diff --git a/package/iw/Makefile b/package/iw/Makefile
index d1d60c1c6d33b36655f964d75007d42b77c9442b..625e17921be8e89980e7a2b74b9ffaeff73de7dc 100644
--- a/package/iw/Makefile
+++ b/package/iw/Makefile
@@ -8,12 +8,12 @@
include $(TOPDIR)/rules.mk
PKG_NAME:=iw
-PKG_VERSION:=0.9.21
+PKG_VERSION:=0.9.22
PKG_RELEASE:=1
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
PKG_SOURCE_URL:=http://wireless.kernel.org/download/iw/
-PKG_MD5SUM:=726db5f1fd6bc316434414770513ef81
+PKG_MD5SUM:=561c2602c5ce7c65a590118286c0892a
PKG_BUILD_DEPENDS:=mac80211
include $(INCLUDE_DIR)/package.mk
diff --git a/package/iw/patches/001-nl80211_sync.patch b/package/iw/patches/001-nl80211_sync.patch
index 3f01fbf0d4db063f25023d994a611a8e518c6e1f..a385897b75a7c02cdbf2a90c553b5b881112551a 100644
--- a/package/iw/patches/001-nl80211_sync.patch
+++ b/package/iw/patches/001-nl80211_sync.patch
@@ -1,221 +1,81 @@
--- a/nl80211.h
+++ b/nl80211.h
-@@ -295,7 +295,9 @@
- * auth and assoc steps. For this, you need to specify the SSID in a
- * %NL80211_ATTR_SSID attribute, and can optionally specify the association
- * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_MAC,
-- * %NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_CONTROL_PORT.
-+ * %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT,
-+ * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE and
-+ * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT.
- * It is also sent as an event, with the BSSID and response IEs when the
- * connection is established or failed to be established. This can be
- * determined by the STATUS_CODE attribute.
-@@ -313,8 +315,8 @@
- * channel for the specified amount of time. This can be used to do
- * off-channel operations like transmit a Public Action frame and wait for
- * a response while being associated to an AP on another channel.
-- * %NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify which
-- * radio is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the
-+ * %NL80211_ATTR_IFINDEX is used to specify which interface (and thus
-+ * radio) is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the
- * frequency for the operation and %NL80211_ATTR_WIPHY_CHANNEL_TYPE may be
- * optionally used to specify additional channel parameters.
- * %NL80211_ATTR_DURATION is used to specify the duration in milliseconds
-@@ -385,6 +387,8 @@
- * of any other interfaces, and other interfaces will again take
- * precedence when they are used.
+@@ -148,6 +148,10 @@
+ * @NL80211_CMD_SET_MPATH: Set mesh path attributes for mesh path to
+ * destination %NL80211_ATTR_MAC on the interface identified by
+ * %NL80211_ATTR_IFINDEX.
++ * @NL80211_CMD_NEW_MPATH: Create a new mesh path for the destination given by
++ * %NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP.
++ * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by
++ * %NL80211_ATTR_MAC.
+ * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the
+ * the interface identified by %NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC
+@@ -612,7 +616,7 @@ enum nl80211_commands {
+ * consisting of a nested array.
*
-+ * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface.
-+ *
- * @NL80211_CMD_MAX: highest used command number
- * @__NL80211_CMD_AFTER_LAST: internal use
- */
-@@ -487,6 +491,7 @@ enum nl80211_commands {
- NL80211_CMD_NOTIFY_CQM,
-
- NL80211_CMD_SET_CHANNEL,
-+ NL80211_CMD_SET_WDS_PEER,
-
- /* add new commands above here */
-
-@@ -686,6 +691,15 @@ enum nl80211_commands {
- * request, the driver will assume that the port is unauthorized until
- * authorized by user space. Otherwise, port is marked authorized by
- * default in station mode.
