
++ }
++ break;
++
++ case EP0_STALL:
++ DWC_ERROR("EP0 STALLed, should not get here pcd_setup()\n");
++ break;
++ }
++#ifdef DEBUG_EP0
++ print_ep0_state(pcd);
++#endif
++}
++
++
++/**
++ * Restart transfer
++ */
++static void restart_transfer(dwc_otg_pcd_t *pcd, const uint32_t epnum)
++{
++ dwc_otg_core_if_t *core_if;
++ dwc_otg_dev_if_t *dev_if;
++ deptsiz_data_t dieptsiz = {.d32=0};
++ dwc_otg_pcd_ep_t *ep;
++
++ ep = get_in_ep(pcd, epnum);
++
++#ifdef DWC_EN_ISOC
++ if(ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) {
++ return;
++ }
++#endif /* DWC_EN_ISOC */
++
++ core_if = GET_CORE_IF(pcd);
++ dev_if = core_if->dev_if;
++
++ dieptsiz.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dieptsiz);
++
++ DWC_DEBUGPL(DBG_PCD,"xfer_buff=%p xfer_count=%0x xfer_len=%0x"
++ " stopped=%d\n", ep->dwc_ep.xfer_buff,
++ ep->dwc_ep.xfer_count, ep->dwc_ep.xfer_len ,
++ ep->stopped);
++ /*
++ * If xfersize is 0 and pktcnt in not 0, resend the last packet.
++ */
++ if (dieptsiz.b.pktcnt && dieptsiz.b.xfersize == 0 &&
++ ep->dwc_ep.start_xfer_buff != 0) {
++ if (ep->dwc_ep.total_len <= ep->dwc_ep.maxpacket) {
++ ep->dwc_ep.xfer_count = 0;
++ ep->dwc_ep.xfer_buff = ep->dwc_ep.start_xfer_buff;
++ ep->dwc_ep.xfer_len = ep->dwc_ep.xfer_count;
++ }
++ else {
++ ep->dwc_ep.xfer_count -= ep->dwc_ep.maxpacket;
++ /* convert packet size to dwords. */
++ ep->dwc_ep.xfer_buff -= ep->dwc_ep.maxpacket;
++ ep->dwc_ep.xfer_len = ep->dwc_ep.xfer_count;
++ }
++ ep->stopped = 0;
++ DWC_DEBUGPL(DBG_PCD,"xfer_buff=%p xfer_count=%0x "
++ "xfer_len=%0x stopped=%d\n",
++ ep->dwc_ep.xfer_buff,
++ ep->dwc_ep.xfer_count, ep->dwc_ep.xfer_len ,
++ ep->stopped
++ );
++ if (epnum == 0) {
++ dwc_otg_ep0_start_transfer(core_if, &ep->dwc_ep);
++ }
++ else {
++ dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep);
++ }
++ }
++}
++
++
++/**
++ * handle the IN EP disable interrupt.
++ */
++static inline void handle_in_ep_disable_intr(dwc_otg_pcd_t *pcd,
++ const uint32_t epnum)
++{
++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++ deptsiz_data_t dieptsiz = {.d32=0};
++ dctl_data_t dctl = {.d32=0};
++ dwc_otg_pcd_ep_t *ep;
++ dwc_ep_t *dwc_ep;
++
++ ep = get_in_ep(pcd, epnum);
++ dwc_ep = &ep->dwc_ep;
++
++ if(dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
++ dwc_otg_flush_tx_fifo(core_if, dwc_ep->tx_fifo_num);
++ return;
++ }
++
++ DWC_DEBUGPL(DBG_PCD,"diepctl%d=%0x\n", epnum,
++ dwc_read_reg32(&dev_if->in_ep_regs[epnum]->diepctl));
++ dieptsiz.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dieptsiz);
++
++ DWC_DEBUGPL(DBG_ANY, "pktcnt=%d size=%d\n",
++ dieptsiz.b.pktcnt,
++ dieptsiz.b.xfersize);
++
++ if (ep->stopped) {
++ /* Flush the Tx FIFO */
++ dwc_otg_flush_tx_fifo(core_if, dwc_ep->tx_fifo_num);
++ /* Clear the Global IN NP NAK */
++ dctl.d32 = 0;
++ dctl.b.cgnpinnak = 1;
++ dwc_modify_reg32(&dev_if->dev_global_regs->dctl,
++ dctl.d32, 0);
++ /* Restart the transaction */
++ if (dieptsiz.b.pktcnt != 0 ||
++ dieptsiz.b.xfersize != 0) {
++ restart_transfer(pcd, epnum);
++ }
++ }
++ else {
++ /* Restart the transaction */
++ if (dieptsiz.b.pktcnt != 0 ||
++ dieptsiz.b.xfersize != 0) {
++ restart_transfer(pcd, epnum);
++ }
++ DWC_DEBUGPL(DBG_ANY, "STOPPED!!!\n");
++ }
++}
++
++/**
++ * Handler for the IN EP timeout handshake interrupt.
++ */
++static inline void handle_in_ep_timeout_intr(dwc_otg_pcd_t *pcd,
++ const uint32_t epnum)
++{
++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++
++#ifdef DEBUG
++ deptsiz_data_t dieptsiz = {.d32=0};
++ uint32_t num = 0;
++#endif
++ dctl_data_t dctl = {.d32=0};
++ dwc_otg_pcd_ep_t *ep;
++
++ gintmsk_data_t intr_mask = {.d32 = 0};
++
++ ep = get_in_ep(pcd, epnum);
++
++ /* Disable the NP Tx Fifo Empty Interrrupt */
++ if (!core_if->dma_enable) {
++ intr_mask.b.nptxfempty = 1;
++ dwc_modify_reg32(&core_if->core_global_regs->gintmsk, intr_mask.d32, 0);
++ }
++ /** @todo NGS Check EP type.
++ * Implement for Periodic EPs */
++ /*
++ * Non-periodic EP
++ */
++ /* Enable the Global IN NAK Effective Interrupt */
++ intr_mask.b.ginnakeff = 1;
++ dwc_modify_reg32(&core_if->core_global_regs->gintmsk,
++ 0, intr_mask.d32);
++
++ /* Set Global IN NAK */
++ dctl.b.sgnpinnak = 1;
++ dwc_modify_reg32(&dev_if->dev_global_regs->dctl,
++ dctl.d32, dctl.d32);
++
++ ep->stopped = 1;
++
++#ifdef DEBUG
++ dieptsiz.d32 = dwc_read_reg32(&dev_if->in_ep_regs[num]->dieptsiz);
++ DWC_DEBUGPL(DBG_ANY, "pktcnt=%d size=%d\n",
++ dieptsiz.b.pktcnt,
++ dieptsiz.b.xfersize);
++#endif
++
++#ifdef DISABLE_PERIODIC_EP
++ /*
++ * Set the NAK bit for this EP to
++ * start the disable process.
++ */
++ diepctl.d32 = 0;
++ diepctl.b.snak = 1;
++ dwc_modify_reg32(&dev_if->in_ep_regs[num]->diepctl, diepctl.d32, diepctl.d32);
++ ep->disabling = 1;
++ ep->stopped = 1;
++#endif
++}
++
++/**
++ * Handler for the IN EP NAK interrupt.
++ */
++static inline int32_t handle_in_ep_nak_intr(dwc_otg_pcd_t *pcd,
++ const uint32_t epnum)
++{
++ /** @todo implement ISR */
++ dwc_otg_core_if_t* core_if;
++ diepmsk_data_t intr_mask = { .d32 = 0};
++
++ DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "IN EP NAK");
++ core_if = GET_CORE_IF(pcd);
++ intr_mask.b.nak = 1;
++
++ if(core_if->multiproc_int_enable) {
++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->diepeachintmsk[epnum],
++ intr_mask.d32, 0);
++ } else {
++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->diepmsk,
++ intr_mask.d32, 0);
++ }
++
++ return 1;
++}
++
++/**
++ * Handler for the OUT EP Babble interrupt.
++ */
++static inline int32_t handle_out_ep_babble_intr(dwc_otg_pcd_t *pcd,
++ const uint32_t epnum)
++{
++ /** @todo implement ISR */
++ dwc_otg_core_if_t* core_if;
++ doepmsk_data_t intr_mask = { .d32 = 0};
++
++ DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "OUT EP Babble");
++ core_if = GET_CORE_IF(pcd);
++ intr_mask.b.babble = 1;
++
++ if(core_if->multiproc_int_enable) {
++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepeachintmsk[epnum],
++ intr_mask.d32, 0);
++ } else {
++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepmsk,
++ intr_mask.d32, 0);
++ }
++
++ return 1;
++}
++
++/**
++ * Handler for the OUT EP NAK interrupt.
++ */
++static inline int32_t handle_out_ep_nak_intr(dwc_otg_pcd_t *pcd,
++ const uint32_t epnum)
++{
++ /** @todo implement ISR */
++ dwc_otg_core_if_t* core_if;
++ doepmsk_data_t intr_mask = { .d32 = 0};
++
++ DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "OUT EP NAK");
++ core_if = GET_CORE_IF(pcd);
++ intr_mask.b.nak = 1;
++
++ if(core_if->multiproc_int_enable) {
++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepeachintmsk[epnum],
++ intr_mask.d32, 0);
++ } else {
++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepmsk,
++ intr_mask.d32, 0);
++ }
++
++ return 1;
++}
++
++/**
++ * Handler for the OUT EP NYET interrupt.
++ */
++static inline int32_t handle_out_ep_nyet_intr(dwc_otg_pcd_t *pcd,
++ const uint32_t epnum)
++{
++ /** @todo implement ISR */
++ dwc_otg_core_if_t* core_if;
++ doepmsk_data_t intr_mask = { .d32 = 0};
++
++ DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "OUT EP NYET");
++ core_if = GET_CORE_IF(pcd);
++ intr_mask.b.nyet = 1;
++
++ if(core_if->multiproc_int_enable) {
++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepeachintmsk[epnum],
++ intr_mask.d32, 0);
++ } else {
++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepmsk,
++ intr_mask.d32, 0);
++ }
++
++ return 1;
++}
++
++/**
++ * This interrupt indicates that an IN EP has a pending Interrupt.
++ * The sequence for handling the IN EP interrupt is shown below:
++ * -# Read the Device All Endpoint Interrupt register
++ * -# Repeat the following for each IN EP interrupt bit set (from
++ * LSB to MSB).
++ * -# Read the Device Endpoint Interrupt (DIEPINTn) register
++ * -# If "Transfer Complete" call the request complete function
++ * -# If "Endpoint Disabled" complete the EP disable procedure.
++ * -# If "AHB Error Interrupt" log error
++ * -# If "Time-out Handshake" log error
++ * -# If "IN Token Received when TxFIFO Empty" write packet to Tx
++ * FIFO.
++ * -# If "IN Token EP Mismatch" (disable, this is handled by EP
++ * Mismatch Interrupt)
++ */
++static int32_t dwc_otg_pcd_handle_in_ep_intr(dwc_otg_pcd_t *pcd)
++{
++#define CLEAR_IN_EP_INTR(__core_if,__epnum,__intr) \
++do { \
++ diepint_data_t diepint = {.d32=0}; \
++ diepint.b.__intr = 1; \
++ dwc_write_reg32(&__core_if->dev_if->in_ep_regs[__epnum]->diepint, \
++ diepint.d32); \
++} while (0)
++
++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++ diepint_data_t diepint = {.d32=0};
++ dctl_data_t dctl = {.d32=0};
++ depctl_data_t depctl = {.d32=0};
++ uint32_t ep_intr;
++ uint32_t epnum = 0;
++ dwc_otg_pcd_ep_t *ep;
++ dwc_ep_t *dwc_ep;
++ gintmsk_data_t intr_mask = {.d32 = 0};
++
++
++
++ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, pcd);
++
++ /* Read in the device interrupt bits */
++ ep_intr = dwc_otg_read_dev_all_in_ep_intr(core_if);
++
++ /* Service the Device IN interrupts for each endpoint */
++ while(ep_intr) {
++ if (ep_intr&0x1) {
++ uint32_t empty_msk;
++ /* Get EP pointer */
++ ep = get_in_ep(pcd, epnum);
++ dwc_ep = &ep->dwc_ep;
++
++ depctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->diepctl);
++ empty_msk = dwc_read_reg32(&dev_if->dev_global_regs->dtknqr4_fifoemptymsk);
++
++ DWC_DEBUGPL(DBG_PCDV,
++ "IN EP INTERRUPT - %d\nepmty_msk - %8x diepctl - %8x\n",
++ epnum,
++ empty_msk,
++ depctl.d32);
++
++ DWC_DEBUGPL(DBG_PCD,
++ "EP%d-%s: type=%d, mps=%d\n",
++ dwc_ep->num, (dwc_ep->is_in ?"IN":"OUT"),
++ dwc_ep->type, dwc_ep->maxpacket);
++
++ diepint.d32 = dwc_otg_read_dev_in_ep_intr(core_if, dwc_ep);
++
++ DWC_DEBUGPL(DBG_PCDV, "EP %d Interrupt Register - 0x%x\n", epnum, diepint.d32);
++ /* Transfer complete */
++ if (diepint.b.xfercompl) {
++ /* Disable the NP Tx FIFO Empty
++ * Interrrupt */
++ if(core_if->en_multiple_tx_fifo == 0) {
++ intr_mask.b.nptxfempty = 1;
++ dwc_modify_reg32(&core_if->core_global_regs->gintmsk, intr_mask.d32, 0);
++ }
++ else {
++ /* Disable the Tx FIFO Empty Interrupt for this EP */
++ uint32_t fifoemptymsk = 0x1 << dwc_ep->num;
++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
++ fifoemptymsk, 0);
++ }
++ /* Clear the bit in DIEPINTn for this interrupt */
++ CLEAR_IN_EP_INTR(core_if,epnum,xfercompl);
++
++ /* Complete the transfer */
++ if (epnum == 0) {
++ handle_ep0(pcd);
++ }
++#ifdef DWC_EN_ISOC
++ else if(dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
++ if(!ep->stopped)
++ complete_iso_ep(ep);
++ }
++#endif //DWC_EN_ISOC
++ else {
++
++ complete_ep(ep);
++ }
++ }
++ /* Endpoint disable */
++ if (diepint.b.epdisabled) {
++ DWC_DEBUGPL(DBG_ANY,"EP%d IN disabled\n", epnum);
++ handle_in_ep_disable_intr(pcd, epnum);
++
++ /* Clear the bit in DIEPINTn for this interrupt */
++ CLEAR_IN_EP_INTR(core_if,epnum,epdisabled);
++ }
++ /* AHB Error */
++ if (diepint.b.ahberr) {
++ DWC_DEBUGPL(DBG_ANY,"EP%d IN AHB Error\n", epnum);
++ /* Clear the bit in DIEPINTn for this interrupt */
++ CLEAR_IN_EP_INTR(core_if,epnum,ahberr);
++ }
++ /* TimeOUT Handshake (non-ISOC IN EPs) */
++ if (diepint.b.timeout) {
++ DWC_DEBUGPL(DBG_ANY,"EP%d IN Time-out\n", epnum);
++ handle_in_ep_timeout_intr(pcd, epnum);
++
++ CLEAR_IN_EP_INTR(core_if,epnum,timeout);
++ }
++ /** IN Token received with TxF Empty */
++ if (diepint.b.intktxfemp) {
++ DWC_DEBUGPL(DBG_ANY,"EP%d IN TKN TxFifo Empty\n",
++ epnum);
++ if (!ep->stopped && epnum != 0) {
++
++ diepmsk_data_t diepmsk = { .d32 = 0};
++ diepmsk.b.intktxfemp = 1;
++
++ if(core_if->multiproc_int_enable) {
++ dwc_modify_reg32(&dev_if->dev_global_regs->diepeachintmsk[epnum],
++ diepmsk.d32, 0);
++ } else {
++ dwc_modify_reg32(&dev_if->dev_global_regs->diepmsk, diepmsk.d32, 0);
++ }
++ start_next_request(ep);
++ }
++ else if(core_if->dma_desc_enable && epnum == 0 &&
++ pcd->ep0state == EP0_OUT_STATUS_PHASE) {
++ // EP0 IN set STALL
++ depctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->diepctl);
++
++ /* set the disable and stall bits */
++ if (depctl.b.epena) {
++ depctl.b.epdis = 1;
++ }
++ depctl.b.stall = 1;
++ dwc_write_reg32(&dev_if->in_ep_regs[epnum]->diepctl, depctl.d32);
++ }
++ CLEAR_IN_EP_INTR(core_if,epnum,intktxfemp);
++ }
++ /** IN Token Received with EP mismatch */
++ if (diepint.b.intknepmis) {
++ DWC_DEBUGPL(DBG_ANY,"EP%d IN TKN EP Mismatch\n", epnum);
++ CLEAR_IN_EP_INTR(core_if,epnum,intknepmis);
++ }
++ /** IN Endpoint NAK Effective */
++ if (diepint.b.inepnakeff) {
++ DWC_DEBUGPL(DBG_ANY,"EP%d IN EP NAK Effective\n", epnum);
++ /* Periodic EP */
++ if (ep->disabling) {
++ depctl.d32 = 0;
++ depctl.b.snak = 1;
++ depctl.b.epdis = 1;
++ dwc_modify_reg32(&dev_if->in_ep_regs[epnum]->diepctl, depctl.d32, depctl.d32);
++ }
++ CLEAR_IN_EP_INTR(core_if,epnum,inepnakeff);
++
++ }
++
++ /** IN EP Tx FIFO Empty Intr */
++ if (diepint.b.emptyintr) {
++ DWC_DEBUGPL(DBG_ANY,"EP%d Tx FIFO Empty Intr \n", epnum);
++ write_empty_tx_fifo(pcd, epnum);
++
++ CLEAR_IN_EP_INTR(core_if,epnum,emptyintr);
++
++ }
++
++ /** IN EP BNA Intr */
++ if (diepint.b.bna) {
++ CLEAR_IN_EP_INTR(core_if,epnum,bna);
++ if(core_if->dma_desc_enable) {
++#ifdef DWC_EN_ISOC
++ if(dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
++ /*
++ * This checking is performed to prevent first "false" BNA
++ * handling occuring right after reconnect
++ */
++ if(dwc_ep->next_frame != 0xffffffff)
++ dwc_otg_pcd_handle_iso_bna(ep);
++ }
++ else
++#endif //DWC_EN_ISOC
++ {
++ dctl.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dctl);
++
++ /* If Global Continue on BNA is disabled - disable EP */
++ if(!dctl.b.gcontbna) {
++ depctl.d32 = 0;
++ depctl.b.snak = 1;
++ depctl.b.epdis = 1;
++ dwc_modify_reg32(&dev_if->in_ep_regs[epnum]->diepctl, depctl.d32, depctl.d32);
++ } else {
++ start_next_request(ep);
++ }
++ }
++ }
++ }
++ /* NAK Interrutp */
++ if (diepint.b.nak) {
++ DWC_DEBUGPL(DBG_ANY,"EP%d IN NAK Interrupt\n", epnum);
++ handle_in_ep_nak_intr(pcd, epnum);
++
++ CLEAR_IN_EP_INTR(core_if,epnum,nak);
++ }
++ }
++ epnum++;
++ ep_intr >>=1;
++ }
++
++ return 1;
++#undef CLEAR_IN_EP_INTR
++}
++
++/**
++ * This interrupt indicates that an OUT EP has a pending Interrupt.
++ * The sequence for handling the OUT EP interrupt is shown below:
++ * -# Read the Device All Endpoint Interrupt register
++ * -# Repeat the following for each OUT EP interrupt bit set (from
++ * LSB to MSB).
++ * -# Read the Device Endpoint Interrupt (DOEPINTn) register
++ * -# If "Transfer Complete" call the request complete function
++ * -# If "Endpoint Disabled" complete the EP disable procedure.
++ * -# If "AHB Error Interrupt" log error
++ * -# If "Setup Phase Done" process Setup Packet (See Standard USB
++ * Command Processing)
++ */
++static int32_t dwc_otg_pcd_handle_out_ep_intr(dwc_otg_pcd_t *pcd)
++{
++#define CLEAR_OUT_EP_INTR(__core_if,__epnum,__intr) \
++do { \
++ doepint_data_t doepint = {.d32=0}; \
++ doepint.b.__intr = 1; \
++ dwc_write_reg32(&__core_if->dev_if->out_ep_regs[__epnum]->doepint, \
++ doepint.d32); \
++} while (0)
++
++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++ uint32_t ep_intr;
++ doepint_data_t doepint = {.d32=0};
++ dctl_data_t dctl = {.d32=0};
++ depctl_data_t doepctl = {.d32=0};
++ uint32_t epnum = 0;
++ dwc_otg_pcd_ep_t *ep;
++ dwc_ep_t *dwc_ep;
++
++ DWC_DEBUGPL(DBG_PCDV, "%s()\n", __func__);
++
++ /* Read in the device interrupt bits */
++ ep_intr = dwc_otg_read_dev_all_out_ep_intr(core_if);
++
++ while(ep_intr) {
++ if (ep_intr&0x1) {
++ /* Get EP pointer */
++ ep = get_out_ep(pcd, epnum);
++ dwc_ep = &ep->dwc_ep;
++
++#ifdef VERBOSE
++ DWC_DEBUGPL(DBG_PCDV,
++ "EP%d-%s: type=%d, mps=%d\n",
++ dwc_ep->num, (dwc_ep->is_in ?"IN":"OUT"),
++ dwc_ep->type, dwc_ep->maxpacket);
++#endif
++ doepint.d32 = dwc_otg_read_dev_out_ep_intr(core_if, dwc_ep);
++
++ /* Transfer complete */
++ if (doepint.b.xfercompl) {
++
++ if (epnum == 0) {
++ /* Clear the bit in DOEPINTn for this interrupt */
++ CLEAR_OUT_EP_INTR(core_if,epnum,xfercompl);
++ if(core_if->dma_desc_enable == 0 || pcd->ep0state != EP0_IDLE)
++ handle_ep0(pcd);
++#ifdef DWC_EN_ISOC
++ } else if(dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
++ if (doepint.b.pktdrpsts == 0) {
++ /* Clear the bit in DOEPINTn for this interrupt */
++ CLEAR_OUT_EP_INTR(core_if,epnum,xfercompl);
++ complete_iso_ep(ep);
++ } else {
++
++ doepint_data_t doepint = {.d32=0};
++ doepint.b.xfercompl = 1;
++ doepint.b.pktdrpsts = 1;
++ dwc_write_reg32(&core_if->dev_if->out_ep_regs[epnum]->doepint,
++ doepint.d32);
++ if(handle_iso_out_pkt_dropped(core_if,dwc_ep)) {
++ complete_iso_ep(ep);
++ }
++ }
++#endif //DWC_EN_ISOC
++ } else {
++ /* Clear the bit in DOEPINTn for this interrupt */
++ CLEAR_OUT_EP_INTR(core_if,epnum,xfercompl);
++ complete_ep(ep);
++ }
++
++ }
++
++ /* Endpoint disable */
++ if (doepint.b.epdisabled) {
++
++ /* Clear the bit in DOEPINTn for this interrupt */
++ CLEAR_OUT_EP_INTR(core_if,epnum,epdisabled);
++ }
++ /* AHB Error */
++ if (doepint.b.ahberr) {
++ DWC_DEBUGPL(DBG_PCD,"EP%d OUT AHB Error\n", epnum);
++ DWC_DEBUGPL(DBG_PCD,"EP DMA REG %d \n", core_if->dev_if->out_ep_regs[epnum]->doepdma);
++ CLEAR_OUT_EP_INTR(core_if,epnum,ahberr);
++ }
++ /* Setup Phase Done (contorl EPs) */
++ if (doepint.b.setup) {
++#ifdef DEBUG_EP0
++ DWC_DEBUGPL(DBG_PCD,"EP%d SETUP Done\n",
++ epnum);
++#endif
++ CLEAR_OUT_EP_INTR(core_if,epnum,setup);
++
++ handle_ep0(pcd);
++ }
++
++ /** OUT EP BNA Intr */
++ if (doepint.b.bna) {
++ CLEAR_OUT_EP_INTR(core_if,epnum,bna);
++ if(core_if->dma_desc_enable) {
++#ifdef DWC_EN_ISOC
++ if(dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
++ /*
++ * This checking is performed to prevent first "false" BNA
++ * handling occuring right after reconnect
++ */
++ if(dwc_ep->next_frame != 0xffffffff)
++ dwc_otg_pcd_handle_iso_bna(ep);
++ }
++ else
++#endif //DWC_EN_ISOC
++ {
++ dctl.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dctl);
++
++ /* If Global Continue on BNA is disabled - disable EP*/
++ if(!dctl.b.gcontbna) {
++ doepctl.d32 = 0;
++ doepctl.b.snak = 1;
++ doepctl.b.epdis = 1;
++ dwc_modify_reg32(&dev_if->out_ep_regs[epnum]->doepctl, doepctl.d32, doepctl.d32);
++ } else {
++ start_next_request(ep);
++ }
++ }
++ }
++ }
++ if (doepint.b.stsphsercvd) {
++ CLEAR_OUT_EP_INTR(core_if,epnum,stsphsercvd);
++ if(core_if->dma_desc_enable) {
++ do_setup_in_status_phase(pcd);
++ }
++ }
++ /* Babble Interrutp */
++ if (doepint.b.babble) {
++ DWC_DEBUGPL(DBG_ANY,"EP%d OUT Babble\n", epnum);
++ handle_out_ep_babble_intr(pcd, epnum);
++
++ CLEAR_OUT_EP_INTR(core_if,epnum,babble);
++ }
++ /* NAK Interrutp */
++ if (doepint.b.nak) {
++ DWC_DEBUGPL(DBG_ANY,"EP%d OUT NAK\n", epnum);
++ handle_out_ep_nak_intr(pcd, epnum);
++
++ CLEAR_OUT_EP_INTR(core_if,epnum,nak);
++ }
++ /* NYET Interrutp */
++ if (doepint.b.nyet) {
++ DWC_DEBUGPL(DBG_ANY,"EP%d OUT NYET\n", epnum);
++ handle_out_ep_nyet_intr(pcd, epnum);
++
++ CLEAR_OUT_EP_INTR(core_if,epnum,nyet);
++ }
++ }
++
++ epnum++;
++ ep_intr >>=1;
++ }
++
++ return 1;
++
++#undef CLEAR_OUT_EP_INTR
++}
++
++
++/**
++ * Incomplete ISO IN Transfer Interrupt.
++ * This interrupt indicates one of the following conditions occurred
++ * while transmitting an ISOC transaction.
++ * - Corrupted IN Token for ISOC EP.
++ * - Packet not complete in FIFO.
++ * The follow actions will be taken:
++ * -# Determine the EP
++ * -# Set incomplete flag in dwc_ep structure
++ * -# Disable EP; when "Endpoint Disabled" interrupt is received
++ * Flush FIFO
++ */
++int32_t dwc_otg_pcd_handle_incomplete_isoc_in_intr(dwc_otg_pcd_t *pcd)
++{
++ gintsts_data_t gintsts;
++
++
++#ifdef DWC_EN_ISOC
++ dwc_otg_dev_if_t *dev_if;
++ deptsiz_data_t deptsiz = { .d32 = 0};
++ depctl_data_t depctl = { .d32 = 0};
++ dsts_data_t dsts = { .d32 = 0};
++ dwc_ep_t *dwc_ep;
++ int i;
++
++ dev_if = GET_CORE_IF(pcd)->dev_if;
++
++ for(i = 1; i <= dev_if->num_in_eps; ++i) {
++ dwc_ep = &pcd->in_ep[i].dwc_ep;
++ if(dwc_ep->active &&
++ dwc_ep->type == USB_ENDPOINT_XFER_ISOC)
++ {
++ deptsiz.d32 = dwc_read_reg32(&dev_if->in_ep_regs[i]->dieptsiz);
++ depctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[i]->diepctl);
++
++ if(depctl.b.epdis && deptsiz.d32) {
++ set_current_pkt_info(GET_CORE_IF(pcd), dwc_ep);
++ if(dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) {
++ dwc_ep->cur_pkt = 0;
++ dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
++
++ if(dwc_ep->proc_buf_num) {
++ dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff1;
++ dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr1;
++ } else {
++ dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff0;
++ dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr0;
++ }
++
++ }
++
++ dsts.d32 = dwc_read_reg32(&GET_CORE_IF(pcd)->dev_if->dev_global_regs->dsts);
++ dwc_ep->next_frame = dsts.b.soffn;
++
++ dwc_otg_iso_ep_start_frm_transfer(GET_CORE_IF(pcd), dwc_ep);
++ }
++ }
++ }
++
++#else
++ gintmsk_data_t intr_mask = { .d32 = 0};
++ DWC_PRINT("INTERRUPT Handler not implemented for %s\n",
++ "IN ISOC Incomplete");
++
++ intr_mask.b.incomplisoin = 1;
++ dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
++ intr_mask.d32, 0);
++#endif //DWC_EN_ISOC
++
++ /* Clear interrupt */
++ gintsts.d32 = 0;
++ gintsts.b.incomplisoin = 1;
++ dwc_write_reg32 (&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++ gintsts.d32);
++
++ return 1;
++}
++
++/**
++ * Incomplete ISO OUT Transfer Interrupt.
++ *
++ * This interrupt indicates that the core has dropped an ISO OUT
++ * packet. The following conditions can be the cause:
++ * - FIFO Full, the entire packet would not fit in the FIFO.
++ * - CRC Error
++ * - Corrupted Token
++ * The follow actions will be taken:
++ * -# Determine the EP
++ * -# Set incomplete flag in dwc_ep structure
++ * -# Read any data from the FIFO
++ * -# Disable EP. when "Endpoint Disabled" interrupt is received
++ * re-enable EP.
++ */
++int32_t dwc_otg_pcd_handle_incomplete_isoc_out_intr(dwc_otg_pcd_t *pcd)
++{
++ /* @todo implement ISR */
++ gintsts_data_t gintsts;
++
++#ifdef DWC_EN_ISOC
++ dwc_otg_dev_if_t *dev_if;
++ deptsiz_data_t deptsiz = { .d32 = 0};
++ depctl_data_t depctl = { .d32 = 0};
++ dsts_data_t dsts = { .d32 = 0};
++ dwc_ep_t *dwc_ep;
++ int i;
++
++ dev_if = GET_CORE_IF(pcd)->dev_if;
++
++ for(i = 1; i <= dev_if->num_out_eps; ++i) {
++ dwc_ep = &pcd->in_ep[i].dwc_ep;
++ if(pcd->out_ep[i].dwc_ep.active &&
++ pcd->out_ep[i].dwc_ep.type == USB_ENDPOINT_XFER_ISOC)
++ {
++ deptsiz.d32 = dwc_read_reg32(&dev_if->out_ep_regs[i]->doeptsiz);
++ depctl.d32 = dwc_read_reg32(&dev_if->out_ep_regs[i]->doepctl);
++
++ if(depctl.b.epdis && deptsiz.d32) {
++ set_current_pkt_info(GET_CORE_IF(pcd), &pcd->out_ep[i].dwc_ep);
++ if(dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) {
++ dwc_ep->cur_pkt = 0;
++ dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
++
++ if(dwc_ep->proc_buf_num) {
++ dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff1;
++ dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr1;
++ } else {
++ dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff0;
++ dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr0;
++ }
++
++ }
++
++ dsts.d32 = dwc_read_reg32(&GET_CORE_IF(pcd)->dev_if->dev_global_regs->dsts);
++ dwc_ep->next_frame = dsts.b.soffn;
++
++ dwc_otg_iso_ep_start_frm_transfer(GET_CORE_IF(pcd), dwc_ep);
++ }
++ }
++ }
++#else
++ /** @todo implement ISR */
++ gintmsk_data_t intr_mask = { .d32 = 0};
++
++ DWC_PRINT("INTERRUPT Handler not implemented for %s\n",
++ "OUT ISOC Incomplete");
++
++ intr_mask.b.incomplisoout = 1;
++ dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
++ intr_mask.d32, 0);
++
++#endif // DWC_EN_ISOC
++
++ /* Clear interrupt */
++ gintsts.d32 = 0;
++ gintsts.b.incomplisoout = 1;
++ dwc_write_reg32 (&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++ gintsts.d32);
++
++ return 1;
++}
++
++/**
++ * This function handles the Global IN NAK Effective interrupt.
++ *
++ */
++int32_t dwc_otg_pcd_handle_in_nak_effective(dwc_otg_pcd_t *pcd)
++{
++ dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if;
++ depctl_data_t diepctl = { .d32 = 0};
++ depctl_data_t diepctl_rd = { .d32 = 0};
++ gintmsk_data_t intr_mask = { .d32 = 0};
++ gintsts_data_t gintsts;
++ int i;
++
++ DWC_DEBUGPL(DBG_PCD, "Global IN NAK Effective\n");
++
++ /* Disable all active IN EPs */
++ diepctl.b.epdis = 1;
++ diepctl.b.snak = 1;
++
++ for (i=0; i <= dev_if->num_in_eps; i++)
++ {
++ diepctl_rd.d32 = dwc_read_reg32(&dev_if->in_ep_regs[i]->diepctl);
++ if (diepctl_rd.b.epena) {
++ dwc_write_reg32(&dev_if->in_ep_regs[i]->diepctl,
++ diepctl.d32);
++ }
++ }
++ /* Disable the Global IN NAK Effective Interrupt */
++ intr_mask.b.ginnakeff = 1;
++ dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
++ intr_mask.d32, 0);
++
++ /* Clear interrupt */
++ gintsts.d32 = 0;
++ gintsts.b.ginnakeff = 1;
++ dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++ gintsts.d32);
++
++ return 1;
++}
++
++/**
++ * OUT NAK Effective.
++ *
++ */
++int32_t dwc_otg_pcd_handle_out_nak_effective(dwc_otg_pcd_t *pcd)
++{
++ gintmsk_data_t intr_mask = { .d32 = 0};
++ gintsts_data_t gintsts;
++
++ DWC_PRINT("INTERRUPT Handler not implemented for %s\n",
++ "Global IN NAK Effective\n");
++ /* Disable the Global IN NAK Effective Interrupt */
++ intr_mask.b.goutnakeff = 1;
++ dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
++ intr_mask.d32, 0);
++
++ /* Clear interrupt */
++ gintsts.d32 = 0;
++ gintsts.b.goutnakeff = 1;
++ dwc_write_reg32 (&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++ gintsts.d32);
++
++ return 1;
++}
++
++
++/**
++ * PCD interrupt handler.
++ *
++ * The PCD handles the device interrupts. Many conditions can cause a
++ * device interrupt. When an interrupt occurs, the device interrupt
++ * service routine determines the cause of the interrupt and
++ * dispatches handling to the appropriate function. These interrupt
++ * handling functions are described below.
++ *
++ * All interrupt registers are processed from LSB to MSB.
++ *
++ */
++int32_t dwc_otg_pcd_handle_intr(dwc_otg_pcd_t *pcd)
++{
++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++#ifdef VERBOSE
++ dwc_otg_core_global_regs_t *global_regs =
++ core_if->core_global_regs;
++#endif
++ gintsts_data_t gintr_status;
++ int32_t retval = 0;
++
++
++#ifdef VERBOSE
++ DWC_DEBUGPL(DBG_ANY, "%s() gintsts=%08x gintmsk=%08x\n",
++ __func__,
++ dwc_read_reg32(&global_regs->gintsts),
++ dwc_read_reg32(&global_regs->gintmsk));
++#endif
++
++ if (dwc_otg_is_device_mode(core_if)) {
++ SPIN_LOCK(&pcd->lock);
++#ifdef VERBOSE
++ DWC_DEBUGPL(DBG_PCDV, "%s() gintsts=%08x gintmsk=%08x\n",
++ __func__,
++ dwc_read_reg32(&global_regs->gintsts),
++ dwc_read_reg32(&global_regs->gintmsk));
++#endif
++
++ gintr_status.d32 = dwc_otg_read_core_intr(core_if);
++
++/*
++ if (!gintr_status.d32) {
++ SPIN_UNLOCK(&pcd->lock);
++ return 0;
++ }
++*/
++ DWC_DEBUGPL(DBG_PCDV, "%s: gintsts&gintmsk=%08x\n",
++ __func__, gintr_status.d32);
++
++ if (gintr_status.b.sofintr) {
++ retval |= dwc_otg_pcd_handle_sof_intr(pcd);
++ }
++ if (gintr_status.b.rxstsqlvl) {
++ retval |= dwc_otg_pcd_handle_rx_status_q_level_intr(pcd);
++ }
++ if (gintr_status.b.nptxfempty) {
++ retval |= dwc_otg_pcd_handle_np_tx_fifo_empty_intr(pcd);
++ }
++ if (gintr_status.b.ginnakeff) {
++ retval |= dwc_otg_pcd_handle_in_nak_effective(pcd);
++ }
++ if (gintr_status.b.goutnakeff) {
++ retval |= dwc_otg_pcd_handle_out_nak_effective(pcd);
++ }
++ if (gintr_status.b.i2cintr) {
++ retval |= dwc_otg_pcd_handle_i2c_intr(pcd);
++ }
++ if (gintr_status.b.erlysuspend) {
++ retval |= dwc_otg_pcd_handle_early_suspend_intr(pcd);
++ }
++ if (gintr_status.b.usbreset) {
++ retval |= dwc_otg_pcd_handle_usb_reset_intr(pcd);
++ }
++ if (gintr_status.b.enumdone) {
++ retval |= dwc_otg_pcd_handle_enum_done_intr(pcd);
++ }
++ if (gintr_status.b.isooutdrop) {
++ retval |= dwc_otg_pcd_handle_isoc_out_packet_dropped_intr(pcd);
++ }
++ if (gintr_status.b.eopframe) {
++ retval |= dwc_otg_pcd_handle_end_periodic_frame_intr(pcd);
++ }
++ if (gintr_status.b.epmismatch) {
++ retval |= dwc_otg_pcd_handle_ep_mismatch_intr(core_if);
++ }
++ if (gintr_status.b.inepint) {
++ if(!core_if->multiproc_int_enable) {
++ retval |= dwc_otg_pcd_handle_in_ep_intr(pcd);
++ }
++ }
++ if (gintr_status.b.outepintr) {
++ if(!core_if->multiproc_int_enable) {
++ retval |= dwc_otg_pcd_handle_out_ep_intr(pcd);
++ }
++ }
++ if (gintr_status.b.incomplisoin) {
++ retval |= dwc_otg_pcd_handle_incomplete_isoc_in_intr(pcd);
++ }
++ if (gintr_status.b.incomplisoout) {
++ retval |= dwc_otg_pcd_handle_incomplete_isoc_out_intr(pcd);
++ }
++
++ /* In MPI mode De vice Endpoints intterrupts are asserted
++ * without setting outepintr and inepint bits set, so these
++ * Interrupt handlers are called without checking these bit-fields
++ */
++ if(core_if->multiproc_int_enable) {
++ retval |= dwc_otg_pcd_handle_in_ep_intr(pcd);
++ retval |= dwc_otg_pcd_handle_out_ep_intr(pcd);
++ }
++#ifdef VERBOSE
++ DWC_DEBUGPL(DBG_PCDV, "%s() gintsts=%0x\n", __func__,
++ dwc_read_reg32(&global_regs->gintsts));
++#endif
++ SPIN_UNLOCK(&pcd->lock);
++ }
++
++ S3C2410X_CLEAR_EINTPEND();
++
++ return retval;
++}
++
++#endif /* DWC_HOST_ONLY */
+diff --git a/drivers/usb/dwc_otg/dwc_otg_regs.h b/drivers/usb/dwc_otg/dwc_otg_regs.h
+new file mode 100644
+index 0000000..8265766
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_regs.h
+@@ -0,0 +1,2075 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_regs.h $
++ * $Revision: 1.2 $
++ * $Date: 2008-11-21 05:39:15 $
++ * $Change: 1099526 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#ifndef __DWC_OTG_REGS_H__
++#define __DWC_OTG_REGS_H__
++
++/**
++ * @file
++ *
++ * This file contains the data structures for accessing the DWC_otg core registers.
++ *
++ * The application interfaces with the HS OTG core by reading from and
++ * writing to the Control and Status Register (CSR) space through the
++ * AHB Slave interface. These registers are 32 bits wide, and the
++ * addresses are 32-bit-block aligned.
++ * CSRs are classified as follows:
++ * - Core Global Registers
++ * - Device Mode Registers
++ * - Device Global Registers
++ * - Device Endpoint Specific Registers
++ * - Host Mode Registers
++ * - Host Global Registers
++ * - Host Port CSRs
++ * - Host Channel Specific Registers
++ *
++ * Only the Core Global registers can be accessed in both Device and
++ * Host modes. When the HS OTG core is operating in one mode, either
++ * Device or Host, the application must not access registers from the
++ * other mode. When the core switches from one mode to another, the
++ * registers in the new mode of operation must be reprogrammed as they
++ * would be after a power-on reset.
++ */
++
++/** Maximum number of Periodic FIFOs */
++#define MAX_PERIO_FIFOS 15
++/** Maximum number of Transmit FIFOs */
++#define MAX_TX_FIFOS 15
++
++/** Maximum number of Endpoints/HostChannels */
++#define MAX_EPS_CHANNELS 16
++
++/****************************************************************************/
++/** DWC_otg Core registers .
++ * The dwc_otg_core_global_regs structure defines the size
++ * and relative field offsets for the Core Global registers.
++ */
++typedef struct dwc_otg_core_global_regs
++{
++ /** OTG Control and Status Register. <i>Offset: 000h</i> */
++ volatile uint32_t gotgctl;
++ /** OTG Interrupt Register. <i>Offset: 004h</i> */
++ volatile uint32_t gotgint;
++ /**Core AHB Configuration Register. <i>Offset: 008h</i> */
++ volatile uint32_t gahbcfg;
++
++#define DWC_GLBINTRMASK 0x0001
++#define DWC_DMAENABLE 0x0020
++#define DWC_NPTXEMPTYLVL_EMPTY 0x0080
++#define DWC_NPTXEMPTYLVL_HALFEMPTY 0x0000
++#define DWC_PTXEMPTYLVL_EMPTY 0x0100
++#define DWC_PTXEMPTYLVL_HALFEMPTY 0x0000
++
++ /**Core USB Configuration Register. <i>Offset: 00Ch</i> */
++ volatile uint32_t gusbcfg;
++ /**Core Reset Register. <i>Offset: 010h</i> */
++ volatile uint32_t grstctl;
++ /**Core Interrupt Register. <i>Offset: 014h</i> */
++ volatile uint32_t gintsts;
++ /**Core Interrupt Mask Register. <i>Offset: 018h</i> */
++ volatile uint32_t gintmsk;
++ /**Receive Status Queue Read Register (Read Only). <i>Offset: 01Ch</i> */
++ volatile uint32_t grxstsr;
++ /**Receive Status Queue Read & POP Register (Read Only). <i>Offset: 020h</i>*/
++ volatile uint32_t grxstsp;
++ /**Receive FIFO Size Register. <i>Offset: 024h</i> */
++ volatile uint32_t grxfsiz;
++ /**Non Periodic Transmit FIFO Size Register. <i>Offset: 028h</i> */
++ volatile uint32_t gnptxfsiz;
++ /**Non Periodic Transmit FIFO/Queue Status Register (Read
++ * Only). <i>Offset: 02Ch</i> */
++ volatile uint32_t gnptxsts;
++ /**I2C Access Register. <i>Offset: 030h</i> */
++ volatile uint32_t gi2cctl;
++ /**PHY Vendor Control Register. <i>Offset: 034h</i> */
++ volatile uint32_t gpvndctl;
++ /**General Purpose Input/Output Register. <i>Offset: 038h</i> */
++ volatile uint32_t ggpio;
++ /**User ID Register. <i>Offset: 03Ch</i> */
++ volatile uint32_t guid;
++ /**Synopsys ID Register (Read Only). <i>Offset: 040h</i> */
++ volatile uint32_t gsnpsid;
++ /**User HW Config1 Register (Read Only). <i>Offset: 044h</i> */
++ volatile uint32_t ghwcfg1;
++ /**User HW Config2 Register (Read Only). <i>Offset: 048h</i> */
++ volatile uint32_t ghwcfg2;
++#define DWC_SLAVE_ONLY_ARCH 0
++#define DWC_EXT_DMA_ARCH 1
++#define DWC_INT_DMA_ARCH 2
++
++#define DWC_MODE_HNP_SRP_CAPABLE 0
++#define DWC_MODE_SRP_ONLY_CAPABLE 1
++#define DWC_MODE_NO_HNP_SRP_CAPABLE 2
++#define DWC_MODE_SRP_CAPABLE_DEVICE 3
++#define DWC_MODE_NO_SRP_CAPABLE_DEVICE 4
++#define DWC_MODE_SRP_CAPABLE_HOST 5
++#define DWC_MODE_NO_SRP_CAPABLE_HOST 6
++
++ /**User HW Config3 Register (Read Only). <i>Offset: 04Ch</i> */
++ volatile uint32_t ghwcfg3;
++ /**User HW Config4 Register (Read Only). <i>Offset: 050h</i>*/
++ volatile uint32_t ghwcfg4;
++ /** Reserved <i>Offset: 054h-0FFh</i> */
++ volatile uint32_t reserved[43];
++ /** Host Periodic Transmit FIFO Size Register. <i>Offset: 100h</i> */
++ volatile uint32_t hptxfsiz;
++ /** Device Periodic Transmit FIFO#n Register if dedicated fifos are disabled,
++ otherwise Device Transmit FIFO#n Register.
++ * <i>Offset: 104h + (FIFO_Number-1)*04h, 1 <= FIFO Number <= 15 (1<=n<=15).</i> */
++ volatile uint32_t dptxfsiz_dieptxf[15];
++} dwc_otg_core_global_regs_t;
++
++/**
++ * This union represents the bit fields of the Core OTG Control
++ * and Status Register (GOTGCTL). Set the bits using the bit
++ * fields then write the <i>d32</i> value to the register.
++ */
++typedef union gotgctl_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct
++ {
++ unsigned sesreqscs : 1;
++ unsigned sesreq : 1;
++ unsigned reserved2_7 : 6;
++ unsigned hstnegscs : 1;
++ unsigned hnpreq : 1;
++ unsigned hstsethnpen : 1;
++ unsigned devhnpen : 1;
++ unsigned reserved12_15 : 4;
++ unsigned conidsts : 1;
++ unsigned reserved17 : 1;
++ unsigned asesvld : 1;
++ unsigned bsesvld : 1;
++ unsigned currmod : 1;
++ unsigned reserved21_31 : 11;
++ } b;
++} gotgctl_data_t;
++
++/**
++ * This union represents the bit fields of the Core OTG Interrupt Register
++ * (GOTGINT). Set/clear the bits using the bit fields then write the <i>d32</i>
++ * value to the register.
++ */
++typedef union gotgint_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct
++ {
++ /** Current Mode */
++ unsigned reserved0_1 : 2;
++
++ /** Session End Detected */
++ unsigned sesenddet : 1;
++
++ unsigned reserved3_7 : 5;
++
++ /** Session Request Success Status Change */
++ unsigned sesreqsucstschng : 1;
++ /** Host Negotiation Success Status Change */
++ unsigned hstnegsucstschng : 1;
++
++ unsigned reserver10_16 : 7;
++
++ /** Host Negotiation Detected */
++ unsigned hstnegdet : 1;
++ /** A-Device Timeout Change */
++ unsigned adevtoutchng : 1;
++ /** Debounce Done */
++ unsigned debdone : 1;
++
++ unsigned reserved31_20 : 12;
++
++ } b;
++} gotgint_data_t;
++
++
++/**
++ * This union represents the bit fields of the Core AHB Configuration
++ * Register (GAHBCFG). Set/clear the bits using the bit fields then
++ * write the <i>d32</i> value to the register.
++ */
++typedef union gahbcfg_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct
++ {
++ unsigned glblintrmsk : 1;
++#define DWC_GAHBCFG_GLBINT_ENABLE 1
++
++ unsigned hburstlen : 4;
++#define DWC_GAHBCFG_INT_DMA_BURST_SINGLE 0
++#define DWC_GAHBCFG_INT_DMA_BURST_INCR 1
++#define DWC_GAHBCFG_INT_DMA_BURST_INCR4 3
++#define DWC_GAHBCFG_INT_DMA_BURST_INCR8 5
++#define DWC_GAHBCFG_INT_DMA_BURST_INCR16 7
++
++ unsigned dmaenable : 1;
++#define DWC_GAHBCFG_DMAENABLE 1
++ unsigned reserved : 1;
++ unsigned nptxfemplvl_txfemplvl : 1;
++ unsigned ptxfemplvl : 1;
++#define DWC_GAHBCFG_TXFEMPTYLVL_EMPTY 1
++#define DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY 0
++ unsigned reserved9_31 : 23;
++ } b;
++} gahbcfg_data_t;
++
++/**
++ * This union represents the bit fields of the Core USB Configuration
++ * Register (GUSBCFG). Set the bits using the bit fields then write
++ * the <i>d32</i> value to the register.
++ */
++typedef union gusbcfg_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct
++ {
++ unsigned toutcal : 3;
++ unsigned phyif : 1;
++ unsigned ulpi_utmi_sel : 1;
++ unsigned fsintf : 1;
++ unsigned physel : 1;
++ unsigned ddrsel : 1;
++ unsigned srpcap : 1;
++ unsigned hnpcap : 1;
++ unsigned usbtrdtim : 4;
++ unsigned nptxfrwnden : 1;
++ unsigned phylpwrclksel : 1;
++ unsigned otgutmifssel : 1;
++ unsigned ulpi_fsls : 1;
++ unsigned ulpi_auto_res : 1;
++ unsigned ulpi_clk_sus_m : 1;
++ unsigned ulpi_ext_vbus_drv : 1;
++ unsigned ulpi_int_vbus_indicator : 1;
++ unsigned term_sel_dl_pulse : 1;
++ unsigned reserved23_27 : 5;
++ unsigned tx_end_delay : 1;
++ unsigned reserved29_31 : 3;
++ } b;
++} gusbcfg_data_t;
++
++/**
++ * This union represents the bit fields of the Core Reset Register
++ * (GRSTCTL). Set/clear the bits using the bit fields then write the
++ * <i>d32</i> value to the register.
++ */
++typedef union grstctl_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct
++ {
++ /** Core Soft Reset (CSftRst) (Device and Host)
++ *
++ * The application can flush the control logic in the
++ * entire core using this bit. This bit resets the
++ * pipelines in the AHB Clock domain as well as the
++ * PHY Clock domain.
++ *
++ * The state machines are reset to an IDLE state, the
++ * control bits in the CSRs are cleared, all the
++ * transmit FIFOs and the receive FIFO are flushed.
++ *
++ * The status mask bits that control the generation of
++ * the interrupt, are cleared, to clear the
++ * interrupt. The interrupt status bits are not
++ * cleared, so the application can get the status of
++ * any events that occurred in the core after it has
++ * set this bit.
++ *
++ * Any transactions on the AHB are terminated as soon
++ * as possible following the protocol. Any
++ * transactions on the USB are terminated immediately.
++ *
++ * The configuration settings in the CSRs are
++ * unchanged, so the software doesn't have to
++ * reprogram these registers (Device
++ * Configuration/Host Configuration/Core System
++ * Configuration/Core PHY Configuration).
++ *
++ * The application can write to this bit, any time it
++ * wants to reset the core. This is a self clearing
++ * bit and the core clears this bit after all the
++ * necessary logic is reset in the core, which may
++ * take several clocks, depending on the current state
++ * of the core.
++ */
++ unsigned csftrst : 1;
++ /** Hclk Soft Reset
++ *
++ * The application uses this bit to reset the control logic in
++ * the AHB clock domain. Only AHB clock domain pipelines are
++ * reset.
++ */
++ unsigned hsftrst : 1;
++ /** Host Frame Counter Reset (Host Only)<br>
++ *
++ * The application can reset the (micro)frame number
++ * counter inside the core, using this bit. When the
++ * (micro)frame counter is reset, the subsequent SOF
++ * sent out by the core, will have a (micro)frame
++ * number of 0.
++ */
++ unsigned hstfrm : 1;
++ /** In Token Sequence Learning Queue Flush
++ * (INTknQFlsh) (Device Only)
++ */
++ unsigned intknqflsh : 1;
++ /** RxFIFO Flush (RxFFlsh) (Device and Host)
++ *
++ * The application can flush the entire Receive FIFO
++ * using this bit. <p>The application must first
++ * ensure that the core is not in the middle of a
++ * transaction. <p>The application should write into
++ * this bit, only after making sure that neither the
++ * DMA engine is reading from the RxFIFO nor the MAC
++ * is writing the data in to the FIFO. <p>The
++ * application should wait until the bit is cleared
++ * before performing any other operations. This bit
++ * will takes 8 clocks (slowest of PHY or AHB clock)
++ * to clear.
++ */
++ unsigned rxfflsh : 1;
++ /** TxFIFO Flush (TxFFlsh) (Device and Host).
++ *
++ * This bit is used to selectively flush a single or
++ * all transmit FIFOs. The application must first
++ * ensure that the core is not in the middle of a
++ * transaction. <p>The application should write into
++ * this bit, only after making sure that neither the
++ * DMA engine is writing into the TxFIFO nor the MAC
++ * is reading the data out of the FIFO. <p>The
++ * application should wait until the core clears this
++ * bit, before performing any operations. This bit
++ * will takes 8 clocks (slowest of PHY or AHB clock)
++ * to clear.
++ */
++ unsigned txfflsh : 1;
++
++ /** TxFIFO Number (TxFNum) (Device and Host).
++ *
++ * This is the FIFO number which needs to be flushed,
++ * using the TxFIFO Flush bit. This field should not
++ * be changed until the TxFIFO Flush bit is cleared by
++ * the core.
++ * - 0x0 : Non Periodic TxFIFO Flush
++ * - 0x1 : Periodic TxFIFO #1 Flush in device mode
++ * or Periodic TxFIFO in host mode
++ * - 0x2 : Periodic TxFIFO #2 Flush in device mode.
++ * - ...
++ * - 0xF : Periodic TxFIFO #15 Flush in device mode
++ * - 0x10: Flush all the Transmit NonPeriodic and
++ * Transmit Periodic FIFOs in the core
++ */
++ unsigned txfnum : 5;
++ /** Reserved */
++ unsigned reserved11_29 : 19;
++ /** DMA Request Signal. Indicated DMA request is in
++ * probress. Used for debug purpose. */
++ unsigned dmareq : 1;
++ /** AHB Master Idle. Indicates the AHB Master State
++ * Machine is in IDLE condition. */
++ unsigned ahbidle : 1;
++ } b;
++} grstctl_t;
++
++
++/**
++ * This union represents the bit fields of the Core Interrupt Mask
++ * Register (GINTMSK). Set/clear the bits using the bit fields then
++ * write the <i>d32</i> value to the register.
++ */
++typedef union gintmsk_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct
++ {
++ unsigned reserved0 : 1;
++ unsigned modemismatch : 1;
++ unsigned otgintr : 1;
++ unsigned sofintr : 1;
++ unsigned rxstsqlvl : 1;
++ unsigned nptxfempty : 1;
++ unsigned ginnakeff : 1;
++ unsigned goutnakeff : 1;
++ unsigned reserved8 : 1;
++ unsigned i2cintr : 1;
++ unsigned erlysuspend : 1;
++ unsigned usbsuspend : 1;
++ unsigned usbreset : 1;
++ unsigned enumdone : 1;
++ unsigned isooutdrop : 1;
++ unsigned eopframe : 1;
++ unsigned reserved16 : 1;
++ unsigned epmismatch : 1;
++ unsigned inepintr : 1;
++ unsigned outepintr : 1;
++ unsigned incomplisoin : 1;
++ unsigned incomplisoout : 1;
++ unsigned reserved22_23 : 2;
++ unsigned portintr : 1;
++ unsigned hcintr : 1;
++ unsigned ptxfempty : 1;
++ unsigned reserved27 : 1;
++ unsigned conidstschng : 1;
++ unsigned disconnect : 1;
++ unsigned sessreqintr : 1;
++ unsigned wkupintr : 1;
++ } b;
++} gintmsk_data_t;
++/**
++ * This union represents the bit fields of the Core Interrupt Register
++ * (GINTSTS). Set/clear the bits using the bit fields then write the
++ * <i>d32</i> value to the register.
++ */
++typedef union gintsts_data
++{
++ /** raw register data */
++ uint32_t d32;
++#define DWC_SOF_INTR_MASK 0x0008
++ /** register bits */
++ struct
++ {
++#define DWC_HOST_MODE 1
++ unsigned curmode : 1;
++ unsigned modemismatch : 1;
++ unsigned otgintr : 1;
++ unsigned sofintr : 1;
++ unsigned rxstsqlvl : 1;
++ unsigned nptxfempty : 1;
++ unsigned ginnakeff : 1;
++ unsigned goutnakeff : 1;
++ unsigned reserved8 : 1;
++ unsigned i2cintr : 1;
++ unsigned erlysuspend : 1;
++ unsigned usbsuspend : 1;
++ unsigned usbreset : 1;
++ unsigned enumdone : 1;
++ unsigned isooutdrop : 1;
++ unsigned eopframe : 1;
++ unsigned intokenrx : 1;
++ unsigned epmismatch : 1;
++ unsigned inepint: 1;
++ unsigned outepintr : 1;
++ unsigned incomplisoin : 1;
++ unsigned incomplisoout : 1;
++ unsigned reserved22_23 : 2;
++ unsigned portintr : 1;
++ unsigned hcintr : 1;
++ unsigned ptxfempty : 1;
++ unsigned reserved27 : 1;
++ unsigned conidstschng : 1;
++ unsigned disconnect : 1;
++ unsigned sessreqintr : 1;
++ unsigned wkupintr : 1;
++ } b;
++} gintsts_data_t;
++
++
++/**
++ * This union represents the bit fields in the Device Receive Status Read and
++ * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the <i>d32</i>
++ * element then read out the bits using the <i>b</i>it elements.
++ */
++typedef union device_grxsts_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct
++ {
++ unsigned epnum : 4;
++ unsigned bcnt : 11;
++ unsigned dpid : 2;
++
++#define DWC_STS_DATA_UPDT 0x2 // OUT Data Packet
++#define DWC_STS_XFER_COMP 0x3 // OUT Data Transfer Complete
++
++#define DWC_DSTS_GOUT_NAK 0x1 // Global OUT NAK
++#define DWC_DSTS_SETUP_COMP 0x4 // Setup Phase Complete
++#define DWC_DSTS_SETUP_UPDT 0x6 // SETUP Packet
++ unsigned pktsts : 4;
++ unsigned fn : 4;
++ unsigned reserved : 7;
++ } b;
++} device_grxsts_data_t;
++
++/**
++ * This union represents the bit fields in the Host Receive Status Read and
++ * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the <i>d32</i>
++ * element then read out the bits using the <i>b</i>it elements.
++ */
++typedef union host_grxsts_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct
++ {
++ unsigned chnum : 4;
++ unsigned bcnt : 11;
++ unsigned dpid : 2;
++
++ unsigned pktsts : 4;
++#define DWC_GRXSTS_PKTSTS_IN 0x2
++#define DWC_GRXSTS_PKTSTS_IN_XFER_COMP 0x3
++#define DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR 0x5
++#define DWC_GRXSTS_PKTSTS_CH_HALTED 0x7
++
++ unsigned reserved : 11;
++ } b;
++} host_grxsts_data_t;
++
++/**
++ * This union represents the bit fields in the FIFO Size Registers (HPTXFSIZ,
++ * GNPTXFSIZ, DPTXFSIZn, DIEPTXFn). Read the register into the <i>d32</i> element then
++ * read out the bits using the <i>b</i>it elements.
++ */
++typedef union fifosize_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct
++ {
++ unsigned startaddr : 16;
++ unsigned depth : 16;
++ } b;
++} fifosize_data_t;
++
++/**
++ * This union represents the bit fields in the Non-Periodic Transmit
++ * FIFO/Queue Status Register (GNPTXSTS). Read the register into the
++ * <i>d32</i> element then read out the bits using the <i>b</i>it
++ * elements.
++ */
++typedef union gnptxsts_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct
++ {
++ unsigned nptxfspcavail : 16;
++ unsigned nptxqspcavail : 8;
++ /** Top of the Non-Periodic Transmit Request Queue
++ * - bit 24 - Terminate (Last entry for the selected
++ * channel/EP)
++ * - bits 26:25 - Token Type
++ * - 2'b00 - IN/OUT
++ * - 2'b01 - Zero Length OUT
++ * - 2'b10 - PING/Complete Split
++ * - 2'b11 - Channel Halt
++ * - bits 30:27 - Channel/EP Number
++ */
++ unsigned nptxqtop_terminate : 1;
++ unsigned nptxqtop_token : 2;
++ unsigned nptxqtop_chnep : 4;
++ unsigned reserved : 1;
++ } b;
++} gnptxsts_data_t;
++
++/**
++ * This union represents the bit fields in the Transmit
++ * FIFO Status Register (DTXFSTS). Read the register into the
++ * <i>d32</i> element then read out the bits using the <i>b</i>it
++ * elements.
++ */
++typedef union dtxfsts_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct
++ {
++ unsigned txfspcavail : 16;
++ unsigned reserved : 16;
++ } b;
++} dtxfsts_data_t;
++
++/**
++ * This union represents the bit fields in the I2C Control Register
++ * (I2CCTL). Read the register into the <i>d32</i> element then read out the
++ * bits using the <i>b</i>it elements.
++ */
++typedef union gi2cctl_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct
++ {
++ unsigned rwdata : 8;
++ unsigned regaddr : 8;
++ unsigned addr : 7;
++ unsigned i2cen : 1;
++ unsigned ack : 1;
++ unsigned i2csuspctl : 1;
++ unsigned i2cdevaddr : 2;
++ unsigned reserved : 2;
++ unsigned rw : 1;
++ unsigned bsydne : 1;
++ } b;
++} gi2cctl_data_t;
++
++/**
++ * This union represents the bit fields in the User HW Config1
++ * Register. Read the register into the <i>d32</i> element then read
++ * out the bits using the <i>b</i>it elements.
++ */
++typedef union hwcfg1_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct
++ {
++ unsigned ep_dir0 : 2;
++ unsigned ep_dir1 : 2;
++ unsigned ep_dir2 : 2;
++ unsigned ep_dir3 : 2;
++ unsigned ep_dir4 : 2;
++ unsigned ep_dir5 : 2;
++ unsigned ep_dir6 : 2;
++ unsigned ep_dir7 : 2;
++ unsigned ep_dir8 : 2;
++ unsigned ep_dir9 : 2;
++ unsigned ep_dir10 : 2;
++ unsigned ep_dir11 : 2;
++ unsigned ep_dir12 : 2;
++ unsigned ep_dir13 : 2;
++ unsigned ep_dir14 : 2;
++ unsigned ep_dir15 : 2;
++ } b;
++} hwcfg1_data_t;
++
++/**
++ * This union represents the bit fields in the User HW Config2
++ * Register. Read the register into the <i>d32</i> element then read
++ * out the bits using the <i>b</i>it elements.
++ */
++typedef union hwcfg2_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct
++ {
++ /* GHWCFG2 */
++ unsigned op_mode : 3;
++#define DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG 0
++#define DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG 1
++#define DWC_HWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE_OTG 2
++#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE 3
++#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE 4
++#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST 5
++#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST 6
++
++ unsigned architecture : 2;
++ unsigned point2point : 1;
++ unsigned hs_phy_type : 2;
++#define DWC_HWCFG2_HS_PHY_TYPE_NOT_SUPPORTED 0
++#define DWC_HWCFG2_HS_PHY_TYPE_UTMI 1
++#define DWC_HWCFG2_HS_PHY_TYPE_ULPI 2
++#define DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI 3
++
++ unsigned fs_phy_type : 2;
++ unsigned num_dev_ep : 4;
++ unsigned num_host_chan : 4;
++ unsigned perio_ep_supported : 1;
++ unsigned dynamic_fifo : 1;
++ unsigned multi_proc_int : 1;
++ unsigned reserved21 : 1;
++ unsigned nonperio_tx_q_depth : 2;
++ unsigned host_perio_tx_q_depth : 2;
++ unsigned dev_token_q_depth : 5;
++ unsigned reserved31 : 1;
++ } b;
++} hwcfg2_data_t;
++
++/**
++ * This union represents the bit fields in the User HW Config3
++ * Register. Read the register into the <i>d32</i> element then read
++ * out the bits using the <i>b</i>it elements.
++ */
++typedef union hwcfg3_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct
++ {
++ /* GHWCFG3 */
++ unsigned xfer_size_cntr_width : 4;
++ unsigned packet_size_cntr_width : 3;
++ unsigned otg_func : 1;
++ unsigned i2c : 1;
++ unsigned vendor_ctrl_if : 1;
++ unsigned optional_features : 1;
++ unsigned synch_reset_type : 1;
++ unsigned ahb_phy_clock_synch : 1;
++ unsigned reserved15_13 : 3;
++ unsigned dfifo_depth : 16;
++ } b;
++} hwcfg3_data_t;
++
++/**
++ * This union represents the bit fields in the User HW Config4
++ * Register. Read the register into the <i>d32</i> element then read
++ * out the bits using the <i>b</i>it elements.
++ */
++typedef union hwcfg4_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct
++ {
++ unsigned num_dev_perio_in_ep : 4;
++ unsigned power_optimiz : 1;
++ unsigned min_ahb_freq : 9;
++ unsigned utmi_phy_data_width : 2;
++ unsigned num_dev_mode_ctrl_ep : 4;
++ unsigned iddig_filt_en : 1;
++ unsigned vbus_valid_filt_en : 1;
++ unsigned a_valid_filt_en : 1;
++ unsigned b_valid_filt_en : 1;
++ unsigned session_end_filt_en : 1;
++ unsigned ded_fifo_en : 1;
++ unsigned num_in_eps : 4;
++ unsigned desc_dma : 1;
++ unsigned desc_dma_dyn : 1;
++ } b;
++} hwcfg4_data_t;
++
++////////////////////////////////////////////
++// Device Registers
++/**
++ * Device Global Registers. <i>Offsets 800h-BFFh</i>
++ *
++ * The following structures define the size and relative field offsets
++ * for the Device Mode Registers.
++ *
++ * <i>These registers are visible only in Device mode and must not be
++ * accessed in Host mode, as the results are unknown.</i>
++ */
++typedef struct dwc_otg_dev_global_regs
++{
++ /** Device Configuration Register. <i>Offset 800h</i> */
++ volatile uint32_t dcfg;
++ /** Device Control Register. <i>Offset: 804h</i> */
++ volatile uint32_t dctl;
++ /** Device Status Register (Read Only). <i>Offset: 808h</i> */
++ volatile uint32_t dsts;
++ /** Reserved. <i>Offset: 80Ch</i> */
++ uint32_t unused;
++ /** Device IN Endpoint Common Interrupt Mask
++ * Register. <i>Offset: 810h</i> */
++ volatile uint32_t diepmsk;
++ /** Device OUT Endpoint Common Interrupt Mask
++ * Register. <i>Offset: 814h</i> */
++ volatile uint32_t doepmsk;
++ /** Device All Endpoints Interrupt Register. <i>Offset: 818h</i> */
++ volatile uint32_t daint;
++ /** Device All Endpoints Interrupt Mask Register. <i>Offset:
++ * 81Ch</i> */
++ volatile uint32_t daintmsk;
++ /** Device IN Token Queue Read Register-1 (Read Only).
++ * <i>Offset: 820h</i> */
++ volatile uint32_t dtknqr1;
++ /** Device IN Token Queue Read Register-2 (Read Only).
++ * <i>Offset: 824h</i> */
++ volatile uint32_t dtknqr2;
++ /** Device VBUS discharge Register. <i>Offset: 828h</i> */
++ volatile uint32_t dvbusdis;
++ /** Device VBUS Pulse Register. <i>Offset: 82Ch</i> */
++ volatile uint32_t dvbuspulse;
++ /** Device IN Token Queue Read Register-3 (Read Only). /
++ * Device Thresholding control register (Read/Write)
++ * <i>Offset: 830h</i> */
++ volatile uint32_t dtknqr3_dthrctl;
++ /** Device IN Token Queue Read Register-4 (Read Only). /
++ * Device IN EPs empty Inr. Mask Register (Read/Write)
++ * <i>Offset: 834h</i> */
++ volatile uint32_t dtknqr4_fifoemptymsk;
++ /** Device Each Endpoint Interrupt Register (Read Only). /
++ * <i>Offset: 838h</i> */
++ volatile uint32_t deachint;
++ /** Device Each Endpoint Interrupt mask Register (Read/Write). /
++ * <i>Offset: 83Ch</i> */
++ volatile uint32_t deachintmsk;
++ /** Device Each In Endpoint Interrupt mask Register (Read/Write). /
++ * <i>Offset: 840h</i> */
++ volatile uint32_t diepeachintmsk[MAX_EPS_CHANNELS];
++ /** Device Each Out Endpoint Interrupt mask Register (Read/Write). /
++ * <i>Offset: 880h</i> */
++ volatile uint32_t doepeachintmsk[MAX_EPS_CHANNELS];
++} dwc_otg_device_global_regs_t;
++
++/**
++ * This union represents the bit fields in the Device Configuration
++ * Register. Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements. Write the
++ * <i>d32</i> member to the dcfg register.
++ */
++typedef union dcfg_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct
++ {
++ /** Device Speed */
++ unsigned devspd : 2;
++ /** Non Zero Length Status OUT Handshake */
++ unsigned nzstsouthshk : 1;
++#define DWC_DCFG_SEND_STALL 1
++
++ unsigned reserved3 : 1;
++ /** Device Addresses */
++ unsigned devaddr : 7;
++ /** Periodic Frame Interval */
++ unsigned perfrint : 2;
++#define DWC_DCFG_FRAME_INTERVAL_80 0
++#define DWC_DCFG_FRAME_INTERVAL_85 1
++#define DWC_DCFG_FRAME_INTERVAL_90 2
++#define DWC_DCFG_FRAME_INTERVAL_95 3
++
++ unsigned reserved13_17 : 5;
++ /** In Endpoint Mis-match count */
++ unsigned epmscnt : 5;
++ /** Enable Descriptor DMA in Device mode */
++ unsigned descdma : 1;
++ } b;
++} dcfg_data_t;
++
++/**
++ * This union represents the bit fields in the Device Control
++ * Register. Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union dctl_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct
++ {
++ /** Remote Wakeup */
++ unsigned rmtwkupsig : 1;
++ /** Soft Disconnect */
++ unsigned sftdiscon : 1;
++ /** Global Non-Periodic IN NAK Status */
++ unsigned gnpinnaksts : 1;
++ /** Global OUT NAK Status */
++ unsigned goutnaksts : 1;
++ /** Test Control */
++ unsigned tstctl : 3;
++ /** Set Global Non-Periodic IN NAK */
++ unsigned sgnpinnak : 1;
++ /** Clear Global Non-Periodic IN NAK */
++ unsigned cgnpinnak : 1;
++ /** Set Global OUT NAK */
++ unsigned sgoutnak : 1;
++ /** Clear Global OUT NAK */
++ unsigned cgoutnak : 1;
++
++ /** Power-On Programming Done */
++ unsigned pwronprgdone : 1;
++ /** Global Continue on BNA */
++ unsigned gcontbna : 1;
++ /** Global Multi Count */
++ unsigned gmc : 2;
++ /** Ignore Frame Number for ISOC EPs */
++ unsigned ifrmnum : 1;
++ /** NAK on Babble */
++ unsigned nakonbble : 1;
++
++ unsigned reserved16_31 : 16;
++ } b;
++} dctl_data_t;
++
++/**
++ * This union represents the bit fields in the Device Status
++ * Register. Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union dsts_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct
++ {
++ /** Suspend Status */
++ unsigned suspsts : 1;
++ /** Enumerated Speed */
++ unsigned enumspd : 2;
++#define DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ 0
++#define DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ 1
++#define DWC_DSTS_ENUMSPD_LS_PHY_6MHZ 2
++#define DWC_DSTS_ENUMSPD_FS_PHY_48MHZ 3
++ /** Erratic Error */
++ unsigned errticerr : 1;
++ unsigned reserved4_7: 4;
++ /** Frame or Microframe Number of the received SOF */
++ unsigned soffn : 14;
++ unsigned reserved22_31 : 10;
++ } b;
++} dsts_data_t;
++
++
++/**
++ * This union represents the bit fields in the Device IN EP Interrupt
++ * Register and the Device IN EP Common Mask Register.
++ *
++ * - Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements.
++ */
++typedef union diepint_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct
++ {
++ /** Transfer complete mask */
++ unsigned xfercompl : 1;
++ /** Endpoint disable mask */
++ unsigned epdisabled : 1;
++ /** AHB Error mask */
++ unsigned ahberr : 1;
++ /** TimeOUT Handshake mask (non-ISOC EPs) */
++ unsigned timeout : 1;
++ /** IN Token received with TxF Empty mask */
++ unsigned intktxfemp : 1;
++ /** IN Token Received with EP mismatch mask */
++ unsigned intknepmis : 1;
++ /** IN Endpoint HAK Effective mask */
++ unsigned inepnakeff : 1;
++ /** IN Endpoint HAK Effective mask */
++ unsigned emptyintr : 1;
++
++ unsigned txfifoundrn : 1;
++
++ /** BNA Interrupt mask */
++ unsigned bna : 1;
++
++ unsigned reserved10_12 : 3;
++ /** BNA Interrupt mask */
++ unsigned nak : 1;
++
++ unsigned reserved14_31 : 18;
++ } b;
++} diepint_data_t;
++
++/**
++ * This union represents the bit fields in the Device IN EP
++ * Common/Dedicated Interrupt Mask Register.
++ */
++typedef union diepint_data diepmsk_data_t;
++
++/**
++ * This union represents the bit fields in the Device OUT EP Interrupt
++ * Registerand Device OUT EP Common Interrupt Mask Register.
++ *
++ * - Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements.
++ */
++typedef union doepint_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct
++ {
++ /** Transfer complete */
++ unsigned xfercompl : 1;
++ /** Endpoint disable */
++ unsigned epdisabled : 1;
++ /** AHB Error */
++ unsigned ahberr : 1;
++ /** Setup Phase Done (contorl EPs) */
++ unsigned setup : 1;
++ /** OUT Token Received when Endpoint Disabled */
++ unsigned outtknepdis : 1;
++
++ unsigned stsphsercvd : 1;
++ /** Back-to-Back SETUP Packets Received */
++ unsigned back2backsetup : 1;
++
++ unsigned reserved7 : 1;
++ /** OUT packet Error */
++ unsigned outpkterr : 1;
++ /** BNA Interrupt */
++ unsigned bna : 1;
++
++ unsigned reserved10 : 1;
++ /** Packet Drop Status */
++ unsigned pktdrpsts : 1;
++ /** Babble Interrupt */
++ unsigned babble : 1;
++ /** NAK Interrupt */
++ unsigned nak : 1;
++ /** NYET Interrupt */
++ unsigned nyet : 1;
++
++ unsigned reserved15_31 : 17;
++ } b;
++} doepint_data_t;
++
++/**
++ * This union represents the bit fields in the Device OUT EP
++ * Common/Dedicated Interrupt Mask Register.
++ */
++typedef union doepint_data doepmsk_data_t;
++
++/**
++ * This union represents the bit fields in the Device All EP Interrupt
++ * and Mask Registers.
++ * - Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements.
++ */
++typedef union daint_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct
++ {
++ /** IN Endpoint bits */
++ unsigned in : 16;
++ /** OUT Endpoint bits */
++ unsigned out : 16;
++ } ep;
++ struct
++ {
++ /** IN Endpoint bits */
++ unsigned inep0 : 1;
++ unsigned inep1 : 1;
++ unsigned inep2 : 1;
++ unsigned inep3 : 1;
++ unsigned inep4 : 1;
++ unsigned inep5 : 1;
++ unsigned inep6 : 1;
++ unsigned inep7 : 1;
++ unsigned inep8 : 1;
++ unsigned inep9 : 1;
++ unsigned inep10 : 1;
++ unsigned inep11 : 1;
++ unsigned inep12 : 1;
++ unsigned inep13 : 1;
++ unsigned inep14 : 1;
++ unsigned inep15 : 1;
++ /** OUT Endpoint bits */
++ unsigned outep0 : 1;
++ unsigned outep1 : 1;
++ unsigned outep2 : 1;
++ unsigned outep3 : 1;
++ unsigned outep4 : 1;
++ unsigned outep5 : 1;
++ unsigned outep6 : 1;
++ unsigned outep7 : 1;
++ unsigned outep8 : 1;
++ unsigned outep9 : 1;
++ unsigned outep10 : 1;
++ unsigned outep11 : 1;
++ unsigned outep12 : 1;
++ unsigned outep13 : 1;
++ unsigned outep14 : 1;
++ unsigned outep15 : 1;
++ } b;
++} daint_data_t;
++
++/**
++ * This union represents the bit fields in the Device IN Token Queue
++ * Read Registers.
++ * - Read the register into the <i>d32</i> member.
++ * - READ-ONLY Register
++ */
++typedef union dtknq1_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct
++ {
++ /** In Token Queue Write Pointer */
++ unsigned intknwptr : 5;
++ /** Reserved */
++ unsigned reserved05_06 : 2;
++ /** write pointer has wrapped. */
++ unsigned wrap_bit : 1;
++ /** EP Numbers of IN Tokens 0 ... 4 */
++ unsigned epnums0_5 : 24;
++ }b;
++} dtknq1_data_t;
++
++/**
++ * This union represents Threshold control Register
++ * - Read and write the register into the <i>d32</i> member.
++ * - READ-WRITABLE Register
++ */
++typedef union dthrctl_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct
++ {
++ /** non ISO Tx Thr. Enable */
++ unsigned non_iso_thr_en : 1;
++ /** ISO Tx Thr. Enable */
++ unsigned iso_thr_en : 1;
++ /** Tx Thr. Length */
++ unsigned tx_thr_len : 9;
++ /** Reserved */
++ unsigned reserved11_15 : 5;
++ /** Rx Thr. Enable */
++ unsigned rx_thr_en : 1;
++ /** Rx Thr. Length */
++ unsigned rx_thr_len : 9;
++ /** Reserved */
++ unsigned reserved26_31 : 6;
++ }b;
++} dthrctl_data_t;
++
++
++/**
++ * Device Logical IN Endpoint-Specific Registers. <i>Offsets
++ * 900h-AFCh</i>
++ *
++ * There will be one set of endpoint registers per logical endpoint
++ * implemented.
++ *
++ * <i>These registers are visible only in Device mode and must not be
++ * accessed in Host mode, as the results are unknown.</i>
++ */
++typedef struct dwc_otg_dev_in_ep_regs
++{
++ /** Device IN Endpoint Control Register. <i>Offset:900h +
++ * (ep_num * 20h) + 00h</i> */
++ volatile uint32_t diepctl;
++ /** Reserved. <i>Offset:900h + (ep_num * 20h) + 04h</i> */
++ uint32_t reserved04;
++ /** Device IN Endpoint Interrupt Register. <i>Offset:900h +
++ * (ep_num * 20h) + 08h</i> */
++ volatile uint32_t diepint;
++ /** Reserved. <i>Offset:900h + (ep_num * 20h) + 0Ch</i> */
++ uint32_t reserved0C;
++ /** Device IN Endpoint Transfer Size
++ * Register. <i>Offset:900h + (ep_num * 20h) + 10h</i> */
++ volatile uint32_t dieptsiz;
++ /** Device IN Endpoint DMA Address Register. <i>Offset:900h +
++ * (ep_num * 20h) + 14h</i> */
++ volatile uint32_t diepdma;
++ /** Device IN Endpoint Transmit FIFO Status Register. <i>Offset:900h +
++ * (ep_num * 20h) + 18h</i> */
++ volatile uint32_t dtxfsts;
++ /** Device IN Endpoint DMA Buffer Register. <i>Offset:900h +
++ * (ep_num * 20h) + 1Ch</i> */
++ volatile uint32_t diepdmab;
++} dwc_otg_dev_in_ep_regs_t;
++
++/**
++ * Device Logical OUT Endpoint-Specific Registers. <i>Offsets:
++ * B00h-CFCh</i>
++ *
++ * There will be one set of endpoint registers per logical endpoint
++ * implemented.
++ *
++ * <i>These registers are visible only in Device mode and must not be
++ * accessed in Host mode, as the results are unknown.</i>
++ */
++typedef struct dwc_otg_dev_out_ep_regs
++{
++ /** Device OUT Endpoint Control Register. <i>Offset:B00h +
++ * (ep_num * 20h) + 00h</i> */
++ volatile uint32_t doepctl;
++ /** Device OUT Endpoint Frame number Register. <i>Offset:
++ * B00h + (ep_num * 20h) + 04h</i> */
++ volatile uint32_t doepfn;
++ /** Device OUT Endpoint Interrupt Register. <i>Offset:B00h +
++ * (ep_num * 20h) + 08h</i> */
++ volatile uint32_t doepint;
++ /** Reserved. <i>Offset:B00h + (ep_num * 20h) + 0Ch</i> */
++ uint32_t reserved0C;
++ /** Device OUT Endpoint Transfer Size Register. <i>Offset:
++ * B00h + (ep_num * 20h) + 10h</i> */
++ volatile uint32_t doeptsiz;
++ /** Device OUT Endpoint DMA Address Register. <i>Offset:B00h
++ * + (ep_num * 20h) + 14h</i> */
++ volatile uint32_t doepdma;
++ /** Reserved. <i>Offset:B00h + * (ep_num * 20h) + 1Ch</i> */
++ uint32_t unused;
++ /** Device OUT Endpoint DMA Buffer Register. <i>Offset:B00h
++ * + (ep_num * 20h) + 1Ch</i> */
++ uint32_t doepdmab;
++} dwc_otg_dev_out_ep_regs_t;
++
++/**
++ * This union represents the bit fields in the Device EP Control
++ * Register. Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union depctl_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct
++ {
++ /** Maximum Packet Size
++ * IN/OUT EPn
++ * IN/OUT EP0 - 2 bits
++ * 2'b00: 64 Bytes
++ * 2'b01: 32
++ * 2'b10: 16
++ * 2'b11: 8 */
++ unsigned mps : 11;
++#define DWC_DEP0CTL_MPS_64 0
++#define DWC_DEP0CTL_MPS_32 1
++#define DWC_DEP0CTL_MPS_16 2
++#define DWC_DEP0CTL_MPS_8 3
++
++ /** Next Endpoint
++ * IN EPn/IN EP0
++ * OUT EPn/OUT EP0 - reserved */
++ unsigned nextep : 4;
++
++ /** USB Active Endpoint */
++ unsigned usbactep : 1;
++
++ /** Endpoint DPID (INTR/Bulk IN and OUT endpoints)
++ * This field contains the PID of the packet going to
++ * be received or transmitted on this endpoint. The
++ * application should program the PID of the first
++ * packet going to be received or transmitted on this
++ * endpoint , after the endpoint is
++ * activated. Application use the SetD1PID and
++ * SetD0PID fields of this register to program either
++ * D0 or D1 PID.
++ *
++ * The encoding for this field is
++ * - 0: D0
++ * - 1: D1
++ */
++ unsigned dpid : 1;
++
++ /** NAK Status */
++ unsigned naksts : 1;
++
++ /** Endpoint Type
++ * 2'b00: Control
++ * 2'b01: Isochronous
++ * 2'b10: Bulk
++ * 2'b11: Interrupt */
++ unsigned eptype : 2;
++
++ /** Snoop Mode
++ * OUT EPn/OUT EP0
++ * IN EPn/IN EP0 - reserved */
++ unsigned snp : 1;
++
++ /** Stall Handshake */
++ unsigned stall : 1;
++
++ /** Tx Fifo Number
++ * IN EPn/IN EP0
++ * OUT EPn/OUT EP0 - reserved */
++ unsigned txfnum : 4;
++
++ /** Clear NAK */
++ unsigned cnak : 1;
++ /** Set NAK */
++ unsigned snak : 1;
++ /** Set DATA0 PID (INTR/Bulk IN and OUT endpoints)
++ * Writing to this field sets the Endpoint DPID (DPID)
++ * field in this register to DATA0. Set Even
++ * (micro)frame (SetEvenFr) (ISO IN and OUT Endpoints)
++ * Writing to this field sets the Even/Odd
++ * (micro)frame (EO_FrNum) field to even (micro)
++ * frame.
++ */
++ unsigned setd0pid : 1;
++ /** Set DATA1 PID (INTR/Bulk IN and OUT endpoints)
++ * Writing to this field sets the Endpoint DPID (DPID)
++ * field in this register to DATA1 Set Odd
++ * (micro)frame (SetOddFr) (ISO IN and OUT Endpoints)
++ * Writing to this field sets the Even/Odd
++ * (micro)frame (EO_FrNum) field to odd (micro) frame.
++ */
++ unsigned setd1pid : 1;
++
++ /** Endpoint Disable */
++ unsigned epdis : 1;
++ /** Endpoint Enable */
++ unsigned epena : 1;
++ } b;
++} depctl_data_t;
++
++/**
++ * This union represents the bit fields in the Device EP Transfer
++ * Size Register. Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union deptsiz_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct {
++ /** Transfer size */
++ unsigned xfersize : 19;
++ /** Packet Count */
++ unsigned pktcnt : 10;
++ /** Multi Count - Periodic IN endpoints */
++ unsigned mc : 2;
++ unsigned reserved : 1;
++ } b;
++} deptsiz_data_t;
++
++/**
++ * This union represents the bit fields in the Device EP 0 Transfer
++ * Size Register. Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union deptsiz0_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct {
++ /** Transfer size */
++ unsigned xfersize : 7;
++ /** Reserved */
++ unsigned reserved7_18 : 12;
++ /** Packet Count */
++ unsigned pktcnt : 1;
++ /** Reserved */
++ unsigned reserved20_28 : 9;
++ /**Setup Packet Count (DOEPTSIZ0 Only) */
++ unsigned supcnt : 2;
++ unsigned reserved31;
++ } b;
++} deptsiz0_data_t;
++
++
++/////////////////////////////////////////////////
++// DMA Descriptor Specific Structures
++//
++
++/** Buffer status definitions */
++
++#define BS_HOST_READY 0x0
++#define BS_DMA_BUSY 0x1
++#define BS_DMA_DONE 0x2
++#define BS_HOST_BUSY 0x3
++
++/** Receive/Transmit status definitions */
++
++#define RTS_SUCCESS 0x0
++#define RTS_BUFFLUSH 0x1
++#define RTS_RESERVED 0x2
++#define RTS_BUFERR 0x3
++
++
++/**
++ * This union represents the bit fields in the DMA Descriptor
++ * status quadlet. Read the quadlet into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it, <i>b_iso_out</i> and
++ * <i>b_iso_in</i> elements.
++ */
++typedef union desc_sts_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** quadlet bits */
++ struct {
++ /** Received number of bytes */
++ unsigned bytes : 16;
++
++ unsigned reserved16_22 : 7;
++ /** Multiple Transfer - only for OUT EPs */
++ unsigned mtrf : 1;
++ /** Setup Packet received - only for OUT EPs */
++ unsigned sr : 1;
++ /** Interrupt On Complete */
++ unsigned ioc : 1;
++ /** Short Packet */
++ unsigned sp : 1;
++ /** Last */
++ unsigned l : 1;
++ /** Receive Status */
++ unsigned sts : 2;
++ /** Buffer Status */
++ unsigned bs : 2;
++ } b;
++
++#ifdef DWC_EN_ISOC
++ /** iso out quadlet bits */
++ struct {
++ /** Received number of bytes */
++ unsigned rxbytes : 11;
++
++ unsigned reserved11 : 1;
++ /** Frame Number */
++ unsigned framenum : 11;
++ /** Received ISO Data PID */
++ unsigned pid : 2;
++ /** Interrupt On Complete */
++ unsigned ioc : 1;
++ /** Short Packet */
++ unsigned sp : 1;
++ /** Last */
++ unsigned l : 1;
++ /** Receive Status */
++ unsigned rxsts : 2;
++ /** Buffer Status */
++ unsigned bs : 2;
++ } b_iso_out;
++
++ /** iso in quadlet bits */
++ struct {
++ /** Transmited number of bytes */
++ unsigned txbytes : 12;
++ /** Frame Number */
++ unsigned framenum : 11;
++ /** Transmited ISO Data PID */
++ unsigned pid : 2;
++ /** Interrupt On Complete */
++ unsigned ioc : 1;
++ /** Short Packet */
++ unsigned sp : 1;
++ /** Last */
++ unsigned l : 1;
++ /** Transmit Status */
++ unsigned txsts : 2;
++ /** Buffer Status */
++ unsigned bs : 2;
++ } b_iso_in;
++#endif //DWC_EN_ISOC
++} desc_sts_data_t;
++
++/**
++ * DMA Descriptor structure
++ *
++ * DMA Descriptor structure contains two quadlets:
++ * Status quadlet and Data buffer pointer.
++ */
++typedef struct dwc_otg_dma_desc
++{
++ /** DMA Descriptor status quadlet */
++ desc_sts_data_t status;
++ /** DMA Descriptor data buffer pointer */
++ dma_addr_t buf;
++} dwc_otg_dma_desc_t;
++
++/**
++ * The dwc_otg_dev_if structure contains information needed to manage
++ * the DWC_otg controller acting in device mode. It represents the
++ * programming view of the device-specific aspects of the controller.
++ */
++typedef struct dwc_otg_dev_if
++{
++ /** Pointer to device Global registers.
++ * Device Global Registers starting at offset 800h
++ */
++ dwc_otg_device_global_regs_t *dev_global_regs;
++#define DWC_DEV_GLOBAL_REG_OFFSET 0x800
++
++ /**
++ * Device Logical IN Endpoint-Specific Registers 900h-AFCh
++ */
++ dwc_otg_dev_in_ep_regs_t *in_ep_regs[MAX_EPS_CHANNELS];
++#define DWC_DEV_IN_EP_REG_OFFSET 0x900
++#define DWC_EP_REG_OFFSET 0x20
++
++ /** Device Logical OUT Endpoint-Specific Registers B00h-CFCh */
++ dwc_otg_dev_out_ep_regs_t *out_ep_regs[MAX_EPS_CHANNELS];
++#define DWC_DEV_OUT_EP_REG_OFFSET 0xB00
++
++ /* Device configuration information*/
++ uint8_t speed; /**< Device Speed 0: Unknown, 1: LS, 2:FS, 3: HS */
++ uint8_t num_in_eps; /**< Number # of Tx EP range: 0-15 exept ep0 */
++ uint8_t num_out_eps; /**< Number # of Rx EP range: 0-15 exept ep 0*/
++
++ /** Size of periodic FIFOs (Bytes) */
++ uint16_t perio_tx_fifo_size[MAX_PERIO_FIFOS];
++
++ /** Size of Tx FIFOs (Bytes) */
++ uint16_t tx_fifo_size[MAX_TX_FIFOS];
++
++ /** Thresholding enable flags and length varaiables **/
++ uint16_t rx_thr_en;
++ uint16_t iso_tx_thr_en;
++ uint16_t non_iso_tx_thr_en;
++
++ uint16_t rx_thr_length;
++ uint16_t tx_thr_length;
++
++ /**
++ * Pointers to the DMA Descriptors for EP0 Control
++ * transfers (virtual and physical)
++ */
++
++ /** 2 descriptors for SETUP packets */
++ uint32_t dma_setup_desc_addr[2];
++ dwc_otg_dma_desc_t* setup_desc_addr[2];
++
++ /** Pointer to Descriptor with latest SETUP packet */
++ dwc_otg_dma_desc_t* psetup;
++
++ /** Index of current SETUP handler descriptor */
++ uint32_t setup_desc_index;
++
++ /** Descriptor for Data In or Status In phases */
++ uint32_t dma_in_desc_addr;
++ dwc_otg_dma_desc_t* in_desc_addr;;
++
++ /** Descriptor for Data Out or Status Out phases */
++ uint32_t dma_out_desc_addr;
++ dwc_otg_dma_desc_t* out_desc_addr;
++
++} dwc_otg_dev_if_t;
++
++
++
++
++/////////////////////////////////////////////////
++// Host Mode Register Structures
++//
++/**
++ * The Host Global Registers structure defines the size and relative
++ * field offsets for the Host Mode Global Registers. Host Global
++ * Registers offsets 400h-7FFh.
++*/
++typedef struct dwc_otg_host_global_regs
++{
++ /** Host Configuration Register. <i>Offset: 400h</i> */
++ volatile uint32_t hcfg;
++ /** Host Frame Interval Register. <i>Offset: 404h</i> */
++ volatile uint32_t hfir;
++ /** Host Frame Number / Frame Remaining Register. <i>Offset: 408h</i> */
++ volatile uint32_t hfnum;
++ /** Reserved. <i>Offset: 40Ch</i> */
++ uint32_t reserved40C;
++ /** Host Periodic Transmit FIFO/ Queue Status Register. <i>Offset: 410h</i> */
++ volatile uint32_t hptxsts;
++ /** Host All Channels Interrupt Register. <i>Offset: 414h</i> */
++ volatile uint32_t haint;
++ /** Host All Channels Interrupt Mask Register. <i>Offset: 418h</i> */
++ volatile uint32_t haintmsk;
++} dwc_otg_host_global_regs_t;
++
++/**
++ * This union represents the bit fields in the Host Configuration Register.
++ * Read the register into the <i>d32</i> member then set/clear the bits using
++ * the <i>b</i>it elements. Write the <i>d32</i> member to the hcfg register.
++ */
++typedef union hcfg_data
++{
++ /** raw register data */
++ uint32_t d32;
++
++ /** register bits */
++ struct
++ {
++ /** FS/LS Phy Clock Select */
++ unsigned fslspclksel : 2;
++#define DWC_HCFG_30_60_MHZ 0
++#define DWC_HCFG_48_MHZ 1
++#define DWC_HCFG_6_MHZ 2
++
++ /** FS/LS Only Support */
++ unsigned fslssupp : 1;
++ } b;
++} hcfg_data_t;
++
++/**
++ * This union represents the bit fields in the Host Frame Remaing/Number
++ * Register.
++ */
++typedef union hfir_data
++{
++ /** raw register data */
++ uint32_t d32;
++
++ /** register bits */
++ struct
++ {
++ unsigned frint : 16;
++ unsigned reserved : 16;
++ } b;
++} hfir_data_t;
++
++/**
++ * This union represents the bit fields in the Host Frame Remaing/Number
++ * Register.
++ */
++typedef union hfnum_data
++{
++ /** raw register data */
++ uint32_t d32;
++
++ /** register bits */
++ struct
++ {
++ unsigned frnum : 16;
++#define DWC_HFNUM_MAX_FRNUM 0x3FFF
++ unsigned frrem : 16;
++ } b;
++} hfnum_data_t;
++
++typedef union hptxsts_data
++{
++ /** raw register data */
++ uint32_t d32;
++
++ /** register bits */
++ struct
++ {
++ unsigned ptxfspcavail : 16;
++ unsigned ptxqspcavail : 8;
++ /** Top of the Periodic Transmit Request Queue
++ * - bit 24 - Terminate (last entry for the selected channel)
++ * - bits 26:25 - Token Type
++ * - 2'b00 - Zero length
++ * - 2'b01 - Ping
++ * - 2'b10 - Disable
++ * - bits 30:27 - Channel Number
++ * - bit 31 - Odd/even microframe
++ */
++ unsigned ptxqtop_terminate : 1;
++ unsigned ptxqtop_token : 2;
++ unsigned ptxqtop_chnum : 4;
++ unsigned ptxqtop_odd : 1;
++ } b;
++} hptxsts_data_t;
++
++/**
++ * This union represents the bit fields in the Host Port Control and Status
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
++ * hprt0 register.
++ */
++typedef union hprt0_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct
++ {
++ unsigned prtconnsts : 1;
++ unsigned prtconndet : 1;
++ unsigned prtena : 1;
++ unsigned prtenchng : 1;
++ unsigned prtovrcurract : 1;
++ unsigned prtovrcurrchng : 1;
++ unsigned prtres : 1;
++ unsigned prtsusp : 1;
++ unsigned prtrst : 1;
++ unsigned reserved9 : 1;
++ unsigned prtlnsts : 2;
++ unsigned prtpwr : 1;
++ unsigned prttstctl : 4;
++ unsigned prtspd : 2;
++#define DWC_HPRT0_PRTSPD_HIGH_SPEED 0
++#define DWC_HPRT0_PRTSPD_FULL_SPEED 1
++#define DWC_HPRT0_PRTSPD_LOW_SPEED 2
++ unsigned reserved19_31 : 13;
++ } b;
++} hprt0_data_t;
++
++/**
++ * This union represents the bit fields in the Host All Interrupt
++ * Register.
++ */
++typedef union haint_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct
++ {
++ unsigned ch0 : 1;
++ unsigned ch1 : 1;
++ unsigned ch2 : 1;
++ unsigned ch3 : 1;
++ unsigned ch4 : 1;
++ unsigned ch5 : 1;
++ unsigned ch6 : 1;
++ unsigned ch7 : 1;
++ unsigned ch8 : 1;
++ unsigned ch9 : 1;
++ unsigned ch10 : 1;
++ unsigned ch11 : 1;
++ unsigned ch12 : 1;
++ unsigned ch13 : 1;
++ unsigned ch14 : 1;
++ unsigned ch15 : 1;
++ unsigned reserved : 16;
++ } b;
++
++ struct
++ {
++ unsigned chint : 16;
++ unsigned reserved : 16;
++ } b2;
++} haint_data_t;
++
++/**
++ * This union represents the bit fields in the Host All Interrupt
++ * Register.
++ */
++typedef union haintmsk_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct
++ {
++ unsigned ch0 : 1;
++ unsigned ch1 : 1;
++ unsigned ch2 : 1;
++ unsigned ch3 : 1;
++ unsigned ch4 : 1;
++ unsigned ch5 : 1;
++ unsigned ch6 : 1;
++ unsigned ch7 : 1;
++ unsigned ch8 : 1;
++ unsigned ch9 : 1;
++ unsigned ch10 : 1;
++ unsigned ch11 : 1;
++ unsigned ch12 : 1;
++ unsigned ch13 : 1;
++ unsigned ch14 : 1;
++ unsigned ch15 : 1;
++ unsigned reserved : 16;
++ } b;
++
++ struct
++ {
++ unsigned chint : 16;
++ unsigned reserved : 16;
++ } b2;
++} haintmsk_data_t;
++
++/**
++ * Host Channel Specific Registers. <i>500h-5FCh</i>
++ */
++typedef struct dwc_otg_hc_regs
++{
++ /** Host Channel 0 Characteristic Register. <i>Offset: 500h + (chan_num * 20h) + 00h</i> */
++ volatile uint32_t hcchar;
++ /** Host Channel 0 Split Control Register. <i>Offset: 500h + (chan_num * 20h) + 04h</i> */
++ volatile uint32_t hcsplt;
++ /** Host Channel 0 Interrupt Register. <i>Offset: 500h + (chan_num * 20h) + 08h</i> */
++ volatile uint32_t hcint;
++ /** Host Channel 0 Interrupt Mask Register. <i>Offset: 500h + (chan_num * 20h) + 0Ch</i> */
++ volatile uint32_t hcintmsk;
++ /** Host Channel 0 Transfer Size Register. <i>Offset: 500h + (chan_num * 20h) + 10h</i> */
++ volatile uint32_t hctsiz;
++ /** Host Channel 0 DMA Address Register. <i>Offset: 500h + (chan_num * 20h) + 14h</i> */
++ volatile uint32_t hcdma;
++ /** Reserved. <i>Offset: 500h + (chan_num * 20h) + 18h - 500h + (chan_num * 20h) + 1Ch</i> */
++ uint32_t reserved[2];
++} dwc_otg_hc_regs_t;
++
++/**
++ * This union represents the bit fields in the Host Channel Characteristics
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
++ * hcchar register.
++ */
++typedef union hcchar_data
++{
++ /** raw register data */
++ uint32_t d32;
++
++ /** register bits */
++ struct
++ {
++ /** Maximum packet size in bytes */
++ unsigned mps : 11;
++
++ /** Endpoint number */
++ unsigned epnum : 4;
++
++ /** 0: OUT, 1: IN */
++ unsigned epdir : 1;
++
++ unsigned reserved : 1;
++
++ /** 0: Full/high speed device, 1: Low speed device */
++ unsigned lspddev : 1;
++
++ /** 0: Control, 1: Isoc, 2: Bulk, 3: Intr */
++ unsigned eptype : 2;
++
++ /** Packets per frame for periodic transfers. 0 is reserved. */
++ unsigned multicnt : 2;
++
++ /** Device address */
++ unsigned devaddr : 7;
++
++ /**
++ * Frame to transmit periodic transaction.
++ * 0: even, 1: odd
++ */
++ unsigned oddfrm : 1;
++
++ /** Channel disable */
++ unsigned chdis : 1;
++
++ /** Channel enable */
++ unsigned chen : 1;
++ } b;
++} hcchar_data_t;
++
++typedef union hcsplt_data
++{
++ /** raw register data */
++ uint32_t d32;
++
++ /** register bits */
++ struct
++ {
++ /** Port Address */
++ unsigned prtaddr : 7;
++
++ /** Hub Address */
++ unsigned hubaddr : 7;
++
++ /** Transaction Position */
++ unsigned xactpos : 2;
++#define DWC_HCSPLIT_XACTPOS_MID 0
++#define DWC_HCSPLIT_XACTPOS_END 1
++#define DWC_HCSPLIT_XACTPOS_BEGIN 2
++#define DWC_HCSPLIT_XACTPOS_ALL 3
++
++ /** Do Complete Split */
++ unsigned compsplt : 1;
++
++ /** Reserved */
++ unsigned reserved : 14;
++
++ /** Split Enble */
++ unsigned spltena : 1;
++ } b;
++} hcsplt_data_t;
++
++
++/**
++ * This union represents the bit fields in the Host All Interrupt
++ * Register.
++ */
++typedef union hcint_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct
++ {
++ /** Transfer Complete */
++ unsigned xfercomp : 1;
++ /** Channel Halted */
++ unsigned chhltd : 1;
++ /** AHB Error */
++ unsigned ahberr : 1;
++ /** STALL Response Received */
++ unsigned stall : 1;
++ /** NAK Response Received */
++ unsigned nak : 1;
++ /** ACK Response Received */
++ unsigned ack : 1;
++ /** NYET Response Received */
++ unsigned nyet : 1;
++ /** Transaction Err */
++ unsigned xacterr : 1;
++ /** Babble Error */
++ unsigned bblerr : 1;
++ /** Frame Overrun */
++ unsigned frmovrun : 1;
++ /** Data Toggle Error */
++ unsigned datatglerr : 1;
++ /** Reserved */
++ unsigned reserved : 21;
++ } b;
++} hcint_data_t;
++
++/**
++ * This union represents the bit fields in the Host Channel Transfer Size
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
++ * hcchar register.
++ */
++typedef union hctsiz_data
++{
++ /** raw register data */
++ uint32_t d32;
++
++ /** register bits */
++ struct
++ {
++ /** Total transfer size in bytes */
++ unsigned xfersize : 19;
++
++ /** Data packets to transfer */
++ unsigned pktcnt : 10;
++
++ /**
++ * Packet ID for next data packet
++ * 0: DATA0
++ * 1: DATA2
++ * 2: DATA1
++ * 3: MDATA (non-Control), SETUP (Control)
++ */
++ unsigned pid : 2;
++#define DWC_HCTSIZ_DATA0 0
++#define DWC_HCTSIZ_DATA1 2
++#define DWC_HCTSIZ_DATA2 1
++#define DWC_HCTSIZ_MDATA 3
++#define DWC_HCTSIZ_SETUP 3
++
++ /** Do PING protocol when 1 */
++ unsigned dopng : 1;
++ } b;
++} hctsiz_data_t;
++
++/**
++ * This union represents the bit fields in the Host Channel Interrupt Mask
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
++ * hcintmsk register.
++ */
++typedef union hcintmsk_data
++{
++ /** raw register data */
++ uint32_t d32;
++
++ /** register bits */
++ struct
++ {
++ unsigned xfercompl : 1;
++ unsigned chhltd : 1;
++ unsigned ahberr : 1;
++ unsigned stall : 1;
++ unsigned nak : 1;
++ unsigned ack : 1;
++ unsigned nyet : 1;
++ unsigned xacterr : 1;
++ unsigned bblerr : 1;
++ unsigned frmovrun : 1;
++ unsigned datatglerr : 1;
++ unsigned reserved : 21;
++ } b;
++} hcintmsk_data_t;
++
++/** OTG Host Interface Structure.
++ *
++ * The OTG Host Interface Structure structure contains information
++ * needed to manage the DWC_otg controller acting in host mode. It
++ * represents the programming view of the host-specific aspects of the
++ * controller.
++ */
++typedef struct dwc_otg_host_if
++{
++ /** Host Global Registers starting at offset 400h.*/
++ dwc_otg_host_global_regs_t *host_global_regs;
++#define DWC_OTG_HOST_GLOBAL_REG_OFFSET 0x400
++
++ /** Host Port 0 Control and Status Register */
++ volatile uint32_t *hprt0;
++#define DWC_OTG_HOST_PORT_REGS_OFFSET 0x440
++
++
++ /** Host Channel Specific Registers at offsets 500h-5FCh. */
++ dwc_otg_hc_regs_t *hc_regs[MAX_EPS_CHANNELS];
++#define DWC_OTG_HOST_CHAN_REGS_OFFSET 0x500
++#define DWC_OTG_CHAN_REGS_OFFSET 0x20
++
++
++ /* Host configuration information */
++ /** Number of Host Channels (range: 1-16) */
++ uint8_t num_host_channels;
++ /** Periodic EPs supported (0: no, 1: yes) */
++ uint8_t perio_eps_supported;
++ /** Periodic Tx FIFO Size (Only 1 host periodic Tx FIFO) */
++ uint16_t perio_tx_fifo_size;
++
++} dwc_otg_host_if_t;
++
++
++/**
++ * This union represents the bit fields in the Power and Clock Gating Control
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements.
++ */
++typedef union pcgcctl_data
++{
++ /** raw register data */
++ uint32_t d32;
++
++ /** register bits */
++ struct
++ {
++ /** Stop Pclk */
++ unsigned stoppclk : 1;
++ /** Gate Hclk */
++ unsigned gatehclk : 1;
++ /** Power Clamp */
++ unsigned pwrclmp : 1;
++ /** Reset Power Down Modules */
++ unsigned rstpdwnmodule : 1;
++ /** PHY Suspended */
++ unsigned physuspended : 1;
++
++ unsigned reserved : 27;
++ } b;
++} pcgcctl_data_t;
++
++
++#endif
+diff --git a/drivers/usb/dwc_otg/linux/dwc_otg_plat.h b/drivers/usb/dwc_otg/linux/dwc_otg_plat.h
+new file mode 100644
+index 0000000..618151b
+--- /dev/null
++++ b/drivers/usb/dwc_otg/linux/dwc_otg_plat.h
+@@ -0,0 +1,260 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/platform/dwc_otg_plat.h $
++ * $Revision: 1.2 $
++ * $Date: 2008-11-21 05:39:16 $
++ * $Change: 1064915 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#if !defined(__DWC_OTG_PLAT_H__)
++#define __DWC_OTG_PLAT_H__
++
++#include <linux/types.h>
++#include <linux/slab.h>
++#include <linux/list.h>
++#include <linux/delay.h>
++#include <asm/io.h>
++
++/**
++ * @file
++ *
++ * This file contains the Platform Specific constants, interfaces
++ * (functions and macros) for Linux.
++ *
++ */
++//#if !defined(__LINUX_ARM_ARCH__)
++//#error "The contents of this file is Linux specific!!!"
++//#endif
++
++/**
++ * Reads the content of a register.
++ *
++ * @param reg address of register to read.
++ * @return contents of the register.
++ *
++
++ * Usage:<br>
++ * <code>uint32_t dev_ctl = dwc_read_reg32(&dev_regs->dctl);</code>
++ */
++static __inline__ uint32_t dwc_read_reg32( volatile uint32_t *reg)
++{
++ return readl(reg);
++};
++
++/**
++ * Writes a register with a 32 bit value.
++ *
++ * @param reg address of register to read.
++ * @param value to write to _reg.
++ *
++ * Usage:<br>
++ * <code>dwc_write_reg32(&dev_regs->dctl, 0); </code>
++ */
++static __inline__ void dwc_write_reg32( volatile uint32_t *reg, const uint32_t value)
++{
++ writel( value, reg );
++};
++
++/**
++ * This function modifies bit values in a register. Using the
++ * algorithm: (reg_contents & ~clear_mask) | set_mask.
++ *
++ * @param reg address of register to read.
++ * @param clear_mask bit mask to be cleared.
++ * @param set_mask bit mask to be set.
++ *
++ * Usage:<br>
++ * <code> // Clear the SOF Interrupt Mask bit and <br>
++ * // set the OTG Interrupt mask bit, leaving all others as they were.
++ * dwc_modify_reg32(&dev_regs->gintmsk, DWC_SOF_INT, DWC_OTG_INT);</code>
++ */
++static __inline__
++ void dwc_modify_reg32( volatile uint32_t *reg, const uint32_t clear_mask, const uint32_t set_mask)
++{
++ writel( (readl(reg) & ~clear_mask) | set_mask, reg );
++};
++
++
++/**
++ * Wrapper for the OS micro-second delay function.
++ * @param[in] usecs Microseconds of delay
++ */
++static __inline__ void UDELAY( const uint32_t usecs )
++{
++ udelay( usecs );
++}
++
++/**
++ * Wrapper for the OS milli-second delay function.
++ * @param[in] msecs milliseconds of delay
++ */
++static __inline__ void MDELAY( const uint32_t msecs )
++{
++ mdelay( msecs );
++}
++
++/**
++ * Wrapper for the Linux spin_lock. On the ARM (Integrator)
++ * spin_lock() is a nop.
++ *
++ * @param lock Pointer to the spinlock.
++ */
++static __inline__ void SPIN_LOCK( spinlock_t *lock )
++{
++ spin_lock(lock);
++}
++
++/**
++ * Wrapper for the Linux spin_unlock. On the ARM (Integrator)
++ * spin_lock() is a nop.
++ *
++ * @param lock Pointer to the spinlock.
++ */
++static __inline__ void SPIN_UNLOCK( spinlock_t *lock )
++{
++ spin_unlock(lock);
++}
++
++/**
++ * Wrapper (macro) for the Linux spin_lock_irqsave. On the ARM
++ * (Integrator) spin_lock() is a nop.
++ *
++ * @param l Pointer to the spinlock.
++ * @param f unsigned long for irq flags storage.
++ */
++#define SPIN_LOCK_IRQSAVE( l, f ) spin_lock_irqsave(l,f);
++
++/**
++ * Wrapper (macro) for the Linux spin_unlock_irqrestore. On the ARM
++ * (Integrator) spin_lock() is a nop.
++ *
++ * @param l Pointer to the spinlock.
++ * @param f unsigned long for irq flags storage.
++ */
++#define SPIN_UNLOCK_IRQRESTORE( l,f ) spin_unlock_irqrestore(l,f);
++
++/*
++ * Debugging support vanishes in non-debug builds.
++ */
++
++
++/**
++ * The Debug Level bit-mask variable.
++ */
++extern uint32_t g_dbg_lvl;
++/**
++ * Set the Debug Level variable.
++ */
++static inline uint32_t SET_DEBUG_LEVEL( const uint32_t new )
++{
++ uint32_t old = g_dbg_lvl;
++ g_dbg_lvl = new;
++ return old;
++}
++
++/** When debug level has the DBG_CIL bit set, display CIL Debug messages. */
++#define DBG_CIL (0x2)
++/** When debug level has the DBG_CILV bit set, display CIL Verbose debug
++ * messages */
++#define DBG_CILV (0x20)
++/** When debug level has the DBG_PCD bit set, display PCD (Device) debug
++ * messages */
++#define DBG_PCD (0x4)
++/** When debug level has the DBG_PCDV set, display PCD (Device) Verbose debug
++ * messages */
++#define DBG_PCDV (0x40)
++/** When debug level has the DBG_HCD bit set, display Host debug messages */
++#define DBG_HCD (0x8)
++/** When debug level has the DBG_HCDV bit set, display Verbose Host debug
++ * messages */
++#define DBG_HCDV (0x80)
++/** When debug level has the DBG_HCD_URB bit set, display enqueued URBs in host
++ * mode. */
++#define DBG_HCD_URB (0x800)
++
++/** When debug level has any bit set, display debug messages */
++#define DBG_ANY (0xFF)
++
++/** All debug messages off */
++#define DBG_OFF 0
++
++/** Prefix string for DWC_DEBUG print macros. */
++#define USB_DWC "dwc_otg: "
++
++/**
++ * Print a debug message when the Global debug level variable contains
++ * the bit defined in <code>lvl</code>.
++ *
++ * @param[in] lvl - Debug level, use one of the DBG_ constants above.
++ * @param[in] x - like printf
++ *
++ * Example:<p>
++ * <code>
++ * DWC_DEBUGPL( DBG_ANY, "%s(%p)\n", __func__, _reg_base_addr);
++ * </code>
++ * <br>
++ * results in:<br>
++ * <code>
++ * usb-DWC_otg: dwc_otg_cil_init(ca867000)
++ * </code>
++ */
++#ifdef DEBUG
++
++# define DWC_DEBUGPL(lvl, x...) do{ if ((lvl)&g_dbg_lvl)printk( KERN_DEBUG USB_DWC x ); }while(0)
++# define DWC_DEBUGP(x...) DWC_DEBUGPL(DBG_ANY, x )
++
++# define CHK_DEBUG_LEVEL(level) ((level) & g_dbg_lvl)
++
++#else
++
++# define DWC_DEBUGPL(lvl, x...) do{}while(0)
++# define DWC_DEBUGP(x...)
++
++# define CHK_DEBUG_LEVEL(level) (0)
++
++#endif /*DEBUG*/
++
++/**
++ * Print an Error message.
++ */
++#define DWC_ERROR(x...) printk( KERN_ERR USB_DWC x )
++/**
++ * Print a Warning message.
++ */
++#define DWC_WARN(x...) printk( KERN_WARNING USB_DWC x )
++/**
++ * Print a notice (normal but significant message).
++ */
++#define DWC_NOTICE(x...) printk( KERN_NOTICE USB_DWC x )
++/**
++ * Basic message printing.
++ */
++#define DWC_PRINT(x...) printk( KERN_INFO USB_DWC x )
++
++#endif
++
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0040-USB-add-mt7621-xhci-support.patch b/target/linux/ramips/patches-3.14/0040-USB-add-mt7621-xhci-support.patch
new file mode 100644
index 0000000000..31227fcd4f
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0040-USB-add-mt7621-xhci-support.patch
@@ -0,0 +1,5848 @@
+From 023e31c036fef5daf7711878590e0930544b5ad7 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 27 Jul 2014 11:10:49 +0100
+Subject: [PATCH 40/57] USB: add mt7621 xhci support
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/usb/core/hcd-pci.c | 6 +-
+ drivers/usb/core/hub.c | 2 +-
+ drivers/usb/core/port.c | 3 +-
+ drivers/usb/host/Kconfig | 8 +-
+ drivers/usb/host/Makefile | 8 +
+ drivers/usb/host/mtk-phy-7621.c | 445 +++++
+ drivers/usb/host/mtk-phy-7621.h | 2871 +++++++++++++++++++++++++++++++++
+ drivers/usb/host/mtk-phy-ahb.c | 58 +
+ drivers/usb/host/mtk-phy.c | 102 ++
+ drivers/usb/host/mtk-phy.h | 179 ++
+ drivers/usb/host/pci-quirks.h | 2 +-
+ drivers/usb/host/xhci-dbg.c | 3 +
+ drivers/usb/host/xhci-mem.c | 11 +
+ drivers/usb/host/xhci-mtk-power.c | 115 ++
+ drivers/usb/host/xhci-mtk-power.h | 13 +
+ drivers/usb/host/xhci-mtk-scheduler.c | 608 +++++++
+ drivers/usb/host/xhci-mtk-scheduler.h | 77 +
+ drivers/usb/host/xhci-mtk.c | 265 +++
+ drivers/usb/host/xhci-mtk.h | 120 ++
+ drivers/usb/host/xhci-plat.c | 18 +
+ drivers/usb/host/xhci-ring.c | 109 +-
+ drivers/usb/host/xhci.c | 201 ++-
+ drivers/usb/host/xhci.h | 23 +-
+ 23 files changed, 5234 insertions(+), 13 deletions(-)
+ create mode 100644 drivers/usb/host/mtk-phy-7621.c
+ create mode 100644 drivers/usb/host/mtk-phy-7621.h
+ create mode 100644 drivers/usb/host/mtk-phy-ahb.c
+ create mode 100644 drivers/usb/host/mtk-phy.c
+ create mode 100644 drivers/usb/host/mtk-phy.h
+ create mode 100644 drivers/usb/host/xhci-mtk-power.c
+ create mode 100644 drivers/usb/host/xhci-mtk-power.h
+ create mode 100644 drivers/usb/host/xhci-mtk-scheduler.c
+ create mode 100644 drivers/usb/host/xhci-mtk-scheduler.h
+ create mode 100644 drivers/usb/host/xhci-mtk.c
+ create mode 100644 drivers/usb/host/xhci-mtk.h
+
+diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
+index d59d993..81bbb65 100644
+--- a/drivers/usb/core/hcd-pci.c
++++ b/drivers/usb/core/hcd-pci.c
+@@ -215,9 +215,13 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
+ goto disable_pci;
+ }
+
++
++#ifdef CONFIG_USB_MT7621_XHCI_PLATFORM
++ hcd->amd_resume_bug = 0;
++#else
+ hcd->amd_resume_bug = (usb_hcd_amd_remote_wakeup_quirk(dev) &&
+ driver->flags & (HCD_USB11 | HCD_USB3)) ? 1 : 0;
+-
++#endif
+ if (driver->flags & HCD_MEMORY) {
+ /* EHCI, OHCI */
+ hcd->rsrc_start = pci_resource_start(dev, 0);
+diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
+index 64ea219..c8cf5a6 100644
+--- a/drivers/usb/core/hub.c
++++ b/drivers/usb/core/hub.c
+@@ -1251,7 +1251,7 @@ static void hub_quiesce(struct usb_hub *hub, enum hub_quiescing_type type)
+ if (type != HUB_SUSPEND) {
+ /* Disconnect all the children */
+ for (i = 0; i < hdev->maxchild; ++i) {
+- if (hub->ports[i]->child)
++ if (hub->ports[i] && hub->ports[i]->child)
+ usb_disconnect(&hub->ports[i]->child);
+ }
+ }
+diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c
+index 51542f8..0b9e0b3 100644
+--- a/drivers/usb/core/port.c
++++ b/drivers/usb/core/port.c
+@@ -191,6 +191,7 @@ exit:
+ void usb_hub_remove_port_device(struct usb_hub *hub,
+ int port1)
+ {
+- device_unregister(&hub->ports[port1 - 1]->dev);
++ if (hub->ports[port1 - 1])
++ device_unregister(&hub->ports[port1 - 1]->dev);
+ }
+
+diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
+index a9707da..22aab121 100644
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -27,7 +27,13 @@ config USB_XHCI_HCD
+ if USB_XHCI_HCD
+
+ config USB_XHCI_PLATFORM
+- tristate
++ bool "xHCI platform"
++ depends on SOC_MT7621
++
++config USB_MT7621_XHCI_PLATFORM
++ bool "MTK MT7621 xHCI"
++ depends on USB_XHCI_PLATFORM
++ depends on SOC_MT7621
+
+ endif # USB_XHCI_HCD
+
+diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
+index 7530468..6614620 100644
+--- a/drivers/usb/host/Makefile
++++ b/drivers/usb/host/Makefile
+@@ -15,7 +15,13 @@ fhci-$(CONFIG_FHCI_DEBUG) += fhci-dbg.o
+ xhci-hcd-y := xhci.o xhci-mem.o
+ xhci-hcd-y += xhci-ring.o xhci-hub.o xhci-dbg.o
+ xhci-hcd-y += xhci-trace.o
++ifndef CONFIG_USB_MT7621_XHCI_PLATFORM
+ xhci-hcd-$(CONFIG_PCI) += xhci-pci.o
++endif
++
++ifdef CONFIG_USB_MT7621_XHCI_PLATFORM
++xhci-hcd-y += mtk-phy.o xhci-mtk-scheduler.o xhci-mtk-power.o xhci-mtk.o mtk-phy-7621.o mtk-phy-ahb.o
++endif
+
+ ifneq ($(CONFIG_USB_XHCI_PLATFORM), )
+ xhci-hcd-y += xhci-plat.o
+@@ -23,7 +29,9 @@ endif
+
+ obj-$(CONFIG_USB_WHCI_HCD) += whci/
+
++ifndef CONFIG_USB_MT7621_XHCI_PLATFORM
+ obj-$(CONFIG_PCI) += pci-quirks.o
++endif
+
+ obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
+ obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
+diff --git a/drivers/usb/host/mtk-phy-7621.c b/drivers/usb/host/mtk-phy-7621.c
+new file mode 100644
+index 0000000..4e9c0d7
+--- /dev/null
++++ b/drivers/usb/host/mtk-phy-7621.c
+@@ -0,0 +1,445 @@
++#include "mtk-phy.h"
++
++#ifdef CONFIG_PROJECT_7621
++#include "mtk-phy-7621.h"
++
++//not used on SoC
++PHY_INT32 phy_init(struct u3phy_info *info){
++ return PHY_TRUE;
++}
++
++//not used on SoC
++PHY_INT32 phy_change_pipe_phase(struct u3phy_info *info, PHY_INT32 phy_drv, PHY_INT32 pipe_phase){
++ return PHY_TRUE;
++}
++
++//--------------------------------------------------------
++// Function : fgEyeScanHelper_CheckPtInRegion()
++// Description : Check if the test point is in a rectangle region.
++// If it is in the rectangle, also check if this point
++// is on the multiple of deltaX and deltaY.
++// Parameter : strucScanRegion * prEye - the region
++// BYTE bX
++// BYTE bY
++// Return : BYTE - TRUE : This point needs to be tested
++// FALSE: This point will be omitted
++// Note : First check within the rectangle.
++// Secondly, use modulous to check if the point will be tested.
++//--------------------------------------------------------
++static PHY_INT8 fgEyeScanHelper_CheckPtInRegion(struct strucScanRegion * prEye, PHY_INT8 bX, PHY_INT8 bY)
++{
++ PHY_INT8 fgValid = true;
++
++
++ /// Be careful, the axis origin is on the TOP-LEFT corner.
++ /// Therefore the top-left point has the minimum X and Y
++ /// Botton-right point is the maximum X and Y
++ if ( (prEye->bX_tl <= bX) && (bX <= prEye->bX_br)
++ && (prEye->bY_tl <= bY) && (bY <= prEye->bX_br))
++ {
++ // With the region, now check whether or not the input test point is
++ // on the multiples of X and Y
++ // Do not have to worry about negative value, because we have already
++ // check the input bX, and bY is within the region.
++ if ( ((bX - prEye->bX_tl) % (prEye->bDeltaX))
++ || ((bY - prEye->bY_tl) % (prEye->bDeltaY)) )
++ {
++ // if the division will have remainder, that means
++ // the input test point is on the multiples of X and Y
++ fgValid = false;
++ }
++ else
++ {
++ }
++ }
++ else
++ {
++
++ fgValid = false;
++ }
++ return fgValid;
++}
++
++//--------------------------------------------------------
++// Function : EyeScanHelper_RunTest()
++// Description : Enable the test, and wait til it is completed
++// Parameter : None
++// Return : None
++// Note : None
++//--------------------------------------------------------
++static void EyeScanHelper_RunTest(struct u3phy_info *info)
++{
++ DRV_UDELAY(100);
++ // Disable the test
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++ , RG_SSUSB_EQ_EYE_CNT_EN_OFST, RG_SSUSB_EQ_EYE_CNT_EN, 0); //RG_SSUSB_RX_EYE_CNT_EN = 0
++ DRV_UDELAY(100);
++ // Run the test
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++ , RG_SSUSB_EQ_EYE_CNT_EN_OFST, RG_SSUSB_EQ_EYE_CNT_EN, 1); //RG_SSUSB_RX_EYE_CNT_EN = 1
++ DRV_UDELAY(100);
++ // Wait til it's done
++ //RGS_SSUSB_RX_EYE_CNT_RDY
++ while(!U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon5)
++ , RGS_SSUSB_EQ_EYE_CNT_RDY_OFST, RGS_SSUSB_EQ_EYE_CNT_RDY));
++}
++
++//--------------------------------------------------------
++// Function : fgEyeScanHelper_CalNextPoint()
++// Description : Calcualte the test point for the measurement
++// Parameter : None
++// Return : BOOL - TRUE : the next point is within the
++// boundaryof HW limit
++// FALSE: the next point is out of the HW limit
++// Note : The next point is obtained by calculating
++// from the bottom left of the region rectangle
++// and then scanning up until it reaches the upper
++// limit. At this time, the x will increment, and
++// start scanning downwards until the y hits the
++// zero.
++//--------------------------------------------------------
++static PHY_INT8 fgEyeScanHelper_CalNextPoint(void)
++{
++ if ( ((_bYcurr == MAX_Y) && (_eScanDir == SCAN_DN))
++ || ((_bYcurr == MIN_Y) && (_eScanDir == SCAN_UP))
++ )
++ {
++ /// Reaches the limit of Y axis
++ /// Increment X
++ _bXcurr++;
++ _fgXChged = true;
++ _eScanDir = (_eScanDir == SCAN_UP) ? SCAN_DN : SCAN_UP;
++
++ if (_bXcurr > MAX_X)
++ {
++ return false;
++ }
++ }
++ else
++ {
++ _bYcurr = (_eScanDir == SCAN_DN) ? _bYcurr + 1 : _bYcurr - 1;
++ _fgXChged = false;
++ }
++ return PHY_TRUE;
++}
++
++PHY_INT32 eyescan_init(struct u3phy_info *info){
++ //initial PHY setting
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phya_regs->rega)
++ , RG_SSUSB_CDR_EPEN_OFST, RG_SSUSB_CDR_EPEN, 1);
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->phyd_mix3)
++ , RG_SSUSB_FORCE_CDR_PI_PWD_OFST, RG_SSUSB_FORCE_CDR_PI_PWD, 1);
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
++ , RG_SSUSB_RX_PI_CAL_EN_SEL_OFST, RG_SSUSB_RX_PI_CAL_EN_SEL, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_SEL = 1
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
++ , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 1
++ return PHY_TRUE;
++}
++
++PHY_INT32 phy_eyescan(struct u3phy_info *info, PHY_INT32 x_t1, PHY_INT32 y_t1, PHY_INT32 x_br, PHY_INT32 y_br, PHY_INT32 delta_x, PHY_INT32 delta_y
++ , PHY_INT32 eye_cnt, PHY_INT32 num_cnt, PHY_INT32 PI_cal_en, PHY_INT32 num_ignore_cnt){
++ PHY_INT32 cOfst = 0;
++ PHY_UINT8 bIdxX = 0;
++ PHY_UINT8 bIdxY = 0;
++ //PHY_INT8 bCnt = 0;
++ PHY_UINT8 bIdxCycCnt = 0;
++ PHY_INT8 fgValid;
++ PHY_INT8 cX;
++ PHY_INT8 cY;
++ PHY_UINT8 bExtendCnt;
++ PHY_INT8 isContinue;
++ //PHY_INT8 isBreak;
++ PHY_UINT32 wErr0 = 0, wErr1 = 0;
++ //PHY_UINT32 temp;
++
++ PHY_UINT32 pwErrCnt0[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX];
++ PHY_UINT32 pwErrCnt1[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX];
++
++ _rEye1.bX_tl = x_t1;
++ _rEye1.bY_tl = y_t1;
++ _rEye1.bX_br = x_br;
++ _rEye1.bY_br = y_br;
++ _rEye1.bDeltaX = delta_x;
++ _rEye1.bDeltaY = delta_y;
++
++ _rEye2.bX_tl = x_t1;
++ _rEye2.bY_tl = y_t1;
++ _rEye2.bX_br = x_br;
++ _rEye2.bY_br = y_br;
++ _rEye2.bDeltaX = delta_x;
++ _rEye2.bDeltaY = delta_y;
++
++ _rTestCycle.wEyeCnt = eye_cnt;
++ _rTestCycle.bNumOfEyeCnt = num_cnt;
++ _rTestCycle.bNumOfIgnoreCnt = num_ignore_cnt;
++ _rTestCycle.bPICalEn = PI_cal_en;
++
++ _bXcurr = 0;
++ _bYcurr = 0;
++ _eScanDir = SCAN_DN;
++ _fgXChged = false;
++
++ printk("x_t1: %x, y_t1: %x, x_br: %x, y_br: %x, delta_x: %x, delta_y: %x, \
++ eye_cnt: %x, num_cnt: %x, PI_cal_en: %x, num_ignore_cnt: %x\n", \
++ x_t1, y_t1, x_br, y_br, delta_x, delta_y, eye_cnt, num_cnt, PI_cal_en, num_ignore_cnt);
++
++ //force SIGDET to OFF
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
++ , RG_SSUSB_RX_SIGDET_EN_SEL_OFST, RG_SSUSB_RX_SIGDET_EN_SEL, 1); //RG_SSUSB_RX_SIGDET_SEL = 1
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
++ , RG_SSUSB_RX_SIGDET_EN_OFST, RG_SSUSB_RX_SIGDET_EN, 0); //RG_SSUSB_RX_SIGDET_EN = 0
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye1)
++ , RG_SSUSB_EQ_SIGDET_OFST, RG_SSUSB_EQ_SIGDET, 0); //RG_SSUSB_RX_SIGDET = 0
++
++ // RX_TRI_DET_EN to Disable
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq3)
++ , RG_SSUSB_EQ_TRI_DET_EN_OFST, RG_SSUSB_EQ_TRI_DET_EN, 0); //RG_SSUSB_RX_TRI_DET_EN = 0
++
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++ , RG_SSUSB_EQ_EYE_MON_EN_OFST, RG_SSUSB_EQ_EYE_MON_EN, 1); //RG_SSUSB_EYE_MON_EN = 1
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++ , RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, 0); //RG_SSUSB_RX_EYE_XOFFSET = 0
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++ , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, 0); //RG_SSUSB_RX_EYE0_Y = 0
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++ , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, 0); //RG_SSUSB_RX_EYE1_Y = 0
++
++
++ if (PI_cal_en){
++ // PI Calibration
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
++ , RG_SSUSB_RX_PI_CAL_EN_SEL_OFST, RG_SSUSB_RX_PI_CAL_EN_SEL, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_SEL = 1
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
++ , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 0); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 0
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
++ , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 1
++
++ DRV_UDELAY(20);
++
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
++ , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 0); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 0
++ _bPIResult = U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon5)
++ , RGS_SSUSB_EQ_PILPO_OFST, RGS_SSUSB_EQ_PILPO); //read RGS_SSUSB_RX_PILPO
++
++ printk(KERN_ERR "PI result: %d\n", _bPIResult);
++ }
++ // Read Initial DAC
++ // Set CYCLE
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye3)
++ ,RG_SSUSB_EQ_EYE_CNT_OFST, RG_SSUSB_EQ_EYE_CNT, eye_cnt); //RG_SSUSB_RX_EYE_CNT
++
++ // Eye Monitor Feature
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye1)
++ , RG_SSUSB_EQ_EYE_MASK_OFST, RG_SSUSB_EQ_EYE_MASK, 0x3ff); //RG_SSUSB_RX_EYE_MASK = 0x3ff
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++ , RG_SSUSB_EQ_EYE_MON_EN_OFST, RG_SSUSB_EQ_EYE_MON_EN, 1); //RG_SSUSB_EYE_MON_EN = 1
++
++ // Move X,Y to the top-left corner
++ for (cOfst = 0; cOfst >= -64; cOfst--)
++ {
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++ ,RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, cOfst); //RG_SSUSB_RX_EYE_XOFFSET
++ }
++ for (cOfst = 0; cOfst < 64; cOfst++)
++ {
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++ , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, cOfst); //RG_SSUSB_RX_EYE0_Y
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++ , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, cOfst); //RG_SSUSB_RX_EYE1_Y
++ }
++ //ClearErrorResult
++ for(bIdxCycCnt = 0; bIdxCycCnt < CYCLE_COUNT_MAX; bIdxCycCnt++){
++ for(bIdxX = 0; bIdxX < ERRCNT_MAX; bIdxX++)
++ {
++ for(bIdxY = 0; bIdxY < ERRCNT_MAX; bIdxY++){
++ pwErrCnt0[bIdxCycCnt][bIdxX][bIdxY] = 0;
++ pwErrCnt1[bIdxCycCnt][bIdxX][bIdxY] = 0;
++ }
++ }
++ }
++ isContinue = true;
++ while(isContinue){
++ //printk(KERN_ERR "_bXcurr: %d, _bYcurr: %d\n", _bXcurr, _bYcurr);
++ // The point is within the boundary, then let's check if it is within
++ // the testing region.
++ // The point is only test-able if one of the eye region
++ // includes this point.
++ fgValid = fgEyeScanHelper_CheckPtInRegion(&_rEye1, _bXcurr, _bYcurr)
++ || fgEyeScanHelper_CheckPtInRegion(&_rEye2, _bXcurr, _bYcurr);
++ // Translate bX and bY to 2's complement from where the origin was on the
++ // top left corner.
++ // 0x40 and 0x3F needs a bit of thinking!!!! >"<
++ cX = (_bXcurr ^ 0x40);
++ cY = (_bYcurr ^ 0x3F);
++
++ // Set X if necessary
++ if (_fgXChged == true)
++ {
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++ , RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, cX); //RG_SSUSB_RX_EYE_XOFFSET
++ }
++ // Set Y
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++ , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, cY); //RG_SSUSB_RX_EYE0_Y
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++ , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, cY); //RG_SSUSB_RX_EYE1_Y
++
++ /// Test this point!
++ if (fgValid){
++ for (bExtendCnt = 0; bExtendCnt < num_ignore_cnt; bExtendCnt++)
++ {
++ //run test
++ EyeScanHelper_RunTest(info);
++ }
++ for (bExtendCnt = 0; bExtendCnt < num_cnt; bExtendCnt++)
++ {
++ EyeScanHelper_RunTest(info);
++ wErr0 = U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon3)
++ , RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0_OFST, RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0);
++ wErr1 = U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon4)
++ , RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1_OFST, RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1);
++
++ pwErrCnt0[bExtendCnt][_bXcurr][_bYcurr] = wErr0;
++ pwErrCnt1[bExtendCnt][_bXcurr][_bYcurr] = wErr1;
++
++ //EyeScanHelper_GetResult(&_rRes.pwErrCnt0[bCnt], &_rRes.pwErrCnt1[bCnt]);
++// printk(KERN_ERR "cnt[%d] cur_x,y [0x%x][0x%x], cX,cY [0x%x][0x%x], ErrCnt[%d][%d]\n"
++// , bExtendCnt, _bXcurr, _bYcurr, cX, cY, pwErrCnt0[bExtendCnt][_bXcurr][_bYcurr], pwErrCnt1[bExtendCnt][_bXcurr][_bYcurr]);
++ }
++ //printk(KERN_ERR "cur_x,y [0x%x][0x%x], cX,cY [0x%x][0x%x], ErrCnt[%d][%d]\n", _bXcurr, _bYcurr, cX, cY, pwErrCnt0[0][_bXcurr][_bYcurr], pwErrCnt1[0][_bXcurr][_bYcurr]);
++ }
++ else{
++
++ }
++ if (fgEyeScanHelper_CalNextPoint() == false){
++#if 0
++ printk(KERN_ERR "Xcurr [0x%x] Ycurr [0x%x]\n", _bXcurr, _bYcurr);
++ printk(KERN_ERR "XcurrREG [0x%x] YcurrREG [0x%x]\n", cX, cY);
++#endif
++ printk(KERN_ERR "end of eye scan\n");
++ isContinue = false;
++ }
++ }
++ printk(KERN_ERR "CurX [0x%x] CurY [0x%x]\n"
++ , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET)
++ , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y));
++
++ // Move X,Y to the top-left corner
++ for (cOfst = 63; cOfst >= 0; cOfst--)
++ {
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++ , RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, cOfst); //RG_SSUSB_RX_EYE_XOFFSET
++ }
++ for (cOfst = 63; cOfst >= 0; cOfst--)
++ {
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++ , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, cOfst);
++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++ , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, cOfst);
++
++ }
++ printk(KERN_ERR "CurX [0x%x] CurY [0x%x]\n"
++ , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET)
++ , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y));
++
++ printk(KERN_ERR "PI result: %d\n", _bPIResult);
++ printk(KERN_ERR "pwErrCnt0 addr: 0x%x\n", (PHY_UINT32)pwErrCnt0);
++ printk(KERN_ERR "pwErrCnt1 addr: 0x%x\n", (PHY_UINT32)pwErrCnt1);
++
++ return PHY_TRUE;
++}
++
++//not used on SoC
++PHY_INT32 u2_save_cur_en(struct u3phy_info *info){
++ return PHY_TRUE;
++}
++
++//not used on SoC
++PHY_INT32 u2_save_cur_re(struct u3phy_info *info){
++ return PHY_TRUE;
++}
++
++PHY_INT32 u2_slew_rate_calibration(struct u3phy_info *info){
++ PHY_INT32 i=0;
++ //PHY_INT32 j=0;
++ //PHY_INT8 u1SrCalVal = 0;
++ //PHY_INT8 u1Reg_addr_HSTX_SRCAL_EN;
++ PHY_INT32 fgRet = 0;
++ PHY_INT32 u4FmOut = 0;
++ PHY_INT32 u4Tmp = 0;
++ //PHY_INT32 temp;
++
++ // => RG_USB20_HSTX_SRCAL_EN = 1
++ // enable HS TX SR calibration
++ U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0)
++ , RG_USB20_HSTX_SRCAL_EN_OFST, RG_USB20_HSTX_SRCAL_EN, 0x1);
++ DRV_MSLEEP(1);
++
++ // => RG_FRCK_EN = 1
++ // Enable free run clock
++ U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmmonr1)
++ , RG_FRCK_EN_OFST, RG_FRCK_EN, 1);
++
++ // MT6290 HS signal quality patch
++ // => RG_CYCLECNT = 400
++ // Setting cyclecnt =400
++ U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmcr0)
++ , RG_CYCLECNT_OFST, RG_CYCLECNT, 0x400);
++
++ // => RG_FREQDET_EN = 1
++ // Enable frequency meter
++ U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmcr0)
++ , RG_FREQDET_EN_OFST, RG_FREQDET_EN, 0x1);
++
++ // wait for FM detection done, set 10ms timeout
++ for(i=0; i<10; i++){
++ // => u4FmOut = USB_FM_OUT
++ // read FM_OUT
++ u4FmOut = U3PhyReadReg32(((PHY_UINT32)&info->sifslv_fm_regs->fmmonr0));
++ printk("FM_OUT value: u4FmOut = %d(0x%08X)\n", u4FmOut, u4FmOut);
++
++ // check if FM detection done
++ if (u4FmOut != 0)
++ {
++ fgRet = 0;
++ printk("FM detection done! loop = %d\n", i);
++
++ break;
++ }
++
++ fgRet = 1;
++ DRV_MSLEEP(1);
++ }
++ // => RG_FREQDET_EN = 0
++ // disable frequency meter
++ U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmcr0)
++ , RG_FREQDET_EN_OFST, RG_FREQDET_EN, 0);
++
++ // => RG_FRCK_EN = 0
++ // disable free run clock
++ U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmmonr1)
++ , RG_FRCK_EN_OFST, RG_FRCK_EN, 0);
++
++ // => RG_USB20_HSTX_SRCAL_EN = 0
++ // disable HS TX SR calibration
++ U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0)
++ , RG_USB20_HSTX_SRCAL_EN_OFST, RG_USB20_HSTX_SRCAL_EN, 0);
++ DRV_MSLEEP(1);
++
++ if(u4FmOut == 0){
++ U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0)
++ , RG_USB20_HSTX_SRCTRL_OFST, RG_USB20_HSTX_SRCTRL, 0x4);
++
++ fgRet = 1;
++ }
++ else{
++ // set reg = (1024/FM_OUT) * 25 * 0.028 (round to the nearest digits)
++ u4Tmp = (((1024 * 25 * U2_SR_COEF_7621) / u4FmOut) + 500) / 1000;
++ printk("SR calibration value u1SrCalVal = %d\n", (PHY_UINT8)u4Tmp);
++ U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0)
++ , RG_USB20_HSTX_SRCTRL_OFST, RG_USB20_HSTX_SRCTRL, u4Tmp);
++ }
++ return fgRet;
++}
++
++#endif
+diff --git a/drivers/usb/host/mtk-phy-7621.h b/drivers/usb/host/mtk-phy-7621.h
+new file mode 100644
+index 0000000..41b0c77
+--- /dev/null
++++ b/drivers/usb/host/mtk-phy-7621.h
+@@ -0,0 +1,2871 @@
++#ifdef CONFIG_PROJECT_7621
++#ifndef __MTK_PHY_7621_H
++#define __MTK_PHY_7621_H
++
++#define U2_SR_COEF_7621 28
++
++///////////////////////////////////////////////////////////////////////////////
++
++struct u2phy_reg {
++ //0x0
++ PHY_LE32 u2phyac0;
++ PHY_LE32 u2phyac1;
++ PHY_LE32 u2phyac2;
++ PHY_LE32 reserve0;
++ //0x10
++ PHY_LE32 u2phyacr0;
++ PHY_LE32 u2phyacr1;
++ PHY_LE32 u2phyacr2;
++ PHY_LE32 u2phyacr3;
++ //0x20
++ PHY_LE32 u2phyacr4;
++ PHY_LE32 u2phyamon0;
++ PHY_LE32 reserve1[2];
++ //0x30~0x50
++ PHY_LE32 reserve2[12];
++ //0x60
++ PHY_LE32 u2phydcr0;
++ PHY_LE32 u2phydcr1;
++ PHY_LE32 u2phydtm0;
++ PHY_LE32 u2phydtm1;
++ //0x70
++ PHY_LE32 u2phydmon0;
++ PHY_LE32 u2phydmon1;
++ PHY_LE32 u2phydmon2;
++ PHY_LE32 u2phydmon3;
++ //0x80
++ PHY_LE32 u2phybc12c;
++ PHY_LE32 u2phybc12c1;
++ PHY_LE32 reserve3[2];
++ //0x90~0xe0
++ PHY_LE32 reserve4[24];
++ //0xf0
++ PHY_LE32 reserve6[3];
++ PHY_LE32 regfcom;
++};
++
++//U3D_U2PHYAC0
++#define RG_USB20_USBPLL_DIVEN (0x7<<28) //30:28
++#define RG_USB20_USBPLL_CKCTRL (0x3<<26) //27:26
++#define RG_USB20_USBPLL_PREDIV (0x3<<24) //25:24
++#define RG_USB20_USBPLL_FORCE_ON (0x1<<23) //23:23
++#define RG_USB20_USBPLL_FBDIV (0x7f<<16) //22:16
++#define RG_USB20_REF_EN (0x1<<15) //15:15
++#define RG_USB20_INTR_EN (0x1<<14) //14:14
++#define RG_USB20_BG_TRIM (0xf<<8) //11:8
++#define RG_USB20_BG_RBSEL (0x3<<6) //7:6
++#define RG_USB20_BG_RASEL (0x3<<4) //5:4
++#define RG_USB20_BGR_DIV (0x3<<2) //3:2
++#define RG_SIFSLV_CHP_EN (0x1<<1) //1:1
++#define RG_SIFSLV_BGR_EN (0x1<<0) //0:0
++
++//U3D_U2PHYAC1
++#define RG_USB20_VRT_VREF_SEL (0x7<<28) //30:28
++#define RG_USB20_TERM_VREF_SEL (0x7<<24) //26:24
++#define RG_USB20_MPX_SEL (0xff<<16) //23:16
++#define RG_USB20_MPX_OUT_SEL (0x3<<12) //13:12
++#define RG_USB20_TX_PH_ROT_SEL (0x7<<8) //10:8
++#define RG_USB20_USBPLL_ACCEN (0x1<<3) //3:3
++#define RG_USB20_USBPLL_LF (0x1<<2) //2:2
++#define RG_USB20_USBPLL_BR (0x1<<1) //1:1
++#define RG_USB20_USBPLL_BP (0x1<<0) //0:0
++
++//U3D_U2PHYAC2
++#define RG_SIFSLV_MAC_BANDGAP_EN (0x1<<17) //17:17
++#define RG_SIFSLV_MAC_CHOPPER_EN (0x1<<16) //16:16
++#define RG_USB20_CLKREF_REV (0xff<<0) //7:0
++
++//U3D_U2PHYACR0
++#define RG_USB20_ICUSB_EN (0x1<<24) //24:24
++#define RG_USB20_HSTX_SRCAL_EN (0x1<<23) //23:23
++#define RG_USB20_HSTX_SRCTRL (0x7<<16) //18:16
++#define RG_USB20_LS_CR (0x7<<12) //14:12
++#define RG_USB20_FS_CR (0x7<<8) //10:8
++#define RG_USB20_LS_SR (0x7<<4) //6:4
++#define RG_USB20_FS_SR (0x7<<0) //2:0
++
++//U3D_U2PHYACR1
++#define RG_USB20_INIT_SQ_EN_DG (0x3<<28) //29:28
++#define RG_USB20_SQD (0x3<<24) //25:24
++#define RG_USB20_HSTX_TMODE_SEL (0x3<<20) //21:20
++#define RG_USB20_HSTX_TMODE_EN (0x1<<19) //19:19
++#define RG_USB20_PHYD_MONEN (0x1<<18) //18:18
++#define RG_USB20_INLPBK_EN (0x1<<17) //17:17
++#define RG_USB20_CHIRP_EN (0x1<<16) //16:16
++#define RG_USB20_DM_ABIST_SOURCE_EN (0x1<<15) //15:15
++#define RG_USB20_DM_ABIST_SELE (0xf<<8) //11:8
++#define RG_USB20_DP_ABIST_SOURCE_EN (0x1<<7) //7:7
++#define RG_USB20_DP_ABIST_SELE (0xf<<0) //3:0
++
++//U3D_U2PHYACR2
++#define RG_USB20_OTG_ABIST_SELE (0x7<<29) //31:29
++#define RG_USB20_OTG_ABIST_EN (0x1<<28) //28:28
++#define RG_USB20_OTG_VBUSCMP_EN (0x1<<27) //27:27
++#define RG_USB20_OTG_VBUSTH (0x7<<24) //26:24
++#define RG_USB20_DISC_FIT_EN (0x1<<22) //22:22
++#define RG_USB20_DISCD (0x3<<20) //21:20
++#define RG_USB20_DISCTH (0xf<<16) //19:16
++#define RG_USB20_SQCAL_EN (0x1<<15) //15:15
++#define RG_USB20_SQCAL (0xf<<8) //11:8
++#define RG_USB20_SQTH (0xf<<0) //3:0
++
++//U3D_U2PHYACR3
++#define RG_USB20_HSTX_DBIST (0xf<<28) //31:28
++#define RG_USB20_HSTX_BIST_EN (0x1<<26) //26:26
++#define RG_USB20_HSTX_I_EN_MODE (0x3<<24) //25:24
++#define RG_USB20_HSRX_TMODE_EN (0x1<<23) //23:23
++#define RG_USB20_HSRX_BIAS_EN_SEL (0x3<<20) //21:20
++#define RG_USB20_USB11_TMODE_EN (0x1<<19) //19:19
++#define RG_USB20_TMODE_FS_LS_TX_EN (0x1<<18) //18:18
++#define RG_USB20_TMODE_FS_LS_RCV_EN (0x1<<17) //17:17
++#define RG_USB20_TMODE_FS_LS_MODE (0x1<<16) //16:16
++#define RG_USB20_HS_TERM_EN_MODE (0x3<<13) //14:13
++#define RG_USB20_PUPD_BIST_EN (0x1<<12) //12:12
++#define RG_USB20_EN_PU_DM (0x1<<11) //11:11
++#define RG_USB20_EN_PD_DM (0x1<<10) //10:10
++#define RG_USB20_EN_PU_DP (0x1<<9) //9:9
++#define RG_USB20_EN_PD_DP (0x1<<8) //8:8
++#define RG_USB20_PHY_REV (0xff<<0) //7:0
++
++//U3D_U2PHYACR4
++#define RG_USB20_DP_100K_MODE (0x1<<18) //18:18
++#define RG_USB20_DM_100K_EN (0x1<<17) //17:17
++#define USB20_DP_100K_EN (0x1<<16) //16:16
++#define USB20_GPIO_DM_I (0x1<<15) //15:15
++#define USB20_GPIO_DP_I (0x1<<14) //14:14
++#define USB20_GPIO_DM_OE (0x1<<13) //13:13
++#define USB20_GPIO_DP_OE (0x1<<12) //12:12
++#define RG_USB20_GPIO_CTL (0x1<<9) //9:9
++#define USB20_GPIO_MODE (0x1<<8) //8:8
++#define RG_USB20_TX_BIAS_EN (0x1<<5) //5:5
++#define RG_USB20_TX_VCMPDN_EN (0x1<<4) //4:4
++#define RG_USB20_HS_SQ_EN_MODE (0x3<<2) //3:2
++#define RG_USB20_HS_RCV_EN_MODE (0x3<<0) //1:0
++
++//U3D_U2PHYAMON0
++#define RGO_USB20_GPIO_DM_O (0x1<<1) //1:1
++#define RGO_USB20_GPIO_DP_O (0x1<<0) //0:0
++
++//U3D_U2PHYDCR0
++#define RG_USB20_CDR_TST (0x3<<30) //31:30
++#define RG_USB20_GATED_ENB (0x1<<29) //29:29
++#define RG_USB20_TESTMODE (0x3<<26) //27:26
++#define RG_USB20_PLL_STABLE (0x1<<25) //25:25
++#define RG_USB20_PLL_FORCE_ON (0x1<<24) //24:24
++#define RG_USB20_PHYD_RESERVE (0xffff<<8) //23:8
++#define RG_USB20_EBTHRLD (0x1<<7) //7:7
++#define RG_USB20_EARLY_HSTX_I (0x1<<6) //6:6
++#define RG_USB20_TX_TST (0x1<<5) //5:5
++#define RG_USB20_NEGEDGE_ENB (0x1<<4) //4:4
++#define RG_USB20_CDR_FILT (0xf<<0) //3:0
++
++//U3D_U2PHYDCR1
++#define RG_USB20_PROBE_SEL (0xff<<24) //31:24
++#define RG_USB20_DRVVBUS (0x1<<23) //23:23
++#define RG_DEBUG_EN (0x1<<22) //22:22
++#define RG_USB20_OTG_PROBE (0x3<<20) //21:20
++#define RG_USB20_SW_PLLMODE (0x3<<18) //19:18
++#define RG_USB20_BERTH (0x3<<16) //17:16
++#define RG_USB20_LBMODE (0x3<<13) //14:13
++#define RG_USB20_FORCE_TAP (0x1<<12) //12:12
++#define RG_USB20_TAPSEL (0xfff<<0) //11:0
++
++//U3D_U2PHYDTM0
++#define RG_UART_MODE (0x3<<30) //31:30
++#define FORCE_UART_I (0x1<<29) //29:29
++#define FORCE_UART_BIAS_EN (0x1<<28) //28:28
++#define FORCE_UART_TX_OE (0x1<<27) //27:27
++#define FORCE_UART_EN (0x1<<26) //26:26
++#define FORCE_USB_CLKEN (0x1<<25) //25:25
++#define FORCE_DRVVBUS (0x1<<24) //24:24
++#define FORCE_DATAIN (0x1<<23) //23:23
++#define FORCE_TXVALID (0x1<<22) //22:22
++#define FORCE_DM_PULLDOWN (0x1<<21) //21:21
++#define FORCE_DP_PULLDOWN (0x1<<20) //20:20
++#define FORCE_XCVRSEL (0x1<<19) //19:19
++#define FORCE_SUSPENDM (0x1<<18) //18:18
++#define FORCE_TERMSEL (0x1<<17) //17:17
++#define FORCE_OPMODE (0x1<<16) //16:16
++#define UTMI_MUXSEL (0x1<<15) //15:15
++#define RG_RESET (0x1<<14) //14:14
++#define RG_DATAIN (0xf<<10) //13:10
++#define RG_TXVALIDH (0x1<<9) //9:9
++#define RG_TXVALID (0x1<<8) //8:8
++#define RG_DMPULLDOWN (0x1<<7) //7:7
++#define RG_DPPULLDOWN (0x1<<6) //6:6
++#define RG_XCVRSEL (0x3<<4) //5:4
++#define RG_SUSPENDM (0x1<<3) //3:3
++#define RG_TERMSEL (0x1<<2) //2:2
++#define RG_OPMODE (0x3<<0) //1:0
++
++//U3D_U2PHYDTM1
++#define RG_USB20_PRBS7_EN (0x1<<31) //31:31
++#define RG_USB20_PRBS7_BITCNT (0x3f<<24) //29:24
++#define RG_USB20_CLK48M_EN (0x1<<23) //23:23
++#define RG_USB20_CLK60M_EN (0x1<<22) //22:22
++#define RG_UART_I (0x1<<19) //19:19
++#define RG_UART_BIAS_EN (0x1<<18) //18:18
++#define RG_UART_TX_OE (0x1<<17) //17:17
++#define RG_UART_EN (0x1<<16) //16:16
++#define FORCE_VBUSVALID (0x1<<13) //13:13
++#define FORCE_SESSEND (0x1<<12) //12:12
++#define FORCE_BVALID (0x1<<11) //11:11
++#define FORCE_AVALID (0x1<<10) //10:10
++#define FORCE_IDDIG (0x1<<9) //9:9
++#define FORCE_IDPULLUP (0x1<<8) //8:8
++#define RG_VBUSVALID (0x1<<5) //5:5
++#define RG_SESSEND (0x1<<4) //4:4
++#define RG_BVALID (0x1<<3) //3:3
++#define RG_AVALID (0x1<<2) //2:2
++#define RG_IDDIG (0x1<<1) //1:1
++#define RG_IDPULLUP (0x1<<0) //0:0
++
++//U3D_U2PHYDMON0
++#define RG_USB20_PRBS7_BERTH (0xff<<0) //7:0
++
++//U3D_U2PHYDMON1
++#define USB20_UART_O (0x1<<31) //31:31
++#define RGO_USB20_LB_PASS (0x1<<30) //30:30
++#define RGO_USB20_LB_DONE (0x1<<29) //29:29
++#define AD_USB20_BVALID (0x1<<28) //28:28
++#define USB20_IDDIG (0x1<<27) //27:27
++#define AD_USB20_VBUSVALID (0x1<<26) //26:26
++#define AD_USB20_SESSEND (0x1<<25) //25:25
++#define AD_USB20_AVALID (0x1<<24) //24:24
++#define USB20_LINE_STATE (0x3<<22) //23:22
++#define USB20_HST_DISCON (0x1<<21) //21:21
++#define USB20_TX_READY (0x1<<20) //20:20
++#define USB20_RX_ERROR (0x1<<19) //19:19
++#define USB20_RX_ACTIVE (0x1<<18) //18:18
++#define USB20_RX_VALIDH (0x1<<17) //17:17
++#define USB20_RX_VALID (0x1<<16) //16:16
++#define USB20_DATA_OUT (0xffff<<0) //15:0
++
++//U3D_U2PHYDMON2
++#define RGO_TXVALID_CNT (0xff<<24) //31:24
++#define RGO_RXACTIVE_CNT (0xff<<16) //23:16
++#define RGO_USB20_LB_BERCNT (0xff<<8) //15:8
++#define USB20_PROBE_OUT (0xff<<0) //7:0
++
++//U3D_U2PHYDMON3
++#define RGO_USB20_PRBS7_ERRCNT (0xffff<<16) //31:16
++#define RGO_USB20_PRBS7_DONE (0x1<<3) //3:3
++#define RGO_USB20_PRBS7_LOCK (0x1<<2) //2:2
++#define RGO_USB20_PRBS7_PASS (0x1<<1) //1:1
++#define RGO_USB20_PRBS7_PASSTH (0x1<<0) //0:0
++
++//U3D_U2PHYBC12C
++#define RG_SIFSLV_CHGDT_DEGLCH_CNT (0xf<<28) //31:28
++#define RG_SIFSLV_CHGDT_CTRL_CNT (0xf<<24) //27:24
++#define RG_SIFSLV_CHGDT_FORCE_MODE (0x1<<16) //16:16
++#define RG_CHGDT_ISRC_LEV (0x3<<14) //15:14
++#define RG_CHGDT_VDATSRC (0x1<<13) //13:13
++#define RG_CHGDT_BGVREF_SEL (0x7<<10) //12:10
++#define RG_CHGDT_RDVREF_SEL (0x3<<8) //9:8
++#define RG_CHGDT_ISRC_DP (0x1<<7) //7:7
++#define RG_SIFSLV_CHGDT_OPOUT_DM (0x1<<6) //6:6
++#define RG_CHGDT_VDAT_DM (0x1<<5) //5:5
++#define RG_CHGDT_OPOUT_DP (0x1<<4) //4:4
++#define RG_SIFSLV_CHGDT_VDAT_DP (0x1<<3) //3:3
++#define RG_SIFSLV_CHGDT_COMP_EN (0x1<<2) //2:2
++#define RG_SIFSLV_CHGDT_OPDRV_EN (0x1<<1) //1:1
++#define RG_CHGDT_EN (0x1<<0) //0:0
++
++//U3D_U2PHYBC12C1
++#define RG_CHGDT_REV (0xff<<0) //7:0
++
++//U3D_REGFCOM
++#define RG_PAGE (0xff<<24) //31:24
++#define I2C_MODE (0x1<<16) //16:16
++
++
++/* OFFSET */
++
++//U3D_U2PHYAC0
++#define RG_USB20_USBPLL_DIVEN_OFST (28)
++#define RG_USB20_USBPLL_CKCTRL_OFST (26)
++#define RG_USB20_USBPLL_PREDIV_OFST (24)
++#define RG_USB20_USBPLL_FORCE_ON_OFST (23)
++#define RG_USB20_USBPLL_FBDIV_OFST (16)
++#define RG_USB20_REF_EN_OFST (15)
++#define RG_USB20_INTR_EN_OFST (14)
++#define RG_USB20_BG_TRIM_OFST (8)
++#define RG_USB20_BG_RBSEL_OFST (6)
++#define RG_USB20_BG_RASEL_OFST (4)
++#define RG_USB20_BGR_DIV_OFST (2)
++#define RG_SIFSLV_CHP_EN_OFST (1)
++#define RG_SIFSLV_BGR_EN_OFST (0)
++
++//U3D_U2PHYAC1
++#define RG_USB20_VRT_VREF_SEL_OFST (28)
++#define RG_USB20_TERM_VREF_SEL_OFST (24)
++#define RG_USB20_MPX_SEL_OFST (16)
++#define RG_USB20_MPX_OUT_SEL_OFST (12)
++#define RG_USB20_TX_PH_ROT_SEL_OFST (8)
++#define RG_USB20_USBPLL_ACCEN_OFST (3)
++#define RG_USB20_USBPLL_LF_OFST (2)
++#define RG_USB20_USBPLL_BR_OFST (1)
++#define RG_USB20_USBPLL_BP_OFST (0)
++
++//U3D_U2PHYAC2
++#define RG_SIFSLV_MAC_BANDGAP_EN_OFST (17)
++#define RG_SIFSLV_MAC_CHOPPER_EN_OFST (16)
++#define RG_USB20_CLKREF_REV_OFST (0)
++
++//U3D_U2PHYACR0
++#define RG_USB20_ICUSB_EN_OFST (24)
++#define RG_USB20_HSTX_SRCAL_EN_OFST (23)
++#define RG_USB20_HSTX_SRCTRL_OFST (16)
++#define RG_USB20_LS_CR_OFST (12)
++#define RG_USB20_FS_CR_OFST (8)
++#define RG_USB20_LS_SR_OFST (4)
++#define RG_USB20_FS_SR_OFST (0)
++
++//U3D_U2PHYACR1
++#define RG_USB20_INIT_SQ_EN_DG_OFST (28)
++#define RG_USB20_SQD_OFST (24)
++#define RG_USB20_HSTX_TMODE_SEL_OFST (20)
++#define RG_USB20_HSTX_TMODE_EN_OFST (19)
++#define RG_USB20_PHYD_MONEN_OFST (18)
++#define RG_USB20_INLPBK_EN_OFST (17)
++#define RG_USB20_CHIRP_EN_OFST (16)
++#define RG_USB20_DM_ABIST_SOURCE_EN_OFST (15)
++#define RG_USB20_DM_ABIST_SELE_OFST (8)
++#define RG_USB20_DP_ABIST_SOURCE_EN_OFST (7)
++#define RG_USB20_DP_ABIST_SELE_OFST (0)
++
++//U3D_U2PHYACR2
++#define RG_USB20_OTG_ABIST_SELE_OFST (29)
++#define RG_USB20_OTG_ABIST_EN_OFST (28)
++#define RG_USB20_OTG_VBUSCMP_EN_OFST (27)
++#define RG_USB20_OTG_VBUSTH_OFST (24)
++#define RG_USB20_DISC_FIT_EN_OFST (22)
++#define RG_USB20_DISCD_OFST (20)
++#define RG_USB20_DISCTH_OFST (16)
++#define RG_USB20_SQCAL_EN_OFST (15)
++#define RG_USB20_SQCAL_OFST (8)
++#define RG_USB20_SQTH_OFST (0)
++
++//U3D_U2PHYACR3
++#define RG_USB20_HSTX_DBIST_OFST (28)
++#define RG_USB20_HSTX_BIST_EN_OFST (26)
++#define RG_USB20_HSTX_I_EN_MODE_OFST (24)
++#define RG_USB20_HSRX_TMODE_EN_OFST (23)
++#define RG_USB20_HSRX_BIAS_EN_SEL_OFST (20)
++#define RG_USB20_USB11_TMODE_EN_OFST (19)
++#define RG_USB20_TMODE_FS_LS_TX_EN_OFST (18)
++#define RG_USB20_TMODE_FS_LS_RCV_EN_OFST (17)
++#define RG_USB20_TMODE_FS_LS_MODE_OFST (16)
++#define RG_USB20_HS_TERM_EN_MODE_OFST (13)
++#define RG_USB20_PUPD_BIST_EN_OFST (12)
++#define RG_USB20_EN_PU_DM_OFST (11)
++#define RG_USB20_EN_PD_DM_OFST (10)
++#define RG_USB20_EN_PU_DP_OFST (9)
++#define RG_USB20_EN_PD_DP_OFST (8)
++#define RG_USB20_PHY_REV_OFST (0)
++
++//U3D_U2PHYACR4
++#define RG_USB20_DP_100K_MODE_OFST (18)
++#define RG_USB20_DM_100K_EN_OFST (17)
++#define USB20_DP_100K_EN_OFST (16)
++#define USB20_GPIO_DM_I_OFST (15)
++#define USB20_GPIO_DP_I_OFST (14)
++#define USB20_GPIO_DM_OE_OFST (13)
++#define USB20_GPIO_DP_OE_OFST (12)
++#define RG_USB20_GPIO_CTL_OFST (9)
++#define USB20_GPIO_MODE_OFST (8)
++#define RG_USB20_TX_BIAS_EN_OFST (5)
++#define RG_USB20_TX_VCMPDN_EN_OFST (4)
++#define RG_USB20_HS_SQ_EN_MODE_OFST (2)
++#define RG_USB20_HS_RCV_EN_MODE_OFST (0)
++
++//U3D_U2PHYAMON0
++#define RGO_USB20_GPIO_DM_O_OFST (1)
++#define RGO_USB20_GPIO_DP_O_OFST (0)
++
++//U3D_U2PHYDCR0
++#define RG_USB20_CDR_TST_OFST (30)
++#define RG_USB20_GATED_ENB_OFST (29)
++#define RG_USB20_TESTMODE_OFST (26)
++#define RG_USB20_PLL_STABLE_OFST (25)
++#define RG_USB20_PLL_FORCE_ON_OFST (24)
++#define RG_USB20_PHYD_RESERVE_OFST (8)
++#define RG_USB20_EBTHRLD_OFST (7)
++#define RG_USB20_EARLY_HSTX_I_OFST (6)
++#define RG_USB20_TX_TST_OFST (5)
++#define RG_USB20_NEGEDGE_ENB_OFST (4)
++#define RG_USB20_CDR_FILT_OFST (0)
++
++//U3D_U2PHYDCR1
++#define RG_USB20_PROBE_SEL_OFST (24)
++#define RG_USB20_DRVVBUS_OFST (23)
++#define RG_DEBUG_EN_OFST (22)
++#define RG_USB20_OTG_PROBE_OFST (20)
++#define RG_USB20_SW_PLLMODE_OFST (18)
++#define RG_USB20_BERTH_OFST (16)
++#define RG_USB20_LBMODE_OFST (13)
++#define RG_USB20_FORCE_TAP_OFST (12)
++#define RG_USB20_TAPSEL_OFST (0)
++
++//U3D_U2PHYDTM0
++#define RG_UART_MODE_OFST (30)
++#define FORCE_UART_I_OFST (29)
++#define FORCE_UART_BIAS_EN_OFST (28)
++#define FORCE_UART_TX_OE_OFST (27)
++#define FORCE_UART_EN_OFST (26)
++#define FORCE_USB_CLKEN_OFST (25)
++#define FORCE_DRVVBUS_OFST (24)
++#define FORCE_DATAIN_OFST (23)
++#define FORCE_TXVALID_OFST (22)
++#define FORCE_DM_PULLDOWN_OFST (21)
++#define FORCE_DP_PULLDOWN_OFST (20)
++#define FORCE_XCVRSEL_OFST (19)
++#define FORCE_SUSPENDM_OFST (18)
++#define FORCE_TERMSEL_OFST (17)
++#define FORCE_OPMODE_OFST (16)
++#define UTMI_MUXSEL_OFST (15)
++#define RG_RESET_OFST (14)
++#define RG_DATAIN_OFST (10)
++#define RG_TXVALIDH_OFST (9)
++#define RG_TXVALID_OFST (8)
++#define RG_DMPULLDOWN_OFST (7)
++#define RG_DPPULLDOWN_OFST (6)
++#define RG_XCVRSEL_OFST (4)
++#define RG_SUSPENDM_OFST (3)
++#define RG_TERMSEL_OFST (2)
++#define RG_OPMODE_OFST (0)
++
++//U3D_U2PHYDTM1
++#define RG_USB20_PRBS7_EN_OFST (31)
++#define RG_USB20_PRBS7_BITCNT_OFST (24)
++#define RG_USB20_CLK48M_EN_OFST (23)
++#define RG_USB20_CLK60M_EN_OFST (22)
++#define RG_UART_I_OFST (19)
++#define RG_UART_BIAS_EN_OFST (18)
++#define RG_UART_TX_OE_OFST (17)
++#define RG_UART_EN_OFST (16)
++#define FORCE_VBUSVALID_OFST (13)
++#define FORCE_SESSEND_OFST (12)
++#define FORCE_BVALID_OFST (11)
++#define FORCE_AVALID_OFST (10)
++#define FORCE_IDDIG_OFST (9)
++#define FORCE_IDPULLUP_OFST (8)
++#define RG_VBUSVALID_OFST (5)
++#define RG_SESSEND_OFST (4)
++#define RG_BVALID_OFST (3)
++#define RG_AVALID_OFST (2)
++#define RG_IDDIG_OFST (1)
++#define RG_IDPULLUP_OFST (0)
++
++//U3D_U2PHYDMON0
++#define RG_USB20_PRBS7_BERTH_OFST (0)
++
++//U3D_U2PHYDMON1
++#define USB20_UART_O_OFST (31)
++#define RGO_USB20_LB_PASS_OFST (30)
++#define RGO_USB20_LB_DONE_OFST (29)
++#define AD_USB20_BVALID_OFST (28)
++#define USB20_IDDIG_OFST (27)
++#define AD_USB20_VBUSVALID_OFST (26)
++#define AD_USB20_SESSEND_OFST (25)
++#define AD_USB20_AVALID_OFST (24)
++#define USB20_LINE_STATE_OFST (22)
++#define USB20_HST_DISCON_OFST (21)
++#define USB20_TX_READY_OFST (20)
++#define USB20_RX_ERROR_OFST (19)
++#define USB20_RX_ACTIVE_OFST (18)
++#define USB20_RX_VALIDH_OFST (17)
++#define USB20_RX_VALID_OFST (16)
++#define USB20_DATA_OUT_OFST (0)
++
++//U3D_U2PHYDMON2
++#define RGO_TXVALID_CNT_OFST (24)
++#define RGO_RXACTIVE_CNT_OFST (16)
++#define RGO_USB20_LB_BERCNT_OFST (8)
++#define USB20_PROBE_OUT_OFST (0)
++
++//U3D_U2PHYDMON3
++#define RGO_USB20_PRBS7_ERRCNT_OFST (16)
++#define RGO_USB20_PRBS7_DONE_OFST (3)
++#define RGO_USB20_PRBS7_LOCK_OFST (2)
++#define RGO_USB20_PRBS7_PASS_OFST (1)
++#define RGO_USB20_PRBS7_PASSTH_OFST (0)
++
++//U3D_U2PHYBC12C
++#define RG_SIFSLV_CHGDT_DEGLCH_CNT_OFST (28)
++#define RG_SIFSLV_CHGDT_CTRL_CNT_OFST (24)
++#define RG_SIFSLV_CHGDT_FORCE_MODE_OFST (16)
++#define RG_CHGDT_ISRC_LEV_OFST (14)
++#define RG_CHGDT_VDATSRC_OFST (13)
++#define RG_CHGDT_BGVREF_SEL_OFST (10)
++#define RG_CHGDT_RDVREF_SEL_OFST (8)
++#define RG_CHGDT_ISRC_DP_OFST (7)
++#define RG_SIFSLV_CHGDT_OPOUT_DM_OFST (6)
++#define RG_CHGDT_VDAT_DM_OFST (5)
++#define RG_CHGDT_OPOUT_DP_OFST (4)
++#define RG_SIFSLV_CHGDT_VDAT_DP_OFST (3)
++#define RG_SIFSLV_CHGDT_COMP_EN_OFST (2)
++#define RG_SIFSLV_CHGDT_OPDRV_EN_OFST (1)
++#define RG_CHGDT_EN_OFST (0)
++
++//U3D_U2PHYBC12C1
++#define RG_CHGDT_REV_OFST (0)
++
++//U3D_REGFCOM
++#define RG_PAGE_OFST (24)
++#define I2C_MODE_OFST (16)
++
++
++///////////////////////////////////////////////////////////////////////////////
++
++struct u3phya_reg {
++ //0x0
++ PHY_LE32 reg0;
++ PHY_LE32 reg1;
++ PHY_LE32 reg2;
++ PHY_LE32 reg3;
++ //0x10
++ PHY_LE32 reg4;
++ PHY_LE32 reg5;
++ PHY_LE32 reg6;
++ PHY_LE32 reg7;
++ //0x20
++ PHY_LE32 reg8;
++ PHY_LE32 reg9;
++ PHY_LE32 rega;
++ PHY_LE32 regb;
++ //0x30
++ PHY_LE32 regc;
++ PHY_LE32 regd;
++ PHY_LE32 rege;
++};
++
++//U3D_reg0
++#define RG_SSUSB_BGR_EN (0x1<<31) //31:31
++#define RG_SSUSB_CHPEN (0x1<<30) //30:30
++#define RG_SSUSB_BG_DIV (0x3<<28) //29:28
++#define RG_SSUSB_INTR_EN (0x1<<26) //26:26
++#define RG_SSUSB_MPX_OUT_SEL (0x3<<24) //25:24
++#define RG_SSUSB_MPX_SEL (0xff<<16) //23:16
++#define RG_SSUSB_REF_EN (0x1<<15) //15:15
++#define RG_SSUSB_VRT_VREF_SEL (0xf<<11) //14:11
++#define RG_SSUSB_BG_RASEL (0x3<<9) //10:9
++#define RG_SSUSB_BG_RBSEL (0x3<<7) //8:7
++#define RG_SSUSB_BG_MONEN (0x1<<6) //6:6
++#define RG_PCIE_CLKDRV_OFFSET (0x3<<0) //1:0
++
++//U3D_reg1
++#define RG_PCIE_CLKDRV_SLEW (0x3<<30) //31:30
++#define RG_PCIE_CLKDRV_AMP (0x7<<27) //29:27
++#define RG_SSUSB_XTAL_TST_A2DCK_EN (0x1<<26) //26:26
++#define RG_SSUSB_XTAL_MON_EN (0x1<<25) //25:25
++#define RG_SSUSB_XTAL_HYS (0x1<<24) //24:24
++#define RG_SSUSB_XTAL_TOP_RESERVE (0xffff<<8) //23:8
++#define RG_SSUSB_SYSPLL_RESERVE (0xf<<4) //7:4
++#define RG_SSUSB_SYSPLL_FBSEL (0x3<<2) //3:2
++#define RG_SSUSB_SYSPLL_PREDIV (0x3<<0) //1:0
++
++//U3D_reg2
++#define RG_SSUSB_SYSPLL_LF (0x1<<31) //31:31
++#define RG_SSUSB_SYSPLL_FBDIV (0x7f<<24) //30:24
++#define RG_SSUSB_SYSPLL_POSDIV (0x3<<22) //23:22
++#define RG_SSUSB_SYSPLL_VCO_DIV_SEL (0x1<<21) //21:21
++#define RG_SSUSB_SYSPLL_BLP (0x1<<20) //20:20
++#define RG_SSUSB_SYSPLL_BP (0x1<<19) //19:19
++#define RG_SSUSB_SYSPLL_BR (0x1<<18) //18:18
++#define RG_SSUSB_SYSPLL_BC (0x1<<17) //17:17
++#define RG_SSUSB_SYSPLL_DIVEN (0x7<<14) //16:14
++#define RG_SSUSB_SYSPLL_FPEN (0x1<<13) //13:13
++#define RG_SSUSB_SYSPLL_MONCK_EN (0x1<<12) //12:12
++#define RG_SSUSB_SYSPLL_MONVC_EN (0x1<<11) //11:11
++#define RG_SSUSB_SYSPLL_MONREF_EN (0x1<<10) //10:10
++#define RG_SSUSB_SYSPLL_VOD_EN (0x1<<9) //9:9
++#define RG_SSUSB_SYSPLL_CK_SEL (0x1<<8) //8:8
++
++//U3D_reg3
++#define RG_SSUSB_SYSPLL_TOP_RESERVE (0xffff<<16) //31:16
++
++//U3D_reg4
++#define RG_SSUSB_SYSPLL_PCW_NCPO (0x7fffffff<<1) //31:1
++
++//U3D_reg5
++#define RG_SSUSB_SYSPLL_DDS_PI_C (0x7<<29) //31:29
++#define RG_SSUSB_SYSPLL_DDS_HF_EN (0x1<<28) //28:28
++#define RG_SSUSB_SYSPLL_DDS_PREDIV2 (0x1<<27) //27:27
++#define RG_SSUSB_SYSPLL_DDS_POSTDIV2 (0x1<<26) //26:26
++#define RG_SSUSB_SYSPLL_DDS_PI_PL_EN (0x1<<25) //25:25
++#define RG_SSUSB_SYSPLL_DDS_PI_RST_SEL (0x1<<24) //24:24
++#define RG_SSUSB_SYSPLL_DDS_MONEN (0x1<<23) //23:23
++#define RG_SSUSB_SYSPLL_DDS_LPF_EN (0x1<<22) //22:22
++#define RG_SSUSB_SYSPLL_CLK_PH_INV (0x1<<21) //21:21
++#define RG_SSUSB_SYSPLL_DDS_SEL_EXT (0x1<<20) //20:20
++#define RG_SSUSB_SYSPLL_DDS_DMY (0xffff<<0) //15:0
++
++//U3D_reg6
++#define RG_SSUSB_TX250MCK_INVB (0x1<<31) //31:31
++#define RG_SSUSB_IDRV_ITAILOP_EN (0x1<<30) //30:30
++#define RG_SSUSB_IDRV_CALIB (0x3f<<24) //29:24
++#define RG_SSUSB_TX_R50_FON (0x1<<23) //23:23
++#define RG_SSUSB_TX_SR (0x7<<20) //22:20
++#define RG_SSUSB_TX_EIDLE_CM (0xf<<16) //19:16
++#define RG_SSUSB_RXDET_RSEL (0x3<<14) //15:14
++#define RG_SSUSB_RXDET_VTHSEL (0x3<<12) //13:12
++#define RG_SSUSB_CKMON_EN (0x1<<11) //11:11
++#define RG_SSUSB_CKMON_SEL (0x7<<8) //10:8
++#define RG_SSUSB_TX_VLMON_EN (0x1<<7) //7:7
++#define RG_SSUSB_TX_VLMON_SEL (0x1<<6) //6:6
++#define RG_SSUSB_RXLBTX_EN (0x1<<5) //5:5
++#define RG_SSUSB_TXLBRX_EN (0x1<<4) //4:4
++
++//U3D_reg7
++#define RG_SSUSB_RESERVE (0xfffff<<12) //31:12
++#define RG_SSUSB_PLL_CKCTRL (0x3<<10) //11:10
++#define RG_SSUSB_PLL_POSDIV (0x3<<8) //9:8
++#define RG_SSUSB_PLL_AUTOK_LOAD (0x1<<7) //7:7
++#define RG_SSUSB_PLL_LOAD_RSTB (0x1<<6) //6:6
++#define RG_SSUSB_PLL_EP_EN (0x1<<5) //5:5
++#define RG_SSUSB_PLL_VOD_EN (0x1<<4) //4:4
++#define RG_SSUSB_PLL_V11_EN (0x1<<3) //3:3
++#define RG_SSUSB_PLL_MONREF_EN (0x1<<2) //2:2
++#define RG_SSUSB_PLL_MONCK_EN (0x1<<1) //1:1
++#define RG_SSUSB_PLL_MONVC_EN (0x1<<0) //0:0
++
++//U3D_reg8
++#define RG_SSUSB_PLL_RESERVE (0xffff<<0) //15:0
++
++//U3D_reg9
++#define RG_SSUSB_PLL_DDS_DMY (0xffff<<16) //31:16
++#define RG_SSUSB_PLL_SSC_PRD (0xffff<<0) //15:0
++
++//U3D_regA
++#define RG_SSUSB_PLL_SSC_PHASE_INI (0x1<<31) //31:31
++#define RG_SSUSB_PLL_SSC_TRI_EN (0x1<<30) //30:30
++#define RG_SSUSB_PLL_CLK_PH_INV (0x1<<29) //29:29
++#define RG_SSUSB_PLL_DDS_LPF_EN (0x1<<28) //28:28
++#define RG_SSUSB_PLL_DDS_VADJ (0x7<<21) //23:21
++#define RG_SSUSB_PLL_DDS_MONEN (0x1<<20) //20:20
++#define RG_SSUSB_PLL_DDS_PS_VADJ (0x7<<17) //19:17
++#define RG_SSUSB_PLL_DDS_SEL_EXT (0x1<<16) //16:16
++#define RG_SSUSB_CDR_PD_DIV_BYPASS (0x1<<15) //15:15
++#define RG_SSUSB_CDR_PD_DIV_SEL (0x1<<14) //14:14
++#define RG_SSUSB_CDR_CPBIAS_SEL (0x1<<13) //13:13
++#define RG_SSUSB_CDR_OSCDET_EN (0x1<<12) //12:12
++#define RG_SSUSB_CDR_MONMUX (0x1<<11) //11:11
++#define RG_SSUSB_CDR_CKCTRL (0x3<<9) //10:9
++#define RG_SSUSB_CDR_ACCEN (0x1<<8) //8:8
++#define RG_SSUSB_CDR_BYPASS (0x3<<6) //7:6
++#define RG_SSUSB_CDR_PI_SLEW (0x3<<4) //5:4
++#define RG_SSUSB_CDR_EPEN (0x1<<3) //3:3
++#define RG_SSUSB_CDR_AUTOK_LOAD (0x1<<2) //2:2
++#define RG_SSUSB_CDR_LOAD_RSTB (0x1<<1) //1:1
++#define RG_SSUSB_CDR_MONEN (0x1<<0) //0:0
++
++//U3D_regB
++#define RG_SSUSB_CDR_MONEN_DIG (0x1<<31) //31:31
++#define RG_SSUSB_CDR_REGOD (0x3<<29) //30:29
++#define RG_SSUSB_RX_DAC_EN (0x1<<26) //26:26
++#define RG_SSUSB_RX_DAC_PWD (0x1<<25) //25:25
++#define RG_SSUSB_EQ_CURSEL (0x1<<24) //24:24
++#define RG_SSUSB_RX_DAC_MUX (0x1f<<19) //23:19
++#define RG_SSUSB_RX_R2T_EN (0x1<<18) //18:18
++#define RG_SSUSB_RX_T2R_EN (0x1<<17) //17:17
++#define RG_SSUSB_RX_50_LOWER (0x7<<14) //16:14
++#define RG_SSUSB_RX_50_TAR (0x3<<12) //13:12
++#define RG_SSUSB_RX_SW_CTRL (0xf<<7) //10:7
++#define RG_PCIE_SIGDET_VTH (0x3<<5) //6:5
++#define RG_PCIE_SIGDET_LPF (0x3<<3) //4:3
++#define RG_SSUSB_LFPS_MON_EN (0x1<<2) //2:2
++
++//U3D_regC
++#define RG_SSUSB_RXAFE_DCMON_SEL (0xf<<28) //31:28
++#define RG_SSUSB_CDR_RESERVE (0xff<<16) //23:16
++#define RG_SSUSB_RXAFE_RESERVE (0xff<<8) //15:8
++#define RG_PCIE_RX_RESERVE (0xff<<0) //7:0
++
++//U3D_redD
++#define RGS_SSUSB_CDR_NO_OSC (0x1<<8) //8:8
++#define RGS_SSUSB_RX_DEBUG_RESERVE (0xff<<0) //7:0
++
++//U3D_regE
++#define RG_SSUSB_INT_BIAS_SEL (0x1<<4) //4:4
++#define RG_SSUSB_EXT_BIAS_SEL (0x1<<3) //3:3
++#define RG_SSUSB_RX_P1_ENTRY_PASS (0x1<<2) //2:2
++#define RG_SSUSB_RX_PD_RST (0x1<<1) //1:1
++#define RG_SSUSB_RX_PD_RST_PASS (0x1<<0) //0:0
++
++
++/* OFFSET */
++
++//U3D_reg0
++#define RG_SSUSB_BGR_EN_OFST (31)
++#define RG_SSUSB_CHPEN_OFST (30)
++#define RG_SSUSB_BG_DIV_OFST (28)
++#define RG_SSUSB_INTR_EN_OFST (26)
++#define RG_SSUSB_MPX_OUT_SEL_OFST (24)
++#define RG_SSUSB_MPX_SEL_OFST (16)
++#define RG_SSUSB_REF_EN_OFST (15)
++#define RG_SSUSB_VRT_VREF_SEL_OFST (11)
++#define RG_SSUSB_BG_RASEL_OFST (9)
++#define RG_SSUSB_BG_RBSEL_OFST (7)
++#define RG_SSUSB_BG_MONEN_OFST (6)
++#define RG_PCIE_CLKDRV_OFFSET_OFST (0)
++
++//U3D_reg1
++#define RG_PCIE_CLKDRV_SLEW_OFST (30)
++#define RG_PCIE_CLKDRV_AMP_OFST (27)
++#define RG_SSUSB_XTAL_TST_A2DCK_EN_OFST (26)
++#define RG_SSUSB_XTAL_MON_EN_OFST (25)
++#define RG_SSUSB_XTAL_HYS_OFST (24)
++#define RG_SSUSB_XTAL_TOP_RESERVE_OFST (8)
++#define RG_SSUSB_SYSPLL_RESERVE_OFST (4)
++#define RG_SSUSB_SYSPLL_FBSEL_OFST (2)
++#define RG_SSUSB_SYSPLL_PREDIV_OFST (0)
++
++//U3D_reg2
++#define RG_SSUSB_SYSPLL_LF_OFST (31)
++#define RG_SSUSB_SYSPLL_FBDIV_OFST (24)
++#define RG_SSUSB_SYSPLL_POSDIV_OFST (22)
++#define RG_SSUSB_SYSPLL_VCO_DIV_SEL_OFST (21)
++#define RG_SSUSB_SYSPLL_BLP_OFST (20)
++#define RG_SSUSB_SYSPLL_BP_OFST (19)
++#define RG_SSUSB_SYSPLL_BR_OFST (18)
++#define RG_SSUSB_SYSPLL_BC_OFST (17)
++#define RG_SSUSB_SYSPLL_DIVEN_OFST (14)
++#define RG_SSUSB_SYSPLL_FPEN_OFST (13)
++#define RG_SSUSB_SYSPLL_MONCK_EN_OFST (12)
++#define RG_SSUSB_SYSPLL_MONVC_EN_OFST (11)
++#define RG_SSUSB_SYSPLL_MONREF_EN_OFST (10)
++#define RG_SSUSB_SYSPLL_VOD_EN_OFST (9)
++#define RG_SSUSB_SYSPLL_CK_SEL_OFST (8)
++
++//U3D_reg3
++#define RG_SSUSB_SYSPLL_TOP_RESERVE_OFST (16)
++
++//U3D_reg4
++#define RG_SSUSB_SYSPLL_PCW_NCPO_OFST (1)
++
++//U3D_reg5
++#define RG_SSUSB_SYSPLL_DDS_PI_C_OFST (29)
++#define RG_SSUSB_SYSPLL_DDS_HF_EN_OFST (28)
++#define RG_SSUSB_SYSPLL_DDS_PREDIV2_OFST (27)
++#define RG_SSUSB_SYSPLL_DDS_POSTDIV2_OFST (26)
++#define RG_SSUSB_SYSPLL_DDS_PI_PL_EN_OFST (25)
++#define RG_SSUSB_SYSPLL_DDS_PI_RST_SEL_OFST (24)
++#define RG_SSUSB_SYSPLL_DDS_MONEN_OFST (23)
++#define RG_SSUSB_SYSPLL_DDS_LPF_EN_OFST (22)
++#define RG_SSUSB_SYSPLL_CLK_PH_INV_OFST (21)
++#define RG_SSUSB_SYSPLL_DDS_SEL_EXT_OFST (20)
++#define RG_SSUSB_SYSPLL_DDS_DMY_OFST (0)
++
++//U3D_reg6
++#define RG_SSUSB_TX250MCK_INVB_OFST (31)
++#define RG_SSUSB_IDRV_ITAILOP_EN_OFST (30)
++#define RG_SSUSB_IDRV_CALIB_OFST (24)
++#define RG_SSUSB_TX_R50_FON_OFST (23)
++#define RG_SSUSB_TX_SR_OFST (20)
++#define RG_SSUSB_TX_EIDLE_CM_OFST (16)
++#define RG_SSUSB_RXDET_RSEL_OFST (14)
++#define RG_SSUSB_RXDET_VTHSEL_OFST (12)
++#define RG_SSUSB_CKMON_EN_OFST (11)
++#define RG_SSUSB_CKMON_SEL_OFST (8)
++#define RG_SSUSB_TX_VLMON_EN_OFST (7)
++#define RG_SSUSB_TX_VLMON_SEL_OFST (6)
++#define RG_SSUSB_RXLBTX_EN_OFST (5)
++#define RG_SSUSB_TXLBRX_EN_OFST (4)
++
++//U3D_reg7
++#define RG_SSUSB_RESERVE_OFST (12)
++#define RG_SSUSB_PLL_CKCTRL_OFST (10)
++#define RG_SSUSB_PLL_POSDIV_OFST (8)
++#define RG_SSUSB_PLL_AUTOK_LOAD_OFST (7)
++#define RG_SSUSB_PLL_LOAD_RSTB_OFST (6)
++#define RG_SSUSB_PLL_EP_EN_OFST (5)
++#define RG_SSUSB_PLL_VOD_EN_OFST (4)
++#define RG_SSUSB_PLL_V11_EN_OFST (3)
++#define RG_SSUSB_PLL_MONREF_EN_OFST (2)
++#define RG_SSUSB_PLL_MONCK_EN_OFST (1)
++#define RG_SSUSB_PLL_MONVC_EN_OFST (0)
++
++//U3D_reg8
++#define RG_SSUSB_PLL_RESERVE_OFST (0)
++
++//U3D_reg9
++#define RG_SSUSB_PLL_DDS_DMY_OFST (16)
++#define RG_SSUSB_PLL_SSC_PRD_OFST (0)
++
++//U3D_regA
++#define RG_SSUSB_PLL_SSC_PHASE_INI_OFST (31)
++#define RG_SSUSB_PLL_SSC_TRI_EN_OFST (30)
++#define RG_SSUSB_PLL_CLK_PH_INV_OFST (29)
++#define RG_SSUSB_PLL_DDS_LPF_EN_OFST (28)
++#define RG_SSUSB_PLL_DDS_VADJ_OFST (21)
++#define RG_SSUSB_PLL_DDS_MONEN_OFST (20)
++#define RG_SSUSB_PLL_DDS_PS_VADJ_OFST (17)
++#define RG_SSUSB_PLL_DDS_SEL_EXT_OFST (16)
++#define RG_SSUSB_CDR_PD_DIV_BYPASS_OFST (15)
++#define RG_SSUSB_CDR_PD_DIV_SEL_OFST (14)
++#define RG_SSUSB_CDR_CPBIAS_SEL_OFST (13)
++#define RG_SSUSB_CDR_OSCDET_EN_OFST (12)
++#define RG_SSUSB_CDR_MONMUX_OFST (11)
++#define RG_SSUSB_CDR_CKCTRL_OFST (9)
++#define RG_SSUSB_CDR_ACCEN_OFST (8)
++#define RG_SSUSB_CDR_BYPASS_OFST (6)
++#define RG_SSUSB_CDR_PI_SLEW_OFST (4)
++#define RG_SSUSB_CDR_EPEN_OFST (3)
++#define RG_SSUSB_CDR_AUTOK_LOAD_OFST (2)
++#define RG_SSUSB_CDR_LOAD_RSTB_OFST (1)
++#define RG_SSUSB_CDR_MONEN_OFST (0)
++
++//U3D_regB
++#define RG_SSUSB_CDR_MONEN_DIG_OFST (31)
++#define RG_SSUSB_CDR_REGOD_OFST (29)
++#define RG_SSUSB_RX_DAC_EN_OFST (26)
++#define RG_SSUSB_RX_DAC_PWD_OFST (25)
++#define RG_SSUSB_EQ_CURSEL_OFST (24)
++#define RG_SSUSB_RX_DAC_MUX_OFST (19)
++#define RG_SSUSB_RX_R2T_EN_OFST (18)
++#define RG_SSUSB_RX_T2R_EN_OFST (17)
++#define RG_SSUSB_RX_50_LOWER_OFST (14)
++#define RG_SSUSB_RX_50_TAR_OFST (12)
++#define RG_SSUSB_RX_SW_CTRL_OFST (7)
++#define RG_PCIE_SIGDET_VTH_OFST (5)
++#define RG_PCIE_SIGDET_LPF_OFST (3)
++#define RG_SSUSB_LFPS_MON_EN_OFST (2)
++
++//U3D_regC
++#define RG_SSUSB_RXAFE_DCMON_SEL_OFST (28)
++#define RG_SSUSB_CDR_RESERVE_OFST (16)
++#define RG_SSUSB_RXAFE_RESERVE_OFST (8)
++#define RG_PCIE_RX_RESERVE_OFST (0)
++
++//U3D_redD
++#define RGS_SSUSB_CDR_NO_OSC_OFST (8)
++#define RGS_SSUSB_RX_DEBUG_RESERVE_OFST (0)
++
++//U3D_regE
++#define RG_SSUSB_INT_BIAS_SEL_OFST (4)
++#define RG_SSUSB_EXT_BIAS_SEL_OFST (3)
++#define RG_SSUSB_RX_P1_ENTRY_PASS_OFST (2)
++#define RG_SSUSB_RX_PD_RST_OFST (1)
++#define RG_SSUSB_RX_PD_RST_PASS_OFST (0)
++
++///////////////////////////////////////////////////////////////////////////////
++
++struct u3phya_da_reg {
++ //0x0
++ PHY_LE32 reg0;
++ PHY_LE32 reg1;
++ PHY_LE32 reg4;
++ PHY_LE32 reg5;
++ //0x10
++ PHY_LE32 reg6;
++ PHY_LE32 reg7;
++ PHY_LE32 reg8;
++ PHY_LE32 reg9;
++ //0x20
++ PHY_LE32 reg10;
++ PHY_LE32 reg12;
++ PHY_LE32 reg13;
++ PHY_LE32 reg14;
++ //0x30
++ PHY_LE32 reg15;
++ PHY_LE32 reg16;
++ PHY_LE32 reg19;
++ PHY_LE32 reg20;
++ //0x40
++ PHY_LE32 reg21;
++ PHY_LE32 reg23;
++ PHY_LE32 reg25;
++ PHY_LE32 reg26;
++ //0x50
++ PHY_LE32 reg28;
++ PHY_LE32 reg29;
++ PHY_LE32 reg30;
++ PHY_LE32 reg31;
++ //0x60
++ PHY_LE32 reg32;
++ PHY_LE32 reg33;
++};
++
++//U3D_reg0
++#define RG_PCIE_SPEED_PE2D (0x1<<24) //24:24
++#define RG_PCIE_SPEED_PE2H (0x1<<23) //23:23
++#define RG_PCIE_SPEED_PE1D (0x1<<22) //22:22
++#define RG_PCIE_SPEED_PE1H (0x1<<21) //21:21
++#define RG_PCIE_SPEED_U3 (0x1<<20) //20:20
++#define RG_SSUSB_XTAL_EXT_EN_PE2D (0x3<<18) //19:18
++#define RG_SSUSB_XTAL_EXT_EN_PE2H (0x3<<16) //17:16
++#define RG_SSUSB_XTAL_EXT_EN_PE1D (0x3<<14) //15:14
++#define RG_SSUSB_XTAL_EXT_EN_PE1H (0x3<<12) //13:12
++#define RG_SSUSB_XTAL_EXT_EN_U3 (0x3<<10) //11:10
++#define RG_SSUSB_CDR_REFCK_SEL_PE2D (0x3<<8) //9:8
++#define RG_SSUSB_CDR_REFCK_SEL_PE2H (0x3<<6) //7:6
++#define RG_SSUSB_CDR_REFCK_SEL_PE1D (0x3<<4) //5:4
++#define RG_SSUSB_CDR_REFCK_SEL_PE1H (0x3<<2) //3:2
++#define RG_SSUSB_CDR_REFCK_SEL_U3 (0x3<<0) //1:0
++
++//U3D_reg1
++#define RG_USB20_REFCK_SEL_PE2D (0x1<<30) //30:30
++#define RG_USB20_REFCK_SEL_PE2H (0x1<<29) //29:29
++#define RG_USB20_REFCK_SEL_PE1D (0x1<<28) //28:28
++#define RG_USB20_REFCK_SEL_PE1H (0x1<<27) //27:27
++#define RG_USB20_REFCK_SEL_U3 (0x1<<26) //26:26
++#define RG_PCIE_REFCK_DIV4_PE2D (0x1<<25) //25:25
++#define RG_PCIE_REFCK_DIV4_PE2H (0x1<<24) //24:24
++#define RG_PCIE_REFCK_DIV4_PE1D (0x1<<18) //18:18
++#define RG_PCIE_REFCK_DIV4_PE1H (0x1<<17) //17:17
++#define RG_PCIE_REFCK_DIV4_U3 (0x1<<16) //16:16
++#define RG_PCIE_MODE_PE2D (0x1<<8) //8:8
++#define RG_PCIE_MODE_PE2H (0x1<<3) //3:3
++#define RG_PCIE_MODE_PE1D (0x1<<2) //2:2
++#define RG_PCIE_MODE_PE1H (0x1<<1) //1:1
++#define RG_PCIE_MODE_U3 (0x1<<0) //0:0
++
++//U3D_reg4
++#define RG_SSUSB_PLL_DIVEN_PE2D (0x7<<22) //24:22
++#define RG_SSUSB_PLL_DIVEN_PE2H (0x7<<19) //21:19
++#define RG_SSUSB_PLL_DIVEN_PE1D (0x7<<16) //18:16
++#define RG_SSUSB_PLL_DIVEN_PE1H (0x7<<13) //15:13
++#define RG_SSUSB_PLL_DIVEN_U3 (0x7<<10) //12:10
++#define RG_SSUSB_PLL_BC_PE2D (0x3<<8) //9:8
++#define RG_SSUSB_PLL_BC_PE2H (0x3<<6) //7:6
++#define RG_SSUSB_PLL_BC_PE1D (0x3<<4) //5:4
++#define RG_SSUSB_PLL_BC_PE1H (0x3<<2) //3:2
++#define RG_SSUSB_PLL_BC_U3 (0x3<<0) //1:0
++
++//U3D_reg5
++#define RG_SSUSB_PLL_BR_PE2D (0x7<<27) //29:27
++#define RG_SSUSB_PLL_BR_PE2H (0x7<<24) //26:24
++#define RG_SSUSB_PLL_BR_PE1D (0x7<<21) //23:21
++#define RG_SSUSB_PLL_BR_PE1H (0x7<<18) //20:18
++#define RG_SSUSB_PLL_BR_U3 (0x7<<15) //17:15
++#define RG_SSUSB_PLL_IC_PE2D (0x7<<12) //14:12
++#define RG_SSUSB_PLL_IC_PE2H (0x7<<9) //11:9
++#define RG_SSUSB_PLL_IC_PE1D (0x7<<6) //8:6
++#define RG_SSUSB_PLL_IC_PE1H (0x7<<3) //5:3
++#define RG_SSUSB_PLL_IC_U3 (0x7<<0) //2:0
++
++//U3D_reg6
++#define RG_SSUSB_PLL_IR_PE2D (0xf<<24) //27:24
++#define RG_SSUSB_PLL_IR_PE2H (0xf<<16) //19:16
++#define RG_SSUSB_PLL_IR_PE1D (0xf<<8) //11:8
++#define RG_SSUSB_PLL_IR_PE1H (0xf<<4) //7:4
++#define RG_SSUSB_PLL_IR_U3 (0xf<<0) //3:0
++
++//U3D_reg7
++#define RG_SSUSB_PLL_BP_PE2D (0xf<<24) //27:24
++#define RG_SSUSB_PLL_BP_PE2H (0xf<<16) //19:16
++#define RG_SSUSB_PLL_BP_PE1D (0xf<<8) //11:8
++#define RG_SSUSB_PLL_BP_PE1H (0xf<<4) //7:4
++#define RG_SSUSB_PLL_BP_U3 (0xf<<0) //3:0
++
++//U3D_reg8
++#define RG_SSUSB_PLL_FBKSEL_PE2D (0x3<<24) //25:24
++#define RG_SSUSB_PLL_FBKSEL_PE2H (0x3<<16) //17:16
++#define RG_SSUSB_PLL_FBKSEL_PE1D (0x3<<8) //9:8
++#define RG_SSUSB_PLL_FBKSEL_PE1H (0x3<<2) //3:2
++#define RG_SSUSB_PLL_FBKSEL_U3 (0x3<<0) //1:0
++
++//U3D_reg9
++#define RG_SSUSB_PLL_FBKDIV_PE2H (0x7f<<24) //30:24
++#define RG_SSUSB_PLL_FBKDIV_PE1D (0x7f<<16) //22:16
++#define RG_SSUSB_PLL_FBKDIV_PE1H (0x7f<<8) //14:8
++#define RG_SSUSB_PLL_FBKDIV_U3 (0x7f<<0) //6:0
++
++//U3D_reg10
++#define RG_SSUSB_PLL_PREDIV_PE2D (0x3<<26) //27:26
++#define RG_SSUSB_PLL_PREDIV_PE2H (0x3<<24) //25:24
++#define RG_SSUSB_PLL_PREDIV_PE1D (0x3<<18) //19:18
++#define RG_SSUSB_PLL_PREDIV_PE1H (0x3<<16) //17:16
++#define RG_SSUSB_PLL_PREDIV_U3 (0x3<<8) //9:8
++#define RG_SSUSB_PLL_FBKDIV_PE2D (0x7f<<0) //6:0
++
++//U3D_reg12
++#define RG_SSUSB_PLL_PCW_NCPO_U3 (0x7fffffff<<0) //30:0
++
++//U3D_reg13
++#define RG_SSUSB_PLL_PCW_NCPO_PE1H (0x7fffffff<<0) //30:0
++
++//U3D_reg14
++#define RG_SSUSB_PLL_PCW_NCPO_PE1D (0x7fffffff<<0) //30:0
++
++//U3D_reg15
++#define RG_SSUSB_PLL_PCW_NCPO_PE2H (0x7fffffff<<0) //30:0
++
++//U3D_reg16
++#define RG_SSUSB_PLL_PCW_NCPO_PE2D (0x7fffffff<<0) //30:0
++
++//U3D_reg19
++#define RG_SSUSB_PLL_SSC_DELTA1_PE1H (0xffff<<16) //31:16
++#define RG_SSUSB_PLL_SSC_DELTA1_U3 (0xffff<<0) //15:0
++
++//U3D_reg20
++#define RG_SSUSB_PLL_SSC_DELTA1_PE2H (0xffff<<16) //31:16
++#define RG_SSUSB_PLL_SSC_DELTA1_PE1D (0xffff<<0) //15:0
++
++//U3D_reg21
++#define RG_SSUSB_PLL_SSC_DELTA_U3 (0xffff<<16) //31:16
++#define RG_SSUSB_PLL_SSC_DELTA1_PE2D (0xffff<<0) //15:0
++
++//U3D_reg23
++#define RG_SSUSB_PLL_SSC_DELTA_PE1D (0xffff<<16) //31:16
++#define RG_SSUSB_PLL_SSC_DELTA_PE1H (0xffff<<0) //15:0
++
++//U3D_reg25
++#define RG_SSUSB_PLL_SSC_DELTA_PE2D (0xffff<<16) //31:16
++#define RG_SSUSB_PLL_SSC_DELTA_PE2H (0xffff<<0) //15:0
++
++//U3D_reg26
++#define RG_SSUSB_PLL_REFCKDIV_PE2D (0x1<<25) //25:25
++#define RG_SSUSB_PLL_REFCKDIV_PE2H (0x1<<24) //24:24
++#define RG_SSUSB_PLL_REFCKDIV_PE1D (0x1<<16) //16:16
++#define RG_SSUSB_PLL_REFCKDIV_PE1H (0x1<<8) //8:8
++#define RG_SSUSB_PLL_REFCKDIV_U3 (0x1<<0) //0:0
++
++//U3D_reg28
++#define RG_SSUSB_CDR_BPA_PE2D (0x3<<24) //25:24
++#define RG_SSUSB_CDR_BPA_PE2H (0x3<<16) //17:16
++#define RG_SSUSB_CDR_BPA_PE1D (0x3<<10) //11:10
++#define RG_SSUSB_CDR_BPA_PE1H (0x3<<8) //9:8
++#define RG_SSUSB_CDR_BPA_U3 (0x3<<0) //1:0
++
++//U3D_reg29
++#define RG_SSUSB_CDR_BPB_PE2D (0x7<<24) //26:24
++#define RG_SSUSB_CDR_BPB_PE2H (0x7<<16) //18:16
++#define RG_SSUSB_CDR_BPB_PE1D (0x7<<6) //8:6
++#define RG_SSUSB_CDR_BPB_PE1H (0x7<<3) //5:3
++#define RG_SSUSB_CDR_BPB_U3 (0x7<<0) //2:0
++
++//U3D_reg30
++#define RG_SSUSB_CDR_BR_PE2D (0x7<<24) //26:24
++#define RG_SSUSB_CDR_BR_PE2H (0x7<<16) //18:16
++#define RG_SSUSB_CDR_BR_PE1D (0x7<<6) //8:6
++#define RG_SSUSB_CDR_BR_PE1H (0x7<<3) //5:3
++#define RG_SSUSB_CDR_BR_U3 (0x7<<0) //2:0
++
++//U3D_reg31
++#define RG_SSUSB_CDR_FBDIV_PE2H (0x7f<<24) //30:24
++#define RG_SSUSB_CDR_FBDIV_PE1D (0x7f<<16) //22:16
++#define RG_SSUSB_CDR_FBDIV_PE1H (0x7f<<8) //14:8
++#define RG_SSUSB_CDR_FBDIV_U3 (0x7f<<0) //6:0
++
++//U3D_reg32
++#define RG_SSUSB_EQ_RSTEP1_PE2D (0x3<<30) //31:30
++#define RG_SSUSB_EQ_RSTEP1_PE2H (0x3<<28) //29:28
++#define RG_SSUSB_EQ_RSTEP1_PE1D (0x3<<26) //27:26
++#define RG_SSUSB_EQ_RSTEP1_PE1H (0x3<<24) //25:24
++#define RG_SSUSB_EQ_RSTEP1_U3 (0x3<<22) //23:22
++#define RG_SSUSB_LFPS_DEGLITCH_PE2D (0x3<<20) //21:20
++#define RG_SSUSB_LFPS_DEGLITCH_PE2H (0x3<<18) //19:18
++#define RG_SSUSB_LFPS_DEGLITCH_PE1D (0x3<<16) //17:16
++#define RG_SSUSB_LFPS_DEGLITCH_PE1H (0x3<<14) //15:14
++#define RG_SSUSB_LFPS_DEGLITCH_U3 (0x3<<12) //13:12
++#define RG_SSUSB_CDR_KVSEL_PE2D (0x1<<11) //11:11
++#define RG_SSUSB_CDR_KVSEL_PE2H (0x1<<10) //10:10
++#define RG_SSUSB_CDR_KVSEL_PE1D (0x1<<9) //9:9
++#define RG_SSUSB_CDR_KVSEL_PE1H (0x1<<8) //8:8
++#define RG_SSUSB_CDR_KVSEL_U3 (0x1<<7) //7:7
++#define RG_SSUSB_CDR_FBDIV_PE2D (0x7f<<0) //6:0
++
++//U3D_reg33
++#define RG_SSUSB_RX_CMPWD_PE2D (0x1<<26) //26:26
++#define RG_SSUSB_RX_CMPWD_PE2H (0x1<<25) //25:25
++#define RG_SSUSB_RX_CMPWD_PE1D (0x1<<24) //24:24
++#define RG_SSUSB_RX_CMPWD_PE1H (0x1<<23) //23:23
++#define RG_SSUSB_RX_CMPWD_U3 (0x1<<16) //16:16
++#define RG_SSUSB_EQ_RSTEP2_PE2D (0x3<<8) //9:8
++#define RG_SSUSB_EQ_RSTEP2_PE2H (0x3<<6) //7:6
++#define RG_SSUSB_EQ_RSTEP2_PE1D (0x3<<4) //5:4
++#define RG_SSUSB_EQ_RSTEP2_PE1H (0x3<<2) //3:2
++#define RG_SSUSB_EQ_RSTEP2_U3 (0x3<<0) //1:0
++
++
++/* OFFSET */
++
++//U3D_reg0
++#define RG_PCIE_SPEED_PE2D_OFST (24)
++#define RG_PCIE_SPEED_PE2H_OFST (23)
++#define RG_PCIE_SPEED_PE1D_OFST (22)
++#define RG_PCIE_SPEED_PE1H_OFST (21)
++#define RG_PCIE_SPEED_U3_OFST (20)
++#define RG_SSUSB_XTAL_EXT_EN_PE2D_OFST (18)
++#define RG_SSUSB_XTAL_EXT_EN_PE2H_OFST (16)
++#define RG_SSUSB_XTAL_EXT_EN_PE1D_OFST (14)
++#define RG_SSUSB_XTAL_EXT_EN_PE1H_OFST (12)
++#define RG_SSUSB_XTAL_EXT_EN_U3_OFST (10)
++#define RG_SSUSB_CDR_REFCK_SEL_PE2D_OFST (8)
++#define RG_SSUSB_CDR_REFCK_SEL_PE2H_OFST (6)
++#define RG_SSUSB_CDR_REFCK_SEL_PE1D_OFST (4)
++#define RG_SSUSB_CDR_REFCK_SEL_PE1H_OFST (2)
++#define RG_SSUSB_CDR_REFCK_SEL_U3_OFST (0)
++
++//U3D_reg1
++#define RG_USB20_REFCK_SEL_PE2D_OFST (30)
++#define RG_USB20_REFCK_SEL_PE2H_OFST (29)
++#define RG_USB20_REFCK_SEL_PE1D_OFST (28)
++#define RG_USB20_REFCK_SEL_PE1H_OFST (27)
++#define RG_USB20_REFCK_SEL_U3_OFST (26)
++#define RG_PCIE_REFCK_DIV4_PE2D_OFST (25)
++#define RG_PCIE_REFCK_DIV4_PE2H_OFST (24)
++#define RG_PCIE_REFCK_DIV4_PE1D_OFST (18)
++#define RG_PCIE_REFCK_DIV4_PE1H_OFST (17)
++#define RG_PCIE_REFCK_DIV4_U3_OFST (16)
++#define RG_PCIE_MODE_PE2D_OFST (8)
++#define RG_PCIE_MODE_PE2H_OFST (3)
++#define RG_PCIE_MODE_PE1D_OFST (2)
++#define RG_PCIE_MODE_PE1H_OFST (1)
++#define RG_PCIE_MODE_U3_OFST (0)
++
++//U3D_reg4
++#define RG_SSUSB_PLL_DIVEN_PE2D_OFST (22)
++#define RG_SSUSB_PLL_DIVEN_PE2H_OFST (19)
++#define RG_SSUSB_PLL_DIVEN_PE1D_OFST (16)
++#define RG_SSUSB_PLL_DIVEN_PE1H_OFST (13)
++#define RG_SSUSB_PLL_DIVEN_U3_OFST (10)
++#define RG_SSUSB_PLL_BC_PE2D_OFST (8)
++#define RG_SSUSB_PLL_BC_PE2H_OFST (6)
++#define RG_SSUSB_PLL_BC_PE1D_OFST (4)
++#define RG_SSUSB_PLL_BC_PE1H_OFST (2)
++#define RG_SSUSB_PLL_BC_U3_OFST (0)
++
++//U3D_reg5
++#define RG_SSUSB_PLL_BR_PE2D_OFST (27)
++#define RG_SSUSB_PLL_BR_PE2H_OFST (24)
++#define RG_SSUSB_PLL_BR_PE1D_OFST (21)
++#define RG_SSUSB_PLL_BR_PE1H_OFST (18)
++#define RG_SSUSB_PLL_BR_U3_OFST (15)
++#define RG_SSUSB_PLL_IC_PE2D_OFST (12)
++#define RG_SSUSB_PLL_IC_PE2H_OFST (9)
++#define RG_SSUSB_PLL_IC_PE1D_OFST (6)
++#define RG_SSUSB_PLL_IC_PE1H_OFST (3)
++#define RG_SSUSB_PLL_IC_U3_OFST (0)
++
++//U3D_reg6
++#define RG_SSUSB_PLL_IR_PE2D_OFST (24)
++#define RG_SSUSB_PLL_IR_PE2H_OFST (16)
++#define RG_SSUSB_PLL_IR_PE1D_OFST (8)
++#define RG_SSUSB_PLL_IR_PE1H_OFST (4)
++#define RG_SSUSB_PLL_IR_U3_OFST (0)
++
++//U3D_reg7
++#define RG_SSUSB_PLL_BP_PE2D_OFST (24)
++#define RG_SSUSB_PLL_BP_PE2H_OFST (16)
++#define RG_SSUSB_PLL_BP_PE1D_OFST (8)
++#define RG_SSUSB_PLL_BP_PE1H_OFST (4)
++#define RG_SSUSB_PLL_BP_U3_OFST (0)
++
++//U3D_reg8
++#define RG_SSUSB_PLL_FBKSEL_PE2D_OFST (24)
++#define RG_SSUSB_PLL_FBKSEL_PE2H_OFST (16)
++#define RG_SSUSB_PLL_FBKSEL_PE1D_OFST (8)
++#define RG_SSUSB_PLL_FBKSEL_PE1H_OFST (2)
++#define RG_SSUSB_PLL_FBKSEL_U3_OFST (0)
++
++//U3D_reg9
++#define RG_SSUSB_PLL_FBKDIV_PE2H_OFST (24)
++#define RG_SSUSB_PLL_FBKDIV_PE1D_OFST (16)
++#define RG_SSUSB_PLL_FBKDIV_PE1H_OFST (8)
++#define RG_SSUSB_PLL_FBKDIV_U3_OFST (0)
++
++//U3D_reg10
++#define RG_SSUSB_PLL_PREDIV_PE2D_OFST (26)
++#define RG_SSUSB_PLL_PREDIV_PE2H_OFST (24)
++#define RG_SSUSB_PLL_PREDIV_PE1D_OFST (18)
++#define RG_SSUSB_PLL_PREDIV_PE1H_OFST (16)
++#define RG_SSUSB_PLL_PREDIV_U3_OFST (8)
++#define RG_SSUSB_PLL_FBKDIV_PE2D_OFST (0)
++
++//U3D_reg12
++#define RG_SSUSB_PLL_PCW_NCPO_U3_OFST (0)
++
++//U3D_reg13
++#define RG_SSUSB_PLL_PCW_NCPO_PE1H_OFST (0)
++
++//U3D_reg14
++#define RG_SSUSB_PLL_PCW_NCPO_PE1D_OFST (0)
++
++//U3D_reg15
++#define RG_SSUSB_PLL_PCW_NCPO_PE2H_OFST (0)
++
++//U3D_reg16
++#define RG_SSUSB_PLL_PCW_NCPO_PE2D_OFST (0)
++
++//U3D_reg19
++#define RG_SSUSB_PLL_SSC_DELTA1_PE1H_OFST (16)
++#define RG_SSUSB_PLL_SSC_DELTA1_U3_OFST (0)
++
++//U3D_reg20
++#define RG_SSUSB_PLL_SSC_DELTA1_PE2H_OFST (16)
++#define RG_SSUSB_PLL_SSC_DELTA1_PE1D_OFST (0)
++
++//U3D_reg21
++#define RG_SSUSB_PLL_SSC_DELTA_U3_OFST (16)
++#define RG_SSUSB_PLL_SSC_DELTA1_PE2D_OFST (0)
++
++//U3D_reg23
++#define RG_SSUSB_PLL_SSC_DELTA_PE1D_OFST (16)
++#define RG_SSUSB_PLL_SSC_DELTA_PE1H_OFST (0)
++
++//U3D_reg25
++#define RG_SSUSB_PLL_SSC_DELTA_PE2D_OFST (16)
++#define RG_SSUSB_PLL_SSC_DELTA_PE2H_OFST (0)
++
++//U3D_reg26
++#define RG_SSUSB_PLL_REFCKDIV_PE2D_OFST (25)
++#define RG_SSUSB_PLL_REFCKDIV_PE2H_OFST (24)
++#define RG_SSUSB_PLL_REFCKDIV_PE1D_OFST (16)
++#define RG_SSUSB_PLL_REFCKDIV_PE1H_OFST (8)
++#define RG_SSUSB_PLL_REFCKDIV_U3_OFST (0)
++
++//U3D_reg28
++#define RG_SSUSB_CDR_BPA_PE2D_OFST (24)
++#define RG_SSUSB_CDR_BPA_PE2H_OFST (16)
++#define RG_SSUSB_CDR_BPA_PE1D_OFST (10)
++#define RG_SSUSB_CDR_BPA_PE1H_OFST (8)
++#define RG_SSUSB_CDR_BPA_U3_OFST (0)
++
++//U3D_reg29
++#define RG_SSUSB_CDR_BPB_PE2D_OFST (24)
++#define RG_SSUSB_CDR_BPB_PE2H_OFST (16)
++#define RG_SSUSB_CDR_BPB_PE1D_OFST (6)
++#define RG_SSUSB_CDR_BPB_PE1H_OFST (3)
++#define RG_SSUSB_CDR_BPB_U3_OFST (0)
++
++//U3D_reg30
++#define RG_SSUSB_CDR_BR_PE2D_OFST (24)
++#define RG_SSUSB_CDR_BR_PE2H_OFST (16)
++#define RG_SSUSB_CDR_BR_PE1D_OFST (6)
++#define RG_SSUSB_CDR_BR_PE1H_OFST (3)
++#define RG_SSUSB_CDR_BR_U3_OFST (0)
++
++//U3D_reg31
++#define RG_SSUSB_CDR_FBDIV_PE2H_OFST (24)
++#define RG_SSUSB_CDR_FBDIV_PE1D_OFST (16)
++#define RG_SSUSB_CDR_FBDIV_PE1H_OFST (8)
++#define RG_SSUSB_CDR_FBDIV_U3_OFST (0)
++
++//U3D_reg32
++#define RG_SSUSB_EQ_RSTEP1_PE2D_OFST (30)
++#define RG_SSUSB_EQ_RSTEP1_PE2H_OFST (28)
++#define RG_SSUSB_EQ_RSTEP1_PE1D_OFST (26)
++#define RG_SSUSB_EQ_RSTEP1_PE1H_OFST (24)
++#define RG_SSUSB_EQ_RSTEP1_U3_OFST (22)
++#define RG_SSUSB_LFPS_DEGLITCH_PE2D_OFST (20)
++#define RG_SSUSB_LFPS_DEGLITCH_PE2H_OFST (18)
++#define RG_SSUSB_LFPS_DEGLITCH_PE1D_OFST (16)
++#define RG_SSUSB_LFPS_DEGLITCH_PE1H_OFST (14)
++#define RG_SSUSB_LFPS_DEGLITCH_U3_OFST (12)
++#define RG_SSUSB_CDR_KVSEL_PE2D_OFST (11)
++#define RG_SSUSB_CDR_KVSEL_PE2H_OFST (10)
++#define RG_SSUSB_CDR_KVSEL_PE1D_OFST (9)
++#define RG_SSUSB_CDR_KVSEL_PE1H_OFST (8)
++#define RG_SSUSB_CDR_KVSEL_U3_OFST (7)
++#define RG_SSUSB_CDR_FBDIV_PE2D_OFST (0)
++
++//U3D_reg33
++#define RG_SSUSB_RX_CMPWD_PE2D_OFST (26)
++#define RG_SSUSB_RX_CMPWD_PE2H_OFST (25)
++#define RG_SSUSB_RX_CMPWD_PE1D_OFST (24)
++#define RG_SSUSB_RX_CMPWD_PE1H_OFST (23)
++#define RG_SSUSB_RX_CMPWD_U3_OFST (16)
++#define RG_SSUSB_EQ_RSTEP2_PE2D_OFST (8)
++#define RG_SSUSB_EQ_RSTEP2_PE2H_OFST (6)
++#define RG_SSUSB_EQ_RSTEP2_PE1D_OFST (4)
++#define RG_SSUSB_EQ_RSTEP2_PE1H_OFST (2)
++#define RG_SSUSB_EQ_RSTEP2_U3_OFST (0)
++
++
++///////////////////////////////////////////////////////////////////////////////
++
++struct u3phyd_reg {
++ //0x0
++ PHY_LE32 phyd_mix0;
++ PHY_LE32 phyd_mix1;
++ PHY_LE32 phyd_lfps0;
++ PHY_LE32 phyd_lfps1;
++ //0x10
++ PHY_LE32 phyd_impcal0;
++ PHY_LE32 phyd_impcal1;
++ PHY_LE32 phyd_txpll0;
++ PHY_LE32 phyd_txpll1;
++ //0x20
++ PHY_LE32 phyd_txpll2;
++ PHY_LE32 phyd_fl0;
++ PHY_LE32 phyd_mix2;
++ PHY_LE32 phyd_rx0;
++ //0x30
++ PHY_LE32 phyd_t2rlb;
++ PHY_LE32 phyd_cppat;
++ PHY_LE32 phyd_mix3;
++ PHY_LE32 phyd_ebufctl;
++ //0x40
++ PHY_LE32 phyd_pipe0;
++ PHY_LE32 phyd_pipe1;
++ PHY_LE32 phyd_mix4;
++ PHY_LE32 phyd_ckgen0;
++ //0x50
++ PHY_LE32 phyd_mix5;
++ PHY_LE32 phyd_reserved;
++ PHY_LE32 phyd_cdr0;
++ PHY_LE32 phyd_cdr1;
++ //0x60
++ PHY_LE32 phyd_pll_0;
++ PHY_LE32 phyd_pll_1;
++ PHY_LE32 phyd_bcn_det_1;
++ PHY_LE32 phyd_bcn_det_2;
++ //0x70
++ PHY_LE32 eq0;
++ PHY_LE32 eq1;
++ PHY_LE32 eq2;
++ PHY_LE32 eq3;
++ //0x80
++ PHY_LE32 eq_eye0;
++ PHY_LE32 eq_eye1;
++ PHY_LE32 eq_eye2;
++ PHY_LE32 eq_dfe0;
++ //0x90
++ PHY_LE32 eq_dfe1;
++ PHY_LE32 eq_dfe2;
++ PHY_LE32 eq_dfe3;
++ PHY_LE32 reserve0;
++ //0xa0
++ PHY_LE32 phyd_mon0;
++ PHY_LE32 phyd_mon1;
++ PHY_LE32 phyd_mon2;
++ PHY_LE32 phyd_mon3;
++ //0xb0
++ PHY_LE32 phyd_mon4;
++ PHY_LE32 phyd_mon5;
++ PHY_LE32 phyd_mon6;
++ PHY_LE32 phyd_mon7;
++ //0xc0
++ PHY_LE32 phya_rx_mon0;
++ PHY_LE32 phya_rx_mon1;
++ PHY_LE32 phya_rx_mon2;
++ PHY_LE32 phya_rx_mon3;
++ //0xd0
++ PHY_LE32 phya_rx_mon4;
++ PHY_LE32 phya_rx_mon5;
++ PHY_LE32 phyd_cppat2;
++ PHY_LE32 eq_eye3;
++ //0xe0
++ PHY_LE32 kband_out;
++ PHY_LE32 kband_out1;
++};
++
++//U3D_PHYD_MIX0
++#define RG_SSUSB_P_P3_TX_NG (0x1<<31) //31:31
++#define RG_SSUSB_TSEQ_EN (0x1<<30) //30:30
++#define RG_SSUSB_TSEQ_POLEN (0x1<<29) //29:29
++#define RG_SSUSB_TSEQ_POL (0x1<<28) //28:28
++#define RG_SSUSB_P_P3_PCLK_NG (0x1<<27) //27:27
++#define RG_SSUSB_TSEQ_TH (0x7<<24) //26:24
++#define RG_SSUSB_PRBS_BERTH (0xff<<16) //23:16
++#define RG_SSUSB_DISABLE_PHY_U2_ON (0x1<<15) //15:15
++#define RG_SSUSB_DISABLE_PHY_U2_OFF (0x1<<14) //14:14
++#define RG_SSUSB_PRBS_EN (0x1<<13) //13:13
++#define RG_SSUSB_BPSLOCK (0x1<<12) //12:12
++#define RG_SSUSB_RTCOMCNT (0xf<<8) //11:8
++#define RG_SSUSB_COMCNT (0xf<<4) //7:4
++#define RG_SSUSB_PRBSEL_CALIB (0xf<<0) //3:0
++
++//U3D_PHYD_MIX1
++#define RG_SSUSB_SLEEP_EN (0x1<<31) //31:31
++#define RG_SSUSB_PRBSEL_PCS (0x7<<28) //30:28
++#define RG_SSUSB_TXLFPS_PRD (0xf<<24) //27:24
++#define RG_SSUSB_P_RX_P0S_CK (0x1<<23) //23:23
++#define RG_SSUSB_P_TX_P0S_CK (0x1<<22) //22:22
++#define RG_SSUSB_PDNCTL (0x3f<<16) //21:16
++#define RG_SSUSB_TX_DRV_EN (0x1<<15) //15:15
++#define RG_SSUSB_TX_DRV_SEL (0x1<<14) //14:14
++#define RG_SSUSB_TX_DRV_DLY (0x3f<<8) //13:8
++#define RG_SSUSB_BERT_EN (0x1<<7) //7:7
++#define RG_SSUSB_SCP_TH (0x7<<4) //6:4
++#define RG_SSUSB_SCP_EN (0x1<<3) //3:3
++#define RG_SSUSB_RXANSIDEC_TEST (0x7<<0) //2:0
++
++//U3D_PHYD_LFPS0
++#define RG_SSUSB_LFPS_PWD (0x1<<30) //30:30
++#define RG_SSUSB_FORCE_LFPS_PWD (0x1<<29) //29:29
++#define RG_SSUSB_RXLFPS_OVF (0x1f<<24) //28:24
++#define RG_SSUSB_P3_ENTRY_SEL (0x1<<23) //23:23
++#define RG_SSUSB_P3_ENTRY (0x1<<22) //22:22
++#define RG_SSUSB_RXLFPS_CDRSEL (0x3<<20) //21:20
++#define RG_SSUSB_RXLFPS_CDRTH (0xf<<16) //19:16
++#define RG_SSUSB_LOCK5G_BLOCK (0x1<<15) //15:15
++#define RG_SSUSB_TFIFO_EXT_D_SEL (0x1<<14) //14:14
++#define RG_SSUSB_TFIFO_NO_EXTEND (0x1<<13) //13:13
++#define RG_SSUSB_RXLFPS_LOB (0x1f<<8) //12:8
++#define RG_SSUSB_TXLFPS_EN (0x1<<7) //7:7
++#define RG_SSUSB_TXLFPS_SEL (0x1<<6) //6:6
++#define RG_SSUSB_RXLFPS_CDRLOCK (0x1<<5) //5:5
++#define RG_SSUSB_RXLFPS_UPB (0x1f<<0) //4:0
++
++//U3D_PHYD_LFPS1
++#define RG_SSUSB_RX_IMP_BIAS (0xf<<28) //31:28
++#define RG_SSUSB_TX_IMP_BIAS (0xf<<24) //27:24
++#define RG_SSUSB_FWAKE_TH (0x3f<<16) //21:16
++#define RG_SSUSB_RXLFPS_UDF (0x1f<<8) //12:8
++#define RG_SSUSB_RXLFPS_P0IDLETH (0xff<<0) //7:0
++
++//U3D_PHYD_IMPCAL0
++#define RG_SSUSB_FORCE_TX_IMPSEL (0x1<<31) //31:31
++#define RG_SSUSB_TX_IMPCAL_EN (0x1<<30) //30:30
++#define RG_SSUSB_FORCE_TX_IMPCAL_EN (0x1<<29) //29:29
++#define RG_SSUSB_TX_IMPSEL (0x1f<<24) //28:24
++#define RG_SSUSB_TX_IMPCAL_CALCYC (0x3f<<16) //21:16
++#define RG_SSUSB_TX_IMPCAL_STBCYC (0x1f<<10) //14:10
++#define RG_SSUSB_TX_IMPCAL_CYCCNT (0x3ff<<0) //9:0
++
++//U3D_PHYD_IMPCAL1
++#define RG_SSUSB_FORCE_RX_IMPSEL (0x1<<31) //31:31
++#define RG_SSUSB_RX_IMPCAL_EN (0x1<<30) //30:30
++#define RG_SSUSB_FORCE_RX_IMPCAL_EN (0x1<<29) //29:29
++#define RG_SSUSB_RX_IMPSEL (0x1f<<24) //28:24
++#define RG_SSUSB_RX_IMPCAL_CALCYC (0x3f<<16) //21:16
++#define RG_SSUSB_RX_IMPCAL_STBCYC (0x1f<<10) //14:10
++#define RG_SSUSB_RX_IMPCAL_CYCCNT (0x3ff<<0) //9:0
++
++//U3D_PHYD_TXPLL0
++#define RG_SSUSB_TXPLL_DDSEN_CYC (0x1f<<27) //31:27
++#define RG_SSUSB_TXPLL_ON (0x1<<26) //26:26
++#define RG_SSUSB_FORCE_TXPLLON (0x1<<25) //25:25
++#define RG_SSUSB_TXPLL_STBCYC (0x1ff<<16) //24:16
++#define RG_SSUSB_TXPLL_NCPOCHG_CYC (0xf<<12) //15:12
++#define RG_SSUSB_TXPLL_NCPOEN_CYC (0x3<<10) //11:10
++#define RG_SSUSB_TXPLL_DDSRSTB_CYC (0x7<<0) //2:0
++
++//U3D_PHYD_TXPLL1
++#define RG_SSUSB_PLL_NCPO_EN (0x1<<31) //31:31
++#define RG_SSUSB_PLL_FIFO_START_MAN (0x1<<30) //30:30
++#define RG_SSUSB_PLL_NCPO_CHG (0x1<<28) //28:28
++#define RG_SSUSB_PLL_DDS_RSTB (0x1<<27) //27:27
++#define RG_SSUSB_PLL_DDS_PWDB (0x1<<26) //26:26
++#define RG_SSUSB_PLL_DDSEN (0x1<<25) //25:25
++#define RG_SSUSB_PLL_AUTOK_VCO (0x1<<24) //24:24
++#define RG_SSUSB_PLL_PWD (0x1<<23) //23:23
++#define RG_SSUSB_RX_AFE_PWD (0x1<<22) //22:22
++#define RG_SSUSB_PLL_TCADJ (0x3f<<16) //21:16
++#define RG_SSUSB_FORCE_CDR_TCADJ (0x1<<15) //15:15
++#define RG_SSUSB_FORCE_CDR_AUTOK_VCO (0x1<<14) //14:14
++#define RG_SSUSB_FORCE_CDR_PWD (0x1<<13) //13:13
++#define RG_SSUSB_FORCE_PLL_NCPO_EN (0x1<<12) //12:12
++#define RG_SSUSB_FORCE_PLL_FIFO_START_MAN (0x1<<11) //11:11
++#define RG_SSUSB_FORCE_PLL_NCPO_CHG (0x1<<9) //9:9
++#define RG_SSUSB_FORCE_PLL_DDS_RSTB (0x1<<8) //8:8
++#define RG_SSUSB_FORCE_PLL_DDS_PWDB (0x1<<7) //7:7
++#define RG_SSUSB_FORCE_PLL_DDSEN (0x1<<6) //6:6
++#define RG_SSUSB_FORCE_PLL_TCADJ (0x1<<5) //5:5
++#define RG_SSUSB_FORCE_PLL_AUTOK_VCO (0x1<<4) //4:4
++#define RG_SSUSB_FORCE_PLL_PWD (0x1<<3) //3:3
++#define RG_SSUSB_FLT_1_DISPERR_B (0x1<<2) //2:2
++
++//U3D_PHYD_TXPLL2
++#define RG_SSUSB_TX_LFPS_EN (0x1<<31) //31:31
++#define RG_SSUSB_FORCE_TX_LFPS_EN (0x1<<30) //30:30
++#define RG_SSUSB_TX_LFPS (0x1<<29) //29:29
++#define RG_SSUSB_FORCE_TX_LFPS (0x1<<28) //28:28
++#define RG_SSUSB_RXPLL_STB (0x1<<27) //27:27
++#define RG_SSUSB_TXPLL_STB (0x1<<26) //26:26
++#define RG_SSUSB_FORCE_RXPLL_STB (0x1<<25) //25:25
++#define RG_SSUSB_FORCE_TXPLL_STB (0x1<<24) //24:24
++#define RG_SSUSB_RXPLL_REFCKSEL (0x1<<16) //16:16
++#define RG_SSUSB_RXPLL_STBMODE (0x1<<11) //11:11
++#define RG_SSUSB_RXPLL_ON (0x1<<10) //10:10
++#define RG_SSUSB_FORCE_RXPLLON (0x1<<9) //9:9
++#define RG_SSUSB_FORCE_RX_AFE_PWD (0x1<<8) //8:8
++#define RG_SSUSB_CDR_AUTOK_VCO (0x1<<7) //7:7
++#define RG_SSUSB_CDR_PWD (0x1<<6) //6:6
++#define RG_SSUSB_CDR_TCADJ (0x3f<<0) //5:0
++
++//U3D_PHYD_FL0
++#define RG_SSUSB_RX_FL_TARGET (0xffff<<16) //31:16
++#define RG_SSUSB_RX_FL_CYCLECNT (0xffff<<0) //15:0
++
++//U3D_PHYD_MIX2
++#define RG_SSUSB_RX_EQ_RST (0x1<<31) //31:31
++#define RG_SSUSB_RX_EQ_RST_SEL (0x1<<30) //30:30
++#define RG_SSUSB_RXVAL_RST (0x1<<29) //29:29
++#define RG_SSUSB_RXVAL_CNT (0x1f<<24) //28:24
++#define RG_SSUSB_CDROS_EN (0x1<<18) //18:18
++#define RG_SSUSB_CDR_LCKOP (0x3<<16) //17:16
++#define RG_SSUSB_RX_FL_LOCKTH (0xf<<8) //11:8
++#define RG_SSUSB_RX_FL_OFFSET (0xff<<0) //7:0
++
++//U3D_PHYD_RX0
++#define RG_SSUSB_T2RLB_BERTH (0xff<<24) //31:24
++#define RG_SSUSB_T2RLB_PAT (0xff<<16) //23:16
++#define RG_SSUSB_T2RLB_EN (0x1<<15) //15:15
++#define RG_SSUSB_T2RLB_BPSCRAMB (0x1<<14) //14:14
++#define RG_SSUSB_T2RLB_SERIAL (0x1<<13) //13:13
++#define RG_SSUSB_T2RLB_MODE (0x3<<11) //12:11
++#define RG_SSUSB_RX_SAOSC_EN (0x1<<10) //10:10
++#define RG_SSUSB_RX_SAOSC_EN_SEL (0x1<<9) //9:9
++#define RG_SSUSB_RX_DFE_OPTION (0x1<<8) //8:8
++#define RG_SSUSB_RX_DFE_EN (0x1<<7) //7:7
++#define RG_SSUSB_RX_DFE_EN_SEL (0x1<<6) //6:6
++#define RG_SSUSB_RX_EQ_EN (0x1<<5) //5:5
++#define RG_SSUSB_RX_EQ_EN_SEL (0x1<<4) //4:4
++#define RG_SSUSB_RX_SAOSC_RST (0x1<<3) //3:3
++#define RG_SSUSB_RX_SAOSC_RST_SEL (0x1<<2) //2:2
++#define RG_SSUSB_RX_DFE_RST (0x1<<1) //1:1
++#define RG_SSUSB_RX_DFE_RST_SEL (0x1<<0) //0:0
++
++//U3D_PHYD_T2RLB
++#define RG_SSUSB_EQTRAIN_CH_MODE (0x1<<28) //28:28
++#define RG_SSUSB_PRB_OUT_CPPAT (0x1<<27) //27:27
++#define RG_SSUSB_BPANSIENC (0x1<<26) //26:26
++#define RG_SSUSB_VALID_EN (0x1<<25) //25:25
++#define RG_SSUSB_EBUF_SRST (0x1<<24) //24:24
++#define RG_SSUSB_K_EMP (0xf<<20) //23:20
++#define RG_SSUSB_K_FUL (0xf<<16) //19:16
++#define RG_SSUSB_T2RLB_BDATRST (0xf<<12) //15:12
++#define RG_SSUSB_P_T2RLB_SKP_EN (0x1<<10) //10:10
++#define RG_SSUSB_T2RLB_PATMODE (0x3<<8) //9:8
++#define RG_SSUSB_T2RLB_TSEQCNT (0xff<<0) //7:0
++
++//U3D_PHYD_CPPAT
++#define RG_SSUSB_CPPAT_PROGRAM_EN (0x1<<24) //24:24
++#define RG_SSUSB_CPPAT_TOZ (0x3<<21) //22:21
++#define RG_SSUSB_CPPAT_PRBS_EN (0x1<<20) //20:20
++#define RG_SSUSB_CPPAT_OUT_TMP2 (0xf<<16) //19:16
++#define RG_SSUSB_CPPAT_OUT_TMP1 (0xff<<8) //15:8
++#define RG_SSUSB_CPPAT_OUT_TMP0 (0xff<<0) //7:0
++
++//U3D_PHYD_MIX3
++#define RG_SSUSB_CDR_TCADJ_MINUS (0x1<<31) //31:31
++#define RG_SSUSB_P_CDROS_EN (0x1<<30) //30:30
++#define RG_SSUSB_P_P2_TX_DRV_DIS (0x1<<28) //28:28
++#define RG_SSUSB_CDR_TCADJ_OFFSET (0x7<<24) //26:24
++#define RG_SSUSB_PLL_TCADJ_MINUS (0x1<<23) //23:23
++#define RG_SSUSB_FORCE_PLL_BIAS_LPF_EN (0x1<<20) //20:20
++#define RG_SSUSB_PLL_BIAS_LPF_EN (0x1<<19) //19:19
++#define RG_SSUSB_PLL_TCADJ_OFFSET (0x7<<16) //18:16
++#define RG_SSUSB_FORCE_PLL_SSCEN (0x1<<15) //15:15
++#define RG_SSUSB_PLL_SSCEN (0x1<<14) //14:14
++#define RG_SSUSB_FORCE_CDR_PI_PWD (0x1<<13) //13:13
++#define RG_SSUSB_CDR_PI_PWD (0x1<<12) //12:12
++#define RG_SSUSB_CDR_PI_MODE (0x1<<11) //11:11
++#define RG_SSUSB_TXPLL_SSCEN_CYC (0x3ff<<0) //9:0
++
++//U3D_PHYD_EBUFCTL
++#define RG_SSUSB_EBUFCTL (0xffffffff<<0) //31:0
++
++//U3D_PHYD_PIPE0
++#define RG_SSUSB_RXTERMINATION (0x1<<30) //30:30
++#define RG_SSUSB_RXEQTRAINING (0x1<<29) //29:29
++#define RG_SSUSB_RXPOLARITY (0x1<<28) //28:28
++#define RG_SSUSB_TXDEEMPH (0x3<<26) //27:26
++#define RG_SSUSB_POWERDOWN (0x3<<24) //25:24
++#define RG_SSUSB_TXONESZEROS (0x1<<23) //23:23
++#define RG_SSUSB_TXELECIDLE (0x1<<22) //22:22
++#define RG_SSUSB_TXDETECTRX (0x1<<21) //21:21
++#define RG_SSUSB_PIPE_SEL (0x1<<20) //20:20
++#define RG_SSUSB_TXDATAK (0xf<<16) //19:16
++#define RG_SSUSB_CDR_STABLE_SEL (0x1<<15) //15:15
++#define RG_SSUSB_CDR_STABLE (0x1<<14) //14:14
++#define RG_SSUSB_CDR_RSTB_SEL (0x1<<13) //13:13
++#define RG_SSUSB_CDR_RSTB (0x1<<12) //12:12
++#define RG_SSUSB_P_ERROR_SEL (0x3<<4) //5:4
++#define RG_SSUSB_TXMARGIN (0x7<<1) //3:1
++#define RG_SSUSB_TXCOMPLIANCE (0x1<<0) //0:0
++
++//U3D_PHYD_PIPE1
++#define RG_SSUSB_TXDATA (0xffffffff<<0) //31:0
++
++//U3D_PHYD_MIX4
++#define RG_SSUSB_CDROS_CNT (0x3f<<24) //29:24
++#define RG_SSUSB_T2RLB_BER_EN (0x1<<16) //16:16
++#define RG_SSUSB_T2RLB_BER_RATE (0xffff<<0) //15:0
++
++//U3D_PHYD_CKGEN0
++#define RG_SSUSB_RFIFO_IMPLAT (0x1<<27) //27:27
++#define RG_SSUSB_TFIFO_PSEL (0x7<<24) //26:24
++#define RG_SSUSB_CKGEN_PSEL (0x3<<8) //9:8
++#define RG_SSUSB_RXCK_INV (0x1<<0) //0:0
++
++//U3D_PHYD_MIX5
++#define RG_SSUSB_PRB_SEL (0xffff<<16) //31:16
++#define RG_SSUSB_RXPLL_STBCYC (0x7ff<<0) //10:0
++
++//U3D_PHYD_RESERVED
++#define RG_SSUSB_PHYD_RESERVE (0xffffffff<<0) //31:0
++//#define RG_SSUSB_RX_SIGDET_SEL (0x1<<11)
++//#define RG_SSUSB_RX_SIGDET_EN (0x1<<12)
++//#define RG_SSUSB_RX_PI_CAL_MANUAL_SEL (0x1<<9)
++//#define RG_SSUSB_RX_PI_CAL_MANUAL_EN (0x1<<10)
++
++//U3D_PHYD_CDR0
++#define RG_SSUSB_CDR_BIC_LTR (0xf<<28) //31:28
++#define RG_SSUSB_CDR_BIC_LTD0 (0xf<<24) //27:24
++#define RG_SSUSB_CDR_BC_LTD1 (0x1f<<16) //20:16
++#define RG_SSUSB_CDR_BC_LTR (0x1f<<8) //12:8
++#define RG_SSUSB_CDR_BC_LTD0 (0x1f<<0) //4:0
++
++//U3D_PHYD_CDR1
++#define RG_SSUSB_CDR_BIR_LTD1 (0x1f<<24) //28:24
++#define RG_SSUSB_CDR_BIR_LTR (0x1f<<16) //20:16
++#define RG_SSUSB_CDR_BIR_LTD0 (0x1f<<8) //12:8
++#define RG_SSUSB_CDR_BW_SEL (0x3<<6) //7:6
++#define RG_SSUSB_CDR_BIC_LTD1 (0xf<<0) //3:0
++
++//U3D_PHYD_PLL_0
++#define RG_SSUSB_FORCE_CDR_BAND_5G (0x1<<28) //28:28
++#define RG_SSUSB_FORCE_CDR_BAND_2P5G (0x1<<27) //27:27
++#define RG_SSUSB_FORCE_PLL_BAND_5G (0x1<<26) //26:26
++#define RG_SSUSB_FORCE_PLL_BAND_2P5G (0x1<<25) //25:25
++#define RG_SSUSB_P_EQ_T_SEL (0x3ff<<15) //24:15
++#define RG_SSUSB_PLL_ISO_EN_CYC (0x3ff<<5) //14:5
++#define RG_SSUSB_PLLBAND_RECAL (0x1<<4) //4:4
++#define RG_SSUSB_PLL_DDS_ISO_EN (0x1<<3) //3:3
++#define RG_SSUSB_FORCE_PLL_DDS_ISO_EN (0x1<<2) //2:2
++#define RG_SSUSB_PLL_DDS_PWR_ON (0x1<<1) //1:1
++#define RG_SSUSB_FORCE_PLL_DDS_PWR_ON (0x1<<0) //0:0
++
++//U3D_PHYD_PLL_1
++#define RG_SSUSB_CDR_BAND_5G (0xff<<24) //31:24
++#define RG_SSUSB_CDR_BAND_2P5G (0xff<<16) //23:16
++#define RG_SSUSB_PLL_BAND_5G (0xff<<8) //15:8
++#define RG_SSUSB_PLL_BAND_2P5G (0xff<<0) //7:0
++
++//U3D_PHYD_BCN_DET_1
++#define RG_SSUSB_P_BCN_OBS_PRD (0xffff<<16) //31:16
++#define RG_SSUSB_U_BCN_OBS_PRD (0xffff<<0) //15:0
++
++//U3D_PHYD_BCN_DET_2
++#define RG_SSUSB_P_BCN_OBS_SEL (0xfff<<16) //27:16
++#define RG_SSUSB_BCN_DET_DIS (0x1<<12) //12:12
++#define RG_SSUSB_U_BCN_OBS_SEL (0xfff<<0) //11:0
++
++//U3D_EQ0
++#define RG_SSUSB_EQ_DLHL_LFI (0x7f<<24) //30:24
++#define RG_SSUSB_EQ_DHHL_LFI (0x7f<<16) //22:16
++#define RG_SSUSB_EQ_DD0HOS_LFI (0x7f<<8) //14:8
++#define RG_SSUSB_EQ_DD0LOS_LFI (0x7f<<0) //6:0
++
++//U3D_EQ1
++#define RG_SSUSB_EQ_DD1HOS_LFI (0x7f<<24) //30:24
++#define RG_SSUSB_EQ_DD1LOS_LFI (0x7f<<16) //22:16
++#define RG_SSUSB_EQ_DE0OS_LFI (0x7f<<8) //14:8
++#define RG_SSUSB_EQ_DE1OS_LFI (0x7f<<0) //6:0
++
++//U3D_EQ2
++#define RG_SSUSB_EQ_DLHLOS_LFI (0x7f<<24) //30:24
++#define RG_SSUSB_EQ_DHHLOS_LFI (0x7f<<16) //22:16
++#define RG_SSUSB_EQ_STOPTIME (0x1<<14) //14:14
++#define RG_SSUSB_EQ_DHHL_LF_SEL (0x7<<11) //13:11
++#define RG_SSUSB_EQ_DSAOS_LF_SEL (0x7<<8) //10:8
++#define RG_SSUSB_EQ_STARTTIME (0x3<<6) //7:6
++#define RG_SSUSB_EQ_DLEQ_LF_SEL (0x7<<3) //5:3
++#define RG_SSUSB_EQ_DLHL_LF_SEL (0x7<<0) //2:0
++
++//U3D_EQ3
++#define RG_SSUSB_EQ_DLEQ_LFI_GEN2 (0xf<<28) //31:28
++#define RG_SSUSB_EQ_DLEQ_LFI_GEN1 (0xf<<24) //27:24
++#define RG_SSUSB_EQ_DEYE0OS_LFI (0x7f<<16) //22:16
++#define RG_SSUSB_EQ_DEYE1OS_LFI (0x7f<<8) //14:8
++#define RG_SSUSB_EQ_TRI_DET_EN (0x1<<7) //7:7
++#define RG_SSUSB_EQ_TRI_DET_TH (0x7f<<0) //6:0
++
++//U3D_EQ_EYE0
++#define RG_SSUSB_EQ_EYE_XOFFSET (0x7f<<25) //31:25
++#define RG_SSUSB_EQ_EYE_MON_EN (0x1<<24) //24:24
++#define RG_SSUSB_EQ_EYE0_Y (0x7f<<16) //22:16
++#define RG_SSUSB_EQ_EYE1_Y (0x7f<<8) //14:8
++#define RG_SSUSB_EQ_PILPO_ROUT (0x1<<7) //7:7
++#define RG_SSUSB_EQ_PI_KPGAIN (0x7<<4) //6:4
++#define RG_SSUSB_EQ_EYE_CNT_EN (0x1<<3) //3:3
++
++//U3D_EQ_EYE1
++#define RG_SSUSB_EQ_SIGDET (0x7f<<24) //30:24
++#define RG_SSUSB_EQ_EYE_MASK (0x3ff<<7) //16:7
++
++//U3D_EQ_EYE2
++#define RG_SSUSB_EQ_RX500M_CK_SEL (0x1<<31) //31:31
++#define RG_SSUSB_EQ_SD_CNT1 (0x3f<<24) //29:24
++#define RG_SSUSB_EQ_ISIFLAG_SEL (0x3<<22) //23:22
++#define RG_SSUSB_EQ_SD_CNT0 (0x3f<<16) //21:16
++
++//U3D_EQ_DFE0
++#define RG_SSUSB_EQ_LEQMAX (0xf<<28) //31:28
++#define RG_SSUSB_EQ_DFEX_EN (0x1<<27) //27:27
++#define RG_SSUSB_EQ_DFEX_LF_SEL (0x7<<24) //26:24
++#define RG_SSUSB_EQ_CHK_EYE_H (0x1<<23) //23:23
++#define RG_SSUSB_EQ_PIEYE_INI (0x7f<<16) //22:16
++#define RG_SSUSB_EQ_PI90_INI (0x7f<<8) //14:8
++#define RG_SSUSB_EQ_PI0_INI (0x7f<<0) //6:0
++
++//U3D_EQ_DFE1
++#define RG_SSUSB_EQ_REV (0xffff<<16) //31:16
++#define RG_SSUSB_EQ_DFEYEN_DUR (0x7<<12) //14:12
++#define RG_SSUSB_EQ_DFEXEN_DUR (0x7<<8) //10:8
++#define RG_SSUSB_EQ_DFEX_RST (0x1<<7) //7:7
++#define RG_SSUSB_EQ_GATED_RXD_B (0x1<<6) //6:6
++#define RG_SSUSB_EQ_PI90CK_SEL (0x3<<4) //5:4
++#define RG_SSUSB_EQ_DFEX_DIS (0x1<<2) //2:2
++#define RG_SSUSB_EQ_DFEYEN_STOP_DIS (0x1<<1) //1:1
++#define RG_SSUSB_EQ_DFEXEN_SEL (0x1<<0) //0:0
++
++//U3D_EQ_DFE2
++#define RG_SSUSB_EQ_MON_SEL (0x1f<<24) //28:24
++#define RG_SSUSB_EQ_LEQOSC_DLYCNT (0x7<<16) //18:16
++#define RG_SSUSB_EQ_DLEQOS_LFI (0x1f<<8) //12:8
++#define RG_SSUSB_EQ_LEQ_STOP_TO (0x3<<0) //1:0
++
++//U3D_EQ_DFE3
++#define RG_SSUSB_EQ_RESERVED (0xffffffff<<0) //31:0
++
++//U3D_PHYD_MON0
++#define RGS_SSUSB_BERT_BERC (0xffff<<16) //31:16
++#define RGS_SSUSB_LFPS (0xf<<12) //15:12
++#define RGS_SSUSB_TRAINDEC (0x7<<8) //10:8
++#define RGS_SSUSB_SCP_PAT (0xff<<0) //7:0
++
++//U3D_PHYD_MON1
++#define RGS_SSUSB_RX_FL_OUT (0xffff<<0) //15:0
++
++//U3D_PHYD_MON2
++#define RGS_SSUSB_T2RLB_ERRCNT (0xffff<<16) //31:16
++#define RGS_SSUSB_RETRACK (0xf<<12) //15:12
++#define RGS_SSUSB_RXPLL_LOCK (0x1<<10) //10:10
++#define RGS_SSUSB_CDR_VCOCAL_CPLT_D (0x1<<9) //9:9
++#define RGS_SSUSB_PLL_VCOCAL_CPLT_D (0x1<<8) //8:8
++#define RGS_SSUSB_PDNCTL (0xff<<0) //7:0
++
++//U3D_PHYD_MON3
++#define RGS_SSUSB_TSEQ_ERRCNT (0xffff<<16) //31:16
++#define RGS_SSUSB_PRBS_ERRCNT (0xffff<<0) //15:0
++
++//U3D_PHYD_MON4
++#define RGS_SSUSB_RX_LSLOCK_CNT (0xf<<24) //27:24
++#define RGS_SSUSB_SCP_DETCNT (0xff<<16) //23:16
++#define RGS_SSUSB_TSEQ_DETCNT (0xffff<<0) //15:0
++
++//U3D_PHYD_MON5
++#define RGS_SSUSB_EBUFMSG (0xffff<<16) //31:16
++#define RGS_SSUSB_BERT_LOCK (0x1<<15) //15:15
++#define RGS_SSUSB_SCP_DET (0x1<<14) //14:14
++#define RGS_SSUSB_TSEQ_DET (0x1<<13) //13:13
++#define RGS_SSUSB_EBUF_UDF (0x1<<12) //12:12
++#define RGS_SSUSB_EBUF_OVF (0x1<<11) //11:11
++#define RGS_SSUSB_PRBS_PASSTH (0x1<<10) //10:10
++#define RGS_SSUSB_PRBS_PASS (0x1<<9) //9:9
++#define RGS_SSUSB_PRBS_LOCK (0x1<<8) //8:8
++#define RGS_SSUSB_T2RLB_ERR (0x1<<6) //6:6
++#define RGS_SSUSB_T2RLB_PASSTH (0x1<<5) //5:5
++#define RGS_SSUSB_T2RLB_PASS (0x1<<4) //4:4
++#define RGS_SSUSB_T2RLB_LOCK (0x1<<3) //3:3
++#define RGS_SSUSB_RX_IMPCAL_DONE (0x1<<2) //2:2
++#define RGS_SSUSB_TX_IMPCAL_DONE (0x1<<1) //1:1
++#define RGS_SSUSB_RXDETECTED (0x1<<0) //0:0
++
++//U3D_PHYD_MON6
++#define RGS_SSUSB_SIGCAL_DONE (0x1<<30) //30:30
++#define RGS_SSUSB_SIGCAL_CAL_OUT (0x1<<29) //29:29
++#define RGS_SSUSB_SIGCAL_OFFSET (0x1f<<24) //28:24
++#define RGS_SSUSB_RX_IMP_SEL (0x1f<<16) //20:16
++#define RGS_SSUSB_TX_IMP_SEL (0x1f<<8) //12:8
++#define RGS_SSUSB_TFIFO_MSG (0xf<<4) //7:4
++#define RGS_SSUSB_RFIFO_MSG (0xf<<0) //3:0
++
++//U3D_PHYD_MON7
++#define RGS_SSUSB_FT_OUT (0xff<<8) //15:8
++#define RGS_SSUSB_PRB_OUT (0xff<<0) //7:0
++
++//U3D_PHYA_RX_MON0
++#define RGS_SSUSB_EQ_DCLEQ (0xf<<24) //27:24
++#define RGS_SSUSB_EQ_DCD0H (0x7f<<16) //22:16
++#define RGS_SSUSB_EQ_DCD0L (0x7f<<8) //14:8
++#define RGS_SSUSB_EQ_DCD1H (0x7f<<0) //6:0
++
++//U3D_PHYA_RX_MON1
++#define RGS_SSUSB_EQ_DCD1L (0x7f<<24) //30:24
++#define RGS_SSUSB_EQ_DCE0 (0x7f<<16) //22:16
++#define RGS_SSUSB_EQ_DCE1 (0x7f<<8) //14:8
++#define RGS_SSUSB_EQ_DCHHL (0x7f<<0) //6:0
++
++//U3D_PHYA_RX_MON2
++#define RGS_SSUSB_EQ_LEQ_STOP (0x1<<31) //31:31
++#define RGS_SSUSB_EQ_DCLHL (0x7f<<24) //30:24
++#define RGS_SSUSB_EQ_STATUS (0xff<<16) //23:16
++#define RGS_SSUSB_EQ_DCEYE0 (0x7f<<8) //14:8
++#define RGS_SSUSB_EQ_DCEYE1 (0x7f<<0) //6:0
++
++//U3D_PHYA_RX_MON3
++#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0 (0xfffff<<0) //19:0
++
++//U3D_PHYA_RX_MON4
++#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1 (0xfffff<<0) //19:0
++
++//U3D_PHYA_RX_MON5
++#define RGS_SSUSB_EQ_DCLEQOS (0x1f<<8) //12:8
++#define RGS_SSUSB_EQ_EYE_CNT_RDY (0x1<<7) //7:7
++#define RGS_SSUSB_EQ_PILPO (0x7f<<0) //6:0
++
++//U3D_PHYD_CPPAT2
++#define RG_SSUSB_CPPAT_OUT_H_TMP2 (0xf<<16) //19:16
++#define RG_SSUSB_CPPAT_OUT_H_TMP1 (0xff<<8) //15:8
++#define RG_SSUSB_CPPAT_OUT_H_TMP0 (0xff<<0) //7:0
++
++//U3D_EQ_EYE3
++#define RG_SSUSB_EQ_LEQ_SHIFT (0x7<<24) //26:24
++#define RG_SSUSB_EQ_EYE_CNT (0xfffff<<0) //19:0
++
++//U3D_KBAND_OUT
++#define RGS_SSUSB_CDR_BAND_5G (0xff<<24) //31:24
++#define RGS_SSUSB_CDR_BAND_2P5G (0xff<<16) //23:16
++#define RGS_SSUSB_PLL_BAND_5G (0xff<<8) //15:8
++#define RGS_SSUSB_PLL_BAND_2P5G (0xff<<0) //7:0
++
++//U3D_KBAND_OUT1
++#define RGS_SSUSB_CDR_VCOCAL_FAIL (0x1<<24) //24:24
++#define RGS_SSUSB_CDR_VCOCAL_STATE (0xff<<16) //23:16
++#define RGS_SSUSB_PLL_VCOCAL_FAIL (0x1<<8) //8:8
++#define RGS_SSUSB_PLL_VCOCAL_STATE (0xff<<0) //7:0
++
++
++/* OFFSET */
++
++//U3D_PHYD_MIX0
++#define RG_SSUSB_P_P3_TX_NG_OFST (31)
++#define RG_SSUSB_TSEQ_EN_OFST (30)
++#define RG_SSUSB_TSEQ_POLEN_OFST (29)
++#define RG_SSUSB_TSEQ_POL_OFST (28)
++#define RG_SSUSB_P_P3_PCLK_NG_OFST (27)
++#define RG_SSUSB_TSEQ_TH_OFST (24)
++#define RG_SSUSB_PRBS_BERTH_OFST (16)
++#define RG_SSUSB_DISABLE_PHY_U2_ON_OFST (15)
++#define RG_SSUSB_DISABLE_PHY_U2_OFF_OFST (14)
++#define RG_SSUSB_PRBS_EN_OFST (13)
++#define RG_SSUSB_BPSLOCK_OFST (12)
++#define RG_SSUSB_RTCOMCNT_OFST (8)
++#define RG_SSUSB_COMCNT_OFST (4)
++#define RG_SSUSB_PRBSEL_CALIB_OFST (0)
++
++//U3D_PHYD_MIX1
++#define RG_SSUSB_SLEEP_EN_OFST (31)
++#define RG_SSUSB_PRBSEL_PCS_OFST (28)
++#define RG_SSUSB_TXLFPS_PRD_OFST (24)
++#define RG_SSUSB_P_RX_P0S_CK_OFST (23)
++#define RG_SSUSB_P_TX_P0S_CK_OFST (22)
++#define RG_SSUSB_PDNCTL_OFST (16)
++#define RG_SSUSB_TX_DRV_EN_OFST (15)
++#define RG_SSUSB_TX_DRV_SEL_OFST (14)
++#define RG_SSUSB_TX_DRV_DLY_OFST (8)
++#define RG_SSUSB_BERT_EN_OFST (7)
++#define RG_SSUSB_SCP_TH_OFST (4)
++#define RG_SSUSB_SCP_EN_OFST (3)
++#define RG_SSUSB_RXANSIDEC_TEST_OFST (0)
++