-+ * @NL80211_ATTR_CONTROL_PORT_ETHERTYPE: A 16-bit value indicating the
-+ * ethertype that will be used for key negotiation. It can be
-+ * specified with the associate and connect commands. If it is not
-+ * specified, the value defaults to 0x888E (PAE, 802.1X). This
-+ * attribute is also used as a flag in the wiphy information to
-+ * indicate that protocols other than PAE are supported.
-+ * @NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT: When included along with
-+ * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, indicates that the custom
-+ * ethertype frames used for key negotiation must not be encrypted.
+ * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes).
+- * @NL80211_ATTR_PLINK_ACTION: action to perform on the mesh peer link.
++ * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link.
+ * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path.
+ * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path
+ * info given for %NL80211_CMD_GET_MPATH, nested attribute described at
+@@ -879,7 +883,9 @@ enum nl80211_commands {
+ * See &enum nl80211_key_default_types.
*
- * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.
- * We recommend using nested, driver-specific attributes within this.
-@@ -787,6 +801,33 @@ enum nl80211_commands {
- * This is used in association with @NL80211_ATTR_WIPHY_TX_POWER_SETTING
- * for non-automatic settings.
+ * @NL80211_ATTR_MESH_SETUP: Optional mesh setup parameters. These cannot be
+- * changed once the mesh is active.
++ * changed once the mesh is active.
++ * @NL80211_ATTR_MESH_CONFIG: Mesh configuration parameters, a nested attribute
++ * containing attributes from &enum nl80211_meshconf_params.
*
-+ * @NL80211_ATTR_SUPPORT_IBSS_RSN: The device supports IBSS RSN, which mostly
-+ * means support for per-station GTKs.
-+ *
-+ * @NL80211_ATTR_WIPHY_ANTENNA_TX: Bitmap of allowed antennas for transmitting.
-+ * This can be used to mask out antennas which are not attached or should
-+ * not be used for transmitting. If an antenna is not selected in this
-+ * bitmap the hardware is not allowed to transmit on this antenna.
-+ *
-+ * Each bit represents one antenna, starting with antenna 1 at the first
-+ * bit. Depending on which antennas are selected in the bitmap, 802.11n
-+ * drivers can derive which chainmasks to use (if all antennas belonging to
-+ * a particular chain are disabled this chain should be disabled) and if
-+ * a chain has diversity antennas wether diversity should be used or not.
-+ * HT capabilities (STBC, TX Beamforming, Antenna selection) can be
-+ * derived from the available chains after applying the antenna mask.
-+ * Non-802.11n drivers can derive wether to use diversity or not.
-+ * Drivers may reject configurations or RX/TX mask combinations they cannot
-+ * support by returning -EINVAL.
-+ *
-+ * @NL80211_ATTR_WIPHY_ANTENNA_RX: Bitmap of allowed antennas for receiving.
-+ * This can be used to mask out antennas which are not attached or should
-+ * not be used for receiving. If an antenna is not selected in this bitmap
-+ * the hardware should not be configured to receive on this antenna.
-+ * For a more detailed descripton see @NL80211_ATTR_WIPHY_ANTENNA_TX.