++//U3D_PHYD_LFPS0
++#define RG_SSUSB_LFPS_PWD_OFST (30)
++#define RG_SSUSB_FORCE_LFPS_PWD_OFST (29)
++#define RG_SSUSB_RXLFPS_OVF_OFST (24)
++#define RG_SSUSB_P3_ENTRY_SEL_OFST (23)
++#define RG_SSUSB_P3_ENTRY_OFST (22)
++#define RG_SSUSB_RXLFPS_CDRSEL_OFST (20)
++#define RG_SSUSB_RXLFPS_CDRTH_OFST (16)
++#define RG_SSUSB_LOCK5G_BLOCK_OFST (15)
++#define RG_SSUSB_TFIFO_EXT_D_SEL_OFST (14)
++#define RG_SSUSB_TFIFO_NO_EXTEND_OFST (13)
++#define RG_SSUSB_RXLFPS_LOB_OFST (8)
++#define RG_SSUSB_TXLFPS_EN_OFST (7)
++#define RG_SSUSB_TXLFPS_SEL_OFST (6)
++#define RG_SSUSB_RXLFPS_CDRLOCK_OFST (5)
++#define RG_SSUSB_RXLFPS_UPB_OFST (0)
++
++//U3D_PHYD_LFPS1
++#define RG_SSUSB_RX_IMP_BIAS_OFST (28)
++#define RG_SSUSB_TX_IMP_BIAS_OFST (24)
++#define RG_SSUSB_FWAKE_TH_OFST (16)
++#define RG_SSUSB_RXLFPS_UDF_OFST (8)
++#define RG_SSUSB_RXLFPS_P0IDLETH_OFST (0)
++
++//U3D_PHYD_IMPCAL0
++#define RG_SSUSB_FORCE_TX_IMPSEL_OFST (31)
++#define RG_SSUSB_TX_IMPCAL_EN_OFST (30)
++#define RG_SSUSB_FORCE_TX_IMPCAL_EN_OFST (29)
++#define RG_SSUSB_TX_IMPSEL_OFST (24)
++#define RG_SSUSB_TX_IMPCAL_CALCYC_OFST (16)
++#define RG_SSUSB_TX_IMPCAL_STBCYC_OFST (10)
++#define RG_SSUSB_TX_IMPCAL_CYCCNT_OFST (0)
++
++//U3D_PHYD_IMPCAL1
++#define RG_SSUSB_FORCE_RX_IMPSEL_OFST (31)
++#define RG_SSUSB_RX_IMPCAL_EN_OFST (30)
++#define RG_SSUSB_FORCE_RX_IMPCAL_EN_OFST (29)
++#define RG_SSUSB_RX_IMPSEL_OFST (24)
++#define RG_SSUSB_RX_IMPCAL_CALCYC_OFST (16)
++#define RG_SSUSB_RX_IMPCAL_STBCYC_OFST (10)
++#define RG_SSUSB_RX_IMPCAL_CYCCNT_OFST (0)
++
++//U3D_PHYD_TXPLL0
++#define RG_SSUSB_TXPLL_DDSEN_CYC_OFST (27)
++#define RG_SSUSB_TXPLL_ON_OFST (26)
++#define RG_SSUSB_FORCE_TXPLLON_OFST (25)
++#define RG_SSUSB_TXPLL_STBCYC_OFST (16)
++#define RG_SSUSB_TXPLL_NCPOCHG_CYC_OFST (12)
++#define RG_SSUSB_TXPLL_NCPOEN_CYC_OFST (10)
++#define RG_SSUSB_TXPLL_DDSRSTB_CYC_OFST (0)
++
++//U3D_PHYD_TXPLL1
++#define RG_SSUSB_PLL_NCPO_EN_OFST (31)
++#define RG_SSUSB_PLL_FIFO_START_MAN_OFST (30)
++#define RG_SSUSB_PLL_NCPO_CHG_OFST (28)
++#define RG_SSUSB_PLL_DDS_RSTB_OFST (27)
++#define RG_SSUSB_PLL_DDS_PWDB_OFST (26)
++#define RG_SSUSB_PLL_DDSEN_OFST (25)
++#define RG_SSUSB_PLL_AUTOK_VCO_OFST (24)
++#define RG_SSUSB_PLL_PWD_OFST (23)
++#define RG_SSUSB_RX_AFE_PWD_OFST (22)
++#define RG_SSUSB_PLL_TCADJ_OFST (16)
++#define RG_SSUSB_FORCE_CDR_TCADJ_OFST (15)
++#define RG_SSUSB_FORCE_CDR_AUTOK_VCO_OFST (14)
++#define RG_SSUSB_FORCE_CDR_PWD_OFST (13)
++#define RG_SSUSB_FORCE_PLL_NCPO_EN_OFST (12)
++#define RG_SSUSB_FORCE_PLL_FIFO_START_MAN_OFST (11)
++#define RG_SSUSB_FORCE_PLL_NCPO_CHG_OFST (9)
++#define RG_SSUSB_FORCE_PLL_DDS_RSTB_OFST (8)
++#define RG_SSUSB_FORCE_PLL_DDS_PWDB_OFST (7)
++#define RG_SSUSB_FORCE_PLL_DDSEN_OFST (6)
++#define RG_SSUSB_FORCE_PLL_TCADJ_OFST (5)
++#define RG_SSUSB_FORCE_PLL_AUTOK_VCO_OFST (4)
++#define RG_SSUSB_FORCE_PLL_PWD_OFST (3)
++#define RG_SSUSB_FLT_1_DISPERR_B_OFST (2)
++
++//U3D_PHYD_TXPLL2
++#define RG_SSUSB_TX_LFPS_EN_OFST (31)
++#define RG_SSUSB_FORCE_TX_LFPS_EN_OFST (30)
++#define RG_SSUSB_TX_LFPS_OFST (29)
++#define RG_SSUSB_FORCE_TX_LFPS_OFST (28)
++#define RG_SSUSB_RXPLL_STB_OFST (27)
++#define RG_SSUSB_TXPLL_STB_OFST (26)
++#define RG_SSUSB_FORCE_RXPLL_STB_OFST (25)
++#define RG_SSUSB_FORCE_TXPLL_STB_OFST (24)
++#define RG_SSUSB_RXPLL_REFCKSEL_OFST (16)
++#define RG_SSUSB_RXPLL_STBMODE_OFST (11)
++#define RG_SSUSB_RXPLL_ON_OFST (10)
++#define RG_SSUSB_FORCE_RXPLLON_OFST (9)
++#define RG_SSUSB_FORCE_RX_AFE_PWD_OFST (8)
++#define RG_SSUSB_CDR_AUTOK_VCO_OFST (7)
++#define RG_SSUSB_CDR_PWD_OFST (6)
++#define RG_SSUSB_CDR_TCADJ_OFST (0)
++
++//U3D_PHYD_FL0
++#define RG_SSUSB_RX_FL_TARGET_OFST (16)
++#define RG_SSUSB_RX_FL_CYCLECNT_OFST (0)
++
++//U3D_PHYD_MIX2
++#define RG_SSUSB_RX_EQ_RST_OFST (31)
++#define RG_SSUSB_RX_EQ_RST_SEL_OFST (30)
++#define RG_SSUSB_RXVAL_RST_OFST (29)
++#define RG_SSUSB_RXVAL_CNT_OFST (24)
++#define RG_SSUSB_CDROS_EN_OFST (18)
++#define RG_SSUSB_CDR_LCKOP_OFST (16)
++#define RG_SSUSB_RX_FL_LOCKTH_OFST (8)
++#define RG_SSUSB_RX_FL_OFFSET_OFST (0)
++
++//U3D_PHYD_RX0
++#define RG_SSUSB_T2RLB_BERTH_OFST (24)
++#define RG_SSUSB_T2RLB_PAT_OFST (16)
++#define RG_SSUSB_T2RLB_EN_OFST (15)
++#define RG_SSUSB_T2RLB_BPSCRAMB_OFST (14)
++#define RG_SSUSB_T2RLB_SERIAL_OFST (13)
++#define RG_SSUSB_T2RLB_MODE_OFST (11)
++#define RG_SSUSB_RX_SAOSC_EN_OFST (10)
++#define RG_SSUSB_RX_SAOSC_EN_SEL_OFST (9)
++#define RG_SSUSB_RX_DFE_OPTION_OFST (8)
++#define RG_SSUSB_RX_DFE_EN_OFST (7)
++#define RG_SSUSB_RX_DFE_EN_SEL_OFST (6)
++#define RG_SSUSB_RX_EQ_EN_OFST (5)
++#define RG_SSUSB_RX_EQ_EN_SEL_OFST (4)
++#define RG_SSUSB_RX_SAOSC_RST_OFST (3)
++#define RG_SSUSB_RX_SAOSC_RST_SEL_OFST (2)
++#define RG_SSUSB_RX_DFE_RST_OFST (1)
++#define RG_SSUSB_RX_DFE_RST_SEL_OFST (0)
++
++//U3D_PHYD_T2RLB
++#define RG_SSUSB_EQTRAIN_CH_MODE_OFST (28)
++#define RG_SSUSB_PRB_OUT_CPPAT_OFST (27)
++#define RG_SSUSB_BPANSIENC_OFST (26)
++#define RG_SSUSB_VALID_EN_OFST (25)
++#define RG_SSUSB_EBUF_SRST_OFST (24)
++#define RG_SSUSB_K_EMP_OFST (20)
++#define RG_SSUSB_K_FUL_OFST (16)
++#define RG_SSUSB_T2RLB_BDATRST_OFST (12)
++#define RG_SSUSB_P_T2RLB_SKP_EN_OFST (10)
++#define RG_SSUSB_T2RLB_PATMODE_OFST (8)
++#define RG_SSUSB_T2RLB_TSEQCNT_OFST (0)
++
++//U3D_PHYD_CPPAT
++#define RG_SSUSB_CPPAT_PROGRAM_EN_OFST (24)
++#define RG_SSUSB_CPPAT_TOZ_OFST (21)
++#define RG_SSUSB_CPPAT_PRBS_EN_OFST (20)
++#define RG_SSUSB_CPPAT_OUT_TMP2_OFST (16)
++#define RG_SSUSB_CPPAT_OUT_TMP1_OFST (8)
++#define RG_SSUSB_CPPAT_OUT_TMP0_OFST (0)
++
++//U3D_PHYD_MIX3
++#define RG_SSUSB_CDR_TCADJ_MINUS_OFST (31)
++#define RG_SSUSB_P_CDROS_EN_OFST (30)
++#define RG_SSUSB_P_P2_TX_DRV_DIS_OFST (28)
++#define RG_SSUSB_CDR_TCADJ_OFFSET_OFST (24)
++#define RG_SSUSB_PLL_TCADJ_MINUS_OFST (23)
++#define RG_SSUSB_FORCE_PLL_BIAS_LPF_EN_OFST (20)
++#define RG_SSUSB_PLL_BIAS_LPF_EN_OFST (19)
++#define RG_SSUSB_PLL_TCADJ_OFFSET_OFST (16)
++#define RG_SSUSB_FORCE_PLL_SSCEN_OFST (15)
++#define RG_SSUSB_PLL_SSCEN_OFST (14)
++#define RG_SSUSB_FORCE_CDR_PI_PWD_OFST (13)
++#define RG_SSUSB_CDR_PI_PWD_OFST (12)
++#define RG_SSUSB_CDR_PI_MODE_OFST (11)
++#define RG_SSUSB_TXPLL_SSCEN_CYC_OFST (0)
++
++//U3D_PHYD_EBUFCTL
++#define RG_SSUSB_EBUFCTL_OFST (0)
++
++//U3D_PHYD_PIPE0
++#define RG_SSUSB_RXTERMINATION_OFST (30)
++#define RG_SSUSB_RXEQTRAINING_OFST (29)
++#define RG_SSUSB_RXPOLARITY_OFST (28)
++#define RG_SSUSB_TXDEEMPH_OFST (26)
++#define RG_SSUSB_POWERDOWN_OFST (24)
++#define RG_SSUSB_TXONESZEROS_OFST (23)
++#define RG_SSUSB_TXELECIDLE_OFST (22)
++#define RG_SSUSB_TXDETECTRX_OFST (21)
++#define RG_SSUSB_PIPE_SEL_OFST (20)
++#define RG_SSUSB_TXDATAK_OFST (16)
++#define RG_SSUSB_CDR_STABLE_SEL_OFST (15)
++#define RG_SSUSB_CDR_STABLE_OFST (14)
++#define RG_SSUSB_CDR_RSTB_SEL_OFST (13)
++#define RG_SSUSB_CDR_RSTB_OFST (12)
++#define RG_SSUSB_P_ERROR_SEL_OFST (4)
++#define RG_SSUSB_TXMARGIN_OFST (1)
++#define RG_SSUSB_TXCOMPLIANCE_OFST (0)
++
++//U3D_PHYD_PIPE1
++#define RG_SSUSB_TXDATA_OFST (0)
++
++//U3D_PHYD_MIX4
++#define RG_SSUSB_CDROS_CNT_OFST (24)
++#define RG_SSUSB_T2RLB_BER_EN_OFST (16)
++#define RG_SSUSB_T2RLB_BER_RATE_OFST (0)
++
++//U3D_PHYD_CKGEN0
++#define RG_SSUSB_RFIFO_IMPLAT_OFST (27)
++#define RG_SSUSB_TFIFO_PSEL_OFST (24)
++#define RG_SSUSB_CKGEN_PSEL_OFST (8)
++#define RG_SSUSB_RXCK_INV_OFST (0)
++
++//U3D_PHYD_MIX5
++#define RG_SSUSB_PRB_SEL_OFST (16)
++#define RG_SSUSB_RXPLL_STBCYC_OFST (0)
++
++//U3D_PHYD_RESERVED
++#define RG_SSUSB_PHYD_RESERVE_OFST (0)
++//#define RG_SSUSB_RX_SIGDET_SEL_OFST (11)
++//#define RG_SSUSB_RX_SIGDET_EN_OFST (12)
++//#define RG_SSUSB_RX_PI_CAL_MANUAL_SEL_OFST (9)
++//#define RG_SSUSB_RX_PI_CAL_MANUAL_EN_OFST (10)
++
++//U3D_PHYD_CDR0
++#define RG_SSUSB_CDR_BIC_LTR_OFST (28)
++#define RG_SSUSB_CDR_BIC_LTD0_OFST (24)
++#define RG_SSUSB_CDR_BC_LTD1_OFST (16)
++#define RG_SSUSB_CDR_BC_LTR_OFST (8)
++#define RG_SSUSB_CDR_BC_LTD0_OFST (0)
++
++//U3D_PHYD_CDR1
++#define RG_SSUSB_CDR_BIR_LTD1_OFST (24)
++#define RG_SSUSB_CDR_BIR_LTR_OFST (16)
++#define RG_SSUSB_CDR_BIR_LTD0_OFST (8)
++#define RG_SSUSB_CDR_BW_SEL_OFST (6)
++#define RG_SSUSB_CDR_BIC_LTD1_OFST (0)
++
++//U3D_PHYD_PLL_0
++#define RG_SSUSB_FORCE_CDR_BAND_5G_OFST (28)
++#define RG_SSUSB_FORCE_CDR_BAND_2P5G_OFST (27)
++#define RG_SSUSB_FORCE_PLL_BAND_5G_OFST (26)
++#define RG_SSUSB_FORCE_PLL_BAND_2P5G_OFST (25)
++#define RG_SSUSB_P_EQ_T_SEL_OFST (15)
++#define RG_SSUSB_PLL_ISO_EN_CYC_OFST (5)
++#define RG_SSUSB_PLLBAND_RECAL_OFST (4)
++#define RG_SSUSB_PLL_DDS_ISO_EN_OFST (3)
++#define RG_SSUSB_FORCE_PLL_DDS_ISO_EN_OFST (2)
++#define RG_SSUSB_PLL_DDS_PWR_ON_OFST (1)
++#define RG_SSUSB_FORCE_PLL_DDS_PWR_ON_OFST (0)
++
++//U3D_PHYD_PLL_1
++#define RG_SSUSB_CDR_BAND_5G_OFST (24)
++#define RG_SSUSB_CDR_BAND_2P5G_OFST (16)
++#define RG_SSUSB_PLL_BAND_5G_OFST (8)
++#define RG_SSUSB_PLL_BAND_2P5G_OFST (0)
++
++//U3D_PHYD_BCN_DET_1
++#define RG_SSUSB_P_BCN_OBS_PRD_OFST (16)
++#define RG_SSUSB_U_BCN_OBS_PRD_OFST (0)
++
++//U3D_PHYD_BCN_DET_2
++#define RG_SSUSB_P_BCN_OBS_SEL_OFST (16)
++#define RG_SSUSB_BCN_DET_DIS_OFST (12)
++#define RG_SSUSB_U_BCN_OBS_SEL_OFST (0)
++
++//U3D_EQ0
++#define RG_SSUSB_EQ_DLHL_LFI_OFST (24)
++#define RG_SSUSB_EQ_DHHL_LFI_OFST (16)
++#define RG_SSUSB_EQ_DD0HOS_LFI_OFST (8)
++#define RG_SSUSB_EQ_DD0LOS_LFI_OFST (0)
++
++//U3D_EQ1
++#define RG_SSUSB_EQ_DD1HOS_LFI_OFST (24)
++#define RG_SSUSB_EQ_DD1LOS_LFI_OFST (16)
++#define RG_SSUSB_EQ_DE0OS_LFI_OFST (8)
++#define RG_SSUSB_EQ_DE1OS_LFI_OFST (0)
++
++//U3D_EQ2
++#define RG_SSUSB_EQ_DLHLOS_LFI_OFST (24)
++#define RG_SSUSB_EQ_DHHLOS_LFI_OFST (16)
++#define RG_SSUSB_EQ_STOPTIME_OFST (14)
++#define RG_SSUSB_EQ_DHHL_LF_SEL_OFST (11)
++#define RG_SSUSB_EQ_DSAOS_LF_SEL_OFST (8)
++#define RG_SSUSB_EQ_STARTTIME_OFST (6)
++#define RG_SSUSB_EQ_DLEQ_LF_SEL_OFST (3)
++#define RG_SSUSB_EQ_DLHL_LF_SEL_OFST (0)
++
++//U3D_EQ3
++#define RG_SSUSB_EQ_DLEQ_LFI_GEN2_OFST (28)
++#define RG_SSUSB_EQ_DLEQ_LFI_GEN1_OFST (24)
++#define RG_SSUSB_EQ_DEYE0OS_LFI_OFST (16)
++#define RG_SSUSB_EQ_DEYE1OS_LFI_OFST (8)
++#define RG_SSUSB_EQ_TRI_DET_EN_OFST (7)
++#define RG_SSUSB_EQ_TRI_DET_TH_OFST (0)
++
++//U3D_EQ_EYE0
++#define RG_SSUSB_EQ_EYE_XOFFSET_OFST (25)
++#define RG_SSUSB_EQ_EYE_MON_EN_OFST (24)
++#define RG_SSUSB_EQ_EYE0_Y_OFST (16)
++#define RG_SSUSB_EQ_EYE1_Y_OFST (8)
++#define RG_SSUSB_EQ_PILPO_ROUT_OFST (7)
++#define RG_SSUSB_EQ_PI_KPGAIN_OFST (4)
++#define RG_SSUSB_EQ_EYE_CNT_EN_OFST (3)
++
++//U3D_EQ_EYE1
++#define RG_SSUSB_EQ_SIGDET_OFST (24)
++#define RG_SSUSB_EQ_EYE_MASK_OFST (7)
++
++//U3D_EQ_EYE2
++#define RG_SSUSB_EQ_RX500M_CK_SEL_OFST (31)
++#define RG_SSUSB_EQ_SD_CNT1_OFST (24)
++#define RG_SSUSB_EQ_ISIFLAG_SEL_OFST (22)
++#define RG_SSUSB_EQ_SD_CNT0_OFST (16)
++
++//U3D_EQ_DFE0
++#define RG_SSUSB_EQ_LEQMAX_OFST (28)
++#define RG_SSUSB_EQ_DFEX_EN_OFST (27)
++#define RG_SSUSB_EQ_DFEX_LF_SEL_OFST (24)
++#define RG_SSUSB_EQ_CHK_EYE_H_OFST (23)
++#define RG_SSUSB_EQ_PIEYE_INI_OFST (16)
++#define RG_SSUSB_EQ_PI90_INI_OFST (8)
++#define RG_SSUSB_EQ_PI0_INI_OFST (0)
++
++//U3D_EQ_DFE1
++#define RG_SSUSB_EQ_REV_OFST (16)
++#define RG_SSUSB_EQ_DFEYEN_DUR_OFST (12)
++#define RG_SSUSB_EQ_DFEXEN_DUR_OFST (8)
++#define RG_SSUSB_EQ_DFEX_RST_OFST (7)
++#define RG_SSUSB_EQ_GATED_RXD_B_OFST (6)
++#define RG_SSUSB_EQ_PI90CK_SEL_OFST (4)
++#define RG_SSUSB_EQ_DFEX_DIS_OFST (2)
++#define RG_SSUSB_EQ_DFEYEN_STOP_DIS_OFST (1)
++#define RG_SSUSB_EQ_DFEXEN_SEL_OFST (0)
++
++//U3D_EQ_DFE2
++#define RG_SSUSB_EQ_MON_SEL_OFST (24)
++#define RG_SSUSB_EQ_LEQOSC_DLYCNT_OFST (16)
++#define RG_SSUSB_EQ_DLEQOS_LFI_OFST (8)
++#define RG_SSUSB_EQ_LEQ_STOP_TO_OFST (0)
++
++//U3D_EQ_DFE3
++#define RG_SSUSB_EQ_RESERVED_OFST (0)
++
++//U3D_PHYD_MON0
++#define RGS_SSUSB_BERT_BERC_OFST (16)
++#define RGS_SSUSB_LFPS_OFST (12)
++#define RGS_SSUSB_TRAINDEC_OFST (8)
++#define RGS_SSUSB_SCP_PAT_OFST (0)
++
++//U3D_PHYD_MON1
++#define RGS_SSUSB_RX_FL_OUT_OFST (0)
++
++//U3D_PHYD_MON2
++#define RGS_SSUSB_T2RLB_ERRCNT_OFST (16)
++#define RGS_SSUSB_RETRACK_OFST (12)
++#define RGS_SSUSB_RXPLL_LOCK_OFST (10)
++#define RGS_SSUSB_CDR_VCOCAL_CPLT_D_OFST (9)
++#define RGS_SSUSB_PLL_VCOCAL_CPLT_D_OFST (8)
++#define RGS_SSUSB_PDNCTL_OFST (0)
++
++//U3D_PHYD_MON3
++#define RGS_SSUSB_TSEQ_ERRCNT_OFST (16)
++#define RGS_SSUSB_PRBS_ERRCNT_OFST (0)
++
++//U3D_PHYD_MON4
++#define RGS_SSUSB_RX_LSLOCK_CNT_OFST (24)
++#define RGS_SSUSB_SCP_DETCNT_OFST (16)
++#define RGS_SSUSB_TSEQ_DETCNT_OFST (0)
++
++//U3D_PHYD_MON5
++#define RGS_SSUSB_EBUFMSG_OFST (16)
++#define RGS_SSUSB_BERT_LOCK_OFST (15)
++#define RGS_SSUSB_SCP_DET_OFST (14)
++#define RGS_SSUSB_TSEQ_DET_OFST (13)
++#define RGS_SSUSB_EBUF_UDF_OFST (12)
++#define RGS_SSUSB_EBUF_OVF_OFST (11)
++#define RGS_SSUSB_PRBS_PASSTH_OFST (10)
++#define RGS_SSUSB_PRBS_PASS_OFST (9)
++#define RGS_SSUSB_PRBS_LOCK_OFST (8)
++#define RGS_SSUSB_T2RLB_ERR_OFST (6)
++#define RGS_SSUSB_T2RLB_PASSTH_OFST (5)
++#define RGS_SSUSB_T2RLB_PASS_OFST (4)
++#define RGS_SSUSB_T2RLB_LOCK_OFST (3)
++#define RGS_SSUSB_RX_IMPCAL_DONE_OFST (2)
++#define RGS_SSUSB_TX_IMPCAL_DONE_OFST (1)
++#define RGS_SSUSB_RXDETECTED_OFST (0)
++
++//U3D_PHYD_MON6
++#define RGS_SSUSB_SIGCAL_DONE_OFST (30)
++#define RGS_SSUSB_SIGCAL_CAL_OUT_OFST (29)
++#define RGS_SSUSB_SIGCAL_OFFSET_OFST (24)
++#define RGS_SSUSB_RX_IMP_SEL_OFST (16)
++#define RGS_SSUSB_TX_IMP_SEL_OFST (8)
++#define RGS_SSUSB_TFIFO_MSG_OFST (4)
++#define RGS_SSUSB_RFIFO_MSG_OFST (0)
++
++//U3D_PHYD_MON7
++#define RGS_SSUSB_FT_OUT_OFST (8)
++#define RGS_SSUSB_PRB_OUT_OFST (0)
++
++//U3D_PHYA_RX_MON0
++#define RGS_SSUSB_EQ_DCLEQ_OFST (24)
++#define RGS_SSUSB_EQ_DCD0H_OFST (16)
++#define RGS_SSUSB_EQ_DCD0L_OFST (8)
++#define RGS_SSUSB_EQ_DCD1H_OFST (0)
++
++//U3D_PHYA_RX_MON1
++#define RGS_SSUSB_EQ_DCD1L_OFST (24)
++#define RGS_SSUSB_EQ_DCE0_OFST (16)
++#define RGS_SSUSB_EQ_DCE1_OFST (8)
++#define RGS_SSUSB_EQ_DCHHL_OFST (0)
++
++//U3D_PHYA_RX_MON2
++#define RGS_SSUSB_EQ_LEQ_STOP_OFST (31)
++#define RGS_SSUSB_EQ_DCLHL_OFST (24)
++#define RGS_SSUSB_EQ_STATUS_OFST (16)
++#define RGS_SSUSB_EQ_DCEYE0_OFST (8)
++#define RGS_SSUSB_EQ_DCEYE1_OFST (0)
++
++//U3D_PHYA_RX_MON3
++#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0_OFST (0)
++
++//U3D_PHYA_RX_MON4
++#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1_OFST (0)
++
++//U3D_PHYA_RX_MON5
++#define RGS_SSUSB_EQ_DCLEQOS_OFST (8)
++#define RGS_SSUSB_EQ_EYE_CNT_RDY_OFST (7)
++#define RGS_SSUSB_EQ_PILPO_OFST (0)
++
++//U3D_PHYD_CPPAT2
++#define RG_SSUSB_CPPAT_OUT_H_TMP2_OFST (16)
++#define RG_SSUSB_CPPAT_OUT_H_TMP1_OFST (8)
++#define RG_SSUSB_CPPAT_OUT_H_TMP0_OFST (0)
++
++//U3D_EQ_EYE3
++#define RG_SSUSB_EQ_LEQ_SHIFT_OFST (24)
++#define RG_SSUSB_EQ_EYE_CNT_OFST (0)
++
++//U3D_KBAND_OUT
++#define RGS_SSUSB_CDR_BAND_5G_OFST (24)
++#define RGS_SSUSB_CDR_BAND_2P5G_OFST (16)
++#define RGS_SSUSB_PLL_BAND_5G_OFST (8)
++#define RGS_SSUSB_PLL_BAND_2P5G_OFST (0)
++
++//U3D_KBAND_OUT1
++#define RGS_SSUSB_CDR_VCOCAL_FAIL_OFST (24)
++#define RGS_SSUSB_CDR_VCOCAL_STATE_OFST (16)
++#define RGS_SSUSB_PLL_VCOCAL_FAIL_OFST (8)
++#define RGS_SSUSB_PLL_VCOCAL_STATE_OFST (0)
++
++
++///////////////////////////////////////////////////////////////////////////////
++
++struct u3phyd_bank2_reg {
++ //0x0
++ PHY_LE32 b2_phyd_top1;
++ PHY_LE32 b2_phyd_top2;
++ PHY_LE32 b2_phyd_top3;
++ PHY_LE32 b2_phyd_top4;
++ //0x10
++ PHY_LE32 b2_phyd_top5;
++ PHY_LE32 b2_phyd_top6;
++ PHY_LE32 b2_phyd_top7;
++ PHY_LE32 b2_phyd_p_sigdet1;
++ //0x20
++ PHY_LE32 b2_phyd_p_sigdet2;
++ PHY_LE32 b2_phyd_p_sigdet_cal1;
++ PHY_LE32 b2_phyd_rxdet1;
++ PHY_LE32 b2_phyd_rxdet2;
++ //0x30
++ PHY_LE32 b2_phyd_misc0;
++ PHY_LE32 b2_phyd_misc2;
++ PHY_LE32 b2_phyd_misc3;
++ PHY_LE32 reserve0;
++ //0x40
++ PHY_LE32 b2_rosc_0;
++ PHY_LE32 b2_rosc_1;
++ PHY_LE32 b2_rosc_2;
++ PHY_LE32 b2_rosc_3;
++ //0x50
++ PHY_LE32 b2_rosc_4;
++ PHY_LE32 b2_rosc_5;
++ PHY_LE32 b2_rosc_6;
++ PHY_LE32 b2_rosc_7;
++ //0x60
++ PHY_LE32 b2_rosc_8;
++ PHY_LE32 b2_rosc_9;
++ PHY_LE32 b2_rosc_a;
++ PHY_LE32 reserve1;
++ //0x70~0xd0
++ PHY_LE32 reserve2[28];
++ //0xe0
++ PHY_LE32 phyd_version;
++ PHY_LE32 phyd_model;
++};
++
++//U3D_B2_PHYD_TOP1
++#define RG_SSUSB_PCIE2_K_EMP (0xf<<28) //31:28
++#define RG_SSUSB_PCIE2_K_FUL (0xf<<24) //27:24
++#define RG_SSUSB_TX_EIDLE_LP_EN (0x1<<17) //17:17
++#define RG_SSUSB_FORCE_TX_EIDLE_LP_EN (0x1<<16) //16:16
++#define RG_SSUSB_SIGDET_EN (0x1<<15) //15:15
++#define RG_SSUSB_FORCE_SIGDET_EN (0x1<<14) //14:14
++#define RG_SSUSB_CLKRX_EN (0x1<<13) //13:13
++#define RG_SSUSB_FORCE_CLKRX_EN (0x1<<12) //12:12
++#define RG_SSUSB_CLKTX_EN (0x1<<11) //11:11
++#define RG_SSUSB_FORCE_CLKTX_EN (0x1<<10) //10:10
++#define RG_SSUSB_CLK_REQ_N_I (0x1<<9) //9:9
++#define RG_SSUSB_FORCE_CLK_REQ_N_I (0x1<<8) //8:8
++#define RG_SSUSB_RATE (0x1<<6) //6:6
++#define RG_SSUSB_FORCE_RATE (0x1<<5) //5:5
++#define RG_SSUSB_PCIE_MODE_SEL (0x1<<4) //4:4
++#define RG_SSUSB_FORCE_PCIE_MODE_SEL (0x1<<3) //3:3
++#define RG_SSUSB_PHY_MODE (0x3<<1) //2:1
++#define RG_SSUSB_FORCE_PHY_MODE (0x1<<0) //0:0
++
++//U3D_B2_PHYD_TOP2
++#define RG_SSUSB_FORCE_IDRV_6DB (0x1<<30) //30:30
++#define RG_SSUSB_IDRV_6DB (0x3f<<24) //29:24
++#define RG_SSUSB_FORCE_IDEM_3P5DB (0x1<<22) //22:22
++#define RG_SSUSB_IDEM_3P5DB (0x3f<<16) //21:16
++#define RG_SSUSB_FORCE_IDRV_3P5DB (0x1<<14) //14:14
++#define RG_SSUSB_IDRV_3P5DB (0x3f<<8) //13:8
++#define RG_SSUSB_FORCE_IDRV_0DB (0x1<<6) //6:6
++#define RG_SSUSB_IDRV_0DB (0x3f<<0) //5:0
++
++//U3D_B2_PHYD_TOP3
++#define RG_SSUSB_TX_BIASI (0x7<<25) //27:25
++#define RG_SSUSB_FORCE_TX_BIASI_EN (0x1<<24) //24:24
++#define RG_SSUSB_TX_BIASI_EN (0x1<<16) //16:16
++#define RG_SSUSB_FORCE_TX_BIASI (0x1<<13) //13:13
++#define RG_SSUSB_FORCE_IDEM_6DB (0x1<<8) //8:8
++#define RG_SSUSB_IDEM_6DB (0x3f<<0) //5:0
++
++//U3D_B2_PHYD_TOP4
++#define RG_SSUSB_G1_CDR_BIC_LTR (0xf<<28) //31:28
++#define RG_SSUSB_G1_CDR_BIC_LTD0 (0xf<<24) //27:24
++#define RG_SSUSB_G1_CDR_BC_LTD1 (0x1f<<16) //20:16
++#define RG_SSUSB_G1_CDR_BC_LTR (0x1f<<8) //12:8
++#define RG_SSUSB_G1_CDR_BC_LTD0 (0x1f<<0) //4:0
++
++//U3D_B2_PHYD_TOP5
++#define RG_SSUSB_G1_CDR_BIR_LTD1 (0x1f<<24) //28:24
++#define RG_SSUSB_G1_CDR_BIR_LTR (0x1f<<16) //20:16
++#define RG_SSUSB_G1_CDR_BIR_LTD0 (0x1f<<8) //12:8
++#define RG_SSUSB_G1_CDR_BIC_LTD1 (0xf<<0) //3:0
++
++//U3D_B2_PHYD_TOP6
++#define RG_SSUSB_G2_CDR_BIC_LTR (0xf<<28) //31:28
++#define RG_SSUSB_G2_CDR_BIC_LTD0 (0xf<<24) //27:24
++#define RG_SSUSB_G2_CDR_BC_LTD1 (0x1f<<16) //20:16
++#define RG_SSUSB_G2_CDR_BC_LTR (0x1f<<8) //12:8
++#define RG_SSUSB_G2_CDR_BC_LTD0 (0x1f<<0) //4:0
++
++//U3D_B2_PHYD_TOP7
++#define RG_SSUSB_G2_CDR_BIR_LTD1 (0x1f<<24) //28:24
++#define RG_SSUSB_G2_CDR_BIR_LTR (0x1f<<16) //20:16
++#define RG_SSUSB_G2_CDR_BIR_LTD0 (0x1f<<8) //12:8
++#define RG_SSUSB_G2_CDR_BIC_LTD1 (0xf<<0) //3:0
++
++//U3D_B2_PHYD_P_SIGDET1
++#define RG_SSUSB_P_SIGDET_FLT_DIS (0x1<<31) //31:31
++#define RG_SSUSB_P_SIGDET_FLT_G2_DEAST_SEL (0x7f<<24) //30:24
++#define RG_SSUSB_P_SIGDET_FLT_G1_DEAST_SEL (0x7f<<16) //22:16
++#define RG_SSUSB_P_SIGDET_FLT_P2_AST_SEL (0x7f<<8) //14:8
++#define RG_SSUSB_P_SIGDET_FLT_PX_AST_SEL (0x7f<<0) //6:0
++
++//U3D_B2_PHYD_P_SIGDET2
++#define RG_SSUSB_P_SIGDET_RX_VAL_S (0x1<<29) //29:29
++#define RG_SSUSB_P_SIGDET_L0S_DEAS_SEL (0x1<<28) //28:28
++#define RG_SSUSB_P_SIGDET_L0_EXIT_S (0x1<<27) //27:27
++#define RG_SSUSB_P_SIGDET_L0S_EXIT_T_S (0x3<<25) //26:25
++#define RG_SSUSB_P_SIGDET_L0S_EXIT_S (0x1<<24) //24:24
++#define RG_SSUSB_P_SIGDET_L0S_ENTRY_S (0x1<<16) //16:16
++#define RG_SSUSB_P_SIGDET_PRB_SEL (0x1<<10) //10:10
++#define RG_SSUSB_P_SIGDET_BK_SIG_T (0x3<<8) //9:8
++#define RG_SSUSB_P_SIGDET_P2_RXLFPS (0x1<<6) //6:6
++#define RG_SSUSB_P_SIGDET_NON_BK_AD (0x1<<5) //5:5
++#define RG_SSUSB_P_SIGDET_BK_B_RXEQ (0x1<<4) //4:4
++#define RG_SSUSB_P_SIGDET_G2_KO_SEL (0x3<<2) //3:2
++#define RG_SSUSB_P_SIGDET_G1_KO_SEL (0x3<<0) //1:0
++
++//U3D_B2_PHYD_P_SIGDET_CAL1
++#define RG_SSUSB_P_SIGDET_CAL_OFFSET (0x1f<<24) //28:24
++#define RG_SSUSB_P_FORCE_SIGDET_CAL_OFFSET (0x1<<16) //16:16
++#define RG_SSUSB_P_SIGDET_CAL_EN (0x1<<8) //8:8
++#define RG_SSUSB_P_FORCE_SIGDET_CAL_EN (0x1<<3) //3:3
++#define RG_SSUSB_P_SIGDET_FLT_EN (0x1<<2) //2:2
++#define RG_SSUSB_P_SIGDET_SAMPLE_PRD (0x1<<1) //1:1
++#define RG_SSUSB_P_SIGDET_REK (0x1<<0) //0:0
++
++//U3D_B2_PHYD_RXDET1
++#define RG_SSUSB_RXDET_PRB_SEL (0x1<<31) //31:31
++#define RG_SSUSB_FORCE_CMDET (0x1<<30) //30:30
++#define RG_SSUSB_RXDET_EN (0x1<<29) //29:29
++#define RG_SSUSB_FORCE_RXDET_EN (0x1<<28) //28:28
++#define RG_SSUSB_RXDET_K_TWICE (0x1<<27) //27:27
++#define RG_SSUSB_RXDET_STB3_SET (0x1ff<<18) //26:18
++#define RG_SSUSB_RXDET_STB2_SET (0x1ff<<9) //17:9
++#define RG_SSUSB_RXDET_STB1_SET (0x1ff<<0) //8:0
++
++//U3D_B2_PHYD_RXDET2
++#define RG_SSUSB_PHYD_TRAINDEC_FORCE_CGEN (0x1<<31) //31:31
++#define RG_SSUSB_PHYD_BERTLB_FORCE_CGEN (0x1<<30) //30:30
++#define RG_SSUSB_PHYD_T2RLB_FORCE_CGEN (0x1<<29) //29:29
++#define RG_SSUSB_PDN_T_SEL (0x3<<18) //19:18
++#define RG_SSUSB_RXDET_STB3_SET_P3 (0x1ff<<9) //17:9
++#define RG_SSUSB_RXDET_STB2_SET_P3 (0x1ff<<0) //8:0
++
++//U3D_B2_PHYD_MISC0
++#define RG_SSUSB_FORCE_PLL_DDS_HF_EN (0x1<<22) //22:22
++#define RG_SSUSB_PLL_DDS_HF_EN_MAN (0x1<<21) //21:21
++#define RG_SSUSB_RXLFPS_ENTXDRV (0x1<<20) //20:20
++#define RG_SSUSB_RX_FL_UNLOCKTH (0xf<<16) //19:16
++#define RG_SSUSB_LFPS_PSEL (0x1<<15) //15:15
++#define RG_SSUSB_RX_SIGDET_EN (0x1<<14) //14:14
++#define RG_SSUSB_RX_SIGDET_EN_SEL (0x1<<13) //13:13
++#define RG_SSUSB_RX_PI_CAL_EN (0x1<<12) //12:12
++#define RG_SSUSB_RX_PI_CAL_EN_SEL (0x1<<11) //11:11
++#define RG_SSUSB_P3_CLS_CK_SEL (0x1<<10) //10:10
++#define RG_SSUSB_T2RLB_PSEL (0x3<<8) //9:8
++#define RG_SSUSB_PPCTL_PSEL (0x7<<5) //7:5
++#define RG_SSUSB_PHYD_TX_DATA_INV (0x1<<4) //4:4
++#define RG_SSUSB_BERTLB_PSEL (0x3<<2) //3:2
++#define RG_SSUSB_RETRACK_DIS (0x1<<1) //1:1
++#define RG_SSUSB_PPERRCNT_CLR (0x1<<0) //0:0
++
++//U3D_B2_PHYD_MISC2
++#define RG_SSUSB_FRC_PLL_DDS_PREDIV2 (0x1<<31) //31:31
++#define RG_SSUSB_FRC_PLL_DDS_IADJ (0xf<<27) //30:27
++#define RG_SSUSB_P_SIGDET_125FILTER (0x1<<26) //26:26
++#define RG_SSUSB_P_SIGDET_RST_FILTER (0x1<<25) //25:25
++#define RG_SSUSB_P_SIGDET_EID_USE_RAW (0x1<<24) //24:24
++#define RG_SSUSB_P_SIGDET_LTD_USE_RAW (0x1<<23) //23:23
++#define RG_SSUSB_EIDLE_BF_RXDET (0x1<<22) //22:22
++#define RG_SSUSB_EIDLE_LP_STBCYC (0x1ff<<13) //21:13
++#define RG_SSUSB_TX_EIDLE_LP_POSTDLY (0x3f<<7) //12:7
++#define RG_SSUSB_TX_EIDLE_LP_PREDLY (0x3f<<1) //6:1
++#define RG_SSUSB_TX_EIDLE_LP_EN_ADV (0x1<<0) //0:0
++
++//U3D_B2_PHYD_MISC3
++#define RGS_SSUSB_DDS_CALIB_C_STATE (0x7<<16) //18:16
++#define RGS_SSUSB_PPERRCNT (0xffff<<0) //15:0
++
++//U3D_B2_ROSC_0
++#define RG_SSUSB_RING_OSC_CNTEND (0x1ff<<23) //31:23
++#define RG_SSUSB_XTAL_OSC_CNTEND (0x7f<<16) //22:16
++#define RG_SSUSB_RING_OSC_EN (0x1<<3) //3:3
++#define RG_SSUSB_RING_OSC_FORCE_EN (0x1<<2) //2:2
++#define RG_SSUSB_FRC_RING_BYPASS_DET (0x1<<1) //1:1
++#define RG_SSUSB_RING_BYPASS_DET (0x1<<0) //0:0
++
++//U3D_B2_ROSC_1
++#define RG_SSUSB_RING_OSC_FRC_P3 (0x1<<20) //20:20
++#define RG_SSUSB_RING_OSC_P3 (0x1<<19) //19:19
++#define RG_SSUSB_RING_OSC_FRC_RECAL (0x3<<17) //18:17
++#define RG_SSUSB_RING_OSC_RECAL (0x1<<16) //16:16
++#define RG_SSUSB_RING_OSC_SEL (0xff<<8) //15:8
++#define RG_SSUSB_RING_OSC_FRC_SEL (0x1<<0) //0:0
++
++//U3D_B2_ROSC_2
++#define RG_SSUSB_RING_DET_STRCYC2 (0xffff<<16) //31:16
++#define RG_SSUSB_RING_DET_STRCYC1 (0xffff<<0) //15:0
++
++//U3D_B2_ROSC_3
++#define RG_SSUSB_RING_DET_DETWIN1 (0xffff<<16) //31:16
++#define RG_SSUSB_RING_DET_STRCYC3 (0xffff<<0) //15:0
++
++//U3D_B2_ROSC_4
++#define RG_SSUSB_RING_DET_DETWIN3 (0xffff<<16) //31:16
++#define RG_SSUSB_RING_DET_DETWIN2 (0xffff<<0) //15:0
++
++//U3D_B2_ROSC_5
++#define RG_SSUSB_RING_DET_LBOND1 (0xffff<<16) //31:16
++#define RG_SSUSB_RING_DET_UBOND1 (0xffff<<0) //15:0
++
++//U3D_B2_ROSC_6
++#define RG_SSUSB_RING_DET_LBOND2 (0xffff<<16) //31:16
++#define RG_SSUSB_RING_DET_UBOND2 (0xffff<<0) //15:0
++
++//U3D_B2_ROSC_7
++#define RG_SSUSB_RING_DET_LBOND3 (0xffff<<16) //31:16
++#define RG_SSUSB_RING_DET_UBOND3 (0xffff<<0) //15:0
++
++//U3D_B2_ROSC_8
++#define RG_SSUSB_RING_RESERVE (0xffff<<16) //31:16
++#define RG_SSUSB_ROSC_PROB_SEL (0xf<<2) //5:2
++#define RG_SSUSB_RING_FREQMETER_EN (0x1<<1) //1:1
++#define RG_SSUSB_RING_DET_BPS_UBOND (0x1<<0) //0:0
++
++//U3D_B2_ROSC_9
++#define RGS_FM_RING_CNT (0xffff<<16) //31:16
++#define RGS_SSUSB_RING_OSC_STATE (0x3<<10) //11:10
++#define RGS_SSUSB_RING_OSC_STABLE (0x1<<9) //9:9
++#define RGS_SSUSB_RING_OSC_CAL_FAIL (0x1<<8) //8:8
++#define RGS_SSUSB_RING_OSC_CAL (0xff<<0) //7:0
++
++//U3D_B2_ROSC_A
++#define RGS_SSUSB_ROSC_PROB_OUT (0xff<<0) //7:0
++
++//U3D_PHYD_VERSION
++#define RGS_SSUSB_PHYD_VERSION (0xffffffff<<0) //31:0
++
++//U3D_PHYD_MODEL
++#define RGS_SSUSB_PHYD_MODEL (0xffffffff<<0) //31:0
++
++
++/* OFFSET */
++
++//U3D_B2_PHYD_TOP1
++#define RG_SSUSB_PCIE2_K_EMP_OFST (28)
++#define RG_SSUSB_PCIE2_K_FUL_OFST (24)
++#define RG_SSUSB_TX_EIDLE_LP_EN_OFST (17)
++#define RG_SSUSB_FORCE_TX_EIDLE_LP_EN_OFST (16)
++#define RG_SSUSB_SIGDET_EN_OFST (15)
++#define RG_SSUSB_FORCE_SIGDET_EN_OFST (14)
++#define RG_SSUSB_CLKRX_EN_OFST (13)
++#define RG_SSUSB_FORCE_CLKRX_EN_OFST (12)
++#define RG_SSUSB_CLKTX_EN_OFST (11)
++#define RG_SSUSB_FORCE_CLKTX_EN_OFST (10)
++#define RG_SSUSB_CLK_REQ_N_I_OFST (9)
++#define RG_SSUSB_FORCE_CLK_REQ_N_I_OFST (8)
++#define RG_SSUSB_RATE_OFST (6)
++#define RG_SSUSB_FORCE_RATE_OFST (5)
++#define RG_SSUSB_PCIE_MODE_SEL_OFST (4)
++#define RG_SSUSB_FORCE_PCIE_MODE_SEL_OFST (3)
++#define RG_SSUSB_PHY_MODE_OFST (1)
++#define RG_SSUSB_FORCE_PHY_MODE_OFST (0)
++
++//U3D_B2_PHYD_TOP2
++#define RG_SSUSB_FORCE_IDRV_6DB_OFST (30)
++#define RG_SSUSB_IDRV_6DB_OFST (24)
++#define RG_SSUSB_FORCE_IDEM_3P5DB_OFST (22)
++#define RG_SSUSB_IDEM_3P5DB_OFST (16)
++#define RG_SSUSB_FORCE_IDRV_3P5DB_OFST (14)
++#define RG_SSUSB_IDRV_3P5DB_OFST (8)
++#define RG_SSUSB_FORCE_IDRV_0DB_OFST (6)
++#define RG_SSUSB_IDRV_0DB_OFST (0)
++
++//U3D_B2_PHYD_TOP3
++#define RG_SSUSB_TX_BIASI_OFST (25)
++#define RG_SSUSB_FORCE_TX_BIASI_EN_OFST (24)
++#define RG_SSUSB_TX_BIASI_EN_OFST (16)
++#define RG_SSUSB_FORCE_TX_BIASI_OFST (13)
++#define RG_SSUSB_FORCE_IDEM_6DB_OFST (8)
++#define RG_SSUSB_IDEM_6DB_OFST (0)
++
++//U3D_B2_PHYD_TOP4
++#define RG_SSUSB_G1_CDR_BIC_LTR_OFST (28)
++#define RG_SSUSB_G1_CDR_BIC_LTD0_OFST (24)
++#define RG_SSUSB_G1_CDR_BC_LTD1_OFST (16)
++#define RG_SSUSB_G1_CDR_BC_LTR_OFST (8)
++#define RG_SSUSB_G1_CDR_BC_LTD0_OFST (0)
++
++//U3D_B2_PHYD_TOP5
++#define RG_SSUSB_G1_CDR_BIR_LTD1_OFST (24)
++#define RG_SSUSB_G1_CDR_BIR_LTR_OFST (16)
++#define RG_SSUSB_G1_CDR_BIR_LTD0_OFST (8)
++#define RG_SSUSB_G1_CDR_BIC_LTD1_OFST (0)
++
++//U3D_B2_PHYD_TOP6
++#define RG_SSUSB_G2_CDR_BIC_LTR_OFST (28)
++#define RG_SSUSB_G2_CDR_BIC_LTD0_OFST (24)
++#define RG_SSUSB_G2_CDR_BC_LTD1_OFST (16)
++#define RG_SSUSB_G2_CDR_BC_LTR_OFST (8)
++#define RG_SSUSB_G2_CDR_BC_LTD0_OFST (0)
++
++//U3D_B2_PHYD_TOP7
++#define RG_SSUSB_G2_CDR_BIR_LTD1_OFST (24)
++#define RG_SSUSB_G2_CDR_BIR_LTR_OFST (16)
++#define RG_SSUSB_G2_CDR_BIR_LTD0_OFST (8)
++#define RG_SSUSB_G2_CDR_BIC_LTD1_OFST (0)
++
++//U3D_B2_PHYD_P_SIGDET1
++#define RG_SSUSB_P_SIGDET_FLT_DIS_OFST (31)
++#define RG_SSUSB_P_SIGDET_FLT_G2_DEAST_SEL_OFST (24)
++#define RG_SSUSB_P_SIGDET_FLT_G1_DEAST_SEL_OFST (16)
++#define RG_SSUSB_P_SIGDET_FLT_P2_AST_SEL_OFST (8)
++#define RG_SSUSB_P_SIGDET_FLT_PX_AST_SEL_OFST (0)
++
++//U3D_B2_PHYD_P_SIGDET2
++#define RG_SSUSB_P_SIGDET_RX_VAL_S_OFST (29)
++#define RG_SSUSB_P_SIGDET_L0S_DEAS_SEL_OFST (28)
++#define RG_SSUSB_P_SIGDET_L0_EXIT_S_OFST (27)
++#define RG_SSUSB_P_SIGDET_L0S_EXIT_T_S_OFST (25)
++#define RG_SSUSB_P_SIGDET_L0S_EXIT_S_OFST (24)
++#define RG_SSUSB_P_SIGDET_L0S_ENTRY_S_OFST (16)
++#define RG_SSUSB_P_SIGDET_PRB_SEL_OFST (10)
++#define RG_SSUSB_P_SIGDET_BK_SIG_T_OFST (8)
++#define RG_SSUSB_P_SIGDET_P2_RXLFPS_OFST (6)
++#define RG_SSUSB_P_SIGDET_NON_BK_AD_OFST (5)
++#define RG_SSUSB_P_SIGDET_BK_B_RXEQ_OFST (4)
++#define RG_SSUSB_P_SIGDET_G2_KO_SEL_OFST (2)
++#define RG_SSUSB_P_SIGDET_G1_KO_SEL_OFST (0)
++
++//U3D_B2_PHYD_P_SIGDET_CAL1
++#define RG_SSUSB_P_SIGDET_CAL_OFFSET_OFST (24)
++#define RG_SSUSB_P_FORCE_SIGDET_CAL_OFFSET_OFST (16)
++#define RG_SSUSB_P_SIGDET_CAL_EN_OFST (8)
++#define RG_SSUSB_P_FORCE_SIGDET_CAL_EN_OFST (3)
++#define RG_SSUSB_P_SIGDET_FLT_EN_OFST (2)
++#define RG_SSUSB_P_SIGDET_SAMPLE_PRD_OFST (1)
++#define RG_SSUSB_P_SIGDET_REK_OFST (0)
++
++//U3D_B2_PHYD_RXDET1
++#define RG_SSUSB_RXDET_PRB_SEL_OFST (31)
++#define RG_SSUSB_FORCE_CMDET_OFST (30)
++#define RG_SSUSB_RXDET_EN_OFST (29)
++#define RG_SSUSB_FORCE_RXDET_EN_OFST (28)
++#define RG_SSUSB_RXDET_K_TWICE_OFST (27)
++#define RG_SSUSB_RXDET_STB3_SET_OFST (18)
++#define RG_SSUSB_RXDET_STB2_SET_OFST (9)
++#define RG_SSUSB_RXDET_STB1_SET_OFST (0)
++
++//U3D_B2_PHYD_RXDET2
++#define RG_SSUSB_PHYD_TRAINDEC_FORCE_CGEN_OFST (31)
++#define RG_SSUSB_PHYD_BERTLB_FORCE_CGEN_OFST (30)
++#define RG_SSUSB_PHYD_T2RLB_FORCE_CGEN_OFST (29)
++#define RG_SSUSB_PDN_T_SEL_OFST (18)
++#define RG_SSUSB_RXDET_STB3_SET_P3_OFST (9)
++#define RG_SSUSB_RXDET_STB2_SET_P3_OFST (0)
++
++//U3D_B2_PHYD_MISC0
++#define RG_SSUSB_FORCE_PLL_DDS_HF_EN_OFST (22)
++#define RG_SSUSB_PLL_DDS_HF_EN_MAN_OFST (21)
++#define RG_SSUSB_RXLFPS_ENTXDRV_OFST (20)
++#define RG_SSUSB_RX_FL_UNLOCKTH_OFST (16)
++#define RG_SSUSB_LFPS_PSEL_OFST (15)
++#define RG_SSUSB_RX_SIGDET_EN_OFST (14)
++#define RG_SSUSB_RX_SIGDET_EN_SEL_OFST (13)
++#define RG_SSUSB_RX_PI_CAL_EN_OFST (12)
++#define RG_SSUSB_RX_PI_CAL_EN_SEL_OFST (11)
++#define RG_SSUSB_P3_CLS_CK_SEL_OFST (10)
++#define RG_SSUSB_T2RLB_PSEL_OFST (8)
++#define RG_SSUSB_PPCTL_PSEL_OFST (5)
++#define RG_SSUSB_PHYD_TX_DATA_INV_OFST (4)
++#define RG_SSUSB_BERTLB_PSEL_OFST (2)
++#define RG_SSUSB_RETRACK_DIS_OFST (1)
++#define RG_SSUSB_PPERRCNT_CLR_OFST (0)
++
++//U3D_B2_PHYD_MISC2
++#define RG_SSUSB_FRC_PLL_DDS_PREDIV2_OFST (31)
++#define RG_SSUSB_FRC_PLL_DDS_IADJ_OFST (27)
++#define RG_SSUSB_P_SIGDET_125FILTER_OFST (26)
++#define RG_SSUSB_P_SIGDET_RST_FILTER_OFST (25)
++#define RG_SSUSB_P_SIGDET_EID_USE_RAW_OFST (24)
++#define RG_SSUSB_P_SIGDET_LTD_USE_RAW_OFST (23)
++#define RG_SSUSB_EIDLE_BF_RXDET_OFST (22)
++#define RG_SSUSB_EIDLE_LP_STBCYC_OFST (13)
++#define RG_SSUSB_TX_EIDLE_LP_POSTDLY_OFST (7)
++#define RG_SSUSB_TX_EIDLE_LP_PREDLY_OFST (1)
++#define RG_SSUSB_TX_EIDLE_LP_EN_ADV_OFST (0)
++
++//U3D_B2_PHYD_MISC3
++#define RGS_SSUSB_DDS_CALIB_C_STATE_OFST (16)
++#define RGS_SSUSB_PPERRCNT_OFST (0)
++
++//U3D_B2_ROSC_0
++#define RG_SSUSB_RING_OSC_CNTEND_OFST (23)
++#define RG_SSUSB_XTAL_OSC_CNTEND_OFST (16)
++#define RG_SSUSB_RING_OSC_EN_OFST (3)
++#define RG_SSUSB_RING_OSC_FORCE_EN_OFST (2)
++#define RG_SSUSB_FRC_RING_BYPASS_DET_OFST (1)
++#define RG_SSUSB_RING_BYPASS_DET_OFST (0)
++
++//U3D_B2_ROSC_1
++#define RG_SSUSB_RING_OSC_FRC_P3_OFST (20)
++#define RG_SSUSB_RING_OSC_P3_OFST (19)
++#define RG_SSUSB_RING_OSC_FRC_RECAL_OFST (17)
++#define RG_SSUSB_RING_OSC_RECAL_OFST (16)
++#define RG_SSUSB_RING_OSC_SEL_OFST (8)
++#define RG_SSUSB_RING_OSC_FRC_SEL_OFST (0)
++
++//U3D_B2_ROSC_2
++#define RG_SSUSB_RING_DET_STRCYC2_OFST (16)
++#define RG_SSUSB_RING_DET_STRCYC1_OFST (0)
++
++//U3D_B2_ROSC_3
++#define RG_SSUSB_RING_DET_DETWIN1_OFST (16)
++#define RG_SSUSB_RING_DET_STRCYC3_OFST (0)
++
++//U3D_B2_ROSC_4
++#define RG_SSUSB_RING_DET_DETWIN3_OFST (16)
++#define RG_SSUSB_RING_DET_DETWIN2_OFST (0)
++
++//U3D_B2_ROSC_5
++#define RG_SSUSB_RING_DET_LBOND1_OFST (16)
++#define RG_SSUSB_RING_DET_UBOND1_OFST (0)
++
++//U3D_B2_ROSC_6
++#define RG_SSUSB_RING_DET_LBOND2_OFST (16)
++#define RG_SSUSB_RING_DET_UBOND2_OFST (0)
++
++//U3D_B2_ROSC_7
++#define RG_SSUSB_RING_DET_LBOND3_OFST (16)
++#define RG_SSUSB_RING_DET_UBOND3_OFST (0)
++
++//U3D_B2_ROSC_8
++#define RG_SSUSB_RING_RESERVE_OFST (16)
++#define RG_SSUSB_ROSC_PROB_SEL_OFST (2)
++#define RG_SSUSB_RING_FREQMETER_EN_OFST (1)
++#define RG_SSUSB_RING_DET_BPS_UBOND_OFST (0)
++
++//U3D_B2_ROSC_9
++#define RGS_FM_RING_CNT_OFST (16)
++#define RGS_SSUSB_RING_OSC_STATE_OFST (10)
++#define RGS_SSUSB_RING_OSC_STABLE_OFST (9)
++#define RGS_SSUSB_RING_OSC_CAL_FAIL_OFST (8)
++#define RGS_SSUSB_RING_OSC_CAL_OFST (0)
++
++//U3D_B2_ROSC_A
++#define RGS_SSUSB_ROSC_PROB_OUT_OFST (0)
++
++//U3D_PHYD_VERSION
++#define RGS_SSUSB_PHYD_VERSION_OFST (0)
++
++//U3D_PHYD_MODEL
++#define RGS_SSUSB_PHYD_MODEL_OFST (0)
++
++
++///////////////////////////////////////////////////////////////////////////////
++
++struct sifslv_chip_reg {
++ PHY_LE32 xtalbias;
++ PHY_LE32 syspll1;
++ PHY_LE32 gpio_ctla;
++ PHY_LE32 gpio_ctlb;
++ PHY_LE32 gpio_ctlc;
++};
++
++//U3D_GPIO_CTLA
++#define RG_C60802_GPIO_CTLA (0xffffffff<<0) //31:0
++
++//U3D_GPIO_CTLB
++#define RG_C60802_GPIO_CTLB (0xffffffff<<0) //31:0
++
++//U3D_GPIO_CTLC
++#define RG_C60802_GPIO_CTLC (0xffffffff<<0) //31:0
++
++/* OFFSET */
++
++//U3D_GPIO_CTLA
++#define RG_C60802_GPIO_CTLA_OFST (0)
++
++//U3D_GPIO_CTLB
++#define RG_C60802_GPIO_CTLB_OFST (0)
++
++//U3D_GPIO_CTLC
++#define RG_C60802_GPIO_CTLC_OFST (0)
++
++///////////////////////////////////////////////////////////////////////////////
++
++struct sifslv_fm_feg {
++ //0x0
++ PHY_LE32 fmcr0;
++ PHY_LE32 fmcr1;
++ PHY_LE32 fmcr2;
++ PHY_LE32 fmmonr0;
++ //0x10
++ PHY_LE32 fmmonr1;
++};
++
++//U3D_FMCR0
++#define RG_LOCKTH (0xf<<28) //31:28
++#define RG_MONCLK_SEL (0x3<<26) //27:26
++#define RG_FM_MODE (0x1<<25) //25:25
++#define RG_FREQDET_EN (0x1<<24) //24:24
++#define RG_CYCLECNT (0xffffff<<0) //23:0
++
++//U3D_FMCR1
++#define RG_TARGET (0xffffffff<<0) //31:0
++
++//U3D_FMCR2
++#define RG_OFFSET (0xffffffff<<0) //31:0
++
++//U3D_FMMONR0
++#define USB_FM_OUT (0xffffffff<<0) //31:0
++
++//U3D_FMMONR1
++#define RG_MONCLK_SEL_3 (0x1<<9) //9:9
++#define RG_FRCK_EN (0x1<<8) //8:8
++#define USBPLL_LOCK (0x1<<1) //1:1
++#define USB_FM_VLD (0x1<<0) //0:0
++
++
++/* OFFSET */
++
++//U3D_FMCR0
++#define RG_LOCKTH_OFST (28)
++#define RG_MONCLK_SEL_OFST (26)
++#define RG_FM_MODE_OFST (25)
++#define RG_FREQDET_EN_OFST (24)
++#define RG_CYCLECNT_OFST (0)
++
++//U3D_FMCR1
++#define RG_TARGET_OFST (0)
++
++//U3D_FMCR2
++#define RG_OFFSET_OFST (0)
++
++//U3D_FMMONR0
++#define USB_FM_OUT_OFST (0)
++
++//U3D_FMMONR1
++#define RG_MONCLK_SEL_3_OFST (9)
++#define RG_FRCK_EN_OFST (8)
++#define USBPLL_LOCK_OFST (1)
++#define USB_FM_VLD_OFST (0)
++
++
++///////////////////////////////////////////////////////////////////////////////
++
++PHY_INT32 phy_init(struct u3phy_info *info);
++PHY_INT32 phy_change_pipe_phase(struct u3phy_info *info, PHY_INT32 phy_drv, PHY_INT32 pipe_phase);
++PHY_INT32 eyescan_init(struct u3phy_info *info);
++PHY_INT32 phy_eyescan(struct u3phy_info *info, PHY_INT32 x_t1, PHY_INT32 y_t1, PHY_INT32 x_br, PHY_INT32 y_br, PHY_INT32 delta_x, PHY_INT32 delta_y
++ , PHY_INT32 eye_cnt, PHY_INT32 num_cnt, PHY_INT32 PI_cal_en, PHY_INT32 num_ignore_cnt);
++PHY_INT32 u2_save_cur_en(struct u3phy_info *info);
++PHY_INT32 u2_save_cur_re(struct u3phy_info *info);
++PHY_INT32 u2_slew_rate_calibration(struct u3phy_info *info);
++
++#endif
++#endif
+diff --git a/drivers/usb/host/mtk-phy-ahb.c b/drivers/usb/host/mtk-phy-ahb.c
+new file mode 100644
+index 0000000..ebaf7c8
+--- /dev/null
++++ b/drivers/usb/host/mtk-phy-ahb.c
+@@ -0,0 +1,58 @@
++#include "mtk-phy.h"
++#ifdef CONFIG_U3D_HAL_SUPPORT
++#include "mu3d_hal_osal.h"
++#endif
++
++#ifdef CONFIG_U3_PHY_AHB_SUPPORT
++#include <linux/gfp.h>
++#include <linux/kernel.h>
++#include <linux/slab.h>
++
++#ifndef CONFIG_U3D_HAL_SUPPORT
++#define os_writel(addr,data) {\
++ (*((volatile PHY_UINT32*)(addr)) = data);\
++ }
++#define os_readl(addr) *((volatile PHY_UINT32*)(addr))
++#define os_writelmsk(addr, data, msk) \
++ { os_writel(addr, ((os_readl(addr) & ~(msk)) | ((data) & (msk)))); \
++ }
++#define os_setmsk(addr, msk) \
++ { os_writel(addr, os_readl(addr) | msk); \
++ }
++#define os_clrmsk(addr, msk) \
++ { os_writel(addr, os_readl(addr) &~ msk); \
++ }
++/*msk the data first, then umsk with the umsk.*/
++#define os_writelmskumsk(addr, data, msk, umsk) \
++{\
++ os_writel(addr, ((os_readl(addr) & ~(msk)) | ((data) & (msk))) & (umsk));\
++}
++
++#endif
++
++PHY_INT32 U3PhyWriteReg32(PHY_UINT32 addr, PHY_UINT32 data)
++{
++ os_writel(addr, data);
++
++ return 0;
++}
++
++PHY_INT32 U3PhyReadReg32(PHY_UINT32 addr)
++{
++ return os_readl(addr);
++}
++
++PHY_INT32 U3PhyWriteReg8(PHY_UINT32 addr, PHY_UINT8 data)
++{
++ os_writelmsk(addr&0xfffffffc, data<<((addr%4)*8), 0xff<<((addr%4)*8));
++
++ return 0;
++}
++
++PHY_INT8 U3PhyReadReg8(PHY_UINT32 addr)
++{
++ return ((os_readl(addr)>>((addr%4)*8))&0xff);
++}
++
++#endif
++
+diff --git a/drivers/usb/host/mtk-phy.c b/drivers/usb/host/mtk-phy.c
+new file mode 100644
+index 0000000..7ed8f01
+--- /dev/null
++++ b/drivers/usb/host/mtk-phy.c
+@@ -0,0 +1,102 @@
++#include <linux/gfp.h>
++#include <linux/kernel.h>
++#include <linux/slab.h>
++#define U3_PHY_LIB
++#include "mtk-phy.h"
++#ifdef CONFIG_PROJECT_7621
++#include "mtk-phy-7621.h"
++#endif
++#ifdef CONFIG_PROJECT_PHY
++static struct u3phy_operator project_operators = {
++ .init = phy_init,
++ .change_pipe_phase = phy_change_pipe_phase,
++ .eyescan_init = eyescan_init,
++ .eyescan = phy_eyescan,
++ .u2_slew_rate_calibration = u2_slew_rate_calibration,
++};
++#endif
++
++
++PHY_INT32 u3phy_init(){
++#ifndef CONFIG_PROJECT_PHY
++ PHY_INT32 u3phy_version;
++#endif
++
++ if(u3phy != NULL){
++ return PHY_TRUE;
++ }
++
++ u3phy = kmalloc(sizeof(struct u3phy_info), GFP_NOIO);
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ u3phy_p1 = kmalloc(sizeof(struct u3phy_info), GFP_NOIO);
++#endif
++#ifdef CONFIG_U3_PHY_GPIO_SUPPORT
++ u3phy->phyd_version_addr = 0x2000e4;
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ u3phy_p1->phyd_version_addr = 0x2000e4;
++#endif
++#else
++ u3phy->phyd_version_addr = U3_PHYD_B2_BASE + 0xe4;
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ u3phy_p1->phyd_version_addr = U3_PHYD_B2_BASE_P1 + 0xe4;
++#endif
++#endif
++
++#ifdef CONFIG_PROJECT_PHY
++
++ u3phy->u2phy_regs = (struct u2phy_reg *)U2_PHY_BASE;
++ u3phy->u3phyd_regs = (struct u3phyd_reg *)U3_PHYD_BASE;
++ u3phy->u3phyd_bank2_regs = (struct u3phyd_bank2_reg *)U3_PHYD_B2_BASE;
++ u3phy->u3phya_regs = (struct u3phya_reg *)U3_PHYA_BASE;
++ u3phy->u3phya_da_regs = (struct u3phya_da_reg *)U3_PHYA_DA_BASE;
++ u3phy->sifslv_chip_regs = (struct sifslv_chip_reg *)SIFSLV_CHIP_BASE;
++ u3phy->sifslv_fm_regs = (struct sifslv_fm_feg *)SIFSLV_FM_FEG_BASE;
++ u3phy_ops = &project_operators;
++
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ u3phy_p1->u2phy_regs = (struct u2phy_reg *)U2_PHY_BASE_P1;
++ u3phy_p1->u3phyd_regs = (struct u3phyd_reg *)U3_PHYD_BASE_P1;
++ u3phy_p1->u3phyd_bank2_regs = (struct u3phyd_bank2_reg *)U3_PHYD_B2_BASE_P1;
++ u3phy_p1->u3phya_regs = (struct u3phya_reg *)U3_PHYA_BASE_P1;
++ u3phy_p1->u3phya_da_regs = (struct u3phya_da_reg *)U3_PHYA_DA_BASE_P1;
++ u3phy_p1->sifslv_chip_regs = (struct sifslv_chip_reg *)SIFSLV_CHIP_BASE;
++ u3phy_p1->sifslv_fm_regs = (struct sifslv_fm_feg *)SIFSLV_FM_FEG_BASE;
++#endif
++#endif
++
++ return PHY_TRUE;
++}
++
++PHY_INT32 U3PhyWriteField8(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value){
++ PHY_INT8 cur_value;
++ PHY_INT8 new_value;
++
++ cur_value = U3PhyReadReg8(addr);
++ new_value = (cur_value & (~mask)) | (value << offset);
++ //udelay(i2cdelayus);
++ U3PhyWriteReg8(addr, new_value);
++ return PHY_TRUE;
++}
++
++PHY_INT32 U3PhyWriteField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value){
++ PHY_INT32 cur_value;
++ PHY_INT32 new_value;
++
++ cur_value = U3PhyReadReg32(addr);
++ new_value = (cur_value & (~mask)) | ((value << offset) & mask);
++ U3PhyWriteReg32(addr, new_value);
++ //DRV_MDELAY(100);
++
++ return PHY_TRUE;
++}
++
++PHY_INT32 U3PhyReadField8(PHY_INT32 addr,PHY_INT32 offset,PHY_INT32 mask){
++
++ return ((U3PhyReadReg8(addr) & mask) >> offset);
++}
++
++PHY_INT32 U3PhyReadField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask){
++
++ return ((U3PhyReadReg32(addr) & mask) >> offset);
++}
++
+diff --git a/drivers/usb/host/mtk-phy.h b/drivers/usb/host/mtk-phy.h
+new file mode 100644
+index 0000000..07ed410
+--- /dev/null
++++ b/drivers/usb/host/mtk-phy.h
+@@ -0,0 +1,179 @@
++#ifndef __MTK_PHY_NEW_H
++#define __MTK_PHY_NEW_H
++
++//#define CONFIG_U3D_HAL_SUPPORT
++
++/* include system library */
++#include <linux/gfp.h>
++#include <linux/kernel.h>
++#include <linux/slab.h>
++#include <linux/delay.h>
++
++/* Choose PHY R/W implementation */
++//#define CONFIG_U3_PHY_GPIO_SUPPORT //SW I2C implemented by GPIO
++#define CONFIG_U3_PHY_AHB_SUPPORT //AHB, only on SoC
++
++/* Choose PHY version */
++//Select your project by defining one of the followings
++#define CONFIG_PROJECT_7621 //7621
++#define CONFIG_PROJECT_PHY
++
++/* BASE ADDRESS DEFINE, should define this on ASIC */
++#define PHY_BASE 0xBE1D0000
++#define SIFSLV_FM_FEG_BASE (PHY_BASE+0x100)
++#define SIFSLV_CHIP_BASE (PHY_BASE+0x700)
++#define U2_PHY_BASE (PHY_BASE+0x800)
++#define U3_PHYD_BASE (PHY_BASE+0x900)
++#define U3_PHYD_B2_BASE (PHY_BASE+0xa00)
++#define U3_PHYA_BASE (PHY_BASE+0xb00)
++#define U3_PHYA_DA_BASE (PHY_BASE+0xc00)
++
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++#define SIFSLV_FM_FEG_BASE_P1 (PHY_BASE+0x100)
++#define SIFSLV_CHIP_BASE_P1 (PHY_BASE+0x700)
++#define U2_PHY_BASE_P1 (PHY_BASE+0x1000)
++#define U3_PHYD_BASE_P1 (PHY_BASE+0x1100)
++#define U3_PHYD_B2_BASE_P1 (PHY_BASE+0x1200)
++#define U3_PHYA_BASE_P1 (PHY_BASE+0x1300)
++#define U3_PHYA_DA_BASE_P1 (PHY_BASE+0x1400)
++#endif
++
++/*
++
++0x00000100 MODULE ssusb_sifslv_fmreg ssusb_sifslv_fmreg
++0x00000700 MODULE ssusb_sifslv_ippc ssusb_sifslv_ippc
++0x00000800 MODULE ssusb_sifslv_u2phy_com ssusb_sifslv_u2_phy_com_T28
++0x00000900 MODULE ssusb_sifslv_u3phyd ssusb_sifslv_u3phyd_T28
++0x00000a00 MODULE ssusb_sifslv_u3phyd_bank2 ssusb_sifslv_u3phyd_bank2_T28
++0x00000b00 MODULE ssusb_sifslv_u3phya ssusb_sifslv_u3phya_T28
++0x00000c00 MODULE ssusb_sifslv_u3phya_da ssusb_sifslv_u3phya_da_T28
++*/
++
++
++/* TYPE DEFINE */
++typedef unsigned int PHY_UINT32;
++typedef int PHY_INT32;
++typedef unsigned short PHY_UINT16;
++typedef short PHY_INT16;
++typedef unsigned char PHY_UINT8;
++typedef char PHY_INT8;
++
++typedef PHY_UINT32 __bitwise PHY_LE32;
++
++/* CONSTANT DEFINE */
++#define PHY_FALSE 0
++#define PHY_TRUE 1
++
++/* MACRO DEFINE */
++#define DRV_WriteReg32(addr,data) ((*(volatile PHY_UINT32 *)(addr)) = (unsigned long)(data))
++#define DRV_Reg32(addr) (*(volatile PHY_UINT32 *)(addr))
++
++#define DRV_MDELAY mdelay
++#define DRV_MSLEEP msleep
++#define DRV_UDELAY udelay
++#define DRV_USLEEP usleep
++
++/* PHY FUNCTION DEFINE, implemented in platform files, ex. ahb, gpio */
++PHY_INT32 U3PhyWriteReg32(PHY_UINT32 addr, PHY_UINT32 data);
++PHY_INT32 U3PhyReadReg32(PHY_UINT32 addr);
++PHY_INT32 U3PhyWriteReg8(PHY_UINT32 addr, PHY_UINT8 data);
++PHY_INT8 U3PhyReadReg8(PHY_UINT32 addr);
++
++/* PHY GENERAL USAGE FUNC, implemented in mtk-phy.c */
++PHY_INT32 U3PhyWriteField8(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value);
++PHY_INT32 U3PhyWriteField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value);
++PHY_INT32 U3PhyReadField8(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask);
++PHY_INT32 U3PhyReadField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask);
++
++struct u3phy_info {
++ PHY_INT32 phy_version;
++ PHY_INT32 phyd_version_addr;
++
++#ifdef CONFIG_PROJECT_PHY
++ struct u2phy_reg *u2phy_regs;
++ struct u3phya_reg *u3phya_regs;
++ struct u3phya_da_reg *u3phya_da_regs;
++ struct u3phyd_reg *u3phyd_regs;
++ struct u3phyd_bank2_reg *u3phyd_bank2_regs;
++ struct sifslv_chip_reg *sifslv_chip_regs;
++ struct sifslv_fm_feg *sifslv_fm_regs;
++#endif
++};
++
++struct u3phy_operator {
++ PHY_INT32 (*init) (struct u3phy_info *info);
++ PHY_INT32 (*change_pipe_phase) (struct u3phy_info *info, PHY_INT32 phy_drv, PHY_INT32 pipe_phase);
++ PHY_INT32 (*eyescan_init) (struct u3phy_info *info);
++ PHY_INT32 (*eyescan) (struct u3phy_info *info, PHY_INT32 x_t1, PHY_INT32 y_t1, PHY_INT32 x_br, PHY_INT32 y_br, PHY_INT32 delta_x, PHY_INT32 delta_y, PHY_INT32 eye_cnt, PHY_INT32 num_cnt, PHY_INT32 PI_cal_en, PHY_INT32 num_ignore_cnt);
++ PHY_INT32 (*u2_save_current_entry) (struct u3phy_info *info);
++ PHY_INT32 (*u2_save_current_recovery) (struct u3phy_info *info);
++ PHY_INT32 (*u2_slew_rate_calibration) (struct u3phy_info *info);
++};
++
++#ifdef U3_PHY_LIB
++#define AUTOEXT
++#else
++#define AUTOEXT extern
++#endif
++
++AUTOEXT struct u3phy_info *u3phy;
++AUTOEXT struct u3phy_info *u3phy_p1;
++AUTOEXT struct u3phy_operator *u3phy_ops;
++
++/*********eye scan required*********/
++
++#define LO_BYTE(x) ((PHY_UINT8)((x) & 0xFF))
++#define HI_BYTE(x) ((PHY_UINT8)(((x) & 0xFF00) >> 8))
++
++typedef enum
++{
++ SCAN_UP,
++ SCAN_DN
++} enumScanDir;
++
++struct strucScanRegion
++{
++ PHY_INT8 bX_tl;
++ PHY_INT8 bY_tl;
++ PHY_INT8 bX_br;
++ PHY_INT8 bY_br;
++ PHY_INT8 bDeltaX;
++ PHY_INT8 bDeltaY;
++};
++
++struct strucTestCycle
++{
++ PHY_UINT16 wEyeCnt;
++ PHY_INT8 bNumOfEyeCnt;
++ PHY_INT8 bPICalEn;
++ PHY_INT8 bNumOfIgnoreCnt;
++};
++
++#define ERRCNT_MAX 128
++#define CYCLE_COUNT_MAX 15
++
++/// the map resolution is 128 x 128 pts
++#define MAX_X 127
++#define MAX_Y 127
++#define MIN_X 0
++#define MIN_Y 0
++
++PHY_INT32 u3phy_init(void);
++
++AUTOEXT struct strucScanRegion _rEye1;
++AUTOEXT struct strucScanRegion _rEye2;
++AUTOEXT struct strucTestCycle _rTestCycle;
++AUTOEXT PHY_UINT8 _bXcurr;
++AUTOEXT PHY_UINT8 _bYcurr;
++AUTOEXT enumScanDir _eScanDir;
++AUTOEXT PHY_INT8 _fgXChged;
++AUTOEXT PHY_INT8 _bPIResult;
++/* use local variable instead to save memory use */
++#if 0
++AUTOEXT PHY_UINT32 pwErrCnt0[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX];
++AUTOEXT PHY_UINT32 pwErrCnt1[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX];
++#endif
++
++/***********************************/
++#endif
++
+diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h
+index 638e88f..b945c3e 100644
+--- a/drivers/usb/host/pci-quirks.h
++++ b/drivers/usb/host/pci-quirks.h
+@@ -1,7 +1,7 @@
+ #ifndef __LINUX_USB_PCI_QUIRKS_H
+ #define __LINUX_USB_PCI_QUIRKS_H
+
+-#ifdef CONFIG_PCI
++#if defined (CONFIG_PCI) && !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
+ int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
+ int usb_amd_find_chipset_info(void);
+diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c
+index eb009a4..b491120 100644
+--- a/drivers/usb/host/xhci-dbg.c
++++ b/drivers/usb/host/xhci-dbg.c
+@@ -21,6 +21,9 @@
+ */
+
+ #include "xhci.h"
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++#include "xhci-mtk.h"
++#endif
+
+ #define XHCI_INIT_VALUE 0x0
+
+diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
+index bce4391..e156473 100644
+--- a/drivers/usb/host/xhci-mem.c
++++ b/drivers/usb/host/xhci-mem.c
+@@ -67,6 +67,9 @@ static struct xhci_segment *xhci_segment_alloc(struct xhci_hcd *xhci,
+
+ static void xhci_segment_free(struct xhci_hcd *xhci, struct xhci_segment *seg)
+ {
++ if (!seg)
++ return;
++
+ if (seg->trbs) {
+ dma_pool_free(xhci->segment_pool, seg->trbs, seg->dma);
+ seg->trbs = NULL;
+@@ -1375,9 +1378,17 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
+ max_burst = (usb_endpoint_maxp(&ep->desc)
+ & 0x1800) >> 11;
+ }
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ if ((max_packet % 4 == 2) && (max_packet % 16 != 14) && (max_burst == 0) && usb_endpoint_dir_in(&ep->desc))
++ max_packet += 2;
++#endif
+ break;
+ case USB_SPEED_FULL:
+ case USB_SPEED_LOW:
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ if ((max_packet % 4 == 2) && (max_packet % 16 != 14) && (max_burst == 0) && usb_endpoint_dir_in(&ep->desc))
++ max_packet += 2;
++#endif
+ break;
+ default:
+ BUG();
+diff --git a/drivers/usb/host/xhci-mtk-power.c b/drivers/usb/host/xhci-mtk-power.c
+new file mode 100644
+index 0000000..09870fa
+--- /dev/null
++++ b/drivers/usb/host/xhci-mtk-power.c
+@@ -0,0 +1,115 @@
++#include "xhci-mtk.h"
++#include "xhci-mtk-power.h"
++#include "xhci.h"
++#include <linux/kernel.h> /* printk() */
++#include <linux/slab.h>
++#include <linux/delay.h>
++
++static int g_num_u3_port;
++static int g_num_u2_port;
++
++
++void enableXhciAllPortPower(struct xhci_hcd *xhci){
++ int i;
++ u32 port_id, temp;
++ u32 __iomem *addr;
++
++ g_num_u3_port = SSUSB_U3_PORT_NUM(readl(SSUSB_IP_CAP));
++ g_num_u2_port = SSUSB_U2_PORT_NUM(readl(SSUSB_IP_CAP));
++
++ for(i=1; i<=g_num_u3_port; i++){
++ port_id=i;
++ addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(port_id-1 & 0xff);
++ temp = readl(addr);
++ temp = xhci_port_state_to_neutral(temp);
++ temp |= PORT_POWER;
++ writel(temp, addr);
++ }
++ for(i=1; i<=g_num_u2_port; i++){
++ port_id=i+g_num_u3_port;
++ addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(port_id-1 & 0xff);
++ temp = readl(addr);
++ temp = xhci_port_state_to_neutral(temp);
++ temp |= PORT_POWER;
++ writel(temp, addr);
++ }
++}
++
++void enableAllClockPower(){
++
++ int i;
++ u32 temp;
++
++ g_num_u3_port = SSUSB_U3_PORT_NUM(readl(SSUSB_IP_CAP));
++ g_num_u2_port = SSUSB_U2_PORT_NUM(readl(SSUSB_IP_CAP));
++
++ //2. Enable xHC
++ writel(readl(SSUSB_IP_PW_CTRL) | (SSUSB_IP_SW_RST), SSUSB_IP_PW_CTRL);
++ writel(readl(SSUSB_IP_PW_CTRL) & (~SSUSB_IP_SW_RST), SSUSB_IP_PW_CTRL);
++ writel(readl(SSUSB_IP_PW_CTRL_1) & (~SSUSB_IP_PDN), SSUSB_IP_PW_CTRL_1);
++
++ //1. Enable target ports
++ for(i=0; i<g_num_u3_port; i++){
++ temp = readl(SSUSB_U3_CTRL(i));
++ temp = temp & (~SSUSB_U3_PORT_PDN) & (~SSUSB_U3_PORT_DIS);
++ writel(temp, SSUSB_U3_CTRL(i));
++ }
++ for(i=0; i<g_num_u2_port; i++){
++ temp = readl(SSUSB_U2_CTRL(i));
++ temp = temp & (~SSUSB_U2_PORT_PDN) & (~SSUSB_U2_PORT_DIS);
++ writel(temp, SSUSB_U2_CTRL(i));
++ }
++ msleep(100);
++}
++
++
++//(X)disable clock/power of a port
++//(X)if all ports are disabled, disable IP ctrl power
++//disable all ports and IP clock/power, this is just mention HW that the power/clock of port
++//and IP could be disable if suspended.
++//If doesn't not disable all ports at first, the IP clock/power will never be disabled
++//(some U2 and U3 ports are binded to the same connection, that is, they will never enter suspend at the same time
++//port_index: port number
++//port_rev: 0x2 - USB2.0, 0x3 - USB3.0 (SuperSpeed)
++void disablePortClockPower(void){
++ int i;
++ u32 temp;
++
++ g_num_u3_port = SSUSB_U3_PORT_NUM(readl(SSUSB_IP_CAP));
++ g_num_u2_port = SSUSB_U2_PORT_NUM(readl(SSUSB_IP_CAP));
++
++ for(i=0; i<g_num_u3_port; i++){
++ temp = readl(SSUSB_U3_CTRL(i));
++ temp = temp | (SSUSB_U3_PORT_PDN);
++ writel(temp, SSUSB_U3_CTRL(i));
++ }
++ for(i=0; i<g_num_u2_port; i++){
++ temp = readl(SSUSB_U2_CTRL(i));
++ temp = temp | (SSUSB_U2_PORT_PDN);
++ writel(temp, SSUSB_U2_CTRL(i));
++ }
++ writel(readl(SSUSB_IP_PW_CTRL_1) | (SSUSB_IP_PDN), SSUSB_IP_PW_CTRL_1);
++}
++
++//if IP ctrl power is disabled, enable it
++//enable clock/power of a port
++//port_index: port number
++//port_rev: 0x2 - USB2.0, 0x3 - USB3.0 (SuperSpeed)
++void enablePortClockPower(int port_index, int port_rev){
++ int i;
++ u32 temp;
++
++ writel(readl(SSUSB_IP_PW_CTRL_1) & (~SSUSB_IP_PDN), SSUSB_IP_PW_CTRL_1);
++
++ if(port_rev == 0x3){
++ temp = readl(SSUSB_U3_CTRL(port_index));
++ temp = temp & (~SSUSB_U3_PORT_PDN);
++ writel(temp, SSUSB_U3_CTRL(port_index));
++ }
++ else if(port_rev == 0x2){
++ temp = readl(SSUSB_U2_CTRL(port_index));
++ temp = temp & (~SSUSB_U2_PORT_PDN);
++ writel(temp, SSUSB_U2_CTRL(port_index));
++ }
++}
++
+diff --git a/drivers/usb/host/xhci-mtk-power.h b/drivers/usb/host/xhci-mtk-power.h
+new file mode 100644
+index 0000000..e57c243
+--- /dev/null
++++ b/drivers/usb/host/xhci-mtk-power.h
+@@ -0,0 +1,13 @@
++#ifndef _XHCI_MTK_POWER_H
++#define _XHCI_MTK_POWER_H
++
++#include <linux/usb.h>
++#include "xhci.h"
++#include "xhci-mtk.h"
++
++void enableXhciAllPortPower(struct xhci_hcd *xhci);
++void enableAllClockPower(void);
++void disablePortClockPower(void);
++void enablePortClockPower(int port_index, int port_rev);
++
++#endif
+diff --git a/drivers/usb/host/xhci-mtk-scheduler.c b/drivers/usb/host/xhci-mtk-scheduler.c
+new file mode 100644
+index 0000000..bf6a8bd
+--- /dev/null
++++ b/drivers/usb/host/xhci-mtk-scheduler.c
+@@ -0,0 +1,608 @@
++#include "xhci-mtk-scheduler.h"
++#include <linux/kernel.h> /* printk() */
++
++static struct sch_ep **ss_out_eps[MAX_EP_NUM];
++static struct sch_ep **ss_in_eps[MAX_EP_NUM];
++static struct sch_ep **hs_eps[MAX_EP_NUM]; //including tt isoc
++static struct sch_ep **tt_intr_eps[MAX_EP_NUM];
++
++
++int mtk_xhci_scheduler_init(void){
++ int i;
++
++ for(i=0; i<MAX_EP_NUM; i++){
++ ss_out_eps[i] = NULL;
++ }
++ for(i=0; i<MAX_EP_NUM; i++){
++ ss_in_eps[i] = NULL;
++ }
++ for(i=0; i<MAX_EP_NUM; i++){
++ hs_eps[i] = NULL;
++ }
++ for(i=0; i<MAX_EP_NUM; i++){
++ tt_intr_eps[i] = NULL;
++ }
++ return 0;
++}
++
++int add_sch_ep(int dev_speed, int is_in, int isTT, int ep_type, int maxp, int interval, int burst
++ , int mult, int offset, int repeat, int pkts, int cs_count, int burst_mode
++ , int bw_cost, mtk_u32 *ep, struct sch_ep *tmp_ep){
++
++ struct sch_ep **ep_array;
++ int i;
++
++ if(is_in && dev_speed == USB_SPEED_SUPER ){
++ ep_array = (struct sch_ep **)ss_in_eps;
++ }
++ else if(dev_speed == USB_SPEED_SUPER){
++ ep_array = (struct sch_ep **)ss_out_eps;
++ }
++ else if(dev_speed == USB_SPEED_HIGH || (isTT && ep_type == USB_EP_ISOC)){
++ ep_array = (struct sch_ep **)hs_eps;
++ }
++ else{
++ ep_array = (struct sch_ep **)tt_intr_eps;
++ }
++ for(i=0; i<MAX_EP_NUM; i++){
++ if(ep_array[i] == NULL){
++ tmp_ep->dev_speed = dev_speed;
++ tmp_ep->isTT = isTT;
++ tmp_ep->is_in = is_in;
++ tmp_ep->ep_type = ep_type;
++ tmp_ep->maxp = maxp;
++ tmp_ep->interval = interval;
++ tmp_ep->burst = burst;
++ tmp_ep->mult = mult;
++ tmp_ep->offset = offset;
++ tmp_ep->repeat = repeat;
++ tmp_ep->pkts = pkts;
++ tmp_ep->cs_count = cs_count;
++ tmp_ep->burst_mode = burst_mode;
++ tmp_ep->bw_cost = bw_cost;
++ tmp_ep->ep = ep;
++ ep_array[i] = tmp_ep;
++ return SCH_SUCCESS;
++ }
++ }
++ return SCH_FAIL;
++}
++
++int count_ss_bw(int is_in, int ep_type, int maxp, int interval, int burst, int mult, int offset, int repeat
++ , int td_size){
++ int i, j, k;
++ int bw_required[3];
++ int final_bw_required;
++ int bw_required_per_repeat;
++ int tmp_bw_required;
++ struct sch_ep *cur_sch_ep;
++ struct sch_ep **ep_array;
++ int cur_offset;
++ int cur_ep_offset;
++ int tmp_offset;
++ int tmp_interval;
++ int ep_offset;
++ int ep_interval;
++ int ep_repeat;
++ int ep_mult;
++
++ if(is_in){
++ ep_array = (struct sch_ep **)ss_in_eps;
++ }
++ else{
++ ep_array = (struct sch_ep **)ss_out_eps;
++ }
++
++ bw_required[0] = 0;
++ bw_required[1] = 0;
++ bw_required[2] = 0;
++
++ if(repeat == 0){
++ final_bw_required = 0;
++ for(i=0; i<MAX_EP_NUM; i++){
++ cur_sch_ep = ep_array[i];
++ if(cur_sch_ep == NULL){
++ continue;
++ }
++ ep_interval = cur_sch_ep->interval;
++ ep_offset = cur_sch_ep->offset;
++ if(cur_sch_ep->repeat == 0){
++ if(ep_interval >= interval){
++ tmp_offset = ep_offset + ep_interval - offset;
++ tmp_interval = interval;
++ }
++ else{
++ tmp_offset = offset + interval - ep_offset;
++ tmp_interval = ep_interval;
++ }
++ if(tmp_offset % tmp_interval == 0){
++ final_bw_required += cur_sch_ep->bw_cost;
++ }
++ }
++ else{
++ ep_repeat = cur_sch_ep->repeat;
++ ep_mult = cur_sch_ep->mult;
++ for(k=0; k<=ep_mult; k++){
++ cur_ep_offset = ep_offset+(k*ep_mult);
++ if(ep_interval >= interval){
++ tmp_offset = cur_ep_offset + ep_interval - offset;
++ tmp_interval = interval;
++ }
++ else{
++ tmp_offset = offset + interval - cur_ep_offset;
++ tmp_interval = ep_interval;
++ }
++ if(tmp_offset % tmp_interval == 0){
++ final_bw_required += cur_sch_ep->bw_cost;
++ break;
++ }
++ }
++ }
++ }
++ final_bw_required += td_size;
++ }
++ else{
++ bw_required_per_repeat = maxp * (burst+1);
++ for(j=0; j<=mult; j++){
++ tmp_bw_required = 0;
++ cur_offset = offset+(j*repeat);
++ for(i=0; i<MAX_EP_NUM; i++){
++ cur_sch_ep = ep_array[i];
++ if(cur_sch_ep == NULL){
++ continue;
++ }
++ ep_interval = cur_sch_ep->interval;
++ ep_offset = cur_sch_ep->offset;
++ if(cur_sch_ep->repeat == 0){
++ if(ep_interval >= interval){
++ tmp_offset = ep_offset + ep_interval - cur_offset;
++ tmp_interval = interval;
++ }
++ else{
++ tmp_offset = cur_offset + interval - ep_offset;
++ tmp_interval = ep_interval;
++ }
++ if(tmp_offset % tmp_interval == 0){
++ tmp_bw_required += cur_sch_ep->bw_cost;
++ }
++ }
++ else{
++ ep_repeat = cur_sch_ep->repeat;
++ ep_mult = cur_sch_ep->mult;
++ for(k=0; k<=ep_mult; k++){
++ cur_ep_offset = ep_offset+(k*ep_repeat);
++ if(ep_interval >= interval){
++ tmp_offset = cur_ep_offset + ep_interval - cur_offset;
++ tmp_interval = interval;
++ }
++ else{
++ tmp_offset = cur_offset + interval - cur_ep_offset;
++ tmp_interval = ep_interval;
++ }
++ if(tmp_offset % tmp_interval == 0){
++ tmp_bw_required += cur_sch_ep->bw_cost;
++ break;
++ }
++ }
++ }
++ }
++ bw_required[j] = tmp_bw_required;
++ }
++ final_bw_required = SS_BW_BOUND;
++ for(j=0; j<=mult; j++){
++ if(bw_required[j] < final_bw_required){
++ final_bw_required = bw_required[j];
++ }
++ }
++ final_bw_required += bw_required_per_repeat;
++ }
++ return final_bw_required;
++}
++
++int count_hs_bw(int ep_type, int maxp, int interval, int offset, int td_size){
++ int i;
++ int bw_required;
++ struct sch_ep *cur_sch_ep;
++ int tmp_offset;
++ int tmp_interval;
++ int ep_offset;
++ int ep_interval;
++ int cur_tt_isoc_interval; //for isoc tt check
++
++ bw_required = 0;
++ for(i=0; i<MAX_EP_NUM; i++){
++
++ cur_sch_ep = (struct sch_ep *)hs_eps[i];
++ if(cur_sch_ep == NULL){
++ continue;
++ }
++ ep_offset = cur_sch_ep->offset;
++ ep_interval = cur_sch_ep->interval;
++
++ if(cur_sch_ep->isTT && cur_sch_ep->ep_type == USB_EP_ISOC){
++ cur_tt_isoc_interval = ep_interval<<3;
++ if(ep_interval >= interval){
++ tmp_offset = ep_offset + cur_tt_isoc_interval - offset;
++ tmp_interval = interval;
++ }
++ else{
++ tmp_offset = offset + interval - ep_offset;
++ tmp_interval = cur_tt_isoc_interval;
++ }
++ if(cur_sch_ep->is_in){
++ if((tmp_offset%tmp_interval >=2) && (tmp_offset%tmp_interval <= cur_sch_ep->cs_count)){
++ bw_required += 188;
++ }
++ }
++ else{
++ if(tmp_offset%tmp_interval <= cur_sch_ep->cs_count){
++ bw_required += 188;
++ }
++ }
++ }
++ else{
++ if(ep_interval >= interval){
++ tmp_offset = ep_offset + ep_interval - offset;
++ tmp_interval = interval;
++ }
++ else{
++ tmp_offset = offset + interval - ep_offset;
++ tmp_interval = ep_interval;
++ }
++ if(tmp_offset%tmp_interval == 0){
++ bw_required += cur_sch_ep->bw_cost;
++ }
++ }
++ }
++ bw_required += td_size;
++ return bw_required;
++}
++
++int count_tt_isoc_bw(int is_in, int maxp, int interval, int offset, int td_size){
++ char is_cs;
++ int mframe_idx, frame_idx, s_frame, s_mframe, cur_mframe;
++ int bw_required, max_bw;
++ int ss_cs_count;
++ int cs_mframe;
++ int max_frame;
++ int i,j;
++ struct sch_ep *cur_sch_ep;
++ int ep_offset;
++ int ep_interval;
++ int ep_cs_count;
++ int tt_isoc_interval; //for isoc tt check
++ int cur_tt_isoc_interval; //for isoc tt check
++ int tmp_offset;
++ int tmp_interval;
++
++ is_cs = 0;
++
++ tt_isoc_interval = interval<<3; //frame to mframe
++ if(is_in){
++ is_cs = 1;
++ }
++ s_frame = offset/8;
++ s_mframe = offset%8;
++ ss_cs_count = (maxp + (188 - 1))/188;
++ if(is_cs){
++ cs_mframe = offset%8 + 2 + ss_cs_count;
++ if (cs_mframe <= 6)
++ ss_cs_count += 2;
++ else if (cs_mframe == 7)
++ ss_cs_count++;
++ else if (cs_mframe > 8)
++ return -1;
++ }
++ max_bw = 0;
++ if(is_in){
++ i=2;
++ }
++ for(cur_mframe = offset+i; i<ss_cs_count; cur_mframe++, i++){
++ bw_required = 0;
++ for(j=0; j<MAX_EP_NUM; j++){
++ cur_sch_ep = (struct sch_ep *)hs_eps[j];
++ if(cur_sch_ep == NULL){
++ continue;
++ }
++ ep_offset = cur_sch_ep->offset;
++ ep_interval = cur_sch_ep->interval;
++ if(cur_sch_ep->isTT && cur_sch_ep->ep_type == USB_EP_ISOC){
++ //isoc tt
++ //check if mframe offset overlap
++ //if overlap, add 188 to the bw
++ cur_tt_isoc_interval = ep_interval<<3;
++ if(cur_tt_isoc_interval >= tt_isoc_interval){
++ tmp_offset = (ep_offset+cur_tt_isoc_interval) - cur_mframe;
++ tmp_interval = tt_isoc_interval;
++ }
++ else{
++ tmp_offset = (cur_mframe+tt_isoc_interval) - ep_offset;
++ tmp_interval = cur_tt_isoc_interval;
++ }
++ if(cur_sch_ep->is_in){
++ if((tmp_offset%tmp_interval >=2) && (tmp_offset%tmp_interval <= cur_sch_ep->cs_count)){
++ bw_required += 188;
++ }
++ }
++ else{
++ if(tmp_offset%tmp_interval <= cur_sch_ep->cs_count){
++ bw_required += 188;
++ }
++ }
++
++ }
++ else if(cur_sch_ep->ep_type == USB_EP_INT || cur_sch_ep->ep_type == USB_EP_ISOC){
++ //check if mframe
++ if(ep_interval >= tt_isoc_interval){
++ tmp_offset = (ep_offset+ep_interval) - cur_mframe;
++ tmp_interval = tt_isoc_interval;
++ }
++ else{
++ tmp_offset = (cur_mframe+tt_isoc_interval) - ep_offset;
++ tmp_interval = ep_interval;
++ }
++ if(tmp_offset%tmp_interval == 0){
++ bw_required += cur_sch_ep->bw_cost;
++ }
++ }
++ }
++ bw_required += 188;
++ if(bw_required > max_bw){
++ max_bw = bw_required;
++ }
++ }
++ return max_bw;
++}
++
++int count_tt_intr_bw(int interval, int frame_offset){
++ //check all eps in tt_intr_eps
++ int ret;
++ int i,j;
++ int ep_offset;
++ int ep_interval;
++ int tmp_offset;
++ int tmp_interval;
++ ret = SCH_SUCCESS;
++ struct sch_ep *cur_sch_ep;
++
++ for(i=0; i<MAX_EP_NUM; i++){
++ cur_sch_ep = (struct sch_ep *)tt_intr_eps[i];
++ if(cur_sch_ep == NULL){
++ continue;
++ }
++ ep_offset = cur_sch_ep->offset;
++ ep_interval = cur_sch_ep->interval;
++ if(ep_interval >= interval){
++ tmp_offset = ep_offset + ep_interval - frame_offset;
++ tmp_interval = interval;
++ }
++ else{
++ tmp_offset = frame_offset + interval - ep_offset;
++ tmp_interval = ep_interval;
++ }
++
++ if(tmp_offset%tmp_interval==0){
++ return SCH_FAIL;
++ }
++ }
++ return SCH_SUCCESS;
++}
++
++struct sch_ep * mtk_xhci_scheduler_remove_ep(int dev_speed, int is_in, int isTT, int ep_type, mtk_u32 *ep){
++ int i;
++ struct sch_ep **ep_array;
++ struct sch_ep *cur_ep;
++
++ if (is_in && dev_speed == USB_SPEED_SUPER) {
++ ep_array = (struct sch_ep **)ss_in_eps;
++ }
++ else if (dev_speed == USB_SPEED_SUPER) {
++ ep_array = (struct sch_ep **)ss_out_eps;
++ }
++ else if (dev_speed == USB_SPEED_HIGH || (isTT && ep_type == USB_EP_ISOC)) {
++ ep_array = (struct sch_ep **)hs_eps;
++ }
++ else {
++ ep_array = (struct sch_ep **)tt_intr_eps;
++ }
++ for (i = 0; i < MAX_EP_NUM; i++) {
++ cur_ep = (struct sch_ep *)ep_array[i];
++ if(cur_ep != NULL && cur_ep->ep == ep){
++ ep_array[i] = NULL;
++ return cur_ep;
++ }
++ }
++ return NULL;
++}
++
++int mtk_xhci_scheduler_add_ep(int dev_speed, int is_in, int isTT, int ep_type, int maxp, int interval, int burst
++ , int mult, mtk_u32 *ep, mtk_u32 *ep_ctx, struct sch_ep *sch_ep){
++ mtk_u32 bPkts = 0;
++ mtk_u32 bCsCount = 0;
++ mtk_u32 bBm = 1;
++ mtk_u32 bOffset = 0;
++ mtk_u32 bRepeat = 0;
++ int ret;
++ struct mtk_xhci_ep_ctx *temp_ep_ctx;
++ int td_size;
++ int mframe_idx, frame_idx;
++ int bw_cost;
++ int cur_bw, best_bw, best_bw_idx,repeat, max_repeat, best_bw_repeat;
++ int cur_offset, cs_mframe;
++ int break_out;
++ int frame_interval;
++
++ printk(KERN_ERR "add_ep parameters, dev_speed %d, is_in %d, isTT %d, ep_type %d, maxp %d, interval %d, burst %d, mult %d, ep 0x%x, ep_ctx 0x%x, sch_ep 0x%x\n", dev_speed, is_in, isTT, ep_type, maxp
++ , interval, burst, mult, ep, ep_ctx, sch_ep);
++ if(isTT && ep_type == USB_EP_INT && ((dev_speed == USB_SPEED_LOW) || (dev_speed == USB_SPEED_FULL))){
++ frame_interval = interval >> 3;
++ for(frame_idx=0; frame_idx<frame_interval; frame_idx++){
++ printk(KERN_ERR "check tt_intr_bw interval %d, frame_idx %d\n", frame_interval, frame_idx);
++ if(count_tt_intr_bw(frame_interval, frame_idx) == SCH_SUCCESS){
++ printk(KERN_ERR "check OK............\n");
++ bOffset = frame_idx<<3;
++ bPkts = 1;
++ bCsCount = 3;
++ bw_cost = maxp;
++ bRepeat = 0;
++ if(add_sch_ep(dev_speed, is_in, isTT, ep_type, maxp, frame_interval, burst, mult
++ , bOffset, bRepeat, bPkts, bCsCount, bBm, maxp, ep, sch_ep) == SCH_FAIL){
++ return SCH_FAIL;
++ }
++ ret = SCH_SUCCESS;
++ break;
++ }
++ }
++ }
++ else if(isTT && ep_type == USB_EP_ISOC){
++ best_bw = HS_BW_BOUND;
++ best_bw_idx = -1;
++ cur_bw = 0;
++ td_size = maxp;
++ break_out = 0;
++ frame_interval = interval>>3;
++ for(frame_idx=0; frame_idx<frame_interval && !break_out; frame_idx++){
++ for(mframe_idx=0; mframe_idx<8; mframe_idx++){
++ cur_offset = (frame_idx*8) + mframe_idx;
++ cur_bw = count_tt_isoc_bw(is_in, maxp, frame_interval, cur_offset, td_size);
++ if(cur_bw > 0 && cur_bw < best_bw){
++ best_bw_idx = cur_offset;
++ best_bw = cur_bw;
++ if(cur_bw == td_size || cur_bw < (HS_BW_BOUND>>1)){
++ break_out = 1;
++ break;
++ }
++ }
++ }
++ }
++ if(best_bw_idx == -1){
++ return SCH_FAIL;
++ }
++ else{
++ bOffset = best_bw_idx;
++ bPkts = 1;
++ bCsCount = (maxp + (188 - 1)) / 188;
++ if(is_in){
++ cs_mframe = bOffset%8 + 2 + bCsCount;
++ if (cs_mframe <= 6)
++ bCsCount += 2;
++ else if (cs_mframe == 7)
++ bCsCount++;
++ }
++ bw_cost = 188;
++ bRepeat = 0;
++ if(add_sch_ep( dev_speed, is_in, isTT, ep_type, maxp, interval, burst, mult
++ , bOffset, bRepeat, bPkts, bCsCount, bBm, bw_cost, ep, sch_ep) == SCH_FAIL){
++ return SCH_FAIL;
++ }
++ ret = SCH_SUCCESS;
++ }
++ }
++ else if((dev_speed == USB_SPEED_FULL || dev_speed == USB_SPEED_LOW) && ep_type == USB_EP_INT){
++ bPkts = 1;
++ ret = SCH_SUCCESS;
++ }
++ else if(dev_speed == USB_SPEED_FULL && ep_type == USB_EP_ISOC){
++ bPkts = 1;
++ ret = SCH_SUCCESS;
++ }
++ else if(dev_speed == USB_SPEED_HIGH && (ep_type == USB_EP_INT || ep_type == USB_EP_ISOC)){
++ best_bw = HS_BW_BOUND;
++ best_bw_idx = -1;
++ cur_bw = 0;
++ td_size = maxp*(burst+1);
++ for(cur_offset = 0; cur_offset<interval; cur_offset++){
++ cur_bw = count_hs_bw(ep_type, maxp, interval, cur_offset, td_size);
++ if(cur_bw > 0 && cur_bw < best_bw){
++ best_bw_idx = cur_offset;
++ best_bw = cur_bw;
++ if(cur_bw == td_size || cur_bw < (HS_BW_BOUND>>1)){
++ break;
++ }
++ }
++ }
++ if(best_bw_idx == -1){
++ return SCH_FAIL;
++ }
++ else{
++ bOffset = best_bw_idx;
++ bPkts = burst + 1;
++ bCsCount = 0;
++ bw_cost = td_size;
++ bRepeat = 0;
++ if(add_sch_ep(dev_speed, is_in, isTT, ep_type, maxp, interval, burst, mult
++ , bOffset, bRepeat, bPkts, bCsCount, bBm, bw_cost, ep, sch_ep) == SCH_FAIL){
++ return SCH_FAIL;
++ }
++ ret = SCH_SUCCESS;
++ }
++ }
++ else if(dev_speed == USB_SPEED_SUPER && (ep_type == USB_EP_INT || ep_type == USB_EP_ISOC)){
++ best_bw = SS_BW_BOUND;
++ best_bw_idx = -1;
++ cur_bw = 0;
++ td_size = maxp * (mult+1) * (burst+1);
++ if(mult == 0){
++ max_repeat = 0;
++ }
++ else{
++ max_repeat = (interval-1)/(mult+1);
++ }
++ break_out = 0;
++ for(frame_idx = 0; (frame_idx < interval) && !break_out; frame_idx++){
++ for(repeat = max_repeat; repeat >= 0; repeat--){
++ cur_bw = count_ss_bw(is_in, ep_type, maxp, interval, burst, mult, frame_idx
++ , repeat, td_size);
++ printk(KERN_ERR "count_ss_bw, frame_idx %d, repeat %d, td_size %d, result bw %d\n"
++ , frame_idx, repeat, td_size, cur_bw);
++ if(cur_bw > 0 && cur_bw < best_bw){
++ best_bw_idx = frame_idx;
++ best_bw_repeat = repeat;
++ best_bw = cur_bw;
++ if(cur_bw <= td_size || cur_bw < (HS_BW_BOUND>>1)){
++ break_out = 1;
++ break;
++ }
++ }
++ }
++ }
++ printk(KERN_ERR "final best idx %d, best repeat %d\n", best_bw_idx, best_bw_repeat);
++ if(best_bw_idx == -1){
++ return SCH_FAIL;
++ }
++ else{
++ bOffset = best_bw_idx;
++ bCsCount = 0;
++ bRepeat = best_bw_repeat;
++ if(bRepeat == 0){
++ bw_cost = (burst+1)*(mult+1)*maxp;
++ bPkts = (burst+1)*(mult+1);
++ }
++ else{
++ bw_cost = (burst+1)*maxp;
++ bPkts = (burst+1);
++ }
++ if(add_sch_ep(dev_speed, is_in, isTT, ep_type, maxp, interval, burst, mult
++ , bOffset, bRepeat, bPkts, bCsCount, bBm, bw_cost, ep, sch_ep) == SCH_FAIL){
++ return SCH_FAIL;
++ }
++ ret = SCH_SUCCESS;
++ }
++ }
++ else{
++ bPkts = 1;
++ ret = SCH_SUCCESS;
++ }
++ if(ret == SCH_SUCCESS){
++ temp_ep_ctx = (struct mtk_xhci_ep_ctx *)ep_ctx;
++ temp_ep_ctx->reserved[0] |= (BPKTS(bPkts) | BCSCOUNT(bCsCount) | BBM(bBm));
++ temp_ep_ctx->reserved[1] |= (BOFFSET(bOffset) | BREPEAT(bRepeat));
++
++ printk(KERN_DEBUG "[DBG] BPKTS: %x, BCSCOUNT: %x, BBM: %x\n", bPkts, bCsCount, bBm);
++ printk(KERN_DEBUG "[DBG] BOFFSET: %x, BREPEAT: %x\n", bOffset, bRepeat);
++ return SCH_SUCCESS;
++ }
++ else{
++ return SCH_FAIL;
++ }
++}
+diff --git a/drivers/usb/host/xhci-mtk-scheduler.h b/drivers/usb/host/xhci-mtk-scheduler.h
+new file mode 100644
+index 0000000..c55dfb1
+--- /dev/null
++++ b/drivers/usb/host/xhci-mtk-scheduler.h
+@@ -0,0 +1,77 @@
++#ifndef _XHCI_MTK_SCHEDULER_H
++#define _XHCI_MTK_SCHEDULER_H
++
++#define MTK_SCH_NEW 1
++
++#define SCH_SUCCESS 1
++#define SCH_FAIL 0
++
++#define MAX_EP_NUM 64
++#define SS_BW_BOUND 51000
++#define HS_BW_BOUND 6144
++
++#define USB_EP_CONTROL 0
++#define USB_EP_ISOC 1
++#define USB_EP_BULK 2
++#define USB_EP_INT 3
++
++#define USB_SPEED_LOW 1
++#define USB_SPEED_FULL 2
++#define USB_SPEED_HIGH 3
++#define USB_SPEED_SUPER 5
++
++/* mtk scheduler bitmasks */
++#define BPKTS(p) ((p) & 0x3f)
++#define BCSCOUNT(p) (((p) & 0x7) << 8)
++#define BBM(p) ((p) << 11)
++#define BOFFSET(p) ((p) & 0x3fff)
++#define BREPEAT(p) (((p) & 0x7fff) << 16)
++
++
++#if 1
++typedef unsigned int mtk_u32;
++typedef unsigned long long mtk_u64;
++#endif
++
++#define NULL ((void *)0)
++
++struct mtk_xhci_ep_ctx {
++ mtk_u32 ep_info;
++ mtk_u32 ep_info2;
++ mtk_u64 deq;
++ mtk_u32 tx_info;
++ /* offset 0x14 - 0x1f reserved for HC internal use */
++ mtk_u32 reserved[3];
++};
++
++
++struct sch_ep
++{
++ //device info
++ int dev_speed;
++ int isTT;
++ //ep info
++ int is_in;
++ int ep_type;
++ int maxp;
++ int interval;
++ int burst;
++ int mult;
++ //scheduling info
++ int offset;
++ int repeat;
++ int pkts;
++ int cs_count;
++ int burst_mode;
++ //other
++ int bw_cost; //bandwidth cost in each repeat; including overhead
++ mtk_u32 *ep; //address of usb_endpoint pointer
++};
++
++int mtk_xhci_scheduler_init(void);
++int mtk_xhci_scheduler_add_ep(int dev_speed, int is_in, int isTT, int ep_type, int maxp, int interval, int burst
++ , int mult, mtk_u32 *ep, mtk_u32 *ep_ctx, struct sch_ep *sch_ep);
++struct sch_ep * mtk_xhci_scheduler_remove_ep(int dev_speed, int is_in, int isTT, int ep_type, mtk_u32 *ep);
++
++
++#endif
+diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
+new file mode 100644
+index 0000000..2eed0a1
+--- /dev/null
++++ b/drivers/usb/host/xhci-mtk.c
+@@ -0,0 +1,265 @@
++#include "xhci-mtk.h"
++#include "xhci-mtk-power.h"
++#include "xhci.h"
++#include "mtk-phy.h"
++#ifdef CONFIG_C60802_SUPPORT
++#include "mtk-phy-c60802.h"
++#endif
++#include "xhci-mtk-scheduler.h"
++#include <linux/kernel.h> /* printk() */
++#include <linux/slab.h>
++#include <linux/delay.h>
++#include <asm/uaccess.h>
++#include <linux/dma-mapping.h>
++#include <linux/platform_device.h>
++
++void setInitialReg(void )
++{
++ __u32 __iomem *addr;
++ u32 temp;
++
++ /* set SSUSB DMA burst size to 128B */
++ addr = SSUSB_U3_XHCI_BASE + SSUSB_HDMA_CFG;
++ temp = SSUSB_HDMA_CFG_MT7621_VALUE;
++ writel(temp, addr);
++
++ /* extend U3 LTSSM Polling.LFPS timeout value */
++ addr = SSUSB_U3_XHCI_BASE + U3_LTSSM_TIMING_PARAMETER3;
++ temp = U3_LTSSM_TIMING_PARAMETER3_VALUE;
++ writel(temp, addr);
++
++ /* EOF */
++ addr = SSUSB_U3_XHCI_BASE + SYNC_HS_EOF;
++ temp = SYNC_HS_EOF_VALUE;
++ writel(temp, addr);
++
++#if defined (CONFIG_PERIODIC_ENP)
++ /* HSCH_CFG1: SCH2_FIFO_DEPTH */
++ addr = SSUSB_U3_XHCI_BASE + HSCH_CFG1;
++ temp = readl(addr);
++ temp &= ~(0x3 << SCH2_FIFO_DEPTH_OFFSET);
++ writel(temp, addr);
++#endif
++
++ /* Doorbell handling */
++ addr = SIFSLV_IPPC + SSUSB_IP_SPAR0;
++ temp = 0x1;
++ writel(temp, addr);
++
++ /* Set SW PLL Stable mode to 1 for U2 LPM device remote wakeup */
++ /* Port 0 */
++ addr = U2_PHY_BASE + U2_PHYD_CR1;
++ temp = readl(addr);
++ temp &= ~(0x3 << 18);
++ temp |= (1 << 18);
++ writel(temp, addr);
++
++ /* Port 1 */
++ addr = U2_PHY_BASE_P1 + U2_PHYD_CR1;
++ temp = readl(addr);
++ temp &= ~(0x3 << 18);
++ temp |= (1 << 18);
++ writel(temp, addr);
++}
++
++
++void setLatchSel(void){
++ __u32 __iomem *latch_sel_addr;
++ u32 latch_sel_value;
++ latch_sel_addr = U3_PIPE_LATCH_SEL_ADD;
++ latch_sel_value = ((U3_PIPE_LATCH_TX)<<2) | (U3_PIPE_LATCH_RX);
++ writel(latch_sel_value, latch_sel_addr);
++}
++
++void reinitIP(void){
++ __u32 __iomem *ip_reset_addr;
++ u32 ip_reset_value;
++
++ enableAllClockPower();
++ mtk_xhci_scheduler_init();
++}
++
++void dbg_prb_out(void){
++ mtk_probe_init(0x0f0f0f0f);
++ mtk_probe_out(0xffffffff);
++ mtk_probe_out(0x01010101);
++ mtk_probe_out(0x02020202);
++ mtk_probe_out(0x04040404);
++ mtk_probe_out(0x08080808);
++ mtk_probe_out(0x10101010);
++ mtk_probe_out(0x20202020);
++ mtk_probe_out(0x40404040);
++ mtk_probe_out(0x80808080);
++ mtk_probe_out(0x55555555);
++ mtk_probe_out(0xaaaaaaaa);
++}
++
++
++
++///////////////////////////////////////////////////////////////////////////////
++
++#define RET_SUCCESS 0
++#define RET_FAIL 1
++
++static int dbg_u3w(int argc, char**argv)
++{
++ int u4TimingValue;
++ char u1TimingValue;
++ int u4TimingAddress;
++
++ if (argc<3)
++ {
++ printk(KERN_ERR "Arg: address value\n");
++ return RET_FAIL;
++ }
++ u3phy_init();
++
++ u4TimingAddress = (int)simple_strtol(argv[1], &argv[1], 16);
++ u4TimingValue = (int)simple_strtol(argv[2], &argv[2], 16);
++ u1TimingValue = u4TimingValue & 0xff;
++ /* access MMIO directly */
++ writel(u1TimingValue, u4TimingAddress);
++ printk(KERN_ERR "Write done\n");
++ return RET_SUCCESS;
++
++}
++
++static int dbg_u3r(int argc, char**argv)
++{
++ char u1ReadTimingValue;
++ int u4TimingAddress;
++ if (argc<2)
++ {
++ printk(KERN_ERR "Arg: address\n");
++ return 0;
++ }
++ u3phy_init();
++ mdelay(500);
++ u4TimingAddress = (int)simple_strtol(argv[1], &argv[1], 16);
++ /* access MMIO directly */
++ u1ReadTimingValue = readl(u4TimingAddress);
++ printk(KERN_ERR "Value = 0x%x\n", u1ReadTimingValue);
++ return 0;
++}
++
++static int dbg_u3init(int argc, char**argv)
++{
++ int ret;
++ ret = u3phy_init();
++ printk(KERN_ERR "phy registers and operations initial done\n");
++ if(u3phy_ops->u2_slew_rate_calibration){
++ u3phy_ops->u2_slew_rate_calibration(u3phy);
++ }
++ else{
++ printk(KERN_ERR "WARN: PHY doesn't implement u2 slew rate calibration function\n");
++ }
++ if(u3phy_ops->init(u3phy) == PHY_TRUE)
++ return RET_SUCCESS;
++ return RET_FAIL;
++}
++
++void dbg_setU1U2(int argc, char**argv){
++ struct xhci_hcd *xhci;
++ int u1_value;
++ int u2_value;
++ u32 port_id, temp;
++ u32 __iomem *addr;
++
++ if (argc<3)
++ {
++ printk(KERN_ERR "Arg: u1value u2value\n");
++ return RET_FAIL;
++ }
++
++ u1_value = (int)simple_strtol(argv[1], &argv[1], 10);
++ u2_value = (int)simple_strtol(argv[2], &argv[2], 10);
++ addr = (SSUSB_U3_XHCI_BASE + 0x424);
++ temp = readl(addr);
++ temp = temp & (~(0x0000ffff));
++ temp = temp | u1_value | (u2_value<<8);
++ writel(temp, addr);
++}
++///////////////////////////////////////////////////////////////////////////////
++
++int call_function(char *buf)
++{
++ int i;
++ int argc;
++ char *argv[80];
++
++ argc = 0;
++ do
++ {
++ argv[argc] = strsep(&buf, " ");
++ printk(KERN_DEBUG "[%d] %s\r\n", argc, argv[argc]);
++ argc++;
++ } while (buf);
++ if (!strcmp("dbg.r", argv[0]))
++ dbg_prb_out();
++ else if (!strcmp("dbg.u3w", argv[0]))
++ dbg_u3w(argc, argv);
++ else if (!strcmp("dbg.u3r", argv[0]))
++ dbg_u3r(argc, argv);
++ else if (!strcmp("dbg.u3i", argv[0]))
++ dbg_u3init(argc, argv);
++ else if (!strcmp("pw.u1u2", argv[0]))
++ dbg_setU1U2(argc, argv);
++ return 0;
++}
++
++long xhci_mtk_test_unlock_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
++{
++ char w_buf[200];
++ char r_buf[200] = "this is a test";
++ int len = 200;
++
++ switch (cmd) {
++ case IOCTL_READ:
++ copy_to_user((char *) arg, r_buf, len);
++ printk(KERN_DEBUG "IOCTL_READ: %s\r\n", r_buf);
++ break;
++ case IOCTL_WRITE:
++ copy_from_user(w_buf, (char *) arg, len);
++ printk(KERN_DEBUG "IOCTL_WRITE: %s\r\n", w_buf);
++
++ //invoke function
++ return call_function(w_buf);
++ break;
++ default:
++ return -ENOTTY;
++ }
++
++ return len;
++}
++
++int xhci_mtk_test_open(struct inode *inode, struct file *file)
++{
++
++ printk(KERN_DEBUG "xhci_mtk_test open: successful\n");
++ return 0;
++}
++
++int xhci_mtk_test_release(struct inode *inode, struct file *file)
++{
++
++ printk(KERN_DEBUG "xhci_mtk_test release: successful\n");
++ return 0;
++}
++
++ssize_t xhci_mtk_test_read(struct file *file, char *buf, size_t count, loff_t *ptr)
++{
++
++ printk(KERN_DEBUG "xhci_mtk_test read: returning zero bytes\n");
++ return 0;
++}
++
++ssize_t xhci_mtk_test_write(struct file *file, const char *buf, size_t count, loff_t * ppos)
++{
++
++ printk(KERN_DEBUG "xhci_mtk_test write: accepting zero bytes\n");
++ return 0;
++}
++
++
++
++
+diff --git a/drivers/usb/host/xhci-mtk.h b/drivers/usb/host/xhci-mtk.h
+new file mode 100644
+index 0000000..0f2d5e8
+--- /dev/null
++++ b/drivers/usb/host/xhci-mtk.h
+@@ -0,0 +1,120 @@
++#ifndef _XHCI_MTK_H
++#define _XHCI_MTK_H
++
++#include <linux/usb.h>
++#include "xhci.h"
++
++#define SSUSB_U3_XHCI_BASE 0xBE1C0000
++#define SSUSB_U3_MAC_BASE 0xBE1C2400
++#define SSUSB_U3_SYS_BASE 0xBE1C2600
++#define SSUSB_U2_SYS_BASE 0xBE1C3400
++#define SSUB_SIF_SLV_TOP 0xBE1D0000
++#define SIFSLV_IPPC (SSUB_SIF_SLV_TOP + 0x700)
++
++#define U3_PIPE_LATCH_SEL_ADD SSUSB_U3_MAC_BASE + 0x130
++#define U3_PIPE_LATCH_TX 0
++#define U3_PIPE_LATCH_RX 0
++
++#define U3_UX_EXIT_LFPS_TIMING_PAR 0xa0
++#define U3_REF_CK_PAR 0xb0
++#define U3_RX_UX_EXIT_LFPS_REF_OFFSET 8
++#define U3_RX_UX_EXIT_LFPS_REF 3
++#define U3_REF_CK_VAL 10
++
++#define U3_TIMING_PULSE_CTRL 0xb4
++#define CNT_1US_VALUE 63 //62.5MHz:63, 70MHz:70, 80MHz:80, 100MHz:100, 125MHz:125
++
++#define USB20_TIMING_PARAMETER 0x40
++#define TIME_VALUE_1US 63 //62.5MHz:63, 80MHz:80, 100MHz:100, 125MHz:125
++
++#define LINK_PM_TIMER 0x8
++#define PM_LC_TIMEOUT_VALUE 3
++
++#define XHCI_IMOD 0x624
++#define XHCI_IMOD_MT7621_VALUE 0x10
++
++#define SSUSB_HDMA_CFG 0x950
++#define SSUSB_HDMA_CFG_MT7621_VALUE 0x10E0E0C
++
++#define U3_LTSSM_TIMING_PARAMETER3 0x2514
++#define U3_LTSSM_TIMING_PARAMETER3_VALUE 0x3E8012C
++
++#define U2_PHYD_CR1 0x64
++
++#define SSUSB_IP_SPAR0 0xC8
++
++#define SYNC_HS_EOF 0x938
++#define SYNC_HS_EOF_VALUE 0x201F3
++
++#define HSCH_CFG1 0x960
++#define SCH2_FIFO_DEPTH_OFFSET 16
++
++
++#define SSUSB_IP_PW_CTRL (SIFSLV_IPPC+0x0)
++#define SSUSB_IP_SW_RST (1<<0)
++#define SSUSB_IP_PW_CTRL_1 (SIFSLV_IPPC+0x4)
++#define SSUSB_IP_PDN (1<<0)
++#define SSUSB_U3_CTRL(p) (SIFSLV_IPPC+0x30+(p*0x08))
++#define SSUSB_U3_PORT_DIS (1<<0)
++#define SSUSB_U3_PORT_PDN (1<<1)
++#define SSUSB_U3_PORT_HOST_SEL (1<<2)
++#define SSUSB_U3_PORT_CKBG_EN (1<<3)
++#define SSUSB_U3_PORT_MAC_RST (1<<4)
++#define SSUSB_U3_PORT_PHYD_RST (1<<5)
++#define SSUSB_U2_CTRL(p) (SIFSLV_IPPC+(0x50)+(p*0x08))
++#define SSUSB_U2_PORT_DIS (1<<0)
++#define SSUSB_U2_PORT_PDN (1<<1)
++#define SSUSB_U2_PORT_HOST_SEL (1<<2)
++#define SSUSB_U2_PORT_CKBG_EN (1<<3)
++#define SSUSB_U2_PORT_MAC_RST (1<<4)
++#define SSUSB_U2_PORT_PHYD_RST (1<<5)
++#define SSUSB_IP_CAP (SIFSLV_IPPC+0x024)
++
++#define SSUSB_U3_PORT_NUM(p) (p & 0xff)
++#define SSUSB_U2_PORT_NUM(p) ((p>>8) & 0xff)
++
++
++#define XHCI_MTK_TEST_MAJOR 234
++#define DEVICE_NAME "xhci_mtk_test"
++
++#define CLI_MAGIC 'CLI'
++#define IOCTL_READ _IOR(CLI_MAGIC, 0, int)
++#define IOCTL_WRITE _IOW(CLI_MAGIC, 1, int)
++
++void reinitIP(void);
++void setInitialReg(void);
++void dbg_prb_out(void);
++int call_function(char *buf);
++
++long xhci_mtk_test_unlock_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
++int xhci_mtk_test_open(struct inode *inode, struct file *file);
++int xhci_mtk_test_release(struct inode *inode, struct file *file);
++ssize_t xhci_mtk_test_read(struct file *file, char *buf, size_t count, loff_t *ptr);
++ssize_t xhci_mtk_test_write(struct file *file, const char *buf, size_t count, loff_t * ppos);
++
++/*
++ mediatek probe out
++*/
++/************************************************************************************/
++
++#define SW_PRB_OUT_ADDR (SIFSLV_IPPC+0xc0)
++#define PRB_MODULE_SEL_ADDR (SIFSLV_IPPC+0xbc)
++
++static inline void mtk_probe_init(const u32 byte){
++ __u32 __iomem *ptr = (__u32 __iomem *) PRB_MODULE_SEL_ADDR;
++ writel(byte, ptr);
++}
++
++static inline void mtk_probe_out(const u32 value){
++ __u32 __iomem *ptr = (__u32 __iomem *) SW_PRB_OUT_ADDR;
++ writel(value, ptr);
++}
++
++static inline u32 mtk_probe_value(void){
++ __u32 __iomem *ptr = (__u32 __iomem *) SW_PRB_OUT_ADDR;
++
++ return readl(ptr);
++}
++
++
++#endif
+diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
+index 8abda5c..a11b82f 100644
+--- a/drivers/usb/host/xhci-plat.c
++++ b/drivers/usb/host/xhci-plat.c
+@@ -27,6 +27,13 @@ static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
+ * dev struct in order to setup MSI
+ */
+ xhci->quirks |= XHCI_PLAT;
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ /* MTK host controller gives a spurious successful event after a
++ * short transfer. Ignore it.