-+ *
-+ * @NL80211_ATTR_MCAST_RATE: Multicast tx rate (in 100 kbps) for IBSS
-+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
- */
-@@ -951,6 +992,16 @@ enum nl80211_attrs {
- NL80211_ATTR_RX_FRAME_TYPES,
- NL80211_ATTR_FRAME_TYPE,
-
-+ NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
-+ NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT,
-+
-+ NL80211_ATTR_SUPPORT_IBSS_RSN,
-+
-+ NL80211_ATTR_WIPHY_ANTENNA_TX,
-+ NL80211_ATTR_WIPHY_ANTENNA_RX,
-+
-+ NL80211_ATTR_MCAST_RATE,
-+
- /* add attributes here, update the policy in nl80211.c */
-
- __NL80211_ATTR_AFTER_LAST,
-@@ -1006,6 +1057,8 @@ enum nl80211_attrs {
- * @NL80211_IFTYPE_WDS: wireless distribution interface
- * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames
- * @NL80211_IFTYPE_MESH_POINT: mesh point
-+ * @NL80211_IFTYPE_P2P_CLIENT: P2P client
-+ * @NL80211_IFTYPE_P2P_GO: P2P group owner
- * @NL80211_IFTYPE_MAX: highest interface type number currently defined
- * @NUM_NL80211_IFTYPES: number of defined interface types
- *
-@@ -1022,6 +1075,8 @@ enum nl80211_iftype {
- NL80211_IFTYPE_WDS,
- NL80211_IFTYPE_MONITOR,
- NL80211_IFTYPE_MESH_POINT,
-+ NL80211_IFTYPE_P2P_CLIENT,
-+ NL80211_IFTYPE_P2P_GO,
-
- /* keep last */
- NUM_NL80211_IFTYPES,
-@@ -1111,6 +1166,8 @@ enum nl80211_rate_info {
- * @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station)
- * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this
- * station)
-+ * @NL80211_STA_INFO_TX_RETRIES: total retries (u32, to this station)
-+ * @NL80211_STA_INFO_TX_FAILED: total failed packets (u32, to this station)
+@@ -1225,8 +1231,6 @@ enum nl80211_rate_info {
+ * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs)
+ * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station)
+ * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station)
+- * @__NL80211_STA_INFO_AFTER_LAST: internal
+- * @NL80211_STA_INFO_MAX: highest possible station info attribute
+ * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
+ * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
+ * containing info as possible, see &enum nl80211_sta_info_txrate.
+@@ -1236,6 +1240,13 @@ enum nl80211_rate_info {
+ * @NL80211_STA_INFO_TX_RETRIES: total retries (u32, to this station)
+ * @NL80211_STA_INFO_TX_FAILED: total failed packets (u32, to this station)
+ * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm)
++ * @NL80211_STA_INFO_LLID: the station's mesh LLID
++ * @NL80211_STA_INFO_PLID: the station's mesh PLID
++ * @NL80211_STA_INFO_PLINK_STATE: peer link state for the station
++ * @NL80211_STA_INFO_RX_BITRATE: last unicast rx rate, nested attribute
++ * containing info as possible, see &enum nl80211_sta_info_txrate.
++ * @__NL80211_STA_INFO_AFTER_LAST: internal
++ * @NL80211_STA_INFO_MAX: highest possible station info attribute
*/
enum nl80211_sta_info {
__NL80211_STA_INFO_INVALID,
-@@ -1124,6 +1181,8 @@ enum nl80211_sta_info {
- NL80211_STA_INFO_TX_BITRATE,
- NL80211_STA_INFO_RX_PACKETS,
- NL80211_STA_INFO_TX_PACKETS,
-+ NL80211_STA_INFO_TX_RETRIES,
-+ NL80211_STA_INFO_TX_FAILED,
+@@ -1252,6 +1263,7 @@ enum nl80211_sta_info {
+ NL80211_STA_INFO_TX_RETRIES,
+ NL80211_STA_INFO_TX_FAILED,
+ NL80211_STA_INFO_SIGNAL_AVG,
++ NL80211_STA_INFO_RX_BITRATE,
/* keep last */
__NL80211_STA_INFO_AFTER_LAST,
-@@ -1277,7 +1336,11 @@ enum nl80211_bitrate_attr {
- * wireless core it thinks its knows the regulatory domain we should be in.
- * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an
- * 802.11 country information element with regulatory information it
-- * thinks we should consider.
-+ * thinks we should consider. cfg80211 only processes the country
-+ * code from the IE, and relies on the regulatory domain information
-+ * structure pased by userspace (CRDA) from our wireless-regdb.
-+ * If a channel is enabled but the country code indicates it should
-+ * be disabled we disable the channel and re-enable it upon disassociation.
- */
- enum nl80211_reg_initiator {
- NL80211_REGDOM_SET_BY_CORE,
-@@ -1382,6 +1445,17 @@ enum nl80211_reg_rule_flags {
- * @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved
- * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel
- * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm)
-+ * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used
-+ * @NL80211_SURVEY_INFO_CHANNEL_TIME: amount of time (in ms) that the radio
-+ * spent on this channel
-+ * @NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY: amount of the time the primary
-+ * channel was sensed busy (either due to activity or energy detect)
-+ * @NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: amount of time the extension
-+ * channel was sensed busy
-+ * @NL80211_SURVEY_INFO_CHANNEL_TIME_RX: amount of time the radio spent
-+ * receiving data
-+ * @NL80211_SURVEY_INFO_CHANNEL_TIME_TX: amount of time the radio spent
-+ * transmitting data
- * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
- * currently defined
- * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
-@@ -1390,6 +1464,12 @@ enum nl80211_survey_info {
- __NL80211_SURVEY_INFO_INVALID,
- NL80211_SURVEY_INFO_FREQUENCY,
- NL80211_SURVEY_INFO_NOISE,
-+ NL80211_SURVEY_INFO_IN_USE,
-+ NL80211_SURVEY_INFO_CHANNEL_TIME,
-+ NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY,
-+ NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY,
-+ NL80211_SURVEY_INFO_CHANNEL_TIME_RX,
-+ NL80211_SURVEY_INFO_CHANNEL_TIME_TX,
-
- /* keep last */
- __NL80211_SURVEY_INFO_AFTER_LAST,
-@@ -1636,11 +1716,14 @@ enum nl80211_auth_type {
- * @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key
- * @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key
- * @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS)
-+ * @NUM_NL80211_KEYTYPES: number of defined key types
- */
- enum nl80211_key_type {
- NL80211_KEYTYPE_GROUP,
- NL80211_KEYTYPE_PAIRWISE,
- NL80211_KEYTYPE_PEERKEY,
-+
-+ NUM_NL80211_KEYTYPES
- };
-
- /**
-@@ -1671,6 +1754,9 @@ enum nl80211_wpa_versions {
- * CCMP keys, each six bytes in little endian
- * @NL80211_KEY_DEFAULT: flag indicating default key
- * @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key
-+ * @NL80211_KEY_TYPE: the key type from enum nl80211_key_type, if not
-+ * specified the default depends on whether a MAC address was
-+ * given with the command using the key or not (u32)
- * @__NL80211_KEY_AFTER_LAST: internal
- * @NL80211_KEY_MAX: highest key attribute
+@@ -1626,7 +1638,7 @@ enum nl80211_mntr_flags {
+ * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs)
+ * that it takes for an HWMP information element to propagate across the mesh
+ *
+- * @NL80211_MESHCONF_ROOTMODE: whether root mode is enabled or not
++ * @NL80211_MESHCONF_HWMP_ROOTMODE: whether root mode is enabled or not
+ *
+ * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a
+ * source mesh point for path selection elements.
+@@ -1678,6 +1690,7 @@ enum nl80211_meshconf_params {
+ * element that vendors will use to identify the path selection methods and
+ * metrics in use.