++ */
++ xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
++ xhci->quirks |= XHCI_LPM_SUPPORT;
++#endif
+ }
+
+ /* called during probe() after chip reset completes */
+@@ -99,13 +106,19 @@ static int xhci_plat_probe(struct platform_device *pdev)
+
+ driver = &xhci_plat_xhci_driver;
+
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ irq = XHC_IRQ;
++#else
+ irq = platform_get_irq(pdev, 0);
++#endif
+ if (irq < 0)
+ return -ENODEV;
+
++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
++#endif
+
+ /* Initialize dma_mask and coherent_dma_mask to 32-bits */
+ ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
+@@ -120,8 +133,13 @@ static int xhci_plat_probe(struct platform_device *pdev)
+ if (!hcd)
+ return -ENOMEM;
+
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ hcd->rsrc_start = (uint32_t)XHC_IO_START;
++ hcd->rsrc_len = XHC_IO_LENGTH;
++#else
+ hcd->rsrc_start = res->start;
+ hcd->rsrc_len = resource_size(res);
++#endif
+
+ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
+ driver->description)) {
+diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
+index 0ed64eb..415bec0 100644
+--- a/drivers/usb/host/xhci-ring.c
++++ b/drivers/usb/host/xhci-ring.c
+@@ -232,7 +232,6 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring,
+ */
+ if (!chain && !more_trbs_coming)
+ break;
+-
+ /* If we're not dealing with 0.95 hardware or
+ * isoc rings on AMD 0.96 host,
+ * carry over the chain bit of the previous TRB
+@@ -268,16 +267,20 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring,
+ static inline int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring,
+ unsigned int num_trbs)
+ {
++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ int num_trbs_in_deq_seg;
++#endif
+
+ if (ring->num_trbs_free < num_trbs)
+ return 0;
+
++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ if (ring->type != TYPE_COMMAND && ring->type != TYPE_EVENT) {
+ num_trbs_in_deq_seg = ring->dequeue - ring->deq_seg->trbs;
+ if (ring->num_trbs_free < num_trbs + num_trbs_in_deq_seg)
+ return 0;
+ }
++#endif
+
+ return 1;
+ }
+@@ -2992,6 +2995,7 @@ static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
+ next = ring->enqueue;
+
+ while (last_trb(xhci, ring, ring->enq_seg, next)) {
++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ /* If we're not dealing with 0.95 hardware or isoc rings
+ * on AMD 0.96 host, clear the chain bit.
+ */
+@@ -3001,7 +3005,9 @@ static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
+ next->link.control &= cpu_to_le32(~TRB_CHAIN);
+ else
+ next->link.control |= cpu_to_le32(TRB_CHAIN);
+-
++#else
++ next->link.control &= cpu_to_le32(~TRB_CHAIN);
++#endif
+ wmb();
+ next->link.control ^= cpu_to_le32(TRB_CYCLE);
+
+@@ -3131,6 +3137,9 @@ static void giveback_first_trb(struct xhci_hcd *xhci, int slot_id,
+ start_trb->field[3] |= cpu_to_le32(start_cycle);
+ else
+ start_trb->field[3] &= cpu_to_le32(~TRB_CYCLE);
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ wmb();
++#endif
+ xhci_ring_ep_doorbell(xhci, slot_id, ep_index, stream_id);
+ }
+
+@@ -3186,6 +3195,29 @@ static u32 xhci_td_remainder(unsigned int remainder)
+ return (remainder >> 10) << 17;
+ }
+
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++static u32 mtk_xhci_td_remainder(unsigned int td_transfer_size, unsigned int td_running_total, unsigned int maxp, unsigned trb_buffer_length)
++{
++ u32 max = 31;
++ int remainder, td_packet_count, packet_transferred;
++
++ //0 for the last TRB
++ //FIXME: need to workaround if there is ZLP in this TD
++ if (td_running_total + trb_buffer_length == td_transfer_size)
++ return 0;
++
++ //FIXME: need to take care of high-bandwidth (MAX_ESIT)
++ packet_transferred = (td_running_total /*+ trb_buffer_length*/) / maxp;
++ td_packet_count = DIV_ROUND_UP(td_transfer_size, maxp);
++ remainder = td_packet_count - packet_transferred;
++
++ if (remainder > max)
++ return max << 17;
++ else
++ return remainder << 17;
++}
++#endif
++
+ /*
+ * For xHCI 1.0 host controllers, TD size is the number of max packet sized
+ * packets remaining in the TD (*not* including this TRB).
+@@ -3323,6 +3355,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ }
+
+ /* Set the TRB length, TD size, and interrupter fields. */
++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ if (xhci->hci_version < 0x100) {
+ remainder = xhci_td_remainder(
+ urb->transfer_buffer_length -
+@@ -3332,6 +3365,13 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ trb_buff_len, total_packet_count, urb,
+ num_trbs - 1);
+ }
++#else
++ if (num_trbs > 1)
++ remainder = mtk_xhci_td_remainder(urb->transfer_buffer_length,
++ running_total, urb->ep->desc.wMaxPacketSize, trb_buff_len);
++#endif
++
++
+ length_field = TRB_LEN(trb_buff_len) |
+ remainder |
+ TRB_INTR_TARGET(0);
+@@ -3394,6 +3434,9 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ int running_total, trb_buff_len, ret;
+ unsigned int total_packet_count;
+ u64 addr;
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ int max_packet;
++#endif
+
+ if (urb->num_sgs)
+ return queue_bulk_sg_tx(xhci, mem_flags, urb, slot_id, ep_index);
+@@ -3419,6 +3462,25 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ running_total += TRB_MAX_BUFF_SIZE;
+ }
+ /* FIXME: this doesn't deal with URB_ZERO_PACKET - need one more */
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ switch(urb->dev->speed){
++ case USB_SPEED_SUPER:
++ max_packet = urb->ep->desc.wMaxPacketSize;
++ break;
++ case USB_SPEED_HIGH:
++ case USB_SPEED_FULL:
++ case USB_SPEED_LOW:
++ case USB_SPEED_WIRELESS:
++ case USB_SPEED_UNKNOWN:
++ default:
++ max_packet = urb->ep->desc.wMaxPacketSize & 0x7ff;
++ break;
++ }
++ if((urb->transfer_flags & URB_ZERO_PACKET)
++ && ((urb->transfer_buffer_length % max_packet) == 0)){
++ num_trbs++;
++ }
++#endif
+
+ ret = prepare_transfer(xhci, xhci->devs[slot_id],
+ ep_index, urb->stream_id,
+@@ -3478,6 +3540,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ field |= TRB_ISP;
+
+ /* Set the TRB length, TD size, and interrupter fields. */
++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ if (xhci->hci_version < 0x100) {
+ remainder = xhci_td_remainder(
+ urb->transfer_buffer_length -
+@@ -3487,6 +3550,10 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ trb_buff_len, total_packet_count, urb,
+ num_trbs - 1);
+ }
++#else
++ remainder = mtk_xhci_td_remainder(urb->transfer_buffer_length, running_total, max_packet, trb_buff_len);
++#endif
++
+ length_field = TRB_LEN(trb_buff_len) |
+ remainder |
+ TRB_INTR_TARGET(0);
+@@ -3576,7 +3643,11 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ field |= 0x1;
+
+ /* xHCI 1.0 6.4.1.2.1: Transfer Type field */
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ if (1) {
++#else
+ if (xhci->hci_version == 0x100) {
++#endif
+ if (urb->transfer_buffer_length > 0) {
+ if (setup->bRequestType & USB_DIR_IN)
+ field |= TRB_TX_TYPE(TRB_DATA_IN);
+@@ -3600,7 +3671,12 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ field = TRB_TYPE(TRB_DATA);
+
+ length_field = TRB_LEN(urb->transfer_buffer_length) |
++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ xhci_td_remainder(urb->transfer_buffer_length) |
++#else
++ //CC: MTK style, no scatter-gather for control transfer
++ 0 |
++#endif
+ TRB_INTR_TARGET(0);
+ if (urb->transfer_buffer_length > 0) {
+ if (setup->bRequestType & USB_DIR_IN)
+@@ -3611,7 +3687,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ length_field,
+ field | ep_ring->cycle_state);
+ }
+-
++
+ /* Save the DMA address of the last TRB in the TD */
+ td->last_trb = ep_ring->enqueue;
+
+@@ -3723,6 +3799,9 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ u64 start_addr, addr;
+ int i, j;
+ bool more_trbs_coming;
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ int max_packet;
++#endif
+
+ ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
+
+@@ -3736,6 +3815,21 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ start_trb = &ep_ring->enqueue->generic;
+ start_cycle = ep_ring->cycle_state;
+
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ switch(urb->dev->speed){
++ case USB_SPEED_SUPER:
++ max_packet = urb->ep->desc.wMaxPacketSize;
++ break;
++ case USB_SPEED_HIGH:
++ case USB_SPEED_FULL:
++ case USB_SPEED_LOW:
++ case USB_SPEED_WIRELESS:
++ case USB_SPEED_UNKNOWN:
++ max_packet = urb->ep->desc.wMaxPacketSize & 0x7ff;
++ break;
++ }
++#endif
++
+ urb_priv = urb->hcpriv;
+ /* Queue the first TRB, even if it's zero-length */
+ for (i = 0; i < num_tds; i++) {
+@@ -3807,9 +3901,13 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ } else {
+ td->last_trb = ep_ring->enqueue;
+ field |= TRB_IOC;
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ if (!(xhci->quirks & XHCI_AVOID_BEI)) {
++#else
+ if (xhci->hci_version == 0x100 &&
+ !(xhci->quirks &
+ XHCI_AVOID_BEI)) {
++#endif
+ /* Set BEI bit except for the last td */
+ if (i < num_tds - 1)
+ field |= TRB_BEI;
+@@ -3824,6 +3922,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ trb_buff_len = td_remain_len;
+
+ /* Set the TRB length, TD size, & interrupter fields. */
++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ if (xhci->hci_version < 0x100) {
+ remainder = xhci_td_remainder(
+ td_len - running_total);
+@@ -3833,6 +3932,10 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ total_packet_count, urb,
+ (trbs_per_td - j - 1));
+ }
++#else
++ remainder = mtk_xhci_td_remainder(urb->transfer_buffer_length, running_total, max_packet, trb_buff_len);
++#endif
++
+ length_field = TRB_LEN(trb_buff_len) |
+ remainder |
+ TRB_INTR_TARGET(0);
+diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
+index 924a6cc..27b7d2f 100644
+--- a/drivers/usb/host/xhci.c
++++ b/drivers/usb/host/xhci.c
+@@ -32,6 +32,16 @@
+ #include "xhci.h"
+ #include "xhci-trace.h"
+
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++#include <asm/uaccess.h>
++#include <linux/dma-mapping.h>
++#include <linux/platform_device.h>
++#include "mtk-phy.h"
++#include "xhci-mtk-scheduler.h"
++#include "xhci-mtk-power.h"
++#include "xhci-mtk.h"
++#endif
++
+ #define DRIVER_AUTHOR "Sarah Sharp"
+ #define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver"
+
+@@ -44,6 +54,18 @@ static unsigned int quirks;
+ module_param(quirks, uint, S_IRUGO);
+ MODULE_PARM_DESC(quirks, "Bit flags for quirks to be enabled as default");
+
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++long xhci_mtk_test_unlock_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
++static struct file_operations xhci_mtk_test_fops = {
++ .owner = THIS_MODULE,
++ .read = xhci_mtk_test_read,
++ .write = xhci_mtk_test_write,
++ .unlocked_ioctl = xhci_mtk_test_unlock_ioctl,
++ .open = xhci_mtk_test_open,
++ .release = xhci_mtk_test_release,
++};
++#endif
++
+ /* TODO: copied from ehci-hcd.c - can this be refactored? */
+ /*
+ * xhci_handshake - spin reading hc until handshake completes or fails
+@@ -196,7 +218,7 @@ int xhci_reset(struct xhci_hcd *xhci)
+ return ret;
+ }
+
+-#ifdef CONFIG_PCI
++#if defined (CONFIG_PCI) && !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ static int xhci_free_msi(struct xhci_hcd *xhci)
+ {
+ int i;
+@@ -399,6 +421,7 @@ static int xhci_try_enable_msi(struct usb_hcd *hcd)
+ return ret;
+ }
+ hcd->irq = pdev->irq;
++
+ return 0;
+ }
+
+@@ -442,6 +465,11 @@ static void compliance_mode_recovery(unsigned long arg)
+ "Attempting compliance mode recovery");
+ hcd = xhci->shared_hcd;
+
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ temp |= (1 << 31);
++ writel(temp, xhci->usb3_ports[i]);
++#endif
++
+ if (hcd->state == HC_STATE_SUSPENDED)
+ usb_hcd_resume_root_hub(hcd);
+
+@@ -491,6 +519,9 @@ bool xhci_compliance_mode_recovery_timer_quirk_check(void)
+ {
+ const char *dmi_product_name, *dmi_sys_vendor;
+
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ return true;
++#endif
+ dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
+ dmi_sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR);
+ if (!dmi_product_name || !dmi_sys_vendor)
+@@ -536,6 +567,10 @@ int xhci_init(struct usb_hcd *hcd)
+ xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+ "xHCI doesn't need link TRB QUIRK");
+ }
++
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ mtk_xhci_scheduler_init();
++#endif
+ retval = xhci_mem_init(xhci, GFP_KERNEL);
+ xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Finished xhci_init");
+
+@@ -620,7 +655,11 @@ int xhci_run(struct usb_hcd *hcd)
+ "// Set the interrupt modulation register");
+ temp = readl(&xhci->ir_set->irq_control);
+ temp &= ~ER_IRQ_INTERVAL_MASK;
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ temp |= (u32) 16;
++#else
+ temp |= (u32) 160;
++#endif
+ writel(temp, &xhci->ir_set->irq_control);
+
+ /* Set the HCD state before we enable the irqs */
+@@ -641,6 +680,9 @@ int xhci_run(struct usb_hcd *hcd)
+ xhci_queue_vendor_command(xhci, 0, 0, 0,
+ TRB_TYPE(TRB_NEC_GET_FW));
+
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ enableXhciAllPortPower(xhci);
++#endif
+ xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+ "Finished xhci_run for USB2 roothub");
+ return 0;
+@@ -970,7 +1012,6 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
+
+ /* If restore operation fails, re-initialize the HC during resume */
+ if ((temp & STS_SRE) || hibernated) {
+-
+ if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+ !(xhci_all_ports_seen_u0(xhci))) {
+ del_timer_sync(&xhci->comp_mode_recovery_timer);
+@@ -1569,6 +1610,13 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
+ u32 drop_flag;
+ u32 new_add_flags, new_drop_flags, new_slot_info;
+ int ret;
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++#if MTK_SCH_NEW
++ struct sch_ep *sch_ep = NULL;
++ int isTT;
++ int ep_type;
++#endif
++#endif
+
+ ret = xhci_check_args(hcd, udev, ep, 1, true, __func__);
+ if (ret <= 0)
+@@ -1626,6 +1674,40 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
+
+ xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep);
+
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++#if MTK_SCH_NEW
++ slot_ctx = xhci_get_slot_ctx(xhci, xhci->devs[udev->slot_id]->out_ctx);
++ if ((slot_ctx->tt_info & 0xff) > 0) {
++ isTT = 1;
++ }
++ else {
++ isTT = 0;
++ }
++ if (usb_endpoint_xfer_int(&ep->desc)) {
++ ep_type = USB_EP_INT;
++ }
++ else if (usb_endpoint_xfer_isoc(&ep->desc)) {
++ ep_type = USB_EP_ISOC;
++ }
++ else if (usb_endpoint_xfer_bulk(&ep->desc)) {
++ ep_type = USB_EP_BULK;
++ }
++ else
++ ep_type = USB_EP_CONTROL;
++
++ sch_ep = mtk_xhci_scheduler_remove_ep(udev->speed, usb_endpoint_dir_in(&ep->desc)
++ , isTT, ep_type, (mtk_u32 *)ep);
++ if (sch_ep != NULL) {
++ kfree(sch_ep);
++ }
++ else {
++ xhci_dbg(xhci, "[MTK]Doesn't find ep_sch instance when removing endpoint\n");
++ }
++#else
++ mtk_xhci_scheduler_remove_ep(xhci, udev, ep);
++#endif
++#endif
++
+ xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x, new slot info = %#x\n",
+ (unsigned int) ep->desc.bEndpointAddress,
+ udev->slot_id,
+@@ -1661,6 +1743,18 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
+ u32 new_add_flags, new_drop_flags, new_slot_info;
+ struct xhci_virt_device *virt_dev;
+ int ret = 0;
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ struct xhci_ep_ctx *in_ep_ctx;
++#if MTK_SCH_NEW
++ struct sch_ep *sch_ep;
++ int isTT;
++ int ep_type;
++ int maxp = 0;
++ int burst = 0;
++ int mult = 0;
++ int interval;
++#endif
++#endif
+
+ ret = xhci_check_args(hcd, udev, ep, 1, true, __func__);
+ if (ret <= 0) {
+@@ -1728,6 +1822,56 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
+ return -ENOMEM;
+ }
+
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ in_ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index);
++#if MTK_SCH_NEW
++ slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
++ if ((slot_ctx->tt_info & 0xff) > 0) {
++ isTT = 1;
++ }
++ else {
++ isTT = 0;
++ }
++ if (usb_endpoint_xfer_int(&ep->desc)) {
++ ep_type = USB_EP_INT;
++ }
++ else if (usb_endpoint_xfer_isoc(&ep->desc)) {
++ ep_type = USB_EP_ISOC;
++ }
++ else if (usb_endpoint_xfer_bulk(&ep->desc)) {
++ ep_type = USB_EP_BULK;
++ }
++ else
++ ep_type = USB_EP_CONTROL;
++
++ if (udev->speed == USB_SPEED_FULL || udev->speed == USB_SPEED_HIGH
++ || udev->speed == USB_SPEED_LOW) {
++ maxp = ep->desc.wMaxPacketSize & 0x7FF;
++ burst = ep->desc.wMaxPacketSize >> 11;
++ mult = 0;
++ }
++ else if (udev->speed == USB_SPEED_SUPER) {
++ maxp = ep->desc.wMaxPacketSize & 0x7FF;
++ burst = ep->ss_ep_comp.bMaxBurst;
++ mult = ep->ss_ep_comp.bmAttributes & 0x3;
++ }
++ interval = (1 << ((in_ep_ctx->ep_info >> 16) & 0xff));
++ sch_ep = kmalloc(sizeof(struct sch_ep), GFP_KERNEL);
++ if (mtk_xhci_scheduler_add_ep(udev->speed, usb_endpoint_dir_in(&ep->desc),
++ isTT, ep_type, maxp, interval, burst, mult, (mtk_u32 *)ep
++ , (mtk_u32 *)in_ep_ctx, sch_ep) != SCH_SUCCESS) {
++ xhci_err(xhci, "[MTK] not enough bandwidth\n");
++
++ return -ENOSPC;
++ }
++#else
++ if (mtk_xhci_scheduler_add_ep(xhci, udev, ep, in_ep_ctx) != SCH_SUCCESS) {
++ xhci_err(xhci, "[MTK] not enough bandwidth\n");
++
++ return -ENOSPC;
++ }
++#endif
++#endif
+ ctrl_ctx->add_flags |= cpu_to_le32(added_ctxs);
+ new_add_flags = le32_to_cpu(ctrl_ctx->add_flags);
+
+@@ -2722,7 +2866,7 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
+ if (ctrl_ctx->add_flags == cpu_to_le32(SLOT_FLAG) &&
+ ctrl_ctx->drop_flags == 0)
+ return 0;
+-
++
+ xhci_dbg(xhci, "New Input Control Context:\n");
+ slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
+ xhci_dbg_ctx(xhci, virt_dev->in_ctx,
+@@ -4349,10 +4493,14 @@ static u16 xhci_call_host_update_timeout_for_endpoint(struct xhci_hcd *xhci,
+ u16 *timeout)
+ {
+ if (state == USB3_LPM_U1) {
++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ if (xhci->quirks & XHCI_INTEL_HOST)
++#endif
+ return xhci_calculate_intel_u1_timeout(udev, desc);
+ } else {
++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ if (xhci->quirks & XHCI_INTEL_HOST)
++#endif
+ return xhci_calculate_intel_u2_timeout(udev, desc);
+ }
+
+@@ -4737,7 +4885,9 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
+ hcd->self.no_sg_constraint = 1;
+
+ /* XHCI controllers don't stop the ep queue on short packets :| */
++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ hcd->self.no_stop_on_short = 1;
++#endif
+
+ if (usb_hcd_is_primary_hcd(hcd)) {
+ xhci = kzalloc(sizeof(struct xhci_hcd), GFP_KERNEL);
+@@ -4800,6 +4950,10 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
+ goto error;
+ xhci_dbg(xhci, "Reset complete\n");
+
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ setInitialReg();
++#endif
++
+ /* Set dma_mask and coherent_dma_mask to 64-bits,
+ * if xHC supports 64-bit addressing */
+ if (HCC_64BIT_ADDR(xhci->hcc_params) &&
+@@ -4824,8 +4978,21 @@ MODULE_DESCRIPTION(DRIVER_DESC);
+ MODULE_AUTHOR(DRIVER_AUTHOR);
+ MODULE_LICENSE("GPL");
+
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++static struct platform_device xhci_platform_dev = {
++ .name = "xhci-hcd",
++ .id = -1,
++ .dev = {
++ .coherent_dma_mask = 0xffffffff,
++ },
++};
++#endif
++
+ static int __init xhci_hcd_init(void)
+ {
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ struct platform_device *pPlatformDev;
++#endif
+ int retval;
+
+ retval = xhci_register_pci();
+@@ -4838,6 +5005,33 @@ static int __init xhci_hcd_init(void)
+ pr_debug("Problem registering platform driver.\n");
+ goto unreg_pci;
+ }
++
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++ retval = register_chrdev(XHCI_MTK_TEST_MAJOR, DEVICE_NAME, &xhci_mtk_test_fops);
++
++ u3phy_init();
++ if (u3phy_ops->u2_slew_rate_calibration) {
++ u3phy_ops->u2_slew_rate_calibration(u3phy);
++ u3phy_ops->u2_slew_rate_calibration(u3phy_p1);
++ }
++ else{
++ printk(KERN_ERR "WARN: PHY doesn't implement u2 slew rate calibration function\n");
++ }
++ u3phy_ops->init(u3phy);
++ reinitIP();
++
++ pPlatformDev = &xhci_platform_dev;
++ memset(pPlatformDev, 0, sizeof(struct platform_device));
++ pPlatformDev->name = "xhci-hcd";
++ pPlatformDev->id = -1;
++ pPlatformDev->dev.coherent_dma_mask = 0xffffffff;
++ pPlatformDev->dev.dma_mask = &pPlatformDev->dev.coherent_dma_mask;
++
++ retval = platform_device_register(&xhci_platform_dev);
++ if (retval < 0)
++ xhci_unregister_plat();
++#endif
++
+ /*
+ * Check the compiler generated sizes of structures that must be laid
+ * out in specific ways for hardware access.
+@@ -4855,6 +5049,7 @@ static int __init xhci_hcd_init(void)
+ BUILD_BUG_ON(sizeof(struct xhci_intr_reg) != 8*32/8);
+ /* xhci_run_regs has eight fields and embeds 128 xhci_intr_regs */
+ BUILD_BUG_ON(sizeof(struct xhci_run_regs) != (8+8*128)*32/8);
++
+ return 0;
+ unreg_pci:
+ xhci_unregister_pci();
+diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
+index 58ed9d0..dda072f 100644
+--- a/drivers/usb/host/xhci.h
++++ b/drivers/usb/host/xhci.h
+@@ -29,9 +29,24 @@
+ #include <linux/usb/hcd.h>
+
+ /* Code sharing between pci-quirks and xhci hcd */
+-#include "xhci-ext-caps.h"
++#include "xhci-ext-caps.h"
+ #include "pci-quirks.h"
+
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++#define XHC_IRQ (22 + 8)
++#define XHC_IO_START 0x1E1C0000
++#define XHC_IO_LENGTH 0x10000
++/* mtk scheduler bitmasks */
++#define BPKTS(p) ((p) & 0x3f)
++#define BCSCOUNT(p) (((p) & 0x7) << 8)
++#define BBM(p) ((p) << 11)
++#define BOFFSET(p) ((p) & 0x3fff)
++#define BREPEAT(p) (((p) & 0x7fff) << 16)
++#endif
++
++
++
++
+ /* xHCI PCI Configuration Registers */
+ #define XHCI_SBRN_OFFSET (0x60)
+
+@@ -1579,8 +1594,12 @@ struct xhci_hcd {
+ /* Compliance Mode Recovery Data */
+ struct timer_list comp_mode_recovery_timer;
+ u32 port_status_u0;
++#ifdef CONFIG_USB_MT7621_XHCI_PLATFORM
++#define COMP_MODE_RCVRY_MSECS 5000
++#else
+ /* Compliance Mode Timer Triggered every 2 seconds */
+ #define COMP_MODE_RCVRY_MSECS 2000
++#endif
+ };
+
+ /* convert between an HCD pointer and the corresponding EHCI_HCD */
+@@ -1728,7 +1747,7 @@ void xhci_urb_free_priv(struct xhci_hcd *xhci, struct urb_priv *urb_priv);
+ void xhci_free_command(struct xhci_hcd *xhci,
+ struct xhci_command *command);
+
+-#ifdef CONFIG_PCI
++#if defined (CONFIG_PCI) && !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ /* xHCI PCI glue */
+ int xhci_register_pci(void);
+ void xhci_unregister_pci(void);
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0041-mtd-fix-cfi-cmdset-0002-erase-status-check.patch b/target/linux/ramips/patches-3.14/0041-mtd-fix-cfi-cmdset-0002-erase-status-check.patch
new file mode 100644
index 0000000000..871e8c1771
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0041-mtd-fix-cfi-cmdset-0002-erase-status-check.patch
@@ -0,0 +1,34 @@
+From f0df443ca7d5d0e4d31aa6769ea12a8cf24d2cd8 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 15 Jul 2013 00:38:51 +0200
+Subject: [PATCH 41/57] mtd: fix cfi cmdset 0002 erase status check
+
+---
+ drivers/mtd/chips/cfi_cmdset_0002.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
+index 89b9d68..8d92fc1 100644
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -1956,7 +1956,7 @@ static int __xipram do_erase_chip(struct map_info *map, struct flchip *chip)
+ chip->erase_suspended = 0;
+ }
+
+- if (chip_ready(map, adr))
++ if (chip_good(map, adr, map_word_ff(map)))
+ break;
+
+ if (time_after(jiffies, timeo)) {
+@@ -2045,7 +2045,7 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip,
+ chip->erase_suspended = 0;
+ }
+
+- if (chip_ready(map, adr)) {
++ if (chip_good(map, adr, map_word_ff(map))) {
+ xip_enable(map, chip, adr);
+ break;
+ }
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0042-mtd-cfi-cmdset-0002-force-word-write.patch b/target/linux/ramips/patches-3.14/0042-mtd-cfi-cmdset-0002-force-word-write.patch
new file mode 100644
index 0000000000..ecee46447a
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0042-mtd-cfi-cmdset-0002-force-word-write.patch
@@ -0,0 +1,75 @@
+From 39010a26a34a56a7928f9217ac23e5138c5ea952 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 15 Jul 2013 00:39:21 +0200
+Subject: [PATCH 42/57] mtd: cfi cmdset 0002 force word write
+
+---
+ drivers/mtd/chips/cfi_cmdset_0002.c | 9 +++++++--
+ 1 file changed, 7 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
+index 8d92fc1..aa06d16 100644
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -41,7 +41,7 @@
+ #include <linux/mtd/xip.h>
+
+ #define AMD_BOOTLOC_BUG
+-#define FORCE_WORD_WRITE 0
++#define FORCE_WORD_WRITE 1
+
+ #define MAX_WORD_RETRIES 3
+
+@@ -52,7 +52,9 @@
+
+ static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+ static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
++#if !FORCE_WORD_WRITE
+ static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
++#endif
+ static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *);
+ static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *);
+ static void cfi_amdstd_sync (struct mtd_info *);
+@@ -192,6 +194,7 @@ static void fixup_amd_bootblock(struct mtd_info *mtd)
+ }
+ #endif
+
++#if !FORCE_WORD_WRITE
+ static void fixup_use_write_buffers(struct mtd_info *mtd)
+ {
+ struct map_info *map = mtd->priv;
+@@ -201,6 +204,7 @@ static void fixup_use_write_buffers(struct mtd_info *mtd)
+ mtd->_write = cfi_amdstd_write_buffers;
+ }
+ }
++#endif /* !FORCE_WORD_WRITE */
+
+ /* Atmel chips don't use the same PRI format as AMD chips */
+ static void fixup_convert_atmel_pri(struct mtd_info *mtd)
+@@ -1461,6 +1465,7 @@ static int cfi_amdstd_write_words(struct mtd_info *mtd, loff_t to, size_t len,
+ /*
+ * FIXME: interleaved mode not tested, and probably not supported!
+ */
++#if !FORCE_WORD_WRITE
+ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
+ unsigned long adr, const u_char *buf,
+ int len)
+@@ -1584,7 +1589,6 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
+ return ret;
+ }
+
+-
+ static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const u_char *buf)
+ {
+@@ -1659,6 +1663,7 @@ static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
+
+ return 0;
+ }
++#endif /* !FORCE_WORD_WRITE */
+
+ /*
+ * Wait for the flash chip to become ready to write data
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0043-mtd-ralink-add-mt7620-nand-driver.patch b/target/linux/ramips/patches-3.14/0043-mtd-ralink-add-mt7620-nand-driver.patch
new file mode 100644
index 0000000000..6619efd400
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0043-mtd-ralink-add-mt7620-nand-driver.patch
@@ -0,0 +1,2421 @@
+From b915fe7cd934160bfaf2cd52f03c118abcae2419 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 17 Nov 2013 17:41:46 +0100
+Subject: [PATCH 43/57] mtd: ralink: add mt7620 nand driver
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/mtd/maps/Kconfig | 4 +
+ drivers/mtd/maps/Makefile | 2 +
+ drivers/mtd/maps/ralink_nand.c | 2136 ++++++++++++++++++++++++++++++++++++++++
+ drivers/mtd/maps/ralink_nand.h | 232 +++++
+ 4 files changed, 2374 insertions(+)
+ create mode 100644 drivers/mtd/maps/ralink_nand.c
+ create mode 100644 drivers/mtd/maps/ralink_nand.h
+
+diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
+index 310dc7c..344f460d 100644
+--- a/drivers/mtd/maps/Kconfig
++++ b/drivers/mtd/maps/Kconfig
+@@ -399,4 +399,8 @@ config MTD_LATCH_ADDR
+
+ If compiled as a module, it will be called latch-addr-flash.
+
++config MTD_NAND_MT7620
++ tristate "Support for NAND on Mediatek MT7620"
++ depends on RALINK && SOC_MT7620
++
+ endmenu
+diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
+index 141c91a..94d2aa0 100644
+--- a/drivers/mtd/maps/Makefile
++++ b/drivers/mtd/maps/Makefile
+@@ -43,3 +43,5 @@ obj-$(CONFIG_MTD_VMU) += vmu-flash.o
+ obj-$(CONFIG_MTD_GPIO_ADDR) += gpio-addr-flash.o
+ obj-$(CONFIG_MTD_LATCH_ADDR) += latch-addr-flash.o
+ obj-$(CONFIG_MTD_LANTIQ) += lantiq-flash.o
++obj-$(CONFIG_MTD_NAND_MT7620) += ralink_nand.o
++
+diff --git a/drivers/mtd/maps/ralink_nand.c b/drivers/mtd/maps/ralink_nand.c
+new file mode 100644
+index 0000000..64f9119
+--- /dev/null
++++ b/drivers/mtd/maps/ralink_nand.c
+@@ -0,0 +1,2136 @@
++#define DEBUG
++#include <linux/device.h>
++#undef DEBUG
++#include <linux/slab.h>
++#include <linux/mtd/mtd.h>
++#include <linux/delay.h>
++#include <linux/module.h>
++#include <linux/interrupt.h>
++#include <linux/dma-mapping.h>
++#include <linux/mtd/partitions.h>
++#include <asm/io.h>
++#include <linux/delay.h>
++#include <linux/sched.h>
++#include <linux/of.h>
++#include <linux/platform_device.h>
++
++#include "ralink_nand.h"
++#ifdef RANDOM_GEN_BAD_BLOCK
++#include <linux/random.h>
++#endif
++
++#define LARGE_MTD_BOOT_PART_SIZE (CFG_BLOCKSIZE<<2)
++#define LARGE_MTD_CONFIG_PART_SIZE (CFG_BLOCKSIZE<<2)
++#define LARGE_MTD_FACTORY_PART_SIZE (CFG_BLOCKSIZE<<1)
++
++
++#define BLOCK_ALIGNED(a) ((a) & (CFG_BLOCKSIZE - 1))
++
++#define READ_STATUS_RETRY 1000
++
++struct mtd_info *ranfc_mtd = NULL;
++
++int skipbbt = 0;
++int ranfc_debug = 1;
++static int ranfc_bbt = 1;
++#if defined (WORKAROUND_RX_BUF_OV)
++static int ranfc_verify = 1;
++#endif
++static u32 nand_addrlen;
++
++#if 0
++module_param(ranfc_debug, int, 0644);
++module_param(ranfc_bbt, int, 0644);
++module_param(ranfc_verify, int, 0644);
++#endif
++
++#if 0
++#define ra_dbg(args...) do { if (ranfc_debug) printk(args); } while(0)
++#else
++#define ra_dbg(args...)
++#endif
++
++#define CLEAR_INT_STATUS() ra_outl(NFC_INT_ST, ra_inl(NFC_INT_ST))
++#define NFC_TRANS_DONE() (ra_inl(NFC_INT_ST) & INT_ST_ND_DONE)
++
++int is_nand_page_2048 = 0;
++const unsigned int nand_size_map[2][3] = {{25, 30, 30}, {20, 27, 30}};
++
++static int nfc_wait_ready(int snooze_ms);
++
++static const char * const mtk_probe_types[] = { "cmdlinepart", "ofpart", NULL };
++
++/**
++ * reset nand chip
++ */
++static int nfc_chip_reset(void)
++{
++ int status;
++
++ //ra_dbg("%s:\n", __func__);
++
++ // reset nand flash
++ ra_outl(NFC_CMD1, 0x0);
++ ra_outl(NFC_CMD2, 0xff);
++ ra_outl(NFC_ADDR, 0x0);
++ ra_outl(NFC_CONF, 0x0411);
++
++ status = nfc_wait_ready(5); //erase wait 5us
++ if (status & NAND_STATUS_FAIL) {
++ printk("%s: fail \n", __func__);
++ }
++
++ return (int)(status & NAND_STATUS_FAIL);
++
++}
++
++
++
++/**
++ * clear NFC and flash chip.
++ */
++static int nfc_all_reset(void)
++{
++ int retry;
++
++ ra_dbg("%s: \n", __func__);
++
++ // reset controller
++ ra_outl(NFC_CTRL, ra_inl(NFC_CTRL) | 0x02); //clear data buffer
++ ra_outl(NFC_CTRL, ra_inl(NFC_CTRL) & ~0x02); //clear data buffer
++
++ CLEAR_INT_STATUS();
++
++ retry = READ_STATUS_RETRY;
++ while ((ra_inl(NFC_INT_ST) & 0x02) != 0x02 && retry--);
++ if (retry <= 0) {
++ printk("nfc_all_reset: clean buffer fail \n");
++ return -1;
++ }
++
++ retry = READ_STATUS_RETRY;
++ while ((ra_inl(NFC_STATUS) & 0x1) != 0x0 && retry--) { //fixme, controller is busy ?
++ udelay(1);
++ }
++
++ nfc_chip_reset();
++
++ return 0;
++}
++
++/** NOTICE: only called by nfc_wait_ready().
++ * @return -1, nfc can not get transction done
++ * @return 0, ok.
++ */
++static int _nfc_read_status(char *status)
++{
++ unsigned long cmd1, conf;
++ int int_st, nfc_st;
++ int retry;
++
++ cmd1 = 0x70;
++ conf = 0x000101 | (1 << 20);
++
++ //fixme, should we check nfc status?
++ CLEAR_INT_STATUS();
++
++ ra_outl(NFC_CMD1, cmd1);
++ ra_outl(NFC_CONF, conf);
++
++ /* FIXME,
++ * 1. since we have no wired ready signal, directly
++ * calling this function is not gurantee to read right status under ready state.
++ * 2. the other side, we can not determine how long to become ready, this timeout retry is nonsense.
++ * 3. SUGGESTION: call nfc_read_status() from nfc_wait_ready(),
++ * that is aware about caller (in sementics) and has snooze plused nfc ND_DONE.
++ */
++ retry = READ_STATUS_RETRY;
++ do {
++ nfc_st = ra_inl(NFC_STATUS);
++ int_st = ra_inl(NFC_INT_ST);
++
++ ndelay(10);
++ } while (!(int_st & INT_ST_RX_BUF_RDY) && retry--);
++
++ if (!(int_st & INT_ST_RX_BUF_RDY)) {
++ printk("nfc_read_status: NFC fail, int_st(%x), retry:%x. nfc:%x, reset nfc and flash. \n",
++ int_st, retry, nfc_st);
++ nfc_all_reset();
++ *status = NAND_STATUS_FAIL;
++ return -1;
++ }
++
++ *status = (char)(le32_to_cpu(ra_inl(NFC_DATA)) & 0x0ff);
++ return 0;
++}
++
++/**
++ * @return !0, chip protect.
++ * @return 0, chip not protected.
++ */
++static int nfc_check_wp(void)
++{
++ /* Check the WP bit */
++#if !defined CONFIG_NOT_SUPPORT_WP
++ return !!(ra_inl(NFC_CTRL) & 0x01);
++#else
++ char result = 0;
++ int ret;
++
++ ret = _nfc_read_status(&result);
++ //FIXME, if ret < 0
++
++ return !(result & NAND_STATUS_WP);
++#endif
++}
++
++#if !defined CONFIG_NOT_SUPPORT_RB
++/*
++ * @return !0, chip ready.
++ * @return 0, chip busy.
++ */
++static int nfc_device_ready(void)
++{
++ /* Check the ready */
++ return !!(ra_inl(NFC_STATUS) & 0x04);
++}
++#endif
++
++
++/**
++ * generic function to get data from flash.
++ * @return data length reading from flash.
++ */
++static int _ra_nand_pull_data(char *buf, int len, int use_gdma)
++{
++#ifdef RW_DATA_BY_BYTE
++ char *p = buf;
++#else
++ __u32 *p = (__u32 *)buf;
++#endif
++ int retry, int_st;
++ unsigned int ret_data;
++ int ret_size;
++
++ // receive data by use_gdma
++ if (use_gdma) {
++ //if (_ra_nand_dma_pull((unsigned long)p, len)) {
++ if (1) {
++ printk("%s: fail \n", __func__);
++ len = -1; //return error
++ }
++
++ return len;
++ }
++
++ //fixme: retry count size?
++ retry = READ_STATUS_RETRY;
++ // no gdma
++ while (len > 0) {
++ int_st = ra_inl(NFC_INT_ST);
++ if (int_st & INT_ST_RX_BUF_RDY) {
++
++ ret_data = ra_inl(NFC_DATA);
++ ra_outl(NFC_INT_ST, INT_ST_RX_BUF_RDY);
++#ifdef RW_DATA_BY_BYTE
++ ret_size = sizeof(unsigned int);
++ ret_size = min(ret_size, len);
++ len -= ret_size;
++ while (ret_size-- > 0) {
++ //nfc is little endian
++ *p++ = ret_data & 0x0ff;
++ ret_data >>= 8;
++ }
++#else
++ ret_size = min(len, 4);
++ len -= ret_size;
++ if (ret_size == 4)
++ *p++ = ret_data;
++ else {
++ __u8 *q = (__u8 *)p;
++ while (ret_size-- > 0) {
++ *q++ = ret_data & 0x0ff;
++ ret_data >>= 8;
++ }
++ p = (__u32 *)q;
++ }
++#endif
++ retry = READ_STATUS_RETRY;
++ }
++ else if (int_st & INT_ST_ND_DONE) {
++ break;
++ }
++ else {
++ udelay(1);
++ if (retry-- < 0)
++ break;
++ }
++ }
++
++#ifdef RW_DATA_BY_BYTE
++ return (int)(p - buf);
++#else
++ return ((int)p - (int)buf);
++#endif
++}
++
++/**
++ * generic function to put data into flash.
++ * @return data length writing into flash.
++ */
++static int _ra_nand_push_data(char *buf, int len, int use_gdma)
++{
++#ifdef RW_DATA_BY_BYTE
++ char *p = buf;
++#else
++ __u32 *p = (__u32 *)buf;
++#endif
++ int retry, int_st;
++ unsigned int tx_data = 0;
++ int tx_size, iter = 0;
++
++ // receive data by use_gdma
++ if (use_gdma) {
++ //if (_ra_nand_dma_push((unsigned long)p, len))
++ if (1)
++ len = 0;
++ printk("%s: fail \n", __func__);
++ return len;
++ }
++
++ // no gdma
++ retry = READ_STATUS_RETRY;
++ while (len > 0) {
++ int_st = ra_inl(NFC_INT_ST);
++ if (int_st & INT_ST_TX_BUF_RDY) {
++#ifdef RW_DATA_BY_BYTE
++ tx_size = min(len, (int)sizeof(unsigned long));
++ for (iter = 0; iter < tx_size; iter++) {
++ tx_data |= (*p++ << (8*iter));
++ }
++#else
++ tx_size = min(len, 4);
++ if (tx_size == 4)
++ tx_data = (*p++);
++ else {
++ __u8 *q = (__u8 *)p;
++ for (iter = 0; iter < tx_size; iter++)
++ tx_data |= (*q++ << (8*iter));
++ p = (__u32 *)q;
++ }
++#endif
++ ra_outl(NFC_INT_ST, INT_ST_TX_BUF_RDY);
++ ra_outl(NFC_DATA, tx_data);
++ len -= tx_size;
++ retry = READ_STATUS_RETRY;
++ }
++ else if (int_st & INT_ST_ND_DONE) {
++ break;
++ }
++ else {
++ udelay(1);
++ if (retry-- < 0) {
++ ra_dbg("%s p:%p buf:%p \n", __func__, p, buf);
++ break;
++ }
++ }
++ }
++
++
++#ifdef RW_DATA_BY_BYTE
++ return (int)(p - buf);
++#else
++ return ((int)p - (int)buf);
++#endif
++
++}
++
++static int nfc_select_chip(struct ra_nand_chip *ra, int chipnr)
++{
++#if (CONFIG_NUMCHIPS == 1)
++ if (!(chipnr < CONFIG_NUMCHIPS))
++ return -1;
++ return 0;
++#else
++ BUG();
++#endif
++}
++
++/** @return -1: chip_select fail
++ * 0 : both CE and WP==0 are OK
++ * 1 : CE OK and WP==1
++ */
++static int nfc_enable_chip(struct ra_nand_chip *ra, unsigned int offs, int read_only)
++{
++ int chipnr = offs >> ra->chip_shift;
++
++ ra_dbg("%s: offs:%x read_only:%x \n", __func__, offs, read_only);
++
++ chipnr = nfc_select_chip(ra, chipnr);
++ if (chipnr < 0) {
++ printk("%s: chip select error, offs(%x)\n", __func__, offs);
++ return -1;
++ }
++
++ if (!read_only)
++ return nfc_check_wp();
++
++ return 0;
++}
++
++/** wait nand chip becomeing ready and return queried status.
++ * @param snooze: sleep time in ms unit before polling device ready.
++ * @return status of nand chip
++ * @return NAN_STATUS_FAIL if something unexpected.
++ */
++static int nfc_wait_ready(int snooze_ms)
++{
++ int retry;
++ char status;
++
++ // wait nfc idle,
++ if (snooze_ms == 0)
++ snooze_ms = 1;
++ else
++ schedule_timeout(snooze_ms * HZ / 1000);
++
++ snooze_ms = retry = snooze_ms *1000000 / 100 ; // ndelay(100)
++
++ while (!NFC_TRANS_DONE() && retry--) {
++ if (!cond_resched())
++ ndelay(100);
++ }
++
++ if (!NFC_TRANS_DONE()) {
++ printk("nfc_wait_ready: no transaction done \n");
++ return NAND_STATUS_FAIL;
++ }
++
++#if !defined (CONFIG_NOT_SUPPORT_RB)
++ //fixme
++ while(!(status = nfc_device_ready()) && retry--) {
++ ndelay(100);
++ }
++
++ if (status == 0) {
++ printk("nfc_wait_ready: no device ready. \n");
++ return NAND_STATUS_FAIL;
++ }
++
++ _nfc_read_status(&status);
++ return status;
++#else
++
++ while(retry--) {
++ _nfc_read_status(&status);
++ if (status & NAND_STATUS_READY)
++ break;
++ ndelay(100);
++ }
++ if (retry<0)
++ printk("nfc_wait_ready 2: no device ready, status(%x). \n", status);
++
++ return status;
++#endif
++}
++
++/**
++ * return 0: erase OK
++ * return -EIO: fail
++ */
++int nfc_erase_block(struct ra_nand_chip *ra, int row_addr)
++{
++ unsigned long cmd1, cmd2, bus_addr, conf;
++ char status;
++
++ cmd1 = 0x60;
++ cmd2 = 0xd0;
++ bus_addr = row_addr;
++ conf = 0x00511 | ((CFG_ROW_ADDR_CYCLE)<<16);
++
++ // set NFC
++ ra_dbg("%s: cmd1: %lx, cmd2:%lx bus_addr: %lx, conf: %lx \n",
++ __func__, cmd1, cmd2, bus_addr, conf);
++
++ //fixme, should we check nfc status?
++ CLEAR_INT_STATUS();
++
++ ra_outl(NFC_CMD1, cmd1);
++ ra_outl(NFC_CMD2, cmd2);
++ ra_outl(NFC_ADDR, bus_addr);
++ ra_outl(NFC_CONF, conf);
++
++ status = nfc_wait_ready(3); //erase wait 3ms
++ if (status & NAND_STATUS_FAIL) {
++ printk("%s: fail \n", __func__);
++ return -EIO;
++ }
++
++ return 0;
++
++}
++
++static inline int _nfc_read_raw_data(int cmd1, int cmd2, int bus_addr, int bus_addr2, int conf, char *buf, int len, int flags)
++{
++ int ret;
++
++ CLEAR_INT_STATUS();
++ ra_outl(NFC_CMD1, cmd1);
++ ra_outl(NFC_CMD2, cmd2);
++ ra_outl(NFC_ADDR, bus_addr);
++#if defined (CONFIG_RALINK_RT6855) || defined (CONFIG_RALINK_RT6855A) || \
++ defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621)
++ ra_outl(NFC_ADDR2, bus_addr2);
++#endif
++ ra_outl(NFC_CONF, conf);
++
++ ret = _ra_nand_pull_data(buf, len, 0);
++ if (ret != len) {
++ ra_dbg("%s: ret:%x (%x) \n", __func__, ret, len);
++ return NAND_STATUS_FAIL;
++ }
++
++ //FIXME, this section is not necessary
++ ret = nfc_wait_ready(0); //wait ready
++ /* to prevent the DATA FIFO 's old data from next operation */
++ ra_outl(NFC_CTRL, ra_inl(NFC_CTRL) | 0x02); //clear data buffer
++ ra_outl(NFC_CTRL, ra_inl(NFC_CTRL) & ~0x02); //clear data buffer
++
++ if (ret & NAND_STATUS_FAIL) {
++ printk("%s: fail \n", __func__);
++ return NAND_STATUS_FAIL;
++ }
++
++ return 0;
++}
++
++static inline int _nfc_write_raw_data(int cmd1, int cmd3, int bus_addr, int bus_addr2, int conf, char *buf, int len, int flags)
++{
++ int ret;
++
++ CLEAR_INT_STATUS();
++ ra_outl(NFC_CMD1, cmd1);
++ ra_outl(NFC_CMD3, cmd3);
++ ra_outl(NFC_ADDR, bus_addr);
++#if defined (CONFIG_RALINK_RT6855) || defined (CONFIG_RALINK_RT6855A) || \
++ defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621)
++ ra_outl(NFC_ADDR2, bus_addr2);
++#endif
++ ra_outl(NFC_CONF, conf);
++
++ ret = _ra_nand_push_data(buf, len, 0);
++ if (ret != len) {
++ ra_dbg("%s: ret:%x (%x) \n", __func__, ret, len);
++ return NAND_STATUS_FAIL;
++ }
++
++ ret = nfc_wait_ready(1); //write wait 1ms
++ /* to prevent the DATA FIFO 's old data from next operation */
++ ra_outl(NFC_CTRL, ra_inl(NFC_CTRL) | 0x02); //clear data buffer
++ ra_outl(NFC_CTRL, ra_inl(NFC_CTRL) & ~0x02); //clear data buffer
++
++ if (ret & NAND_STATUS_FAIL) {
++ printk("%s: fail \n", __func__);
++ return NAND_STATUS_FAIL;
++ }
++
++ return 0;
++}
++
++/**
++ * @return !0: fail
++ * @return 0: OK
++ */
++int nfc_read_oob(struct ra_nand_chip *ra, int page, unsigned int offs, char *buf, int len, int flags)
++{
++ unsigned int cmd1 = 0, cmd2 = 0, conf = 0;
++ unsigned int bus_addr = 0, bus_addr2 = 0;
++ unsigned int ecc_en;
++ int use_gdma;
++ int status;
++
++ int pages_perblock = 1<<(ra->erase_shift - ra->page_shift);
++ // constrain of nfc read function
++
++#if defined (WORKAROUND_RX_BUF_OV)
++ BUG_ON (len > 60); //problem of rx-buffer overrun
++#endif
++ BUG_ON (offs >> ra->oob_shift); //page boundry
++ BUG_ON ((unsigned int)(((offs + len) >> ra->oob_shift) + page) >
++ ((page + pages_perblock) & ~(pages_perblock-1))); //block boundry
++
++ use_gdma = flags & FLAG_USE_GDMA;
++ ecc_en = flags & FLAG_ECC_EN;
++ bus_addr = (page << (CFG_COLUMN_ADDR_CYCLE*8)) | (offs & ((1<<CFG_COLUMN_ADDR_CYCLE*8) - 1));
++
++ if (is_nand_page_2048) {
++ bus_addr += CFG_PAGESIZE;
++ bus_addr2 = page >> (CFG_COLUMN_ADDR_CYCLE*8);
++ cmd1 = 0x0;
++ cmd2 = 0x30;
++ conf = 0x000511| ((CFG_ADDR_CYCLE)<<16) | (len << 20);
++ }
++ else {
++ cmd1 = 0x50;
++ conf = 0x000141| ((CFG_ADDR_CYCLE)<<16) | (len << 20);
++ }
++ if (ecc_en)
++ conf |= (1<<3);
++ if (use_gdma)
++ conf |= (1<<2);
++
++ ra_dbg("%s: cmd1:%x, bus_addr:%x, conf:%x, len:%x, flag:%x\n",
++ __func__, cmd1, bus_addr, conf, len, flags);
++
++ status = _nfc_read_raw_data(cmd1, cmd2, bus_addr, bus_addr2, conf, buf, len, flags);
++ if (status & NAND_STATUS_FAIL) {
++ printk("%s: fail\n", __func__);
++ return -EIO;
++ }
++
++ return 0;
++}
++
++/**
++ * @return !0: fail
++ * @return 0: OK
++ */
++int nfc_write_oob(struct ra_nand_chip *ra, int page, unsigned int offs, char *buf, int len, int flags)
++{
++ unsigned int cmd1 = 0, cmd3=0, conf = 0;
++ unsigned int bus_addr = 0, bus_addr2 = 0;
++ int use_gdma;
++ int status;
++
++ int pages_perblock = 1<<(ra->erase_shift - ra->page_shift);
++ // constrain of nfc read function
++
++ BUG_ON (offs >> ra->oob_shift); //page boundry
++ BUG_ON ((unsigned int)(((offs + len) >> ra->oob_shift) + page) >
++ ((page + pages_perblock) & ~(pages_perblock-1))); //block boundry
++
++ use_gdma = flags & FLAG_USE_GDMA;
++ bus_addr = (page << (CFG_COLUMN_ADDR_CYCLE*8)) | (offs & ((1<<CFG_COLUMN_ADDR_CYCLE*8) - 1));
++
++ if (is_nand_page_2048) {
++ cmd1 = 0x80;
++ cmd3 = 0x10;
++ bus_addr += CFG_PAGESIZE;
++ bus_addr2 = page >> (CFG_COLUMN_ADDR_CYCLE*8);
++ conf = 0x001123 | ((CFG_ADDR_CYCLE)<<16) | ((len) << 20);
++ }
++ else {
++ cmd1 = 0x08050;
++ cmd3 = 0x10;
++ conf = 0x001223 | ((CFG_ADDR_CYCLE)<<16) | ((len) << 20);
++ }
++ if (use_gdma)
++ conf |= (1<<2);
++
++ // set NFC
++ ra_dbg("%s: cmd1: %x, cmd3: %x bus_addr: %x, conf: %x, len:%x\n",
++ __func__, cmd1, cmd3, bus_addr, conf, len);
++
++ status = _nfc_write_raw_data(cmd1, cmd3, bus_addr, bus_addr2, conf, buf, len, flags);
++ if (status & NAND_STATUS_FAIL) {
++ printk("%s: fail \n", __func__);
++ return -EIO;
++ }
++
++ return 0;
++}
++
++
++int nfc_read_page(struct ra_nand_chip *ra, char *buf, int page, int flags);
++int nfc_write_page(struct ra_nand_chip *ra, char *buf, int page, int flags);
++
++
++#if !defined (WORKAROUND_RX_BUF_OV)
++static int one_bit_correction(char *ecc, char *expected, int *bytes, int *bits);
++int nfc_ecc_verify(struct ra_nand_chip *ra, char *buf, int page, int mode)
++{
++ int ret, i;
++ char *p, *e;
++ int ecc;
++
++ //ra_dbg("%s, page:%x mode:%d\n", __func__, page, mode);
++
++ if (mode == FL_WRITING) {
++ int len = CFG_PAGESIZE + CFG_PAGE_OOBSIZE;
++ int conf = 0x000141| ((CFG_ADDR_CYCLE)<<16) | (len << 20);
++ conf |= (1<<3); //(ecc_en)
++ //conf |= (1<<2); // (use_gdma)
++
++ p = ra->readback_buffers;
++ ret = nfc_read_page(ra, ra->readback_buffers, page, FLAG_ECC_EN);
++ if (ret == 0)
++ goto ecc_check;
++
++ //FIXME, double comfirm
++ printk("%s: read back fail, try again \n",__func__);
++ ret = nfc_read_page(ra, ra->readback_buffers, page, FLAG_ECC_EN);
++ if (ret != 0) {
++ printk("\t%s: read back fail agian \n",__func__);
++ goto bad_block;
++ }
++ }
++ else if (mode == FL_READING) {
++ p = buf;
++ }
++ else
++ return -2;
++
++ecc_check:
++ p += CFG_PAGESIZE;
++ if (!is_nand_page_2048) {
++ ecc = ra_inl(NFC_ECC);
++ if (ecc == 0) //clean page.
++ return 0;
++ e = (char*)&ecc;
++ for (i=0; i<CONFIG_ECC_BYTES; i++) {
++ int eccpos = CONFIG_ECC_OFFSET + i;
++ if (*(p + eccpos) != (char)0xff)
++ break;
++ if (i == CONFIG_ECC_BYTES - 1) {
++ printk("skip ecc 0xff at page %x\n", page);
++ return 0;
++ }
++ }
++ for (i=0; i<CONFIG_ECC_BYTES; i++) {
++ int eccpos = CONFIG_ECC_OFFSET + i;
++ if (*(p + eccpos) != *(e + i)) {
++ printk("%s mode:%s, invalid ecc, page: %x read:%x %x %x, ecc:%x \n",
++ __func__, (mode == FL_READING)?"read":"write", page,
++ *(p+ CONFIG_ECC_OFFSET), *(p+ CONFIG_ECC_OFFSET+1), *(p+ CONFIG_ECC_OFFSET +2), ecc);
++ return -1;
++ }
++ }
++ }
++#if defined (CONFIG_RALINK_RT6855) || defined (CONFIG_RALINK_RT6855A) || \
++ defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621)
++ else {
++ int ecc2, ecc3, ecc4, qsz;
++ char *e2, *e3, *e4;
++ int correction_flag = 0;
++ ecc = ra_inl(NFC_ECC_P1);
++ ecc2 = ra_inl(NFC_ECC_P2);
++ ecc3 = ra_inl(NFC_ECC_P3);
++ ecc4 = ra_inl(NFC_ECC_P4);
++ e = (char*)&ecc;
++ e2 = (char*)&ecc2;
++ e3 = (char*)&ecc3;
++ e4 = (char*)&ecc4;
++ qsz = CFG_PAGE_OOBSIZE / 4;
++ if (ecc == 0 && ecc2 == 0 && ecc3 == 0 && ecc4 == 0)
++ return 0;
++ for (i=0; i<CONFIG_ECC_BYTES; i++) {
++ int eccpos = CONFIG_ECC_OFFSET + i;
++ if (*(p + eccpos) != (char)0xff)
++ break;
++ else if (*(p + eccpos + qsz) != (char)0xff)
++ break;
++ else if (*(p + eccpos + qsz*2) != (char)0xff)
++ break;
++ else if (*(p + eccpos + qsz*3) != (char)0xff)
++ break;
++ if (i == CONFIG_ECC_BYTES - 1) {
++ printk("skip ecc 0xff at page %x\n", page);
++ return 0;
++ }
++ }
++ for (i=0; i<CONFIG_ECC_BYTES; i++) {
++ int eccpos = CONFIG_ECC_OFFSET + i;
++ if (*(p + eccpos) != *(e + i)) {
++ printk("%s mode:%s, invalid ecc, page: %x read:%x %x %x, ecc:%x \n",
++ __func__, (mode == FL_READING)?"read":"write", page,
++ *(p+ CONFIG_ECC_OFFSET), *(p+ CONFIG_ECC_OFFSET+1), *(p+ CONFIG_ECC_OFFSET +2), ecc);
++ correction_flag |= 0x1;
++ }
++ if (*(p + eccpos + qsz) != *(e2 + i)) {
++ printk("%s mode:%s, invalid ecc2, page: %x read:%x %x %x, ecc2:%x \n",
++ __func__, (mode == FL_READING)?"read":"write", page,
++ *(p+CONFIG_ECC_OFFSET+qsz), *(p+ CONFIG_ECC_OFFSET+1+qsz), *(p+ CONFIG_ECC_OFFSET+2+qsz), ecc2);
++ correction_flag |= 0x2;
++ }
++ if (*(p + eccpos + qsz*2) != *(e3 + i)) {
++ printk("%s mode:%s, invalid ecc3, page: %x read:%x %x %x, ecc3:%x \n",
++ __func__, (mode == FL_READING)?"read":"write", page,
++ *(p+CONFIG_ECC_OFFSET+qsz*2), *(p+ CONFIG_ECC_OFFSET+1+qsz*2), *(p+ CONFIG_ECC_OFFSET+2+qsz*2), ecc3);
++ correction_flag |= 0x4;
++ }
++ if (*(p + eccpos + qsz*3) != *(e4 + i)) {
++ printk("%s mode:%s, invalid ecc4, page: %x read:%x %x %x, ecc4:%x \n",
++ __func__, (mode == FL_READING)?"read":"write", page,
++ *(p+CONFIG_ECC_OFFSET+qsz*3), *(p+ CONFIG_ECC_OFFSET+1+qsz*3), *(p+ CONFIG_ECC_OFFSET+2+qsz*3), ecc4);
++ correction_flag |= 0x8;
++ }
++ }
++
++ if (correction_flag)
++ {
++ printk("trying to do correction!\n");
++ if (correction_flag & 0x1)
++ {
++ int bytes, bits;
++ char *pBuf = p - CFG_PAGESIZE;
++
++ if (one_bit_correction(p + CONFIG_ECC_OFFSET, e, &bytes, &bits) == 0)
++ {
++ pBuf[bytes] = pBuf[bytes] ^ (1 << bits);
++ printk("1. correct byte %d, bit %d!\n", bytes, bits);
++ }
++ else
++ {
++ printk("failed to correct!\n");
++ return -1;
++ }
++ }
++
++ if (correction_flag & 0x2)
++ {
++ int bytes, bits;
++ char *pBuf = (p - CFG_PAGESIZE) + CFG_PAGESIZE/4;
++
++ if (one_bit_correction((p + CONFIG_ECC_OFFSET + qsz), e2, &bytes, &bits) == 0)
++ {
++ pBuf[bytes] = pBuf[bytes] ^ (1 << bits);
++ printk("2. correct byte %d, bit %d!\n", bytes, bits);
++ }
++ else
++ {
++ printk("failed to correct!\n");
++ return -1;
++ }
++ }
++ if (correction_flag & 0x4)
++ {
++ int bytes, bits;
++ char *pBuf = (p - CFG_PAGESIZE) + CFG_PAGESIZE/2;
++
++ if (one_bit_correction((p + CONFIG_ECC_OFFSET + qsz * 2), e3, &bytes, &bits) == 0)
++ {
++ pBuf[bytes] = pBuf[bytes] ^ (1 << bits);
++ printk("3. correct byte %d, bit %d!\n", bytes, bits);
++ }
++ else
++ {
++ printk("failed to correct!\n");
++ return -1;
++ }
++ }
++ if (correction_flag & 0x8)
++ {
++ int bytes, bits;
++ char *pBuf = (p - CFG_PAGESIZE) + CFG_PAGESIZE*3/4;
++
++ if (one_bit_correction((p + CONFIG_ECC_OFFSET + qsz * 3), e4, &bytes, &bits) == 0)
++ {
++ pBuf[bytes] = pBuf[bytes] ^ (1 << bits);
++ printk("4. correct byte %d, bit %d!\n", bytes, bits);
++ }
++ else
++ {
++ printk("failed to correct!\n");
++ return -1;
++ }
++ }
++ }
++
++ }
++#endif
++ return 0;
++
++bad_block:
++ return -1;
++}
++
++#else
++
++void ranfc_dump(void)
++{
++ int i;
++ for (i=0; i<11; i++) {
++ if (i==6)
++ continue;
++ printk("%x: %x \n", NFC_BASE + i*4, ra_inl(NFC_BASE + i*4));
++ }
++}
++
++/**
++ * @return 0, ecc OK or corrected.
++ * @return NAND_STATUS_FAIL, ecc fail.
++ */
++
++int nfc_ecc_verify(struct ra_nand_chip *ra, char *buf, int page, int mode)
++{
++ int ret, i;
++ char *p, *e;
++ int ecc;
++
++ if (ranfc_verify == 0)
++ return 0;
++
++ ra_dbg("%s, page:%x mode:%d\n", __func__, page, mode);
++
++ if (mode == FL_WRITING) { // read back and memcmp
++ ret = nfc_read_page(ra, ra->readback_buffers, page, FLAG_NONE);
++ if (ret != 0) //double comfirm
++ ret = nfc_read_page(ra, ra->readback_buffers, page, FLAG_NONE);
++
++ if (ret != 0) {
++ printk("%s: mode:%x read back fail \n", __func__, mode);
++ return -1;
++ }
++ return memcmp(buf, ra->readback_buffers, 1<<ra->page_shift);
++ }
++
++ if (mode == FL_READING) {
++#if 0
++ if (ra->sandbox_page == 0)
++ return 0;
++
++ ret = nfc_write_page(ra, buf, ra->sandbox_page, FLAG_USE_GDMA | FLAG_ECC_EN);
++ if (ret != 0) {
++ printk("%s, fail write sandbox_page \n", __func__);
++ return -1;
++ }
++#else
++ /** @note:
++ * The following command is actually not 'write' command to drive NFC to write flash.
++ * However, it can make NFC to calculate ECC, that will be used to compare with original ones.
++ * --YT
++ */
++ unsigned int conf = 0x001223| (CFG_ADDR_CYCLE<<16) | (0x200 << 20) | (1<<3) | (1<<2);
++ _nfc_write_raw_data(0xff, 0xff, ra->sandbox_page<<ra->page_shift, conf, buf, 0x200, FLAG_USE_GDMA);
++#endif
++
++ ecc = ra_inl(NFC_ECC);
++ if (ecc == 0) //clean page.
++ return 0;
++ e = (char*)&ecc;
++ p = buf + (1<<ra->page_shift);
++ for (i=0; i<CONFIG_ECC_BYTES; i++) {
++ int eccpos = CONFIG_ECC_OFFSET + i;
++ if (*(p + eccpos) != *(e + i)) {
++ printk("%s mode:%s, invalid ecc, page: %x read:%x %x %x, write:%x \n",
++ __func__, (mode == FL_READING)?"read":"write", page,
++ *(p+ CONFIG_ECC_OFFSET), *(p+ CONFIG_ECC_OFFSET+1), *(p+ CONFIG_ECC_OFFSET +2), ecc);
++
++ for (i=0; i<528; i++)
++ printk("%-2x \n", *(buf + i));
++ return -1;
++ }
++ }
++ return 0;
++ }
++
++ return -1;
++
++}
++
++#endif
++
++
++/**
++ * @return -EIO, writing size is less than a page
++ * @return 0, OK
++ */
++int nfc_read_page(struct ra_nand_chip *ra, char *buf, int page, int flags)
++{
++ unsigned int cmd1 = 0, cmd2 = 0, conf = 0;
++ unsigned int bus_addr = 0, bus_addr2 = 0;
++ unsigned int ecc_en;
++ int use_gdma;
++ int size, offs;
++ int status = 0;
++
++ use_gdma = flags & FLAG_USE_GDMA;
++ ecc_en = flags & FLAG_ECC_EN;
++
++ page = page & (CFG_CHIPSIZE - 1); // chip boundary
++ size = CFG_PAGESIZE + CFG_PAGE_OOBSIZE; //add oobsize
++ offs = 0;
++
++ while (size > 0) {
++ int len;
++#if defined (WORKAROUND_RX_BUF_OV)
++ len = min(60, size);
++#else
++ len = size;
++#endif
++ bus_addr = (page << (CFG_COLUMN_ADDR_CYCLE*8)) | (offs & ((1<<CFG_COLUMN_ADDR_CYCLE*8)-1));
++ if (is_nand_page_2048) {
++ bus_addr2 = page >> (CFG_COLUMN_ADDR_CYCLE*8);
++ cmd1 = 0x0;
++ cmd2 = 0x30;
++ conf = 0x000511| ((CFG_ADDR_CYCLE)<<16) | (len << 20);
++ }
++ else {
++ if (offs & ~(CFG_PAGESIZE-1))
++ cmd1 = 0x50;
++ else if (offs & ~((1<<CFG_COLUMN_ADDR_CYCLE*8)-1))
++ cmd1 = 0x01;
++ else
++ cmd1 = 0;
++
++ conf = 0x000141| ((CFG_ADDR_CYCLE)<<16) | (len << 20);
++ }
++#if !defined (WORKAROUND_RX_BUF_OV)
++ if (ecc_en)
++ conf |= (1<<3);
++#endif
++ if (use_gdma)
++ conf |= (1<<2);
++
++ status = _nfc_read_raw_data(cmd1, cmd2, bus_addr, bus_addr2, conf, buf+offs, len, flags);
++ if (status & NAND_STATUS_FAIL) {
++ printk("%s: fail \n", __func__);
++ return -EIO;
++ }
++
++ offs += len;
++ size -= len;
++ }
++
++ // verify and correct ecc
++ if ((flags & (FLAG_VERIFY | FLAG_ECC_EN)) == (FLAG_VERIFY | FLAG_ECC_EN)) {
++ status = nfc_ecc_verify(ra, buf, page, FL_READING);
++ if (status != 0) {
++ printk("%s: fail, buf:%x, page:%x, flag:%x\n",
++ __func__, (unsigned int)buf, page, flags);
++ return -EBADMSG;
++ }
++ }
++ else {
++ // fix,e not yet support
++ ra->buffers_page = -1; //cached
++ }
++
++ return 0;
++}
++
++
++/**
++ * @return -EIO, fail to write
++ * @return 0, OK
++ */
++int nfc_write_page(struct ra_nand_chip *ra, char *buf, int page, int flags)
++{
++ unsigned int cmd1 = 0, cmd3, conf = 0;
++ unsigned int bus_addr = 0, bus_addr2 = 0;
++ unsigned int ecc_en;
++ int use_gdma;
++ int size;
++ char status;
++ uint8_t *oob = buf + (1<<ra->page_shift);
++
++ use_gdma = flags & FLAG_USE_GDMA;
++ ecc_en = flags & FLAG_ECC_EN;
++
++ oob[ra->badblockpos] = 0xff; //tag as good block.
++ ra->buffers_page = -1; //cached
++
++ page = page & (CFG_CHIPSIZE-1); //chip boundary
++ size = CFG_PAGESIZE + CFG_PAGE_OOBSIZE; //add oobsize
++ bus_addr = (page << (CFG_COLUMN_ADDR_CYCLE*8)); //write_page always write from offset 0.
++
++ if (is_nand_page_2048) {
++ bus_addr2 = page >> (CFG_COLUMN_ADDR_CYCLE*8);
++ cmd1 = 0x80;
++ cmd3 = 0x10;
++ conf = 0x001123| ((CFG_ADDR_CYCLE)<<16) | (size << 20);
++ }
++ else {
++ cmd1 = 0x8000;
++ cmd3 = 0x10;
++ conf = 0x001223| ((CFG_ADDR_CYCLE)<<16) | (size << 20);
++}
++ if (ecc_en)
++ conf |= (1<<3); //enable ecc
++ if (use_gdma)
++ conf |= (1<<2);
++
++ // set NFC
++ ra_dbg("nfc_write_page: cmd1: %x, cmd3: %x bus_addr: %x, conf: %x, len:%x\n",
++ cmd1, cmd3, bus_addr, conf, size);
++
++ status = _nfc_write_raw_data(cmd1, cmd3, bus_addr, bus_addr2, conf, buf, size, flags);
++ if (status & NAND_STATUS_FAIL) {
++ printk("%s: fail \n", __func__);
++ return -EIO;
++ }
++
++
++ if (flags & FLAG_VERIFY) { // verify and correct ecc
++ status = nfc_ecc_verify(ra, buf, page, FL_WRITING);
++
++#ifdef RANDOM_GEN_BAD_BLOCK
++ if (((random32() & 0x1ff) == 0x0) && (page >= 0x100)) // randomly create bad block
++ {
++ printk("hmm... create a bad block at page %x\n", (bus_addr >> 16));
++ status = -1;
++ }
++#endif
++
++ if (status != 0) {
++ printk("%s: ecc_verify fail: ret:%x \n", __func__, status);
++ oob[ra->badblockpos] = 0x33;
++ page -= page % (CFG_BLOCKSIZE/CFG_PAGESIZE);
++ printk("create a bad block at page %x\n", page);
++ if (!is_nand_page_2048)
++ status = nfc_write_oob(ra, page, ra->badblockpos, oob+ra->badblockpos, 1, flags);
++ else
++ {
++ status = _nfc_write_raw_data(cmd1, cmd3, bus_addr, bus_addr2, conf, buf, size, flags);
++ nfc_write_oob(ra, page, 0, oob, 16, FLAG_NONE);
++ }
++ return -EBADMSG;
++ }
++ }
++
++
++ ra->buffers_page = page; //cached
++ return 0;
++}
++
++
++
++/*************************************************************
++ * nand internal process
++ *************************************************************/
++
++/**
++ * nand_release_device - [GENERIC] release chip
++ * @mtd: MTD device structure
++ *
++ * Deselect, release chip lock and wake up anyone waiting on the device
++ */
++static void nand_release_device(struct ra_nand_chip *ra)
++{
++ /* De-select the NAND device */
++ nfc_select_chip(ra, -1);
++
++ /* Release the controller and the chip */
++ ra->state = FL_READY;
++
++ mutex_unlock(ra->controller);
++}
++
++/**
++ * nand_get_device - [GENERIC] Get chip for selected access
++ * @chip: the nand chip descriptor
++ * @mtd: MTD device structure
++ * @new_state: the state which is requested
++ *
++ * Get the device and lock it for exclusive access
++ */
++static int
++nand_get_device(struct ra_nand_chip *ra, int new_state)
++{
++ int ret = 0;
++
++ ret = mutex_lock_interruptible(ra->controller);
++ if (!ret)
++ ra->state = new_state;
++
++ return ret;
++
++}
++
++
++
++/*************************************************************
++ * nand internal process
++ *************************************************************/
++
++int nand_bbt_get(struct ra_nand_chip *ra, int block)
++{
++ int byte, bits;
++ bits = block * BBTTAG_BITS;
++
++ byte = bits / 8;
++ bits = bits % 8;
++
++ return (ra->bbt[byte] >> bits) & BBTTAG_BITS_MASK;
++}
++
++int nand_bbt_set(struct ra_nand_chip *ra, int block, int tag)
++{
++ int byte, bits;
++ bits = block * BBTTAG_BITS;
++
++ byte = bits / 8;
++ bits = bits % 8;
++
++ // If previous tag is bad, dont overwrite it
++ if (((ra->bbt[byte] >> bits) & BBTTAG_BITS_MASK) == BBT_TAG_BAD)
++ {
++ return BBT_TAG_BAD;
++ }
++
++ ra->bbt[byte] = (ra->bbt[byte] & ~(BBTTAG_BITS_MASK << bits)) | ((tag & BBTTAG_BITS_MASK) << bits);
++
++ return tag;
++}
++
++/**
++ * nand_block_checkbad - [GENERIC] Check if a block is marked bad
++ * @mtd: MTD device structure
++ * @ofs: offset from device start
++ *
++ * Check, if the block is bad. Either by reading the bad block table or
++ * calling of the scan function.
++ */
++int nand_block_checkbad(struct ra_nand_chip *ra, loff_t offs)
++{
++ int page, block;
++ int ret = 4;
++ unsigned int tag;
++ char *str[]= {"UNK", "RES", "BAD", "GOOD"};
++
++ if (ranfc_bbt == 0)
++ return 0;
++
++ {
++ // align with chip
++
++ offs = offs & ((1<<ra->chip_shift) -1);
++
++ page = offs >> ra->page_shift;
++ block = offs >> ra->erase_shift;
++ }
++
++ tag = nand_bbt_get(ra, block);
++
++ if (tag == BBT_TAG_UNKNOWN) {
++ ret = nfc_read_oob(ra, page, ra->badblockpos, (char*)&tag, 1, FLAG_NONE);
++ if (ret == 0)
++ tag = ((le32_to_cpu(tag) & 0x0ff) == 0x0ff) ? BBT_TAG_GOOD : BBT_TAG_BAD;
++ else
++ tag = BBT_TAG_BAD;
++
++ nand_bbt_set(ra, block, tag);
++ }
++
++ if (tag != BBT_TAG_GOOD) {
++ printk("%s: offs:%x tag: %s \n", __func__, (unsigned int)offs, str[tag]);
++ return 1;
++ }
++ else
++ return 0;
++
++}
++
++
++
++/**
++ * nand_block_markbad -
++ */
++int nand_block_markbad(struct ra_nand_chip *ra, loff_t offs)
++{
++ int page, block;
++ int ret = 4;
++ unsigned int tag;
++ char *ecc;
++
++ // align with chip
++ ra_dbg("%s offs: %x \n", __func__, (int)offs);
++
++ offs = offs & ((1<<ra->chip_shift) -1);
++
++ page = offs >> ra->page_shift;
++ block = offs >> ra->erase_shift;
++
++ tag = nand_bbt_get(ra, block);
++
++ if (tag == BBT_TAG_BAD) {
++ printk("%s: mark repeatedly \n", __func__);
++ return 0;
++ }
++
++ // new tag as bad
++ tag =BBT_TAG_BAD;
++ ret = nfc_read_page(ra, ra->buffers, page, FLAG_NONE);
++ if (ret != 0) {
++ printk("%s: fail to read bad block tag \n", __func__);
++ goto tag_bbt;
++ }
++
++ ecc = &ra->buffers[(1<<ra->page_shift)+ra->badblockpos];
++ if (*ecc == (char)0x0ff) {
++ //tag into flash
++ *ecc = (char)tag;
++ ret = nfc_write_page(ra, ra->buffers, page, FLAG_USE_GDMA);
++ if (ret)
++ printk("%s: fail to write bad block tag \n", __func__);
++
++ }
++
++tag_bbt:
++ //update bbt
++ nand_bbt_set(ra, block, tag);
++
++ return 0;
++}
++
++
++#if defined (WORKAROUND_RX_BUF_OV)
++/**
++ * to find a bad block for ecc verify of read_page
++ */
++unsigned int nand_bbt_find_sandbox(struct ra_nand_chip *ra)
++{
++ loff_t offs = 0;
++ int chipsize = 1 << ra->chip_shift;
++ int blocksize = 1 << ra->erase_shift;
++
++
++ while (offs < chipsize) {
++ if (nand_block_checkbad(ra, offs)) //scan and verify the unknown tag
++ break;
++ offs += blocksize;
++ }
++
++ if (offs >= chipsize) {
++ offs = chipsize - blocksize;
++ }
++
++ nand_bbt_set(ra, (unsigned int)offs>>ra->erase_shift, BBT_TAG_RES); // tag bbt only, instead of update badblockpos of flash.
++ return (offs >> ra->page_shift);
++}
++#endif
++
++
++
++/**
++ * nand_erase_nand - [Internal] erase block(s)
++ * @mtd: MTD device structure
++ * @instr: erase instruction
++ * @allowbbt: allow erasing the bbt area
++ *
++ * Erase one ore more blocks
++ */
++int _nand_erase_nand(struct ra_nand_chip *ra, struct erase_info *instr)
++{
++ int page, len, status, ret;
++ unsigned int addr, blocksize = 1<<ra->erase_shift;
++
++ ra_dbg("%s: start:%x, len:%x \n", __func__,
++ (unsigned int)instr->addr, (unsigned int)instr->len);
++
++//#define BLOCK_ALIGNED(a) ((a) & (blocksize - 1)) // already defined
++
++ if (BLOCK_ALIGNED(instr->addr) || BLOCK_ALIGNED(instr->len)) {
++ ra_dbg("%s: erase block not aligned, addr:%x len:%x\n", __func__, instr->addr, instr->len);
++ return -EINVAL;
++ }
++
++ instr->fail_addr = 0xffffffff;
++
++ len = instr->len;
++ addr = instr->addr;
++ instr->state = MTD_ERASING;
++
++ while (len) {
++
++ page = (int)(addr >> ra->page_shift);
++
++ /* select device and check wp */
++ if (nfc_enable_chip(ra, addr, 0)) {
++ printk("%s: nand is write protected \n", __func__);
++ instr->state = MTD_ERASE_FAILED;
++ goto erase_exit;
++ }
++
++ /* if we have a bad block, we do not erase bad blocks */
++ if (nand_block_checkbad(ra, addr)) {
++ printk(KERN_WARNING "nand_erase: attempt to erase a "
++ "bad block at 0x%08x\n", addr);
++ instr->state = MTD_ERASE_FAILED;
++ goto erase_exit;
++ }
++
++ /*
++ * Invalidate the page cache, if we erase the block which
++ * contains the current cached page
++ */
++ if (BLOCK_ALIGNED(addr) == BLOCK_ALIGNED(ra->buffers_page << ra->page_shift))
++ ra->buffers_page = -1;
++
++ status = nfc_erase_block(ra, page);
++ /* See if block erase succeeded */
++ if (status) {
++ printk("%s: failed erase, page 0x%08x\n", __func__, page);
++ instr->state = MTD_ERASE_FAILED;
++ instr->fail_addr = (page << ra->page_shift);
++ goto erase_exit;
++ }
++
++
++ /* Increment page address and decrement length */
++ len -= blocksize;
++ addr += blocksize;
++
++ }
++ instr->state = MTD_ERASE_DONE;
++
++erase_exit:
++
++ ret = ((instr->state == MTD_ERASE_DONE) ? 0 : -EIO);
++ /* Do call back function */
++ if (!ret)
++ mtd_erase_callback(instr);
++
++ if (ret) {
++ nand_bbt_set(ra, addr >> ra->erase_shift, BBT_TAG_BAD);
++ }
++
++ /* Return more or less happy */
++ return ret;
++}
++
++static int
++nand_write_oob_buf(struct ra_nand_chip *ra, uint8_t *buf, uint8_t *oob, size_t size,
++ int mode, int ooboffs)
++{
++ size_t oobsize = 1<<ra->oob_shift;
++ struct nand_oobfree *free;
++ uint32_t woffs = ooboffs;
++ int retsize = 0;
++
++ ra_dbg("%s: size:%x, mode:%x, offs:%x \n", __func__, size, mode, ooboffs);
++
++ switch(mode) {
++ case MTD_OPS_PLACE_OOB:
++ case MTD_OPS_RAW:
++ if (ooboffs > oobsize)
++ return -1;
++
++ size = min(size, oobsize - ooboffs);
++ memcpy(buf + ooboffs, oob, size);
++ retsize = size;
++ break;
++
++ case MTD_OPS_AUTO_OOB:
++ if (ooboffs > ra->oob->oobavail)
++ return -1;
++
++ while (size) {
++ for(free = ra->oob->oobfree; free->length && size; free++) {
++ int wlen = free->length - woffs;
++ int bytes = 0;
++
++ /* Write request not from offset 0 ? */
++ if (wlen <= 0) {
++ woffs = -wlen;
++ continue;
++ }
++
++ bytes = min_t(size_t, size, wlen);
++ memcpy (buf + free->offset + woffs, oob, bytes);
++ woffs = 0;
++ oob += bytes;
++ size -= bytes;
++ retsize += bytes;
++ }
++ buf += oobsize;
++ }
++ break;
++
++ default:
++ BUG();
++ }
++
++ return retsize;
++}
++
++static int nand_read_oob_buf(struct ra_nand_chip *ra, uint8_t *oob, size_t size,
++ int mode, int ooboffs)
++{
++ size_t oobsize = 1<<ra->oob_shift;
++ uint8_t *buf = ra->buffers + (1<<ra->page_shift);
++ int retsize=0;
++
++ ra_dbg("%s: size:%x, mode:%x, offs:%x \n", __func__, size, mode, ooboffs);
++
++ switch(mode) {
++ case MTD_OPS_PLACE_OOB:
++ case MTD_OPS_RAW:
++ if (ooboffs > oobsize)
++ return -1;
++
++ size = min(size, oobsize - ooboffs);
++ memcpy(oob, buf + ooboffs, size);
++ return size;
++
++ case MTD_OPS_AUTO_OOB: {
++ struct nand_oobfree *free;
++ uint32_t woffs = ooboffs;
++
++ if (ooboffs > ra->oob->oobavail)
++ return -1;
++
++ size = min(size, ra->oob->oobavail - ooboffs);
++ for(free = ra->oob->oobfree; free->length && size; free++) {
++ int wlen = free->length - woffs;
++ int bytes = 0;
++
++ /* Write request not from offset 0 ? */
++ if (wlen <= 0) {
++ woffs = -wlen;
++ continue;
++ }
++
++ bytes = min_t(size_t, size, wlen);
++ memcpy (oob, buf + free->offset + woffs, bytes);
++ woffs = 0;
++ oob += bytes;
++ size -= bytes;
++ retsize += bytes;
++ }
++ return retsize;
++ }
++ default:
++ BUG();
++ }
++
++ return -1;
++}
++
++/**
++ * nand_do_write_ops - [Internal] NAND write with ECC
++ * @mtd: MTD device structure
++ * @to: offset to write to
++ * @ops: oob operations description structure
++ *
++ * NAND write with ECC
++ */
++static int nand_do_write_ops(struct ra_nand_chip *ra, loff_t to,
++ struct mtd_oob_ops *ops)
++{
++ int page;
++ uint32_t datalen = ops->len;
++ uint32_t ooblen = ops->ooblen;
++ uint8_t *oob = ops->oobbuf;
++ uint8_t *data = ops->datbuf;
++ int pagesize = (1<<ra->page_shift);
++ int pagemask = (pagesize -1);
++ int oobsize = 1<<ra->oob_shift;
++ loff_t addr = to;
++ //int i = 0; //for ra_dbg only
++
++ ra_dbg("%s: to:%x, ops data:%p, oob:%p datalen:%x ooblen:%x, ooboffs:%x oobmode:%x \n",
++ __func__, (unsigned int)to, data, oob, datalen, ooblen, ops->ooboffs, ops->mode);
++
++ ops->retlen = 0;
++ ops->oobretlen = 0;
++
++
++ /* Invalidate the page cache, when we write to the cached page */
++ ra->buffers_page = -1;
++
++
++ if (data ==0)
++ datalen = 0;
++
++ // oob sequential (burst) write
++ if (datalen == 0 && ooblen) {
++ int len = ((ooblen + ops->ooboffs) + (ra->oob->oobavail - 1)) / ra->oob->oobavail * oobsize;
++
++ /* select chip, and check if it is write protected */
++ if (nfc_enable_chip(ra, addr, 0))
++ return -EIO;
++
++ //FIXME, need sanity check of block boundary
++ page = (int)((to & ((1<<ra->chip_shift)-1)) >> ra->page_shift); //chip boundary
++ memset(ra->buffers, 0x0ff, pagesize);
++ //fixme, should we reserve the original content?
++ if (ops->mode == MTD_OPS_AUTO_OOB) {
++ nfc_read_oob(ra, page, 0, ra->buffers, len, FLAG_NONE);
++ }
++ //prepare buffers
++ if (ooblen != 8)
++ {
++ nand_write_oob_buf(ra, ra->buffers, oob, ooblen, ops->mode, ops->ooboffs);
++ // write out buffer to chip
++ nfc_write_oob(ra, page, 0, ra->buffers, len, FLAG_USE_GDMA);
++ }
++
++ ops->oobretlen = ooblen;
++ ooblen = 0;
++ }
++
++ // data sequential (burst) write
++ if (datalen && ooblen == 0) {
++ // ranfc can not support write_data_burst, since hw-ecc and fifo constraints..
++ }
++
++ // page write
++ while(datalen || ooblen) {
++ int len;
++ int ret;
++ int offs;
++ int ecc_en = 0;
++
++ ra_dbg("%s (%d): addr:%x, ops data:%p, oob:%p datalen:%x ooblen:%x, ooboffs:%x \n",
++ __func__, i++, (unsigned int)addr, data, oob, datalen, ooblen, ops->ooboffs);
++
++ page = (int)((addr & ((1<<ra->chip_shift)-1)) >> ra->page_shift); //chip boundary
++
++ /* select chip, and check if it is write protected */
++ if (nfc_enable_chip(ra, addr, 0))
++ return -EIO;
++
++ // oob write
++ if (ops->mode == MTD_OPS_AUTO_OOB) {
++ //fixme, this path is not yet varified
++ nfc_read_oob(ra, page, 0, ra->buffers + pagesize, oobsize, FLAG_NONE);
++ }
++ if (oob && ooblen > 0) {
++ len = nand_write_oob_buf(ra, ra->buffers + pagesize, oob, ooblen, ops->mode, ops->ooboffs);
++ if (len < 0)
++ return -EINVAL;
++
++ oob += len;
++ ops->oobretlen += len;
++ ooblen -= len;
++ }
++
++ // data write
++ offs = addr & pagemask;
++ len = min_t(size_t, datalen, pagesize - offs);
++ if (data && len > 0) {
++ memcpy(ra->buffers + offs, data, len); // we can not sure ops->buf wether is DMA-able.
++
++ data += len;
++ datalen -= len;
++ ops->retlen += len;
++
++ ecc_en = FLAG_ECC_EN;
++ }
++ ret = nfc_write_page(ra, ra->buffers, page, FLAG_USE_GDMA | FLAG_VERIFY |
++ ((ops->mode == MTD_OPS_RAW || ops->mode == MTD_OPS_PLACE_OOB) ? 0 : ecc_en ));
++ if (ret) {
++ nand_bbt_set(ra, addr >> ra->erase_shift, BBT_TAG_BAD);
++ return ret;
++ }
++
++ nand_bbt_set(ra, addr >> ra->erase_shift, BBT_TAG_GOOD);
++
++ addr = (page+1) << ra->page_shift;
++
++ }
++ return 0;
++}
++
++/**
++ * nand_do_read_ops - [Internal] Read data with ECC
++ *
++ * @mtd: MTD device structure
++ * @from: offset to read from
++ * @ops: oob ops structure
++ *
++ * Internal function. Called with chip held.
++ */
++static int nand_do_read_ops(struct ra_nand_chip *ra, loff_t from,
++ struct mtd_oob_ops *ops)
++{
++ int page;
++ uint32_t datalen = ops->len;
++ uint32_t ooblen = ops->ooblen;
++ uint8_t *oob = ops->oobbuf;
++ uint8_t *data = ops->datbuf;
++ int pagesize = (1<<ra->page_shift);
++ int pagemask = (pagesize -1);
++ loff_t addr = from;
++ //int i = 0; //for ra_dbg only
++
++ ra_dbg("%s: addr:%x, ops data:%p, oob:%p datalen:%x ooblen:%x, ooboffs:%x \n",
++ __func__, (unsigned int)addr, data, oob, datalen, ooblen, ops->ooboffs);
++
++ ops->retlen = 0;
++ ops->oobretlen = 0;
++ if (data == 0)
++ datalen = 0;
++
++
++ while(datalen || ooblen) {
++ int len;
++ int ret;
++ int offs;
++
++ ra_dbg("%s (%d): addr:%x, ops data:%p, oob:%p datalen:%x ooblen:%x, ooboffs:%x \n",
++ __func__, i++, (unsigned int)addr, data, oob, datalen, ooblen, ops->ooboffs);
++ /* select chip */
++ if (nfc_enable_chip(ra, addr, 1) < 0)
++ return -EIO;
++
++ page = (int)((addr & ((1<<ra->chip_shift)-1)) >> ra->page_shift);
++
++ ret = nfc_read_page(ra, ra->buffers, page, FLAG_VERIFY |
++ ((ops->mode == MTD_OPS_RAW || ops->mode == MTD_OPS_PLACE_OOB) ? 0: FLAG_ECC_EN ));
++ //FIXME, something strange here, some page needs 2 more tries to guarantee read success.
++ if (ret) {
++ printk("read again:\n");
++ ret = nfc_read_page(ra, ra->buffers, page, FLAG_VERIFY |
++ ((ops->mode == MTD_OPS_RAW || ops->mode == MTD_OPS_PLACE_OOB) ? 0: FLAG_ECC_EN ));
++
++ if (ret) {
++ printk("read again fail \n");
++ nand_bbt_set(ra, addr >> ra->erase_shift, BBT_TAG_BAD);
++ if ((ret != -EUCLEAN) && (ret != -EBADMSG)) {
++ return ret;
++ }
++ else {
++ /* ecc verification fail, but data need to be returned. */
++ }
++ }
++ else {
++ printk(" read agian susccess \n");
++ }
++ }
++
++ // oob read
++ if (oob && ooblen > 0) {
++ len = nand_read_oob_buf(ra, oob, ooblen, ops->mode, ops->ooboffs);
++ if (len < 0) {
++ printk("nand_read_oob_buf: fail return %x \n", len);
++ return -EINVAL;
++ }
++
++ oob += len;
++ ops->oobretlen += len;
++ ooblen -= len;
++ }
++
++ // data read
++ offs = addr & pagemask;
++ len = min_t(size_t, datalen, pagesize - offs);
++ if (data && len > 0) {
++ memcpy(data, ra->buffers + offs, len); // we can not sure ops->buf wether is DMA-able.
++
++ data += len;
++ datalen -= len;
++ ops->retlen += len;
++ if (ret)
++ return ret;
++ }
++
++
++ nand_bbt_set(ra, addr >> ra->erase_shift, BBT_TAG_GOOD);
++ // address go further to next page, instead of increasing of length of write. This avoids some special cases wrong.
++ addr = (page+1) << ra->page_shift;
++ }
++ return 0;
++}
++
++static int
++ramtd_nand_erase(struct mtd_info *mtd, struct erase_info *instr)
++{
++ struct ra_nand_chip *ra = (struct ra_nand_chip *)mtd->priv;
++ int ret;
++
++ ra_dbg("%s: start:%x, len:%x \n", __func__,
++ (unsigned int)instr->addr, (unsigned int)instr->len);
++
++ nand_get_device(ra, FL_ERASING);
++ ret = _nand_erase_nand((struct ra_nand_chip *)mtd->priv, instr);
++ nand_release_device(ra);
++
++ return ret;
++}
++
++static int
++ramtd_nand_write(struct mtd_info *mtd, loff_t to, size_t len,
++ size_t *retlen, const uint8_t *buf)
++{
++ struct ra_nand_chip *ra = mtd->priv;
++ struct mtd_oob_ops ops;
++ int ret;
++
++ ra_dbg("%s: to 0x%x len=0x%x\n", __func__, to, len);
++
++ if ((to + len) > mtd->size)
++ return -EINVAL;
++
++ if (!len)
++ return 0;
++
++ nand_get_device(ra, FL_WRITING);
++
++ memset(&ops, 0, sizeof(ops));
++ ops.len = len;
++ ops.datbuf = (uint8_t *)buf;
++ ops.oobbuf = NULL;
++ ops.mode = MTD_OPS_AUTO_OOB;
++
++ ret = nand_do_write_ops(ra, to, &ops);
++
++ *retlen = ops.retlen;
++
++ nand_release_device(ra);
++
++ return ret;
++}
++
++static int
++ramtd_nand_read(struct mtd_info *mtd, loff_t from, size_t len,
++ size_t *retlen, uint8_t *buf)
++{
++
++ struct ra_nand_chip *ra = mtd->priv;
++ int ret;
++ struct mtd_oob_ops ops;
++
++ ra_dbg("%s: mtd:%p from:%x, len:%x, buf:%p \n", __func__, mtd, (unsigned int)from, len, buf);
++
++ /* Do not allow reads past end of device */
++ if ((from + len) > mtd->size)
++ return -EINVAL;
++ if (!len)
++ return 0;
++
++ nand_get_device(ra, FL_READING);
++
++ memset(&ops, 0, sizeof(ops));
++ ops.len = len;
++ ops.datbuf = buf;
++ ops.oobbuf = NULL;
++ ops.mode = MTD_OPS_AUTO_OOB;
++
++ ret = nand_do_read_ops(ra, from, &ops);
++
++ *retlen = ops.retlen;
++
++ nand_release_device(ra);
++
++ return ret;
++
++}
++
++static int
++ramtd_nand_readoob(struct mtd_info *mtd, loff_t from,
++ struct mtd_oob_ops *ops)
++{
++ struct ra_nand_chip *ra = mtd->priv;
++ int ret;
++
++ ra_dbg("%s: \n", __func__);
++
++ nand_get_device(ra, FL_READING);
++
++ ret = nand_do_read_ops(ra, from, ops);
++
++ nand_release_device(ra);
++
++ return ret;
++}
++
++static int
++ramtd_nand_writeoob(struct mtd_info *mtd, loff_t to,
++ struct mtd_oob_ops *ops)
++{
++ struct ra_nand_chip *ra = mtd->priv;
++ int ret;
++
++ nand_get_device(ra, FL_READING);
++ ret = nand_do_write_ops(ra, to, ops);
++ nand_release_device(ra);
++
++ return ret;
++}
++
++static int
++ramtd_nand_block_isbad(struct mtd_info *mtd, loff_t offs)
++{
++ if (offs > mtd->size)
++ return -EINVAL;
++
++ return nand_block_checkbad((struct ra_nand_chip *)mtd->priv, offs);
++}
++
++static int
++ramtd_nand_block_markbad(struct mtd_info *mtd, loff_t ofs)
++{
++ struct ra_nand_chip *ra = mtd->priv;
++ int ret;
++
++ ra_dbg("%s: \n", __func__);
++ nand_get_device(ra, FL_WRITING);
++ ret = nand_block_markbad(ra, ofs);
++ nand_release_device(ra);
++
++ return ret;
++}
++
++// 1-bit error detection
++static int one_bit_correction(char *ecc1, char *ecc2, int *bytes, int *bits)
++{
++ // check if ecc and expected are all valid
++ char *p, nibble, crumb;
++ int i, xor, iecc1 = 0, iecc2 = 0;
++
++ printk("correction : %x %x %x\n", ecc1[0], ecc1[1], ecc1[2]);
++ printk("correction : %x %x %x\n", ecc2[0], ecc2[1], ecc2[2]);
++
++ p = (char *)ecc1;
++ for (i = 0; i < CONFIG_ECC_BYTES; i++)
++ {
++ nibble = *(p+i) & 0xf;
++ if ((nibble != 0x0) && (nibble != 0xf) && (nibble != 0x3) && (nibble != 0xc) &&
++ (nibble != 0x5) && (nibble != 0xa) && (nibble != 0x6) && (nibble != 0x9))
++ return -1;
++ nibble = ((*(p+i)) >> 4) & 0xf;
++ if ((nibble != 0x0) && (nibble != 0xf) && (nibble != 0x3) && (nibble != 0xc) &&
++ (nibble != 0x5) && (nibble != 0xa) && (nibble != 0x6) && (nibble != 0x9))
++ return -1;
++ }
++
++ p = (char *)ecc2;
++ for (i = 0; i < CONFIG_ECC_BYTES; i++)
++ {
++ nibble = *(p+i) & 0xf;
++ if ((nibble != 0x0) && (nibble != 0xf) && (nibble != 0x3) && (nibble != 0xc) &&
++ (nibble != 0x5) && (nibble != 0xa) && (nibble != 0x6) && (nibble != 0x9))
++ return -1;
++ nibble = ((*(p+i)) >> 4) & 0xf;
++ if ((nibble != 0x0) && (nibble != 0xf) && (nibble != 0x3) && (nibble != 0xc) &&
++ (nibble != 0x5) && (nibble != 0xa) && (nibble != 0x6) && (nibble != 0x9))
++ return -1;
++ }
++
++ memcpy(&iecc1, ecc1, 3);
++ memcpy(&iecc2, ecc2, 3);
++
++ xor = iecc1 ^ iecc2;
++ printk("xor = %x (%x %x)\n", xor, iecc1, iecc2);
++
++ *bytes = 0;
++ for (i = 0; i < 9; i++)
++ {
++ crumb = (xor >> (2*i)) & 0x3;
++ if ((crumb == 0x0) || (crumb == 0x3))
++ return -1;
++ if (crumb == 0x2)
++ *bytes += (1 << i);
++ }
++
++ *bits = 0;
++ for (i = 0; i < 3; i++)
++ {
++ crumb = (xor >> (18 + 2*i)) & 0x3;
++ if ((crumb == 0x0) || (crumb == 0x3))
++ return -1;
++ if (crumb == 0x2)
++ *bits += (1 << i);
++ }
++
++ return 0;
++}
++
++
++
++/************************************************************
++ * the init/exit section.
++ */
++
++static struct nand_ecclayout ra_oob_layout = {
++ .eccbytes = CONFIG_ECC_BYTES,
++ .eccpos = {5, 6, 7},
++ .oobfree = {
++ {.offset = 0, .length = 4},
++ {.offset = 8, .length = 8},
++ {.offset = 0, .length = 0}
++ },
++#define RA_CHIP_OOB_AVAIL (4+8)
++ .oobavail = RA_CHIP_OOB_AVAIL,
++ // 5th byte is bad-block flag.
++};
++
++static int
++mtk_nand_probe(struct platform_device *pdev)
++{
++ struct mtd_part_parser_data ppdata;
++ struct ra_nand_chip *ra;
++ int alloc_size, bbt_size, buffers_size, reg, err;
++ unsigned char chip_mode = 12;
++
++/* if(ra_check_flash_type()!=BOOT_FROM_NAND) {
++ return 0;
++ }*/
++
++ //FIXME: config 512 or 2048-byte page according to HWCONF
++#if defined (CONFIG_RALINK_RT6855A)
++ reg = ra_inl(RALINK_SYSCTL_BASE+0x8c);
++ chip_mode = ((reg>>28) & 0x3)|(((reg>>22) & 0x3)<<2);
++ if (chip_mode == 1) {
++ printk("! nand 2048\n");
++ ra_or(NFC_CONF1, 1);
++ is_nand_page_2048 = 1;
++ nand_addrlen = 5;
++ }
++ else {
++ printk("! nand 512\n");
++ ra_and(NFC_CONF1, ~1);
++ is_nand_page_2048 = 0;
++ nand_addrlen = 4;
++ }
++#elif (defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_RT6855))
++ ra_outl(RALINK_SYSCTL_BASE+0x60, ra_inl(RALINK_SYSCTL_BASE+0x60) & ~(0x3<<18));
++ reg = ra_inl(RALINK_SYSCTL_BASE+0x10);
++ chip_mode = (reg & 0x0F);
++ if((chip_mode==1)||(chip_mode==11)) {
++ ra_or(NFC_CONF1, 1);
++ is_nand_page_2048 = 1;
++ nand_addrlen = ((chip_mode!=11) ? 4 : 5);
++ printk("!!! nand page size = 2048, addr len=%d\n", nand_addrlen);
++ }
++ else {
++ ra_and(NFC_CONF1, ~1);
++ is_nand_page_2048 = 0;
++ nand_addrlen = ((chip_mode!=10) ? 3 : 4);
++ printk("!!! nand page size = 512, addr len=%d\n", nand_addrlen);
++ }
++#else
++ is_nand_page_2048 = 0;
++ nand_addrlen = 3;
++ printk("!!! nand page size = 512, addr len=%d\n", nand_addrlen);
++#endif
++
++#if defined (CONFIG_RALINK_RT6855A) || defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_RT6855)
++ //config ECC location
++ ra_and(NFC_CONF1, 0xfff000ff);
++ ra_or(NFC_CONF1, ((CONFIG_ECC_OFFSET + 2) << 16) +
++ ((CONFIG_ECC_OFFSET + 1) << 12) +
++ (CONFIG_ECC_OFFSET << 8));
++#endif
++
++#define ALIGNE_16(a) (((unsigned long)(a)+15) & ~15)
++ buffers_size = ALIGNE_16((1<<CONFIG_PAGE_SIZE_BIT) + (1<<CONFIG_OOBSIZE_PER_PAGE_BIT)); //ra->buffers
++ bbt_size = BBTTAG_BITS * (1<<(CONFIG_CHIP_SIZE_BIT - (CONFIG_PAGE_SIZE_BIT + CONFIG_NUMPAGE_PER_BLOCK_BIT))) / 8; //ra->bbt
++ bbt_size = ALIGNE_16(bbt_size);
++
++ alloc_size = buffers_size + bbt_size;
++ alloc_size += buffers_size; //for ra->readback_buffers
++ alloc_size += sizeof(*ra);
++ alloc_size += sizeof(*ranfc_mtd);
++
++ //make sure gpio-0 is input
++ ra_outl(RALINK_PIO_BASE+0x24, ra_inl(RALINK_PIO_BASE+0x24) & ~0x01);
++
++ ra = (struct ra_nand_chip *)kzalloc(alloc_size, GFP_KERNEL | GFP_DMA);
++ if (!ra) {
++ printk("%s: mem alloc fail \n", __func__);
++ return -ENOMEM;
++ }
++ memset(ra, 0, alloc_size);
++
++ //dynamic
++ ra->buffers = (char *)((char *)ra + sizeof(*ra));
++ ra->readback_buffers = ra->buffers + buffers_size;
++ ra->bbt = ra->readback_buffers + buffers_size;
++ ranfc_mtd = (struct mtd_info *)(ra->bbt + bbt_size);
++
++ //static
++ ra->numchips = CONFIG_NUMCHIPS;
++ ra->chip_shift = CONFIG_CHIP_SIZE_BIT;
++ ra->page_shift = CONFIG_PAGE_SIZE_BIT;
++ ra->oob_shift = CONFIG_OOBSIZE_PER_PAGE_BIT;
++ ra->erase_shift = (CONFIG_PAGE_SIZE_BIT + CONFIG_NUMPAGE_PER_BLOCK_BIT);
++ ra->badblockpos = CONFIG_BAD_BLOCK_POS;
++ ra_oob_layout.eccpos[0] = CONFIG_ECC_OFFSET;
++ ra_oob_layout.eccpos[1] = CONFIG_ECC_OFFSET + 1;
++ ra_oob_layout.eccpos[2] = CONFIG_ECC_OFFSET + 2;
++ ra->oob = &ra_oob_layout;
++ ra->buffers_page = -1;
++
++#if defined (WORKAROUND_RX_BUF_OV)
++ if (ranfc_verify) {
++ ra->sandbox_page = nand_bbt_find_sandbox(ra);
++ }
++#endif
++ ra_outl(NFC_CTRL, ra_inl(NFC_CTRL) | 0x01); //set wp to high
++ nfc_all_reset();
++
++ ranfc_mtd->type = MTD_NANDFLASH;
++ ranfc_mtd->flags = MTD_CAP_NANDFLASH;
++ ranfc_mtd->size = CONFIG_NUMCHIPS * CFG_CHIPSIZE;
++ ranfc_mtd->erasesize = CFG_BLOCKSIZE;
++ ranfc_mtd->writesize = CFG_PAGESIZE;
++ ranfc_mtd->oobsize = CFG_PAGE_OOBSIZE;
++ ranfc_mtd->oobavail = RA_CHIP_OOB_AVAIL;
++ ranfc_mtd->name = "ra_nfc";
++ //ranfc_mtd->index
++ ranfc_mtd->ecclayout = &ra_oob_layout;
++ //ranfc_mtd->numberaseregions
++ //ranfc_mtd->eraseregions
++ //ranfc_mtd->bansize
++ ranfc_mtd->_erase = ramtd_nand_erase;
++ //ranfc_mtd->point
++ //ranfc_mtd->unpoint
++ ranfc_mtd->_read = ramtd_nand_read;
++ ranfc_mtd->_write = ramtd_nand_write;
++ ranfc_mtd->_read_oob = ramtd_nand_readoob;
++ ranfc_mtd->_write_oob = ramtd_nand_writeoob;
++ //ranfc_mtd->get_fact_prot_info; ranfc_mtd->read_fact_prot_reg;
++ //ranfc_mtd->get_user_prot_info; ranfc_mtd->read_user_prot_reg;
++ //ranfc_mtd->write_user_prot_reg; ranfc_mtd->lock_user_prot_reg;
++ //ranfc_mtd->writev; ranfc_mtd->sync; ranfc_mtd->lock; ranfc_mtd->unlock; ranfc_mtd->suspend; ranfc_mtd->resume;
++ ranfc_mtd->_block_isbad = ramtd_nand_block_isbad;
++ ranfc_mtd->_block_markbad = ramtd_nand_block_markbad;
++ //ranfc_mtd->reboot_notifier
++ //ranfc_mtd->ecc_stats;
++ // subpage_sht;
++
++ //ranfc_mtd->get_device; ranfc_mtd->put_device
++ ranfc_mtd->priv = ra;
++
++ ranfc_mtd->owner = THIS_MODULE;
++ ra->controller = &ra->hwcontrol;
++ mutex_init(ra->controller);
++
++ printk("%s: alloc %x, at %p , btt(%p, %x), ranfc_mtd:%p\n",
++ __func__ , alloc_size, ra, ra->bbt, bbt_size, ranfc_mtd);
++
++ ppdata.of_node = pdev->dev.of_node;
++ err = mtd_device_parse_register(ranfc_mtd, mtk_probe_types,
++ &ppdata, NULL, 0);
++
++ return err;
++}
++
++static int
++mtk_nand_remove(struct platform_device *pdev)
++{
++ struct ra_nand_chip *ra;
++
++ if (ranfc_mtd) {
++ ra = (struct ra_nand_chip *)ranfc_mtd->priv;
++
++ /* Deregister partitions */
++ //del_mtd_partitions(ranfc_mtd);
++ kfree(ra);
++ }
++ return 0;
++}
++
++static const struct of_device_id mtk_nand_match[] = {
++ { .compatible = "mtk,mt7620-nand" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, mtk_nand_match);
++
++static struct platform_driver mtk_nand_driver = {
++ .probe = mtk_nand_probe,
++ .remove = mtk_nand_remove,
++ .driver = {
++ .name = "mt7620_nand",
++ .owner = THIS_MODULE,
++ .of_match_table = mtk_nand_match,
++ },
++};
++
++module_platform_driver(mtk_nand_driver);
++
++
++MODULE_LICENSE("GPL");
+diff --git a/drivers/mtd/maps/ralink_nand.h b/drivers/mtd/maps/ralink_nand.h
+new file mode 100644
+index 0000000..a408ae9
+--- /dev/null
++++ b/drivers/mtd/maps/ralink_nand.h
+@@ -0,0 +1,232 @@
++#ifndef RT2880_NAND_H
++#define RT2880_NAND_H
++
++#include <linux/mtd/mtd.h>
++
++//#include "gdma.h"
++
++#define RALINK_SYSCTL_BASE 0xB0000000
++#define RALINK_PIO_BASE 0xB0000600
++#define RALINK_NAND_CTRL_BASE 0xB0000810
++#define CONFIG_RALINK_MT7620
++
++#define SKIP_BAD_BLOCK
++//#define RANDOM_GEN_BAD_BLOCK
++
++#define ra_inl(addr) (*(volatile unsigned int *)(addr))
++#define ra_outl(addr, value) (*(volatile unsigned int *)(addr) = (value))
++#define ra_aor(addr, a_mask, o_value) ra_outl(addr, (ra_inl(addr) & (a_mask)) | (o_value))
++#define ra_and(addr, a_mask) ra_aor(addr, a_mask, 0)
++#define ra_or(addr, o_value) ra_aor(addr, -1, o_value)
++
++
++#define CONFIG_NUMCHIPS 1
++#define CONFIG_NOT_SUPPORT_WP //rt3052 has no WP signal for chip.
++//#define CONFIG_NOT_SUPPORT_RB
++
++extern int is_nand_page_2048;
++extern const unsigned int nand_size_map[2][3];
++
++//chip
++// chip geometry: SAMSUNG small size 32MB.
++#define CONFIG_CHIP_SIZE_BIT (nand_size_map[is_nand_page_2048][nand_addrlen-3]) //! (1<<NAND_SIZE_BYTE) MB
++//#define CONFIG_CHIP_SIZE_BIT (is_nand_page_2048? 29 : 25) //! (1<<NAND_SIZE_BYTE) MB
++#define CONFIG_PAGE_SIZE_BIT (is_nand_page_2048? 11 : 9) //! (1<<PAGE_SIZE) MB
++//#define CONFIG_SUBPAGE_BIT 1 //! these bits will be compensate by command cycle
++#define CONFIG_NUMPAGE_PER_BLOCK_BIT (is_nand_page_2048? 6 : 5) //! order of number of pages a block.
++#define CONFIG_OOBSIZE_PER_PAGE_BIT (is_nand_page_2048? 6 : 4) //! byte number of oob a page.
++#define CONFIG_BAD_BLOCK_POS (is_nand_page_2048? 0 : 4) //! offset of byte to denote bad block.
++#define CONFIG_ECC_BYTES 3 //! ecc has 3 bytes
++#define CONFIG_ECC_OFFSET (is_nand_page_2048? 6 : 5) //! ecc starts from offset 5.
++
++//this section should not be modified.
++//#define CFG_COLUMN_ADDR_MASK ((1 << (CONFIG_PAGE_SIZE_BIT - CONFIG_SUBPAGE_BIT)) - 1)
++//#define CFG_COLUMN_ADDR_CYCLE (((CONFIG_PAGE_SIZE_BIT - CONFIG_SUBPAGE_BIT) + 7)/8)
++//#define CFG_ROW_ADDR_CYCLE ((CONFIG_CHIP_SIZE_BIT - CONFIG_PAGE_SIZE_BIT + 7)/8)
++//#define CFG_ADDR_CYCLE (CFG_COLUMN_ADDR_CYCLE + CFG_ROW_ADDR_CYCLE)
++
++#define CFG_COLUMN_ADDR_CYCLE (is_nand_page_2048? 2 : 1)
++#define CFG_ROW_ADDR_CYCLE (nand_addrlen - CFG_COLUMN_ADDR_CYCLE)
++#define CFG_ADDR_CYCLE (CFG_COLUMN_ADDR_CYCLE + CFG_ROW_ADDR_CYCLE)
++
++#define CFG_CHIPSIZE (1 << ((CONFIG_CHIP_SIZE_BIT>=32)? 31 : CONFIG_CHIP_SIZE_BIT))
++//#define CFG_CHIPSIZE (1 << CONFIG_CHIP_SIZE_BIT)
++#define CFG_PAGESIZE (1 << CONFIG_PAGE_SIZE_BIT)
++#define CFG_BLOCKSIZE (CFG_PAGESIZE << CONFIG_NUMPAGE_PER_BLOCK_BIT)
++#define CFG_NUMPAGE (1 << (CONFIG_CHIP_SIZE_BIT - CONFIG_PAGE_SIZE_BIT))
++#define CFG_NUMBLOCK (CFG_NUMPAGE >> CONFIG_NUMPAGE_PER_BLOCK_BIT)
++#define CFG_BLOCK_OOBSIZE (1 << (CONFIG_OOBSIZE_PER_PAGE_BIT + CONFIG_NUMPAGE_PER_BLOCK_BIT))
++#define CFG_PAGE_OOBSIZE (1 << CONFIG_OOBSIZE_PER_PAGE_BIT)
++
++#define NAND_BLOCK_ALIGN(addr) ((addr) & (CFG_BLOCKSIZE-1))
++#define NAND_PAGE_ALIGN(addr) ((addr) & (CFG_PAGESIZE-1))
++
++
++#define NFC_BASE RALINK_NAND_CTRL_BASE
++#define NFC_CTRL (NFC_BASE + 0x0)
++#define NFC_CONF (NFC_BASE + 0x4)
++#define NFC_CMD1 (NFC_BASE + 0x8)
++#define NFC_CMD2 (NFC_BASE + 0xc)
++#define NFC_CMD3 (NFC_BASE + 0x10)
++#define NFC_ADDR (NFC_BASE + 0x14)
++#define NFC_DATA (NFC_BASE + 0x18)
++#if defined (CONFIG_RALINK_RT6855) || defined (CONFIG_RALINK_RT6855A) || \
++ defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621)
++#define NFC_ECC (NFC_BASE + 0x30)
++#else
++#define NFC_ECC (NFC_BASE + 0x1c)
++#endif
++#define NFC_STATUS (NFC_BASE + 0x20)
++#define NFC_INT_EN (NFC_BASE + 0x24)
++#define NFC_INT_ST (NFC_BASE + 0x28)
++#if defined (CONFIG_RALINK_RT6855) || defined (CONFIG_RALINK_RT6855A) || \
++ defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621)
++#define NFC_CONF1 (NFC_BASE + 0x2c)
++#define NFC_ECC_P1 (NFC_BASE + 0x30)
++#define NFC_ECC_P2 (NFC_BASE + 0x34)
++#define NFC_ECC_P3 (NFC_BASE + 0x38)
++#define NFC_ECC_P4 (NFC_BASE + 0x3c)
++#define NFC_ECC_ERR1 (NFC_BASE + 0x40)
++#define NFC_ECC_ERR2 (NFC_BASE + 0x44)
++#define NFC_ECC_ERR3 (NFC_BASE + 0x48)
++#define NFC_ECC_ERR4 (NFC_BASE + 0x4c)
++#define NFC_ADDR2 (NFC_BASE + 0x50)
++#endif
++
++enum _int_stat {
++ INT_ST_ND_DONE = 1<<0,
++ INT_ST_TX_BUF_RDY = 1<<1,
++ INT_ST_RX_BUF_RDY = 1<<2,
++ INT_ST_ECC_ERR = 1<<3,
++ INT_ST_TX_TRAS_ERR = 1<<4,
++ INT_ST_RX_TRAS_ERR = 1<<5,
++ INT_ST_TX_KICK_ERR = 1<<6,
++ INT_ST_RX_KICK_ERR = 1<<7
++};
++
++
++//#define WORKAROUND_RX_BUF_OV 1
++
++
++/*************************************************************
++ * stolen from nand.h
++ *************************************************************/
++
++/*
++ * Standard NAND flash commands
++ */
++#define NAND_CMD_READ0 0
++#define NAND_CMD_READ1 1
++#define NAND_CMD_RNDOUT 5
++#define NAND_CMD_PAGEPROG 0x10
++#define NAND_CMD_READOOB 0x50
++#define NAND_CMD_ERASE1 0x60
++#define NAND_CMD_STATUS 0x70
++#define NAND_CMD_STATUS_MULTI 0x71
++#define NAND_CMD_SEQIN 0x80
++#define NAND_CMD_RNDIN 0x85
++#define NAND_CMD_READID 0x90
++#define NAND_CMD_ERASE2 0xd0
++#define NAND_CMD_RESET 0xff
++
++/* Extended commands for large page devices */
++#define NAND_CMD_READSTART 0x30
++#define NAND_CMD_RNDOUTSTART 0xE0
++#define NAND_CMD_CACHEDPROG 0x15
++
++/* Extended commands for AG-AND device */
++/*
++ * Note: the command for NAND_CMD_DEPLETE1 is really 0x00 but
++ * there is no way to distinguish that from NAND_CMD_READ0
++ * until the remaining sequence of commands has been completed
++ * so add a high order bit and mask it off in the command.
++ */
++#define NAND_CMD_DEPLETE1 0x100
++#define NAND_CMD_DEPLETE2 0x38
++#define NAND_CMD_STATUS_MULTI 0x71
++#define NAND_CMD_STATUS_ERROR 0x72
++/* multi-bank error status (banks 0-3) */
++#define NAND_CMD_STATUS_ERROR0 0x73
++#define NAND_CMD_STATUS_ERROR1 0x74
++#define NAND_CMD_STATUS_ERROR2 0x75
++#define NAND_CMD_STATUS_ERROR3 0x76
++#define NAND_CMD_STATUS_RESET 0x7f
++#define NAND_CMD_STATUS_CLEAR 0xff
++
++#define NAND_CMD_NONE -1
++
++/* Status bits */
++#define NAND_STATUS_FAIL 0x01
++#define NAND_STATUS_FAIL_N1 0x02
++#define NAND_STATUS_TRUE_READY 0x20
++#define NAND_STATUS_READY 0x40
++#define NAND_STATUS_WP 0x80
++
++typedef enum {
++ FL_READY,
++ FL_READING,
++ FL_WRITING,
++ FL_ERASING,
++ FL_SYNCING,
++ FL_CACHEDPRG,
++ FL_PM_SUSPENDED,
++} nand_state_t;
++
++/*************************************************************/
++
++
++
++typedef enum _ra_flags {
++ FLAG_NONE = 0,
++ FLAG_ECC_EN = (1<<0),
++ FLAG_USE_GDMA = (1<<1),
++ FLAG_VERIFY = (1<<2),
++} RA_FLAGS;
++
++
++#define BBTTAG_BITS 2
++#define BBTTAG_BITS_MASK ((1<<BBTTAG_BITS) -1)
++enum BBT_TAG {
++ BBT_TAG_UNKNOWN = 0, //2'b01
++ BBT_TAG_GOOD = 3, //2'b11
++ BBT_TAG_BAD = 2, //2'b10
++ BBT_TAG_RES = 1, //2'b01
++};
++
++struct ra_nand_chip {
++ int numchips;
++ int chip_shift;
++ int page_shift;
++ int erase_shift;
++ int oob_shift;
++ int badblockpos;
++#if !defined (__UBOOT__)
++ struct mutex hwcontrol;
++ struct mutex *controller;
++#endif
++ struct nand_ecclayout *oob;
++ int state;
++ unsigned int buffers_page;
++ char *buffers; //[CFG_PAGESIZE + CFG_PAGE_OOBSIZE];
++ char *readback_buffers;
++ unsigned char *bbt;
++#if defined (WORKAROUND_RX_BUF_OV)
++ unsigned int sandbox_page; // steal a page (block) for read ECC verification
++#endif
++
++};
++
++
++
++//fixme, gdma api
++int nand_dma_sync(void);
++void release_dma_buf(void);
++int set_gdma_ch(unsigned long dst,
++ unsigned long src, unsigned int len, int burst_size,
++ int soft_mode, int src_req_type, int dst_req_type,
++ int src_burst_mode, int dst_burst_mode);
++
++
++
++
++#endif
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0044-mtd-add-chunked-read-io-to-m25p80.patch b/target/linux/ramips/patches-3.14/0044-mtd-add-chunked-read-io-to-m25p80.patch
new file mode 100644
index 0000000000..214e660f68
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0044-mtd-add-chunked-read-io-to-m25p80.patch
@@ -0,0 +1,166 @@
+From b6d5d4c3d595b4cfb6a052ac7151fdb1d9a776ea Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 27 Jul 2014 09:58:09 +0100
+Subject: [PATCH 44/57] mtd: add chunked read io to m25p80
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/mtd/devices/m25p80.c | 128 ++++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 128 insertions(+)
+
+diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
+index ad19139..6f4290e 100644
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -556,6 +556,58 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
+ return 0;
+ }
+
++static int m25p80_read_chunked(struct mtd_info *mtd, loff_t from, size_t len,
++ size_t *retlen, u_char *buf)
++{
++ struct m25p *flash = mtd_to_m25p(mtd);
++ struct spi_transfer t[2];
++ struct spi_message m;
++ uint8_t opcode;
++ int idx = 0;
++
++ pr_debug("%s: %s from 0x%08x, len %zd\n", dev_name(&flash->spi->dev),
++ __func__, (u32)from, len);
++
++ spi_message_init(&m);
++ memset(t, 0, (sizeof t));
++
++ t[0].tx_buf = flash->command;
++ t[0].len = m25p_cmdsz(flash);
++ spi_message_add_tail(&t[0], &m);
++ spi_message_add_tail(&t[1], &m);
++
++ *retlen = 0;
++
++ while (idx < len) {
++ int rlen = (len - idx > 4) ? (4) : (len - idx);
++
++ t[1].rx_buf = &buf[idx];
++ t[1].len = rlen;
++
++ mutex_lock(&flash->lock);
++
++ /* Wait till previous write/erase is done. */
++ if (wait_till_ready(flash)) {
++ /* REVISIT status return?? */
++ mutex_unlock(&flash->lock);
++ return 1;
++ }
++
++ /* Set up the write data buffer. */
++ opcode = OPCODE_NORM_READ;
++ flash->command[0] = opcode;
++ m25p_addr2cmd(flash, from + idx, flash->command);
++
++ spi_sync(flash->spi, &m);
++
++ *retlen += m.actual_length - m25p_cmdsz(flash);
++
++ mutex_unlock(&flash->lock);
++ idx += rlen;
++ }
++ return 0;
++}
++
+ /*
+ * Write an address range to the flash chip. Data must be written in
+ * FLASH_PAGESIZE chunks. The address range may be any size provided
+@@ -643,6 +695,76 @@ static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len,
+ return 0;
+ }
+
++static int m25p80_write_chunked(struct mtd_info *mtd, loff_t to, size_t len,
++ size_t *retlen, const u_char *buf)
++{
++ struct m25p *flash = mtd_to_m25p(mtd);
++ struct spi_transfer t;
++ struct spi_message m;
++ u32 i, page_size;
++ u8 tmp[8];
++
++ pr_debug("%s: %s to 0x%08x, len %zd\n", dev_name(&flash->spi->dev),
++ __func__, (u32)to, len);
++
++ spi_message_init(&m);
++ memset(&t, 0, (sizeof t));
++
++ t.tx_buf = tmp;
++ t.len = 8;
++ spi_message_add_tail(&t, &m);
++
++ mutex_lock(&flash->lock);
++
++ /* Wait until finished previous write command. */
++ if (wait_till_ready(flash)) {
++ mutex_unlock(&flash->lock);
++ return 1;
++ }
++
++ write_enable(flash);
++
++ /* Set up the opcode in the write buffer. */
++ flash->command[0] = OPCODE_PP;
++ m25p_addr2cmd(flash, to, flash->command);
++
++ t.len = 4 + (to & 0x3);
++ if (t.len == 4)
++ t.len = 8;
++ memcpy(tmp, flash->command, 4);
++ memcpy(&tmp[4], buf, t.len - 4);
++ spi_sync(flash->spi, &m);
++ page_size = t.len - 4;
++
++ *retlen = m.actual_length - m25p_cmdsz(flash);
++
++ /* write everything in flash->page_size chunks */
++ for (i = page_size; i < len; i += page_size) {
++ page_size = len - i;
++ if (page_size > 4)
++ page_size = 4;
++
++ /* write the next page to flash */
++ m25p_addr2cmd(flash, to + i, flash->command);
++
++ memcpy(tmp, flash->command, 4);
++ memcpy(&tmp[4], buf + i, page_size);
++ t.len = 4 + page_size;
++
++ wait_till_ready(flash);
++
++ write_enable(flash);
++
++ spi_sync(flash->spi, &m);
++
++ *retlen += m.actual_length - m25p_cmdsz(flash);
++ }
++
++ mutex_unlock(&flash->lock);
++
++ return 0;
++}
++
+ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const u_char *buf)
+ {
+@@ -1252,6 +1374,12 @@ static int m25p_probe(struct spi_device *spi)
+ return -EINVAL;
+ }
+
++ if (np && of_property_read_bool(np, "m25p,chunked-io")) {
++ dev_warn(&spi->dev, "using chunked io\n");
++ flash->mtd._read = m25p80_read_chunked;
++ flash->mtd._write = m25p80_write_chunked;
++ }
++
+ flash->program_opcode = OPCODE_PP;
+
+ if (info->addr_width)
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0045-mtd-add-mt7621-nand-support.patch b/target/linux/ramips/patches-3.14/0045-mtd-add-mt7621-nand-support.patch
new file mode 100644
index 0000000000..08a0647f27
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0045-mtd-add-mt7621-nand-support.patch
@@ -0,0 +1,4455 @@
+From 5db075c5dd038fbf4b5a0196e10f4f9658236372 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 27 Jul 2014 11:05:17 +0100
+Subject: [PATCH 45/57] mtd: add mt7621 nand support
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/mtd/nand/Kconfig | 6 +
+ drivers/mtd/nand/Makefile | 1 +
+ drivers/mtd/nand/bmt.c | 750 ++++++++++++
+ drivers/mtd/nand/bmt.h | 80 ++
+ drivers/mtd/nand/dev-nand.c | 63 +
+ drivers/mtd/nand/mt6575_typedefs.h | 340 ++++++
+ drivers/mtd/nand/mtk_nand.c | 2304 +++++++++++++++++++++++++++++++++++
+ drivers/mtd/nand/mtk_nand.h | 452 +++++++
+ drivers/mtd/nand/nand_base.c | 6 +-
+ drivers/mtd/nand/nand_bbt.c | 19 +
+ drivers/mtd/nand/nand_def.h | 123 ++
+ drivers/mtd/nand/nand_device_list.h | 55 +
+ drivers/mtd/nand/partition.h | 115 ++
+ 13 files changed, 4311 insertions(+), 3 deletions(-)
+ create mode 100644 drivers/mtd/nand/bmt.c
+ create mode 100644 drivers/mtd/nand/bmt.h
+ create mode 100644 drivers/mtd/nand/dev-nand.c
+ create mode 100644 drivers/mtd/nand/mt6575_typedefs.h
+ create mode 100644 drivers/mtd/nand/mtk_nand.c
+ create mode 100644 drivers/mtd/nand/mtk_nand.h
+ create mode 100644 drivers/mtd/nand/nand_def.h
+ create mode 100644 drivers/mtd/nand/nand_device_list.h
+ create mode 100644 drivers/mtd/nand/partition.h
+
+diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
+index 90ff447..5cafa39 100644
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -510,4 +510,10 @@ config MTD_NAND_XWAY
+ Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached
+ to the External Bus Unit (EBU).
+
++config MTK_MTD_NAND
++ tristate "Support for MTK SoC NAND controller"
++ depends on SOC_MT7621
++ select MTD_NAND_IDS
++ select MTD_NAND_ECC
++
+ endif # MTD_NAND
+diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
+index 542b568..c68c96c 100644
+--- a/drivers/mtd/nand/Makefile
++++ b/drivers/mtd/nand/Makefile
+@@ -49,5 +49,6 @@ obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o
+ obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/
+ obj-$(CONFIG_MTD_NAND_XWAY) += xway_nand.o
+ obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += bcm47xxnflash/
++obj-$(CONFIG_MTK_MTD_NAND) += mtk_nand.o bmt.o
+
+ nand-objs := nand_base.o nand_bbt.o
+diff --git a/drivers/mtd/nand/bmt.c b/drivers/mtd/nand/bmt.c
+new file mode 100644
+index 0000000..0462871
+--- /dev/null
++++ b/drivers/mtd/nand/bmt.c
+@@ -0,0 +1,750 @@
++#include "bmt.h"
++
++typedef struct
++{
++ char signature[3];
++ u8 version;
++ u8 bad_count; // bad block count in pool
++ u8 mapped_count; // mapped block count in pool
++ u8 checksum;
++ u8 reseverd[13];
++} phys_bmt_header;
++
++typedef struct
++{
++ phys_bmt_header header;
++ bmt_entry table[MAX_BMT_SIZE];
++} phys_bmt_struct;
++
++typedef struct
++{
++ char signature[3];
++} bmt_oob_data;
++
++static char MAIN_SIGNATURE[] = "BMT";
++static char OOB_SIGNATURE[] = "bmt";
++#define SIGNATURE_SIZE (3)
++
++#define MAX_DAT_SIZE 0x1000
++#define MAX_OOB_SIZE 0x80
++
++static struct mtd_info *mtd_bmt;
++static struct nand_chip *nand_chip_bmt;
++#define BLOCK_SIZE_BMT (1 << nand_chip_bmt->phys_erase_shift)
++#define PAGE_SIZE_BMT (1 << nand_chip_bmt->page_shift)
++
++#define OFFSET(block) ((block) * BLOCK_SIZE_BMT)
++#define PAGE_ADDR(block) ((block) * BLOCK_SIZE_BMT / PAGE_SIZE_BMT)
++
++/*********************************************************************
++* Flash is splited into 2 parts, system part is for normal system *
++* system usage, size is system_block_count, another is replace pool *
++* +-------------------------------------------------+ *
++* | system_block_count | bmt_block_count | *
++* +-------------------------------------------------+ *
++*********************************************************************/
++static u32 total_block_count; // block number in flash
++static u32 system_block_count;
++static int bmt_block_count; // bmt table size
++// static int bmt_count; // block used in bmt
++static int page_per_block; // page per count
++
++static u32 bmt_block_index; // bmt block index
++static bmt_struct bmt; // dynamic created global bmt table
++
++static u8 dat_buf[MAX_DAT_SIZE];
++static u8 oob_buf[MAX_OOB_SIZE];
++static bool pool_erased;
++
++/***************************************************************
++*
++* Interface adaptor for preloader/uboot/kernel
++* These interfaces operate on physical address, read/write
++* physical data.
++*
++***************************************************************/
++int nand_read_page_bmt(u32 page, u8 * dat, u8 * oob)
++{
++ return mtk_nand_exec_read_page(mtd_bmt, page, PAGE_SIZE_BMT, dat, oob);
++}
++
++bool nand_block_bad_bmt(u32 offset)
++{
++ return mtk_nand_block_bad_hw(mtd_bmt, offset);
++}
++
++bool nand_erase_bmt(u32 offset)
++{
++ int status;
++ if (offset < 0x20000)
++ {
++ MSG(INIT, "erase offset: 0x%x\n", offset);
++ }
++
++ status = mtk_nand_erase_hw(mtd_bmt, offset / PAGE_SIZE_BMT); // as nand_chip structure doesn't have a erase function defined
++ if (status & NAND_STATUS_FAIL)
++ return false;
++ else
++ return true;
++}
++
++int mark_block_bad_bmt(u32 offset)
++{
++ return mtk_nand_block_markbad_hw(mtd_bmt, offset); //mark_block_bad_hw(offset);
++}
++
++bool nand_write_page_bmt(u32 page, u8 * dat, u8 * oob)
++{
++ if (mtk_nand_exec_write_page(mtd_bmt, page, PAGE_SIZE_BMT, dat, oob))
++ return false;
++ else
++ return true;
++}
++
++/***************************************************************
++* *
++* static internal function *
++* *
++***************************************************************/
++static void dump_bmt_info(bmt_struct * bmt)
++{
++ int i;
++
++ MSG(INIT, "BMT v%d. total %d mapping:\n", bmt->version, bmt->mapped_count);
++ for (i = 0; i < bmt->mapped_count; i++)
++ {
++ MSG(INIT, "\t0x%x -> 0x%x\n", bmt->table[i].bad_index, bmt->table[i].mapped_index);
++ }
++}
++
++static bool match_bmt_signature(u8 * dat, u8 * oob)
++{
++
++ if (memcmp(dat + MAIN_SIGNATURE_OFFSET, MAIN_SIGNATURE, SIGNATURE_SIZE))
++ {
++ return false;
++ }
++
++ if (memcmp(oob + OOB_SIGNATURE_OFFSET, OOB_SIGNATURE, SIGNATURE_SIZE))
++ {
++ MSG(INIT, "main signature match, oob signature doesn't match, but ignore\n");
++ }
++ return true;
++}
++
++static u8 cal_bmt_checksum(phys_bmt_struct * phys_table, int bmt_size)
++{
++ int i;
++ u8 checksum = 0;
++ u8 *dat = (u8 *) phys_table;
++
++ checksum += phys_table->header.version;
++ checksum += phys_table->header.mapped_count;
++
++ dat += sizeof(phys_bmt_header);
++ for (i = 0; i < bmt_size * sizeof(bmt_entry); i++)
++ {
++ checksum += dat[i];
++ }
++
++ return checksum;
++}
++
++
++static int is_block_mapped(int index)
++{
++ int i;
++ for (i = 0; i < bmt.mapped_count; i++)
++ {
++ if (index == bmt.table[i].mapped_index)
++ return i;
++ }
++ return -1;
++}
++
++static bool is_page_used(u8 * dat, u8 * oob)
++{
++ return ((oob[OOB_INDEX_OFFSET] != 0xFF) || (oob[OOB_INDEX_OFFSET + 1] != 0xFF));
++}
++
++static bool valid_bmt_data(phys_bmt_struct * phys_table)
++{
++ int i;
++ u8 checksum = cal_bmt_checksum(phys_table, bmt_block_count);
++
++ // checksum correct?
++ if (phys_table->header.checksum != checksum)
++ {
++ MSG(INIT, "BMT Data checksum error: %x %x\n", phys_table->header.checksum, checksum);
++ return false;
++ }
++
++ MSG(INIT, "BMT Checksum is: 0x%x\n", phys_table->header.checksum);
++
++ // block index correct?
++ for (i = 0; i < phys_table->header.mapped_count; i++)
++ {
++ if (phys_table->table[i].bad_index >= total_block_count || phys_table->table[i].mapped_index >= total_block_count || phys_table->table[i].mapped_index < system_block_count)
++ {
++ MSG(INIT, "index error: bad_index: %d, mapped_index: %d\n", phys_table->table[i].bad_index, phys_table->table[i].mapped_index);
++ return false;
++ }
++ }
++
++ // pass check, valid bmt.
++ MSG(INIT, "Valid BMT, version v%d\n", phys_table->header.version);
++ return true;
++}
++
++static void fill_nand_bmt_buffer(bmt_struct * bmt, u8 * dat, u8 * oob)
++{
++ phys_bmt_struct phys_bmt;
++
++ dump_bmt_info(bmt);
++
++ // fill phys_bmt_struct structure with bmt_struct
++ memset(&phys_bmt, 0xFF, sizeof(phys_bmt));
++
++ memcpy(phys_bmt.header.signature, MAIN_SIGNATURE, SIGNATURE_SIZE);
++ phys_bmt.header.version = BMT_VERSION;
++ // phys_bmt.header.bad_count = bmt->bad_count;
++ phys_bmt.header.mapped_count = bmt->mapped_count;
++ memcpy(phys_bmt.table, bmt->table, sizeof(bmt_entry) * bmt_block_count);
++
++ phys_bmt.header.checksum = cal_bmt_checksum(&phys_bmt, bmt_block_count);
++
++ memcpy(dat + MAIN_SIGNATURE_OFFSET, &phys_bmt, sizeof(phys_bmt));
++ memcpy(oob + OOB_SIGNATURE_OFFSET, OOB_SIGNATURE, SIGNATURE_SIZE);
++}
++
++// return valid index if found BMT, else return 0
++static int load_bmt_data(int start, int pool_size)
++{
++ int bmt_index = start + pool_size - 1; // find from the end
++ phys_bmt_struct phys_table;
++ int i;
++
++ MSG(INIT, "[%s]: begin to search BMT from block 0x%x\n", __FUNCTION__, bmt_index);
++
++ for (bmt_index = start + pool_size - 1; bmt_index >= start; bmt_index--)
++ {
++ if (nand_block_bad_bmt(OFFSET(bmt_index)))
++ {
++ MSG(INIT, "Skip bad block: %d\n", bmt_index);
++ continue;
++ }
++
++ if (!nand_read_page_bmt(PAGE_ADDR(bmt_index), dat_buf, oob_buf))
++ {
++ MSG(INIT, "Error found when read block %d\n", bmt_index);
++ continue;
++ }
++
++ if (!match_bmt_signature(dat_buf, oob_buf))
++ {
++ continue;
++ }
++
++ MSG(INIT, "Match bmt signature @ block: 0x%x\n", bmt_index);
++
++ memcpy(&phys_table, dat_buf + MAIN_SIGNATURE_OFFSET, sizeof(phys_table));
++
++ if (!valid_bmt_data(&phys_table))
++ {
++ MSG(INIT, "BMT data is not correct %d\n", bmt_index);
++ continue;
++ } else
++ {
++ bmt.mapped_count = phys_table.header.mapped_count;
++ bmt.version = phys_table.header.version;
++ // bmt.bad_count = phys_table.header.bad_count;
++ memcpy(bmt.table, phys_table.table, bmt.mapped_count * sizeof(bmt_entry));
++
++ MSG(INIT, "bmt found at block: %d, mapped block: %d\n", bmt_index, bmt.mapped_count);
++
++ for (i = 0; i < bmt.mapped_count; i++)
++ {
++ if (!nand_block_bad_bmt(OFFSET(bmt.table[i].bad_index)))
++ {
++ MSG(INIT, "block 0x%x is not mark bad, should be power lost last time\n", bmt.table[i].bad_index);
++ mark_block_bad_bmt(OFFSET(bmt.table[i].bad_index));
++ }
++ }
++
++ return bmt_index;
++ }
++ }
++
++ MSG(INIT, "bmt block not found!\n");
++ return 0;
++}
++
++/*************************************************************************
++* Find an available block and erase. *
++* start_from_end: if true, find available block from end of flash. *
++* else, find from the beginning of the pool *
++* need_erase: if true, all unmapped blocks in the pool will be erased *
++*************************************************************************/
++static int find_available_block(bool start_from_end)
++{
++ int i; // , j;
++ int block = system_block_count;
++ int direction;
++ // int avail_index = 0;
++ MSG(INIT, "Try to find_available_block, pool_erase: %d\n", pool_erased);
++
++ // erase all un-mapped blocks in pool when finding avaliable block
++ if (!pool_erased)
++ {
++ MSG(INIT, "Erase all un-mapped blocks in pool\n");
++ for (i = 0; i < bmt_block_count; i++)
++ {
++ if (block == bmt_block_index)
++ {
++ MSG(INIT, "Skip bmt block 0x%x\n", block);
++ continue;
++ }
++
++ if (nand_block_bad_bmt(OFFSET(block + i)))
++ {
++ MSG(INIT, "Skip bad block 0x%x\n", block + i);
++ continue;
++ }
++//if(block==4095)
++//{
++// continue;
++//}
++
++ if (is_block_mapped(block + i) >= 0)
++ {
++ MSG(INIT, "Skip mapped block 0x%x\n", block + i);
++ continue;
++ }
++
++ if (!nand_erase_bmt(OFFSET(block + i)))
++ {
++ MSG(INIT, "Erase block 0x%x failed\n", block + i);
++ mark_block_bad_bmt(OFFSET(block + i));
++ }
++ }
++
++ pool_erased = 1;
++ }
++
++ if (start_from_end)
++ {
++ block = total_block_count - 1;
++ direction = -1;
++ } else
++ {
++ block = system_block_count;
++ direction = 1;
++ }
++
++ for (i = 0; i < bmt_block_count; i++, block += direction)
++ {
++ if (block == bmt_block_index)
++ {
++ MSG(INIT, "Skip bmt block 0x%x\n", block);
++ continue;
++ }
++
++ if (nand_block_bad_bmt(OFFSET(block)))
++ {
++ MSG(INIT, "Skip bad block 0x%x\n", block);
++ continue;
++ }
++
++ if (is_block_mapped(block) >= 0)
++ {
++ MSG(INIT, "Skip mapped block 0x%x\n", block);
++ continue;
++ }
++
++ MSG(INIT, "Find block 0x%x available\n", block);
++ return block;
++ }
++
++ return 0;
++}
++
++static unsigned short get_bad_index_from_oob(u8 * oob_buf)
++{
++ unsigned short index;
++ memcpy(&index, oob_buf + OOB_INDEX_OFFSET, OOB_INDEX_SIZE);
++
++ return index;
++}
++
++void set_bad_index_to_oob(u8 * oob, u16 index)
++{
++ memcpy(oob + OOB_INDEX_OFFSET, &index, sizeof(index));
++}
++
++static int migrate_from_bad(int offset, u8 * write_dat, u8 * write_oob)
++{
++ int page;
++ int error_block = offset / BLOCK_SIZE_BMT;
++ int error_page = (offset / PAGE_SIZE_BMT) % page_per_block;
++ int to_index;
++
++ memcpy(oob_buf, write_oob, MAX_OOB_SIZE);
++
++ to_index = find_available_block(false);
++
++ if (!to_index)
++ {
++ MSG(INIT, "Cannot find an available block for BMT\n");
++ return 0;
++ }
++
++ { // migrate error page first
++ MSG(INIT, "Write error page: 0x%x\n", error_page);
++ if (!write_dat)
++ {
++ nand_read_page_bmt(PAGE_ADDR(error_block) + error_page, dat_buf, NULL);
++ write_dat = dat_buf;
++ }
++ // memcpy(oob_buf, write_oob, MAX_OOB_SIZE);
++
++ if (error_block < system_block_count)
++ set_bad_index_to_oob(oob_buf, error_block); // if error_block is already a mapped block, original mapping index is in OOB.
++
++ if (!nand_write_page_bmt(PAGE_ADDR(to_index) + error_page, write_dat, oob_buf))
++ {
++ MSG(INIT, "Write to page 0x%x fail\n", PAGE_ADDR(to_index) + error_page);
++ mark_block_bad_bmt(to_index);
++ return migrate_from_bad(offset, write_dat, write_oob);
++ }
++ }
++
++ for (page = 0; page < page_per_block; page++)
++ {
++ if (page != error_page)
++ {
++ nand_read_page_bmt(PAGE_ADDR(error_block) + page, dat_buf, oob_buf);
++ if (is_page_used(dat_buf, oob_buf))
++ {
++ if (error_block < system_block_count)
++ {
++ set_bad_index_to_oob(oob_buf, error_block);
++ }
++ MSG(INIT, "\tmigrate page 0x%x to page 0x%x\n", PAGE_ADDR(error_block) + page, PAGE_ADDR(to_index) + page);
++ if (!nand_write_page_bmt(PAGE_ADDR(to_index) + page, dat_buf, oob_buf))
++ {
++ MSG(INIT, "Write to page 0x%x fail\n", PAGE_ADDR(to_index) + page);
++ mark_block_bad_bmt(to_index);
++ return migrate_from_bad(offset, write_dat, write_oob);
++ }
++ }
++ }
++ }
++
++ MSG(INIT, "Migrate from 0x%x to 0x%x done!\n", error_block, to_index);
++
++ return to_index;
++}
++
++static bool write_bmt_to_flash(u8 * dat, u8 * oob)
++{
++ bool need_erase = true;
++ MSG(INIT, "Try to write BMT\n");
++
++ if (bmt_block_index == 0)
++ {
++ // if we don't have index, we don't need to erase found block as it has been erased in find_available_block()
++ need_erase = false;
++ if (!(bmt_block_index = find_available_block(true)))
++ {
++ MSG(INIT, "Cannot find an available block for BMT\n");
++ return false;
++ }
++ }
++
++ MSG(INIT, "Find BMT block: 0x%x\n", bmt_block_index);
++
++ // write bmt to flash
++ if (need_erase)
++ {
++ if (!nand_erase_bmt(OFFSET(bmt_block_index)))
++ {
++ MSG(INIT, "BMT block erase fail, mark bad: 0x%x\n", bmt_block_index);
++ mark_block_bad_bmt(OFFSET(bmt_block_index));
++ // bmt.bad_count++;
++
++ bmt_block_index = 0;
++ return write_bmt_to_flash(dat, oob); // recursive call
++ }
++ }
++
++ if (!nand_write_page_bmt(PAGE_ADDR(bmt_block_index), dat, oob))
++ {
++ MSG(INIT, "Write BMT data fail, need to write again\n");
++ mark_block_bad_bmt(OFFSET(bmt_block_index));
++ // bmt.bad_count++;
++
++ bmt_block_index = 0;
++ return write_bmt_to_flash(dat, oob); // recursive call
++ }
++
++ MSG(INIT, "Write BMT data to block 0x%x success\n", bmt_block_index);
++ return true;
++}
++
++/*******************************************************************
++* Reconstruct bmt, called when found bmt info doesn't match bad
++* block info in flash.
++*
++* Return NULL for failure
++*******************************************************************/
++bmt_struct *reconstruct_bmt(bmt_struct * bmt)
++{
++ int i;
++ int index = system_block_count;
++ unsigned short bad_index;
++ int mapped;
++
++ // init everything in BMT struct
++ bmt->version = BMT_VERSION;
++ bmt->bad_count = 0;
++ bmt->mapped_count = 0;
++
++ memset(bmt->table, 0, bmt_block_count * sizeof(bmt_entry));
++
++ for (i = 0; i < bmt_block_count; i++, index++)
++ {
++ if (nand_block_bad_bmt(OFFSET(index)))
++ {
++ MSG(INIT, "Skip bad block: 0x%x\n", index);
++ // bmt->bad_count++;
++ continue;
++ }
++
++ MSG(INIT, "read page: 0x%x\n", PAGE_ADDR(index));
++ nand_read_page_bmt(PAGE_ADDR(index), dat_buf, oob_buf);
++ /* if (mtk_nand_read_page_hw(PAGE_ADDR(index), dat_buf))
++ {
++ MSG(INIT, "Error when read block %d\n", bmt_block_index);
++ continue;
++ } */
++
++ if ((bad_index = get_bad_index_from_oob(oob_buf)) >= system_block_count)
++ {
++ MSG(INIT, "get bad index: 0x%x\n", bad_index);
++ if (bad_index != 0xFFFF)
++ MSG(INIT, "Invalid bad index found in block 0x%x, bad index 0x%x\n", index, bad_index);
++ continue;
++ }
++
++ MSG(INIT, "Block 0x%x is mapped to bad block: 0x%x\n", index, bad_index);
++
++ if (!nand_block_bad_bmt(OFFSET(bad_index)))
++ {
++ MSG(INIT, "\tbut block 0x%x is not marked as bad, invalid mapping\n", bad_index);
++ continue; // no need to erase here, it will be erased later when trying to write BMT
++ }
++
++ if ((mapped = is_block_mapped(bad_index)) >= 0)
++ {
++ MSG(INIT, "bad block 0x%x is mapped to 0x%x, should be caused by power lost, replace with one\n", bmt->table[mapped].bad_index, bmt->table[mapped].mapped_index);
++ bmt->table[mapped].mapped_index = index; // use new one instead.
++ } else
++ {
++ // add mapping to BMT
++ bmt->table[bmt->mapped_count].bad_index = bad_index;
++ bmt->table[bmt->mapped_count].mapped_index = index;
++ bmt->mapped_count++;
++ }
++
++ MSG(INIT, "Add mapping: 0x%x -> 0x%x to BMT\n", bad_index, index);
++
++ }
++
++ MSG(INIT, "Scan replace pool done, mapped block: %d\n", bmt->mapped_count);
++ // dump_bmt_info(bmt);
++
++ // fill NAND BMT buffer
++ memset(oob_buf, 0xFF, sizeof(oob_buf));
++ fill_nand_bmt_buffer(bmt, dat_buf, oob_buf);
++
++ // write BMT back
++ if (!write_bmt_to_flash(dat_buf, oob_buf))
++ {
++ MSG(INIT, "TRAGEDY: cannot find a place to write BMT!!!!\n");
++ }
++
++ return bmt;
++}
++
++/*******************************************************************
++* [BMT Interface]
++*
++* Description:
++* Init bmt from nand. Reconstruct if not found or data error
++*
++* Parameter:
++* size: size of bmt and replace pool
++*
++* Return:
++* NULL for failure, and a bmt struct for success
++*******************************************************************/
++bmt_struct *init_bmt(struct nand_chip * chip, int size)
++{
++ struct mtk_nand_host *host;
++
++ if (size > 0 && size < MAX_BMT_SIZE)
++ {
++ MSG(INIT, "Init bmt table, size: %d\n", size);
++ bmt_block_count = size;
++ } else
++ {
++ MSG(INIT, "Invalid bmt table size: %d\n", size);
++ return NULL;
++ }
++ nand_chip_bmt = chip;
++ system_block_count = chip->chipsize >> chip->phys_erase_shift;
++ total_block_count = bmt_block_count + system_block_count;
++ page_per_block = BLOCK_SIZE_BMT / PAGE_SIZE_BMT;
++ host = (struct mtk_nand_host *)chip->priv;
++ mtd_bmt = &host->mtd;
++
++ MSG(INIT, "mtd_bmt: %p, nand_chip_bmt: %p\n", mtd_bmt, nand_chip_bmt);
++ MSG(INIT, "bmt count: %d, system count: %d\n", bmt_block_count, system_block_count);
++
++ // set this flag, and unmapped block in pool will be erased.
++ pool_erased = 0;
++ memset(bmt.table, 0, size * sizeof(bmt_entry));
++ if ((bmt_block_index = load_bmt_data(system_block_count, size)))
++ {
++ MSG(INIT, "Load bmt data success @ block 0x%x\n", bmt_block_index);
++ dump_bmt_info(&bmt);
++ return &bmt;
++ } else
++ {
++ MSG(INIT, "Load bmt data fail, need re-construct!\n");
++#ifndef __UBOOT_NAND__ // BMT is not re-constructed in UBOOT.
++ if (reconstruct_bmt(&bmt))
++ return &bmt;
++ else
++#endif
++ return NULL;
++ }
++}
++
++/*******************************************************************
++* [BMT Interface]
++*
++* Description:
++* Update BMT.
++*
++* Parameter:
++* offset: update block/page offset.
++* reason: update reason, see update_reason_t for reason.
++* dat/oob: data and oob buffer for write fail.
++*
++* Return:
++* Return true for success, and false for failure.
++*******************************************************************/
++bool update_bmt(u32 offset, update_reason_t reason, u8 * dat, u8 * oob)
++{
++ int map_index;
++ int orig_bad_block = -1;
++ // int bmt_update_index;
++ int i;
++ int bad_index = offset / BLOCK_SIZE_BMT;
++
++#ifndef MTK_NAND_BMT
++ return false;
++#endif
++ if (reason == UPDATE_WRITE_FAIL)
++ {
++ MSG(INIT, "Write fail, need to migrate\n");
++ if (!(map_index = migrate_from_bad(offset, dat, oob)))
++ {
++ MSG(INIT, "migrate fail\n");
++ return false;
++ }
++ } else
++ {
++ if (!(map_index = find_available_block(false)))
++ {
++ MSG(INIT, "Cannot find block in pool\n");
++ return false;
++ }
++ }
++
++ // now let's update BMT
++ if (bad_index >= system_block_count) // mapped block become bad, find original bad block
++ {
++ for (i = 0; i < bmt_block_count; i++)
++ {
++ if (bmt.table[i].mapped_index == bad_index)
++ {
++ orig_bad_block = bmt.table[i].bad_index;
++ break;
++ }
++ }
++ // bmt.bad_count++;
++ MSG(INIT, "Mapped block becomes bad, orig bad block is 0x%x\n", orig_bad_block);
++
++ bmt.table[i].mapped_index = map_index;
++ } else
++ {
++ bmt.table[bmt.mapped_count].mapped_index = map_index;
++ bmt.table[bmt.mapped_count].bad_index = bad_index;
++ bmt.mapped_count++;
++ }
++
++ memset(oob_buf, 0xFF, sizeof(oob_buf));
++ fill_nand_bmt_buffer(&bmt, dat_buf, oob_buf);
++ if (!write_bmt_to_flash(dat_buf, oob_buf))
++ return false;
++
++ mark_block_bad_bmt(offset);
++
++ return true;
++}
++
++/*******************************************************************
++* [BMT Interface]
++*
++* Description:
++* Given an block index, return mapped index if it's mapped, else
++* return given index.
++*
++* Parameter:
++* index: given an block index. This value cannot exceed
++* system_block_count.
++*
++* Return NULL for failure
++*******************************************************************/
++u16 get_mapping_block_index(int index)
++{
++ int i;
++#ifndef MTK_NAND_BMT
++ return index;
++#endif
++ if (index > system_block_count)
++ {
++ return index;
++ }
++
++ for (i = 0; i < bmt.mapped_count; i++)
++ {
++ if (bmt.table[i].bad_index == index)
++ {
++ return bmt.table[i].mapped_index;
++ }
++ }
++
++ return index;
++}
++#ifdef __KERNEL_NAND__
++EXPORT_SYMBOL_GPL(init_bmt);
++EXPORT_SYMBOL_GPL(update_bmt);
++EXPORT_SYMBOL_GPL(get_mapping_block_index);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("MediaTek");
++MODULE_DESCRIPTION("Bad Block mapping management for MediaTek NAND Flash Driver");
++#endif
+diff --git a/drivers/mtd/nand/bmt.h b/drivers/mtd/nand/bmt.h
+new file mode 100644
+index 0000000..2d30ea9
+--- /dev/null
++++ b/drivers/mtd/nand/bmt.h
+@@ -0,0 +1,80 @@
++#ifndef __BMT_H__
++#define __BMT_H__
++
++#include "nand_def.h"
++
++#if defined(__PRELOADER_NAND__)
++
++#include "nand.h"
++
++#elif defined(__UBOOT_NAND__)
++
++#include <linux/mtd/nand.h>
++#include "mtk_nand.h"
++
++#elif defined(__KERNEL_NAND__)
++
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/nand.h>
++#include <linux/module.h>
++#include "mtk_nand.h"
++
++#endif
++
++
++#define MAX_BMT_SIZE (0x80)
++#define BMT_VERSION (1) // initial version
++
++#define MAIN_SIGNATURE_OFFSET (0)
++#define OOB_SIGNATURE_OFFSET (1)
++#define OOB_INDEX_OFFSET (29)
++#define OOB_INDEX_SIZE (2)
++#define FAKE_INDEX (0xAAAA)
++
++typedef struct _bmt_entry_
++{
++ u16 bad_index; // bad block index
++ u16 mapped_index; // mapping block index in the replace pool
++} bmt_entry;
++
++typedef enum
++{
++ UPDATE_ERASE_FAIL,
++ UPDATE_WRITE_FAIL,
++ UPDATE_UNMAPPED_BLOCK,
++ UPDATE_REASON_COUNT,
++} update_reason_t;
++
++typedef struct
++{
++ bmt_entry table[MAX_BMT_SIZE];
++ u8 version;
++ u8 mapped_count; // mapped block count in pool
++ u8 bad_count; // bad block count in pool. Not used in V1
++} bmt_struct;
++
++/***************************************************************
++* *
++* Interface BMT need to use *
++* *
++***************************************************************/
++extern bool mtk_nand_exec_read_page(struct mtd_info *mtd, u32 row, u32 page_size, u8 * dat, u8 * oob);
++extern int mtk_nand_block_bad_hw(struct mtd_info *mtd, loff_t ofs);
++extern int mtk_nand_erase_hw(struct mtd_info *mtd, int page);
++extern int mtk_nand_block_markbad_hw(struct mtd_info *mtd, loff_t ofs);
++extern int mtk_nand_exec_write_page(struct mtd_info *mtd, u32 row, u32 page_size, u8 * dat, u8 * oob);
++
++
++/***************************************************************
++* *
++* Different function interface for preloader/uboot/kernel *
++* *
++***************************************************************/
++void set_bad_index_to_oob(u8 * oob, u16 index);
++
++
++bmt_struct *init_bmt(struct nand_chip *nand, int size);
++bool update_bmt(u32 offset, update_reason_t reason, u8 * dat, u8 * oob);
++unsigned short get_mapping_block_index(int index);
++
++#endif // #ifndef __BMT_H__
+diff --git a/drivers/mtd/nand/dev-nand.c b/drivers/mtd/nand/dev-nand.c
+new file mode 100644
+index 0000000..9fb5235
+--- /dev/null
++++ b/drivers/mtd/nand/dev-nand.c
+@@ -0,0 +1,63 @@
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++
++#include "mt6575_typedefs.h"
++
++#define RALINK_NAND_CTRL_BASE 0xBE003000
++#define NFI_base RALINK_NAND_CTRL_BASE
++#define RALINK_NANDECC_CTRL_BASE 0xBE003800
++#define NFIECC_base RALINK_NANDECC_CTRL_BASE
++#define MT7621_NFI_IRQ_ID SURFBOARDINT_NAND
++#define MT7621_NFIECC_IRQ_ID SURFBOARDINT_NAND_ECC
++
++#define SURFBOARDINT_NAND 22
++#define SURFBOARDINT_NAND_ECC 23
++
++static struct resource MT7621_resource_nand[] = {
++ {
++ .start = NFI_base,
++ .end = NFI_base + 0x1A0,
++ .flags = IORESOURCE_MEM,
++ },
++ {
++ .start = NFIECC_base,
++ .end = NFIECC_base + 0x150,
++ .flags = IORESOURCE_MEM,
++ },
++ {
++ .start = MT7621_NFI_IRQ_ID,
++ .flags = IORESOURCE_IRQ,
++ },
++ {
++ .start = MT7621_NFIECC_IRQ_ID,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device MT7621_nand_dev = {
++ .name = "MT7621-NAND",
++ .id = 0,
++ .num_resources = ARRAY_SIZE(MT7621_resource_nand),
++ .resource = MT7621_resource_nand,
++ .dev = {
++ .platform_data = &mt7621_nand_hw,
++ },
++};
++
++
++int __init mtk_nand_register(void)
++{
++
++ int retval = 0;
++
++ retval = platform_device_register(&MT7621_nand_dev);
++ if (retval != 0) {
++ printk(KERN_ERR "register nand device fail\n");
++ return retval;
++ }
++
++
++ return retval;
++}
++arch_initcall(mtk_nand_register);
+diff --git a/drivers/mtd/nand/mt6575_typedefs.h b/drivers/mtd/nand/mt6575_typedefs.h
+new file mode 100644
+index 0000000..a7b9647
+--- /dev/null
++++ b/drivers/mtd/nand/mt6575_typedefs.h
+@@ -0,0 +1,340 @@
++/* Copyright Statement:
++ *
++ * This software/firmware and related documentation ("MediaTek Software") are
++ * protected under relevant copyright laws. The information contained herein
++ * is confidential and proprietary to MediaTek Inc. and/or its licensors.
++ * Without the prior written permission of MediaTek inc. and/or its licensors,
++ * any reproduction, modification, use or disclosure of MediaTek Software,
++ * and information contained herein, in whole or in part, shall be strictly prohibited.
++ */
++/* MediaTek Inc. (C) 2010. All rights reserved.
++ *
++ * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
++ * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
++ * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON
++ * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
++ * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
++ * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
++ * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH
++ * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES
++ * THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES
++ * CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK
++ * SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
++ * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND
++ * CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
++ * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
++ * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO
++ * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
++ *
++ * The following software/firmware and/or related documentation ("MediaTek Software")
++ * have been modified by MediaTek Inc. All revisions are subject to any receiver's
++ * applicable license agreements with MediaTek Inc.
++ */
++
++/*****************************************************************************
++* Copyright Statement:
++* --------------------
++* This software is protected by Copyright and the information contained
++* herein is confidential. The software may not be copied and the information
++* contained herein may not be used or disclosed except with the written
++* permission of MediaTek Inc. (C) 2008
++*
++* BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
++* THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
++* RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON
++* AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
++* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
++* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
++* NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
++* SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
++* SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH
++* THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO
++* NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S
++* SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM.
++*
++* BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE
++* LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
++* AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
++* OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO
++* MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
++*
++* THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE
++* WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF
++* LAWS PRINCIPLES. ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND
++* RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER
++* THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC).
++*
++*****************************************************************************/
++
++#ifndef _MT6575_TYPEDEFS_H
++#define _MT6575_TYPEDEFS_H
++
++#if defined (__KERNEL_NAND__)
++#include <linux/bug.h>
++#else
++#define true 1
++#define false 0
++#define bool u8
++#endif
++
++// ---------------------------------------------------------------------------
++// Basic Type Definitions
++// ---------------------------------------------------------------------------
++
++typedef volatile unsigned char *P_kal_uint8;
++typedef volatile unsigned short *P_kal_uint16;
++typedef volatile unsigned int *P_kal_uint32;
++
++typedef long LONG;
++typedef unsigned char UBYTE;
++typedef short SHORT;
++
++typedef signed char kal_int8;
++typedef signed short kal_int16;
++typedef signed int kal_int32;
++typedef long long kal_int64;
++typedef unsigned char kal_uint8;
++typedef unsigned short kal_uint16;
++typedef unsigned int kal_uint32;
++typedef unsigned long long kal_uint64;
++typedef char kal_char;
++
++typedef unsigned int *UINT32P;
++typedef volatile unsigned short *UINT16P;
++typedef volatile unsigned char *UINT8P;
++typedef unsigned char *U8P;
++
++typedef volatile unsigned char *P_U8;
++typedef volatile signed char *P_S8;
++typedef volatile unsigned short *P_U16;
++typedef volatile signed short *P_S16;
++typedef volatile unsigned int *P_U32;
++typedef volatile signed int *P_S32;
++typedef unsigned long long *P_U64;
++typedef signed long long *P_S64;
++
++typedef unsigned char U8;
++typedef signed char S8;
++typedef unsigned short U16;
++typedef signed short S16;
++typedef unsigned int U32;
++typedef signed int S32;
++typedef unsigned long long U64;
++typedef signed long long S64;
++//typedef unsigned char bool;
++
++typedef unsigned char UINT8;
++typedef unsigned short UINT16;
++typedef unsigned int UINT32;
++typedef unsigned short USHORT;
++typedef signed char INT8;
++typedef signed short INT16;
++typedef signed int INT32;
++typedef unsigned int DWORD;
++typedef void VOID;
++typedef unsigned char BYTE;
++typedef float FLOAT;
++
++typedef char *LPCSTR;
++typedef short *LPWSTR;
++
++
++// ---------------------------------------------------------------------------
++// Constants
++// ---------------------------------------------------------------------------
++
++#define IMPORT EXTERN
++#ifndef __cplusplus
++ #define EXTERN extern
++#else
++ #define EXTERN extern "C"
++#endif
++#define LOCAL static
++#define GLOBAL
++#define EXPORT GLOBAL
++
++#define EQ ==
++#define NEQ !=
++#define AND &&
++#define OR ||
++#define XOR(A,B) ((!(A) AND (B)) OR ((A) AND !(B)))
++
++#ifndef FALSE
++ #define FALSE (0)
++#endif
++
++#ifndef TRUE
++ #define TRUE (1)
++#endif
++
++#ifndef NULL
++ #define NULL (0)
++#endif
++
++//enum boolean {false, true};
++enum {RX, TX, NONE};
++
++#ifndef BOOL
++typedef unsigned char BOOL;
++#endif
++
++typedef enum {
++ KAL_FALSE = 0,
++ KAL_TRUE = 1,
++} kal_bool;
++
++
++// ---------------------------------------------------------------------------
++// Type Casting
++// ---------------------------------------------------------------------------
++
++#define AS_INT32(x) (*(INT32 *)((void*)x))
++#define AS_INT16(x) (*(INT16 *)((void*)x))
++#define AS_INT8(x) (*(INT8 *)((void*)x))
++
++#define AS_UINT32(x) (*(UINT32 *)((void*)x))
++#define AS_UINT16(x) (*(UINT16 *)((void*)x))
++#define AS_UINT8(x) (*(UINT8 *)((void*)x))
++
++
++// ---------------------------------------------------------------------------
++// Register Manipulations
++// ---------------------------------------------------------------------------
++
++#define READ_REGISTER_UINT32(reg) \
++ (*(volatile UINT32 * const)(reg))
++
++#define WRITE_REGISTER_UINT32(reg, val) \
++ (*(volatile UINT32 * const)(reg)) = (val)
++
++#define READ_REGISTER_UINT16(reg) \
++ (*(volatile UINT16 * const)(reg))
++
++#define WRITE_REGISTER_UINT16(reg, val) \
++ (*(volatile UINT16 * const)(reg)) = (val)
++
++#define READ_REGISTER_UINT8(reg) \
++ (*(volatile UINT8 * const)(reg))
++
++#define WRITE_REGISTER_UINT8(reg, val) \
++ (*(volatile UINT8 * const)(reg)) = (val)
++
++#define INREG8(x) READ_REGISTER_UINT8((UINT8*)((void*)(x)))
++#define OUTREG8(x, y) WRITE_REGISTER_UINT8((UINT8*)((void*)(x)), (UINT8)(y))
++#define SETREG8(x, y) OUTREG8(x, INREG8(x)|(y))
++#define CLRREG8(x, y) OUTREG8(x, INREG8(x)&~(y))
++#define MASKREG8(x, y, z) OUTREG8(x, (INREG8(x)&~(y))|(z))
++
++#define INREG16(x) READ_REGISTER_UINT16((UINT16*)((void*)(x)))
++#define OUTREG16(x, y) WRITE_REGISTER_UINT16((UINT16*)((void*)(x)),(UINT16)(y))
++#define SETREG16(x, y) OUTREG16(x, INREG16(x)|(y))
++#define CLRREG16(x, y) OUTREG16(x, INREG16(x)&~(y))
++#define MASKREG16(x, y, z) OUTREG16(x, (INREG16(x)&~(y))|(z))
++
++#define INREG32(x) READ_REGISTER_UINT32((UINT32*)((void*)(x)))
++#define OUTREG32(x, y) WRITE_REGISTER_UINT32((UINT32*)((void*)(x)), (UINT32)(y))
++#define SETREG32(x, y) OUTREG32(x, INREG32(x)|(y))
++#define CLRREG32(x, y) OUTREG32(x, INREG32(x)&~(y))
++#define MASKREG32(x, y, z) OUTREG32(x, (INREG32(x)&~(y))|(z))
++
++
++#define DRV_Reg8(addr) INREG8(addr)
++#define DRV_WriteReg8(addr, data) OUTREG8(addr, data)
++#define DRV_SetReg8(addr, data) SETREG8(addr, data)
++#define DRV_ClrReg8(addr, data) CLRREG8(addr, data)
++
++#define DRV_Reg16(addr) INREG16(addr)
++#define DRV_WriteReg16(addr, data) OUTREG16(addr, data)
++#define DRV_SetReg16(addr, data) SETREG16(addr, data)
++#define DRV_ClrReg16(addr, data) CLRREG16(addr, data)
++
++#define DRV_Reg32(addr) INREG32(addr)
++#define DRV_WriteReg32(addr, data) OUTREG32(addr, data)
++#define DRV_SetReg32(addr, data) SETREG32(addr, data)
++#define DRV_ClrReg32(addr, data) CLRREG32(addr, data)
++
++// !!! DEPRECATED, WILL BE REMOVED LATER !!!
++#define DRV_Reg(addr) DRV_Reg16(addr)
++#define DRV_WriteReg(addr, data) DRV_WriteReg16(addr, data)
++#define DRV_SetReg(addr, data) DRV_SetReg16(addr, data)
++#define DRV_ClrReg(addr, data) DRV_ClrReg16(addr, data)
++
++
++// ---------------------------------------------------------------------------
++// Compiler Time Deduction Macros
++// ---------------------------------------------------------------------------
++
++#define _MASK_OFFSET_1(x, n) ((x) & 0x1) ? (n) :
++#define _MASK_OFFSET_2(x, n) _MASK_OFFSET_1((x), (n)) _MASK_OFFSET_1((x) >> 1, (n) + 1)
++#define _MASK_OFFSET_4(x, n) _MASK_OFFSET_2((x), (n)) _MASK_OFFSET_2((x) >> 2, (n) + 2)
++#define _MASK_OFFSET_8(x, n) _MASK_OFFSET_4((x), (n)) _MASK_OFFSET_4((x) >> 4, (n) + 4)
++#define _MASK_OFFSET_16(x, n) _MASK_OFFSET_8((x), (n)) _MASK_OFFSET_8((x) >> 8, (n) + 8)
++#define _MASK_OFFSET_32(x, n) _MASK_OFFSET_16((x), (n)) _MASK_OFFSET_16((x) >> 16, (n) + 16)
++
++#define MASK_OFFSET_ERROR (0xFFFFFFFF)
++
++#define MASK_OFFSET(x) (_MASK_OFFSET_32(x, 0) MASK_OFFSET_ERROR)
++
++
++// ---------------------------------------------------------------------------
++// Assertions
++// ---------------------------------------------------------------------------
++
++#ifndef ASSERT
++ #define ASSERT(expr) BUG_ON(!(expr))
++#endif
++
++#ifndef NOT_IMPLEMENTED
++ #define NOT_IMPLEMENTED() BUG_ON(1)
++#endif
++
++#define STATIC_ASSERT(pred) STATIC_ASSERT_X(pred, __LINE__)
++#define STATIC_ASSERT_X(pred, line) STATIC_ASSERT_XX(pred, line)
++#define STATIC_ASSERT_XX(pred, line) \
++ extern char assertion_failed_at_##line[(pred) ? 1 : -1]
++
++// ---------------------------------------------------------------------------
++// Resolve Compiler Warnings
++// ---------------------------------------------------------------------------
++
++#define NOT_REFERENCED(x) { (x) = (x); }
++
++
++// ---------------------------------------------------------------------------
++// Utilities
++// ---------------------------------------------------------------------------
++
++#define MAXIMUM(A,B) (((A)>(B))?(A):(B))
++#define MINIMUM(A,B) (((A)<(B))?(A):(B))
++
++#define ARY_SIZE(x) (sizeof((x)) / sizeof((x[0])))
++#define DVT_DELAYMACRO(u4Num) \
++{ \
++ UINT32 u4Count = 0 ; \
++ for (u4Count = 0; u4Count < u4Num; u4Count++ ); \
++} \
++
++#define A68351B 0
++#define B68351B 1
++#define B68351D 2
++#define B68351E 3
++#define UNKNOWN_IC_VERSION 0xFF
++
++/* NAND driver */
++struct mtk_nand_host_hw {
++ unsigned int nfi_bus_width; /* NFI_BUS_WIDTH */
++ unsigned int nfi_access_timing; /* NFI_ACCESS_TIMING */
++ unsigned int nfi_cs_num; /* NFI_CS_NUM */
++ unsigned int nand_sec_size; /* NAND_SECTOR_SIZE */
++ unsigned int nand_sec_shift; /* NAND_SECTOR_SHIFT */
++ unsigned int nand_ecc_size;
++ unsigned int nand_ecc_bytes;
++ unsigned int nand_ecc_mode;
++};
++extern struct mtk_nand_host_hw mt7621_nand_hw;
++extern unsigned int CFG_BLOCKSIZE;
++
++#endif // _MT6575_TYPEDEFS_H
++
+diff --git a/drivers/mtd/nand/mtk_nand.c b/drivers/mtd/nand/mtk_nand.c
+new file mode 100644
+index 0000000..00e150c
+--- /dev/null
++++ b/drivers/mtd/nand/mtk_nand.c
+@@ -0,0 +1,2304 @@
++/******************************************************************************
++* mtk_nand.c - MTK NAND Flash Device Driver
++ *
++* Copyright 2009-2012 MediaTek Co.,Ltd.
++ *
++* DESCRIPTION:
++* This file provid the other drivers nand relative functions
++ *
++* modification history
++* ----------------------------------------
++* v3.0, 11 Feb 2010, mtk
++* ----------------------------------------
++******************************************************************************/
++#include "nand_def.h"
++#include <linux/slab.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/delay.h>
++#include <linux/errno.h>
++#include <linux/sched.h>
++#include <linux/types.h>
++#include <linux/wait.h>
++#include <linux/spinlock.h>
++#include <linux/interrupt.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/nand.h>
++#include <linux/mtd/partitions.h>
++#include <linux/mtd/nand_ecc.h>
++#include <linux/dma-mapping.h>
++#include <linux/jiffies.h>
++#include <linux/platform_device.h>
++#include <linux/proc_fs.h>
++#include <linux/time.h>
++#include <linux/mm.h>
++#include <asm/io.h>
++#include <asm/cacheflush.h>
++#include <asm/uaccess.h>
++#include <linux/miscdevice.h>
++#include "mtk_nand.h"
++#include "nand_device_list.h"
++
++#include "bmt.h"
++#include "partition.h"
++
++unsigned int CFG_BLOCKSIZE;
++
++static int shift_on_bbt = 0;
++extern void nand_bbt_set(struct mtd_info *mtd, int page, int flag);
++extern int nand_bbt_get(struct mtd_info *mtd, int page);
++int mtk_nand_read_oob_hw(struct mtd_info *mtd, struct nand_chip *chip, int page);
++
++static const char * const probe_types[] = { "cmdlinepart", "ofpart", NULL };
++
++#define NAND_CMD_STATUS_MULTI 0x71
++
++void show_stack(struct task_struct *tsk, unsigned long *sp);
++extern void mt_irq_set_sens(unsigned int irq, unsigned int sens);
++extern void mt_irq_set_polarity(unsigned int irq,unsigned int polarity);
++
++struct mtk_nand_host mtk_nand_host; /* include mtd_info and nand_chip structs */
++struct mtk_nand_host_hw mt7621_nand_hw = {
++ .nfi_bus_width = 8,
++ .nfi_access_timing = NFI_DEFAULT_ACCESS_TIMING,
++ .nfi_cs_num = NFI_CS_NUM,
++ .nand_sec_size = 512,
++ .nand_sec_shift = 9,
++ .nand_ecc_size = 2048,
++ .nand_ecc_bytes = 32,
++ .nand_ecc_mode = NAND_ECC_HW,
++};
++
++
++/*******************************************************************************
++ * Gloable Varible Definition
++ *******************************************************************************/
++
++#define NFI_ISSUE_COMMAND(cmd, col_addr, row_addr, col_num, row_num) \
++ do { \
++ DRV_WriteReg(NFI_CMD_REG16,cmd);\
++ while (DRV_Reg32(NFI_STA_REG32) & STA_CMD_STATE);\
++ DRV_WriteReg32(NFI_COLADDR_REG32, col_addr);\
++ DRV_WriteReg32(NFI_ROWADDR_REG32, row_addr);\
++ DRV_WriteReg(NFI_ADDRNOB_REG16, col_num | (row_num<<ADDR_ROW_NOB_SHIFT));\
++ while (DRV_Reg32(NFI_STA_REG32) & STA_ADDR_STATE);\
++ }while(0);
++
++//-------------------------------------------------------------------------------
++static struct NAND_CMD g_kCMD;
++static u32 g_u4ChipVer;
++bool g_bInitDone;
++static bool g_bcmdstatus;
++static u32 g_value = 0;
++static int g_page_size;
++
++BOOL g_bHwEcc = true;
++
++
++static u8 *local_buffer_16_align; // 16 byte aligned buffer, for HW issue
++static u8 local_buffer[4096 + 512];
++
++extern void nand_release_device(struct mtd_info *mtd);
++extern int nand_get_device(struct nand_chip *chip, struct mtd_info *mtd, int new_state);
++
++#if defined(MTK_NAND_BMT)
++static bmt_struct *g_bmt;
++#endif
++struct mtk_nand_host *host;
++extern struct mtd_partition g_pasStatic_Partition[];
++int part_num = NUM_PARTITIONS;
++int manu_id;
++int dev_id;
++
++static u8 local_oob_buf[NAND_MAX_OOBSIZE];
++
++static u8 nand_badblock_offset = 0;
++
++void nand_enable_clock(void)
++{
++ //enable_clock(MT65XX_PDN_PERI_NFI, "NAND");
++}
++
++void nand_disable_clock(void)
++{
++ //disable_clock(MT65XX_PDN_PERI_NFI, "NAND");
++}
++
++static struct nand_ecclayout nand_oob_16 = {
++ .eccbytes = 8,
++ .eccpos = {8, 9, 10, 11, 12, 13, 14, 15},
++ .oobfree = {{1, 6}, {0, 0}}
++};
++
++struct nand_ecclayout nand_oob_64 = {
++ .eccbytes = 32,
++ .eccpos = {32, 33, 34, 35, 36, 37, 38, 39,
++ 40, 41, 42, 43, 44, 45, 46, 47,
++ 48, 49, 50, 51, 52, 53, 54, 55,
++ 56, 57, 58, 59, 60, 61, 62, 63},
++ .oobfree = {{1, 7}, {9, 7}, {17, 7}, {25, 6}, {0, 0}}
++};
++
++struct nand_ecclayout nand_oob_128 = {
++ .eccbytes = 64,
++ .eccpos = {
++ 64, 65, 66, 67, 68, 69, 70, 71,
++ 72, 73, 74, 75, 76, 77, 78, 79,
++ 80, 81, 82, 83, 84, 85, 86, 86,
++ 88, 89, 90, 91, 92, 93, 94, 95,
++ 96, 97, 98, 99, 100, 101, 102, 103,
++ 104, 105, 106, 107, 108, 109, 110, 111,
++ 112, 113, 114, 115, 116, 117, 118, 119,
++ 120, 121, 122, 123, 124, 125, 126, 127},
++ .oobfree = {{1, 7}, {9, 7}, {17, 7}, {25, 7}, {33, 7}, {41, 7}, {49, 7}, {57, 6}}
++};
++
++flashdev_info devinfo;
++
++void dump_nfi(void)
++{
++}
++
++void dump_ecc(void)
++{
++}
++
++u32
++nand_virt_to_phys_add(u32 va)
++{
++ u32 pageOffset = (va & (PAGE_SIZE - 1));
++ pgd_t *pgd;
++ pmd_t *pmd;
++ pte_t *pte;
++ u32 pa;
++
++ if (virt_addr_valid(va))
++ return __virt_to_phys(va);
++
++ if (NULL == current) {
++ printk(KERN_ERR "[nand_virt_to_phys_add] ERROR ,current is NULL! \n");
++ return 0;
++ }
++
++ if (NULL == current->mm) {
++ printk(KERN_ERR "[nand_virt_to_phys_add] ERROR current->mm is NULL! tgid=0x%x, name=%s \n", current->tgid, current->comm);
++ return 0;
++ }
++
++ pgd = pgd_offset(current->mm, va); /* what is tsk->mm */
++ if (pgd_none(*pgd) || pgd_bad(*pgd)) {
++ printk(KERN_ERR "[nand_virt_to_phys_add] ERROR, va=0x%x, pgd invalid! \n", va);
++ return 0;
++ }
++
++ pmd = pmd_offset((pud_t *)pgd, va);
++ if (pmd_none(*pmd) || pmd_bad(*pmd)) {
++ printk(KERN_ERR "[nand_virt_to_phys_add] ERROR, va=0x%x, pmd invalid! \n", va);
++ return 0;
++ }
++
++ pte = pte_offset_map(pmd, va);
++ if (pte_present(*pte)) {
++ pa = (pte_val(*pte) & (PAGE_MASK)) | pageOffset;
++ return pa;
++ }
++
++ printk(KERN_ERR "[nand_virt_to_phys_add] ERROR va=0x%x, pte invalid! \n", va);
++ return 0;
++}
++EXPORT_SYMBOL(nand_virt_to_phys_add);
++
++bool
++get_device_info(u16 id, u32 ext_id, flashdev_info * pdevinfo)
++{
++ u32 index;
++ for (index = 0; gen_FlashTable[index].id != 0; index++) {
++ if (id == gen_FlashTable[index].id && ext_id == gen_FlashTable[index].ext_id) {
++ pdevinfo->id = gen_FlashTable[index].id;
++ pdevinfo->ext_id = gen_FlashTable[index].ext_id;
++ pdevinfo->blocksize = gen_FlashTable[index].blocksize;
++ pdevinfo->addr_cycle = gen_FlashTable[index].addr_cycle;
++ pdevinfo->iowidth = gen_FlashTable[index].iowidth;
++ pdevinfo->timmingsetting = gen_FlashTable[index].timmingsetting;
++ pdevinfo->advancedmode = gen_FlashTable[index].advancedmode;
++ pdevinfo->pagesize = gen_FlashTable[index].pagesize;
++ pdevinfo->sparesize = gen_FlashTable[index].sparesize;
++ pdevinfo->totalsize = gen_FlashTable[index].totalsize;
++ memcpy(pdevinfo->devciename, gen_FlashTable[index].devciename, sizeof(pdevinfo->devciename));
++ printk(KERN_INFO "Device found in MTK table, ID: %x, EXT_ID: %x\n", id, ext_id);
++
++ goto find;
++ }
++ }
++
++find:
++ if (0 == pdevinfo->id) {
++ printk(KERN_INFO "Device not found, ID: %x\n", id);
++ return false;
++ } else {
++ return true;
++ }
++}
++
++static void
++ECC_Config(struct mtk_nand_host_hw *hw,u32 ecc_bit)
++{
++ u32 u4ENCODESize;
++ u32 u4DECODESize;
++ u32 ecc_bit_cfg = ECC_CNFG_ECC4;
++
++ switch(ecc_bit){
++ case 4:
++ ecc_bit_cfg = ECC_CNFG_ECC4;
++ break;
++ case 8:
++ ecc_bit_cfg = ECC_CNFG_ECC8;
++ break;
++ case 10:
++ ecc_bit_cfg = ECC_CNFG_ECC10;
++ break;
++ case 12:
++ ecc_bit_cfg = ECC_CNFG_ECC12;
++ break;
++ default:
++ break;
++ }
++ DRV_WriteReg16(ECC_DECCON_REG16, DEC_DE);
++ do {
++ } while (!DRV_Reg16(ECC_DECIDLE_REG16));
++
++ DRV_WriteReg16(ECC_ENCCON_REG16, ENC_DE);
++ do {
++ } while (!DRV_Reg32(ECC_ENCIDLE_REG32));
++
++ /* setup FDM register base */
++ DRV_WriteReg32(ECC_FDMADDR_REG32, NFI_FDM0L_REG32);
++
++ /* Sector + FDM */
++ u4ENCODESize = (hw->nand_sec_size + 8) << 3;
++ /* Sector + FDM + YAFFS2 meta data bits */
++ u4DECODESize = ((hw->nand_sec_size + 8) << 3) + ecc_bit * 13;
++
++ /* configure ECC decoder && encoder */
++ DRV_WriteReg32(ECC_DECCNFG_REG32, ecc_bit_cfg | DEC_CNFG_NFI | DEC_CNFG_EMPTY_EN | (u4DECODESize << DEC_CNFG_CODE_SHIFT));
++
++ DRV_WriteReg32(ECC_ENCCNFG_REG32, ecc_bit_cfg | ENC_CNFG_NFI | (u4ENCODESize << ENC_CNFG_MSG_SHIFT));
++ NFI_SET_REG32(ECC_DECCNFG_REG32, DEC_CNFG_EL);
++}
++
++static void
++ECC_Decode_Start(void)
++{
++ while (!(DRV_Reg16(ECC_DECIDLE_REG16) & DEC_IDLE))
++ ;
++ DRV_WriteReg16(ECC_DECCON_REG16, DEC_EN);
++}
++
++static void
++ECC_Decode_End(void)
++{
++ while (!(DRV_Reg16(ECC_DECIDLE_REG16) & DEC_IDLE))
++ ;
++ DRV_WriteReg16(ECC_DECCON_REG16, DEC_DE);
++}
++
++static void
++ECC_Encode_Start(void)
++{
++ while (!(DRV_Reg32(ECC_ENCIDLE_REG32) & ENC_IDLE))
++ ;
++ mb();
++ DRV_WriteReg16(ECC_ENCCON_REG16, ENC_EN);
++}
++
++static void
++ECC_Encode_End(void)
++{
++ /* wait for device returning idle */
++ while (!(DRV_Reg32(ECC_ENCIDLE_REG32) & ENC_IDLE)) ;
++ mb();
++ DRV_WriteReg16(ECC_ENCCON_REG16, ENC_DE);
++}
++
++static bool
++mtk_nand_check_bch_error(struct mtd_info *mtd, u8 * pDataBuf, u32 u4SecIndex, u32 u4PageAddr)
++{
++ bool bRet = true;
++ u16 u2SectorDoneMask = 1 << u4SecIndex;
++ u32 u4ErrorNumDebug, i, u4ErrNum;
++ u32 timeout = 0xFFFF;
++ // int el;
++ u32 au4ErrBitLoc[6];
++ u32 u4ErrByteLoc, u4BitOffset;
++ u32 u4ErrBitLoc1th, u4ErrBitLoc2nd;
++
++ //4 // Wait for Decode Done
++ while (0 == (u2SectorDoneMask & DRV_Reg16(ECC_DECDONE_REG16))) {
++ timeout--;
++ if (0 == timeout)
++ return false;
++ }
++ /* We will manually correct the error bits in the last sector, not all the sectors of the page! */
++ memset(au4ErrBitLoc, 0x0, sizeof(au4ErrBitLoc));
++ u4ErrorNumDebug = DRV_Reg32(ECC_DECENUM_REG32);
++ u4ErrNum = DRV_Reg32(ECC_DECENUM_REG32) >> (u4SecIndex << 2);
++ u4ErrNum &= 0xF;
++
++ if (u4ErrNum) {
++ if (0xF == u4ErrNum) {
++ mtd->ecc_stats.failed++;
++ bRet = false;
++ //printk(KERN_ERR"UnCorrectable at PageAddr=%d\n", u4PageAddr);
++ } else {
++ for (i = 0; i < ((u4ErrNum + 1) >> 1); ++i) {
++ au4ErrBitLoc[i] = DRV_Reg32(ECC_DECEL0_REG32 + i);
++ u4ErrBitLoc1th = au4ErrBitLoc[i] & 0x1FFF;
++ if (u4ErrBitLoc1th < 0x1000) {
++ u4ErrByteLoc = u4ErrBitLoc1th / 8;
++ u4BitOffset = u4ErrBitLoc1th % 8;
++ pDataBuf[u4ErrByteLoc] = pDataBuf[u4ErrByteLoc] ^ (1 << u4BitOffset);
++ mtd->ecc_stats.corrected++;
++ } else {
++ mtd->ecc_stats.failed++;
++ }
++ u4ErrBitLoc2nd = (au4ErrBitLoc[i] >> 16) & 0x1FFF;
++ if (0 != u4ErrBitLoc2nd) {
++ if (u4ErrBitLoc2nd < 0x1000) {
++ u4ErrByteLoc = u4ErrBitLoc2nd / 8;
++ u4BitOffset = u4ErrBitLoc2nd % 8;
++ pDataBuf[u4ErrByteLoc] = pDataBuf[u4ErrByteLoc] ^ (1 << u4BitOffset);
++ mtd->ecc_stats.corrected++;
++ } else {
++ mtd->ecc_stats.failed++;
++ //printk(KERN_ERR"UnCorrectable High ErrLoc=%d\n", au4ErrBitLoc[i]);
++ }
++ }
++ }
++ }
++ if (0 == (DRV_Reg16(ECC_DECFER_REG16) & (1 << u4SecIndex)))
++ bRet = false;
++ }
++ return bRet;
++}
++
++static bool
++mtk_nand_RFIFOValidSize(u16 u2Size)
++{
++ u32 timeout = 0xFFFF;
++ while (FIFO_RD_REMAIN(DRV_Reg16(NFI_FIFOSTA_REG16)) < u2Size) {
++ timeout--;
++ if (0 == timeout)
++ return false;
++ }
++ return true;
++}
++
++static bool
++mtk_nand_WFIFOValidSize(u16 u2Size)
++{
++ u32 timeout = 0xFFFF;
++
++ while (FIFO_WR_REMAIN(DRV_Reg16(NFI_FIFOSTA_REG16)) > u2Size) {
++ timeout--;
++ if (0 == timeout)
++ return false;
++ }
++ return true;
++}
++
++static bool
++mtk_nand_status_ready(u32 u4Status)
++{
++ u32 timeout = 0xFFFF;
++
++ while ((DRV_Reg32(NFI_STA_REG32) & u4Status) != 0) {
++ timeout--;
++ if (0 == timeout)
++ return false;
++ }
++ return true;
++}
++
++static bool
++mtk_nand_reset(void)
++{
++ int timeout = 0xFFFF;
++ if (DRV_Reg16(NFI_MASTERSTA_REG16)) {
++ mb();
++ DRV_WriteReg16(NFI_CON_REG16, CON_FIFO_FLUSH | CON_NFI_RST);
++ while (DRV_Reg16(NFI_MASTERSTA_REG16)) {
++ timeout--;
++ if (!timeout)
++ MSG(INIT, "Wait for NFI_MASTERSTA timeout\n");
++ }
++ }
++ /* issue reset operation */
++ mb();
++ DRV_WriteReg16(NFI_CON_REG16, CON_FIFO_FLUSH | CON_NFI_RST);
++
++ return mtk_nand_status_ready(STA_NFI_FSM_MASK | STA_NAND_BUSY) && mtk_nand_RFIFOValidSize(0) && mtk_nand_WFIFOValidSize(0);
++}
++
++static void
++mtk_nand_set_mode(u16 u2OpMode)
++{
++ u16 u2Mode = DRV_Reg16(NFI_CNFG_REG16);
++ u2Mode &= ~CNFG_OP_MODE_MASK;
++ u2Mode |= u2OpMode;
++ DRV_WriteReg16(NFI_CNFG_REG16, u2Mode);
++}
++
++static void
++mtk_nand_set_autoformat(bool bEnable)
++{
++ if (bEnable)
++ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_AUTO_FMT_EN);
++ else
++ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_AUTO_FMT_EN);
++}
++
++static void
++mtk_nand_configure_fdm(u16 u2FDMSize)
++{
++ NFI_CLN_REG16(NFI_PAGEFMT_REG16, PAGEFMT_FDM_MASK | PAGEFMT_FDM_ECC_MASK);
++ NFI_SET_REG16(NFI_PAGEFMT_REG16, u2FDMSize << PAGEFMT_FDM_SHIFT);
++ NFI_SET_REG16(NFI_PAGEFMT_REG16, u2FDMSize << PAGEFMT_FDM_ECC_SHIFT);
++}
++
++static void
++mtk_nand_configure_lock(void)
++{
++ u32 u4WriteColNOB = 2;
++ u32 u4WriteRowNOB = 3;
++ u32 u4EraseColNOB = 0;
++ u32 u4EraseRowNOB = 3;
++ DRV_WriteReg16(NFI_LOCKANOB_REG16,
++ (u4WriteColNOB << PROG_CADD_NOB_SHIFT) | (u4WriteRowNOB << PROG_RADD_NOB_SHIFT) | (u4EraseColNOB << ERASE_CADD_NOB_SHIFT) | (u4EraseRowNOB << ERASE_RADD_NOB_SHIFT));
++
++ if (CHIPVER_ECO_1 == g_u4ChipVer) {
++ int i;
++ for (i = 0; i < 16; ++i) {
++ DRV_WriteReg32(NFI_LOCK00ADD_REG32 + (i << 1), 0xFFFFFFFF);
++ DRV_WriteReg32(NFI_LOCK00FMT_REG32 + (i << 1), 0xFFFFFFFF);
++ }
++ //DRV_WriteReg16(NFI_LOCKANOB_REG16, 0x0);
++ DRV_WriteReg32(NFI_LOCKCON_REG32, 0xFFFFFFFF);
++ DRV_WriteReg16(NFI_LOCK_REG16, NFI_LOCK_ON);
++ }
++}
++
++static bool
++mtk_nand_pio_ready(void)
++{
++ int count = 0;
++ while (!(DRV_Reg16(NFI_PIO_DIRDY_REG16) & 1)) {
++ count++;
++ if (count > 0xffff) {
++ printk("PIO_DIRDY timeout\n");
++ return false;
++ }
++ }
++
++ return true;
++}
++
++static bool
++mtk_nand_set_command(u16 command)
++{
++ mb();
++ DRV_WriteReg16(NFI_CMD_REG16, command);
++ return mtk_nand_status_ready(STA_CMD_STATE);
++}
++
++static bool
++mtk_nand_set_address(u32 u4ColAddr, u32 u4RowAddr, u16 u2ColNOB, u16 u2RowNOB)
++{
++ mb();
++ DRV_WriteReg32(NFI_COLADDR_REG32, u4ColAddr);
++ DRV_WriteReg32(NFI_ROWADDR_REG32, u4RowAddr);
++ DRV_WriteReg16(NFI_ADDRNOB_REG16, u2ColNOB | (u2RowNOB << ADDR_ROW_NOB_SHIFT));
++ return mtk_nand_status_ready(STA_ADDR_STATE);
++}
++
++static bool
++mtk_nand_check_RW_count(u16 u2WriteSize)
++{
++ u32 timeout = 0xFFFF;
++ u16 u2SecNum = u2WriteSize >> 9;
++
++ while (ADDRCNTR_CNTR(DRV_Reg16(NFI_ADDRCNTR_REG16)) < u2SecNum) {
++ timeout--;
++ if (0 == timeout) {
++ printk(KERN_INFO "[%s] timeout\n", __FUNCTION__);
++ return false;
++ }
++ }
++ return true;
++}
++
++static bool
++mtk_nand_ready_for_read(struct nand_chip *nand, u32 u4RowAddr, u32 u4ColAddr, bool full, u8 * buf)
++{
++ /* Reset NFI HW internal state machine and flush NFI in/out FIFO */
++ bool bRet = false;
++ u16 sec_num = 1 << (nand->page_shift - 9);
++ u32 col_addr = u4ColAddr;
++ u32 colnob = 2, rownob = devinfo.addr_cycle - 2;
++ if (nand->options & NAND_BUSWIDTH_16)
++ col_addr /= 2;
++
++ if (!mtk_nand_reset())
++ goto cleanup;
++ if (g_bHwEcc) {
++ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
++ } else {
++ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
++ }
++
++ mtk_nand_set_mode(CNFG_OP_READ);
++ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_READ_EN);
++ DRV_WriteReg16(NFI_CON_REG16, sec_num << CON_NFI_SEC_SHIFT);
++
++ if (full) {
++ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_AHB);
++
++ if (g_bHwEcc)
++ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
++ else
++ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
++ } else {
++ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
++ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_AHB);
++ }
++
++ mtk_nand_set_autoformat(full);
++ if (full)
++ if (g_bHwEcc)
++ ECC_Decode_Start();
++ if (!mtk_nand_set_command(NAND_CMD_READ0))
++ goto cleanup;
++ if (!mtk_nand_set_address(col_addr, u4RowAddr, colnob, rownob))
++ goto cleanup;
++ if (!mtk_nand_set_command(NAND_CMD_READSTART))
++ goto cleanup;
++ if (!mtk_nand_status_ready(STA_NAND_BUSY))
++ goto cleanup;
++
++ bRet = true;
++
++cleanup:
++ return bRet;
++}
++
++static bool
++mtk_nand_ready_for_write(struct nand_chip *nand, u32 u4RowAddr, u32 col_addr, bool full, u8 * buf)
++{
++ bool bRet = false;
++ u32 sec_num = 1 << (nand->page_shift - 9);
++ u32 colnob = 2, rownob = devinfo.addr_cycle - 2;
++ if (nand->options & NAND_BUSWIDTH_16)
++ col_addr /= 2;
++
++ /* Reset NFI HW internal state machine and flush NFI in/out FIFO */
++ if (!mtk_nand_reset())
++ return false;
++
++ mtk_nand_set_mode(CNFG_OP_PRGM);
++
++ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_READ_EN);
++
++ DRV_WriteReg16(NFI_CON_REG16, sec_num << CON_NFI_SEC_SHIFT);
++
++ if (full) {
++ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_AHB);
++ if (g_bHwEcc)
++ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
++ else
++ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
++ } else {
++ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
++ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_AHB);
++ }
++
++ mtk_nand_set_autoformat(full);
++
++ if (full)
++ if (g_bHwEcc)
++ ECC_Encode_Start();
++
++ if (!mtk_nand_set_command(NAND_CMD_SEQIN))
++ goto cleanup;
++ //1 FIXED ME: For Any Kind of AddrCycle
++ if (!mtk_nand_set_address(col_addr, u4RowAddr, colnob, rownob))
++ goto cleanup;
++
++ if (!mtk_nand_status_ready(STA_NAND_BUSY))
++ goto cleanup;
++
++ bRet = true;
++
++cleanup:
++ return bRet;
++}
++
++static bool
++mtk_nand_check_dececc_done(u32 u4SecNum)
++{
++ u32 timeout, dec_mask;
++
++ timeout = 0xffff;
++ dec_mask = (1 << u4SecNum) - 1;
++ while ((dec_mask != DRV_Reg(ECC_DECDONE_REG16)) && timeout > 0)
++ timeout--;
++ if (timeout == 0) {
++ MSG(VERIFY, "ECC_DECDONE: timeout\n");
++ return false;
++ }
++ return true;
++}
++
++static bool
++mtk_nand_mcu_read_data(u8 * buf, u32 length)
++{
++ int timeout = 0xffff;
++ u32 i;
++ u32 *buf32 = (u32 *) buf;
++ if ((u32) buf % 4 || length % 4)
++ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_BYTE_RW);
++ else
++ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_BYTE_RW);
++
++ //DRV_WriteReg32(NFI_STRADDR_REG32, 0);
++ mb();
++ NFI_SET_REG16(NFI_CON_REG16, CON_NFI_BRD);
++
++ if ((u32) buf % 4 || length % 4) {
++ for (i = 0; (i < (length)) && (timeout > 0);) {
++ if (DRV_Reg16(NFI_PIO_DIRDY_REG16) & 1) {
++ *buf++ = (u8) DRV_Reg32(NFI_DATAR_REG32);
++ i++;
++ } else {
++ timeout--;
++ }
++ if (0 == timeout) {
++ printk(KERN_ERR "[%s] timeout\n", __FUNCTION__);
++ dump_nfi();
++ return false;
++ }
++ }
++ } else {
++ for (i = 0; (i < (length >> 2)) && (timeout > 0);) {
++ if (DRV_Reg16(NFI_PIO_DIRDY_REG16) & 1) {
++ *buf32++ = DRV_Reg32(NFI_DATAR_REG32);
++ i++;
++ } else {
++ timeout--;
++ }
++ if (0 == timeout) {
++ printk(KERN_ERR "[%s] timeout\n", __FUNCTION__);
++ dump_nfi();
++ return false;
++ }
++ }
++ }
++ return true;
++}
++
++static bool
++mtk_nand_read_page_data(struct mtd_info *mtd, u8 * pDataBuf, u32 u4Size)
++{
++ return mtk_nand_mcu_read_data(pDataBuf, u4Size);
++}
++
++static bool
++mtk_nand_mcu_write_data(struct mtd_info *mtd, const u8 * buf, u32 length)
++{
++ u32 timeout = 0xFFFF;
++ u32 i;
++ u32 *pBuf32;
++ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_BYTE_RW);
++ mb();
++ NFI_SET_REG16(NFI_CON_REG16, CON_NFI_BWR);
++ pBuf32 = (u32 *) buf;
++
++ if ((u32) buf % 4 || length % 4)
++ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_BYTE_RW);
++ else
++ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_BYTE_RW);
++
++ if ((u32) buf % 4 || length % 4) {
++ for (i = 0; (i < (length)) && (timeout > 0);) {
++ if (DRV_Reg16(NFI_PIO_DIRDY_REG16) & 1) {
++ DRV_WriteReg32(NFI_DATAW_REG32, *buf++);
++ i++;
++ } else {
++ timeout--;
++ }
++ if (0 == timeout) {
++ printk(KERN_ERR "[%s] timeout\n", __FUNCTION__);
++ dump_nfi();
++ return false;
++ }
++ }
++ } else {
++ for (i = 0; (i < (length >> 2)) && (timeout > 0);) {
++ if (DRV_Reg16(NFI_PIO_DIRDY_REG16) & 1) {
++ DRV_WriteReg32(NFI_DATAW_REG32, *pBuf32++);
++ i++;
++ } else {
++ timeout--;
++ }
++ if (0 == timeout) {
++ printk(KERN_ERR "[%s] timeout\n", __FUNCTION__);
++ dump_nfi();
++ return false;
++ }
++ }
++ }
++
++ return true;
++}
++
++static bool
++mtk_nand_write_page_data(struct mtd_info *mtd, u8 * buf, u32 size)
++{
++ return mtk_nand_mcu_write_data(mtd, buf, size);
++}
++
++static void
++mtk_nand_read_fdm_data(u8 * pDataBuf, u32 u4SecNum)
++{
++ u32 i;
++ u32 *pBuf32 = (u32 *) pDataBuf;
++
++ if (pBuf32) {
++ for (i = 0; i < u4SecNum; ++i) {
++ *pBuf32++ = DRV_Reg32(NFI_FDM0L_REG32 + (i << 1));
++ *pBuf32++ = DRV_Reg32(NFI_FDM0M_REG32 + (i << 1));
++ }
++ }
++}
++
++static u8 fdm_buf[64];
++static void
++mtk_nand_write_fdm_data(struct nand_chip *chip, u8 * pDataBuf, u32 u4SecNum)
++{
++ u32 i, j;
++ u8 checksum = 0;
++ bool empty = true;
++ struct nand_oobfree *free_entry;
++ u32 *pBuf32;
++
++ memcpy(fdm_buf, pDataBuf, u4SecNum * 8);
++
++ free_entry = chip->ecc.layout->oobfree;
++ for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free_entry[i].length; i++) {
++ for (j = 0; j < free_entry[i].length; j++) {
++ if (pDataBuf[free_entry[i].offset + j] != 0xFF)
++ empty = false;
++ checksum ^= pDataBuf[free_entry[i].offset + j];
++ }
++ }
++
++ if (!empty) {
++ fdm_buf[free_entry[i - 1].offset + free_entry[i - 1].length] = checksum;
++ }
++
++ pBuf32 = (u32 *) fdm_buf;
++ for (i = 0; i < u4SecNum; ++i) {
++ DRV_WriteReg32(NFI_FDM0L_REG32 + (i << 1), *pBuf32++);
++ DRV_WriteReg32(NFI_FDM0M_REG32 + (i << 1), *pBuf32++);
++ }
++}
++
++static void
++mtk_nand_stop_read(void)
++{
++ NFI_CLN_REG16(NFI_CON_REG16, CON_NFI_BRD);
++ mtk_nand_reset();
++ if (g_bHwEcc)
++ ECC_Decode_End();
++ DRV_WriteReg16(NFI_INTR_EN_REG16, 0);
++}
++
++static void
++mtk_nand_stop_write(void)
++{
++ NFI_CLN_REG16(NFI_CON_REG16, CON_NFI_BWR);
++ if (g_bHwEcc)
++ ECC_Encode_End();
++ DRV_WriteReg16(NFI_INTR_EN_REG16, 0);
++}
++
++bool
++mtk_nand_exec_read_page(struct mtd_info *mtd, u32 u4RowAddr, u32 u4PageSize, u8 * pPageBuf, u8 * pFDMBuf)
++{
++ u8 *buf;
++ bool bRet = true;
++ struct nand_chip *nand = mtd->priv;
++ u32 u4SecNum = u4PageSize >> 9;
++
++ if (((u32) pPageBuf % 16) && local_buffer_16_align)
++ buf = local_buffer_16_align;
++ else
++ buf = pPageBuf;
++ if (mtk_nand_ready_for_read(nand, u4RowAddr, 0, true, buf)) {
++ int j;
++ for (j = 0 ; j < u4SecNum; j++) {
++ if (!mtk_nand_read_page_data(mtd, buf+j*512, 512))
++ bRet = false;
++ if(g_bHwEcc && !mtk_nand_check_dececc_done(j+1))
++ bRet = false;
++ if(g_bHwEcc && !mtk_nand_check_bch_error(mtd, buf+j*512, j, u4RowAddr))
++ bRet = false;
++ }
++ if (!mtk_nand_status_ready(STA_NAND_BUSY))
++ bRet = false;
++
++ mtk_nand_read_fdm_data(pFDMBuf, u4SecNum);
++ mtk_nand_stop_read();
++ }
++
++ if (buf == local_buffer_16_align)
++ memcpy(pPageBuf, buf, u4PageSize);
++
++ return bRet;
++}
++
++int
++mtk_nand_exec_write_page(struct mtd_info *mtd, u32 u4RowAddr, u32 u4PageSize, u8 * pPageBuf, u8 * pFDMBuf)
++{
++ struct nand_chip *chip = mtd->priv;
++ u32 u4SecNum = u4PageSize >> 9;
++ u8 *buf;
++ u8 status;
++
++ MSG(WRITE, "mtk_nand_exec_write_page, page: 0x%x\n", u4RowAddr);
++
++ if (((u32) pPageBuf % 16) && local_buffer_16_align) {
++ printk(KERN_INFO "Data buffer not 16 bytes aligned: %p\n", pPageBuf);
++ memcpy(local_buffer_16_align, pPageBuf, mtd->writesize);
++ buf = local_buffer_16_align;
++ } else
++ buf = pPageBuf;
++
++ if (mtk_nand_ready_for_write(chip, u4RowAddr, 0, true, buf)) {
++ mtk_nand_write_fdm_data(chip, pFDMBuf, u4SecNum);
++ (void)mtk_nand_write_page_data(mtd, buf, u4PageSize);
++ (void)mtk_nand_check_RW_count(u4PageSize);
++ mtk_nand_stop_write();
++ (void)mtk_nand_set_command(NAND_CMD_PAGEPROG);
++ while (DRV_Reg32(NFI_STA_REG32) & STA_NAND_BUSY) ;
++ }
++
++ status = chip->waitfunc(mtd, chip);
++ if (status & NAND_STATUS_FAIL)
++ return -EIO;
++ return 0;
++}
++
++static int
++get_start_end_block(struct mtd_info *mtd, int block, int *start_blk, int *end_blk)
++{
++ struct nand_chip *chip = mtd->priv;
++ int i;
++
++ *start_blk = 0;
++ for (i = 0; i <= part_num; i++)
++ {
++ if (i == part_num)
++ {
++ // try the last reset partition
++ *end_blk = (chip->chipsize >> chip->phys_erase_shift) - 1;
++ if (*start_blk <= *end_blk)
++ {
++ if ((block >= *start_blk) && (block <= *end_blk))
++ break;
++ }
++ }
++ // skip All partition entry
++ else if (g_pasStatic_Partition[i].size == MTDPART_SIZ_FULL)
++ {
++ continue;
++ }
++ *end_blk = *start_blk + (g_pasStatic_Partition[i].size >> chip->phys_erase_shift) - 1;
++ if ((block >= *start_blk) && (block <= *end_blk))
++ break;
++ *start_blk = *end_blk + 1;
++ }
++ if (*start_blk > *end_blk)
++ {
++ return -1;
++ }
++ return 0;
++}
++
++static int
++block_remap(struct mtd_info *mtd, int block)
++{
++ struct nand_chip *chip = mtd->priv;
++ int start_blk, end_blk;
++ int j, block_offset;
++ int bad_block = 0;
++
++ if (chip->bbt == NULL) {
++ printk("ERROR!! no bbt table for block_remap\n");
++ return -1;
++ }
++
++ if (get_start_end_block(mtd, block, &start_blk, &end_blk) < 0) {
++ printk("ERROR!! can not find start_blk and end_blk\n");
++ return -1;
++ }
++
++ block_offset = block - start_blk;
++ for (j = start_blk; j <= end_blk;j++) {
++ if (((chip->bbt[j >> 2] >> ((j<<1) & 0x6)) & 0x3) == 0x0) {
++ if (!block_offset)
++ break;
++ block_offset--;
++ } else {
++ bad_block++;
++ }
++ }
++ if (j <= end_blk) {
++ return j;
++ } else {
++ // remap to the bad block
++ for (j = end_blk; bad_block > 0; j--)
++ {
++ if (((chip->bbt[j >> 2] >> ((j<<1) & 0x6)) & 0x3) != 0x0)
++ {
++ bad_block--;
++ if (bad_block <= block_offset)
++ return j;
++ }
++ }
++ }
++
++ printk("Error!! block_remap error\n");
++ return -1;
++}
++
++int
++check_block_remap(struct mtd_info *mtd, int block)
++{
++ if (shift_on_bbt)
++ return block_remap(mtd, block);
++ else
++ return block;
++}
++EXPORT_SYMBOL(check_block_remap);
++
++
++static int
++write_next_on_fail(struct mtd_info *mtd, char *write_buf, int page, int * to_blk)
++{
++ struct nand_chip *chip = mtd->priv;
++ int i, j, to_page = 0, first_page;
++ char *buf, *oob;
++ int start_blk = 0, end_blk;
++ int mapped_block;
++ int page_per_block_bit = chip->phys_erase_shift - chip->page_shift;
++ int block = page >> page_per_block_bit;
++
++ // find next available block in the same MTD partition
++ mapped_block = block_remap(mtd, block);
++ if (mapped_block == -1)
++ return NAND_STATUS_FAIL;
++
++ get_start_end_block(mtd, block, &start_blk, &end_blk);
++
++ buf = kzalloc(mtd->writesize + mtd->oobsize, GFP_KERNEL | GFP_DMA);
++ if (buf == NULL)
++ return -1;
++
++ oob = buf + mtd->writesize;
++ for ((*to_blk) = block + 1; (*to_blk) <= end_blk ; (*to_blk)++) {
++ if (nand_bbt_get(mtd, (*to_blk) << page_per_block_bit) == 0) {
++ int status;
++ status = mtk_nand_erase_hw(mtd, (*to_blk) << page_per_block_bit);
++ if (status & NAND_STATUS_FAIL) {
++ mtk_nand_block_markbad_hw(mtd, (*to_blk) << chip->phys_erase_shift);
++ nand_bbt_set(mtd, (*to_blk) << page_per_block_bit, 0x3);
++ } else {
++ /* good block */
++ to_page = (*to_blk) << page_per_block_bit;
++ break;
++ }
++ }
++ }
++
++ if (!to_page) {
++ kfree(buf);
++ return -1;
++ }
++
++ first_page = (page >> page_per_block_bit) << page_per_block_bit;
++ for (i = 0; i < (1 << page_per_block_bit); i++) {
++ if ((first_page + i) != page) {
++ mtk_nand_read_oob_hw(mtd, chip, (first_page+i));
++ for (j = 0; j < mtd->oobsize; j++)
++ if (chip->oob_poi[j] != (unsigned char)0xff)
++ break;
++ if (j < mtd->oobsize) {
++ mtk_nand_exec_read_page(mtd, (first_page+i), mtd->writesize, buf, oob);
++ memset(oob, 0xff, mtd->oobsize);
++ if (mtk_nand_exec_write_page(mtd, to_page + i, mtd->writesize, (u8 *)buf, oob) != 0) {
++ int ret, new_blk = 0;
++ nand_bbt_set(mtd, to_page, 0x3);
++ ret = write_next_on_fail(mtd, buf, to_page + i, &new_blk);
++ if (ret) {
++ kfree(buf);
++ mtk_nand_block_markbad_hw(mtd, to_page << chip->page_shift);
++ return ret;
++ }
++ mtk_nand_block_markbad_hw(mtd, to_page << chip->page_shift);
++ *to_blk = new_blk;
++ to_page = ((*to_blk) << page_per_block_bit);
++ }
++ }
++ } else {
++ memset(chip->oob_poi, 0xff, mtd->oobsize);
++ if (mtk_nand_exec_write_page(mtd, to_page + i, mtd->writesize, (u8 *)write_buf, chip->oob_poi) != 0) {
++ int ret, new_blk = 0;
++ nand_bbt_set(mtd, to_page, 0x3);
++ ret = write_next_on_fail(mtd, write_buf, to_page + i, &new_blk);
++ if (ret) {
++ kfree(buf);
++ mtk_nand_block_markbad_hw(mtd, to_page << chip->page_shift);
++ return ret;
++ }
++ mtk_nand_block_markbad_hw(mtd, to_page << chip->page_shift);
++ *to_blk = new_blk;
++ to_page = ((*to_blk) << page_per_block_bit);
++ }
++ }
++ }
++
++ kfree(buf);
++
++ return 0;
++}
++
++static int
++mtk_nand_write_page(struct mtd_info *mtd, struct nand_chip *chip, uint32_t offset,
++ int data_len, const u8 * buf, int oob_required, int page, int cached, int raw)
++{
++ int page_per_block = 1 << (chip->phys_erase_shift - chip->page_shift);
++ int block = page / page_per_block;
++ u16 page_in_block = page % page_per_block;
++ int mapped_block = block;
++
++#if defined(MTK_NAND_BMT)
++ mapped_block = get_mapping_block_index(block);
++ // write bad index into oob
++ if (mapped_block != block)
++ set_bad_index_to_oob(chip->oob_poi, block);
++ else
++ set_bad_index_to_oob(chip->oob_poi, FAKE_INDEX);
++#else
++ if (shift_on_bbt) {
++ mapped_block = block_remap(mtd, block);
++ if (mapped_block == -1)
++ return NAND_STATUS_FAIL;
++ if (nand_bbt_get(mtd, mapped_block << (chip->phys_erase_shift - chip->page_shift)) != 0x0)
++ return NAND_STATUS_FAIL;
++ }
++#endif
++ do {
++ if (mtk_nand_exec_write_page(mtd, page_in_block + mapped_block * page_per_block, mtd->writesize, (u8 *)buf, chip->oob_poi)) {
++ MSG(INIT, "write fail at block: 0x%x, page: 0x%x\n", mapped_block, page_in_block);
++#if defined(MTK_NAND_BMT)
++ if (update_bmt((page_in_block + mapped_block * page_per_block) << chip->page_shift, UPDATE_WRITE_FAIL, (u8 *) buf, chip->oob_poi)) {
++ MSG(INIT, "Update BMT success\n");
++ return 0;
++ } else {
++ MSG(INIT, "Update BMT fail\n");
++ return -EIO;
++ }
++#else
++ {
++ int new_blk;
++ nand_bbt_set(mtd, page_in_block + mapped_block * page_per_block, 0x3);
++ if (write_next_on_fail(mtd, (char *)buf, page_in_block + mapped_block * page_per_block, &new_blk) != 0)
++ {
++ mtk_nand_block_markbad_hw(mtd, (page_in_block + mapped_block * page_per_block) << chip->page_shift);
++ return NAND_STATUS_FAIL;
++ }
++ mtk_nand_block_markbad_hw(mtd, (page_in_block + mapped_block * page_per_block) << chip->page_shift);
++ break;
++ }
++#endif
++ } else
++ break;
++ } while(1);
++
++ return 0;
++}
++
++static void
++mtk_nand_command_bp(struct mtd_info *mtd, unsigned int command, int column, int page_addr)
++{
++ struct nand_chip *nand = mtd->priv;
++
++ switch (command) {
++ case NAND_CMD_SEQIN:
++ memset(g_kCMD.au1OOB, 0xFF, sizeof(g_kCMD.au1OOB));
++ g_kCMD.pDataBuf = NULL;
++ g_kCMD.u4RowAddr = page_addr;
++ g_kCMD.u4ColAddr = column;
++ break;
++
++ case NAND_CMD_PAGEPROG:
++ if (g_kCMD.pDataBuf || (0xFF != g_kCMD.au1OOB[nand_badblock_offset])) {
++ u8 *pDataBuf = g_kCMD.pDataBuf ? g_kCMD.pDataBuf : nand->buffers->databuf;
++ mtk_nand_exec_write_page(mtd, g_kCMD.u4RowAddr, mtd->writesize, pDataBuf, g_kCMD.au1OOB);
++ g_kCMD.u4RowAddr = (u32) - 1;
++ g_kCMD.u4OOBRowAddr = (u32) - 1;
++ }
++ break;
++
++ case NAND_CMD_READOOB:
++ g_kCMD.u4RowAddr = page_addr;
++ g_kCMD.u4ColAddr = column + mtd->writesize;
++ break;
++
++ case NAND_CMD_READ0:
++ g_kCMD.u4RowAddr = page_addr;
++ g_kCMD.u4ColAddr = column;
++ break;
++
++ case NAND_CMD_ERASE1:
++ nand->state=FL_ERASING;
++ (void)mtk_nand_reset();
++ mtk_nand_set_mode(CNFG_OP_ERASE);
++ (void)mtk_nand_set_command(NAND_CMD_ERASE1);
++ (void)mtk_nand_set_address(0, page_addr, 0, devinfo.addr_cycle - 2);
++ break;
++
++ case NAND_CMD_ERASE2:
++ (void)mtk_nand_set_command(NAND_CMD_ERASE2);
++ while (DRV_Reg32(NFI_STA_REG32) & STA_NAND_BUSY)
++ ;
++ break;
++
++ case NAND_CMD_STATUS:
++ (void)mtk_nand_reset();
++ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_BYTE_RW);
++ mtk_nand_set_mode(CNFG_OP_SRD);
++ mtk_nand_set_mode(CNFG_READ_EN);
++ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_AHB);
++ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
++ (void)mtk_nand_set_command(NAND_CMD_STATUS);
++ NFI_CLN_REG16(NFI_CON_REG16, CON_NFI_NOB_MASK);
++ mb();
++ DRV_WriteReg16(NFI_CON_REG16, CON_NFI_SRD | (1 << CON_NFI_NOB_SHIFT));
++ g_bcmdstatus = true;
++ break;
++
++ case NAND_CMD_RESET:
++ (void)mtk_nand_reset();
++ DRV_WriteReg16(NFI_INTR_EN_REG16, INTR_RST_DONE_EN);
++ (void)mtk_nand_set_command(NAND_CMD_RESET);
++ DRV_WriteReg16(NFI_BASE+0x44, 0xF1);
++ while(!(DRV_Reg16(NFI_INTR_REG16)&INTR_RST_DONE_EN))
++ ;
++ break;
++
++ case NAND_CMD_READID:
++ mtk_nand_reset();
++ /* Disable HW ECC */
++ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
++ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_AHB);
++ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_READ_EN | CNFG_BYTE_RW);
++ (void)mtk_nand_reset();
++ mb();
++ mtk_nand_set_mode(CNFG_OP_SRD);
++ (void)mtk_nand_set_command(NAND_CMD_READID);
++ (void)mtk_nand_set_address(0, 0, 1, 0);
++ DRV_WriteReg16(NFI_CON_REG16, CON_NFI_SRD);
++ while (DRV_Reg32(NFI_STA_REG32) & STA_DATAR_STATE)
++ ;
++ break;
++
++ default:
++ BUG();
++ break;
++ }
++}
++
++static void
++mtk_nand_select_chip(struct mtd_info *mtd, int chip)
++{
++ if ((chip == -1) && (false == g_bInitDone)) {
++ struct nand_chip *nand = mtd->priv;
++ struct mtk_nand_host *host = nand->priv;
++ struct mtk_nand_host_hw *hw = host->hw;
++ u32 spare_per_sector = mtd->oobsize / (mtd->writesize / 512);
++ u32 ecc_bit = 4;
++ u32 spare_bit = PAGEFMT_SPARE_16;
++
++ if (spare_per_sector >= 28) {
++ spare_bit = PAGEFMT_SPARE_28;
++ ecc_bit = 12;
++ spare_per_sector = 28;
++ } else if (spare_per_sector >= 27) {
++ spare_bit = PAGEFMT_SPARE_27;
++ ecc_bit = 8;
++ spare_per_sector = 27;
++ } else if (spare_per_sector >= 26) {
++ spare_bit = PAGEFMT_SPARE_26;
++ ecc_bit = 8;
++ spare_per_sector = 26;
++ } else if (spare_per_sector >= 16) {
++ spare_bit = PAGEFMT_SPARE_16;
++ ecc_bit = 4;
++ spare_per_sector = 16;
++ } else {
++ MSG(INIT, "[NAND]: NFI not support oobsize: %x\n", spare_per_sector);
++ ASSERT(0);
++ }
++ mtd->oobsize = spare_per_sector*(mtd->writesize/512);
++ MSG(INIT, "[NAND]select ecc bit:%d, sparesize :%d spare_per_sector=%d\n",ecc_bit,mtd->oobsize,spare_per_sector);
++ /* Setup PageFormat */
++ if (4096 == mtd->writesize) {
++ NFI_SET_REG16(NFI_PAGEFMT_REG16, (spare_bit << PAGEFMT_SPARE_SHIFT) | PAGEFMT_4K);
++ nand->cmdfunc = mtk_nand_command_bp;
++ } else if (2048 == mtd->writesize) {
++ NFI_SET_REG16(NFI_PAGEFMT_REG16, (spare_bit << PAGEFMT_SPARE_SHIFT) | PAGEFMT_2K);
++ nand->cmdfunc = mtk_nand_command_bp;
++ }
++ ECC_Config(hw,ecc_bit);
++ g_bInitDone = true;
++ }
++ switch (chip) {
++ case -1:
++ break;
++ case 0:
++ case 1:
++ /* Jun Shen, 2011.04.13 */
++ /* Note: MT6577 EVB NAND is mounted on CS0, but FPGA is CS1 */
++ DRV_WriteReg16(NFI_CSEL_REG16, chip);
++ /* Jun Shen, 2011.04.13 */
++ break;
++ }
++}
++
++static uint8_t
++mtk_nand_read_byte(struct mtd_info *mtd)
++{
++ uint8_t retval = 0;
++
++ if (!mtk_nand_pio_ready()) {
++ printk("pio ready timeout\n");
++ retval = false;
++ }
++
++ if (g_bcmdstatus) {
++ retval = DRV_Reg8(NFI_DATAR_REG32);
++ NFI_CLN_REG16(NFI_CON_REG16, CON_NFI_NOB_MASK);
++ mtk_nand_reset();
++ if (g_bHwEcc) {
++ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
++ } else {
++ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
++ }
++ g_bcmdstatus = false;
++ } else
++ retval = DRV_Reg8(NFI_DATAR_REG32);
++
++ return retval;
++}
++
++static void
++mtk_nand_read_buf(struct mtd_info *mtd, uint8_t * buf, int len)
++{
++ struct nand_chip *nand = (struct nand_chip *)mtd->priv;
++ struct NAND_CMD *pkCMD = &g_kCMD;
++ u32 u4ColAddr = pkCMD->u4ColAddr;
++ u32 u4PageSize = mtd->writesize;
++
++ if (u4ColAddr < u4PageSize) {
++ if ((u4ColAddr == 0) && (len >= u4PageSize)) {
++ mtk_nand_exec_read_page(mtd, pkCMD->u4RowAddr, u4PageSize, buf, pkCMD->au1OOB);
++ if (len > u4PageSize) {
++ u32 u4Size = min(len - u4PageSize, sizeof(pkCMD->au1OOB));
++ memcpy(buf + u4PageSize, pkCMD->au1OOB, u4Size);
++ }
++ } else {
++ mtk_nand_exec_read_page(mtd, pkCMD->u4RowAddr, u4PageSize, nand->buffers->databuf, pkCMD->au1OOB);
++ memcpy(buf, nand->buffers->databuf + u4ColAddr, len);
++ }
++ pkCMD->u4OOBRowAddr = pkCMD->u4RowAddr;
++ } else {
++ u32 u4Offset = u4ColAddr - u4PageSize;
++ u32 u4Size = min(len - u4Offset, sizeof(pkCMD->au1OOB));
++ if (pkCMD->u4OOBRowAddr != pkCMD->u4RowAddr) {
++ mtk_nand_exec_read_page(mtd, pkCMD->u4RowAddr, u4PageSize, nand->buffers->databuf, pkCMD->au1OOB);
++ pkCMD->u4OOBRowAddr = pkCMD->u4RowAddr;
++ }
++ memcpy(buf, pkCMD->au1OOB + u4Offset, u4Size);
++ }
++ pkCMD->u4ColAddr += len;
++}
++
++static void
++mtk_nand_write_buf(struct mtd_info *mtd, const uint8_t * buf, int len)
++{
++ struct NAND_CMD *pkCMD = &g_kCMD;
++ u32 u4ColAddr = pkCMD->u4ColAddr;
++ u32 u4PageSize = mtd->writesize;
++ int i4Size, i;
++
++ if (u4ColAddr >= u4PageSize) {
++ u32 u4Offset = u4ColAddr - u4PageSize;
++ u8 *pOOB = pkCMD->au1OOB + u4Offset;
++ i4Size = min(len, (int)(sizeof(pkCMD->au1OOB) - u4Offset));
++ for (i = 0; i < i4Size; i++) {
++ pOOB[i] &= buf[i];
++ }
++ } else {
++ pkCMD->pDataBuf = (u8 *) buf;
++ }
++
++ pkCMD->u4ColAddr += len;
++}
++
++static int
++mtk_nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t * buf, int oob_required)
++{
++ mtk_nand_write_buf(mtd, buf, mtd->writesize);
++ mtk_nand_write_buf(mtd, chip->oob_poi, mtd->oobsize);
++ return 0;
++}
++
++static int
++mtk_nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, uint8_t * buf, int oob_required, int page)
++{
++ struct NAND_CMD *pkCMD = &g_kCMD;
++ u32 u4ColAddr = pkCMD->u4ColAddr;
++ u32 u4PageSize = mtd->writesize;
++
++ if (u4ColAddr == 0) {
++ mtk_nand_exec_read_page(mtd, pkCMD->u4RowAddr, u4PageSize, buf, chip->oob_poi);
++ pkCMD->u4ColAddr += u4PageSize + mtd->oobsize;
++ }
++
++ return 0;
++}
++
++static int
++mtk_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip, u8 * buf, int page)
++{
++ int page_per_block = 1 << (chip->phys_erase_shift - chip->page_shift);
++ int block = page / page_per_block;
++ u16 page_in_block = page % page_per_block;
++ int mapped_block = block;
++
++#if defined (MTK_NAND_BMT)
++ mapped_block = get_mapping_block_index(block);
++ if (mtk_nand_exec_read_page(mtd, page_in_block + mapped_block * page_per_block,
++ mtd->writesize, buf, chip->oob_poi))
++ return 0;
++#else
++ if (shift_on_bbt) {
++ mapped_block = block_remap(mtd, block);
++ if (mapped_block == -1)
++ return NAND_STATUS_FAIL;
++ if (nand_bbt_get(mtd, mapped_block << (chip->phys_erase_shift - chip->page_shift)) != 0x0)
++ return NAND_STATUS_FAIL;
++ }
++
++ if (mtk_nand_exec_read_page(mtd, page_in_block + mapped_block * page_per_block, mtd->writesize, buf, chip->oob_poi))
++ return 0;
++ else
++ return -EIO;
++#endif
++}
++
++int
++mtk_nand_erase_hw(struct mtd_info *mtd, int page)
++{
++ struct nand_chip *chip = (struct nand_chip *)mtd->priv;
++
++ chip->erase_cmd(mtd, page);
++
++ return chip->waitfunc(mtd, chip);
++}
++
++static int
++mtk_nand_erase(struct mtd_info *mtd, int page)
++{
++ // get mapping
++ struct nand_chip *chip = mtd->priv;
++ int page_per_block = 1 << (chip->phys_erase_shift - chip->page_shift);
++ int page_in_block = page % page_per_block;
++ int block = page / page_per_block;
++ int mapped_block = block;
++
++#if defined(MTK_NAND_BMT)
++ mapped_block = get_mapping_block_index(block);
++#else
++ if (shift_on_bbt) {
++ mapped_block = block_remap(mtd, block);
++ if (mapped_block == -1)
++ return NAND_STATUS_FAIL;
++ if (nand_bbt_get(mtd, mapped_block << (chip->phys_erase_shift - chip->page_shift)) != 0x0)
++ return NAND_STATUS_FAIL;
++ }
++#endif
++
++ do {
++ int status = mtk_nand_erase_hw(mtd, page_in_block + page_per_block * mapped_block);
++
++ if (status & NAND_STATUS_FAIL) {
++#if defined (MTK_NAND_BMT)
++ if (update_bmt( (page_in_block + mapped_block * page_per_block) << chip->page_shift,
++ UPDATE_ERASE_FAIL, NULL, NULL))
++ {
++ MSG(INIT, "Erase fail at block: 0x%x, update BMT success\n", mapped_block);
++ return 0;
++ } else {
++ MSG(INIT, "Erase fail at block: 0x%x, update BMT fail\n", mapped_block);
++ return NAND_STATUS_FAIL;
++ }
++#else
++ mtk_nand_block_markbad_hw(mtd, (page_in_block + mapped_block * page_per_block) << chip->page_shift);
++ nand_bbt_set(mtd, page_in_block + mapped_block * page_per_block, 0x3);
++ if (shift_on_bbt) {
++ mapped_block = block_remap(mtd, block);
++ if (mapped_block == -1)
++ return NAND_STATUS_FAIL;
++ if (nand_bbt_get(mtd, mapped_block << (chip->phys_erase_shift - chip->page_shift)) != 0x0)
++ return NAND_STATUS_FAIL;
++ } else
++ return NAND_STATUS_FAIL;
++#endif
++ } else
++ break;
++ } while(1);
++
++ return 0;
++}
++
++static int
++mtk_nand_read_oob_raw(struct mtd_info *mtd, uint8_t * buf, int page_addr, int len)
++{
++ struct nand_chip *chip = (struct nand_chip *)mtd->priv;
++ u32 col_addr = 0;
++ u32 sector = 0;
++ int res = 0;
++ u32 colnob = 2, rawnob = devinfo.addr_cycle - 2;
++ int randomread = 0;
++ int read_len = 0;
++ int sec_num = 1<<(chip->page_shift-9);
++ int spare_per_sector = mtd->oobsize/sec_num;
++
++ if (len > NAND_MAX_OOBSIZE || len % OOB_AVAI_PER_SECTOR || !buf) {
++ printk(KERN_WARNING "[%s] invalid parameter, len: %d, buf: %p\n", __FUNCTION__, len, buf);
++ return -EINVAL;
++ }
++ if (len > spare_per_sector)
++ randomread = 1;
++ if (!randomread || !(devinfo.advancedmode & RAMDOM_READ)) {
++ while (len > 0) {
++ read_len = min(len, spare_per_sector);
++ col_addr = NAND_SECTOR_SIZE + sector * (NAND_SECTOR_SIZE + spare_per_sector); // TODO: Fix this hard-code 16
++ if (!mtk_nand_ready_for_read(chip, page_addr, col_addr, false, NULL)) {
++ printk(KERN_WARNING "mtk_nand_ready_for_read return failed\n");
++ res = -EIO;
++ goto error;
++ }
++ if (!mtk_nand_mcu_read_data(buf + spare_per_sector * sector, read_len)) {
++ printk(KERN_WARNING "mtk_nand_mcu_read_data return failed\n");
++ res = -EIO;
++ goto error;
++ }
++ mtk_nand_check_RW_count(read_len);
++ mtk_nand_stop_read();
++ sector++;
++ len -= read_len;
++ }
++ } else {
++ col_addr = NAND_SECTOR_SIZE;
++ if (chip->options & NAND_BUSWIDTH_16)
++ col_addr /= 2;
++ if (!mtk_nand_reset())
++ goto error;
++ mtk_nand_set_mode(0x6000);
++ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_READ_EN);
++ DRV_WriteReg16(NFI_CON_REG16, 4 << CON_NFI_SEC_SHIFT);
++
++ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_AHB);
++ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
++
++ mtk_nand_set_autoformat(false);
++
++ if (!mtk_nand_set_command(NAND_CMD_READ0))
++ goto error;
++ //1 FIXED ME: For Any Kind of AddrCycle
++ if (!mtk_nand_set_address(col_addr, page_addr, colnob, rawnob))
++ goto error;
++ if (!mtk_nand_set_command(NAND_CMD_READSTART))
++ goto error;
++ if (!mtk_nand_status_ready(STA_NAND_BUSY))
++ goto error;
++ read_len = min(len, spare_per_sector);
++ if (!mtk_nand_mcu_read_data(buf + spare_per_sector * sector, read_len)) {
++ printk(KERN_WARNING "mtk_nand_mcu_read_data return failed first 16\n");
++ res = -EIO;
++ goto error;
++ }
++ sector++;
++ len -= read_len;
++ mtk_nand_stop_read();
++ while (len > 0) {
++ read_len = min(len, spare_per_sector);
++ if (!mtk_nand_set_command(0x05))
++ goto error;
++ col_addr = NAND_SECTOR_SIZE + sector * (NAND_SECTOR_SIZE + spare_per_sector);
++ if (chip->options & NAND_BUSWIDTH_16)
++ col_addr /= 2;
++ DRV_WriteReg32(NFI_COLADDR_REG32, col_addr);
++ DRV_WriteReg16(NFI_ADDRNOB_REG16, 2);
++ DRV_WriteReg16(NFI_CON_REG16, 4 << CON_NFI_SEC_SHIFT);
++ if (!mtk_nand_status_ready(STA_ADDR_STATE))
++ goto error;
++ if (!mtk_nand_set_command(0xE0))
++ goto error;
++ if (!mtk_nand_status_ready(STA_NAND_BUSY))
++ goto error;
++ if (!mtk_nand_mcu_read_data(buf + spare_per_sector * sector, read_len)) {
++ printk(KERN_WARNING "mtk_nand_mcu_read_data return failed first 16\n");
++ res = -EIO;
++ goto error;
++ }
++ mtk_nand_stop_read();
++ sector++;
++ len -= read_len;
++ }
++ }
++error:
++ NFI_CLN_REG16(NFI_CON_REG16, CON_NFI_BRD);
++ return res;
++}
++
++static int
++mtk_nand_write_oob_raw(struct mtd_info *mtd, const uint8_t * buf, int page_addr, int len)
++{
++ struct nand_chip *chip = mtd->priv;
++ u32 col_addr = 0;
++ u32 sector = 0;
++ int write_len = 0;
++ int status;
++ int sec_num = 1<<(chip->page_shift-9);
++ int spare_per_sector = mtd->oobsize/sec_num;
++
++ if (len > NAND_MAX_OOBSIZE || len % OOB_AVAI_PER_SECTOR || !buf) {
++ printk(KERN_WARNING "[%s] invalid parameter, len: %d, buf: %p\n", __FUNCTION__, len, buf);
++ return -EINVAL;
++ }
++
++ while (len > 0) {
++ write_len = min(len, spare_per_sector);
++ col_addr = sector * (NAND_SECTOR_SIZE + spare_per_sector) + NAND_SECTOR_SIZE;
++ if (!mtk_nand_ready_for_write(chip, page_addr, col_addr, false, NULL))
++ return -EIO;
++ if (!mtk_nand_mcu_write_data(mtd, buf + sector * spare_per_sector, write_len))
++ return -EIO;
++ (void)mtk_nand_check_RW_count(write_len);
++ NFI_CLN_REG16(NFI_CON_REG16, CON_NFI_BWR);
++ (void)mtk_nand_set_command(NAND_CMD_PAGEPROG);
++ while (DRV_Reg32(NFI_STA_REG32) & STA_NAND_BUSY)
++ ;
++ status = chip->waitfunc(mtd, chip);
++ if (status & NAND_STATUS_FAIL) {
++ printk(KERN_INFO "status: %d\n", status);
++ return -EIO;
++ }
++ len -= write_len;
++ sector++;
++ }
++
++ return 0;
++}
++
++static int
++mtk_nand_write_oob_hw(struct mtd_info *mtd, struct nand_chip *chip, int page)
++{
++ int i, iter;
++ int sec_num = 1<<(chip->page_shift-9);
++ int spare_per_sector = mtd->oobsize/sec_num;
++
++ memcpy(local_oob_buf, chip->oob_poi, mtd->oobsize);
++
++ // copy ecc data
++ for (i = 0; i < chip->ecc.layout->eccbytes; i++) {
++ iter = (i / (spare_per_sector-OOB_AVAI_PER_SECTOR)) * spare_per_sector + OOB_AVAI_PER_SECTOR + i % (spare_per_sector-OOB_AVAI_PER_SECTOR);
++ local_oob_buf[iter] = chip->oob_poi[chip->ecc.layout->eccpos[i]];
++ }
++
++ // copy FDM data
++ for (i = 0; i < sec_num; i++)
++ memcpy(&local_oob_buf[i * spare_per_sector], &chip->oob_poi[i * OOB_AVAI_PER_SECTOR], OOB_AVAI_PER_SECTOR);
++
++ return mtk_nand_write_oob_raw(mtd, local_oob_buf, page, mtd->oobsize);
++}
++
++static int mtk_nand_write_oob(struct mtd_info *mtd, struct nand_chip *chip, int page)
++{
++ int page_per_block = 1 << (chip->phys_erase_shift - chip->page_shift);
++ int block = page / page_per_block;
++ u16 page_in_block = page % page_per_block;
++ int mapped_block = block;
++
++#if defined(MTK_NAND_BMT)
++ mapped_block = get_mapping_block_index(block);
++ // write bad index into oob
++ if (mapped_block != block)
++ set_bad_index_to_oob(chip->oob_poi, block);
++ else
++ set_bad_index_to_oob(chip->oob_poi, FAKE_INDEX);
++#else
++ if (shift_on_bbt)
++ {
++ mapped_block = block_remap(mtd, block);
++ if (mapped_block == -1)
++ return NAND_STATUS_FAIL;
++ if (nand_bbt_get(mtd, mapped_block << (chip->phys_erase_shift - chip->page_shift)) != 0x0)
++ return NAND_STATUS_FAIL;
++ }
++#endif
++ do {
++ if (mtk_nand_write_oob_hw(mtd, chip, page_in_block + mapped_block * page_per_block /* page */)) {
++ MSG(INIT, "write oob fail at block: 0x%x, page: 0x%x\n", mapped_block, page_in_block);
++#if defined(MTK_NAND_BMT)
++ if (update_bmt((page_in_block + mapped_block * page_per_block) << chip->page_shift,
++ UPDATE_WRITE_FAIL, NULL, chip->oob_poi))
++ {
++ MSG(INIT, "Update BMT success\n");
++ return 0;
++ } else {
++ MSG(INIT, "Update BMT fail\n");
++ return -EIO;
++ }
++#else
++ mtk_nand_block_markbad_hw(mtd, (page_in_block + mapped_block * page_per_block) << chip->page_shift);
++ nand_bbt_set(mtd, page_in_block + mapped_block * page_per_block, 0x3);
++ if (shift_on_bbt) {
++ mapped_block = block_remap(mtd, mapped_block);
++ if (mapped_block == -1)
++ return NAND_STATUS_FAIL;
++ if (nand_bbt_get(mtd, mapped_block << (chip->phys_erase_shift - chip->page_shift)) != 0x0)
++ return NAND_STATUS_FAIL;
++ } else {
++ return NAND_STATUS_FAIL;
++ }
++#endif
++ } else
++ break;
++ } while (1);
++
++ return 0;
++}
++
++int
++mtk_nand_block_markbad_hw(struct mtd_info *mtd, loff_t offset)
++{
++ struct nand_chip *chip = mtd->priv;
++ int block = (int)offset >> chip->phys_erase_shift;
++ int page = block * (1 << (chip->phys_erase_shift - chip->page_shift));
++ u8 buf[8];
++
++ memset(buf, 0xFF, 8);
++ buf[0] = 0;
++ return mtk_nand_write_oob_raw(mtd, buf, page, 8);
++}
++
++static int
++mtk_nand_block_markbad(struct mtd_info *mtd, loff_t offset)
++{
++ struct nand_chip *chip = mtd->priv;
++ int block = (int)offset >> chip->phys_erase_shift;
++ int ret;
++ int mapped_block = block;
++
++ nand_get_device(chip, mtd, FL_WRITING);
++
++#if defined(MTK_NAND_BMT)
++ mapped_block = get_mapping_block_index(block);
++ ret = mtk_nand_block_markbad_hw(mtd, mapped_block << chip->phys_erase_shift);
++#else
++ if (shift_on_bbt) {
++ mapped_block = block_remap(mtd, block);
++ if (mapped_block == -1) {
++ printk("NAND mark bad failed\n");
++ nand_release_device(mtd);
++ return NAND_STATUS_FAIL;
++ }
++ }
++ ret = mtk_nand_block_markbad_hw(mtd, mapped_block << chip->phys_erase_shift);
++#endif
++ nand_release_device(mtd);
++
++ return ret;
++}
++
++int
++mtk_nand_read_oob_hw(struct mtd_info *mtd, struct nand_chip *chip, int page)
++{
++ int i;
++ u8 iter = 0;
++
++ int sec_num = 1<<(chip->page_shift-9);
++ int spare_per_sector = mtd->oobsize/sec_num;
++
++ if (mtk_nand_read_oob_raw(mtd, chip->oob_poi, page, mtd->oobsize)) {
++ printk(KERN_ERR "[%s]mtk_nand_read_oob_raw return failed\n", __FUNCTION__);
++ return -EIO;
++ }
++
++ // adjust to ecc physical layout to memory layout
++ /*********************************************************/
++ /* FDM0 | ECC0 | FDM1 | ECC1 | FDM2 | ECC2 | FDM3 | ECC3 */
++ /* 8B | 8B | 8B | 8B | 8B | 8B | 8B | 8B */
++ /*********************************************************/
++
++ memcpy(local_oob_buf, chip->oob_poi, mtd->oobsize);
++ // copy ecc data
++ for (i = 0; i < chip->ecc.layout->eccbytes; i++) {
++ iter = (i / (spare_per_sector-OOB_AVAI_PER_SECTOR)) * spare_per_sector + OOB_AVAI_PER_SECTOR + i % (spare_per_sector-OOB_AVAI_PER_SECTOR);
++ chip->oob_poi[chip->ecc.layout->eccpos[i]] = local_oob_buf[iter];
++ }
++
++ // copy FDM data
++ for (i = 0; i < sec_num; i++) {
++ memcpy(&chip->oob_poi[i * OOB_AVAI_PER_SECTOR], &local_oob_buf[i * spare_per_sector], OOB_AVAI_PER_SECTOR);
++ }
++
++ return 0;
++}
++
++static int
++mtk_nand_read_oob(struct mtd_info *mtd, struct nand_chip *chip, int page)
++{
++ int page_per_block = 1 << (chip->phys_erase_shift - chip->page_shift);
++ int block = page / page_per_block;
++ u16 page_in_block = page % page_per_block;
++ int mapped_block = block;
++
++#if defined (MTK_NAND_BMT)
++ mapped_block = get_mapping_block_index(block);
++ mtk_nand_read_oob_hw(mtd, chip, page_in_block + mapped_block * page_per_block);
++#else
++ if (shift_on_bbt) {
++ mapped_block = block_remap(mtd, block);
++ if (mapped_block == -1)
++ return NAND_STATUS_FAIL;
++ // allow to read oob even if the block is bad
++ }
++ if (mtk_nand_read_oob_hw(mtd, chip, page_in_block + mapped_block * page_per_block)!=0)
++ return -1;
++#endif
++ return 0;
++}
++
++int
++mtk_nand_block_bad_hw(struct mtd_info *mtd, loff_t ofs)
++{
++ struct nand_chip *chip = (struct nand_chip *)mtd->priv;
++ int page_addr = (int)(ofs >> chip->page_shift);
++ unsigned int page_per_block = 1 << (chip->phys_erase_shift - chip->page_shift);
++ unsigned char oob_buf[8];
++
++ page_addr &= ~(page_per_block - 1);
++ if (mtk_nand_read_oob_raw(mtd, oob_buf, page_addr, sizeof(oob_buf))) {
++ printk(KERN_WARNING "mtk_nand_read_oob_raw return error\n");
++ return 1;
++ }
++
++ if (oob_buf[0] != 0xff) {
++ printk(KERN_WARNING "Bad block detected at 0x%x, oob_buf[0] is 0x%x\n", page_addr, oob_buf[0]);
++ // dump_nfi();
++ return 1;
++ }
++
++ return 0;
++}
++
++static int
++mtk_nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
++{
++ int chipnr = 0;
++ struct nand_chip *chip = (struct nand_chip *)mtd->priv;
++ int block = (int)ofs >> chip->phys_erase_shift;
++ int mapped_block = block;
++ int ret;
++
++ if (getchip) {
++ chipnr = (int)(ofs >> chip->chip_shift);
++ nand_get_device(chip, mtd, FL_READING);
++ /* Select the NAND device */
++ chip->select_chip(mtd, chipnr);
++ }
++
++#if defined(MTK_NAND_BMT)
++ mapped_block = get_mapping_block_index(block);
++#else
++ if (shift_on_bbt) {
++ mapped_block = block_remap(mtd, block);
++ if (mapped_block == -1) {
++ if (getchip)
++ nand_release_device(mtd);
++ return NAND_STATUS_FAIL;
++ }
++ }
++#endif
++
++ ret = mtk_nand_block_bad_hw(mtd, mapped_block << chip->phys_erase_shift);
++#if defined (MTK_NAND_BMT)
++ if (ret) {
++ MSG(INIT, "Unmapped bad block: 0x%x\n", mapped_block);
++ if (update_bmt(mapped_block << chip->phys_erase_shift, UPDATE_UNMAPPED_BLOCK, NULL, NULL)) {
++ MSG(INIT, "Update BMT success\n");
++ ret = 0;
++ } else {
++ MSG(INIT, "Update BMT fail\n");
++ ret = 1;
++ }
++ }
++#endif
++
++ if (getchip)
++ nand_release_device(mtd);
++
++ return ret;
++}
++
++#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
++char gacBuf[4096 + 288];
++
++static int
++mtk_nand_verify_buf(struct mtd_info *mtd, const uint8_t * buf, int len)
++{
++ struct nand_chip *chip = (struct nand_chip *)mtd->priv;
++ struct NAND_CMD *pkCMD = &g_kCMD;
++ u32 u4PageSize = mtd->writesize;
++ u32 *pSrc, *pDst;
++ int i;
++
++ mtk_nand_exec_read_page(mtd, pkCMD->u4RowAddr, u4PageSize, gacBuf, gacBuf + u4PageSize);
++
++ pSrc = (u32 *) buf;
++ pDst = (u32 *) gacBuf;
++ len = len / sizeof(u32);
++ for (i = 0; i < len; ++i) {
++ if (*pSrc != *pDst) {
++ MSG(VERIFY, "mtk_nand_verify_buf page fail at page %d\n", pkCMD->u4RowAddr);
++ return -1;
++ }
++ pSrc++;
++ pDst++;
++ }
++
++ pSrc = (u32 *) chip->oob_poi;
++ pDst = (u32 *) (gacBuf + u4PageSize);
++
++ if ((pSrc[0] != pDst[0]) || (pSrc[1] != pDst[1]) || (pSrc[2] != pDst[2]) || (pSrc[3] != pDst[3]) || (pSrc[4] != pDst[4]) || (pSrc[5] != pDst[5])) {
++ // TODO: Ask Designer Why?