+ *
++ * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
+ * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use
*/
-@@ -1682,6 +1768,7 @@ enum nl80211_key_attributes {
- NL80211_KEY_SEQ,
- NL80211_KEY_DEFAULT,
- NL80211_KEY_DEFAULT_MGMT,
-+ NL80211_KEY_TYPE,
-
- /* keep last */
- __NL80211_KEY_AFTER_LAST,
+ enum nl80211_mesh_setup_params {
diff --git a/package/iw/patches/100-survey_freq_in_use.patch b/package/iw/patches/100-survey_freq_in_use.patch
deleted file mode 100644
index 3933ae379f3e32782ce5966d8acae5a6cbaa280f..0000000000000000000000000000000000000000
--- a/package/iw/patches/100-survey_freq_in_use.patch
+++ /dev/null
@@ -1,14 +0,0 @@
---- a/survey.c
-+++ b/survey.c
-@@ -44,8 +44,9 @@ static int print_survey_handler(struct n
- }
-
- if (sinfo[NL80211_SURVEY_INFO_FREQUENCY])
-- printf("\tfrequency:\t%u MHz\n",
-- nla_get_u32(sinfo[NL80211_SURVEY_INFO_FREQUENCY]));
-+ printf("\tfrequency:\t%u MHz%s\n",
-+ nla_get_u32(sinfo[NL80211_SURVEY_INFO_FREQUENCY]),
-+ sinfo[NL80211_SURVEY_INFO_IN_USE] ? " [in use]" : "");
- if (sinfo[NL80211_SURVEY_INFO_NOISE])
- printf("\tnoise:\t\t%d dBm\n",
- (int8_t)nla_get_u8(sinfo[NL80211_SURVEY_INFO_NOISE]));
diff --git a/package/iw/patches/110-survey_phy_stats.patch b/package/iw/patches/110-survey_phy_stats.patch
deleted file mode 100644
index f7c8a52c9110079b50d43412a70cedaaea9012c8..0000000000000000000000000000000000000000
--- a/package/iw/patches/110-survey_phy_stats.patch
+++ /dev/null
@@ -1,32 +0,0 @@
---- a/survey.c
-+++ b/survey.c
-@@ -44,12 +44,27 @@ static int print_survey_handler(struct n
- }
-
- if (sinfo[NL80211_SURVEY_INFO_FREQUENCY])
-- printf("\tfrequency:\t%u MHz%s\n",
-+ printf("\tfrequency:\t\t\t%u MHz%s\n",
- nla_get_u32(sinfo[NL80211_SURVEY_INFO_FREQUENCY]),
- sinfo[NL80211_SURVEY_INFO_IN_USE] ? " [in use]" : "");
- if (sinfo[NL80211_SURVEY_INFO_NOISE])
-- printf("\tnoise:\t\t%d dBm\n",
-+ printf("\tnoise:\t\t\t\t%d dBm\n",
- (int8_t)nla_get_u8(sinfo[NL80211_SURVEY_INFO_NOISE]));
-+ if (sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME])
-+ printf("\tchannel active time:\t\t%llu ms\n",
-+ (uint64_t)nla_get_u64(sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME]));
-+ if (sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY])
-+ printf("\tchannel busy time:\t\t%llu ms\n",
-+ (uint64_t)nla_get_u64(sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY]));
-+ if (sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY])
-+ printf("\textension channel busy time:\t%llu ms\n",
-+ (uint64_t)nla_get_u64(sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY]));
-+ if (sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_RX])
-+ printf("\tchannel receive time:\t\t%llu ms\n",
-+ (uint64_t)nla_get_u64(sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_RX]));
-+ if (sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_TX])
-+ printf("\tchannel transmit time:\t\t%llu ms\n",
-+ (uint64_t)nla_get_u64(sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_TX]));
- return NL_SKIP;
- }
-
diff --git a/package/iw/patches/120-ibss_mcast_rate.patch b/package/iw/patches/120-ibss_mcast_rate.patch
deleted file mode 100644
index acbd3e89a84c631657e89eea6b1e582191ffa7e1..0000000000000000000000000000000000000000