++ //(pSrc[6] != pDst[6]) || (pSrc[7] != pDst[7]))
++ MSG(VERIFY, "mtk_nand_verify_buf oob fail at page %d\n", pkCMD->u4RowAddr);
++ MSG(VERIFY, "0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n", pSrc[0], pSrc[1], pSrc[2], pSrc[3], pSrc[4], pSrc[5], pSrc[6], pSrc[7]);
++ MSG(VERIFY, "0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n", pDst[0], pDst[1], pDst[2], pDst[3], pDst[4], pDst[5], pDst[6], pDst[7]);
++ return -1;
++ }
++ return 0;
++}
++#endif
++
++static void
++mtk_nand_init_hw(struct mtk_nand_host *host) {
++ struct mtk_nand_host_hw *hw = host->hw;
++ u32 data;
++
++ data = DRV_Reg32(RALINK_SYSCTL_BASE+0x60);
++ data &= ~((0x3<<18)|(0x3<<16));
++ data |= ((0x2<<18) |(0x2<<16));
++ DRV_WriteReg32(RALINK_SYSCTL_BASE+0x60, data);
++
++ MSG(INIT, "Enable NFI Clock\n");
++ nand_enable_clock();
++
++ g_bInitDone = false;
++ g_kCMD.u4OOBRowAddr = (u32) - 1;
++
++ /* Set default NFI access timing control */
++ DRV_WriteReg32(NFI_ACCCON_REG32, hw->nfi_access_timing);
++ DRV_WriteReg16(NFI_CNFG_REG16, 0);
++ DRV_WriteReg16(NFI_PAGEFMT_REG16, 0);
++
++ /* Reset the state machine and data FIFO, because flushing FIFO */
++ (void)mtk_nand_reset();
++
++ /* Set the ECC engine */
++ if (hw->nand_ecc_mode == NAND_ECC_HW) {
++ MSG(INIT, "%s : Use HW ECC\n", MODULE_NAME);
++ if (g_bHwEcc)
++ NFI_SET_REG32(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
++ ECC_Config(host->hw,4);
++ mtk_nand_configure_fdm(8);
++ mtk_nand_configure_lock();
++ }
++
++ NFI_SET_REG16(NFI_IOCON_REG16, 0x47);
++}
++
++static int mtk_nand_dev_ready(struct mtd_info *mtd)
++{
++ return !(DRV_Reg32(NFI_STA_REG32) & STA_NAND_BUSY);
++}
++
++#define FACT_BBT_BLOCK_NUM 32 // use the latest 32 BLOCK for factory bbt table
++#define FACT_BBT_OOB_SIGNATURE 1
++#define FACT_BBT_SIGNATURE_LEN 7
++const u8 oob_signature[] = "mtknand";
++static u8 *fact_bbt = 0;
++static u32 bbt_size = 0;
++
++static int
++read_fact_bbt(struct mtd_info *mtd, unsigned int page)
++{
++ struct nand_chip *chip = mtd->priv;
++
++ // read oob
++ if (mtk_nand_read_oob_hw(mtd, chip, page)==0)
++ {
++ if (chip->oob_poi[nand_badblock_offset] != 0xFF)
++ {
++ printk("Bad Block on Page %x\n", page);
++ return -1;
++ }
++ if (memcmp(&chip->oob_poi[FACT_BBT_OOB_SIGNATURE], oob_signature, FACT_BBT_SIGNATURE_LEN) != 0)
++ {
++ printk("compare signature failed %x\n", page);
++ return -1;
++ }
++ if (mtk_nand_exec_read_page(mtd, page, mtd->writesize, chip->buffers->databuf, chip->oob_poi))
++ {
++ printk("Signature matched and data read!\n");
++ memcpy(fact_bbt, chip->buffers->databuf, (bbt_size <= mtd->writesize)? bbt_size:mtd->writesize);
++ return 0;
++ }
++
++ }
++ printk("failed at page %x\n", page);
++ return -1;
++}
++
++static int
++load_fact_bbt(struct mtd_info *mtd)
++{
++ struct nand_chip *chip = mtd->priv;
++ int i;
++ u32 total_block;
++
++ total_block = 1 << (chip->chip_shift - chip->phys_erase_shift);
++ bbt_size = total_block >> 2;
++
++ if ((!fact_bbt) && (bbt_size))
++ fact_bbt = (u8 *)kmalloc(bbt_size, GFP_KERNEL);
++ if (!fact_bbt)
++ return -1;
++
++ for (i = total_block - 1; i >= (total_block - FACT_BBT_BLOCK_NUM); i--)
++ {
++ if (read_fact_bbt(mtd, i << (chip->phys_erase_shift - chip->page_shift)) == 0)
++ {
++ printk("load_fact_bbt success %d\n", i);
++ return 0;
++ }
++
++ }
++ printk("load_fact_bbt failed\n");
++ return -1;
++}
++
++static int
++mtk_nand_probe(struct platform_device *pdev)
++{
++ struct mtd_part_parser_data ppdata;
++ struct mtk_nand_host_hw *hw;
++ struct mtd_info *mtd;
++ struct nand_chip *nand_chip;
++ u8 ext_id1, ext_id2, ext_id3;
++ int err = 0;
++ int id;
++ u32 ext_id;
++ int i;
++ u32 data;
++
++ data = DRV_Reg32(RALINK_SYSCTL_BASE+0x60);
++ data &= ~((0x3<<18)|(0x3<<16));
++ data |= ((0x2<<18) |(0x2<<16));
++ DRV_WriteReg32(RALINK_SYSCTL_BASE+0x60, data);
++
++ hw = &mt7621_nand_hw,
++ BUG_ON(!hw);
++ /* Allocate memory for the device structure (and zero it) */
++ host = kzalloc(sizeof(struct mtk_nand_host), GFP_KERNEL);
++ if (!host) {
++ MSG(INIT, "mtk_nand: failed to allocate device structure.\n");
++ return -ENOMEM;
++ }
++
++ /* Allocate memory for 16 byte aligned buffer */
++ local_buffer_16_align = local_buffer + 16 - ((u32) local_buffer % 16);
++ printk(KERN_INFO "Allocate 16 byte aligned buffer: %p\n", local_buffer_16_align);
++ host->hw = hw;
++
++ /* init mtd data structure */
++ nand_chip = &host->nand_chip;
++ nand_chip->priv = host; /* link the private data structures */
++
++ mtd = &host->mtd;
++ mtd->priv = nand_chip;
++ mtd->owner = THIS_MODULE;
++ mtd->name = "MT7621-NAND";
++
++ hw->nand_ecc_mode = NAND_ECC_HW;
++
++ /* Set address of NAND IO lines */
++ nand_chip->IO_ADDR_R = (void __iomem *)NFI_DATAR_REG32;
++ nand_chip->IO_ADDR_W = (void __iomem *)NFI_DATAW_REG32;
++ nand_chip->chip_delay = 20; /* 20us command delay time */
++ nand_chip->ecc.mode = hw->nand_ecc_mode; /* enable ECC */
++ nand_chip->ecc.strength = 1;
++ nand_chip->read_byte = mtk_nand_read_byte;
++ nand_chip->read_buf = mtk_nand_read_buf;
++ nand_chip->write_buf = mtk_nand_write_buf;
++#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
++ nand_chip->verify_buf = mtk_nand_verify_buf;
++#endif
++ nand_chip->select_chip = mtk_nand_select_chip;
++ nand_chip->dev_ready = mtk_nand_dev_ready;
++ nand_chip->cmdfunc = mtk_nand_command_bp;
++ nand_chip->ecc.read_page = mtk_nand_read_page_hwecc;
++ nand_chip->ecc.write_page = mtk_nand_write_page_hwecc;
++
++ nand_chip->ecc.layout = &nand_oob_64;
++ nand_chip->ecc.size = hw->nand_ecc_size; //2048
++ nand_chip->ecc.bytes = hw->nand_ecc_bytes; //32
++
++ // For BMT, we need to revise driver architecture
++ nand_chip->write_page = mtk_nand_write_page;
++ nand_chip->ecc.write_oob = mtk_nand_write_oob;
++ nand_chip->block_markbad = mtk_nand_block_markbad; // need to add nand_get_device()/nand_release_device().
++ // nand_chip->erase = mtk_nand_erase;
++ // nand_chip->read_page = mtk_nand_read_page;
++ nand_chip->ecc.read_oob = mtk_nand_read_oob;
++ nand_chip->block_bad = mtk_nand_block_bad;
++
++ //Qwert:Add for Uboot
++ mtk_nand_init_hw(host);
++ /* Select the device */
++ nand_chip->select_chip(mtd, NFI_DEFAULT_CS);
++
++ /*
++ * Reset the chip, required by some chips (e.g. Micron MT29FxGxxxxx)
++ * after power-up
++ */
++ nand_chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
++
++ memset(&devinfo, 0 , sizeof(flashdev_info));
++
++ /* Send the command for reading device ID */
++
++ nand_chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
++
++ /* Read manufacturer and device IDs */
++ manu_id = nand_chip->read_byte(mtd);
++ dev_id = nand_chip->read_byte(mtd);
++ id = dev_id | (manu_id << 8);
++ ext_id1 = nand_chip->read_byte(mtd);
++ ext_id2 = nand_chip->read_byte(mtd);
++ ext_id3 = nand_chip->read_byte(mtd);
++ ext_id = ext_id1 << 16 | ext_id2 << 8 | ext_id3;
++ if (!get_device_info(id, ext_id, &devinfo)) {
++ u32 chip_mode = RALINK_REG(RALINK_SYSCTL_BASE+0x010)&0x0F;
++ MSG(INIT, "Not Support this Device! \r\n");
++ memset(&devinfo, 0 , sizeof(flashdev_info));
++ MSG(INIT, "chip_mode=%08X\n",chip_mode);
++
++ /* apply bootstrap first */
++ devinfo.addr_cycle = 5;
++ devinfo.iowidth = 8;
++
++ switch (chip_mode) {
++ case 10:
++ devinfo.pagesize = 2048;
++ devinfo.sparesize = 128;
++ devinfo.totalsize = 128;
++ devinfo.blocksize = 128;
++ break;
++ case 11:
++ devinfo.pagesize = 4096;
++ devinfo.sparesize = 128;
++ devinfo.totalsize = 1024;
++ devinfo.blocksize = 256;
++ break;
++ case 12:
++ devinfo.pagesize = 4096;
++ devinfo.sparesize = 224;
++ devinfo.totalsize = 2048;
++ devinfo.blocksize = 512;
++ break;
++ default:
++ case 1:
++ devinfo.pagesize = 2048;
++ devinfo.sparesize = 64;
++ devinfo.totalsize = 128;
++ devinfo.blocksize = 128;
++ break;
++ }
++
++ devinfo.timmingsetting = NFI_DEFAULT_ACCESS_TIMING;
++ devinfo.devciename[0] = 'U';
++ devinfo.advancedmode = 0;
++ }
++ mtd->writesize = devinfo.pagesize;
++ mtd->erasesize = (devinfo.blocksize<<10);
++ mtd->oobsize = devinfo.sparesize;
++
++ nand_chip->chipsize = (devinfo.totalsize<<20);
++ nand_chip->page_shift = ffs(mtd->writesize) - 1;
++ nand_chip->pagemask = (nand_chip->chipsize >> nand_chip->page_shift) - 1;
++ nand_chip->phys_erase_shift = ffs(mtd->erasesize) - 1;
++ nand_chip->chip_shift = ffs(nand_chip->chipsize) - 1;//0x1C;//ffs(nand_chip->chipsize) - 1;
++ nand_chip->oob_poi = nand_chip->buffers->databuf + mtd->writesize;
++ nand_chip->badblockpos = 0;
++
++ if (devinfo.pagesize == 4096)
++ nand_chip->ecc.layout = &nand_oob_128;
++ else if (devinfo.pagesize == 2048)
++ nand_chip->ecc.layout = &nand_oob_64;
++ else if (devinfo.pagesize == 512)
++ nand_chip->ecc.layout = &nand_oob_16;
++
++ nand_chip->ecc.layout->eccbytes = devinfo.sparesize-OOB_AVAI_PER_SECTOR*(devinfo.pagesize/NAND_SECTOR_SIZE);
++ for (i = 0; i < nand_chip->ecc.layout->eccbytes; i++)
++ nand_chip->ecc.layout->eccpos[i]=OOB_AVAI_PER_SECTOR*(devinfo.pagesize/NAND_SECTOR_SIZE)+i;
++
++ MSG(INIT, "Support this Device in MTK table! %x \r\n", id);
++ hw->nfi_bus_width = devinfo.iowidth;
++ DRV_WriteReg32(NFI_ACCCON_REG32, devinfo.timmingsetting);
++
++ /* 16-bit bus width */
++ if (hw->nfi_bus_width == 16) {
++ MSG(INIT, "%s : Set the 16-bit I/O settings!\n", MODULE_NAME);
++ nand_chip->options |= NAND_BUSWIDTH_16;
++ }
++ mtd->oobsize = devinfo.sparesize;
++ hw->nfi_cs_num = 1;
++
++ /* Scan to find existance of the device */
++ if (nand_scan(mtd, hw->nfi_cs_num)) {
++ MSG(INIT, "%s : nand_scan fail.\n", MODULE_NAME);
++ err = -ENXIO;
++ goto out;
++ }
++
++ g_page_size = mtd->writesize;
++ platform_set_drvdata(pdev, host);
++ if (hw->nfi_bus_width == 16) {
++ NFI_SET_REG16(NFI_PAGEFMT_REG16, PAGEFMT_DBYTE_EN);
++ }
++
++ nand_chip->select_chip(mtd, 0);
++#if defined(MTK_NAND_BMT)
++ nand_chip->chipsize -= (BMT_POOL_SIZE) << nand_chip->phys_erase_shift;
++#endif
++ mtd->size = nand_chip->chipsize;
++
++ CFG_BLOCKSIZE = mtd->erasesize;
++
++#if defined(MTK_NAND_BMT)
++ if (!g_bmt) {
++ if (!(g_bmt = init_bmt(nand_chip, BMT_POOL_SIZE))) {
++ MSG(INIT, "Error: init bmt failed\n");
++ return 0;
++ }
++ }
++#endif
++
++ ppdata.of_node = pdev->dev.of_node;
++ err = mtd_device_parse_register(mtd, probe_types, &ppdata,
++ NULL, 0);
++ if (!err) {
++ MSG(INIT, "[mtk_nand] probe successfully!\n");
++ nand_disable_clock();
++ shift_on_bbt = 1;
++ if (load_fact_bbt(mtd) == 0) {
++ int i;
++ for (i = 0; i < 0x100; i++)
++ nand_chip->bbt[i] |= fact_bbt[i];
++ }
++
++ return err;
++ }
++
++out:
++ MSG(INIT, "[NFI] mtk_nand_probe fail, err = %d!\n", err);
++ nand_release(mtd);
++ platform_set_drvdata(pdev, NULL);
++ kfree(host);
++ nand_disable_clock();
++ return err;
++}
++
++static int
++mtk_nand_remove(struct platform_device *pdev)
++{
++ struct mtk_nand_host *host = platform_get_drvdata(pdev);
++ struct mtd_info *mtd = &host->mtd;
++
++ nand_release(mtd);
++ kfree(host);
++ nand_disable_clock();
++
++ return 0;
++}
++
++static const struct of_device_id mt7621_nand_match[] = {
++ { .compatible = "mtk,mt7621-nand" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, mt7621_nand_match);
++
++static struct platform_driver mtk_nand_driver = {
++ .probe = mtk_nand_probe,
++ .remove = mtk_nand_remove,
++ .driver = {
++ .name = "MT7621-NAND",
++ .owner = THIS_MODULE,
++ .of_match_table = mt7621_nand_match,
++ },
++};
++
++static int __init
++mtk_nand_init(void)
++{
++ printk("MediaTek Nand driver init, version %s\n", VERSION);
++
++ return platform_driver_register(&mtk_nand_driver);
++}
++
++static void __exit
++mtk_nand_exit(void)
++{
++ platform_driver_unregister(&mtk_nand_driver);
++}
++
++module_init(mtk_nand_init);
++module_exit(mtk_nand_exit);
++MODULE_LICENSE("GPL");
+diff --git a/drivers/mtd/nand/mtk_nand.h b/drivers/mtd/nand/mtk_nand.h
+new file mode 100644
+index 0000000..6db88c4
+--- /dev/null
++++ b/drivers/mtd/nand/mtk_nand.h
+@@ -0,0 +1,452 @@
++#ifndef __MTK_NAND_H
++#define __MTK_NAND_H
++
++#define RALINK_NAND_CTRL_BASE 0xBE003000
++#define RALINK_SYSCTL_BASE 0xBE000000
++#define RALINK_NANDECC_CTRL_BASE 0xBE003800
++/*******************************************************************************
++ * NFI Register Definition
++ *******************************************************************************/
++
++#define NFI_CNFG_REG16 ((volatile P_U16)(NFI_BASE+0x0000))
++#define NFI_PAGEFMT_REG16 ((volatile P_U16)(NFI_BASE+0x0004))
++#define NFI_CON_REG16 ((volatile P_U16)(NFI_BASE+0x0008))
++#define NFI_ACCCON_REG32 ((volatile P_U32)(NFI_BASE+0x000C))
++#define NFI_INTR_EN_REG16 ((volatile P_U16)(NFI_BASE+0x0010))
++#define NFI_INTR_REG16 ((volatile P_U16)(NFI_BASE+0x0014))
++
++#define NFI_CMD_REG16 ((volatile P_U16)(NFI_BASE+0x0020))
++
++#define NFI_ADDRNOB_REG16 ((volatile P_U16)(NFI_BASE+0x0030))
++#define NFI_COLADDR_REG32 ((volatile P_U32)(NFI_BASE+0x0034))
++#define NFI_ROWADDR_REG32 ((volatile P_U32)(NFI_BASE+0x0038))
++
++#define NFI_STRDATA_REG16 ((volatile P_U16)(NFI_BASE+0x0040))
++
++#define NFI_DATAW_REG32 ((volatile P_U32)(NFI_BASE+0x0050))
++#define NFI_DATAR_REG32 ((volatile P_U32)(NFI_BASE+0x0054))
++#define NFI_PIO_DIRDY_REG16 ((volatile P_U16)(NFI_BASE+0x0058))
++
++#define NFI_STA_REG32 ((volatile P_U32)(NFI_BASE+0x0060))
++#define NFI_FIFOSTA_REG16 ((volatile P_U16)(NFI_BASE+0x0064))
++#define NFI_LOCKSTA_REG16 ((volatile P_U16)(NFI_BASE+0x0068))
++
++#define NFI_ADDRCNTR_REG16 ((volatile P_U16)(NFI_BASE+0x0070))
++
++#define NFI_STRADDR_REG32 ((volatile P_U32)(NFI_BASE+0x0080))
++#define NFI_BYTELEN_REG16 ((volatile P_U16)(NFI_BASE+0x0084))
++
++#define NFI_CSEL_REG16 ((volatile P_U16)(NFI_BASE+0x0090))
++#define NFI_IOCON_REG16 ((volatile P_U16)(NFI_BASE+0x0094))
++
++#define NFI_FDM0L_REG32 ((volatile P_U32)(NFI_BASE+0x00A0))
++#define NFI_FDM0M_REG32 ((volatile P_U32)(NFI_BASE+0x00A4))
++
++#define NFI_LOCK_REG16 ((volatile P_U16)(NFI_BASE+0x0100))
++#define NFI_LOCKCON_REG32 ((volatile P_U32)(NFI_BASE+0x0104))
++#define NFI_LOCKANOB_REG16 ((volatile P_U16)(NFI_BASE+0x0108))
++#define NFI_LOCK00ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0110))
++#define NFI_LOCK00FMT_REG32 ((volatile P_U32)(NFI_BASE+0x0114))
++#define NFI_LOCK01ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0118))
++#define NFI_LOCK01FMT_REG32 ((volatile P_U32)(NFI_BASE+0x011C))
++#define NFI_LOCK02ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0120))
++#define NFI_LOCK02FMT_REG32 ((volatile P_U32)(NFI_BASE+0x0124))
++#define NFI_LOCK03ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0128))
++#define NFI_LOCK03FMT_REG32 ((volatile P_U32)(NFI_BASE+0x012C))
++#define NFI_LOCK04ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0130))
++#define NFI_LOCK04FMT_REG32 ((volatile P_U32)(NFI_BASE+0x0134))
++#define NFI_LOCK05ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0138))
++#define NFI_LOCK05FMT_REG32 ((volatile P_U32)(NFI_BASE+0x013C))
++#define NFI_LOCK06ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0140))
++#define NFI_LOCK06FMT_REG32 ((volatile P_U32)(NFI_BASE+0x0144))
++#define NFI_LOCK07ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0148))
++#define NFI_LOCK07FMT_REG32 ((volatile P_U32)(NFI_BASE+0x014C))
++#define NFI_LOCK08ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0150))
++#define NFI_LOCK08FMT_REG32 ((volatile P_U32)(NFI_BASE+0x0154))
++#define NFI_LOCK09ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0158))
++#define NFI_LOCK09FMT_REG32 ((volatile P_U32)(NFI_BASE+0x015C))
++#define NFI_LOCK10ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0160))
++#define NFI_LOCK10FMT_REG32 ((volatile P_U32)(NFI_BASE+0x0164))
++#define NFI_LOCK11ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0168))
++#define NFI_LOCK11FMT_REG32 ((volatile P_U32)(NFI_BASE+0x016C))
++#define NFI_LOCK12ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0170))
++#define NFI_LOCK12FMT_REG32 ((volatile P_U32)(NFI_BASE+0x0174))
++#define NFI_LOCK13ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0178))
++#define NFI_LOCK13FMT_REG32 ((volatile P_U32)(NFI_BASE+0x017C))
++#define NFI_LOCK14ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0180))
++#define NFI_LOCK14FMT_REG32 ((volatile P_U32)(NFI_BASE+0x0184))
++#define NFI_LOCK15ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0188))
++#define NFI_LOCK15FMT_REG32 ((volatile P_U32)(NFI_BASE+0x018C))
++
++#define NFI_FIFODATA0_REG32 ((volatile P_U32)(NFI_BASE+0x0190))
++#define NFI_FIFODATA1_REG32 ((volatile P_U32)(NFI_BASE+0x0194))
++#define NFI_FIFODATA2_REG32 ((volatile P_U32)(NFI_BASE+0x0198))
++#define NFI_FIFODATA3_REG32 ((volatile P_U32)(NFI_BASE+0x019C))
++#define NFI_MASTERSTA_REG16 ((volatile P_U16)(NFI_BASE+0x0210))
++
++
++/*******************************************************************************
++ * NFI Register Field Definition
++ *******************************************************************************/
++
++/* NFI_CNFG */
++#define CNFG_AHB (0x0001)
++#define CNFG_READ_EN (0x0002)
++#define CNFG_DMA_BURST_EN (0x0004)
++#define CNFG_BYTE_RW (0x0040)
++#define CNFG_HW_ECC_EN (0x0100)
++#define CNFG_AUTO_FMT_EN (0x0200)
++#define CNFG_OP_IDLE (0x0000)
++#define CNFG_OP_READ (0x1000)
++#define CNFG_OP_SRD (0x2000)
++#define CNFG_OP_PRGM (0x3000)
++#define CNFG_OP_ERASE (0x4000)
++#define CNFG_OP_RESET (0x5000)
++#define CNFG_OP_CUST (0x6000)
++#define CNFG_OP_MODE_MASK (0x7000)
++#define CNFG_OP_MODE_SHIFT (12)
++
++/* NFI_PAGEFMT */
++#define PAGEFMT_512 (0x0000)
++#define PAGEFMT_2K (0x0001)
++#define PAGEFMT_4K (0x0002)
++
++#define PAGEFMT_PAGE_MASK (0x0003)
++
++#define PAGEFMT_DBYTE_EN (0x0008)
++
++#define PAGEFMT_SPARE_16 (0x0000)
++#define PAGEFMT_SPARE_26 (0x0001)
++#define PAGEFMT_SPARE_27 (0x0002)
++#define PAGEFMT_SPARE_28 (0x0003)
++#define PAGEFMT_SPARE_MASK (0x0030)
++#define PAGEFMT_SPARE_SHIFT (4)
++
++#define PAGEFMT_FDM_MASK (0x0F00)
++#define PAGEFMT_FDM_SHIFT (8)
++
++#define PAGEFMT_FDM_ECC_MASK (0xF000)
++#define PAGEFMT_FDM_ECC_SHIFT (12)
++
++/* NFI_CON */
++#define CON_FIFO_FLUSH (0x0001)
++#define CON_NFI_RST (0x0002)
++#define CON_NFI_SRD (0x0010)
++
++#define CON_NFI_NOB_MASK (0x0060)
++#define CON_NFI_NOB_SHIFT (5)
++
++#define CON_NFI_BRD (0x0100)
++#define CON_NFI_BWR (0x0200)
++
++#define CON_NFI_SEC_MASK (0xF000)
++#define CON_NFI_SEC_SHIFT (12)
++
++/* NFI_ACCCON */
++#define ACCCON_SETTING ()
++
++/* NFI_INTR_EN */
++#define INTR_RD_DONE_EN (0x0001)
++#define INTR_WR_DONE_EN (0x0002)
++#define INTR_RST_DONE_EN (0x0004)
++#define INTR_ERASE_DONE_EN (0x0008)
++#define INTR_BSY_RTN_EN (0x0010)
++#define INTR_ACC_LOCK_EN (0x0020)
++#define INTR_AHB_DONE_EN (0x0040)
++#define INTR_ALL_INTR_DE (0x0000)
++#define INTR_ALL_INTR_EN (0x007F)
++
++/* NFI_INTR */
++#define INTR_RD_DONE (0x0001)
++#define INTR_WR_DONE (0x0002)
++#define INTR_RST_DONE (0x0004)
++#define INTR_ERASE_DONE (0x0008)
++#define INTR_BSY_RTN (0x0010)
++#define INTR_ACC_LOCK (0x0020)
++#define INTR_AHB_DONE (0x0040)
++
++/* NFI_ADDRNOB */
++#define ADDR_COL_NOB_MASK (0x0003)
++#define ADDR_COL_NOB_SHIFT (0)
++#define ADDR_ROW_NOB_MASK (0x0030)
++#define ADDR_ROW_NOB_SHIFT (4)
++
++/* NFI_STA */
++#define STA_READ_EMPTY (0x00001000)
++#define STA_ACC_LOCK (0x00000010)
++#define STA_CMD_STATE (0x00000001)
++#define STA_ADDR_STATE (0x00000002)
++#define STA_DATAR_STATE (0x00000004)
++#define STA_DATAW_STATE (0x00000008)
++
++#define STA_NAND_FSM_MASK (0x1F000000)
++#define STA_NAND_BUSY (0x00000100)
++#define STA_NAND_BUSY_RETURN (0x00000200)
++#define STA_NFI_FSM_MASK (0x000F0000)
++#define STA_NFI_OP_MASK (0x0000000F)
++
++/* NFI_FIFOSTA */
++#define FIFO_RD_EMPTY (0x0040)
++#define FIFO_RD_FULL (0x0080)
++#define FIFO_WR_FULL (0x8000)
++#define FIFO_WR_EMPTY (0x4000)
++#define FIFO_RD_REMAIN(x) (0x1F&(x))
++#define FIFO_WR_REMAIN(x) ((0x1F00&(x))>>8)
++
++/* NFI_ADDRCNTR */
++#define ADDRCNTR_CNTR(x) ((0xF000&(x))>>12)
++#define ADDRCNTR_OFFSET(x) (0x03FF&(x))
++
++/* NFI_LOCK */
++#define NFI_LOCK_ON (0x0001)
++
++/* NFI_LOCKANOB */
++#define PROG_RADD_NOB_MASK (0x7000)
++#define PROG_RADD_NOB_SHIFT (12)
++#define PROG_CADD_NOB_MASK (0x0300)
++#define PROG_CADD_NOB_SHIFT (8)
++#define ERASE_RADD_NOB_MASK (0x0070)
++#define ERASE_RADD_NOB_SHIFT (4)
++#define ERASE_CADD_NOB_MASK (0x0007)
++#define ERASE_CADD_NOB_SHIFT (0)
++
++/*******************************************************************************
++ * ECC Register Definition
++ *******************************************************************************/
++
++#define ECC_ENCCON_REG16 ((volatile P_U16)(NFIECC_BASE+0x0000))
++#define ECC_ENCCNFG_REG32 ((volatile P_U32)(NFIECC_BASE+0x0004))
++#define ECC_ENCDIADDR_REG32 ((volatile P_U32)(NFIECC_BASE+0x0008))
++#define ECC_ENCIDLE_REG32 ((volatile P_U32)(NFIECC_BASE+0x000C))
++#define ECC_ENCPAR0_REG32 ((volatile P_U32)(NFIECC_BASE+0x0010))
++#define ECC_ENCPAR1_REG32 ((volatile P_U32)(NFIECC_BASE+0x0014))
++#define ECC_ENCPAR2_REG32 ((volatile P_U32)(NFIECC_BASE+0x0018))
++#define ECC_ENCPAR3_REG32 ((volatile P_U32)(NFIECC_BASE+0x001C))
++#define ECC_ENCPAR4_REG32 ((volatile P_U32)(NFIECC_BASE+0x0020))
++#define ECC_ENCSTA_REG32 ((volatile P_U32)(NFIECC_BASE+0x0024))
++#define ECC_ENCIRQEN_REG16 ((volatile P_U16)(NFIECC_BASE+0x0028))
++#define ECC_ENCIRQSTA_REG16 ((volatile P_U16)(NFIECC_BASE+0x002C))
++
++#define ECC_DECCON_REG16 ((volatile P_U16)(NFIECC_BASE+0x0100))
++#define ECC_DECCNFG_REG32 ((volatile P_U32)(NFIECC_BASE+0x0104))
++#define ECC_DECDIADDR_REG32 ((volatile P_U32)(NFIECC_BASE+0x0108))
++#define ECC_DECIDLE_REG16 ((volatile P_U16)(NFIECC_BASE+0x010C))
++#define ECC_DECFER_REG16 ((volatile P_U16)(NFIECC_BASE+0x0110))
++#define ECC_DECENUM_REG32 ((volatile P_U32)(NFIECC_BASE+0x0114))
++#define ECC_DECDONE_REG16 ((volatile P_U16)(NFIECC_BASE+0x0118))
++#define ECC_DECEL0_REG32 ((volatile P_U32)(NFIECC_BASE+0x011C))
++#define ECC_DECEL1_REG32 ((volatile P_U32)(NFIECC_BASE+0x0120))
++#define ECC_DECEL2_REG32 ((volatile P_U32)(NFIECC_BASE+0x0124))
++#define ECC_DECEL3_REG32 ((volatile P_U32)(NFIECC_BASE+0x0128))
++#define ECC_DECEL4_REG32 ((volatile P_U32)(NFIECC_BASE+0x012C))
++#define ECC_DECEL5_REG32 ((volatile P_U32)(NFIECC_BASE+0x0130))
++#define ECC_DECIRQEN_REG16 ((volatile P_U16)(NFIECC_BASE+0x0134))
++#define ECC_DECIRQSTA_REG16 ((volatile P_U16)(NFIECC_BASE+0x0138))
++#define ECC_FDMADDR_REG32 ((volatile P_U32)(NFIECC_BASE+0x013C))
++#define ECC_DECFSM_REG32 ((volatile P_U32)(NFIECC_BASE+0x0140))
++#define ECC_SYNSTA_REG32 ((volatile P_U32)(NFIECC_BASE+0x0144))
++#define ECC_DECNFIDI_REG32 ((volatile P_U32)(NFIECC_BASE+0x0148))
++#define ECC_SYN0_REG32 ((volatile P_U32)(NFIECC_BASE+0x014C))
++
++/*******************************************************************************
++ * ECC register definition
++ *******************************************************************************/
++/* ECC_ENCON */
++#define ENC_EN (0x0001)
++#define ENC_DE (0x0000)
++
++/* ECC_ENCCNFG */
++#define ECC_CNFG_ECC4 (0x0000)
++#define ECC_CNFG_ECC6 (0x0001)
++#define ECC_CNFG_ECC8 (0x0002)
++#define ECC_CNFG_ECC10 (0x0003)
++#define ECC_CNFG_ECC12 (0x0004)
++#define ECC_CNFG_ECC_MASK (0x00000007)
++
++#define ENC_CNFG_NFI (0x0010)
++#define ENC_CNFG_MODE_MASK (0x0010)
++
++#define ENC_CNFG_META6 (0x10300000)
++#define ENC_CNFG_META8 (0x10400000)
++
++#define ENC_CNFG_MSG_MASK (0x1FFF0000)
++#define ENC_CNFG_MSG_SHIFT (0x10)
++
++/* ECC_ENCIDLE */
++#define ENC_IDLE (0x0001)
++
++/* ECC_ENCSTA */
++#define STA_FSM (0x001F)
++#define STA_COUNT_PS (0xFF10)
++#define STA_COUNT_MS (0x3FFF0000)
++
++/* ECC_ENCIRQEN */
++#define ENC_IRQEN (0x0001)
++
++/* ECC_ENCIRQSTA */
++#define ENC_IRQSTA (0x0001)
++
++/* ECC_DECCON */
++#define DEC_EN (0x0001)
++#define DEC_DE (0x0000)
++
++/* ECC_ENCCNFG */
++#define DEC_CNFG_ECC4 (0x0000)
++//#define DEC_CNFG_ECC6 (0x0001)
++//#define DEC_CNFG_ECC12 (0x0002)
++#define DEC_CNFG_NFI (0x0010)
++//#define DEC_CNFG_META6 (0x10300000)
++//#define DEC_CNFG_META8 (0x10400000)
++
++#define DEC_CNFG_FER (0x01000)
++#define DEC_CNFG_EL (0x02000)
++#define DEC_CNFG_CORRECT (0x03000)
++#define DEC_CNFG_TYPE_MASK (0x03000)
++
++#define DEC_CNFG_EMPTY_EN (0x80000000)
++
++#define DEC_CNFG_CODE_MASK (0x1FFF0000)
++#define DEC_CNFG_CODE_SHIFT (0x10)
++
++/* ECC_DECIDLE */
++#define DEC_IDLE (0x0001)
++
++/* ECC_DECFER */
++#define DEC_FER0 (0x0001)
++#define DEC_FER1 (0x0002)
++#define DEC_FER2 (0x0004)
++#define DEC_FER3 (0x0008)
++#define DEC_FER4 (0x0010)
++#define DEC_FER5 (0x0020)
++#define DEC_FER6 (0x0040)
++#define DEC_FER7 (0x0080)
++
++/* ECC_DECENUM */
++#define ERR_NUM0 (0x0000000F)
++#define ERR_NUM1 (0x000000F0)
++#define ERR_NUM2 (0x00000F00)
++#define ERR_NUM3 (0x0000F000)
++#define ERR_NUM4 (0x000F0000)
++#define ERR_NUM5 (0x00F00000)
++#define ERR_NUM6 (0x0F000000)
++#define ERR_NUM7 (0xF0000000)
++
++/* ECC_DECDONE */
++#define DEC_DONE0 (0x0001)
++#define DEC_DONE1 (0x0002)
++#define DEC_DONE2 (0x0004)
++#define DEC_DONE3 (0x0008)
++#define DEC_DONE4 (0x0010)
++#define DEC_DONE5 (0x0020)
++#define DEC_DONE6 (0x0040)
++#define DEC_DONE7 (0x0080)
++
++/* ECC_DECIRQEN */
++#define DEC_IRQEN (0x0001)
++
++/* ECC_DECIRQSTA */
++#define DEC_IRQSTA (0x0001)
++
++#define CHIPVER_ECO_1 (0x8a00)
++#define CHIPVER_ECO_2 (0x8a01)
++
++//#define NAND_PFM
++
++/*******************************************************************************
++ * Data Structure Definition
++ *******************************************************************************/
++struct mtk_nand_host
++{
++ struct nand_chip nand_chip;
++ struct mtd_info mtd;
++ struct mtk_nand_host_hw *hw;
++};
++
++struct NAND_CMD
++{
++ u32 u4ColAddr;
++ u32 u4RowAddr;
++ u32 u4OOBRowAddr;
++ u8 au1OOB[288];
++ u8* pDataBuf;
++#ifdef NAND_PFM
++ u32 pureReadOOB;
++ u32 pureReadOOBNum;
++#endif
++};
++
++/*
++ * ECC layout control structure. Exported to userspace for
++ * diagnosis and to allow creation of raw images
++struct nand_ecclayout {
++ uint32_t eccbytes;
++ uint32_t eccpos[64];
++ uint32_t oobavail;
++ struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES];
++};
++*/
++#define __DEBUG_NAND 1 /* Debug information on/off */
++
++/* Debug message event */
++#define DBG_EVT_NONE 0x00000000 /* No event */
++#define DBG_EVT_INIT 0x00000001 /* Initial related event */
++#define DBG_EVT_VERIFY 0x00000002 /* Verify buffer related event */
++#define DBG_EVT_PERFORMANCE 0x00000004 /* Performance related event */
++#define DBG_EVT_READ 0x00000008 /* Read related event */
++#define DBG_EVT_WRITE 0x00000010 /* Write related event */
++#define DBG_EVT_ERASE 0x00000020 /* Erase related event */
++#define DBG_EVT_BADBLOCK 0x00000040 /* Badblock related event */
++#define DBG_EVT_POWERCTL 0x00000080 /* Suspend/Resume related event */
++
++#define DBG_EVT_ALL 0xffffffff
++
++#define DBG_EVT_MASK (DBG_EVT_INIT)
++
++#if __DEBUG_NAND
++#define MSG(evt, fmt, args...) \
++do { \
++ if ((DBG_EVT_##evt) & DBG_EVT_MASK) { \
++ printk(fmt, ##args); \
++ } \
++} while(0)
++
++#define MSG_FUNC_ENTRY(f) MSG(FUC, "<FUN_ENT>: %s\n", __FUNCTION__)
++#else
++#define MSG(evt, fmt, args...) do{}while(0)
++#define MSG_FUNC_ENTRY(f) do{}while(0)
++#endif
++
++#define RAMDOM_READ 1<<0
++#define CACHE_READ 1<<1
++
++typedef struct
++{
++ u16 id; //deviceid+menuid
++ u32 ext_id;
++ u8 addr_cycle;
++ u8 iowidth;
++ u16 totalsize;
++ u16 blocksize;
++ u16 pagesize;
++ u16 sparesize;
++ u32 timmingsetting;
++ char devciename[14];
++ u32 advancedmode; //
++}flashdev_info,*pflashdev_info;
++
++/* NAND driver */
++#if 0
++struct mtk_nand_host_hw {
++ unsigned int nfi_bus_width; /* NFI_BUS_WIDTH */
++ unsigned int nfi_access_timing; /* NFI_ACCESS_TIMING */
++ unsigned int nfi_cs_num; /* NFI_CS_NUM */
++ unsigned int nand_sec_size; /* NAND_SECTOR_SIZE */
++ unsigned int nand_sec_shift; /* NAND_SECTOR_SHIFT */
++ unsigned int nand_ecc_size;
++ unsigned int nand_ecc_bytes;
++ unsigned int nand_ecc_mode;
++};
++extern struct mtk_nand_host_hw mt7621_nand_hw;
++extern u32 CFG_BLOCKSIZE;
++#endif
++#endif
+diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
+index 9715a7b..86e2a12 100644
+--- a/drivers/mtd/nand/nand_base.c
++++ b/drivers/mtd/nand/nand_base.c
+@@ -92,7 +92,7 @@ static struct nand_ecclayout nand_oob_128 = {
+ .length = 78} }
+ };
+
+-static int nand_get_device(struct mtd_info *mtd, int new_state);
++int nand_get_device(struct mtd_info *mtd, int new_state);
+
+ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
+ struct mtd_oob_ops *ops);
+@@ -130,7 +130,7 @@ static int check_offs_len(struct mtd_info *mtd,
+ *
+ * Release chip lock and wake up anyone waiting on the device.
+ */
+-static void nand_release_device(struct mtd_info *mtd)
++void nand_release_device(struct mtd_info *mtd)
+ {
+ struct nand_chip *chip = mtd->priv;
+
+@@ -783,7 +783,7 @@ static void panic_nand_get_device(struct nand_chip *chip,
+ *
+ * Get the device and lock it for exclusive access
+ */
+-static int
++int
+ nand_get_device(struct mtd_info *mtd, int new_state)
+ {
+ struct nand_chip *chip = mtd->priv;
+diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
+index c0615d1..b34cb41 100644
+--- a/drivers/mtd/nand/nand_bbt.c
++++ b/drivers/mtd/nand/nand_bbt.c
+@@ -1360,4 +1360,23 @@ int nand_markbad_bbt(struct mtd_info *mtd, loff_t offs)
+ return ret;
+ }
+
++void nand_bbt_set(struct mtd_info *mtd, int page, int flag)
++{
++ struct nand_chip *this = mtd->priv;
++ int block;
++
++ block = (int)(page >> (this->bbt_erase_shift - this->page_shift - 1));
++ this->bbt[block >> 3] &= ~(0x03 << (block & 0x6));
++ this->bbt[block >> 3] |= (flag & 0x3) << (block & 0x6);
++}
++
++int nand_bbt_get(struct mtd_info *mtd, int page)
++{
++ struct nand_chip *this = mtd->priv;
++ int block;
++
++ block = (int)(page >> (this->bbt_erase_shift - this->page_shift - 1));
++ return (this->bbt[block >> 3] >> (block & 0x06)) & 0x03;
++}
++
+ EXPORT_SYMBOL(nand_scan_bbt);
+diff --git a/drivers/mtd/nand/nand_def.h b/drivers/mtd/nand/nand_def.h
+new file mode 100644
+index 0000000..82e957d
+--- /dev/null
++++ b/drivers/mtd/nand/nand_def.h
+@@ -0,0 +1,123 @@
++#ifndef __NAND_DEF_H__
++#define __NAND_DEF_H__
++
++#define VERSION "v2.1 Fix AHB virt2phys error"
++#define MODULE_NAME "# MTK NAND #"
++#define PROCNAME "driver/nand"
++
++#undef TESTTIME
++//#define __UBOOT_NAND__ 1
++#define __KERNEL_NAND__ 1
++//#define __PRELOADER_NAND__ 1
++//#define PMT 1
++//#define _MTK_NAND_DUMMY_DRIVER
++//#define CONFIG_BADBLOCK_CHECK 1
++//#ifdef CONFIG_BADBLOCK_CHECK
++//#define MTK_NAND_BMT 1
++//#endif
++#define ECC_ENABLE 1
++#define MANUAL_CORRECT 1
++//#define __INTERNAL_USE_AHB_MODE__ (0)
++#define SKIP_BAD_BLOCK
++#define FACT_BBT
++
++#ifndef NAND_OTP_SUPPORT
++#define NAND_OTP_SUPPORT 0
++#endif
++
++/*******************************************************************************
++ * Macro definition
++ *******************************************************************************/
++//#define NFI_SET_REG32(reg, value) (DRV_WriteReg32(reg, DRV_Reg32(reg) | (value)))
++//#define NFI_SET_REG16(reg, value) (DRV_WriteReg16(reg, DRV_Reg16(reg) | (value)))
++//#define NFI_CLN_REG32(reg, value) (DRV_WriteReg32(reg, DRV_Reg32(reg) & (~(value))))
++//#define NFI_CLN_REG16(reg, value) (DRV_WriteReg16(reg, DRV_Reg16(reg) & (~(value))))
++
++#if defined (__KERNEL_NAND__)
++#define NFI_SET_REG32(reg, value) \
++do { \
++ g_value = (DRV_Reg32(reg) | (value));\
++ DRV_WriteReg32(reg, g_value); \
++} while(0)
++
++#define NFI_SET_REG16(reg, value) \
++do { \
++ g_value = (DRV_Reg16(reg) | (value));\
++ DRV_WriteReg16(reg, g_value); \
++} while(0)
++
++#define NFI_CLN_REG32(reg, value) \
++do { \
++ g_value = (DRV_Reg32(reg) & (~(value)));\
++ DRV_WriteReg32(reg, g_value); \
++} while(0)
++
++#define NFI_CLN_REG16(reg, value) \
++do { \
++ g_value = (DRV_Reg16(reg) & (~(value)));\
++ DRV_WriteReg16(reg, g_value); \
++} while(0)
++#endif
++
++#define NFI_WAIT_STATE_DONE(state) do{;}while (__raw_readl(NFI_STA_REG32) & state)
++#define NFI_WAIT_TO_READY() do{;}while (!(__raw_readl(NFI_STA_REG32) & STA_BUSY2READY))
++
++
++#define NAND_SECTOR_SIZE (512)
++#define OOB_PER_SECTOR (16)
++#define OOB_AVAI_PER_SECTOR (8)
++
++#ifndef PART_SIZE_BMTPOOL
++#define BMT_POOL_SIZE (80)
++#else
++#define BMT_POOL_SIZE (PART_SIZE_BMTPOOL)
++#endif
++
++#define PMT_POOL_SIZE (2)
++
++#define TIMEOUT_1 0x1fff
++#define TIMEOUT_2 0x8ff
++#define TIMEOUT_3 0xffff
++#define TIMEOUT_4 0xffff//5000 //PIO
++
++
++/* temporarity definiation */
++#if !defined (__KERNEL_NAND__)
++#define KERN_INFO
++#define KERN_WARNING
++#define KERN_ERR
++#define PAGE_SIZE (4096)
++#endif
++#define AddStorageTrace //AddStorageTrace
++#define STORAGE_LOGGER_MSG_NAND 0
++#define NFI_BASE RALINK_NAND_CTRL_BASE
++#define NFIECC_BASE RALINK_NANDECC_CTRL_BASE
++
++#ifdef __INTERNAL_USE_AHB_MODE__
++#define MT65xx_POLARITY_LOW 0
++#define MT65XX_PDN_PERI_NFI 0
++#define MT65xx_EDGE_SENSITIVE 0
++#define MT6575_NFI_IRQ_ID (58)
++#endif
++
++#if defined (__KERNEL_NAND__)
++#define RALINK_REG(x) (*((volatile u32 *)(x)))
++#define __virt_to_phys(x) virt_to_phys((volatile void*)x)
++#else
++#define CONFIG_MTD_NAND_VERIFY_WRITE (1)
++#define printk printf
++#define ra_dbg printf
++#define BUG() //BUG()
++#define BUG_ON(x) //BUG_ON()
++#define NUM_PARTITIONS 1
++#endif
++
++#define NFI_DEFAULT_ACCESS_TIMING (0x30C77fff) //(0x44333)
++
++//uboot only support 1 cs
++#define NFI_CS_NUM (1)
++#define NFI_DEFAULT_CS (0)
++
++#include "mt6575_typedefs.h"
++
++#endif /* __NAND_DEF_H__ */
+diff --git a/drivers/mtd/nand/nand_device_list.h b/drivers/mtd/nand/nand_device_list.h
+new file mode 100644
+index 0000000..4c36b3a
+--- /dev/null
++++ b/drivers/mtd/nand/nand_device_list.h
+@@ -0,0 +1,55 @@
++/* Copyright Statement:
++ *
++ * This software/firmware and related documentation ("MediaTek Software") are
++ * protected under relevant copyright laws. The information contained herein
++ * is confidential and proprietary to MediaTek Inc. and/or its licensors.
++ * Without the prior written permission of MediaTek inc. and/or its licensors,
++ * any reproduction, modification, use or disclosure of MediaTek Software,
++ * and information contained herein, in whole or in part, shall be strictly prohibited.
++ */
++/* MediaTek Inc. (C) 2010. All rights reserved.
++ *
++ * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
++ * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
++ * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON
++ * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
++ * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
++ * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
++ * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH
++ * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES
++ * THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES
++ * CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK
++ * SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
++ * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND
++ * CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
++ * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
++ * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO
++ * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
++ *
++ * The following software/firmware and/or related documentation ("MediaTek Software")
++ * have been modified by MediaTek Inc. All revisions are subject to any receiver's
++ * applicable license agreements with MediaTek Inc.
++ */
++
++#ifndef __NAND_DEVICE_LIST_H__
++#define __NAND_DEVICE_LIST_H__
++
++static const flashdev_info gen_FlashTable[]={
++ {0x20BC, 0x105554, 5, 16, 512, 128, 2048, 64, 0x1123, "EHD013151MA_5", 0},
++ {0xECBC, 0x005554, 5, 16, 512, 128, 2048, 64, 0x1123, "K524G2GACB_A0", 0},
++ {0x2CBC, 0x905556, 5, 16, 512, 128, 2048, 64, 0x21044333, "MT29C4G96MAZA", 0},
++ {0xADBC, 0x905554, 5, 16, 512, 128, 2048, 64, 0x10801011, "H9DA4GH4JJAMC", 0},
++ {0x01F1, 0x801D01, 4, 8, 128, 128, 2048, 64, 0x30C77fff, "S34ML01G100TF", 0},
++ {0x92F1, 0x8095FF, 4, 8, 128, 128, 2048, 64, 0x30C77fff, "F59L1G81A", 0},
++ {0xECD3, 0x519558, 5, 8, 1024, 128, 2048, 64, 0x44333, "K9K8G8000", 0},
++ {0xC2F1, 0x801DC2, 4, 8, 128, 128, 2048, 64, 0x30C77fff, "MX30LF1G08AA", 0},
++ {0x98D3, 0x902676, 5, 8, 1024, 256, 4096, 224, 0x00C25332, "TC58NVG3S0F", 0},
++ {0x01DA, 0x909546, 5, 8, 256, 128, 2048, 128, 0x30C77fff, "S34ML02G200TF", 0},
++ {0x01DC, 0x909556, 5, 8, 512, 128, 2048, 128, 0x30C77fff, "S34ML04G200TF", 0},
++ {0x0000, 0x000000, 0, 0, 0, 0, 0, 0, 0, "xxxxxxxxxx", 0},
++};
++
++
++#endif
+diff --git a/drivers/mtd/nand/partition.h b/drivers/mtd/nand/partition.h
+new file mode 100644
+index 0000000..034e1af
+--- /dev/null
++++ b/drivers/mtd/nand/partition.h
+@@ -0,0 +1,115 @@
++/* Copyright Statement:
++ *
++ * This software/firmware and related documentation ("MediaTek Software") are
++ * protected under relevant copyright laws. The information contained herein
++ * is confidential and proprietary to MediaTek Inc. and/or its licensors.
++ * Without the prior written permission of MediaTek inc. and/or its licensors,
++ * any reproduction, modification, use or disclosure of MediaTek Software,
++ * and information contained herein, in whole or in part, shall be strictly prohibited.
++ */
++/* MediaTek Inc. (C) 2010. All rights reserved.
++ *
++ * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
++ * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
++ * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON
++ * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
++ * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
++ * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
++ * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH
++ * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES
++ * THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES
++ * CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK
++ * SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
++ * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND
++ * CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
++ * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
++ * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO
++ * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
++ *
++ * The following software/firmware and/or related documentation ("MediaTek Software")
++ * have been modified by MediaTek Inc. All revisions are subject to any receiver's
++ * applicable license agreements with MediaTek Inc.
++ */
++
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/nand.h>
++#include <linux/mtd/partitions.h>
++
++#define RECONFIG_PARTITION_SIZE 1
++
++#define MTD_BOOT_PART_SIZE 0x80000
++#define MTD_CONFIG_PART_SIZE 0x20000
++#define MTD_FACTORY_PART_SIZE 0x20000
++
++extern unsigned int CFG_BLOCKSIZE;
++#define LARGE_MTD_BOOT_PART_SIZE (CFG_BLOCKSIZE<<2)
++#define LARGE_MTD_CONFIG_PART_SIZE (CFG_BLOCKSIZE<<2)
++#define LARGE_MTD_FACTORY_PART_SIZE (CFG_BLOCKSIZE<<1)
++
++/*=======================================================================*/
++/* NAND PARTITION Mapping */
++/*=======================================================================*/
++//#ifdef CONFIG_MTD_PARTITIONS
++static struct mtd_partition g_pasStatic_Partition[] = {
++ {
++ name: "ALL",
++ size: MTDPART_SIZ_FULL,
++ offset: 0,
++ },
++ /* Put your own partition definitions here */
++ {
++ name: "Bootloader",
++ size: MTD_BOOT_PART_SIZE,
++ offset: 0,
++ }, {
++ name: "Config",
++ size: MTD_CONFIG_PART_SIZE,
++ offset: MTDPART_OFS_APPEND
++ }, {
++ name: "Factory",
++ size: MTD_FACTORY_PART_SIZE,
++ offset: MTDPART_OFS_APPEND
++#ifdef CONFIG_RT2880_ROOTFS_IN_FLASH
++ }, {
++ name: "Kernel",
++ size: MTD_KERN_PART_SIZE,
++ offset: MTDPART_OFS_APPEND,
++ }, {
++ name: "RootFS",
++ size: MTD_ROOTFS_PART_SIZE,
++ offset: MTDPART_OFS_APPEND,
++#ifdef CONFIG_ROOTFS_IN_FLASH_NO_PADDING
++ }, {
++ name: "Kernel_RootFS",
++ size: MTD_KERN_PART_SIZE + MTD_ROOTFS_PART_SIZE,
++ offset: MTD_BOOT_PART_SIZE + MTD_CONFIG_PART_SIZE + MTD_FACTORY_PART_SIZE,
++#endif
++#else //CONFIG_RT2880_ROOTFS_IN_RAM
++ }, {
++ name: "Kernel",
++ size: 0x10000,
++ offset: MTDPART_OFS_APPEND,
++#endif
++#ifdef CONFIG_DUAL_IMAGE
++ }, {
++ name: "Kernel2",
++ size: MTD_KERN2_PART_SIZE,
++ offset: MTD_KERN2_PART_OFFSET,
++#ifdef CONFIG_RT2880_ROOTFS_IN_FLASH
++ }, {
++ name: "RootFS2",
++ size: MTD_ROOTFS2_PART_SIZE,
++ offset: MTD_ROOTFS2_PART_OFFSET,
++#endif
++#endif
++ }
++
++};
++
++#define NUM_PARTITIONS ARRAY_SIZE(g_pasStatic_Partition)
++extern int part_num; // = NUM_PARTITIONS;
++//#endif
++#undef RECONFIG_PARTITION_SIZE
++
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0046-DT-Add-documentation-for-gpio-ralink.patch b/target/linux/ramips/patches-3.14/0046-DT-Add-documentation-for-gpio-ralink.patch
new file mode 100644
index 0000000000..36b56b4910
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0046-DT-Add-documentation-for-gpio-ralink.patch
@@ -0,0 +1,65 @@
+From 6827bd971fc4f323fc91e4506771a13b827c49a3 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 28 Jul 2013 19:45:30 +0200
+Subject: [PATCH 46/57] DT: Add documentation for gpio-ralink
+
+Describe gpio-ralink binding.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Cc: linux-mips@linux-mips.org
+Cc: devicetree@vger.kernel.org
+Cc: linux-gpio@vger.kernel.org
+---
+ .../devicetree/bindings/gpio/gpio-ralink.txt | 40 ++++++++++++++++++++
+ 1 file changed, 40 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/gpio/gpio-ralink.txt
+
+diff --git a/Documentation/devicetree/bindings/gpio/gpio-ralink.txt b/Documentation/devicetree/bindings/gpio/gpio-ralink.txt
+new file mode 100644
+index 0000000..b4acf02
+--- /dev/null
++++ b/Documentation/devicetree/bindings/gpio/gpio-ralink.txt
+@@ -0,0 +1,40 @@
++Ralink SoC GPIO controller bindings
++
++Required properties:
++- compatible:
++ - "ralink,rt2880-gpio" for Ralink controllers
++- #gpio-cells : Should be two.
++ - first cell is the pin number
++ - second cell is used to specify optional parameters (unused)
++- gpio-controller : Marks the device node as a GPIO controller
++- reg : Physical base address and length of the controller's registers
++- interrupt-parent: phandle to the INTC device node
++- interrupts : Specify the INTC interrupt number
++- ralink,num-gpios : Specify the number of GPIOs
++- ralink,register-map : The register layout depends on the GPIO bank and actual
++ SoC type. Register offsets need to be in this order.
++ [ INT, EDGE, RENA, FENA, DATA, DIR, POL, SET, RESET, TOGGLE ]
++
++Optional properties:
++- ralink,gpio-base : Specify the GPIO chips base number
++
++Example:
++
++ gpio0: gpio@600 {
++ compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio";
++
++ #gpio-cells = <2>;
++ gpio-controller;
++
++ reg = <0x600 0x34>;
++
++ interrupt-parent = <&intc>;
++ interrupts = <6>;
++
++ ralink,gpio-base = <0>;
++ ralink,num-gpios = <24>;
++ ralink,register-map = [ 00 04 08 0c
++ 20 24 28 2c
++ 30 34 ];
++
++ };
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0047-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch b/target/linux/ramips/patches-3.14/0047-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch
new file mode 100644
index 0000000000..bbdd522934
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0047-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch
@@ -0,0 +1,433 @@
+From 4b23ed96930650076caa524ffdde898cb937bdaa Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 4 Aug 2014 20:36:29 +0200
+Subject: [PATCH 47/57] GPIO: MIPS: ralink: add gpio driver for ralink SoC
+
+Add gpio driver for Ralink SoC. This driver makes the gpio core on
+RT2880, RT305x, rt3352, rt3662, rt3883, rt5350 and mt7620 work.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Cc: linux-mips@linux-mips.org
+Cc: linux-gpio@vger.kernel.org
+---
+ arch/mips/include/asm/mach-ralink/gpio.h | 24 +++
+ drivers/gpio/Kconfig | 6 +
+ drivers/gpio/Makefile | 1 +
+ drivers/gpio/gpio-ralink.c | 345 ++++++++++++++++++++++++++++++
+ 4 files changed, 376 insertions(+)
+ create mode 100644 arch/mips/include/asm/mach-ralink/gpio.h
+ create mode 100644 drivers/gpio/gpio-ralink.c
+
+diff --git a/arch/mips/include/asm/mach-ralink/gpio.h b/arch/mips/include/asm/mach-ralink/gpio.h
+new file mode 100644
+index 0000000..f68ee16
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ralink/gpio.h
+@@ -0,0 +1,24 @@
++/*
++ * Ralink SoC GPIO API support
++ *
++ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ */
++
++#ifndef __ASM_MACH_RALINK_GPIO_H
++#define __ASM_MACH_RALINK_GPIO_H
++
++#define ARCH_NR_GPIOS 128
++#include <asm-generic/gpio.h>
++
++#define gpio_get_value __gpio_get_value
++#define gpio_set_value __gpio_set_value
++#define gpio_cansleep __gpio_cansleep
++#define gpio_to_irq __gpio_to_irq
++
++#endif /* __ASM_MACH_RALINK_GPIO_H */
+diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
+index 903f24d..2d75a68 100644
+--- a/drivers/gpio/Kconfig
++++ b/drivers/gpio/Kconfig
+@@ -260,6 +260,12 @@ config GPIO_SCH311X
+ To compile this driver as a module, choose M here: the module will
+ be called gpio-sch311x.
+
++config GPIO_RALINK
++ bool "Ralink GPIO Support"
++ depends on RALINK
++ help
++ Say yes here to support the Ralink SoC GPIO device
++
+ config GPIO_SPEAR_SPICS
+ bool "ST SPEAr13xx SPI Chip Select as GPIO support"
+ depends on PLAT_SPEAR
+diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
+index 5d50179..2cbdbe6 100644
+--- a/drivers/gpio/Makefile
++++ b/drivers/gpio/Makefile
+@@ -63,6 +63,7 @@ obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf857x.o
+ obj-$(CONFIG_GPIO_PCH) += gpio-pch.o
+ obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
+ obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
++obj-$(CONFIG_GPIO_RALINK) += gpio-ralink.o
+ obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o
+ obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
+ obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o
+diff --git a/drivers/gpio/gpio-ralink.c b/drivers/gpio/gpio-ralink.c
+new file mode 100644
+index 0000000..7e5a2e9
+--- /dev/null
++++ b/drivers/gpio/gpio-ralink.c
+@@ -0,0 +1,345 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/module.h>
++#include <linux/io.h>
++#include <linux/gpio.h>
++#include <linux/spinlock.h>
++#include <linux/platform_device.h>
++#include <linux/of_irq.h>
++#include <linux/irqdomain.h>
++#include <linux/interrupt.h>
++
++enum ralink_gpio_reg {
++ GPIO_REG_INT = 0,
++ GPIO_REG_EDGE,
++ GPIO_REG_RENA,
++ GPIO_REG_FENA,
++ GPIO_REG_DATA,
++ GPIO_REG_DIR,
++ GPIO_REG_POL,
++ GPIO_REG_SET,
++ GPIO_REG_RESET,
++ GPIO_REG_TOGGLE,
++ GPIO_REG_MAX
++};
++
++struct ralink_gpio_chip {
++ struct gpio_chip chip;
++ u8 regs[GPIO_REG_MAX];
++
++ spinlock_t lock;
++ void __iomem *membase;
++ struct irq_domain *domain;
++ int irq;
++
++ u32 rising;
++ u32 falling;
++};
++
++#define MAP_MAX 4
++static struct irq_domain *irq_map[MAP_MAX];
++static int irq_map_count;
++static atomic_t irq_refcount = ATOMIC_INIT(0);
++
++static inline struct ralink_gpio_chip *to_ralink_gpio(struct gpio_chip *chip)
++{
++ struct ralink_gpio_chip *rg;
++
++ rg = container_of(chip, struct ralink_gpio_chip, chip);
++
++ return rg;
++}
++
++static inline void rt_gpio_w32(struct ralink_gpio_chip *rg, u8 reg, u32 val)
++{
++ iowrite32(val, rg->membase + rg->regs[reg]);
++}
++
++static inline u32 rt_gpio_r32(struct ralink_gpio_chip *rg, u8 reg)
++{
++ return ioread32(rg->membase + rg->regs[reg]);
++}
++
++static void ralink_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
++{
++ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
++
++ rt_gpio_w32(rg, (value) ? GPIO_REG_SET : GPIO_REG_RESET, BIT(offset));
++}
++
++static int ralink_gpio_get(struct gpio_chip *chip, unsigned offset)
++{
++ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
++
++ return !!(rt_gpio_r32(rg, GPIO_REG_DATA) & BIT(offset));
++}
++
++static int ralink_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
++{
++ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
++ unsigned long flags;
++ u32 t;
++
++ spin_lock_irqsave(&rg->lock, flags);
++ t = rt_gpio_r32(rg, GPIO_REG_DIR);
++ t &= ~BIT(offset);
++ rt_gpio_w32(rg, GPIO_REG_DIR, t);
++ spin_unlock_irqrestore(&rg->lock, flags);
++
++ return 0;
++}
++
++static int ralink_gpio_direction_output(struct gpio_chip *chip,
++ unsigned offset, int value)
++{
++ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
++ unsigned long flags;
++ u32 t;
++
++ spin_lock_irqsave(&rg->lock, flags);
++ ralink_gpio_set(chip, offset, value);
++ t = rt_gpio_r32(rg, GPIO_REG_DIR);
++ t |= BIT(offset);
++ rt_gpio_w32(rg, GPIO_REG_DIR, t);
++ spin_unlock_irqrestore(&rg->lock, flags);
++
++ return 0;
++}
++
++static int ralink_gpio_to_irq(struct gpio_chip *chip, unsigned pin)
++{
++ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
++
++ if (rg->irq < 1)
++ return -1;
++
++ return irq_create_mapping(rg->domain, pin);
++}
++
++static void ralink_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
++{
++ int i;
++
++ for (i = 0; i < irq_map_count; i++) {
++ struct irq_domain *domain = irq_map[i];
++ struct ralink_gpio_chip *rg;
++ unsigned long pending;
++ int bit;
++
++ rg = (struct ralink_gpio_chip *) domain->host_data;
++ pending = rt_gpio_r32(rg, GPIO_REG_INT);
++
++ for_each_set_bit(bit, &pending, rg->chip.ngpio) {
++ u32 map = irq_find_mapping(domain, bit);
++ generic_handle_irq(map);
++ rt_gpio_w32(rg, GPIO_REG_INT, BIT(bit));
++ }
++ }
++}
++
++static void ralink_gpio_irq_unmask(struct irq_data *d)
++{
++ struct ralink_gpio_chip *rg;
++ unsigned long flags;
++ u32 val;
++
++ rg = (struct ralink_gpio_chip *) d->domain->host_data;
++ val = rt_gpio_r32(rg, GPIO_REG_RENA);
++
++ spin_lock_irqsave(&rg->lock, flags);
++ rt_gpio_w32(rg, GPIO_REG_RENA, val | (BIT(d->hwirq) & rg->rising));
++ rt_gpio_w32(rg, GPIO_REG_FENA, val | (BIT(d->hwirq) & rg->falling));
++ spin_unlock_irqrestore(&rg->lock, flags);
++}
++
++static void ralink_gpio_irq_mask(struct irq_data *d)
++{
++ struct ralink_gpio_chip *rg;
++ unsigned long flags;
++ u32 val;
++
++ rg = (struct ralink_gpio_chip *) d->domain->host_data;
++ val = rt_gpio_r32(rg, GPIO_REG_RENA);
++
++ spin_lock_irqsave(&rg->lock, flags);
++ rt_gpio_w32(rg, GPIO_REG_FENA, val & ~BIT(d->hwirq));
++ rt_gpio_w32(rg, GPIO_REG_RENA, val & ~BIT(d->hwirq));
++ spin_unlock_irqrestore(&rg->lock, flags);
++}
++
++static int ralink_gpio_irq_type(struct irq_data *d, unsigned int type)
++{
++ struct ralink_gpio_chip *rg;
++ u32 mask = BIT(d->hwirq);
++
++ rg = (struct ralink_gpio_chip *) d->domain->host_data;
++
++ if (type == IRQ_TYPE_PROBE) {
++ if ((rg->rising | rg->falling) & mask)
++ return 0;
++
++ type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
++ }
++
++ if (type & IRQ_TYPE_EDGE_RISING)
++ rg->rising |= mask;
++ else
++ rg->rising &= ~mask;
++
++ if (type & IRQ_TYPE_EDGE_FALLING)
++ rg->falling |= mask;
++ else
++ rg->falling &= ~mask;
++
++ return 0;
++}
++
++static struct irq_chip ralink_gpio_irq_chip = {
++ .name = "GPIO",
++ .irq_unmask = ralink_gpio_irq_unmask,
++ .irq_mask = ralink_gpio_irq_mask,
++ .irq_mask_ack = ralink_gpio_irq_mask,
++ .irq_set_type = ralink_gpio_irq_type,
++};
++
++static int gpio_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
++{
++ irq_set_chip_and_handler(irq, &ralink_gpio_irq_chip, handle_level_irq);
++ irq_set_handler_data(irq, d);
++
++ return 0;
++}
++
++static const struct irq_domain_ops irq_domain_ops = {
++ .xlate = irq_domain_xlate_onecell,
++ .map = gpio_map,
++};
++
++static void ralink_gpio_irq_init(struct device_node *np,
++ struct ralink_gpio_chip *rg)
++{
++ if (irq_map_count >= MAP_MAX)
++ return;
++
++ rg->irq = irq_of_parse_and_map(np, 0);
++ if (!rg->irq)
++ return;
++
++ rg->domain = irq_domain_add_linear(np, rg->chip.ngpio,
++ &irq_domain_ops, rg);
++ if (!rg->domain) {
++ dev_err(rg->chip.dev, "irq_domain_add_linear failed\n");
++ return;
++ }
++
++ irq_map[irq_map_count++] = rg->domain;
++
++ rt_gpio_w32(rg, GPIO_REG_RENA, 0x0);
++ rt_gpio_w32(rg, GPIO_REG_FENA, 0x0);
++
++ if (!atomic_read(&irq_refcount))
++ irq_set_chained_handler(rg->irq, ralink_gpio_irq_handler);
++ atomic_inc(&irq_refcount);
++
++ dev_info(rg->chip.dev, "registering %d irq handlers\n", rg->chip.ngpio);
++}
++
++static int ralink_gpio_request(struct gpio_chip *chip, unsigned offset)
++{
++ int gpio = chip->base + offset;
++
++ return pinctrl_request_gpio(gpio);
++}
++
++static int ralink_gpio_probe(struct platform_device *pdev)
++{
++ struct device_node *np = pdev->dev.of_node;
++ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ struct ralink_gpio_chip *rg;
++ const __be32 *ngpio, *gpiobase;
++
++ if (!res) {
++ dev_err(&pdev->dev, "failed to find resource\n");
++ return -ENOMEM;
++ }
++
++ rg = devm_kzalloc(&pdev->dev,
++ sizeof(struct ralink_gpio_chip), GFP_KERNEL);
++ if (!rg)
++ return -ENOMEM;
++
++ rg->membase = devm_request_and_ioremap(&pdev->dev, res);
++ if (!rg->membase) {
++ dev_err(&pdev->dev, "cannot remap I/O memory region\n");
++ return -ENOMEM;
++ }
++
++ if (of_property_read_u8_array(np, "ralink,register-map",
++ rg->regs, GPIO_REG_MAX)) {
++ dev_err(&pdev->dev, "failed to read register definition\n");
++ return -EINVAL;
++ }
++
++ ngpio = of_get_property(np, "ralink,num-gpios", NULL);
++ if (!ngpio) {
++ dev_err(&pdev->dev, "failed to read number of pins\n");
++ return -EINVAL;
++ }
++
++ gpiobase = of_get_property(np, "ralink,gpio-base", NULL);
++ if (gpiobase)
++ rg->chip.base = be32_to_cpu(*gpiobase);
++ else
++ rg->chip.base = -1;
++
++ spin_lock_init(&rg->lock);
++
++ rg->chip.dev = &pdev->dev;
++ rg->chip.label = dev_name(&pdev->dev);
++ rg->chip.of_node = np;
++ rg->chip.ngpio = be32_to_cpu(*ngpio);
++ rg->chip.direction_input = ralink_gpio_direction_input;
++ rg->chip.direction_output = ralink_gpio_direction_output;
++ rg->chip.get = ralink_gpio_get;
++ rg->chip.set = ralink_gpio_set;
++ rg->chip.request = ralink_gpio_request;
++ rg->chip.to_irq = ralink_gpio_to_irq;
++
++ /* set polarity to low for all lines */
++ rt_gpio_w32(rg, GPIO_REG_POL, 0);
++
++ dev_info(&pdev->dev, "registering %d gpios\n", rg->chip.ngpio);
++
++ ralink_gpio_irq_init(np, rg);
++
++ return gpiochip_add(&rg->chip);
++}
++
++static const struct of_device_id ralink_gpio_match[] = {
++ { .compatible = "ralink,rt2880-gpio" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, ralink_gpio_match);
++
++static struct platform_driver ralink_gpio_driver = {
++ .probe = ralink_gpio_probe,
++ .driver = {
++ .name = "rt2880_gpio",
++ .owner = THIS_MODULE,
++ .of_match_table = ralink_gpio_match,
++ },
++};
++
++static int __init ralink_gpio_init(void)
++{
++ return platform_driver_register(&ralink_gpio_driver);
++}
++
++subsys_initcall(ralink_gpio_init);
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0048-GPIO-ralink-add-mt7621-gpio-controller.patch b/target/linux/ramips/patches-3.14/0048-GPIO-ralink-add-mt7621-gpio-controller.patch
new file mode 100644
index 0000000000..9aa03a0949
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0048-GPIO-ralink-add-mt7621-gpio-controller.patch
@@ -0,0 +1,240 @@
+From 8481cdf6f96dc16cbcc129d046c021d17a891274 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 27 Jul 2014 11:00:32 +0100
+Subject: [PATCH 48/57] GPIO: ralink: add mt7621 gpio controller
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/Kconfig | 3 +
+ drivers/gpio/Kconfig | 6 ++
+ drivers/gpio/Makefile | 1 +
+ drivers/gpio/gpio-mt7621.c | 177 ++++++++++++++++++++++++++++++++++++++++++++
+ 4 files changed, 187 insertions(+)
+ create mode 100644 drivers/gpio/gpio-mt7621.c
+
+diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
+index 4ac98ca..fd3bbb1 100644
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -437,6 +437,9 @@ config RALINK
+ select RESET_CONTROLLER
+ select PINCTRL
+ select PINCTRL_RT2880
++ select ARCH_HAS_RESET_CONTROLLER
++ select RESET_CONTROLLER
++ select ARCH_REQUIRE_GPIOLIB
+
+ config SGI_IP22
+ bool "SGI IP22 (Indy/Indigo2)"
+diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
+index 2d75a68..5dff8d5 100644
+--- a/drivers/gpio/Kconfig
++++ b/drivers/gpio/Kconfig
+@@ -827,6 +827,12 @@ config GPIO_BCM_KONA
+ help
+ Turn on GPIO support for Broadcom "Kona" chips.
+
++config GPIO_MT7621
++ bool "Mediatek GPIO Support"
++ depends on SOC_MT7620 || SOC_MT7621
++ help
++ Say yes here to support the Mediatek SoC GPIO device
++
+ comment "USB GPIO expanders:"
+
+ config GPIO_VIPERBOARD
+diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
+index 2cbdbe6..2365e34 100644
+--- a/drivers/gpio/Makefile
++++ b/drivers/gpio/Makefile
+@@ -100,3 +100,4 @@ obj-$(CONFIG_GPIO_WM8350) += gpio-wm8350.o
+ obj-$(CONFIG_GPIO_WM8994) += gpio-wm8994.o
+ obj-$(CONFIG_GPIO_XILINX) += gpio-xilinx.o
+ obj-$(CONFIG_GPIO_XTENSA) += gpio-xtensa.o
++obj-$(CONFIG_GPIO_MT7621) += gpio-mt7621.o
+diff --git a/drivers/gpio/gpio-mt7621.c b/drivers/gpio/gpio-mt7621.c
+new file mode 100644
+index 0000000..7ae7eb9
+--- /dev/null
++++ b/drivers/gpio/gpio-mt7621.c
+@@ -0,0 +1,177 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/io.h>
++#include <linux/err.h>
++#include <linux/gpio.h>
++#include <linux/module.h>
++#include <linux/of_irq.h>
++#include <linux/spinlock.h>
++#include <linux/irqdomain.h>
++#include <linux/interrupt.h>
++#include <linux/platform_device.h>
++
++#define MTK_BANK_WIDTH 32
++
++enum mediatek_gpio_reg {
++ GPIO_REG_CTRL = 0,
++ GPIO_REG_POL,
++ GPIO_REG_DATA,
++ GPIO_REG_DSET,
++ GPIO_REG_DCLR,
++};
++
++static void __iomem *mtk_gc_membase;
++
++struct mtk_gc {
++ struct gpio_chip chip;
++ spinlock_t lock;
++ int bank;
++};
++
++static inline struct mtk_gc
++*to_mediatek_gpio(struct gpio_chip *chip)
++{
++ struct mtk_gc *mgc;
++
++ mgc = container_of(chip, struct mtk_gc, chip);
++
++ return mgc;
++}
++
++static inline void
++mtk_gpio_w32(struct mtk_gc *rg, u8 reg, u32 val)
++{
++ iowrite32(val, mtk_gc_membase + (reg * 0x10) + (rg->bank * 0x4));
++}
++
++static inline u32
++mtk_gpio_r32(struct mtk_gc *rg, u8 reg)
++{
++ return ioread32(mtk_gc_membase + (reg * 0x10) + (rg->bank * 0x4));
++}
++
++static void
++mediatek_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
++{
++ struct mtk_gc *rg = to_mediatek_gpio(chip);
++
++ mtk_gpio_w32(rg, (value) ? GPIO_REG_DSET : GPIO_REG_DCLR, BIT(offset));
++}
++
++static int
++mediatek_gpio_get(struct gpio_chip *chip, unsigned offset)
++{
++ struct mtk_gc *rg = to_mediatek_gpio(chip);
++
++ return !!(mtk_gpio_r32(rg, GPIO_REG_DATA) & BIT(offset));
++}
++
++static int
++mediatek_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
++{
++ struct mtk_gc *rg = to_mediatek_gpio(chip);
++ unsigned long flags;
++ u32 t;
++
++ spin_lock_irqsave(&rg->lock, flags);
++ t = mtk_gpio_r32(rg, GPIO_REG_CTRL);
++ t &= ~BIT(offset);
++ mtk_gpio_w32(rg, GPIO_REG_CTRL, t);
++ spin_unlock_irqrestore(&rg->lock, flags);
++
++ return 0;
++}
++
++static int
++mediatek_gpio_direction_output(struct gpio_chip *chip,
++ unsigned offset, int value)
++{
++ struct mtk_gc *rg = to_mediatek_gpio(chip);
++ unsigned long flags;
++ u32 t;
++
++ spin_lock_irqsave(&rg->lock, flags);
++ t = mtk_gpio_r32(rg, GPIO_REG_CTRL);
++ t |= BIT(offset);
++ mtk_gpio_w32(rg, GPIO_REG_CTRL, t);
++ mediatek_gpio_set(chip, offset, value);
++ spin_unlock_irqrestore(&rg->lock, flags);
++
++ return 0;
++}
++
++static int
++mediatek_gpio_bank_probe(struct platform_device *pdev, struct device_node *bank)
++{
++ const __be32 *id = of_get_property(bank, "reg", NULL);
++ struct mtk_gc *rg = devm_kzalloc(&pdev->dev,
++ sizeof(struct mtk_gc), GFP_KERNEL);
++ if (!rg || !id)
++ return -ENOMEM;
++
++ spin_lock_init(&rg->lock);
++
++ rg->chip.dev = &pdev->dev;
++ rg->chip.label = dev_name(&pdev->dev);
++ rg->chip.of_node = bank;
++ rg->chip.base = MTK_BANK_WIDTH * be32_to_cpu(*id);
++ rg->chip.ngpio = MTK_BANK_WIDTH;
++ rg->chip.direction_input = mediatek_gpio_direction_input;
++ rg->chip.direction_output = mediatek_gpio_direction_output;
++ rg->chip.get = mediatek_gpio_get;
++ rg->chip.set = mediatek_gpio_set;
++
++ /* set polarity to low for all gpios */
++ mtk_gpio_w32(rg, GPIO_REG_POL, 0);
++
++ dev_info(&pdev->dev, "registering %d gpios\n", rg->chip.ngpio);
++
++ return gpiochip_add(&rg->chip);
++}
++
++static int
++mediatek_gpio_probe(struct platform_device *pdev)
++{
++ struct device_node *bank, *np = pdev->dev.of_node;
++ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++
++ mtk_gc_membase = devm_request_and_ioremap(&pdev->dev, res);
++ if (IS_ERR(mtk_gc_membase))
++ return PTR_ERR(mtk_gc_membase);
++
++ for_each_child_of_node(np, bank)
++ if (of_device_is_compatible(bank, "mtk,mt7621-gpio-bank"))
++ mediatek_gpio_bank_probe(pdev, bank);
++
++ return 0;
++}
++
++static const struct of_device_id mediatek_gpio_match[] = {
++ { .compatible = "mtk,mt7621-gpio" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, mediatek_gpio_match);
++
++static struct platform_driver mediatek_gpio_driver = {
++ .probe = mediatek_gpio_probe,
++ .driver = {
++ .name = "mt7621_gpio",
++ .owner = THIS_MODULE,
++ .of_match_table = mediatek_gpio_match,
++ },
++};
++
++static int __init
++mediatek_gpio_init(void)
++{
++ return platform_driver_register(&mediatek_gpio_driver);
++}
++
++subsys_initcall(mediatek_gpio_init);
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0049-DT-Add-documentation-for-spi-rt2880.patch b/target/linux/ramips/patches-3.14/0049-DT-Add-documentation-for-spi-rt2880.patch
new file mode 100644
index 0000000000..902334e0fa
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0049-DT-Add-documentation-for-spi-rt2880.patch
@@ -0,0 +1,50 @@
+From 6ed8d03e5f4283b60dffea5c10ff1484141824e7 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 9 Aug 2013 20:12:59 +0200
+Subject: [PATCH 49/57] DT: Add documentation for spi-rt2880
+
+Describe the SPI master found on the MIPS based Ralink RT2880 SoC.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ .../devicetree/bindings/spi/spi-rt2880.txt | 28 ++++++++++++++++++++
+ 1 file changed, 28 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/spi/spi-rt2880.txt
+
+diff --git a/Documentation/devicetree/bindings/spi/spi-rt2880.txt b/Documentation/devicetree/bindings/spi/spi-rt2880.txt
+new file mode 100644
+index 0000000..068bc90
+--- /dev/null
++++ b/Documentation/devicetree/bindings/spi/spi-rt2880.txt
+@@ -0,0 +1,28 @@
++Ralink SoC RT2880 SPI master controller.
++
++This SPI controller is found on most wireless SoCs made by ralink.
++
++Required properties:
++- compatible : "ralink,rt2880-spi"
++- reg : The register base for the controller.
++- #address-cells : <1>, as required by generic SPI binding.
++- #size-cells : <0>, also as required by generic SPI binding.
++
++Child nodes as per the generic SPI binding.
++
++Example:
++
++ spi@b00 {
++ compatible = "ralink,rt2880-spi";
++ reg = <0xb00 0x100>;
++
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ m25p80@0 {
++ compatible = "m25p80";
++ reg = <0>;
++ spi-max-frequency = <10000000>;
++ };
++ };
++
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0050-SPI-ralink-add-Ralink-SoC-spi-driver.patch b/target/linux/ramips/patches-3.14/0050-SPI-ralink-add-Ralink-SoC-spi-driver.patch
new file mode 100644
index 0000000000..f446689948
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0050-SPI-ralink-add-Ralink-SoC-spi-driver.patch
@@ -0,0 +1,486 @@
+From fc006d0622ab8c43086b2c9018c03012db332033 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 27 Jul 2014 11:15:12 +0100
+Subject: [PATCH 50/57] SPI: ralink: add Ralink SoC spi driver
+
+Add the driver needed to make SPI work on Ralink SoC.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Acked-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/spi/Kconfig | 6 +
+ drivers/spi/Makefile | 1 +
+ drivers/spi/spi-rt2880.c | 432 ++++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 439 insertions(+)
+ create mode 100644 drivers/spi/spi-rt2880.c
+
+diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
+index 581ee2a..009f8f3 100644
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -381,6 +381,12 @@ config SPI_RSPI
+ help
+ SPI driver for Renesas RSPI and QSPI blocks.
+
++config SPI_RT2880
++ tristate "Ralink RT288x SPI Controller"
++ depends on RALINK
++ help
++ This selects a driver for the Ralink RT288x/RT305x SPI Controller.
++
+ config SPI_S3C24XX
+ tristate "Samsung S3C24XX series SPI"
+ depends on ARCH_S3C24XX
+diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
+index 95af48d..1f647e5 100644
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -60,6 +60,7 @@ spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_DMA) += spi-pxa2xx-dma.o
+ obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx-platform.o
+ obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o
+ obj-$(CONFIG_SPI_RSPI) += spi-rspi.o
++obj-$(CONFIG_SPI_RT2880) += spi-rt2880.o
+ obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
+ spi-s3c24xx-hw-y := spi-s3c24xx.o
+ spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o
+diff --git a/drivers/spi/spi-rt2880.c b/drivers/spi/spi-rt2880.c
+new file mode 100644
+index 0000000..ac9de67
+--- /dev/null
++++ b/drivers/spi/spi-rt2880.c
+@@ -0,0 +1,432 @@
++/*
++ * spi-rt2880.c -- Ralink RT288x/RT305x SPI controller driver
++ *
++ * Copyright (C) 2011 Sergiy <piratfm@gmail.com>
++ * Copyright (C) 2011-2013 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * Some parts are based on spi-orion.c:
++ * Author: Shadi Ammouri <shadi@marvell.com>
++ * Copyright (C) 2007-2008 Marvell Ltd.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/delay.h>
++#include <linux/io.h>
++#include <linux/reset.h>
++#include <linux/spi/spi.h>
++#include <linux/platform_device.h>
++
++#define DRIVER_NAME "spi-rt2880"
++/* only one slave is supported*/
++#define RALINK_NUM_CHIPSELECTS 1
++/* in usec */
++#define RALINK_SPI_WAIT_MAX_LOOP 2000
++
++#define RAMIPS_SPI_STAT 0x00
++#define RAMIPS_SPI_CFG 0x10
++#define RAMIPS_SPI_CTL 0x14
++#define RAMIPS_SPI_DATA 0x20
++#define RAMIPS_SPI_FIFO_STAT 0x38
++
++/* SPISTAT register bit field */
++#define SPISTAT_BUSY BIT(0)
++
++/* SPICFG register bit field */
++#define SPICFG_LSBFIRST 0
++#define SPICFG_MSBFIRST BIT(8)
++#define SPICFG_SPICLKPOL BIT(6)
++#define SPICFG_RXCLKEDGE_FALLING BIT(5)
++#define SPICFG_TXCLKEDGE_FALLING BIT(4)
++#define SPICFG_SPICLK_PRESCALE_MASK 0x7
++#define SPICFG_SPICLK_DIV2 0
++#define SPICFG_SPICLK_DIV4 1
++#define SPICFG_SPICLK_DIV8 2
++#define SPICFG_SPICLK_DIV16 3
++#define SPICFG_SPICLK_DIV32 4
++#define SPICFG_SPICLK_DIV64 5
++#define SPICFG_SPICLK_DIV128 6
++#define SPICFG_SPICLK_DISABLE 7
++
++/* SPICTL register bit field */
++#define SPICTL_HIZSDO BIT(3)
++#define SPICTL_STARTWR BIT(2)
++#define SPICTL_STARTRD BIT(1)
++#define SPICTL_SPIENA BIT(0)
++
++/* SPIFIFOSTAT register bit field */
++#define SPIFIFOSTAT_TXFULL BIT(17)
++
++struct rt2880_spi {
++ struct spi_master *master;
++ void __iomem *base;
++ unsigned int sys_freq;
++ unsigned int speed;
++ struct clk *clk;
++ spinlock_t lock;
++};
++
++static inline struct rt2880_spi *spidev_to_rt2880_spi(struct spi_device *spi)
++{
++ return spi_master_get_devdata(spi->master);
++}
++
++static inline u32 rt2880_spi_read(struct rt2880_spi *rs, u32 reg)
++{
++ return ioread32(rs->base + reg);
++}
++
++static inline void rt2880_spi_write(struct rt2880_spi *rs, u32 reg, u32 val)
++{
++ iowrite32(val, rs->base + reg);
++}
++
++static inline void rt2880_spi_setbits(struct rt2880_spi *rs, u32 reg, u32 mask)
++{
++ void __iomem *addr = rs->base + reg;
++ unsigned long flags;
++ u32 val;
++
++ spin_lock_irqsave(&rs->lock, flags);
++ val = ioread32(addr);
++ val |= mask;
++ iowrite32(val, addr);
++ spin_unlock_irqrestore(&rs->lock, flags);
++}
++
++static inline void rt2880_spi_clrbits(struct rt2880_spi *rs, u32 reg, u32 mask)
++{
++ void __iomem *addr = rs->base + reg;
++ unsigned long flags;
++ u32 val;
++
++ spin_lock_irqsave(&rs->lock, flags);
++ val = ioread32(addr);
++ val &= ~mask;
++ iowrite32(val, addr);
++ spin_unlock_irqrestore(&rs->lock, flags);
++}
++
++static int rt2880_spi_baudrate_set(struct spi_device *spi, unsigned int speed)
++{
++ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
++ u32 rate;
++ u32 prescale;
++ u32 reg;
++
++ dev_dbg(&spi->dev, "speed:%u\n", speed);
++
++ /*
++ * the supported rates are: 2, 4, 8, ... 128
++ * round up as we look for equal or less speed
++ */
++ rate = DIV_ROUND_UP(rs->sys_freq, speed);
++ dev_dbg(&spi->dev, "rate-1:%u\n", rate);
++ rate = roundup_pow_of_two(rate);
++ dev_dbg(&spi->dev, "rate-2:%u\n", rate);
++
++ /* check if requested speed is too small */
++ if (rate > 128)
++ return -EINVAL;
++
++ if (rate < 2)
++ rate = 2;
++
++ /* Convert the rate to SPI clock divisor value. */
++ prescale = ilog2(rate / 2);
++ dev_dbg(&spi->dev, "prescale:%u\n", prescale);
++
++ reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG);
++ reg = ((reg & ~SPICFG_SPICLK_PRESCALE_MASK) | prescale);
++ rt2880_spi_write(rs, RAMIPS_SPI_CFG, reg);
++ rs->speed = speed;
++ return 0;
++}
++
++/*
++ * called only when no transfer is active on the bus
++ */
++static int
++rt2880_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
++{
++ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
++ unsigned int speed = spi->max_speed_hz;
++ int rc;
++
++ if ((t != NULL) && t->speed_hz)
++ speed = t->speed_hz;
++
++ if (rs->speed != speed) {
++ dev_dbg(&spi->dev, "speed_hz:%u\n", speed);
++ rc = rt2880_spi_baudrate_set(spi, speed);
++ if (rc)
++ return rc;
++ }
++
++ return 0;
++}
++
++static void rt2880_spi_set_cs(struct rt2880_spi *rs, int enable)
++{
++ if (enable)
++ rt2880_spi_clrbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
++ else
++ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
++}
++
++static inline int rt2880_spi_wait_till_ready(struct rt2880_spi *rs)
++{
++ int i;
++
++ for (i = 0; i < RALINK_SPI_WAIT_MAX_LOOP; i++) {
++ u32 status;
++
++ status = rt2880_spi_read(rs, RAMIPS_SPI_STAT);
++ if ((status & SPISTAT_BUSY) == 0)
++ return 0;
++
++ cpu_relax();
++ udelay(1);
++ }
++
++ return -ETIMEDOUT;
++}
++
++static unsigned int
++rt2880_spi_write_read(struct spi_device *spi, struct spi_transfer *xfer)
++{
++ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
++ unsigned count = 0;
++ u8 *rx = xfer->rx_buf;
++ const u8 *tx = xfer->tx_buf;
++ int err;
++
++ dev_dbg(&spi->dev, "read (%d): %s %s\n", xfer->len,
++ (tx != NULL) ? "tx" : " ",
++ (rx != NULL) ? "rx" : " ");
++
++ if (tx) {
++ for (count = 0; count < xfer->len; count++) {
++ rt2880_spi_write(rs, RAMIPS_SPI_DATA, tx[count]);
++ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTWR);
++ err = rt2880_spi_wait_till_ready(rs);
++ if (err) {
++ dev_err(&spi->dev, "TX failed, err=%d\n", err);
++ goto out;
++ }
++ }
++ }
++
++ if (rx) {
++ for (count = 0; count < xfer->len; count++) {
++ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTRD);
++ err = rt2880_spi_wait_till_ready(rs);
++ if (err) {
++ dev_err(&spi->dev, "RX failed, err=%d\n", err);
++ goto out;
++ }
++ rx[count] = (u8) rt2880_spi_read(rs, RAMIPS_SPI_DATA);
++ }
++ }
++
++out:
++ return count;
++}
++
++static int rt2880_spi_transfer_one_message(struct spi_master *master,
++ struct spi_message *m)
++{
++ struct rt2880_spi *rs = spi_master_get_devdata(master);
++ struct spi_device *spi = m->spi;
++ struct spi_transfer *t = NULL;
++ int par_override = 0;
++ int status = 0;
++ int cs_active = 0;
++
++ /* Load defaults */
++ status = rt2880_spi_setup_transfer(spi, NULL);
++ if (status < 0)
++ goto msg_done;
++
++ list_for_each_entry(t, &m->transfers, transfer_list) {
++ if (t->tx_buf == NULL && t->rx_buf == NULL && t->len) {
++ dev_err(&spi->dev,
++ "message rejected: invalid transfer data buffers\n");
++ status = -EIO;
++ goto msg_done;
++ }
++
++ if (t->speed_hz && t->speed_hz < (rs->sys_freq / 128)) {
++ dev_err(&spi->dev,
++ "message rejected: device min speed (%d Hz) exceeds required transfer speed (%d Hz)\n",
++ (rs->sys_freq / 128), t->speed_hz);
++ status = -EIO;
++ goto msg_done;
++ }
++
++ if (par_override || t->speed_hz || t->bits_per_word) {
++ par_override = 1;
++ status = rt2880_spi_setup_transfer(spi, t);
++ if (status < 0)
++ goto msg_done;
++ if (!t->speed_hz && !t->bits_per_word)
++ par_override = 0;
++ }
++
++ if (!cs_active) {
++ rt2880_spi_set_cs(rs, 1);
++ cs_active = 1;
++ }
++
++ if (t->len)
++ m->actual_length += rt2880_spi_write_read(spi, t);
++
++ if (t->delay_usecs)
++ udelay(t->delay_usecs);
++
++ if (t->cs_change) {
++ rt2880_spi_set_cs(rs, 0);
++ cs_active = 0;
++ }
++ }
++
++msg_done:
++ if (cs_active)
++ rt2880_spi_set_cs(rs, 0);
++
++ m->status = status;
++ spi_finalize_current_message(master);
++
++ return 0;
++}
++
++static int rt2880_spi_setup(struct spi_device *spi)
++{
++ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
++
++ if ((spi->max_speed_hz == 0) ||
++ (spi->max_speed_hz > (rs->sys_freq / 2)))
++ spi->max_speed_hz = (rs->sys_freq / 2);
++
++ if (spi->max_speed_hz < (rs->sys_freq / 128)) {
++ dev_err(&spi->dev, "setup: requested speed is too low %d Hz\n",
++ spi->max_speed_hz);
++ return -EINVAL;
++ }
++
++ /*
++ * baudrate & width will be set rt2880_spi_setup_transfer
++ */
++ return 0;
++}
++
++static void rt2880_spi_reset(struct rt2880_spi *rs)
++{
++ rt2880_spi_write(rs, RAMIPS_SPI_CFG,
++ SPICFG_MSBFIRST | SPICFG_TXCLKEDGE_FALLING |
++ SPICFG_SPICLK_DIV16 | SPICFG_SPICLKPOL);
++ rt2880_spi_write(rs, RAMIPS_SPI_CTL, SPICTL_HIZSDO | SPICTL_SPIENA);
++}
++
++static int rt2880_spi_probe(struct platform_device *pdev)
++{
++ struct spi_master *master;
++ struct rt2880_spi *rs;
++ unsigned long flags;
++ void __iomem *base;
++ struct resource *r;
++ int status = 0;
++ struct clk *clk;
++
++ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ base = devm_ioremap_resource(&pdev->dev, r);
++ if (IS_ERR(base))
++ return PTR_ERR(base);
++
++ clk = devm_clk_get(&pdev->dev, NULL);
++ if (IS_ERR(clk)) {
++ dev_err(&pdev->dev, "unable to get SYS clock, err=%d\n",
++ status);
++ return PTR_ERR(clk);
++ }
++
++ status = clk_prepare_enable(clk);
++ if (status)
++ return status;
++
++ master = spi_alloc_master(&pdev->dev, sizeof(*rs));
++ if (master == NULL) {
++ dev_dbg(&pdev->dev, "master allocation failed\n");
++ return -ENOMEM;
++ }
++
++ /* we support only mode 0, and no options */
++ master->mode_bits = 0;
++
++ master->setup = rt2880_spi_setup;
++ master->transfer_one_message = rt2880_spi_transfer_one_message;
++ master->num_chipselect = RALINK_NUM_CHIPSELECTS;
++ master->bits_per_word_mask = SPI_BPW_MASK(8);
++ master->dev.of_node = pdev->dev.of_node;
++
++ dev_set_drvdata(&pdev->dev, master);
++
++ rs = spi_master_get_devdata(master);
++ rs->base = base;
++ rs->clk = clk;
++ rs->master = master;
++ rs->sys_freq = clk_get_rate(rs->clk);
++ dev_dbg(&pdev->dev, "sys_freq: %u\n", rs->sys_freq);
++ spin_lock_irqsave(&rs->lock, flags);
++
++ device_reset(&pdev->dev);
++
++ rt2880_spi_reset(rs);
++
++ return spi_register_master(master);
++}
++
++static int rt2880_spi_remove(struct platform_device *pdev)
++{
++ struct spi_master *master;
++ struct rt2880_spi *rs;
++
++ master = dev_get_drvdata(&pdev->dev);
++ rs = spi_master_get_devdata(master);
++
++ clk_disable(rs->clk);
++ spi_unregister_master(master);
++
++ return 0;
++}
++
++MODULE_ALIAS("platform:" DRIVER_NAME);
++
++static const struct of_device_id rt2880_spi_match[] = {
++ { .compatible = "ralink,rt2880-spi" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, rt2880_spi_match);
++
++static struct platform_driver rt2880_spi_driver = {
++ .driver = {
++ .name = DRIVER_NAME,
++ .owner = THIS_MODULE,
++ .of_match_table = rt2880_spi_match,
++ },
++ .probe = rt2880_spi_probe,
++ .remove = rt2880_spi_remove,
++};
++
++module_platform_driver(rt2880_spi_driver);
++
++MODULE_DESCRIPTION("Ralink SPI driver");
++MODULE_AUTHOR("Sergiy <piratfm@gmail.com>");
++MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
++MODULE_LICENSE("GPL");
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0051-SPI-MIPS-ralink-add-mt7621-support.patch b/target/linux/ramips/patches-3.14/0051-SPI-MIPS-ralink-add-mt7621-support.patch
new file mode 100644
index 0000000000..2c5a9c5e76
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0051-SPI-MIPS-ralink-add-mt7621-support.patch
@@ -0,0 +1,351 @@
+From 27b11d4f1888e1a3d6d75b46d4d5a4d86fc03891 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 6 Aug 2014 10:53:40 +0200
+Subject: [PATCH 51/57] SPI: MIPS: ralink: add mt7621 support
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/spi/spi-rt2880.c | 218 +++++++++++++++++++++++++++++++++++++++++++---
+ 1 file changed, 205 insertions(+), 13 deletions(-)
+
+diff --git a/drivers/spi/spi-rt2880.c b/drivers/spi/spi-rt2880.c
+index ac9de67..1c6b72d 100644
+--- a/drivers/spi/spi-rt2880.c
++++ b/drivers/spi/spi-rt2880.c
+@@ -21,8 +21,13 @@
+ #include <linux/io.h>
+ #include <linux/reset.h>
+ #include <linux/spi/spi.h>
++#include <linux/of_device.h>
+ #include <linux/platform_device.h>
+
++#include <ralink_regs.h>
++
++#define SPI_BPW_MASK(bits) BIT((bits) - 1)
++
+ #define DRIVER_NAME "spi-rt2880"
+ /* only one slave is supported*/
+ #define RALINK_NUM_CHIPSELECTS 1
+@@ -63,6 +68,25 @@
+ /* SPIFIFOSTAT register bit field */
+ #define SPIFIFOSTAT_TXFULL BIT(17)
+
++#define MT7621_SPI_TRANS 0x00
++#define SPITRANS_BUSY BIT(16)
++#define MT7621_SPI_OPCODE 0x04
++#define MT7621_SPI_DATA0 0x08
++#define SPI_CTL_TX_RX_CNT_MASK 0xff
++#define SPI_CTL_START BIT(8)
++#define MT7621_SPI_POLAR 0x38
++#define MT7621_SPI_MASTER 0x28
++#define MT7621_SPI_SPACE 0x3c
++
++struct rt2880_spi;
++
++struct rt2880_spi_ops {
++ void (*init_hw)(struct rt2880_spi *rs);
++ void (*set_cs)(struct rt2880_spi *rs, int enable);
++ int (*baudrate_set)(struct spi_device *spi, unsigned int speed);
++ unsigned int (*write_read)(struct spi_device *spi, struct list_head *list, struct spi_transfer *xfer);
++};
++
+ struct rt2880_spi {
+ struct spi_master *master;
+ void __iomem *base;
+@@ -70,6 +94,8 @@ struct rt2880_spi {
+ unsigned int speed;
+ struct clk *clk;
+ spinlock_t lock;
++
++ struct rt2880_spi_ops *ops;
+ };
+
+ static inline struct rt2880_spi *spidev_to_rt2880_spi(struct spi_device *spi)
+@@ -149,6 +175,17 @@ static int rt2880_spi_baudrate_set(struct spi_device *spi, unsigned int speed)
+ return 0;
+ }
+
++static int mt7621_spi_baudrate_set(struct spi_device *spi, unsigned int speed)
++{
++/* u32 master = rt2880_spi_read(rs, MT7621_SPI_MASTER);
++
++ // set default clock to hclk/5
++ master &= ~(0xfff << 16);
++ master |= 0x3 << 16;
++*/
++ return 0;
++}
++
+ /*
+ * called only when no transfer is active on the bus
+ */
+@@ -164,7 +201,7 @@ rt2880_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
+
+ if (rs->speed != speed) {
+ dev_dbg(&spi->dev, "speed_hz:%u\n", speed);
+- rc = rt2880_spi_baudrate_set(spi, speed);
++ rc = rs->ops->baudrate_set(spi, speed);
+ if (rc)
+ return rc;
+ }
+@@ -180,6 +217,17 @@ static void rt2880_spi_set_cs(struct rt2880_spi *rs, int enable)
+ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
+ }
+
++static void mt7621_spi_set_cs(struct rt2880_spi *rs, int enable)
++{
++ u32 polar = rt2880_spi_read(rs, MT7621_SPI_POLAR);
++
++ if (enable)
++ polar |= 1;
++ else
++ polar &= ~1;
++ rt2880_spi_write(rs, MT7621_SPI_POLAR, polar);
++}
++
+ static inline int rt2880_spi_wait_till_ready(struct rt2880_spi *rs)
+ {
+ int i;
+@@ -198,8 +246,26 @@ static inline int rt2880_spi_wait_till_ready(struct rt2880_spi *rs)
+ return -ETIMEDOUT;
+ }
+
++static inline int mt7621_spi_wait_till_ready(struct rt2880_spi *rs)
++{
++ int i;
++
++ for (i = 0; i < RALINK_SPI_WAIT_MAX_LOOP; i++) {
++ u32 status;
++
++ status = rt2880_spi_read(rs, MT7621_SPI_TRANS);
++ if ((status & SPITRANS_BUSY) == 0) {
++ return 0;
++ }
++ cpu_relax();
++ udelay(1);
++ }
++
++ return -ETIMEDOUT;
++}
++
+ static unsigned int
+-rt2880_spi_write_read(struct spi_device *spi, struct spi_transfer *xfer)
++rt2880_spi_write_read(struct spi_device *spi, struct list_head *list, struct spi_transfer *xfer)
+ {
+ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
+ unsigned count = 0;
+@@ -239,6 +305,100 @@ out:
+ return count;
+ }
+
++static unsigned int
++mt7621_spi_write_read(struct spi_device *spi, struct list_head *list, struct spi_transfer *xfer)
++{
++ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
++ struct spi_transfer *next = NULL;
++ const u8 *tx = xfer->tx_buf;
++ u8 *rx = NULL;
++ u32 trans;
++ int len = xfer->len;
++
++ if (!tx)
++ return 0;
++
++ if (!list_is_last(&xfer->transfer_list, list)) {
++ next = list_entry(xfer->transfer_list.next, struct spi_transfer, transfer_list);
++ rx = next->rx_buf;
++ }
++
++ trans = rt2880_spi_read(rs, MT7621_SPI_TRANS);
++ trans &= ~SPI_CTL_TX_RX_CNT_MASK;
++
++ if (tx) {
++ u32 data0 = 0, opcode = 0;
++
++ switch (xfer->len) {
++ case 8:
++ data0 |= tx[7] << 24;
++ case 7:
++ data0 |= tx[6] << 16;
++ case 6:
++ data0 |= tx[5] << 8;
++ case 5:
++ data0 |= tx[4];
++ case 4:
++ opcode |= tx[3] << 8;
++ case 3:
++ opcode |= tx[2] << 16;
++ case 2:
++ opcode |= tx[1] << 24;
++ case 1:
++ opcode |= tx[0];
++ break;
++
++ default:
++ dev_err(&spi->dev, "trying to write too many bytes: %d\n", next->len);
++ return -EINVAL;
++ }
++
++ rt2880_spi_write(rs, MT7621_SPI_DATA0, data0);
++ rt2880_spi_write(rs, MT7621_SPI_OPCODE, opcode);
++ trans |= xfer->len;
++ }
++
++ if (rx)
++ trans |= (next->len << 4);
++ rt2880_spi_write(rs, MT7621_SPI_TRANS, trans);
++ trans |= SPI_CTL_START;
++ rt2880_spi_write(rs, MT7621_SPI_TRANS, trans);
++
++ mt7621_spi_wait_till_ready(rs);
++
++ if (rx) {
++ u32 data0 = rt2880_spi_read(rs, MT7621_SPI_DATA0);
++ u32 opcode = rt2880_spi_read(rs, MT7621_SPI_OPCODE);
++
++ switch (next->len) {
++ case 8:
++ rx[7] = (opcode >> 24) & 0xff;
++ case 7:
++ rx[6] = (opcode >> 16) & 0xff;
++ case 6:
++ rx[5] = (opcode >> 8) & 0xff;
++ case 5:
++ rx[4] = opcode & 0xff;
++ case 4:
++ rx[3] = (data0 >> 24) & 0xff;
++ case 3:
++ rx[2] = (data0 >> 16) & 0xff;
++ case 2:
++ rx[1] = (data0 >> 8) & 0xff;
++ case 1:
++ rx[0] = data0 & 0xff;
++ break;
++
++ default:
++ dev_err(&spi->dev, "trying to read too many bytes: %d\n", next->len);
++ return -EINVAL;
++ }
++ len += next->len;
++ }
++
++ return len;
++}
++
+ static int rt2880_spi_transfer_one_message(struct spi_master *master,
+ struct spi_message *m)
+ {
+@@ -280,25 +440,25 @@ static int rt2880_spi_transfer_one_message(struct spi_master *master,
+ }
+
+ if (!cs_active) {
+- rt2880_spi_set_cs(rs, 1);
++ rs->ops->set_cs(rs, 1);
+ cs_active = 1;
+ }
+
+ if (t->len)
+- m->actual_length += rt2880_spi_write_read(spi, t);
++ m->actual_length += rs->ops->write_read(spi, &m->transfers, t);
+
+ if (t->delay_usecs)
+ udelay(t->delay_usecs);
+
+ if (t->cs_change) {
+- rt2880_spi_set_cs(rs, 0);
++ rs->ops->set_cs(rs, 0);
+ cs_active = 0;
+ }
+ }
+
+ msg_done:
+ if (cs_active)
+- rt2880_spi_set_cs(rs, 0);
++ rs->ops->set_cs(rs, 0);
+
+ m->status = status;
+ spi_finalize_current_message(master);
+@@ -334,8 +494,41 @@ static void rt2880_spi_reset(struct rt2880_spi *rs)
+ rt2880_spi_write(rs, RAMIPS_SPI_CTL, SPICTL_HIZSDO | SPICTL_SPIENA);
+ }
+
++static void mt7621_spi_reset(struct rt2880_spi *rs)
++{
++ u32 master = rt2880_spi_read(rs, MT7621_SPI_MASTER);
++
++ master &= ~(0xfff << 16);
++ master |= 3 << 16;
++
++ master |= 7 << 29;
++ rt2880_spi_write(rs, MT7621_SPI_MASTER, master);
++}
++
++static struct rt2880_spi_ops spi_ops[] = {
++ {
++ .init_hw = rt2880_spi_reset,
++ .set_cs = rt2880_spi_set_cs,
++ .baudrate_set = rt2880_spi_baudrate_set,
++ .write_read = rt2880_spi_write_read,
++ }, {
++ .init_hw = mt7621_spi_reset,
++ .set_cs = mt7621_spi_set_cs,
++ .baudrate_set = mt7621_spi_baudrate_set,
++ .write_read = mt7621_spi_write_read,
++ },
++};
++
++static const struct of_device_id rt2880_spi_match[] = {
++ { .compatible = "ralink,rt2880-spi", .data = &spi_ops[0]},
++ { .compatible = "ralink,mt7621-spi", .data = &spi_ops[1] },
++ {},
++};
++MODULE_DEVICE_TABLE(of, rt2880_spi_match);
++
+ static int rt2880_spi_probe(struct platform_device *pdev)
+ {
++ const struct of_device_id *match;
+ struct spi_master *master;
+ struct rt2880_spi *rs;
+ unsigned long flags;
+@@ -344,6 +537,10 @@ static int rt2880_spi_probe(struct platform_device *pdev)
+ int status = 0;
+ struct clk *clk;
+
++ match = of_match_device(rt2880_spi_match, &pdev->dev);
++ if (!match)
++ return -EINVAL;
++
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(&pdev->dev, r);
+ if (IS_ERR(base))
+@@ -382,12 +579,13 @@ static int rt2880_spi_probe(struct platform_device *pdev)
+ rs->clk = clk;
+ rs->master = master;
+ rs->sys_freq = clk_get_rate(rs->clk);
++ rs->ops = (struct rt2880_spi_ops *) match->data;
+ dev_dbg(&pdev->dev, "sys_freq: %u\n", rs->sys_freq);
+ spin_lock_irqsave(&rs->lock, flags);
+
+ device_reset(&pdev->dev);
+
+- rt2880_spi_reset(rs);
++ rs->ops->init_hw(rs);
+
+ return spi_register_master(master);
+ }
+@@ -408,12 +606,6 @@ static int rt2880_spi_remove(struct platform_device *pdev)
+
+ MODULE_ALIAS("platform:" DRIVER_NAME);
+
+-static const struct of_device_id rt2880_spi_match[] = {
+- { .compatible = "ralink,rt2880-spi" },
+- {},
+-};
+-MODULE_DEVICE_TABLE(of, rt2880_spi_match);
+-
+ static struct platform_driver rt2880_spi_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0052-i2c-MIPS-adds-ralink-I2C-driver.patch b/target/linux/ramips/patches-3.14/0052-i2c-MIPS-adds-ralink-I2C-driver.patch
new file mode 100644
index 0000000000..b03a5f0935
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0052-i2c-MIPS-adds-ralink-I2C-driver.patch
@@ -0,0 +1,358 @@
+From 225f36695bb07dad9510f9affd79e63f1a44a195 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 27 Jul 2014 09:52:56 +0100
+Subject: [PATCH 52/57] i2c: MIPS: adds ralink I2C driver
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ .../devicetree/bindings/i2c/i2c-ralink.txt | 27 ++
+ drivers/i2c/busses/Kconfig | 4 +
+ drivers/i2c/busses/Makefile | 1 +
+ drivers/i2c/busses/i2c-ralink.c | 274 ++++++++++++++++++++
+ 4 files changed, 306 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/i2c/i2c-ralink.txt
+ create mode 100644 drivers/i2c/busses/i2c-ralink.c
+
+diff --git a/Documentation/devicetree/bindings/i2c/i2c-ralink.txt b/Documentation/devicetree/bindings/i2c/i2c-ralink.txt
+new file mode 100644
+index 0000000..8fa8ac3
+--- /dev/null
++++ b/Documentation/devicetree/bindings/i2c/i2c-ralink.txt
+@@ -0,0 +1,27 @@
++I2C for Ralink platforms
++
++Required properties :
++- compatible : Must be "link,rt3052-i2c"
++- reg: physical base address of the controller and length of memory mapped
++ region.