--- a/package/iw/patches/120-ibss_mcast_rate.patch
+++ /dev/null
@@ -1,32 +0,0 @@
---- a/ibss.c
-+++ b/ibss.c
-@@ -83,6 +83,20 @@ static int join_ibss(struct nl80211_stat
- argc--;
- }
-
-+ /* multicast rate */
-+ if (argc > 1 && strcmp(argv[0], "mcast-rate") == 0) {
-+ argv++;
-+ argc--;
-+
-+ rate = strtod(argv[0], &end);
-+ if (*end != '\0')
-+ return 1;
-+
-+ NLA_PUT_U32(msg, NL80211_ATTR_MCAST_RATE, (int) rate * 10);
-+ argv++;
-+ argc--;
-+ }
-+
- if (!argc)
- return 0;
-
-@@ -109,7 +123,7 @@ COMMAND(ibss, leave, NULL,
- "Leave the current IBSS cell.");
- COMMAND(ibss, join,
- "<SSID> <freq in MHz> [fixed-freq] [<fixed bssid>] "
-- "[basic-rates <rate in Mbps,rate2,...>] [key d:0:abcde]",
-+ "[basic-rates <rate in Mbps,rate2,...>] [mcast-rate <rate in Mbps>] [key d:0:abcde]",
- NL80211_CMD_JOIN_IBSS, 0, CIB_NETDEV, join_ibss,
- "Join the IBSS cell with the given SSID, if it doesn't exist create\n"
- "it on the given frequency. When fixed frequency is requested, don't\n"
diff --git a/package/iw/patches/302-sta-retries.patch b/package/iw/patches/302-sta-retries.patch
deleted file mode 100644
index 8c1ce13efc2a87a781045421a4bbd5eced86345f..0000000000000000000000000000000000000000
--- a/package/iw/patches/302-sta-retries.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-iw: print station retry counters
-
-From: Bruno Randolf <br1@einfach.org>
-
-Signed-off-by: Bruno Randolf <br1@einfach.org>
----
- station.c | 8 ++++++++
- 1 files changed, 8 insertions(+), 0 deletions(-)
-
---- a/station.c
-+++ b/station.c
-@@ -48,6 +48,8 @@ static int print_sta_handler(struct nl_m
- [NL80211_STA_INFO_LLID] = { .type = NLA_U16 },
- [NL80211_STA_INFO_PLID] = { .type = NLA_U16 },
- [NL80211_STA_INFO_PLINK_STATE] = { .type = NLA_U8 },
-+ [NL80211_STA_INFO_TX_RETRIES] = { .type = NLA_U32 },
-+ [NL80211_STA_INFO_TX_FAILED] = { .type = NLA_U32 },
- };
-
- static struct nla_policy rate_policy[NL80211_RATE_INFO_MAX + 1] = {
-@@ -96,6 +98,12 @@ static int print_sta_handler(struct nl_m
- if (sinfo[NL80211_STA_INFO_TX_PACKETS])
- printf("\n\ttx packets:\t%u",
- nla_get_u32(sinfo[NL80211_STA_INFO_TX_PACKETS]));
-+ if (sinfo[NL80211_STA_INFO_TX_RETRIES])
-+ printf("\n\ttx retries:\t%u",
-+ nla_get_u32(sinfo[NL80211_STA_INFO_TX_RETRIES]));
-+ if (sinfo[NL80211_STA_INFO_TX_FAILED])
-+ printf("\n\ttx failed:\t%u",
-+ nla_get_u32(sinfo[NL80211_STA_INFO_TX_FAILED]));
- if (sinfo[NL80211_STA_INFO_SIGNAL])
- printf("\n\tsignal: \t%d dBm",
- (int8_t)nla_get_u8(sinfo[NL80211_STA_INFO_SIGNAL]));
diff --git a/package/iw/patches/401-antenna.patch b/package/iw/patches/401-antenna.patch
deleted file mode 100644
index 62f37c2e2d4f3862ad05dc39cff700038ab9ba55..0000000000000000000000000000000000000000
--- a/package/iw/patches/401-antenna.patch
+++ /dev/null
@@ -1,87 +0,0 @@
-iw: Add antenna configuration commands
-
-From: Bruno Randolf <br1@einfach.org>
-
-Add command to set the antenna configuration (iw phyX set antenna ...) and
-include antenna setting in wiphy information (iw phyX info).
-
-iw phyX set antenna all | <bitmap> | <tx bitmap> <rx bitmap>
-
-Signed-off-by: Bruno Randolf <br1@einfach.org>
-
-v8: Simplfied option parser as requested.