++- #address-cells = <1>;
++- #size-cells = <0>;
++
++Optional properties:
++- Child nodes conforming to i2c bus binding
++
++Example :
++
++palmbus@10000000 {
++ i2c@900 {
++ compatible = "link,rt3052-i2c";
++ reg = <0x900 0x100>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ hwmon@4b {
++ compatible = "national,lm92";
++ reg = <0x4b>;
++ };
++ };
++};
+diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
+index de17c55..d773b72 100644
+--- a/drivers/i2c/busses/Kconfig
++++ b/drivers/i2c/busses/Kconfig
+@@ -658,6 +658,10 @@ config I2C_RIIC
+ This driver can also be built as a module. If so, the module
+ will be called i2c-riic.
+
++config I2C_RALINK
++ tristate "Ralink I2C Controller"
++ select OF_I2C
++
+ config HAVE_S3C2410_I2C
+ bool
+ help
+diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
+index a08931f..9682895 100644
+--- a/drivers/i2c/busses/Makefile
++++ b/drivers/i2c/busses/Makefile
+@@ -63,6 +63,7 @@ obj-$(CONFIG_I2C_PNX) += i2c-pnx.o
+ obj-$(CONFIG_I2C_PUV3) += i2c-puv3.o
+ obj-$(CONFIG_I2C_PXA) += i2c-pxa.o
+ obj-$(CONFIG_I2C_PXA_PCI) += i2c-pxa-pci.o
++obj-$(CONFIG_I2C_RALINK) += i2c-ralink.o
+ obj-$(CONFIG_I2C_RIIC) += i2c-riic.o
+ obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o
+ obj-$(CONFIG_I2C_S6000) += i2c-s6000.o
+diff --git a/drivers/i2c/busses/i2c-ralink.c b/drivers/i2c/busses/i2c-ralink.c
+new file mode 100644
+index 0000000..f4dc13d
+--- /dev/null
++++ b/drivers/i2c/busses/i2c-ralink.c
+@@ -0,0 +1,274 @@
++/*
++ * drivers/i2c/busses/i2c-ralink.c
++ *
++ * Copyright (C) 2013 Steven Liu <steven_liu@mediatek.com>
++ *
++ * This software is licensed under the terms of the GNU General Public
++ * License version 2, as published by the Free Software Foundation, and
++ * may be copied, distributed, and modified under those terms.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ */
++
++#include <linux/interrupt.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/reset.h>
++#include <linux/delay.h>
++#include <linux/slab.h>
++#include <linux/init.h>
++#include <linux/errno.h>
++#include <linux/platform_device.h>
++#include <linux/i2c.h>
++#include <linux/io.h>
++#include <linux/of_i2c.h>
++#include <linux/err.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#define REG_CONFIG_REG 0x00
++#define REG_CLKDIV_REG 0x04
++#define REG_DEVADDR_REG 0x08
++#define REG_ADDR_REG 0x0C
++#define REG_DATAOUT_REG 0x10
++#define REG_DATAIN_REG 0x14
++#define REG_STATUS_REG 0x18
++#define REG_STARTXFR_REG 0x1C
++#define REG_BYTECNT_REG 0x20
++
++#define I2C_STARTERR BIT(4)
++#define I2C_ACKERR BIT(3)
++#define I2C_DATARDY BIT(2)
++#define I2C_SDOEMPTY BIT(1)
++#define I2C_BUSY BIT(0)
++
++#define I2C_DEVADLEN_7 (6 << 2)
++#define I2C_ADDRDIS BIT(1)
++
++#define I2C_RETRY 0x400
++
++#define CLKDIV_VALUE 200 // clock rate is 40M, 40M / (200*2) = 100k (standard i2c bus rate).
++//#define CLKDIV_VALUE 50 // clock rate is 40M, 40M / (50*2) = 400k (fast i2c bus rate).
++
++#define READ_CMD 0x01
++#define WRITE_CMD 0x00
++#define READ_BLOCK 64
++
++static void __iomem *membase;
++static struct i2c_adapter *adapter;
++
++static void rt_i2c_w32(u32 val, unsigned reg)
++{
++ iowrite32(val, membase + reg);
++}
++
++static u32 rt_i2c_r32(unsigned reg)
++{
++ return ioread32(membase + reg);
++}
++
++static inline int rt_i2c_wait_rx_done(void)
++{
++ int retries = I2C_RETRY;
++
++ do {
++ if (!retries--)
++ break;
++ } while(!(rt_i2c_r32(REG_STATUS_REG) & I2C_DATARDY));
++
++ return (retries < 0);
++}
++
++static inline int rt_i2c_wait_idle(void)
++{
++ int retries = I2C_RETRY;
++
++ do {
++ if (!retries--)
++ break;
++ } while(rt_i2c_r32(REG_STATUS_REG) & I2C_BUSY);
++
++ return (retries < 0);
++}
++
++static inline int rt_i2c_wait_tx_done(void)
++{
++ int retries = I2C_RETRY;
++
++ do {
++ if (!retries--)
++ break;
++ } while(!(rt_i2c_r32(REG_STATUS_REG) & I2C_SDOEMPTY));
++
++ return (retries < 0);
++}
++
++static int rt_i2c_handle_msg(struct i2c_adapter *a, struct i2c_msg* msg)
++{
++ int i = 0, j = 0, pos = 0;
++ int nblock = msg->len / READ_BLOCK;
++ int rem = msg->len % READ_BLOCK;
++
++ if (msg->flags & I2C_M_TEN) {
++ printk("10 bits addr not supported\n");
++ return -EINVAL;
++ }
++
++ if (msg->flags & I2C_M_RD) {
++ for (i = 0; i < nblock; i++) {
++ rt_i2c_wait_idle();
++ rt_i2c_w32(READ_BLOCK - 1, REG_BYTECNT_REG);
++ rt_i2c_w32(READ_CMD, REG_STARTXFR_REG);
++ for (j = 0; j < READ_BLOCK; j++) {
++ if (rt_i2c_wait_rx_done())
++ return -1;
++ msg->buf[pos++] = rt_i2c_r32(REG_DATAIN_REG);
++ }
++ }
++
++ rt_i2c_wait_idle();
++ rt_i2c_w32(rem - 1, REG_BYTECNT_REG);
++ rt_i2c_w32(READ_CMD, REG_STARTXFR_REG);
++ for (i = 0; i < rem; i++) {
++ if (rt_i2c_wait_rx_done())
++ return -1;
++ msg->buf[pos++] = rt_i2c_r32(REG_DATAIN_REG);
++ }
++ } else {
++ rt_i2c_wait_idle();
++ rt_i2c_w32(msg->len - 1, REG_BYTECNT_REG);
++ for (i = 0; i < msg->len; i++) {
++ rt_i2c_w32(msg->buf[i], REG_DATAOUT_REG);
++ rt_i2c_w32(WRITE_CMD, REG_STARTXFR_REG);
++ if (rt_i2c_wait_tx_done())
++ return -1;
++ }
++ }
++
++ return 0;
++}
++
++static int rt_i2c_master_xfer(struct i2c_adapter *a, struct i2c_msg *m, int n)
++{
++ int i = 0;
++ int ret = 0;
++
++ if (rt_i2c_wait_idle()) {
++ printk("i2c transfer failed\n");
++ return 0;
++ }
++
++ device_reset(a->dev.parent);
++
++ rt_i2c_w32(m->addr, REG_DEVADDR_REG);
++ rt_i2c_w32(I2C_DEVADLEN_7 | I2C_ADDRDIS, REG_CONFIG_REG);
++ rt_i2c_w32(CLKDIV_VALUE, REG_CLKDIV_REG);
++
++ for (i = 0; i < n && !ret; i++)
++ ret = rt_i2c_handle_msg(a, &m[i]);
++
++ if (ret) {
++ printk("i2c transfer failed\n");
++ return 0;
++ }
++
++ return n;
++}
++
++static u32 rt_i2c_func(struct i2c_adapter *a)
++{
++ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
++}
++
++static const struct i2c_algorithm rt_i2c_algo = {
++ .master_xfer = rt_i2c_master_xfer,
++ .functionality = rt_i2c_func,
++};
++
++static int rt_i2c_probe(struct platform_device *pdev)
++{
++ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ int ret;
++
++ if (!res) {
++ dev_err(&pdev->dev, "no memory resource found\n");
++ return -ENODEV;
++ }
++
++ adapter = devm_kzalloc(&pdev->dev, sizeof(struct i2c_adapter), GFP_KERNEL);
++ if (!adapter) {
++ dev_err(&pdev->dev, "failed to allocate i2c_adapter\n");
++ return -ENOMEM;
++ }
++
++ membase = devm_request_and_ioremap(&pdev->dev, res);
++ if (IS_ERR(membase))
++ return PTR_ERR(membase);
++
++ strlcpy(adapter->name, dev_name(&pdev->dev), sizeof(adapter->name));
++ adapter->owner = THIS_MODULE;
++ adapter->nr = pdev->id;
++ adapter->timeout = HZ;
++ adapter->algo = &rt_i2c_algo;
++ adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
++ adapter->dev.parent = &pdev->dev;
++ adapter->dev.of_node = pdev->dev.of_node;
++
++ ret = i2c_add_numbered_adapter(adapter);
++ if (ret)
++ return ret;
++
++ of_i2c_register_devices(adapter);
++
++ platform_set_drvdata(pdev, adapter);
++
++ dev_info(&pdev->dev, "loaded\n");
++
++ return 0;
++}
++
++static int rt_i2c_remove(struct platform_device *pdev)
++{
++ platform_set_drvdata(pdev, NULL);
++
++ return 0;
++}
++
++static const struct of_device_id i2c_rt_dt_ids[] = {
++ { .compatible = "ralink,rt2880-i2c", },
++ { /* sentinel */ }
++};
++
++MODULE_DEVICE_TABLE(of, i2c_rt_dt_ids);
++
++static struct platform_driver rt_i2c_driver = {
++ .probe = rt_i2c_probe,
++ .remove = rt_i2c_remove,
++ .driver = {
++ .owner = THIS_MODULE,
++ .name = "i2c-ralink",
++ .of_match_table = i2c_rt_dt_ids,
++ },
++};
++
++static int __init i2c_rt_init (void)
++{
++ return platform_driver_register(&rt_i2c_driver);
++}
++subsys_initcall(i2c_rt_init);
++
++static void __exit i2c_rt_exit (void)
++{
++ platform_driver_unregister(&rt_i2c_driver);
++}
++
++module_exit (i2c_rt_exit);
++
++MODULE_AUTHOR("Steven Liu <steven_liu@mediatek.com>");
++MODULE_DESCRIPTION("Ralink I2c host driver");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:Ralink-I2C");
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0053-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch b/target/linux/ramips/patches-3.14/0053-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch
new file mode 100644
index 0000000000..8470dde873
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0053-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch
@@ -0,0 +1,3446 @@
+From 0bfcde91fbb0a11bfe9ec61916285ffc4d2b7711 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 27 Jul 2014 09:55:05 +0100
+Subject: [PATCH 53/57] mmc: MIPS: ralink: add sdhci for mt7620a SoC
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/mmc/host/Kconfig | 11 +
+ drivers/mmc/host/Makefile | 1 +
+ drivers/mmc/host/mt6575_sd.h | 1068 ++++++++++++++++++
+ drivers/mmc/host/sdhci-mt7620.c | 2314 +++++++++++++++++++++++++++++++++++++++
+ 4 files changed, 3394 insertions(+)
+ create mode 100644 drivers/mmc/host/mt6575_sd.h
+ create mode 100644 drivers/mmc/host/sdhci-mt7620.c
+
+diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
+index 1384f67..09a14cb 100644
+--- a/drivers/mmc/host/Kconfig
++++ b/drivers/mmc/host/Kconfig
+@@ -283,6 +283,17 @@ config MMC_SDHCI_BCM2835
+
+ If unsure, say N.
+
++config MMC_SDHCI_MT7620
++ tristate "SDHCI platform support for the MT7620 SD/MMC Controller"
++ depends on SOC_MT7620
++ depends on MMC_SDHCI_PLTFM
++ select MMC_SDHCI_IO_ACCESSORS
++ help
++ This selects the BCM2835 SD/MMC controller. If you have a BCM2835
++ platform with SD or MMC devices, say Y or M here.
++
++ If unsure, say N.
++
+ config MMC_OMAP
+ tristate "TI OMAP Multimedia Card Interface support"
+ depends on ARCH_OMAP
+diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
+index 3483b6b..430824f 100644
+--- a/drivers/mmc/host/Makefile
++++ b/drivers/mmc/host/Makefile
+@@ -64,6 +64,7 @@ obj-$(CONFIG_MMC_SDHCI_OF_ESDHC) += sdhci-of-esdhc.o
+ obj-$(CONFIG_MMC_SDHCI_OF_HLWD) += sdhci-of-hlwd.o
+ obj-$(CONFIG_MMC_SDHCI_BCM_KONA) += sdhci-bcm-kona.o
+ obj-$(CONFIG_MMC_SDHCI_BCM2835) += sdhci-bcm2835.o
++obj-$(CONFIG_MMC_SDHCI_MT7620) += sdhci-mt7620.o
+
+ ifeq ($(CONFIG_CB710_DEBUG),y)
+ CFLAGS-cb710-mmc += -DDEBUG
+diff --git a/drivers/mmc/host/mt6575_sd.h b/drivers/mmc/host/mt6575_sd.h
+new file mode 100644
+index 0000000..406382c
+--- /dev/null
++++ b/drivers/mmc/host/mt6575_sd.h
+@@ -0,0 +1,1068 @@
++/* Copyright Statement:
++ *
++ * This software/firmware and related documentation ("MediaTek Software") are
++ * protected under relevant copyright laws. The information contained herein
++ * is confidential and proprietary to MediaTek Inc. and/or its licensors.
++ * Without the prior written permission of MediaTek inc. and/or its licensors,
++ * any reproduction, modification, use or disclosure of MediaTek Software,
++ * and information contained herein, in whole or in part, shall be strictly prohibited.
++ */
++/* MediaTek Inc. (C) 2010. All rights reserved.
++ *
++ * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
++ * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
++ * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON
++ * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
++ * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
++ * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
++ * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH
++ * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES
++ * THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES
++ * CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK
++ * SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
++ * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND
++ * CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
++ * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
++ * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO
++ * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
++ *
++ * The following software/firmware and/or related documentation ("MediaTek Software")
++ * have been modified by MediaTek Inc. All revisions are subject to any receiver's
++ * applicable license agreements with MediaTek Inc.
++ */
++
++#ifndef MT6575_SD_H
++#define MT6575_SD_H
++
++#include <linux/bitops.h>
++#include <linux/mmc/host.h>
++
++// #include <mach/mt6575_reg_base.h> /* --- by chhung */
++
++typedef void (*sdio_irq_handler_t)(void*); /* external irq handler */
++typedef void (*pm_callback_t)(pm_message_t state, void *data);
++
++#define MSDC_CD_PIN_EN (1 << 0) /* card detection pin is wired */
++#define MSDC_WP_PIN_EN (1 << 1) /* write protection pin is wired */
++#define MSDC_RST_PIN_EN (1 << 2) /* emmc reset pin is wired */
++#define MSDC_SDIO_IRQ (1 << 3) /* use internal sdio irq (bus) */
++#define MSDC_EXT_SDIO_IRQ (1 << 4) /* use external sdio irq */
++#define MSDC_REMOVABLE (1 << 5) /* removable slot */
++#define MSDC_SYS_SUSPEND (1 << 6) /* suspended by system */
++#define MSDC_HIGHSPEED (1 << 7) /* high-speed mode support */
++#define MSDC_UHS1 (1 << 8) /* uhs-1 mode support */
++#define MSDC_DDR (1 << 9) /* ddr mode support */
++#define MSDC_SPE (1 << 10) /* special support */
++#define MSDC_INTERNAL_CLK (1 << 11) /* Force Internal clock */
++#define MSDC_TABDRV (1 << 12) /* TABLET */
++
++
++#define MSDC_SMPL_RISING (0)
++#define MSDC_SMPL_FALLING (1)
++
++#define MSDC_CMD_PIN (0)
++#define MSDC_DAT_PIN (1)
++#define MSDC_CD_PIN (2)
++#define MSDC_WP_PIN (3)
++#define MSDC_RST_PIN (4)
++
++enum {
++ MSDC_CLKSRC_26MHZ = 0,
++ MSDC_CLKSRC_197MHZ = 1,
++ MSDC_CLKSRC_208MHZ = 2
++};
++
++struct msdc_hw {
++ unsigned char clk_src; /* host clock source */
++ unsigned char cmd_edge; /* command latch edge */
++ unsigned char data_edge; /* data latch edge */
++ unsigned char clk_drv; /* clock pad driving */
++ unsigned char cmd_drv; /* command pad driving */
++ unsigned char dat_drv; /* data pad driving */
++ unsigned long flags; /* hardware capability flags */
++ unsigned long data_pins; /* data pins */
++ unsigned long data_offset; /* data address offset */
++
++ /* config gpio pull mode */
++ void (*config_gpio_pin)(int type, int pull);
++
++ /* external power control for card */
++ void (*ext_power_on)(void);
++ void (*ext_power_off)(void);
++
++ /* external sdio irq operations */
++ void (*request_sdio_eirq)(sdio_irq_handler_t sdio_irq_handler, void *data);
++ void (*enable_sdio_eirq)(void);
++ void (*disable_sdio_eirq)(void);
++
++ /* external cd irq operations */
++ void (*request_cd_eirq)(sdio_irq_handler_t cd_irq_handler, void *data);
++ void (*enable_cd_eirq)(void);
++ void (*disable_cd_eirq)(void);
++ int (*get_cd_status)(void);
++
++ /* power management callback for external module */
++ void (*register_pm)(pm_callback_t pm_cb, void *data);
++};
++
++extern struct msdc_hw msdc0_hw;
++extern struct msdc_hw msdc1_hw;
++extern struct msdc_hw msdc2_hw;
++extern struct msdc_hw msdc3_hw;
++
++
++/*--------------------------------------------------------------------------*/
++/* Common Macro */
++/*--------------------------------------------------------------------------*/
++#define REG_ADDR(x) ((volatile u32*)(base + OFFSET_##x))
++
++/*--------------------------------------------------------------------------*/
++/* Common Definition */
++/*--------------------------------------------------------------------------*/
++#define MSDC_FIFO_SZ (128)
++#define MSDC_FIFO_THD (64) // (128)
++#define MSDC_NUM (4)
++
++#define MSDC_MS (0)
++#define MSDC_SDMMC (1)
++
++#define MSDC_MODE_UNKNOWN (0)
++#define MSDC_MODE_PIO (1)
++#define MSDC_MODE_DMA_BASIC (2)
++#define MSDC_MODE_DMA_DESC (3)
++#define MSDC_MODE_DMA_ENHANCED (4)
++#define MSDC_MODE_MMC_STREAM (5)
++
++#define MSDC_BUS_1BITS (0)
++#define MSDC_BUS_4BITS (1)
++#define MSDC_BUS_8BITS (2)
++
++#define MSDC_BRUST_8B (3)
++#define MSDC_BRUST_16B (4)
++#define MSDC_BRUST_32B (5)
++#define MSDC_BRUST_64B (6)
++
++#define MSDC_PIN_PULL_NONE (0)
++#define MSDC_PIN_PULL_DOWN (1)
++#define MSDC_PIN_PULL_UP (2)
++#define MSDC_PIN_KEEP (3)
++
++#define MSDC_MAX_SCLK (48000000) /* +/- by chhung */
++#define MSDC_MIN_SCLK (260000)
++
++#define MSDC_AUTOCMD12 (0x0001)
++#define MSDC_AUTOCMD23 (0x0002)
++#define MSDC_AUTOCMD19 (0x0003)
++
++#define MSDC_EMMC_BOOTMODE0 (0) /* Pull low CMD mode */
++#define MSDC_EMMC_BOOTMODE1 (1) /* Reset CMD mode */
++
++enum {
++ RESP_NONE = 0,
++ RESP_R1,
++ RESP_R2,
++ RESP_R3,
++ RESP_R4,
++ RESP_R5,
++ RESP_R6,
++ RESP_R7,
++ RESP_R1B
++};
++
++/*--------------------------------------------------------------------------*/
++/* Register Offset */
++/*--------------------------------------------------------------------------*/
++#define OFFSET_MSDC_CFG (0x0)
++#define OFFSET_MSDC_IOCON (0x04)
++#define OFFSET_MSDC_PS (0x08)
++#define OFFSET_MSDC_INT (0x0c)
++#define OFFSET_MSDC_INTEN (0x10)
++#define OFFSET_MSDC_FIFOCS (0x14)
++#define OFFSET_MSDC_TXDATA (0x18)
++#define OFFSET_MSDC_RXDATA (0x1c)
++#define OFFSET_SDC_CFG (0x30)
++#define OFFSET_SDC_CMD (0x34)
++#define OFFSET_SDC_ARG (0x38)
++#define OFFSET_SDC_STS (0x3c)
++#define OFFSET_SDC_RESP0 (0x40)
++#define OFFSET_SDC_RESP1 (0x44)
++#define OFFSET_SDC_RESP2 (0x48)
++#define OFFSET_SDC_RESP3 (0x4c)
++#define OFFSET_SDC_BLK_NUM (0x50)
++#define OFFSET_SDC_CSTS (0x58)
++#define OFFSET_SDC_CSTS_EN (0x5c)
++#define OFFSET_SDC_DCRC_STS (0x60)
++#define OFFSET_EMMC_CFG0 (0x70)
++#define OFFSET_EMMC_CFG1 (0x74)
++#define OFFSET_EMMC_STS (0x78)
++#define OFFSET_EMMC_IOCON (0x7c)
++#define OFFSET_SDC_ACMD_RESP (0x80)
++#define OFFSET_SDC_ACMD19_TRG (0x84)
++#define OFFSET_SDC_ACMD19_STS (0x88)
++#define OFFSET_MSDC_DMA_SA (0x90)
++#define OFFSET_MSDC_DMA_CA (0x94)
++#define OFFSET_MSDC_DMA_CTRL (0x98)
++#define OFFSET_MSDC_DMA_CFG (0x9c)
++#define OFFSET_MSDC_DBG_SEL (0xa0)
++#define OFFSET_MSDC_DBG_OUT (0xa4)
++#define OFFSET_MSDC_PATCH_BIT (0xb0)
++#define OFFSET_MSDC_PATCH_BIT1 (0xb4)
++#define OFFSET_MSDC_PAD_CTL0 (0xe0)
++#define OFFSET_MSDC_PAD_CTL1 (0xe4)
++#define OFFSET_MSDC_PAD_CTL2 (0xe8)
++#define OFFSET_MSDC_PAD_TUNE (0xec)
++#define OFFSET_MSDC_DAT_RDDLY0 (0xf0)
++#define OFFSET_MSDC_DAT_RDDLY1 (0xf4)
++#define OFFSET_MSDC_HW_DBG (0xf8)
++#define OFFSET_MSDC_VERSION (0x100)
++#define OFFSET_MSDC_ECO_VER (0x104)
++
++/*--------------------------------------------------------------------------*/
++/* Register Address */
++/*--------------------------------------------------------------------------*/
++
++/* common register */
++#define MSDC_CFG REG_ADDR(MSDC_CFG)
++#define MSDC_IOCON REG_ADDR(MSDC_IOCON)
++#define MSDC_PS REG_ADDR(MSDC_PS)
++#define MSDC_INT REG_ADDR(MSDC_INT)
++#define MSDC_INTEN REG_ADDR(MSDC_INTEN)
++#define MSDC_FIFOCS REG_ADDR(MSDC_FIFOCS)
++#define MSDC_TXDATA REG_ADDR(MSDC_TXDATA)
++#define MSDC_RXDATA REG_ADDR(MSDC_RXDATA)
++#define MSDC_PATCH_BIT0 REG_ADDR(MSDC_PATCH_BIT)
++
++/* sdmmc register */
++#define SDC_CFG REG_ADDR(SDC_CFG)
++#define SDC_CMD REG_ADDR(SDC_CMD)
++#define SDC_ARG REG_ADDR(SDC_ARG)
++#define SDC_STS REG_ADDR(SDC_STS)
++#define SDC_RESP0 REG_ADDR(SDC_RESP0)
++#define SDC_RESP1 REG_ADDR(SDC_RESP1)
++#define SDC_RESP2 REG_ADDR(SDC_RESP2)
++#define SDC_RESP3 REG_ADDR(SDC_RESP3)
++#define SDC_BLK_NUM REG_ADDR(SDC_BLK_NUM)
++#define SDC_CSTS REG_ADDR(SDC_CSTS)
++#define SDC_CSTS_EN REG_ADDR(SDC_CSTS_EN)
++#define SDC_DCRC_STS REG_ADDR(SDC_DCRC_STS)
++
++/* emmc register*/
++#define EMMC_CFG0 REG_ADDR(EMMC_CFG0)
++#define EMMC_CFG1 REG_ADDR(EMMC_CFG1)
++#define EMMC_STS REG_ADDR(EMMC_STS)
++#define EMMC_IOCON REG_ADDR(EMMC_IOCON)
++
++/* auto command register */
++#define SDC_ACMD_RESP REG_ADDR(SDC_ACMD_RESP)
++#define SDC_ACMD19_TRG REG_ADDR(SDC_ACMD19_TRG)
++#define SDC_ACMD19_STS REG_ADDR(SDC_ACMD19_STS)
++
++/* dma register */
++#define MSDC_DMA_SA REG_ADDR(MSDC_DMA_SA)
++#define MSDC_DMA_CA REG_ADDR(MSDC_DMA_CA)
++#define MSDC_DMA_CTRL REG_ADDR(MSDC_DMA_CTRL)
++#define MSDC_DMA_CFG REG_ADDR(MSDC_DMA_CFG)
++
++/* pad ctrl register */
++#define MSDC_PAD_CTL0 REG_ADDR(MSDC_PAD_CTL0)
++#define MSDC_PAD_CTL1 REG_ADDR(MSDC_PAD_CTL1)
++#define MSDC_PAD_CTL2 REG_ADDR(MSDC_PAD_CTL2)
++
++/* data read delay */
++#define MSDC_DAT_RDDLY0 REG_ADDR(MSDC_DAT_RDDLY0)
++#define MSDC_DAT_RDDLY1 REG_ADDR(MSDC_DAT_RDDLY1)
++
++/* debug register */
++#define MSDC_DBG_SEL REG_ADDR(MSDC_DBG_SEL)
++#define MSDC_DBG_OUT REG_ADDR(MSDC_DBG_OUT)
++
++/* misc register */
++#define MSDC_PATCH_BIT REG_ADDR(MSDC_PATCH_BIT)
++#define MSDC_PATCH_BIT1 REG_ADDR(MSDC_PATCH_BIT1)
++#define MSDC_PAD_TUNE REG_ADDR(MSDC_PAD_TUNE)
++#define MSDC_HW_DBG REG_ADDR(MSDC_HW_DBG)
++#define MSDC_VERSION REG_ADDR(MSDC_VERSION)
++#define MSDC_ECO_VER REG_ADDR(MSDC_ECO_VER) /* ECO Version */
++
++/*--------------------------------------------------------------------------*/
++/* Register Mask */
++/*--------------------------------------------------------------------------*/
++
++/* MSDC_CFG mask */
++#define MSDC_CFG_MODE (0x1 << 0) /* RW */
++#define MSDC_CFG_CKPDN (0x1 << 1) /* RW */
++#define MSDC_CFG_RST (0x1 << 2) /* RW */
++#define MSDC_CFG_PIO (0x1 << 3) /* RW */
++#define MSDC_CFG_CKDRVEN (0x1 << 4) /* RW */
++#define MSDC_CFG_BV18SDT (0x1 << 5) /* RW */
++#define MSDC_CFG_BV18PSS (0x1 << 6) /* R */
++#define MSDC_CFG_CKSTB (0x1 << 7) /* R */
++#define MSDC_CFG_CKDIV (0xff << 8) /* RW */
++#define MSDC_CFG_CKMOD (0x3 << 16) /* RW */
++
++/* MSDC_IOCON mask */
++#define MSDC_IOCON_SDR104CKS (0x1 << 0) /* RW */
++#define MSDC_IOCON_RSPL (0x1 << 1) /* RW */
++#define MSDC_IOCON_DSPL (0x1 << 2) /* RW */
++#define MSDC_IOCON_DDLSEL (0x1 << 3) /* RW */
++#define MSDC_IOCON_DDR50CKD (0x1 << 4) /* RW */
++#define MSDC_IOCON_DSPLSEL (0x1 << 5) /* RW */
++#define MSDC_IOCON_D0SPL (0x1 << 16) /* RW */
++#define MSDC_IOCON_D1SPL (0x1 << 17) /* RW */
++#define MSDC_IOCON_D2SPL (0x1 << 18) /* RW */
++#define MSDC_IOCON_D3SPL (0x1 << 19) /* RW */
++#define MSDC_IOCON_D4SPL (0x1 << 20) /* RW */
++#define MSDC_IOCON_D5SPL (0x1 << 21) /* RW */
++#define MSDC_IOCON_D6SPL (0x1 << 22) /* RW */
++#define MSDC_IOCON_D7SPL (0x1 << 23) /* RW */
++#define MSDC_IOCON_RISCSZ (0x3 << 24) /* RW */
++
++/* MSDC_PS mask */
++#define MSDC_PS_CDEN (0x1 << 0) /* RW */
++#define MSDC_PS_CDSTS (0x1 << 1) /* R */
++#define MSDC_PS_CDDEBOUNCE (0xf << 12) /* RW */
++#define MSDC_PS_DAT (0xff << 16) /* R */
++#define MSDC_PS_CMD (0x1 << 24) /* R */
++#define MSDC_PS_WP (0x1UL<< 31) /* R */
++
++/* MSDC_INT mask */
++#define MSDC_INT_MMCIRQ (0x1 << 0) /* W1C */
++#define MSDC_INT_CDSC (0x1 << 1) /* W1C */
++#define MSDC_INT_ACMDRDY (0x1 << 3) /* W1C */
++#define MSDC_INT_ACMDTMO (0x1 << 4) /* W1C */
++#define MSDC_INT_ACMDCRCERR (0x1 << 5) /* W1C */
++#define MSDC_INT_DMAQ_EMPTY (0x1 << 6) /* W1C */
++#define MSDC_INT_SDIOIRQ (0x1 << 7) /* W1C */
++#define MSDC_INT_CMDRDY (0x1 << 8) /* W1C */
++#define MSDC_INT_CMDTMO (0x1 << 9) /* W1C */
++#define MSDC_INT_RSPCRCERR (0x1 << 10) /* W1C */
++#define MSDC_INT_CSTA (0x1 << 11) /* R */
++#define MSDC_INT_XFER_COMPL (0x1 << 12) /* W1C */
++#define MSDC_INT_DXFER_DONE (0x1 << 13) /* W1C */
++#define MSDC_INT_DATTMO (0x1 << 14) /* W1C */
++#define MSDC_INT_DATCRCERR (0x1 << 15) /* W1C */
++#define MSDC_INT_ACMD19_DONE (0x1 << 16) /* W1C */
++
++/* MSDC_INTEN mask */
++#define MSDC_INTEN_MMCIRQ (0x1 << 0) /* RW */
++#define MSDC_INTEN_CDSC (0x1 << 1) /* RW */
++#define MSDC_INTEN_ACMDRDY (0x1 << 3) /* RW */
++#define MSDC_INTEN_ACMDTMO (0x1 << 4) /* RW */
++#define MSDC_INTEN_ACMDCRCERR (0x1 << 5) /* RW */
++#define MSDC_INTEN_DMAQ_EMPTY (0x1 << 6) /* RW */
++#define MSDC_INTEN_SDIOIRQ (0x1 << 7) /* RW */
++#define MSDC_INTEN_CMDRDY (0x1 << 8) /* RW */
++#define MSDC_INTEN_CMDTMO (0x1 << 9) /* RW */
++#define MSDC_INTEN_RSPCRCERR (0x1 << 10) /* RW */
++#define MSDC_INTEN_CSTA (0x1 << 11) /* RW */
++#define MSDC_INTEN_XFER_COMPL (0x1 << 12) /* RW */
++#define MSDC_INTEN_DXFER_DONE (0x1 << 13) /* RW */
++#define MSDC_INTEN_DATTMO (0x1 << 14) /* RW */
++#define MSDC_INTEN_DATCRCERR (0x1 << 15) /* RW */
++#define MSDC_INTEN_ACMD19_DONE (0x1 << 16) /* RW */
++
++/* MSDC_FIFOCS mask */
++#define MSDC_FIFOCS_RXCNT (0xff << 0) /* R */
++#define MSDC_FIFOCS_TXCNT (0xff << 16) /* R */
++#define MSDC_FIFOCS_CLR (0x1UL<< 31) /* RW */
++
++/* SDC_CFG mask */
++#define SDC_CFG_SDIOINTWKUP (0x1 << 0) /* RW */
++#define SDC_CFG_INSWKUP (0x1 << 1) /* RW */
++#define SDC_CFG_BUSWIDTH (0x3 << 16) /* RW */
++#define SDC_CFG_SDIO (0x1 << 19) /* RW */
++#define SDC_CFG_SDIOIDE (0x1 << 20) /* RW */
++#define SDC_CFG_INTATGAP (0x1 << 21) /* RW */
++#define SDC_CFG_DTOC (0xffUL << 24) /* RW */
++
++/* SDC_CMD mask */
++#define SDC_CMD_OPC (0x3f << 0) /* RW */
++#define SDC_CMD_BRK (0x1 << 6) /* RW */
++#define SDC_CMD_RSPTYP (0x7 << 7) /* RW */
++#define SDC_CMD_DTYP (0x3 << 11) /* RW */
++#define SDC_CMD_DTYP (0x3 << 11) /* RW */
++#define SDC_CMD_RW (0x1 << 13) /* RW */
++#define SDC_CMD_STOP (0x1 << 14) /* RW */
++#define SDC_CMD_GOIRQ (0x1 << 15) /* RW */
++#define SDC_CMD_BLKLEN (0xfff<< 16) /* RW */
++#define SDC_CMD_AUTOCMD (0x3 << 28) /* RW */
++#define SDC_CMD_VOLSWTH (0x1 << 30) /* RW */
++
++/* SDC_STS mask */
++#define SDC_STS_SDCBUSY (0x1 << 0) /* RW */
++#define SDC_STS_CMDBUSY (0x1 << 1) /* RW */
++#define SDC_STS_SWR_COMPL (0x1 << 31) /* RW */
++
++/* SDC_DCRC_STS mask */
++#define SDC_DCRC_STS_NEG (0xf << 8) /* RO */
++#define SDC_DCRC_STS_POS (0xff << 0) /* RO */
++
++/* EMMC_CFG0 mask */
++#define EMMC_CFG0_BOOTSTART (0x1 << 0) /* W */
++#define EMMC_CFG0_BOOTSTOP (0x1 << 1) /* W */
++#define EMMC_CFG0_BOOTMODE (0x1 << 2) /* RW */
++#define EMMC_CFG0_BOOTACKDIS (0x1 << 3) /* RW */
++#define EMMC_CFG0_BOOTWDLY (0x7 << 12) /* RW */
++#define EMMC_CFG0_BOOTSUPP (0x1 << 15) /* RW */
++
++/* EMMC_CFG1 mask */
++#define EMMC_CFG1_BOOTDATTMC (0xfffff << 0) /* RW */
++#define EMMC_CFG1_BOOTACKTMC (0xfffUL << 20) /* RW */
++
++/* EMMC_STS mask */
++#define EMMC_STS_BOOTCRCERR (0x1 << 0) /* W1C */
++#define EMMC_STS_BOOTACKERR (0x1 << 1) /* W1C */
++#define EMMC_STS_BOOTDATTMO (0x1 << 2) /* W1C */
++#define EMMC_STS_BOOTACKTMO (0x1 << 3) /* W1C */
++#define EMMC_STS_BOOTUPSTATE (0x1 << 4) /* R */
++#define EMMC_STS_BOOTACKRCV (0x1 << 5) /* W1C */
++#define EMMC_STS_BOOTDATRCV (0x1 << 6) /* R */
++
++/* EMMC_IOCON mask */
++#define EMMC_IOCON_BOOTRST (0x1 << 0) /* RW */
++
++/* SDC_ACMD19_TRG mask */
++#define SDC_ACMD19_TRG_TUNESEL (0xf << 0) /* RW */
++
++/* MSDC_DMA_CTRL mask */
++#define MSDC_DMA_CTRL_START (0x1 << 0) /* W */
++#define MSDC_DMA_CTRL_STOP (0x1 << 1) /* W */
++#define MSDC_DMA_CTRL_RESUME (0x1 << 2) /* W */
++#define MSDC_DMA_CTRL_MODE (0x1 << 8) /* RW */
++#define MSDC_DMA_CTRL_LASTBUF (0x1 << 10) /* RW */
++#define MSDC_DMA_CTRL_BRUSTSZ (0x7 << 12) /* RW */
++#define MSDC_DMA_CTRL_XFERSZ (0xffffUL << 16)/* RW */
++
++/* MSDC_DMA_CFG mask */
++#define MSDC_DMA_CFG_STS (0x1 << 0) /* R */
++#define MSDC_DMA_CFG_DECSEN (0x1 << 1) /* RW */
++#define MSDC_DMA_CFG_BDCSERR (0x1 << 4) /* R */
++#define MSDC_DMA_CFG_GPDCSERR (0x1 << 5) /* R */
++
++/* MSDC_PATCH_BIT mask */
++#define MSDC_PATCH_BIT_WFLSMODE (0x1 << 0) /* RW */
++#define MSDC_PATCH_BIT_ODDSUPP (0x1 << 1) /* RW */
++#define MSDC_PATCH_BIT_CKGEN_CK (0x1 << 6) /* E2: Fixed to 1 */
++#define MSDC_PATCH_BIT_IODSSEL (0x1 << 16) /* RW */
++#define MSDC_PATCH_BIT_IOINTSEL (0x1 << 17) /* RW */
++#define MSDC_PATCH_BIT_BUSYDLY (0xf << 18) /* RW */
++#define MSDC_PATCH_BIT_WDOD (0xf << 22) /* RW */
++#define MSDC_PATCH_BIT_IDRTSEL (0x1 << 26) /* RW */
++#define MSDC_PATCH_BIT_CMDFSEL (0x1 << 27) /* RW */
++#define MSDC_PATCH_BIT_INTDLSEL (0x1 << 28) /* RW */
++#define MSDC_PATCH_BIT_SPCPUSH (0x1 << 29) /* RW */
++#define MSDC_PATCH_BIT_DECRCTMO (0x1 << 30) /* RW */
++
++/* MSDC_PATCH_BIT1 mask */
++#define MSDC_PATCH_BIT1_WRDAT_CRCS (0x7 << 3)
++#define MSDC_PATCH_BIT1_CMD_RSP (0x7 << 0)
++
++/* MSDC_PAD_CTL0 mask */
++#define MSDC_PAD_CTL0_CLKDRVN (0x7 << 0) /* RW */
++#define MSDC_PAD_CTL0_CLKDRVP (0x7 << 4) /* RW */
++#define MSDC_PAD_CTL0_CLKSR (0x1 << 8) /* RW */
++#define MSDC_PAD_CTL0_CLKPD (0x1 << 16) /* RW */
++#define MSDC_PAD_CTL0_CLKPU (0x1 << 17) /* RW */
++#define MSDC_PAD_CTL0_CLKSMT (0x1 << 18) /* RW */
++#define MSDC_PAD_CTL0_CLKIES (0x1 << 19) /* RW */
++#define MSDC_PAD_CTL0_CLKTDSEL (0xf << 20) /* RW */
++#define MSDC_PAD_CTL0_CLKRDSEL (0xffUL<< 24) /* RW */
++
++/* MSDC_PAD_CTL1 mask */
++#define MSDC_PAD_CTL1_CMDDRVN (0x7 << 0) /* RW */
++#define MSDC_PAD_CTL1_CMDDRVP (0x7 << 4) /* RW */
++#define MSDC_PAD_CTL1_CMDSR (0x1 << 8) /* RW */
++#define MSDC_PAD_CTL1_CMDPD (0x1 << 16) /* RW */
++#define MSDC_PAD_CTL1_CMDPU (0x1 << 17) /* RW */
++#define MSDC_PAD_CTL1_CMDSMT (0x1 << 18) /* RW */
++#define MSDC_PAD_CTL1_CMDIES (0x1 << 19) /* RW */
++#define MSDC_PAD_CTL1_CMDTDSEL (0xf << 20) /* RW */
++#define MSDC_PAD_CTL1_CMDRDSEL (0xffUL<< 24) /* RW */
++
++/* MSDC_PAD_CTL2 mask */
++#define MSDC_PAD_CTL2_DATDRVN (0x7 << 0) /* RW */
++#define MSDC_PAD_CTL2_DATDRVP (0x7 << 4) /* RW */
++#define MSDC_PAD_CTL2_DATSR (0x1 << 8) /* RW */
++#define MSDC_PAD_CTL2_DATPD (0x1 << 16) /* RW */
++#define MSDC_PAD_CTL2_DATPU (0x1 << 17) /* RW */
++#define MSDC_PAD_CTL2_DATIES (0x1 << 19) /* RW */
++#define MSDC_PAD_CTL2_DATSMT (0x1 << 18) /* RW */
++#define MSDC_PAD_CTL2_DATTDSEL (0xf << 20) /* RW */
++#define MSDC_PAD_CTL2_DATRDSEL (0xffUL<< 24) /* RW */
++
++/* MSDC_PAD_TUNE mask */
++#define MSDC_PAD_TUNE_DATWRDLY (0x1F << 0) /* RW */
++#define MSDC_PAD_TUNE_DATRRDLY (0x1F << 8) /* RW */
++#define MSDC_PAD_TUNE_CMDRDLY (0x1F << 16) /* RW */
++#define MSDC_PAD_TUNE_CMDRRDLY (0x1FUL << 22) /* RW */
++#define MSDC_PAD_TUNE_CLKTXDLY (0x1FUL << 27) /* RW */
++
++/* MSDC_DAT_RDDLY0/1 mask */
++#define MSDC_DAT_RDDLY0_D0 (0x1F << 0) /* RW */
++#define MSDC_DAT_RDDLY0_D1 (0x1F << 8) /* RW */
++#define MSDC_DAT_RDDLY0_D2 (0x1F << 16) /* RW */
++#define MSDC_DAT_RDDLY0_D3 (0x1F << 24) /* RW */
++
++#define MSDC_DAT_RDDLY1_D4 (0x1F << 0) /* RW */
++#define MSDC_DAT_RDDLY1_D5 (0x1F << 8) /* RW */
++#define MSDC_DAT_RDDLY1_D6 (0x1F << 16) /* RW */
++#define MSDC_DAT_RDDLY1_D7 (0x1F << 24) /* RW */
++
++#define MSDC_CKGEN_MSDC_DLY_SEL (0x1F<<10)
++#define MSDC_INT_DAT_LATCH_CK_SEL (0x7<<7)
++#define MSDC_CKGEN_MSDC_CK_SEL (0x1<<6)
++#define CARD_READY_FOR_DATA (1<<8)
++#define CARD_CURRENT_STATE(x) ((x&0x00001E00)>>9)
++
++/*--------------------------------------------------------------------------*/
++/* Descriptor Structure */
++/*--------------------------------------------------------------------------*/
++typedef struct {
++ u32 hwo:1; /* could be changed by hw */
++ u32 bdp:1;
++ u32 rsv0:6;
++ u32 chksum:8;
++ u32 intr:1;
++ u32 rsv1:15;
++ void *next;
++ void *ptr;
++ u32 buflen:16;
++ u32 extlen:8;
++ u32 rsv2:8;
++ u32 arg;
++ u32 blknum;
++ u32 cmd;
++} gpd_t;
++
++typedef struct {
++ u32 eol:1;
++ u32 rsv0:7;
++ u32 chksum:8;
++ u32 rsv1:1;
++ u32 blkpad:1;
++ u32 dwpad:1;
++ u32 rsv2:13;
++ void *next;
++ void *ptr;
++ u32 buflen:16;
++ u32 rsv3:16;
++} bd_t;
++
++/*--------------------------------------------------------------------------*/
++/* Register Debugging Structure */
++/*--------------------------------------------------------------------------*/
++
++typedef struct {
++ u32 msdc:1;
++ u32 ckpwn:1;
++ u32 rst:1;
++ u32 pio:1;
++ u32 ckdrven:1;
++ u32 start18v:1;
++ u32 pass18v:1;
++ u32 ckstb:1;
++ u32 ckdiv:8;
++ u32 ckmod:2;
++ u32 pad:14;
++} msdc_cfg_reg;
++typedef struct {
++ u32 sdr104cksel:1;
++ u32 rsmpl:1;
++ u32 dsmpl:1;
++ u32 ddlysel:1;
++ u32 ddr50ckd:1;
++ u32 dsplsel:1;
++ u32 pad1:10;
++ u32 d0spl:1;
++ u32 d1spl:1;
++ u32 d2spl:1;
++ u32 d3spl:1;
++ u32 d4spl:1;
++ u32 d5spl:1;
++ u32 d6spl:1;
++ u32 d7spl:1;
++ u32 riscsz:1;
++ u32 pad2:7;
++} msdc_iocon_reg;
++typedef struct {
++ u32 cden:1;
++ u32 cdsts:1;
++ u32 pad1:10;
++ u32 cddebounce:4;
++ u32 dat:8;
++ u32 cmd:1;
++ u32 pad2:6;
++ u32 wp:1;
++} msdc_ps_reg;
++typedef struct {
++ u32 mmcirq:1;
++ u32 cdsc:1;
++ u32 pad1:1;
++ u32 atocmdrdy:1;
++ u32 atocmdtmo:1;
++ u32 atocmdcrc:1;
++ u32 dmaqempty:1;
++ u32 sdioirq:1;
++ u32 cmdrdy:1;
++ u32 cmdtmo:1;
++ u32 rspcrc:1;
++ u32 csta:1;
++ u32 xfercomp:1;
++ u32 dxferdone:1;
++ u32 dattmo:1;
++ u32 datcrc:1;
++ u32 atocmd19done:1;
++ u32 pad2:15;
++} msdc_int_reg;
++typedef struct {
++ u32 mmcirq:1;
++ u32 cdsc:1;
++ u32 pad1:1;
++ u32 atocmdrdy:1;
++ u32 atocmdtmo:1;
++ u32 atocmdcrc:1;
++ u32 dmaqempty:1;
++ u32 sdioirq:1;
++ u32 cmdrdy:1;
++ u32 cmdtmo:1;
++ u32 rspcrc:1;
++ u32 csta:1;
++ u32 xfercomp:1;
++ u32 dxferdone:1;
++ u32 dattmo:1;
++ u32 datcrc:1;
++ u32 atocmd19done:1;
++ u32 pad2:15;
++} msdc_inten_reg;
++typedef struct {
++ u32 rxcnt:8;
++ u32 pad1:8;
++ u32 txcnt:8;
++ u32 pad2:7;
++ u32 clr:1;
++} msdc_fifocs_reg;
++typedef struct {
++ u32 val;
++} msdc_txdat_reg;
++typedef struct {
++ u32 val;
++} msdc_rxdat_reg;
++typedef struct {
++ u32 sdiowkup:1;
++ u32 inswkup:1;
++ u32 pad1:14;
++ u32 buswidth:2;
++ u32 pad2:1;
++ u32 sdio:1;
++ u32 sdioide:1;
++ u32 intblkgap:1;
++ u32 pad4:2;
++ u32 dtoc:8;
++} sdc_cfg_reg;
++typedef struct {
++ u32 cmd:6;
++ u32 brk:1;
++ u32 rsptyp:3;
++ u32 pad1:1;
++ u32 dtype:2;
++ u32 rw:1;
++ u32 stop:1;
++ u32 goirq:1;
++ u32 blklen:12;
++ u32 atocmd:2;
++ u32 volswth:1;
++ u32 pad2:1;
++} sdc_cmd_reg;
++typedef struct {
++ u32 arg;
++} sdc_arg_reg;
++typedef struct {
++ u32 sdcbusy:1;
++ u32 cmdbusy:1;
++ u32 pad:29;
++ u32 swrcmpl:1;
++} sdc_sts_reg;
++typedef struct {
++ u32 val;
++} sdc_resp0_reg;
++typedef struct {
++ u32 val;
++} sdc_resp1_reg;
++typedef struct {
++ u32 val;
++} sdc_resp2_reg;
++typedef struct {
++ u32 val;
++} sdc_resp3_reg;
++typedef struct {
++ u32 num;
++} sdc_blknum_reg;
++typedef struct {
++ u32 sts;
++} sdc_csts_reg;
++typedef struct {
++ u32 sts;
++} sdc_cstsen_reg;
++typedef struct {
++ u32 datcrcsts:8;
++ u32 ddrcrcsts:4;
++ u32 pad:20;
++} sdc_datcrcsts_reg;
++typedef struct {
++ u32 bootstart:1;
++ u32 bootstop:1;
++ u32 bootmode:1;
++ u32 pad1:9;
++ u32 bootwaidly:3;
++ u32 bootsupp:1;
++ u32 pad2:16;
++} emmc_cfg0_reg;
++typedef struct {
++ u32 bootcrctmc:16;
++ u32 pad:4;
++ u32 bootacktmc:12;
++} emmc_cfg1_reg;
++typedef struct {
++ u32 bootcrcerr:1;
++ u32 bootackerr:1;
++ u32 bootdattmo:1;
++ u32 bootacktmo:1;
++ u32 bootupstate:1;
++ u32 bootackrcv:1;
++ u32 bootdatrcv:1;
++ u32 pad:25;
++} emmc_sts_reg;
++typedef struct {
++ u32 bootrst:1;
++ u32 pad:31;
++} emmc_iocon_reg;
++typedef struct {
++ u32 val;
++} msdc_acmd_resp_reg;
++typedef struct {
++ u32 tunesel:4;
++ u32 pad:28;
++} msdc_acmd19_trg_reg;
++typedef struct {
++ u32 val;
++} msdc_acmd19_sts_reg;
++typedef struct {
++ u32 addr;
++} msdc_dma_sa_reg;
++typedef struct {
++ u32 addr;
++} msdc_dma_ca_reg;
++typedef struct {
++ u32 start:1;
++ u32 stop:1;
++ u32 resume:1;
++ u32 pad1:5;
++ u32 mode:1;
++ u32 pad2:1;
++ u32 lastbuf:1;
++ u32 pad3:1;
++ u32 brustsz:3;
++ u32 pad4:1;
++ u32 xfersz:16;
++} msdc_dma_ctrl_reg;
++typedef struct {
++ u32 status:1;
++ u32 decsen:1;
++ u32 pad1:2;
++ u32 bdcsen:1;
++ u32 gpdcsen:1;
++ u32 pad2:26;
++} msdc_dma_cfg_reg;
++typedef struct {
++ u32 sel:16;
++ u32 pad2:16;
++} msdc_dbg_sel_reg;
++typedef struct {
++ u32 val;
++} msdc_dbg_out_reg;
++typedef struct {
++ u32 clkdrvn:3;
++ u32 rsv0:1;
++ u32 clkdrvp:3;
++ u32 rsv1:1;
++ u32 clksr:1;
++ u32 rsv2:7;
++ u32 clkpd:1;
++ u32 clkpu:1;
++ u32 clksmt:1;
++ u32 clkies:1;
++ u32 clktdsel:4;
++ u32 clkrdsel:8;
++} msdc_pad_ctl0_reg;
++typedef struct {
++ u32 cmddrvn:3;
++ u32 rsv0:1;
++ u32 cmddrvp:3;
++ u32 rsv1:1;
++ u32 cmdsr:1;
++ u32 rsv2:7;
++ u32 cmdpd:1;
++ u32 cmdpu:1;
++ u32 cmdsmt:1;
++ u32 cmdies:1;
++ u32 cmdtdsel:4;
++ u32 cmdrdsel:8;
++} msdc_pad_ctl1_reg;
++typedef struct {
++ u32 datdrvn:3;
++ u32 rsv0:1;
++ u32 datdrvp:3;
++ u32 rsv1:1;
++ u32 datsr:1;
++ u32 rsv2:7;
++ u32 datpd:1;
++ u32 datpu:1;
++ u32 datsmt:1;
++ u32 daties:1;
++ u32 dattdsel:4;
++ u32 datrdsel:8;
++} msdc_pad_ctl2_reg;
++typedef struct {
++ u32 wrrxdly:3;
++ u32 pad1:5;
++ u32 rdrxdly:8;
++ u32 pad2:16;
++} msdc_pad_tune_reg;
++typedef struct {
++ u32 dat0:5;
++ u32 rsv0:3;
++ u32 dat1:5;
++ u32 rsv1:3;
++ u32 dat2:5;
++ u32 rsv2:3;
++ u32 dat3:5;
++ u32 rsv3:3;
++} msdc_dat_rddly0;
++typedef struct {
++ u32 dat4:5;
++ u32 rsv4:3;
++ u32 dat5:5;
++ u32 rsv5:3;
++ u32 dat6:5;
++ u32 rsv6:3;
++ u32 dat7:5;
++ u32 rsv7:3;
++} msdc_dat_rddly1;
++typedef struct {
++ u32 dbg0sel:8;
++ u32 dbg1sel:6;
++ u32 pad1:2;
++ u32 dbg2sel:6;
++ u32 pad2:2;
++ u32 dbg3sel:6;
++ u32 pad3:2;
++} msdc_hw_dbg_reg;
++typedef struct {
++ u32 val;
++} msdc_version_reg;
++typedef struct {
++ u32 val;
++} msdc_eco_ver_reg;
++
++struct msdc_regs {
++ msdc_cfg_reg msdc_cfg; /* base+0x00h */
++ msdc_iocon_reg msdc_iocon; /* base+0x04h */
++ msdc_ps_reg msdc_ps; /* base+0x08h */
++ msdc_int_reg msdc_int; /* base+0x0ch */
++ msdc_inten_reg msdc_inten; /* base+0x10h */
++ msdc_fifocs_reg msdc_fifocs; /* base+0x14h */
++ msdc_txdat_reg msdc_txdat; /* base+0x18h */
++ msdc_rxdat_reg msdc_rxdat; /* base+0x1ch */
++ u32 rsv1[4];
++ sdc_cfg_reg sdc_cfg; /* base+0x30h */
++ sdc_cmd_reg sdc_cmd; /* base+0x34h */
++ sdc_arg_reg sdc_arg; /* base+0x38h */
++ sdc_sts_reg sdc_sts; /* base+0x3ch */
++ sdc_resp0_reg sdc_resp0; /* base+0x40h */
++ sdc_resp1_reg sdc_resp1; /* base+0x44h */
++ sdc_resp2_reg sdc_resp2; /* base+0x48h */
++ sdc_resp3_reg sdc_resp3; /* base+0x4ch */
++ sdc_blknum_reg sdc_blknum; /* base+0x50h */
++ u32 rsv2[1];
++ sdc_csts_reg sdc_csts; /* base+0x58h */
++ sdc_cstsen_reg sdc_cstsen; /* base+0x5ch */
++ sdc_datcrcsts_reg sdc_dcrcsta; /* base+0x60h */
++ u32 rsv3[3];
++ emmc_cfg0_reg emmc_cfg0; /* base+0x70h */
++ emmc_cfg1_reg emmc_cfg1; /* base+0x74h */
++ emmc_sts_reg emmc_sts; /* base+0x78h */
++ emmc_iocon_reg emmc_iocon; /* base+0x7ch */
++ msdc_acmd_resp_reg acmd_resp; /* base+0x80h */
++ msdc_acmd19_trg_reg acmd19_trg; /* base+0x84h */
++ msdc_acmd19_sts_reg acmd19_sts; /* base+0x88h */
++ u32 rsv4[1];
++ msdc_dma_sa_reg dma_sa; /* base+0x90h */
++ msdc_dma_ca_reg dma_ca; /* base+0x94h */
++ msdc_dma_ctrl_reg dma_ctrl; /* base+0x98h */
++ msdc_dma_cfg_reg dma_cfg; /* base+0x9ch */
++ msdc_dbg_sel_reg dbg_sel; /* base+0xa0h */
++ msdc_dbg_out_reg dbg_out; /* base+0xa4h */
++ u32 rsv5[2];
++ u32 patch0; /* base+0xb0h */
++ u32 patch1; /* base+0xb4h */
++ u32 rsv6[10];
++ msdc_pad_ctl0_reg pad_ctl0; /* base+0xe0h */
++ msdc_pad_ctl1_reg pad_ctl1; /* base+0xe4h */
++ msdc_pad_ctl2_reg pad_ctl2; /* base+0xe8h */
++ msdc_pad_tune_reg pad_tune; /* base+0xech */
++ msdc_dat_rddly0 dat_rddly0; /* base+0xf0h */
++ msdc_dat_rddly1 dat_rddly1; /* base+0xf4h */
++ msdc_hw_dbg_reg hw_dbg; /* base+0xf8h */
++ u32 rsv7[1];
++ msdc_version_reg version; /* base+0x100h */
++ msdc_eco_ver_reg eco_ver; /* base+0x104h */
++};
++
++struct scatterlist_ex {
++ u32 cmd;
++ u32 arg;
++ u32 sglen;
++ struct scatterlist *sg;
++};
++
++#define DMA_FLAG_NONE (0x00000000)
++#define DMA_FLAG_EN_CHKSUM (0x00000001)
++#define DMA_FLAG_PAD_BLOCK (0x00000002)
++#define DMA_FLAG_PAD_DWORD (0x00000004)
++
++struct msdc_dma {
++ u32 flags; /* flags */
++ u32 xfersz; /* xfer size in bytes */
++ u32 sglen; /* size of scatter list */
++ u32 blklen; /* block size */
++ struct scatterlist *sg; /* I/O scatter list */
++ struct scatterlist_ex *esg; /* extended I/O scatter list */
++ u8 mode; /* dma mode */
++ u8 burstsz; /* burst size */
++ u8 intr; /* dma done interrupt */
++ u8 padding; /* padding */
++ u32 cmd; /* enhanced mode command */
++ u32 arg; /* enhanced mode arg */
++ u32 rsp; /* enhanced mode command response */
++ u32 autorsp; /* auto command response */
++
++ gpd_t *gpd; /* pointer to gpd array */
++ bd_t *bd; /* pointer to bd array */
++ dma_addr_t gpd_addr; /* the physical address of gpd array */
++ dma_addr_t bd_addr; /* the physical address of bd array */
++ u32 used_gpd; /* the number of used gpd elements */
++ u32 used_bd; /* the number of used bd elements */
++};
++
++struct msdc_host
++{
++ struct msdc_hw *hw;
++
++ struct mmc_host *mmc; /* mmc structure */
++ struct mmc_command *cmd;
++ struct mmc_data *data;
++ struct mmc_request *mrq;
++ int cmd_rsp;
++ int cmd_rsp_done;
++ int cmd_r1b_done;
++
++ int error;
++ spinlock_t lock; /* mutex */
++ struct semaphore sem;
++
++ u32 blksz; /* host block size */
++ u32 base; /* host base address */
++ int id; /* host id */
++ int pwr_ref; /* core power reference count */
++
++ u32 xfer_size; /* total transferred size */
++
++ struct msdc_dma dma; /* dma channel */
++ u32 dma_addr; /* dma transfer address */
++ u32 dma_left_size; /* dma transfer left size */
++ u32 dma_xfer_size; /* dma transfer size in bytes */
++ int dma_xfer; /* dma transfer mode */
++
++ u32 timeout_ns; /* data timeout ns */
++ u32 timeout_clks; /* data timeout clks */
++
++ atomic_t abort; /* abort transfer */
++
++ int irq; /* host interrupt */
++
++ struct tasklet_struct card_tasklet;
++
++ struct completion cmd_done;
++ struct completion xfer_done;
++ struct pm_message pm_state;
++
++ u32 mclk; /* mmc subsystem clock */
++ u32 hclk; /* host clock speed */
++ u32 sclk; /* SD/MS clock speed */
++ u8 core_clkon; /* Host core clock on ? */
++ u8 card_clkon; /* Card clock on ? */
++ u8 core_power; /* core power */
++ u8 power_mode; /* host power mode */
++ u8 card_inserted; /* card inserted ? */
++ u8 suspend; /* host suspended ? */
++ u8 reserved;
++ u8 app_cmd; /* for app command */
++ u32 app_cmd_arg;
++ u64 starttime;
++};
++
++static inline unsigned int uffs(unsigned int x)
++{
++ unsigned int r = 1;
++
++ if (!x)
++ return 0;
++ if (!(x & 0xffff)) {
++ x >>= 16;
++ r += 16;
++ }
++ if (!(x & 0xff)) {
++ x >>= 8;
++ r += 8;
++ }
++ if (!(x & 0xf)) {
++ x >>= 4;
++ r += 4;
++ }
++ if (!(x & 3)) {
++ x >>= 2;
++ r += 2;
++ }
++ if (!(x & 1)) {
++ x >>= 1;
++ r += 1;
++ }
++ return r;
++}
++#define sdr_read8(reg) __raw_readb(reg)
++#define sdr_read16(reg) __raw_readw(reg)
++#define sdr_read32(reg) __raw_readl(reg)
++#define sdr_write8(reg,val) __raw_writeb(val,reg)
++#define sdr_write16(reg,val) __raw_writew(val,reg)
++#define sdr_write32(reg,val) __raw_writel(val,reg)
++
++#define sdr_set_bits(reg,bs) ((*(volatile u32*)(reg)) |= (u32)(bs))
++#define sdr_clr_bits(reg,bs) ((*(volatile u32*)(reg)) &= ~((u32)(bs)))
++
++#define sdr_set_field(reg,field,val) \
++ do { \
++ volatile unsigned int tv = sdr_read32(reg); \
++ tv &= ~(field); \
++ tv |= ((val) << (uffs((unsigned int)field) - 1)); \
++ sdr_write32(reg,tv); \
++ } while(0)
++#define sdr_get_field(reg,field,val) \
++ do { \
++ volatile unsigned int tv = sdr_read32(reg); \
++ val = ((tv & (field)) >> (uffs((unsigned int)field) - 1)); \
++ } while(0)
++
++#endif
++
+diff --git a/drivers/mmc/host/sdhci-mt7620.c b/drivers/mmc/host/sdhci-mt7620.c
+new file mode 100644
+index 0000000..a3cb5e4
+--- /dev/null
++++ b/drivers/mmc/host/sdhci-mt7620.c
+@@ -0,0 +1,2314 @@
++/* Copyright Statement:
++ *
++ * This software/firmware and related documentation ("MediaTek Software") are
++ * protected under relevant copyright laws. The information contained herein
++ * is confidential and proprietary to MediaTek Inc. and/or its licensors.
++ * Without the prior written permission of MediaTek inc. and/or its licensors,
++ * any reproduction, modification, use or disclosure of MediaTek Software,
++ * and information contained herein, in whole or in part, shall be strictly prohibited.
++ *
++ * MediaTek Inc. (C) 2010. All rights reserved.
++ *
++ * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
++ * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
++ * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON
++ * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
++ * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
++ * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
++ * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH
++ * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES
++ * THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES
++ * CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK
++ * SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
++ * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND
++ * CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
++ * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
++ * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO
++ * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
++ *
++ * The following software/firmware and/or related documentation ("MediaTek Software")
++ * have been modified by MediaTek Inc. All revisions are subject to any receiver's
++ * applicable license agreements with MediaTek Inc.
++ */
++
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++#include <linux/spinlock.h>
++#include <linux/timer.h>
++#include <linux/ioport.h>
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include <linux/of_platform.h>
++#include <linux/interrupt.h>
++#include <linux/delay.h>
++#include <linux/blkdev.h>
++#include <linux/slab.h>
++#include <linux/mmc/host.h>
++#include <linux/mmc/card.h>
++#include <linux/mmc/core.h>
++#include <linux/mmc/mmc.h>
++#include <linux/mmc/sd.h>
++#include <linux/mmc/sdio.h>
++#include <linux/dma-mapping.h>
++
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <linux/version.h>
++#include <linux/pm.h>
++
++#define MSDC_SMPL_FALLING (1)
++#define MSDC_CD_PIN_EN (1 << 0) /* card detection pin is wired */
++#define MSDC_WP_PIN_EN (1 << 1) /* write protection pin is wired */
++#define MSDC_REMOVABLE (1 << 5) /* removable slot */
++#define MSDC_SYS_SUSPEND (1 << 6) /* suspended by system */
++#define MSDC_HIGHSPEED (1 << 7)
++
++#define IRQ_SDC 22
++
++#include <asm/dma.h>
++
++#include "mt6575_sd.h"
++
++#define DRV_NAME "mtk-sd"
++
++#define HOST_MAX_NUM (1) /* +/- by chhung */
++
++#define HOST_MAX_MCLK (48000000) /* +/- by chhung */
++#define HOST_MIN_MCLK (260000)
++
++#define HOST_MAX_BLKSZ (2048)
++
++#define MSDC_OCR_AVAIL (MMC_VDD_28_29 | MMC_VDD_29_30 | MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33)
++
++#define GPIO_PULL_DOWN (0)
++#define GPIO_PULL_UP (1)
++
++#define DEFAULT_DEBOUNCE (8) /* 8 cycles */
++#define DEFAULT_DTOC (40) /* data timeout counter. 65536x40 sclk. */
++
++#define CMD_TIMEOUT (HZ/10) /* 100ms */
++#define DAT_TIMEOUT (HZ/2 * 5) /* 500ms x5 */
++
++#define MAX_DMA_CNT (64 * 1024 - 512) /* a single transaction for WIFI may be 50K*/
++
++#define MAX_GPD_NUM (1 + 1) /* one null gpd */
++#define MAX_BD_NUM (1024)
++#define MAX_BD_PER_GPD (MAX_BD_NUM)
++
++#define MAX_HW_SGMTS (MAX_BD_NUM)
++#define MAX_PHY_SGMTS (MAX_BD_NUM)
++#define MAX_SGMT_SZ (MAX_DMA_CNT)
++#define MAX_REQ_SZ (MAX_SGMT_SZ * 8)
++
++#ifdef MT6575_SD_DEBUG
++static struct msdc_regs *msdc_reg[HOST_MAX_NUM];
++#endif
++
++//=================================
++#define PERI_MSDC0_PDN (15)
++//#define PERI_MSDC1_PDN (16)
++//#define PERI_MSDC2_PDN (17)
++//#define PERI_MSDC3_PDN (18)
++
++struct msdc_host *msdc_6575_host[] = {NULL,NULL,NULL,NULL};
++
++struct msdc_hw msdc0_hw = {
++ .clk_src = 0,
++ .cmd_edge = MSDC_SMPL_FALLING,
++ .data_edge = MSDC_SMPL_FALLING,
++ .clk_drv = 4,
++ .cmd_drv = 4,
++ .dat_drv = 4,
++ .data_pins = 4,
++ .data_offset = 0,
++ .flags = MSDC_SYS_SUSPEND | MSDC_WP_PIN_EN | MSDC_CD_PIN_EN | MSDC_REMOVABLE | MSDC_HIGHSPEED,
++};
++
++static struct resource mtk_sd_resources[] = {
++ [0] = {
++ .start = 0xb0130000,
++ .end = 0xb0133fff,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = IRQ_SDC, /*FIXME*/
++ .end = IRQ_SDC, /*FIXME*/
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device mtk_sd_device = {
++ .name = "mtk-sd",
++ .id = 0,
++ .num_resources = ARRAY_SIZE(mtk_sd_resources),
++ .resource = mtk_sd_resources,
++};
++/* end of +++ */
++
++static int msdc_rsp[] = {
++ 0, /* RESP_NONE */
++ 1, /* RESP_R1 */
++ 2, /* RESP_R2 */
++ 3, /* RESP_R3 */
++ 4, /* RESP_R4 */
++ 1, /* RESP_R5 */
++ 1, /* RESP_R6 */
++ 1, /* RESP_R7 */
++ 7, /* RESP_R1b */
++};
++
++/* For Inhanced DMA */
++#define msdc_init_gpd_ex(gpd,extlen,cmd,arg,blknum) \
++ do { \
++ ((gpd_t*)gpd)->extlen = extlen; \
++ ((gpd_t*)gpd)->cmd = cmd; \
++ ((gpd_t*)gpd)->arg = arg; \
++ ((gpd_t*)gpd)->blknum = blknum; \
++ }while(0)
++
++#define msdc_init_bd(bd, blkpad, dwpad, dptr, dlen) \
++ do { \
++ BUG_ON(dlen > 0xFFFFUL); \
++ ((bd_t*)bd)->blkpad = blkpad; \
++ ((bd_t*)bd)->dwpad = dwpad; \
++ ((bd_t*)bd)->ptr = (void*)dptr; \
++ ((bd_t*)bd)->buflen = dlen; \
++ }while(0)
++
++#define msdc_txfifocnt() ((sdr_read32(MSDC_FIFOCS) & MSDC_FIFOCS_TXCNT) >> 16)
++#define msdc_rxfifocnt() ((sdr_read32(MSDC_FIFOCS) & MSDC_FIFOCS_RXCNT) >> 0)
++#define msdc_fifo_write32(v) sdr_write32(MSDC_TXDATA, (v))
++#define msdc_fifo_write8(v) sdr_write8(MSDC_TXDATA, (v))
++#define msdc_fifo_read32() sdr_read32(MSDC_RXDATA)
++#define msdc_fifo_read8() sdr_read8(MSDC_RXDATA)
++
++
++#define msdc_dma_on() sdr_clr_bits(MSDC_CFG, MSDC_CFG_PIO)
++#define msdc_dma_off() sdr_set_bits(MSDC_CFG, MSDC_CFG_PIO)
++
++#define msdc_retry(expr,retry,cnt) \
++ do { \
++ int backup = cnt; \
++ while (retry) { \
++ if (!(expr)) break; \
++ if (cnt-- == 0) { \
++ retry--; mdelay(1); cnt = backup; \
++ } \
++ } \
++ WARN_ON(retry == 0); \
++ } while(0)
++
++#if 0 /* +/- chhung */
++#define msdc_reset() \
++ do { \
++ int retry = 3, cnt = 1000; \
++ sdr_set_bits(MSDC_CFG, MSDC_CFG_RST); \
++ dsb(); \
++ msdc_retry(sdr_read32(MSDC_CFG) & MSDC_CFG_RST, retry, cnt); \
++ } while(0)
++#else
++#define msdc_reset() \
++ do { \
++ int retry = 3, cnt = 1000; \
++ sdr_set_bits(MSDC_CFG, MSDC_CFG_RST); \
++ msdc_retry(sdr_read32(MSDC_CFG) & MSDC_CFG_RST, retry, cnt); \
++ } while(0)
++#endif /* end of +/- */
++
++#define msdc_clr_int() \
++ do { \
++ volatile u32 val = sdr_read32(MSDC_INT); \
++ sdr_write32(MSDC_INT, val); \
++ } while(0)
++
++#define msdc_clr_fifo() \
++ do { \
++ int retry = 3, cnt = 1000; \
++ sdr_set_bits(MSDC_FIFOCS, MSDC_FIFOCS_CLR); \
++ msdc_retry(sdr_read32(MSDC_FIFOCS) & MSDC_FIFOCS_CLR, retry, cnt); \
++ } while(0)
++
++#define msdc_irq_save(val) \
++ do { \
++ val = sdr_read32(MSDC_INTEN); \
++ sdr_clr_bits(MSDC_INTEN, val); \
++ } while(0)
++
++#define msdc_irq_restore(val) \
++ do { \
++ sdr_set_bits(MSDC_INTEN, val); \
++ } while(0)
++
++/* clock source for host: global */
++static u32 hclks[] = {48000000}; /* +/- by chhung */
++
++//============================================
++// the power for msdc host controller: global
++// always keep the VMC on.
++//============================================
++#define msdc_vcore_on(host) \
++ do { \
++ printk("[+]VMC ref. count<%d>\n", ++host->pwr_ref); \
++ (void)hwPowerOn(MT65XX_POWER_LDO_VMC, VOL_3300, "SD"); \
++ } while (0)
++#define msdc_vcore_off(host) \
++ do { \
++ printk("[-]VMC ref. count<%d>\n", --host->pwr_ref); \
++ (void)hwPowerDown(MT65XX_POWER_LDO_VMC, "SD"); \
++ } while (0)
++
++//====================================
++// the vdd output for card: global
++// always keep the VMCH on.
++//====================================
++#define msdc_vdd_on(host) \
++ do { \
++ (void)hwPowerOn(MT65XX_POWER_LDO_VMCH, VOL_3300, "SD"); \
++ } while (0)
++#define msdc_vdd_off(host) \
++ do { \
++ (void)hwPowerDown(MT65XX_POWER_LDO_VMCH, "SD"); \
++ } while (0)
++
++#define sdc_is_busy() (sdr_read32(SDC_STS) & SDC_STS_SDCBUSY)
++#define sdc_is_cmd_busy() (sdr_read32(SDC_STS) & SDC_STS_CMDBUSY)
++
++#define sdc_send_cmd(cmd,arg) \
++ do { \
++ sdr_write32(SDC_ARG, (arg)); \
++ sdr_write32(SDC_CMD, (cmd)); \
++ } while(0)
++
++// can modify to read h/w register.
++//#define is_card_present(h) ((sdr_read32(MSDC_PS) & MSDC_PS_CDSTS) ? 0 : 1);
++#define is_card_present(h) (((struct msdc_host*)(h))->card_inserted)
++
++/* +++ chhung */
++#ifndef __ASSEMBLY__
++#define PHYSADDR(a) (((unsigned long)(a)) & 0x1fffffff)
++#else
++#define PHYSADDR(a) ((a) & 0x1fffffff)
++#endif
++/* end of +++ */
++static unsigned int msdc_do_command(struct msdc_host *host,
++ struct mmc_command *cmd,
++ int tune,
++ unsigned long timeout);
++
++static int msdc_tune_cmdrsp(struct msdc_host*host,struct mmc_command *cmd);
++
++#ifdef MT6575_SD_DEBUG
++static void msdc_dump_card_status(struct msdc_host *host, u32 status)
++{
++ static char *state[] = {
++ "Idle", /* 0 */
++ "Ready", /* 1 */
++ "Ident", /* 2 */
++ "Stby", /* 3 */
++ "Tran", /* 4 */
++ "Data", /* 5 */
++ "Rcv", /* 6 */
++ "Prg", /* 7 */
++ "Dis", /* 8 */
++ "Reserved", /* 9 */
++ "Reserved", /* 10 */
++ "Reserved", /* 11 */
++ "Reserved", /* 12 */
++ "Reserved", /* 13 */
++ "Reserved", /* 14 */
++ "I/O mode", /* 15 */
++ };
++ if (status & R1_OUT_OF_RANGE)
++ printk("[CARD_STATUS] Out of Range\n");
++ if (status & R1_ADDRESS_ERROR)
++ printk("[CARD_STATUS] Address Error\n");
++ if (status & R1_BLOCK_LEN_ERROR)
++ printk("[CARD_STATUS] Block Len Error\n");
++ if (status & R1_ERASE_SEQ_ERROR)
++ printk("[CARD_STATUS] Erase Seq Error\n");
++ if (status & R1_ERASE_PARAM)
++ printk("[CARD_STATUS] Erase Param\n");
++ if (status & R1_WP_VIOLATION)
++ printk("[CARD_STATUS] WP Violation\n");
++ if (status & R1_CARD_IS_LOCKED)
++ printk("[CARD_STATUS] Card is Locked\n");
++ if (status & R1_LOCK_UNLOCK_FAILED)
++ printk("[CARD_STATUS] Lock/Unlock Failed\n");
++ if (status & R1_COM_CRC_ERROR)
++ printk("[CARD_STATUS] Command CRC Error\n");
++ if (status & R1_ILLEGAL_COMMAND)
++ printk("[CARD_STATUS] Illegal Command\n");
++ if (status & R1_CARD_ECC_FAILED)
++ printk("[CARD_STATUS] Card ECC Failed\n");
++ if (status & R1_CC_ERROR)
++ printk("[CARD_STATUS] CC Error\n");
++ if (status & R1_ERROR)
++ printk("[CARD_STATUS] Error\n");
++ if (status & R1_UNDERRUN)
++ printk("[CARD_STATUS] Underrun\n");
++ if (status & R1_OVERRUN)
++ printk("[CARD_STATUS] Overrun\n");
++ if (status & R1_CID_CSD_OVERWRITE)
++ printk("[CARD_STATUS] CID/CSD Overwrite\n");
++ if (status & R1_WP_ERASE_SKIP)
++ printk("[CARD_STATUS] WP Eraser Skip\n");
++ if (status & R1_CARD_ECC_DISABLED)
++ printk("[CARD_STATUS] Card ECC Disabled\n");
++ if (status & R1_ERASE_RESET)
++ printk("[CARD_STATUS] Erase Reset\n");
++ if (status & R1_READY_FOR_DATA)
++ printk("[CARD_STATUS] Ready for Data\n");
++ if (status & R1_SWITCH_ERROR)
++ printk("[CARD_STATUS] Switch error\n");
++ if (status & R1_APP_CMD)
++ printk("[CARD_STATUS] App Command\n");
++
++ printk("[CARD_STATUS] '%s' State\n", state[R1_CURRENT_STATE(status)]);
++}
++
++static void msdc_dump_ocr_reg(struct msdc_host *host, u32 resp)
++{
++ if (resp & (1 << 7))
++ printk("[OCR] Low Voltage Range\n");
++ if (resp & (1 << 15))
++ printk("[OCR] 2.7-2.8 volt\n");
++ if (resp & (1 << 16))
++ printk("[OCR] 2.8-2.9 volt\n");
++ if (resp & (1 << 17))
++ printk("[OCR] 2.9-3.0 volt\n");
++ if (resp & (1 << 18))
++ printk("[OCR] 3.0-3.1 volt\n");
++ if (resp & (1 << 19))
++ printk("[OCR] 3.1-3.2 volt\n");
++ if (resp & (1 << 20))
++ printk("[OCR] 3.2-3.3 volt\n");
++ if (resp & (1 << 21))
++ printk("[OCR] 3.3-3.4 volt\n");
++ if (resp & (1 << 22))
++ printk("[OCR] 3.4-3.5 volt\n");
++ if (resp & (1 << 23))
++ printk("[OCR] 3.5-3.6 volt\n");
++ if (resp & (1 << 24))
++ printk("[OCR] Switching to 1.8V Accepted (S18A)\n");
++ if (resp & (1 << 30))
++ printk("[OCR] Card Capacity Status (CCS)\n");
++ if (resp & (1 << 31))
++ printk("[OCR] Card Power Up Status (Idle)\n");
++ else
++ printk("[OCR] Card Power Up Status (Busy)\n");
++}
++
++static void msdc_dump_rca_resp(struct msdc_host *host, u32 resp)
++{
++ u32 status = (((resp >> 15) & 0x1) << 23) |
++ (((resp >> 14) & 0x1) << 22) |
++ (((resp >> 13) & 0x1) << 19) |
++ (resp & 0x1fff);
++
++ printk("[RCA] 0x%.4x\n", resp >> 16);
++
++ msdc_dump_card_status(host, status);
++}
++
++static void msdc_dump_io_resp(struct msdc_host *host, u32 resp)
++{
++ u32 flags = (resp >> 8) & 0xFF;
++ char *state[] = {"DIS", "CMD", "TRN", "RFU"};
++
++ if (flags & (1 << 7))
++ printk("[IO] COM_CRC_ERR\n");
++ if (flags & (1 << 6))
++ printk("[IO] Illgal command\n");
++ if (flags & (1 << 3))
++ printk("[IO] Error\n");
++ if (flags & (1 << 2))
++ printk("[IO] RFU\n");
++ if (flags & (1 << 1))
++ printk("[IO] Function number error\n");
++ if (flags & (1 << 0))
++ printk("[IO] Out of range\n");
++
++ printk("[IO] State: %s, Data:0x%x\n", state[(resp >> 12) & 0x3], resp & 0xFF);
++}
++#endif
++
++static void msdc_set_timeout(struct msdc_host *host, u32 ns, u32 clks)
++{
++ u32 base = host->base;
++ u32 timeout, clk_ns;
++
++ host->timeout_ns = ns;
++ host->timeout_clks = clks;
++
++ clk_ns = 1000000000UL / host->sclk;
++ timeout = ns / clk_ns + clks;
++ timeout = timeout >> 16; /* in 65536 sclk cycle unit */
++ timeout = timeout > 1 ? timeout - 1 : 0;
++ timeout = timeout > 255 ? 255 : timeout;
++
++ sdr_set_field(SDC_CFG, SDC_CFG_DTOC, timeout);
++
++/* printk("Set read data timeout: %dns %dclks -> %d x 65536 cycles\n",
++ ns, clks, timeout + 1);*/
++}
++
++static void msdc_eirq_sdio(void *data)
++{
++ struct msdc_host *host = (struct msdc_host *)data;
++
++// printk("SDIO EINT\n");
++
++ mmc_signal_sdio_irq(host->mmc);
++}
++
++static void msdc_eirq_cd(void *data)
++{
++ struct msdc_host *host = (struct msdc_host *)data;
++
++// printk("CD EINT\n");
++
++ tasklet_hi_schedule(&host->card_tasklet);
++}
++
++static void msdc_tasklet_card(unsigned long arg)
++{
++ struct msdc_host *host = (struct msdc_host *)arg;
++ struct msdc_hw *hw = host->hw;
++ u32 base = host->base;
++ u32 inserted;
++ u32 status = 0;
++
++ spin_lock(&host->lock);
++
++ if (hw->get_cd_status) {
++ inserted = hw->get_cd_status();
++ } else {
++ status = sdr_read32(MSDC_PS);
++ inserted = (status & MSDC_PS_CDSTS) ? 0 : 1;
++ }
++
++ host->card_inserted = inserted;
++
++ if (!host->suspend) {
++ host->mmc->f_max = HOST_MAX_MCLK;
++ mmc_detect_change(host->mmc, msecs_to_jiffies(20));
++ }
++
++// printk("card found<%s>\n", inserted ? "inserted" : "removed");
++
++ spin_unlock(&host->lock);
++}
++
++static void msdc_set_mclk(struct msdc_host *host, int ddr, unsigned int hz)
++{
++ u32 base = host->base;
++ u32 hclk = host->hclk;
++ u32 mode, flags, div, sclk;
++
++ if (!hz) {
++// printk("set mclk to 0!!!\n");
++ msdc_reset();
++ return;
++ }
++
++ msdc_irq_save(flags);
++
++ if (ddr) {
++ mode = 0x2;
++ if (hz >= (hclk >> 2)) {
++ div = 1;
++ sclk = hclk >> 2;
++ } else {
++ div = (hclk + ((hz << 2) - 1)) / (hz << 2);
++ sclk = (hclk >> 2) / div;
++ }
++ } else if (hz >= hclk) {
++ mode = 0x1;
++ div = 0;
++ sclk = hclk;
++ } else {
++ mode = 0x0;
++ if (hz >= (hclk >> 1)) {
++ div = 0;
++ sclk = hclk >> 1;
++ } else {
++ div = (hclk + ((hz << 2) - 1)) / (hz << 2);
++ sclk = (hclk >> 2) / div;
++ }
++ }
++
++ sdr_set_field(MSDC_CFG, MSDC_CFG_CKMOD, mode);
++ sdr_set_field(MSDC_CFG, MSDC_CFG_CKDIV, div);
++
++ while (!(sdr_read32(MSDC_CFG) & MSDC_CFG_CKSTB));
++
++ host->sclk = sclk;
++ host->mclk = hz;
++ msdc_set_timeout(host, host->timeout_ns, host->timeout_clks);
++
++/* printk("!!! Set<%dKHz> Source<%dKHz> -> sclk<%dKHz>\n",
++ hz / 1000, hclk / 1000, sclk / 1000);
++*/
++ msdc_irq_restore(flags);
++}
++
++static void msdc_abort_data(struct msdc_host *host)
++{
++ u32 base = host->base;
++ struct mmc_command *stop = host->mrq->stop;
++
++// printk("Need to Abort. dma<%d>\n", host->dma_xfer);
++
++ msdc_reset();
++ msdc_clr_fifo();
++ msdc_clr_int();
++
++ if (stop) {
++// printk("stop when abort CMD<%d>\n", stop->opcode);
++ msdc_do_command(host, stop, 0, CMD_TIMEOUT);
++ }
++}
++
++static unsigned int msdc_command_start(struct msdc_host *host,
++ struct mmc_command *cmd, int tune, unsigned long timeout)
++{
++ u32 wints = MSDC_INT_CMDRDY | MSDC_INT_RSPCRCERR | MSDC_INT_CMDTMO |
++ MSDC_INT_ACMDRDY | MSDC_INT_ACMDCRCERR | MSDC_INT_ACMDTMO |
++ MSDC_INT_ACMD19_DONE;
++ u32 base = host->base;
++ u32 opcode = cmd->opcode;
++ u32 rawcmd;
++ u32 resp;
++ unsigned long tmo;
++
++ if (opcode == MMC_SEND_OP_COND || opcode == SD_APP_OP_COND)
++ resp = RESP_R3;
++ else if (opcode == MMC_SET_RELATIVE_ADDR || opcode == SD_SEND_RELATIVE_ADDR)
++ resp = (mmc_cmd_type(cmd) == MMC_CMD_BCR) ? RESP_R6 : RESP_R1;
++ else if (opcode == MMC_FAST_IO)
++ resp = RESP_R4;
++ else if (opcode == MMC_GO_IRQ_STATE)
++ resp = RESP_R5;
++ else if (opcode == MMC_SELECT_CARD)
++ resp = (cmd->arg != 0) ? RESP_R1B : RESP_NONE;
++ else if (opcode == SD_IO_RW_DIRECT || opcode == SD_IO_RW_EXTENDED)
++ resp = RESP_R1;
++ else if (opcode == SD_SEND_IF_COND && (mmc_cmd_type(cmd) == MMC_CMD_BCR))
++ resp = RESP_R1;
++ else {
++ switch (mmc_resp_type(cmd)) {
++ case MMC_RSP_R1:
++ resp = RESP_R1;
++ break;
++ case MMC_RSP_R1B:
++ resp = RESP_R1B;
++ break;
++ case MMC_RSP_R2:
++ resp = RESP_R2;
++ break;
++ case MMC_RSP_R3:
++ resp = RESP_R3;
++ break;
++ case MMC_RSP_NONE:
++ default:
++ resp = RESP_NONE;
++ break;
++ }
++ }
++
++ cmd->error = 0;
++ rawcmd = opcode | msdc_rsp[resp] << 7 | host->blksz << 16;
++
++ if (opcode == MMC_READ_MULTIPLE_BLOCK) {
++ rawcmd |= (2 << 11);
++ } else if (opcode == MMC_READ_SINGLE_BLOCK) {
++ rawcmd |= (1 << 11);
++ } else if (opcode == MMC_WRITE_MULTIPLE_BLOCK) {
++ rawcmd |= ((2 << 11) | (1 << 13));
++ } else if (opcode == MMC_WRITE_BLOCK) {
++ rawcmd |= ((1 << 11) | (1 << 13));
++ } else if (opcode == SD_IO_RW_EXTENDED) {
++ if (cmd->data->flags & MMC_DATA_WRITE)
++ rawcmd |= (1 << 13);
++ if (cmd->data->blocks > 1)
++ rawcmd |= (2 << 11);
++ else
++ rawcmd |= (1 << 11);
++ } else if (opcode == SD_IO_RW_DIRECT && cmd->flags == (unsigned int)-1) {
++ rawcmd |= (1 << 14);
++ } else if ((opcode == SD_APP_SEND_SCR) ||
++ (opcode == SD_APP_SEND_NUM_WR_BLKS) ||
++ (opcode == SD_SWITCH && (mmc_cmd_type(cmd) == MMC_CMD_ADTC)) ||
++ (opcode == SD_APP_SD_STATUS && (mmc_cmd_type(cmd) == MMC_CMD_ADTC)) ||
++ (opcode == MMC_SEND_EXT_CSD && (mmc_cmd_type(cmd) == MMC_CMD_ADTC))) {
++ rawcmd |= (1 << 11);
++ } else if (opcode == MMC_STOP_TRANSMISSION) {
++ rawcmd |= (1 << 14);
++ rawcmd &= ~(0x0FFF << 16);
++ }
++
++// printk("CMD<%d><0x%.8x> Arg<0x%.8x>\n", opcode , rawcmd, cmd->arg);
++
++ tmo = jiffies + timeout;
++
++ if (opcode == MMC_SEND_STATUS) {
++ for (;;) {
++ if (!sdc_is_cmd_busy())
++ break;
++
++ if (time_after(jiffies, tmo)) {
++ //printk("XXX cmd_busy timeout: before CMD<%d>\n", opcode);
++ cmd->error = (unsigned int)-ETIMEDOUT;
++ msdc_reset();
++ goto end;
++ }
++ }
++ } else {
++ for (;;) {
++ if (!sdc_is_busy())
++ break;
++ if (time_after(jiffies, tmo)) {
++ //printk("XXX sdc_busy timeout: before CMD<%d>\n", opcode);
++ cmd->error = (unsigned int)-ETIMEDOUT;
++ msdc_reset();
++ goto end;
++ }
++ }
++ }
++
++ //BUG_ON(in_interrupt());
++ host->cmd = cmd;
++ host->cmd_rsp = resp;
++ init_completion(&host->cmd_done);
++ sdr_set_bits(MSDC_INTEN, wints);
++ sdc_send_cmd(rawcmd, cmd->arg);
++
++end:
++ return cmd->error;
++}
++
++static unsigned int msdc_command_resp(struct msdc_host *host, struct mmc_command *cmd,
++ int tune, unsigned long timeout)
++{
++ u32 base = host->base;
++ //u32 opcode = cmd->opcode;
++ u32 resp;
++ u32 wints = MSDC_INT_CMDRDY | MSDC_INT_RSPCRCERR | MSDC_INT_CMDTMO |
++ MSDC_INT_ACMDRDY | MSDC_INT_ACMDCRCERR | MSDC_INT_ACMDTMO |
++ MSDC_INT_ACMD19_DONE;
++
++ resp = host->cmd_rsp;
++
++ BUG_ON(in_interrupt());
++ spin_unlock(&host->lock);
++ if (!wait_for_completion_timeout(&host->cmd_done, 10*timeout)) {
++ //printk("XXX CMD<%d> wait_for_completion timeout ARG<0x%.8x>\n", opcode, cmd->arg);
++ cmd->error = (unsigned int)-ETIMEDOUT;
++ msdc_reset();
++ }
++ spin_lock(&host->lock);
++
++ sdr_clr_bits(MSDC_INTEN, wints);
++ host->cmd = NULL;
++
++ if (!tune)
++ return cmd->error;
++
++ /* memory card CRC */
++ if (host->hw->flags & MSDC_REMOVABLE && cmd->error == (unsigned int)(-EIO) ) {
++ if (sdr_read32(SDC_CMD) & 0x1800) {
++ msdc_abort_data(host);
++ } else {
++ msdc_reset();
++ msdc_clr_fifo();
++ msdc_clr_int();
++ }
++ cmd->error = msdc_tune_cmdrsp(host,cmd);
++ }
++
++ return cmd->error;
++}
++
++static unsigned int msdc_do_command(struct msdc_host *host, struct mmc_command *cmd,
++ int tune, unsigned long timeout)
++{
++ if (!msdc_command_start(host, cmd, tune, timeout))
++ msdc_command_resp(host, cmd, tune, timeout);
++
++ //printk(" return<%d> resp<0x%.8x>\n", cmd->error, cmd->resp[0]);
++ return cmd->error;
++}
++
++static int msdc_pio_abort(struct msdc_host *host, struct mmc_data *data, unsigned long tmo)
++{
++ u32 base = host->base;
++ int ret = 0;
++
++ if (atomic_read(&host->abort))
++ ret = 1;
++
++ if (time_after(jiffies, tmo)) {
++ data->error = (unsigned int)-ETIMEDOUT;
++ //printk("XXX PIO Data Timeout: CMD<%d>\n", host->mrq->cmd->opcode);
++ ret = 1;
++ }
++
++ if (ret) {
++ msdc_reset();
++ msdc_clr_fifo();
++ msdc_clr_int();
++ //printk("msdc pio find abort\n");
++ }
++
++ return ret;
++}
++
++static int msdc_pio_read(struct msdc_host *host, struct mmc_data *data)
++{
++ struct scatterlist *sg = data->sg;
++ u32 base = host->base;
++ u32 num = data->sg_len;
++ u32 *ptr;
++ u8 *u8ptr;
++ u32 left;
++ u32 count, size = 0;
++ u32 wints = MSDC_INTEN_DATTMO | MSDC_INTEN_DATCRCERR;
++ unsigned long tmo = jiffies + DAT_TIMEOUT;
++
++ sdr_set_bits(MSDC_INTEN, wints);
++ while (num) {
++ left = sg_dma_len(sg);
++ ptr = sg_virt(sg);
++ while (left) {
++ if ((left >= MSDC_FIFO_THD) && (msdc_rxfifocnt() >= MSDC_FIFO_THD)) {
++ count = MSDC_FIFO_THD >> 2;
++ do {
++ *ptr++ = msdc_fifo_read32();
++ } while (--count);
++ left -= MSDC_FIFO_THD;
++ } else if ((left < MSDC_FIFO_THD) && msdc_rxfifocnt() >= left) {
++ while (left > 3) {
++ *ptr++ = msdc_fifo_read32();
++ left -= 4;
++ }
++
++ u8ptr = (u8 *)ptr;
++ while(left) {
++ * u8ptr++ = msdc_fifo_read8();
++ left--;
++ }
++ }
++
++ if (msdc_pio_abort(host, data, tmo))
++ goto end;
++ }
++ size += sg_dma_len(sg);
++ sg = sg_next(sg); num--;
++ }
++end:
++ data->bytes_xfered += size;
++ //printk(" PIO Read<%d>bytes\n", size);
++
++ sdr_clr_bits(MSDC_INTEN, wints);
++ if(data->error)
++ printk("read pio data->error<%d> left<%d> size<%d>\n", data->error, left, size);
++
++ return data->error;
++}
++
++static int msdc_pio_write(struct msdc_host* host, struct mmc_data *data)
++{
++ u32 base = host->base;
++ struct scatterlist *sg = data->sg;
++ u32 num = data->sg_len;
++ u32 *ptr;
++ u8 *u8ptr;
++ u32 left;
++ u32 count, size = 0;
++ u32 wints = MSDC_INTEN_DATTMO | MSDC_INTEN_DATCRCERR;
++ unsigned long tmo = jiffies + DAT_TIMEOUT;
++
++ sdr_set_bits(MSDC_INTEN, wints);
++ while (num) {
++ left = sg_dma_len(sg);
++ ptr = sg_virt(sg);
++
++ while (left) {
++ if (left >= MSDC_FIFO_SZ && msdc_txfifocnt() == 0) {
++ count = MSDC_FIFO_SZ >> 2;
++ do {
++ msdc_fifo_write32(*ptr); ptr++;
++ } while (--count);
++ left -= MSDC_FIFO_SZ;
++ } else if (left < MSDC_FIFO_SZ && msdc_txfifocnt() == 0) {
++ while (left > 3) {
++ msdc_fifo_write32(*ptr); ptr++;
++ left -= 4;
++ }
++
++ u8ptr = (u8*)ptr;
++ while( left) {
++ msdc_fifo_write8(*u8ptr);
++ u8ptr++;
++ left--;
++ }
++ }
++
++ if (msdc_pio_abort(host, data, tmo))
++ goto end;
++ }
++ size += sg_dma_len(sg);
++ sg = sg_next(sg); num--;
++ }
++end:
++ data->bytes_xfered += size;
++ //printk(" PIO Write<%d>bytes\n", size);
++ if(data->error)
++ printk("write pio data->error<%d>\n", data->error);
++
++ sdr_clr_bits(MSDC_INTEN, wints);
++
++ return data->error;
++}
++
++static void msdc_dma_start(struct msdc_host *host)
++{
++ u32 base = host->base;
++ u32 wints = MSDC_INTEN_XFER_COMPL | MSDC_INTEN_DATTMO | MSDC_INTEN_DATCRCERR;
++
++ sdr_set_bits(MSDC_INTEN, wints);
++ sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_START, 1);
++
++ //printk("DMA start\n");
++}
++
++static void msdc_dma_stop(struct msdc_host *host)
++{
++ u32 base = host->base;
++ u32 wints = MSDC_INTEN_XFER_COMPL | MSDC_INTEN_DATTMO | MSDC_INTEN_DATCRCERR;
++
++ //printk("DMA status: 0x%.8x\n",sdr_read32(MSDC_DMA_CFG));
++
++ sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_STOP, 1);
++ while (sdr_read32(MSDC_DMA_CFG) & MSDC_DMA_CFG_STS);
++ sdr_clr_bits(MSDC_INTEN, wints); /* Not just xfer_comp */
++
++ //printk("DMA stop\n");
++}
++
++static u8 msdc_dma_calcs(u8 *buf, u32 len)
++{
++ u32 i, sum = 0;
++
++ for (i = 0; i < len; i++)
++ sum += buf[i];
++
++ return 0xFF - (u8)sum;
++}
++
++static int msdc_dma_config(struct msdc_host *host, struct msdc_dma *dma)
++{
++ u32 base = host->base;
++ u32 sglen = dma->sglen;
++ u32 j, num, bdlen;
++ u8 blkpad, dwpad, chksum;
++ struct scatterlist *sg = dma->sg;
++ gpd_t *gpd;
++ bd_t *bd;
++
++ switch (dma->mode) {
++ case MSDC_MODE_DMA_BASIC:
++ BUG_ON(dma->xfersz > 65535);
++ BUG_ON(dma->sglen != 1);
++ sdr_write32(MSDC_DMA_SA, PHYSADDR(sg_dma_address(sg)));
++ sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_LASTBUF, 1);
++ sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_XFERSZ, sg_dma_len(sg));
++ sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_BRUSTSZ, dma->burstsz);
++ sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_MODE, 0);
++ break;
++
++ case MSDC_MODE_DMA_DESC:
++ blkpad = (dma->flags & DMA_FLAG_PAD_BLOCK) ? 1 : 0;
++ dwpad = (dma->flags & DMA_FLAG_PAD_DWORD) ? 1 : 0;
++ chksum = (dma->flags & DMA_FLAG_EN_CHKSUM) ? 1 : 0;
++
++ num = (sglen + MAX_BD_PER_GPD - 1) / MAX_BD_PER_GPD;
++ BUG_ON(num !=1 );
++
++ gpd = dma->gpd;
++ bd = dma->bd;
++ bdlen = sglen;
++
++ gpd->hwo = 1; /* hw will clear it */
++ gpd->bdp = 1;
++ gpd->chksum = 0; /* need to clear first. */
++ gpd->chksum = (chksum ? msdc_dma_calcs((u8 *)gpd, 16) : 0);
++
++ for (j = 0; j < bdlen; j++) {
++ msdc_init_bd(&bd[j], blkpad, dwpad, sg_dma_address(sg), sg_dma_len(sg));
++ if( j == bdlen - 1)
++ bd[j].eol = 1;
++ else
++ bd[j].eol = 0;
++ bd[j].chksum = 0; /* checksume need to clear first */
++ bd[j].chksum = (chksum ? msdc_dma_calcs((u8 *)(&bd[j]), 16) : 0);
++ sg++;
++ }
++
++ dma->used_gpd += 2;
++ dma->used_bd += bdlen;
++
++ sdr_set_field(MSDC_DMA_CFG, MSDC_DMA_CFG_DECSEN, chksum);
++ sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_BRUSTSZ, dma->burstsz);
++ sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_MODE, 1);
++ sdr_write32(MSDC_DMA_SA, PHYSADDR((u32)dma->gpd_addr));
++ break;
++ }
++
++// printk("DMA_CTRL = 0x%x\n", sdr_read32(MSDC_DMA_CTRL));
++// printk("DMA_CFG = 0x%x\n", sdr_read32(MSDC_DMA_CFG));
++// printk("DMA_SA = 0x%x\n", sdr_read32(MSDC_DMA_SA));
++
++ return 0;
++}
++
++static void msdc_dma_setup(struct msdc_host *host, struct msdc_dma *dma,
++ struct scatterlist *sg, unsigned int sglen)
++{
++ BUG_ON(sglen > MAX_BD_NUM);
++
++ dma->sg = sg;
++ dma->flags = DMA_FLAG_EN_CHKSUM;
++ dma->sglen = sglen;
++ dma->xfersz = host->xfer_size;
++ dma->burstsz = MSDC_BRUST_64B;
++
++ if (sglen == 1 && sg_dma_len(sg) <= MAX_DMA_CNT)
++ dma->mode = MSDC_MODE_DMA_BASIC;
++ else
++ dma->mode = MSDC_MODE_DMA_DESC;
++
++// printk("DMA mode<%d> sglen<%d> xfersz<%d>\n", dma->mode, dma->sglen, dma->xfersz);
++
++ msdc_dma_config(host, dma);
++}
++
++static void msdc_set_blknum(struct msdc_host *host, u32 blknum)
++{
++ u32 base = host->base;
++
++ sdr_write32(SDC_BLK_NUM, blknum);
++}
++
++static int msdc_do_request(struct mmc_host*mmc, struct mmc_request*mrq)
++{
++ struct msdc_host *host = mmc_priv(mmc);
++ struct mmc_command *cmd;
++ struct mmc_data *data;
++ u32 base = host->base;
++ unsigned int left=0;
++ int dma = 0, read = 1, dir = DMA_FROM_DEVICE, send_type=0;
++
++#define SND_DAT 0
++#define SND_CMD 1
++
++ BUG_ON(mmc == NULL);
++ BUG_ON(mrq == NULL);
++
++ host->error = 0;
++ atomic_set(&host->abort, 0);
++
++ cmd = mrq->cmd;
++ data = mrq->cmd->data;
++
++ if (!data) {
++ send_type = SND_CMD;
++ if (msdc_do_command(host, cmd, 1, CMD_TIMEOUT) != 0)
++ goto done;
++ } else {
++ BUG_ON(data->blksz > HOST_MAX_BLKSZ);
++ send_type=SND_DAT;
++
++ data->error = 0;
++ read = data->flags & MMC_DATA_READ ? 1 : 0;
++ host->data = data;
++ host->xfer_size = data->blocks * data->blksz;
++ host->blksz = data->blksz;
++
++ host->dma_xfer = dma = ((host->xfer_size >= 512) ? 1 : 0);
++
++ if (read)
++ if ((host->timeout_ns != data->timeout_ns) ||
++ (host->timeout_clks != data->timeout_clks))
++ msdc_set_timeout(host, data->timeout_ns, data->timeout_clks);
++
++ msdc_set_blknum(host, data->blocks);
++
++ if (dma) {
++ msdc_dma_on();
++ init_completion(&host->xfer_done);
++
++ if (msdc_command_start(host, cmd, 1, CMD_TIMEOUT) != 0)
++ goto done;
++
++ dir = read ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
++ dma_map_sg(mmc_dev(mmc), data->sg, data->sg_len, dir);
++ msdc_dma_setup(host, &host->dma, data->sg, data->sg_len);
++
++ if (msdc_command_resp(host, cmd, 1, CMD_TIMEOUT) != 0)
++ goto done;
++
++ msdc_dma_start(host);
++
++ spin_unlock(&host->lock);
++ if (!wait_for_completion_timeout(&host->xfer_done, DAT_TIMEOUT)) {
++ /*printk("XXX CMD<%d> wait xfer_done<%d> timeout!!\n", cmd->opcode, data->blocks * data->blksz);
++ printk(" DMA_SA = 0x%x\n", sdr_read32(MSDC_DMA_SA));
++ printk(" DMA_CA = 0x%x\n", sdr_read32(MSDC_DMA_CA));
++ printk(" DMA_CTRL = 0x%x\n", sdr_read32(MSDC_DMA_CTRL));
++ printk(" DMA_CFG = 0x%x\n", sdr_read32(MSDC_DMA_CFG));*/
++ data->error = (unsigned int)-ETIMEDOUT;
++
++ msdc_reset();
++ msdc_clr_fifo();
++ msdc_clr_int();
++ }
++ spin_lock(&host->lock);
++ msdc_dma_stop(host);
++ } else {
++ if (msdc_do_command(host, cmd, 1, CMD_TIMEOUT) != 0)
++ goto done;
++
++ if (read) {
++ if (msdc_pio_read(host, data))
++ goto done;
++ } else {
++ if (msdc_pio_write(host, data))
++ goto done;
++ }
++
++ if (!read) {
++ while (1) {
++ left = msdc_txfifocnt();
++ if (left == 0) {
++ break;
++ }
++ if (msdc_pio_abort(host, data, jiffies + DAT_TIMEOUT)) {
++ break;
++ /* Fix me: what about if data error, when stop ? how to? */
++ }
++ }
++ } else {
++ /* Fix me: read case: need to check CRC error */
++ }
++
++ /* For write case: SDCBUSY and Xfer_Comp will assert when DAT0 not busy.
++ For read case : SDCBUSY and Xfer_Comp will assert when last byte read out from FIFO.
++ */
++
++ /* try not to wait xfer_comp interrupt.
++ the next command will check SDC_BUSY.
++ SDC_BUSY means xfer_comp assert
++ */
++
++ } // PIO mode
++
++ /* Last: stop transfer */
++ if (data->stop){
++ if (msdc_do_command(host, data->stop, 0, CMD_TIMEOUT) != 0) {
++ goto done;
++ }
++ }
++ }
++
++done:
++ if (data != NULL) {
++ host->data = NULL;
++ host->dma_xfer = 0;
++ if (dma != 0) {
++ msdc_dma_off();
++ host->dma.used_bd = 0;
++ host->dma.used_gpd = 0;
++ dma_unmap_sg(mmc_dev(mmc), data->sg, data->sg_len, dir);
++ }
++ host->blksz = 0;
++
++ // printk("CMD<%d> data<%s %s> blksz<%d> block<%d> error<%d>",cmd->opcode, (dma? "dma":"pio\n"),
++ // (read ? "read ":"write") ,data->blksz, data->blocks, data->error);
++ }
++
++ if (mrq->cmd->error) host->error = 0x001;
++ if (mrq->data && mrq->data->error) host->error |= 0x010;
++ if (mrq->stop && mrq->stop->error) host->error |= 0x100;
++
++ //if (host->error) printk("host->error<%d>\n", host->error);
++
++ return host->error;
++}
++
++static int msdc_app_cmd(struct mmc_host *mmc, struct msdc_host *host)
++{
++ struct mmc_command cmd;
++ struct mmc_request mrq;
++ u32 err;
++
++ memset(&cmd, 0, sizeof(struct mmc_command));
++ cmd.opcode = MMC_APP_CMD;
++#if 0 /* bug: we meet mmc->card is null when ACMD6 */
++ cmd.arg = mmc->card->rca << 16;
++#else
++ cmd.arg = host->app_cmd_arg;
++#endif
++ cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
++
++ memset(&mrq, 0, sizeof(struct mmc_request));
++ mrq.cmd = &cmd; cmd.mrq = &mrq;
++ cmd.data = NULL;
++
++ err = msdc_do_command(host, &cmd, 0, CMD_TIMEOUT);
++ return err;
++}
++
++static int msdc_tune_cmdrsp(struct msdc_host*host, struct mmc_command *cmd)
++{
++ int result = -1;
++ u32 base = host->base;
++ u32 rsmpl, cur_rsmpl, orig_rsmpl;
++ u32 rrdly, cur_rrdly = 0, orig_rrdly;
++ u32 skip = 1;
++
++ /* ==== don't support 3.0 now ====
++ 1: R_SMPL[1]
++ 2: PAD_CMD_RESP_RXDLY[26:22]
++ ==========================*/
++
++ // save the previous tune result
++ sdr_get_field(MSDC_IOCON, MSDC_IOCON_RSPL, orig_rsmpl);
++ sdr_get_field(MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRRDLY, orig_rrdly);
++
++ rrdly = 0;
++ do {
++ for (rsmpl = 0; rsmpl < 2; rsmpl++) {
++ /* Lv1: R_SMPL[1] */
++ cur_rsmpl = (orig_rsmpl + rsmpl) % 2;
++ if (skip == 1) {
++ skip = 0;
++ continue;
++ }
++ sdr_set_field(MSDC_IOCON, MSDC_IOCON_RSPL, cur_rsmpl);
++
++ if (host->app_cmd) {
++ result = msdc_app_cmd(host->mmc, host);
++ if (result) {
++ //printk("TUNE_CMD app_cmd<%d> failed: RESP_RXDLY<%d>,R_SMPL<%d>\n",
++ // host->mrq->cmd->opcode, cur_rrdly, cur_rsmpl);
++ continue;
++ }
++ }
++ result = msdc_do_command(host, cmd, 0, CMD_TIMEOUT); // not tune.
++ //printk("TUNE_CMD<%d> %s PAD_CMD_RESP_RXDLY[26:22]<%d> R_SMPL[1]<%d>\n", cmd->opcode,
++// (result == 0) ? "PASS" : "FAIL", cur_rrdly, cur_rsmpl);
++
++ if (result == 0) {
++ return 0;
++ }
++ if (result != (unsigned int)(-EIO)) {
++ // printk("TUNE_CMD<%d> Error<%d> not -EIO\n", cmd->opcode, result);
++ return result;
++ }
++
++ /* should be EIO */
++ if (sdr_read32(SDC_CMD) & 0x1800) { /* check if has data phase */
++ msdc_abort_data(host);
++ }
++ }
++
++ /* Lv2: PAD_CMD_RESP_RXDLY[26:22] */
++ cur_rrdly = (orig_rrdly + rrdly + 1) % 32;
++ sdr_set_field(MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRRDLY, cur_rrdly);
++ }while (++rrdly < 32);
++
++ return result;
++}
++
++/* Support SD2.0 Only */
++static int msdc_tune_bread(struct mmc_host *mmc, struct mmc_request *mrq)
++{
++ struct msdc_host *host = mmc_priv(mmc);
++ u32 base = host->base;
++ u32 ddr=0;
++ u32 dcrc = 0;
++ u32 rxdly, cur_rxdly0, cur_rxdly1;
++ u32 dsmpl, cur_dsmpl, orig_dsmpl;
++ u32 cur_dat0, cur_dat1, cur_dat2, cur_dat3;
++ u32 cur_dat4, cur_dat5, cur_dat6, cur_dat7;
++ u32 orig_dat0, orig_dat1, orig_dat2, orig_dat3;
++ u32 orig_dat4, orig_dat5, orig_dat6, orig_dat7;
++ int result = -1;
++ u32 skip = 1;
++
++ sdr_get_field(MSDC_IOCON, MSDC_IOCON_DSPL, orig_dsmpl);
++
++ /* Tune Method 2. */
++ sdr_set_field(MSDC_IOCON, MSDC_IOCON_DDLSEL, 1);
++
++ rxdly = 0;
++ do {
++ for (dsmpl = 0; dsmpl < 2; dsmpl++) {
++ cur_dsmpl = (orig_dsmpl + dsmpl) % 2;
++ if (skip == 1) {
++ skip = 0;
++ continue;
++ }
++ sdr_set_field(MSDC_IOCON, MSDC_IOCON_DSPL, cur_dsmpl);
++
++ if (host->app_cmd) {
++ result = msdc_app_cmd(host->mmc, host);
++ if (result) {
++ //printk("TUNE_BREAD app_cmd<%d> failed\n", host->mrq->cmd->opcode);
++ continue;
++ }
++ }
++ result = msdc_do_request(mmc,mrq);
++
++ sdr_get_field(SDC_DCRC_STS, SDC_DCRC_STS_POS|SDC_DCRC_STS_NEG, dcrc); /* RO */
++ if (!ddr) dcrc &= ~SDC_DCRC_STS_NEG;
++ //printk("TUNE_BREAD<%s> dcrc<0x%x> DATRDDLY0/1<0x%x><0x%x> dsmpl<0x%x>\n",
++ // (result == 0 && dcrc == 0) ? "PASS" : "FAIL", dcrc,
++ // sdr_read32(MSDC_DAT_RDDLY0), sdr_read32(MSDC_DAT_RDDLY1), cur_dsmpl);
++
++ /* Fix me: result is 0, but dcrc is still exist */
++ if (result == 0 && dcrc == 0) {
++ goto done;
++ } else {
++ /* there is a case: command timeout, and data phase not processed */
++ if (mrq->data->error != 0 && mrq->data->error != (unsigned int)(-EIO)) {
++ //printk("TUNE_READ: result<0x%x> cmd_error<%d> data_error<%d>\n",
++ // result, mrq->cmd->error, mrq->data->error);
++ goto done;
++ }
++ }
++ }
++
++ cur_rxdly0 = sdr_read32(MSDC_DAT_RDDLY0);
++ cur_rxdly1 = sdr_read32(MSDC_DAT_RDDLY1);
++
++ /* E1 ECO. YD: Reverse */
++ if (sdr_read32(MSDC_ECO_VER) >= 4) {
++ orig_dat0 = (cur_rxdly0 >> 24) & 0x1F;
++ orig_dat1 = (cur_rxdly0 >> 16) & 0x1F;
++ orig_dat2 = (cur_rxdly0 >> 8) & 0x1F;
++ orig_dat3 = (cur_rxdly0 >> 0) & 0x1F;
++ orig_dat4 = (cur_rxdly1 >> 24) & 0x1F;
++ orig_dat5 = (cur_rxdly1 >> 16) & 0x1F;
++ orig_dat6 = (cur_rxdly1 >> 8) & 0x1F;
++ orig_dat7 = (cur_rxdly1 >> 0) & 0x1F;
++ } else {
++ orig_dat0 = (cur_rxdly0 >> 0) & 0x1F;
++ orig_dat1 = (cur_rxdly0 >> 8) & 0x1F;
++ orig_dat2 = (cur_rxdly0 >> 16) & 0x1F;
++ orig_dat3 = (cur_rxdly0 >> 24) & 0x1F;
++ orig_dat4 = (cur_rxdly1 >> 0) & 0x1F;
++ orig_dat5 = (cur_rxdly1 >> 8) & 0x1F;
++ orig_dat6 = (cur_rxdly1 >> 16) & 0x1F;
++ orig_dat7 = (cur_rxdly1 >> 24) & 0x1F;
++ }
++
++ if (ddr) {
++ cur_dat0 = (dcrc & (1 << 0) || dcrc & (1 << 8)) ? ((orig_dat0 + 1) % 32) : orig_dat0;
++ cur_dat1 = (dcrc & (1 << 1) || dcrc & (1 << 9)) ? ((orig_dat1 + 1) % 32) : orig_dat1;
++ cur_dat2 = (dcrc & (1 << 2) || dcrc & (1 << 10)) ? ((orig_dat2 + 1) % 32) : orig_dat2;
++ cur_dat3 = (dcrc & (1 << 3) || dcrc & (1 << 11)) ? ((orig_dat3 + 1) % 32) : orig_dat3;
++ } else {
++ cur_dat0 = (dcrc & (1 << 0)) ? ((orig_dat0 + 1) % 32) : orig_dat0;
++ cur_dat1 = (dcrc & (1 << 1)) ? ((orig_dat1 + 1) % 32) : orig_dat1;
++ cur_dat2 = (dcrc & (1 << 2)) ? ((orig_dat2 + 1) % 32) : orig_dat2;
++ cur_dat3 = (dcrc & (1 << 3)) ? ((orig_dat3 + 1) % 32) : orig_dat3;
++ }
++ cur_dat4 = (dcrc & (1 << 4)) ? ((orig_dat4 + 1) % 32) : orig_dat4;
++ cur_dat5 = (dcrc & (1 << 5)) ? ((orig_dat5 + 1) % 32) : orig_dat5;
++ cur_dat6 = (dcrc & (1 << 6)) ? ((orig_dat6 + 1) % 32) : orig_dat6;
++ cur_dat7 = (dcrc & (1 << 7)) ? ((orig_dat7 + 1) % 32) : orig_dat7;
++
++ cur_rxdly0 = (cur_dat0 << 24) | (cur_dat1 << 16) | (cur_dat2 << 8) | (cur_dat3 << 0);
++ cur_rxdly1 = (cur_dat4 << 24) | (cur_dat5 << 16) | (cur_dat6 << 8) | (cur_dat7 << 0);
++
++ sdr_write32(MSDC_DAT_RDDLY0, cur_rxdly0);
++ sdr_write32(MSDC_DAT_RDDLY1, cur_rxdly1);
++
++ } while (++rxdly < 32);
++
++done:
++ return result;
++}
++
++static int msdc_tune_bwrite(struct mmc_host *mmc,struct mmc_request *mrq)
++{
++ struct msdc_host *host = mmc_priv(mmc);
++ u32 base = host->base;
++
++ u32 wrrdly, cur_wrrdly = 0, orig_wrrdly;
++ u32 dsmpl, cur_dsmpl, orig_dsmpl;
++ u32 rxdly, cur_rxdly0;
++ u32 orig_dat0, orig_dat1, orig_dat2, orig_dat3;
++ u32 cur_dat0, cur_dat1, cur_dat2, cur_dat3;
++ int result = -1;
++ u32 skip = 1;
++
++ // MSDC_IOCON_DDR50CKD need to check. [Fix me]
++
++ sdr_get_field(MSDC_PAD_TUNE, MSDC_PAD_TUNE_DATWRDLY, orig_wrrdly);
++ sdr_get_field(MSDC_IOCON, MSDC_IOCON_DSPL, orig_dsmpl );
++
++ /* Tune Method 2. just DAT0 */
++ sdr_set_field(MSDC_IOCON, MSDC_IOCON_DDLSEL, 1);
++ cur_rxdly0 = sdr_read32(MSDC_DAT_RDDLY0);
++
++ /* E1 ECO. YD: Reverse */
++ if (sdr_read32(MSDC_ECO_VER) >= 4) {
++ orig_dat0 = (cur_rxdly0 >> 24) & 0x1F;
++ orig_dat1 = (cur_rxdly0 >> 16) & 0x1F;
++ orig_dat2 = (cur_rxdly0 >> 8) & 0x1F;
++ orig_dat3 = (cur_rxdly0 >> 0) & 0x1F;
++ } else {
++ orig_dat0 = (cur_rxdly0 >> 0) & 0x1F;
++ orig_dat1 = (cur_rxdly0 >> 8) & 0x1F;
++ orig_dat2 = (cur_rxdly0 >> 16) & 0x1F;
++ orig_dat3 = (cur_rxdly0 >> 24) & 0x1F;
++ }
++
++ rxdly = 0;
++ do {
++ wrrdly = 0;
++ do {
++ for (dsmpl = 0; dsmpl < 2; dsmpl++) {
++ cur_dsmpl = (orig_dsmpl + dsmpl) % 2;
++ if (skip == 1) {
++ skip = 0;
++ continue;
++ }
++ sdr_set_field(MSDC_IOCON, MSDC_IOCON_DSPL, cur_dsmpl);
++
++ if (host->app_cmd) {
++ result = msdc_app_cmd(host->mmc, host);
++ if (result) {
++ //printk("TUNE_BWRITE app_cmd<%d> failed\n", host->mrq->cmd->opcode);
++ continue;
++ }
++ }
++ result = msdc_do_request(mmc,mrq);
++
++ //printk("TUNE_BWRITE<%s> DSPL<%d> DATWRDLY<%d> MSDC_DAT_RDDLY0<0x%x>\n",
++ // result == 0 ? "PASS" : "FAIL",
++ // cur_dsmpl, cur_wrrdly, cur_rxdly0);
++
++ if (result == 0) {
++ goto done;
++ }
++ else {
++ /* there is a case: command timeout, and data phase not processed */
++ if (mrq->data->error != (unsigned int)(-EIO)) {
++ //printk("TUNE_READ: result<0x%x> cmd_error<%d> data_error<%d>\n",
++ // && result, mrq->cmd->error, mrq->data->error);
++ goto done;
++ }
++ }
++ }
++ cur_wrrdly = (orig_wrrdly + wrrdly + 1) % 32;
++ sdr_set_field(MSDC_PAD_TUNE, MSDC_PAD_TUNE_DATWRDLY, cur_wrrdly);
++ } while (++wrrdly < 32);
++
++ cur_dat0 = (orig_dat0 + rxdly) % 32; /* only adjust bit-1 for crc */
++ cur_dat1 = orig_dat1;
++ cur_dat2 = orig_dat2;
++ cur_dat3 = orig_dat3;
++
++ cur_rxdly0 = (cur_dat0 << 24) | (cur_dat1 << 16) | (cur_dat2 << 8) | (cur_dat3 << 0);
++ sdr_write32(MSDC_DAT_RDDLY0, cur_rxdly0);
++ } while (++rxdly < 32);
++
++done:
++ return result;
++}
++
++static int msdc_get_card_status(struct mmc_host *mmc, struct msdc_host *host, u32 *status)
++{
++ struct mmc_command cmd;
++ struct mmc_request mrq;
++ u32 err;
++
++ memset(&cmd, 0, sizeof(struct mmc_command));
++ cmd.opcode = MMC_SEND_STATUS;
++ if (mmc->card) {
++ cmd.arg = mmc->card->rca << 16;
++ } else {
++ //printk("cmd13 mmc card is null\n");
++ cmd.arg = host->app_cmd_arg;
++ }
++ cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC;
++
++ memset(&mrq, 0, sizeof(struct mmc_request));
++ mrq.cmd = &cmd; cmd.mrq = &mrq;
++ cmd.data = NULL;
++
++ err = msdc_do_command(host, &cmd, 1, CMD_TIMEOUT);
++
++ if (status)
++ *status = cmd.resp[0];
++
++ return err;
++}
++
++static int msdc_check_busy(struct mmc_host *mmc, struct msdc_host *host)
++{
++ u32 err = 0;
++ u32 status = 0;
++
++ do {
++ err = msdc_get_card_status(mmc, host, &status);
++ if (err)
++ return err;
++ /* need cmd12? */
++ //printk("cmd<13> resp<0x%x>\n", status);
++ } while (R1_CURRENT_STATE(status) == 7);
++
++ return err;
++}
++
++static int msdc_tune_request(struct mmc_host *mmc, struct mmc_request *mrq)
++{
++ struct msdc_host *host = mmc_priv(mmc);
++ struct mmc_command *cmd;
++ struct mmc_data *data;
++ int ret=0, read;
++
++ cmd = mrq->cmd;
++ data = mrq->cmd->data;
++
++ read = data->flags & MMC_DATA_READ ? 1 : 0;
++
++ if (read) {
++ if (data->error == (unsigned int)(-EIO))
++ ret = msdc_tune_bread(mmc,mrq);
++ } else {
++ ret = msdc_check_busy(mmc, host);
++ if (ret){
++ //printk("XXX cmd13 wait program done failed\n");
++ return ret;
++ }
++ /* CRC and TO */
++ /* Fix me: don't care card status? */
++ ret = msdc_tune_bwrite(mmc,mrq);
++ }
++
++ return ret;
++}
++
++static void msdc_ops_request(struct mmc_host *mmc,struct mmc_request *mrq)
++{
++ struct msdc_host *host = mmc_priv(mmc);
++
++ if (host->mrq) {
++ //printk("XXX host->mrq<0x%.8x>\n", (int)host->mrq);
++ BUG();
++ }
++ if (!is_card_present(host) || host->power_mode == MMC_POWER_OFF) {
++ //printk("cmd<%d> card<%d> power<%d>\n", mrq->cmd->opcode, is_card_present(host), host->power_mode);
++ mrq->cmd->error = (unsigned int)-ENOMEDIUM;
++ mrq->done(mrq);
++ return;
++ }
++ spin_lock(&host->lock);
++
++ host->mrq = mrq;
++
++ if (msdc_do_request(mmc,mrq))
++ if(host->hw->flags & MSDC_REMOVABLE && mrq->data && mrq->data->error)
++ msdc_tune_request(mmc,mrq);
++
++ if (mrq->cmd->opcode == MMC_APP_CMD) {
++ host->app_cmd = 1;
++ host->app_cmd_arg = mrq->cmd->arg; /* save the RCA */
++ } else {
++ host->app_cmd = 0;
++ }
++
++ host->mrq = NULL;
++
++ spin_unlock(&host->lock);
++
++ mmc_request_done(mmc, mrq);
++}
++
++/* called by ops.set_ios */
++static void msdc_set_buswidth(struct msdc_host *host, u32 width)
++{
++ u32 base = host->base;
++ u32 val = sdr_read32(SDC_CFG);
++
++ val &= ~SDC_CFG_BUSWIDTH;
++
++ switch (width) {
++ default:
++ case MMC_BUS_WIDTH_1:
++ width = 1;
++ val |= (MSDC_BUS_1BITS << 16);
++ break;
++ case MMC_BUS_WIDTH_4:
++ val |= (MSDC_BUS_4BITS << 16);
++ break;
++ case MMC_BUS_WIDTH_8:
++ val |= (MSDC_BUS_8BITS << 16);
++ break;
++ }
++
++ sdr_write32(SDC_CFG, val);
++
++ //printk("Bus Width = %d\n", width);
++}
++
++/* ops.set_ios */
++static void msdc_ops_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
++{
++ struct msdc_host *host = mmc_priv(mmc);
++ struct msdc_hw *hw=host->hw;
++ u32 base = host->base;
++ u32 ddr = 0;
++
++#ifdef MT6575_SD_DEBUG
++ static char *vdd[] = {
++ "1.50v", "1.55v", "1.60v", "1.65v", "1.70v", "1.80v", "1.90v",
++ "2.00v", "2.10v", "2.20v", "2.30v", "2.40v", "2.50v", "2.60v",
++ "2.70v", "2.80v", "2.90v", "3.00v", "3.10v", "3.20v", "3.30v",
++ "3.40v", "3.50v", "3.60v"
++ };
++ static char *power_mode[] = {
++ "OFF", "UP", "ON"
++ };
++ static char *bus_mode[] = {
++ "UNKNOWN", "OPENDRAIN", "PUSHPULL"
++ };
++ static char *timing[] = {
++ "LEGACY", "MMC_HS", "SD_HS"
++ };
++
++ /*printk("SET_IOS: CLK(%dkHz), BUS(%s), BW(%u), PWR(%s), VDD(%s), TIMING(%s)\n",
++ ios->clock / 1000, bus_mode[ios->bus_mode],
++ (ios->bus_width == MMC_BUS_WIDTH_4) ? 4 : 1,
++ power_mode[ios->power_mode], vdd[ios->vdd], timing[ios->timing]);*/
++#endif
++
++ msdc_set_buswidth(host, ios->bus_width);
++
++ /* Power control ??? */
++ switch (ios->power_mode) {
++ case MMC_POWER_OFF:
++ case MMC_POWER_UP:
++ // msdc_set_power_mode(host, ios->power_mode); /* --- by chhung */
++ break;
++ case MMC_POWER_ON:
++ host->power_mode = MMC_POWER_ON;
++ break;
++ default:
++ break;
++ }
++
++ /* Clock control */
++ if (host->mclk != ios->clock) {
++ if(ios->clock > 25000000) {
++ //printk("SD data latch edge<%d>\n", hw->data_edge);
++ sdr_set_field(MSDC_IOCON, MSDC_IOCON_RSPL, hw->cmd_edge);
++ sdr_set_field(MSDC_IOCON, MSDC_IOCON_DSPL, hw->data_edge);
++ } else {
++ sdr_write32(MSDC_IOCON, 0x00000000);
++ sdr_write32(MSDC_DAT_RDDLY0, 0x10101010); // for MT7620 E2 and afterward
++ sdr_write32(MSDC_DAT_RDDLY1, 0x00000000);
++ sdr_write32(MSDC_PAD_TUNE, 0x84101010); // for MT7620 E2 and afterward
++ }
++ msdc_set_mclk(host, ddr, ios->clock);
++ }
++}
++
++/* ops.get_ro */
++static int msdc_ops_get_ro(struct mmc_host *mmc)
++{
++ struct msdc_host *host = mmc_priv(mmc);
++ u32 base = host->base;
++ unsigned long flags;
++ int ro = 0;
++
++ if (host->hw->flags & MSDC_WP_PIN_EN) { /* set for card */
++ spin_lock_irqsave(&host->lock, flags);
++ ro = (sdr_read32(MSDC_PS) >> 31);
++ spin_unlock_irqrestore(&host->lock, flags);
++ }
++ return ro;
++}
++
++/* ops.get_cd */
++static int msdc_ops_get_cd(struct mmc_host *mmc)
++{
++ struct msdc_host *host = mmc_priv(mmc);
++ u32 base = host->base;
++ unsigned long flags;
++ int present = 1;
++
++ /* for sdio, MSDC_REMOVABLE not set, always return 1 */
++ if (!(host->hw->flags & MSDC_REMOVABLE)) {
++ /* For sdio, read H/W always get<1>, but may timeout some times */
++#if 1
++ host->card_inserted = 1;
++ return 1;
++#else
++ host->card_inserted = (host->pm_state.event == PM_EVENT_USER_RESUME) ? 1 : 0;
++ printk("sdio ops_get_cd<%d>\n", host->card_inserted);
++ return host->card_inserted;
++#endif
++ }
++
++ /* MSDC_CD_PIN_EN set for card */
++ if (host->hw->flags & MSDC_CD_PIN_EN) {
++ spin_lock_irqsave(&host->lock, flags);
++#if 0
++ present = host->card_inserted; /* why not read from H/W: Fix me*/
++#else
++ present = (sdr_read32(MSDC_PS) & MSDC_PS_CDSTS) ? 0 : 1;
++ host->card_inserted = present;
++#endif
++ spin_unlock_irqrestore(&host->lock, flags);
++ } else {
++ present = 0; /* TODO? Check DAT3 pins for card detection */
++ }
++
++ //printk("ops_get_cd return<%d>\n", present);
++ return present;
++}
++
++/* ops.enable_sdio_irq */
++static void msdc_ops_enable_sdio_irq(struct mmc_host *mmc, int enable)
++{
++ struct msdc_host *host = mmc_priv(mmc);
++ struct msdc_hw *hw = host->hw;
++ u32 base = host->base;
++ u32 tmp;
++
++ if (hw->flags & MSDC_EXT_SDIO_IRQ) { /* yes for sdio */
++ if (enable) {
++ hw->enable_sdio_eirq(); /* combo_sdio_enable_eirq */
++ } else {
++ hw->disable_sdio_eirq(); /* combo_sdio_disable_eirq */
++ }
++ } else {
++ //printk("XXX \n"); /* so never enter here */
++ tmp = sdr_read32(SDC_CFG);
++ /* FIXME. Need to interrupt gap detection */
++ if (enable) {
++ tmp |= (SDC_CFG_SDIOIDE | SDC_CFG_SDIOINTWKUP);
++ } else {
++ tmp &= ~(SDC_CFG_SDIOIDE | SDC_CFG_SDIOINTWKUP);
++ }
++ sdr_write32(SDC_CFG, tmp);
++ }
++}
++
++static struct mmc_host_ops mt_msdc_ops = {
++ .request = msdc_ops_request,
++ .set_ios = msdc_ops_set_ios,
++ .get_ro = msdc_ops_get_ro,
++ .get_cd = msdc_ops_get_cd,
++ .enable_sdio_irq = msdc_ops_enable_sdio_irq,
++};
++
++/*--------------------------------------------------------------------------*/
++/* interrupt handler */
++/*--------------------------------------------------------------------------*/
++static irqreturn_t msdc_irq(int irq, void *dev_id)
++{
++ struct msdc_host *host = (struct msdc_host *)dev_id;
++ struct mmc_data *data = host->data;
++ struct mmc_command *cmd = host->cmd;
++ u32 base = host->base;
++
++ u32 cmdsts = MSDC_INT_RSPCRCERR | MSDC_INT_CMDTMO | MSDC_INT_CMDRDY |
++ MSDC_INT_ACMDCRCERR | MSDC_INT_ACMDTMO | MSDC_INT_ACMDRDY |
++ MSDC_INT_ACMD19_DONE;
++ u32 datsts = MSDC_INT_DATCRCERR |MSDC_INT_DATTMO;
++
++ u32 intsts = sdr_read32(MSDC_INT);
++ u32 inten = sdr_read32(MSDC_INTEN); inten &= intsts;
++
++ sdr_write32(MSDC_INT, intsts); /* clear interrupts */
++ /* MSG will cause fatal error */
++
++ /* card change interrupt */
++ if (intsts & MSDC_INT_CDSC){
++ //printk("MSDC_INT_CDSC irq<0x%.8x>\n", intsts);
++ tasklet_hi_schedule(&host->card_tasklet);
++ /* tuning when plug card ? */
++ }
++
++ /* sdio interrupt */
++ if (intsts & MSDC_INT_SDIOIRQ){
++ //printk("XXX MSDC_INT_SDIOIRQ\n"); /* seems not sdio irq */
++ //mmc_signal_sdio_irq(host->mmc);
++ }
++
++ /* transfer complete interrupt */
++ if (data != NULL) {
++ if (inten & MSDC_INT_XFER_COMPL) {
++ data->bytes_xfered = host->dma.xfersz;
++ complete(&host->xfer_done);
++ }
++
++ if (intsts & datsts) {
++ /* do basic reset, or stop command will sdc_busy */
++ msdc_reset();
++ msdc_clr_fifo();
++ msdc_clr_int();
++ atomic_set(&host->abort, 1); /* For PIO mode exit */
++
++ if (intsts & MSDC_INT_DATTMO){
++ //printk("XXX CMD<%d> MSDC_INT_DATTMO\n", host->mrq->cmd->opcode);
++ data->error = (unsigned int)-ETIMEDOUT;
++ }
++ else if (intsts & MSDC_INT_DATCRCERR){
++ //printk("XXX CMD<%d> MSDC_INT_DATCRCERR, SDC_DCRC_STS<0x%x>\n", host->mrq->cmd->opcode, sdr_read32(SDC_DCRC_STS));
++ data->error = (unsigned int)-EIO;
++ }
++
++ //if(sdr_read32(MSDC_INTEN) & MSDC_INT_XFER_COMPL) {
++ if (host->dma_xfer) {
++ complete(&host->xfer_done); /* Read CRC come fast, XFER_COMPL not enabled */
++ } /* PIO mode can't do complete, because not init */
++ }
++ }
++
++ /* command interrupts */
++ if ((cmd != NULL) && (intsts & cmdsts)) {
++ if ((intsts & MSDC_INT_CMDRDY) || (intsts & MSDC_INT_ACMDRDY) ||
++ (intsts & MSDC_INT_ACMD19_DONE)) {
++ u32 *rsp = &cmd->resp[0];
++
++ switch (host->cmd_rsp) {
++ case RESP_NONE:
++ break;
++ case RESP_R2:
++ *rsp++ = sdr_read32(SDC_RESP3); *rsp++ = sdr_read32(SDC_RESP2);
++ *rsp++ = sdr_read32(SDC_RESP1); *rsp++ = sdr_read32(SDC_RESP0);
++ break;
++ default: /* Response types 1, 3, 4, 5, 6, 7(1b) */
++ if ((intsts & MSDC_INT_ACMDRDY) || (intsts & MSDC_INT_ACMD19_DONE)) {
++ *rsp = sdr_read32(SDC_ACMD_RESP);
++ } else {
++ *rsp = sdr_read32(SDC_RESP0);
++ }
++ break;
++ }
++ } else if ((intsts & MSDC_INT_RSPCRCERR) || (intsts & MSDC_INT_ACMDCRCERR)) {
++ if(intsts & MSDC_INT_ACMDCRCERR){
++ //printk("XXX CMD<%d> MSDC_INT_ACMDCRCERR\n",cmd->opcode);
++ }
++ else {
++ //printk("XXX CMD<%d> MSDC_INT_RSPCRCERR\n",cmd->opcode);
++ }
++ cmd->error = (unsigned int)-EIO;
++ } else if ((intsts & MSDC_INT_CMDTMO) || (intsts & MSDC_INT_ACMDTMO)) {
++ if(intsts & MSDC_INT_ACMDTMO){
++ //printk("XXX CMD<%d> MSDC_INT_ACMDTMO\n",cmd->opcode);
++ }
++ else {
++ //printk("XXX CMD<%d> MSDC_INT_CMDTMO\n",cmd->opcode);
++ }
++ cmd->error = (unsigned int)-ETIMEDOUT;
++ msdc_reset();
++ msdc_clr_fifo();
++ msdc_clr_int();
++ }
++ complete(&host->cmd_done);
++ }
++
++ /* mmc irq interrupts */
++ if (intsts & MSDC_INT_MMCIRQ) {
++ //printk(KERN_INFO "msdc[%d] MMCIRQ: SDC_CSTS=0x%.8x\r\n", host->id, sdr_read32(SDC_CSTS));
++ }
++
++#ifdef MT6575_SD_DEBUG
++ {
++ msdc_int_reg *int_reg = (msdc_int_reg*)&intsts;
++ /*printk("IRQ_EVT(0x%x): MMCIRQ(%d) CDSC(%d), ACRDY(%d), ACTMO(%d), ACCRE(%d) AC19DN(%d)\n",
++ intsts,
++ int_reg->mmcirq,
++ int_reg->cdsc,
++ int_reg->atocmdrdy,
++ int_reg->atocmdtmo,
++ int_reg->atocmdcrc,
++ int_reg->atocmd19done);
++ printk("IRQ_EVT(0x%x): SDIO(%d) CMDRDY(%d), CMDTMO(%d), RSPCRC(%d), CSTA(%d)\n",
++ intsts,
++ int_reg->sdioirq,
++ int_reg->cmdrdy,
++ int_reg->cmdtmo,
++ int_reg->rspcrc,
++ int_reg->csta);
++ printk("IRQ_EVT(0x%x): XFCMP(%d) DXDONE(%d), DATTMO(%d), DATCRC(%d), DMAEMP(%d)\n",
++ intsts,
++ int_reg->xfercomp,
++ int_reg->dxferdone,
++ int_reg->dattmo,
++ int_reg->datcrc,
++ int_reg->dmaqempty);*/
++
++ }
++#endif
++
++ return IRQ_HANDLED;
++}
++
++/*--------------------------------------------------------------------------*/
++/* platform_driver members */
++/*--------------------------------------------------------------------------*/
++/* called by msdc_drv_probe/remove */
++static void msdc_enable_cd_irq(struct msdc_host *host, int enable)
++{
++ struct msdc_hw *hw = host->hw;
++ u32 base = host->base;
++
++ /* for sdio, not set */
++ if ((hw->flags & MSDC_CD_PIN_EN) == 0) {
++ /* Pull down card detection pin since it is not avaiable */
++ /*
++ if (hw->config_gpio_pin)
++ hw->config_gpio_pin(MSDC_CD_PIN, GPIO_PULL_DOWN);
++ */
++ sdr_clr_bits(MSDC_PS, MSDC_PS_CDEN);
++ sdr_clr_bits(MSDC_INTEN, MSDC_INTEN_CDSC);
++ sdr_clr_bits(SDC_CFG, SDC_CFG_INSWKUP);
++ return;
++ }
++
++ //printk("CD IRQ Eanable(%d)\n", enable);
++
++ if (enable) {
++ if (hw->enable_cd_eirq) { /* not set, never enter */
++ hw->enable_cd_eirq();
++ } else {
++ /* card detection circuit relies on the core power so that the core power
++ * shouldn't be turned off. Here adds a reference count to keep
++ * the core power alive.
++ */
++ //msdc_vcore_on(host); //did in msdc_init_hw()
++
++ if (hw->config_gpio_pin) /* NULL */
++ hw->config_gpio_pin(MSDC_CD_PIN, GPIO_PULL_UP);
++
++ sdr_set_field(MSDC_PS, MSDC_PS_CDDEBOUNCE, DEFAULT_DEBOUNCE);
++ sdr_set_bits(MSDC_PS, MSDC_PS_CDEN);
++ sdr_set_bits(MSDC_INTEN, MSDC_INTEN_CDSC);
++ sdr_set_bits(SDC_CFG, SDC_CFG_INSWKUP); /* not in document! Fix me */
++ }
++ } else {
++ if (hw->disable_cd_eirq) {
++ hw->disable_cd_eirq();
++ } else {
++ if (hw->config_gpio_pin) /* NULL */
++ hw->config_gpio_pin(MSDC_CD_PIN, GPIO_PULL_DOWN);
++
++ sdr_clr_bits(SDC_CFG, SDC_CFG_INSWKUP);
++ sdr_clr_bits(MSDC_PS, MSDC_PS_CDEN);
++ sdr_clr_bits(MSDC_INTEN, MSDC_INTEN_CDSC);
++
++ /* Here decreases a reference count to core power since card
++ * detection circuit is shutdown.
++ */
++ //msdc_vcore_off(host);
++ }
++ }
++}
++
++/* called by msdc_drv_probe */
++static void msdc_init_hw(struct msdc_host *host)
++{
++ u32 base = host->base;
++ struct msdc_hw *hw = host->hw;
++
++#ifdef MT6575_SD_DEBUG
++ msdc_reg[host->id] = (struct msdc_regs *)host->base;
++#endif
++
++ /* Power on */
++#if 0 /* --- chhung */
++ msdc_vcore_on(host);
++ msdc_pin_reset(host, MSDC_PIN_PULL_UP);
++ msdc_select_clksrc(host, hw->clk_src);
++ enable_clock(PERI_MSDC0_PDN + host->id, "SD");
++ msdc_vdd_on(host);
++#endif /* end of --- */
++ /* Configure to MMC/SD mode */
++ sdr_set_field(MSDC_CFG, MSDC_CFG_MODE, MSDC_SDMMC);
++
++ /* Reset */
++ msdc_reset();
++ msdc_clr_fifo();
++
++ /* Disable card detection */
++ sdr_clr_bits(MSDC_PS, MSDC_PS_CDEN);
++
++ /* Disable and clear all interrupts */
++ sdr_clr_bits(MSDC_INTEN, sdr_read32(MSDC_INTEN));
++ sdr_write32(MSDC_INT, sdr_read32(MSDC_INT));
++
++#if 1
++ /* reset tuning parameter */
++ sdr_write32(MSDC_PAD_CTL0, 0x00090000);
++ sdr_write32(MSDC_PAD_CTL1, 0x000A0000);
++ sdr_write32(MSDC_PAD_CTL2, 0x000A0000);
++ // sdr_write32(MSDC_PAD_TUNE, 0x00000000);
++ sdr_write32(MSDC_PAD_TUNE, 0x84101010); // for MT7620 E2 and afterward
++ // sdr_write32(MSDC_DAT_RDDLY0, 0x00000000);
++ sdr_write32(MSDC_DAT_RDDLY0, 0x10101010); // for MT7620 E2 and afterward
++ sdr_write32(MSDC_DAT_RDDLY1, 0x00000000);
++ sdr_write32(MSDC_IOCON, 0x00000000);
++#if 0 // use MT7620 default value: 0x403c004f
++ sdr_write32(MSDC_PATCH_BIT0, 0x003C000F); /* bit0 modified: Rx Data Clock Source: 1 -> 2.0*/
++#endif
++
++ if (sdr_read32(MSDC_ECO_VER) >= 4) {
++ if (host->id == 1) {
++ sdr_set_field(MSDC_PATCH_BIT1, MSDC_PATCH_BIT1_WRDAT_CRCS, 1);
++ sdr_set_field(MSDC_PATCH_BIT1, MSDC_PATCH_BIT1_CMD_RSP, 1);
++
++ /* internal clock: latch read data */
++ sdr_set_bits(MSDC_PATCH_BIT0, MSDC_PATCH_BIT_CKGEN_CK);
++ }
++ }
++#endif
++
++ /* for safety, should clear SDC_CFG.SDIO_INT_DET_EN & set SDC_CFG.SDIO in
++ pre-loader,uboot,kernel drivers. and SDC_CFG.SDIO_INT_DET_EN will be only
++ set when kernel driver wants to use SDIO bus interrupt */
++ /* Configure to enable SDIO mode. it's must otherwise sdio cmd5 failed */
++ sdr_set_bits(SDC_CFG, SDC_CFG_SDIO);
++
++ /* disable detect SDIO device interupt function */
++ sdr_clr_bits(SDC_CFG, SDC_CFG_SDIOIDE);
++
++ /* eneable SMT for glitch filter */
++ sdr_set_bits(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKSMT);
++ sdr_set_bits(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDSMT);
++ sdr_set_bits(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATSMT);
++
++#if 1
++ /* set clk, cmd, dat pad driving */
++ sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKDRVN, hw->clk_drv);
++ sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKDRVP, hw->clk_drv);
++ sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDDRVN, hw->cmd_drv);
++ sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDDRVP, hw->cmd_drv);
++ sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATDRVN, hw->dat_drv);
++ sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATDRVP, hw->dat_drv);
++#else
++ sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKDRVN, 0);
++ sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKDRVP, 0);
++ sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDDRVN, 0);
++ sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDDRVP, 0);
++ sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATDRVN, 0);
++ sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATDRVP, 0);
++#endif
++
++ /* set sampling edge */
++
++ /* write crc timeout detection */
++ sdr_set_field(MSDC_PATCH_BIT0, 1 << 30, 1);
++
++ /* Configure to default data timeout */
++ sdr_set_field(SDC_CFG, SDC_CFG_DTOC, DEFAULT_DTOC);
++
++ msdc_set_buswidth(host, MMC_BUS_WIDTH_1);
++
++ //printk("init hardware done!\n");
++}
++
++/* called by msdc_drv_remove */
++static void msdc_deinit_hw(struct msdc_host *host)
++{
++ u32 base = host->base;
++
++ /* Disable and clear all interrupts */
++ sdr_clr_bits(MSDC_INTEN, sdr_read32(MSDC_INTEN));
++ sdr_write32(MSDC_INT, sdr_read32(MSDC_INT));
++
++ /* Disable card detection */
++ msdc_enable_cd_irq(host, 0);
++ // msdc_set_power_mode(host, MMC_POWER_OFF); /* make sure power down */ /* --- by chhung */
++}
++
++/* init gpd and bd list in msdc_drv_probe */
++static void msdc_init_gpd_bd(struct msdc_host *host, struct msdc_dma *dma)
++{
++ gpd_t *gpd = dma->gpd;
++ bd_t *bd = dma->bd;
++ bd_t *ptr, *prev;
++
++ /* we just support one gpd */
++ int bdlen = MAX_BD_PER_GPD;
++
++ /* init the 2 gpd */
++ memset(gpd, 0, sizeof(gpd_t) * 2);
++ //gpd->next = (void *)virt_to_phys(gpd + 1); /* pointer to a null gpd, bug! kmalloc <-> virt_to_phys */
++ //gpd->next = (dma->gpd_addr + 1); /* bug */
++ gpd->next = (void *)((u32)dma->gpd_addr + sizeof(gpd_t));
++
++ //gpd->intr = 0;
++ gpd->bdp = 1; /* hwo, cs, bd pointer */
++ //gpd->ptr = (void*)virt_to_phys(bd);
++ gpd->ptr = (void *)dma->bd_addr; /* physical address */
++
++ memset(bd, 0, sizeof(bd_t) * bdlen);
++ ptr = bd + bdlen - 1;
++ //ptr->eol = 1; /* 0 or 1 [Fix me]*/
++ //ptr->next = 0;
++
++ while (ptr != bd) {
++ prev = ptr - 1;
++ prev->next = (void *)(dma->bd_addr + sizeof(bd_t) *(ptr - bd));
++ ptr = prev;
++ }
++}
++
++static int msdc_drv_probe(struct platform_device *pdev)
++{
++ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ __iomem void *base;
++ struct mmc_host *mmc;
++ struct resource *mem;
++ struct msdc_host *host;
++ struct msdc_hw *hw;
++ int ret, irq;
++ pdev->dev.platform_data = &msdc0_hw;
++
++ /* Allocate MMC host for this device */
++ mmc = mmc_alloc_host(sizeof(struct msdc_host), &pdev->dev);
++ if (!mmc) return -ENOMEM;
++
++ hw = (struct msdc_hw*)pdev->dev.platform_data;
++ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ irq = platform_get_irq(pdev, 0);
++
++ //BUG_ON((!hw) || (!mem) || (irq < 0)); /* --- by chhung */
++
++ base = devm_request_and_ioremap(&pdev->dev, res);
++ if (IS_ERR(base))
++ return PTR_ERR(base);
++
++/* mem = request_mem_region(mem->start - 0xa0000000, (mem->end - mem->start + 1) - 0xa0000000, dev_name(&pdev->dev));
++ if (mem == NULL) {
++ mmc_free_host(mmc);
++ return -EBUSY;
++ }
++*/
++ /* Set host parameters to mmc */
++ mmc->ops = &mt_msdc_ops;
++ mmc->f_min = HOST_MIN_MCLK;
++ mmc->f_max = HOST_MAX_MCLK;
++ mmc->ocr_avail = MSDC_OCR_AVAIL;
++
++ /* For sd card: MSDC_SYS_SUSPEND | MSDC_WP_PIN_EN | MSDC_CD_PIN_EN | MSDC_REMOVABLE | MSDC_HIGHSPEED,
++ For sdio : MSDC_EXT_SDIO_IRQ | MSDC_HIGHSPEED */
++ if (hw->flags & MSDC_HIGHSPEED) {
++ mmc->caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED;
++ }
++ if (hw->data_pins == 4) { /* current data_pins are all 4*/
++ mmc->caps |= MMC_CAP_4_BIT_DATA;
++ } else if (hw->data_pins == 8) {
++ mmc->caps |= MMC_CAP_8_BIT_DATA;
++ }
++ if ((hw->flags & MSDC_SDIO_IRQ) || (hw->flags & MSDC_EXT_SDIO_IRQ))
++ mmc->caps |= MMC_CAP_SDIO_IRQ; /* yes for sdio */
++
++ /* MMC core transfer sizes tunable parameters */
++ // mmc->max_hw_segs = MAX_HW_SGMTS;
++// mmc->max_phys_segs = MAX_PHY_SGMTS;
++ mmc->max_seg_size = MAX_SGMT_SZ;
++ mmc->max_blk_size = HOST_MAX_BLKSZ;
++ mmc->max_req_size = MAX_REQ_SZ;
++ mmc->max_blk_count = mmc->max_req_size;
++
++ host = mmc_priv(mmc);
++ host->hw = hw;
++ host->mmc = mmc;
++ host->id = pdev->id;
++ host->error = 0;
++ host->irq = irq;
++ host->base = (unsigned long) base;
++ host->mclk = 0; /* mclk: the request clock of mmc sub-system */
++ host->hclk = hclks[hw->clk_src]; /* hclk: clock of clock source to msdc controller */
++ host->sclk = 0; /* sclk: the really clock after divition */
++ host->pm_state = PMSG_RESUME;
++ host->suspend = 0;
++ host->core_clkon = 0;
++ host->card_clkon = 0;
++ host->core_power = 0;
++ host->power_mode = MMC_POWER_OFF;
++// host->card_inserted = hw->flags & MSDC_REMOVABLE ? 0 : 1;
++ host->timeout_ns = 0;
++ host->timeout_clks = DEFAULT_DTOC * 65536;
++
++ host->mrq = NULL;
++ //init_MUTEX(&host->sem); /* we don't need to support multiple threads access */
++
++ host->dma.used_gpd = 0;
++ host->dma.used_bd = 0;
++
++ /* using dma_alloc_coherent*/ /* todo: using 1, for all 4 slots */
++ host->dma.gpd = dma_alloc_coherent(NULL, MAX_GPD_NUM * sizeof(gpd_t), &host->dma.gpd_addr, GFP_KERNEL);
++ host->dma.bd = dma_alloc_coherent(NULL, MAX_BD_NUM * sizeof(bd_t), &host->dma.bd_addr, GFP_KERNEL);
++ BUG_ON((!host->dma.gpd) || (!host->dma.bd));
++ msdc_init_gpd_bd(host, &host->dma);
++ /*for emmc*/
++ msdc_6575_host[pdev->id] = host;
++
++ tasklet_init(&host->card_tasklet, msdc_tasklet_card, (ulong)host);
++ spin_lock_init(&host->lock);
++ msdc_init_hw(host);
++
++ ret = request_irq((unsigned int)irq, msdc_irq, IRQF_TRIGGER_LOW, dev_name(&pdev->dev), host);
++ if (ret) goto release;
++ // mt65xx_irq_unmask(irq); /* --- by chhung */
++
++ if (hw->flags & MSDC_CD_PIN_EN) { /* not set for sdio */
++ if (hw->request_cd_eirq) { /* not set for MT6575 */
++ hw->request_cd_eirq(msdc_eirq_cd, (void*)host); /* msdc_eirq_cd will not be used! */
++ }
++ }
++
++ if (hw->request_sdio_eirq) /* set to combo_sdio_request_eirq() for WIFI */
++ hw->request_sdio_eirq(msdc_eirq_sdio, (void*)host); /* msdc_eirq_sdio() will be called when EIRQ */
++
++ if (hw->register_pm) {/* yes for sdio */
++ if(hw->flags & MSDC_SYS_SUSPEND) { /* will not set for WIFI */
++ //printk("MSDC_SYS_SUSPEND and register_pm both set\n");
++ }
++ //mmc->pm_flags |= MMC_PM_IGNORE_PM_NOTIFY; /* pm not controlled by system but by client. */ /* --- by chhung */
++ }
++
++ platform_set_drvdata(pdev, mmc);
++
++ ret = mmc_add_host(mmc);
++ if (ret) goto free_irq;
++
++ /* Config card detection pin and enable interrupts */
++ if (hw->flags & MSDC_CD_PIN_EN) { /* set for card */
++ msdc_enable_cd_irq(host, 1);
++ } else {
++ msdc_enable_cd_irq(host, 0);
++ }
++
++ return 0;
++
++free_irq:
++ free_irq(irq, host);
++release:
++ platform_set_drvdata(pdev, NULL);
++ msdc_deinit_hw(host);
++
++ tasklet_kill(&host->card_tasklet);
++
++/* if (mem)
++ release_mem_region(mem->start, mem->end - mem->start + 1);
++*/
++ mmc_free_host(mmc);
++
++ return ret;
++}
++
++/* 4 device share one driver, using "drvdata" to show difference */
++static int msdc_drv_remove(struct platform_device *pdev)
++{
++ struct mmc_host *mmc;
++ struct msdc_host *host;
++ struct resource *mem;
++
++
++ mmc = platform_get_drvdata(pdev);
++ BUG_ON(!mmc);
++
++ host = mmc_priv(mmc);
++ BUG_ON(!host);
++
++ //printk("removed !!!\n");
++
++ platform_set_drvdata(pdev, NULL);
++ mmc_remove_host(host->mmc);
++ msdc_deinit_hw(host);
++
++ tasklet_kill(&host->card_tasklet);
++ free_irq(host->irq, host);
++
++ dma_free_coherent(NULL, MAX_GPD_NUM * sizeof(gpd_t), host->dma.gpd, host->dma.gpd_addr);
++ dma_free_coherent(NULL, MAX_BD_NUM * sizeof(bd_t), host->dma.bd, host->dma.bd_addr);
++
++ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++
++ if (mem)
++ release_mem_region(mem->start, mem->end - mem->start + 1);
++
++ mmc_free_host(host->mmc);
++
++ return 0;
++}
++
++static const struct of_device_id mt7620a_sdhci_match[] = {
++ { .compatible = "ralink,mt7620a-sdhci" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, rt288x_wdt_match);
++
++/* Fix me: Power Flow */
++static struct platform_driver mt_msdc_driver = {
++ .probe = msdc_drv_probe,
++ .remove = msdc_drv_remove,
++ .driver = {
++ .name = DRV_NAME,
++ .owner = THIS_MODULE,
++ .of_match_table = mt7620a_sdhci_match,
++
++ },
++};
++
++static int __init mt_msdc_init(void)
++{
++ int ret;
++/* +++ chhung */
++ unsigned int reg;
++
++ mtk_sd_device.dev.platform_data = &msdc0_hw;
++ printk("MTK MSDC device init.\n");
++ reg = sdr_read32((__iomem void *) 0xb0000060) & ~(0x3<<18);
++ reg |= 0x1 << 18;
++ sdr_write32((__iomem void *) 0xb0000060, reg);
++/* end of +++ */
++ ret = platform_driver_register(&mt_msdc_driver);
++ if (ret) {
++ printk(KERN_ERR DRV_NAME ": Can't register driver");
++ return ret;
++ }
++ printk(KERN_INFO DRV_NAME ": MediaTek MT6575 MSDC Driver\n");
++
++ //msdc_debug_proc_init();
++ return 0;
++}
++
++static void __exit mt_msdc_exit(void)
++{
++ platform_driver_unregister(&mt_msdc_driver);
++}
++
++module_init(mt_msdc_init);
++module_exit(mt_msdc_exit);
++MODULE_LICENSE("GPL");
++MODULE_DESCRIPTION("MediaTek MT6575 SD/MMC Card Driver");
++MODULE_AUTHOR("Infinity Chen <infinity.chen@mediatek.com>");
++
++EXPORT_SYMBOL(msdc_6575_host);
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0054-DMA-ralink-add-rt2880-dma-engine.patch b/target/linux/ramips/patches-3.14/0054-DMA-ralink-add-rt2880-dma-engine.patch
new file mode 100644
index 0000000000..28dd8964b2
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0054-DMA-ralink-add-rt2880-dma-engine.patch
@@ -0,0 +1,676 @@
+From cf93418a4bd5e69f069a65da92537bd4d6191223 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 27 Jul 2014 09:29:51 +0100
+Subject: [PATCH 54/57] DMA: ralink: add rt2880 dma engine
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/dma/Kconfig | 6 +
+ drivers/dma/Makefile | 1 +
+ drivers/dma/dmaengine.c | 26 ++
+ drivers/dma/ralink-gdma.c | 577 +++++++++++++++++++++++++++++++++++++++++++++
+ include/linux/dmaengine.h | 1 +
+ 5 files changed, 611 insertions(+)
+ create mode 100644 drivers/dma/ralink-gdma.c
+
+diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
+index 605b016..a9b31ff 100644
+--- a/drivers/dma/Kconfig
++++ b/drivers/dma/Kconfig
+@@ -351,6 +351,12 @@ config MOXART_DMA
+ help
+ Enable support for the MOXA ART SoC DMA controller.
+
++config DMA_RALINK
++ tristate "RALINK DMA support"
++ depends on RALINK && SOC_MT7620
++ select DMA_ENGINE
++ select DMA_VIRTUAL_CHANNELS
++
+ config DMA_ENGINE
+ bool
+
+diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
+index a029d0f4..419ccc2 100644
+--- a/drivers/dma/Makefile
++++ b/drivers/dma/Makefile
+@@ -44,3 +44,4 @@ obj-$(CONFIG_DMA_JZ4740) += dma-jz4740.o
+ obj-$(CONFIG_TI_CPPI41) += cppi41.o
+ obj-$(CONFIG_K3_DMA) += k3dma.o
+ obj-$(CONFIG_MOXART_DMA) += moxart-dma.o
++obj-$(CONFIG_DMA_RALINK) += ralink-gdma.o
+diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
+index ed610b4..cc11e0b 100644
+--- a/drivers/dma/dmaengine.c
++++ b/drivers/dma/dmaengine.c
+@@ -564,6 +564,32 @@ struct dma_chan *dma_get_any_slave_channel(struct dma_device *device)
+ EXPORT_SYMBOL_GPL(dma_get_any_slave_channel);
+
+ /**
++ * dma_request_slave_channel - try to get specific channel exclusively
++ * @chan: target channel
++ */
++struct dma_chan *dma_get_slave_channel(struct dma_chan *chan)
++{
++ int err = -EBUSY;
++
++ /* lock against __dma_request_channel */
++ mutex_lock(&dma_list_mutex);
++
++ if (chan->client_count == 0) {
++ err = dma_chan_get(chan);
++ if (err)
++ pr_debug("%s: failed to get %s: (%d)\n",
++ __func__, dma_chan_name(chan), err);
++ } else
++ chan = NULL;
++
++ mutex_unlock(&dma_list_mutex);
++
++ return chan;
++}
++EXPORT_SYMBOL_GPL(dma_get_slave_channel);
++
++
++/**
+ * __dma_request_channel - try to allocate an exclusive channel
+ * @mask: capabilities that the channel must satisfy
+ * @fn: optional callback to disposition available channels
+diff --git a/drivers/dma/ralink-gdma.c b/drivers/dma/ralink-gdma.c
+new file mode 100644
+index 0000000..2c3cace
+--- /dev/null
++++ b/drivers/dma/ralink-gdma.c
+@@ -0,0 +1,577 @@
++/*
++ * Copyright (C) 2013, Lars-Peter Clausen <lars@metafoo.de>
++ * GDMA4740 DMAC support
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 675 Mass Ave, Cambridge, MA 02139, USA.
++ *
++ */
++
++#include <linux/dmaengine.h>
++#include <linux/dma-mapping.h>
++#include <linux/err.h>
++#include <linux/init.h>
++#include <linux/list.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/slab.h>
++#include <linux/spinlock.h>
++#include <linux/irq.h>
++#include <linux/of_dma.h>
++
++#include "virt-dma.h"
++
++#define GDMA_NR_CHANS 16
++
++#define GDMA_REG_SRC_ADDR(x) (0x00 + (x) * 0x10)
++#define GDMA_REG_DST_ADDR(x) (0x04 + (x) * 0x10)
++
++#define GDMA_REG_CTRL0(x) (0x08 + (x) * 0x10)
++#define GDMA_REG_CTRL0_TX_MASK 0xffff
++#define GDMA_REG_CTRL0_TX_SHIFT 16
++#define GDMA_REG_CTRL0_CURR_MASK 0xff
++#define GDMA_REG_CTRL0_CURR_SHIFT 8
++#define GDMA_REG_CTRL0_SRC_ADDR_FIXED BIT(7)
++#define GDMA_REG_CTRL0_DST_ADDR_FIXED BIT(6)
++#define GDMA_REG_CTRL0_BURST_MASK 0x7
++#define GDMA_REG_CTRL0_BURST_SHIFT 3
++#define GDMA_REG_CTRL0_DONE_INT BIT(2)
++#define GDMA_REG_CTRL0_ENABLE BIT(1)
++#define GDMA_REG_CTRL0_HW_MODE 0
++
++#define GDMA_REG_CTRL1(x) (0x0c + (x) * 0x10)
++#define GDMA_REG_CTRL1_SEG_MASK 0xf
++#define GDMA_REG_CTRL1_SEG_SHIFT 22
++#define GDMA_REG_CTRL1_REQ_MASK 0x3f
++#define GDMA_REG_CTRL1_SRC_REQ_SHIFT 16
++#define GDMA_REG_CTRL1_DST_REQ_SHIFT 8
++#define GDMA_REG_CTRL1_CONTINOUS BIT(14)
++#define GDMA_REG_CTRL1_NEXT_MASK 0x1f
++#define GDMA_REG_CTRL1_NEXT_SHIFT 3
++#define GDMA_REG_CTRL1_COHERENT BIT(2)
++#define GDMA_REG_CTRL1_FAIL BIT(1)
++#define GDMA_REG_CTRL1_MASK BIT(0)
++
++#define GDMA_REG_UNMASK_INT 0x200
++#define GDMA_REG_DONE_INT 0x204
++
++#define GDMA_REG_GCT 0x220
++#define GDMA_REG_GCT_CHAN_MASK 0x3
++#define GDMA_REG_GCT_CHAN_SHIFT 3
++#define GDMA_REG_GCT_VER_MASK 0x3
++#define GDMA_REG_GCT_VER_SHIFT 1
++#define GDMA_REG_GCT_ARBIT_RR BIT(0)
++
++enum gdma_dma_transfer_size {
++ GDMA_TRANSFER_SIZE_4BYTE = 0,
++ GDMA_TRANSFER_SIZE_8BYTE = 1,
++ GDMA_TRANSFER_SIZE_16BYTE = 2,
++ GDMA_TRANSFER_SIZE_32BYTE = 3,
++};
++
++struct gdma_dma_sg {
++ dma_addr_t addr;
++ unsigned int len;
++};
++
++struct gdma_dma_desc {
++ struct virt_dma_desc vdesc;
++
++ enum dma_transfer_direction direction;
++ bool cyclic;
++
++ unsigned int num_sgs;
++ struct gdma_dma_sg sg[];
++};
++
++struct gdma_dmaengine_chan {
++ struct virt_dma_chan vchan;
++ unsigned int id;
++
++ dma_addr_t fifo_addr;
++ unsigned int transfer_shift;
++
++ struct gdma_dma_desc *desc;
++ unsigned int next_sg;
++};
++
++struct gdma_dma_dev {
++ struct dma_device ddev;
++ void __iomem *base;
++ struct clk *clk;
++
++ struct gdma_dmaengine_chan chan[GDMA_NR_CHANS];
++};
++
++static struct gdma_dma_dev *gdma_dma_chan_get_dev(
++ struct gdma_dmaengine_chan *chan)
++{
++ return container_of(chan->vchan.chan.device, struct gdma_dma_dev,
++ ddev);
++}
++
++static struct gdma_dmaengine_chan *to_gdma_dma_chan(struct dma_chan *c)
++{
++ return container_of(c, struct gdma_dmaengine_chan, vchan.chan);
++}
++
++static struct gdma_dma_desc *to_gdma_dma_desc(struct virt_dma_desc *vdesc)
++{
++ return container_of(vdesc, struct gdma_dma_desc, vdesc);
++}
++
++static inline uint32_t gdma_dma_read(struct gdma_dma_dev *dma_dev,
++ unsigned int reg)
++{
++ return readl(dma_dev->base + reg);
++}
++
++static inline void gdma_dma_write(struct gdma_dma_dev *dma_dev,
++ unsigned reg, uint32_t val)
++{
++ //printk("gdma --> %p = 0x%08X\n", dma_dev->base + reg, val);
++ writel(val, dma_dev->base + reg);
++}
++
++static inline void gdma_dma_write_mask(struct gdma_dma_dev *dma_dev,
++ unsigned int reg, uint32_t val, uint32_t mask)
++{
++ uint32_t tmp;
++
++ tmp = gdma_dma_read(dma_dev, reg);
++ tmp &= ~mask;
++ tmp |= val;
++ gdma_dma_write(dma_dev, reg, tmp);
++}
++
++static struct gdma_dma_desc *gdma_dma_alloc_desc(unsigned int num_sgs)
++{
++ return kzalloc(sizeof(struct gdma_dma_desc) +
++ sizeof(struct gdma_dma_sg) * num_sgs, GFP_ATOMIC);
++}
++
++static enum gdma_dma_transfer_size gdma_dma_maxburst(u32 maxburst)
++{
++ if (maxburst <= 7)
++ return GDMA_TRANSFER_SIZE_4BYTE;
++ else if (maxburst <= 15)
++ return GDMA_TRANSFER_SIZE_8BYTE;
++ else if (maxburst <= 31)
++ return GDMA_TRANSFER_SIZE_16BYTE;
++
++ return GDMA_TRANSFER_SIZE_32BYTE;
++}
++
++static int gdma_dma_slave_config(struct dma_chan *c,
++ const struct dma_slave_config *config)
++{
++ struct gdma_dmaengine_chan *chan = to_gdma_dma_chan(c);
++ struct gdma_dma_dev *dma_dev = gdma_dma_chan_get_dev(chan);
++ enum gdma_dma_transfer_size transfer_size;
++ uint32_t flags;
++ uint32_t ctrl0, ctrl1;
++
++ switch (config->direction) {
++ case DMA_MEM_TO_DEV:
++ ctrl1 = 32 << GDMA_REG_CTRL1_SRC_REQ_SHIFT;
++ ctrl1 |= config->slave_id << GDMA_REG_CTRL1_DST_REQ_SHIFT;
++ flags = GDMA_REG_CTRL0_DST_ADDR_FIXED;
++ transfer_size = gdma_dma_maxburst(config->dst_maxburst);
++ chan->fifo_addr = config->dst_addr;
++ break;
++
++ case DMA_DEV_TO_MEM:
++ ctrl1 = config->slave_id << GDMA_REG_CTRL1_SRC_REQ_SHIFT;
++ ctrl1 |= 32 << GDMA_REG_CTRL1_DST_REQ_SHIFT;
++ flags = GDMA_REG_CTRL0_SRC_ADDR_FIXED;
++ transfer_size = gdma_dma_maxburst(config->src_maxburst);
++ chan->fifo_addr = config->src_addr;
++ break;
++
++ default:
++ return -EINVAL;
++ }
++
++ chan->transfer_shift = 1 + transfer_size;
++
++ ctrl0 = flags | GDMA_REG_CTRL0_HW_MODE;
++ ctrl0 |= GDMA_REG_CTRL0_DONE_INT;
++
++ ctrl1 &= ~(GDMA_REG_CTRL1_NEXT_MASK << GDMA_REG_CTRL1_NEXT_SHIFT);
++ ctrl1 |= chan->id << GDMA_REG_CTRL1_NEXT_SHIFT;
++ ctrl1 |= GDMA_REG_CTRL1_FAIL;
++ ctrl1 &= ~GDMA_REG_CTRL1_CONTINOUS;
++ gdma_dma_write(dma_dev, GDMA_REG_CTRL0(chan->id), ctrl0);
++ gdma_dma_write(dma_dev, GDMA_REG_CTRL1(chan->id), ctrl1);
++
++ return 0;
++}
++
++static int gdma_dma_terminate_all(struct dma_chan *c)
++{
++ struct gdma_dmaengine_chan *chan = to_gdma_dma_chan(c);
++ struct gdma_dma_dev *dma_dev = gdma_dma_chan_get_dev(chan);
++ unsigned long flags;
++ LIST_HEAD(head);
++
++ spin_lock_irqsave(&chan->vchan.lock, flags);
++ gdma_dma_write_mask(dma_dev, GDMA_REG_CTRL0(chan->id), 0,
++ GDMA_REG_CTRL0_ENABLE);
++ chan->desc = NULL;
++ vchan_get_all_descriptors(&chan->vchan, &head);
++ spin_unlock_irqrestore(&chan->vchan.lock, flags);
++
++ vchan_dma_desc_free_list(&chan->vchan, &head);
++
++ return 0;
++}
++
++static int gdma_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
++ unsigned long arg)
++{
++ struct dma_slave_config *config = (struct dma_slave_config *)arg;
++
++ switch (cmd) {
++ case DMA_SLAVE_CONFIG:
++ return gdma_dma_slave_config(chan, config);
++ case DMA_TERMINATE_ALL:
++ return gdma_dma_terminate_all(chan);
++ default:
++ return -ENOSYS;
++ }
++}
++
++static int gdma_dma_start_transfer(struct gdma_dmaengine_chan *chan)
++{
++ struct gdma_dma_dev *dma_dev = gdma_dma_chan_get_dev(chan);
++ dma_addr_t src_addr, dst_addr;
++ struct virt_dma_desc *vdesc;
++ struct gdma_dma_sg *sg;
++
++ gdma_dma_write_mask(dma_dev, GDMA_REG_CTRL0(chan->id), 0,
++ GDMA_REG_CTRL0_ENABLE);
++
++ if (!chan->desc) {
++ vdesc = vchan_next_desc(&chan->vchan);
++ if (!vdesc)
++ return 0;
++ chan->desc = to_gdma_dma_desc(vdesc);
++ chan->next_sg = 0;
++ }
++
++ if (chan->next_sg == chan->desc->num_sgs)
++ chan->next_sg = 0;
++
++ sg = &chan->desc->sg[chan->next_sg];
++
++ if (chan->desc->direction == DMA_MEM_TO_DEV) {
++ src_addr = sg->addr;
++ dst_addr = chan->fifo_addr;
++ } else {
++ src_addr = chan->fifo_addr;
++ dst_addr = sg->addr;
++ }
++ gdma_dma_write(dma_dev, GDMA_REG_SRC_ADDR(chan->id), src_addr);
++ gdma_dma_write(dma_dev, GDMA_REG_DST_ADDR(chan->id), dst_addr);
++ gdma_dma_write_mask(dma_dev, GDMA_REG_CTRL0(chan->id),
++ (sg->len << GDMA_REG_CTRL0_TX_SHIFT) | GDMA_REG_CTRL0_ENABLE,
++ GDMA_REG_CTRL0_TX_MASK << GDMA_REG_CTRL0_TX_SHIFT);
++ chan->next_sg++;
++ gdma_dma_write_mask(dma_dev, GDMA_REG_CTRL1(chan->id), 0, GDMA_REG_CTRL1_MASK);
++
++ return 0;
++}
++
++static void gdma_dma_chan_irq(struct gdma_dmaengine_chan *chan)
++{
++ spin_lock(&chan->vchan.lock);
++ if (chan->desc) {
++ if (chan->desc && chan->desc->cyclic) {
++ vchan_cyclic_callback(&chan->desc->vdesc);
++ } else {
++ if (chan->next_sg == chan->desc->num_sgs) {
++ chan->desc = NULL;
++ vchan_cookie_complete(&chan->desc->vdesc);
++ }
++ }
++ }
++ gdma_dma_start_transfer(chan);
++ spin_unlock(&chan->vchan.lock);
++}
++
++static irqreturn_t gdma_dma_irq(int irq, void *devid)
++{
++ struct gdma_dma_dev *dma_dev = devid;
++ uint32_t unmask, done;
++ unsigned int i;
++
++ unmask = gdma_dma_read(dma_dev, GDMA_REG_UNMASK_INT);
++ gdma_dma_write(dma_dev, GDMA_REG_UNMASK_INT, unmask);
++ done = gdma_dma_read(dma_dev, GDMA_REG_DONE_INT);
++
++ for (i = 0; i < GDMA_NR_CHANS; ++i)
++ if (done & BIT(i))
++ gdma_dma_chan_irq(&dma_dev->chan[i]);
++ gdma_dma_write(dma_dev, GDMA_REG_DONE_INT, done);
++
++ return IRQ_HANDLED;
++}
++
++static void gdma_dma_issue_pending(struct dma_chan *c)
++{
++ struct gdma_dmaengine_chan *chan = to_gdma_dma_chan(c);
++ unsigned long flags;
++
++ spin_lock_irqsave(&chan->vchan.lock, flags);
++ if (vchan_issue_pending(&chan->vchan) && !chan->desc)
++ gdma_dma_start_transfer(chan);
++ spin_unlock_irqrestore(&chan->vchan.lock, flags);
++}
++
++static struct dma_async_tx_descriptor *gdma_dma_prep_slave_sg(
++ struct dma_chan *c, struct scatterlist *sgl,
++ unsigned int sg_len, enum dma_transfer_direction direction,
++ unsigned long flags, void *context)
++{
++ struct gdma_dmaengine_chan *chan = to_gdma_dma_chan(c);
++ struct gdma_dma_desc *desc;
++ struct scatterlist *sg;
++ unsigned int i;
++
++ desc = gdma_dma_alloc_desc(sg_len);
++ if (!desc)
++ return NULL;
++
++ for_each_sg(sgl, sg, sg_len, i) {
++ desc->sg[i].addr = sg_dma_address(sg);
++ desc->sg[i].len = sg_dma_len(sg);
++ }
++
++ desc->num_sgs = sg_len;
++ desc->direction = direction;
++ desc->cyclic = false;
++
++ return vchan_tx_prep(&chan->vchan, &desc->vdesc, flags);
++}
++
++static struct dma_async_tx_descriptor *gdma_dma_prep_dma_cyclic(
++ struct dma_chan *c, dma_addr_t buf_addr, size_t buf_len,
++ size_t period_len, enum dma_transfer_direction direction,
++ unsigned long flags, void *context)
++{
++ struct gdma_dmaengine_chan *chan = to_gdma_dma_chan(c);
++ struct gdma_dma_desc *desc;
++ unsigned int num_periods, i;
++
++ if (buf_len % period_len)
++ return NULL;
++
++ num_periods = buf_len / period_len;
++
++ desc = gdma_dma_alloc_desc(num_periods);
++ if (!desc)
++ return NULL;
++
++ for (i = 0; i < num_periods; i++) {
++ desc->sg[i].addr = buf_addr;
++ desc->sg[i].len = period_len;
++ buf_addr += period_len;
++ }
++
++ desc->num_sgs = num_periods;
++ desc->direction = direction;
++ desc->cyclic = true;
++
++ return vchan_tx_prep(&chan->vchan, &desc->vdesc, flags);
++}
++
++static size_t gdma_dma_desc_residue(struct gdma_dmaengine_chan *chan,
++ struct gdma_dma_desc *desc, unsigned int next_sg)
++{
++ struct gdma_dma_dev *dma_dev = gdma_dma_chan_get_dev(chan);
++ unsigned int residue, count;
++ unsigned int i;
++
++ residue = 0;
++
++ for (i = next_sg; i < desc->num_sgs; i++)
++ residue += desc->sg[i].len;
++
++ if (next_sg != 0) {
++ count = gdma_dma_read(dma_dev, GDMA_REG_CTRL0(chan->id));
++ count >>= GDMA_REG_CTRL0_CURR_SHIFT;
++ count &= GDMA_REG_CTRL0_CURR_MASK;
++ residue += count << chan->transfer_shift;
++ }
++
++ return residue;
++}
++
++static enum dma_status gdma_dma_tx_status(struct dma_chan *c,
++ dma_cookie_t cookie, struct dma_tx_state *state)
++{
++ struct gdma_dmaengine_chan *chan = to_gdma_dma_chan(c);
++ struct virt_dma_desc *vdesc;
++ enum dma_status status;
++ unsigned long flags;
++
++ status = dma_cookie_status(c, cookie, state);
++ if (status == DMA_SUCCESS || !state)
++ return status;
++
++ spin_lock_irqsave(&chan->vchan.lock, flags);
++ vdesc = vchan_find_desc(&chan->vchan, cookie);
++ if (cookie == chan->desc->vdesc.tx.cookie) {
++ state->residue = gdma_dma_desc_residue(chan, chan->desc,
++ chan->next_sg);
++ } else if (vdesc) {
++ state->residue = gdma_dma_desc_residue(chan,
++ to_gdma_dma_desc(vdesc), 0);
++ } else {
++ state->residue = 0;
++ }
++ spin_unlock_irqrestore(&chan->vchan.lock, flags);
++
++ return status;
++}
++
++static int gdma_dma_alloc_chan_resources(struct dma_chan *c)
++{
++ return 0;
++}
++
++static void gdma_dma_free_chan_resources(struct dma_chan *c)
++{
++ vchan_free_chan_resources(to_virt_chan(c));
++}
++
++static void gdma_dma_desc_free(struct virt_dma_desc *vdesc)
++{
++ kfree(container_of(vdesc, struct gdma_dma_desc, vdesc));
++}
++
++static struct dma_chan *
++of_dma_xlate_by_chan_id(struct of_phandle_args *dma_spec,
++ struct of_dma *ofdma)
++{
++ struct gdma_dma_dev *dma_dev = ofdma->of_dma_data;
++ unsigned int request = dma_spec->args[0];
++
++ if (request >= GDMA_NR_CHANS)
++ return NULL;
++
++ return dma_get_slave_channel(&(dma_dev->chan[request].vchan.chan));
++}
++
++static int gdma_dma_probe(struct platform_device *pdev)
++{
++ struct gdma_dmaengine_chan *chan;
++ struct gdma_dma_dev *dma_dev;
++ struct dma_device *dd;
++ unsigned int i;
++ struct resource *res;
++ uint32_t gct;
++ int ret;
++ int irq;
++
++
++ dma_dev = devm_kzalloc(&pdev->dev, sizeof(*dma_dev), GFP_KERNEL);
++ if (!dma_dev)
++ return -EINVAL;
++
++ dd = &dma_dev->ddev;
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ dma_dev->base = devm_ioremap_resource(&pdev->dev, res);
++ if (IS_ERR(dma_dev->base))
++ return PTR_ERR(dma_dev->base);
++
++ dma_cap_set(DMA_SLAVE, dd->cap_mask);
++ dma_cap_set(DMA_CYCLIC, dd->cap_mask);
++ dd->device_alloc_chan_resources = gdma_dma_alloc_chan_resources;
++ dd->device_free_chan_resources = gdma_dma_free_chan_resources;
++ dd->device_tx_status = gdma_dma_tx_status;
++ dd->device_issue_pending = gdma_dma_issue_pending;
++ dd->device_prep_slave_sg = gdma_dma_prep_slave_sg;
++ dd->device_prep_dma_cyclic = gdma_dma_prep_dma_cyclic;
++ dd->device_control = gdma_dma_control;
++ dd->dev = &pdev->dev;
++ dd->chancnt = GDMA_NR_CHANS;
++ INIT_LIST_HEAD(&dd->channels);
++
++ for (i = 0; i < dd->chancnt; i++) {
++ chan = &dma_dev->chan[i];
++ chan->id = i;
++ chan->vchan.desc_free = gdma_dma_desc_free;
++ vchan_init(&chan->vchan, dd);
++ }
++
++ ret = dma_async_device_register(dd);
++ if (ret)
++ return ret;
++
++ ret = of_dma_controller_register(pdev->dev.of_node,
++ of_dma_xlate_by_chan_id, dma_dev);
++ if (ret)
++ goto err_unregister;
++
++ irq = platform_get_irq(pdev, 0);
++ ret = request_irq(irq, gdma_dma_irq, 0, dev_name(&pdev->dev), dma_dev);
++ if (ret)
++ goto err_unregister;
++
++ gdma_dma_write(dma_dev, GDMA_REG_UNMASK_INT, 0);
++ gdma_dma_write(dma_dev, GDMA_REG_DONE_INT, BIT(dd->chancnt) - 1);
++
++ gct = gdma_dma_read(dma_dev, GDMA_REG_GCT);
++ dev_info(&pdev->dev, "revision: %d, channels: %d\n",
++ (gct >> GDMA_REG_GCT_VER_SHIFT) & GDMA_REG_GCT_VER_MASK,
++ 8 << ((gct >> GDMA_REG_GCT_CHAN_SHIFT) & GDMA_REG_GCT_CHAN_MASK));
++ platform_set_drvdata(pdev, dma_dev);
++
++ gdma_dma_write(dma_dev, GDMA_REG_GCT, GDMA_REG_GCT_ARBIT_RR);
++
++ return 0;
++
++err_unregister:
++ dma_async_device_unregister(dd);
++ return ret;
++}
++
++static int gdma_dma_remove(struct platform_device *pdev)
++{
++ struct gdma_dma_dev *dma_dev = platform_get_drvdata(pdev);
++ int irq = platform_get_irq(pdev, 0);
++
++ free_irq(irq, dma_dev);
++ of_dma_controller_free(pdev->dev.of_node);
++ dma_async_device_unregister(&dma_dev->ddev);
++
++ return 0;
++}
++
++static const struct of_device_id gdma_of_match_table[] = {
++ { .compatible = "ralink,rt2880-gdma" },
++ { },
++};
++
++static struct platform_driver gdma_dma_driver = {
++ .probe = gdma_dma_probe,
++ .remove = gdma_dma_remove,
++ .driver = {
++ .name = "gdma-rt2880",
++ .owner = THIS_MODULE,
++ .of_match_table = gdma_of_match_table,
++ },
++};
++module_platform_driver(gdma_dma_driver);
++
++MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
++MODULE_DESCRIPTION("GDMA4740 DMA driver");
++MODULE_LICENSE("GPLv2");
+diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
+index c5c92d5..482131e 100644
+--- a/include/linux/dmaengine.h
++++ b/include/linux/dmaengine.h
+@@ -1072,6 +1072,7 @@ struct dma_chan *dma_request_slave_channel_reason(struct device *dev,
+ const char *name);
+ struct dma_chan *dma_request_slave_channel(struct device *dev, const char *name);
+ void dma_release_channel(struct dma_chan *chan);
++struct dma_chan *dma_get_slave_channel(struct dma_chan *chan);
+ #else
+ static inline struct dma_chan *dma_find_channel(enum dma_transaction_type tx_type)
+ {
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0055-asoc-add-mt7620-support.patch b/target/linux/ramips/patches-3.14/0055-asoc-add-mt7620-support.patch
new file mode 100644
index 0000000000..c1cef33764
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0055-asoc-add-mt7620-support.patch
@@ -0,0 +1,734 @@
+From 241188942603dc73f62cf2553c53cae2235c9957 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 27 Jul 2014 09:31:47 +0100
+Subject: [PATCH 55/57] asoc: add mt7620 support
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/of.c | 2 +
+ sound/soc/Kconfig | 1 +
+ sound/soc/Makefile | 1 +
+ sound/soc/ralink/Kconfig | 15 ++
+ sound/soc/ralink/Makefile | 11 +
+ sound/soc/ralink/mt7620-i2s.c | 466 ++++++++++++++++++++++++++++++++++++++
+ sound/soc/ralink/mt7620-wm8960.c | 125 ++++++++++
+ sound/soc/soc-io.c | 10 -
+ 8 files changed, 621 insertions(+), 10 deletions(-)
+ create mode 100644 sound/soc/ralink/Kconfig
+ create mode 100644 sound/soc/ralink/Makefile
+ create mode 100644 sound/soc/ralink/mt7620-i2s.c
+ create mode 100644 sound/soc/ralink/mt7620-wm8960.c
+
+diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
+index 405b79c..dfda6e6 100644
+--- a/arch/mips/ralink/of.c
++++ b/arch/mips/ralink/of.c
+@@ -15,6 +15,7 @@
+ #include <linux/of_fdt.h>
+ #include <linux/kernel.h>
+ #include <linux/bootmem.h>
++#include <linux/module.h>
+ #include <linux/of_platform.h>
+ #include <linux/of_address.h>
+
+@@ -26,6 +27,7 @@
+ #include "common.h"
+
+ __iomem void *rt_sysc_membase;
++EXPORT_SYMBOL(rt_sysc_membase);
+ __iomem void *rt_memc_membase;
+
+ extern struct boot_param_header __dtb_start;
+diff --git a/sound/soc/Kconfig b/sound/soc/Kconfig
+index d62ce48..de91f58 100644
+--- a/sound/soc/Kconfig
++++ b/sound/soc/Kconfig
+@@ -47,6 +47,7 @@ source "sound/soc/kirkwood/Kconfig"
+ source "sound/soc/intel/Kconfig"
+ source "sound/soc/mxs/Kconfig"
+ source "sound/soc/pxa/Kconfig"
++source "sound/soc/ralink/Kconfig"
+ source "sound/soc/samsung/Kconfig"
+ source "sound/soc/s6000/Kconfig"
+ source "sound/soc/sh/Kconfig"
+diff --git a/sound/soc/Makefile b/sound/soc/Makefile
+index 62a1822..1d9398c 100644
+--- a/sound/soc/Makefile
++++ b/sound/soc/Makefile
+@@ -24,6 +24,7 @@ obj-$(CONFIG_SND_SOC) += nuc900/
+ obj-$(CONFIG_SND_SOC) += omap/
+ obj-$(CONFIG_SND_SOC) += kirkwood/
+ obj-$(CONFIG_SND_SOC) += pxa/
++obj-$(CONFIG_SND_SOC) += ralink/
+ obj-$(CONFIG_SND_SOC) += samsung/
+ obj-$(CONFIG_SND_SOC) += s6000/
+ obj-$(CONFIG_SND_SOC) += sh/
+diff --git a/sound/soc/ralink/Kconfig b/sound/soc/ralink/Kconfig
+new file mode 100644
+index 0000000..d462622
+--- /dev/null
++++ b/sound/soc/ralink/Kconfig
+@@ -0,0 +1,15 @@
++config SND_MT7620_SOC_I2S
++ depends on SOC_MT7620 && SND_SOC
++ select SND_SOC_GENERIC_DMAENGINE_PCM
++ tristate "SoC Audio (I2S protocol) for Ralink MT7620 SoC"
++ help
++ Say Y if you want to use I2S protocol and I2S codec on Ingenic MT7620
++ based boards.
++
++config SND_MT7620_SOC_WM8960
++ tristate "SoC Audio support for Ralink WM8960"
++ select SND_MT7620_SOC_I2S
++ select SND_SOC_WM8960
++ help
++ Say Y if you want to add support for ASoC audio on the Qi LB60 board
++ a.k.a Qi Ben NanoNote.
+diff --git a/sound/soc/ralink/Makefile b/sound/soc/ralink/Makefile
+new file mode 100644
+index 0000000..3d79980
+--- /dev/null
++++ b/sound/soc/ralink/Makefile
+@@ -0,0 +1,11 @@
++#
++# Jz4740 Platform Support
++#
++snd-soc-mt7620-i2s-objs := mt7620-i2s.o
++
++obj-$(CONFIG_SND_MT7620_SOC_I2S) += snd-soc-mt7620-i2s.o
++
++# Jz4740 Machine Support
++snd-soc-mt7620-wm8960-objs := mt7620-wm8960.o
++
++obj-$(CONFIG_SND_MT7620_SOC_WM8960) += snd-soc-mt7620-wm8960.o
+diff --git a/sound/soc/ralink/mt7620-i2s.c b/sound/soc/ralink/mt7620-i2s.c
+new file mode 100644
+index 0000000..846db03
+--- /dev/null
++++ b/sound/soc/ralink/mt7620-i2s.c
+@@ -0,0 +1,466 @@
++/*
++ * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 675 Mass Ave, Cambridge, MA 02139, USA.
++ *
++ */
++
++#include <linux/init.h>
++#include <linux/io.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/slab.h>
++
++#include <linux/delay.h>
++
++#include <linux/dma-mapping.h>
++
++#include <sound/core.h>
++#include <sound/pcm.h>
++#include <sound/pcm_params.h>
++#include <sound/soc.h>
++#include <sound/initval.h>
++#include <sound/dmaengine_pcm.h>
++
++#include <ralink_regs.h>
++
++#define I2S_REG_CFG0 0x00
++#define I2S_REG_CFG0_EN BIT(31)
++#define I2S_REG_CFG0_DMA_EN BIT(30)
++#define I2S_REG_CFG0_BYTE_SWAP BIT(28)
++#define I2S_REG_CFG0_TX_EN BIT(24)
++#define I2S_REG_CFG0_RX_EN BIT(20)
++#define I2S_REG_CFG0_SLAVE BIT(16)
++#define I2S_REG_CFG0_RX_THRES 12
++#define I2S_REG_CFG0_TX_THRES 4
++#define I2S_REG_CFG0_DFT_THRES (4 << I2S_REG_CFG0_RX_THRES) | \
++ (4 << I2S_REG_CFG0_TX_THRES)
++
++#define I2S_REG_INT_STATUS 0x04
++#define I2S_REG_INT_EN 0x08
++#define I2S_REG_FF_STATUS 0x0c
++#define I2S_REG_WREG 0x10
++#define I2S_REG_RREG 0x14
++#define I2S_REG_CFG1 0x18
++
++#define I2S_REG_DIVCMP 0x20
++#define I2S_REG_DIVINT 0x24
++#define I2S_REG_CLK_EN BIT(31)
++
++struct mt7620_i2s {
++ struct resource *mem;
++ void __iomem *base;
++ dma_addr_t phys_base;
++
++ struct snd_dmaengine_dai_dma_data playback_dma_data;
++ struct snd_dmaengine_dai_dma_data capture_dma_data;
++};
++
++static inline uint32_t mt7620_i2s_read(const struct mt7620_i2s *i2s,
++ unsigned int reg)
++{
++ return readl(i2s->base + reg);
++}
++
++static inline void mt7620_i2s_write(const struct mt7620_i2s *i2s,
++ unsigned int reg, uint32_t value)
++{
++ //printk("i2s --> %p = 0x%08X\n", i2s->base + reg, value);
++ writel(value, i2s->base + reg);
++}
++
++static int mt7620_i2s_startup(struct snd_pcm_substream *substream,
++ struct snd_soc_dai *dai)
++{
++ struct mt7620_i2s *i2s = snd_soc_dai_get_drvdata(dai);
++ uint32_t cfg;
++
++ if (dai->active)
++ return 0;
++
++ cfg = mt7620_i2s_read(i2s, I2S_REG_CFG0);
++ cfg |= I2S_REG_CFG0_EN;
++ mt7620_i2s_write(i2s, I2S_REG_CFG0, cfg);
++
++ return 0;
++}
++
++static void mt7620_i2s_shutdown(struct snd_pcm_substream *substream,
++ struct snd_soc_dai *dai)
++{
++ struct mt7620_i2s *i2s = snd_soc_dai_get_drvdata(dai);
++ uint32_t cfg;
++
++ if (dai->active)
++ return;
++
++ cfg = mt7620_i2s_read(i2s, I2S_REG_CFG0);
++ cfg &= ~I2S_REG_CFG0_EN;
++ mt7620_i2s_write(i2s, I2S_REG_CFG0, cfg);
++}
++
++static int mt7620_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
++ struct snd_soc_dai *dai)
++{
++ struct mt7620_i2s *i2s = snd_soc_dai_get_drvdata(dai);
++
++ uint32_t cfg;
++ uint32_t mask;
++
++ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
++ mask = I2S_REG_CFG0_TX_EN;
++ else
++ mask = I2S_REG_CFG0_RX_EN;
++
++ cfg = mt7620_i2s_read(i2s, I2S_REG_CFG0);
++
++ switch (cmd) {
++ case SNDRV_PCM_TRIGGER_START:
++ case SNDRV_PCM_TRIGGER_RESUME:
++ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
++ cfg |= mask;
++ break;
++ case SNDRV_PCM_TRIGGER_STOP:
++ case SNDRV_PCM_TRIGGER_SUSPEND:
++ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
++ cfg &= ~mask;
++ break;
++ default:
++ return -EINVAL;
++ }
++
++ if (cfg & (I2S_REG_CFG0_TX_EN | I2S_REG_CFG0_RX_EN))
++ cfg |= I2S_REG_CFG0_DMA_EN;
++ else
++ cfg &= ~I2S_REG_CFG0_DMA_EN;
++
++ mt7620_i2s_write(i2s, I2S_REG_CFG0, cfg);
++
++ return 0;
++}
++
++static int mt7620_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
++{
++ struct mt7620_i2s *i2s = snd_soc_dai_get_drvdata(dai);
++ uint32_t cfg;
++
++ cfg = mt7620_i2s_read(i2s, I2S_REG_CFG0);
++
++ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
++ case SND_SOC_DAIFMT_CBS_CFS:
++ cfg |= I2S_REG_CFG0_SLAVE;
++ break;
++ case SND_SOC_DAIFMT_CBM_CFM:
++ cfg &= ~I2S_REG_CFG0_SLAVE;
++ break;
++ case SND_SOC_DAIFMT_CBM_CFS:
++ default:
++ return -EINVAL;
++ }
++
++ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
++ case SND_SOC_DAIFMT_I2S:
++ case SND_SOC_DAIFMT_MSB:
++ cfg &= ~I2S_REG_CFG0_BYTE_SWAP;
++ break;
++ case SND_SOC_DAIFMT_LSB:
++ cfg |= I2S_REG_CFG0_BYTE_SWAP;
++ break;
++ default:
++ return -EINVAL;
++ }
++
++ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
++ case SND_SOC_DAIFMT_NB_NF:
++ break;
++ default:
++ return -EINVAL;
++ }
++
++ mt7620_i2s_write(i2s, I2S_REG_CFG0, cfg);
++
++ return 0;
++}
++
++static int mt7620_i2s_hw_params(struct snd_pcm_substream *substream,
++ struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
++{
++
++ return 0;
++}
++
++unsigned long i2sMaster_inclk_int[11] = {
++ 78, 56, 52, 39, 28, 26, 19, 14, 13, 9, 6};
++unsigned long i2sMaster_inclk_comp[11] = {
++ 64, 352, 42, 32, 176, 21, 272, 88, 10, 455, 261};
++
++
++static int mt7620_i2s_set_sysclk(struct snd_soc_dai *dai, int clk_id,
++ unsigned int freq, int dir)
++{
++ struct mt7620_i2s *i2s = snd_soc_dai_get_drvdata(dai);
++
++ printk("Internal REFCLK with fractional division\n");
++
++ mt7620_i2s_write(i2s, I2S_REG_DIVINT, i2sMaster_inclk_int[7]);
++ mt7620_i2s_write(i2s, I2S_REG_DIVCMP,
++ i2sMaster_inclk_comp[7] | I2S_REG_CLK_EN);
++
++/* struct mt7620_i2s *i2s = snd_soc_dai_get_drvdata(dai);
++ struct clk *parent;
++ int ret = 0;
++
++ switch (clk_id) {
++ case JZ4740_I2S_CLKSRC_EXT:
++ parent = clk_get(NULL, "ext");
++ clk_set_parent(i2s->clk_i2s, parent);
++ break;
++ case JZ4740_I2S_CLKSRC_PLL:
++ parent = clk_get(NULL, "pll half");
++ clk_set_parent(i2s->clk_i2s, parent);
++ ret = clk_set_rate(i2s->clk_i2s, freq);
++ break;
++ default:
++ return -EINVAL;
++ }
++ clk_put(parent);
++
++ return ret;*/
++ return 0;
++}
++
++static int mt7620_i2s_suspend(struct snd_soc_dai *dai)
++{
++ struct mt7620_i2s *i2s = snd_soc_dai_get_drvdata(dai);
++ uint32_t cfg;
++
++ if (dai->active) {
++ cfg = mt7620_i2s_read(i2s, I2S_REG_CFG0);
++ cfg &= ~I2S_REG_CFG0_TX_EN;
++ mt7620_i2s_write(i2s, I2S_REG_CFG0, cfg);
++ }
++
++ return 0;
++}
++
++static int mt7620_i2s_resume(struct snd_soc_dai *dai)
++{
++ struct mt7620_i2s *i2s = snd_soc_dai_get_drvdata(dai);
++ uint32_t cfg;
++
++ if (dai->active) {
++ cfg = mt7620_i2s_read(i2s, I2S_REG_CFG0);
++ cfg |= I2S_REG_CFG0_TX_EN;
++ mt7620_i2s_write(i2s, I2S_REG_CFG0, cfg);
++ }
++
++ return 0;
++}
++
++static void mt7620_i2c_init_pcm_config(struct mt7620_i2s *i2s)
++{
++ struct snd_dmaengine_dai_dma_data *dma_data;
++
++ /* Playback */
++ dma_data = &i2s->playback_dma_data;
++ dma_data->maxburst = 16;
++ dma_data->slave_id = 2; //JZ4740_DMA_TYPE_AIC_TRANSMIT;
++ dma_data->addr = i2s->phys_base + I2S_REG_WREG;
++
++ /* Capture */
++ dma_data = &i2s->capture_dma_data;
++ dma_data->maxburst = 16;
++ dma_data->slave_id = 3; //JZ4740_DMA_TYPE_AIC_RECEIVE;
++ dma_data->addr = i2s->phys_base + I2S_REG_RREG;
++}
++
++static int mt7620_i2s_dai_probe(struct snd_soc_dai *dai)
++{
++ struct mt7620_i2s *i2s = snd_soc_dai_get_drvdata(dai);
++ uint32_t data;
++
++ mt7620_i2c_init_pcm_config(i2s);
++ dai->playback_dma_data = &i2s->playback_dma_data;
++ dai->capture_dma_data = &i2s->capture_dma_data;
++
++ /* set share pins to i2s/gpio mode and i2c mode */
++ data = rt_sysc_r32(0x60);
++ data &= 0xFFFFFFE2;
++ data |= 0x00000018;
++ rt_sysc_w32(data, 0x60);
++
++ printk("Internal REFCLK with fractional division\n");
++
++ mt7620_i2s_write(i2s, I2S_REG_CFG0, I2S_REG_CFG0_DFT_THRES);
++ mt7620_i2s_write(i2s, I2S_REG_CFG1, 0);
++ mt7620_i2s_write(i2s, I2S_REG_INT_EN, 0);
++
++ mt7620_i2s_write(i2s, I2S_REG_DIVINT, i2sMaster_inclk_int[7]);
++ mt7620_i2s_write(i2s, I2S_REG_DIVCMP,
++ i2sMaster_inclk_comp[7] | I2S_REG_CLK_EN);
++
++ return 0;
++}
++
++static int mt7620_i2s_dai_remove(struct snd_soc_dai *dai)
++{
++ return 0;
++}
++
++static const struct snd_soc_dai_ops mt7620_i2s_dai_ops = {
++ .startup = mt7620_i2s_startup,
++ .shutdown = mt7620_i2s_shutdown,
++ .trigger = mt7620_i2s_trigger,
++ .hw_params = mt7620_i2s_hw_params,
++ .set_fmt = mt7620_i2s_set_fmt,
++ .set_sysclk = mt7620_i2s_set_sysclk,
++};
++
++#define JZ4740_I2S_FMTS (SNDRV_PCM_FMTBIT_S8 | \
++ SNDRV_PCM_FMTBIT_S16_LE)
++
++static struct snd_soc_dai_driver mt7620_i2s_dai = {
++ .probe = mt7620_i2s_dai_probe,
++ .remove = mt7620_i2s_dai_remove,
++ .playback = {
++ .channels_min = 1,
++ .channels_max = 2,
++ .rates = SNDRV_PCM_RATE_8000_48000,
++ .formats = JZ4740_I2S_FMTS,
++ },
++ .capture = {
++ .channels_min = 2,
++ .channels_max = 2,
++ .rates = SNDRV_PCM_RATE_8000_48000,
++ .formats = JZ4740_I2S_FMTS,
++ },
++ .symmetric_rates = 1,
++ .ops = &mt7620_i2s_dai_ops,
++ .suspend = mt7620_i2s_suspend,
++ .resume = mt7620_i2s_resume,
++};
++
++static const struct snd_pcm_hardware mt7620_pcm_hardware = {
++ .info = SNDRV_PCM_INFO_MMAP |
++ SNDRV_PCM_INFO_MMAP_VALID |
++ SNDRV_PCM_INFO_INTERLEAVED |
++ SNDRV_PCM_INFO_BLOCK_TRANSFER,
++ .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S8,
++ .period_bytes_min = PAGE_SIZE,
++ .period_bytes_max = 64 * 1024,
++ .periods_min = 2,
++ .periods_max = 128,
++ .buffer_bytes_max = 128 * 1024,
++ .fifo_size = 32,
++};
++
++static const struct snd_dmaengine_pcm_config mt7620_dmaengine_pcm_config = {
++ .prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config,
++ .pcm_hardware = &mt7620_pcm_hardware,
++ .prealloc_buffer_size = 256 * PAGE_SIZE,
++};
++
++static const struct snd_soc_component_driver mt7620_i2s_component = {
++ .name = "mt7620-i2s",
++};
++
++static int mt7620_i2s_dev_probe(struct platform_device *pdev)
++{
++ struct mt7620_i2s *i2s;
++ int ret;
++
++ snd_dmaengine_pcm_register(&pdev->dev,
++ &mt7620_dmaengine_pcm_config,
++ SND_DMAENGINE_PCM_FLAG_COMPAT);
++
++ i2s = kzalloc(sizeof(*i2s), GFP_KERNEL);
++ if (!i2s)
++ return -ENOMEM;
++
++ i2s->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!i2s->mem) {
++ ret = -ENOENT;
++ goto err_free;
++ }
++
++ i2s->mem = request_mem_region(i2s->mem->start, resource_size(i2s->mem),
++ pdev->name);
++ if (!i2s->mem) {
++ ret = -EBUSY;
++ goto err_free;
++ }
++
++ i2s->base = ioremap_nocache(i2s->mem->start, resource_size(i2s->mem));
++ if (!i2s->base) {
++ ret = -EBUSY;
++ goto err_release_mem_region;
++ }
++
++ i2s->phys_base = i2s->mem->start;
++
++ platform_set_drvdata(pdev, i2s);
++ ret = snd_soc_register_component(&pdev->dev, &mt7620_i2s_component,
++ &mt7620_i2s_dai, 1);
++
++ if (!ret) {
++ dev_err(&pdev->dev, "loaded\n");
++ return ret;
++ }
++
++ dev_err(&pdev->dev, "Failed to register DAI\n");
++ iounmap(i2s->base);
++
++err_release_mem_region:
++ release_mem_region(i2s->mem->start, resource_size(i2s->mem));
++err_free:
++ kfree(i2s);
++
++ return ret;
++}
++
++static int mt7620_i2s_dev_remove(struct platform_device *pdev)
++{
++ struct mt7620_i2s *i2s = platform_get_drvdata(pdev);
++
++ snd_soc_unregister_component(&pdev->dev);
++
++ iounmap(i2s->base);
++ release_mem_region(i2s->mem->start, resource_size(i2s->mem));
++
++ kfree(i2s);
++
++ snd_dmaengine_pcm_unregister(&pdev->dev);
++
++ return 0;
++}
++
++static const struct of_device_id mt7620_i2s_match[] = {
++ { .compatible = "ralink,mt7620a-i2s" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, mt7620_i2s_match);
++
++static struct platform_driver mt7620_i2s_driver = {
++ .probe = mt7620_i2s_dev_probe,
++ .remove = mt7620_i2s_dev_remove,
++ .driver = {
++ .name = "mt7620-i2s",
++ .owner = THIS_MODULE,
++ .of_match_table = mt7620_i2s_match,
++ },
++};
++
++module_platform_driver(mt7620_i2s_driver);
++
++MODULE_AUTHOR("Lars-Peter Clausen, <lars@metafoo.de>");
++MODULE_DESCRIPTION("Ingenic JZ4740 SoC I2S driver");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:mt7620-i2s");
+diff --git a/sound/soc/ralink/mt7620-wm8960.c b/sound/soc/ralink/mt7620-wm8960.c
+new file mode 100644
+index 0000000..c0f6389
+--- /dev/null
++++ b/sound/soc/ralink/mt7620-wm8960.c
+@@ -0,0 +1,125 @@
++/*
++ * Copyright (C) 2009, Lars-Peter Clausen <lars@metafoo.de>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 675 Mass Ave, Cambridge, MA 02139, USA.
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/of.h>
++#include <linux/timer.h>
++#include <linux/interrupt.h>
++#include <linux/platform_device.h>
++#include <sound/core.h>
++#include <sound/pcm.h>
++#include <sound/soc.h>
++
++
++static const struct snd_soc_dapm_widget mt7620_wm8960_widgets[] = {
++ SND_SOC_DAPM_SPK("Speaker", NULL),
++};
++
++static const struct snd_soc_dapm_route mt7620_wm8960_routes[] = {
++ {"Speaker", NULL, "HP_L"},
++ {"Speaker", NULL, "HP_R"},
++};
++
++#define MT7620_DAIFMT (SND_SOC_DAIFMT_I2S | \
++ SND_SOC_DAIFMT_NB_NF | \
++ SND_SOC_DAIFMT_CBM_CFM)
++
++static int mt7620_wm8960_codec_init(struct snd_soc_pcm_runtime *rtd)
++{
++ struct snd_soc_codec *codec = rtd->codec;
++ struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
++ struct snd_soc_dapm_context *dapm = &codec->dapm;
++ int ret;
++
++ snd_soc_dapm_enable_pin(dapm, "HP_L");
++ snd_soc_dapm_enable_pin(dapm, "HP_R");
++
++ ret = snd_soc_dai_set_fmt(cpu_dai, MT7620_DAIFMT);
++ if (ret < 0) {
++ dev_err(codec->dev, "Failed to set cpu dai format: %d\n", ret);
++ return ret;
++ }
++
++ return 0;
++}
++
++static struct snd_soc_dai_link mt7620_wm8960_dai = {
++ .name = "mt7620",
++ .stream_name = "mt7620",
++ .init = mt7620_wm8960_codec_init,
++ .codec_dai_name = "wm8960-hifi",
++};
++
++static struct snd_soc_card mt7620_wm8960 = {
++ .name = "mt7620-wm8960",
++ .owner = THIS_MODULE,
++ .dai_link = &mt7620_wm8960_dai,
++ .num_links = 1,
++
++ .dapm_widgets = mt7620_wm8960_widgets,
++ .num_dapm_widgets = ARRAY_SIZE(mt7620_wm8960_widgets),
++ .dapm_routes = mt7620_wm8960_routes,
++ .num_dapm_routes = ARRAY_SIZE(mt7620_wm8960_routes),
++};
++
++static int mt7620_wm8960_probe(struct platform_device *pdev)
++{
++ struct device_node *np = pdev->dev.of_node;
++ struct snd_soc_card *card = &mt7620_wm8960;
++ int ret;
++
++ card->dev = &pdev->dev;
++
++ mt7620_wm8960_dai.cpu_of_node = of_parse_phandle(np, "cpu-dai", 0);
++ mt7620_wm8960_dai.codec_of_node = of_parse_phandle(np, "codec-dai", 0);
++ mt7620_wm8960_dai.platform_of_node = mt7620_wm8960_dai.cpu_of_node;
++
++ ret = snd_soc_register_card(card);
++ if (ret) {
++ dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n",
++ ret);
++ }
++ return ret;
++}
++
++static int mt7620_wm8960_remove(struct platform_device *pdev)
++{
++ struct snd_soc_card *card = platform_get_drvdata(pdev);
++
++ snd_soc_unregister_card(card);
++ return 0;
++}
++
++static const struct of_device_id mt7620_audio_match[] = {
++ { .compatible = "ralink,wm8960-audio" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, mt7620_audio_match);
++
++static struct platform_driver mt7620_wm8960_driver = {
++ .driver = {
++ .name = "wm8960-audio",
++ .owner = THIS_MODULE,
++ .of_match_table = mt7620_audio_match,
++ },
++ .probe = mt7620_wm8960_probe,
++ .remove = mt7620_wm8960_remove,
++};
++
++module_platform_driver(mt7620_wm8960_driver);
++
++MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
++MODULE_DESCRIPTION("ALSA SoC QI LB60 Audio support");
++MODULE_LICENSE("GPL v2");
++MODULE_ALIAS("platform:qi-lb60-audio");
+diff --git a/sound/soc/soc-io.c b/sound/soc/soc-io.c
+index aa886cc..3fdc8c8 100644
+--- a/sound/soc/soc-io.c
++++ b/sound/soc/soc-io.c
+@@ -19,7 +19,6 @@
+
+ #include <trace/events/asoc.h>
+
+-#ifdef CONFIG_REGMAP
+ static int hw_write(struct snd_soc_codec *codec, unsigned int reg,
+ unsigned int value)
+ {
+@@ -135,12 +134,3 @@ int snd_soc_codec_set_cache_io(struct snd_soc_codec *codec,
+ return PTR_ERR_OR_ZERO(codec->control_data);
+ }
+ EXPORT_SYMBOL_GPL(snd_soc_codec_set_cache_io);
+-#else
+-int snd_soc_codec_set_cache_io(struct snd_soc_codec *codec,
+- int addr_bits, int data_bits,
+- enum snd_soc_control_type control)
+-{
+- return -ENOTSUPP;
+-}
+-EXPORT_SYMBOL_GPL(snd_soc_codec_set_cache_io);
+-#endif
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0056-watchdog-add-MT7621-support.patch b/target/linux/ramips/patches-3.14/0056-watchdog-add-MT7621-support.patch
new file mode 100644
index 0000000000..5ddbcd5e50
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0056-watchdog-add-MT7621-support.patch
@@ -0,0 +1,237 @@
+From 6a42dd698ddf91b6e9902b17e21dc13c6ae412ff Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 16 Mar 2014 05:24:42 +0000
+Subject: [PATCH 56/57] watchdog: add MT7621 support
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/watchdog/Kconfig | 7 ++
+ drivers/watchdog/Makefile | 1 +
+ drivers/watchdog/mt7621_wdt.c | 185 +++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 193 insertions(+)
+ create mode 100644 drivers/watchdog/mt7621_wdt.c
+
+diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
+index 79d2589..40f4e5d 100644
+--- a/drivers/watchdog/Kconfig
++++ b/drivers/watchdog/Kconfig
+@@ -1193,6 +1193,13 @@ config RALINK_WDT
+ help
+ Hardware driver for the Ralink SoC Watchdog Timer.
+
++config MT7621_WDT
++ tristate "Mediatek SoC watchdog"
++ select WATCHDOG_CORE
++ depends on SOC_MT7620 || SOC_MT7621
++ help
++ Hardware driver for the Ralink SoC Watchdog Timer.
++
+ # PARISC Architecture
+
+ # POWERPC Architecture
+diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
+index 985a66c..bbd5d0d 100644
+--- a/drivers/watchdog/Makefile
++++ b/drivers/watchdog/Makefile
+@@ -138,6 +138,7 @@ obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
+ octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
+ obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o
+ obj-$(CONFIG_RALINK_WDT) += rt2880_wdt.o
++obj-$(CONFIG_MT7621_WDT) += mt7621_wdt.o
+
+ # PARISC Architecture
+
+diff --git a/drivers/watchdog/mt7621_wdt.c b/drivers/watchdog/mt7621_wdt.c
+new file mode 100644
+index 0000000..29f55c2
+--- /dev/null
++++ b/drivers/watchdog/mt7621_wdt.c
+@@ -0,0 +1,185 @@
++/*
++ * Ralink RT288x/RT3xxx/MT76xx built-in hardware watchdog timer
++ *
++ * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
++ *
++ * This driver was based on: drivers/watchdog/softdog.c
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/clk.h>
++#include <linux/reset.h>
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/watchdog.h>
++#include <linux/miscdevice.h>
++#include <linux/moduleparam.h>
++#include <linux/platform_device.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#define SYSC_RSTSTAT 0x38
++#define WDT_RST_CAUSE BIT(1)
++
++#define RALINK_WDT_TIMEOUT 30
++
++#define TIMER_REG_TMRSTAT 0x00
++#define TIMER_REG_TMR1LOAD 0x24
++#define TIMER_REG_TMR1CTL 0x20
++
++#define TMR1CTL_ENABLE BIT(7)
++#define TMR1CTL_RESTART BIT(9)
++
++static void __iomem *mt762x_wdt_base;
++
++static bool nowayout = WATCHDOG_NOWAYOUT;
++module_param(nowayout, bool, 0);
++MODULE_PARM_DESC(nowayout,
++ "Watchdog cannot be stopped once started (default="
++ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
++
++static inline void rt_wdt_w32(unsigned reg, u32 val)
++{
++ iowrite32(val, mt762x_wdt_base + reg);
++}
++
++static inline u32 rt_wdt_r32(unsigned reg)
++{
++ return ioread32(mt762x_wdt_base + reg);
++}
++
++static int mt762x_wdt_ping(struct watchdog_device *w)
++{
++ rt_wdt_w32(TIMER_REG_TMRSTAT, TMR1CTL_RESTART);
++
++ return 0;
++}
++
++static int mt762x_wdt_set_timeout(struct watchdog_device *w, unsigned int t)
++{
++ w->timeout = t;
++ rt_wdt_w32(TIMER_REG_TMR1LOAD, t * 1000);
++ mt762x_wdt_ping(w);
++
++ return 0;
++}
++
++static int mt762x_wdt_start(struct watchdog_device *w)
++{
++ u32 t;
++
++ rt_wdt_w32(TIMER_REG_TMR1CTL, 1000 << 16);
++ mt762x_wdt_set_timeout(w, w->timeout);
++
++ t = rt_wdt_r32(TIMER_REG_TMR1CTL);
++ t |= TMR1CTL_ENABLE;
++ rt_wdt_w32(TIMER_REG_TMR1CTL, t);
++
++ return 0;
++}
++
++static int mt762x_wdt_stop(struct watchdog_device *w)
++{
++ u32 t;
++
++ mt762x_wdt_ping(w);
++
++ t = rt_wdt_r32(TIMER_REG_TMR1CTL);
++ t &= ~TMR1CTL_ENABLE;
++ rt_wdt_w32(TIMER_REG_TMR1CTL, t);
++
++ return 0;
++}
++
++static int mt762x_wdt_bootcause(void)
++{
++ if (rt_sysc_r32(SYSC_RSTSTAT) & WDT_RST_CAUSE)
++ return WDIOF_CARDRESET;
++
++ return 0;
++}
++
++static struct watchdog_info mt762x_wdt_info = {
++ .identity = "Mediatek Watchdog",
++ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
++};
++
++static struct watchdog_ops mt762x_wdt_ops = {
++ .owner = THIS_MODULE,
++ .start = mt762x_wdt_start,
++ .stop = mt762x_wdt_stop,
++ .ping = mt762x_wdt_ping,
++ .set_timeout = mt762x_wdt_set_timeout,
++};
++
++static struct watchdog_device mt762x_wdt_dev = {
++ .info = &mt762x_wdt_info,
++ .ops = &mt762x_wdt_ops,
++ .min_timeout = 1,
++};
++
++static int mt762x_wdt_probe(struct platform_device *pdev)
++{
++ struct resource *res;
++ int ret;
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ mt762x_wdt_base = devm_request_and_ioremap(&pdev->dev, res);
++ if (IS_ERR(mt762x_wdt_base))
++ return PTR_ERR(mt762x_wdt_base);
++
++ device_reset(&pdev->dev);
++
++ mt762x_wdt_dev.dev = &pdev->dev;
++ mt762x_wdt_dev.bootstatus = mt762x_wdt_bootcause();
++ mt762x_wdt_dev.max_timeout = (0xfffful / 1000);
++ mt762x_wdt_dev.timeout = mt762x_wdt_dev.max_timeout;
++
++ watchdog_set_nowayout(&mt762x_wdt_dev, nowayout);
++
++ ret = watchdog_register_device(&mt762x_wdt_dev);
++ if (!ret)
++ dev_info(&pdev->dev, "Initialized\n");
++
++ return 0;
++}
++
++static int mt762x_wdt_remove(struct platform_device *pdev)
++{
++ watchdog_unregister_device(&mt762x_wdt_dev);
++
++ return 0;
++}
++
++static void mt762x_wdt_shutdown(struct platform_device *pdev)
++{
++ mt762x_wdt_stop(&mt762x_wdt_dev);
++}
++
++static const struct of_device_id mt762x_wdt_match[] = {
++ { .compatible = "mtk,mt7621-wdt" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, mt762x_wdt_match);
++
++static struct platform_driver mt762x_wdt_driver = {
++ .probe = mt762x_wdt_probe,
++ .remove = mt762x_wdt_remove,
++ .shutdown = mt762x_wdt_shutdown,
++ .driver = {
++ .name = KBUILD_MODNAME,
++ .owner = THIS_MODULE,
++ .of_match_table = mt762x_wdt_match,
++ },
++};
++
++module_platform_driver(mt762x_wdt_driver);
++
++MODULE_DESCRIPTION("MediaTek MT762x hardware watchdog driver");
++MODULE_AUTHOR("John Crispin <blogic@openwrt.org");
++MODULE_LICENSE("GPL v2");
++MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0057-uvc-add-iPassion-iP2970-support.patch b/target/linux/ramips/patches-3.14/0057-uvc-add-iPassion-iP2970-support.patch
new file mode 100644
index 0000000000..89e46b904d
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0057-uvc-add-iPassion-iP2970-support.patch
@@ -0,0 +1,257 @@
+From 0d3e92b4d3e2160873b610aabd46bbc4853ff82e Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 19 Sep 2013 01:50:59 +0200
+Subject: [PATCH 57/57] uvc: add iPassion iP2970 support
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/media/usb/uvc/uvc_driver.c | 14 ++++
+ drivers/media/usb/uvc/uvc_status.c | 2 +
+ drivers/media/usb/uvc/uvc_video.c | 147 ++++++++++++++++++++++++++++++++++++
+ drivers/media/usb/uvc/uvcvideo.h | 3 +
+ 4 files changed, 166 insertions(+)
+
+diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c
+index c3bb250..c6612d4 100644
+--- a/drivers/media/usb/uvc/uvc_driver.c
++++ b/drivers/media/usb/uvc/uvc_driver.c
+@@ -2467,6 +2467,20 @@ static struct usb_device_id uvc_ids[] = {
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_PROBE_MINMAX
+ | UVC_QUIRK_IGNORE_SELECTOR_UNIT },
++
++/* iPassion iP2970 */
++ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
++ | USB_DEVICE_ID_MATCH_INT_INFO,
++ .idVendor = 0x1B3B,
++ .idProduct = 0x2970,
++ .bInterfaceClass = USB_CLASS_VIDEO,
++ .bInterfaceSubClass = 1,
++ .bInterfaceProtocol = 0,
++ .driver_info = UVC_QUIRK_PROBE_MINMAX
++ | UVC_QUIRK_STREAM_NO_FID
++ | UVC_QUIRK_MOTION
++ | UVC_QUIRK_SINGLE_ISO },
++
+ /* Generic USB Video Class */
+ { USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, 0) },
+ {}
+diff --git a/drivers/media/usb/uvc/uvc_status.c b/drivers/media/usb/uvc/uvc_status.c
+index f552ab9..7132ad4 100644
+--- a/drivers/media/usb/uvc/uvc_status.c
++++ b/drivers/media/usb/uvc/uvc_status.c
+@@ -139,6 +139,7 @@ static void uvc_status_complete(struct urb *urb)
+ switch (dev->status[0] & 0x0f) {
+ case UVC_STATUS_TYPE_CONTROL:
+ uvc_event_control(dev, dev->status, len);
++ dev->motion = 1;
+ break;
+
+ case UVC_STATUS_TYPE_STREAMING:
+@@ -182,6 +183,7 @@ int uvc_status_init(struct uvc_device *dev)
+ }
+
+ pipe = usb_rcvintpipe(dev->udev, ep->desc.bEndpointAddress);
++ dev->motion = 0;
+
+ /* For high-speed interrupt endpoints, the bInterval value is used as
+ * an exponent of two. Some developers forgot about it.
+diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c
+index 898c208..2e06163 100644
+--- a/drivers/media/usb/uvc/uvc_video.c
++++ b/drivers/media/usb/uvc/uvc_video.c
+@@ -21,6 +21,11 @@
+ #include <linux/wait.h>
+ #include <linux/atomic.h>
+ #include <asm/unaligned.h>
++#include <linux/skbuff.h>
++#include <linux/kobject.h>
++#include <linux/netlink.h>
++#include <linux/kobject.h>
++#include <linux/workqueue.h>
+
+ #include <media/v4l2-common.h>
+
+@@ -1075,9 +1080,149 @@ static void uvc_video_decode_data(struct uvc_streaming *stream,
+ }
+ }
+
++struct bh_priv {
++ unsigned long seen;
++};
++
++struct bh_event {
++ const char *name;
++ struct sk_buff *skb;
++ struct work_struct work;
++};
++
++#define BH_ERR(fmt, args...) printk(KERN_ERR "%s: " fmt, "webcam", ##args )
++#define BH_DBG(fmt, args...) do {} while (0)
++#define BH_SKB_SIZE 2048
++
++extern u64 uevent_next_seqnum(void);
++static int seen = 0;
++
++static int bh_event_add_var(struct bh_event *event, int argv,
++ const char *format, ...)
++{
++ static char buf[128];
++ char *s;
++ va_list args;
++ int len;
++
++ if (argv)
++ return 0;
++
++ va_start(args, format);
++ len = vsnprintf(buf, sizeof(buf), format, args);
++ va_end(args);
++
++ if (len >= sizeof(buf)) {
++ BH_ERR("buffer size too small\n");
++ WARN_ON(1);
++ return -ENOMEM;
++ }
++
++ s = skb_put(event->skb, len + 1);
++ strcpy(s, buf);
++
++ BH_DBG("added variable '%s'\n", s);
++
++ return 0;
++}
++
++static int motion_hotplug_fill_event(struct bh_event *event)
++{
++ int s = jiffies;
++ int ret;
++
++ if (!seen)
++ seen = jiffies;
++
++ ret = bh_event_add_var(event, 0, "HOME=%s", "/");
++ if (ret)
++ return ret;
++
++ ret = bh_event_add_var(event, 0, "PATH=%s",
++ "/sbin:/bin:/usr/sbin:/usr/bin");
++ if (ret)
++ return ret;
++
++ ret = bh_event_add_var(event, 0, "SUBSYSTEM=usb");
++ if (ret)
++ return ret;
++
++ ret = bh_event_add_var(event, 0, "ACTION=motion");
++ if (ret)
++ return ret;
++
++ ret = bh_event_add_var(event, 0, "SEEN=%d", s - seen);
++ if (ret)
++ return ret;
++ seen = s;
++
++ ret = bh_event_add_var(event, 0, "SEQNUM=%llu", uevent_next_seqnum());
++
++ return ret;
++}
++
++static void motion_hotplug_work(struct work_struct *work)
++{
++ struct bh_event *event = container_of(work, struct bh_event, work);
++ int ret = 0;
++
++ event->skb = alloc_skb(BH_SKB_SIZE, GFP_KERNEL);
++ if (!event->skb)
++ goto out_free_event;
++
++ ret = bh_event_add_var(event, 0, "%s@", "add");
++ if (ret)
++ goto out_free_skb;
++
++ ret = motion_hotplug_fill_event(event);
++ if (ret)
++ goto out_free_skb;
++
++ NETLINK_CB(event->skb).dst_group = 1;
++ broadcast_uevent(event->skb, 0, 1, GFP_KERNEL);
++
++out_free_skb:
++ if (ret) {
++ BH_ERR("work error %d\n", ret);
++ kfree_skb(event->skb);
++ }
++out_free_event:
++ kfree(event);
++}
++
++static int motion_hotplug_create_event(void)
++{
++ struct bh_event *event;
++
++ event = kzalloc(sizeof(*event), GFP_KERNEL);
++ if (!event)
++ return -ENOMEM;
++
++ event->name = "motion";
++
++ INIT_WORK(&event->work, (void *)(void *)motion_hotplug_work);
++ schedule_work(&event->work);
++
++ return 0;
++}
++
++#define MOTION_FLAG_OFFSET 4
+ static void uvc_video_decode_end(struct uvc_streaming *stream,
+ struct uvc_buffer *buf, const __u8 *data, int len)
+ {
++ if ((stream->dev->quirks & UVC_QUIRK_MOTION) &&
++ (data[len - 2] == 0xff) && (data[len - 1] == 0xd9)) {
++ u8 *mem;
++ buf->state = UVC_BUF_STATE_READY;
++ mem = (u8 *) (buf->mem + MOTION_FLAG_OFFSET);
++ if ( stream->dev->motion ) {
++ stream->dev->motion = 0;
++ motion_hotplug_create_event();
++ } else {
++ *mem &= 0x7f;
++ }
++ }
++
+ /* Mark the buffer as done if the EOF marker is set. */
+ if (data[1] & UVC_STREAM_EOF && buf->bytesused != 0) {
+ uvc_trace(UVC_TRACE_FRAME, "Frame complete (EOF found).\n");
+@@ -1478,6 +1623,8 @@ static int uvc_init_video_isoc(struct uvc_streaming *stream,
+ if (npackets == 0)
+ return -ENOMEM;
+
++ if (stream->dev->quirks & UVC_QUIRK_SINGLE_ISO)
++ npackets = 1;
+ size = npackets * psize;
+
+ for (i = 0; i < UVC_URBS; ++i) {
+diff --git a/drivers/media/usb/uvc/uvcvideo.h b/drivers/media/usb/uvc/uvcvideo.h
+index 9e35982..3cacdfd 100644
+--- a/drivers/media/usb/uvc/uvcvideo.h
++++ b/drivers/media/usb/uvc/uvcvideo.h
+@@ -137,6 +137,8 @@
+ #define UVC_QUIRK_FIX_BANDWIDTH 0x00000080
+ #define UVC_QUIRK_PROBE_DEF 0x00000100
+ #define UVC_QUIRK_RESTRICT_FRAME_RATE 0x00000200
++#define UVC_QUIRK_MOTION 0x00000400
++#define UVC_QUIRK_SINGLE_ISO 0x00000800
+
+ /* Format flags */
+ #define UVC_FMT_FLAG_COMPRESSED 0x00000001
+@@ -539,6 +541,7 @@ struct uvc_device {
+ __u8 *status;
+ struct input_dev *input;
+ char input_phys[64];
++ int motion;
+ };
+
+ enum uvc_handle_state {
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.14/0100-mtd-split-remove-padding.patch b/target/linux/ramips/patches-3.14/0100-mtd-split-remove-padding.patch
new file mode 100644
index 0000000000..9c5a728995
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0100-mtd-split-remove-padding.patch
@@ -0,0 +1,13 @@
+--- a/drivers/mtd/mtdpart.c
++++ b/drivers/mtd/mtdpart.c
+@@ -805,10 +805,6 @@ static void split_uimage(struct mtd_info
+ return;
+
+ len = be32_to_cpu(hdr.size) + 0x40;
+- len = mtd_pad_erasesize(master, part->offset, len);
+- if (len + master->erasesize > part->mtd.size)
+- return;
+-
+ __mtd_add_partition(master, "rootfs", part->offset + len,
+ part->mtd.size - len, false);
+ }
diff --git a/target/linux/ramips/patches-3.14/0101-mtd-add-rtn56u-support.patch b/target/linux/ramips/patches-3.14/0101-mtd-add-rtn56u-support.patch
new file mode 100644
index 0000000000..f48c7cbf97
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0101-mtd-add-rtn56u-support.patch
@@ -0,0 +1,28 @@
+--- a/drivers/mtd/mtdpart.c
++++ b/drivers/mtd/mtdpart.c
+@@ -793,8 +793,11 @@ static void split_uimage(struct mtd_info
+ {
+ struct {
+ __be32 magic;
+- __be32 pad[2];
++ __be32 pad0[2];
+ __be32 size;
++ __be32 pad1[4];
++ __be32 name[7];
++ __be32 kern_size;
+ } hdr;
+ size_t len;
+
+@@ -804,7 +807,11 @@ static void split_uimage(struct mtd_info
+ if (len != sizeof(hdr) || hdr.magic != cpu_to_be32(UBOOT_MAGIC))
+ return;
+
+- len = be32_to_cpu(hdr.size) + 0x40;
++ if (hdr.kern_size != 0 && hdr.name[0] == 0)
++ len = be32_to_cpu(hdr.kern_size);
++ else
++ len = be32_to_cpu(hdr.size) + 0x40;
++
+ __mtd_add_partition(master, "rootfs", part->offset + len,
+ part->mtd.size - len, false);
+ }
diff --git a/target/linux/ramips/patches-3.14/0103-MIPS-OWRTDTB.patch b/target/linux/ramips/patches-3.14/0103-MIPS-OWRTDTB.patch
new file mode 100644
index 0000000000..1a00dc2dd8
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0103-MIPS-OWRTDTB.patch
@@ -0,0 +1,52 @@
+From c174d2250e402399ad7dbdd57d51883d8804bba0 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 15 Jul 2013 00:40:37 +0200
+Subject: [PATCH 31/33] owrt: MIPS: add OWRTDTB secion
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/kernel/head.S | 3 +++
+ arch/mips/ralink/Makefile | 2 +-
+ arch/mips/ralink/of.c | 4 +++-
+ 3 files changed, 7 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/kernel/head.S
++++ b/arch/mips/kernel/head.S
+@@ -146,6 +146,9 @@ EXPORT(__image_cmdline)
+ .fill 0x400
+ #endif /* CONFIG_IMAGE_CMDLINE_HACK */
+
++ .ascii "OWRTDTB:"
++ EXPORT(__image_dtb)
++ .fill 0x4000
+ __REF
+
+ NESTED(kernel_entry, 16, sp) # kernel entry point
+--- a/arch/mips/ralink/Makefile
++++ b/arch/mips/ralink/Makefile
+@@ -26,4 +26,4 @@ obj-$(CONFIG_EARLY_PRINTK) += early_prin
+
+ obj-$(CONFIG_DEBUG_FS) += bootrom.o
+
+-obj-y += dts/
++#obj-y += dts/
+--- a/arch/mips/ralink/of.c
++++ b/arch/mips/ralink/of.c
+@@ -90,6 +90,8 @@ static int __init early_init_dt_find_mem
+ return 0;
+ }
+
++extern struct boot_param_header __image_dtb;
++
+ void __init plat_mem_setup(void)
+ {
+ set_io_port_base(KSEG1);
+@@ -98,7 +100,7 @@ void __init plat_mem_setup(void)
+ * Load the builtin devicetree. This causes the chosen node to be
+ * parsed resulting in our memory appearing
+ */
+- __dt_setup_arch(&__dtb_start);
++ __dt_setup_arch(&__image_dtb);
+
+ of_scan_flat_dt(early_init_dt_find_memory, NULL);
+ if (memory_dtb)
diff --git a/target/linux/ramips/rt288x/config-3.14 b/target/linux/ramips/rt288x/config-3.14
new file mode 100644
index 0000000000..44bb31042a
--- /dev/null
+++ b/target/linux/ramips/rt288x/config-3.14
@@ -0,0 +1,167 @@
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAS_RESET_CONTROLLER=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_CEVT_R4K=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+CONFIG_CPU_GENERIC_DUMP_TLB=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_MIPS32=y
+# CONFIG_CPU_MIPS32_R1 is not set
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_CPU_R4K_CACHE_TLB=y
+CONFIG_CPU_R4K_FPU=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CSRC_R4K=y
+CONFIG_DMA_NONCOHERENT=y
+# CONFIG_DTB_RT2880_EVAL is not set
+CONFIG_DTB_RT_NONE=y
+CONFIG_DTC=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_EARLY_PRINTK_8250 is not set
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_NET_UTILS=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_DEVRES=y
+CONFIG_GPIO_RALINK=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_KVM=y
+CONFIG_HAVE_MACH_CLKDEV=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=m
+CONFIG_HZ_PERIODIC=y
+CONFIG_IMAGE_CMDLINE_HACK=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IP17XX_PHY=y
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_CPU=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_INTC=y
+CONFIG_IRQ_WORK=y
+CONFIG_MDIO_BOARDINFO=y
+CONFIG_MIPS=y
+# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=4
+CONFIG_MIPS_L1_CACHE_SHIFT_4=y
+# CONFIG_MIPS_MACHINE is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_O32_FP64_SUPPORT is not set
+CONFIG_MODULES_USE_ELF_REL=y
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_SPLIT_FIRMWARE=y
+CONFIG_MTD_UIMAGE_SPLIT=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_RALINK=y
+CONFIG_NET_RALINK_MDIO=y
+CONFIG_NET_RALINK_MDIO_RT2880=y
+CONFIG_NET_RX_BUSY_POLL=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_MTD=y
+CONFIG_OF_NET=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+# CONFIG_PCI is not set
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYLIB=y
+# CONFIG_PINCONF is not set
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_RT2880=y
+# CONFIG_PINCTRL_SINGLE is not set
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_RALINK=y
+# CONFIG_RALINK_USBPHY is not set
+CONFIG_RALINK_WDT=y
+CONFIG_RA_NAT_NONE=y
+# CONFIG_RCU_STALL_COMMON is not set
+CONFIG_RESET_CONTROLLER=y
+# CONFIG_SCSI_DMA is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RT288X=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SOC_MT7620 is not set
+# CONFIG_SOC_MT7621 is not set
+CONFIG_SOC_RT288X=y
+# CONFIG_SOC_RT305X is not set
+# CONFIG_SOC_RT3883 is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_RT2880=y
+CONFIG_SWCONFIG=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USE_OF=y
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_ZBUD is not set
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/ramips/rt305x/config-3.14 b/target/linux/ramips/rt305x/config-3.14
new file mode 100644
index 0000000000..0f78926132
--- /dev/null
+++ b/target/linux/ramips/rt305x/config-3.14
@@ -0,0 +1,171 @@
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAS_RESET_CONTROLLER=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_CEVT_R4K=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLKEVT_RT3352=y
+CONFIG_CLKSRC_MMIO=y
+CONFIG_CLKSRC_OF=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+CONFIG_CPU_GENERIC_DUMP_TLB=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_MIPS32=y
+# CONFIG_CPU_MIPS32_R1 is not set
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_CPU_R4K_CACHE_TLB=y
+CONFIG_CPU_R4K_FPU=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CSRC_R4K=y
+CONFIG_DEBUG_PINCTRL=y
+CONFIG_DMA_NONCOHERENT=y
+# CONFIG_DTB_RT305X_EVAL is not set
+CONFIG_DTB_RT_NONE=y
+CONFIG_DTC=y
+# CONFIG_DWC_OTG is not set
+CONFIG_EARLY_PRINTK=y
+# CONFIG_EARLY_PRINTK_8250 is not set
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_NET_UTILS=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_DEVRES=y
+CONFIG_GPIO_RALINK=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_KVM=y
+CONFIG_HAVE_MACH_CLKDEV=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HW_RANDOM=m
+CONFIG_HZ_PERIODIC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_CPU=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_INTC=y
+CONFIG_IRQ_WORK=y
+CONFIG_MDIO_BOARDINFO=y
+CONFIG_MIPS=y
+# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+# CONFIG_MIPS_MACHINE is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_O32_FP64_SUPPORT is not set
+CONFIG_MODULES_USE_ELF_REL=y
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_SPLIT_FIRMWARE=y
+CONFIG_MTD_UIMAGE_SPLIT=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_RALINK=y
+CONFIG_NET_RALINK_ESW_RT3052=y
+CONFIG_NET_RX_BUSY_POLL=y
+CONFIG_NLS=m
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_MTD=y
+CONFIG_OF_NET=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYLIB=y
+# CONFIG_PINCONF is not set
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_RT2880=y
+# CONFIG_PINCTRL_SINGLE is not set
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_RALINK=y
+CONFIG_RALINK_USBPHY=y
+CONFIG_RALINK_WDT=y
+CONFIG_RA_NAT_NONE=y
+# CONFIG_RCU_STALL_COMMON is not set
+CONFIG_RESET_CONTROLLER=y
+# CONFIG_SCSI_DMA is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RT288X=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SOC_MT7620 is not set
+# CONFIG_SOC_MT7621 is not set
+# CONFIG_SOC_RT288X is not set
+CONFIG_SOC_RT305X=y
+# CONFIG_SOC_RT3883 is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_RT2880=y
+CONFIG_SWCONFIG=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_USB=m
+CONFIG_USB_COMMON=m
+# CONFIG_USB_EHCI_HCD is not set
+CONFIG_USB_PHY=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USE_OF=y
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_ZBUD is not set
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/ramips/rt3883/config-3.14 b/target/linux/ramips/rt3883/config-3.14
new file mode 100644
index 0000000000..8093abc8e1
--- /dev/null
+++ b/target/linux/ramips/rt3883/config-3.14
@@ -0,0 +1,183 @@
+CONFIG_AR8216_PHY=y
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAS_RESET_CONTROLLER=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_CEVT_R4K=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+CONFIG_CPU_GENERIC_DUMP_TLB=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_MIPS32=y
+# CONFIG_CPU_MIPS32_R1 is not set
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_CPU_R4K_CACHE_TLB=y
+CONFIG_CPU_R4K_FPU=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CSRC_R4K=y
+CONFIG_DEBUG_PINCTRL=y
+CONFIG_DMA_NONCOHERENT=y
+# CONFIG_DTB_RT3883_EVAL is not set
+CONFIG_DTB_RT_NONE=y
+CONFIG_DTC=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_EARLY_PRINTK_8250 is not set
+CONFIG_ETHERNET_PACKET_MANGLE=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_NET_UTILS=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_DEVRES=y
+CONFIG_GPIO_RALINK=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_KVM=y
+CONFIG_HAVE_MACH_CLKDEV=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=m
+CONFIG_HZ_PERIODIC=y
+CONFIG_IMAGE_CMDLINE_HACK=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_CPU=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_INTC=y
+CONFIG_IRQ_WORK=y
+CONFIG_MDIO_BOARDINFO=y
+CONFIG_MIPS=y
+# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+# CONFIG_MIPS_MACHINE is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_O32_FP64_SUPPORT is not set
+# CONFIG_MLX5_CORE is not set
+CONFIG_MODULES_USE_ELF_REL=y
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_SPLIT_FIRMWARE=y
+CONFIG_MTD_SPLIT_SEAMA_FW=y
+CONFIG_MTD_UIMAGE_SPLIT=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_RALINK=y
+CONFIG_NET_RALINK_MDIO=y
+CONFIG_NET_RALINK_MDIO_RT2880=y
+CONFIG_NET_RX_BUSY_POLL=y
+CONFIG_NLS=m
+CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_MTD=y
+CONFIG_OF_NET=y
+CONFIG_OF_PCI=y
+CONFIG_OF_PCI_IRQ=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYLIB=y
+# CONFIG_PINCONF is not set
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_RT2880=y
+# CONFIG_PINCTRL_SINGLE is not set
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_RALINK=y
+CONFIG_RALINK_USBPHY=y
+CONFIG_RALINK_WDT=y
+CONFIG_RA_NAT_NONE=y
+# CONFIG_RCU_STALL_COMMON is not set
+CONFIG_RESET_CONTROLLER=y
+CONFIG_RTL8366_SMI=y
+CONFIG_RTL8367B_PHY=y
+CONFIG_RTL8367_PHY=y
+# CONFIG_SCSI_DMA is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RT288X=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SOC_MT7620 is not set
+# CONFIG_SOC_MT7621 is not set
+# CONFIG_SOC_RT288X is not set
+# CONFIG_SOC_RT305X is not set
+CONFIG_SOC_RT3883=y
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_RT2880=y
+CONFIG_SWCONFIG=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_USB=m
+CONFIG_USB_COMMON=m
+# CONFIG_USB_EHCI_HCD is not set
+CONFIG_USB_PHY=y
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_UHCI_HCD is not set
+CONFIG_USE_OF=y
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_ZBUD is not set
+CONFIG_ZONE_DMA_FLAG=0
--
GitLab