----
- info.c | 7 +++++++
- phy.c | 39 +++++++++++++++++++++++++++++++++++++++
- 2 files changed, 46 insertions(+), 0 deletions(-)
-
---- a/info.c
-+++ b/info.c
-@@ -168,6 +168,13 @@ static int print_phy_handler(struct nl_m
- printf("\tCoverage class: %d (up to %dm)\n", coverage, 450 * coverage);
- }
-
-+ if (tb_msg[NL80211_ATTR_WIPHY_ANTENNA_TX] &&
-+ tb_msg[NL80211_ATTR_WIPHY_ANTENNA_RX]) {
-+ printf("\tAntenna: TX %#x RX %#x\n",
-+ nla_get_u32(tb_msg[NL80211_ATTR_WIPHY_ANTENNA_TX]),
-+ nla_get_u32(tb_msg[NL80211_ATTR_WIPHY_ANTENNA_RX]));
-+ }
-+
- if (tb_msg[NL80211_ATTR_SUPPORTED_IFTYPES]) {
- printf("\tSupported interface modes:\n");
- nla_for_each_nested(nl_mode, tb_msg[NL80211_ATTR_SUPPORTED_IFTYPES], rem_mode)
---- a/phy.c
-+++ b/phy.c
-@@ -307,3 +307,51 @@ COMMAND(set, txpower, "<auto|fixed|limit
- COMMAND(set, txpower, "<auto|fixed|limit> [<tx power in mBm>]",
- NL80211_CMD_SET_WIPHY, 0, CIB_NETDEV, handle_txpower,
- "Specify transmit power level and setting type.");
-+
-+static int handle_antenna(struct nl80211_state *state,
-+ struct nl_cb *cb,
-+ struct nl_msg *msg,
-+ int argc, char **argv)
-+{
-+ char *end;
-+ uint32_t tx_ant = 0, rx_ant = 0;
-+
-+ if (argc == 1) {
-+ if (strcmp(argv[0], "all") == 0)
-+ tx_ant = rx_ant = 0xffffffff;
-+ else {
-+ tx_ant = rx_ant = strtoul(argv[0], &end, 0);
-+ if (*end)
-+ return 1;
-+ }
-+ }
-+ else if (argc == 2) {
-+ if (strcmp(argv[0], "all") == 0)
-+ tx_ant = 0xffffffff;
-+ else {
-+ tx_ant = strtoul(argv[0], &end, 0);
-+ if (*end)
-+ return 1;
-+ }
-+ if (strcmp(argv[1], "all") == 0)
-+ rx_ant = 0xffffffff;
-+ else {
-+ rx_ant = strtoul(argv[1], &end, 0);
-+ if (*end)
-+ return 1;
-+ }
-+ } else
-+ return 1;
-+
-+ NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_ANTENNA_TX, tx_ant);
-+ NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_ANTENNA_RX, rx_ant);
-+
-+ return 0;
-+
-+ nla_put_failure:
-+ return -ENOBUFS;
-+}
-+COMMAND(set, antenna, "<bitmap> | all | <tx bitmap> <rx bitmap>",
-+ NL80211_CMD_SET_WIPHY, 0, CIB_PHY, handle_antenna,
-+ "Set a bitmap of allowed antennas to use for TX and RX.\n"
-+ "The driver may reject antenna configurations it cannot support.");
diff --git a/package/iw/patches/500-sta-signal-avg.patch b/package/iw/patches/500-sta-signal-avg.patch
deleted file mode 100644
index 1cdbdbc149634962844a2b496cef71486aad6dff..0000000000000000000000000000000000000000
--- a/package/iw/patches/500-sta-signal-avg.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-iw: add signal average to station information
-
-From: Bruno Randolf <br1@einfach.org>
-
-
----
- nl80211.h | 1 +
- station.c | 3 +++
- 2 files changed, 4 insertions(+), 0 deletions(-)
-
---- a/nl80211.h
-+++ b/nl80211.h
-@@ -1183,6 +1183,7 @@ enum nl80211_sta_info {
- NL80211_STA_INFO_TX_PACKETS,
- NL80211_STA_INFO_TX_RETRIES,
- NL80211_STA_INFO_TX_FAILED,
-+ NL80211_STA_INFO_SIGNAL_AVG,
-
- /* keep last */
- __NL80211_STA_INFO_AFTER_LAST,
---- a/station.c
-+++ b/station.c
-@@ -107,6 +107,9 @@ static int print_sta_handler(struct nl_m
- if (sinfo[NL80211_STA_INFO_SIGNAL])
- printf("\n\tsignal: \t%d dBm",
- (int8_t)nla_get_u8(sinfo[NL80211_STA_INFO_SIGNAL]));
-+ if (sinfo[NL80211_STA_INFO_SIGNAL_AVG])
-+ printf("\n\tsignal avg:\t%d dBm",
-+ (int8_t)nla_get_u8(sinfo[NL80211_STA_INFO_SIGNAL_AVG]));
-
- if (sinfo[NL80211_STA_INFO_TX_BITRATE]) {
- if (nla_parse_nested(rinfo, NL80211_RATE_INFO_MAX,
diff --git a/package/iw/patches/501-ibss-bintval.patch b/package/iw/patches/501-ibss-bintval.patch
deleted file mode 100644
index 791e2a0716b4b859ecfc62a1602d3e218783a33f..0000000000000000000000000000000000000000
--- a/package/iw/patches/501-ibss-bintval.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-iw: Add ibss join parameter for beacon interval
-
-From: Bruno Randolf <br1@einfach.org>
-
-NL80211_ATTR_BEACON_INTERVAL already exists, we just have to use it.
-
-Signed-off-by: Bruno Randolf <br1@einfach.org>
----
- ibss.c | 19 ++++++++++++++++---
- 1 files changed, 16 insertions(+), 3 deletions(-)
-
---- a/ibss.c
-+++ b/ibss.c
-@@ -26,6 +26,7 @@ static int join_ibss(struct nl80211_stat
- int n_rates = 0;
- char *value = NULL, *sptr = NULL;
- float rate;
-+ int bintval;
-
- if (argc < 2)
- return 1;
-@@ -57,6 +58,17 @@ static int join_ibss(struct nl80211_stat
- }
- }
-
-+ if (argc > 1 && strcmp(argv[0], "beacon-interval") == 0) {
-+ argv++;
-+ argc--;
-+ bintval = strtoul(argv[0], &end, 10);
-+ if (*end != '\0')
-+ return 1;
-+ NLA_PUT_U32(msg, NL80211_ATTR_BEACON_INTERVAL, bintval);
-+ argv++;
-+ argc--;
-+ }
-+
- /* basic rates */
- if (argc > 1 && strcmp(argv[0], "basic-rates") == 0) {
- argv++;
-@@ -122,11 +134,12 @@ COMMAND(ibss, leave, NULL,
- NL80211_CMD_LEAVE_IBSS, 0, CIB_NETDEV, leave_ibss,
- "Leave the current IBSS cell.");
- COMMAND(ibss, join,
-- "<SSID> <freq in MHz> [fixed-freq] [<fixed bssid>] "
-- "[basic-rates <rate in Mbps,rate2,...>] [mcast-rate <rate in Mbps>] [key d:0:abcde]",
-+ "<SSID> <freq in MHz> [fixed-freq] [<fixed bssid>] [beacon-interval "
-+ "<TU>] [basic-rates <rate in Mbps,rate2,...>] [mcast-rate <rate in Mbps>] [key d:0:abcde]",
- NL80211_CMD_JOIN_IBSS, 0, CIB_NETDEV, join_ibss,
- "Join the IBSS cell with the given SSID, if it doesn't exist create\n"
- "it on the given frequency. When fixed frequency is requested, don't\n"
- "join/create a cell on a different frequency. When a fixed BSSID is\n"
- "requested use that BSSID and do not adopt another cell's BSSID even\n"
-- "if it has higher TSF and the same SSID.");
-+ "if it has higher TSF and the same SSID. If an IBSS is created, create\n"
-+ "it with the specified basic-rates and beacon-interval (in TU).");